mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 00:11:13 +00:00
mediatek: add support for Mercusys MR80X v3
This commit adds support for Mercusys MR80X(EU) v3 router.
Device specification:
- SoC: Mediatek MT7981b, Cortex-A53, 64-bit
- RAM: 512MB
- Flash: SPI NAND GigaDevice GD5F1GQ5UEYIGY (128 MB)
- Ethernet: 4x 100/1000 Mbps LAN1,LAN2,LAN3 & WAN
- Wireless: 2.4GHz (802.11 b/g/n/ax)
- Wireless: 5GHz (802.11 a/n/ac/ax)
- LEDs: 1 orange and 1 green status LEDs, 4 green gpio-controlled LEDs
on ethernet ports
- Buttons: 1 (Reset)
- Bootloader: Main U-Boot - U-Boot 2022.01-rc4. Additionally, both UBI
slots contain "seconduboot" (also U-Boot 2022.01-rc4)
Installation (UART):
- Place OpenWrt sysupgrade image on tftp server with IP 192.168.1.2
- Attach UART, switch on the router and interrupt the boot process by
pressing 'Ctrl-C'.
- Upload the sysupgrade.bin via tftp.
setenv serverip 192.168.1.2; setenv ipaddr 192.168.1.1; tftp
0x40001000 sysupgrade.bin
- Erase "ubi0" part, and write the image.
nand erase.spread 0x300000 0x3200000; nand write.spread 0x40001000
0x300000 0x3200000
- Set the uboot environment for startup.
setenv tp_boot_idx 0; setenv bootcmd bootm 0x46000000; saveenv
- Reboot the router by reconnecting the power.
Recovery:
- Press Reset button and power on the router.
- Navigate to U-Boot recovery web server (http://192.168.1.1/) and
upload the OEM firmware.
Stock layout:
0x000000000000-0x000000200000 : "boot"
0x000000200000-0x000000300000 : "u-boot-env"
0x000000300000-0x000003500000 : "ubi0"
0x000003500000-0x000006700000 : "ubi1"
0x000006700000-0x000006f00000 : "userconfig"
0x000006f00000-0x000007300000 : "tp_data"
ubi0/ubi1 format:
U-Boot at boot checks that all volumes are in place:
+-------------------------------+
| Volume Name: uboot Vol ID: 0|
| Volume Name: kernel Vol ID: 1|
| Volume Name: rootfs Vol ID: 2|
+-------------------------------+
MAC addresses:
+---------+-------------------+-----------+
| | MAC | Algorithm |
+---------+-------------------+-----------+
| label | 94:0C:xx:xx:xx:12 | label |
| WLAN 2g | 94:0C:xx:xx:xx:11 | label-1 |
| WLAN 5g | 94:0C:xx:xx:xx:10 | label-2 |
+---------+-------------------+-----------+
label MAC address was found in UBI partition "tp_data", file
"default-mac".
Signed-off-by: zib zic <zibzicoooo@protonmail.com>
This commit is contained in:
zib zic
parent
b4cc5743d9
commit
9be1fce0ce
350
target/linux/mediatek/dts/mt7981b-mercusys-mr80x-v3.dts
Normal file
350
target/linux/mediatek/dts/mt7981b-mercusys-mr80x-v3.dts
Normal file
@ -0,0 +1,350 @@
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
#include "mt7981.dtsi"
|
||||
/ {
|
||||
model = "MediaTek MT7981 RFB";
|
||||
compatible = "mercusys,mr80x-v3";
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n1 loglevel=8 \
|
||||
earlycon=uart8250,mmio32,0x11002000 \
|
||||
init=/etc/preinit";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0 0x40000000 0 0x10000000>;
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <100>;
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
||||
linux,input-type = <1>;
|
||||
};
|
||||
};
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
orange {
|
||||
label = "orange";
|
||||
default-state = "on";
|
||||
gpios = <&pio 4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
green {
|
||||
label = "green";
|
||||
default-state = "off";
|
||||
gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
wan {
|
||||
label = "wan";
|
||||
default-state = "off";
|
||||
