mac80211: update to version 5.4-rc8

This updates mac80211 to backports based on kernel 5.4-rc8.

The deleted patches were applied upstream.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Hauke Mehrtens 2019-11-21 22:20:20 +01:00
parent 103e49f62e
commit a36c464efe
18 changed files with 17 additions and 386 deletions

View File

@ -10,10 +10,10 @@ include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=mac80211
PKG_VERSION:=5.4-rc2-1
PKG_RELEASE:=2
PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v5.4-rc2/
PKG_HASH:=b3baedc135b455f09f266cb77e73276ca21bceeb0f24bac2184cc4b97d09cdbf
PKG_VERSION:=5.4-rc8-1
PKG_RELEASE:=1
PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v5.4-rc8/
PKG_HASH:=707ffc50d0f6fe3398bcc3a7abd44ffa088d9309255a3a71d014620c20d3bbf9
PKG_SOURCE:=backports-$(PKG_VERSION).tar.xz
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/backports-$(PKG_VERSION)

View File

@ -14,7 +14,7 @@ Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -3071,6 +3071,16 @@ int ath10k_core_register(struct ath10k *
@@ -3074,6 +3074,16 @@ int ath10k_core_register(struct ath10k *
queue_work(ar->workqueue, &ar->register_work);

View File

@ -172,7 +172,7 @@ v13:
.patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
@@ -2788,6 +2794,10 @@ int ath10k_core_start(struct ath10k *ar,
@@ -2791,6 +2797,10 @@ int ath10k_core_start(struct ath10k *ar,
goto err_hif_stop;
}
@ -183,7 +183,7 @@ v13:
return 0;
err_hif_stop:
@@ -3044,9 +3054,18 @@ static void ath10k_core_register_work(st
@@ -3047,9 +3057,18 @@ static void ath10k_core_register_work(st
goto err_spectral_destroy;
}
@ -202,7 +202,7 @@ v13:
err_spectral_destroy:
ath10k_spectral_destroy(ar);
err_debug_destroy:
@@ -3092,6 +3111,8 @@ void ath10k_core_unregister(struct ath10
@@ -3095,6 +3114,8 @@ void ath10k_core_unregister(struct ath10
if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags))
return;

View File

@ -1,42 +0,0 @@
From: Miaoqing Pan <miaoqing@codeaurora.org>
Subject: [PATCH] ath10k: fix latency issue for QCA988x
Date: Thu, 29 Aug 2019 10:45:12 +0800
Bad latency is found on QCA988x, the issue was introduced by
commit 4504f0e5b571 ("ath10k: sdio: workaround firmware UART
pin configuration bug"). If uart_pin_workaround is false, this
change will set uart pin even if uart_print is false.
Tested HW: QCA9880
Tested FW: 10.2.4-1.0-00037
Fixes: 4504f0e5b571 ("ath10k: sdio: workaround firmware UART pin configuration bug")
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/core.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -2124,12 +2124,15 @@ static int ath10k_init_uart(struct ath10
return ret;
}
- if (!uart_print && ar->hw_params.uart_pin_workaround) {
- ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin,
- ar->hw_params.uart_pin);
- if (ret) {
- ath10k_warn(ar, "failed to set UART TX pin: %d", ret);
- return ret;
+ if (!uart_print) {
+ if (ar->hw_params.uart_pin_workaround) {
+ ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin,
+ ar->hw_params.uart_pin);
+ if (ret) {
+ ath10k_warn(ar, "failed to set UART TX pin: %d",
+ ret);
+ return ret;
+ }
}
return 0;

View File

@ -1,24 +0,0 @@
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri, 27 Sep 2019 23:12:08 +0200
Subject: [PATCH] backports: pci: Include linux/pci-aspm.h
In upstream commit 7ce2e76a0420 linux/pci-aspm.h was removed and the
content included into pci.h. Add an include to have the functions
defined in linux/pci-aspm.h available when linux/pci.h is included.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
--- a/backport-include/linux/pci.h
+++ b/backport-include/linux/pci.h
@@ -7,6 +7,10 @@
#include <linux/pci-aspm.h>
#endif
+#if LINUX_VERSION_IS_LESS(5,4,0)
+#include <linux/pci-aspm.h>
+#endif
+
#ifndef module_pci_driver
/**
* module_pci_driver() - Helper macro for registering a PCI driver

