ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-02-18 16:40:29 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity

mediatek: copy files-6.1 to files-6.6

Browse Source 
Copy files from files-6.1 to files-6.6. No changes.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This commit is contained in:
Daniel Golle 2024-03-01 01:56:31 +00:00
parent c0e1e7542c
commit 9cb70f399c
29 changed files with 6422 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

32
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7981-rfb-mxl-2p5g-phy-eth1.dtso Normal file
View File

@ -0,0 +1,32 @@
/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
/dts-v1/;
/plugin/;
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "mediatek,mt7981-rfb", "mediatek,mt7981";
fragment@0 {
target = <&gmac1>;
__overlay__ {
phy-mode = "2500base-x";
phy-handle = <&phy5>;
};
};
fragment@1 {
target = <&mdio_bus>;
__overlay__ {
reset-gpios = <&pio 14 GPIO_ACTIVE_LOW>;
reset-delay-us = <600>;
reset-post-delay-us = <20000>;
phy5: ethernet-phy@5 {
reg = <5>;
compatible = "ethernet-phy-ieee802.3-c45";
phy-mode = "2500base-x";
};
};
};
};

33
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7981-rfb-mxl-2p5g-phy-swp5.dtso Normal file
View File

@ -0,0 +1,33 @@
/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
/dts-v1/;
/plugin/;
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "mediatek,mt7981-rfb", "mediatek,mt7981";
fragment@0 {
target = <&sw_p5>;
__overlay__ {
phy-mode = "2500base-x";
phy-handle = <&phy5>;
status = "okay";
};
};
fragment@1 {
target = <&mdio_bus>;
__overlay__ {
reset-gpios = <&pio 14 GPIO_ACTIVE_LOW>;
reset-delay-us = <600>;
reset-post-delay-us = <20000>;
phy5: ethernet-phy@5 {
reg = <5>;
compatible = "ethernet-phy-ieee802.3-c45";
phy-mode = "2500base-x";
};
};
};
};

66
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7981-rfb-spim-nand.dtso Normal file
View File

@ -0,0 +1,66 @@
/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
/dts-v1/;
/plugin/;
/ {
compatible = "mediatek,mt7981-rfb", "mediatek,mt7981";
fragment@0 {
target = <&spi0>;
__overlay__ {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
spi_nand: spi_nand@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-nand";
reg = <1>;
spi-max-frequency = <10000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "BL2";
reg = <0x00000 0x0100000>;
read-only;
};
partition@100000 {
label = "u-boot-env";
reg = <0x0100000 0x0080000>;
};
factory: partition@180000 {
label = "Factory";
reg = <0x180000 0x0200000>;
};
partition@380000 {
label = "FIP";
reg = <0x380000 0x0200000>;
};
partition@580000 {
label = "ubi";
reg = <0x580000 0x4000000>;
};
};
};
};
};
fragment@1 {
target = <&wifi>;
__overlay__ {
mediatek,mtd-eeprom = <&factory 0x0>;
status = "okay";
};
};
};

188
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7981-rfb.dts Normal file
View File

@ -0,0 +1,188 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2022 MediaTek Inc.
* Author: Sam.Shih <sam.shih@mediatek.com>
*/
/dts-v1/;
#include "mt7981.dtsi"
/ {
model = "MediaTek MT7981 RFB";
compatible = "mediatek,mt7981-rfb", "mediatek,mt7981";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory {
reg = <0 0x40000000 0 0x20000000>;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
reg_5v: regulator-5v {
compatible = "regulator-fixed";
regulator-name = "fixed-5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
};
gpio-keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
};
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
};
};
};
&eth {
status = "okay";
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
phy-mode = "gmii";
phy-handle = <&int_gbe_phy>;
};
};
&mdio_bus {
switch: switch@1f {
compatible = "mediatek,mt7531";
reg = <31>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&pio>;
interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
};
};
&crypto {
status = "okay";
};
&pio {
spi0_flash_pins: spi0-pins {
mux {
function = "spi";
groups = "spi0", "spi0_wp_hold";
};
conf-pu {
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
};
conf-pd {
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
drive-strength = <MTK_DRIVE_8mA>;
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
};
};
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_flash_pins>;
cs-gpios = <0>, <0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
&switch {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@3 {
reg = <3>;
label = "lan4";
};
sw_p5: port@5 {
reg = <5>;
label = "lan5";
status = "disabled";
};
port@6 {
reg = <6>;
ethernet = <&gmac0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
};
};
&xhci {
vusb33-supply = <&reg_3p3v>;
vbus-supply = <&reg_5v>;
status = "okay";
};
&uart0 {
status = "okay";
};
&usb_phy {
status = "okay";
};
&watchdog {
status = "okay";
};

822
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7981.dtsi Normal file
View File

