mirror of
https://github.com/openwrt/openwrt.git
synced 2025-02-21 17:47:00 +00:00
qualcommax: ipq60xx: add TP-Link EAP610-Outdoor support
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
Build all core packages / Build all core packages for selected target (push) Waiting to run
Build and Push prebuilt tools container / Build and Push all prebuilt containers (push) Waiting to run
Build host tools / Build host tools for linux and macos based systems (push) Waiting to run
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
Build all core packages / Build all core packages for selected target (push) Waiting to run
Build and Push prebuilt tools container / Build and Push all prebuilt containers (push) Waiting to run
Build host tools / Build host tools for linux and macos based systems (push) Waiting to run
TP-Link EAP610-Outdoor is a 802.11ax AP claiming AX1800 support. It is wall or pole mountable, and rated for outdoor use. It can only be powered via PoE. Specifications: --------------- * CPU: Qualcomm IPQ6018 Quad core Cortex-A53 * RAM: 512 MB * Storage: ESMT PSR1GA30DT 128MB NAND * Ethernet: * Gigabit RJ45 port with PoE input * WLAN: * 2.4GHz/5GHz * LEDs: * Multi-color System LED (Green/Amber) * Buttons: * 1x Reset * UART: 4-pin unpopulated header * 1.8 V level, Pinout 1 - TX, 2 - RX, 3 - GND, 4 - 1.8V Installation: ============= Web UI method ------------- Set up the device using the vendor's web UI. After that go to Management->SSH and enable the "SSH Login" checkbox. Select "Save". The connect to the machine via SSH: ssh -o hostkeyalgorithms=ssh-rsa <ip_of_device> Disable signature verification: cliclientd stopcs Rename the "-web-ui-factory" image to something less than 63 characters, maintaining the ".bin" suffix. * Go to System -> Firmware Update. * Under "New Firmware File", click "Browse" and select the image * Select "Update" and confirm by clicking "OK". If the update fails, the web UI should show an error message. Otherwise, the device should reboot into OpenWRT. TFTP method ----------- To flash via tftp, first place the initramfs image on the TFTP server. setenv serverip <ip of tftp server> setenv ipaddr <ip in same subnet as tftp server> tftpboot tplink_eap610-outdoor-initramfs-uImage.itb bootm This should boot OpenWRT. Once booted, flash the sysupgrade.bin image using either luci or the commandline. The tplink2022 image format ============================ The vendor images of this device are packaged in a format that does not match any previous tplink formats. In order for flashing to work from the vendor's web UI, firmware updates need to be packaged in this format. The `tplink-mkimage-2022.py` is provided for this purpose. This script can also analyze vendor images, and extract the required "support" string. This string is checked by the vendor firmware, and images with a missing or incorrect string are rejected. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Link: https://github.com/openwrt/openwrt/pull/14922 Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
parent
3f87c5ac42
commit
a00ff9f6d1
@ -626,6 +626,14 @@ define Build/sysupgrade-tar
|
|||||||
$@
|
$@
|
||||||
endef
|
endef
|
||||||
|
|
||||||
|
define Build/tplink-image-2022
