mac80211: brcmfmac: backport remaining changes from 4.16

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

package/kernel/mac80211/patches/315-v4.16-0001-brcmfmac-Support-43455-save-restore-SR-feature-if-FW.patch

@@ -0,0 +1,27 @@
+From e3720dad99859251a8b0fe2807275a8afcfb560d Mon Sep 17 00:00:00 2001
+From: Double Lo <double.lo@cypress.com>
+Date: Tue, 19 Dec 2017 14:56:44 +0800
+Subject: [PATCH] brcmfmac: Support 43455 save-restore (SR) feature if FW
+ include -sr
+
+This patch will add 43455 into the save-restore(SR) capable chip list, so
+the SR engine will be enabled with 43455 FW which built-in the -sr
+function.
+
+Signed-off-by: Double Lo <double.lo@cypress.com>
+Signed-off-by: Wright Feng <wright.feng@cypress.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c
+@@ -1338,6 +1338,7 @@ bool brcmf_chip_sr_capable(struct brcmf_
+ 	switch (pub->chip) {
+ 	case BRCM_CC_4354_CHIP_ID:
+ 	case BRCM_CC_4356_CHIP_ID:
++	case BRCM_CC_4345_CHIP_ID:
+ 		/* explicitly check SR engine enable bit */
+ 		pmu_cc3_mask = BIT(2);
+ 		/* fall-through */

package/kernel/mac80211/patches/316-v4.16-0002-brcmfmac-add-comment-block-in-brcmf_sdio_buscore_rea.patch

@@ -0,0 +1,31 @@
+From 32adbcaa5df49f1977441f7a4bf180a0bcfe9966 Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Tue, 9 Jan 2018 13:22:53 +0100
+Subject: [PATCH] brcmfmac: add comment block in brcmf_sdio_buscore_read()
+
+In brcmf_sdio_buscore_read() there is some special handling upon
+register access to chipid register of the chipcommon core. Add
+comment explaining why it is done here.
+
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+@@ -3772,6 +3772,13 @@ static u32 brcmf_sdio_buscore_read32(voi
+ 
+ 	val = brcmf_sdiod_readl(sdiodev, addr, NULL);
+ 
++	/*
++	 * this is a bit of special handling if reading the chipcommon chipid
++	 * register. The 4339 is a next-gen of the 4335. It uses the same
++	 * SDIO device id as 4335 and the chipid register returns 4335 as well.
++	 * It can be identified as 4339 by looking at the chip revision. It
++	 * is corrected here so the chip.c module has the right info.
++	 */
+ 	if (addr == CORE_CC_REG(SI_ENUM_BASE, chipid) &&
+ 	    (sdiodev->func1->device == SDIO_DEVICE_ID_BROADCOM_4339 ||
+ 	     sdiodev->func1->device == SDIO_DEVICE_ID_BROADCOM_4335_4339)) {

package/kernel/mac80211/patches/316-v4.16-0003-brcmfmac-rename-brcmf_sdiod_buff_-read-write-functio.patch

