From 8f38048f1fc4763f04cdac6ee974981c23cfa1d5 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 7 Apr 2008 07:29:37 +0000 Subject: [PATCH] Migrate rt2x00 to the compat-wireless version SVN-Revision: 10753 --- package/mac80211/Makefile | 141 +- package/rt2x00/Makefile | 180 -- package/rt2x00/src/COPYING | 340 ---- package/rt2x00/src/Makefile | 150 -- package/rt2x00/src/README | 548 ------ package/rt2x00/src/THANKS | 54 - package/rt2x00/src/rt2400pci.c | 1664 ----------------- package/rt2x00/src/rt2400pci.h | 943 ---------- package/rt2x00/src/rt2500pci.c | 1971 -------------------- package/rt2x00/src/rt2500pci.h | 1236 ------------- package/rt2x00/src/rt2500usb.c | 1831 ------------------- package/rt2x00/src/rt2500usb.h | 798 --------- package/rt2x00/src/rt2x00.h | 845 --------- package/rt2x00/src/rt2x00_compat.h | 66 - package/rt2x00/src/rt2x00config.c | 205 --- package/rt2x00/src/rt2x00debug.c | 368 ---- package/rt2x00/src/rt2x00debug.h | 57 - package/rt2x00/src/rt2x00dev.c | 1202 ------------- package/rt2x00/src/rt2x00dev.h | 60 - package/rt2x00/src/rt2x00firmware.c | 124 -- package/rt2x00/src/rt2x00firmware.h | 49 - package/rt2x00/src/rt2x00lib.h | 119 -- package/rt2x00/src/rt2x00mac.c | 446 ----- package/rt2x00/src/rt2x00pci.c | 486 ----- package/rt2x00/src/rt2x00pci.h | 127 -- package/rt2x00/src/rt2x00reg.h | 292 --- package/rt2x00/src/rt2x00rfkill.c | 146 -- package/rt2x00/src/rt2x00rfkill.h | 51 - package/rt2x00/src/rt2x00ring.h | 268 --- package/rt2x00/src/rt2x00usb.c | 615 ------- package/rt2x00/src/rt2x00usb.h | 180 -- package/rt2x00/src/rt61pci.c | 2569 --------------------------- package/rt2x00/src/rt61pci.h | 1457 --------------- package/rt2x00/src/rt73usb.c | 2111 ---------------------- package/rt2x00/src/rt73usb.h | 1024 ----------- 35 files changed, 139 insertions(+), 22584 deletions(-) delete mode 100644 package/rt2x00/Makefile delete mode 100644 package/rt2x00/src/COPYING delete mode 100644 package/rt2x00/src/Makefile delete mode 100644 package/rt2x00/src/README delete mode 100644 package/rt2x00/src/THANKS delete mode 100644 package/rt2x00/src/rt2400pci.c delete mode 100644 package/rt2x00/src/rt2400pci.h delete mode 100644 package/rt2x00/src/rt2500pci.c delete mode 100644 package/rt2x00/src/rt2500pci.h delete mode 100644 package/rt2x00/src/rt2500usb.c delete mode 100644 package/rt2x00/src/rt2500usb.h delete mode 100644 package/rt2x00/src/rt2x00.h delete mode 100644 package/rt2x00/src/rt2x00_compat.h delete mode 100644 package/rt2x00/src/rt2x00config.c delete mode 100644 package/rt2x00/src/rt2x00debug.c delete mode 100644 package/rt2x00/src/rt2x00debug.h delete mode 100644 package/rt2x00/src/rt2x00dev.c delete mode 100644 package/rt2x00/src/rt2x00dev.h delete mode 100644 package/rt2x00/src/rt2x00firmware.c delete mode 100644 package/rt2x00/src/rt2x00firmware.h delete mode 100644 package/rt2x00/src/rt2x00lib.h delete mode 100644 package/rt2x00/src/rt2x00mac.c delete mode 100644 package/rt2x00/src/rt2x00pci.c delete mode 100644 package/rt2x00/src/rt2x00pci.h delete mode 100644 package/rt2x00/src/rt2x00reg.h delete mode 100644 package/rt2x00/src/rt2x00rfkill.c delete mode 100644 package/rt2x00/src/rt2x00rfkill.h delete mode 100644 package/rt2x00/src/rt2x00ring.h delete mode 100644 package/rt2x00/src/rt2x00usb.c delete mode 100644 package/rt2x00/src/rt2x00usb.h delete mode 100644 package/rt2x00/src/rt61pci.c delete mode 100644 package/rt2x00/src/rt61pci.h delete mode 100644 package/rt2x00/src/rt73usb.c delete mode 100644 package/rt2x00/src/rt73usb.h diff --git a/package/mac80211/Makefile b/package/mac80211/Makefile index b8008d71f93..12a177b4e8d 100644 --- a/package/mac80211/Makefile +++ b/package/mac80211/Makefile @@ -33,12 +33,128 @@ define KernelPackage/mac80211/description Linux 802.11 Wireless Networking Stack endef -CONFOPTS:=MAC80211 CFG80211 NL80211 MAC80211_RC_DEFAULT_PID MAC80211_RC_PID +# Ralink rt2x00 drivers +RT61FW:=RT61_Firmware_V1.2.zip +RT71FW:=RT71W_Firmware_V1.8.zip + +define Download/rt61 + FILE:=$(RT61FW) + URL:=http://www.ralinktech.com.tw/data/ + MD5SUM:=d4c690c93b470bc9a681297c2adc6281 +endef +$(eval $(call Download,rt61)) + +define Download/rt71w + FILE:=$(RT71FW) + URL:=http://www.ralinktech.com.tw/data/ + MD5SUM:=1e7a5dc574e0268574fcda3fd5cf52f7 +endef +$(eval $(call Download,rt71w)) + +define KernelPackage/rt2x00/Default + SUBMENU:=Wireless Drivers + TITLE:=Ralink Drivers for RT2x00 cards + DEPENDS:=@LINUX_2_6_24 @!TARGET_atheros @!TARGET_uml +endef + +define KernelPackage/rt2x00-lib +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @PCI_SUPPORT||USB_SUPPORT +kmod-mac80211 + TITLE+= (LIB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00lib.$(LINUX_KMOD_SUFFIX) + AUTOLOAD:=$(call AutoLoad,25,blkcipher ecb arc4 rt2x00lib) +endef + +define KernelPackage/rt2x00-pci +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-lib +kmod-eeprom-93cx6 + TITLE+= (PCI) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00pci.$(LINUX_KMOD_SUFFIX) + AUTOLOAD:=$(call AutoLoad,26,rt2x00pci) +endef + +define KernelPackage/rt2x00-usb +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @USB_SUPPORT +kmod-rt2x00-lib +kmod-usb-core + TITLE+= (USB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00usb.$(LINUX_KMOD_SUFFIX) + AUTOLOAD:=$(call AutoLoad,26,rt2x00usb) +endef + +define KernelPackage/rt2400-pci +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci + TITLE+= (RT2400 PCI) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2400pci.$(LINUX_KMOD_SUFFIX) + AUTOLOAD:=$(call AutoLoad,27,rt2400pci) +endef + +define KernelPackage/rt2500-pci +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci + TITLE+= (RT2500 PCI) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2500pci.$(LINUX_KMOD_SUFFIX) + AUTOLOAD:=$(call AutoLoad,27,rt2500pci) +endef + +define KernelPackage/rt2500-usb +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +kmod-crc-itu-t + TITLE+= (RT2500 USB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2500usb.$(LINUX_KMOD_SUFFIX) + AUTOLOAD:=$(call AutoLoad,27,rt2500usb) +endef + +define KernelPackage/rt61-pci +$(call KernelPackage/rt2x00/Default) + DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +kmod-crc-itu-t + TITLE+= (RT2x61 PCI) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt61pci.$(LINUX_KMOD_SUFFIX) + AUTOLOAD:=$(call AutoLoad,27,rt61pci) +endef + +define KernelPackage/rt73-usb + $(call KernelPackage/rt2x00/Default) + DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb + TITLE+= (RT73 USB) + FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt73usb.$(LINUX_KMOD_SUFFIX) + AUTOLOAD:=$(call AutoLoad,27,rt73usb) +endef + +RT2X00_CONFOPTS:=CONFIG_RT2X00=y \ + CONFIG_RT2X00_DEBUG=y \ + CONFIG_RT2X00_LIB_FIRMWARE=y \ + CONFIG_RT2X00_LIB_LEDS=y + +ifneq ($(CONFIG_PACKAGE_kmod-rt2x00-pci),) + RT2X00_CONFOPTS+= CONFIG_RT2X00_LIB_PCI=y +endif +ifneq ($(CONFIG_PACKAGE_kmod-rt2x00-usb),) + RT2X00_CONFOPTS+= CONFIG_RT2X00_LIB_USB=y +endif +ifneq ($(CONFIG_PACKAGE_kmod-rt2400-pci),) + RT2X00_CONFOPTS+= CONFIG_RT2400PCI=y +endif +ifneq ($(CONFIG_PACKAGE_kmod-rt2500-pci),) + RT2X00_CONFOPTS+= CONFIG_RT2500PCI=y +endif +ifneq ($(CONFIG_PACKAGE_kmod-rt2500-usb),) + RT2X00_CONFOPTS+= CONFIG_RT2500USB=y +endif +ifneq ($(CONFIG_PACKAGE_kmod-rt61-pci),) + RT2X00_CONFOPTS+= CONFIG_RT61PCI=y +endif +ifneq ($(CONFIG_PACKAGE_kmod-rt73-usb),) + RT2X00_CONFOPTS+= CONFIG_RT73USB=y +endif + + +CONFOPTS:=MAC80211 CFG80211 NL80211 MAC80211_RC_DEFAULT_PID MAC80211_RC_PID \ BUILDFLAGS:= \ $(foreach opt,$(CONFOPTS),-DCONFIG_$(opt)) \ $(if $(CONFIG_LEDS_TRIGGERS), -DCONFIG_MAC80211_LEDS -DCONFIG_LEDS_TRIGGERS) \ - -D__CONFIG_MAC80211_RC_DEFAULT=pid + -D__CONFIG_MAC80211_RC_DEFAULT=pid \ MAKE_OPTS:= \ CROSS_COMPILE="$(TARGET_CROSS)" \ @@ -56,6 +172,8 @@ define Build/Prepare mkdir -p $(PKG_BUILD_DIR) $(PKG_UNPACK) $(if $(QUILT),touch $(PKG_BUILD_DIR)/.quilt_used) + unzip -jod $(PKG_BUILD_DIR) $(DL_DIR)/$(RT61FW) + unzip -jod $(PKG_BUILD_DIR) $(DL_DIR)/$(RT71FW) endef define Build/Compile @@ -72,4 +190,23 @@ define KernelPackage/mac80211/install $(INSTALL_DATA) ./files/lib/wifi/mac80211.sh $(1)/lib/wifi endef +define KernelPackage/rt61-pci/install + $(INSTALL_DIR) $(1)/lib/firmware + $(INSTALL_DATA) $(PKG_BUILD_DIR)/rt2?61*.bin $(1)/lib/firmware/ +endef + +define KernelPackage/rt73-usb/install + $(INSTALL_DIR) $(1)/lib/firmware + $(INSTALL_DATA) $(PKG_BUILD_DIR)/rt73.bin $(1)/lib/firmware/ +endef + + $(eval $(call KernelPackage,mac80211)) +$(eval $(call KernelPackage,rt2x00-lib)) +$(eval $(call KernelPackage,rt2x00-pci)) +$(eval $(call KernelPackage,rt2x00-usb)) +$(eval $(call KernelPackage,rt2400-pci)) +$(eval $(call KernelPackage,rt2500-pci)) +$(eval $(call KernelPackage,rt2500-usb)) +$(eval $(call KernelPackage,rt61-pci)) +$(eval $(call KernelPackage,rt73-usb)) diff --git a/package/rt2x00/Makefile b/package/rt2x00/Makefile deleted file mode 100644 index 940ef9b1bf0..00000000000 --- a/package/rt2x00/Makefile +++ /dev/null @@ -1,180 +0,0 @@ -# -# Copyright (C) 2007 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -# $Id: $ - -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/kernel.mk - -PKG_NAME:=rt2x00 -PKG_VERSION:=$(KERNEL_VERSION) - -include $(INCLUDE_DIR)/package.mk - - -RT61FW:=RT61_Firmware_V1.2.zip -RT71FW:=RT71W_Firmware_V1.8.zip - -define Download/rt61 - FILE:=$(RT61FW) - URL:=http://www.ralinktech.com.tw/data/ - MD5SUM:=d4c690c93b470bc9a681297c2adc6281 -endef -$(eval $(call Download,rt61)) - -define Download/rt71w - FILE:=$(RT71FW) - URL:=http://www.ralinktech.com.tw/data/ - MD5SUM:=1e7a5dc574e0268574fcda3fd5cf52f7 -endef -$(eval $(call Download,rt71w)) - -# XXX: remove @!TARGET_* later when we have PCI & USB support properly detected on all targets -define KernelPackage/rt2x00/Default - SUBMENU:=Wireless Drivers - TITLE:=Ralink Drivers for RT2x00 cards - DEPENDS:=@LINUX_2_6_24 @!TARGET_atheros @!TARGET_uml -endef - -define KernelPackage/rt2x00-lib -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT||USB_SUPPORT +kmod-mac80211 - TITLE+= (LIB) - FILES:=$(PKG_BUILD_DIR)/rt2x00lib.$(LINUX_KMOD_SUFFIX) - AUTOLOAD:=$(call AutoLoad,25,blkcipher ecb arc4 rt2x00lib) -endef - -define KernelPackage/rt2x00-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-lib +kmod-eeprom-93cx6 - TITLE+= (PCI) - FILES:=$(PKG_BUILD_DIR)/rt2x00pci.$(LINUX_KMOD_SUFFIX) - AUTOLOAD:=$(call AutoLoad,26,rt2x00pci) -endef - -define KernelPackage/rt2x00-usb -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @USB_SUPPORT +kmod-rt2x00-lib +kmod-usb-core - TITLE+= (USB) - FILES:=$(PKG_BUILD_DIR)/rt2x00usb.$(LINUX_KMOD_SUFFIX) - AUTOLOAD:=$(call AutoLoad,26,rt2x00usb) -endef - -define KernelPackage/rt2400-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci - TITLE+= (RT2400 PCI) - FILES:=$(PKG_BUILD_DIR)/rt2400pci.$(LINUX_KMOD_SUFFIX) - AUTOLOAD:=$(call AutoLoad,27,rt2400pci) -endef - -define KernelPackage/rt2500-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci - TITLE+= (RT2500 PCI) - FILES:=$(PKG_BUILD_DIR)/rt2500pci.$(LINUX_KMOD_SUFFIX) - AUTOLOAD:=$(call AutoLoad,27,rt2500pci) -endef - -define KernelPackage/rt2500-usb -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +kmod-crc-itu-t - TITLE+= (RT2500 USB) - FILES:=$(PKG_BUILD_DIR)/rt2500usb.$(LINUX_KMOD_SUFFIX) - AUTOLOAD:=$(call AutoLoad,27,rt2500usb) -endef - -define KernelPackage/rt61-pci -$(call KernelPackage/rt2x00/Default) - DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +kmod-crc-itu-t - TITLE+= (RT2x61 PCI) - FILES:=$(PKG_BUILD_DIR)/rt61pci.$(LINUX_KMOD_SUFFIX) - AUTOLOAD:=$(call AutoLoad,27,rt61pci) -endef - -define KernelPackage/rt73-usb - $(call KernelPackage/rt2x00/Default) - DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb - TITLE+= (RT73 USB) - FILES:=$(PKG_BUILD_DIR)/rt73usb.$(LINUX_KMOD_SUFFIX) - AUTOLOAD:=$(call AutoLoad,27,rt73usb) -endef - -$(STAMP_PREPARED): $(DL_DIR)/$(PKG_FW6X_NAME) $(DL_DIR)/$(PKG_FW7X_NAME) - -PKG_EXTRA_KCONFIG:= \ - CONFIG_MAC80211=y \ - CONFIG_RT2X00=y \ - CONFIG_RT2X00_DEBUG=y \ - CONFIG_RT2X00_LIB_FIRMWARE=y \ - -ifneq ($(CONFIG_PACKAGE_kmod-rt2x00-pci),) - PKG_EXTRA_KCONFIG+= CONFIG_RT2X00PCI=y -endif -ifneq ($(CONFIG_PACKAGE_kmod-rt2x00-usb),) - PKG_EXTRA_KCONFIG+= CONFIG_RT2X00USB=y -endif -ifneq ($(CONFIG_PACKAGE_kmod-rt2400-pci),) - PKG_EXTRA_KCONFIG+= CONFIG_RT2400PCI=y -endif -ifneq ($(CONFIG_PACKAGE_kmod-rt2500-pci),) - PKG_EXTRA_KCONFIG+= CONFIG_RT2500PCI=y -endif -ifneq ($(CONFIG_PACKAGE_kmod-rt2500-usb),) - PKG_EXTRA_KCONFIG+= CONFIG_RT2500USB=y -endif -ifneq ($(CONFIG_PACKAGE_kmod-rt61-pci),) - PKG_EXTRA_KCONFIG+= CONFIG_RT61PCI=y -endif -ifneq ($(CONFIG_PACKAGE_kmod-rt73-usb),) - PKG_EXTRA_KCONFIG+= CONFIG_RT73USB=y -endif - -PKG_EXTRA_CFLAGS:= \ - -I$(STAGING_DIR)/usr/include/mac80211 \ - $(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=m,%,$(filter %=m,$(PKG_EXTRA_KCONFIG)))) \ - $(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=y,%,$(filter %=y,$(PKG_EXTRA_KCONFIG)))) \ - -define Build/Prepare - $(call Build/Prepare/Default) - $(CP) src/* $(PKG_BUILD_DIR)/ - unzip -jod $(PKG_BUILD_DIR) $(DL_DIR)/$(RT61FW) - unzip -jod $(PKG_BUILD_DIR) $(DL_DIR)/$(RT71FW) -endef - -define Build/Configure - touch $(PKG_BUILD_DIR)/rt2x00_config.h -endef - -define Build/Compile - $(MAKE) -C "$(LINUX_DIR)" \ - ARCH="$(LINUX_KARCH)" \ - CROSS_COMPILE="$(TARGET_CROSS)" \ - SUBDIRS="$(PKG_BUILD_DIR)" \ - $(PKG_EXTRA_KCONFIG) \ - EXTRA_CFLAGS="$(PKG_EXTRA_CFLAGS)" \ - V="$(V)" \ - modules -endef - -define KernelPackage/rt61-pci/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(PKG_BUILD_DIR)/rt2?61*.bin $(1)/lib/firmware/ -endef - -define KernelPackage/rt73-usb/install - $(INSTALL_DIR) $(1)/lib/firmware - $(INSTALL_DATA) $(PKG_BUILD_DIR)/rt73.bin $(1)/lib/firmware/ -endef - -$(eval $(call KernelPackage,rt2x00-lib)) -$(eval $(call KernelPackage,rt2x00-pci)) -$(eval $(call KernelPackage,rt2x00-usb)) -$(eval $(call KernelPackage,rt2400-pci)) -$(eval $(call KernelPackage,rt2500-pci)) -$(eval $(call KernelPackage,rt2500-usb)) -$(eval $(call KernelPackage,rt61-pci)) -$(eval $(call KernelPackage,rt73-usb)) diff --git a/package/rt2x00/src/COPYING b/package/rt2x00/src/COPYING deleted file mode 100644 index 5b6e7c66c27..00000000000 --- a/package/rt2x00/src/COPYING +++ /dev/null @@ -1,340 +0,0 @@ - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 - - Copyright (C) 1989, 1991 Free Software Foundation, Inc. - 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -License is intended to guarantee your freedom to share and change free -software--to make sure the software is free for all its users. This -General Public License applies to most of the Free Software -Foundation's software and to any other program whose authors commit to -using it. (Some other Free Software Foundation software is covered by -the GNU Library General Public License instead.) You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -this service if you wish), that you receive source code or can get it -if you want it, that you can change the software or use pieces of it -in new free programs; and that you know you can do these things. - - To protect your rights, we need to make restrictions that forbid -anyone to deny you these rights or to ask you to surrender the rights. -These restrictions translate to certain responsibilities for you if you -distribute copies of the software, or if you modify it. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must show them these terms so they know their -rights. - - We protect your rights with two steps: (1) copyright the software, and -(2) offer you this license which gives you legal permission to copy, -distribute and/or modify the software. - - Also, for each author's protection and ours, we want to make certain -that everyone understands that there is no warranty for this free -software. If the software is modified by someone else and passed on, we -want its recipients to know that what they have is not the original, so -that any problems introduced by others will not reflect on the original -authors' reputations. - - Finally, any free program is threatened constantly by software -patents. We wish to avoid the danger that redistributors of a free -program will individually obtain patent licenses, in effect making the -program proprietary. To prevent this, we have made it clear that any -patent must be licensed for everyone's free use or not licensed at all. - - The precise terms and conditions for copying, distribution and -modification follow. - - GNU GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License applies to any program or other work which contains -a notice placed by the copyright holder saying it may be distributed -under the terms of this General Public License. The "Program", below, -refers to any such program or work, and a "work based on the Program" -means either the Program or any derivative work under copyright law: -that is to say, a work containing the Program or a portion of it, -either verbatim or with modifications and/or translated into another -language. (Hereinafter, translation is included without limitation in -the term "modification".) Each licensee is addressed as "you". - -Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running the Program is not restricted, and the output from the Program -is covered only if its contents constitute a work based on the -Program (independent of having been made by running the Program). -Whether that is true depends on what the Program does. - - 1. You may copy and distribute verbatim copies of the Program's -source code as you receive it, in any medium, provided that you -conspicuously and appropriately publish on each copy an appropriate -copyright notice and disclaimer of warranty; keep intact all the -notices that refer to this License and to the absence of any warranty; -and give any other recipients of the Program a copy of this License -along with the Program. - -You may charge a fee for the physical act of transferring a copy, and -you may at your option offer warranty protection in exchange for a fee. - - 2. You may modify your copy or copies of the Program or any portion -of it, thus forming a work based on the Program, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) You must cause the modified files to carry prominent notices - stating that you changed the files and the date of any change. - - b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any - part thereof, to be licensed as a whole at no charge to all third - parties under the terms of this License. - - c) If the modified program normally reads commands interactively - when run, you must cause it, when started running for such - interactive use in the most ordinary way, to print or display an - announcement including an appropriate copyright notice and a - notice that there is no warranty (or else, saying that you provide - a warranty) and that users may redistribute the program under - these conditions, and telling the user how to view a copy of this - License. (Exception: if the Program itself is interactive but - does not normally print such an announcement, your work based on - the Program is not required to print an announcement.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Program, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Program, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Program. - -In addition, mere aggregation of another work not based on the Program -with the Program (or with a work based on the Program) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may copy and distribute the Program (or a work based on it, -under Section 2) in object code or executable form under the terms of -Sections 1 and 2 above provided that you also do one of the following: - - a) Accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of Sections - 1 and 2 above on a medium customarily used for software interchange; or, - - b) Accompany it with a written offer, valid for at least three - years, to give any third party, for a charge no more than your - cost of physically performing source distribution, a complete - machine-readable copy of the corresponding source code, to be - distributed under the terms of Sections 1 and 2 above on a medium - customarily used for software interchange; or, - - c) Accompany it with the information you received as to the offer - to distribute corresponding source code. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form with such - an offer, in accord with Subsection b above.) - -The source code for a work means the preferred form of the work for -making modifications to it. For an executable work, complete source -code means all the source code for all modules it contains, plus any -associated interface definition files, plus the scripts used to -control compilation and installation of the executable. However, as a -special exception, the source code distributed need not include -anything that is normally distributed (in either source or binary -form) with the major components (compiler, kernel, and so on) of the -operating system on which the executable runs, unless that component -itself accompanies the executable. - -If distribution of executable or object code is made by offering -access to copy from a designated place, then offering equivalent -access to copy the source code from the same place counts as -distribution of the source code, even though third parties are not -compelled to copy the source along with the object code. - - 4. You may not copy, modify, sublicense, or distribute the Program -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense or distribute the Program is -void, and will automatically terminate your rights under this License. -However, parties who have received copies, or rights, from you under -this License will not have their licenses terminated so long as such -parties remain in full compliance. - - 5. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Program or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Program (or any work based on the -Program), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Program or works based on it. - - 6. Each time you redistribute the Program (or any work based on the -Program), the recipient automatically receives a license from the -original licensor to copy, distribute or modify the Program subject to -these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties to -this License. - - 7. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Program at all. For example, if a patent -license would not permit royalty-free redistribution of the Program by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Program. - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended to -apply and the section as a whole is intended to apply in other -circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system, which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 8. If the distribution and/or use of the Program is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Program under this License -may add an explicit geographical distribution limitation excluding -those countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - 9. The Free Software Foundation may publish revised and/or new versions -of the General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - -Each version is given a distinguishing version number. If the Program -specifies a version number of this License which applies to it and "any -later version", you have the option of following the terms and conditions -either of that version or of any later version published by the Free -Software Foundation. If the Program does not specify a version number of -this License, you may choose any version ever published by the Free Software -Foundation. - - 10. If you wish to incorporate parts of the Program into other free -programs whose distribution conditions are different, write to the author -to ask for permission. For software which is copyrighted by the Free -Software Foundation, write to the Free Software Foundation; we sometimes -make exceptions for this. Our decision will be guided by the two goals -of preserving the free status of all derivatives of our free software and -of promoting the sharing and reuse of software generally. - - NO WARRANTY - - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -REPAIR OR CORRECTION. - - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -convey the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - - Copyright (C) - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - -Also add information on how to contact you by electronic and paper mail. - -If the program is interactive, make it output a short notice like this -when it starts in an interactive mode: - - Gnomovision version 69, Copyright (C) year name of author - Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, the commands you use may -be called something other than `show w' and `show c'; they could even be -mouse-clicks or menu items--whatever suits your program. - -You should also get your employer (if you work as a programmer) or your -school, if any, to sign a "copyright disclaimer" for the program, if -necessary. Here is a sample; alter the names: - - Yoyodyne, Inc., hereby disclaims all copyright interest in the program - `Gnomovision' (which makes passes at compilers) written by James Hacker. - - , 1 April 1989 - Ty Coon, President of Vice - -This General Public License does not permit incorporating your program into -proprietary programs. If your program is a subroutine library, you may -consider it more useful to permit linking proprietary applications with the -library. If this is what you want to do, use the GNU Library General -Public License instead of this License. diff --git a/package/rt2x00/src/Makefile b/package/rt2x00/src/Makefile deleted file mode 100644 index 3aeb4058fed..00000000000 --- a/package/rt2x00/src/Makefile +++ /dev/null @@ -1,150 +0,0 @@ -# Copyright (C) 2004 - 2007 rt2x00 SourceForge Project -# -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the -# Free Software Foundation, Inc., -# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - -# Module: Makefile -# Abstract: Makefile for rt2x00 kernel module - -# -# Set the enviroment variables. -# -ifndef SUBDIRS - SUBDIRS=$(shell pwd) -endif - -ifdef KERNDIR - KERNEL_SOURCES := $(KERNDIR) -else - KERNEL_SOURCES := /lib/modules/$(shell uname -r)/build -endif - -ifdef KERNOUT - KERNEL_OUTPUT := KBUILD_OUTPUT=$(KERNOUT) -else - KERNEL_OUTPUT := -endif - -# -# Determine if and with what options the rt2x00 drivers should be build -# -rt2x00lib-objs := rt2x00dev.o rt2x00mac.o rt2x00config.o rt2x00firmware.o - -ifeq ($(CONFIG_RT2X00),y) - obj-m += rt2x00lib.o - -ifeq ($(CONFIG_RT2X00PCI),y) - obj-m += rt2x00pci.o -endif - -ifeq ($(CONFIG_RT2X00USB),y) - obj-m += rt2x00usb.o -endif - -ifeq ($(CONFIG_RT2X00_LIB_DEBUGFS),y) - rt2x00lib-objs += rt2x00debug.o -endif - -ifeq ($(CONFIG_RT2400PCI),y) - obj-m += rt2400pci.o -ifeq ($(CONFIG_RT2400PCI_RFKILL),y) - rt2x00lib-objs += rt2x00rfkill.o - EXTRA_CFLAGS += -DCONFIG_RT2X00_LIB_RFKILL -endif -endif - -ifeq ($(CONFIG_RT2500PCI),y) - obj-m += rt2500pci.o -ifeq ($(CONFIG_RT2500PCI_RFKILL),y) - rt2x00lib-objs += rt2x00rfkill.o - EXTRA_CFLAGS += -DCONFIG_RT2X00_LIB_RFKILL -endif -endif - -ifeq ($(CONFIG_RT2500USB),y) - obj-m += rt2500usb.o -endif - -ifeq ($(CONFIG_RT61PCI),y) - EXTRA_CFLAGS += -DCONFIG_RT2X00_LIB_FIRMWARE - rt2x00lib-objs += rt2x00firmware.o - obj-m += rt61pci.o -ifeq ($(CONFIG_RT61PCI_RFKILL),y) - rt2x00lib-objs += rt2x00rfkill.o - EXTRA_CFLAGS += -DCONFIG_RT2X00_LIB_RFKILL -endif -endif - -ifeq ($(CONFIG_RT73USB),y) - EXTRA_CFLAGS += -DCONFIG_RT2X00_LIB_FIRMWARE - rt2x00lib-objs += rt2x00firmware.o - obj-m += rt73usb.o -endif - -endif - -MAKEFLAGS += --no-print-directory -EXTRA_CFLAGS := -include $(SUBDIRS)/rt2x00_compat.h $(CFLAGS) - -all: default - -config_header: - @if [ ! -f "rt2x00_config.h" ] || [ "rt2x00_config.h" -ot "config" ]; \ - then \ - awk -F = > rt2x00_config.h < config '/^CONFIG.*$\/ \ - { \ - if($$2 == "y") { \ - print "#ifndef " $$1; \ - print "#define " $$1; \ - print "#endif"; \ - print "" \ - } else { \ - print "#undef " $$1; \ - print ""; \ - } \ - }'; \ - fi - -default: config_header - @$(MAKE) -C $(KERNEL_SOURCES) SUBDIRS=$(SUBDIRS) $(KERNEL_OUTPUT) \ - modules - -sparse: config_header - @$(MAKE) -C $(KERNEL_SOURCES) SUBDIRS=$(SUBDIRS) $(KERNEL_OUTPUT) \ - modules C=1 CF=-D__CHECK_ENDIAN__ - -install: config_header - @$(MAKE) -C $(KERNEL_SOURCES) SUBDIRS=$(SUBDIRS) $(KERNEL_OUTPUT) \ - INSTALL_MOD_DIR=rt2x00 $(KERNEL_OUTPUT) modules_install - /sbin/depmod -a - -clean: - @rm -f rt2x00_config.h - @rm -f Modules.symvers Module.symvers - @for folder in $(EXTMODDIRS); \ - do \ - rm -f $${folder}/*.o \ - rm -f $${folder}/*.ko \ - rm -f $${folder}/*.s \ - rm -f $${folder}/*.mod.c \ - rm -f $${folder}/.*.cmd \ - rm -f $${folder}/.*.flags \ - rm -f $${folder}/.*.o.d \ - rm -f $${folder}/.*.s.d \ - rm -f $${folder}/.