@ -0,0 +1,822 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (c) 2020 MediaTek Inc.
* Author: Sam.Shih <sam.shih@mediatek.com>
* Author: Jianhui Zhao <zhaojh329@gmail.com>
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/clock/mediatek,mt7981-clk.h>
#include <dt-bindings/reset/mt7986-resets.h>
#include <dt-bindings/pinctrl/mt65xx.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/mux/mux.h>
/ {
compatible = "mediatek,mt7981";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a53";
reg = <0x0>;
device_type = "cpu";
enable-method = "psci";
};
cpu@1 {
compatible = "arm,cortex-a53";
reg = <0x1>;
device_type = "cpu";
enable-method = "psci";
};
};
ice: ice_debug {
compatible = "mediatek,mt7981-ice_debug", "mediatek,mt2701-ice_debug";
clocks = <&infracfg CLK_INFRA_DBG_CK>;
clock-names = "ice_dbg";
};
clk40m: oscillator-40m {
compatible = "fixed-clock";
clock-frequency = <40000000>;
clock-output-names = "clkxtal";
#clock-cells = <0>;
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
fan: pwm-fan {
compatible = "pwm-fan";
/* cooling level (0, 1, 2, 3, 4, 5, 6, 7) : (0%/25%/37.5%/50%/62.5%/75%/87.5%/100% duty) */
cooling-levels = <0 63 95 127 159 191 223 255>;
#cooling-cells = <2>;
status = "disabled";
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
reserved-memory {
ranges;
#address-cells = <2>;
#size-cells = <2>;
/* 64 KiB reserved for ramoops/pstore */
ramoops@42ff0000 {
compatible = "ramoops";
reg = <0 0x42ff0000 0 0x10000>;
record-size = <0x1000>;
};
/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
secmon_reserved: secmon@43000000 {
reg = <0 0x43000000 0 0x30000>;
no-map;
};
wmcpu_emi: wmcpu-reserved@47c80000 {
reg = <0 0x47c80000 0 0x100000>;
no-map;
};
wo_emi0: wo-emi@47d80000 {
reg = <0 0x47d80000 0 0x40000>;
no-map;
};
wo_data: wo-data@47dc0000 {
reg = <0 0x47dc0000 0 0x240000>;
no-map;
};
};
soc {
compatible = "simple-bus";
ranges;
#address-cells = <2>;
#size-cells = <2>;
gic: interrupt-controller@c000000 {
compatible = "arm,gic-v3";
reg = <0 0x0c000000 0 0x40000>, /* GICD */
<0 0x0c080000 0 0x200000>; /* GICR */
interrupt-parent = <&gic>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <3>;
};
consys: consys@10000000 {
compatible = "mediatek,mt7981-consys";
reg = <0 0x10000000 0 0x8600000>;
memory-region = <&wmcpu_emi>;
};
infracfg: clock-controller@10001000 {
compatible = "mediatek,mt7981-infracfg", "syscon";
reg = <0 0x10001000 0 0x1000>;
#clock-cells = <1>;
};
wed_pcie: wed_pcie@10003000 {
compatible = "mediatek,wed_pcie";
reg = <0 0x10003000 0 0x10>;
};
topckgen: clock-controller@1001b000 {
compatible = "mediatek,mt7981-topckgen", "syscon";
reg = <0 0x1001b000 0 0x1000>;
#clock-cells = <1>;
};
watchdog: watchdog@1001c000 {
compatible = "mediatek,mt7986-wdt",
"mediatek,mt6589-wdt";
reg = <0 0x1001c000 0 0x1000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
status = "disabled";
};
apmixedsys: clock-controller@1001e000 {
compatible = "mediatek,mt7981-apmixedsys", "syscon";
reg = <0 0x1001e000 0 0x1000>;
#clock-cells = <1>;
};
pwm: pwm@10048000 {
compatible = "mediatek,mt7981-pwm";
reg = <0 0x10048000 0 0x1000>;
clocks = <&infracfg CLK_INFRA_PWM_STA>,
<&infracfg CLK_INFRA_PWM_HCK>,
<&infracfg CLK_INFRA_PWM1_CK>,
<&infracfg CLK_INFRA_PWM2_CK>,
<&infracfg CLK_INFRA_PWM3_CK>;
clock-names = "top", "main", "pwm1", "pwm2", "pwm3";
#pwm-cells = <2>;
};
sgmiisys0: syscon@10060000 {
compatible = "mediatek,mt7981-sgmiisys_0", "syscon";
reg = <0 0x10060000 0 0x1000>;
mediatek,pnswap;
#clock-cells = <1>;
};
sgmiisys1: syscon@10070000 {
compatible = "mediatek,mt7981-sgmiisys_1", "syscon";
reg = <0 0x10070000 0 0x1000>;
#clock-cells = <1>;
};
crypto: crypto@10320000 {
compatible = "inside-secure,safexcel-eip97";
reg = <0 0x10320000 0 0x40000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ring0", "ring1", "ring2", "ring3";
clocks = <&topckgen CLK_TOP_EIP97B>;
clock-names = "top_eip97_ck";
assigned-clocks = <&topckgen CLK_TOP_EIP97B_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_CB_NET1_D5>;
};
uart0: serial@11002000 {
compatible = "mediatek,mt6577-uart";
reg = <0 0x11002000 0 0x400>;
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&infracfg CLK_INFRA_UART0_SEL>,
<&infracfg CLK_INFRA_UART0_CK>;
clock-names = "baud", "bus";
assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
<&infracfg CLK_INFRA_UART0_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_CB_CKSQ_40M>,
<&topckgen CLK_TOP_UART_SEL>;
pinctrl-0 = <&uart0_pins>;
pinctrl-names = "default";
status = "disabled";
};
uart1: serial@11003000 {
compatible = "mediatek,mt6577-uart";
reg = <0 0x11003000 0 0x400>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&infracfg CLK_INFRA_UART1_SEL>,
<&infracfg CLK_INFRA_UART1_CK>;
clock-names = "baud", "bus";
assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
<&infracfg CLK_INFRA_UART1_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_CB_CKSQ_40M>,
<&topckgen CLK_TOP_UART_SEL>;
status = "disabled";
};
uart2: serial@11004000 {
compatible = "mediatek,mt6577-uart";
reg = <0 0x11004000 0 0x400>;
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&infracfg CLK_INFRA_UART2_SEL>,
<&infracfg CLK_INFRA_UART2_CK>;
clock-names = "baud", "bus";
assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
<&infracfg CLK_INFRA_UART2_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_CB_CKSQ_40M>,
<&topckgen CLK_TOP_UART_SEL>;
status = "disabled";
};
snand: snfi@11005000 {
compatible = "mediatek,mt7986-snand";
reg = <0 0x11005000 0 0x1000>, <0 0x11006000 0 0x1000>;
reg-names = "nfi", "ecc";
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&infracfg CLK_INFRA_SPINFI1_CK>,
<&infracfg CLK_INFRA_NFI1_CK>,
<&infracfg CLK_INFRA_NFI_HCK_CK>;
clock-names = "pad_clk", "nfi_clk", "nfi_hclk";
assigned-clocks = <&topckgen CLK_TOP_SPINFI_SEL>,
<&topckgen CLK_TOP_NFI1X_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_CB_M_D8>,
<&topckgen CLK_TOP_CB_M_D8>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c0: i2c@11007000 {
compatible = "mediatek,mt7981-i2c";
reg = <0 0x11007000 0 0x1000>,
<0 0x10217080 0 0x80>;
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
clock-div = <1>;
clocks = <&infracfg CLK_INFRA_I2C0_CK>,
<&infracfg CLK_INFRA_AP_DMA_CK>,
<&infracfg CLK_INFRA_I2C_MCK_CK>,
<&infracfg CLK_INFRA_I2C_PCK_CK>;
clock-names = "main", "dma", "arb", "pmic";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi2: spi@11009000 {
compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
reg = <0 0x11009000 0 0x100>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&topckgen CLK_TOP_CB_M_D2>,
<&topckgen CLK_TOP_SPI_SEL>,
<&infracfg CLK_INFRA_SPI2_CK>,
<&infracfg CLK_INFRA_SPI2_HCK_CK>;
clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi0: spi@1100a000 {
compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
reg = <0 0x1100a000 0 0x100>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&topckgen CLK_TOP_CB_M_D2>,
<&topckgen CLK_TOP_SPI_SEL>,
<&infracfg CLK_INFRA_SPI0_CK>,
<&infracfg CLK_INFRA_SPI0_HCK_CK>;
clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi1: spi@1100b000 {
compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
reg = <0 0x1100b000 0 0x100>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&topckgen CLK_TOP_CB_M_D2>,
<&topckgen CLK_TOP_SPIM_MST_SEL>,
<&infracfg CLK_INFRA_SPI1_CK>,
<&infracfg CLK_INFRA_SPI1_HCK_CK>;
clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
thermal: thermal@1100c800 {
compatible = "mediatek,mt7981-thermal", "mediatek,mt7986-thermal";
reg = <0 0x1100c800 0 0x800>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&infracfg CLK_INFRA_THERM_CK>,
<&infracfg CLK_INFRA_ADC_26M_CK>;
clock-names = "therm", "auxadc";
nvmem-cells = <&thermal_calibration>;
nvmem-cell-names = "calibration-data";
#thermal-sensor-cells = <1>;
mediatek,auxadc = <&auxadc>;
mediatek,apmixedsys = <&apmixedsys>;
};
auxadc: adc@1100d000 {
compatible = "mediatek,mt7981-auxadc",
"mediatek,mt7986-auxadc",
"mediatek,mt7622-auxadc";
reg = <0 0x1100d000 0 0x1000>;
clocks = <&infracfg CLK_INFRA_ADC_26M_CK>,
<&infracfg CLK_INFRA_ADC_FRC_CK>;
clock-names = "main", "32k";
#io-channel-cells = <1>;
};
xhci: usb@11200000 {
compatible = "mediatek,mt7986-xhci",
"mediatek,mtk-xhci";
reg = <0 0x11200000 0 0x2e00>,
<0 0x11203e00 0 0x0100>;
reg-names = "mac", "ippc";
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&infracfg CLK_INFRA_IUSB_SYS_CK>,
<&infracfg CLK_INFRA_IUSB_CK>,
<&infracfg CLK_INFRA_IUSB_133_CK>,
<&infracfg CLK_INFRA_IUSB_66M_CK>,
<&topckgen CLK_TOP_U2U3_XHCI_SEL>;
clock-names = "sys_ck",
"ref_ck",
"mcu_ck",
"dma_ck",
"xhci_ck";
phys = <&u2port0 PHY_TYPE_USB2>,
<&u3port0 PHY_TYPE_USB3>;
vusb33-supply = <&reg_3p3v>;
status = "disabled";
};
afe: audio-controller@11210000 {
compatible = "mediatek,mt79xx-audio";
reg = <0 0x11210000 0 0x9000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&infracfg CLK_INFRA_AUD_BUS_CK>,
<&infracfg CLK_INFRA_AUD_26M_CK>,
<&infracfg CLK_INFRA_AUD_L_CK>,
<&infracfg CLK_INFRA_AUD_AUD_CK>,
<&infracfg CLK_INFRA_AUD_EG2_CK>,
<&topckgen CLK_TOP_AUD_SEL>;
clock-names = "aud_bus_ck",
"aud_26m_ck",
"aud_l_ck",
