mirror of
https://github.com/openwrt/openwrt.git
synced 2025-02-06 11:09:31 +00:00
rockchip: fixes and improve for NanoPi R6 series
Improvement and fixes for the nanopi r6 series, pending on the kernel mailing list https://lore.kernel.org/all/20240612205056.397204-1-seb-dev@mail.de Signed-off-by: Antonio Flores <antflores627@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16275 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Antonio Flores
Hauke Mehrtens
parent
55c46cbabd
commit
9640bb0c05
File diff suppressed because it is too large
Load Diff
@ -0,0 +1,470 @@
|
|||||||
|
From cd909b668132acd6f846336f15abf5185cfc4dbc Mon Sep 17 00:00:00 2001
|
||||||
|
From: Sebastian Kropatsch <seb-dev@mail.de>
|
||||||
|
Date: Wed, 12 Jun 2024 22:48:11 +0200
|
||||||
|
Subject: [PATCH 2/5] arm64: dts: rockchip: Fix regulators, gmac and naming on
|
||||||
|
NanoPi R6C/R6S
|
||||||
|
|
||||||
|
Fix the alphabetical ordering in some nodes and rename some regulators
|
||||||
|
and pins to match the schematics [1][2] as well as to adhere to
|
||||||
|
preferred naming schemes.
|
||||||
|
|
||||||
|
In addition to that:
|
||||||
|
* vcc_3v3_sd_s0: Fix voltage to be 3.3V
|
||||||
|
* vcc3v3_pcie:
|
||||||
|
- Move to NanoPi R6C, this power switch is not available on R6S
|
||||||
|
- Fix vin-supply (is vcc_5v0 per schematics)
|
||||||
|
- Add gpios/pincrtl to enable power
|
||||||
|
* vcc5v0_usb: Remove this regulator since according to the schematics,
|
||||||
|
vcc5v0_host_20 and vcc5v0_usb_otg0 are directly powered by vcc_5v0
|
||||||
|
* gmac1: Add rx_delay of 0 (no delay since phy-mode = "rgmii-rxid")
|
||||||
|
* rgmii_phy1: Add phy-supply as seen in schematics
|
||||||
|
* pcie2*:
|
||||||
|
- Add pinctrl reset pins
|
||||||
|
- Update vpcie3v3-supply to match the schematics
|
||||||
|
* sdhci: Add vmmc-supply and vqmmc-supply
|
||||||
|
|
||||||
|
Links:
|
||||||
|
[1] https://wiki.friendlyelec.com/wiki/images/f/f7/NanoPi_R6C_2302_SCH.PDF
|
||||||
|
[2] https://wiki.friendlyelec.com/wiki/images/2/2f/NanoPi_R6S_2208_SCH.PDF
|
||||||
|
|
||||||
|
Fixes: f1b11f43b3e9 ("arm64: dts: rockchip: Add support for NanoPi R6S")
|
||||||
|
Signed-off-by: Sebastian Kropatsch <seb-dev@mail.de>
|
||||||
|
---
|
||||||
|
.../boot/dts/rockchip/rk3588s-nanopi-r6.dtsi | 169 +++++++++---------
|
||||||
|
.../boot/dts/rockchip/rk3588s-nanopi-r6c.dts | 28 +++
|
||||||
|
.../boot/dts/rockchip/rk3588s-nanopi-r6s.dts | 5 +
|
||||||
|
3 files changed, 122 insertions(+), 80 deletions(-)
|
||||||
|
|
||||||
|
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
|
||||||
|
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
|
||||||
|
@@ -21,7 +21,7 @@
|
||||||
|
stdout-path = "serial2:1500000n8";
|
||||||
|
};
|
||||||
|
|
||||||
|
- adc-keys {
|
||||||
|
+ adc-key-maskrom {
|
||||||
|
compatible = "adc-keys";
|
||||||
|
io-channels = <&saradc 0>;
|
||||||
|
io-channel-names = "buttons";
|
||||||
|
@@ -41,10 +41,10 @@
|
||||||
|
pinctrl-0 = <&key1_pin>;
|
||||||
|
|
||||||
|
button-user {
|
||||||
|
- label = "User";
|
||||||
|
- linux,code = <BTN_1>;
|
||||||
|
- gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||||
|
debounce-interval = <50>;
|
||||||
|
+ gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||||
|
+ label = "User Button";
|
||||||
|
+ linux,code = <BTN_1>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
@@ -80,26 +80,27 @@
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