#* \ - rm -f $${folder}/*~ \ - rm -fr $${folder}/.tmp_versions; \ - done diff --git a/package/rt2x00/src/README b/package/rt2x00/src/README deleted file mode 100644 index 7f3f448eaac..00000000000 --- a/package/rt2x00/src/README +++ /dev/null @@ -1,548 +0,0 @@ -=============================================================================== - Installation and configuration instructions for the rt2x00 Modules -=============================================================================== - -=============================================================================== - Table of contents: -======================== - - - 1: Minimal requirements - - 1.1: kernel - - 1.2: gcc - - 1.3: make - - 2: Hardware - - 2.1: Chipsets - - 2.2: RF button - - 3: Module building & Installation - - 3.1: Introduction - - 3.2: Configure - - 3.3: Build - - 3.4: Installation - - 4: Firmware - - 4.1: Firmware files - - 4.2: Firmware installation - - 4.3: Firmware requirements - - 5: Module loading - - 5.1: Module load order - - 5.2: Module load options - - 6: Interfaces - - 6.1: Wireless interfaces - - 6.2: Input interface - - 7: Interface configuration - - 7.1: Minimal configuration - - 7.2: Configuration tools - - 8: Distribution specific notes - - 8.1: Debian & derivatives - - 8.2: Fedora - - 8.3: Gentoo - - 8.4: Mandriva - - 9: Problems & Troubleshooting - - 9.1: Debug information - - 9.2: Debugfs - - 9.3: Bug reporting - - 10: Problems & Workarounds - - 10.1: udev interface naming - - 10.2: BUG - ifdown & ifup radio failure - - 11: TODO list - - 12: Contact us - - -=============================================================================== - 1: Minimal requirements: -======================================= - -=================== - 1.1: kernel -========= - - - The minimal required kernel version is 2.6.22-rc1 - - - It is important that the installed kernel sources match - the running kernel. Unless you are crosscompiling and you - know what you are doing. - - - Depending on what rt2x00 components will be built, - some kernel configuration options are mandatory. - It does however not matter if these options are compiled - into the kernel or compiled as module. - - Kernel config option Required for component - ------------------------------------------------------------------ - # CONFIG_NET_RADIO all - # CONFIG_MAC80211 all - # CONFIG_WLAN_80211 all - # CONFIG_PCI rt2400pci, rt2500pci, rt61pci - # CONFIG_USB rt2500usb, rt73usb - # CONFIG_HOTPLUG rt61pci, rt73usb - # CONFIG_FW_LOADER rt61pci, rt73usb - # CONFIG_CRC_ITU_T rt61pci, rt73usb - # CONFIG_DEBUG_FS rt2x00 (optional, only for debug) - # CONFIG_RFKILL rt2400pci, rt2500pci, rt61pci (optional, - only for button support) - -=================== - 1.2: GCC -========= - - - For building the rt2x00 components the same gcc version is required - as was used to build your target kernel. - -=================== - 1.3: make -========= - - - The program 'make' needs to be installed on the system. There are no - further special requirements for this program. - -=============================================================================== - 2: Hardware -======================================= - -=================== - 2.1: Chipsets -========= - - Support for each Ralink wireless chipset has been split into separate drivers. - - # rt2400pci - - chipset: rt2400 - - supports: rt2460 - - bus type: PCI/PCMCIA/miniPCI - # rt2500pci - - chipset: rt2500 - - supports: rt2560 - - bus type: PCI/PCMCIA/miniPCI - # rt2500usb - - chipset: rt2570 - - supports: rt2570 - - bus type: USB - # rt61pci - - chipset: rt61 (or rt2600) - - supports: rt2561, rt2561s, rt2661 - - bus type: PCI/PCMCIA/miniPCI - # rt73usb - - chipset: rt73 - - supports: rt2571(w), rt2573, rt2671 - - bus type: USB - -=================== - 2.2: RF button -========= - - On some occasions the Ralink chipset has been built into a laptop. - If that is the case, there usually is a hardware button that controls the - radio of the wireless interface. - If you have such a hardware device, make sure you enable hardware button - support for your device in the configuration before building the rt2x00 - components. - Note: This feature requires the enabling of the rfkill driver in the kernel. - -=============================================================================== - 3: Module building & Installation -======================================= - -=================== - 3.1: Introduction -========= - - The following steps in this chapter concerning module building and - installation need to be performed for each kernel. This means that - after each kernel upgrade the modules need to be rebuild and - reinstalled in order to make them work with the new kernel. - -=================== - 3.2: Configure -========= - - Before starting to build the rt2x00 components it is recommended to look into - the 'config' file first. In this file you can configure which components of - rt2x00 should be built. And even more importantly, you can configure with - what options the components will be built. - To build all the rt2x00 drivers (with debug capabilities enabled) no changes - in the configuration file are required. For most users this would be - sufficient to start working with rt2x00. - -=================== - 3.3: Build -========= - - To build all rt2x00 components which were enabled in the configuration file - simply run (root privileges not required): - - # $ make - - All modules (.ko files) will be created in the current directory. - -=================== - 3.4: Installation -========= - - All rt2x00 modules can be installed by doing (with root privileges): - - # $ make install - - With this command all rt2x00 modules (including rfkill and d80211) will be - created in a newly created folder named 'rt2x00' inside the kernel modules - directory (usually '/lib/modules/$(uname -r)/'). - - -============================================================================== - 4: Firmware -======================================= - -=================== - 4.1: Firmware files -========= - - rt61pci and rt73usb require firmware to be available while loading the module. - The following firmware files are available for each driver: - - # rt61pci - - rt2561.bin - - rt2561s.bin - - rt2661.bin - - # rt73usb - - rt73.bin - -=================== - 4.2: Firmware installation -========= - - The latest firmware files are available in a separate .zip archive and can be - downloaded from the support page on the Ralink website at - http://www.ralinktech.com. - Note that by a high level of logic, Ralink has named their firmware for rt73 - chipsets "rt71W" with a comment that it is for the rt2571W and rt2671 devices. - For rt61pci 3 seperate firmware files are available, which one is used depends - on which RT chip is on the device. Usually it is best to install all files. - To install the firmware the firmware files need to be manually copied to the - systems firmware folder (usually '/lib/firmware/') the exact folder depends - on the distribution. When in doubt consult the distributions documentation. - -=================== - 4.3: Firmware requirements -========= - - To load firmware when the module is loaded the hotplug daemon should be - running. Make sure you either enable hotplugging manually before loading the - module, or make sure hotplugging is enabled during the system boot process. - - -============================================================================== - 5: Module loading -======================================= - -=================== - 5.1: Module load order -========= - - When the modules have been properly installed by following the installation - instructions from the previous section, the module handlers (i.e. modprobe) - will automaticly resolve all module dependencies when loading the device - specific driver. - - When loading the modules manually with insmod, you should load them in the - following order: - - # eeprom_93cx6.ko (optional, only required for pci devices) - # rt2x00lib.ko - # rt2x00pci.ko (optional, only required for pci devices) - # rt2x00usb.ko (optional, only required for usb devices) - # rt2400pci.ko (optional, only required for rt2400 support) - # rt2500pci.ko (optional, only required for rt2500 support) - # rt2500usb.ko (optional, only required for rt2570 support) - # rt61pci.ko (optional, only required for rt61 support) - # rt73usb.ko (optional, only required for rt73 support) - -=================== - 5.2: Module load options -========= - - None. - - -============================================================================== - 6: Interfaces -======================================= - -=================== - 6.1: Wireless interfaces -========= - - After loading the modules two interfaces will now be visible in ifconfig and - iwconfig, namely wmaster0 and wlan0. The first device is the so called master - device which is can be used by some userspace tools, but normally can be - ignored by the user. The second interface wlan0 is the client interface which - the user can configure. - With rt2x00 it is possible to run multiple client interfaces with - only a single device. 1 client interface can run in adhoc, managed or master - mode while a second interface can run in monitor mode at the same time. - More client interfaces can be added by issuing the following command - (with root privileges): - - # $ echo -n > /sys/class/ieee80211//add_iface - - where the variable is the name of the client interface that should be - added (i.e. wlan1), and is the physical device where the new client - interface should be attached to (i.e. phy0). - -=================== - 6.2: Input interface -========= - - When the rfkill driver is being used a new input device with the name of the - device specific module where the button belongs to will have been created. - Whenever the user presses the hardware button the rfkill driver will - automatically make sure the hardware radio is being disabled or enabled - accordingly. When the user has opened the input device the radio will - not be automatically controlled, but instead the input device will - report all button events (KEY_RFKILL) to userspace where the user - could have setup script to do all the work that has to be executed. - This means that while the input device is opened, the user is responsible - for the correct behaviour. - - -============================================================================== - 7: Interface configuration -======================================= - -=================== - 7.1: Minimal configuration -========= - - - After loading the modules the interface should be configured to start - an association or work in monitor mode. The following steps are required - for a minimal configuration to associate with a non-encrypted access point. - - - Before bringing the client interface up, the working mode should be set: - - # $ iwconfig wlan0 mode managed - - - Configuration parts like essid and channel can be set before or after the - client interface has been brought up. - - - It is usually a good idea to set the essid: - - # $ iwconfig wlan0 essid myessid - - - In some situations the device also requires the channel to be manually set: - - # $ iwconfig wlan0 channel mychannel - - - To bring the client interface up: - - # $ ifconfig wlan0 up - - - After the client interface has been brought up, scanning can be performed - to check if the desired AP is being detected. - - # $ iwlist wlan0 scan - - - To start an association attempt, the AP address should be set: - - # $ iwconfig wlan0 ap mybssid - -=================== - 7.2: Configuration tools -========= - - To configure the interface several tools are possible, the most basic tools - are the wireless-tools that provide the iwconfig, iwpriv and iwlist commands. - For WPA connections the wireless-tools are not sufficient, to configure the - interface for WPA wireless network wpa_supplicant is required. - For master mode functionality it is possible to only use the wireless-tools, - but it is recommended to use hostapd instead. This tool offers the best - functionality. - For all configuration tools (wireless-tools, wpa_supplicant and hostapd) are - manuals and howto's present in the manpages or on the internet. It is adviced - to have at least read the manpages before using the tools for a better - understanding on configuring the interface. - - -============================================================================== - 8: Distribution specific notes -======================================= - -=================== - 8.1: Debian & derivatives -========= - - In some instances installing the rt2x00 drivers on debian will result - in the problem that the files are being copied into the wrong folder, - which results in the fact that the driver cannot be loaded. - Installing the drivers should be done manually in this case, - please refer to the distributions documentation regarding the proper - location of the kernel modules. - -=================== - 8.2: Fedora -========= - - Although rt2x00 contains many backward compatibility fixes to ensure - that all rt2x00 components will be able to compile and run on all - systems that meet the minimal requirements, this does not work in all - situations when the Fedora kernels are being used. - The problem lies in the fact that Fedora (like most other distributions) - heavily patch their kernel for better stability and more features. - Unlike the other distributions however, Fedora does not pay attention to - compatibility for external kernel drivers. This means that compiling rt2x00 - while using a Fedora kernel will result in compile errors regarding unknown - fields in structures or problems with function arguments. - For rt2x00 it is impossible to make all checks to support all Fedora kernel - releases. This means that when rt2x00 compilation is failing while using a - Fedora kernel we cannot give support for the compilation steps. - We recommend the user to complain to the Fedora developers when this problem - occurs. - If the user has managed to compile rt2x00 for a Fedora kernel we will - give support for possible problems while working with rt2x00. So the only - part we do not support is the building of rt2x00. - Please note that when you have edited the rt2x00 code to make it compile, - it is advised to state those changes in bugreports while reporting other - problems with rt2x00. - -=================== - 8.3: Gentoo -========= - - rt2x00 can also be found in portage, both the beta releases and the cvs tree. - Because rt2x00 is still experimental these ebuild are still masked, this means - that before you can emerge them they first have to be unmasked. - Gentoo provides various instructions on how this can be done on their website. - -=================== - 8.4: Mandriva -========= - - In some instances installing the rt2x00 drivers on Mandriva will result - in the problem that the files are being copied into the wrong folder, - which results in the fact that the driver cannot be loaded. - Installing the drivers should be done manually in this case, - please refer to the distributions documentation regarding the proper - location of the kernel modules. - - -============================================================================== - 9: Problems & Troubleshooting -======================================= - -=================== - 9.1: Debug information -========= - - When reporting problems make sure the driver has been compiled with debug - enabled. - If you have done so, the debug output can be found in the output - of 'dmesg' and also in /var/log/messages and /var/log/syslog. - -=================== - 9.2: Debugfs -========= - - rt2x00 provides several debugfs entries which can be used to help - provide more information about the interface. - To see the rt2x00 debugfs entries, debugfs should first be mounted, - to do this you should issue the following command: - - # $ mount -t debugfs none /debug - - Where /debug is the directy on which the debugfs entries should appear, - make sure this directory exists when mounting debugfs. - With the debugfs folder, the rt2x00 folder with the rt2x00 debugfs entries - will be created. Within the rt2x00 folder, each physical device will be - represented by a folder named after the interface which belongs to this - device. Within the folder the following files can be found: - - # register - - This file contains the register contents of the interface. - # eeprom - - This file contains the eeprom contents of the interface. - -=================== - 9.3: Bug reporting -========= - - When reporting a bug or problem with the rt2x00 module, - make sure you report the following information: - # How to reproduce - # RT2x00 debug output, usually found in /var/log/messages - # Module version - # Wireless card chipset, model and manufacturer - # Kernel version (i.e. 2.6.17) - # Hardware architecture (i.e. x86, AMD64, Sparc) - # rt2x00 code changes done by the user - # Anything else you may think will help us resolve the issue - - -============================================================================== - 10: Problems & Workarounds -======================================= - -=================== - 10.1: udev interface naming -========= - - In some cases when loading the rt2x00 drivers the interface names are - different from the names used in this README. This is usually caused by the - udev handler who has set some rules regarding the interface. These rules - are usually set up by the distribution and have been created especially for - for the legacy driver and their strange behavior. - To change the rules udev applies to your interface you should edit the udev - rules stored in /etc/udev/rules.d/ (exact location might be different - depending on distribution). - When editing this file, search for the line that contains something like this: - - # ACTION=="add", SUBSYSTEM=="net", DRIVERS=="?*", - # SYSFS{address}=="", NAME="" - (line has been wrapped due to max line length limit) - - Where is the hardware address of your wireless networkcard, - and is the interface name the interface takes as soon as the - rt2x00 modules are loaded. - This line should be changed to look like: - - # ACTION=="add", SUBSYSTEM=="net", DRIVERS=="?*", - # SYSFS{address}=="", SYSFS{type}=="801", - # NAME="wmaster0" - # ACTION=="add", SUBSYSTEM=="net", DRIVERS=="?*", - # SYSFS{address}=="", NAME="wlan0" - (the 2 lines have been wrapped due to max line length limit) - - Where is the hardware address of your wireless networkcard, - and thus should be the same as on the original line. - -=================== - 10.2: BUG - ifdown & ifup radio failure -========= - - It is a known issue (and BUG) that the driver will fail to correctly resume - its radio operations after the interface has been brought down and up again. - It is still unknown what the cause for this issue could be, besides the fact - that for some reason the device's registers have been incorrectly initialized. - This issue also has impact on the device status after a suspend/resume - operation. There is no known workaround for this yet. - - -============================================================================== - 11: TODO list -======================================= - See http://rt2x00.serialmonkey.com/wiki/index.php/Rt2x00_beta - -============================================================================== - 12: Contact us -======================================= - - - Website - # http://rt2x00.serialmonkey.com/ - # http://rt2x00.serialmonkey.com/wiki/index.php/Rt2x00_beta - - - Forums: - # http://rt2x00.serialmonkey.com/phpBB2/ - - - Mailing list: - # general: rt2400-general@lists.sourceforge.net - # developers: rt2400-devel@lists.sourceforge.net - - - Sourceforge: - # http://sourceforge.net/projects/rt2400 - diff --git a/package/rt2x00/src/THANKS b/package/rt2x00/src/THANKS deleted file mode 100644 index 81b88d21f9c..00000000000 --- a/package/rt2x00/src/THANKS +++ /dev/null @@ -1,54 +0,0 @@ -A big thanks to all the developers, testers and supporters of -the rt2x00 Linux source code. - -Thanks to the projects main developers: -* Mark Wallis - mwallis@serialmonkey.com -* Ivo van Doorn - IvDoorn@gmail.com -* Luis Correia - lfcorreia@users.sf.net -* Robin Cornelius - robin.cornelius@gmail.com -* Gertjan van Wingerde - gwingerde@kpnplanet.nl -* Romain - spy84464@hotmail.com - -Special thanks to the contributors of this project: -* Adisorn Ermongkonchai - moo7822-wlan@yahoo.com -* Amir Shalem - amir@boom.org.il -* Bernd Petrovitsch - bernd@firmix.at -* Bruno - bruno123@users.sf.net -* Chris Houston - chris.houston@atterotech.com -* Defekt - defekt@liquid-nexus.net -* Edvard - eaglenest@users.sourceforge.net -* Flavio Stanchina - flavio@stanchina.net -* Gregor Glomm - gg@seh.de -* Heikki Pernu - heikki.pernu@nekonet.fi -* Jerzy Kozera - nordom@tlen.pl -* Joachim Gleißner - jg@suse.de -* John Coppens - john@jcoppens.com -* Jonathan Hudson -* KrissN - krissn@op.pl -* Luca Tettamanti - kronos.it@gmail.com -* Magnus Damm - magnus.damm@gmail.com -* Mags -* Mathias Klien - ma_klein@gmx.de -* Meelis Roos - mroos@linux.ee -* Michal Ludvig - michal@logix.cz -* Miguel - miguel.marte2@verizon.net -* Mike Skinner -* Olivier Cornu - o.cornu@gmail.com -* Paul Hampson - Paul.Hampson@anu.edu.au -* Philippe Rousselot - amazilia@users.sourceforge.net -* Remco - remco@d-compu.dyndns.org -* Sergey Vlasov - vsu@altlinux.ru -* Stephen Warren - SWarren@nvidia.com -* Stuart Rackham - srackham@methods.co.nz -* Thor Harald Johansen - thorhajo@gmail.com -* Tor Petterson - 2r@manowar.dk - -Special thanks: -* Ralink - http://www.ralinktech.com.tw - For releasing their rt2400/rt2500/rt2570 drivers under the GPL, - and their assistance in providing documentation to help development. -* Minitar - www.minitar.com - For working together with Ralink on releasing the - rt2400/rt2500/rt2570 drivers under the GPL. -* All the people that have assisted with the rt2400/rt2500/rt2570 source - and hence progressed the rt2x00 along the way. diff --git a/package/rt2x00/src/rt2400pci.c b/package/rt2x00/src/rt2400pci.c deleted file mode 100644 index 31c1dd27162..00000000000 --- a/package/rt2x00/src/rt2400pci.c +++ /dev/null @@ -1,1664 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2400pci - Abstract: rt2400pci device specific routines. - Supported chipsets: RT2460. - */ - -/* - * Set enviroment defines for rt2x00.h - */ -#define DRV_NAME "rt2400pci" - -#include -#include -#include -#include -#include -#include -#include - -#include "rt2x00.h" -#include "rt2x00pci.h" -#include "rt2400pci.h" - -/* - * Register access. - * All access to the CSR registers will go through the methods - * rt2x00pci_register_read and rt2x00pci_register_write. - * BBP and RF register require indirect register access, - * and use the CSR registers BBPCSR and RFCSR to achieve this. - * These indirect registers work with busy bits, - * and we will try maximal REGISTER_BUSY_COUNT times to access - * the register while taking a REGISTER_BUSY_DELAY us delay - * between each attampt. When the busy bit is still set at that time, - * the access attempt is considered to have failed, - * and we will print an error. - */ -static u32 rt2400pci_bbp_check(const struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - unsigned int i; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, BBPCSR, ®); - if (!rt2x00_get_field32(reg, BBPCSR_BUSY)) - break; - udelay(REGISTER_BUSY_DELAY); - } - - return reg; -} - -static void rt2400pci_bbp_write(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u8 value) -{ - u32 reg; - - /* - * Wait until the BBP becomes ready. - */ - reg = rt2400pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { - ERROR(rt2x00dev, "BBPCSR register busy. Write failed.\n"); - return; - } - - /* - * Write the data into the BBP. - */ - reg = 0; - rt2x00_set_field32(®, BBPCSR_VALUE, value); - rt2x00_set_field32(®, BBPCSR_REGNUM, word); - rt2x00_set_field32(®, BBPCSR_BUSY, 1); - rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 1); - - rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); -} - -static void rt2400pci_bbp_read(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, u8 *value) -{ - u32 reg; - - /* - * Wait until the BBP becomes ready. - */ - reg = rt2400pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { - ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n"); - return; - } - - /* - * Write the request into the BBP. - */ - reg = 0; - rt2x00_set_field32(®, BBPCSR_REGNUM, word); - rt2x00_set_field32(®, BBPCSR_BUSY, 1); - rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 0); - - rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); - - /* - * Wait until the BBP becomes ready. - */ - reg = rt2400pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { - ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n"); - *value = 0xff; - return; - } - - *value = rt2x00_get_field32(reg, BBPCSR_VALUE); -} - -static void rt2400pci_rf_write(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u32 value) -{ - u32 reg; - unsigned int i; - - if (!word) - return; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, RFCSR, ®); - if (!rt2x00_get_field32(reg, RFCSR_BUSY)) - goto rf_write; - udelay(REGISTER_BUSY_DELAY); - } - - ERROR(rt2x00dev, "RFCSR register busy. Write failed.\n"); - return; - -rf_write: - reg = 0; - rt2x00_set_field32(®, RFCSR_VALUE, value); - rt2x00_set_field32(®, RFCSR_NUMBER_OF_BITS, 20); - rt2x00_set_field32(®, RFCSR_IF_SELECT, 0); - rt2x00_set_field32(®, RFCSR_BUSY, 1); - - rt2x00pci_register_write(rt2x00dev, RFCSR, reg); - rt2x00_rf_write(rt2x00dev, word, value); -} - -static void rt2400pci_eepromregister_read(struct eeprom_93cx6 *eeprom) -{ - struct rt2x00_dev *rt2x00dev = eeprom->data; - u32 reg; - - rt2x00pci_register_read(rt2x00dev, CSR21, ®); - - eeprom->reg_data_in = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_IN); - eeprom->reg_data_out = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_OUT); - eeprom->reg_data_clock = - !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_CLOCK); - eeprom->reg_chip_select = - !!rt2x00_get_field32(reg, CSR21_EEPROM_CHIP_SELECT); -} - -static void rt2400pci_eepromregister_write(struct eeprom_93cx6 *eeprom) -{ - struct rt2x00_dev *rt2x00dev = eeprom->data; - u32 reg = 0; - - rt2x00_set_field32(®, CSR21_EEPROM_DATA_IN, !!eeprom->reg_data_in); - rt2x00_set_field32(®, CSR21_EEPROM_DATA_OUT, !!eeprom->reg_data_out); - rt2x00_set_field32(®, CSR21_EEPROM_DATA_CLOCK, - !!eeprom->reg_data_clock); - rt2x00_set_field32(®, CSR21_EEPROM_CHIP_SELECT, - !!eeprom->reg_chip_select); - - rt2x00pci_register_write(rt2x00dev, CSR21, reg); -} - -#ifdef CONFIG_RT2X00_LIB_DEBUGFS -#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) ) - -static void rt2400pci_read_csr(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 *data) -{ - rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data); -} - -static void rt2400pci_write_csr(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 data) -{ - rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data); -} - -static const struct rt2x00debug rt2400pci_rt2x00debug = { - .owner = THIS_MODULE, - .csr = { - .read = rt2400pci_read_csr, - .write = rt2400pci_write_csr, - .word_size = sizeof(u32), - .word_count = CSR_REG_SIZE / sizeof(u32), - }, - .eeprom = { - .read = rt2x00_eeprom_read, - .write = rt2x00_eeprom_write, - .word_size = sizeof(u16), - .word_count = EEPROM_SIZE / sizeof(u16), - }, - .bbp = { - .read = rt2400pci_bbp_read, - .write = rt2400pci_bbp_write, - .word_size = sizeof(u8), - .word_count = BBP_SIZE / sizeof(u8), - }, - .rf = { - .read = rt2x00_rf_read, - .write = rt2400pci_rf_write, - .word_size = sizeof(u32), - .word_count = RF_SIZE / sizeof(u32), - }, -}; -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ - -#ifdef CONFIG_RT2400PCI_RFKILL -static int rt2400pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®); - return rt2x00_get_field32(reg, GPIOCSR_BIT0); -} -#else -#define rt2400pci_rfkill_poll NULL -#endif /* CONFIG_RT2400PCI_RFKILL */ - -/* - * Configuration handlers. - */ -static void rt2400pci_config_mac_addr(struct rt2x00_dev *rt2x00dev, - __le32 *mac) -{ - rt2x00pci_register_multiwrite(rt2x00dev, CSR3, mac, - (2 * sizeof(__le32))); -} - -static void rt2400pci_config_bssid(struct rt2x00_dev *rt2x00dev, - __le32 *bssid) -{ - rt2x00pci_register_multiwrite(rt2x00dev, CSR5, bssid, - (2 * sizeof(__le32))); -} - -static void rt2400pci_config_type(struct rt2x00_dev *rt2x00dev, const int type, - const int tsf_sync) -{ - u32 reg; - - rt2x00pci_register_write(rt2x00dev, CSR14, 0); - - /* - * Enable beacon config - */ - rt2x00pci_register_read(rt2x00dev, BCNCSR1, ®); - rt2x00_set_field32(®, BCNCSR1_PRELOAD, - PREAMBLE + get_duration(IEEE80211_HEADER, 20)); - rt2x00pci_register_write(rt2x00dev, BCNCSR1, reg); - - /* - * Enable synchronisation. - */ - rt2x00pci_register_read(rt2x00dev, CSR14, ®); - rt2x00_set_field32(®, CSR14_TSF_COUNT, 1); - rt2x00_set_field32(®, CSR14_TBCN, 1); - rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); - rt2x00_set_field32(®, CSR14_TSF_SYNC, tsf_sync); - rt2x00pci_register_write(rt2x00dev, CSR14, reg); -} - -static void rt2400pci_config_preamble(struct rt2x00_dev *rt2x00dev, - const int short_preamble, - const int ack_timeout, - const int ack_consume_time) -{ - int preamble_mask; - u32 reg; - - /* - * When short preamble is enabled, we should set bit 0x08 - */ - preamble_mask = short_preamble << 3; - - rt2x00pci_register_read(rt2x00dev, TXCSR1, ®); - rt2x00_set_field32(®, TXCSR1_ACK_TIMEOUT, ack_timeout); - rt2x00_set_field32(®, TXCSR1_ACK_CONSUME_TIME, ack_consume_time); - rt2x00pci_register_write(rt2x00dev, TXCSR1, reg); - - rt2x00pci_register_read(rt2x00dev, ARCSR2, ®); - rt2x00_set_field32(®, ARCSR2_SIGNAL, 0x00 | preamble_mask); - rt2x00_set_field32(®, ARCSR2_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 10)); - rt2x00pci_register_write(rt2x00dev, ARCSR2, reg); - - rt2x00pci_register_read(rt2x00dev, ARCSR3, ®); - rt2x00_set_field32(®, ARCSR3_SIGNAL, 0x01 | preamble_mask); - rt2x00_set_field32(®, ARCSR3_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 20)); - rt2x00pci_register_write(rt2x00dev, ARCSR3, reg); - - rt2x00pci_register_read(rt2x00dev, ARCSR4, ®); - rt2x00_set_field32(®, ARCSR4_SIGNAL, 0x02 | preamble_mask); - rt2x00_set_field32(®, ARCSR4_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 55)); - rt2x00pci_register_write(rt2x00dev, ARCSR4, reg); - - rt2x00pci_register_read(rt2x00dev, ARCSR5, ®); - rt2x00_set_field32(®, ARCSR5_SIGNAL, 0x03 | preamble_mask); - rt2x00_set_field32(®, ARCSR5_SERVICE, 0x84); - rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 110)); - rt2x00pci_register_write(rt2x00dev, ARCSR5, reg); -} - -static void rt2400pci_config_phymode(struct rt2x00_dev *rt2x00dev, - const int basic_rate_mask) -{ - rt2x00pci_register_write(rt2x00dev, ARCSR1, basic_rate_mask); -} - -static void rt2400pci_config_channel(struct rt2x00_dev *rt2x00dev, - struct rf_channel *rf) -{ - /* - * Switch on tuning bits. - */ - rt2x00_set_field32(&rf->rf1, RF1_TUNER, 1); - rt2x00_set_field32(&rf->rf3, RF3_TUNER, 1); - - rt2400pci_rf_write(rt2x00dev, 1, rf->rf1); - rt2400pci_rf_write(rt2x00dev, 2, rf->rf2); - rt2400pci_rf_write(rt2x00dev, 3, rf->rf3); - - /* - * RF2420 chipset don't need any additional actions. - */ - if (rt2x00_rf(&rt2x00dev->chip, RF2420)) - return; - - /* - * For the RT2421 chipsets we need to write an invalid - * reference clock rate to activate auto_tune. - * After that we set the value back to the correct channel. - */ - rt2400pci_rf_write(rt2x00dev, 1, rf->rf1); - rt2400pci_rf_write(rt2x00dev, 2, 0x000c2a32); - rt2400pci_rf_write(rt2x00dev, 3, rf->rf3); - - msleep(1); - - rt2400pci_rf_write(rt2x00dev, 1, rf->rf1); - rt2400pci_rf_write(rt2x00dev, 2, rf->rf2); - rt2400pci_rf_write(rt2x00dev, 3, rf->rf3); - - msleep(1); - - /* - * Switch off tuning bits. - */ - rt2x00_set_field32(&rf->rf1, RF1_TUNER, 0); - rt2x00_set_field32(&rf->rf3, RF3_TUNER, 0); - - rt2400pci_rf_write(rt2x00dev, 1, rf->rf1); - rt2400pci_rf_write(rt2x00dev, 3, rf->rf3); - - /* - * Clear false CRC during channel switch. - */ - rt2x00pci_register_read(rt2x00dev, CNT0, &rf->rf1); -} - -static void rt2400pci_config_txpower(struct rt2x00_dev *rt2x00dev, int txpower) -{ - rt2400pci_bbp_write(rt2x00dev, 3, TXPOWER_TO_DEV(txpower)); -} - -static void rt2400pci_config_antenna(struct rt2x00_dev *rt2x00dev, - int antenna_tx, int antenna_rx) -{ - u8 r1; - u8 r4; - - rt2400pci_bbp_read(rt2x00dev, 4, &r4); - rt2400pci_bbp_read(rt2x00dev, 1, &r1); - - /* - * Configure the TX antenna. - */ - switch (antenna_tx) { - case ANTENNA_SW_DIVERSITY: - case ANTENNA_HW_DIVERSITY: - rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 1); - break; - case ANTENNA_A: - rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 0); - break; - case ANTENNA_B: - rt2x00_set_field8(&r1, BBP_R1_TX_ANTENNA, 2); - break; - } - - /* - * Configure the RX antenna. - */ - switch (antenna_rx) { - case ANTENNA_SW_DIVERSITY: - case ANTENNA_HW_DIVERSITY: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); - break; - case ANTENNA_A: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 0); - break; - case ANTENNA_B: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); - break; - } - - rt2400pci_bbp_write(rt2x00dev, 4, r4); - rt2400pci_bbp_write(rt2x00dev, 1, r1); -} - -static void rt2400pci_config_duration(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, CSR11, ®); - rt2x00_set_field32(®, CSR11_SLOT_TIME, libconf->slot_time); - rt2x00pci_register_write(rt2x00dev, CSR11, reg); - - rt2x00pci_register_read(rt2x00dev, CSR18, ®); - rt2x00_set_field32(®, CSR18_SIFS, libconf->sifs); - rt2x00_set_field32(®, CSR18_PIFS, libconf->pifs); - rt2x00pci_register_write(rt2x00dev, CSR18, reg); - - rt2x00pci_register_read(rt2x00dev, CSR19, ®); - rt2x00_set_field32(®, CSR19_DIFS, libconf->difs); - rt2x00_set_field32(®, CSR19_EIFS, libconf->eifs); - rt2x00pci_register_write(rt2x00dev, CSR19, reg); - - rt2x00pci_register_read(rt2x00dev, TXCSR1, ®); - rt2x00_set_field32(®, TXCSR1_TSF_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(®, TXCSR1_AUTORESPONDER, 1); - rt2x00pci_register_write(rt2x00dev, TXCSR1, reg); - - rt2x00pci_register_read(rt2x00dev, CSR12, ®); - rt2x00_set_field32(®, CSR12_BEACON_INTERVAL, - libconf->conf->beacon_int * 16); - rt2x00_set_field32(®, CSR12_CFP_MAX_DURATION, - libconf->conf->beacon_int * 16); - rt2x00pci_register_write(rt2x00dev, CSR12, reg); -} - -static void rt2400pci_config(struct rt2x00_dev *rt2x00dev, - const unsigned int flags, - struct rt2x00lib_conf *libconf) -{ - if (flags & CONFIG_UPDATE_PHYMODE) - rt2400pci_config_phymode(rt2x00dev, libconf->basic_rates); - if (flags & CONFIG_UPDATE_CHANNEL) - rt2400pci_config_channel(rt2x00dev, &libconf->rf); - if (flags & CONFIG_UPDATE_TXPOWER) - rt2400pci_config_txpower(rt2x00dev, - libconf->conf->power_level); - if (flags & CONFIG_UPDATE_ANTENNA) - rt2400pci_config_antenna(rt2x00dev, - libconf->conf->antenna_sel_tx, - libconf->conf->antenna_sel_rx); - if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT)) - rt2400pci_config_duration(rt2x00dev, libconf); -} - -static void rt2400pci_config_cw(struct rt2x00_dev *rt2x00dev, - struct ieee80211_tx_queue_params *params) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, CSR11, ®); - rt2x00_set_field32(®, CSR11_CWMIN, params->cw_min); - rt2x00_set_field32(®, CSR11_CWMAX, params->cw_max); - rt2x00pci_register_write(rt2x00dev, CSR11, reg); -} - -/* - * LED functions. - */ -static void rt2400pci_enable_led(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, LEDCSR, ®); - - rt2x00_set_field32(®, LEDCSR_ON_PERIOD, 70); - rt2x00_set_field32(®, LEDCSR_OFF_PERIOD, 30); - - if (rt2x00dev->led_mode == LED_MODE_TXRX_ACTIVITY) { - rt2x00_set_field32(®, LEDCSR_LINK, 1); - rt2x00_set_field32(®, LEDCSR_ACTIVITY, 0); - } else if (rt2x00dev->led_mode == LED_MODE_ASUS) { - rt2x00_set_field32(®, LEDCSR_LINK, 0); - rt2x00_set_field32(®, LEDCSR_ACTIVITY, 1); - } else { - rt2x00_set_field32(®, LEDCSR_LINK, 1); - rt2x00_set_field32(®, LEDCSR_ACTIVITY, 1); - } - - rt2x00pci_register_write(rt2x00dev, LEDCSR, reg); -} - -static void rt2400pci_disable_led(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, LEDCSR, ®); - rt2x00_set_field32(®, LEDCSR_LINK, 0); - rt2x00_set_field32(®, LEDCSR_ACTIVITY, 0); - rt2x00pci_register_write(rt2x00dev, LEDCSR, reg); -} - -/* - * Link tuning - */ -static void rt2400pci_link_stats(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - u8 bbp; - - /* - * Update FCS error count from register. - */ - rt2x00pci_register_read(rt2x00dev, CNT0, ®); - rt2x00dev->link.rx_failed = rt2x00_get_field32(reg, CNT0_FCS_ERROR); - - /* - * Update False CCA count from register. - */ - rt2400pci_bbp_read(rt2x00dev, 39, &bbp); - rt2x00dev->link.false_cca = bbp; -} - -static void rt2400pci_reset_tuner(struct rt2x00_dev *rt2x00dev) -{ - rt2400pci_bbp_write(rt2x00dev, 13, 0x08); - rt2x00dev->link.vgc_level = 0x08; -} - -static void rt2400pci_link_tuner(struct rt2x00_dev *rt2x00dev) -{ - u8 reg; - - /* - * The link tuner should not run longer then 60 seconds, - * and should run once every 2 seconds. - */ - if (rt2x00dev->link.count > 60 || !