mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 13:48:06 +00:00
ath79: add support for Buffalo WHR-G301N
Buffalo WHR-G301N is a 2.4 GHz 11n router, based on Atheros AR7240. Ported from ar71xx target. Specification: - Atheros AR7240 - 32 MB of RAM - 4 MB of Flash - 2.4 GHz 2T2R wifi - 5x 10/100 Mbps Ethernet - 9x LEDs, 4x keys - LED: 8x gpio-leds, 1x ath9k-leds - key: 2x buttons, 1x slide switch - UART header on PCB - Vcc, GND, TX, RX from LEDs side - 115200n8 Flash instruction using factory image: 1. Connect the computer to the LAN port of WHR-G301N 2. Connect power cable to WHR-G301N and turn on it 3. Access to "http://192.168.11.1/" and open firmware update page ("ファーム更新") 4. Select the OpenWrt factory image and click execute ("実行") button 5. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [fix the SUPPORTED_DEVICES to be compatible with the ar71xx image] Signed-off-by: Mathias Kresin <dev@kresin.me>
This commit is contained in:
INAGAKI Hiroshi
Mathias Kresin
parent
c9e9a78734
commit
9e6f22e309
@ -17,6 +17,13 @@ avm,fritz300e)
|
||||
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssi3" "wlan0" "60" "100"
|
||||
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi4" "wlan0" "80" "100"
|
||||
;;
|
||||
buffalo,whr-g301n)
|
||||
ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
|
||||
ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x02"
|
||||
ucidef_set_led_switch "lan2" "LAN2" "$boardname:green:lan2" "switch0" "0x04"
|
||||
ucidef_set_led_switch "lan3" "LAN3" "$boardname:green:lan3" "switch0" "0x08"
|
||||
ucidef_set_led_switch "lan4" "LAN4" "$boardname:green:lan4" "switch0" "0x10"
|
||||
;;
|
||||
etactica,eg200)
|
||||
ucidef_set_led_netdev "lan" "LAN" "$boardname:red:eth0" "eth0"
|
||||
ucidef_set_led_oneshot "modbus" "Modbus" "$boardname:red:modbus" "100" "33"
|
||||
|
||||
@ -83,6 +83,7 @@ ath79_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
|
||||
;;
|
||||
buffalo,whr-g301n|\
|
||||
tplink,tl-mr3220-v1|\
|
||||
tplink,tl-mr3420-v1|\
|
||||
tplink,tl-wr841-v7)
|
||||
|
||||
@ -111,6 +111,11 @@ case "$FIRMWARE" in
|
||||
avm,fritz300e)
|
||||
ath9k_eeprom_extract_reverse "urloader" 5441 1088
|
||||
;;
|
||||
buffalo,whr-g301n|\
|
||||
tplink,tl-wr841-v5|\
|
||||
tplink,tl-wr941-v4)
|
||||
ath9k_eeprom_extract "art" 4096 3768
|
||||
;;
|
||||
ocedo,raccoon|\
|
||||
tplink,tl-wdr3600|\
|
||||
tplink,tl-wdr4300|\
|
||||
@ -131,10 +136,6 @@ case "$FIRMWARE" in
|
||||
ubnt,unifi)
|
||||
ath9k_eeprom_extract "art" 4096 2048
|
||||
;;
|
||||
tplink,tl-wr841-v5|\
|
||||
tplink,tl-wr941-v4)
|
||||
ath9k_eeprom_extract "art" 4096 3768
|
||||
;;
|
||||
*)
|
||||
ath9k_eeprom_die "board $board is not supported yet"
|
||||
;;
|
||||
|
||||
192
target/linux/ath79/dts/ar7240_buffalo_whr-g301n.dts
Normal file
192
target/linux/ath79/dts/ar7240_buffalo_whr-g301n.dts
Normal file
@ -0,0 +1,192 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "ar7240.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "buffalo,whr-g301n", "qca,ar7240";
|
||||
model = "Buffalo WHR-G301N";
|
||||
|
||||
aliases {
|
||||
led-boot = &diag;
|
||||
led-failsafe = &diag;
|
||||
led-upgrade = &diag;
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <20>;
|
||||
|
||||
router_on {
|
||||
label = "router_on";
|
||||
linux,code = <BTN_2>;
|
||||
linux,input-type = <EV_SW>;
|
||||
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
router_off {
|
||||
label = "router_off";
|
||||
linux,code = <BTN_3>;
|
||||
linux,input-type = <EV_SW>;
|
||||
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&switch_led_pins>;