|
||||||
|
$(TOPDIR)/scripts/tplink-mkimage-2022.py \
|
||||||
|
--create $@.new \
|
||||||
|
--rootfs $@ \
|
||||||
|
--support "$(TPLINK_SUPPORT_STRING)"
|
||||||
|
@mv $@.new $@
|
||||||
|
endef
|
||||||
|
|
||||||
define Build/tplink-safeloader
|
define Build/tplink-safeloader
|
||||||
-$(STAGING_DIR_HOST)/bin/tplink-safeloader \
|
-$(STAGING_DIR_HOST)/bin/tplink-safeloader \
|
||||||
-B $(TPLINK_BOARD_ID) \
|
-B $(TPLINK_BOARD_ID) \
|
||||||
|
@ -25,6 +25,10 @@ netgear,wax214)
|
|||||||
[ -n "$idx" ] && \
|
[ -n "$idx" ] && \
|
||||||
ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x40000" "0x20000"
|
ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x40000" "0x20000"
|
||||||
;;
|
;;
|
||||||
|
tplink,eap610-outdoor)
|
||||||
|
idx="$(find_mtd_index 0:appsblenv)"
|
||||||
|
[ -n "$idx" ] && \
|
||||||
|
ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x40000" "0x20000"
|
||||||
yuncore,fap650)
|
yuncore,fap650)
|
||||||
idx="$(find_mtd_index 0:appsblenv)"
|
idx="$(find_mtd_index 0:appsblenv)"
|
||||||
[ -n "$idx" ] && \
|
[ -n "$idx" ] && \
|
||||||
|
@ -55,6 +55,7 @@ ALLWIFIBOARDS:= \
|
|||||||
redmi_ax6 \
|
redmi_ax6 \
|
||||||
skspruce_wia3300-20 \
|
skspruce_wia3300-20 \
|
||||||
spectrum_sax1v1k \
|
spectrum_sax1v1k \
|
||||||
|
tplink_eap610-outdoor \
|
||||||
tplink_eap620hd-v1 \
|
tplink_eap620hd-v1 \
|
||||||
tplink_eap660hd-v1 \
|
tplink_eap660hd-v1 \
|
||||||
wallys_dr40x9 \
|
wallys_dr40x9 \
|
||||||
@ -185,6 +186,7 @@ $(eval $(call generate-ipq-wifi-package,prpl_haze,prpl Haze))
|
|||||||
$(eval $(call generate-ipq-wifi-package,redmi_ax6,Redmi AX6))
|
$(eval $(call generate-ipq-wifi-package,redmi_ax6,Redmi AX6))
|
||||||
$(eval $(call generate-ipq-wifi-package,skspruce_wia3300-20,SKSpruce WIA3300-20))
|
$(eval $(call generate-ipq-wifi-package,skspruce_wia3300-20,SKSpruce WIA3300-20))
|
||||||
$(eval $(call generate-ipq-wifi-package,spectrum_sax1v1k,Spectrum SAX1V1K))
|
$(eval $(call generate-ipq-wifi-package,spectrum_sax1v1k,Spectrum SAX1V1K))
|
||||||
|
$(eval $(call generate-ipq-wifi-package,tplink_eap610-outdoor,TPLink EAP610-Outdoor))
|
||||||
$(eval $(call generate-ipq-wifi-package,tplink_eap620hd-v1,TP-Link EAP620 HD v1))
|
$(eval $(call generate-ipq-wifi-package,tplink_eap620hd-v1,TP-Link EAP620 HD v1))
|
||||||
$(eval $(call generate-ipq-wifi-package,tplink_eap660hd-v1,TP-Link EAP660 HD v1))
|
$(eval $(call generate-ipq-wifi-package,tplink_eap660hd-v1,TP-Link EAP660 HD v1))
|
||||||
$(eval $(call generate-ipq-wifi-package,wallys_dr40x9,Wallys DR40X9))
|
$(eval $(call generate-ipq-wifi-package,wallys_dr40x9,Wallys DR40X9))
|
||||||
|
198
scripts/tplink-mkimage-2022.py
Executable file
198
scripts/tplink-mkimage-2022.py
Executable file
@ -0,0 +1,198 @@
|
|||||||
|
#!/usr/bin/env python3
|
||||||
|
|
||||||
|
'''A program for manipulating tplink2022 images.
|
||||||
|
|
||||||
|
A tplink2022 is an image format encountered on TP-Link devices around the year
|
||||||
|
2022. This was seen at least on the EAP610-Outdoor. The format is a container
|
||||||
|
for a rootfs, and has optional fields for the "software" version. It also
|
||||||
|
requires a "support" string that describes the list of compatible devices.