(rt2x00dev->link.count & 1)) - return; - - /* - * Base r13 link tuning on the false cca count. - */ - rt2400pci_bbp_read(rt2x00dev, 13, ®); - - if (rt2x00dev->link.false_cca > 512 && reg < 0x20) { - rt2400pci_bbp_write(rt2x00dev, 13, ++reg); - rt2x00dev->link.vgc_level = reg; - } else if (rt2x00dev->link.false_cca < 100 && reg > 0x08) { - rt2400pci_bbp_write(rt2x00dev, 13, --reg); - rt2x00dev->link.vgc_level = reg; - } -} - -/* - * Initialization functions. - */ -static void rt2400pci_init_rxring(struct rt2x00_dev *rt2x00dev) -{ - struct data_ring *ring = rt2x00dev->rx; - struct data_desc *rxd; - unsigned int i; - u32 word; - - memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring)); - - for (i = 0; i < ring->stats.limit; i++) { - rxd = ring->entry[i].priv; - - rt2x00_desc_read(rxd, 2, &word); - rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH, - ring->data_size); - rt2x00_desc_write(rxd, 2, word); - - rt2x00_desc_read(rxd, 1, &word); - rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, - ring->entry[i].data_dma); - rt2x00_desc_write(rxd, 1, word); - - rt2x00_desc_read(rxd, 0, &word); - rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); - rt2x00_desc_write(rxd, 0, word); - } - - rt2x00_ring_index_clear(rt2x00dev->rx); -} - -static void rt2400pci_init_txring(struct rt2x00_dev *rt2x00dev, const int queue) -{ - struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue); - struct data_desc *txd; - unsigned int i; - u32 word; - - memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring)); - - for (i = 0; i < ring->stats.limit; i++) { - txd = ring->entry[i].priv; - - rt2x00_desc_read(txd, 1, &word); - rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, - ring->entry[i].data_dma); - rt2x00_desc_write(txd, 1, word); - - rt2x00_desc_read(txd, 2, &word); - rt2x00_set_field32(&word, TXD_W2_BUFFER_LENGTH, - ring->data_size); - rt2x00_desc_write(txd, 2, word); - - rt2x00_desc_read(txd, 0, &word); - rt2x00_set_field32(&word, TXD_W0_VALID, 0); - rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); - rt2x00_desc_write(txd, 0, word); - } - - rt2x00_ring_index_clear(ring); -} - -static int rt2400pci_init_rings(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - /* - * Initialize rings. - */ - rt2400pci_init_rxring(rt2x00dev); - rt2400pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA0); - rt2400pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA1); - rt2400pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON); - rt2400pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); - - /* - * Initialize registers. - */ - rt2x00pci_register_read(rt2x00dev, TXCSR2, ®); - rt2x00_set_field32(®, TXCSR2_TXD_SIZE, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].desc_size); - rt2x00_set_field32(®, TXCSR2_NUM_TXD, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].stats.limit); - rt2x00_set_field32(®, TXCSR2_NUM_ATIM, - rt2x00dev->bcn[1].stats.limit); - rt2x00_set_field32(®, TXCSR2_NUM_PRIO, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].stats.limit); - rt2x00pci_register_write(rt2x00dev, TXCSR2, reg); - - rt2x00pci_register_read(rt2x00dev, TXCSR3, ®); - rt2x00_set_field32(®, TXCSR3_TX_RING_REGISTER, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].data_dma); - rt2x00pci_register_write(rt2x00dev, TXCSR3, reg); - - rt2x00pci_register_read(rt2x00dev, TXCSR5, ®); - rt2x00_set_field32(®, TXCSR5_PRIO_RING_REGISTER, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].data_dma); - rt2x00pci_register_write(rt2x00dev, TXCSR5, reg); - - rt2x00pci_register_read(rt2x00dev, TXCSR4, ®); - rt2x00_set_field32(®, TXCSR4_ATIM_RING_REGISTER, - rt2x00dev->bcn[1].data_dma); - rt2x00pci_register_write(rt2x00dev, TXCSR4, reg); - - rt2x00pci_register_read(rt2x00dev, TXCSR6, ®); - rt2x00_set_field32(®, TXCSR6_BEACON_RING_REGISTER, - rt2x00dev->bcn[0].data_dma); - rt2x00pci_register_write(rt2x00dev, TXCSR6, reg); - - rt2x00pci_register_read(rt2x00dev, RXCSR1, ®); - rt2x00_set_field32(®, RXCSR1_RXD_SIZE, rt2x00dev->rx->desc_size); - rt2x00_set_field32(®, RXCSR1_NUM_RXD, rt2x00dev->rx->stats.limit); - rt2x00pci_register_write(rt2x00dev, RXCSR1, reg); - - rt2x00pci_register_read(rt2x00dev, RXCSR2, ®); - rt2x00_set_field32(®, RXCSR2_RX_RING_REGISTER, - rt2x00dev->rx->data_dma); - rt2x00pci_register_write(rt2x00dev, RXCSR2, reg); - - return 0; -} - -static int rt2400pci_init_registers(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00pci_register_write(rt2x00dev, PSCSR0, 0x00020002); - rt2x00pci_register_write(rt2x00dev, PSCSR1, 0x00000002); - rt2x00pci_register_write(rt2x00dev, PSCSR2, 0x00023f20); - rt2x00pci_register_write(rt2x00dev, PSCSR3, 0x00000002); - - rt2x00pci_register_read(rt2x00dev, TIMECSR, ®); - rt2x00_set_field32(®, TIMECSR_US_COUNT, 33); - rt2x00_set_field32(®, TIMECSR_US_64_COUNT, 63); - rt2x00_set_field32(®, TIMECSR_BEACON_EXPECT, 0); - rt2x00pci_register_write(rt2x00dev, TIMECSR, reg); - - rt2x00pci_register_read(rt2x00dev, CSR9, ®); - rt2x00_set_field32(®, CSR9_MAX_FRAME_UNIT, - (rt2x00dev->rx->data_size / 128)); - rt2x00pci_register_write(rt2x00dev, CSR9, reg); - - rt2x00pci_register_write(rt2x00dev, CNT3, 0x3f080000); - - rt2x00pci_register_read(rt2x00dev, ARCSR0, ®); - rt2x00_set_field32(®, ARCSR0_AR_BBP_DATA0, 133); - rt2x00_set_field32(®, ARCSR0_AR_BBP_ID0, 134); - rt2x00_set_field32(®, ARCSR0_AR_BBP_DATA1, 136); - rt2x00_set_field32(®, ARCSR0_AR_BBP_ID1, 135); - rt2x00pci_register_write(rt2x00dev, ARCSR0, reg); - - rt2x00pci_register_read(rt2x00dev, RXCSR3, ®); - rt2x00_set_field32(®, RXCSR3_BBP_ID0, 3); /* Tx power.*/ - rt2x00_set_field32(®, RXCSR3_BBP_ID0_VALID, 1); - rt2x00_set_field32(®, RXCSR3_BBP_ID1, 32); /* Signal */ - rt2x00_set_field32(®, RXCSR3_BBP_ID1_VALID, 1); - rt2x00_set_field32(®, RXCSR3_BBP_ID2, 36); /* Rssi */ - rt2x00_set_field32(®, RXCSR3_BBP_ID2_VALID, 1); - rt2x00pci_register_write(rt2x00dev, RXCSR3, reg); - - rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0x3f3b3100); - - if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) - return -EBUSY; - - rt2x00pci_register_write(rt2x00dev, MACCSR0, 0x00217223); - rt2x00pci_register_write(rt2x00dev, MACCSR1, 0x00235518); - - rt2x00pci_register_read(rt2x00dev, MACCSR2, ®); - rt2x00_set_field32(®, MACCSR2_DELAY, 64); - rt2x00pci_register_write(rt2x00dev, MACCSR2, reg); - - rt2x00pci_register_read(rt2x00dev, RALINKCSR, ®); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_DATA0, 17); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_ID0, 154); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_DATA1, 0); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_ID1, 154); - rt2x00pci_register_write(rt2x00dev, RALINKCSR, reg); - - rt2x00pci_register_read(rt2x00dev, CSR1, ®); - rt2x00_set_field32(®, CSR1_SOFT_RESET, 1); - rt2x00_set_field32(®, CSR1_BBP_RESET, 0); - rt2x00_set_field32(®, CSR1_HOST_READY, 0); - rt2x00pci_register_write(rt2x00dev, CSR1, reg); - - rt2x00pci_register_read(rt2x00dev, CSR1, ®); - rt2x00_set_field32(®, CSR1_SOFT_RESET, 0); - rt2x00_set_field32(®, CSR1_HOST_READY, 1); - rt2x00pci_register_write(rt2x00dev, CSR1, reg); - - /* - * We must clear the FCS and FIFO error count. - * These registers are cleared on read, - * so we may pass a useless variable to store the value. - */ - rt2x00pci_register_read(rt2x00dev, CNT0, ®); - rt2x00pci_register_read(rt2x00dev, CNT4, ®); - - return 0; -} - -static int rt2400pci_init_bbp(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u16 eeprom; - u8 reg_id; - u8 value; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2400pci_bbp_read(rt2x00dev, 0, &value); - if ((value != 0xff) && (value != 0x00)) - goto continue_csr_init; - NOTICE(rt2x00dev, "Waiting for BBP register.\n"); - udelay(REGISTER_BUSY_DELAY); - } - - ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); - return -EACCES; - -continue_csr_init: - rt2400pci_bbp_write(rt2x00dev, 1, 0x00); - rt2400pci_bbp_write(rt2x00dev, 3, 0x27); - rt2400pci_bbp_write(rt2x00dev, 4, 0x08); - rt2400pci_bbp_write(rt2x00dev, 10, 0x0f); - rt2400pci_bbp_write(rt2x00dev, 15, 0x72); - rt2400pci_bbp_write(rt2x00dev, 16, 0x74); - rt2400pci_bbp_write(rt2x00dev, 17, 0x20); - rt2400pci_bbp_write(rt2x00dev, 18, 0x72); - rt2400pci_bbp_write(rt2x00dev, 19, 0x0b); - rt2400pci_bbp_write(rt2x00dev, 20, 0x00); - rt2400pci_bbp_write(rt2x00dev, 28, 0x11); - rt2400pci_bbp_write(rt2x00dev, 29, 0x04); - rt2400pci_bbp_write(rt2x00dev, 30, 0x21); - rt2400pci_bbp_write(rt2x00dev, 31, 0x00); - - DEBUG(rt2x00dev, "Start initialization from EEPROM...\n"); - for (i = 0; i < EEPROM_BBP_SIZE; i++) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); - - if (eeprom != 0xffff && eeprom != 0x0000) { - reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); - value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); - DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n", - reg_id, value); - rt2400pci_bbp_write(rt2x00dev, reg_id, value); - } - } - DEBUG(rt2x00dev, "...End initialization from EEPROM.\n"); - - return 0; -} - -/* - * Device state switch handlers. - */ -static void rt2400pci_toggle_rx(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, RXCSR0, ®); - rt2x00_set_field32(®, RXCSR0_DISABLE_RX, - state == STATE_RADIO_RX_OFF); - rt2x00pci_register_write(rt2x00dev, RXCSR0, reg); -} - -static void rt2400pci_toggle_irq(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - int mask = (state == STATE_RADIO_IRQ_OFF); - u32 reg; - - /* - * When interrupts are being enabled, the interrupt registers - * should clear the register to assure a clean state. - */ - if (state == STATE_RADIO_IRQ_ON) { - rt2x00pci_register_read(rt2x00dev, CSR7, ®); - rt2x00pci_register_write(rt2x00dev, CSR7, reg); - } - - /* - * Only toggle the interrupts bits we are going to use. - * Non-checked interrupt bits are disabled by default. - */ - rt2x00pci_register_read(rt2x00dev, CSR8, ®); - rt2x00_set_field32(®, CSR8_TBCN_EXPIRE, mask); - rt2x00_set_field32(®, CSR8_TXDONE_TXRING, mask); - rt2x00_set_field32(®, CSR8_TXDONE_ATIMRING, mask); - rt2x00_set_field32(®, CSR8_TXDONE_PRIORING, mask); - rt2x00_set_field32(®, CSR8_RXDONE, mask); - rt2x00pci_register_write(rt2x00dev, CSR8, reg); -} - -static int rt2400pci_enable_radio(struct rt2x00_dev *rt2x00dev) -{ - /* - * Initialize all registers. - */ - if (rt2400pci_init_rings(rt2x00dev) || - rt2400pci_init_registers(rt2x00dev) || - rt2400pci_init_bbp(rt2x00dev)) { - ERROR(rt2x00dev, "Register initialization failed.\n"); - return -EIO; - } - - /* - * Enable interrupts. - */ - rt2400pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON); - - /* - * Enable LED - */ - rt2400pci_enable_led(rt2x00dev); - - return 0; -} - -static void rt2400pci_disable_radio(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - /* - * Disable LED - */ - rt2400pci_disable_led(rt2x00dev); - - rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0); - - /* - * Disable synchronisation. - */ - rt2x00pci_register_write(rt2x00dev, CSR14, 0); - - /* - * Cancel RX and TX. - */ - rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); - rt2x00_set_field32(®, TXCSR0_ABORT, 1); - rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); - - /* - * Disable interrupts. - */ - rt2400pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF); -} - -static int rt2400pci_set_state(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - u32 reg; - unsigned int i; - char put_to_sleep; - char bbp_state; - char rf_state; - - put_to_sleep = (state != STATE_AWAKE); - - rt2x00pci_register_read(rt2x00dev, PWRCSR1, ®); - rt2x00_set_field32(®, PWRCSR1_SET_STATE, 1); - rt2x00_set_field32(®, PWRCSR1_BBP_DESIRE_STATE, state); - rt2x00_set_field32(®, PWRCSR1_RF_DESIRE_STATE, state); - rt2x00_set_field32(®, PWRCSR1_PUT_TO_SLEEP, put_to_sleep); - rt2x00pci_register_write(rt2x00dev, PWRCSR1, reg); - - /* - * Device is not guaranteed to be in the requested state yet. - * We must wait until the register indicates that the - * device has entered the correct state. - */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, PWRCSR1, ®); - bbp_state = rt2x00_get_field32(reg, PWRCSR1_BBP_CURR_STATE); - rf_state = rt2x00_get_field32(reg, PWRCSR1_RF_CURR_STATE); - if (bbp_state == state && rf_state == state) - return 0; - msleep(10); - } - - NOTICE(rt2x00dev, "Device failed to enter state %d, " - "current device state: bbp %d and rf %d.\n", - state, bbp_state, rf_state); - - return -EBUSY; -} - -static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - int retval = 0; - - switch (state) { - case STATE_RADIO_ON: - retval = rt2400pci_enable_radio(rt2x00dev); - break; - case STATE_RADIO_OFF: - rt2400pci_disable_radio(rt2x00dev); - break; - case STATE_RADIO_RX_ON: - case STATE_RADIO_RX_OFF: - rt2400pci_toggle_rx(rt2x00dev, state); - break; - case STATE_DEEP_SLEEP: - case STATE_SLEEP: - case STATE_STANDBY: - case STATE_AWAKE: - retval = rt2400pci_set_state(rt2x00dev, state); - break; - default: - retval = -ENOTSUPP; - break; - } - - return retval; -} - -/* - * TX descriptor initialization - */ -static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct data_desc *txd, - struct txdata_entry_desc *desc, - struct ieee80211_hdr *ieee80211hdr, - unsigned int length, - struct ieee80211_tx_control *control) -{ - u32 word; - u32 signal = 0; - u32 service = 0; - u32 length_high = 0; - u32 length_low = 0; - - /* - * The PLCP values should be treated as if they - * were BBP values. - */ - rt2x00_set_field32(&signal, BBPCSR_VALUE, desc->signal); - rt2x00_set_field32(&signal, BBPCSR_REGNUM, 5); - rt2x00_set_field32(&signal, BBPCSR_BUSY, 1); - - rt2x00_set_field32(&service, BBPCSR_VALUE, desc->service); - rt2x00_set_field32(&service, BBPCSR_REGNUM, 6); - rt2x00_set_field32(&service, BBPCSR_BUSY, 1); - - rt2x00_set_field32(&length_high, BBPCSR_VALUE, desc->length_high); - rt2x00_set_field32(&length_high, BBPCSR_REGNUM, 7); - rt2x00_set_field32(&length_high, BBPCSR_BUSY, 1); - - rt2x00_set_field32(&length_low, BBPCSR_VALUE, desc->length_low); - rt2x00_set_field32(&length_low, BBPCSR_REGNUM, 8); - rt2x00_set_field32(&length_low, BBPCSR_BUSY, 1); - - /* - * Start writing the descriptor words. - */ - rt2x00_desc_read(txd, 2, &word); - rt2x00_set_field32(&word, TXD_W2_DATABYTE_COUNT, length); - rt2x00_desc_write(txd, 2, word); - - rt2x00_desc_read(txd, 3, &word); - rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, signal); - rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, service); - rt2x00_desc_write(txd, 3, word); - - rt2x00_desc_read(txd, 4, &word); - rt2x00_set_field32(&word, TXD_W4_PLCP_LENGTH_LOW, length_low); - rt2x00_set_field32(&word, TXD_W4_PLCP_LENGTH_HIGH, length_high); - rt2x00_desc_write(txd, 4, word); - - rt2x00_desc_read(txd, 0, &word); - rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1); - rt2x00_set_field32(&word, TXD_W0_VALID, 1); - rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, - test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags)); - rt2x00_set_field32(&word, TXD_W0_ACK, - !(control->flags & IEEE80211_TXCTL_NO_ACK)); - rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, - test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags)); - rt2x00_set_field32(&word, TXD_W0_RTS, - test_bit(ENTRY_TXD_RTS_FRAME, &desc->flags)); - rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs); - rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, - !!(control->flags & - IEEE80211_TXCTL_LONG_RETRY_LIMIT)); - rt2x00_desc_write(txd, 0, word); -} - -/* - * TX data initialization - */ -static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - unsigned int queue) -{ - u32 reg; - - if (queue == IEEE80211_TX_QUEUE_BEACON) { - rt2x00pci_register_read(rt2x00dev, CSR14, ®); - if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) { - rt2x00_set_field32(®, CSR14_BEACON_GEN, 1); - rt2x00pci_register_write(rt2x00dev, CSR14, reg); - } - return; - } - - rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); - if (queue == IEEE80211_TX_QUEUE_DATA0) - rt2x00_set_field32(®, TXCSR0_KICK_PRIO, 1); - else if (queue == IEEE80211_TX_QUEUE_DATA1) - rt2x00_set_field32(®, TXCSR0_KICK_TX, 1); - else if (queue == IEEE80211_TX_QUEUE_AFTER_BEACON) - rt2x00_set_field32(®, TXCSR0_KICK_ATIM, 1); - rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); -} - -/* - * RX control handlers - */ -static void rt2400pci_fill_rxdone(struct data_entry *entry, - struct rxdata_entry_desc *desc) -{ - struct data_desc *rxd = entry->priv; - u32 word0; - u32 word2; - - rt2x00_desc_read(rxd, 0, &word0); - rt2x00_desc_read(rxd, 2, &word2); - - desc->flags = 0; - if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) - desc->flags |= RX_FLAG_FAILED_FCS_CRC; - if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR)) - desc->flags |= RX_FLAG_FAILED_PLCP_CRC; - - /* - * Obtain the status about this packet. - */ - desc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL); - desc->rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) - - entry->ring->rt2x00dev->rssi_offset; - desc->ofdm = 0; - desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); -} - -/* - * Interrupt functions. - */ -static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev, const int queue) -{ - struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue); - struct data_entry *entry; - struct data_desc *txd; - u32 word; - int tx_status; - int retry; - - while (!rt2x00_ring_empty(ring)) { - entry = rt2x00_get_data_entry_done(ring); - txd = entry->priv; - rt2x00_desc_read(txd, 0, &word); - - if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || - !rt2x00_get_field32(word, TXD_W0_VALID)) - break; - - /* - * Obtain the status about this packet. - */ - tx_status = rt2x00_get_field32(word, TXD_W0_RESULT); - retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT); - - rt2x00lib_txdone(entry, tx_status, retry); - - /* - * Make this entry available for reuse. - */ - entry->flags = 0; - rt2x00_set_field32(&word, TXD_W0_VALID, 0); - rt2x00_desc_write(txd, 0, word); - rt2x00_ring_index_done_inc(ring); - } - - /* - * If the data ring was full before the txdone handler - * we must make sure the packet queue in the mac80211 stack - * is reenabled when the txdone handler has finished. - */ - entry = ring->entry; - if (!rt2x00_ring_full(ring)) - ieee80211_wake_queue(rt2x00dev->hw, - entry->tx_status.control.queue); -} - -static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance) -{ - struct rt2x00_dev *rt2x00dev = dev_instance; - u32 reg; - - /* - * Get the interrupt sources & saved to local variable. - * Write register value back to clear pending interrupts. - */ - rt2x00pci_register_read(rt2x00dev, CSR7, ®); - rt2x00pci_register_write(rt2x00dev, CSR7, reg); - - if (!reg) - return IRQ_NONE; - - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) - return IRQ_HANDLED; - - /* - * Handle interrupts, walk through all bits - * and run the tasks, the bits are checked in order of - * priority. - */ - - /* - * 1 - Beacon timer expired interrupt. - */ - if (rt2x00_get_field32(reg, CSR7_TBCN_EXPIRE)) - rt2x00lib_beacondone(rt2x00dev); - - /* - * 2 - Rx ring done interrupt. - */ - if (rt2x00_get_field32(reg, CSR7_RXDONE)) - rt2x00pci_rxdone(rt2x00dev); - - /* - * 3 - Atim ring transmit done interrupt. - */ - if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING)) - rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON); - - /* - * 4 - Priority ring transmit done interrupt. - */ - if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING)) - rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA0); - - /* - * 5 - Tx ring transmit done interrupt. - */ - if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING)) - rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA1); - - return IRQ_HANDLED; -} - -/* - * Device probe functions. - */ -static int rt2400pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) -{ - struct eeprom_93cx6 eeprom; - u32 reg; - u16 word; - u8 *mac; - - rt2x00pci_register_read(rt2x00dev, CSR21, ®); - - eeprom.data = rt2x00dev; - eeprom.register_read = rt2400pci_eepromregister_read; - eeprom.register_write = rt2400pci_eepromregister_write; - eeprom.width = rt2x00_get_field32(reg, CSR21_TYPE_93C46) ? - PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66; - eeprom.reg_data_in = 0; - eeprom.reg_data_out = 0; - eeprom.reg_data_clock = 0; - eeprom.reg_chip_select = 0; - - eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, - EEPROM_SIZE / sizeof(u16)); - - /* - * Start validation of the data that has been read. - */ - mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); - if (!is_valid_ether_addr(mac)) { - DECLARE_MAC_BUF(macbuf); - - random_ether_addr(mac); - EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac)); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); - if (word == 0xffff) { - ERROR(rt2x00dev, "Invalid EEPROM data detected.\n"); - return -EINVAL; - } - - return 0; -} - -static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - u16 value; - u16 eeprom; - - /* - * Read EEPROM word for configuration. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); - - /* - * Identify RF chipset. - */ - value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); - rt2x00pci_register_read(rt2x00dev, CSR0, ®); - rt2x00_set_chip(rt2x00dev, RT2460, value, reg); - - if (!rt2x00_rf(&rt2x00dev->chip, RF2420) && - !rt2x00_rf(&rt2x00dev->chip, RF2421)) { - ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); - return -ENODEV; - } - - /* - * Identify default antenna configuration. - */ - rt2x00dev->hw->conf.antenna_sel_tx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT); - rt2x00dev->hw->conf.antenna_sel_rx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT); - - /* - * Store led mode, for correct led behaviour. - */ - rt2x00dev->led_mode = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); - - /* - * Detect if this device has an hardware controlled radio. - */ -#ifdef CONFIG_RT2400PCI_RFKILL - if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) - __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); -#endif /* CONFIG_RT2400PCI_RFKILL */ - - /* - * Check if the BBP tuning should be enabled. - */ - if (!rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_AGCVGC_TUNING)) - __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags); - - return 0; -} - -/* - * RF value list for RF2420 & RF2421 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg[] = { - { 1, 0x00022058, 0x000c1fda, 0x00000101, 0 }, - { 2, 0x00022058, 0x000c1fee, 0x00000101, 0 }, - { 3, 0x00022058, 0x000c2002, 0x00000101, 0 }, - { 4, 0x00022058, 0x000c2016, 0x00000101, 0 }, - { 5, 0x00022058, 0x000c202a, 0x00000101, 0 }, - { 6, 0x00022058, 0x000c203e, 0x00000101, 0 }, - { 7, 0x00022058, 0x000c2052, 0x00000101, 0 }, - { 8, 0x00022058, 0x000c2066, 0x00000101, 0 }, - { 9, 0x00022058, 0x000c207a, 0x00000101, 0 }, - { 10, 0x00022058, 0x000c208e, 0x00000101, 0 }, - { 11, 0x00022058, 0x000c20a2, 0x00000101, 0 }, - { 12, 0x00022058, 0x000c20b6, 0x00000101, 0 }, - { 13, 0x00022058, 0x000c20ca, 0x00000101, 0 }, - { 14, 0x00022058, 0x000c20fa, 0x00000101, 0 }, -}; - -static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) -{ - struct hw_mode_spec *spec = &rt2x00dev->spec; - u8 *txpower; - unsigned int i; - - /* - * Initialize all hw fields. - */ - rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING; - rt2x00dev->hw->extra_tx_headroom = 0; - rt2x00dev->hw->max_signal = MAX_SIGNAL; - rt2x00dev->hw->max_rssi = MAX_RX_SSI; - rt2x00dev->hw->queues = 2; - - SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev); - SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, - rt2x00_eeprom_addr(rt2x00dev, - EEPROM_MAC_ADDR_0)); - - /* - * Convert tx_power array in eeprom. - */ - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); - for (i = 0; i < 14; i++) - txpower[i] = TXPOWER_FROM_DEV(txpower[i]); - - /* - * Initialize hw_mode information. - */ - spec->num_modes = 1; - spec->num_rates = 4; - spec->tx_power_a = NULL; - spec->tx_power_bg = txpower; - spec->tx_power_default = DEFAULT_TXPOWER; - - spec->num_channels = ARRAY_SIZE(rf_vals_bg); - spec->channels = rf_vals_bg; -} - -static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev) -{ - int retval; - - /* - * Allocate eeprom data. - */ - retval = rt2400pci_validate_eeprom(rt2x00dev); - if (retval) - return retval; - - retval = rt2400pci_init_eeprom(rt2x00dev); - if (retval) - return retval; - - /* - * Initialize hw specifications. - */ - rt2400pci_probe_hw_mode(rt2x00dev); - - /* - * This device requires the beacon ring - */ - __set_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags); - - /* - * Set the rssi offset. - */ - rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; - - return 0; -} - -/* - * IEEE80211 stack callback functions. - */ -static void rt2400pci_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - int mc_count, - struct dev_addr_list *mc_list) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct interface *intf = &rt2x00dev->interface; - u32 reg; - - /* - * Mask off any flags we are going to ignore from - * the total_flags field. - */ - *total_flags &= - FIF_ALLMULTI | - FIF_FCSFAIL | - FIF_PLCPFAIL | - FIF_CONTROL | - FIF_OTHER_BSS | - FIF_PROMISC_IN_BSS; - - /* - * Apply some rules to the filters: - * - Some filters imply different filters to be set. - * - Some things we can't filter out at all. - * - Some filters are set based on interface type. - */ - *total_flags |= FIF_ALLMULTI; - if (*total_flags & FIF_OTHER_BSS || - *total_flags & FIF_PROMISC_IN_BSS) - *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS; - if (is_interface_type(intf, IEEE80211_IF_TYPE_AP)) - *total_flags |= FIF_PROMISC_IN_BSS; - - /* - * Check if there is any work left for us. - */ - if (intf->filter == *total_flags) - return; - intf->filter = *total_flags; - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * since there is no filter for it at this time. - */ - rt2x00pci_register_read(rt2x00dev, RXCSR0, ®); - rt2x00_set_field32(®, RXCSR0_DROP_CRC, - !(*total_flags & FIF_FCSFAIL)); - rt2x00_set_field32(®, RXCSR0_DROP_PHYSICAL, - !(*total_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, - !(*total_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, RXCSR0_DROP_TODS, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1); - rt2x00pci_register_write(rt2x00dev, RXCSR0, reg); -} - -static int rt2400pci_set_retry_limit(struct ieee80211_hw *hw, - u32 short_retry, u32 long_retry) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - - rt2x00pci_register_read(rt2x00dev, CSR11, ®); - rt2x00_set_field32(®, CSR11_LONG_RETRY, long_retry); - rt2x00_set_field32(®, CSR11_SHORT_RETRY, short_retry); - rt2x00pci_register_write(rt2x00dev, CSR11, reg); - - return 0; -} - -static int rt2400pci_conf_tx(struct ieee80211_hw *hw, - int queue, - const struct ieee80211_tx_queue_params *params) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - - /* - * We don't support variating cw_min and cw_max variables - * per queue. So by default we only configure the TX queue, - * and ignore all other configurations. - */ - if (queue != IEEE80211_TX_QUEUE_DATA0) - return -EINVAL; - - if (rt2x00mac_conf_tx(hw, queue, params)) - return -EINVAL; - - /* - * Write configuration to register. - */ - rt2400pci_config_cw(rt2x00dev, &rt2x00dev->tx->tx_params); - - return 0; -} - -static u64 rt2400pci_get_tsf(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u64 tsf; - u32 reg; - - rt2x00pci_register_read(rt2x00dev, CSR17, ®); - tsf = (u64) rt2x00_get_field32(reg, CSR17_HIGH_TSFTIMER) << 32; - rt2x00pci_register_read(rt2x00dev, CSR16, ®); - tsf |= rt2x00_get_field32(reg, CSR16_LOW_TSFTIMER); - - return tsf; -} - -static void rt2400pci_reset_tsf(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - - rt2x00pci_register_write(rt2x00dev, CSR16, 0); - rt2x00pci_register_write(rt2x00dev, CSR17, 0); -} - -static int rt2400pci_tx_last_beacon(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - - rt2x00pci_register_read(rt2x00dev, CSR15, ®); - return rt2x00_get_field32(reg, CSR15_BEACON_SENT); -} - -static const struct ieee80211_ops rt2400pci_mac80211_ops = { - .tx = rt2x00mac_tx, - .start = rt2x00mac_start, - .stop = rt2x00mac_stop, - .add_interface = rt2x00mac_add_interface, - .remove_interface = rt2x00mac_remove_interface, - .config = rt2x00mac_config, - .config_interface = rt2x00mac_config_interface, - .configure_filter = rt2400pci_configure_filter, - .get_stats = rt2x00mac_get_stats, - .set_retry_limit = rt2400pci_set_retry_limit, - .erp_ie_changed = rt2x00mac_erp_ie_changed, - .conf_tx = rt2400pci_conf_tx, - .get_tx_stats = rt2x00mac_get_tx_stats, - .get_tsf = rt2400pci_get_tsf, - .reset_tsf = rt2400pci_reset_tsf, - .beacon_update = rt2x00pci_beacon_update, - .tx_last_beacon = rt2400pci_tx_last_beacon, -}; - -static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = { - .irq_handler = rt2400pci_interrupt, - .probe_hw = rt2400pci_probe_hw, - .initialize = rt2x00pci_initialize, - .uninitialize = rt2x00pci_uninitialize, - .set_device_state = rt2400pci_set_device_state, - .rfkill_poll = rt2400pci_rfkill_poll, - .link_stats = rt2400pci_link_stats, - .reset_tuner = rt2400pci_reset_tuner, - .link_tuner = rt2400pci_link_tuner, - .write_tx_desc = rt2400pci_write_tx_desc, - .write_tx_data = rt2x00pci_write_tx_data, - .kick_tx_queue = rt2400pci_kick_tx_queue, - .fill_rxdone = rt2400pci_fill_rxdone, - .config_mac_addr = rt2400pci_config_mac_addr, - .config_bssid = rt2400pci_config_bssid, - .config_type = rt2400pci_config_type, - .config_preamble = rt2400pci_config_preamble, - .config = rt2400pci_config, -}; - -static const struct rt2x00_ops rt2400pci_ops = { - .name = DRV_NAME, - .rxd_size = RXD_DESC_SIZE, - .txd_size = TXD_DESC_SIZE, - .eeprom_size = EEPROM_SIZE, - .rf_size = RF_SIZE, - .lib = &rt2400pci_rt2x00_ops, - .hw = &rt2400pci_mac80211_ops, -#ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt2400pci_rt2x00debug, -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -}; - -/* - * RT2400pci module information. - */ -static struct pci_device_id rt2400pci_device_table[] = { - { PCI_DEVICE(0x1814, 0x0101), PCI_DEVICE_DATA(&rt2400pci_ops) }, - { 0, } -}; - -MODULE_AUTHOR(DRV_PROJECT); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("Ralink RT2400 PCI & PCMCIA Wireless LAN driver."); -MODULE_SUPPORTED_DEVICE("Ralink RT2460 PCI & PCMCIA chipset based cards"); -MODULE_DEVICE_TABLE(pci, rt2400pci_device_table); -MODULE_LICENSE("GPL"); - -static struct pci_driver rt2400pci_driver = { - .name = DRV_NAME, - .id_table = rt2400pci_device_table, - .probe = rt2x00pci_probe, - .remove = __devexit_p(rt2x00pci_remove), - .suspend = rt2x00pci_suspend, - .resume = rt2x00pci_resume, -}; - -static int __init rt2400pci_init(void) -{ - return pci_register_driver(&rt2400pci_driver); -} - -static void __exit rt2400pci_exit(void) -{ - pci_unregister_driver(&rt2400pci_driver); -} - -module_init(rt2400pci_init); -module_exit(rt2400pci_exit); diff --git a/package/rt2x00/src/rt2400pci.h b/package/rt2x00/src/rt2400pci.h deleted file mode 100644 index ae22501f085..00000000000 --- a/package/rt2x00/src/rt2400pci.h +++ /dev/null @@ -1,943 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2400pci - Abstract: Data structures and registers for the rt2400pci module. - Supported chipsets: RT2460. - */ - -#ifndef RT2400PCI_H -#define RT2400PCI_H - -/* - * RF chip defines. - */ -#define RF2420 0x0000 -#define RF2421 0x0001 - -/* - * Signal information. - * Defaul offset is required for RSSI <-> dBm conversion. - */ -#define MAX_SIGNAL 100 -#define MAX_RX_SSI -1 -#define DEFAULT_RSSI_OFFSET 100 - -/* - * Register layout information. - */ -#define CSR_REG_BASE 0x0000 -#define CSR_REG_SIZE 0x014c -#define EEPROM_BASE 0x0000 -#define EEPROM_SIZE 0x0100 -#define BBP_SIZE 0x0020 -#define RF_SIZE 0x0010 - -/* - * Control/Status Registers(CSR). - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * CSR0: ASIC revision number. - */ -#define CSR0 0x0000 - -/* - * CSR1: System control register. - * SOFT_RESET: Software reset, 1: reset, 0: normal. - * BBP_RESET: Hardware reset, 1: reset, 0, release. - * HOST_READY: Host ready after initialization. - */ -#define CSR1 0x0004 -#define CSR1_SOFT_RESET FIELD32(0x00000001) -#define CSR1_BBP_RESET FIELD32(0x00000002) -#define CSR1_HOST_READY FIELD32(0x00000004) - -/* - * CSR2: System admin status register (invalid). - */ -#define CSR2 0x0008 - -/* - * CSR3: STA MAC address register 0. - */ -#define CSR3 0x000c -#define CSR3_BYTE0 FIELD32(0x000000ff) -#define CSR3_BYTE1 FIELD32(0x0000ff00) -#define CSR3_BYTE2 FIELD32(0x00ff0000) -#define CSR3_BYTE3 FIELD32(0xff000000) - -/* - * CSR4: STA MAC address register 1. - */ -#define CSR4 0x0010 -#define CSR4_BYTE4 FIELD32(0x000000ff) -#define CSR4_BYTE5 FIELD32(0x0000ff00) - -/* - * CSR5: BSSID register 0. - */ -#define CSR5 0x0014 -#define CSR5_BYTE0 FIELD32(0x000000ff) -#define CSR5_BYTE1 FIELD32(0x0000ff00) -#define CSR5_BYTE2 FIELD32(0x00ff0000) -#define CSR5_BYTE3 FIELD32(0xff000000) - -/* - * CSR6: BSSID register 1. - */ -#define CSR6 0x0018 -#define CSR6_BYTE4 FIELD32(0x000000ff) -#define CSR6_BYTE5 FIELD32(0x0000ff00) - -/* - * CSR7: Interrupt source