mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-19 03:06:35 +00:00
layerscape: add new devices in README and clean up
Support new devices LS1046AFRWY and LX2160ARDB in README. Clean up README, and add missing LS1021ATWR deploy guide. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> [adjust set of devices added, update commit message/title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Yangbo Lu
Adrian Schmutzler
parent
80dcd14abe
commit
a31842e7fd
@ -1,15 +1,27 @@
|
||||
|
||||
Layerscape Quick Start
|
||||
|
||||
1. Layerscape target support
|
||||
This is a quick start guide for Layerscape specific usage, like introducing
|
||||
how to configure, build, and deploy OpenWrt to Layerscape boards, so that
|
||||
users can bring up the board without difficulty.
|
||||
|
||||
|
||||
1. Target support
|
||||
----------------------------
|
||||
* ARMv8 64-bit
|
||||
LS1012ARDB LS1012AFRWY LS1043ARDB LS1046ARDB LS1088ARDB LS2088ARDB
|
||||
(SD card boot support on LS1043ARDB/LS1046ARDB/LS1088ARDB)
|
||||
LS1012ARDB (QSPI NOR boot)
|
||||
LS1012AFRDM (QSPI NOR boot)
|
||||
LS1012AFRWY (QSPI NOR boot)
|
||||
LS1043ARDB (NOR boot | SD card boot)
|
||||
LS1046ARDB (QSPI NOR boot | SD card boot)
|
||||
LS1046AFRWY (QSPI NOR boot | SD card boot)
|
||||
LS1088ARDB (QSPI NOR boot | SD card boot)
|
||||
LS2088ARDB (NOR boot)
|
||||
LX2160ARDB Rev2.0 (FlexSPI NOR boot | SD card boot)
|
||||
|
||||
* ARMv7
|
||||
LS1021ATWR LS1021AIOT
|
||||
(SD card boot support on LS1021ATWR/LS1021AIOT)
|
||||
LS1021ATWR (NOR boot | SD card boot)
|
||||
LS1021AIOT (SD card boot)
|
||||
|
||||
|
||||
2. Build
|
||||
@ -24,7 +36,7 @@ $ ./scripts/feeds install -a
|
||||
Subtarget: (Select subtarget)
|
||||
Target Profile: (Select device, or "Multiple devices")
|
||||
Target Devices: (Select devices. Available when Target Profile is "Multiple devices")
|
||||
Target Images: (Disable "GZip images" if don't want to unzip manually to use the images.)
|
||||
Target Images: (Disable "GZip images" if you don't want to unzip manually to use the images.)
|
||||
|
||||
Note: The first time make menuconfig would create a .config file which
|
||||
would include all dependencies for selected target. After that, make
|
||||
@ -37,16 +49,16 @@ $ ./scripts/feeds install -a
|
||||
* make (or make -j<n>)
|
||||
|
||||
* Final firmware/image
|
||||
Path: bin/targets/layerscape/<subtarget>/
|
||||
Path: bin/targets/layerscape/<subtarget>/
|
||||
Firmware for flash: openwrt-layerscape-<subtarget>-<device>-<rootfs>-firmware.bin
|
||||
Image for SD card: openwrt-layerscape-<subtarget>-<device>-<rootfs>-sdcard.img.gz
|
||||
Sysupgrade images: openwrt-layerscape-<subtarget>-<device>-<rootfs>-sysupgrade.bin
|
||||
Image for SD card: openwrt-layerscape-<subtarget>-<device>-<rootfs>-sdcard.img.gz
|
||||
Sysupgrade images: openwrt-layerscape-<subtarget>-<device>-<rootfs>-sysupgrade.bin
|
||||
|
||||
|
||||
3. Program NOR/QSPI flash or SD card
|
||||
------------------------------------
|
||||
The firmware.bin or sdcard.img (after extract from gz) is an all-in-one image including all
|
||||
things for OpenWrt staring up. (except LS1012AFRWY. Refer to 3.3.)
|
||||
3. Deploy
|
||||
---------
|
||||
The firmware.bin or sdcard.img is an all-in-one image including all things
|
||||
for OpenWrt staring up except LS1012AFRWY (Refer to 3.3).
|
||||
If you want to install all things into flash, please use firmware.bin.
|
||||
If you want to install all things into SD card, please use sdcard.img.
|
||||
|
||||
@ -72,17 +84,7 @@ from SD card. (sdcard.img images are gz-iped to save space. Please extract them
|
||||
|
||||
3.2 Program firmware.bin to flash
|
||||
---------------------------------
|
||||
* LS1012FRDM (QSPI flash)
|
||||
Board have only one nor flash bank. Those commands will replace stock
|
||||
bootloader and firmware. Please refer point 4 for MAC recovery.
|
||||
|
||||
=> tftp a0000000 <firmware_name>-firmware.bin
|
||||
=> sf probe 0:0
|
||||
=> sf erase 0 +$filesize
|
||||
=> sf write a0000000 0 $filesize
|
||||
=> reset
|
||||
|
||||
* LS1012ARDB (QSPI flash)
|
||||
* LS1012ARDB
|
||||
Start up from bank1, and program firmware to bank2 with below commands.
|
||||
Switch to bank2 to start up OpenWrt.
