mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 14:37:57 +00:00
ath79: add support for D-Link COVR-P2500 A1
Specifications: * QCA9563, 16 MiB flash, 128 MiB RAM, 2T2R 802.11n * QCA9886 2T2R 801.11ac Wave 2 * QCA7550 Homeplug AV2 1300 * AR8337, 3 Gigabit ports (1, 2: LAN; 3: WAN) To make use of PLC functionality, firmware needs to be provided via plchost (QCA7550 comes without SPI NOR), patched with the Network Password and MAC. Flashing via OEM Web Interface * Flash 'factory.bin' using web-interface * Wait until firmware succesfully installed and device booted * Hold down reset button to reset factory defaults (~10 seconds) Flashing via Recovery Web Interface: * Hold down reset button during power-on (~10 seconds) * Recovery Web UI is at 192.168.0.50, no DHCP. * Flash 'recovery.bin' with scripts/flashing/dlink_recovery_upload.py (Recovery Web UI does not work with modern OSes) Return to stock * Hold down reset button during power-on (~10 seconds) * Recovery Web UI is at 192.168.0.50, no DHCP. * Flash unencrypted stock firmware with scripts/flashing/dlink_recovery_upload.py (Recovery Web UI does not work with modern OSes) Co-developed-by: Sebastian Schaper <openwrt@sebastianschaper.net> Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net> Signed-off-by: Daniel Linjama <daniel@dev.linjama.com>
This commit is contained in:
Daniel Linjama
Hauke Mehrtens
parent
77368ec01b
commit
a39a49e323
211
target/linux/ath79/dts/qca9563_dlink_covr-p2500-a1.dts
Normal file
211
target/linux/ath79/dts/qca9563_dlink_covr-p2500-a1.dts
Normal file
@ -0,0 +1,211 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qca956x.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/mtd/partitions/uimage.h>
|
||||
|
||||
/ {
|
||||
compatible = "dlink,covr-p2500-a1", "qca,qca9563";
|
||||
model = "D-Link COVR-P2500 A1";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_power_red;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_red;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&jtag_disable_pins>;
|
||||
|
||||
lan {
|
||||
label = "green:lan";
|
||||
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_green: power_green {
|
||||
label = "green:power";
|
||||
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "green:wlan5g";
|
||||
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0radio";
|
||||
};
|
||||
|
||||
led_power_red: power_red {
|
||||
label = "red:power";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
label = "green:wlan2g";
|
||||
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1radio";
|
||||
};
|
||||
};
|
||||
|
||||
virtual_flash {
|
||||
compatible = "mtd-concat";
|
||||
|
||||
devices = <&fwconcat0 &fwconcat1>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
compatible = "openwrt,uimage", "denx,uimage";
|
||||
openwrt,ih-magic = <0x68737173>;
|
||||
label = "firmware";
|
||||
reg = <0x0 0x0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
fwconcat0: partition@50000 {
|
||||
label = "fwconcat0";
|
||||
reg = <0x50000 0xe30000>;
|
||||
};
|
||||
|
||||
partition@e80000 {
|
||||
label = "loader";
|
||||
reg = <0xe80000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
fwconcat1: partition@e90000 {
|
||||
label = "fwconcat1";
|
||||
reg = <0xe90000 0x160000>;
|
||||
};
|
||||
|
||||
art: partition@ff0000 {
|
||||
label = "art";
|
||||
reg = <0xff0000 0x10000>;
|
||||
read-only;
|
||||
|
||||
compatible = "nvmem-cells";
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
calibration_ath9k: calibration@1000 {
|
||||
reg = <0x1000 0x440>;
|
||||
};
|
||||
|
||||
precalibration_ath10k: pre-calibration@5000 {
|
||||
reg = <0x5000 0x2f20>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
|
||||
wifi@0,0 {
|
||||
compatible = "qcom,ath10k";
|
||||
reg = <0 0 0 0 0>;
|
||||
|
||||
nvmem-cells = <&precalibration_ath10k>;
|
||||
nvmem-cell-names = "pre-calibration";
|
||||
};
|
||||
};
|
||||
|
||||
&gpio {
|
||||
phy-reset {
|
||||
gpio-hog;
|
||||
gpios = <11 GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "phy-reset";
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
phy-mode = "sgmii";
|
||||