register. - * Write 1 to clear interrupt. - * TBCN_EXPIRE: Beacon timer expired interrupt. - * TWAKE_EXPIRE: Wakeup timer expired interrupt. - * TATIMW_EXPIRE: Timer of atim window expired interrupt. - * TXDONE_TXRING: Tx ring transmit done interrupt. - * TXDONE_ATIMRING: Atim ring transmit done interrupt. - * TXDONE_PRIORING: Priority ring transmit done interrupt. - * RXDONE: Receive done interrupt. - */ -#define CSR7 0x001c -#define CSR7_TBCN_EXPIRE FIELD32(0x00000001) -#define CSR7_TWAKE_EXPIRE FIELD32(0x00000002) -#define CSR7_TATIMW_EXPIRE FIELD32(0x00000004) -#define CSR7_TXDONE_TXRING FIELD32(0x00000008) -#define CSR7_TXDONE_ATIMRING FIELD32(0x00000010) -#define CSR7_TXDONE_PRIORING FIELD32(0x00000020) -#define CSR7_RXDONE FIELD32(0x00000040) - -/* - * CSR8: Interrupt mask register. - * Write 1 to mask interrupt. - * TBCN_EXPIRE: Beacon timer expired interrupt. - * TWAKE_EXPIRE: Wakeup timer expired interrupt. - * TATIMW_EXPIRE: Timer of atim window expired interrupt. - * TXDONE_TXRING: Tx ring transmit done interrupt. - * TXDONE_ATIMRING: Atim ring transmit done interrupt. - * TXDONE_PRIORING: Priority ring transmit done interrupt. - * RXDONE: Receive done interrupt. - */ -#define CSR8 0x0020 -#define CSR8_TBCN_EXPIRE FIELD32(0x00000001) -#define CSR8_TWAKE_EXPIRE FIELD32(0x00000002) -#define CSR8_TATIMW_EXPIRE FIELD32(0x00000004) -#define CSR8_TXDONE_TXRING FIELD32(0x00000008) -#define CSR8_TXDONE_ATIMRING FIELD32(0x00000010) -#define CSR8_TXDONE_PRIORING FIELD32(0x00000020) -#define CSR8_RXDONE FIELD32(0x00000040) - -/* - * CSR9: Maximum frame length register. - * MAX_FRAME_UNIT: Maximum frame length in 128b unit, default: 12. - */ -#define CSR9 0x0024 -#define CSR9_MAX_FRAME_UNIT FIELD32(0x00000f80) - -/* - * CSR11: Back-off control register. - * CWMIN: CWmin. Default cwmin is 31 (2^5 - 1). - * CWMAX: CWmax. Default cwmax is 1023 (2^10 - 1). - * SLOT_TIME: Slot time, default is 20us for 802.11b. - * LONG_RETRY: Long retry count. - * SHORT_RETRY: Short retry count. - */ -#define CSR11 0x002c -#define CSR11_CWMIN FIELD32(0x0000000f) -#define CSR11_CWMAX FIELD32(0x000000f0) -#define CSR11_SLOT_TIME FIELD32(0x00001f00) -#define CSR11_LONG_RETRY FIELD32(0x00ff0000) -#define CSR11_SHORT_RETRY FIELD32(0xff000000) - -/* - * CSR12: Synchronization configuration register 0. - * All units in 1/16 TU. - * BEACON_INTERVAL: Beacon interval, default is 100 TU. - * CFPMAX_DURATION: Cfp maximum duration, default is 100 TU. - */ -#define CSR12 0x0030 -#define CSR12_BEACON_INTERVAL FIELD32(0x0000ffff) -#define CSR12_CFP_MAX_DURATION FIELD32(0xffff0000) - -/* - * CSR13: Synchronization configuration register 1. - * All units in 1/16 TU. - * ATIMW_DURATION: Atim window duration. - * CFP_PERIOD: Cfp period, default is 0 TU. - */ -#define CSR13 0x0034 -#define CSR13_ATIMW_DURATION FIELD32(0x0000ffff) -#define CSR13_CFP_PERIOD FIELD32(0x00ff0000) - -/* - * CSR14: Synchronization control register. - * TSF_COUNT: Enable tsf auto counting. - * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode. - * TBCN: Enable tbcn with reload value. - * TCFP: Enable tcfp & cfp / cp switching. - * TATIMW: Enable tatimw & atim window switching. - * BEACON_GEN: Enable beacon generator. - * CFP_COUNT_PRELOAD: Cfp count preload value. - * TBCM_PRELOAD: Tbcn preload value in units of 64us. - */ -#define CSR14 0x0038 -#define CSR14_TSF_COUNT FIELD32(0x00000001) -#define CSR14_TSF_SYNC FIELD32(0x00000006) -#define CSR14_TBCN FIELD32(0x00000008) -#define CSR14_TCFP FIELD32(0x00000010) -#define CSR14_TATIMW FIELD32(0x00000020) -#define CSR14_BEACON_GEN FIELD32(0x00000040) -#define CSR14_CFP_COUNT_PRELOAD FIELD32(0x0000ff00) -#define CSR14_TBCM_PRELOAD FIELD32(0xffff0000) - -/* - * CSR15: Synchronization status register. - * CFP: ASIC is in contention-free period. - * ATIMW: ASIC is in ATIM window. - * BEACON_SENT: Beacon is send. - */ -#define CSR15 0x003c -#define CSR15_CFP FIELD32(0x00000001) -#define CSR15_ATIMW FIELD32(0x00000002) -#define CSR15_BEACON_SENT FIELD32(0x00000004) - -/* - * CSR16: TSF timer register 0. - */ -#define CSR16 0x0040 -#define CSR16_LOW_TSFTIMER FIELD32(0xffffffff) - -/* - * CSR17: TSF timer register 1. - */ -#define CSR17 0x0044 -#define CSR17_HIGH_TSFTIMER FIELD32(0xffffffff) - -/* - * CSR18: IFS timer register 0. - * SIFS: Sifs, default is 10 us. - * PIFS: Pifs, default is 30 us. - */ -#define CSR18 0x0048 -#define CSR18_SIFS FIELD32(0x0000ffff) -#define CSR18_PIFS FIELD32(0xffff0000) - -/* - * CSR19: IFS timer register 1. - * DIFS: Difs, default is 50 us. - * EIFS: Eifs, default is 364 us. - */ -#define CSR19 0x004c -#define CSR19_DIFS FIELD32(0x0000ffff) -#define CSR19_EIFS FIELD32(0xffff0000) - -/* - * CSR20: Wakeup timer register. - * DELAY_AFTER_TBCN: Delay after tbcn expired in units of 1/16 TU. - * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup. - * AUTOWAKE: Enable auto wakeup / sleep mechanism. - */ -#define CSR20 0x0050 -#define CSR20_DELAY_AFTER_TBCN FIELD32(0x0000ffff) -#define CSR20_TBCN_BEFORE_WAKEUP FIELD32(0x00ff0000) -#define CSR20_AUTOWAKE FIELD32(0x01000000) - -/* - * CSR21: EEPROM control register. - * RELOAD: Write 1 to reload eeprom content. - * TYPE_93C46: 1: 93c46, 0:93c66. - */ -#define CSR21 0x0054 -#define CSR21_RELOAD FIELD32(0x00000001) -#define CSR21_EEPROM_DATA_CLOCK FIELD32(0x00000002) -#define CSR21_EEPROM_CHIP_SELECT FIELD32(0x00000004) -#define CSR21_EEPROM_DATA_IN FIELD32(0x00000008) -#define CSR21_EEPROM_DATA_OUT FIELD32(0x00000010) -#define CSR21_TYPE_93C46 FIELD32(0x00000020) - -/* - * CSR22: CFP control register. - * CFP_DURATION_REMAIN: Cfp duration remain, in units of TU. - * RELOAD_CFP_DURATION: Write 1 to reload cfp duration remain. - */ -#define CSR22 0x0058 -#define CSR22_CFP_DURATION_REMAIN FIELD32(0x0000ffff) -#define CSR22_RELOAD_CFP_DURATION FIELD32(0x00010000) - -/* - * Transmit related CSRs. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * TXCSR0: TX Control Register. - * KICK_TX: Kick tx ring. - * KICK_ATIM: Kick atim ring. - * KICK_PRIO: Kick priority ring. - * ABORT: Abort all transmit related ring operation. - */ -#define TXCSR0 0x0060 -#define TXCSR0_KICK_TX FIELD32(0x00000001) -#define TXCSR0_KICK_ATIM FIELD32(0x00000002) -#define TXCSR0_KICK_PRIO FIELD32(0x00000004) -#define TXCSR0_ABORT FIELD32(0x00000008) - -/* - * TXCSR1: TX Configuration Register. - * ACK_TIMEOUT: Ack timeout, default = sifs + 2*slottime + acktime @ 1mbps. - * ACK_CONSUME_TIME: Ack consume time, default = sifs + acktime @ 1mbps. - * TSF_OFFSET: Insert tsf offset. - * AUTORESPONDER: Enable auto responder which include ack & cts. - */ -#define TXCSR1 0x0064 -#define TXCSR1_ACK_TIMEOUT FIELD32(0x000001ff) -#define TXCSR1_ACK_CONSUME_TIME FIELD32(0x0003fe00) -#define TXCSR1_TSF_OFFSET FIELD32(0x00fc0000) -#define TXCSR1_AUTORESPONDER FIELD32(0x01000000) - -/* - * TXCSR2: Tx descriptor configuration register. - * TXD_SIZE: Tx descriptor size, default is 48. - * NUM_TXD: Number of tx entries in ring. - * NUM_ATIM: Number of atim entries in ring. - * NUM_PRIO: Number of priority entries in ring. - */ -#define TXCSR2 0x0068 -#define TXCSR2_TXD_SIZE FIELD32(0x000000ff) -#define TXCSR2_NUM_TXD FIELD32(0x0000ff00) -#define TXCSR2_NUM_ATIM FIELD32(0x00ff0000) -#define TXCSR2_NUM_PRIO FIELD32(0xff000000) - -/* - * TXCSR3: TX Ring Base address register. - */ -#define TXCSR3 0x006c -#define TXCSR3_TX_RING_REGISTER FIELD32(0xffffffff) - -/* - * TXCSR4: TX Atim Ring Base address register. - */ -#define TXCSR4 0x0070 -#define TXCSR4_ATIM_RING_REGISTER FIELD32(0xffffffff) - -/* - * TXCSR5: TX Prio Ring Base address register. - */ -#define TXCSR5 0x0074 -#define TXCSR5_PRIO_RING_REGISTER FIELD32(0xffffffff) - -/* - * TXCSR6: Beacon Base address register. - */ -#define TXCSR6 0x0078 -#define TXCSR6_BEACON_RING_REGISTER FIELD32(0xffffffff) - -/* - * TXCSR7: Auto responder control register. - * AR_POWERMANAGEMENT: Auto responder power management bit. - */ -#define TXCSR7 0x007c -#define TXCSR7_AR_POWERMANAGEMENT FIELD32(0x00000001) - -/* - * Receive related CSRs. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * RXCSR0: RX Control Register. - * DISABLE_RX: Disable rx engine. - * DROP_CRC: Drop crc error. - * DROP_PHYSICAL: Drop physical error. - * DROP_CONTROL: Drop control frame. - * DROP_NOT_TO_ME: Drop not to me unicast frame. - * DROP_TODS: Drop frame tods bit is true. - * DROP_VERSION_ERROR: Drop version error frame. - * PASS_CRC: Pass all packets with crc attached. - */ -#define RXCSR0 0x0080 -#define RXCSR0_DISABLE_RX FIELD32(0x00000001) -#define RXCSR0_DROP_CRC FIELD32(0x00000002) -#define RXCSR0_DROP_PHYSICAL FIELD32(0x00000004) -#define RXCSR0_DROP_CONTROL FIELD32(0x00000008) -#define RXCSR0_DROP_NOT_TO_ME FIELD32(0x00000010) -#define RXCSR0_DROP_TODS FIELD32(0x00000020) -#define RXCSR0_DROP_VERSION_ERROR FIELD32(0x00000040) -#define RXCSR0_PASS_CRC FIELD32(0x00000080) - -/* - * RXCSR1: RX descriptor configuration register. - * RXD_SIZE: Rx descriptor size, default is 32b. - * NUM_RXD: Number of rx entries in ring. - */ -#define RXCSR1 0x0084 -#define RXCSR1_RXD_SIZE FIELD32(0x000000ff) -#define RXCSR1_NUM_RXD FIELD32(0x0000ff00) - -/* - * RXCSR2: RX Ring base address register. - */ -#define RXCSR2 0x0088 -#define RXCSR2_RX_RING_REGISTER FIELD32(0xffffffff) - -/* - * RXCSR3: BBP ID register for Rx operation. - * BBP_ID#: BBP register # id. - * BBP_ID#_VALID: BBP register # id is valid or not. - */ -#define RXCSR3 0x0090 -#define RXCSR3_BBP_ID0 FIELD32(0x0000007f) -#define RXCSR3_BBP_ID0_VALID FIELD32(0x00000080) -#define RXCSR3_BBP_ID1 FIELD32(0x00007f00) -#define RXCSR3_BBP_ID1_VALID FIELD32(0x00008000) -#define RXCSR3_BBP_ID2 FIELD32(0x007f0000) -#define RXCSR3_BBP_ID2_VALID FIELD32(0x00800000) -#define RXCSR3_BBP_ID3 FIELD32(0x7f000000) -#define RXCSR3_BBP_ID3_VALID FIELD32(0x80000000) - -/* - * RXCSR4: BBP ID register for Rx operation. - * BBP_ID#: BBP register # id. - * BBP_ID#_VALID: BBP register # id is valid or not. - */ -#define RXCSR4 0x0094 -#define RXCSR4_BBP_ID4 FIELD32(0x0000007f) -#define RXCSR4_BBP_ID4_VALID FIELD32(0x00000080) -#define RXCSR4_BBP_ID5 FIELD32(0x00007f00) -#define RXCSR4_BBP_ID5_VALID FIELD32(0x00008000) - -/* - * ARCSR0: Auto Responder PLCP config register 0. - * ARCSR0_AR_BBP_DATA#: Auto responder BBP register # data. - * ARCSR0_AR_BBP_ID#: Auto responder BBP register # Id. - */ -#define ARCSR0 0x0098 -#define ARCSR0_AR_BBP_DATA0 FIELD32(0x000000ff) -#define ARCSR0_AR_BBP_ID0 FIELD32(0x0000ff00) -#define ARCSR0_AR_BBP_DATA1 FIELD32(0x00ff0000) -#define ARCSR0_AR_BBP_ID1 FIELD32(0xff000000) - -/* - * ARCSR1: Auto Responder PLCP config register 1. - * ARCSR0_AR_BBP_DATA#: Auto responder BBP register # data. - * ARCSR0_AR_BBP_ID#: Auto responder BBP register # Id. - */ -#define ARCSR1 0x009c -#define ARCSR1_AR_BBP_DATA2 FIELD32(0x000000ff) -#define ARCSR1_AR_BBP_ID2 FIELD32(0x0000ff00) -#define ARCSR1_AR_BBP_DATA3 FIELD32(0x00ff0000) -#define ARCSR1_AR_BBP_ID3 FIELD32(0xff000000) - -/* - * Miscellaneous Registers. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * PCICSR: PCI control register. - * BIG_ENDIAN: 1: big endian, 0: little endian. - * RX_TRESHOLD: Rx threshold in dw to start pci access - * 0: 16dw (default), 1: 8dw, 2: 4dw, 3: 32dw. - * TX_TRESHOLD: Tx threshold in dw to start pci access - * 0: 0dw (default), 1: 1dw, 2: 4dw, 3: forward. - * BURST_LENTH: Pci burst length 0: 4dw (default, 1: 8dw, 2: 16dw, 3:32dw. - * ENABLE_CLK: Enable clk_run, pci clock can't going down to non-operational. - */ -#define PCICSR 0x008c -#define PCICSR_BIG_ENDIAN FIELD32(0x00000001) -#define PCICSR_RX_TRESHOLD FIELD32(0x00000006) -#define PCICSR_TX_TRESHOLD FIELD32(0x00000018) -#define PCICSR_BURST_LENTH FIELD32(0x00000060) -#define PCICSR_ENABLE_CLK FIELD32(0x00000080) - -/* - * CNT0: FCS error count. - * FCS_ERROR: FCS error count, cleared when read. - */ -#define CNT0 0x00a0 -#define CNT0_FCS_ERROR FIELD32(0x0000ffff) - -/* - * Statistic Register. - * CNT1: PLCP error count. - * CNT2: Long error count. - * CNT3: CCA false alarm count. - * CNT4: Rx FIFO overflow count. - * CNT5: Tx FIFO underrun count. - */ -#define TIMECSR2 0x00a8 -#define CNT1 0x00ac -#define CNT2 0x00b0 -#define TIMECSR3 0x00b4 -#define CNT3 0x00b8 -#define CNT4 0x00bc -#define CNT5 0x00c0 - -/* - * Baseband Control Register. - */ - -/* - * PWRCSR0: Power mode configuration register. - */ -#define PWRCSR0 0x00c4 - -/* - * Power state transition time registers. - */ -#define PSCSR0 0x00c8 -#define PSCSR1 0x00cc -#define PSCSR2 0x00d0 -#define PSCSR3 0x00d4 - -/* - * PWRCSR1: Manual power control / status register. - * Allowed state: 0 deep_sleep, 1: sleep, 2: standby, 3: awake. - * SET_STATE: Set state. Write 1 to trigger, self cleared. - * BBP_DESIRE_STATE: BBP desired state. - * RF_DESIRE_STATE: RF desired state. - * BBP_CURR_STATE: BBP current state. - * RF_CURR_STATE: RF current state. - * PUT_TO_SLEEP: Put to sleep. Write 1 to trigger, self cleared. - */ -#define PWRCSR1 0x00d8 -#define PWRCSR1_SET_STATE FIELD32(0x00000001) -#define PWRCSR1_BBP_DESIRE_STATE FIELD32(0x00000006) -#define PWRCSR1_RF_DESIRE_STATE FIELD32(0x00000018) -#define PWRCSR1_BBP_CURR_STATE FIELD32(0x00000060) -#define PWRCSR1_RF_CURR_STATE FIELD32(0x00000180) -#define PWRCSR1_PUT_TO_SLEEP FIELD32(0x00000200) - -/* - * TIMECSR: Timer control register. - * US_COUNT: 1 us timer count in units of clock cycles. - * US_64_COUNT: 64 us timer count in units of 1 us timer. - * BEACON_EXPECT: Beacon expect window. - */ -#define TIMECSR 0x00dc -#define TIMECSR_US_COUNT FIELD32(0x000000ff) -#define TIMECSR_US_64_COUNT FIELD32(0x0000ff00) -#define TIMECSR_BEACON_EXPECT FIELD32(0x00070000) - -/* - * MACCSR0: MAC configuration register 0. - */ -#define MACCSR0 0x00e0 - -/* - * MACCSR1: MAC configuration register 1. - * KICK_RX: Kick one-shot rx in one-shot rx mode. - * ONESHOT_RXMODE: Enable one-shot rx mode for debugging. - * BBPRX_RESET_MODE: Ralink bbp rx reset mode. - * AUTO_TXBBP: Auto tx logic access bbp control register. - * AUTO_RXBBP: Auto rx logic access bbp control register. - * LOOPBACK: Loopback mode. 0: normal, 1: internal, 2: external, 3:rsvd. - * INTERSIL_IF: Intersil if calibration pin. - */ -#define MACCSR1 0x00e4 -#define MACCSR1_KICK_RX FIELD32(0x00000001) -#define MACCSR1_ONESHOT_RXMODE FIELD32(0x00000002) -#define MACCSR1_BBPRX_RESET_MODE FIELD32(0x00000004) -#define MACCSR1_AUTO_TXBBP FIELD32(0x00000008) -#define MACCSR1_AUTO_RXBBP FIELD32(0x00000010) -#define MACCSR1_LOOPBACK FIELD32(0x00000060) -#define MACCSR1_INTERSIL_IF FIELD32(0x00000080) - -/* - * RALINKCSR: Ralink Rx auto-reset BBCR. - * AR_BBP_DATA#: Auto reset BBP register # data. - * AR_BBP_ID#: Auto reset BBP register # id. - */ -#define RALINKCSR 0x00e8 -#define RALINKCSR_AR_BBP_DATA0 FIELD32(0x000000ff) -#define RALINKCSR_AR_BBP_ID0 FIELD32(0x0000ff00) -#define RALINKCSR_AR_BBP_DATA1 FIELD32(0x00ff0000) -#define RALINKCSR_AR_BBP_ID1 FIELD32(0xff000000) - -/* - * BCNCSR: Beacon interval control register. - * CHANGE: Write one to change beacon interval. - * DELTATIME: The delta time value. - * NUM_BEACON: Number of beacon according to mode. - * MODE: Please refer to asic specs. - * PLUS: Plus or minus delta time value. - */ -#define BCNCSR 0x00ec -#define BCNCSR_CHANGE FIELD32(0x00000001) -#define BCNCSR_DELTATIME FIELD32(0x0000001e) -#define BCNCSR_NUM_BEACON FIELD32(0x00001fe0) -#define BCNCSR_MODE FIELD32(0x00006000) -#define BCNCSR_PLUS FIELD32(0x00008000) - -/* - * BBP / RF / IF Control Register. - */ - -/* - * BBPCSR: BBP serial control register. - * VALUE: Register value to program into BBP. - * REGNUM: Selected BBP register. - * BUSY: 1: asic is busy execute BBP programming. - * WRITE_CONTROL: 1: write BBP, 0: read BBP. - */ -#define BBPCSR 0x00f0 -#define BBPCSR_VALUE FIELD32(0x000000ff) -#define BBPCSR_REGNUM FIELD32(0x00007f00) -#define BBPCSR_BUSY FIELD32(0x00008000) -#define BBPCSR_WRITE_CONTROL FIELD32(0x00010000) - -/* - * RFCSR: RF serial control register. - * VALUE: Register value + id to program into rf/if. - * NUMBER_OF_BITS: Number of bits used in value (i:20, rfmd:22). - * IF_SELECT: Chip to program: 0: rf, 1: if. - * PLL_LD: Rf pll_ld status. - * BUSY: 1: asic is busy execute rf programming. - */ -#define RFCSR 0x00f4 -#define RFCSR_VALUE FIELD32(0x00ffffff) -#define RFCSR_NUMBER_OF_BITS FIELD32(0x1f000000) -#define RFCSR_IF_SELECT FIELD32(0x20000000) -#define RFCSR_PLL_LD FIELD32(0x40000000) -#define RFCSR_BUSY FIELD32(0x80000000) - -/* - * LEDCSR: LED control register. - * ON_PERIOD: On period, default 70ms. - * OFF_PERIOD: Off period, default 30ms. - * LINK: 0: linkoff, 1: linkup. - * ACTIVITY: 0: idle, 1: active. - */ -#define LEDCSR 0x00f8 -#define LEDCSR_ON_PERIOD FIELD32(0x000000ff) -#define LEDCSR_OFF_PERIOD FIELD32(0x0000ff00) -#define LEDCSR_LINK FIELD32(0x00010000) -#define LEDCSR_ACTIVITY FIELD32(0x00020000) - -/* - * ASIC pointer information. - * RXPTR: Current RX ring address. - * TXPTR: Current Tx ring address. - * PRIPTR: Current Priority ring address. - * ATIMPTR: Current ATIM ring address. - */ -#define RXPTR 0x0100 -#define TXPTR 0x0104 -#define PRIPTR 0x0108 -#define ATIMPTR 0x010c - -/* - * GPIO and others. - */ - -/* - * GPIOCSR: GPIO control register. - */ -#define GPIOCSR 0x0120 -#define GPIOCSR_BIT0 FIELD32(0x00000001) -#define GPIOCSR_BIT1 FIELD32(0x00000002) -#define GPIOCSR_BIT2 FIELD32(0x00000004) -#define GPIOCSR_BIT3 FIELD32(0x00000008) -#define GPIOCSR_BIT4 FIELD32(0x00000010) -#define GPIOCSR_BIT5 FIELD32(0x00000020) -#define GPIOCSR_BIT6 FIELD32(0x00000040) -#define GPIOCSR_BIT7 FIELD32(0x00000080) - -/* - * BBPPCSR: BBP Pin control register. - */ -#define BBPPCSR 0x0124 - -/* - * BCNCSR1: Tx BEACON offset time control register. - * PRELOAD: Beacon timer offset in units of usec. - */ -#define BCNCSR1 0x0130 -#define BCNCSR1_PRELOAD FIELD32(0x0000ffff) - -/* - * MACCSR2: TX_PE to RX_PE turn-around time control register - * DELAY: RX_PE low width, in units of pci clock cycle. - */ -#define MACCSR2 0x0134 -#define MACCSR2_DELAY FIELD32(0x000000ff) - -/* - * ARCSR2: 1 Mbps ACK/CTS PLCP. - */ -#define ARCSR2 0x013c -#define ARCSR2_SIGNAL FIELD32(0x000000ff) -#define ARCSR2_SERVICE FIELD32(0x0000ff00) -#define ARCSR2_LENGTH_LOW FIELD32(0x00ff0000) -#define ARCSR2_LENGTH FIELD32(0xffff0000) - -/* - * ARCSR3: 2 Mbps ACK/CTS PLCP. - */ -#define ARCSR3 0x0140 -#define ARCSR3_SIGNAL FIELD32(0x000000ff) -#define ARCSR3_SERVICE FIELD32(0x0000ff00) -#define ARCSR3_LENGTH FIELD32(0xffff0000) - -/* - * ARCSR4: 5.5 Mbps ACK/CTS PLCP. - */ -#define ARCSR4 0x0144 -#define ARCSR4_SIGNAL FIELD32(0x000000ff) -#define ARCSR4_SERVICE FIELD32(0x0000ff00) -#define ARCSR4_LENGTH FIELD32(0xffff0000) - -/* - * ARCSR5: 11 Mbps ACK/CTS PLCP. - */ -#define ARCSR5 0x0148 -#define ARCSR5_SIGNAL FIELD32(0x000000ff) -#define ARCSR5_SERVICE FIELD32(0x0000ff00) -#define ARCSR5_LENGTH FIELD32(0xffff0000) - -/* - * BBP registers. - * The wordsize of the BBP is 8 bits. - */ - -/* - * R1: TX antenna control - */ -#define BBP_R1_TX_ANTENNA FIELD8(0x03) - -/* - * R4: RX antenna control - */ -#define BBP_R4_RX_ANTENNA FIELD8(0x06) - -/* - * RF registers - */ - -/* - * RF 1 - */ -#define RF1_TUNER FIELD32(0x00020000) - -/* - * RF 3 - */ -#define RF3_TUNER FIELD32(0x00000100) -#define RF3_TXPOWER FIELD32(0x00003e00) - -/* - * EEPROM content. - * The wordsize of the EEPROM is 16 bits. - */ - -/* - * HW MAC address. - */ -#define EEPROM_MAC_ADDR_0 0x0002 -#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) -#define EEPROM_MAC_ADDR1 0x0003 -#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) -#define EEPROM_MAC_ADDR_2 0x0004 -#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) - -/* - * EEPROM antenna. - * ANTENNA_NUM: Number of antenna's. - * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * RF_TYPE: Rf_type of this adapter. - * LED_MODE: 0: default, 1: TX/RX activity,2: Single (ignore link), 3: rsvd. - * RX_AGCVGC: 0: disable, 1:enable BBP R13 tuning. - * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0. - */ -#define EEPROM_ANTENNA 0x0b -#define EEPROM_ANTENNA_NUM FIELD16(0x0003) -#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c) -#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030) -#define EEPROM_ANTENNA_RF_TYPE FIELD16(0x0040) -#define EEPROM_ANTENNA_LED_MODE FIELD16(0x0180) -#define EEPROM_ANTENNA_RX_AGCVGC_TUNING FIELD16(0x0200) -#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400) - -/* - * EEPROM BBP. - */ -#define EEPROM_BBP_START 0x0c -#define EEPROM_BBP_SIZE 7 -#define EEPROM_BBP_VALUE FIELD16(0x00ff) -#define EEPROM_BBP_REG_ID FIELD16(0xff00) - -/* - * EEPROM TXPOWER - */ -#define EEPROM_TXPOWER_START 0x13 -#define EEPROM_TXPOWER_SIZE 7 -#define EEPROM_TXPOWER_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_2 FIELD16(0xff00) - -/* - * DMA descriptor defines. - */ -#define TXD_DESC_SIZE ( 8 * sizeof(struct data_desc) ) -#define RXD_DESC_SIZE ( 8 * sizeof(struct data_desc) ) - -/* - * TX descriptor format for TX, PRIO, ATIM and Beacon Ring. - */ - -/* - * Word0 - */ -#define TXD_W0_OWNER_NIC FIELD32(0x00000001) -#define TXD_W0_VALID FIELD32(0x00000002) -#define TXD_W0_RESULT FIELD32(0x0000001c) -#define TXD_W0_RETRY_COUNT FIELD32(0x000000e0) -#define TXD_W0_MORE_FRAG FIELD32(0x00000100) -#define TXD_W0_ACK FIELD32(0x00000200) -#define TXD_W0_TIMESTAMP FIELD32(0x00000400) -#define TXD_W0_RTS FIELD32(0x00000800) -#define TXD_W0_IFS FIELD32(0x00006000) -#define TXD_W0_RETRY_MODE FIELD32(0x00008000) -#define TXD_W0_AGC FIELD32(0x00ff0000) -#define TXD_W0_R2 FIELD32(0xff000000) - -/* - * Word1 - */ -#define TXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff) - -/* - * Word2 - */ -#define TXD_W2_BUFFER_LENGTH FIELD32(0x0000ffff) -#define TXD_W2_DATABYTE_COUNT FIELD32(0xffff0000) - -/* - * Word3 & 4: PLCP information - */ -#define TXD_W3_PLCP_SIGNAL FIELD32(0x0000ffff) -#define TXD_W3_PLCP_SERVICE FIELD32(0xffff0000) -#define TXD_W4_PLCP_LENGTH_LOW FIELD32(0x0000ffff) -#define TXD_W4_PLCP_LENGTH_HIGH FIELD32(0xffff0000) - -/* - * Word5 - */ -#define TXD_W5_BBCR4 FIELD32(0x0000ffff) -#define TXD_W5_AGC_REG FIELD32(0x007f0000) -#define TXD_W5_AGC_REG_VALID FIELD32(0x00800000) -#define TXD_W5_XXX_REG FIELD32(0x7f000000) -#define TXD_W5_XXX_REG_VALID FIELD32(0x80000000) - -/* - * Word6 - */ -#define TXD_W6_SK_BUFF FIELD32(0xffffffff) - -/* - * Word7 - */ -#define TXD_W7_RESERVED FIELD32(0xffffffff) - -/* - * RX descriptor format for RX Ring. - */ - -/* - * Word0 - */ -#define RXD_W0_OWNER_NIC FIELD32(0x00000001) -#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000002) -#define RXD_W0_MULTICAST FIELD32(0x00000004) -#define RXD_W0_BROADCAST FIELD32(0x00000008) -#define RXD_W0_MY_BSS FIELD32(0x00000010) -#define RXD_W0_CRC_ERROR FIELD32(0x00000020) -#define RXD_W0_PHYSICAL_ERROR FIELD32(0x00000080) -#define RXD_W0_DATABYTE_COUNT FIELD32(0xffff0000) - -/* - * Word1 - */ -#define RXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff) - -/* - * Word2 - */ -#define RXD_W2_BUFFER_LENGTH FIELD32(0x0000ffff) -#define RXD_W2_SIGNAL FIELD32(0x00ff0000) -#define RXD_W2_RSSI FIELD32(0xff000000) - -/* - * Word3 - */ -#define RXD_W3_BBR2 FIELD32(0x000000ff) -#define RXD_W3_BBR3 FIELD32(0x0000ff00) -#define RXD_W3_BBR4 FIELD32(0x00ff0000) -#define RXD_W3_BBR5 FIELD32(0xff000000) - -/* - * Word4 - */ -#define RXD_W4_RX_END_TIME FIELD32(0xffffffff) - -/* - * Word5 & 6 & 7: Reserved - */ -#define RXD_W5_RESERVED FIELD32(0xffffffff) -#define RXD_W6_RESERVED FIELD32(0xffffffff) -#define RXD_W7_RESERVED FIELD32(0xffffffff) - -/* - * Macro's for converting txpower from EEPROM to dscape value - * and from dscape value to register value. - * NOTE: Logics in rt2400pci for txpower are reversed - * compared to the other rt2x00 drivers. A higher txpower - * value means that the txpower must be lowered. This is - * important when converting the value coming from the - * dscape stack to the rt2400 acceptable value. - */ -#define MIN_TXPOWER 31 -#define MAX_TXPOWER 62 -#define DEFAULT_TXPOWER 39 - -#define TXPOWER_FROM_DEV(__txpower) \ -({ \ - ((__txpower) > MAX_TXPOWER) ? DEFAULT_TXPOWER - MIN_TXPOWER : \ - ((__txpower) < MIN_TXPOWER) ? DEFAULT_TXPOWER - MIN_TXPOWER : \ - (((__txpower) - MAX_TXPOWER) + MIN_TXPOWER); \ -}) - -#define TXPOWER_TO_DEV(__txpower) \ -({ \ - (__txpower) += MIN_TXPOWER; \ - ((__txpower) <= MIN_TXPOWER) ? MAX_TXPOWER : \ - (((__txpower) >= MAX_TXPOWER) ? MIN_TXPOWER : \ - (MAX_TXPOWER - ((__txpower) - MIN_TXPOWER))); \ -}) - -#endif /* RT2400PCI_H */ diff --git a/package/rt2x00/src/rt2500pci.c b/package/rt2x00/src/rt2500pci.c deleted file mode 100644 index 702321c3016..00000000000 --- a/package/rt2x00/src/rt2500pci.c +++ /dev/null @@ -1,1971 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2500pci - Abstract: rt2500pci device specific routines. - Supported chipsets: RT2560. - */ - -/* - * Set enviroment defines for rt2x00.h - */ -#define DRV_NAME "rt2500pci" - -#include -#include -#include -#include -#include -#include -#include - -#include "rt2x00.h" -#include "rt2x00pci.h" -#include "rt2500pci.h" - -/* - * Register access. - * All access to the CSR registers will go through the methods - * rt2x00pci_register_read and rt2x00pci_register_write. - * BBP and RF register require indirect register access, - * and use the CSR registers BBPCSR and RFCSR to achieve this. - * These indirect registers work with busy bits, - * and we will try maximal REGISTER_BUSY_COUNT times to access - * the register while taking a REGISTER_BUSY_DELAY us delay - * between each attampt. When the busy bit is still set at that time, - * the access attempt is considered to have failed, - * and we will print an error. - */ -static u32 rt2500pci_bbp_check(const struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - unsigned int i; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, BBPCSR, ®); - if (!rt2x00_get_field32(reg, BBPCSR_BUSY)) - break; - udelay(REGISTER_BUSY_DELAY); - } - - return reg; -} - -static void rt2500pci_bbp_write(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u8 value) -{ - u32 reg; - - /* - * Wait until the BBP becomes ready. - */ - reg = rt2500pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { - ERROR(rt2x00dev, "BBPCSR register busy. Write failed.\n"); - return; - } - - /* - * Write the data into the BBP. - */ - reg = 0; - rt2x00_set_field32(®, BBPCSR_VALUE, value); - rt2x00_set_field32(®, BBPCSR_REGNUM, word); - rt2x00_set_field32(®, BBPCSR_BUSY, 1); - rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 1); - - rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); -} - -static void rt2500pci_bbp_read(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, u8 *value) -{ - u32 reg; - - /* - * Wait until the BBP becomes ready. - */ - reg = rt2500pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { - ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n"); - return; - } - - /* - * Write the request into the BBP. - */ - reg = 0; - rt2x00_set_field32(®, BBPCSR_REGNUM, word); - rt2x00_set_field32(®, BBPCSR_BUSY, 1); - rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 0); - - rt2x00pci_register_write(rt2x00dev, BBPCSR, reg); - - /* - * Wait until the BBP becomes ready. - */ - reg = rt2500pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, BBPCSR_BUSY)) { - ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n"); - *value = 0xff; - return; - } - - *value = rt2x00_get_field32(reg, BBPCSR_VALUE); -} - -static void rt2500pci_rf_write(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u32 value) -{ - u32 reg; - unsigned int i; - - if (!word) - return; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, RFCSR, ®); - if (!rt2x00_get_field32(reg, RFCSR_BUSY)) - goto rf_write; - udelay(REGISTER_BUSY_DELAY); - } - - ERROR(rt2x00dev, "RFCSR register busy. Write failed.\n"); - return; - -rf_write: - reg = 0; - rt2x00_set_field32(®, RFCSR_VALUE, value); - rt2x00_set_field32(®, RFCSR_NUMBER_OF_BITS, 20); - rt2x00_set_field32(®, RFCSR_IF_SELECT, 0); - rt2x00_set_field32(®, RFCSR_BUSY, 1); - - rt2x00pci_register_write(rt2x00dev, RFCSR, reg); - rt2x00_rf_write(rt2x00dev, word, value); -} - -static void rt2500pci_eepromregister_read(struct eeprom_93cx6 *eeprom) -{ - struct rt2x00_dev *rt2x00dev = eeprom->data; - u32 reg; - - rt2x00pci_register_read(rt2x00dev, CSR21, ®); - - eeprom->reg_data_in = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_IN); - eeprom->reg_data_out = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_OUT); - eeprom->reg_data_clock = - !