View File

@ -1,43 +0,0 @@
From: Felix Fietkau <nbd@nbd.name>
Date: Mon, 28 Oct 2019 15:20:40 +0100
Subject: [PATCH] backport: add pci_disable_link_state wrapper with return code
The signature of pci_disable_link_state was changed to indicate if the state
was successfully disabled. Since the old version did not have this, add a
wrapper which checks the pcie register to determine the return code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
--- a/backport-include/linux/pci.h
+++ b/backport-include/linux/pci.h
@@ -240,4 +240,29 @@ static inline struct pci_dev *pcie_find_
(PCI_IRQ_LEGACY | PCI_IRQ_MSI | PCI_IRQ_MSIX)
#endif
+#if defined(CONFIG_PCI) && LINUX_VERSION_IS_LESS(5,3,0)
+
+static inline int
+LINUX_BACKPORT(pci_disable_link_state)(struct pci_dev *pdev, int state)
+{
+ u16 aspmc;
+
+ pci_disable_link_state(pdev, state);
+
+ pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &aspmc);
+ if ((state & PCIE_LINK_STATE_L0S) &&
+ (aspmc & PCI_EXP_LNKCTL_ASPM_L0S))
+ return -EPERM;
+
+ if ((state & PCIE_LINK_STATE_L1) &&
+ (aspmc & PCI_EXP_LNKCTL_ASPM_L1))
+ return -EPERM;
+
+ return 0;
+}
+
+#define pci_disable_link_state LINUX_BACKPORT(pci_disable_link_state)
+
+#endif
+
#endif /* _BACKPORT_LINUX_PCI_H */

View File

@ -1,68 +0,0 @@
From e3c57dd949835419cee8d3b45db38de58bf6ebd5 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Mon, 18 Nov 2019 01:13:37 +0100
Subject: [PATCH] backports: Adapt to changes to skb_get_hash_perturb()
The skb_get_hash_perturb() function now takes a siphash_key_t instead of
an u32. This was changed in commit 55667441c84f ("net/flow_dissector:
switch to siphash"). Use the correct type in the fq header file
depending on the kernel version.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
include/net/fq.h | 8 ++++++++
include/net/fq_impl.h | 8 ++++++++
2 files changed, 16 insertions(+)
--- a/include/net/fq.h
+++ b/include/net/fq.h
@@ -69,7 +69,15 @@ struct fq {
struct list_head backlogs;
spinlock_t lock;
u32 flows_cnt;
+#if LINUX_VERSION_IS_GEQ(5,3,10) || \
+ LINUX_VERSION_IN_RANGE(4,19,83, 4,20,0) || \
+ LINUX_VERSION_IN_RANGE(4,14,153, 4,15,0) || \
+ LINUX_VERSION_IN_RANGE(4,9,200, 4,10,0) || \
+ LINUX_VERSION_IN_RANGE(4,4,200, 4,5,0)
+ siphash_key_t perturbation;
+#else
u32 perturbation;
+#endif
u32 limit;
u32 memory_limit;
u32 memory_usage;
--- a/include/net/fq_impl.h
+++ b/include/net/fq_impl.h
@@ -108,7 +108,15 @@ begin:
static u32 fq_flow_idx(struct fq *fq, struct sk_buff *skb)
{
+#if LINUX_VERSION_IS_GEQ(5,3,10) || \
+ LINUX_VERSION_IN_RANGE(4,19,83, 4,20,0) || \
+ LINUX_VERSION_IN_RANGE(4,14,153, 4,15,0) || \
+ LINUX_VERSION_IN_RANGE(4,9,200, 4,10,0) || \
+ LINUX_VERSION_IN_RANGE(4,4,200, 4,5,0)
+ u32 hash = skb_get_hash_perturb(skb, &fq->perturbation);
+#else
u32 hash = skb_get_hash_perturb(skb, fq->perturbation);
+#endif
return reciprocal_scale(hash, fq->flows_cnt);
}
@@ -308,7 +316,15 @@ static int fq_init(struct fq *fq, int fl
INIT_LIST_HEAD(&fq->backlogs);
spin_lock_init(&fq->lock);
fq->flows_cnt = max_t(u32, flows_cnt, 1);
+#if LINUX_VERSION_IS_GEQ(5,3,10) || \
+ LINUX_VERSION_IN_RANGE(4,19,83, 4,20,0) || \
+ LINUX_VERSION_IN_RANGE(4,14,153, 4,15,0) || \
+ LINUX_VERSION_IN_RANGE(4,9,200, 4,10,0) || \
+ LINUX_VERSION_IN_RANGE(4,4,200, 4,5,0)
+ get_random_bytes(&fq->perturbation, sizeof(fq->perturbation));
+#else
fq->perturbation = prandom_u32();
+#endif
fq->quantum = 300;
fq->limit = 8192;
fq->memory_limit = 16 << 20; /* 16 MBytes */

