ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-22 06:57:57 +00:00
Code Issues Actions 1 Packages Projects Releases Wiki Activity

ipq40xx: add support for ASUS Lyra

Browse Source 
SoC:   Qualcomm IPQ4019 (Dakota) 717 MHz, 4 cores
RAM:   256 MiB (Nanya NT5CC128M16IP-DI)
FLASH: 128 MiB (Macronix NAND)
WiFi0: Qualcomm IPQ4019 b/g/n 2x2
WiFi1: Qualcomm IPQ4019 a/n/ac 2x2
WiFi2: Qualcomm Atheros QCA9886 a/n/ac
BT:    Atheros AR3012
IN:    WPS Button, Reset Button
OUT:   RGB-LED via TI LP5523 9-channel Controller
UART:  Front of Device - 115200 N-8
       Pinout 3.3v - RX - TX - GND (Square is VCC)

Installation:
1. Transfer OpenWRT-initramfs image to the device via SSH to /tmp.
Login credentials are identical to the Web UI.

2. Login to the device via SSH.

3. Flash the initramfs image using

> mtd-write -d linux -i openwrt-image-file

4. Power-cycle the device and wait for OpenWRT to boot.

5. From there flash the OpenWRT-sysupgrade image.

Ethernet-Ports: Although labeled identically, the port next to
the power socket is the LAN port and the other one is WAN. This
is the same behavior as in the stock firmware.

Signed-off-by: Marius Genheimer <mail@f0wl.cc>
[Dropped setup_mac 02_network in favour of 05_set_iface_mac_ipq40xx.sh,
reorderd 02_network entries, added board.bin WA for the QCA9886 from ath79,
minor dts touchup, added rng to 4.19 dts]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
This commit is contained in:
Marius Genheimer 2019-02-12 17:19:51 +01:00 committed by Christian Lamparter
parent 5ee9763aaa
commit 9ad3967f14
12 changed files with 654 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
package/firmware/ipq-wifi/Makefile
View File

@ -17,7 +17,7 @@ endef
# Please send a mail with your device-specific board files upstream.
# You can find instructions and examples on the linux-wireless wiki:
# <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
ALLWIFIBOARDS:=engenius_eap1300 linksys_ea6350v3
ALLWIFIBOARDS:=asus_map-ac2200 engenius_eap1300 linksys_ea6350v3
ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
define Package/ipq-wifi-default
@ -52,6 +52,7 @@ Don't install it for any other device!
endef
#$(eval $(call generate-ipq-wifi-package,<devicename>,<filename>,<displayname>))
$(eval $(call generate-ipq-wifi-package,asus_map-ac2200,board-map-ac2200.bin,ASUS MAP-AC2200))
$(eval $(call generate-ipq-wifi-package,engenius_eap1300,board-engenius_eap1300.bin,EnGenius EAP1300))
$(eval $(call generate-ipq-wifi-package,linksys_ea6350v3,board-linksys_ea6350v3.bin,Linksys EA6350v3))

BIN
package/firmware/ipq-wifi/board-map-ac2200.bin Normal file
View File

Binary file not shown.

9
target/linux/ipq40xx/base-files/etc/board.d/02_network
View File

@ -15,6 +15,11 @@ ipq40xx_setup_interfaces()
8dev,jalapeno)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
asus,map-ac2200|\
openmesh,a42|\
openmesh,a62)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
asus,rt-ac58u|\
zyxel,nbg6617)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
@ -42,10 +47,6 @@ ipq40xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0u@eth0" "3:lan" "4:lan"
;;
openmesh,a42|\
openmesh,a62)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
*)
echo "Unsupported hardware. Network interfaces not initialized"
;;

11
target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@ -106,6 +106,11 @@ case "$FIRMWARE" in
;;
"ath10k/pre-cal-pci-0000:01:00.0.bin")
case "$board" in
asus,map-ac2200)
ath10kcal_ubi_extract "Factory" 36864 12064
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
openmesh,a62)
ath10kcal_extract "0:ART" 36864 12064
;;
@ -119,6 +124,9 @@ case "$FIRMWARE" in
qcom,ap-dk01.1-c1)
ath10kcal_extract "ART" 4096 12064
;;
asus,map-ac2200)
ath10kcal_ubi_extract "Factory" 4096 12064
;;
asus,rt-ac58u)
CI_UBIPART=UBI_DEV
ath10kcal_ubi_extract "Factory" 4096 12064
@ -157,6 +165,9 @@ case "$FIRMWARE" in
qcom,ap-dk01.1-c1)
ath10kcal_extract "ART" 20480 12064
;;
asus,map-ac2200)
ath10kcal_ubi_extract "Factory" 20480 12064
;;
asus,rt-ac58u)
CI_UBIPART=UBI_DEV
ath10kcal_ubi_extract "Factory" 20480 12064