|
||||
|
||||
security {
|
||||
label = "whr-g301n:orange:security";
|
||||
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
diag: diag {
|
||||
label = "whr-g301n:red:diag";
|
||||
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
router {
|
||||
label = "whr-g301n:green:router";
|
||||
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan1 {
|
||||
label = "whr-g301n:green:lan1";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan2 {
|
||||
label = "whr-g301n:green:lan2";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan3 {
|
||||
label = "whr-g301n:green:lan3";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan4 {
|
||||
label = "whr-g301n:green:lan4";
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "whr-g301n:green:wan";
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
ath9k-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
wlan {
|
||||
label = "whr-g301n:green:wlan";
|
||||
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
reg = <0x0 0x3e000>;
|
||||
label = "u-boot";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3e000 {
|
||||
reg = <0x3e000 0x2000>;
|
||||
label = "u-boot-env";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
reg = <0x40000 0x3a0000>;
|
||||
label = "firmware";
|
||||
};
|
||||
|
||||
partition@3e0000 {
|
||||
reg = <0x3e0000 0x10000>;
|
||||
label = "user_property";
|
||||
read-only;
|
||||
};
|
||||
|
||||
art: partition@3f0000 {
|
||||
reg = <0x3f0000 0x10000>;
|
||||
label = "art";
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
mtd-mac-address = <&art 0x120c>;
|
||||
};
|
||||
|
||||
ð1 {
|
||||
status = "okay";
|
||||
|
||||
mtd-mac-address = <&art 0x120c>;
|
||||
mtd-mac-address-increment = <1>;
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
|
||||
ath9k: wifi@0,0 {
|
||||
compatible = "pci168c,002a";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
qca,no-eeprom;
|
||||
mtd-mac-address = <&art 0x120c>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
};
|
||||
};
|
||||
|
||||
&pinmux {
|
||||
switch_led_pins: switch_led_pins {
|
||||
pinctrl-single,bits = <0x0 0x0 0xf8>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
@ -1,5 +1,24 @@
|
||||
DEVICE_VARS += ROOTFS_SIZE
|
||||
|
||||
define Build/buffalo-tftp-header
|
||||
( \
|
||||
echo -n -e "# Airstation Public Fmt1" | dd bs=32 count=1 conv=sync; \
|
||||
dd if=$@; \
|
||||
) > $@.new
|
||||
mv $@.new $@
|
||||
endef
|
||||
|
||||
define Build/buffalo-tag
|
||||
$(eval product=$(word 1,$(1)))
|
||||
$(STAGING_DIR_HOST)/bin/buffalo-tag \
|
||||
-c 0x80041000 -d 0x801e8000 -w 3 \
|
||||
-a ath -v 1.99 -m 1.01 -f 1 \
|
||||
-b $(product) -p $(product) \
|
||||
-r M_ -l mlang8 \
|
||||
-i $@ -o $@.new
|
||||
mv $@.new $@
|
||||
endef
|
||||
|
||||
define Device/buffalo_bhr-4grv2
|
||||
ATH_SOC := qca9558
|
||||
DEVICE_TITLE := Buffalo BHR-4GRV2
|
||||
@ -16,3 +35,15 @@ define Device/buffalo_bhr-4grv2
|
||||
SUPPORTED_DEVICES += bhr-4grv2
|
||||
endef
|
||||
TARGET_DEVICES += buffalo_bhr-4grv2
|
||||
|
||||
define Device/buffalo_whr-g301n
|
||||
ATH_SOC := ar7240
|
||||
DEVICE_TITLE := Buffalo WHR-G301N
|
||||
IMAGE_SIZE := 3712k
|
||||
IMAGES += factory.bin tftp.bin
|
||||
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
||||
IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WHR-G301N 1.99 | buffalo-tag WHR-G301N
|
||||
IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header
|
||||
SUPPORTED_DEVICES += whr-g301n
|
||||
endef
|
||||
TARGET_DEVICES += buffalo_whr-g301n
|
||||
|
||||
Loading…
Reference in New Issue
Block a user