qca,mib-poll-interval = <500>;
|
||||
|
||||
qca,ar8327-initvals = <
|
||||
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
|
||||
0x10 0x81000080 /* POWER_ON_STRAP */
|
||||
0x50 0xcc35cc35 /* LED_CTRL0 */
|
||||
0x54 0xcb37cb37 /* LED_CTRL1 */
|
||||
0x58 0x00000000 /* LED_CTRL2 */
|
||||
0x5c 0x00f3cf00 /* LED_CTRL3 */
|
||||
0x7c 0x0000007e /* PORT0_STATUS */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
pll-data = <0x03000101 0x00000101 0x00001919>;
|
||||
|
||||
phy-mode = "sgmii";
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cells = <&calibration_ath9k>;
|
||||
nvmem-cell-names = "calibration";
|
||||
};
|
||||
@ -230,6 +230,9 @@ devolo,dlan-pro-1200plus-ac|\
|
||||
devolo,magic-2-wifi)
|
||||
ucidef_set_led_netdev "plcw" "dLAN" "white:dlan" "eth0.1" "rx"
|
||||
;;
|
||||
dlink,covr-p2500-a1)
|
||||
ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x0e" "" "link"
|
||||
;;
|
||||
dlink,dap-1330-a1|\
|
||||
dlink,dap-1365-a1)
|
||||
ucidef_set_rssimon "wlan0" "200000" "1"
|
||||
|
||||
@ -286,6 +286,10 @@ ath79_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "2:wan" "3:lan" "4:lan"
|
||||
;;
|
||||
dlink,covr-p2500-a1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "1:lan" "2:lan" "3:wan" "4:plc"
|
||||
;;
|
||||
dlink,dap-2695-a1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "2:lan" "3:wan" "6@eth1"
|
||||
@ -634,6 +638,13 @@ ath79_setup_macs()
|
||||
devolo,magic-2-wifi)
|
||||
label_mac=$(macaddr_add "$(mtd_get_mac_binary art 0x1002)" 3)
|
||||
;;
|
||||
dlink,covr-p2500-a1)
|
||||
lan_mac=$(mtd_get_mac_ascii art "protest_lan_mac")
|
||||
wan_mac=$(mtd_get_mac_ascii art "protest_lan_mac")
|
||||
label_mac=$(mtd_get_mac_ascii art "protest_plc_mac")
|
||||
plc_mac=$(mtd_get_mac_ascii art "protest_plc_mac")
|
||||
[ -n "$plc_mac" ] && ucidef_set_interface_macaddr "plc" $plc_mac
|
||||
;;
|
||||
dlink,dap-1330-a1|\
|
||||
dlink,dap-1365-a1|\
|
||||
dlink,dch-g020-a1)
|
||||
|
||||
@ -17,6 +17,12 @@ case "$board" in
|
||||
adtran,bsap1840)
|
||||
macaddr_add "$(mtd_get_mac_binary 'Board data' 2)" $(($PHYNBR * 8 + 1)) > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
dlink,covr-p2500-a1)
|
||||
[ "$PHYNBR" -eq 0 ] && \
|
||||
mtd_get_mac_ascii art "protest_ath1_mac" > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" -eq 1 ] && \
|
||||
mtd_get_mac_ascii art "protest_ath0_mac" > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
dlink,dap-1330-a1|\
|
||||
dlink,dap-1365-a1|\
|
||||
dlink,dch-g020-a1)
|
||||
|
||||
@ -33,6 +33,17 @@ define Build/cybertan-trx
|
||||
-rm $@-empty.bin
|
||||
endef
|
||||
|
||||
define Build/dlink-sge-signature
|
||||
( \
|
||||
crc=$$(gzip -c $@ | tail -c 8 | od -An -tx4 --endian little | cut -d " " -f2); \
|
||||
cat $@; \
|
||||
$(MKHASH) md5 $@ ; \
|
||||
echo $(1); \
|
||||
echo -n $$crc; \
|
||||
) > $@.new
|
||||
mv $@.new $@
|
||||
endef
|
||||
|
||||
define Build/edimax-headers
|
||||
$(eval edimax_magic=$(word 1,$(1)))
|
||||
$(eval edimax_model=$(word 2,$(1)))
|
||||
@ -995,6 +1006,26 @@ define Device/devolo_magic-2-wifi
|
||||
endef
|
||||
TARGET_DEVICES += devolo_magic-2-wifi
|
||||
|
||||
define Device/dlink_covr-p2500-a1
|
||||
$(Device/loader-okli-uimage)
|
||||
SOC := qca9563
|
||||
DEVICE_VENDOR := D-Link
|
||||
DEVICE_MODEL := COVR-P2500
|
||||
DEVICE_VARIANT := A1
|
||||
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
|
||||
LOADER_FLASH_OFFS := 0x050000
|
||||
LOADER_KERNEL_MAGIC := 0x68737173
|
||||
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x68737173
|
||||
IMAGE_SIZE := 14528k
|
||||
IMAGES += factory.bin recovery.bin
|
||||
IMAGE/recovery.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
||||
append-rootfs | pad-rootfs | check-size | pad-to 14528k | \
|
||||
append-loader-okli-uimage $(1) | pad-to 15616k
|
||||
IMAGE/factory.bin := $$(IMAGE/recovery.bin) | \
|
||||
dlink-sge-image COVR-P2500 | dlink-sge-signature COVR-P2500
|
||||
endef
|
||||
TARGET_DEVICES += dlink_covr-p2500-a1
|
||||
|
||||
define Device/dlink_dap-13xx
|
||||
SOC := qca9533
|
||||
DEVICE_VENDOR := D-Link
|
||||
|
||||
Loading…
Reference in New Issue
Block a user