ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-24 07:46:48 +00:00
Code Issues Actions 5 Packages Projects Releases Wiki Activity

apm821xx: WNDAP660: fix ethernet port ordering

Browse Source 
Tim Small reported:
| Viewing the 'Network' -> 'Switch' config page in LuCI:
|
| The LuCI LAN 1 port corresponds to the port physically
|     labelled 2 at the rear of the device.
| [...]
|
| When a patch cord is attached to the port labelled 1 [...],
| the LED labelled °2 illuminates.

=> essentially, the Ports and LEDs are reversed.

Reported-by: Tim Small
Fixes: #10111
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit 36483600d3)
This commit is contained in:
Christian Lamparter 2022-06-24 20:55:15 +02:00
parent 7bc1d76419
commit a4390ea283
4 changed files with 13 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
target/linux/apm821xx/base-files/etc/board.d/01_leds
View File

@ -30,10 +30,10 @@ netgear,wndap620)
netgear,wndap660)
ucidef_set_led_netdev "lan_act" "LAN (Activity)" "green:activity" "eth0"
ucidef_set_led_switch "lan1_100" "LAN 100Mbps" "amber:lan-0" "switch0" "0x04" "0x04" "link"
ucidef_set_led_switch "lan1_1000" "LAN 1000Mbps" "green:lan-0" "switch0" "0x04" "0x08" "link"
ucidef_set_led_switch "lan2_100" "LAN 100Mbps" "amber:lan-1" "switch0" "0x02" "0x04" "link"
ucidef_set_led_switch "lan2_1000" "LAN 1000Mbps" "green:lan-1" "switch0" "0x02" "0x08" "link"
ucidef_set_led_switch "lan1_100" "LAN 100Mbps" "amber:lan-1" "switch0" "0x02" "0x04" "link"
ucidef_set_led_switch "lan1_1000" "LAN 1000Mbps" "green:lan-1" "switch0" "0x02" "0x08" "link"
ucidef_set_led_switch "lan2_100" "LAN 100Mbps" "amber:lan-2" "switch0" "0x04" "0x04" "link"
ucidef_set_led_switch "lan2_1000" "LAN 1000Mbps" "green:lan-2" "switch0" "0x04" "0x08" "link"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan-0" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan-1" "phy1tpt"
;;

2
target/linux/apm821xx/base-files/etc/board.d/02_network
View File

@ -16,7 +16,7 @@ netgear,wndap620)
ucidef_add_switch "switch0" "2:lan" "5@eth0"
;;
netgear,wndap660)
ucidef_add_switch "switch0" "1:lan:2" "2:lan:1" "5@eth0"
ucidef_add_switch "switch0" "1:lan" "2:lan" "5@eth0"
;;
meraki,mx60|\
netgear,wndr4700)

4
target/linux/apm821xx/base-files/etc/uci-defaults/04_led_migration
View File

@ -32,9 +32,9 @@ netgear,wndap660)
":test=:fault" \
":wlan2g=:wlan-0" \
":wlan5g=:wlan-1" \
":lan1-link100=:lan-0" \
":lan1-link100=:lan-1" \
":lan1-link1000=:lan-1" \
":lan2-link100=:lan-1" \
":lan2-link100=:lan-2" \
":lan2-link1000=:lan-2"
;;
netgear,wndr4700)

12
target/linux/apm821xx/dts/netgear-wndap660.dts
View File

@ -14,28 +14,28 @@
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <1>;
gpios = <&GPIO0 22 GPIO_ACTIVE_HIGH>;
gpios = <&GPIO0 9 GPIO_ACTIVE_HIGH>;
};
led-6 {
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_LAN;
function-enumerator = <0>;
gpios = <&GPIO0 23 GPIO_ACTIVE_HIGH>;
function-enumerator = <1>;
gpios = <&GPIO0 10 GPIO_ACTIVE_HIGH>;
};
led-7 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_LAN;
function-enumerator = <2>;
gpios = <&GPIO0 9 GPIO_ACTIVE_HIGH>;
gpios = <&GPIO0 22 GPIO_ACTIVE_HIGH>;
};
led-8 {
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_LAN;
function-enumerator = <1>;
gpios = <&GPIO0 10 GPIO_ACTIVE_HIGH>;
function-enumerator = <2>;
gpios = <&GPIO0 23 GPIO_ACTIVE_HIGH>;
};
};