ath79: create DTSI for ar9341 TP-Link devices

This patch creates a shared DTSI for the TP-Link devices based
on ar9341 as those share a lot of definitions.

While at it, change from gpio-keys-polled to gpio-keys, remove
unused pll-data and remove some inherited stuff, too.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Adrian Schmutzler 2019-08-12 15:12:02 +02:00 committed by Chuanhong Guo
parent e7ab1b5173
commit 95dfeabf26
4 changed files with 152 additions and 356 deletions

View File

@ -0,0 +1,114 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9341.dtsi"
/ {
aliases {
serial0 = &uart;
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
keys: keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins>;
rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
};
leds: leds {
compatible = "gpio-leds";
system: power {
label = "tp-link:green:power";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan {
label = "tp-link:green:wlan";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
qss {
label = "tp-link:green:qss";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
wan {
label = "tp-link:green:wan";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "tp-link:green:lan1";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "tp-link:green:lan2";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
lan3 {
label = "tp-link:green:lan3";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
lan4 {
label = "tp-link:green:lan4";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
};
};
&ref {
clock-frequency = <25000000>;
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&eth0 {
status = "okay";
phy-handle = <&swphy0>;
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-1)>;
};
&eth1 {
mtd-mac-address = <&uboot 0x1fc00>;
gmac-config {
device = <&gmac>;
switch-phy-swap = <1>;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

View File

@ -1,109 +1,32 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9341.dtsi"
#include "ar9341_tplink.dtsi"
/ {
model = "TP-Link TL-MR3420 v2";
compatible = "tplink,tl-mr3420-v2", "qca,ar9341";
};
aliases {
serial0 = &uart;
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins>;
&keys {
reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
};
rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
system: power {
label = "tp-link:green:power";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan {
label = "tp-link:green:wlan";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
qss {
label = "tp-link:green:qss";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
wan {
label = "tp-link:green:wan";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "tp-link:green:lan1";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "tp-link:green:lan2";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
lan3 {
label = "tp-link:green:lan3";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
lan4 {
label = "tp-link:green:lan4";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
&leds {
usb {
label = "tp-link:green:usb";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
};
};
&ref {
clock-frequency = <25000000>;
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
usb_power {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
@ -148,32 +71,6 @@
};
};
&eth0 {
status = "okay";
phy-handle = <&swphy0>;
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-1)>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
gmac-config {
device = <&gmac>;
switch-phy-swap = <1>;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};
&usb {
#address-cells = <1>;
#size-cells = <0>;

View File

@ -1,102 +1,20 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9341.dtsi"
#include "ar9341_tplink.dtsi"
/ {
model = "TP-Link TL-WR841N/ND v8";
compatible = "tplink,tl-wr841-v8", "qca,ar9341";
};
aliases {
serial0 = &uart;
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins>;
&keys {
reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
system: power {
label = "tp-link:green:power";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan {
label = "tp-link:green:wlan";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
qss {
label = "tp-link:green:qss";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
wan {
label = "tp-link:green:wan";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "tp-link:green:lan1";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "tp-link:green:lan2";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
lan3 {
label = "tp-link:green:lan3";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
lan4 {
label = "tp-link:green:lan4";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
};
};
&ref {
clock-frequency = <25000000>;
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&spi {
@ -134,31 +52,3 @@
};
};
};
&eth0 {
status = "okay";
phy-handle = <&swphy0>;
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-1)>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&uboot 0x1fc00>;
pll-data = <0x06000000 0x00000101 0x00001616>;
gmac-config {
device = <&gmac>;
switch-phy-swap = <1>;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};

View File

@ -1,98 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9341.dtsi"
#include "ar9341_tplink.dtsi"
/ {
model = "TP-Link TL-WR842N/ND v2";
compatible = "tplink,tl-wr842n-v2", "qca,ar9341";
aliases {
serial0 = &uart;
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins>;
reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
system: power {
label = "tp-link:green:power";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan {
label = "tp-link:green:wlan";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
qss {
label = "tp-link:green:qss";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
wan {
label = "tp-link:green:wan";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "tp-link:green:lan1";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "tp-link:green:lan2";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
lan3 {
label = "tp-link:green:lan3";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
lan4 {
label = "tp-link:green:lan4";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
usb {
label = "tp-link:green:usb";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
};
gpio-export {
compatible = "gpio-export";
@ -104,16 +18,22 @@
};
};
&ref {
clock-frequency = <25000000>;
&keys {
reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
&leds {
usb {
label = "tp-link:green:usb";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
};
&spi {
@ -167,31 +87,6 @@
status = "okay";
};
&eth0 {
status = "okay";
phy-handle = <&swphy0>;
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <(-1)>;
};
&eth1 {
status = "okay";
phy-handle = <&swphy4>;
mtd-mac-address = <&uboot 0x1fc00>;
phy-mode = "gmii";
pll-data = <0x06000000 0x00000101 0x00001616>;
gmac-config {
device = <&gmac>;
switch-phy-swap = <1>;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};