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
lan1 {
|
||||
label = "lan1";
|
||||
default-state = "off";
|
||||
gpios = <&pio 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
lan2 {
|
||||
label = "lan2";
|
||||
default-state = "off";
|
||||
gpios = <&pio 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
lan3 {
|
||||
label = "lan3";
|
||||
default-state = "off";
|
||||
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
sound_wm8960 {
|
||||
compatible = "mediatek,mt79xx-wm8960-machine";
|
||||
mediatek,platform = <&afe>;
|
||||
audio-routing = "Headphone", "HP_L",
|
||||
"Headphone", "HP_R",
|
||||
"LINPUT1", "AMIC",
|
||||
"RINPUT1", "AMIC";
|
||||
mediatek,audio-codec = <&wm8960>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sound_si3218x {
|
||||
compatible = "mediatek,mt79xx-si3218x-machine";
|
||||
mediatek,platform = <&afe>;
|
||||
mediatek,ext-codec = <&proslic_spi>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
&afe {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcm_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c_pins>;
|
||||
status = "disabled";
|
||||
|
||||
wm8960: wm8960@1a {
|
||||
compatible = "wlf,wm8960";
|
||||
reg = <0x1a>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-mode = "gmii";
|
||||
nick-index = <4>;
|
||||
phy-handle = <&phy0>;
|
||||
phy-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
mdio: mdio-bus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
phy5: phy@5 {
|
||||
compatible = "ethernet-phy-id67c9.de0a";
|
||||
reg = <5>;
|
||||
reset-gpios = <&pio 14 1>;
|
||||
reset-assert-us = <600>;
|
||||
reset-deassert-us = <20000>;
|
||||
phy-mode = "2500base-x";
|
||||
partner_gmac = <0>;
|
||||
};
|
||||
|
||||
phy6: phy@6 {
|
||||
compatible = "ethernet-phy-id67c9.de0a";
|
||||
reg = <6>;
|
||||
phy-mode = "2500base-x";
|
||||
partner_gmac = <1>;
|
||||
};
|
||||
phy0: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-id03a2.9461";
|
||||
reg = <0>;
|
||||
phy-mode = "gmii";
|
||||
nvmem-cells = <&phy_calibration>;
|
||||
nvmem-cell-names = "phy-cal-data";
|
||||
};
|
||||
switch@0 {
|
||||
compatible = "mediatek,mt7531";
|
||||
reg = <31>;
|
||||
reset-gpios = <&pio 39 0>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@6 {
|
||||
reg = <6>;
|
||||
label = "cpu";
|
||||
ethernet = <&gmac0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_flash_pins>;
|
||||
status = "okay";
|
||||
spi_nand: spi_nand@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spi-nand";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <52000000>;
|
||||
spi-tx-buswidth = <4>;
|
||||
spi-rx-buswidth = <4>;
|
||||
|
||||
|
||||
partition@0 {
|
||||
label = "boot";
|
||||
reg = <0x00000 0x0200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x0200000 0x0100000>;
|
||||
};
|
||||
|
||||
partition@300000 {
|
||||
label = "ubi0";
|
||||
reg = <0x300000 0x3200000>;
|
||||
};
|
||||
|
||||
partition@3500000 {
|
||||
label = "ubi1";
|
||||
reg = <0x3500000 0x3200000>;
|
||||
};
|
||||
|
||||
partition@6700000 {
|
||||
label = "userconfig";
|
||||
reg = <0x6700000 0x800000>;
|
||||
};
|
||||
|
||||
factory:partition@6f00000 {
|
||||
label = "tp_data";
|
||||
reg = <0x6f00000 0x800000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spic_pins>;
|
||||
status = "okay";
|
||||
|
||||
proslic_spi: proslic_spi@0 {
|
||||
compatible = "silabs,proslic_spi";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
spi-cpha = <1>;
|
||||
spi-cpol = <1>;
|
||||