- vcc5v0_sys: vcc5v0-sys-regulator {
|
||||||
|
+ vcc_5v0: regulator-vcc-5v0 {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
- regulator-name = "vcc5v0_sys";
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-boot-on;
|
||||||
|
regulator-min-microvolt = <5000000>;
|
||||||
|
regulator-max-microvolt = <5000000>;
|
||||||
|
+ regulator-name = "vcc_5v0";
|
||||||
|
};
|
||||||
|
|
||||||
|
- vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
|
||||||
|
+ vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
- regulator-name = "vcc_1v1_nldo_s3";
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-boot-on;
|
||||||
|
regulator-min-microvolt = <1100000>;
|
||||||
|
regulator-max-microvolt = <1100000>;
|
||||||
|
- vin-supply = <&vcc5v0_sys>;
|
||||||
|
+ regulator-name = "vcc_1v1_nldo_s3";
|
||||||
|
+ vin-supply = <&vcc_5v0>;
|
||||||
|
};
|
||||||
|
|
||||||
|
- vcc_3v3_s0: vcc-3v3-s0-regulator {
|
||||||
|
+ /* SY6280AAC power switch (U3824 in schematics) */
|
||||||
|
+ vcc_3v3_s0: regulator-vcc-3v3-s0 {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-boot-on;
|
||||||
|
@@ -109,61 +110,45 @@
|
||||||
|
vin-supply = <&vcc_3v3_s3>;
|
||||||
|
};
|
||||||
|
|
||||||
|
- vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator {
|
||||||
|
+ vcc_3v3_sd_s0: regulator-vcc-3v3-sd-s0 {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
enable-active-high;
|
||||||
|
gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&sd_s0_pwr>;
|
||||||
|
- regulator-name = "vcc_3v3_sd_s0";
|
||||||
|
- regulator-boot-on;
|
||||||
|
- regulator-max-microvolt = <3000000>;
|
||||||
|
- regulator-min-microvolt = <3000000>;
|
||||||
|
- vin-supply = <&vcc_3v3_s3>;
|
||||||
|
- };
|
||||||
|
-
|
||||||
|
- vcc_3v3_pcie20: vcc3v3-pcie20-regulator {
|
||||||
|
- compatible = "regulator-fixed";
|
||||||
|
- regulator-name = "vcc_3v3_pcie20";
|
||||||
|
- regulator-always-on;
|
||||||
|
regulator-boot-on;
|
||||||
|
- regulator-min-microvolt = <3300000>;
|
||||||
|
regulator-max-microvolt = <3300000>;
|
||||||
|
+ regulator-min-microvolt = <3300000>;
|
||||||
|
+ regulator-name = "vcc_3v3_sd_s0";
|
||||||
|
vin-supply = <&vcc_3v3_s3>;
|
||||||
|
};
|
||||||
|
|
||||||
|
- vcc5v0_usb: vcc5v0-usb-regulator {
|
||||||
|
- compatible = "regulator-fixed";
|
||||||
|
- regulator-name = "vcc5v0_usb";
|
||||||
|
- regulator-always-on;
|
||||||
|
- regulator-boot-on;
|
||||||
|
- regulator-min-microvolt = <5000000>;
|
||||||
|
- regulator-max-microvolt = <5000000>;
|
||||||
|
- vin-supply = <&vcc5v0_sys>;
|
||||||
|
- };
|
||||||
|
-
|
||||||
|
- vcc5v0_usb_otg0: vcc5v0-usb-otg0-regulator {
|
||||||
|
+ /* SY6280AAC power switch (U9539 in schematics) */
|
||||||
|
+ /* For USB 2.0 Type-A port */
|
||||||
|
+ vcc_5v0_host_20: regulator-vcc-5v0-host-20 {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
enable-active-high;
|
||||||
|
- gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||||
|
+ gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
- pinctrl-0 = <&typec5v_pwren>;
|
||||||
|
- regulator-name = "vcc5v0_usb_otg0";
|
||||||
|
+ pinctrl-0 = <&usb_host_pwren_h>;
|
||||||
|
regulator-min-microvolt = <5000000>;
|
||||||
|
regulator-max-microvolt = <5000000>;
|
||||||
|
- vin-supply = <&vcc5v0_usb>;
|
||||||
|
+ regulator-name = "vcc_5v0_host_20";
|
||||||
|
+ vin-supply = <&vcc_5v0>;
|
||||||
|
};
|
||||||
|
|
||||||
|
- vcc5v0_host_20: vcc5v0-host-20-regulator {
|
||||||
|
+ /* SY6280AAC power switch (U9538 in schematics) */
