diff --git a/package/boot/uboot-envtools/files/ipq807x b/package/boot/uboot-envtools/files/ipq807x index 345cdadebee..0185c2c8e6f 100644 --- a/package/boot/uboot-envtools/files/ipq807x +++ b/package/boot/uboot-envtools/files/ipq807x @@ -36,11 +36,6 @@ xiaomi,ax9000) [ -n "$idx2" ] && \ ubootenv_add_uci_sys_config "/dev/mtd$idx2" "0x0" "0x10000" "0x20000" ;; -prpl,haze) - mmcpart="$(find_mmc_part 0:APPSBLENV)" - [ -n "$mmcpart" ] && \ - ubootenv_add_uci_config "$mmcpart" "0x0" "0x40000" "0x400" "0x100" - ;; qnap,301w) idx="$(find_mtd_index 0:appsblenv)" [ -n "$idx" ] && \ diff --git a/target/linux/ipq807x/base-files/etc/board.d/02_network b/target/linux/ipq807x/base-files/etc/board.d/02_network index 8175a99f97e..edd1e131b66 100644 --- a/target/linux/ipq807x/base-files/etc/board.d/02_network +++ b/target/linux/ipq807x/base-files/etc/board.d/02_network @@ -25,9 +25,6 @@ ipq807x_setup_interfaces() netgear,wax218) ucidef_set_interface_lan "lan" "dhcp" ;; - prpl,haze) - ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan" - ;; qnap,301w) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g-2" "10g-1" ;; diff --git a/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata b/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata index f9315573ec4..ddb0737d209 100644 --- a/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata +++ b/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata @@ -22,17 +22,10 @@ case "$FIRMWARE" in zyxel,nbg7815) caldata_extract "0:art" 0x1000 0x20000 ;; - prpl,haze) - caldata_extract_mmc "0:ART" 0x1000 0x20000 - ;; esac ;; -"ath11k/QCN9074/hw1.0/cal-pci-0000:01:00.0.bin"|\ -"ath11k/QCN9074/hw1.0/cal-pci-0001:01:00.0.bin") +"ath11k/QCN9074/hw1.0/cal-pci-0000:01:00.0.bin") case "$board" in - prpl,haze) - caldata_extract_mmc "0:ART" 0x26800 0x20000 - ;; xiaomi,ax9000) caldata_extract "0:art" 0x26800 0x20000 ;; diff --git a/target/linux/ipq807x/base-files/lib/upgrade/platform.sh b/target/linux/ipq807x/base-files/lib/upgrade/platform.sh index 458eb16b795..f7c47723150 100644 --- a/target/linux/ipq807x/base-files/lib/upgrade/platform.sh +++ b/target/linux/ipq807x/base-files/lib/upgrade/platform.sh @@ -71,7 +71,6 @@ platform_do_upgrade() { netgear,wax218) nand_do_upgrade "$1" ;; - prpl,haze|\ qnap,301w) kernelname="0:HLOS" rootfsname="rootfs" diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts deleted file mode 100644 index e47561ad5f3..00000000000 --- a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts +++ /dev/null @@ -1,311 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/dts-v1/; - -#include "ipq8074.dtsi" -#include "ipq8074-hk-cpu.dtsi" -#include "ipq8074-ess.dtsi" -#include -#include -#include - -/ { - model = "prpl Foundation Haze"; - compatible = "prpl,haze", "qcom,ipq8074"; - - aliases { - serial0 = &blsp1_uart5; - /* Aliases are required by U-Boot to patch MAC addresses */ - ethernet0 = &dp6_syn; - ethernet1 = &dp4; - ethernet2 = &dp3; - ethernet3 = &dp2; - label-mac-device = &dp6_syn; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wps-button { - label = "wps"; - gpios = <&tlmm 42 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset-button { - label = "reset"; - gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&tlmm { - mdio_pins: mdio-state { - mdc-pins { - pins = "gpio68"; - function = "mdc"; - drive-strength = <8>; - bias-pull-up; - }; - - mdio-pins { - pins = "gpio69"; - function = "mdio"; - drive-strength = <8>; - bias-pull-up; - }; - }; - - button_pins: button-state { - wps-pins { - pins = "gpio42"; - function = "gpio"; - drive-strength = <8>; - bias-pull-up; - }; - - rst-pins { - pins = "gpio44"; - function = "gpio"; - drive-strength = <8>; - bias-pull-up; - }; - }; -}; - -&blsp1_uart5 { - status = "okay"; -}; - -&prng { - status = "okay"; -}; - -&ssphy_0 { - status = "okay"; -}; - -&qusb_phy_0 { - status = "okay"; -}; - -&ssphy_1 { - status = "okay"; -}; - -&qusb_phy_1 { - status = "okay"; -}; - -&usb_0 { - status = "okay"; -}; - -&usb_1 { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&crypto { - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&blsp1_spi1 { /* BLSP1 QUP1 */ - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - cs-gpios = <0>; - status = "okay"; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <50000000>; - - partitions { - compatible = "qcom,smem-part"; - }; - }; -}; - -&mdio { - status = "okay"; - - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>; - - qca8075_1: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - }; - - qca8075_2: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; - - qca8075_3: ethernet-phy@2 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <2>; - }; - - qca8075_4: ethernet-phy@3 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <3>; - }; - - aqr113c: ethernet-phy@5 { - compatible ="ethernet-phy-ieee802.3-c45"; - reg = <8>; - reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; - }; -}; - -&sdhc_1 { - status = "okay"; - - mmc-hs400-1_8v; - mmc-hs200-1_8v; - mmc-ddr-1_8v; - vqmmc-supply = <&l11>; -}; - -&switch { - status = "okay"; - - switch_cpu_bmp = <0x1>; /* cpu port bitmap */ - switch_lan_bmp = <0x1e>; /* lan port bitmap */ - switch_wan_bmp = <0x60>; /* wan port bitmap */ - switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/ - switch_mac_mode1 = <0xe>; /* mac mode for uniphy instance1*/ - switch_mac_mode2 = <0xd>; /* mac mode for uniphy instance2*/ - bm_tick_mode = <0>; /* bm tick mode */ - tm_tick_mode = <0>; /* tm tick mode */ - - qcom,port_phyinfo { - port@0 { - port_id = <1>; - phy_address = <0>; - }; - port@1 { - port_id = <2>; - phy_address = <1>; - }; - port@2 { - port_id = <3>; - phy_address = <2>; - }; - port@3 { - port_id = <4>; - phy_address = <3>; - }; - port@4 { - port_id = <6>; - phy_address = <8>; - compatible = "ethernet-phy-ieee802.3-c45"; - ethernet-phy-ieee802.3-c45; - }; - }; -}; - -&edma { - status = "okay"; -}; - -/* Dummy LAN port */ -&dp1 { - status = "disabled"; - phy-handle = <&qca8075_1>; - label = "lan4"; -}; - -&dp2 { - status = "okay"; - phy-handle = <&qca8075_2>; - label = "lan3"; -}; - -&dp3 { - status = "okay"; - phy-handle = <&qca8075_3>; - label = "lan2"; -}; - -&dp4 { - status = "okay"; - phy-handle = <&qca8075_4>; - label = "lan1"; -}; - -&dp6_syn { - status = "okay"; - qcom,mactype = <1>; - phy-handle = <&aqr113c>; - label = "wan"; -}; - -&pcie_qmp0 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - - perst-gpio = <&tlmm 58 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00020000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - }; -}; - -&pcie_qmp1 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; - - perst-gpio = <&tlmm 61 GPIO_ACTIVE_LOW>; - - bridge@1,0 { - reg = <0x00010000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - status = "okay"; - - /* ath11k has no DT compatible for PCI cards */ - compatible = "pci17cb,1104"; - reg = <0x00010000 0 0 0 0>; - - qcom,ath11k-calibration-variant = "prpl-Haze"; - }; - }; -}; - -&wifi { - status = "okay"; - - qcom,ath11k-calibration-variant = "prpl-Haze"; -}; diff --git a/target/linux/ipq807x/image/generic.mk b/target/linux/ipq807x/image/generic.mk index 92a1e37828a..1ea42845f01 100644 --- a/target/linux/ipq807x/image/generic.mk +++ b/target/linux/ipq807x/image/generic.mk @@ -108,18 +108,6 @@ define Device/netgear_wax218 endef TARGET_DEVICES += netgear_wax218 -define Device/prpl_haze - $(call Device/FitImage) - $(call Device/EmmcImage) - DEVICE_VENDOR := prpl Foundation - DEVICE_MODEL := Haze - DEVICE_DTS_CONFIG := config@hk09 - SOC := ipq8072 - DEVICE_PACKAGES += ath11k-firmware-qcn9074 ipq-wifi-prpl_haze kmod-ath11k-pci - DEFAULT_PACKAGES += ath11k-firmware-qcn9074 ipq-wifi-prpl_haze kmod-ath11k-pci -endef -TARGET_DEVICES += prpl_haze - define Device/qnap_301w $(call Device/FitImage) $(call Device/EmmcImage)