|
||||||
|
|
||||||
|
This module is intended for creating such images with an OpenWRT UBI image, but
|
||||||
|
also supports analysis and extraction of vendor images. Altough tplink2022
|
||||||
|
images can be signed, this program does not support signing image.
|
||||||
|
|
||||||
|
To get an explanation of the commandline arguments, run this program with the
|
||||||
|
"--help" argument.
|
||||||
|
'''
|
||||||
|
|
||||||
|
import argparse
|
||||||
|
import hashlib
|
||||||
|
import os
|
||||||
|
import pprint
|
||||||
|
import struct
|
||||||
|
|
||||||
|
def decode_header(datafile):
|
||||||
|
'''Read the tplink2022 image header anbd decode it into a dictionary'''
|
||||||
|
header = {}
|
||||||
|
fmt = '>2I'
|
||||||
|
|
||||||
|
datafile.seek(0x1014)
|
||||||
|
raw_header = datafile.read(8)
|
||||||
|
fields = struct.unpack(fmt, raw_header)
|
||||||
|
|
||||||
|
header['rootfs_size'] = fields[0]
|
||||||
|
header['num_items'] = fields[1]
|
||||||
|
header['items'] = []
|
||||||
|
|
||||||
|
rootfs = {}
|
||||||
|
rootfs['name'] = 'rootfs.ubi'
|
||||||
|
rootfs['offset'] = 0
|
||||||
|
rootfs['size'] = header['rootfs_size']
|
||||||
|
header['items'].append(rootfs)
|
||||||
|
|
||||||
|
for _ in range(header['num_items']):
|
||||||
|
entry = datafile.read(0x2c)
|
||||||
|
fmt = '>I32s2I'
|
||||||
|
fields = struct.unpack(fmt, entry)
|
||||||
|
|
||||||
|
section = {}
|
||||||
|
section['name'] = fields[1].decode("utf-8").rstrip('\0')
|
||||||
|
section['type'] = fields[0]
|
||||||
|
section['offset'] = fields[2]
|
||||||
|
section['size'] = fields[3]
|
||||||
|
header['items'].append(section)
|
||||||
|
return header
|
||||||
|
|
||||||
|
def extract(datafile):
|
||||||
|
'''Extract the sections of the tplink2022 image to separate files'''
|
||||||
|
header = decode_header(datafile)
|
||||||
|
|
||||||
|
pretty = pprint.PrettyPrinter(indent=4, sort_dicts=False)
|
||||||
|
pretty.pprint(header)
|
||||||
|
|
||||||
|
for section in header['items']:
|
||||||
|
datafile.seek(0x1814 + section['offset'])
|
||||||
|
section_contents = datafile.read(section['size'])
|
||||||
|
|
||||||
|
with open(f"{section['name']}.bin", 'wb') as section_file:
|
||||||
|
section_file.write(section_contents)
|
||||||
|
|
||||||
|
with open('leftover.bin', 'wb') as extras_file:
|
||||||
|
extras_file.write(datafile.read())
|
||||||
|
|
||||||
|
def get_section_contents(section):
|
||||||
|
'''I don't remember what this does. It's been a year since I wrote this'''
|
||||||
|
if section.get('data'):
|
||||||
|
data = section['data']
|
||||||
|
elif section.get('file'):
|
||||||
|
with open(section['file'], 'rb') as section_file:
|
||||||
|
data = section_file.read()
|
||||||
|
else:
|
||||||
|
data = bytes()
|
||||||
|
|
||||||
|
if section['size'] != len(data):
|
||||||
|
raise ValueError("Wrong section size", len(data))
|
||||||
|
|
||||||
|
return data
|
||||||
|
|
||||||
|
def write_image(output_image, header):