|
||||||
|
+ /* For USB 3.0 Type-A port */
|
||||||
|
+ vcc5v0_usb_otg0: regulator-vcc5v0-usb-otg0 {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
enable-active-high;
|
||||||
|
- gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||||
|
+ gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
- pinctrl-0 = <&vcc5v0_host20_en>;
|
||||||
|
- regulator-name = "vcc5v0_host_20";
|
||||||
|
+ pinctrl-0 = <&typec5v_pwren_h>;
|
||||||
|
regulator-min-microvolt = <5000000>;
|
||||||
|
regulator-max-microvolt = <5000000>;
|
||||||
|
- vin-supply = <&vcc5v0_usb>;
|
||||||
|
+ regulator-name = "vcc5v0_usb_otg0";
|
||||||
|
+ vin-supply = <&vcc_5v0>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
@@ -211,12 +196,13 @@
|
||||||
|
clock_in_out = "output";
|
||||||
|
phy-handle = <&rgmii_phy1>;
|
||||||
|
phy-mode = "rgmii-rxid";
|
||||||
|
+ pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&gmac1_miim
|
||||||
|
&gmac1_tx_bus2
|
||||||
|
&gmac1_rx_bus2
|
||||||
|
&gmac1_rgmii_clk
|
||||||
|
&gmac1_rgmii_bus>;
|
||||||
|
- pinctrl-names = "default";
|
||||||
|
+ rx_delay = <0x00>;
|
||||||
|
tx_delay = <0x42>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
@@ -230,13 +216,13 @@
|
||||||
|
compatible = "rockchip,rk8602";
|
||||||
|
reg = <0x42>;
|
||||||
|
fcs,suspend-voltage-selector = <1>;
|
||||||
|
- regulator-name = "vdd_cpu_big0_s0";
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-boot-on;
|
||||||
|
regulator-min-microvolt = <550000>;
|
||||||
|
regulator-max-microvolt = <1050000>;
|
||||||
|
+ regulator-name = "vdd_cpu_big0_s0";
|
||||||
|
regulator-ramp-delay = <2300>;
|
||||||
|
- vin-supply = <&vcc5v0_sys>;
|
||||||
|
+ vin-supply = <&vcc_5v0>;
|
||||||
|
|
||||||
|
regulator-state-mem {
|
||||||
|
regulator-off-in-suspend;
|
||||||
|
@@ -247,13 +233,13 @@
|
||||||
|
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
||||||
|
reg = <0x43>;
|
||||||
|
fcs,suspend-voltage-selector = <1>;
|
||||||
|
- regulator-name = "vdd_cpu_big1_s0";
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-boot-on;
|
||||||
|
regulator-min-microvolt = <550000>;
|
||||||
|
regulator-max-microvolt = <1050000>;
|
||||||
|
+ regulator-name = "vdd_cpu_big1_s0";
|
||||||
|
regulator-ramp-delay = <2300>;
|
||||||
|
- vin-supply = <&vcc5v0_sys>;
|
||||||
|
+ vin-supply = <&vcc_5v0>;
|
||||||
|
|
||||||
|
regulator-state-mem {
|
||||||
|
regulator-off-in-suspend;
|
||||||
|
@@ -268,13 +254,13 @@
|
||||||
|
compatible = "rockchip,rk8602";
|
||||||
|
reg = <0x42>;
|
||||||
|
fcs,suspend-voltage-selector = <1>;
|
||||||
|
- regulator-name = "vdd_npu_s0";
|
||||||
|
+ regulator-always-on;
|
||||||
|
+ regulator-boot-on;
|
||||||
|
regulator-min-microvolt = <550000>;
|
||||||
|
regulator-max-microvolt = <950000>;
|
||||||
|
+ regulator-name = "vdd_npu_s0";
|
||||||
|
regulator-ramp-delay = <2300>;
|
||||||
|
- regulator-boot-on;
|
||||||
|
- regulator-always-on;
|
||||||
|
- vin-supply = <&vcc5v0_sys>;
|
||||||
|
+ vin-supply = <&vcc_5v0>;
|
||||||
|
|
||||||
|
regulator-state-mem {
|
||||||
|
regulator-off-in-suspend;
|
||||||
|
@@ -293,35 +279,43 @@
|
||||||
|
reg = <0x51>;
|
||||||
|
#clock-cells = <0>;
|
||||||
|
clock-output-names = "hym8563";
|
||||||
|
- pinctrl-names = "default";
|
||||||
|
- pinctrl-0 = <&rtc_int>;
|
||||||
|
interrupt-parent = <&gpio0>;
|
||||||
|
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
||||||
|
+ pinctrl-names = "default";
|
||||||
|