View File

@ -1,35 +0,0 @@
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
X-Patchwork-Submitter: Stanislaw Gruszka <sgruszka@redhat.com>
X-Patchwork-Id: 11161981
From: Stanislaw Gruszka <sgruszka@redhat.com>
To: linux-wireless@vger.kernel.org
Subject: [PATCH] rt2x00: initialize last_reset
Date: Thu, 26 Sep 2019 10:54:33 +0200
Message-Id: <20190926085433.1300-1-sgruszka@redhat.com>
Sender: linux-wireless-owner@vger.kernel.org
List-ID: <linux-wireless.vger.kernel.org>
X-Mailing-List: linux-wireless@vger.kernel.org
Initialize last_reset variable to INITIAL_JIFFIES, otherwise it is not
possible to test H/W reset for first 5 minutes of system run.
Fixes: e403fa31ed71 ("rt2x00: add restart hw")
Reported-and-tested-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
drivers/net/wireless/ralink/rt2x00/rt2x00debug.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c
@@ -555,7 +555,7 @@ static ssize_t rt2x00debug_write_restart
{
struct rt2x00debug_intf *intf = file->private_data;
struct rt2x00_dev *rt2x00dev = intf->rt2x00dev;
- static unsigned long last_reset;
+ static unsigned long last_reset = INITIAL_JIFFIES;
if (!rt2x00_has_cap_restart_hw(rt2x00dev))
return -EOPNOTSUPP;

View File

@ -22,7 +22,7 @@
+#endif /* _RT2X00_PLATFORM_H */
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -29,6 +29,7 @@
@@ -28,6 +28,7 @@
#include <linux/average.h>
#include <linux/usb.h>
#include <linux/clk.h>

View File

@ -105,7 +105,7 @@
.drv_init_registers = rt2800mmio_init_registers,
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -695,6 +695,7 @@ enum rt2x00_capability_flags {
@@ -694,6 +694,7 @@ enum rt2x00_capability_flags {
REQUIRE_HT_TX_DESC,
REQUIRE_PS_AUTOWAKE,
REQUIRE_DELAYED_RFKILL,
@ -113,7 +113,7 @@
/*
* Capabilities
@@ -971,6 +972,11 @@ struct rt2x00_dev {
@@ -970,6 +971,11 @@ struct rt2x00_dev {
const struct firmware *fw;
/*

View File

@ -37,7 +37,7 @@
num_rates += 4;
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -400,6 +400,7 @@ struct hw_mode_spec {
@@ -399,6 +399,7 @@ struct hw_mode_spec {
unsigned int supported_bands;
#define SUPPORT_BAND_2GHZ 0x00000001
#define SUPPORT_BAND_5GHZ 0x00000002