|
||||||
|
'''Write a tplink2022 image with the contents in the "header" dictionary'''
|
||||||
|
with open(output_image, 'w+b') as out_file:
|
||||||
|
# header MD5
|
||||||
|
salt = [ 0x7a, 0x2b, 0x15, 0xed,
|
||||||
|
0x9b, 0x98, 0x59, 0x6d,
|
||||||
|
0xe5, 0x04, 0xab, 0x44,
|
||||||
|
0xac, 0x2a, 0x9f, 0x4e
|
||||||
|
]
|
||||||
|
|
||||||
|
out_file.seek(4)
|
||||||
|
out_file.write(bytes(salt))
|
||||||
|
|
||||||
|
# unknown section
|
||||||
|
out_file.write(bytes([0xff] * 0x1000))
|
||||||
|
|
||||||
|
# Table of contents
|
||||||
|
raw_header = struct.pack('>2I', header['rootfs_size'],
|
||||||
|
header['num_items'])
|
||||||
|
out_file.write(raw_header)
|
||||||
|
|
||||||
|
for section in header['items']:
|
||||||
|
if section['name'] == 'rootfs.ubi':
|
||||||
|
continue
|
||||||
|
|
||||||
|
hdr = struct.pack('>I32s2I',
|
||||||
|
section.get('type', 0),
|
||||||
|
section['name'].encode('utf-8'),
|
||||||
|
section['offset'],
|
||||||
|
section['size']
|
||||||
|
)
|
||||||
|
|
||||||
|
out_file.write(hdr)
|
||||||
|
|
||||||
|
for section in header['items']:
|
||||||
|
out_file.seek(0x1814 + section['offset'])
|
||||||
|
out_file.write(get_section_contents(section))
|
||||||
|
|
||||||
|
size = out_file.tell()
|
||||||
|
|
||||||
|
out_file.seek(4)
|
||||||
|
md5_sum = hashlib.md5(out_file.read())
|
||||||
|
|
||||||
|
out_file.seek(0)
|
||||||
|
out_file.write(struct.pack('>I16s', size, md5_sum.digest()))
|
||||||
|
|
||||||
|
def encode_soft_verson():
|
||||||
|
'''Not sure of the meaning of version. Also doesn't appear to be needed.'''
|
||||||
|
return struct.pack('>4B1I2I', 0xff, 1, 0 ,0, 0x2020202, 30000, 1)
|
||||||
|
|
||||||
|
def create_image(output_image, root, support):
|
||||||
|
'''Create an image with a ubi "root" and a "support" string.'''
|
||||||
|
header = {}
|
||||||
|
|
||||||
|
header['rootfs_size'] = os.path.getsize(root)
|
||||||
|
header['items'] = []
|
||||||
|
|
||||||
|
rootfs = {}
|
||||||
|
rootfs['name'] = 'rootfs.ubi'
|
||||||
|
rootfs['file'] = root
|
||||||
|
rootfs['offset'] = 0
|
||||||
|
rootfs['size'] = header['rootfs_size']
|
||||||
|
header['items'].append(rootfs)
|
||||||
|
|
||||||
|
support_list = {}
|
||||||
|
support_list['name'] = 'support-list'
|
||||||
|
support_list['data'] = support.replace(" ", "\r\n").encode('utf-8')
|
||||||
|
support_list['offset'] = header['rootfs_size']
|
||||||
|
support_list['size'] = len(support_list['data'])
|
||||||
|
header['items'].append(support_list)
|
||||||
|
|
||||||
|
sw_version = {}
|
||||||
|
sw_version['name'] = 'soft-version'
|
||||||
|
sw_version['type'] = 1
|
||||||
|
sw_version['data'] = encode_soft_verson()
|
||||||
|
sw_version['offset'] = support_list['offset'] + support_list['size']
|
||||||
|
sw_version['size'] = len(sw_version['data'])
|
||||||
|
header['items'].append(sw_version)
|
||||||
|
|
||||||
|
header['num_items'] = len(header['items']) - 1
|
||||||