+ pinctrl-0 = <&rtc_int>;
|
||||||
|
wakeup-source;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
+/* RTL8211F-CG Ethernet */
|
||||||
|
&mdio1 {
|
||||||
|
rgmii_phy1: ethernet-phy@1 {
|
||||||
|
compatible = "ethernet-phy-id001c.c916";
|
||||||
|
reg = <0x1>;
|
||||||
|
+ phy-supply = <&vcc_3v3_s0>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
- pinctrl-0 = <&rtl8211f_rst>;
|
||||||
|
+ pinctrl-0 = <&gmac1_rstn_l>;
|
||||||
|
reset-assert-us = <20000>;
|
||||||
|
reset-deassert-us = <100000>;
|
||||||
|
reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
+/* RTL8125BG Ethernet */
|
||||||
|
&pcie2x1l1 {
|
||||||
|
+ pinctrl-names = "default";
|
||||||
|
+ pinctrl-0 = <&pcie20x1_1_perstn_m2>;
|
||||||
|
reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
|
||||||
|
- vpcie3v3-supply = <&vcc_3v3_pcie20>;
|
||||||
|
+ vpcie3v3-supply = <&vcc_3v3_s3>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
+/* R6C: M.2 M-Key socket */
|
||||||
|
+/* R6S: RTL8125BG Ethernet */
|
||||||
|
&pcie2x1l2 {
|
||||||
|
+ pinctrl-names = "default";
|
||||||
|
+ pinctrl-0 = <&pcie20x1_2_perstn_m0>;
|
||||||
|
reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
|
||||||
|
- vpcie3v3-supply = <&vcc_3v3_pcie20>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
@@ -360,24 +354,34 @@
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
+ pcie {
|
||||||
|
+ pcie20x1_1_perstn_m2: pcie2x1-1-rst {
|
||||||
|
+ rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ pcie20x1_2_perstn_m0: pcie2x1-2-rst {
|
||||||
|
+ rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
sdmmc {
|
||||||
|
- sd_s0_pwr: sd-s0-pwr {
|
||||||
|
+ sd_s0_pwr: sd-pwr {
|
||||||
|
rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
usb {
|
||||||
|
- typec5v_pwren: typec5v-pwren {
|
||||||
|
+ typec5v_pwren_h: usb3-pwren {
|
||||||
|
rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||||
|
};
|
||||||
|
|
||||||
|
- vcc5v0_host20_en: vcc5v0-host20-en {
|
||||||
|
+ usb_host_pwren_h: usb2-pwren {
|
||||||
|
rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
rtl8211f {
|
||||||
|
- rtl8211f_rst: rtl8211f-rst {
|
||||||
|
+ gmac1_rstn_l: rtl8211f-rst {
|
||||||
|
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
@@ -388,15 +392,19 @@
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
+/* eMMC */
|
||||||
|
&sdhci {
|
||||||
|
bus-width = <8>;
|
||||||
|
- no-sdio;
|
||||||
|
+ mmc-hs200-1_8v;
|
||||||
|
no-sd;
|
||||||
|
+ no-sdio;
|
||||||
|
non-removable;
|
||||||
|
- mmc-hs200-1_8v;
|
||||||
|
+ vmmc-supply = <&vcc_3v3_s3>;
|
||||||
|
+ vqmmc-supply = <&vcc_1v8_s3>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
+/* microSD card */
|
||||||
|
&sdmmc {
|
||||||
|
bus-width = <4>;
|
||||||
|
cap-sd-highspeed;
|
||||||
|
@@ -411,16 +419,15 @@
|
||||||
|
};
|
||||||
|
|
||||||
|
&spi2 {
|
||||||
|
- status = "okay";
|
||||||
|
assigned-clocks = <&cru CLK_SPI2>;
|
||||||
|
assigned-clock-rates = <200000000>;
|
||||||
|
+ num-cs = <1>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
||||||
|
- num-cs = <1>;
|
||||||
|
+ status = "okay";
|
||||||
|
|
||||||
|
- pmic@0 {
|
||||||
|
+ rk806_single: pmic@0 {
|
||||||
|
compatible = "rockchip,rk806";
|
||||||
|
- spi-max-frequency = <1000000>;
|
||||||
|
reg = <0x0>;
|
||||||
|
|
||||||
|
interrupt-parent = <&gpio0>;
|
||||||
|
@@ -430,23 +437,24 @@
|
||||||
|
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||||
|