"aud_aud_ck",
"aud_eg2_ck",
"aud_sel";
assigned-clocks = <&topckgen CLK_TOP_AUD_SEL>,
<&topckgen CLK_TOP_A1SYS_SEL>,
<&topckgen CLK_TOP_AUD_L_SEL>,
<&topckgen CLK_TOP_A_TUNER_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_CB_APLL2_196M>,
<&topckgen CLK_TOP_APLL2_D4>,
<&topckgen CLK_TOP_CB_APLL2_196M>,
<&topckgen CLK_TOP_APLL2_D4>;
status = "disabled";
};
mmc0: mmc@11230000 {
compatible = "mediatek,mt7986-mmc", "mediatek,mt7981-mmc";
reg = <0 0x11230000 0 0x1000>, <0 0x11c20000 0 0x1000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&infracfg CLK_INFRA_MSDC_CK>,
<&infracfg CLK_INFRA_MSDC_HCK_CK>,
<&infracfg CLK_INFRA_MSDC_66M_CK>,
<&infracfg CLK_INFRA_MSDC_133M_CK>;
assigned-clocks = <&topckgen CLK_TOP_EMMC_208M_SEL>,
<&topckgen CLK_TOP_EMMC_400M_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_CB_M_D2>,
<&topckgen CLK_TOP_CB_NET2_D2>;
clock-names = "source", "hclk", "axi_cg", "ahb_cg";
status = "disabled";
};
pcie: pcie@11280000 {
compatible = "mediatek,mt7981-pcie",
"mediatek,mt7986-pcie";
reg = <0 0x11280000 0 0x4000>;
reg-names = "pcie-mac";
ranges = <0x82000000 0 0x20000000
0x0 0x20000000 0 0x10000000>;
device_type = "pci";
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
bus-range = <0x00 0xff>;
clocks = <&infracfg CLK_INFRA_IPCIE_CK>,
<&infracfg CLK_INFRA_IPCIE_PIPE_CK>,
<&infracfg CLK_INFRA_IPCIER_CK>,
<&infracfg CLK_INFRA_IPCIEB_CK>;
phys = <&u3port0 PHY_TYPE_PCIE>;
phy-names = "pcie-phy";
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc 0>,
<0 0 0 2 &pcie_intc 1>,
<0 0 0 3 &pcie_intc 2>,
<0 0 0 4 &pcie_intc 3>;
#interrupt-cells = <1>;
#address-cells = <3>;
#size-cells = <2>;
status = "disabled";
pcie_intc: interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
#address-cells = <0>;
};
};
pio: pinctrl@11d00000 {
compatible = "mediatek,mt7981-pinctrl";
reg = <0 0x11d00000 0 0x1000>,
<0 0x11c00000 0 0x1000>,
<0 0x11c10000 0 0x1000>,
<0 0x11d20000 0 0x1000>,
<0 0x11e00000 0 0x1000>,
<0 0x11e20000 0 0x1000>,
<0 0x11f00000 0 0x1000>,
<0 0x11f10000 0 0x1000>,
<0 0x1000b000 0 0x1000>;
reg-names = "gpio", "iocfg_rt", "iocfg_rm",
"iocfg_rb", "iocfg_lb", "iocfg_bl",
"iocfg_tm", "iocfg_tl", "eint";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pio 0 0 56>;
interrupt-controller;
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
#interrupt-cells = <2>;
mdio_pins: mdc-mdio-pins {
mux {
function = "eth";
groups = "smi_mdc_mdio";
};
};
uart0_pins: uart0-pins {
mux {
function = "uart";
groups = "uart0";
};
};
wifi_dbdc_pins: wifi-dbdc-pins {
mux {
function = "eth";
groups = "wf0_mode1";
};
conf {
pins = "WF_HB1", "WF_HB2", "WF_HB3", "WF_HB4",
"WF_HB0", "WF_HB0_B", "WF_HB5", "WF_HB6",
"WF_HB7", "WF_HB8", "WF_HB9", "WF_HB10",
"WF_TOP_CLK", "WF_TOP_DATA", "WF_XO_REQ",
"WF_CBA_RESETB", "WF_DIG_RESETB";
drive-strength = <4>;
};
};
gbe_led0_pins: gbe-led0-pins {
mux {
function = "led";
groups = "gbe_led0";
};
};
gbe_led1_pins: gbe-led1-pins {
mux {
function = "led";
groups = "gbe_led1";
};
};
};
topmisc: topmisc@11d10000 {
compatible = "mediatek,mt7981-topmisc", "syscon";
reg = <0 0x11d10000 0 0x10000>;
#clock-cells = <1>;
};
usb_phy: usb-phy@11e10000 {
compatible = "mediatek,mt7981",
"mediatek,generic-tphy-v2";
ranges = <0 0 0x11e10000 0x1700>;
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
u2port0: usb-phy@0 {
reg = <0x0 0x700>;
clocks = <&topckgen CLK_TOP_USB_FRMCNT_SEL>;
clock-names = "ref";
#phy-cells = <1>;
};
u3port0: usb-phy@700 {
reg = <0x700 0x900>;
clocks = <&topckgen CLK_TOP_USB3_PHY_SEL>;
clock-names = "ref";
#phy-cells = <1>;
mediatek,syscon-type = <&topmisc 0x218 0>;
status = "okay";
};
};
efuse: efuse@11f20000 {
compatible = "mediatek,mt7981-efuse",
"mediatek,efuse";
reg = <0 0x11f20000 0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
status = "okay";
thermal_calibration: thermal-calib@274 {
reg = <0x274 0xc>;
};
phy_calibration: phy-calib@8dc {
reg = <0x8dc 0x10>;
};
comb_rx_imp_p0: usb3-rx-imp@8c8 {
reg = <0x8c8 1>;
bits = <0 5>;
};
comb_tx_imp_p0: usb3-tx-imp@8c8 {
reg = <0x8c8 2>;
bits = <5 5>;
};
comb_intr_p0: usb3-intr@8c9 {
reg = <0x8c9 1>;
bits = <2 6>;
};
};
ethsys: clock-controller@15000000 {
compatible = "mediatek,mt7981-ethsys",
"syscon";
reg = <0 0x15000000 0 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
};
wed: wed@15010000 {
compatible = "mediatek,mt7981-wed",
"mediatek,mt7986-wed",
"syscon";
reg = <0 0x15010000 0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
memory-region = <&wo_emi0>, <&wo_data>;
memory-region-names = "wo-emi", "wo-data";
mediatek,wo-ccif = <&wo_ccif0>;
mediatek,wo-ilm = <&wo_ilm0>;
mediatek,wo-dlm = <&wo_dlm0>;
mediatek,wo-cpuboot = <&wo_cpuboot>;
};
eth: ethernet@15100000 {
compatible = "mediatek,mt7981-eth";
reg = <0 0x15100000 0 0x80000>;
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ethsys CLK_ETH_FE_EN>,
<&ethsys CLK_ETH_GP2_EN>,
<&ethsys CLK_ETH_GP1_EN>,
<&ethsys CLK_ETH_WOCPU0_EN>,
<&sgmiisys0 CLK_SGM0_TX_EN>,
<&sgmiisys0 CLK_SGM0_RX_EN>,
<&sgmiisys0 CLK_SGM0_CK0_EN>,
<&sgmiisys0 CLK_SGM0_CDR_CK0_EN>,
<&sgmiisys1 CLK_SGM1_TX_EN>,
<&sgmiisys1 CLK_SGM1_RX_EN>,
<&sgmiisys1 CLK_SGM1_CK1_EN>,
<&sgmiisys1 CLK_SGM1_CDR_CK1_EN>,
<&topckgen CLK_TOP_SGM_REG>,
<&topckgen CLK_TOP_NETSYS_SEL>,
<&topckgen CLK_TOP_NETSYS_500M_SEL>;
clock-names = "fe", "gp2", "gp1", "wocpu0",
"sgmii_tx250m", "sgmii_rx250m",
"sgmii_cdr_ref", "sgmii_cdr_fb",
"sgmii2_tx250m", "sgmii2_rx250m",
"sgmii2_cdr_ref", "sgmii2_cdr_fb",
"sgmii_ck", "netsys0", "netsys1";
assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>,
<&topckgen CLK_TOP_SGM_325M_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_CB_NET2_800M>,
<&topckgen CLK_TOP_CB_SGM_325M>;
mediatek,ethsys = <&ethsys>;
mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
mediatek,infracfg = <&topmisc>;
mediatek,wed = <&wed>;
#reset-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
mdio_bus: mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
int_gbe_phy: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
phy-mode = "gmii";
phy-is-integrated;
nvmem-cells = <&phy_calibration>;
nvmem-cell-names = "phy-cal-data";
leds {
#address-cells = <1>;
#size-cells = <0>;
int_gbe_phy_led0: int-gbe-phy-led0@0 {
reg = <0>;
function = LED_FUNCTION_LAN;
status = "disabled";
};
int_gbe_phy_led1: int-gbe-phy-led1@1 {
reg = <1>;
function = LED_FUNCTION_LAN;
status = "disabled";
};
};
};
};
};
wdma: wdma@15104800 {
compatible = "mediatek,wed-wdma";
reg = <0 0x15104800 0 0x400>,
<0 0x15104c00 0 0x400>;
};
wo_cpuboot: syscon@15194000 {
compatible = "mediatek,mt7986-wo-cpuboot", "syscon";
reg = <0 0x15194000 0 0x1000>;
};
ap2woccif: ap2woccif@151a5000 {
compatible = "mediatek,ap2woccif";
reg = <0 0x151a5000 0 0x1000>,
<0 0x151ad000 0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
};
wo_ccif0: syscon@151a5000 {
compatible = "mediatek,mt7986-wo-ccif", "syscon";
reg = <0 0x151a5000 0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
};
wo_ilm0: syscon@151e0000 {
compatible = "mediatek,mt7986-wo-ilm", "syscon";
reg = <0 0x151e0000 0 0x8000>;
};
wo_dlm0: syscon@151e8000 {
compatible = "mediatek,mt7986-wo-dlm", "syscon";
reg = <0 0x151e8000 0 0x2000>;
};
wifi: wifi@18000000 {
compatible = "mediatek,mt7981-wmac";
reg = <0 0x18000000 0 0x1000000>,
<0 0x10003000 0 0x1000>,
<0 0x11d10000 0 0x1000>;
resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>;
reset-names = "consys";
pinctrl-0 = <&wifi_dbdc_pins>;
pinctrl-names = "dbdc";
clocks = <&topckgen CLK_TOP_NETSYS_MCU_SEL>,
<&topckgen CLK_TOP_AP2CNN_HOST_SEL>;
clock-names = "mcu", "ap2conn";
interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
memory-region = <&wmcpu_emi>;
status = "disabled";
};
};
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <1000>;
polling-delay = <1000>;
thermal-sensors = <&thermal 0>;
trips {
cpu_trip_active_highest: active-highest {
temperature = <70000>;
hysteresis = <2000>;
type = "active";
};
cpu_trip_active_high: active-high {
temperature = <60000>;
hysteresis = <2000>;
type = "active";
};
cpu_trip_active_med: active-med {
temperature = <50000>;
hysteresis = <2000>;
type = "active";
};
cpu_trip_active_low: active-low {
temperature = <45000>;
hysteresis = <2000>;
type = "active";
};
cpu_trip_active_lowest: active-lowest {
temperature = <40000>;
hysteresis = <2000>;
type = "active";
};
};
cooling-maps {
cpu-active-highest {
/* active: set fan to cooling level 7 */
cooling-device = <&fan 7 7>;
trip = <&cpu_trip_active_highest>;
};
cpu-active-high {
/* active: set fan to cooling level 5 */
cooling-device = <&fan 5 5>;
trip = <&cpu_trip_active_high>;
};
cpu-active-med {
/* active: set fan to cooling level 3 */
cooling-device = <&fan 3 3>;
trip = <&cpu_trip_active_med>;
};
cpu-active-low {
/* active: set fan to cooling level 2 */
cooling-device = <&fan 2 2>;
trip = <&cpu_trip_active_low>;
};
cpu-active-lowest {
/* active: set fan to cooling level 1 */
cooling-device = <&fan 1 1>;
trip = <&cpu_trip_active_lowest>;
};
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
clock-frequency = <13000000>;
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
};
trng {
compatible = "mediatek,mt7981-rng";
};
};

