ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-02-06 11:09:31 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity

realtek: do not reset SerDes on link change

Browse Source 
Do not reset the RTL930x SerDes on link changes, instead set up
the SDS with internal PHYs for the SFP+ ports only.
This fixes the 8 1GBit ports on the Zyxel XGS1250 which
do not work without this patch.

A complete SerDes reset was performed on all SerDes links. For copper
1Gbit ports, this is commonly a single XGMII link to an RTL8218D. There
is however no support for setting up the XGMII link on RTL9300/RTL9310,
thereby wiping the (RX/TX) setup done by u-boot and breaking the 1GBit
ports. No SerDes reset should be done for these links.

The handling of SGMII/HiSGMII, 1000BX or 10GR links is actually entirely
different. All these modes need to be suitably RX calibrated and the
pre- main and post- amplifiers set up properly for TX.

The 10GBit SFP+ fiber links are recalibrated instead of reset, which
e.g. is necessary when someone pulls a module out and puts another in.
This makes swapping out 10GBit fiber modules possible. 1GBit modules are
not yet supported, nor any modules with an internal phy.

Tested-by: Stijn Segers <foss@volatilesystems.org>
Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
[rewrite commit message based on discussion]
Link: http://lists.infradead.org/pipermail/openwrt-devel/2022-May/038623.html
Signed-off-by: Sander Vanheule <sander@svanheule.net>
(cherry picked from commit d1b824650f1ee694ec2dbdd2f4f9ec64e650cf86)
This commit is contained in:
Birger Koblitz 2022-04-24 22:01:31 +02:00 committed by Sander Vanheule
parent 7b4702afef
commit a374a959b9
2 changed files with 3 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/dsa.c
View File

@ -817,7 +817,8 @@ static void rtl93xx_phylink_mac_config(struct dsa_switch *ds, int port,
__func__, phy_modes(state->interface));
return;
}
rtl9300_sds_rst(sds_num, sds_mode);
if (state->interface == PHY_INTERFACE_MODE_10GBASER)
rtl9300_serdes_setup(sds_num, state->interface);
}
reg = sw_r32(priv->r->mac_force_mode_ctrl(port));

1
target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl83xx.h
View File

@ -121,6 +121,7 @@ irqreturn_t rtl839x_switch_irq(int irq, void *dev_id);
void rtl930x_vlan_profile_dump(int index);
int rtl9300_sds_power(int mac, int val);
void rtl9300_sds_rst(int sds_num, u32 mode);
int rtl9300_serdes_setup(int sds_num, phy_interface_t phy_mode);
void rtl930x_print_matrix(void);
/* RTL931x-specific */