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||||
|
|
||||||
|
+ spi-max-frequency = <1000000>;
|
||||||
|
system-power-controller;
|
||||||
|
|
||||||
|
- vcc1-supply = <&vcc5v0_sys>;
|
||||||
|
- vcc2-supply = <&vcc5v0_sys>;
|
||||||
|
- vcc3-supply = <&vcc5v0_sys>;
|
||||||
|
- vcc4-supply = <&vcc5v0_sys>;
|
||||||
|
- vcc5-supply = <&vcc5v0_sys>;
|
||||||
|
- vcc6-supply = <&vcc5v0_sys>;
|
||||||
|
- vcc7-supply = <&vcc5v0_sys>;
|
||||||
|
- vcc8-supply = <&vcc5v0_sys>;
|
||||||
|
- vcc9-supply = <&vcc5v0_sys>;
|
||||||
|
- vcc10-supply = <&vcc5v0_sys>;
|
||||||
|
+ vcc1-supply = <&vcc_5v0>;
|
||||||
|
+ vcc2-supply = <&vcc_5v0>;
|
||||||
|
+ vcc3-supply = <&vcc_5v0>;
|
||||||
|
+ vcc4-supply = <&vcc_5v0>;
|
||||||
|
+ vcc5-supply = <&vcc_5v0>;
|
||||||
|
+ vcc6-supply = <&vcc_5v0>;
|
||||||
|
+ vcc7-supply = <&vcc_5v0>;
|
||||||
|
+ vcc8-supply = <&vcc_5v0>;
|
||||||
|
+ vcc9-supply = <&vcc_5v0>;
|
||||||
|
+ vcc10-supply = <&vcc_5v0>;
|
||||||
|
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||||
|
- vcc12-supply = <&vcc5v0_sys>;
|
||||||
|
+ vcc12-supply = <&vcc_5v0>;
|
||||||
|
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||||
|
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||||
|
- vcca-supply = <&vcc5v0_sys>;
|
||||||
|
+ vcca-supply = <&vcc_5v0>;
|
||||||
|
|
||||||
|
gpio-controller;
|
||||||
|
#gpio-cells = <2>;
|
||||||
|
@@ -745,10 +753,11 @@
|
||||||
|
};
|
||||||
|
|
||||||
|
&u2phy2_host {
|
||||||
|
- phy-supply = <&vcc5v0_host_20>;
|
||||||
|
+ phy-supply = <&vcc_5v0_host_20>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
+/* Debug UART */
|
||||||
|
&uart2 {
|
||||||
|
pinctrl-0 = <&uart2m0_xfer>;
|
||||||
|
status = "okay";
|
||||||
|
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
|
||||||
|
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
|
||||||
|
@@ -7,8 +7,36 @@
|
||||||
|
/ {
|
||||||
|
model = "FriendlyElec NanoPi R6C";
|
||||||
|
compatible = "friendlyarm,nanopi-r6c", "rockchip,rk3588s";
|
||||||
|
+
|
||||||
|
+ /* MP2143DJ power switch (U9536 in schematics) */
|
||||||
|
+ vcc3v3_pcie: regulator-vcc3v3-pcie {
|
||||||
|
+ compatible = "regulator-fixed";
|
||||||
|
+ enable-active-high;
|
||||||
|
+ gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||||
|
+ pinctrl-names = "default";
|
||||||
|
+ pinctrl-0 = <&pcie20x1_2_con_pwren>;
|
||||||
|
+ regulator-always-on;
|
||||||
|
+ regulator-boot-on;
|
||||||
|
+ regulator-min-microvolt = <3300000>;
|
||||||
|
+ regulator-max-microvolt = <3300000>;
|
||||||
|
+ regulator-name = "vcc3v3_pcie";
|
||||||
|
+ vin-supply = <&vcc_5v0>;
|
||||||
|
+ };
|
||||||
|
};
|
||||||
|
|
||||||
|
&lan2_led {
|
||||||
|
label = "user_led";
|
||||||
|
};
|
||||||
|
+
|
||||||
|
+/* M.2 M-Key socket */
|
||||||
|
+&pcie2x1l2 {
|
||||||
|
+ vpcie3v3-supply = <&vcc3v3_pcie>;
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&pinctrl {
|
||||||
|
+ pcie {
|
||||||
|
+ pcie20x1_2_con_pwren: pcie20x1-2-con-pwren {
|
||||||
|
+ rockchip,pins = <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+};
|
||||||
|
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts
|
||||||
|
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts
|
||||||
|
@@ -12,3 +12,8 @@
|
||||||
|
&lan2_led {
|
||||||
|
label = "lan2_led";
|
||||||
|
};
|
||||||
|
+
|
||||||
|
+/* RTL8125BG Ethernet */
|
||||||
|
+&pcie2x1l2 {
|
||||||
|
+ vpcie3v3-supply = <&vcc_3v3_s3>;
|
||||||
|
+};
|
||||||
@ -0,0 +1,184 @@
|
|||||||
|