@@ -0,0 +1,137 @@
+From 378f6a16043e5d3346301fc618f503e97aea335b Mon Sep 17 00:00:00 2001
+From: Arend Van Spriel <arend.vanspriel@broadcom.com>
+Date: Tue, 9 Jan 2018 13:22:54 +0100
+Subject: [PATCH] brcmfmac: rename brcmf_sdiod_buff_{read,write}() functions
+
+Rename functions to brcmf_sdio_skbuff_{read,write}() as we pass an
+skbuff to this function.
+
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c  | 48 +++++++++++-----------
+ 1 file changed, 24 insertions(+), 24 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+@@ -292,24 +292,24 @@ out:
+ 		*ret = retval;
+ }
+ 
+-static int brcmf_sdiod_buff_read(struct brcmf_sdio_dev *sdiodev,
+-				 struct sdio_func *func, u32 addr,
+-				 struct sk_buff *pkt)
++static int brcmf_sdiod_skbuff_read(struct brcmf_sdio_dev *sdiodev,
++				   struct sdio_func *func, u32 addr,
++				   struct sk_buff *skb)
+ {
+ 	unsigned int req_sz;
+ 	int err;
+ 
+ 	/* Single skb use the standard mmc interface */
+-	req_sz = pkt->len + 3;
++	req_sz = skb->len + 3;
+ 	req_sz &= (uint)~3;
+ 
+ 	switch (func->num) {
+ 	case 1:
+-		err = sdio_memcpy_fromio(func, ((u8 *)(pkt->data)), addr,
++		err = sdio_memcpy_fromio(func, ((u8 *)(skb->data)), addr,
+ 					 req_sz);
+ 		break;
+ 	case 2:
+-		err = sdio_readsb(func, ((u8 *)(pkt->data)), addr, req_sz);
++		err = sdio_readsb(func, ((u8 *)(skb->data)), addr, req_sz);
+ 		break;
+ 	default:
+ 		/* bail out as things are really fishy here */
+@@ -323,18 +323,18 @@ static int brcmf_sdiod_buff_read(struct
+ 	return err;
+ }
+ 
+-static int brcmf_sdiod_buff_write(struct brcmf_sdio_dev *sdiodev,
+-				  struct sdio_func *func, u32 addr,
+-				  struct sk_buff *pkt)
++static int brcmf_sdiod_skbuff_write(struct brcmf_sdio_dev *sdiodev,
++				    struct sdio_func *func, u32 addr,
++				    struct sk_buff *skb)
+ {
+ 	unsigned int req_sz;
+ 	int err;
+ 
+ 	/* Single skb use the standard mmc interface */
+-	req_sz = pkt->len + 3;
++	req_sz = skb->len + 3;
+ 	req_sz &= (uint)~3;
+ 
+-	err = sdio_memcpy_toio(func, addr, ((u8 *)(pkt->data)), req_sz);
++	err = sdio_memcpy_toio(func, addr, ((u8 *)(skb->data)), req_sz);
+ 
+ 	if (err == -ENOMEDIUM)
+ 		brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_NOMEDIUM);
+@@ -550,7 +550,7 @@ int brcmf_sdiod_recv_pkt(struct brcmf_sd
+ 	addr &= SBSDIO_SB_OFT_ADDR_MASK;
+ 	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+ 
+-	err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func2, addr, pkt);
++	err = brcmf_sdiod_skbuff_read(sdiodev, sdiodev->func2, addr, pkt);
+ 
+ done:
+ 	return err;
+@@ -575,14 +575,14 @@ int brcmf_sdiod_recv_chain(struct brcmf_
+ 	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+ 
+ 	if (pktq->qlen == 1)
+-		err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func2, addr,
+-					    pktq->next);
++		err = brcmf_sdiod_skbuff_read(sdiodev, sdiodev->func2, addr,
++					      pktq->next);
+ 	else if (!sdiodev->sg_support) {
+ 		glom_skb = brcmu_pkt_buf_get_skb(totlen);
+ 		if (!glom_skb)
+ 			return -ENOMEM;
+-		err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func2, addr,
+-					    glom_skb);
++		err = brcmf_sdiod_skbuff_read(sdiodev, sdiodev->func2, addr,
++					      glom_skb);
+ 		if (err)
+ 			goto done;
+ 
+@@ -623,8 +623,8 @@ int brcmf_sdiod_send_buf(struct brcmf_sd
+ 	addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+ 
+ 	if (!err)
+-		err = brcmf_sdiod_buff_write(sdiodev, sdiodev->func2, addr,
+-					     mypkt);
++		err = brcmf_sdiod_skbuff_write(sdiodev, sdiodev->func2, addr,
++					       mypkt);
+ 
+ 	brcmu_pkt_buf_free_skb(mypkt);
+ 
+@@ -649,8 +649,8 @@ int brcmf_sdiod_send_pkt(struct brcmf_sd
+ 
+ 	if (pktq->qlen == 1 || !sdiodev->sg_support) {
+ 		skb_queue_walk(pktq, skb) {
+-			err = brcmf_sdiod_buff_write(sdiodev, sdiodev->func2,
+-						     addr, skb);
++			err = brcmf_sdiod_skbuff_write(sdiodev, sdiodev->func2,
++						       addr, skb);
+ 			if (err)
+ 				break;
+ 		}
+@@ -706,11 +706,11 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev
+ 
+ 		if (write) {
+ 			memcpy(pkt->data, data, dsize);
+-			err = brcmf_sdiod_buff_write(sdiodev, sdiodev->func1,
+-						     sdaddr, pkt);
++			err = brcmf_sdiod_skbuff_write(sdiodev, sdiodev->func1,
++						       sdaddr, pkt);
+ 		} else {
+-			err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func1,
+-						    sdaddr, pkt);
++			err = brcmf_sdiod_skbuff_read(sdiodev, sdiodev->func1,
++						      sdaddr, pkt);
+ 		}
+ 
+ 		if (err) {

