mirror of
https://github.com/openwrt/openwrt.git
synced 2025-03-03 04:49:34 +00:00
ath79: add support for TP-Link Archer C2 V3 (AC900)
This commit adds support for the TP-link Archer C2 V3 (AC900). Specifications: - CPU: QCA9563 750Mhz - Ram: 64MB (DDR2) - Flash: 8MB (SPI NOR) - Ethernet: 5x 10/100/1000 - Wifi: QCA9563 bgn + QCA9887 an+ac - 9x Leds, 2x buttons Flash instructions: Upload openwrt-ath79-generic-tplink_archer-c2-v3-squashfs-factory.bin via the router Web interface and flash as normal firmware update. Signed-off-by: Skirmantas Lauzikas <skirmantas.lauzikas@blackraven.lt> [reorder entries, fix trailing whitespace in dts, add firmware partition compatible string, remove led default off states, use default on state for system led, reuse tplink-safeloader-uimage image build recipe, squash with dynamic partitioning commit, reword commit message, add installation instructions] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
This commit is contained in:
Skirmantas Lauzikas
Jo-Philipp Wich
parent
30f48fb107
commit
9c01273e5e
@ -81,6 +81,14 @@ tplink,archer-c7-v5)
|
||||
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
|
||||
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x20"
|
||||
;;
|
||||
tplink,archer-c2-v3|\
|
||||
tplink,tl-wr1043nd-v4)
|
||||
ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20"
|
||||
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
|
||||
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
|
||||
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
|
||||
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
|
||||
;;
|
||||
tplink,archer-c58-v1|\
|
||||
tplink,archer-c59-v1)
|
||||
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E"
|
||||
@ -98,13 +106,6 @@ tplink,tl-mr3020-v1|\
|
||||
tplink,tl-mr3040-v2)
|
||||
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
|
||||
;;
|
||||
tplink,tl-wr1043nd-v4)
|
||||
ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20"
|
||||
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
|
||||
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
|
||||
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
|
||||
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
|
||||
;;
|
||||
tplink,tl-wr740n-v1|\
|
||||
tplink,tl-wr740n-v3|\
|
||||
tplink,tl-wr741-v1|\
|
||||
|
||||
@ -74,6 +74,7 @@ ath79_setup_interfaces()
|
||||
dlink,dir-825-c1|\
|
||||
dlink,dir-835-a1|\
|
||||
dlink,dir-859-a1|\
|
||||
tplink,archer-c2-v3|\
|
||||
tplink,tl-wr1043nd-v4)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
|
||||
|
||||
@ -126,6 +126,10 @@ case "$FIRMWARE" in
|
||||
ath10kcal_extract "ART" 20480 2116
|
||||
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
|
||||
;;
|
||||
tplink,archer-c2-v3)
|
||||
ath10kcal_extract "ART" 20480 2116
|
||||
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
|
||||
;;
|
||||
tplink,archer-c7-v2)
|
||||
ath10kcal_extract "art" 20480 2116
|
||||
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1)
|
||||
|
||||
185
target/linux/ath79/dts/qca9563_tplink_archer-c2-v3.dts
Normal file
185
target/linux/ath79/dts/qca9563_tplink_archer-c2-v3.dts
Normal file
@ -0,0 +1,185 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "qca956x.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "tplink,archer-c2-v3", "qca,qca9563";
|
||||
model = "TP-Link Archer C2 Version 3";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8";
|
||||
};
|
||||
|
||||
aliases {
|
||||
led-boot = &system;
|
||||
led-failsafe = &system;
|
||||
led-running = &system;
|
||||
led-upgrade = &system;
|
||||
};
|
||||
|
||||
gpio_leds: leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
system: system {
|
||||
label = "tp-link:green:system";
|
||||
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
wifi2g {
|
||||
label = "tp-link:green:wifi2g";
|
||||
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
|
||||
wifi5g {
|
||||
label = "tp-link:green:wifi5g";
|
||||
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
wifi_wps {
|
||||
label = "tp-link:green:wps";