View File

@ -79,7 +79,7 @@
void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev);
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -563,6 +563,7 @@ struct rt2x00lib_ops {
@@ -562,6 +562,7 @@ struct rt2x00lib_ops {
struct link_qual *qual, const u32 count);
void (*gain_calibration) (struct rt2x00_dev *rt2x00dev);
void (*vco_calibration) (struct rt2x00_dev *rt2x00dev);

View File

@ -182,7 +182,7 @@
void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev);
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -564,6 +564,8 @@ struct rt2x00lib_ops {
@@ -563,6 +563,8 @@ struct rt2x00lib_ops {
void (*gain_calibration) (struct rt2x00_dev *rt2x00dev);
void (*vco_calibration) (struct rt2x00_dev *rt2x00dev);
void (*rf_self_txdc_cal) (struct rt2x00_dev *rt2x00dev);

View File

@ -92,7 +92,7 @@
void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev);
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -566,6 +566,7 @@ struct rt2x00lib_ops {
@@ -565,6 +565,7 @@ struct rt2x00lib_ops {
void (*rf_self_txdc_cal) (struct rt2x00_dev *rt2x00dev);
int (*calcrcalibrationcode) (struct rt2x00_dev *rt2x00dev, int d1, int d2);
void (*r_calibration) (struct rt2x00_dev *rt2x00dev);

View File

@ -407,7 +407,7 @@
void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev);
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -567,6 +567,7 @@ struct rt2x00lib_ops {
@@ -566,6 +566,7 @@ struct rt2x00lib_ops {
int (*calcrcalibrationcode) (struct rt2x00_dev *rt2x00dev, int d1, int d2);
void (*r_calibration) (struct rt2x00_dev *rt2x00dev);
void (*rxdcoc_calibration) (struct rt2x00_dev *rt2x00dev);

View File

@ -992,7 +992,7 @@
void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev);
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -568,6 +568,7 @@ struct rt2x00lib_ops {
@@ -567,6 +567,7 @@ struct rt2x00lib_ops {
void (*r_calibration) (struct rt2x00_dev *rt2x00dev);
void (*rxdcoc_calibration) (struct rt2x00_dev *rt2x00dev);
void (*rxiq_calibration) (struct rt2x00_dev *rt2x00dev);