5
target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
View File

@ -4,6 +4,11 @@
preinit_set_mac_address() {
case $(board_name) in
asus,map-ac2200)
base_mac=$(mtd_get_mac_binary_ubi Factory 4102)
ip link set dev eth0 address $(macaddr_add "$base_mac" +1)
ip link set dev eth1 address $(macaddr_add "$base_mac" +3)
;;
meraki,mr33)
mac_lan=$(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102)
[ -n "$mac_lan" ] && ip link set dev eth0 address "$mac_lan"

4
target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
View File

@ -49,6 +49,10 @@ platform_do_upgrade() {
8dev,jalapeno)
nand_do_upgrade "$ARGV"
;;
asus,map-ac2200)
CI_KERNPART="linux"
nand_do_upgrade "$1"
;;
asus,rt-ac58u)
CI_UBIPART="UBI_DEV"
CI_KERNPART="linux"

1
target/linux/ipq40xx/config-4.14
View File

@ -264,6 +264,7 @@ CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LIBFDT=y

304
target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts Normal file
View File

@ -0,0 +1,304 @@
// SPDX-License-Identifier: GPL-2.0+ OR MIT
/dts-v1/;
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "ASUS Lyra MAP-AC2200";
compatible = "asus,map-ac2200";
aliases {
led-boot = &led_blue0;
led-failsafe = &led_red0;
led-running = &led_blue0;
led-upgrade = &led_red0;
};
soc {
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "MIBIB";
reg = <0x80000 0x80000>;
read-only;
};
partition@100000 {
label = "QSEE";
reg = <0x100000 0x100000>;
read-only;
};
partition@200000 {
label = "CDT";
reg = <0x200000 0x80000>;
read-only;
};
partition@280000 {
label = "APPSBL";
reg = <0x280000 0x140000>;
read-only;
};
partition@3c0000 {
label = "APPSBLENV";
reg = <0x3c0000 0x40000>;
read-only;
};
partition@400000 {
label = "ubi";
reg = <0x400000 0x7c00000>;
};
};
};
};
&tlmm {
i2c_0_pins: i2c_0_pinmux {
pinmux {
function = "blsp_i2c0";
pins = "gpio20", "gpio21";
drive-strength = <16>;
bias-disable;
};
};
serial_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
nand_pins: nand_pins {
pullups {
pins = "gpio52", "gpio53", "gpio58",
"gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio54", "gpio55", "gpio56",
"gpio57", "gpio60", "gpio61",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
};
&cryptobam {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&qpic_bam {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi2: wifi@1,0 {
compatible = "qcom,ath10k";
status = "okay";
reg = <0x00010000 0 0 0 0>;
qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
};
};
};
&usb2_hs_phy {
/* Bluetooth module attached via USB */
status = "okay";
};
&blsp1_i2c3 {
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
status = "okay";
led-controller@32 {
/* 9-channel RGB LED controller */
compatible = "national,lp5523";
reg = <0x32>;
clock-mode = [01];
led_blue0: blue0 {
chan-name = "blue0";
label = "map-ac2200:blue:chan0";
led-cur = [fa];
max-cur = [ff];
};
blue1 {
chan-name = "blue1";
label = "map-ac2200:blue:chan1";
led-cur = [fa];
max-cur = [ff];
};
blue2 {
chan-name = "blue2";
label = "map-ac2200:blue:chan2";
led-cur = [fa];
max-cur = [ff];
};
led_green0: green0 {
chan-name = "green0";
label = "map-ac2200:green:chan0";
led-cur = [fa];
max-cur = [ff];
};
green1 {
chan-name = "green1";
label = "map-ac2200:green:chan1";
led-cur = [fa];
max-cur = [ff];
};
green2 {
chan-name = "green2";
label = "map-ac2200:green:chan2";
led-cur = [fa];
max-cur = [ff];
};
led_red0: red0 {
chan-name = "red0";
label = "map-ac2200:red:chan0";
led-cur = [fa];
max-cur = [ff];
};
red1 {
chan-name = "red1";
label = "map-ac2200:red:chan1";
led-cur = [fa];
max-cur = [ff];
};
red2 {
chan-name = "red2";
label = "map-ac2200:red:chan2";
led-cur = [fa];
max-cur = [ff];
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};

309
target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts Normal file
View File