|
write_image(output_image, header)
|
||||||
|
|
||||||
|
def main(args):
|
||||||
|
'''We support image analysis,extraction, and creation'''
|
||||||
|
if args.extract:
|
||||||
|
with open(args.image, 'rb') as image:
|
||||||
|
extract(image)
|
||||||
|
elif args.create:
|
||||||
|
if not args.rootfs or not args.support:
|
||||||
|
raise ValueError('To create an image, specify rootfs and support list')
|
||||||
|
create_image(args.image, args.rootfs, args.support)
|
||||||
|
else:
|
||||||
|
with open(args.image, 'rb') as image:
|
||||||
|
header = decode_header(image)
|
||||||
|
|
||||||
|
pretty = pprint.PrettyPrinter(indent=4, sort_dicts=False)
|
||||||
|
pretty.pprint(header)
|
||||||
|
|
||||||
|
if __name__ == "__main__":
|
||||||
|
parser = argparse.ArgumentParser(description='EAP extractor')
|
||||||
|
parser.add_argument('--info', action='store_true')
|
||||||
|
parser.add_argument('--extract', action='store_true')
|
||||||
|
parser.add_argument('--create', action='store_true')
|
||||||
|
parser.add_argument('image', type=str,
|
||||||
|
help='Name of image to create or decode')
|
||||||
|
parser.add_argument('--rootfs', type=str,
|
||||||
|
help='When creating an EAP image, UBI image with rootfs and kernel')
|
||||||
|
parser.add_argument('--support', type=str,
|
||||||
|
help='String for the "support-list" section')
|
||||||
|
|
||||||
|
main(parser.parse_args())
|
@ -0,0 +1,151 @@
|
|||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||||
|
|
||||||
|
/dts-v1/;
|
||||||
|
|
||||||
|
#include "ipq6018.dtsi"
|
||||||
|
#include "ipq6018-cp-cpu.dtsi"
|
||||||
|
#include "ipq6018-ess.dtsi"
|
||||||
|
|
||||||
|
#include <dt-bindings/gpio/gpio.h>
|
||||||
|
#include <dt-bindings/input/input.h>
|
||||||
|
#include <dt-bindings/leds/common.h>
|
||||||
|
|
||||||
|
/ {
|
||||||
|
model = "TP-Link EAP610-Outdoor";
|
||||||
|
compatible = "tplink,eap610-outdoor", "qcom,ipq6018";
|
||||||
|
|
||||||
|
aliases {
|
||||||
|
serial0 = &blsp1_uart3;
|
||||||
|
led-boot = &led_sys_green;
|
||||||
|
led-failsafe = &led_sys_amber;
|
||||||
|
led-running = &led_sys_green;
|
||||||
|
led-upgrade = &led_sys_amber;
|
||||||
|
};
|
||||||
|
|
||||||
|
chosen {
|
||||||
|
stdout-path = "serial0:115200n8";
|
||||||
|
bootargs-append = " ubi.block=0,rootfs root=/dev/ubiblock0_1";
|
||||||
|
};
|
||||||
|
|
||||||
|
keys {
|
||||||
|
compatible = "gpio-keys";
|
||||||
|
|
||||||
|
reset {
|
||||||
|
label = "reset";
|
||||||
|
gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
|
||||||
|
linux,code = <KEY_RESTART>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
leds {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
|
||||||
|
led_sys_amber: led-0 {
|
||||||
|
function = "system";
|
||||||
|
color = <LED_COLOR_ID_AMBER>;
|
||||||
|
gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
|
||||||
|
};
|
||||||
|
|
||||||
|
led_sys_green: led-1 {
|
||||||
|
function = "system";
|