|
||||
|
||||
@ -93,7 +95,7 @@ from SD card. (sdcard.img images are gz-iped to save space. Please extract them
|
||||
=> sf write a0000000 0 $filesize
|
||||
=> reset
|
||||
|
||||
* LS1043ARDB (NOR flash)
|
||||
* LS1043ARDB
|
||||
Start up from bank0, and program firmware to bank4 with below commands.
|
||||
Switch to bank4 to start up OpenWrt.
|
||||
|
||||
@ -103,7 +105,7 @@ from SD card. (sdcard.img images are gz-iped to save space. Please extract them
|
||||
=> cp.b a0000000 64000000 $filesize
|
||||
=> cpld reset altbank
|
||||
|
||||
* LS1046ARDB (QSPI flash)
|
||||
* LS1046ARDB
|
||||
Start up from bank1, and program firmware to bank2 with below commands.
|
||||
Switch to bank2 to start up OpenWrt.
|
||||
|
||||
@ -113,7 +115,27 @@ from SD card. (sdcard.img images are gz-iped to save space. Please extract them
|
||||
=> sf write a0000000 0 $filesize
|
||||
=> cpld reset altbank
|
||||
|
||||
* LS1088ARDB (QSPI flash)
|
||||
* LS2088ARDB
|
||||
Start up from bank0, and program firmware to bank4 with below commands.
|
||||
Switch to bank4 to start up OpenWrt.
|
||||
|
||||
=> tftp a0000000 <firmware_name>-firmware.bin
|
||||
=> protect off all
|
||||
=> erase 584000000 +$filesize
|
||||
=> cp.b a0000000 584000000 $filesize
|
||||
=> qix altbank
|
||||
|
||||
* LS1012FRDM/LS1046AFRWY
|
||||
Board has only one bank. Those commands will replace stock bootloader
|
||||
and firmware.
|
||||
|
||||
=> tftp a0000000 <firmware_name>-firmware.bin
|
||||
=> sf probe 0:0
|
||||
=> sf erase 0 +$filesize
|
||||
=> sf write a0000000 0 $filesize
|
||||
=> reset
|
||||
|
||||
* LS1088ARDB/LX2160ARDB Rev2.0
|
||||
Start up from bank0, and program firmware to bank1 with below commands.
|
||||
Switch to bank1 to start up OpenWrt.
|
||||
|
||||
@ -127,15 +149,15 @@ from SD card. (sdcard.img images are gz-iped to save space. Please extract them
|
||||
bank1 instead of 'qix altbank'.
|
||||
=> i2c mw 66 50 20;i2c mw 66 10 20;i2c mw 66 10 21
|
||||
|
||||
* LS2088ARDB (NOR flash)
|
||||
* LS1021ATWR
|
||||
Start up from bank0, and program firmware to bank4 with below commands.
|
||||
Switch to bank4 to start up OpenWrt.
|
||||
|
||||
=> tftp a0000000 <firmware_name>-firmware.bin
|
||||
=> protect off all
|
||||
=> erase 584000000 +$filesize
|
||||
=> cp.b a0000000 584000000 $filesize
|
||||
=> qix altbank
|
||||
=> erase 64000000 +$filesize
|
||||
=> cp.b a0000000 64000000 $filesize
|
||||
=> boot_bank 1
|
||||
|
||||
3.3 Program LS1012AFRWY
|
||||
-----------------------
|
||||
@ -159,7 +181,7 @@ from SD card. (sdcard.img images are gz-iped to save space. Please extract them
|
||||
|
||||
4. Known issues and limitation
|
||||
------------------------------
|
||||
* u-boot may fail to read MAC addresses from EEPROM on some boards and there
|
||||
* U-boot may fail to read MAC addresses from EEPROM on some boards and there
|
||||
won't be MAC addresses set in environment. This may cause kernel fails to
|
||||
probe these network interfaces. The workaround is to set MAC addresses
|
||||
manually, for example,
|
||||
@ -168,8 +190,23 @@ from SD card. (sdcard.img images are gz-iped to save space. Please extract them
|
||||
=> setenv eth1addr 00:04:9F:04:65:4c
|
||||
=> saveenv
|
||||
|
||||
* In case users want to refer Layerscape SDK doc for network configuration,
|
||||
like TSN (Time-Sensitive Networking) on LS1028A, the OpenWrt LAN/WAN router
|
||||
setting should be removed before that.
|
||||
|
||||
# ubus call network.interface.lan remove
|
||||
# ubus call network.interface.wan remove
|
||||
# ubus call network.interface.wan6 remove
|
||||
|
||||
And firewall may be needed to stop.
|
||||
|
||||
# /etc/init.d/firewall stop
|
||||
|
||||
|
||||
5. Other references
|
||||
-------------------
|
||||
- NXP LSDK site: https://lsdk.github.io/
|
||||
- NXP LSDK source: https://lsdk.github.io/
|
||||
|
||||
- NXP LSDK site: https://www.nxp.com/design/software/embedded-software/linux-software-and-development-tools/layerscape-software-development-kit:LAYERSCAPE-SDK
|
||||
|
||||
- OpenWrt documentation: https://openwrt.org/docs/start
|
||||
|
||||
Loading…
Reference in New Issue
Block a user