From dfa0e0a42f3e256189849a45203aac98a0b4d1aa Mon Sep 17 00:00:00 2001
|
||||||
|
From: Sebastian Kropatsch <seb-dev@mail.de>
|
||||||
|
Date: Wed, 12 Jun 2024 22:48:12 +0200
|
||||||
|
Subject: [PATCH 3/5] arm64: dts: rockchip: Improve LEDs on NanoPi R6C/R6S
|
||||||
|
|
||||||
|
Move led-3 node into NanoPi R6C/R6S's source files since they have
|
||||||
|
different functionalities on each board: On the R6S this LED is used
|
||||||
|
to signal LAN2 link up, while on the R6C this LED does not have a
|
||||||
|
pre-defined purpose.
|
||||||
|
|
||||||
|
In addition to that:
|
||||||
|
- Remove deprecated label property
|
||||||
|
- Add color and function properties
|
||||||
|
- Add linux,default-trigger to trigger on Ethernet link
|
||||||
|
|
||||||
|
Signed-off-by: Sebastian Kropatsch <seb-dev@mail.de>
|
||||||
|
---
|
||||||
|
.../boot/dts/rockchip/rk3588s-nanopi-r6.dtsi | 32 +++++++------------
|
||||||
|
.../boot/dts/rockchip/rk3588s-nanopi-r6c.dts | 22 ++++++++++---
|
||||||
|
.../boot/dts/rockchip/rk3588s-nanopi-r6s.dts | 26 +++++++++++++--
|
||||||
|
3 files changed, 54 insertions(+), 26 deletions(-)
|
||||||
|
|
||||||
|
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
|
||||||
|
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
|
||||||
|
@@ -8,6 +8,7 @@
|
||||||
|
#include <dt-bindings/pinctrl/rockchip.h>
|
||||||
|
#include <dt-bindings/gpio/gpio.h>
|
||||||
|
#include <dt-bindings/input/input.h>
|
||||||
|
+#include <dt-bindings/leds/common.h>
|
||||||
|
#include "rk3588s.dtsi"
|
||||||
|
|
||||||
|
/ {
|
||||||
|
@@ -52,7 +53,8 @@
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
|
||||||
|
sys_led: led-0 {
|
||||||
|
- label = "sys_led";
|
||||||
|
+ color = <LED_COLOR_ID_RED>;
|
||||||
|
+ function = LED_FUNCTION_HEARTBEAT;
|
||||||
|
gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||||
|
linux,default-trigger = "heartbeat";
|
||||||
|
pinctrl-names = "default";
|
||||||
|
@@ -60,24 +62,22 @@
|
||||||
|
};
|
||||||
|
|
||||||
|
wan_led: led-1 {
|
||||||
|
- label = "wan_led";
|
||||||
|
+ color = <LED_COLOR_ID_GREEN>;
|
||||||
|
+ function = LED_FUNCTION_WAN;
|
||||||
|
gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
|
||||||
|
+ linux,default-trigger = "stmmac-0:01:link";
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&wan_led_pin>;
|
||||||
|
};
|
||||||
|
|
||||||
|
lan1_led: led-2 {
|
||||||
|
- label = "lan1_led";
|
||||||
|
+ color = <LED_COLOR_ID_GREEN>;
|
||||||
|
+ function = LED_FUNCTION_LAN;
|
||||||
|
gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
|
||||||
|
+ linux,default-trigger = "r8169-3-3100:00:link";
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&lan1_led_pin>;
|
||||||
|
};
|
||||||
|
-
|
||||||
|
- lan2_led: led-3 {
|
||||||
|
- gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||||
|
- pinctrl-names = "default";
|
||||||
|
- pinctrl-0 = <&lan2_led_pin>;
|
||||||
|
- };
|
||||||
|
};
|
||||||
|
|
||||||
|
vcc_5v0: regulator-vcc-5v0 {
|
||||||
|
@@ -328,23 +328,15 @@
|
||||||
|
|
||||||
|
gpio-leds {
|
||||||
|
sys_led_pin: sys-led-pin {
|
||||||
|
- rockchip,pins =
|
||||||
|
- <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||||
|
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||||
|
};
|
||||||
|
|
||||||
|
wan_led_pin: wan-led-pin {
|
||||||
|
- rockchip,pins =
|
||||||
|
- <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||||
|
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||||
|
};
|
||||||
