mirror of
https://github.com/openwrt/openwrt.git
synced 2025-04-07 19:34:48 +00:00
ramips: add support for ASUS RT-AX54
Specifications:
- Device: ASUS RT-AX54 (AX1800S/HP,AX54HP)
- SoC: MT7621AT
- Flash: 128MB
- RAM: 256MB
- Switch: 1 WAN, 4 LAN (10/100/1000 Mbps)
- WiFi: MT7905 2x2 2.4G + MT7975 2x2 5G
- LEDs: 1x POWER (blue, configurable)
1x LAN (blue, configurable)
1x WAN (blue, configurable)
1x 2.4G (blue, not configurable)
1x 5G (blue, not configurable)
Flash by U-Boot TFTP method:
- Configure your PC with IP 192.168.1.2
- Set up TFTP server and put the factory.bin image on your PC
- Connect serial port(rate:115200) and turn on AP, then interrupt "U-Boot Boot Menu" by hitting any key
Select "2. Upgrade firmware"
Press enter when show "Run firmware after upgrading? (Y/n):"
Select 0 for TFTP method
Input U-Boot's IP address: 192.168.1.1
Input TFTP server's IP address: 192.168.1.2
Input IP netmask: 255.255.255.0
Input file name: openwrt-ramips-mt7621-asus_rt-ax1800hp-squashfs-factory.bin
- Restart AP aftre see the log "Firmware upgrade completed!"
Signed-off-by: Karl Chan <exkc@exkc.moe>
This commit is contained in:
Karl Chan
Hauke Mehrtens
parent
51982560a9
commit
92276eef70
@ -53,6 +53,7 @@ zte,mf283plus)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x10000"
|
||||
;;
|
||||
asus,rt-ax53u|\
|
||||
asus,rt-ax54|\
|
||||
belkin,rt1800|\
|
||||
h3c,tx1800-plus|\
|
||||
h3c,tx1801-plus|\
|
||||
|
||||
186
target/linux/ramips/dts/mt7621_asus_rt-ax54.dts
Normal file
186
target/linux/ramips/dts/mt7621_asus_rt-ax54.dts
Normal file
@ -0,0 +1,186 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
compatible = "asus,rt-ax54", "mediatek,mt7621-soc";
|
||||
model = "ASUS RT-AX54";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
label-mac-device = &gmac0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
bootargs-override = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power: power {
|
||||
label = "blue:power";
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_POWER;
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
key-restart {
|
||||
label = "reset";
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
key-wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
|
||||
mediatek,nmbm;
|
||||
mediatek,bmt-max-ratio = <1>;
|
||||
mediatek,bmt-max-reserved-blocks = <64>;
|
||||
mediatek,bmt-remap-range = <0x000000 0x7e0000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
/*
|
||||
* u-boot gets split here while keeping u-boot read-only,
|
||||
* which allows safe usage of fw_setenv
|
||||
*/
|
||||
partition@80000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x80000 0x60000>;
|
||||
};
|
||||
|
||||
partition@e0000 {
|
||||
label = "nvram";
|
||||
reg = <0xe0000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@1e0000 {
|
||||
label = "factory";
|
||||
reg = <0x1e0000 0x100000>;
|
||||
read-only;
|
||||
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_factory_4: macaddr@4 {
|
||||
reg = <0x4 0x6>;
|
||||
};
|
||||
};
|
||||
|
||||
factory2: partition@2e0000 {
|
||||
label = "factory2";
|
||||
reg = <0x2e0000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3e0000 {
|
||||
label = "kernel";
|
||||
reg = <0x3e0000 0x400000>;
|
||||
};
|
||||
|
||||
partition@7e0000 {
|
||||
label = "ubi";
|
||||
reg = <0x7e0000 0x7020000>;
|
||||
};
|
||||
|
||||
/* Last 8M are reserved for NMBM management (bad blocks) */
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0000>;
|
||||
mediatek,disable-radar-background;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
nvmem-cells = <&macaddr_factory_4>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
label = "wan";
|
||||
phy-handle = <ðphy4>;
|
||||
|
||||
nvmem-cells = <&macaddr_factory_4>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&mdio {
|
||||
ethphy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@0 {
|
||||
status = "okay";
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
status = "okay";
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
status = "okay";
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
status = "okay";
|
||||
label = "lan1";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "i2c", "uart2", "uart3", "jtag", "wdt";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
@ -338,6 +338,31 @@ define Device/asus_rt-ax53u
|
||||
endef
|
||||
TARGET_DEVICES += asus_rt-ax53u
|
||||
|
||||
define Device/asus_rt-ax54
|
||||
$(Device/dsa-migration)
|
||||
DEVICE_VENDOR := ASUS
|
||||
DEVICE_MODEL := RT-AX54
|
||||
DEVICE_ALT0_VENDOR := ASUS
|
||||
DEVICE_ALT0_MODEL := RT-AX54
|
||||
DEVICE_ALT1_VENDOR := ASUS
|
||||
DEVICE_ALT1_MODEL := RT-AX54HP
|
||||
DEVICE_ALT2_VENDOR := ASUS
|
||||
DEVICE_ALT2_MODEL := RT-AX1800HP
|
||||
DEVICE_ALT3_VENDOR := ASUS
|
||||
DEVICE_ALT3_MODEL := RT-AX1800S
|
||||
IMAGE_SIZE := 51200k
|
||||
UBINIZE_OPTS := -E 5
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
KERNEL_SIZE := 4096k
|
||||
IMAGES += factory.bin
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
|
||||
check-size
|
||||
DEVICE_PACKAGES := kmod-mt7915-firmware uboot-envtools
|
||||
endef
|
||||
TARGET_DEVICES += asus_rt-ax54
|
||||
|
||||
define Device/beeline_smartbox-flash
|
||||
$(Device/dsa-migration)
|
||||
$(Device/uimage-lzma-loader)
|
||||
|
||||
@ -24,6 +24,10 @@ asus,rt-ax53u)
|
||||
ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "mt76-phy0" "phy0tpt"
|
||||
ucidef_set_led_wlan "wlan5g" "WiFi 5GHz" "mt76-phy1" "phy1tpt"
|
||||
;;
|
||||
asus,rt-ax54)
|
||||
ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "mt76-phy0" "phy0tpt"
|
||||
ucidef_set_led_wlan "wlan5g" "WiFi 5GHz" "mt76-phy1" "phy1tpt"
|
||||
;;
|
||||
asus,rt-n56u-b1)
|
||||
ucidef_set_led_netdev "lan" "LAN link" "blue:lan" "br-lan"
|
||||
ucidef_set_led_netdev "wan" "WAN link" "blue:wan" "wan"
|
||||
|
||||
@ -56,6 +56,7 @@ platform_do_upgrade() {
|
||||
asus,rt-ac65p|\
|
||||
asus,rt-ac85p|\
|
||||
asus,rt-ax53u|\
|
||||
asus,rt-ax54|\
|
||||
beeline,smartbox-flash|\
|
||||
beeline,smartbox-giga|\
|
||||
beeline,smartbox-turbo|\
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user