package/kernel/mac80211/patches/317-v4.16-0001-brcmfmac-Use-zeroing-memory-allocator-than-allocator.patch

@@ -0,0 +1,59 @@
+From b7acadaf038740c43515dc1548f43d01cc92823a Mon Sep 17 00:00:00 2001
+From: Himanshu Jha <himanshujha199640@gmail.com>
+Date: Tue, 9 Jan 2018 02:15:31 +0530
+Subject: [PATCH] brcmfmac: Use zeroing memory allocator than allocator/memset
+
+Use dma_zalloc_coherent for allocating zeroed
+memory and remove unnecessary memset function.
+
+Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci
+
+Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org>
+Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ .../net/wireless/broadcom/brcm80211/brcmfmac/pcie.c  | 20 ++++++++++----------
+ 1 file changed, 10 insertions(+), 10 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+@@ -1251,14 +1251,14 @@ static int brcmf_pcie_init_scratchbuffer
+ 	u64 address;
+ 	u32 addr;
+ 
+-	devinfo->shared.scratch = dma_alloc_coherent(&devinfo->pdev->dev,
+-		BRCMF_DMA_D2H_SCRATCH_BUF_LEN,
+-		&devinfo->shared.scratch_dmahandle, GFP_KERNEL);
++	devinfo->shared.scratch =
++		dma_zalloc_coherent(&devinfo->pdev->dev,
++					BRCMF_DMA_D2H_SCRATCH_BUF_LEN,
++					&devinfo->shared.scratch_dmahandle,
++					GFP_KERNEL);
+ 	if (!devinfo->shared.scratch)
+ 		goto fail;
+ 
+-	memset(devinfo->shared.scratch, 0, BRCMF_DMA_D2H_SCRATCH_BUF_LEN);
+-
+ 	addr = devinfo->shared.tcm_base_address +
+ 	       BRCMF_SHARED_DMA_SCRATCH_ADDR_OFFSET;
+ 	address = (u64)devinfo->shared.scratch_dmahandle;
+@@ -1268,14 +1268,14 @@ static int brcmf_pcie_init_scratchbuffer
+ 	       BRCMF_SHARED_DMA_SCRATCH_LEN_OFFSET;
+ 	brcmf_pcie_write_tcm32(devinfo, addr, BRCMF_DMA_D2H_SCRATCH_BUF_LEN);
+ 
+-	devinfo->shared.ringupd = dma_alloc_coherent(&devinfo->pdev->dev,
+-		BRCMF_DMA_D2H_RINGUPD_BUF_LEN,
+-		&devinfo->shared.ringupd_dmahandle, GFP_KERNEL);
++	devinfo->shared.ringupd =
++		dma_zalloc_coherent(&devinfo->pdev->dev,
++					BRCMF_DMA_D2H_RINGUPD_BUF_LEN,
++					&devinfo->shared.ringupd_dmahandle,
++					GFP_KERNEL);
+ 	if (!devinfo->shared.ringupd)
+ 		goto fail;
+ 
+-	memset(devinfo->shared.ringupd, 0, BRCMF_DMA_D2H_RINGUPD_BUF_LEN);
+-
+ 	addr = devinfo->shared.tcm_base_address +
+ 	       BRCMF_SHARED_DMA_RINGUPD_ADDR_OFFSET;
+ 	address = (u64)devinfo->shared.ringupd_dmahandle;