|
|
||||||
|
lan1_led_pin: lan1-led-pin {
|
||||||
|
- rockchip,pins =
|
||||||
|
- <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||||
|
- };
|
||||||
|
-
|
||||||
|
- lan2_led_pin: lan2-led-pin {
|
||||||
|
- rockchip,pins =
|
||||||
|
- <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||||
|
+ rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
|
||||||
|
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
|
||||||
|
@@ -8,6 +8,18 @@
|
||||||
|
model = "FriendlyElec NanoPi R6C";
|
||||||
|
compatible = "friendlyarm,nanopi-r6c", "rockchip,rk3588s";
|
||||||
|
|
||||||
|
+ leds {
|
||||||
|
+ compatible = "gpio-leds";
|
||||||
|
+
|
||||||
|
+ led1_led: led-3 {
|
||||||
|
+ color = <LED_COLOR_ID_GREEN>;
|
||||||
|
+ function = "led1";
|
||||||
|
+ gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||||
|
+ pinctrl-names = "default";
|
||||||
|
+ pinctrl-0 = <&led1_led_pin>;
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
/* MP2143DJ power switch (U9536 in schematics) */
|
||||||
|
vcc3v3_pcie: regulator-vcc3v3-pcie {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
@@ -24,16 +36,18 @@
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
-&lan2_led {
|
||||||
|
- label = "user_led";
|
||||||
|
-};
|
||||||
|
-
|
||||||
|
/* M.2 M-Key socket */
|
||||||
|
&pcie2x1l2 {
|
||||||
|
vpcie3v3-supply = <&vcc3v3_pcie>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&pinctrl {
|
||||||
|
+ gpio-leds {
|
||||||
|
+ led1_led_pin: led1-led-pin {
|
||||||
|
+ rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
pcie {
|
||||||
|
pcie20x1_2_con_pwren: pcie20x1-2-con-pwren {
|
||||||
|
rockchip,pins = <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||||
|
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts
|
||||||
|
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6s.dts
|
||||||
|
@@ -7,13 +7,35 @@
|
||||||
|
/ {
|
||||||
|
model = "FriendlyElec NanoPi R6S";
|
||||||
|
compatible = "friendlyarm,nanopi-r6s", "rockchip,rk3588s";
|
||||||
|
+
|
||||||
|
+ leds {
|
||||||
|
+ compatible = "gpio-leds";
|
||||||
|
+
|
||||||
|
+ lan2_led: led-3 {
|
||||||
|
+ color = <LED_COLOR_ID_GREEN>;
|
||||||
|
+ function = LED_FUNCTION_LAN;
|
||||||
|
+ function-enumerator = <2>;
|
||||||
|
+ gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||||
|
+ linux,default-trigger = "r8169-4-4100:00:link";
|
||||||
|
+ pinctrl-names = "default";
|
||||||
|
+ pinctrl-0 = <&lan2_led_pin>;
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
};
|
||||||
|
|
||||||
|
-&lan2_led {
|
||||||
|
- label = "lan2_led";
|
||||||
|
+&lan1_led {
|
||||||
|
+ function-enumerator = <1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
/* RTL8125BG Ethernet */
|
||||||
|
&pcie2x1l2 {
|
||||||
|
vpcie3v3-supply = <&vcc_3v3_s3>;
|
||||||
|
};
|
||||||
|
+
|
||||||
|
+&pinctrl {
|
||||||
|
+ gpio-leds {
|
||||||
|
+ lan2_led_pin: lan2-led-pin {
|
||||||
|
+ rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+};
|
||||||
@ -0,0 +1,62 @@
|
|||||||
|
From e067643b4e321db4de3274198b13732cce37f5c1 Mon Sep 17 00:00:00 2001
|
||||||
|
From: Sebastian Kropatsch <seb-dev@mail.de>
|
||||||
|
Date: Wed, 12 Jun 2024 22:48:13 +0200
|
||||||
|
Subject: [PATCH 4/5] arm64: dts: rockchip: Enable lower USB3 port on NanoPi
|
||||||
|
R6C/R6S
|
||||||
|
|
||||||
|
Enable support for the lower USB 3.0 Type-A port on the NanoPi R6C and
|
||||||
|
NanoPi R6S. The upper USB 2.0 Type-A port is already supported.