52
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7986a-rfb-spim-nand.dts Normal file
View File

@ -0,0 +1,52 @@
/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
#include "mt7986a-rfb.dtsi"
/ {
compatible = "mediatek,mt7986a-rfb-snand";
};
&spi0 {
status = "okay";
spi_nand: spi_nand@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-nand";
reg = <1>;
spi-max-frequency = <10000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "BL2";
reg = <0x00000 0x0100000>;
read-only;
};
partition@100000 {
label = "u-boot-env";
reg = <0x0100000 0x0080000>;
};
factory: partition@180000 {
label = "Factory";
reg = <0x180000 0x0200000>;
};
partition@380000 {
label = "FIP";
reg = <0x380000 0x0200000>;
};
partition@580000 {
label = "ubi";
reg = <0x580000 0x4000000>;
};
};
};
};
&wifi {
mediatek,mtd-eeprom = <&factory 0>;
};

51
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7986a-rfb-spim-nor.dts Normal file
View File

@ -0,0 +1,51 @@
/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
#include "mt7986a-rfb.dtsi"
/ {
compatible = "mediatek,mt7986a-rfb-snor";
};
&spi0 {
status = "okay";
spi_nor: spi_nor@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <52000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@00000 {
label = "BL2";
reg = <0x00000 0x0040000>;
};
partition@40000 {
label = "u-boot-env";
reg = <0x40000 0x0010000>;
};
factory: partition@50000 {
label = "Factory";
reg = <0x50000 0x00B0000>;
};
partition@100000 {
label = "FIP";
reg = <0x100000 0x0080000>;
};
partition@180000 {
label = "firmware";
reg = <0x180000 0xE00000>;
};
};
};
};
&wifi {
mediatek,mtd-eeprom = <&factory 0>;
};

389
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dtsi Normal file
View File

@ -0,0 +1,389 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2021 MediaTek Inc.
* Author: Sam.Shih <sam.shih@mediatek.com>
*/
/dts-v1/;
#include "mt7986a.dtsi"
/ {
model = "MediaTek MT7986a RFB";
compatible = "mediatek,mt7986a-rfb";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory {
reg = <0 0x40000000 0 0x40000000>;
};
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
reg_5v: regulator-5v {
compatible = "regulator-fixed";
regulator-name = "fixed-5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
};
};
&eth {
status = "okay";
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
phy-mode = "2500base-x";
};
mdio: mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
};
};
&wifi {
status = "okay";
pinctrl-names = "default", "dbdc";
pinctrl-0 = <&wf_2g_5g_pins>;
pinctrl-1 = <&wf_dbdc_pins>;
};
&mdio {
phy5: phy@5 {
compatible = "ethernet-phy-id67c9.de0a";
reg = <5>;
reset-gpios = <&pio 6 1>;
reset-deassert-us = <20000>;
};
phy6: phy@6 {
compatible = "ethernet-phy-id67c9.de0a";
reg = <6>;
};
switch: switch@1f {
compatible = "mediatek,mt7531";
reg = <31>;
reset-gpios = <&pio 5 0>;
};
};
&crypto {
status = "okay";
};
&mmc0 {
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&mmc0_pins_default>;
pinctrl-1 = <&mmc0_pins_uhs>;
bus-width = <8>;
max-frequency = <200000000>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
hs400-ds-delay = <0x14014>;
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_1p8v>;
non-removable;
no-sd;
no-sdio;
status = "okay";
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pcie_pins>;
status = "okay";
};
&pcie_phy {
status = "okay";
};
&pio {
mmc0_pins_default: mmc0-pins {
mux {
function = "emmc";
groups = "emmc_51";
};
conf-cmd-dat {
pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
"EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
"EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
input-enable;
drive-strength = <4>;
mediatek,pull-up-adv = <1>; /* pull-up 10K */
};
conf-clk {
pins = "EMMC_CK";
drive-strength = <6>;
mediatek,pull-down-adv = <2>; /* pull-down 50K */
};
conf-ds {
pins = "EMMC_DSL";
mediatek,pull-down-adv = <2>; /* pull-down 50K */
};
conf-rst {
pins = "EMMC_RSTB";
drive-strength = <4>;
mediatek,pull-up-adv = <1>; /* pull-up 10K */
};
};
mmc0_pins_uhs: mmc0-uhs-pins {
mux {
function = "emmc";
groups = "emmc_51";
};
conf-cmd-dat {
pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
"EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
"EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
input-enable;
drive-strength = <4>;
mediatek,pull-up-adv = <1>; /* pull-up 10K */
};
conf-clk {
pins = "EMMC_CK";
drive-strength = <6>;
mediatek,pull-down-adv = <2>; /* pull-down 50K */
};
conf-ds {
pins = "EMMC_DSL";
mediatek,pull-down-adv = <2>; /* pull-down 50K */
};
conf-rst {
pins = "EMMC_RSTB";
drive-strength = <4>;
mediatek,pull-up-adv = <1>; /* pull-up 10K */
};
};
pcie_pins: pcie-pins {
mux {
function = "pcie";
groups = "pcie_clk", "pcie_wake", "pcie_pereset";
};
};
spic_pins_g2: spic-pins-29-to-32 {
mux {
function = "spi";
groups = "spi1_2";
};
};
spi_flash_pins: spi-flash-pins-33-to-38 {
mux {
function = "spi";
groups = "spi0", "spi0_wp_hold";
};
conf-pu {
pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
drive-strength = <8>;
mediatek,pull-up-adv = <0>; /* bias-disable */
};
conf-pd {
pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
drive-strength = <8>;
mediatek,pull-down-adv = <0>; /* bias-disable */
};
};
uart1_pins: uart1-pins {
mux {
function = "uart";
groups = "uart1";
};
};
uart2_pins: uart2-pins {
mux {
function = "uart";
groups = "uart2";
};
};
wf_2g_5g_pins: wf_2g_5g-pins {
mux {
function = "wifi";
groups = "wf_2g", "wf_5g";
};
conf {
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
"WF1_TOP_CLK", "WF1_TOP_DATA";
drive-strength = <4>;
};
};
wf_dbdc_pins: wf_dbdc-pins {
mux {
function = "wifi";
groups = "wf_dbdc";
};
conf {
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
"WF1_TOP_CLK", "WF1_TOP_DATA";
drive-strength = <4>;
};
};
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi_flash_pins>;
cs-gpios = <0>, <0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
&spi1 {
pinctrl-names = "default";
pinctrl-0 = <&spic_pins_g2>;
status = "okay";
proslic_spi: proslic_spi@0 {
compatible = "silabs,proslic_spi";
reg = <0>;
spi-max-frequency = <10000000>;
spi-cpha = <1>;
spi-cpol = <1>;
channel_count = <1>;
debug_level = <4>; /* 1 = TRC, 2 = DBG, 4 = ERR */
reset_gpio = <&pio 7 0>;
ig,enable-spi = <1>; /* 1: Enable, 0: Disable */
};
};
&gmac1 {
phy-mode = "2500base-x";
phy-connection-type = "2500base-x";
phy-handle = <&phy6>;
};
&switch {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@3 {
reg = <3>;
label = "lan4";
};
port@4 {
reg = <4>;
label = "wan";
};
port@5 {
reg = <5>;
label = "lan6";
phy-mode = "2500base-x";
phy-handle = <&phy5>;
};
port@6 {
reg = <6>;
ethernet = <&gmac0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
};
};
&ssusb {
vusb33-supply = <&reg_3p3v>;
vbus-supply = <&reg_5v>;
status = "okay";
};
&uart0 {
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
status = "okay";
};
&usb_phy {
status = "okay";
};