||||||
|
color = <LED_COLOR_ID_GREEN>;
|
||||||
|
gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
gpio-restart {
|
||||||
|
compatible = "gpio-restart";
|
||||||
|
gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
|
||||||
|
open-source;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&blsp1_uart3 {
|
||||||
|
pinctrl-0 = <&serial_3_pins>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&tlmm {
|
||||||
|
mdio_pins: mdio-pins {
|
||||||
|
mdc {
|
||||||
|
pins = "gpio64";
|
||||||
|
function = "mdc";
|
||||||
|
drive-strength = <8>;
|
||||||
|
bias-pull-up;
|
||||||
|
};
|
||||||
|
|
||||||
|
mdio {
|
||||||
|
pins = "gpio65";
|
||||||
|
function = "mdio";
|
||||||
|
drive-strength = <8>;
|
||||||
|
bias-pull-up;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
led_enable {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <36 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "enable-leds";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&dp5 {
|
||||||
|
phy-handle = <&rtl8211f_4>;
|
||||||
|
phy-mode = "sgmii";
|
||||||
|
label = "lan";
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&edma {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&mdio {
|
||||||
|
pinctrl-0 = <&mdio_pins>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
reset-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
|
||||||
|
reset-delay-us = <10000>;
|
||||||
|
reset-post-delay-us = <50000>;
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
rtl8211f_4: ethernet-phy@4 {
|
||||||
|
reg = <4>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&switch {
|
||||||
|
switch_lan_bmp = <ESS_PORT5>;
|
||||||
|
switch_mac_mode1 = <MAC_MODE_SGMII_CHANNEL0>;
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
qcom,port_phyinfo {
|
||||||
|
port@4 {
|
||||||
|
port_id = <5>;
|
||||||
|
phy_address = <4>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&qpic_bam {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&qpic_nand {
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
nand@0 {
|
||||||
|
reg = <0>;
|
||||||
|
|
||||||
|
nand-ecc-strength = <4>;
|
||||||
|
nand-ecc-step-size = <512>;
|
||||||
|
nand-bus-width = <8>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&wifi {
|
||||||
|
ieee80211-freq-limit = <2402000 5835000>;
|
||||||
|
qcom,ath11k-calibration-variant = "TP-Link-EAP610-Outdoor";
|
||||||
|
status = "okay";
|
||||||
|
};
|
@ -68,6 +68,24 @@ define Device/qihoo_360v6
|
|||||||
endef
|
endef
|
||||||
TARGET_DEVICES += qihoo_360v6
|
TARGET_DEVICES += qihoo_360v6
|
||||||
|
|
||||||
|
define Device/tplink_eap610-outdoor
|
||||||
|
$(call Device/FitImage)
|
||||||
|
$(call Device/UbiFit)
|
||||||
|
DEVICE_VENDOR := TP-Link
|
||||||
|
DEVICE_MODEL := EAP610-Outdoor
|
||||||
|
BLOCKSIZE := 128k
|
||||||
|
PAGESIZE := 2048
|
||||||
|
SOC := ipq6018
|
||||||
|
DEVICE_PACKAGES := ipq-wifi-tplink_eap610-outdoor
|
||||||
|
IMAGES += web-ui-factory.bin
|