channel_count = <1>;
|
||||
debug_level = <4>;
|
||||
reset_gpio = <&pio 15 0>;
|
||||
ig,enable-spi = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&pio {
|
||||
|
||||
i2c_pins: i2c-pins-g0 {
|
||||
mux {
|
||||
function = "i2c";
|
||||
groups = "i2c0_0";
|
||||
};
|
||||
};
|
||||
|
||||
pcm_pins: pcm-pins-g0 {
|
||||
mux {
|
||||
function = "pcm";
|
||||
groups = "pcm";
|
||||
};
|
||||
};
|
||||
|
||||
pwm0_pin: pwm0-pin-g0 {
|
||||
mux {
|
||||
function = "pwm";
|
||||
groups = "pwm0_0";
|
||||
};
|
||||
};
|
||||
|
||||
pwm1_pin: pwm1-pin-g0 {
|
||||
mux {
|
||||
function = "pwm";
|
||||
groups = "pwm1_0";
|
||||
};
|
||||
};
|
||||
|
||||
pwm2_pin: pwm2-pin {
|
||||
mux {
|
||||
function = "pwm";
|
||||
groups = "pwm2";
|
||||
};
|
||||
};
|
||||
|
||||
spi0_flash_pins: spi0-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi0", "spi0_wp_hold";
|
||||
};
|
||||
|
||||
conf-pu {
|
||||
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
|
||||
};
|
||||
|
||||
conf-pd {
|
||||
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
|
||||
};
|
||||
};
|
||||
|
||||
spic_pins: spi1-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi1_1";
|
||||
};
|
||||
};
|
||||
|
||||
uart1_pins: uart1-pins-g1 {
|
||||
mux {
|
||||
function = "uart";
|
||||
groups = "uart1_1";
|
||||
};
|
||||
};
|
||||
|
||||
uart2_pins: uart2-pins-g1 {
|
||||
mux {
|
||||
function = "uart";
|
||||
groups = "uart2_1";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
};
|
||||
@ -106,6 +106,9 @@ mediatek_setup_interfaces()
|
||||
mediatek,mt7988a-rfb)
|
||||
ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3 eth2" eth1
|
||||
;;
|
||||
mercusys,mr80x-v3)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1
|
||||
;;
|
||||
mercusys,mr90x-v1|\
|
||||
mercusys,mr90x-v1-ubi)
|
||||
ucidef_set_interfaces_lan_wan "lan0 lan1 lan2" eth1
|
||||
|
||||
@ -119,6 +119,13 @@ case "$board" in
|
||||
[ "$PHYNBR" = "1" ] && \
|
||||
macaddr_setbit_la "$(mtd_get_mac_binary rf-eeprom 0x4)" > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
mercusys,mr80x-v3)
|
||||
prefix_addr=$(cat /tmp/tp_data/default-mac)
|
||||
addr=${prefix_addr#MAC:}
|
||||
formatted_addr=${addr//-/:}
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $formatted_addr -1 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $formatted_addr -2 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
mercusys,mr90x-v1|\
|
||||
tplink,re6000xd)
|
||||
addr=$(get_mac_binary "/tmp/tp_data/default-mac" 0)
|
||||
|
||||
@ -12,6 +12,7 @@ mount_ubi_part() {
|
||||
|
||||
preinit_mount_cfg_part() {
|
||||
case $(board_name) in
|
||||
mercusys,mr80x-v3|\
|
||||
mercusys,mr90x-v1|\
|
||||
tplink,re6000xd)
|
||||
mount_ubi_part "tp_data"
|
||||
|
||||
@ -1692,3 +1692,18 @@ define Device/zyxel_nwa50ax-pro
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += zyxel_nwa50ax-pro
|
||||
|
||||
define Device/mercusys_mr80x-v3
|
||||
DEVICE_VENDOR := mercusys
|
||||
DEVICE_MODEL := mr80x-v3
|
||||
DEVICE_DTS := mt7981b-mercusys-mr80x-v3
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_PACKAGES := kmod-mt7981-firmware
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
UBINIZE_OPTS := -E 5
|
||||
KERNEL_IN_UBI := 1
|
||||
UBINIZE_PARTS := uboot=$$(TMPDIR)/second-uboot.bin=1
|
||||
IMAGE/sysupgrade.bin := append-ubi | pad-to 128K | check-size 50m | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += mercusys_mr80x-v3
|
||||
|
||||
Loading…
Reference in New Issue
Block a user