62
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtso Normal file
View File

@ -0,0 +1,62 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2021 MediaTek Inc.
* Author: Frank Wunderlich <frank-w@public-files.de>
*/
/dts-v1/;
/plugin/;
/ {
compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
fragment@0 {
target-path = "/soc/mmc@11230000";
__overlay__ {
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&mmc0_pins_emmc_51>;
pinctrl-1 = <&mmc0_pins_emmc_51>;
bus-width = <8>;
max-frequency = <200000000>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
hs400-ds-delay = <0x12814>;
vqmmc-supply = <&reg_1p8v>;
vmmc-supply = <&reg_3p3v>;
non-removable;
no-sd;
no-sdio;
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
card@0 {
compatible = "mmc-card";
reg = <0>;
block {
compatible = "block-device";
partitions {
block-partition-env {
partname = "ubootenv";
nvmem-layout {
compatible = "u-boot,env-layout";
};
};
emmc_rootfs: block-partition-production {
partname = "production";
};
};
};
};
};
};
fragment@2 {
target-path = "/chosen";
__overlay__ {
rootdisk-emmc = <&emmc_rootfs>;
};
};
};

19
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-rtc.dtso Normal file
View File

@ -0,0 +1,19 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2023
* Author: Daniel Golle <daniel@makrotopia.org>
*/
/dts-v1/;
/plugin/;
/ {
compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
fragment@0 {
target = <&pcf8563>;
__overlay__ {
status = "okay";
};
};
};

60
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-sd.dtso Normal file
View File

@ -0,0 +1,60 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2023 MediaTek Inc.
* Author: Frank Wunderlich <frank-w@public-files.de>
*/
/dts-v1/;
/plugin/;
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
fragment@1 {
target-path = "/soc/mmc@11230000";
__overlay__ {
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&mmc0_pins_sdcard>;
pinctrl-1 = <&mmc0_pins_sdcard>;
cd-gpios = <&pio 12 GPIO_ACTIVE_LOW>;
bus-width = <4>;
max-frequency = <52000000>;
cap-sd-highspeed;
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_3p3v>;
no-mmc;
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
card@0 {
compatible = "mmc-card";
reg = <0>;
block {
compatible = "block-device";
partitions {
block-partition-env {
partname = "ubootenv";
nvmem-layout {
compatible = "u-boot,env-layout";
};
};
sd_rootfs: block-partition-production {
partname = "production";
};
};
};
};
};
};
fragment@2 {
target-path = "/chosen";
__overlay__ {
rootdisk-sd = <&sd_rootfs>;
};
};
};

99
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-wifi-mt7996a.dtso Normal file
View File

@ -0,0 +1,99 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/dts-v1/;
/plugin/;
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
fragment@0 {
target-path = "/";
__overlay__ {
wifi_12v: regulator-wifi-12v {
compatible = "regulator-fixed";
regulator-name = "wifi";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
gpio = <&pio 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
};
};
fragment@1 {
target = <&i2c_wifi>;
__overlay__ {
// 5G WIFI MAC Address EEPROM
wifi_eeprom@51 {
compatible = "atmel,24c02";
reg = <0x51>;
address-bits = <8>;
page-size = <8>;
size = <256>;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_5g: macaddr@0 {
reg = <0x0 0x6>;
};
};
};
// 6G WIFI MAC Address EEPROM
wifi_eeprom@52 {
compatible = "atmel,24c02";
reg = <0x52>;
address-bits = <8>;
page-size = <8>;
size = <256>;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_6g: macaddr@0 {
reg = <0x0 0x6>;
};
};
};
};
};
fragment@2 {
target = <&pcie0>;
__overlay__ {
pcie@0,0 {
reg = <0x0000 0 0 0 0>;
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
nvmem-cell-names = "mac-address";
nvmem-cells = <&macaddr_5g>;
};
};
};
};
fragment@3 {
target = <&pcie1>;
__overlay__ {
pcie@0,0 {
reg = <0x0000 0 0 0 0>;
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
nvmem-cell-names = "mac-address";
nvmem-cells = <&macaddr_6g>;
};
};
};
};
};

407
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts Normal file
View File

@ -0,0 +1,407 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2022 MediaTek Inc.
* Author: Sam.Shih <sam.shih@mediatek.com>
*/
/dts-v1/;
#include "mt7988a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
/ {
model = "Bananapi BPI-R4";
compatible = "bananapi,bpi-r4",
"mediatek,mt7988";
aliases {
serial0 = &uart0;
led-boot = &led_green;
led-failsafe = &led_green;
led-running = &led_green;
led-upgrade = &led_green;
};
chosen {
stdout-path = &uart0;
bootargs = "console=ttyS0,115200n1 loglevel=8 pci=pcie_bus_perf ubi.block=0,fit root=/dev/fit0";
rootdisk-spim-nand = <&ubi_rootfs>;
};
memory {
reg = <0x00 0x40000000 0x00 0x10000000>;
};
/* SFP1 cage (WAN) */
sfp1: sfp1 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp1>;
los-gpios = <&pio 54 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&pio 82 GPIO_ACTIVE_LOW>;
tx-disable-gpios = <&pio 70 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&pio 69 GPIO_ACTIVE_HIGH>;
rate-select0-gpios = <&pio 21 GPIO_ACTIVE_LOW>;
maximum-power-milliwatt = <3000>;
};
/* SFP2 cage (LAN) */
sfp2: sfp2 {
compatible = "sff,sfp";
i2c-bus = <&i2c_sfp2>;
los-gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&pio 83 GPIO_ACTIVE_LOW>;
tx-disable-gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&pio 1 GPIO_ACTIVE_HIGH>;
rate-select0-gpios = <&pio 3 GPIO_ACTIVE_LOW>;
maximum-power-milliwatt = <3000>;
};
gpio-keys {
compatible = "gpio-keys";
wps {
label = "WPS";
linux,code = <KEY_RESTART>;
gpios = <&pio 14 GPIO_ACTIVE_LOW>;
};
};
gpio-leds {
compatible = "gpio-leds";
led_green: led-green {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&pio 79 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
led_blue: led-blue {
function = LED_FUNCTION_WPS;
color = <LED_COLOR_ID_BLUE>;
gpios = <&pio 63 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
};
&eth {
status = "okay";
};
&gmac0 {
status = "okay";
};
&gmac1 {
sfp = <&sfp2>;
managed = "in-band-status";
phy-mode = "usxgmii";
status = "okay";
};
&gmac2 {
sfp = <&sfp1>;
managed = "in-band-status";
phy-mode = "usxgmii";
status = "okay";
};
&switch {
status = "okay";
};
&gsw_phy0 {
pinctrl-names = "gbe-led";
pinctrl-0 = <&gbe0_led0_pins>;
};
&gsw_port0 {
label = "wan";
};
&gsw_phy0_led0 {
status = "okay";
color = <LED_COLOR_ID_GREEN>;
};
&gsw_phy1 {
pinctrl-names = "gbe-led";
pinctrl-0 = <&gbe1_led0_pins>;
};
&gsw_phy1_led0 {
status = "okay";
color = <LED_COLOR_ID_GREEN>;
};
&gsw_phy2 {
pinctrl-names = "gbe-led";
pinctrl-0 = <&gbe2_led0_pins>;
};
&gsw_phy2_led0 {
status = "okay";
color = <LED_COLOR_ID_GREEN>;
};
&gsw_phy3 {
pinctrl-names = "gbe-led";
pinctrl-0 = <&gbe3_led0_pins>;
};
&gsw_phy3_led0 {
status = "okay";
color = <LED_COLOR_ID_GREEN>;
};
&cpu0 {
proc-supply = <&rt5190_buck3>;
};
&cpu1 {
proc-supply = <&rt5190_buck3>;
};
&cpu2 {
proc-supply = <&rt5190_buck3>;
};
&cpu3 {
proc-supply = <&rt5190_buck3>;
};
&cci {
proc-supply = <&rt5190_buck3>;
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay";
rt5190a_64: rt5190a@64 {
compatible = "richtek,rt5190a";
reg = <0x64>;
vin2-supply = <&rt5190_buck1>;
vin3-supply = <&rt5190_buck1>;
vin4-supply = <&rt5190_buck1>;
regulators {
rt5190_buck1: buck1 {
regulator-name = "rt5190a-buck1";
regulator-min-microvolt = <5090000>;
regulator-max-microvolt = <5090000>;
regulator-allowed-modes =
<RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
regulator-boot-on;
regulator-always-on;
};
buck2 {
regulator-name = "vcore";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1400000>;
regulator-boot-on;
regulator-always-on;
};
rt5190_buck3: buck3 {
regulator-name = "vproc";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1400000>;
regulator-boot-on;
};
buck4 {
regulator-name = "rt5190a-buck4";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-allowed-modes =
<RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
regulator-boot-on;
regulator-always-on;
};
ldo {
regulator-name = "rt5190a-ldo";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-boot-on;
regulator-always-on;
};
};
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_1_pins>;
status = "okay";
pca9545: i2c-switch@70 {
reg = <0x70>;
compatible = "nxp,pca9545";
reset-gpios = <&pio 5 GPIO_ACTIVE_LOW>;
#address-cells = <1>;
#size-cells = <0>;
i2c_rtc: i2c@0 { //eeprom,rtc,ngff
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
address-bits = <8>;
page-size = <8>;
size = <256>;
};
eeprom@57 {
compatible = "atmel,24c02";
reg = <0x57>;
address-bits = <8>;
page-size = <8>;
size = <256>;
};
pcf8563: rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
status = "disabled";
};
};
i2c_sfp1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
i2c_sfp2: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
i2c_wifi: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
};
};
/* mPCIe SIM2 */
&pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&pcie0_pins>;
status = "okay";
};
/* mPCIe SIM3 */
&pcie1 {
pinctrl-names = "default";
pinctrl-0 = <&pcie1_pins>;
status = "okay";
};
/* M.2 key-B SIM1 */
&pcie2 {
pinctrl-names = "default";
pinctrl-0 = <&pcie2_pins>;
status = "okay";
};
/* M.2 key-M SSD */
&pcie3 {
pinctrl-names = "default";
pinctrl-0 = <&pcie3_pins>;
status = "okay";
};
&ssusb1 {
status = "okay";
};
&tphy {
status = "okay";
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_flash_pins>;
status = "okay";
spi_nand: spi_nand@0 {
compatible = "spi-nand";
reg = <0>;
spi-max-frequency = <52000000>;
spi-tx-buswidth = <4>;
spi-rx-buswidth = <4>;
};
};
&spi_nand {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bl2";
reg = <0x0 0x200000>;
read-only;
};
partition@200000 {
label = "ubi";
reg = <0x200000 0x7e00000>;
compatible = "linux,ubi";
volumes {
ubi-volume-ubootenv {
volname = "ubootenv";
nvmem-layout {
compatible = "u-boot,env-redundant-bool-layout";
};
};
ubi-volume-ubootenv2 {
volname = "ubootenv2";
nvmem-layout {
compatible = "u-boot,env-redundant-bool-layout";
};
};
ubi_rootfs: ubi-volume-fit {
volname = "fit";
};
};
};
};
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart1_2_lite_pins>;
};
&uart2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart2_3_pins>;
};
&watchdog {
status = "okay";
};
&xphy {
status = "okay";
};