||||||
|
IMAGE/web-ui-factory.bin := append-ubi | tplink-image-2022
|
||||||
|
TPLINK_SUPPORT_STRING := SupportList: \
|
||||||
|
EAP610-Outdoor(TP-Link|UN|AX1800-D):1.0 \
|
||||||
|
EAP610-Outdoor(TP-Link|JP|AX1800-D):1.0 \
|
||||||
|
EAP610-Outdoor(TP-Link|CA|AX1800-D):1.0
|
||||||
|
endef
|
||||||
|
TARGET_DEVICES += tplink_eap610-outdoor
|
||||||
|
|
||||||
define Device/yuncore_fap650
|
define Device/yuncore_fap650
|
||||||
$(call Device/FitImage)
|
$(call Device/FitImage)
|
||||||
$(call Device/UbiFit)
|
$(call Device/UbiFit)
|
||||||
|
@ -23,6 +23,9 @@ ipq60xx_setup_interfaces()
|
|||||||
qihoo,360v6)
|
qihoo,360v6)
|
||||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
|
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
|
||||||
;;
|
;;
|
||||||
|
tplink,eap610-outdoor)
|
||||||
|
ucidef_set_interface_lan "lan" "dhcp"
|
||||||
|
;;
|
||||||
linksys,mr7350|\
|
linksys,mr7350|\
|
||||||
yuncore,fap650)
|
yuncore,fap650)
|
||||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
|
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
|
||||||
@ -51,6 +54,10 @@ ipq60xx_setup_macs()
|
|||||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||||
label_mac=$lan_mac
|
label_mac=$lan_mac
|
||||||
;;
|
;;
|
||||||
|
tplink,eap610-outdoor)
|
||||||
|
label_mac=$(get_mac_binary /tmp/factory_data/default-mac 0)
|
||||||
|
lan_mac=$label_mac
|
||||||
|
;;
|
||||||
esac
|
esac
|
||||||
|
|
||||||
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
|
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
|
||||||
|
@ -32,6 +32,13 @@ case "$FIRMWARE" in
|
|||||||
ath11k_patch_mac $(macaddr_add $label_mac 2) 1
|
ath11k_patch_mac $(macaddr_add $label_mac 2) 1
|
||||||
ath11k_set_macflag
|
ath11k_set_macflag
|
||||||
;;
|
;;
|
||||||
|
tplink,eap610-outdoor)
|
||||||
|
caldata_from_file "/tmp/factory_data/radio" 0 0x10000
|
||||||
|
label_mac=$(get_mac_binary /tmp/factory_data/default-mac 0)
|
||||||
|
ath11k_patch_mac $label_mac 1
|
||||||
|
ath11k_patch_mac $(macaddr_add $label_mac 1) 0
|
||||||
|
ath11k_set_macflag
|
||||||
|
;;
|
||||||
yuncore,fap650)
|
yuncore,fap650)
|
||||||
caldata_extract "0:art" 0x1000 0x20000
|
caldata_extract "0:art" 0x1000 0x20000
|
||||||
;;
|
;;
|
||||||
|
@ -0,0 +1,19 @@
|
|||||||
|
#!/bin/sh
|
||||||
|
|
||||||
|
preinit_mount_factory_data() {
|
||||||
|
local mtd_path
|
||||||
|
|
||||||
|
. /lib/functions.sh
|
||||||
|
. /lib/functions/system.sh
|
||||||
|
|
||||||
|
case $(board_name) in
|
||||||
|
tplink,eap610-outdoor)
|
||||||
|
mtd_path=$(find_mtd_chardev "factory_data")
|
||||||
|
ubiattach --dev-path="$mtd_path" --devn=1
|
||||||
|
mkdir /tmp/factory_data
|
||||||
|
mount -o ro,noatime -t ubifs ubi1:ubi_factory_data /tmp/factory_data
|
||||||
|
;;
|
||||||
|
esac
|
||||||
|
}
|
||||||
|
|
||||||
|
boot_hook_add preinit_main preinit_mount_factory_data
|
@ -4,6 +4,79 @@ REQUIRE_IMAGE_METADATA=1
|
|||||||
RAMFS_COPY_BIN='fw_printenv fw_setenv head'