|
||||||
|
|
||||||
|
Signed-off-by: Sebastian Kropatsch <seb-dev@mail.de>
|
||||||
|
---
|
||||||
|
.../boot/dts/rockchip/rk3588s-nanopi-r6.dtsi | 28 +++++++++++++++++++
|
||||||
|
1 file changed, 28 insertions(+)
|
||||||
|
|
||||||
|
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
|
||||||
|
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
|
||||||
|
@@ -740,6 +740,17 @@
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
+/* USB2 PHY for USB 3.0 Type-A (lower port)*/
|
||||||
|
+&u2phy0 {
|
||||||
|
+ status = "okay";
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&u2phy0_otg {
|
||||||
|
+ phy-supply = <&vcc5v0_usb_otg0>;
|
||||||
|
+ status = "okay";
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+/* USB2 PHY for USB 2.0 Type-A (upper port)*/
|
||||||
|
&u2phy2 {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
@@ -755,10 +766,27 @@
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
+/* USB 2.0 Type-A (upper port) */
|
||||||
|
+/* PHY: <&u2phy2_host> */
|
||||||
|
&usb_host0_ehci {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
+/* USB 2.0 Type-A (upper port) */
|
||||||
|
+/* PHY: <&u2phy2_host> */
|
||||||
|
&usb_host0_ohci {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
+
|
||||||
|
+/* USB 3.0 Type-A (lower port) */
|
||||||
|
+/* PHYs: <&u2phy0_otg>, <&usbdp_phy0> */
|
||||||
|
+&usb_host0_xhci {
|
||||||
|
+ dr_mode = "host";
|
||||||
|
+ extcon = <&u2phy0>;
|
||||||
|
+ status = "okay";
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+/* USB3 PHY for USB 3.0 Type-A (lower port)*/
|
||||||
|
+&usbdp_phy0 {
|
||||||
|
+ status = "okay";
|
||||||
|
+};
|
||||||
@ -0,0 +1,27 @@
|
|||||||
|
From 04cd713c3834b87fcd147e4bf7b7066cfe60fffc Mon Sep 17 00:00:00 2001
|
||||||
|
From: Sebastian Kropatsch <seb-dev@mail.de>
|
||||||
|
Date: Wed, 12 Jun 2024 22:48:14 +0200
|
||||||
|
Subject: [PATCH 5/5] arm64: dts: rockchip: Enable GPU on NanoPi R6C/R6S
|
||||||
|
|
||||||
|
Enable the Mali GPU on the FriendlyElec NanoPi R6C and R6S.
|
||||||
|
|
||||||
|
Signed-off-by: Sebastian Kropatsch <seb-dev@mail.de>
|
||||||
|
---
|
||||||
|
arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi | 6 ++++++
|
||||||
|
1 file changed, 6 insertions(+)
|
||||||
|
|
||||||
|
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
|
||||||
|
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
|
||||||
|
@@ -207,6 +207,12 @@
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
+&gpu {
|
||||||
|
+ mali-supply = <&vdd_gpu_s0>;
|
||||||
|
+ sram-supply = <&vdd_gpu_mem_s0>;
|
||||||
|
+ status = "okay";
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
&i2c0 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&i2c0m2_xfer>;
|
||||||
Loading…
x
Reference in New Issue
Block a user