33
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-emmc.dtso Normal file
View File

@ -0,0 +1,33 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2021 MediaTek Inc.
* Author: Frank Wunderlich <frank-w@public-files.de>
*/
/dts-v1/;
/plugin/;
/ {
compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a";
fragment@0 {
target = <&mmc0>;
__overlay__ {
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&mmc0_pins_emmc_51>;
pinctrl-1 = <&mmc0_pins_emmc_51>;
bus-width = <8>;
max-frequency = <200000000>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
hs400-ds-delay = <0x12814>;
vqmmc-supply = <&reg_1p8v>;
vmmc-supply = <&reg_3p3v>;
non-removable;
no-sd;
no-sdio;
status = "okay";
};
};
};

41
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-aqr.dtso Normal file
View File

@ -0,0 +1,41 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2022 MediaTek Inc.
* Author: Sam.Shih <sam.shih@mediatek.com>
*/
/dts-v1/;
/plugin/;
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a";
fragment@0 {
target = <&mdio_bus>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
/* external Aquantia AQR113C */
phy0: ethernet-phy@0 {
reg = <0>;
compatible = "ethernet-phy-ieee802.3-c45";
reset-gpios = <&pio 72 GPIO_ACTIVE_LOW>;
reset-assert-us = <100000>;
reset-deassert-us = <221000>;
};
};
};
fragment@1 {
target = <&gmac1>;
__overlay__ {
phy-mode = "usxgmii";
phy-connection-type = "usxgmii";
phy = <&phy0>;
status = "okay";
};
};
};

30
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-i2p5g-phy.dtso Normal file
View File

@ -0,0 +1,30 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2022 MediaTek Inc.
* Author: Sam.Shih <sam.shih@mediatek.com>
*/
/dts-v1/;
/plugin/;
/ {
compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a";
fragment@0 {
target = <&gmac1>;
__overlay__ {
phy-mode = "internal";
phy-connection-type = "internal";
phy = <&int_2p5g_phy>;
status = "okay";
};
};
fragment@1 {
target = <&int_2p5g_phy>;
__overlay__ {
pinctrl-names = "i2p5gbe-led";
pinctrl-0 = <&i2p5gbe_led0_pins>;
};
};
};

39
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-mxl.dtso Normal file
View File

@ -0,0 +1,39 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2022 MediaTek Inc.
* Author: Sam.Shih <sam.shih@mediatek.com>
*/
/dts-v1/;
/plugin/;
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a";
fragment@0 {
target = <&mdio_bus>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
/* external Maxlinear GPY211C */
phy13: ethernet-phy@13 {
reg = <13>;
compatible = "ethernet-phy-ieee802.3-c45";
phy-mode = "2500base-x";
};
};
};
fragment@1 {
target = <&gmac1>;
__overlay__ {
phy-mode = "2500base-x";
phy-connection-type = "2500base-x";
phy = <&phy13>;
status = "okay";
};
};
};

47
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-sfp.dtso Normal file
View File

@ -0,0 +1,47 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2022 MediaTek Inc.
* Author: Sam.Shih <sam.shih@mediatek.com>
*/
/dts-v1/;
/plugin/;
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a";
fragment@0 {
target = <&i2c2>;
__overlay__ {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_0_pins>;
status = "okay";
};
};
fragment@1 {
target-path = "/";
__overlay__ {
sfp_esp1: sfp@1 {
compatible = "sff,sfp";
i2c-bus = <&i2c2>;
mod-def0-gpios = <&pio 82 GPIO_ACTIVE_LOW>;
los-gpios = <&pio 81 GPIO_ACTIVE_HIGH>;
tx-disable-gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <3000>;
};
};
};
fragment@2 {
target = <&gmac1>;
__overlay__ {
phy-mode = "10gbase-r";
managed = "in-band-status";
sfp = <&sfp_esp1>;
status = "okay";
};
};
};

41
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-aqr.dtso Normal file
View File

@ -0,0 +1,41 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2022 MediaTek Inc.
* Author: Sam.Shih <sam.shih@mediatek.com>
*/
/dts-v1/;
/plugin/;
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a";
fragment@0 {
target = <&mdio_bus>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
/* external Aquantia AQR113C */
phy8: ethernet-phy@8 {
reg = <8>;
compatible = "ethernet-phy-ieee802.3-c45";
reset-gpios = <&pio 71 GPIO_ACTIVE_LOW>;
reset-assert-us = <100000>;
reset-deassert-us = <221000>;
};
};
};
fragment@1 {
target = <&gmac2>;
__overlay__ {
phy-mode = "usxgmii";
phy-connection-type = "usxgmii";
phy = <&phy8>;
status = "okay";
};
};
};

39
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-mxl.dtso Normal file
View File

@ -0,0 +1,39 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2022 MediaTek Inc.
* Author: Sam.Shih <sam.shih@mediatek.com>
*/
/dts-v1/;
/plugin/;
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a";
fragment@0 {
target = <&mdio_bus>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
/* external Maxlinear GPY211C */
phy5: ethernet-phy@5 {
reg = <5>;
compatible = "ethernet-phy-ieee802.3-c45";
phy-mode = "2500base-x";
};
};
};
fragment@1 {
target = <&gmac2>;
__overlay__ {
phy-mode = "2500base-x";
phy-connection-type = "2500base-x";
phy = <&phy5>;
status = "okay";
};
};
};

47
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-sfp.dtso Normal file
View File

@ -0,0 +1,47 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2022 MediaTek Inc.
* Author: Sam.Shih <sam.shih@mediatek.com>
*/
/dts-v1/;
/plugin/;
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a";
fragment@0 {
target = <&i2c1>;
__overlay__ {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_sfp_pins>;
status = "okay";
};
};
fragment@1 {
target-path = "/";
__overlay__ {
sfp_esp0: sfp@0 {
compatible = "sff,sfp";
i2c-bus = <&i2c1>;
mod-def0-gpios = <&pio 35 GPIO_ACTIVE_LOW>;
los-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
tx-disable-gpios = <&pio 29 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <3000>;
};
};
};
fragment@2 {
target = <&gmac2>;
__overlay__ {
phy-mode = "10gbase-r";
managed = "in-band-status";
sfp = <&sfp_esp0>;
status = "okay";
};
};
};

31
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-sd.dtso Normal file
View File

@ -0,0 +1,31 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2023 MediaTek Inc.
* Author: Frank Wunderlich <frank-w@public-files.de>
*/
/dts-v1/;
/plugin/;
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a";
fragment@1 {
target-path = <&mmc0>;
__overlay__ {
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&mmc0_pins_sdcard>;
pinctrl-1 = <&mmc0_pins_sdcard>;
cd-gpios = <&pio 69 GPIO_ACTIVE_LOW>;
bus-width = <4>;
max-frequency = <52000000>;
cap-sd-highspeed;
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_3p3v>;
no-mmc;
status = "okay";
};
};
};