|
RAMFS_COPY_BIN='fw_printenv fw_setenv head'
|
||||||
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
|
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
|
||||||
|
|
||||||
|
remove_oem_ubi_volume() {
|
||||||
|
local oem_volume_name="$1"
|
||||||
|
local oem_ubivol
|
||||||
|
local mtdnum
|
||||||
|
local ubidev
|
||||||
|
|
||||||
|
mtdnum=$(find_mtd_index "$CI_UBIPART")
|
||||||
|
if [ ! "$mtdnum" ]; then
|
||||||
|
return
|
||||||
|
fi
|
||||||
|
|
||||||
|
ubidev=$(nand_find_ubi "$CI_UBIPART")
|
||||||
|
if [ ! "$ubidev" ]; then
|
||||||
|
ubiattach --mtdn="$mtdnum"
|
||||||
|
ubidev=$(nand_find_ubi "$CI_UBIPART")
|
||||||
|
fi
|
||||||
|
|
||||||
|
if [ "$ubidev" ]; then
|
||||||
|
oem_ubivol=$(nand_find_volume "$ubidev" "$oem_volume_name")
|
||||||
|
[ "$oem_ubivol" ] && ubirmvol "/dev/$ubidev" --name="$oem_volume_name"
|
||||||
|
fi
|
||||||
|
}
|
||||||
|
|
||||||
|
tplink_get_boot_part() {
|
||||||
|
local cur_boot_part
|
||||||
|
local args
|
||||||
|
|
||||||
|
# Try to find rootfs from kernel arguments
|
||||||
|
read -r args < /proc/cmdline
|
||||||
|
for arg in $args; do
|
||||||
|
local ubi_mtd_arg=${arg#ubi.mtd=}
|
||||||
|
case "$ubi_mtd_arg" in
|
||||||
|
rootfs|rootfs_1)
|
||||||
|
echo "$ubi_mtd_arg"
|
||||||
|
return
|
||||||
|
;;
|
||||||
|
esac
|
||||||
|
done
|
||||||
|
|
||||||
|
# Fallback to u-boot env (e.g. when running initramfs)
|
||||||
|
cur_boot_part="$(/usr/sbin/fw_printenv -n tp_boot_idx)"
|
||||||
|
case $cur_boot_part in
|
||||||
|
1)
|
||||||
|
echo rootfs_1
|
||||||
|
;;
|
||||||
|
0|*)
|
||||||
|
echo rootfs
|
||||||
|
;;
|
||||||
|
esac
|
||||||
|
}
|
||||||
|
|
||||||
|
tplink_do_upgrade() {
|
||||||
|
local new_boot_part
|
||||||
|
|
||||||
|
case $(tplink_get_boot_part) in
|
||||||
|
rootfs)
|
||||||
|
CI_UBIPART="rootfs_1"
|
||||||
|
new_boot_part=1
|
||||||
|
;;
|
||||||
|
rootfs_1)
|
||||||
|
CI_UBIPART="rootfs"
|
||||||
|
new_boot_part=0
|
||||||
|
;;
|
||||||
|
esac
|
||||||
|
|
||||||
|
fw_setenv -s - <<-EOF
|
||||||
|
tp_boot_idx $new_boot_part
|
||||||
|
EOF
|
||||||
|
|
||||||
|
remove_oem_ubi_volume ubi_rootfs
|
||||||
|
nand_do_upgrade "$1"
|
||||||
|
}
|
||||||
|
|
||||||
platform_check_image() {
|
platform_check_image() {
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
@ -55,6 +128,9 @@ platform_do_upgrade() {
|
|||||||
qihoo,360v6)
|
qihoo,360v6)
|
||||||
nand_do_upgrade "$1"
|
nand_do_upgrade "$1"
|
||||||
;;
|
;;
|
||||||
|
tplink,eap610-outdoor)
|
||||||
|
tplink_do_upgrade "$1"
|
||||||
|
;;
|
||||||
yuncore,fap650)
|
yuncore,fap650)
|
||||||
[ "$(fw_printenv -n owrt_env_ver 2>/dev/null)" != "7" ] && yuncore_fap650_env_setup
|
[ "$(fw_printenv -n owrt_env_ver 2>/dev/null)" != "7" ] && yuncore_fap650_env_setup
|
||||||
local active="$(fw_printenv -n owrt_slotactive 2>/dev/null)"
|
local active="$(fw_printenv -n owrt_slotactive 2>/dev/null)"
|
||||||
|
Loading…
x
Reference in New Issue
Block a user