@ -0,0 +1,309 @@
// SPDX-License-Identifier: GPL-2.0+ OR MIT
/dts-v1/;
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "ASUS Lyra MAP-AC2200";
compatible = "asus,map-ac2200";
aliases {
led-boot = &led_blue0;
led-failsafe = &led_red0;
led-running = &led_blue0;
led-upgrade = &led_red0;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "MIBIB";
reg = <0x80000 0x80000>;
read-only;
};
partition@100000 {
label = "QSEE";
reg = <0x100000 0x100000>;
read-only;
};
partition@200000 {
label = "CDT";
reg = <0x200000 0x80000>;
read-only;
};
partition@280000 {
label = "APPSBL";
reg = <0x280000 0x140000>;
read-only;
};
partition@3c0000 {
label = "APPSBLENV";
reg = <0x3c0000 0x40000>;
read-only;
};
partition@400000 {
label = "ubi";
reg = <0x400000 0x7c00000>;
};
};
};
};
&tlmm {
i2c_0_pins: i2c_0_pinmux {
pinmux {
function = "blsp_i2c0";
pins = "gpio20", "gpio21";
drive-strength = <16>;
bias-disable;
};
};
serial_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
nand_pins: nand_pins {
pullups {
pins = "gpio52", "gpio53", "gpio58",
"gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio54", "gpio55", "gpio56",
"gpio57", "gpio60", "gpio61",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
};
&cryptobam {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&qpic_bam {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00000000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi2: wifi@1,0 {
compatible = "qcom,ath10k";
status = "okay";
reg = <0x00010000 0 0 0 0>;
qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
};
};
};
&usb2_hs_phy {
/* Bluetooth module attached via USB */
status = "okay";
};
&blsp1_i2c3 {
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
status = "okay";
led-controller@32 {
/* 9-channel RGB LED controller */
compatible = "national,lp5523";
reg = <0x32>;
clock-mode = [01];
led_blue0: blue0 {
chan-name = "blue0";
label = "map-ac2200:blue:chan0";
led-cur = [fa];
max-cur = [ff];
};
blue1 {
chan-name = "blue1";
label = "map-ac2200:blue:chan1";
led-cur = [fa];
max-cur = [ff];
};
blue2 {
chan-name = "blue2";
label = "map-ac2200:blue:chan2";
led-cur = [fa];
max-cur = [ff];
};
led_green0: green0 {
chan-name = "green0";
label = "map-ac2200:green:chan0";
led-cur = [fa];
max-cur = [ff];
};
green1 {
chan-name = "green1";
label = "map-ac2200:green:chan1";
led-cur = [fa];
max-cur = [ff];
};
green2 {
chan-name = "green2";
label = "map-ac2200:green:chan2";
led-cur = [fa];
max-cur = [ff];
};
led_red0: red0 {
chan-name = "red0";
label = "map-ac2200:red:chan0";
led-cur = [fa];
max-cur = [ff];
};
red1 {
chan-name = "red1";
label = "map-ac2200:red:chan1";
led-cur = [fa];
max-cur = [ff];
};
red2 {
chan-name = "red2";
label = "map-ac2200:red:chan2";
led-cur = [fa];
max-cur = [ff];
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};

9
target/linux/ipq40xx/image/Makefile
View File

@ -62,6 +62,15 @@ define Device/8dev_jalapeno
endef
TARGET_DEVICES += 8dev_jalapeno
define Device/asus_map-ac2200
$(call Device/FitImageLzma)
DEVICE_DTS := qcom-ipq4019-map-ac2200
DEVICE_TITLE := ASUS Lyra MAP-AC2200
IMAGES := sysupgrade.bin
DEVICE_PACKAGES := ipq-wifi-asus_map-ac2200 ath10k-firmware-qca9888-ct kmod-ath3k
endef
TARGET_DEVICES += asus_map-ac2200
define Device/asus_rt-ac58u
$(call Device/FitImageLzma)
DEVICE_DTS := qcom-ipq4018-rt-ac58u

3
target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch
View File

@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -697,7 +697,22 @@ dtb-$(CONFIG_ARCH_QCOM) += \
@@ -697,7 +697,23 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
@ -27,6 +27,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
qcom-ipq4019-ap.dk01.1-c1.dtb \
+ qcom-ipq4019-a62.dtb \
+ qcom-ipq4019-ap.dk04.1-c1.dtb \
+ qcom-ipq4019-map-ac2200.dtb \
+ qcom-ipq4028-wpj428.dtb \
+ qcom-ipq4029-gl-b1300.dtb \
+ qcom-ipq4029-mr33.dtb \

3
target/linux/ipq40xx/patches-4.19/901-arm-boot-add-dts-files.patch
View File

@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -785,11 +785,25 @@ dtb-$(CONFIG_ARCH_QCOM) += \
@@ -785,11 +785,26 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
@ -30,6 +30,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
qcom-ipq4019-ap.dk07.1-c1.dtb \
qcom-ipq4019-ap.dk07.1-c2.dtb \
+ qcom-ipq4019-a62.dtb \
+ qcom-ipq4019-map-ac2200.dtb \
+ qcom-ipq4028-wpj428.dtb \
+ qcom-ipq4029-gl-b1300.dtb \
+ qcom-ipq4029-mr33.dtb \