69
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-snfi-nand.dtso Normal file
View File

@ -0,0 +1,69 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2022 MediaTek Inc.
* Author: Sam.Shih <sam.shih@mediatek.com>
*/
/dts-v1/;
/plugin/;
/ {
compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a";
fragment@0 {
target = <&snand>;
__overlay__ {
status = "okay";
flash@0 {
compatible = "spi-nand";
reg = <0>;
spi-max-frequency = <52000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
mediatek,nmbm;
mediatek,bmt-max-ratio = <1>;
mediatek,bmt-max-reserved-blocks = <64>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "BL2";
reg = <0x00000 0x0100000>;
read-only;
};
partition@100000 {
label = "u-boot-env";
reg = <0x0100000 0x0080000>;
};
partition@180000 {
label = "Factory";
reg = <0x180000 0x0400000>;
};
partition@580000 {
label = "FIP";
reg = <0x580000 0x0200000>;
};
partition@780000 {
label = "ubi";
reg = <0x780000 0x7080000>;
};
};
};
};
};
fragment@1 {
target = <&bch>;
__overlay__ {
status = "okay";
};
};
};

64
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-spim-nand.dtso Normal file
View File

@ -0,0 +1,64 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2022 MediaTek Inc.
* Author: Sam.Shih <sam.shih@mediatek.com>
*/
/dts-v1/;
/plugin/;
/ {
compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a";
fragment@0 {
target = <&spi0>;
__overlay__ {
pinctrl-names = "default";
pinctrl-0 = <&spi0_flash_pins>;
status = "okay";
flash@0 {
compatible = "spi-nand";
reg = <0>;
spi-max-frequency = <52000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
mediatek,nmbm;
mediatek,bmt-max-ratio = <1>;
mediatek,bmt-max-reserved-blocks = <64>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "BL2";
reg = <0x00000 0x0100000>;
read-only;
};
partition@100000 {
label = "u-boot-env";
reg = <0x0100000 0x0080000>;
};
partition@180000 {
label = "Factory";
reg = <0x180000 0x0400000>;
};
partition@580000 {
label = "FIP";
reg = <0x580000 0x0200000>;
};
partition@780000 {
label = "ubi";
reg = <0x780000 0x7080000>;
};
};
};
};
};
};

59
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-spim-nor.dtso Normal file
View File

@ -0,0 +1,59 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2022 MediaTek Inc.
* Author: Sam.Shih <sam.shih@mediatek.com>
*/
/dts-v1/;
/plugin/;
/ {
compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a";
fragment@0 {
target = <&spi2>;
__overlay__ {
pinctrl-names = "default";
pinctrl-0 = <&spi2_flash_pins>;
status = "okay";
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-cal-enable;
spi-cal-mode = "read-data";
spi-cal-datalen = <7>;
spi-cal-data = /bits/ 8 <
0x53 0x46 0x5F 0x42 0x4F 0x4F 0x54>; /* SF_BOOT */
spi-cal-addrlen = <1>;
spi-cal-addr = /bits/ 32 <0x0>;
reg = <0>;
spi-max-frequency = <52000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
partition@00000 {
label = "BL2";
reg = <0x00000 0x0040000>;
};
partition@40000 {
label = "u-boot-env";
reg = <0x40000 0x0010000>;
};
partition@50000 {
label = "Factory";
reg = <0x50000 0x0200000>;
};
partition@250000 {
label = "FIP";
reg = <0x250000 0x0080000>;
};
partition@2D0000 {
label = "firmware";
reg = <0x2D0000 0x1D30000>;
};
};
};
};
};

200
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb.dts Normal file
View File

@ -0,0 +1,200 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2022 MediaTek Inc.
* Author: Sam.Shih <sam.shih@mediatek.com>
*/
/dts-v1/;
#include "mt7988a.dtsi"
#include <dt-bindings/pinctrl/mt65xx.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
/ {
model = "MediaTek MT7988A Reference Board";
compatible = "mediatek,mt7988a-rfb",
"mediatek,mt7988";
chosen {
bootargs = "console=ttyS0,115200n1 loglevel=8 \
earlycon=uart8250,mmio32,0x11000000 \
pci=pcie_bus_perf";
};
memory {
reg = <0 0x40000000 0 0x40000000>;
};
};
&eth {
pinctrl-0 = <&mdio0_pins>;
pinctrl-names = "default";
};
&gmac0 {
status = "okay";
};
&cpu0 {
proc-supply = <&rt5190_buck3>;
};
&cpu1 {
proc-supply = <&rt5190_buck3>;
};
&cpu2 {
proc-supply = <&rt5190_buck3>;
};
&cpu3 {
proc-supply = <&rt5190_buck3>;
};
&cci {
proc-supply = <&rt5190_buck3>;
};
&eth {
status = "okay";
};
&switch {
status = "okay";
};
&gsw_phy0 {
pinctrl-names = "gbe-led";
pinctrl-0 = <&gbe0_led0_pins>;
};
&gsw_phy0_led0 {
status = "okay";
color = <LED_COLOR_ID_GREEN>;
};
&gsw_phy1 {
pinctrl-names = "gbe-led";
pinctrl-0 = <&gbe1_led0_pins>;
};
&gsw_phy1_led0 {
status = "okay";
color = <LED_COLOR_ID_GREEN>;
};
&gsw_phy2 {
pinctrl-names = "gbe-led";
pinctrl-0 = <&gbe2_led0_pins>;
};
&gsw_phy2_led0 {
status = "okay";
color = <LED_COLOR_ID_GREEN>;
};
&gsw_phy3 {
pinctrl-names = "gbe-led";
pinctrl-0 = <&gbe3_led0_pins>;
};
&gsw_phy3_led0 {
status = "okay";
color = <LED_COLOR_ID_GREEN>;
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay";
rt5190a_64: rt5190a@64 {
compatible = "richtek,rt5190a";
reg = <0x64>;
/*interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;*/
vin2-supply = <&rt5190_buck1>;
vin3-supply = <&rt5190_buck1>;
vin4-supply = <&rt5190_buck1>;
regulators {
rt5190_buck1: buck1 {
regulator-name = "rt5190a-buck1";
regulator-min-microvolt = <5090000>;
regulator-max-microvolt = <5090000>;
regulator-allowed-modes =
<RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
regulator-boot-on;
regulator-always-on;
};
buck2 {
regulator-name = "vcore";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1400000>;
regulator-boot-on;
regulator-always-on;
};
rt5190_buck3: buck3 {
regulator-name = "vproc";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1400000>;
regulator-boot-on;
};
buck4 {
regulator-name = "rt5190a-buck4";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-allowed-modes =
<RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
regulator-boot-on;
regulator-always-on;
};
ldo {
regulator-name = "rt5190a-ldo";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-boot-on;
regulator-always-on;
};
};
};
};
&pcie0 {
status = "okay";
};
&pcie1 {
status = "okay";
};
&pcie2 {
status = "disabled";
};
&pcie3 {
status = "okay";
};
&ssusb0 {
status = "okay";
};
&ssusb1 {
status = "okay";
};
&tphy {
status = "okay";
};
&uart0 {
status = "okay";
};
&watchdog {
status = "okay";
};
&xphy {
status = "okay";
};

1569
target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a.dtsi Normal file
View File

File diff suppressed because it is too large Load Diff

316
target/linux/mediatek/files-6.6/drivers/net/phy/mediatek-2p5ge.c Normal file
View File