View File

@ -1,118 +0,0 @@
From dc0c18ed229cdcca283dd78fefa38273ec37a42c Mon Sep 17 00:00:00 2001
From: Aaron Komisar <aaron.komisar@tandemg.com>
Date: Wed, 2 Oct 2019 13:59:07 +0000
Subject: mac80211: fix scan when operating on DFS channels in ETSI domains
In non-ETSI regulatory domains scan is blocked when operating channel
is a DFS channel. For ETSI, however, once DFS channel is marked as
available after the CAC, this channel will remain available (for some
time) even after leaving this channel.
Therefore a scan can be done without any impact on the availability
of the DFS channel as no new CAC is required after the scan.
Enable scan in mac80211 in these cases.
Signed-off-by: Aaron Komisar <aaron.komisar@tandemg.com>
Link: https://lore.kernel.org/r/1570024728-17284-1-git-send-email-aaron.komisar@tandemg.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
include/net/cfg80211.h | 8 ++++++++
net/mac80211/scan.c | 30 ++++++++++++++++++++++++++++--
net/wireless/reg.c | 1 +
net/wireless/reg.h | 8 --------
4 files changed, 37 insertions(+), 10 deletions(-)
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -5554,6 +5554,14 @@ const struct ieee80211_reg_rule *freq_re
const char *reg_initiator_name(enum nl80211_reg_initiator initiator);
/**
+ * regulatory_pre_cac_allowed - check if pre-CAC allowed in the current regdom
+ * @wiphy: wiphy for which pre-CAC capability is checked.
+ *
+ * Pre-CAC is allowed only in some regdomains (notable ETSI).
+ */
+bool regulatory_pre_cac_allowed(struct wiphy *wiphy);
+
+/**
* DOC: Internal regulatory db functions
*
*/
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -520,10 +520,33 @@ static int ieee80211_start_sw_scan(struc
return 0;
}
+static bool __ieee80211_can_leave_ch(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_sub_if_data *sdata_iter;
+
+ if (!ieee80211_is_radar_required(local))
+ return true;
+
+ if (!regulatory_pre_cac_allowed(local->hw.wiphy))
+ return false;
+
+ mutex_lock(&local->iflist_mtx);
+ list_for_each_entry(sdata_iter, &local->interfaces, list) {
+ if (sdata_iter->wdev.cac_started) {
+ mutex_unlock(&local->iflist_mtx);
+ return false;
+ }
+ }
+ mutex_unlock(&local->iflist_mtx);
+
+ return true;
+}
+
static bool ieee80211_can_scan(struct ieee80211_local *local,
struct ieee80211_sub_if_data *sdata)
{
- if (ieee80211_is_radar_required(local))
+ if (!__ieee80211_can_leave_ch(sdata))
return false;
if (!list_empty(&local->roc_list))
@@ -630,7 +653,10 @@ static int __ieee80211_start_scan(struct
lockdep_assert_held(&local->mtx);
- if (local->scan_req || ieee80211_is_radar_required(local))
+ if (local->scan_req)
+ return -EBUSY;
+
+ if (!__ieee80211_can_leave_ch(sdata))
return -EBUSY;
if (!ieee80211_can_scan(local, sdata)) {
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -3883,6 +3883,7 @@ bool regulatory_pre_cac_allowed(struct w
return pre_cac_allowed;
}
+EXPORT_SYMBOL(regulatory_pre_cac_allowed);
void regulatory_propagate_dfs_state(struct wiphy *wiphy,
struct cfg80211_chan_def *chandef,
--- a/net/wireless/reg.h
+++ b/net/wireless/reg.h
@@ -156,14 +156,6 @@ bool regulatory_indoor_allowed(void);
#define REG_PRE_CAC_EXPIRY_GRACE_MS 2000
/**
- * regulatory_pre_cac_allowed - if pre-CAC allowed in the current dfs domain
- * @wiphy: wiphy for which pre-CAC capability is checked.
-
- * Pre-CAC is allowed only in ETSI domain.
- */
-bool regulatory_pre_cac_allowed(struct wiphy *wiphy);
-
-/**
* regulatory_propagate_dfs_state - Propagate DFS channel state to other wiphys
* @wiphy - wiphy on which radar is detected and the event will be propagated
* to other available wiphys having the same DFS domain

View File

@ -1,39 +0,0 @@
From 95697f9907bfe3eab0ef20265a766b22e27dde64 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Fri, 4 Oct 2019 15:37:05 +0300
Subject: [PATCH] mac80211: accept deauth frames in IBSS mode
We can process deauth frames and all, but we drop them very
early in the RX path today - this could never have worked.
Fixes: 2cc59e784b54 ("mac80211: reply to AUTH with DEAUTH if sta allocation fails in IBSS")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20191004123706.15768-2-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
net/mac80211/rx.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -3467,9 +3467,18 @@ ieee80211_rx_h_mgmt(struct ieee80211_rx_
case cpu_to_le16(IEEE80211_STYPE_PROBE_RESP):
/* process for all: mesh, mlme, ibss */
break;
+ case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
+ if (is_multicast_ether_addr(mgmt->da) &&
+ !is_broadcast_ether_addr(mgmt->da))
+ return RX_DROP_MONITOR;
+
+ /* process only for station/IBSS */
+ if (sdata->vif.type != NL80211_IFTYPE_STATION &&
+ sdata->vif.type != NL80211_IFTYPE_ADHOC)
+ return RX_DROP_MONITOR;
+ break;
case cpu_to_le16(IEEE80211_STYPE_ASSOC_RESP):
case cpu_to_le16(IEEE80211_STYPE_REASSOC_RESP):
- case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
case cpu_to_le16(IEEE80211_STYPE_DISASSOC):
if (is_multicast_ether_addr(mgmt->da) &&
!is_broadcast_ether_addr(mgmt->da))