|
||||
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "tp-link:green:wan";
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wan_fail {
|
||||
label = "tp-link:orange:wan";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan1 {
|
||||
label = "tp-link:green:lan1";
|
||||
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan2 {
|
||||
label = "tp-link:green:lan2";
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan3 {
|
||||
label = "tp-link:green:lan3";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan4 {
|
||||
label = "tp-link:green:lan4";
|
||||
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "Reset button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "WPS button";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "factory-uboot";
|
||||
reg = <0x000000 0x020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
label = "uboot";
|
||||
reg = <0x020000 0x10000>;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "firmware";
|
||||
reg = <0x030000 0x7A0000>;
|
||||
compatible = "denx,uimage";
|
||||
};
|
||||
|
||||
info: partition@7e0000 {
|
||||
label = "product-info";
|
||||
reg = <0x7e0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
art: partition@7f0000 {
|
||||
label = "ART";
|
||||
reg = <0x7f0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
|
||||
phy-mask = <0>;
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
phy-mode = "sgmii";
|
||||
|
||||
qca,ar8327-initvals = <
|
||||
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
|
||||
0x7c 0x0000007e /* PORT0_STATUS */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
|
||||
mtd-mac-address = <&info 0x8>;
|
||||
phy-mode = "sgmii";
|
||||
phy-handle = <&phy0>;
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
mtd-cal-data = <&art 0x1000>;
|
||||
mtd-mac-address = <&info 0x8>;
|
||||
};
|
||||
@ -12,6 +12,16 @@ define Device/tplink_archer-a7-v5
|
||||
endef
|
||||
TARGET_DEVICES += tplink_archer-a7-v5
|
||||
|
||||
define Device/tplink_archer-c2-v3
|
||||
$(Device/tplink-safeloader-uimage)
|
||||
ATH_SOC := qca9563
|
||||
IMAGE_SIZE := 7808k
|
||||
DEVICE_TITLE := TP-LINK Archer C2 v3
|
||||
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
|
||||
TPLINK_BOARD_ID := ARCHER-C2-V3
|
||||
endef
|
||||
TARGET_DEVICES += tplink_archer-c2-v3
|
||||
|
||||
define Device/tplink_archer-c58-v1
|
||||
$(Device/tplink-safeloader-uimage)
|
||||
ATH_SOC := qca9561
|
||||
|
||||
@ -397,6 +397,44 @@ static struct device_info boards[] = {
|
||||
.last_sysupgrade_partition = "file-system",
|
||||
},
|
||||
|
||||
/** Firmware layout for the C2v3 */
|
||||
{
|
||||
.id = "ARCHER-C2-V3",
|
||||
.support_list =
|
||||
"SupportList:\n"
|
||||
"{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n"
|
||||
"{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n"
|
||||
"{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n",
|
||||
.support_trail = '\x00',
|
||||
.soft_ver = "soft_ver:3.0.1\n",
|
||||
|
||||
/** We're using a dynamic kernel/rootfs split here */
|
||||
|
||||
.partitions = {
|
||||
{"factory-boot", 0x00000, 0x20000},
|
||||
{"fs-uboot", 0x20000, 0x10000},
|
||||
{"firmware", 0x30000, 0x7a0000},
|
||||
{"user-config", 0x7d0000, 0x04000},
|
||||
{"default-mac", 0x7e0000, 0x00100},
|
||||
{"device-id", 0x7e0100, 0x00100},
|
||||
{"extra-para", 0x7e0200, 0x00100},
|
||||
{"pin", 0x7e0300, 0x00100},
|
||||
{"support-list", 0x7e0400, 0x00400},
|
||||
{"soft-version", 0x7e0800, 0x00400},
|
||||
{"product-info", 0x7e0c00, 0x01400},
|
||||
{"partition-table", 0x7e2000, 0x01000},
|
||||
{"profile", 0x7e3000, 0x01000},
|
||||
{"default-config", 0x7e4000, 0x04000},
|
||||
{"merge-config", 0x7ec000, 0x02000},
|
||||
{"qos-db", 0x7ee000, 0x02000},
|
||||
{"radio", 0x7f0000, 0x10000},
|
||||
{NULL, 0, 0}
|
||||
},
|
||||
|
||||
.first_sysupgrade_partition = "os-image",
|
||||
.last_sysupgrade_partition = "file-system",
|
||||
},
|
||||
|
||||
/** Firmware layout for the C25v1 */
|
||||
{
|
||||
.id = "ARCHER-C25-V1",
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user