@ -0,0 +1,316 @@
// SPDX-License-Identifier: GPL-2.0+
#include <linux/bitfield.h>
#include <linux/firmware.h>
#include <linux/module.h>
#include <linux/nvmem-consumer.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/pinctrl/consumer.h>
#include <linux/phy.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
#define MT7988_2P5GE_PMB "mediatek/mt7988/i2p5ge-phy-pmb.bin"
#define MD32_EN BIT(0)
#define PMEM_PRIORITY BIT(8)
#define DMEM_PRIORITY BIT(16)
#define BASE100T_STATUS_EXTEND 0x10
#define BASE1000T_STATUS_EXTEND 0x11
#define EXTEND_CTRL_AND_STATUS 0x16
#define PHY_AUX_CTRL_STATUS 0x1d
#define PHY_AUX_DPX_MASK GENMASK(5, 5)
#define PHY_AUX_SPEED_MASK GENMASK(4, 2)
/* Registers on MDIO_MMD_VEND1 */
#define MTK_PHY_LINK_STATUS_MISC 0xa2
#define MTK_PHY_FDX_ENABLE BIT(5)
#define MTK_PHY_LPI_PCS_DSP_CTRL 0x121
#define MTK_PHY_LPI_SIG_EN_LO_THRESH100_MASK GENMASK(12, 8)
/* Registers on MDIO_MMD_VEND2 */
#define MTK_PHY_LED0_ON_CTRL 0x24
#define MTK_PHY_LED0_ON_LINK1000 BIT(0)
#define MTK_PHY_LED0_ON_LINK100 BIT(1)
#define MTK_PHY_LED0_ON_LINK10 BIT(2)
#define MTK_PHY_LED0_ON_LINK2500 BIT(7)
#define MTK_PHY_LED0_POLARITY BIT(14)
#define MTK_PHY_LED1_ON_CTRL 0x26
#define MTK_PHY_LED1_ON_FDX BIT(4)
#define MTK_PHY_LED1_ON_HDX BIT(5)
#define MTK_PHY_LED1_POLARITY BIT(14)
#define MTK_EXT_PAGE_ACCESS 0x1f
#define MTK_PHY_PAGE_STANDARD 0x0000
#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
struct mtk_i2p5ge_phy_priv {
bool fw_loaded;
};
enum {
PHY_AUX_SPD_10 = 0,
PHY_AUX_SPD_100,
PHY_AUX_SPD_1000,
PHY_AUX_SPD_2500,
};
static int mtk_2p5ge_phy_read_page(struct phy_device *phydev)
{
return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
}
static int mtk_2p5ge_phy_write_page(struct phy_device *phydev, int page)
{
return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
}
static int mt7988_2p5ge_phy_probe(struct phy_device *phydev)
{
struct mtk_i2p5ge_phy_priv *phy_priv;
phy_priv = devm_kzalloc(&phydev->mdio.dev,
sizeof(struct mtk_i2p5ge_phy_priv), GFP_KERNEL);
if (!phy_priv)
return -ENOMEM;
phydev->priv = phy_priv;
return 0;
}
static int mt7988_2p5ge_phy_config_init(struct phy_device *phydev)
{
int ret, i;
const struct firmware *fw;
struct device *dev = &phydev->mdio.dev;
struct device_node *np;
void __iomem *pmb_addr;
void __iomem *md32_en_cfg_base;
struct mtk_i2p5ge_phy_priv *phy_priv = phydev->priv;
u16 reg;
struct pinctrl *pinctrl;
if (!phy_priv->fw_loaded) {
np = of_find_compatible_node(NULL, NULL, "mediatek,2p5gphy-fw");
if (!np)
return -ENOENT;
pmb_addr = of_iomap(np, 0);
if (!pmb_addr)
return -ENOMEM;
md32_en_cfg_base = of_iomap(np, 1);
if (!md32_en_cfg_base)
return -ENOMEM;
ret = request_firmware(&fw, MT7988_2P5GE_PMB, dev);
if (ret) {
dev_err(dev, "failed to load firmware: %s, ret: %d\n",
MT7988_2P5GE_PMB, ret);
return ret;
}
reg = readw(md32_en_cfg_base);
if (reg & MD32_EN) {
phy_set_bits(phydev, 0, BIT(15));
usleep_range(10000, 11000);
}
phy_set_bits(phydev, 0, BIT(11));
/* Write magic number to safely stall MCU */
phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x800e, 0x1100);
phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x800f, 0x00df);
for (i = 0; i < fw->size - 1; i += 4)
writel(*((uint32_t *)(fw->data + i)), pmb_addr + i);
release_firmware(fw);
writew(reg & ~MD32_EN, md32_en_cfg_base);
writew(reg | MD32_EN, md32_en_cfg_base);
phy_set_bits(phydev, 0, BIT(15));
dev_info(dev, "Firmware loading/trigger ok.\n");
phy_priv->fw_loaded = true;
}
/* Setup LED */
phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL,
MTK_PHY_LED0_ON_LINK10 |
MTK_PHY_LED0_ON_LINK100 |
MTK_PHY_LED0_ON_LINK1000 |
MTK_PHY_LED0_ON_LINK2500);
phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED1_ON_CTRL,
MTK_PHY_LED1_ON_FDX | MTK_PHY_LED1_ON_HDX);
pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "i2p5gbe-led");
if (IS_ERR(pinctrl)) {
dev_err(&phydev->mdio.dev, "Fail to set LED pins!\n");
return PTR_ERR(pinctrl);
}
phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LPI_PCS_DSP_CTRL,
MTK_PHY_LPI_SIG_EN_LO_THRESH100_MASK, 0);
/* Enable 16-bit next page exchange bit if 1000-BT isn't advertizing */
phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
__phy_write(phydev, 0x11, 0xfbfa);
__phy_write(phydev, 0x12, 0xc3);
__phy_write(phydev, 0x10, 0x87f8);
phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
return 0;
}
static int mt7988_2p5ge_phy_config_aneg(struct phy_device *phydev)
{
bool changed = false;
u32 adv;
int ret;
if (phydev->autoneg == AUTONEG_DISABLE) {
/* Configure half duplex with genphy_setup_forced,
* because genphy_c45_pma_setup_forced does not support.
*/
return phydev->duplex != DUPLEX_FULL
? genphy_setup_forced(phydev)
: genphy_c45_pma_setup_forced(phydev);
}
ret = genphy_c45_an_config_aneg(phydev);
if (ret < 0)
return ret;
if (ret > 0)
changed = true;
adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
ret = phy_modify_changed(phydev, MII_CTRL1000,
ADVERTISE_1000FULL | ADVERTISE_1000HALF,
adv);
if (ret < 0)
return ret;
if (ret > 0)
changed = true;
return genphy_c45_check_and_restart_aneg(phydev, changed);
}
static int mt7988_2p5ge_phy_get_features(struct phy_device *phydev)
{
int ret;
ret = genphy_read_abilities(phydev);
if (ret)
return ret;
/* We don't support HDX at MAC layer on mt7988.
* So mask phy's HDX capabilities, too.
*/
linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
phydev->supported);
linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
phydev->supported);
linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
phydev->supported);
linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
phydev->supported);
linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
return 0;
}
static int mt7988_2p5ge_phy_read_status(struct phy_device *phydev)
{
int ret;
ret = genphy_update_link(phydev);
if (ret)
return ret;
phydev->speed = SPEED_UNKNOWN;
phydev->duplex = DUPLEX_UNKNOWN;
phydev->pause = 0;
phydev->asym_pause = 0;
if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
ret = genphy_c45_read_lpa(phydev);
if (ret < 0)
return ret;
/* Read the link partner's 1G advertisement */
ret = phy_read(phydev, MII_STAT1000);
if (ret < 0)
return ret;
mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, ret);
} else if (phydev->autoneg == AUTONEG_DISABLE) {
linkmode_zero(phydev->lp_advertising);
}
ret = phy_read(phydev, PHY_AUX_CTRL_STATUS);
if (ret < 0)
return ret;
switch (FIELD_GET(PHY_AUX_SPEED_MASK, ret)) {
case PHY_AUX_SPD_10:
phydev->speed = SPEED_10;
break;
case PHY_AUX_SPD_100:
phydev->speed = SPEED_100;
break;
case PHY_AUX_SPD_1000:
phydev->speed = SPEED_1000;
break;
case PHY_AUX_SPD_2500:
phydev->speed = SPEED_2500;
break;
}
ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LINK_STATUS_MISC);
if (ret < 0)
return ret;
phydev->duplex = (ret & MTK_PHY_FDX_ENABLE) ? DUPLEX_FULL : DUPLEX_HALF;
/* FIXME: The current firmware always enables rate adaptation mode. */
phydev->rate_matching = RATE_MATCH_PAUSE;
return 0;
}
static int mt7988_2p5ge_phy_get_rate_matching(struct phy_device *phydev,
phy_interface_t iface)
{
return RATE_MATCH_PAUSE;
}
static struct phy_driver mtk_gephy_driver[] = {
{
PHY_ID_MATCH_MODEL(0x00339c11),
.name = "MediaTek MT798x 2.5GbE PHY",
.probe = mt7988_2p5ge_phy_probe,
.config_init = mt7988_2p5ge_phy_config_init,
.config_aneg = mt7988_2p5ge_phy_config_aneg,
.get_features = mt7988_2p5ge_phy_get_features,
.read_status = mt7988_2p5ge_phy_read_status,
.get_rate_matching = mt7988_2p5ge_phy_get_rate_matching,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = mtk_2p5ge_phy_read_page,
.write_page = mtk_2p5ge_phy_write_page,
},
};
module_phy_driver(mtk_gephy_driver);
static struct mdio_device_id __maybe_unused mtk_2p5ge_phy_tbl[] = {
{ PHY_ID_MATCH_VENDOR(0x00339c00) },
{ }
};
MODULE_DESCRIPTION("MediaTek 2.5Gb Ethernet PHY driver");
MODULE_AUTHOR("SkyLake Huang <SkyLake.Huang@mediatek.com>");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(mdio, mtk_2p5ge_phy_tbl);
MODULE_FIRMWARE(MT7988_2P5GE_PMB);

1517
target/linux/mediatek/files-6.6/drivers/pinctrl/mediatek/pinctrl-mt7988.c Normal file
View File

File diff suppressed because it is too large Load Diff