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_CLOCK); - eeprom->reg_chip_select = - !!rt2x00_get_field32(reg, CSR21_EEPROM_CHIP_SELECT); -} - -static void rt2500pci_eepromregister_write(struct eeprom_93cx6 *eeprom) -{ - struct rt2x00_dev *rt2x00dev = eeprom->data; - u32 reg = 0; - - rt2x00_set_field32(®, CSR21_EEPROM_DATA_IN, !!eeprom->reg_data_in); - rt2x00_set_field32(®, CSR21_EEPROM_DATA_OUT, !!eeprom->reg_data_out); - rt2x00_set_field32(®, CSR21_EEPROM_DATA_CLOCK, - !!eeprom->reg_data_clock); - rt2x00_set_field32(®, CSR21_EEPROM_CHIP_SELECT, - !!eeprom->reg_chip_select); - - rt2x00pci_register_write(rt2x00dev, CSR21, reg); -} - -#ifdef CONFIG_RT2X00_LIB_DEBUGFS -#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) ) - -static void rt2500pci_read_csr(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 *data) -{ - rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data); -} - -static void rt2500pci_write_csr(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 data) -{ - rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data); -} - -static const struct rt2x00debug rt2500pci_rt2x00debug = { - .owner = THIS_MODULE, - .csr = { - .read = rt2500pci_read_csr, - .write = rt2500pci_write_csr, - .word_size = sizeof(u32), - .word_count = CSR_REG_SIZE / sizeof(u32), - }, - .eeprom = { - .read = rt2x00_eeprom_read, - .write = rt2x00_eeprom_write, - .word_size = sizeof(u16), - .word_count = EEPROM_SIZE / sizeof(u16), - }, - .bbp = { - .read = rt2500pci_bbp_read, - .write = rt2500pci_bbp_write, - .word_size = sizeof(u8), - .word_count = BBP_SIZE / sizeof(u8), - }, - .rf = { - .read = rt2x00_rf_read, - .write = rt2500pci_rf_write, - .word_size = sizeof(u32), - .word_count = RF_SIZE / sizeof(u32), - }, -}; -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ - -#ifdef CONFIG_RT2500PCI_RFKILL -static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®); - return rt2x00_get_field32(reg, GPIOCSR_BIT0); -} -#else -#define rt2500pci_rfkill_poll NULL -#endif /* CONFIG_RT2500PCI_RFKILL */ - -/* - * Configuration handlers. - */ -static void rt2500pci_config_mac_addr(struct rt2x00_dev *rt2x00dev, - __le32 *mac) -{ - rt2x00pci_register_multiwrite(rt2x00dev, CSR3, mac, - (2 * sizeof(__le32))); -} - -static void rt2500pci_config_bssid(struct rt2x00_dev *rt2x00dev, - __le32 *bssid) -{ - rt2x00pci_register_multiwrite(rt2x00dev, CSR5, bssid, - (2 * sizeof(__le32))); -} - -static void rt2500pci_config_type(struct rt2x00_dev *rt2x00dev, const int type, - const int tsf_sync) -{ - u32 reg; - - rt2x00pci_register_write(rt2x00dev, CSR14, 0); - - /* - * Enable beacon config - */ - rt2x00pci_register_read(rt2x00dev, BCNCSR1, ®); - rt2x00_set_field32(®, BCNCSR1_PRELOAD, - PREAMBLE + get_duration(IEEE80211_HEADER, 20)); - rt2x00_set_field32(®, BCNCSR1_BEACON_CWMIN, - rt2x00lib_get_ring(rt2x00dev, - IEEE80211_TX_QUEUE_BEACON) - ->tx_params.cw_min); - rt2x00pci_register_write(rt2x00dev, BCNCSR1, reg); - - /* - * Enable synchronisation. - */ - rt2x00pci_register_read(rt2x00dev, CSR14, ®); - rt2x00_set_field32(®, CSR14_TSF_COUNT, 1); - rt2x00_set_field32(®, CSR14_TBCN, 1); - rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); - rt2x00_set_field32(®, CSR14_TSF_SYNC, tsf_sync); - rt2x00pci_register_write(rt2x00dev, CSR14, reg); -} - -static void rt2500pci_config_preamble(struct rt2x00_dev *rt2x00dev, - const int short_preamble, - const int ack_timeout, - const int ack_consume_time) -{ - int preamble_mask; - u32 reg; - - /* - * When short preamble is enabled, we should set bit 0x08 - */ - preamble_mask = short_preamble << 3; - - rt2x00pci_register_read(rt2x00dev, TXCSR1, ®); - rt2x00_set_field32(®, TXCSR1_ACK_TIMEOUT, ack_timeout); - rt2x00_set_field32(®, TXCSR1_ACK_CONSUME_TIME, ack_consume_time); - rt2x00pci_register_write(rt2x00dev, TXCSR1, reg); - - rt2x00pci_register_read(rt2x00dev, ARCSR2, ®); - rt2x00_set_field32(®, ARCSR2_SIGNAL, 0x00 | preamble_mask); - rt2x00_set_field32(®, ARCSR2_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 10)); - rt2x00pci_register_write(rt2x00dev, ARCSR2, reg); - - rt2x00pci_register_read(rt2x00dev, ARCSR3, ®); - rt2x00_set_field32(®, ARCSR3_SIGNAL, 0x01 | preamble_mask); - rt2x00_set_field32(®, ARCSR3_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 20)); - rt2x00pci_register_write(rt2x00dev, ARCSR3, reg); - - rt2x00pci_register_read(rt2x00dev, ARCSR4, ®); - rt2x00_set_field32(®, ARCSR4_SIGNAL, 0x02 | preamble_mask); - rt2x00_set_field32(®, ARCSR4_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 55)); - rt2x00pci_register_write(rt2x00dev, ARCSR4, reg); - - rt2x00pci_register_read(rt2x00dev, ARCSR5, ®); - rt2x00_set_field32(®, ARCSR5_SIGNAL, 0x03 | preamble_mask); - rt2x00_set_field32(®, ARCSR5_SERVICE, 0x84); - rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 110)); - rt2x00pci_register_write(rt2x00dev, ARCSR5, reg); -} - -static void rt2500pci_config_phymode(struct rt2x00_dev *rt2x00dev, - const int basic_rate_mask) -{ - rt2x00pci_register_write(rt2x00dev, ARCSR1, basic_rate_mask); -} - -static void rt2500pci_config_channel(struct rt2x00_dev *rt2x00dev, - struct rf_channel *rf, const int txpower) -{ - u8 r70; - - /* - * Set TXpower. - */ - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); - - /* - * Switch on tuning bits. - * For RT2523 devices we do not need to update the R1 register. - */ - if (!rt2x00_rf(&rt2x00dev->chip, RF2523)) - rt2x00_set_field32(&rf->rf1, RF1_TUNER, 1); - rt2x00_set_field32(&rf->rf3, RF3_TUNER, 1); - - /* - * For RT2525 we should first set the channel to half band higher. - */ - if (rt2x00_rf(&rt2x00dev->chip, RF2525)) { - static const u32 vals[] = { - 0x00080cbe, 0x00080d02, 0x00080d06, 0x00080d0a, - 0x00080d0e, 0x00080d12, 0x00080d16, 0x00080d1a, - 0x00080d1e, 0x00080d22, 0x00080d26, 0x00080d2a, - 0x00080d2e, 0x00080d3a - }; - - rt2500pci_rf_write(rt2x00dev, 1, rf->rf1); - rt2500pci_rf_write(rt2x00dev, 2, vals[rf->channel - 1]); - rt2500pci_rf_write(rt2x00dev, 3, rf->rf3); - if (rf->rf4) - rt2500pci_rf_write(rt2x00dev, 4, rf->rf4); - } - - rt2500pci_rf_write(rt2x00dev, 1, rf->rf1); - rt2500pci_rf_write(rt2x00dev, 2, rf->rf2); - rt2500pci_rf_write(rt2x00dev, 3, rf->rf3); - if (rf->rf4) - rt2500pci_rf_write(rt2x00dev, 4, rf->rf4); - - /* - * Channel 14 requires the Japan filter bit to be set. - */ - r70 = 0x46; - rt2x00_set_field8(&r70, BBP_R70_JAPAN_FILTER, rf->channel == 14); - rt2500pci_bbp_write(rt2x00dev, 70, r70); - - msleep(1); - - /* - * Switch off tuning bits. - * For RT2523 devices we do not need to update the R1 register. - */ - if (!rt2x00_rf(&rt2x00dev->chip, RF2523)) { - rt2x00_set_field32(&rf->rf1, RF1_TUNER, 0); - rt2500pci_rf_write(rt2x00dev, 1, rf->rf1); - } - - rt2x00_set_field32(&rf->rf3, RF3_TUNER, 0); - rt2500pci_rf_write(rt2x00dev, 3, rf->rf3); - - /* - * Clear false CRC during channel switch. - */ - rt2x00pci_register_read(rt2x00dev, CNT0, &rf->rf1); -} - -static void rt2500pci_config_txpower(struct rt2x00_dev *rt2x00dev, - const int txpower) -{ - u32 rf3; - - rt2x00_rf_read(rt2x00dev, 3, &rf3); - rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); - rt2500pci_rf_write(rt2x00dev, 3, rf3); -} - -static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev, - const int antenna_tx, const int antenna_rx) -{ - u32 reg; - u8 r14; - u8 r2; - - rt2x00pci_register_read(rt2x00dev, BBPCSR1, ®); - rt2500pci_bbp_read(rt2x00dev, 14, &r14); - rt2500pci_bbp_read(rt2x00dev, 2, &r2); - - /* - * Configure the TX antenna. - */ - switch (antenna_tx) { - case ANTENNA_SW_DIVERSITY: - case ANTENNA_HW_DIVERSITY: - rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2); - rt2x00_set_field32(®, BBPCSR1_CCK, 2); - rt2x00_set_field32(®, BBPCSR1_OFDM, 2); - break; - case ANTENNA_A: - rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0); - rt2x00_set_field32(®, BBPCSR1_CCK, 0); - rt2x00_set_field32(®, BBPCSR1_OFDM, 0); - break; - case ANTENNA_B: - rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2); - rt2x00_set_field32(®, BBPCSR1_CCK, 2); - rt2x00_set_field32(®, BBPCSR1_OFDM, 2); - break; - } - - /* - * Configure the RX antenna. - */ - switch (antenna_rx) { - case ANTENNA_SW_DIVERSITY: - case ANTENNA_HW_DIVERSITY: - rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2); - break; - case ANTENNA_A: - rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0); - break; - case ANTENNA_B: - rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2); - break; - } - - /* - * RT2525E and RT5222 need to flip TX I/Q - */ - if (rt2x00_rf(&rt2x00dev->chip, RF2525E) || - rt2x00_rf(&rt2x00dev->chip, RF5222)) { - rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1); - rt2x00_set_field32(®, BBPCSR1_CCK_FLIP, 1); - rt2x00_set_field32(®, BBPCSR1_OFDM_FLIP, 1); - - /* - * RT2525E does not need RX I/Q Flip. - */ - if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) - rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0); - } else { - rt2x00_set_field32(®, BBPCSR1_CCK_FLIP, 0); - rt2x00_set_field32(®, BBPCSR1_OFDM_FLIP, 0); - } - - rt2x00pci_register_write(rt2x00dev, BBPCSR1, reg); - rt2500pci_bbp_write(rt2x00dev, 14, r14); - rt2500pci_bbp_write(rt2x00dev, 2, r2); -} - -static void rt2500pci_config_duration(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, CSR11, ®); - rt2x00_set_field32(®, CSR11_SLOT_TIME, libconf->slot_time); - rt2x00pci_register_write(rt2x00dev, CSR11, reg); - - rt2x00pci_register_read(rt2x00dev, CSR18, ®); - rt2x00_set_field32(®, CSR18_SIFS, libconf->sifs); - rt2x00_set_field32(®, CSR18_PIFS, libconf->pifs); - rt2x00pci_register_write(rt2x00dev, CSR18, reg); - - rt2x00pci_register_read(rt2x00dev, CSR19, ®); - rt2x00_set_field32(®, CSR19_DIFS, libconf->difs); - rt2x00_set_field32(®, CSR19_EIFS, libconf->eifs); - rt2x00pci_register_write(rt2x00dev, CSR19, reg); - - rt2x00pci_register_read(rt2x00dev, TXCSR1, ®); - rt2x00_set_field32(®, TXCSR1_TSF_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(®, TXCSR1_AUTORESPONDER, 1); - rt2x00pci_register_write(rt2x00dev, TXCSR1, reg); - - rt2x00pci_register_read(rt2x00dev, CSR12, ®); - rt2x00_set_field32(®, CSR12_BEACON_INTERVAL, - libconf->conf->beacon_int * 16); - rt2x00_set_field32(®, CSR12_CFP_MAX_DURATION, - libconf->conf->beacon_int * 16); - rt2x00pci_register_write(rt2x00dev, CSR12, reg); -} - -static void rt2500pci_config(struct rt2x00_dev *rt2x00dev, - const unsigned int flags, - struct rt2x00lib_conf *libconf) -{ - if (flags & CONFIG_UPDATE_PHYMODE) - rt2500pci_config_phymode(rt2x00dev, libconf->basic_rates); - if (flags & CONFIG_UPDATE_CHANNEL) - rt2500pci_config_channel(rt2x00dev, &libconf->rf, - libconf->conf->power_level); - if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL)) - rt2500pci_config_txpower(rt2x00dev, - libconf->conf->power_level); - if (flags & CONFIG_UPDATE_ANTENNA) - rt2500pci_config_antenna(rt2x00dev, - libconf->conf->antenna_sel_tx, - libconf->conf->antenna_sel_rx); - if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT)) - rt2500pci_config_duration(rt2x00dev, libconf); -} - -/* - * LED functions. - */ -static void rt2500pci_enable_led(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, LEDCSR, ®); - - rt2x00_set_field32(®, LEDCSR_ON_PERIOD, 70); - rt2x00_set_field32(®, LEDCSR_OFF_PERIOD, 30); - - if (rt2x00dev->led_mode == LED_MODE_TXRX_ACTIVITY) { - rt2x00_set_field32(®, LEDCSR_LINK, 1); - rt2x00_set_field32(®, LEDCSR_ACTIVITY, 0); - } else if (rt2x00dev->led_mode == LED_MODE_ASUS) { - rt2x00_set_field32(®, LEDCSR_LINK, 0); - rt2x00_set_field32(®, LEDCSR_ACTIVITY, 1); - } else { - rt2x00_set_field32(®, LEDCSR_LINK, 1); - rt2x00_set_field32(®, LEDCSR_ACTIVITY, 1); - } - - rt2x00pci_register_write(rt2x00dev, LEDCSR, reg); -} - -static void rt2500pci_disable_led(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, LEDCSR, ®); - rt2x00_set_field32(®, LEDCSR_LINK, 0); - rt2x00_set_field32(®, LEDCSR_ACTIVITY, 0); - rt2x00pci_register_write(rt2x00dev, LEDCSR, reg); -} - -/* - * Link tuning - */ -static void rt2500pci_link_stats(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - /* - * Update FCS error count from register. - */ - rt2x00pci_register_read(rt2x00dev, CNT0, ®); - rt2x00dev->link.rx_failed = rt2x00_get_field32(reg, CNT0_FCS_ERROR); - - /* - * Update False CCA count from register. - */ - rt2x00pci_register_read(rt2x00dev, CNT3, ®); - rt2x00dev->link.false_cca = rt2x00_get_field32(reg, CNT3_FALSE_CCA); -} - -static void rt2500pci_reset_tuner(struct rt2x00_dev *rt2x00dev) -{ - rt2500pci_bbp_write(rt2x00dev, 17, 0x48); - rt2x00dev->link.vgc_level = 0x48; -} - -static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev) -{ - int rssi = rt2x00_get_link_rssi(&rt2x00dev->link); - u8 r17; - - /* - * To prevent collisions with MAC ASIC on chipsets - * up to version C the link tuning should halt after 20 - * seconds. - */ - if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D && - rt2x00dev->link.count > 20) - return; - - rt2500pci_bbp_read(rt2x00dev, 17, &r17); - - /* - * Chipset versions C and lower should directly continue - * to the dynamic CCA tuning. - */ - if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D) - goto dynamic_cca_tune; - - /* - * A too low RSSI will cause too much false CCA which will - * then corrupt the R17 tuning. To remidy this the tuning should - * be stopped (While making sure the R17 value will not exceed limits) - */ - if (rssi < -80 && rt2x00dev->link.count > 20) { - if (r17 >= 0x41) { - r17 = rt2x00dev->link.vgc_level; - rt2500pci_bbp_write(rt2x00dev, 17, r17); - } - return; - } - - /* - * Special big-R17 for short distance - */ - if (rssi >= -58) { - if (r17 != 0x50) - rt2500pci_bbp_write(rt2x00dev, 17, 0x50); - return; - } - - /* - * Special mid-R17 for middle distance - */ - if (rssi >= -74) { - if (r17 != 0x41) - rt2500pci_bbp_write(rt2x00dev, 17, 0x41); - return; - } - - /* - * Leave short or middle distance condition, restore r17 - * to the dynamic tuning range. - */ - if (r17 >= 0x41) { - rt2500pci_bbp_write(rt2x00dev, 17, rt2x00dev->link.vgc_level); - return; - } - -dynamic_cca_tune: - - /* - * R17 is inside the dynamic tuning range, - * start tuning the link based on the false cca counter. - */ - if (rt2x00dev->link.false_cca > 512 && r17 < 0x40) { - rt2500pci_bbp_write(rt2x00dev, 17, ++r17); - rt2x00dev->link.vgc_level = r17; - } else if (rt2x00dev->link.false_cca < 100 && r17 > 0x32) { - rt2500pci_bbp_write(rt2x00dev, 17, --r17); - rt2x00dev->link.vgc_level = r17; - } -} - -/* - * Initialization functions. - */ -static void rt2500pci_init_rxring(struct rt2x00_dev *rt2x00dev) -{ - struct data_ring *ring = rt2x00dev->rx; - struct data_desc *rxd; - unsigned int i; - u32 word; - - memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring)); - - for (i = 0; i < ring->stats.limit; i++) { - rxd = ring->entry[i].priv; - - rt2x00_desc_read(rxd, 1, &word); - rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, - ring->entry[i].data_dma); - rt2x00_desc_write(rxd, 1, word); - - rt2x00_desc_read(rxd, 0, &word); - rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); - rt2x00_desc_write(rxd, 0, word); - } - - rt2x00_ring_index_clear(rt2x00dev->rx); -} - -static void rt2500pci_init_txring(struct rt2x00_dev *rt2x00dev, const int queue) -{ - struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue); - struct data_desc *txd; - unsigned int i; - u32 word; - - memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring)); - - for (i = 0; i < ring->stats.limit; i++) { - txd = ring->entry[i].priv; - - rt2x00_desc_read(txd, 1, &word); - rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, - ring->entry[i].data_dma); - rt2x00_desc_write(txd, 1, word); - - rt2x00_desc_read(txd, 0, &word); - rt2x00_set_field32(&word, TXD_W0_VALID, 0); - rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); - rt2x00_desc_write(txd, 0, word); - } - - rt2x00_ring_index_clear(ring); -} - -static int rt2500pci_init_rings(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - /* - * Initialize rings. - */ - rt2500pci_init_rxring(rt2x00dev); - rt2500pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA0); - rt2500pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA1); - rt2500pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON); - rt2500pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); - - /* - * Initialize registers. - */ - rt2x00pci_register_read(rt2x00dev, TXCSR2, ®); - rt2x00_set_field32(®, TXCSR2_TXD_SIZE, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].desc_size); - rt2x00_set_field32(®, TXCSR2_NUM_TXD, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].stats.limit); - rt2x00_set_field32(®, TXCSR2_NUM_ATIM, - rt2x00dev->bcn[1].stats.limit); - rt2x00_set_field32(®, TXCSR2_NUM_PRIO, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].stats.limit); - rt2x00pci_register_write(rt2x00dev, TXCSR2, reg); - - rt2x00pci_register_read(rt2x00dev, TXCSR3, ®); - rt2x00_set_field32(®, TXCSR3_TX_RING_REGISTER, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].data_dma); - rt2x00pci_register_write(rt2x00dev, TXCSR3, reg); - - rt2x00pci_register_read(rt2x00dev, TXCSR5, ®); - rt2x00_set_field32(®, TXCSR5_PRIO_RING_REGISTER, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].data_dma); - rt2x00pci_register_write(rt2x00dev, TXCSR5, reg); - - rt2x00pci_register_read(rt2x00dev, TXCSR4, ®); - rt2x00_set_field32(®, TXCSR4_ATIM_RING_REGISTER, - rt2x00dev->bcn[1].data_dma); - rt2x00pci_register_write(rt2x00dev, TXCSR4, reg); - - rt2x00pci_register_read(rt2x00dev, TXCSR6, ®); - rt2x00_set_field32(®, TXCSR6_BEACON_RING_REGISTER, - rt2x00dev->bcn[0].data_dma); - rt2x00pci_register_write(rt2x00dev, TXCSR6, reg); - - rt2x00pci_register_read(rt2x00dev, RXCSR1, ®); - rt2x00_set_field32(®, RXCSR1_RXD_SIZE, rt2x00dev->rx->desc_size); - rt2x00_set_field32(®, RXCSR1_NUM_RXD, rt2x00dev->rx->stats.limit); - rt2x00pci_register_write(rt2x00dev, RXCSR1, reg); - - rt2x00pci_register_read(rt2x00dev, RXCSR2, ®); - rt2x00_set_field32(®, RXCSR2_RX_RING_REGISTER, - rt2x00dev->rx->data_dma); - rt2x00pci_register_write(rt2x00dev, RXCSR2, reg); - - return 0; -} - -static int rt2500pci_init_registers(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00pci_register_write(rt2x00dev, PSCSR0, 0x00020002); - rt2x00pci_register_write(rt2x00dev, PSCSR1, 0x00000002); - rt2x00pci_register_write(rt2x00dev, PSCSR2, 0x00020002); - rt2x00pci_register_write(rt2x00dev, PSCSR3, 0x00000002); - - rt2x00pci_register_read(rt2x00dev, TIMECSR, ®); - rt2x00_set_field32(®, TIMECSR_US_COUNT, 33); - rt2x00_set_field32(®, TIMECSR_US_64_COUNT, 63); - rt2x00_set_field32(®, TIMECSR_BEACON_EXPECT, 0); - rt2x00pci_register_write(rt2x00dev, TIMECSR, reg); - - rt2x00pci_register_read(rt2x00dev, CSR9, ®); - rt2x00_set_field32(®, CSR9_MAX_FRAME_UNIT, - rt2x00dev->rx->data_size / 128); - rt2x00pci_register_write(rt2x00dev, CSR9, reg); - - /* - * Always use CWmin and CWmax set in descriptor. - */ - rt2x00pci_register_read(rt2x00dev, CSR11, ®); - rt2x00_set_field32(®, CSR11_CW_SELECT, 0); - rt2x00pci_register_write(rt2x00dev, CSR11, reg); - - rt2x00pci_register_write(rt2x00dev, CNT3, 0); - - rt2x00pci_register_read(rt2x00dev, TXCSR8, ®); - rt2x00_set_field32(®, TXCSR8_BBP_ID0, 10); - rt2x00_set_field32(®, TXCSR8_BBP_ID0_VALID, 1); - rt2x00_set_field32(®, TXCSR8_BBP_ID1, 11); - rt2x00_set_field32(®, TXCSR8_BBP_ID1_VALID, 1); - rt2x00_set_field32(®, TXCSR8_BBP_ID2, 13); - rt2x00_set_field32(®, TXCSR8_BBP_ID2_VALID, 1); - rt2x00_set_field32(®, TXCSR8_BBP_ID3, 12); - rt2x00_set_field32(®, TXCSR8_BBP_ID3_VALID, 1); - rt2x00pci_register_write(rt2x00dev, TXCSR8, reg); - - rt2x00pci_register_read(rt2x00dev, ARTCSR0, ®); - rt2x00_set_field32(®, ARTCSR0_ACK_CTS_1MBS, 112); - rt2x00_set_field32(®, ARTCSR0_ACK_CTS_2MBS, 56); - rt2x00_set_field32(®, ARTCSR0_ACK_CTS_5_5MBS, 20); - rt2x00_set_field32(®, ARTCSR0_ACK_CTS_11MBS, 10); - rt2x00pci_register_write(rt2x00dev, ARTCSR0, reg); - - rt2x00pci_register_read(rt2x00dev, ARTCSR1, ®); - rt2x00_set_field32(®, ARTCSR1_ACK_CTS_6MBS, 45); - rt2x00_set_field32(®, ARTCSR1_ACK_CTS_9MBS, 37); - rt2x00_set_field32(®, ARTCSR1_ACK_CTS_12MBS, 33); - rt2x00_set_field32(®, ARTCSR1_ACK_CTS_18MBS, 29); - rt2x00pci_register_write(rt2x00dev, ARTCSR1, reg); - - rt2x00pci_register_read(rt2x00dev, ARTCSR2, ®); - rt2x00_set_field32(®, ARTCSR2_ACK_CTS_24MBS, 29); - rt2x00_set_field32(®, ARTCSR2_ACK_CTS_36MBS, 25); - rt2x00_set_field32(®, ARTCSR2_ACK_CTS_48MBS, 25); - rt2x00_set_field32(®, ARTCSR2_ACK_CTS_54MBS, 25); - rt2x00pci_register_write(rt2x00dev, ARTCSR2, reg); - - rt2x00pci_register_read(rt2x00dev, RXCSR3, ®); - rt2x00_set_field32(®, RXCSR3_BBP_ID0, 47); /* CCK Signal */ - rt2x00_set_field32(®, RXCSR3_BBP_ID0_VALID, 1); - rt2x00_set_field32(®, RXCSR3_BBP_ID1, 51); /* Rssi */ - rt2x00_set_field32(®, RXCSR3_BBP_ID1_VALID, 1); - rt2x00_set_field32(®, RXCSR3_BBP_ID2, 42); /* OFDM Rate */ - rt2x00_set_field32(®, RXCSR3_BBP_ID2_VALID, 1); - rt2x00_set_field32(®, RXCSR3_BBP_ID3, 51); /* RSSI */ - rt2x00_set_field32(®, RXCSR3_BBP_ID3_VALID, 1); - rt2x00pci_register_write(rt2x00dev, RXCSR3, reg); - - rt2x00pci_register_read(rt2x00dev, PCICSR, ®); - rt2x00_set_field32(®, PCICSR_BIG_ENDIAN, 0); - rt2x00_set_field32(®, PCICSR_RX_TRESHOLD, 0); - rt2x00_set_field32(®, PCICSR_TX_TRESHOLD, 3); - rt2x00_set_field32(®, PCICSR_BURST_LENTH, 1); - rt2x00_set_field32(®, PCICSR_ENABLE_CLK, 1); - rt2x00_set_field32(®, PCICSR_READ_MULTIPLE, 1); - rt2x00_set_field32(®, PCICSR_WRITE_INVALID, 1); - rt2x00pci_register_write(rt2x00dev, PCICSR, reg); - - rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0x3f3b3100); - - rt2x00pci_register_write(rt2x00dev, GPIOCSR, 0x0000ff00); - rt2x00pci_register_write(rt2x00dev, TESTCSR, 0x000000f0); - - if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) - return -EBUSY; - - rt2x00pci_register_write(rt2x00dev, MACCSR0, 0x00213223); - rt2x00pci_register_write(rt2x00dev, MACCSR1, 0x00235518); - - rt2x00pci_register_read(rt2x00dev, MACCSR2, ®); - rt2x00_set_field32(®, MACCSR2_DELAY, 64); - rt2x00pci_register_write(rt2x00dev, MACCSR2, reg); - - rt2x00pci_register_read(rt2x00dev, RALINKCSR, ®); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_DATA0, 17); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_ID0, 26); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_VALID0, 1); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_DATA1, 0); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_ID1, 26); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_VALID1, 1); - rt2x00pci_register_write(rt2x00dev, RALINKCSR, reg); - - rt2x00pci_register_write(rt2x00dev, BBPCSR1, 0x82188200); - - rt2x00pci_register_write(rt2x00dev, TXACKCSR0, 0x00000020); - - rt2x00pci_register_read(rt2x00dev, CSR1, ®); - rt2x00_set_field32(®, CSR1_SOFT_RESET, 1); - rt2x00_set_field32(®, CSR1_BBP_RESET, 0); - rt2x00_set_field32(®, CSR1_HOST_READY, 0); - rt2x00pci_register_write(rt2x00dev, CSR1, reg); - - rt2x00pci_register_read(rt2x00dev, CSR1, ®); - rt2x00_set_field32(®, CSR1_SOFT_RESET, 0); - rt2x00_set_field32(®, CSR1_HOST_READY, 1); - rt2x00pci_register_write(rt2x00dev, CSR1, reg); - - /* - * We must clear the FCS and FIFO error count. - * These registers are cleared on read, - * so we may pass a useless variable to store the value. - */ - rt2x00pci_register_read(rt2x00dev, CNT0, ®); - rt2x00pci_register_read(rt2x00dev, CNT4, ®); - - return 0; -} - -static int rt2500pci_init_bbp(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u16 eeprom; - u8 reg_id; - u8 value; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2500pci_bbp_read(rt2x00dev, 0, &value); - if ((value != 0xff) && (value != 0x00)) - goto continue_csr_init; - NOTICE(rt2x00dev, "Waiting for BBP register.\n"); - udelay(REGISTER_BUSY_DELAY); - } - - ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); - return -EACCES; - -continue_csr_init: - rt2500pci_bbp_write(rt2x00dev, 3, 0x02); - rt2500pci_bbp_write(rt2x00dev, 4, 0x19); - rt2500pci_bbp_write(rt2x00dev, 14, 0x1c); - rt2500pci_bbp_write(rt2x00dev, 15, 0x30); - rt2500pci_bbp_write(rt2x00dev, 16, 0xac); - rt2500pci_bbp_write(rt2x00dev, 18, 0x18); - rt2500pci_bbp_write(rt2x00dev, 19, 0xff); - rt2500pci_bbp_write(rt2x00dev, 20, 0x1e); - rt2500pci_bbp_write(rt2x00dev, 21, 0x08); - rt2500pci_bbp_write(rt2x00dev, 22, 0x08); - rt2500pci_bbp_write(rt2x00dev, 23, 0x08); - rt2500pci_bbp_write(rt2x00dev, 24, 0x70); - rt2500pci_bbp_write(rt2x00dev, 25, 0x40); - rt2500pci_bbp_write(rt2x00dev, 26, 0x08); - rt2500pci_bbp_write(rt2x00dev, 27, 0x23); - rt2500pci_bbp_write(rt2x00dev, 30, 0x10); - rt2500pci_bbp_write(rt2x00dev, 31, 0x2b); - rt2500pci_bbp_write(rt2x00dev, 32, 0xb9); - rt2500pci_bbp_write(rt2x00dev, 34, 0x12); - rt2500pci_bbp_write(rt2x00dev, 35, 0x50); - rt2500pci_bbp_write(rt2x00dev, 39, 0xc4); - rt2500pci_bbp_write(rt2x00dev, 40, 0x02); - rt2500pci_bbp_write(rt2x00dev, 41, 0x60); - rt2500pci_bbp_write(rt2x00dev, 53, 0x10); - rt2500pci_bbp_write(rt2x00dev, 54, 0x18); - rt2500pci_bbp_write(rt2x00dev, 56, 0x08); - rt2500pci_bbp_write(rt2x00dev, 57, 0x10); - rt2500pci_bbp_write(rt2x00dev, 58, 0x08); - rt2500pci_bbp_write(rt2x00dev, 61, 0x6d); - rt2500pci_bbp_write(rt2x00dev, 62, 0x10); - - DEBUG(rt2x00dev, "Start initialization from EEPROM...\n"); - for (i = 0; i < EEPROM_BBP_SIZE; i++) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); - - if (eeprom != 0xffff && eeprom != 0x0000) { - reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); - value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); - DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n", - reg_id, value); - rt2500pci_bbp_write(rt2x00dev, reg_id, value); - } - } - DEBUG(rt2x00dev, "...End initialization from EEPROM.\n"); - - return 0; -} - -/* - * Device state switch handlers. - */ -static void rt2500pci_toggle_rx(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, RXCSR0, ®); - rt2x00_set_field32(®, RXCSR0_DISABLE_RX, - state == STATE_RADIO_RX_OFF); - rt2x00pci_register_write(rt2x00dev, RXCSR0, reg); -} - -static void rt2500pci_toggle_irq(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - int mask = (state == STATE_RADIO_IRQ_OFF); - u32 reg; - - /* - * When interrupts are being enabled, the interrupt registers - * should clear the register to assure a clean state. - */ - if (state == STATE_RADIO_IRQ_ON) { - rt2x00pci_register_read(rt2x00dev, CSR7, ®); - rt2x00pci_register_write(rt2x00dev, CSR7, reg); - } - - /* - * Only toggle the interrupts bits we are going to use. - * Non-checked interrupt bits are disabled by default. - */ - rt2x00pci_register_read(rt2x00dev, CSR8, ®); - rt2x00_set_field32(®, CSR8_TBCN_EXPIRE, mask); - rt2x00_set_field32(®, CSR8_TXDONE_TXRING, mask); - rt2x00_set_field32(®, CSR8_TXDONE_ATIMRING, mask); - rt2x00_set_field32(®, CSR8_TXDONE_PRIORING, mask); - rt2x00_set_field32(®, CSR8_RXDONE, mask); - rt2x00pci_register_write(rt2x00dev, CSR8, reg); -} - -static int rt2500pci_enable_radio(struct rt2x00_dev *rt2x00dev) -{ - /* - * Initialize all registers. - */ - if (rt2500pci_init_rings(rt2x00dev) || - rt2500pci_init_registers(rt2x00dev) || - rt2500pci_init_bbp(rt2x00dev)) { - ERROR(rt2x00dev, "Register initialization failed.\n"); - return -EIO; - } - - /* - * Enable interrupts. - */ - rt2500pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON); - - /* - * Enable LED - */ - rt2500pci_enable_led(rt2x00dev); - - return 0; -} - -static void rt2500pci_disable_radio(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - /* - * Disable LED - */ - rt2500pci_disable_led(rt2x00dev); - - rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0); - - /* - * Disable synchronisation. - */ - rt2x00pci_register_write(rt2x00dev, CSR14, 0); - - /* - * Cancel RX and TX. - */ - rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); - rt2x00_set_field32(®, TXCSR0_ABORT, 1); - rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); - - /* - * Disable interrupts. - */ - rt2500pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF); -} - -static int rt2500pci_set_state(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - u32 reg; - unsigned int i; - char put_to_sleep; - char bbp_state; - char rf_state; - - put_to_sleep = (state != STATE_AWAKE); - - rt2x00pci_register_read(rt2x00dev, PWRCSR1, ®); - rt2x00_set_field32(®, PWRCSR1_SET_STATE, 1); - rt2x00_set_field32(®, PWRCSR1_BBP_DESIRE_STATE, state); - rt2x00_set_field32(®, PWRCSR1_RF_DESIRE_STATE, state); - rt2x00_set_field32(®, PWRCSR1_PUT_TO_SLEEP, put_to_sleep); - rt2x00pci_register_write(rt2x00dev, PWRCSR1, reg); - - /* - * Device is not guaranteed to be in the requested state yet. - * We must wait until the register indicates that the - * device has entered the correct state. - */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, PWRCSR1, ®); - bbp_state = rt2x00_get_field32(reg, PWRCSR1_BBP_CURR_STATE); - rf_state = rt2x00_get_field32(reg, PWRCSR1_RF_CURR_STATE); - if (bbp_state == state && rf_state == state) - return 0; - msleep(10); - } - - NOTICE(rt2x00dev, "Device failed to enter state %d, " - "current device state: bbp %d and rf %d.\n", - state, bbp_state, rf_state); - - return -EBUSY; -} - -static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - int retval = 0; - - switch (state) { - case STATE_RADIO_ON: - retval = rt2500pci_enable_radio(rt2x00dev); - break; - case STATE_RADIO_OFF: - rt2500pci_disable_radio(rt2x00dev); - break; - case STATE_RADIO_RX_ON: - case STATE_RADIO_RX_OFF: - rt2500pci_toggle_rx(rt2x00dev, state); - break; - case STATE_DEEP_SLEEP: - case STATE_SLEEP: - case STATE_STANDBY: - case STATE_AWAKE: - retval = rt2500pci_set_state(rt2x00dev, state); - break; - default: - retval = -ENOTSUPP; - break; - } - - return retval; -} - -/* - * TX descriptor initialization - */ -static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct data_desc *txd, - struct txdata_entry_desc *desc, - struct ieee80211_hdr *ieee80211hdr, - unsigned int length, - struct ieee80211_tx_control *control) -{ - u32 word; - - /* - * Start writing the descriptor words. - */ - rt2x00_desc_read(txd, 2, &word); - rt2x00_set_field32(&word, TXD_W2_IV_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(&word, TXD_W2_AIFS, desc->aifs); - rt2x00_set_field32(&word, TXD_W2_CWMIN, desc->cw_min); - rt2x00_set_field32(&word, TXD_W2_CWMAX, desc->cw_max); - rt2x00_desc_write(txd, 2, word); - - rt2x00_desc_read(txd, 3, &word); - rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, desc->signal); - rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, desc->service); - rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW, desc->length_low); - rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH, desc->length_high); - rt2x00_desc_write(txd, 3, word); - - rt2x00_desc_read(txd, 10, &word); - rt2x00_set_field32(&word, TXD_W10_RTS, - test_bit(ENTRY_TXD_RTS_FRAME, &desc->flags)); - rt2x00_desc_write(txd, 10, word); - - rt2x00_desc_read(txd, 0, &word); - rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1); - rt2x00_set_field32(&word, TXD_W0_VALID, 1); - rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, - test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags)); - rt2x00_set_field32(&word, TXD_W0_ACK, - !(control->flags & IEEE80211_TXCTL_NO_ACK)); - rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, - test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags)); - rt2x00_set_field32(&word, TXD_W0_OFDM, - test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags)); - rt2x00_set_field32(&word, TXD_W0_CIPHER_OWNER, 1); - rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs); - rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, - !!(control->flags & - IEEE80211_TXCTL_LONG_RETRY_LIMIT)); - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, length); - rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); - rt2x00_desc_write(txd, 0, word); -} - -/* - * TX data initialization - */ -static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - unsigned int queue) -{ - u32 reg; - - if (queue == IEEE80211_TX_QUEUE_BEACON) { - rt2x00pci_register_read(rt2x00dev, CSR14, ®); - if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) { - rt2x00_set_field32(®, CSR14_BEACON_GEN, 1); - rt2x00pci_register_write(rt2x00dev, CSR14, reg); - } - return; - } - - rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); - if (queue == IEEE80211_TX_QUEUE_DATA0) - rt2x00_set_field32(®, TXCSR0_KICK_PRIO, 1); - else if (queue == IEEE80211_TX_QUEUE_DATA1) - rt2x00_set_field32(®, TXCSR0_KICK_TX, 1); - else if (queue == IEEE80211_TX_QUEUE_AFTER_BEACON) - rt2x00_set_field32(®, TXCSR0_KICK_ATIM, 1); - rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); -} - -/* - * RX control handlers - */ -static void rt2500pci_fill_rxdone(struct data_entry *entry, - struct rxdata_entry_desc *desc) -{ - struct data_desc *rxd = entry->priv; - u32 word0; - u32 word2; - - rt2x00_desc_read(rxd, 0, &word0); - rt2x00_desc_read(rxd, 2, &word2); - - desc->flags = 0; - if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) - desc->flags |= RX_FLAG_FAILED_FCS_CRC; - if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR)) - desc->flags |= RX_FLAG_FAILED_PLCP_CRC; - - desc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL); - desc->rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) - - entry->ring->rt2x00dev->rssi_offset; - desc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); - desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); -} - -/* - * Interrupt functions. - */ -static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev, const int queue) -{ - struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue); - struct data_entry *entry; - struct data_desc *txd; - u32 word; - int tx_status; - int retry; - - while (!rt2x00_ring_empty(ring)) { - entry = rt2x00_get_data_entry_done(ring); - txd = entry->priv; - rt2x00_desc_read(txd, 0, &word); - - if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || - !rt2x00_get_field32(word, TXD_W0_VALID)) - break; - - /* - * Obtain the status about this packet. - */ - tx_status = rt2x00_get_field32(word, TXD_W0_RESULT); - retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT); - - rt2x00lib_txdone(entry, tx_status, retry); - - /* - * Make this entry available for reuse. - */ - entry->flags = 0; - rt2x00_set_field32(&word, TXD_W0_VALID, 0); - rt2x00_desc_write(txd, 0, word); - rt2x00_ring_index_done_inc(ring); - } - - /* - * If the data ring was full before the txdone handler - * we must make sure the packet queue in the mac80211 stack - * is reenabled when the txdone handler has finished. - */ - entry = ring->entry; - if (!rt2x00_ring_full(ring)) - ieee80211_wake_queue(rt2x00dev->hw, - entry->tx_status.control.queue); -} - -static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance) -{ - struct rt2x00_dev *rt2x00dev = dev_instance; - u32 reg; - - /* - * Get the interrupt sources & saved to local variable. - * Write register value back to clear pending interrupts. - */ - rt2x00pci_register_read(rt2x00dev, CSR7, ®); - rt2x00pci_register_write(rt2x00dev, CSR7, reg); - - if (!reg) - return IRQ_NONE; - - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) - return IRQ_HANDLED; - - /* - * Handle interrupts, walk through all bits - * and run the tasks, the bits are checked in order of - * priority. - */ - - /* - * 1 - Beacon timer expired interrupt. - */ - if (rt2x00_get_field32(reg, CSR7_TBCN_EXPIRE)) - rt2x00lib_beacondone(rt2x00dev); - - /* - * 2 - Rx ring done interrupt. - */ - if (rt2x00_get_field32(reg, CSR7_RXDONE)) - rt2x00pci_rxdone(rt2x00dev); - - /* - * 3 - Atim ring transmit done interrupt. - */ - if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING)) - rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_AFTER_BEACON); - - /* - * 4 - Priority ring transmit done interrupt. - */ - if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING)) - rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA0); - - /* - * 5 - Tx ring transmit done interrupt. - */ - if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING)) - rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA1); - - return IRQ_HANDLED; -} - -/* - * Device probe functions. - */ -static int rt2500pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) -{ - struct eeprom_93cx6 eeprom; - u32 reg; - u16 word; - u8 *mac; - - rt2x00pci_register_read(rt2x00dev, CSR21, ®); - - eeprom.data = rt2x00dev; - eeprom.register_read = rt2500pci_eepromregister_read; - eeprom.register_write = rt2500pci_eepromregister_write; - eeprom.width = rt2x00_get_field32(reg, CSR21_TYPE_93C46) ? - PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66; - eeprom.reg_data_in = 0; - eeprom.reg_data_out = 0; - eeprom.reg_data_clock = 0; - eeprom.reg_chip_select = 0; - - eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, - EEPROM_SIZE / sizeof(u16)); - - /* - * Start validation of the data that has been read. - */ - mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); - if (!is_valid_ether_addr(mac)) { - DECLARE_MAC_BUF(macbuf); - - random_ether_addr(mac); - EEPROM(rt2x00dev, "MAC: %s\n", - print_mac(macbuf, mac)); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2); - rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522); - rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); - EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); - rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); - EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI, - DEFAULT_RSSI_OFFSET); - rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word); - EEPROM(rt2x00dev, "Calibrate offset: 0x%04x\n", word); - } - - return 0; -} - -static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - u16 value; - u16 eeprom; - - /* - * Read EEPROM word for configuration. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); - - /* - * Identify RF chipset. - */ - value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); - rt2x00pci_register_read(rt2x00dev, CSR0, ®); - rt2x00_set_chip(rt2x00dev, RT2560, value, reg); - - if (!rt2x00_rf(&rt2x00dev->chip, RF2522) && - !rt2x00_rf(&rt2x00dev->chip, RF2523) && - !rt2x00_rf(&rt2x00dev->chip, RF2524) && - !rt2x00_rf(&rt2x00dev->chip, RF2525) && - !rt2x00_rf(&rt2x00dev->chip, RF2525E) && - !rt2x00_rf(&rt2x00dev->chip, RF5222)) { - ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); - return -ENODEV; - } - - /* - * Identify default antenna configuration. - */ - rt2x00dev->hw->conf.antenna_sel_tx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT); - rt2x00dev->hw->conf.antenna_sel_rx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT); - - /* - * Store led mode, for correct led behaviour. - */ - rt2x00dev->led_mode = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); - - /* - * Detect if this device has an hardware controlled radio. - */ -#ifdef CONFIG_RT2500PCI_RFKILL - if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) - __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); -#endif /* CONFIG_RT2500PCI_RFKILL */ - - /* - * Check if the BBP tuning should be enabled. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); - - if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE)) - __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags); - - /* - * Read the RSSI <-> dBm offset information. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom); - rt2x00dev->rssi_offset = - rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI); - - return 0; -} - -/* - * RF value list for RF2522 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2522[] = { - { 1, 0x00002050, 0x000c1fda, 0x00000101, 0 }, - { 2, 0x00002050, 0x000c1fee, 0x00000101, 0 }, - { 3, 0x00002050, 0x000c2002, 0x00000101, 0 }, - { 4, 0x00002050, 0x000c2016, 0x00000101, 0 }, - { 5, 0x00002050, 0x000c202a, 0x00000101, 0 }, - { 6, 0x00002050, 0x000c203e, 0x00000101, 0 }, - { 7, 0x00002050, 0x000c2052, 0x00000101, 0 }, - { 8, 0x00002050, 0x000c2066, 0x00000101, 0 }, - { 9, 0x00002050, 0x000c207a, 0x00000101, 0 }, - { 10, 0x00002050, 0x000c208e, 0x00000101, 0 }, - { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 }, - { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 }, - { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 }, - { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 }, -}; - -/* - * RF value list for RF2523 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2523[] = { - { 1, 0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b }, - { 2, 0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b }, - { 3, 0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b }, - { 4, 0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b }, - { 5, 0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b }, - { 6, 0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b }, - { 7, 0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b }, - { 8, 0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b }, - { 9, 0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b }, - { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b }, - { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b }, - { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b }, - { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b }, - { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 }, -}; - -/* - * RF value list for RF2524 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2524[] = { - { 1, 0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b }, - { 2, 0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b }, - { 3, 0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b }, - { 4, 0x00032020, 0x00000caa, 0x00000101, 0x00000a1b }, - { 5, 0x00032020, 0x00000cae, 0x00000101, 0x00000a1b }, - { 6, 0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b }, - { 7, 0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b }, - { 8, 0x00032020, 0x00000cba, 0x00000101, 0x00000a1b }, - { 9, 0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b }, - { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b }, - { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b }, - { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b }, - { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b }, - { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 }, -}; - -/* - * RF value list for RF2525 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2525[] = { - { 1, 0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b }, - { 2, 0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b }, - { 3, 0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b }, - { 4, 0x00022020, 0x00080caa, 0x00060111, 0x00000a1b }, - { 5, 0x00022020, 0x00080cae, 0x00060111, 0x00000a1b }, - { 6, 0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b }, - { 7, 0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b }, - { 8, 0x00022020, 0x00080cba, 0x00060111, 0x00000a1b }, - { 9, 0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b }, - { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b }, - { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b }, - { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b }, - { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b }, - { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 }, -}; - -/* - * RF value list for RF2525e - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2525e[] = { - { 1, 0x00022020, 0x00081136, 0x00060111, 0x00000a0b }, - { 2, 0x00022020, 0x0008113a, 0x00060111, 0x00000a0b }, - { 3, 0x00022020, 0x0008113e, 0x00060111, 0x00000a0b }, - { 4, 0x00022020, 0x00081182, 0x00060111, 0x00000a0b }, - { 5, 0x00022020, 0x00081186, 0x00060111, 0x00000a0b }, - { 6, 0x00022020, 0x0008118a, 0x00060111, 0x00000a0b }, - { 7, 0x00022020, 0x0008118e, 0x00060111, 0x00000a0b }, - { 8, 0x00022020, 0x00081192, 0x00060111, 0x00000a0b }, - { 9, 0x00022020, 0x00081196, 0x00060111, 0x00000a0b }, - { 10, 0x00022020, 0x0008119a, 0x00060111, 0x00000a0b }, - { 11, 0x00022020, 0x0008119e, 0x00060111, 0x00000a0b }, - { 12, 0x00022020, 0x000811a2, 0x00060111, 0x00000a0b }, - { 13, 0x00022020, 0x000811a6, 0x00060111, 0x00000a0b }, - { 14, 0x00022020, 0x000811ae, 0x00060111, 0x00000a1b }, -}; - -/* - * RF value list for RF5222 - * Supports: 2.4 GHz & 5.2 GHz - */ -static const struct rf_channel rf_vals_5222[] = { - { 1, 0x00022020, 0x00001136, 0x00000101, 0x00000a0b }, - { 2, 0x00022020, 0x0000113a, 0x00000101, 0x00000a0b }, - { 3, 0x00022020, 0x0000113e, 0x00000101, 0x00000a0b }, - { 4, 0x00022020, 0x00001182, 0x00000101, 0x00000a0b }, - { 5, 0x00022020, 0x00001186, 0x00000101, 0x00000a0b }, - { 6, 0x00022020, 0x0000118a, 0x00000101, 0x00000a0b }, - { 7, 0x00022020, 0x0000118e, 0x00000101, 0x00000a0b }, - { 8, 0x00022020, 0x00001192, 0x00000101, 0x00000a0b }, - { 9, 0x00022020, 0x00001196, 0x00000101, 0x00000a0b }, - { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b }, - { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b }, - { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b }, - { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b }, - { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b }, - - /* 802.11 UNI / HyperLan 2 */ - { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f }, - { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f }, - { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f }, - { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f }, - { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f }, - { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f }, - { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f }, - { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f }, - - /* 802.11 HyperLan 2 */ - { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f }, - { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f }, - { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f }, - { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f }, - { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f }, - { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f }, - { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f }, - { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f }, - { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f }, - { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f }, - - /* 802.11 UNII */ - { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f }, - { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 }, - { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 }, - { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 }, - { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 }, -}; - -static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) -{ - struct hw_mode_spec *spec = &rt2x00dev->spec; - u8 *txpower; - unsigned int i; - - /* - * Initialize all hw fields. - */ - rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING; - rt2x00dev->hw->extra_tx_headroom = 0; - rt2x00dev->hw->max_signal = MAX_SIGNAL; - rt2x00dev->hw->max_rssi = MAX_RX_SSI; - rt2x00dev->hw->queues = 2; - - SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev); - SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, - rt2x00_eeprom_addr(rt2x00dev, - EEPROM_MAC_ADDR_0)); - - /* - * Convert tx_power array in eeprom. - */ - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); - for (i = 0; i < 14; i++) - txpower[i] = TXPOWER_FROM_DEV(txpower[i]); - - /* - * Initialize hw_mode information. - */ - spec->num_modes = 2; - spec->num_rates = 12; - spec->tx_power_a = NULL; - spec->tx_power_bg = txpower; - spec->tx_power_default = DEFAULT_TXPOWER; - - if (rt2x00_rf(&rt2x00dev->chip, RF2522)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522); - spec->channels = rf_vals_bg_2522; - } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523); - spec->channels = rf_vals_bg_2523; - } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524); - spec->channels = rf_vals_bg_2524; - } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525); - spec->channels = rf_vals_bg_2525; - } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e); - spec->channels = rf_vals_bg_2525e; - } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) { - spec->num_channels = ARRAY_SIZE(rf_vals_5222); - spec->channels = rf_vals_5222; - spec->num_modes = 3; - } -} - -static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev) -{ - int retval; - - /* - * Allocate eeprom data. - */ - retval = rt2500pci_validate_eeprom(rt2x00dev); - if (retval) - return retval; - - retval = rt2500pci_init_eeprom(rt2x00dev); - if (retval) - return retval; - - /* - * Initialize hw specifications. - */ - rt2500pci_probe_hw_mode(rt2x00dev); - - /* - * This device requires the beacon ring - */ - __set_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags); - - /* - * Set the rssi offset. - */ - rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; - - return 0; -} - -/* - * IEEE80211 stack callback functions. - */ -static void rt2500pci_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - int mc_count, - struct dev_addr_list *mc_list) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct interface *intf = &rt2x00dev->interface; - u32 reg; - - /* - * Mask off any flags we are going to ignore from - * the total_flags field. - */ - *total_flags &= - FIF_ALLMULTI | - FIF_FCSFAIL | - FIF_PLCPFAIL | - FIF_CONTROL | - FIF_OTHER_BSS | - FIF_PROMISC_IN_BSS; - - /* - * Apply some rules to the filters: - * - Some filters imply different filters to be set. - * - Some things we can't filter out at all. - * - Some filters are set based on interface type. - */ - if (mc_count) - *total_flags |= FIF_ALLMULTI; - if (*total_flags & FIF_OTHER_BSS || - *total_flags & FIF_PROMISC_IN_BSS) - *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS; - if (is_interface_type(intf, IEEE80211_IF_TYPE_AP)) - *total_flags |= FIF_PROMISC_IN_BSS; - - /* - * Check if there is any work left for us. - */ - if (intf->filter == *total_flags) - return; - intf->filter = *total_flags; - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * and broadcast frames will always be accepted since - * there is no filter for it at this time. - */ - rt2x00pci_register_read(rt2x00dev, RXCSR0, ®); - rt2x00_set_field32(®, RXCSR0_DROP_CRC, - !(*total_flags & FIF_FCSFAIL)); - rt2x00_set_field32(®, RXCSR0_DROP_PHYSICAL, - !(*total_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, - !(*total_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, RXCSR0_DROP_TODS, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1); - rt2x00_set_field32(®, RXCSR0_DROP_MCAST, - !(*total_flags & FIF_ALLMULTI)); - rt2x00_set_field32(®, RXCSR0_DROP_BCAST, 0); - rt2x00pci_register_write(rt2x00dev, RXCSR0, reg); -} - -static int rt2500pci_set_retry_limit(struct ieee80211_hw *hw, - u32 short_retry, u32 long_retry) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - - rt2x00pci_register_read(rt2x00dev, CSR11, ®); - rt2x00_set_field32(®, CSR11_LONG_RETRY, long_retry); - rt2x00_set_field32(®, CSR11_SHORT_RETRY, short_retry); - rt2x00pci_register_write(rt2x00dev, CSR11, reg); - - return 0; -} - -static u64 rt2500pci_get_tsf(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u64 tsf; - u32 reg; - - rt2x00pci_register_read(rt2x00dev, CSR17, ®); - tsf = (u64) rt2x00_get_field32(reg, CSR17_HIGH_TSFTIMER) << 32; - rt2x00pci_register_read(rt2x00dev, CSR16, ®); - tsf |= rt2x00_get_field32(reg, CSR16_LOW_TSFTIMER); - - return tsf; -} - -static void rt2500pci_reset_tsf(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - - rt2x00pci_register_write(rt2x00dev, CSR16, 0); - rt2x00pci_register_write(rt2x00dev, CSR17, 0); -} - -static int rt2500pci_tx_last_beacon(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - - rt2x00pci_register_read(rt2x00dev, CSR15, ®); - return rt2x00_get_field32(reg, CSR15_BEACON_SENT); -} - -static const struct ieee80211_ops rt2500pci_mac80211_ops = { - .tx = rt2x00mac_tx, - .start = rt2x00mac_start, - .stop = rt2x00mac_stop, - .add_interface = rt2x00mac_add_interface, - .remove_interface = rt2x00mac_remove_interface, - .config = rt2x00mac_config, - .config_interface = rt2x00mac_config_interface, - .configure_filter = rt2500pci_configure_filter, - .get_stats = rt2x00mac_get_stats, - .set_retry_limit = rt2500pci_set_retry_limit, - .erp_ie_changed = rt2x00mac_erp_ie_changed, - .conf_tx = rt2x00mac_conf_tx, - .get_tx_stats = rt2x00mac_get_tx_stats, - .get_tsf = rt2500pci_get_tsf, - .reset_tsf = rt2500pci_reset_tsf, - .beacon_update = rt2x00pci_beacon_update, - .tx_last_beacon = rt2500pci_tx_last_beacon, -}; - -static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = { - .irq_handler = rt2500pci_interrupt, - .probe_hw = rt2500pci_probe_hw, - .initialize = rt2x00pci_initialize, - .uninitialize = rt2x00pci_uninitialize, - .set_device_state = rt2500pci_set_device_state, - .rfkill_poll = rt2500pci_rfkill_poll, - .link_stats = rt2500pci_link_stats, - .reset_tuner = rt2500pci_reset_tuner, - .link_tuner = rt2500pci_link_tuner, - .write_tx_desc = rt2500pci_write_tx_desc, - .write_tx_data = rt2x00pci_write_tx_data, - .kick_tx_queue = rt2500pci_kick_tx_queue, - .fill_rxdone = rt2500pci_fill_rxdone, - .config_mac_addr = rt2500pci_config_mac_addr, - .config_bssid = rt2500pci_config_bssid, - .config_type = rt2500pci_config_type, - .config_preamble = rt2500pci_config_preamble, - .config = rt2500pci_config, -}; - -static const struct rt2x00_ops rt2500pci_ops = { - .name = DRV_NAME, - .rxd_size = RXD_DESC_SIZE, - .txd_size = TXD_DESC_SIZE, - .eeprom_size = EEPROM_SIZE, - .rf_size = RF_SIZE, - .lib = &rt2500pci_rt2x00_ops, - .hw = &rt2500pci_mac80211_ops, -#ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt2500pci_rt2x00debug, -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -}; - -/* - * RT2500pci module information. - */ -static struct pci_device_id rt2500pci_device_table[] = { - { PCI_DEVICE(0x1814, 0x0201), PCI_DEVICE_DATA(&rt2500pci_ops) }, - { 0, } -}; - -MODULE_AUTHOR(DRV_PROJECT); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("Ralink RT2500 PCI & PCMCIA Wireless LAN driver."); -MODULE_SUPPORTED_DEVICE("Ralink RT2560 PCI & PCMCIA chipset based cards"); -MODULE_DEVICE_TABLE(pci, rt2500pci_device_table); -MODULE_LICENSE("GPL"); - -static struct pci_driver rt2500pci_driver = { - .name = DRV_NAME, - .id_table = rt2500pci_device_table, - .probe = rt2x00pci_probe, - .remove = __devexit_p(rt2x00pci_remove), - .suspend = rt2x00pci_suspend, - .resume = rt2x00pci_resume, -}; - -static int __init rt2500pci_init(void) -{ - return pci_register_driver(&rt2500pci_driver); -} - -static void __exit rt2500pci_exit(void) -{ - pci_unregister_driver(&rt2500pci_driver); -} - -module_init(rt2500pci_init); -module_exit(rt2500pci_exit); diff --git a/package/rt2x00/src/rt2500pci.h b/package/rt2x00/src/rt2500pci.h deleted file mode 100644 index d92aa56b2f4..00000000000 --- a/package/rt2x00/src/rt2500pci.h +++ /dev/null @@ -1,1236 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2500pci - Abstract: Data structures and registers for the rt2500pci module. - Supported chipsets: RT2560. - */ - -#ifndef RT2500PCI_H -#define RT2500PCI_H - -/* - * RF chip defines. - */ -#define RF2522 0x0000 -#define RF2523 0x0001 -#define RF2524 0x0002 -#define RF2525 0x0003 -#define RF2525E 0x0004 -#define RF5222 0x0010 - -/* - * RT2560 version - */ -#define RT2560_VERSION_B 2 -#define RT2560_VERSION_C 3 -#define RT2560_VERSION_D 4 - -/* - * Signal information. - * Defaul offset is required for RSSI <-> dBm conversion. - */ -#define MAX_SIGNAL 100 -#define MAX_RX_SSI -1 -#define DEFAULT_RSSI_OFFSET 121 - -/* - * Register layout information. - */ -#define CSR_REG_BASE 0x0000 -#define CSR_REG_SIZE 0x0174 -#define EEPROM_BASE 0x0000 -#define EEPROM_SIZE 0x0200 -#define BBP_SIZE 0x0040 -#define RF_SIZE 0x0014 - -/* - * Control/Status Registers(CSR). - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * CSR0: ASIC revision number. - */ -#define CSR0 0x0000 - -/* - * CSR1: System control register. - * SOFT_RESET: Software reset, 1: reset, 0: normal. - * BBP_RESET: Hardware reset, 1: reset, 0, release. - * HOST_READY: Host ready after initialization. - */ -#define CSR1 0x0004 -#define CSR1_SOFT_RESET FIELD32(0x00000001) -#define CSR1_BBP_RESET FIELD32(0x00000002) -#define CSR1_HOST_READY FIELD32(0x00000004) - -/* - * CSR2: System admin status register (invalid). - */ -#define CSR2 0x0008 - -/* - * CSR3: STA MAC address register 0. - */ -#define CSR3 0x000c -#define CSR3_BYTE0 FIELD32(0x000000ff) -#define CSR3_BYTE1 FIELD32(0x0000ff00) -#define CSR3_BYTE2 FIELD32(0x00ff0000) -#define CSR3_BYTE3 FIELD32(0xff000000) - -/* - * CSR4: STA MAC address register 1. - */ -#define CSR4 0x0010 -#define CSR4_BYTE4 FIELD32(0x000000ff) -#define CSR4_BYTE5 FIELD32(0x0000ff00) - -/* - * CSR5: BSSID register 0. - */ -#define CSR5 0x0014 -#define CSR5_BYTE0 FIELD32(0x000000ff) -#define CSR5_BYTE1 FIELD32(0x0000ff00) -#define CSR5_BYTE2 FIELD32(0x00ff0000) -#define CSR5_BYTE3 FIELD32(0xff000000) - -/* - * CSR6: BSSID register 1. - */ -#define CSR6 0x0018 -#define CSR6_BYTE4 FIELD32(0x000000ff) -#define CSR6_BYTE5 FIELD32(0x0000ff00) - -/* - * CSR7: Interrupt source register. - * Write 1 to clear. - * TBCN_EXPIRE: Beacon timer expired interrupt. - * TWAKE_EXPIRE: Wakeup timer expired interrupt. - * TATIMW_EXPIRE: Timer of atim window expired interrupt. - * TXDONE_TXRING: Tx ring transmit done interrupt. - * TXDONE_ATIMRING: Atim ring transmit done interrupt. - * TXDONE_PRIORING: Priority ring transmit done interrupt. - * RXDONE: Receive done interrupt. - * DECRYPTION_DONE: Decryption done interrupt. - * ENCRYPTION_DONE: Encryption done interrupt. - * UART1_TX_TRESHOLD: UART1 TX reaches threshold. - * UART1_RX_TRESHOLD: UART1 RX reaches threshold. - * UART1_IDLE_TRESHOLD: UART1 IDLE over threshold. - * UART1_TX_BUFF_ERROR: UART1 TX buffer error. - * UART1_RX_BUFF_ERROR: UART1 RX buffer error. - * UART2_TX_TRESHOLD: UART2 TX reaches threshold. - * UART2_RX_TRESHOLD: UART2 RX reaches threshold. - * UART2_IDLE_TRESHOLD: UART2 IDLE over threshold. - * UART2_TX_BUFF_ERROR: UART2 TX buffer error. - * UART2_RX_BUFF_ERROR: UART2 RX buffer error. - * TIMER_CSR3_EXPIRE: TIMECSR3 timer expired (802.1H quiet period). - - */ -#define CSR7 0x001c -#define CSR7_TBCN_EXPIRE FIELD32(0x00000001) -#define CSR7_TWAKE_EXPIRE FIELD32(0x00000002) -#define CSR7_TATIMW_EXPIRE FIELD32(0x00000004) -#define CSR7_TXDONE_TXRING FIELD32(0x00000008) -#define CSR7_TXDONE_ATIMRING FIELD32(0x00000010) -#define CSR7_TXDONE_PRIORING FIELD32(0x00000020) -#define CSR7_RXDONE FIELD32(0x00000040) -#define CSR7_DECRYPTION_DONE FIELD32(0x00000080) -#define CSR7_ENCRYPTION_DONE FIELD32(0x00000100) -#define CSR7_UART1_TX_TRESHOLD FIELD32(0x00000200) -#define CSR7_UART1_RX_TRESHOLD FIELD32(0x00000400) -#define CSR7_UART1_IDLE_TRESHOLD FIELD32(0x00000800) -#define CSR7_UART1_TX_BUFF_ERROR FIELD32(0x00001000) -#define CSR7_UART1_RX_BUFF_ERROR FIELD32(0x00002000) -#define CSR7_UART2_TX_TRESHOLD FIELD32(0x00004000) -#define CSR7_UART2_RX_TRESHOLD FIELD32(0x00008000) -#define CSR7_UART2_IDLE_TRESHOLD FIELD32(0x00010000) -#define CSR7_UART2_TX_BUFF_ERROR FIELD32(0x00020000) -#define CSR7_UART2_RX_BUFF_ERROR FIELD32(0x00040000) -#define CSR7_TIMER_CSR3_EXPIRE FIELD32(0x00080000) - -/* - * CSR8: Interrupt mask register. - * Write 1 to mask interrupt. - * TBCN_EXPIRE: Beacon timer expired interrupt. - * TWAKE_EXPIRE: Wakeup timer expired interrupt. - * TATIMW_EXPIRE: Timer of atim window expired interrupt. - * TXDONE_TXRING: Tx ring transmit done interrupt. - * TXDONE_ATIMRING: Atim ring transmit done interrupt. - * TXDONE_PRIORING: Priority ring transmit done interrupt. - * RXDONE: Receive done interrupt. - * DECRYPTION_DONE: Decryption done interrupt. - * ENCRYPTION_DONE: Encryption done interrupt. - * UART1_TX_TRESHOLD: UART1 TX reaches threshold. - * UART1_RX_TRESHOLD: UART1 RX reaches threshold. - * UART1_IDLE_TRESHOLD: UART1 IDLE over threshold. - * UART1_TX_BUFF_ERROR: UART1 TX buffer error. - * UART1_RX_BUFF_ERROR: UART1 RX buffer error. - * UART2_TX_TRESHOLD: UART2 TX reaches threshold. - * UART2_RX_TRESHOLD: UART2 RX reaches threshold. - * UART2_IDLE_TRESHOLD: UART2 IDLE over threshold. - * UART2_TX_BUFF_ERROR: UART2 TX buffer error. - * UART2_RX_BUFF_ERROR: UART2 RX buffer error. - * TIMER_CSR3_EXPIRE: TIMECSR3 timer expired (802.1H quiet period). - */ -#define CSR8 0x0020 -#define CSR8_TBCN_EXPIRE FIELD32(0x00000001) -#define CSR8_TWAKE_EXPIRE FIELD32(0x00000002) -#define CSR8_TATIMW_EXPIRE FIELD32(0x00000004) -#define CSR8_TXDONE_TXRING FIELD32(0x00000008) -#define CSR8_TXDONE_ATIMRING FIELD32(0x00000010) -#define CSR8_TXDONE_PRIORING FIELD32(0x00000020) -#define CSR8_RXDONE FIELD32(0x00000040) -#define CSR8_DECRYPTION_DONE FIELD32(0x00000080) -#define CSR8_ENCRYPTION_DONE FIELD32(0x00000100) -#define CSR8_UART1_TX_TRESHOLD FIELD32(0x00000200) -#define CSR8_UART1_RX_TRESHOLD FIELD32(0x00000400) -#define CSR8_UART1_IDLE_TRESHOLD FIELD32(0x00000800) -#define CSR8_UART1_TX_BUFF_ERROR FIELD32(0x00001000) -#define CSR8_UART1_RX_BUFF_ERROR FIELD32(0x00002000) -#define CSR8_UART2_TX_TRESHOLD FIELD32(0x00004000) -#define CSR8_UART2_RX_TRESHOLD FIELD32(0x00008000) -#define CSR8_UART2_IDLE_TRESHOLD FIELD32(0x00010000) -#define CSR8_UART2_TX_BUFF_ERROR FIELD32(0x00020000) -#define CSR8_UART2_RX_BUFF_ERROR FIELD32(0x00040000) -#define CSR8_TIMER_CSR3_EXPIRE FIELD32(0x00080000) - -/* - * CSR9: Maximum frame length register. - * MAX_FRAME_UNIT: Maximum frame length in 128b unit, default: 12. - */ -#define CSR9 0x0024 -#define CSR9_MAX_FRAME_UNIT FIELD32(0x00000f80) - -/* - * SECCSR0: WEP control register. - * KICK_DECRYPT: Kick decryption engine, self-clear. - * ONE_SHOT: 0: ring mode, 1: One shot only mode. - * DESC_ADDRESS: Descriptor physical address of frame. - */ -#define SECCSR0 0x0028 -#define SECCSR0_KICK_DECRYPT FIELD32(0x00000001) -#define SECCSR0_ONE_SHOT FIELD32(0x00000002) -#define SECCSR0_DESC_ADDRESS FIELD32(0xfffffffc) - -/* - * CSR11: Back-off control register. - * CWMIN: CWmin. Default cwmin is 31 (2^5 - 1). - * CWMAX: CWmax. Default cwmax is 1023 (2^10 - 1). - * SLOT_TIME: Slot time, default is 20us for 802.11b - * CW_SELECT: CWmin/CWmax selection, 1: Register, 0: TXD. - * LONG_RETRY: Long retry count. - * SHORT_RETRY: Short retry count. - */ -#define CSR11 0x002c -#define CSR11_CWMIN FIELD32(0x0000000f) -#define CSR11_CWMAX FIELD32(0x000000f0) -#define CSR11_SLOT_TIME FIELD32(0x00001f00) -#define CSR11_CW_SELECT FIELD32(0x00002000) -#define CSR11_LONG_RETRY FIELD32(0x00ff0000) -#define CSR11_SHORT_RETRY FIELD32(0xff000000) - -/* - * CSR12: Synchronization configuration register 0. - * All units in 1/16 TU. - * BEACON_INTERVAL: Beacon interval, default is 100 TU. - * CFP_MAX_DURATION: Cfp maximum duration, default is 100 TU. - */ -#define CSR12 0x0030 -#define CSR12_BEACON_INTERVAL FIELD32(0x0000ffff) -#define CSR12_CFP_MAX_DURATION FIELD32(0xffff0000) - -/* - * CSR13: Synchronization configuration register 1. - * All units in 1/16 TU. - * ATIMW_DURATION: Atim window duration. - * CFP_PERIOD: Cfp period, default is 0 TU. - */ -#define CSR13 0x0034 -#define CSR13_ATIMW_DURATION FIELD32(0x0000ffff) -#define CSR13_CFP_PERIOD FIELD32(0x00ff0000) - -/* - * CSR14: Synchronization control register. - * TSF_COUNT: Enable tsf auto counting. - * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode. - * TBCN: Enable tbcn with reload value. - * TCFP: Enable tcfp & cfp / cp switching. - * TATIMW: Enable tatimw & atim window switching. - * BEACON_GEN: Enable beacon generator. - * CFP_COUNT_PRELOAD: Cfp count preload value. - * TBCM_PRELOAD: Tbcn preload value in units of 64us. - */ -#define CSR14 0x0038 -#define CSR14_TSF_COUNT FIELD32(0x00000001) -#define CSR14_TSF_SYNC FIELD32(0x00000006) -#define CSR14_TBCN FIELD32(0x00000008) -#define CSR14_TCFP FIELD32(0x00000010) -#define CSR14_TATIMW FIELD32(0x00000020) -#define CSR14_BEACON_GEN FIELD32(0x00000040) -#define CSR14_CFP_COUNT_PRELOAD FIELD32(0x0000ff00) -#define CSR14_TBCM_PRELOAD FIELD32(0xffff0000) - -/* - * CSR15: Synchronization status register. - * CFP: ASIC is in contention-free period. - * ATIMW: ASIC is in ATIM window. - * BEACON_SENT: Beacon is send. - */ -#define CSR15 0x003c -#define CSR15_CFP FIELD32(0x00000001) -#define CSR15_ATIMW FIELD32(0x00000002) -#define CSR15_BEACON_SENT FIELD32(0x00000004) - -/* - * CSR16: TSF timer register 0. - */ -#define CSR16 0x0040 -#define CSR16_LOW_TSFTIMER FIELD32(0xffffffff) - -/* - * CSR17: TSF timer register 1. - */ -#define CSR17 0x0044 -#define CSR17_HIGH_TSFTIMER FIELD32(0xffffffff) - -/* - * CSR18: IFS timer register 0. - * SIFS: Sifs, default is 10 us. - * PIFS: Pifs, default is 30 us. - */ -#define CSR18 0x0048 -#define CSR18_SIFS FIELD32(0x000001ff) -#define CSR18_PIFS FIELD32(0x001f0000) - -/* - * CSR19: IFS timer register 1. - * DIFS: Difs, default is 50 us. - * EIFS: Eifs, default is 364 us. - */ -#define CSR19 0x004c -#define CSR19_DIFS FIELD32(0x0000ffff) -#define CSR19_EIFS FIELD32(0xffff0000) - -/* - * CSR20: Wakeup timer register. - * DELAY_AFTER_TBCN: Delay after tbcn expired in units of 1/16 TU. - * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup. - * AUTOWAKE: Enable auto wakeup / sleep mechanism. - */ -#define CSR20 0x0050 -#define CSR20_DELAY_AFTER_TBCN FIELD32(0x0000ffff) -#define CSR20_TBCN_BEFORE_WAKEUP FIELD32(0x00ff0000) -#define CSR20_AUTOWAKE FIELD32(0x01000000) - -/* - * CSR21: EEPROM control register. - * RELOAD: Write 1 to reload eeprom content. - * TYPE_93C46: 1: 93c46, 0:93c66. - */ -#define CSR21 0x0054 -#define CSR21_RELOAD FIELD32(0x00000001) -#define CSR21_EEPROM_DATA_CLOCK FIELD32(0x00000002) -#define CSR21_EEPROM_CHIP_SELECT FIELD32(0x00000004) -#define CSR21_EEPROM_DATA_IN FIELD32(0x00000008) -#define CSR21_EEPROM_DATA_OUT FIELD32(0x00000010) -#define CSR21_TYPE_93C46 FIELD32(0x00000020) - -/* - * CSR22: CFP control register. - * CFP_DURATION_REMAIN: Cfp duration remain, in units of TU. - * RELOAD_CFP_DURATION: Write 1 to reload cfp duration remain. - */ -#define CSR22 0x0058 -#define CSR22_CFP_DURATION_REMAIN FIELD32(0x0000ffff) -#define CSR22_RELOAD_CFP_DURATION FIELD32(0x00010000) - -/* - * Transmit related CSRs. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * TXCSR0: TX Control Register. - * KICK_TX: Kick tx ring. - * KICK_ATIM: Kick atim ring. - * KICK_PRIO: Kick priority ring. - * ABORT: Abort all transmit related ring operation. - */ -#define TXCSR0 0x0060 -#define TXCSR0_KICK_TX FIELD32(0x00000001) -#define TXCSR0_KICK_ATIM FIELD32(0x00000002) -#define TXCSR0_KICK_PRIO FIELD32(0x00000004) -#define TXCSR0_ABORT FIELD32(0x00000008) - -/* - * TXCSR1: TX Configuration Register. - * ACK_TIMEOUT: Ack timeout, default = sifs + 2*slottime + acktime @ 1mbps. - * ACK_CONSUME_TIME: Ack consume time, default = sifs + acktime @ 1mbps. - * TSF_OFFSET: Insert tsf offset. - * AUTORESPONDER: Enable auto responder which include ack & cts. - */ -#define TXCSR1 0x0064 -#define TXCSR1_ACK_TIMEOUT FIELD32(0x000001ff) -#define TXCSR1_ACK_CONSUME_TIME FIELD32(0x0003fe00) -#define TXCSR1_TSF_OFFSET FIELD32(0x00fc0000) -#define TXCSR1_AUTORESPONDER FIELD32(0x01000000) - -/* - * TXCSR2: Tx descriptor configuration register. - * TXD_SIZE: Tx descriptor size, default is 48. - * NUM_TXD: Number of tx entries in ring. - * NUM_ATIM: Number of atim entries in ring. - * NUM_PRIO: Number of priority entries in ring. - */ -#define TXCSR2 0x0068 -#define TXCSR2_TXD_SIZE FIELD32(0x000000ff) -#define TXCSR2_NUM_TXD FIELD32(0x0000ff00) -#define TXCSR2_NUM_ATIM FIELD32(0x00ff0000) -#define TXCSR2_NUM_PRIO FIELD32(0xff000000) - -/* - * TXCSR3: TX Ring Base address register. - */ -#define TXCSR3 0x006c -#define TXCSR3_TX_RING_REGISTER FIELD32(0xffffffff) - -/* - * TXCSR4: TX Atim Ring Base address register. - */ -#define TXCSR4 0x0070 -#define TXCSR4_ATIM_RING_REGISTER FIELD32(0xffffffff) - -/* - * TXCSR5: TX Prio Ring Base address register. - */ -#define TXCSR5 0x0074 -#define TXCSR5_PRIO_RING_REGISTER FIELD32(0xffffffff) - -/* - * TXCSR6: Beacon Base address register. - */ -#define TXCSR6 0x0078 -#define TXCSR6_BEACON_RING_REGISTER FIELD32(0xffffffff) - -/* - * TXCSR7: Auto responder control register. - * AR_POWERMANAGEMENT: Auto responder power management bit. - */ -#define TXCSR7 0x007c -#define TXCSR7_AR_POWERMANAGEMENT FIELD32(0x00000001) - -/* - * TXCSR8: CCK Tx BBP register. - */ -#define TXCSR8 0x0098 -#define TXCSR8_BBP_ID0 FIELD32(0x0000007f) -#define TXCSR8_BBP_ID0_VALID FIELD32(0x00000080) -#define TXCSR8_BBP_ID1 FIELD32(0x00007f00) -#define TXCSR8_BBP_ID1_VALID FIELD32(0x00008000) -#define TXCSR8_BBP_ID2 FIELD32(0x007f0000) -#define TXCSR8_BBP_ID2_VALID FIELD32(0x00800000) -#define TXCSR8_BBP_ID3 FIELD32(0x7f000000) -#define TXCSR8_BBP_ID3_VALID FIELD32(0x80000000) - -/* - * TXCSR9: OFDM TX BBP registers - * OFDM_SIGNAL: BBP rate field address for OFDM. - * OFDM_SERVICE: BBP service field address for OFDM. - * OFDM_LENGTH_LOW: BBP length low byte address for OFDM. - * OFDM_LENGTH_HIGH: BBP length high byte address for OFDM. - */ -#define TXCSR9 0x0094 -#define TXCSR9_OFDM_RATE FIELD32(0x000000ff) -#define TXCSR9_OFDM_SERVICE FIELD32(0x0000ff00) -#define TXCSR9_OFDM_LENGTH_LOW FIELD32(0x00ff0000) -#define TXCSR9_OFDM_LENGTH_HIGH FIELD32(0xff000000) - -/* - * Receive related CSRs. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * RXCSR0: RX Control Register. - * DISABLE_RX: Disable rx engine. - * DROP_CRC: Drop crc error. - * DROP_PHYSICAL: Drop physical error. - * DROP_CONTROL: Drop control frame. - * DROP_NOT_TO_ME: Drop not to me unicast frame. - * DROP_TODS: Drop frame tods bit is true. - * DROP_VERSION_ERROR: Drop version error frame. - * PASS_CRC: Pass all packets with crc attached. - * PASS_CRC: Pass all packets with crc attached. - * PASS_PLCP: Pass all packets with 4 bytes PLCP attached. - * DROP_MCAST: Drop multicast frames. - * DROP_BCAST: Drop broadcast frames. - * ENABLE_QOS: Accept QOS data frame and parse QOS field. - */ -#define RXCSR0 0x0080 -#define RXCSR0_DISABLE_RX FIELD32(0x00000001) -#define RXCSR0_DROP_CRC FIELD32(0x00000002) -#define RXCSR0_DROP_PHYSICAL FIELD32(0x00000004) -#define RXCSR0_DROP_CONTROL FIELD32(0x00000008) -#define RXCSR0_DROP_NOT_TO_ME FIELD32(0x00000010) -#define RXCSR0_DROP_TODS FIELD32(0x00000020) -#define RXCSR0_DROP_VERSION_ERROR FIELD32(0x00000040) -#define RXCSR0_PASS_CRC FIELD32(0x00000080) -#define RXCSR0_PASS_PLCP FIELD32(0x00000100) -#define RXCSR0_DROP_MCAST FIELD32(0x00000200) -#define RXCSR0_DROP_BCAST FIELD32(0x00000400) -#define RXCSR0_ENABLE_QOS FIELD32(0x00000800) - -/* - * RXCSR1: RX descriptor configuration register. - * RXD_SIZE: Rx descriptor size, default is 32b. - * NUM_RXD: Number of rx entries in ring. - */ -#define RXCSR1 0x0084 -#define RXCSR1_RXD_SIZE FIELD32(0x000000ff) -#define RXCSR1_NUM_RXD FIELD32(0x0000ff00) - -/* - * RXCSR2: RX Ring base address register. - */ -#define RXCSR2 0x0088 -#define RXCSR2_RX_RING_REGISTER FIELD32(0xffffffff) - -/* - * RXCSR3: BBP ID register for Rx operation. - * BBP_ID#: BBP register # id. - * BBP_ID#_VALID: BBP register # id is valid or not. - */ -#define RXCSR3 0x0090 -#define RXCSR3_BBP_ID0 FIELD32(0x0000007f) -#define RXCSR3_BBP_ID0_VALID FIELD32(0x00000080) -#define RXCSR3_BBP_ID1 FIELD32(0x00007f00) -#define RXCSR3_BBP_ID1_VALID FIELD32(0x00008000) -#define RXCSR3_BBP_ID2 FIELD32(0x007f0000) -#define RXCSR3_BBP_ID2_VALID FIELD32(0x00800000) -#define RXCSR3_BBP_ID3 FIELD32(0x7f000000) -#define RXCSR3_BBP_ID3_VALID FIELD32(0x80000000) - -/* - * ARCSR1: Auto Responder PLCP config register 1. - * AR_BBP_DATA#: Auto responder BBP register # data. - * AR_BBP_ID#: Auto responder BBP register # Id. - */ -#define ARCSR1 0x009c -#define ARCSR1_AR_BBP_DATA2 FIELD32(0x000000ff) -#define ARCSR1_AR_BBP_ID2 FIELD32(0x0000ff00) -#define ARCSR1_AR_BBP_DATA3 FIELD32(0x00ff0000) -#define ARCSR1_AR_BBP_ID3 FIELD32(0xff000000) - -/* - * Miscellaneous Registers. - * Some values are set in TU, whereas 1 TU == 1024 us. - - */ - -/* - * PCICSR: PCI control register. - * BIG_ENDIAN: 1: big endian, 0: little endian. - * RX_TRESHOLD: Rx threshold in dw to start pci access - * 0: 16dw (default), 1: 8dw, 2: 4dw, 3: 32dw. - * TX_TRESHOLD: Tx threshold in dw to start pci access - * 0: 0dw (default), 1: 1dw, 2: 4dw, 3: forward. - * BURST_LENTH: Pci burst length 0: 4dw (default, 1: 8dw, 2: 16dw, 3:32dw. - * ENABLE_CLK: Enable clk_run, pci clock can't going down to non-operational. - * READ_MULTIPLE: Enable memory read multiple. - * WRITE_INVALID: Enable memory write & invalid. - */ -#define PCICSR 0x008c -#define PCICSR_BIG_ENDIAN FIELD32(0x00000001) -#define PCICSR_RX_TRESHOLD FIELD32(0x00000006) -#define PCICSR_TX_TRESHOLD FIELD32(0x00000018) -#define PCICSR_BURST_LENTH FIELD32(0x00000060) -#define PCICSR_ENABLE_CLK FIELD32(0x00000080) -#define PCICSR_READ_MULTIPLE FIELD32(0x00000100) -#define PCICSR_WRITE_INVALID FIELD32(0x00000200) - -/* - * CNT0: FCS error count. - * FCS_ERROR: FCS error count, cleared when read. - */ -#define CNT0 0x00a0 -#define CNT0_FCS_ERROR FIELD32(0x0000ffff) - -/* - * Statistic Register. - * CNT1: PLCP error count. - * CNT2: Long error count. - */ -#define TIMECSR2 0x00a8 -#define CNT1 0x00ac -#define CNT2 0x00b0 -#define TIMECSR3 0x00b4 - -/* - * CNT3: CCA false alarm count. - */ -#define CNT3 0x00b8 -#define CNT3_FALSE_CCA FIELD32(0x0000ffff) - -/* - * Statistic Register. - * CNT4: Rx FIFO overflow count. - * CNT5: Tx FIFO underrun count. - */ -#define CNT4 0x00bc -#define CNT5 0x00c0 - -/* - * Baseband Control Register. - */ - -/* - * PWRCSR0: Power mode configuration register. - */ -#define PWRCSR0 0x00c4 - -/* - * Power state transition time registers. - */ -#define PSCSR0 0x00c8 -#define PSCSR1 0x00cc -#define PSCSR2 0x00d0 -#define PSCSR3 0x00d4 - -/* - * PWRCSR1: Manual power control / status register. - * Allowed state: 0 deep_sleep, 1: sleep, 2: standby, 3: awake. - * SET_STATE: Set state. Write 1 to trigger, self cleared. - * BBP_DESIRE_STATE: BBP desired state. - * RF_DESIRE_STATE: RF desired state. - * BBP_CURR_STATE: BBP current state. - * RF_CURR_STATE: RF current state. - * PUT_TO_SLEEP: Put to sleep. Write 1 to trigger, self cleared. - */ -#define PWRCSR1 0x00d8 -#define PWRCSR1_SET_STATE FIELD32(0x00000001) -#define PWRCSR1_BBP_DESIRE_STATE FIELD32(0x00000006) -#define PWRCSR1_RF_DESIRE_STATE FIELD32(0x00000018) -#define PWRCSR1_BBP_CURR_STATE FIELD32(0x00000060) -#define PWRCSR1_RF_CURR_STATE FIELD32(0x00000180) -#define PWRCSR1_PUT_TO_SLEEP FIELD32(0x00000200) - -/* - * TIMECSR: Timer control register. - * US_COUNT: 1 us timer count in units of clock cycles. - * US_64_COUNT: 64 us timer count in units of 1 us timer. - * BEACON_EXPECT: Beacon expect window. - */ -#define TIMECSR 0x00dc -#define TIMECSR_US_COUNT FIELD32(0x000000ff) -#define TIMECSR_US_64_COUNT FIELD32(0x0000ff00) -#define TIMECSR_BEACON_EXPECT FIELD32(0x00070000) - -/* - * MACCSR0: MAC configuration register 0. - */ -#define MACCSR0 0x00e0 - -/* - * MACCSR1: MAC configuration register 1. - * KICK_RX: Kick one-shot rx in one-shot rx mode. - * ONESHOT_RXMODE: Enable one-shot rx mode for debugging. - * BBPRX_RESET_MODE: Ralink bbp rx reset mode. - * AUTO_TXBBP: Auto tx logic access bbp control register. - * AUTO_RXBBP: Auto rx logic access bbp control register. - * LOOPBACK: Loopback mode. 0: normal, 1: internal, 2: external, 3:rsvd. - * INTERSIL_IF: Intersil if calibration pin. - */ -#define MACCSR1 0x00e4 -#define MACCSR1_KICK_RX FIELD32(0x00000001) -#define MACCSR1_ONESHOT_RXMODE FIELD32(0x00000002) -#define MACCSR1_BBPRX_RESET_MODE FIELD32(0x00000004) -#define MACCSR1_AUTO_TXBBP FIELD32(0x00000008) -#define MACCSR1_AUTO_RXBBP FIELD32(0x00000010) -#define MACCSR1_LOOPBACK FIELD32(0x00000060) -#define MACCSR1_INTERSIL_IF FIELD32(0x00000080) - -/* - * RALINKCSR: Ralink Rx auto-reset BBCR. - * AR_BBP_DATA#: Auto reset BBP register # data. - * AR_BBP_ID#: Auto reset BBP register # id. - */ -#define RALINKCSR 0x00e8 -#define RALINKCSR_AR_BBP_DATA0 FIELD32(0x000000ff) -#define RALINKCSR_AR_BBP_ID0 FIELD32(0x00007f00) -#define RALINKCSR_AR_BBP_VALID0 FIELD32(0x00008000) -#define RALINKCSR_AR_BBP_DATA1 FIELD32(0x00ff0000) -#define RALINKCSR_AR_BBP_ID1 FIELD32(0x7f000000) -#define RALINKCSR_AR_BBP_VALID1 FIELD32(0x80000000) - -/* - * BCNCSR: Beacon interval control register. - * CHANGE: Write one to change beacon interval. - * DELTATIME: The delta time value. - * NUM_BEACON: Number of beacon according to mode. - * MODE: Please refer to asic specs. - * PLUS: Plus or minus delta time value. - */ -#define BCNCSR 0x00ec -#define BCNCSR_CHANGE FIELD32(0x00000001) -#define BCNCSR_DELTATIME FIELD32(0x0000001e) -#define BCNCSR_NUM_BEACON FIELD32(0x00001fe0) -#define BCNCSR_MODE FIELD32(0x00006000) -#define BCNCSR_PLUS FIELD32(0x00008000) - -/* - * BBP / RF / IF Control Register. - */ - -/* - * BBPCSR: BBP serial control register. - * VALUE: Register value to program into BBP. - * REGNUM: Selected BBP register. - * BUSY: 1: asic is busy execute BBP programming. - * WRITE_CONTROL: 1: write BBP, 0: read BBP. - */ -#define BBPCSR 0x00f0 -#define BBPCSR_VALUE FIELD32(0x000000ff) -#define BBPCSR_REGNUM FIELD32(0x00007f00) -#define BBPCSR_BUSY FIELD32(0x00008000) -#define BBPCSR_WRITE_CONTROL FIELD32(0x00010000) - -/* - * RFCSR: RF serial control register. - * VALUE: Register value + id to program into rf/if. - * NUMBER_OF_BITS: Number of bits used in value (i:20, rfmd:22). - * IF_SELECT: Chip to program: 0: rf, 1: if. - * PLL_LD: Rf pll_ld status. - * BUSY: 1: asic is busy execute rf programming. - */ -#define RFCSR 0x00f4 -#define RFCSR_VALUE FIELD32(0x00ffffff) -#define RFCSR_NUMBER_OF_BITS FIELD32(0x1f000000) -#define RFCSR_IF_SELECT FIELD32(0x20000000) -#define RFCSR_PLL_LD FIELD32(0x40000000) -#define RFCSR_BUSY FIELD32(0x80000000) - -/* - * LEDCSR: LED control register. - * ON_PERIOD: On period, default 70ms. - * OFF_PERIOD: Off period, default 30ms. - * LINK: 0: linkoff, 1: linkup. - * ACTIVITY: 0: idle, 1: active. - * LINK_POLARITY: 0: active low, 1: active high. - * ACTIVITY_POLARITY: 0: active low, 1: active high. - * LED_DEFAULT: LED state for "enable" 0: ON, 1: OFF. - */ -#define LEDCSR 0x00f8 -#define LEDCSR_ON_PERIOD FIELD32(0x000000ff) -#define LEDCSR_OFF_PERIOD FIELD32(0x0000ff00) -#define LEDCSR_LINK FIELD32(0x00010000) -#define LEDCSR_ACTIVITY FIELD32(0x00020000) -#define LEDCSR_LINK_POLARITY FIELD32(0x00040000) -#define LEDCSR_ACTIVITY_POLARITY FIELD32(0x00080000) -#define LEDCSR_LED_DEFAULT FIELD32(0x00100000) - -/* - * AES control register. - */ -#define SECCSR3 0x00fc - -/* - * ASIC pointer information. - * RXPTR: Current RX ring address. - * TXPTR: Current Tx ring address. - * PRIPTR: Current Priority ring address. - * ATIMPTR: Current ATIM ring address. - */ -#define RXPTR 0x0100 -#define TXPTR 0x0104 -#define PRIPTR 0x0108 -#define ATIMPTR 0x010c - -/* - * TXACKCSR0: TX ACK timeout. - */ -#define TXACKCSR0 0x0110 - -/* - * ACK timeout count registers. - * ACKCNT0: TX ACK timeout count. - * ACKCNT1: RX ACK timeout count. - */ -#define ACKCNT0 0x0114 -#define ACKCNT1 0x0118 - -/* - * GPIO and others. - */ - -/* - * GPIOCSR: GPIO control register. - */ -#define GPIOCSR 0x0120 -#define GPIOCSR_BIT0 FIELD32(0x00000001) -#define GPIOCSR_BIT1 FIELD32(0x00000002) -#define GPIOCSR_BIT2 FIELD32(0x00000004) -#define GPIOCSR_BIT3 FIELD32(0x00000008) -#define GPIOCSR_BIT4 FIELD32(0x00000010) -#define GPIOCSR_BIT5 FIELD32(0x00000020) -#define GPIOCSR_BIT6 FIELD32(0x00000040) -#define GPIOCSR_BIT7 FIELD32(0x00000080) -#define GPIOCSR_DIR0 FIELD32(0x00000100) -#define GPIOCSR_DIR1 FIELD32(0x00000200) -#define GPIOCSR_DIR2 FIELD32(0x00000400) -#define GPIOCSR_DIR3 FIELD32(0x00000800) -#define GPIOCSR_DIR4 FIELD32(0x00001000) -#define GPIOCSR_DIR5 FIELD32(0x00002000) -#define GPIOCSR_DIR6 FIELD32(0x00004000) -#define GPIOCSR_DIR7 FIELD32(0x00008000) - -/* - * FIFO pointer registers. - * FIFOCSR0: TX FIFO pointer. - * FIFOCSR1: RX FIFO pointer. - */ -#define FIFOCSR0 0x0128 -#define FIFOCSR1 0x012c - -/* - * BCNCSR1: Tx BEACON offset time control register. - * PRELOAD: Beacon timer offset in units of usec. - * BEACON_CWMIN: 2^CwMin. - */ -#define BCNCSR1 0x0130 -#define BCNCSR1_PRELOAD FIELD32(0x0000ffff) -#define BCNCSR1_BEACON_CWMIN FIELD32(0x000f0000) - -/* - * MACCSR2: TX_PE to RX_PE turn-around time control register - * DELAY: RX_PE low width, in units of pci clock cycle. - */ -#define MACCSR2 0x0134 -#define MACCSR2_DELAY FIELD32(0x000000ff) - -/* - * TESTCSR: TEST mode selection register. - */ -#define TESTCSR 0x0138 - -/* - * ARCSR2: 1 Mbps ACK/CTS PLCP. - */ -#define ARCSR2 0x013c -#define ARCSR2_SIGNAL FIELD32(0x000000ff) -#define ARCSR2_SERVICE FIELD32(0x0000ff00) -#define ARCSR2_LENGTH FIELD32(0xffff0000) - -/* - * ARCSR3: 2 Mbps ACK/CTS PLCP. - */ -#define ARCSR3 0x0140 -#define ARCSR3_SIGNAL FIELD32(0x000000ff) -#define ARCSR3_SERVICE FIELD32(0x0000ff00) -#define ARCSR3_LENGTH FIELD32(0xffff0000) - -/* - * ARCSR4: 5.5 Mbps ACK/CTS PLCP. - */ -#define ARCSR4 0x0144 -#define ARCSR4_SIGNAL FIELD32(0x000000ff) -#define ARCSR4_SERVICE FIELD32(0x0000ff00) -#define ARCSR4_LENGTH FIELD32(0xffff0000) - -/* - * ARCSR5: 11 Mbps ACK/CTS PLCP. - */ -#define ARCSR5 0x0148 -#define ARCSR5_SIGNAL FIELD32(0x000000ff) -#define ARCSR5_SERVICE FIELD32(0x0000ff00) -#define ARCSR5_LENGTH FIELD32(0xffff0000) - -/* - * ARTCSR0: CCK ACK/CTS payload consumed time for 1/2/5.5/11 mbps. - */ -#define ARTCSR0 0x014c -#define ARTCSR0_ACK_CTS_11MBS FIELD32(0x000000ff) -#define ARTCSR0_ACK_CTS_5_5MBS FIELD32(0x0000ff00) -#define ARTCSR0_ACK_CTS_2MBS FIELD32(0x00ff0000) -#define ARTCSR0_ACK_CTS_1MBS FIELD32(0xff000000) - - -/* - * ARTCSR1: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps. - */ -#define ARTCSR1 0x0150 -#define ARTCSR1_ACK_CTS_6MBS FIELD32(0x000000ff) -#define ARTCSR1_ACK_CTS_9MBS FIELD32(0x0000ff00) -#define ARTCSR1_ACK_CTS_12MBS FIELD32(0x00ff0000) -#define ARTCSR1_ACK_CTS_18MBS FIELD32(0xff000000) - -/* - * ARTCSR2: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps. - */ -#define ARTCSR2 0x0154 -#define ARTCSR2_ACK_CTS_24MBS FIELD32(0x000000ff) -#define ARTCSR2_ACK_CTS_36MBS FIELD32(0x0000ff00) -#define ARTCSR2_ACK_CTS_48MBS FIELD32(0x00ff0000) -#define ARTCSR2_ACK_CTS_54MBS FIELD32(0xff000000) - -/* - * SECCSR1_RT2509: WEP control register. - * KICK_ENCRYPT: Kick encryption engine, self-clear. - * ONE_SHOT: 0: ring mode, 1: One shot only mode. - * DESC_ADDRESS: Descriptor physical address of frame. - */ -#define SECCSR1 0x0158 -#define SECCSR1_KICK_ENCRYPT FIELD32(0x00000001) -#define SECCSR1_ONE_SHOT FIELD32(0x00000002) -#define SECCSR1_DESC_ADDRESS FIELD32(0xfffffffc) - -/* - * BBPCSR1: BBP TX configuration. - */ -#define BBPCSR1 0x015c -#define BBPCSR1_CCK FIELD32(0x00000003) -#define BBPCSR1_CCK_FLIP FIELD32(0x00000004) -#define BBPCSR1_OFDM FIELD32(0x00030000) -#define BBPCSR1_OFDM_FLIP FIELD32(0x00040000) - -/* - * Dual band configuration registers. - * DBANDCSR0: Dual band configuration register 0. - * DBANDCSR1: Dual band configuration register 1. - */ -#define DBANDCSR0 0x0160 -#define DBANDCSR1 0x0164 - -/* - * BBPPCSR: BBP Pin control register. - */ -#define BBPPCSR 0x0168 - -/* - * MAC special debug mode selection registers. - * DBGSEL0: MAC special debug mode selection register 0. - * DBGSEL1: MAC special debug mode selection register 1. - */ -#define DBGSEL0 0x016c -#define DBGSEL1 0x0170 - -/* - * BISTCSR: BBP BIST register. - */ -#define BISTCSR 0x0174 - -/* - * Multicast filter registers. - * MCAST0: Multicast filter register 0. - * MCAST1: Multicast filter register 1. - */ -#define MCAST0 0x0178 -#define MCAST1 0x017c - -/* - * UART registers. - * UARTCSR0: UART1 TX register. - * UARTCSR1: UART1 RX register. - * UARTCSR3: UART1 frame control register. - * UARTCSR4: UART1 buffer control register. - * UART2CSR0: UART2 TX register. - * UART2CSR1: UART2 RX register. - * UART2CSR3: UART2 frame control register. - * UART2CSR4: UART2 buffer control register. - */ -#define UARTCSR0 0x0180 -#define UARTCSR1 0x0184 -#define UARTCSR3 0x0188 -#define UARTCSR4 0x018c -#define UART2CSR0 0x0190 -#define UART2CSR1 0x0194 -#define UART2CSR3 0x0198 -#define UART2CSR4 0x019c - -/* - * BBP registers. - * The wordsize of the BBP is 8 bits. - */ - -/* - * R2: TX antenna control - */ -#define BBP_R2_TX_ANTENNA FIELD8(0x03) -#define BBP_R2_TX_IQ_FLIP FIELD8(0x04) - -/* - * R14: RX antenna control - */ -#define BBP_R14_RX_ANTENNA FIELD8(0x03) -#define BBP_R14_RX_IQ_FLIP FIELD8(0x04) - -/* - * BBP_R70 - */ -#define BBP_R70_JAPAN_FILTER FIELD8(0x08) - -/* - * RF registers - */ - -/* - * RF 1 - */ -#define RF1_TUNER FIELD32(0x00020000) - -/* - * RF 3 - */ -#define RF3_TUNER FIELD32(0x00000100) -#define RF3_TXPOWER FIELD32(0x00003e00) - -/* - * EEPROM content. - * The wordsize of the EEPROM is 16 bits. - */ - -/* - * HW MAC address. - */ -#define EEPROM_MAC_ADDR_0 0x0002 -#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) -#define EEPROM_MAC_ADDR1 0x0003 -#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) -#define EEPROM_MAC_ADDR_2 0x0004 -#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) - -/* - * EEPROM antenna. - * ANTENNA_NUM: Number of antenna's. - * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * LED_MODE: 0: default, 1: TX/RX activity,2: Single (ignore link), 3: rsvd. - * DYN_TXAGC: Dynamic TX AGC control. - * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0. - * RF_TYPE: Rf_type of this adapter. - */ -#define EEPROM_ANTENNA 0x10 -#define EEPROM_ANTENNA_NUM FIELD16(0x0003) -#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c) -#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030) -#define EEPROM_ANTENNA_LED_MODE FIELD16(0x01c0) -#define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200) -#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400) -#define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800) - -/* - * EEPROM NIC config. - * CARDBUS_ACCEL: 0: enable, 1: disable. - * DYN_BBP_TUNE: 0: enable, 1: disable. - * CCK_TX_POWER: CCK TX power compensation. - */ -#define EEPROM_NIC 0x11 -#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0001) -#define EEPROM_NIC_DYN_BBP_TUNE FIELD16(0x0002) -#define EEPROM_NIC_CCK_TX_POWER FIELD16(0x000c) - -/* - * EEPROM geography. - * GEO: Default geography setting for device. - */ -#define EEPROM_GEOGRAPHY 0x12 -#define EEPROM_GEOGRAPHY_GEO FIELD16(0x0f00) - -/* - * EEPROM BBP. - */ -#define EEPROM_BBP_START 0x13 -#define EEPROM_BBP_SIZE 16 -#define EEPROM_BBP_VALUE FIELD16(0x00ff) -#define EEPROM_BBP_REG_ID FIELD16(0xff00) - -/* - * EEPROM TXPOWER - */ -#define EEPROM_TXPOWER_START 0x23 -#define EEPROM_TXPOWER_SIZE 7 -#define EEPROM_TXPOWER_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_2 FIELD16(0xff00) - -/* - * RSSI <-> dBm offset calibration - */ -#define EEPROM_CALIBRATE_OFFSET 0x3e -#define EEPROM_CALIBRATE_OFFSET_RSSI FIELD16(0x00ff) - -/* - * DMA descriptor defines. - */ -#define TXD_DESC_SIZE ( 11 * sizeof(struct data_desc) ) -#define RXD_DESC_SIZE ( 11 * sizeof(struct data_desc) ) - -/* - * TX descriptor format for TX, PRIO, ATIM and Beacon Ring. - */ - -/* - * Word0 - */ -#define TXD_W0_OWNER_NIC FIELD32(0x00000001) -#define TXD_W0_VALID FIELD32(0x00000002) -#define TXD_W0_RESULT FIELD32(0x0000001c) -#define TXD_W0_RETRY_COUNT FIELD32(0x000000e0) -#define TXD_W0_MORE_FRAG FIELD32(0x00000100) -#define TXD_W0_ACK FIELD32(0x00000200) -#define TXD_W0_TIMESTAMP FIELD32(0x00000400) -#define TXD_W0_OFDM FIELD32(0x00000800) -#define TXD_W0_CIPHER_OWNER FIELD32(0x00001000) -#define TXD_W0_IFS FIELD32(0x00006000) -#define TXD_W0_RETRY_MODE FIELD32(0x00008000) -#define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) -#define TXD_W0_CIPHER_ALG FIELD32(0xe0000000) - -/* - * Word1 - */ -#define TXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff) - -/* - * Word2 - */ -#define TXD_W2_IV_OFFSET FIELD32(0x0000003f) -#define TXD_W2_AIFS FIELD32(0x000000c0) -#define TXD_W2_CWMIN FIELD32(0x00000f00) -#define TXD_W2_CWMAX FIELD32(0x0000f000) - -/* - * Word3: PLCP information - */ -#define TXD_W3_PLCP_SIGNAL FIELD32(0x000000ff) -#define TXD_W3_PLCP_SERVICE FIELD32(0x0000ff00) -#define TXD_W3_PLCP_LENGTH_LOW FIELD32(0x00ff0000) -#define TXD_W3_PLCP_LENGTH_HIGH FIELD32(0xff000000) - -/* - * Word4 - */ -#define TXD_W4_IV FIELD32(0xffffffff) - -/* - * Word5 - */ -#define TXD_W5_EIV FIELD32(0xffffffff) - -/* - * Word6-9: Key - */ -#define TXD_W6_KEY FIELD32(0xffffffff) -#define TXD_W7_KEY FIELD32(0xffffffff) -#define TXD_W8_KEY FIELD32(0xffffffff) -#define TXD_W9_KEY FIELD32(0xffffffff) - -/* - * Word10 - */ -#define TXD_W10_RTS FIELD32(0x00000001) -#define TXD_W10_TX_RATE FIELD32(0x000000fe) - -/* - * RX descriptor format for RX Ring. - */ - -/* - * Word0 - */ -#define RXD_W0_OWNER_NIC FIELD32(0x00000001) -#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000002) -#define RXD_W0_MULTICAST FIELD32(0x00000004) -#define RXD_W0_BROADCAST FIELD32(0x00000008) -#define RXD_W0_MY_BSS FIELD32(0x00000010) -#define RXD_W0_CRC_ERROR FIELD32(0x00000020) -#define RXD_W0_OFDM FIELD32(0x00000040) -#define RXD_W0_PHYSICAL_ERROR FIELD32(0x00000080) -#define RXD_W0_CIPHER_OWNER FIELD32(0x00000100) -#define RXD_W0_ICV_ERROR FIELD32(0x00000200) -#define RXD_W0_IV_OFFSET FIELD32(0x0000fc00) -#define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) -#define RXD_W0_CIPHER_ALG FIELD32(0xe0000000) - -/* - * Word1 - */ -#define RXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff) - -/* - * Word2 - */ -#define RXD_W2_SIGNAL FIELD32(0x000000ff) -#define RXD_W2_RSSI FIELD32(0x0000ff00) -#define RXD_W2_TA FIELD32(0xffff0000) - -/* - * Word3 - */ -#define RXD_W3_TA FIELD32(0xffffffff) - -/* - * Word4 - */ -#define RXD_W4_IV FIELD32(0xffffffff) - -/* - * Word5 - */ -#define RXD_W5_EIV FIELD32(0xffffffff) - -/* - * Word6-9: Key - */ -#define RXD_W6_KEY FIELD32(0xffffffff) -#define RXD_W7_KEY FIELD32(0xffffffff) -#define RXD_W8_KEY FIELD32(0xffffffff) -#define RXD_W9_KEY FIELD32(0xffffffff) - -/* - * Word10 - */ -#define RXD_W10_DROP FIELD32(0x00000001) - -/* - * Macro's for converting txpower from EEPROM to dscape value - * and from dscape value to register value. - */ -#define MIN_TXPOWER 0 -#define MAX_TXPOWER 31 -#define DEFAULT_TXPOWER 24 - -#define TXPOWER_FROM_DEV(__txpower) \ -({ \ - ((__txpower) > MAX_TXPOWER) ? \ - DEFAULT_TXPOWER : (__txpower); \ -}) - -#define TXPOWER_TO_DEV(__txpower) \ -({ \ - ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \ - (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \ - (__txpower)); \ -}) - -#endif /* RT2500PCI_H */ diff --git a/package/rt2x00/src/rt2500usb.c b/package/rt2x00/src/rt2500usb.c deleted file mode 100644 index 18b1f914538..00000000000 --- a/package/rt2x00/src/rt2500usb.c +++ /dev/null @@ -1,1831 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2500usb - Abstract: rt2500usb device specific routines. - Supported chipsets: RT2570. - */ - -/* - * Set enviroment defines for rt2x00.h - */ -#define DRV_NAME "rt2500usb" - -#include -#include -#include -#include -#include -#include - -#include "rt2x00.h" -#include "rt2x00usb.h" -#include "rt2500usb.h" - -/* - * Register access. - * All access to the CSR registers will go through the methods - * rt2500usb_register_read and rt2500usb_register_write. - * BBP and RF register require indirect register access, - * and use the CSR registers BBPCSR and RFCSR to achieve this. - * These indirect registers work with busy bits, - * and we will try maximal REGISTER_BUSY_COUNT times to access - * the register while taking a REGISTER_BUSY_DELAY us delay - * between each attampt. When the busy bit is still set at that time, - * the access attempt is considered to have failed, - * and we will print an error. - */ -static inline void rt2500usb_register_read(const struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u16 *value) -{ - __le16 reg; - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, - USB_VENDOR_REQUEST_IN, offset, - ®, sizeof(u16), REGISTER_TIMEOUT); - *value = le16_to_cpu(reg); -} - -static inline void rt2500usb_register_multiread(const struct rt2x00_dev - *rt2x00dev, - const unsigned int offset, - void *value, const u16 length) -{ - int timeout = REGISTER_TIMEOUT * (length / sizeof(u16)); - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, - USB_VENDOR_REQUEST_IN, offset, - value, length, timeout); -} - -static inline void rt2500usb_register_write(const struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u16 value) -{ - __le16 reg = cpu_to_le16(value); - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, offset, - ®, sizeof(u16), REGISTER_TIMEOUT); -} - -static inline void rt2500usb_register_multiwrite(const struct rt2x00_dev - *rt2x00dev, - const unsigned int offset, - void *value, const u16 length) -{ - int timeout = REGISTER_TIMEOUT * (length / sizeof(u16)); - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, offset, - value, length, timeout); -} - -static u16 rt2500usb_bbp_check(const struct rt2x00_dev *rt2x00dev) -{ - u16 reg; - unsigned int i; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2500usb_register_read(rt2x00dev, PHY_CSR8, ®); - if (!rt2x00_get_field16(reg, PHY_CSR8_BUSY)) - break; - udelay(REGISTER_BUSY_DELAY); - } - - return reg; -} - -static void rt2500usb_bbp_write(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u8 value) -{ - u16 reg; - - /* - * Wait until the BBP becomes ready. - */ - reg = rt2500usb_bbp_check(rt2x00dev); - if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n"); - return; - } - - /* - * Write the data into the BBP. - */ - reg = 0; - rt2x00_set_field16(®, PHY_CSR7_DATA, value); - rt2x00_set_field16(®, PHY_CSR7_REG_ID, word); - rt2x00_set_field16(®, PHY_CSR7_READ_CONTROL, 0); - - rt2500usb_register_write(rt2x00dev, PHY_CSR7, reg); -} - -static void rt2500usb_bbp_read(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, u8 *value) -{ - u16 reg; - - /* - * Wait until the BBP becomes ready. - */ - reg = rt2500usb_bbp_check(rt2x00dev); - if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n"); - return; - } - - /* - * Write the request into the BBP. - */ - reg = 0; - rt2x00_set_field16(®, PHY_CSR7_REG_ID, word); - rt2x00_set_field16(®, PHY_CSR7_READ_CONTROL, 1); - - rt2500usb_register_write(rt2x00dev, PHY_CSR7, reg); - - /* - * Wait until the BBP becomes ready. - */ - reg = rt2500usb_bbp_check(rt2x00dev); - if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n"); - *value = 0xff; - return; - } - - rt2500usb_register_read(rt2x00dev, PHY_CSR7, ®); - *value = rt2x00_get_field16(reg, PHY_CSR7_DATA); -} - -static void rt2500usb_rf_write(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u32 value) -{ - u16 reg; - unsigned int i; - - if (!word) - return; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2500usb_register_read(rt2x00dev, PHY_CSR10, ®); - if (!rt2x00_get_field16(reg, PHY_CSR10_RF_BUSY)) - goto rf_write; - udelay(REGISTER_BUSY_DELAY); - } - - ERROR(rt2x00dev, "PHY_CSR10 register busy. Write failed.\n"); - return; - -rf_write: - reg = 0; - rt2x00_set_field16(®, PHY_CSR9_RF_VALUE, value); - rt2500usb_register_write(rt2x00dev, PHY_CSR9, reg); - - reg = 0; - rt2x00_set_field16(®, PHY_CSR10_RF_VALUE, value >> 16); - rt2x00_set_field16(®, PHY_CSR10_RF_NUMBER_OF_BITS, 20); - rt2x00_set_field16(®, PHY_CSR10_RF_IF_SELECT, 0); - rt2x00_set_field16(®, PHY_CSR10_RF_BUSY, 1); - - rt2500usb_register_write(rt2x00dev, PHY_CSR10, reg); - rt2x00_rf_write(rt2x00dev, word, value); -} - -#ifdef CONFIG_RT2X00_LIB_DEBUGFS -#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u16)) ) - -static void rt2500usb_read_csr(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 *data) -{ - rt2500usb_register_read(rt2x00dev, CSR_OFFSET(word), (u16 *) data); -} - -static void rt2500usb_write_csr(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 data) -{ - rt2500usb_register_write(rt2x00dev, CSR_OFFSET(word), data); -} - -static const struct rt2x00debug rt2500usb_rt2x00debug = { - .owner = THIS_MODULE, - .csr = { - .read = rt2500usb_read_csr, - .write = rt2500usb_write_csr, - .word_size = sizeof(u16), - .word_count = CSR_REG_SIZE / sizeof(u16), - }, - .eeprom = { - .read = rt2x00_eeprom_read, - .write = rt2x00_eeprom_write, - .word_size = sizeof(u16), - .word_count = EEPROM_SIZE / sizeof(u16), - }, - .bbp = { - .read = rt2500usb_bbp_read, - .write = rt2500usb_bbp_write, - .word_size = sizeof(u8), - .word_count = BBP_SIZE / sizeof(u8), - }, - .rf = { - .read = rt2x00_rf_read, - .write = rt2500usb_rf_write, - .word_size = sizeof(u32), - .word_count = RF_SIZE / sizeof(u32), - }, -}; -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ - -/* - * Configuration handlers. - */ -static void rt2500usb_config_mac_addr(struct rt2x00_dev *rt2x00dev, - __le32 *mac) -{ - rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR2, mac, - (3 * sizeof(__le16))); -} - -static void rt2500usb_config_bssid(struct rt2x00_dev *rt2x00dev, - __le32 *bssid) -{ - rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR5, bssid, - (3 * sizeof(__le16))); -} - -static void rt2500usb_config_type(struct rt2x00_dev *rt2x00dev, const int type, - const int tsf_sync) -{ - u16 reg; - - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0); - - /* - * Enable beacon config - */ - rt2500usb_register_read(rt2x00dev, TXRX_CSR20, ®); - rt2x00_set_field16(®, TXRX_CSR20_OFFSET, - (PREAMBLE + get_duration(IEEE80211_HEADER, 20)) >> 6); - if (type == IEEE80211_IF_TYPE_STA) - rt2x00_set_field16(®, TXRX_CSR20_BCN_EXPECT_WINDOW, 0); - else - rt2x00_set_field16(®, TXRX_CSR20_BCN_EXPECT_WINDOW, 2); - rt2500usb_register_write(rt2x00dev, TXRX_CSR20, reg); - - /* - * Enable synchronisation. - */ - rt2500usb_register_read(rt2x00dev, TXRX_CSR18, ®); - rt2x00_set_field16(®, TXRX_CSR18_OFFSET, 0); - rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg); - - rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®); - rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 1); - rt2x00_set_field16(®, TXRX_CSR19_TBCN, 1); - rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 0); - rt2x00_set_field16(®, TXRX_CSR19_TSF_SYNC, tsf_sync); - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); -} - -static void rt2500usb_config_preamble(struct rt2x00_dev *rt2x00dev, - const int short_preamble, - const int ack_timeout, - const int ack_consume_time) -{ - u16 reg; - - /* - * When in atomic context, reschedule and let rt2x00lib - * call this function again. - */ - if (in_atomic()) { - queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->config_work); - return; - } - - rt2500usb_register_read(rt2x00dev, TXRX_CSR1, ®); - rt2x00_set_field16(®, TXRX_CSR1_ACK_TIMEOUT, ack_timeout); - rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg); - - rt2500usb_register_read(rt2x00dev, TXRX_CSR10, ®); - rt2x00_set_field16(®, TXRX_CSR10_AUTORESPOND_PREAMBLE, - !!short_preamble); - rt2500usb_register_write(rt2x00dev, TXRX_CSR10, reg); -} - -static void rt2500usb_config_phymode(struct rt2x00_dev *rt2x00dev, - const int phymode, - const int basic_rate_mask) -{ - rt2500usb_register_write(rt2x00dev, TXRX_CSR11, basic_rate_mask); - - if (phymode == HWMODE_B) { - rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x000b); - rt2500usb_register_write(rt2x00dev, MAC_CSR12, 0x0040); - } else { - rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0005); - rt2500usb_register_write(rt2x00dev, MAC_CSR12, 0x016c); - } -} - -static void rt2500usb_config_channel(struct rt2x00_dev *rt2x00dev, - struct rf_channel *rf, const int txpower) -{ - /* - * Set TXpower. - */ - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); - - /* - * For RT2525E we should first set the channel to half band higher. - */ - if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) { - static const u32 vals[] = { - 0x000008aa, 0x000008ae, 0x000008ae, 0x000008b2, - 0x000008b2, 0x000008b6, 0x000008b6, 0x000008ba, - 0x000008ba, 0x000008be, 0x000008b7, 0x00000902, - 0x00000902, 0x00000906 - }; - - rt2500usb_rf_write(rt2x00dev, 2, vals[rf->channel - 1]); - if (rf->rf4) - rt2500usb_rf_write(rt2x00dev, 4, rf->rf4); - } - - rt2500usb_rf_write(rt2x00dev, 1, rf->rf1); - rt2500usb_rf_write(rt2x00dev, 2, rf->rf2); - rt2500usb_rf_write(rt2x00dev, 3, rf->rf3); - if (rf->rf4) - rt2500usb_rf_write(rt2x00dev, 4, rf->rf4); -} - -static void rt2500usb_config_txpower(struct rt2x00_dev *rt2x00dev, - const int txpower) -{ - u32 rf3; - - rt2x00_rf_read(rt2x00dev, 3, &rf3); - rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); - rt2500usb_rf_write(rt2x00dev, 3, rf3); -} - -static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev, - const int antenna_tx, const int antenna_rx) -{ - u8 r2; - u8 r14; - u16 csr5; - u16 csr6; - - rt2500usb_bbp_read(rt2x00dev, 2, &r2); - rt2500usb_bbp_read(rt2x00dev, 14, &r14); - rt2500usb_register_read(rt2x00dev, PHY_CSR5, &csr5); - rt2500usb_register_read(rt2x00dev, PHY_CSR6, &csr6); - - /* - * Configure the TX antenna. - */ - switch (antenna_tx) { - case ANTENNA_SW_DIVERSITY: - case ANTENNA_HW_DIVERSITY: - rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 1); - rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 1); - rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 1); - break; - case ANTENNA_A: - rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0); - rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 0); - rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 0); - break; - case ANTENNA_B: - rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2); - rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 2); - rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 2); - break; - } - - /* - * Configure the RX antenna. - */ - switch (antenna_rx) { - case ANTENNA_SW_DIVERSITY: - case ANTENNA_HW_DIVERSITY: - rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 1); - break; - case ANTENNA_A: - rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0); - break; - case ANTENNA_B: - rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2); - break; - } - - /* - * RT2525E and RT5222 need to flip TX I/Q - */ - if (rt2x00_rf(&rt2x00dev->chip, RF2525E) || - rt2x00_rf(&rt2x00dev->chip, RF5222)) { - rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1); - rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 1); - rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 1); - - /* - * RT2525E does not need RX I/Q Flip. - */ - if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) - rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0); - } else { - rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 0); - rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 0); - } - - rt2500usb_bbp_write(rt2x00dev, 2, r2); - rt2500usb_bbp_write(rt2x00dev, 14, r14); - rt2500usb_register_write(rt2x00dev, PHY_CSR5, csr5); - rt2500usb_register_write(rt2x00dev, PHY_CSR6, csr6); -} - -static void rt2500usb_config_duration(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u16 reg; - - rt2500usb_register_write(rt2x00dev, MAC_CSR10, libconf->slot_time); - - rt2500usb_register_read(rt2x00dev, TXRX_CSR18, ®); - rt2x00_set_field16(®, TXRX_CSR18_INTERVAL, - libconf->conf->beacon_int * 4); - rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg); -} - -static void rt2500usb_config(struct rt2x00_dev *rt2x00dev, - const unsigned int flags, - struct rt2x00lib_conf *libconf) -{ - if (flags & CONFIG_UPDATE_PHYMODE) - rt2500usb_config_phymode(rt2x00dev, libconf->phymode, - libconf->basic_rates); - if (flags & CONFIG_UPDATE_CHANNEL) - rt2500usb_config_channel(rt2x00dev, &libconf->rf, - libconf->conf->power_level); - if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL)) - rt2500usb_config_txpower(rt2x00dev, - libconf->conf->power_level); - if (flags & CONFIG_UPDATE_ANTENNA) - rt2500usb_config_antenna(rt2x00dev, - libconf->conf->antenna_sel_tx, - libconf->conf->antenna_sel_rx); - if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT)) - rt2500usb_config_duration(rt2x00dev, libconf); -} - -/* - * LED functions. - */ -static void rt2500usb_enable_led(struct rt2x00_dev *rt2x00dev) -{ - u16 reg; - - rt2500usb_register_read(rt2x00dev, MAC_CSR21, ®); - rt2x00_set_field16(®, MAC_CSR21_ON_PERIOD, 70); - rt2x00_set_field16(®, MAC_CSR21_OFF_PERIOD, 30); - rt2500usb_register_write(rt2x00dev, MAC_CSR21, reg); - - rt2500usb_register_read(rt2x00dev, MAC_CSR20, ®); - - if (rt2x00dev->led_mode == LED_MODE_TXRX_ACTIVITY) { - rt2x00_set_field16(®, MAC_CSR20_LINK, 1); - rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 0); - } else if (rt2x00dev->led_mode == LED_MODE_ASUS) { - rt2x00_set_field16(®, MAC_CSR20_LINK, 0); - rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 1); - } else { - rt2x00_set_field16(®, MAC_CSR20_LINK, 1); - rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 1); - } - - rt2500usb_register_write(rt2x00dev, MAC_CSR20, reg); -} - -static void rt2500usb_disable_led(struct rt2x00_dev *rt2x00dev) -{ - u16 reg; - - rt2500usb_register_read(rt2x00dev, MAC_CSR20, ®); - rt2x00_set_field16(®, MAC_CSR20_LINK, 0); - rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 0); - rt2500usb_register_write(rt2x00dev, MAC_CSR20, reg); -} - -/* - * Link tuning - */ -static void rt2500usb_link_stats(struct rt2x00_dev *rt2x00dev) -{ - u16 reg; - - /* - * Update FCS error count from register. - */ - rt2500usb_register_read(rt2x00dev, STA_CSR0, ®); - rt2x00dev->link.rx_failed = rt2x00_get_field16(reg, STA_CSR0_FCS_ERROR); - - /* - * Update False CCA count from register. - */ - rt2500usb_register_read(rt2x00dev, STA_CSR3, ®); - rt2x00dev->link.false_cca = - rt2x00_get_field16(reg, STA_CSR3_FALSE_CCA_ERROR); -} - -static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev) -{ - u16 eeprom; - u16 value; - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &eeprom); - value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R24_LOW); - rt2500usb_bbp_write(rt2x00dev, 24, value); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &eeprom); - value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R25_LOW); - rt2500usb_bbp_write(rt2x00dev, 25, value); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &eeprom); - value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R61_LOW); - rt2500usb_bbp_write(rt2x00dev, 61, value); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &eeprom); - value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_VGCUPPER); - rt2500usb_bbp_write(rt2x00dev, 17, value); - - rt2x00dev->link.vgc_level = value; -} - -static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev) -{ - int rssi = rt2x00_get_link_rssi(&rt2x00dev->link); - u16 bbp_thresh; - u16 vgc_bound; - u16 sens; - u16 r24; - u16 r25; - u16 r61; - u16 r17_sens; - u8 r17; - u8 up_bound; - u8 low_bound; - - /* - * Determine the BBP tuning threshold and correctly - * set BBP 24, 25 and 61. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &bbp_thresh); - bbp_thresh = rt2x00_get_field16(bbp_thresh, EEPROM_BBPTUNE_THRESHOLD); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &r24); - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &r25); - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &r61); - - if ((rssi + bbp_thresh) > 0) { - r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_HIGH); - r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_HIGH); - r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_HIGH); - } else { - r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_LOW); - r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_LOW); - r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_LOW); - } - - rt2500usb_bbp_write(rt2x00dev, 24, r24); - rt2500usb_bbp_write(rt2x00dev, 25, r25); - rt2500usb_bbp_write(rt2x00dev, 61, r61); - - /* - * Read current r17 value, as well as the sensitivity values - * for the r17 register. - */ - rt2500usb_bbp_read(rt2x00dev, 17, &r17); - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &r17_sens); - - /* - * A too low RSSI will cause too much false CCA which will - * then corrupt the R17 tuning. To remidy this the tuning should - * be stopped (While making sure the R17 value will not exceed limits) - */ - if (rssi >= -40) { - if (r17 != 0x60) - rt2500usb_bbp_write(rt2x00dev, 17, 0x60); - return; - } - - /* - * Special big-R17 for short distance - */ - if (rssi >= -58) { - sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_LOW); - if (r17 != sens) - rt2500usb_bbp_write(rt2x00dev, 17, sens); - return; - } - - /* - * Special mid-R17 for middle distance - */ - if (rssi >= -74) { - sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_HIGH); - if (r17 != sens) - rt2500usb_bbp_write(rt2x00dev, 17, sens); - return; - } - - /* - * Leave short or middle distance condition, restore r17 - * to the dynamic tuning range. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &vgc_bound); - vgc_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCUPPER); - - low_bound = 0x32; - if (rssi >= -77) - up_bound = vgc_bound; - else - up_bound = vgc_bound - (-77 - rssi); - - if (up_bound < low_bound) - up_bound = low_bound; - - if (r17 > up_bound) { - rt2500usb_bbp_write(rt2x00dev, 17, up_bound); - rt2x00dev->link.vgc_level = up_bound; - } else if (rt2x00dev->link.false_cca > 512 && r17 < up_bound) { - rt2500usb_bbp_write(rt2x00dev, 17, ++r17); - rt2x00dev->link.vgc_level = r17; - } else if (rt2x00dev->link.false_cca < 100 && r17 > low_bound) { - rt2500usb_bbp_write(rt2x00dev, 17, --r17); - rt2x00dev->link.vgc_level = r17; - } -} - -/* - * Initialization functions. - */ -static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev) -{ - u16 reg; - - rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0x0001, - USB_MODE_TEST, REGISTER_TIMEOUT); - rt2x00usb_vendor_request_sw(rt2x00dev, USB_SINGLE_WRITE, 0x0308, - 0x00f0, REGISTER_TIMEOUT); - - rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®); - rt2x00_set_field16(®, TXRX_CSR2_DISABLE_RX, 1); - rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg); - - rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x1111); - rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x1e11); - - rt2500usb_register_read(rt2x00dev, MAC_CSR1, ®); - rt2x00_set_field16(®, MAC_CSR1_SOFT_RESET, 1); - rt2x00_set_field16(®, MAC_CSR1_BBP_RESET, 1); - rt2x00_set_field16(®, MAC_CSR1_HOST_READY, 0); - rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg); - - rt2500usb_register_read(rt2x00dev, MAC_CSR1, ®); - rt2x00_set_field16(®, MAC_CSR1_SOFT_RESET, 0); - rt2x00_set_field16(®, MAC_CSR1_BBP_RESET, 0); - rt2x00_set_field16(®, MAC_CSR1_HOST_READY, 0); - rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg); - - rt2500usb_register_read(rt2x00dev, TXRX_CSR5, ®); - rt2x00_set_field16(®, TXRX_CSR5_BBP_ID0, 13); - rt2x00_set_field16(®, TXRX_CSR5_BBP_ID0_VALID, 1); - rt2x00_set_field16(®, TXRX_CSR5_BBP_ID1, 12); - rt2x00_set_field16(®, TXRX_CSR5_BBP_ID1_VALID, 1); - rt2500usb_register_write(rt2x00dev, TXRX_CSR5, reg); - - rt2500usb_register_read(rt2x00dev, TXRX_CSR6, ®); - rt2x00_set_field16(®, TXRX_CSR6_BBP_ID0, 10); - rt2x00_set_field16(®, TXRX_CSR6_BBP_ID0_VALID, 1); - rt2x00_set_field16(®, TXRX_CSR6_BBP_ID1, 11); - rt2x00_set_field16(®, TXRX_CSR6_BBP_ID1_VALID, 1); - rt2500usb_register_write(rt2x00dev, TXRX_CSR6, reg); - - rt2500usb_register_read(rt2x00dev, TXRX_CSR7, ®); - rt2x00_set_field16(®, TXRX_CSR7_BBP_ID0, 7); - rt2x00_set_field16(®, TXRX_CSR7_BBP_ID0_VALID, 1); - rt2x00_set_field16(®, TXRX_CSR7_BBP_ID1, 6); - rt2x00_set_field16(®, TXRX_CSR7_BBP_ID1_VALID, 1); - rt2500usb_register_write(rt2x00dev, TXRX_CSR7, reg); - - rt2500usb_register_read(rt2x00dev, TXRX_CSR8, ®); - rt2x00_set_field16(®, TXRX_CSR8_BBP_ID0, 5); - rt2x00_set_field16(®, TXRX_CSR8_BBP_ID0_VALID, 1); - rt2x00_set_field16(®, TXRX_CSR8_BBP_ID1, 0); - rt2x00_set_field16(®, TXRX_CSR8_BBP_ID1_VALID, 0); - rt2500usb_register_write(rt2x00dev, TXRX_CSR8, reg); - - rt2500usb_register_write(rt2x00dev, TXRX_CSR21, 0xe78f); - rt2500usb_register_write(rt2x00dev, MAC_CSR9, 0xff1d); - - if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) - return -EBUSY; - - rt2500usb_register_read(rt2x00dev, MAC_CSR1, ®); - rt2x00_set_field16(®, MAC_CSR1_SOFT_RESET, 0); - rt2x00_set_field16(®, MAC_CSR1_BBP_RESET, 0); - rt2x00_set_field16(®, MAC_CSR1_HOST_READY, 1); - rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg); - - if (rt2x00_rev(&rt2x00dev->chip) >= RT2570_VERSION_C) { - rt2500usb_register_read(rt2x00dev, PHY_CSR2, ®); - reg &= ~0x0002; - } else { - reg = 0x3002; - } - rt2500usb_register_write(rt2x00dev, PHY_CSR2, reg); - - rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0002); - rt2500usb_register_write(rt2x00dev, MAC_CSR22, 0x0053); - rt2500usb_register_write(rt2x00dev, MAC_CSR15, 0x01ee); - rt2500usb_register_write(rt2x00dev, MAC_CSR16, 0x0000); - - rt2500usb_register_read(rt2x00dev, MAC_CSR8, ®); - rt2x00_set_field16(®, MAC_CSR8_MAX_FRAME_UNIT, - rt2x00dev->rx->data_size); - rt2500usb_register_write(rt2x00dev, MAC_CSR8, reg); - - rt2500usb_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field16(®, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER); - rt2x00_set_field16(®, TXRX_CSR0_KEY_ID, 0xff); - rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg); - - rt2500usb_register_read(rt2x00dev, MAC_CSR18, ®); - rt2x00_set_field16(®, MAC_CSR18_DELAY_AFTER_BEACON, 90); - rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg); - - rt2500usb_register_read(rt2x00dev, PHY_CSR4, ®); - rt2x00_set_field16(®, PHY_CSR4_LOW_RF_LE, 1); - rt2500usb_register_write(rt2x00dev, PHY_CSR4, reg); - - rt2500usb_register_read(rt2x00dev, TXRX_CSR1, ®); - rt2x00_set_field16(®, TXRX_CSR1_AUTO_SEQUENCE, 1); - rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg); - - return 0; -} - -static int rt2500usb_init_bbp(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u16 eeprom; - u8 value; - u8 reg_id; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2500usb_bbp_read(rt2x00dev, 0, &value); - if ((value != 0xff) && (value != 0x00)) - goto continue_csr_init; - NOTICE(rt2x00dev, "Waiting for BBP register.\n"); - udelay(REGISTER_BUSY_DELAY); - } - - ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); - return -EACCES; - -continue_csr_init: - rt2500usb_bbp_write(rt2x00dev, 3, 0x02); - rt2500usb_bbp_write(rt2x00dev, 4, 0x19); - rt2500usb_bbp_write(rt2x00dev, 14, 0x1c); - rt2500usb_bbp_write(rt2x00dev, 15, 0x30); - rt2500usb_bbp_write(rt2x00dev, 16, 0xac); - rt2500usb_bbp_write(rt2x00dev, 18, 0x18); - rt2500usb_bbp_write(rt2x00dev, 19, 0xff); - rt2500usb_bbp_write(rt2x00dev, 20, 0x1e); - rt2500usb_bbp_write(rt2x00dev, 21, 0x08); - rt2500usb_bbp_write(rt2x00dev, 22, 0x08); - rt2500usb_bbp_write(rt2x00dev, 23, 0x08); - rt2500usb_bbp_write(rt2x00dev, 24, 0x80); - rt2500usb_bbp_write(rt2x00dev, 25, 0x50); - rt2500usb_bbp_write(rt2x00dev, 26, 0x08); - rt2500usb_bbp_write(rt2x00dev, 27, 0x23); - rt2500usb_bbp_write(rt2x00dev, 30, 0x10); - rt2500usb_bbp_write(rt2x00dev, 31, 0x2b); - rt2500usb_bbp_write(rt2x00dev, 32, 0xb9); - rt2500usb_bbp_write(rt2x00dev, 34, 0x12); - rt2500usb_bbp_write(rt2x00dev, 35, 0x50); - rt2500usb_bbp_write(rt2x00dev, 39, 0xc4); - rt2500usb_bbp_write(rt2x00dev, 40, 0x02); - rt2500usb_bbp_write(rt2x00dev, 41, 0x60); - rt2500usb_bbp_write(rt2x00dev, 53, 0x10); - rt2500usb_bbp_write(rt2x00dev, 54, 0x18); - rt2500usb_bbp_write(rt2x00dev, 56, 0x08); - rt2500usb_bbp_write(rt2x00dev, 57, 0x10); - rt2500usb_bbp_write(rt2x00dev, 58, 0x08); - rt2500usb_bbp_write(rt2x00dev, 61, 0x60); - rt2500usb_bbp_write(rt2x00dev, 62, 0x10); - rt2500usb_bbp_write(rt2x00dev, 75, 0xff); - - DEBUG(rt2x00dev, "Start initialization from EEPROM...\n"); - for (i = 0; i < EEPROM_BBP_SIZE; i++) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); - - if (eeprom != 0xffff && eeprom != 0x0000) { - reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); - value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); - DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n", - reg_id, value); - rt2500usb_bbp_write(rt2x00dev, reg_id, value); - } - } - DEBUG(rt2x00dev, "...End initialization from EEPROM.\n"); - - return 0; -} - -/* - * Device state switch handlers. - */ -static void rt2500usb_toggle_rx(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - u16 reg; - - rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®); - rt2x00_set_field16(®, TXRX_CSR2_DISABLE_RX, - state == STATE_RADIO_RX_OFF); - rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg); -} - -static int rt2500usb_enable_radio(struct rt2x00_dev *rt2x00dev) -{ - /* - * Initialize all registers. - */ - if (rt2500usb_init_registers(rt2x00dev) || - rt2500usb_init_bbp(rt2x00dev)) { - ERROR(rt2x00dev, "Register initialization failed.\n"); - return -EIO; - } - - rt2x00usb_enable_radio(rt2x00dev); - - /* - * Enable LED - */ - rt2500usb_enable_led(rt2x00dev); - - return 0; -} - -static void rt2500usb_disable_radio(struct rt2x00_dev *rt2x00dev) -{ - /* - * Disable LED - */ - rt2500usb_disable_led(rt2x00dev); - - rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x2121); - rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x2121); - - /* - * Disable synchronisation. - */ - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0); - - rt2x00usb_disable_radio(rt2x00dev); -} - -static int rt2500usb_set_state(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - u16 reg; - u16 reg2; - unsigned int i; - char put_to_sleep; - char bbp_state; - char rf_state; - - put_to_sleep = (state != STATE_AWAKE); - - reg = 0; - rt2x00_set_field16(®, MAC_CSR17_BBP_DESIRE_STATE, state); - rt2x00_set_field16(®, MAC_CSR17_RF_DESIRE_STATE, state); - rt2x00_set_field16(®, MAC_CSR17_PUT_TO_SLEEP, put_to_sleep); - rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg); - rt2x00_set_field16(®, MAC_CSR17_SET_STATE, 1); - rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg); - - /* - * Device is not guaranteed to be in the requested state yet. - * We must wait until the register indicates that the - * device has entered the correct state. - */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2500usb_register_read(rt2x00dev, MAC_CSR17, ®2); - bbp_state = rt2x00_get_field16(reg2, MAC_CSR17_BBP_CURR_STATE); - rf_state = rt2x00_get_field16(reg2, MAC_CSR17_RF_CURR_STATE); - if (bbp_state == state && rf_state == state) - return 0; - rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg); - msleep(30); - } - - NOTICE(rt2x00dev, "Device failed to enter state %d, " - "current device state: bbp %d and rf %d.\n", - state, bbp_state, rf_state); - - return -EBUSY; -} - -static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - int retval = 0; - - switch (state) { - case STATE_RADIO_ON: - retval = rt2500usb_enable_radio(rt2x00dev); - break; - case STATE_RADIO_OFF: - rt2500usb_disable_radio(rt2x00dev); - break; - case STATE_RADIO_RX_ON: - case STATE_RADIO_RX_OFF: - rt2500usb_toggle_rx(rt2x00dev, state); - break; - case STATE_DEEP_SLEEP: - case STATE_SLEEP: - case STATE_STANDBY: - case STATE_AWAKE: - retval = rt2500usb_set_state(rt2x00dev, state); - break; - default: - retval = -ENOTSUPP; - break; - } - - return retval; -} - -/* - * TX descriptor initialization - */ -static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct data_desc *txd, - struct txdata_entry_desc *desc, - struct ieee80211_hdr *ieee80211hdr, - unsigned int length, - struct ieee80211_tx_control *control) -{ - u32 word; - - /* - * Start writing the descriptor words. - */ - rt2x00_desc_read(txd, 1, &word); - rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(&word, TXD_W1_AIFS, desc->aifs); - rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min); - rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max); - rt2x00_desc_write(txd, 1, word); - - rt2x00_desc_read(txd, 2, &word); - rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal); - rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service); - rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low); - rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high); - rt2x00_desc_write(txd, 2, word); - - rt2x00_desc_read(txd, 0, &word); - rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, control->retry_limit); - rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, - test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags)); - rt2x00_set_field32(&word, TXD_W0_ACK, - !(control->flags & IEEE80211_TXCTL_NO_ACK)); - rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, - test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags)); - rt2x00_set_field32(&word, TXD_W0_OFDM, - test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags)); - rt2x00_set_field32(&word, TXD_W0_NEW_SEQ, - !!(control->flags & IEEE80211_TXCTL_FIRST_FRAGMENT)); - rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs); - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, length); - rt2x00_set_field32(&word, TXD_W0_CIPHER, CIPHER_NONE); - rt2x00_desc_write(txd, 0, word); -} - -static int rt2500usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb) -{ - int length; - - /* - * The length _must_ be a multiple of 2, - * but it must _not_ be a multiple of the USB packet size. - */ - length = roundup(skb->len, 2); - length += (2 * !(length % rt2x00dev->usb_maxpacket)); - - return length; -} - -/* - * TX data initialization - */ -static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - unsigned int queue) -{ - u16 reg; - - if (queue != IEEE80211_TX_QUEUE_BEACON) - return; - - rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®); - if (!rt2x00_get_field16(reg, TXRX_CSR19_BEACON_GEN)) { - rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 1); - /* - * Beacon generation will fail initially. - * To prevent this we need to register the TXRX_CSR19 - * register several times. - */ - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0); - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0); - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); - } -} - -/* - * RX control handlers - */ -static void rt2500usb_fill_rxdone(struct data_entry *entry, - struct rxdata_entry_desc *desc) -{ - struct urb *urb = entry->priv; - struct data_desc *rxd = (struct data_desc *)(entry->skb->data + - (urb->actual_length - - entry->ring->desc_size)); - u32 word0; - u32 word1; - - rt2x00_desc_read(rxd, 0, &word0); - rt2x00_desc_read(rxd, 1, &word1); - - desc->flags = 0; - if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) - desc->flags |= RX_FLAG_FAILED_FCS_CRC; - if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR)) - desc->flags |= RX_FLAG_FAILED_PLCP_CRC; - - /* - * Obtain the status about this packet. - */ - desc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); - desc->rssi = rt2x00_get_field32(word1, RXD_W1_RSSI) - - entry->ring->rt2x00dev->rssi_offset; - desc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); - desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); - - return; -} - -/* - * Interrupt functions. - */ -static void rt2500usb_beacondone(struct urb *urb) -{ - struct data_entry *entry = (struct data_entry *)urb->context; - struct data_ring *ring = entry->ring; - - if (!test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags)) - return; - - /* - * Check if this was the guardian beacon, - * if that was the case we need to send the real beacon now. - * Otherwise we should free the sk_buffer, the device - * should be doing the rest of the work now. - */ - if (ring->index == 1) { - rt2x00_ring_index_done_inc(ring); - entry = rt2x00_get_data_entry(ring); - usb_submit_urb(entry->priv, GFP_ATOMIC); - rt2x00_ring_index_inc(ring); - } else if (ring->index_done == 1) { - entry = rt2x00_get_data_entry_done(ring); - if (entry->skb) { - dev_kfree_skb(entry->skb); - entry->skb = NULL; - } - rt2x00_ring_index_done_inc(ring); - } -} - -/* - * Device probe functions. - */ -static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) -{ - u16 word; - u8 *mac; - - rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE); - - /* - * Start validation of the data that has been read. - */ - mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); - if (!is_valid_ether_addr(mac)) { - DECLARE_MAC_BUF(macbuf); - - random_ether_addr(mac); - EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac)); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2); - rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522); - rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); - EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); - rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); - EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI, - DEFAULT_RSSI_OFFSET); - rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word); - EEPROM(rt2x00dev, "Calibrate offset: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_BBPTUNE_THRESHOLD, 45); - rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE, word); - EEPROM(rt2x00dev, "BBPtune: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCUPPER, 0x40); - rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word); - EEPROM(rt2x00dev, "BBPtune vgc: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_LOW, 0x48); - rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_HIGH, 0x41); - rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R17, word); - EEPROM(rt2x00dev, "BBPtune r17: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_LOW, 0x40); - rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_HIGH, 0x80); - rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R24, word); - EEPROM(rt2x00dev, "BBPtune r24: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_LOW, 0x40); - rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_HIGH, 0x50); - rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R25, word); - EEPROM(rt2x00dev, "BBPtune r25: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_LOW, 0x60); - rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_HIGH, 0x6d); - rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R61, word); - EEPROM(rt2x00dev, "BBPtune r61: 0x%04x\n", word); - } - - return 0; -} - -static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev) -{ - u16 reg; - u16 value; - u16 eeprom; - - /* - * Read EEPROM word for configuration. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); - - /* - * Identify RF chipset. - */ - value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); - rt2500usb_register_read(rt2x00dev, MAC_CSR0, ®); - rt2x00_set_chip(rt2x00dev, RT2570, value, reg); - - if (!rt2x00_check_rev(&rt2x00dev->chip, 0)) { - ERROR(rt2x00dev, "Invalid RT chipset detected.\n"); - return -ENODEV; - } - - if (!rt2x00_rf(&rt2x00dev->chip, RF2522) && - !rt2x00_rf(&rt2x00dev->chip, RF2523) && - !rt2x00_rf(&rt2x00dev->chip, RF2524) && - !rt2x00_rf(&rt2x00dev->chip, RF2525) && - !rt2x00_rf(&rt2x00dev->chip, RF2525E) && - !rt2x00_rf(&rt2x00dev->chip, RF5222)) { - ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); - return -ENODEV; - } - - /* - * Identify default antenna configuration. - */ - rt2x00dev->hw->conf.antenna_sel_tx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT); - rt2x00dev->hw->conf.antenna_sel_rx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT); - - /* - * Store led mode, for correct led behaviour. - */ - rt2x00dev->led_mode = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); - - /* - * Check if the BBP tuning should be disabled. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); - if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE)) - __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags); - - /* - * Read the RSSI <-> dBm offset information. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom); - rt2x00dev->rssi_offset = - rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI); - - return 0; -} - -/* - * RF value list for RF2522 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2522[] = { - { 1, 0x00002050, 0x000c1fda, 0x00000101, 0 }, - { 2, 0x00002050, 0x000c1fee, 0x00000101, 0 }, - { 3, 0x00002050, 0x000c2002, 0x00000101, 0 }, - { 4, 0x00002050, 0x000c2016, 0x00000101, 0 }, - { 5, 0x00002050, 0x000c202a, 0x00000101, 0 }, - { 6, 0x00002050, 0x000c203e, 0x00000101, 0 }, - { 7, 0x00002050, 0x000c2052, 0x00000101, 0 }, - { 8, 0x00002050, 0x000c2066, 0x00000101, 0 }, - { 9, 0x00002050, 0x000c207a, 0x00000101, 0 }, - { 10, 0x00002050, 0x000c208e, 0x00000101, 0 }, - { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 }, - { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 }, - { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 }, - { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 }, -}; - -/* - * RF value list for RF2523 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2523[] = { - { 1, 0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b }, - { 2, 0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b }, - { 3, 0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b }, - { 4, 0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b }, - { 5, 0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b }, - { 6, 0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b }, - { 7, 0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b }, - { 8, 0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b }, - { 9, 0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b }, - { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b }, - { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b }, - { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b }, - { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b }, - { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 }, -}; - -/* - * RF value list for RF2524 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2524[] = { - { 1, 0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b }, - { 2, 0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b }, - { 3, 0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b }, - { 4, 0x00032020, 0x00000caa, 0x00000101, 0x00000a1b }, - { 5, 0x00032020, 0x00000cae, 0x00000101, 0x00000a1b }, - { 6, 0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b }, - { 7, 0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b }, - { 8, 0x00032020, 0x00000cba, 0x00000101, 0x00000a1b }, - { 9, 0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b }, - { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b }, - { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b }, - { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b }, - { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b }, - { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 }, -}; - -/* - * RF value list for RF2525 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2525[] = { - { 1, 0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b }, - { 2, 0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b }, - { 3, 0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b }, - { 4, 0x00022020, 0x00080caa, 0x00060111, 0x00000a1b }, - { 5, 0x00022020, 0x00080cae, 0x00060111, 0x00000a1b }, - { 6, 0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b }, - { 7, 0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b }, - { 8, 0x00022020, 0x00080cba, 0x00060111, 0x00000a1b }, - { 9, 0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b }, - { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b }, - { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b }, - { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b }, - { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b }, - { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 }, -}; - -/* - * RF value list for RF2525e - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2525e[] = { - { 1, 0x00022010, 0x0000089a, 0x00060111, 0x00000e1b }, - { 2, 0x00022010, 0x0000089e, 0x00060111, 0x00000e07 }, - { 3, 0x00022010, 0x0000089e, 0x00060111, 0x00000e1b }, - { 4, 0x00022010, 0x000008a2, 0x00060111, 0x00000e07 }, - { 5, 0x00022010, 0x000008a2, 0x00060111, 0x00000e1b }, - { 6, 0x00022010, 0x000008a6, 0x00060111, 0x00000e07 }, - { 7, 0x00022010, 0x000008a6, 0x00060111, 0x00000e1b }, - { 8, 0x00022010, 0x000008aa, 0x00060111, 0x00000e07 }, - { 9, 0x00022010, 0x000008aa, 0x00060111, 0x00000e1b }, - { 10, 0x00022010, 0x000008ae, 0x00060111, 0x00000e07 }, - { 11, 0x00022010, 0x000008ae, 0x00060111, 0x00000e1b }, - { 12, 0x00022010, 0x000008b2, 0x00060111, 0x00000e07 }, - { 13, 0x00022010, 0x000008b2, 0x00060111, 0x00000e1b }, - { 14, 0x00022010, 0x000008b6, 0x00060111, 0x00000e23 }, -}; - -/* - * RF value list for RF5222 - * Supports: 2.4 GHz & 5.2 GHz - */ -static const struct rf_channel rf_vals_5222[] = { - { 1, 0x00022020, 0x00001136, 0x00000101, 0x00000a0b }, - { 2, 0x00022020, 0x0000113a, 0x00000101, 0x00000a0b }, - { 3, 0x00022020, 0x0000113e, 0x00000101, 0x00000a0b }, - { 4, 0x00022020, 0x00001182, 0x00000101, 0x00000a0b }, - { 5, 0x00022020, 0x00001186, 0x00000101, 0x00000a0b }, - { 6, 0x00022020, 0x0000118a, 0x00000101, 0x00000a0b }, - { 7, 0x00022020, 0x0000118e, 0x00000101, 0x00000a0b }, - { 8, 0x00022020, 0x00001192, 0x00000101, 0x00000a0b }, - { 9, 0x00022020, 0x00001196, 0x00000101, 0x00000a0b }, - { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b }, - { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b }, - { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b }, - { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b }, - { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b }, - - /* 802.11 UNI / HyperLan 2 */ - { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f }, - { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f }, - { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f }, - { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f }, - { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f }, - { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f }, - { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f }, - { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f }, - - /* 802.11 HyperLan 2 */ - { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f }, - { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f }, - { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f }, - { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f }, - { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f }, - { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f }, - { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f }, - { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f }, - { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f }, - { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f }, - - /* 802.11 UNII */ - { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f }, - { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 }, - { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 }, - { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 }, - { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 }, -}; - -static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) -{ - struct hw_mode_spec *spec = &rt2x00dev->spec; - u8 *txpower; - unsigned int i; - - /* - * Initialize all hw fields. - */ - rt2x00dev->hw->flags = - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | - IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING; - rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; - rt2x00dev->hw->max_signal = MAX_SIGNAL; - rt2x00dev->hw->max_rssi = MAX_RX_SSI; - rt2x00dev->hw->queues = 2; - - SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev); - SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, - rt2x00_eeprom_addr(rt2x00dev, - EEPROM_MAC_ADDR_0)); - - /* - * Convert tx_power array in eeprom. - */ - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); - for (i = 0; i < 14; i++) - txpower[i] = TXPOWER_FROM_DEV(txpower[i]); - - /* - * Initialize hw_mode information. - */ - spec->num_modes = 2; - spec->num_rates = 12; - spec->tx_power_a = NULL; - spec->tx_power_bg = txpower; - spec->tx_power_default = DEFAULT_TXPOWER; - - if (rt2x00_rf(&rt2x00dev->chip, RF2522)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522); - spec->channels = rf_vals_bg_2522; - } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523); - spec->channels = rf_vals_bg_2523; - } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524); - spec->channels = rf_vals_bg_2524; - } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525); - spec->channels = rf_vals_bg_2525; - } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e); - spec->channels = rf_vals_bg_2525e; - } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) { - spec->num_channels = ARRAY_SIZE(rf_vals_5222); - spec->channels = rf_vals_5222; - spec->num_modes = 3; - } -} - -static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) -{ - int retval; - - /* - * Allocate eeprom data. - */ - retval = rt2500usb_validate_eeprom(rt2x00dev); - if (retval) - return retval; - - retval = rt2500usb_init_eeprom(rt2x00dev); - if (retval) - return retval; - - /* - * Initialize hw specifications. - */ - rt2500usb_probe_hw_mode(rt2x00dev); - - /* - * This device requires the beacon ring - */ - __set_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags); - - /* - * Set the rssi offset. - */ - rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; - - return 0; -} - -/* - * IEEE80211 stack callback functions. - */ -static void rt2500usb_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - int mc_count, - struct dev_addr_list *mc_list) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct interface *intf = &rt2x00dev->interface; - u16 reg; - - /* - * Mask off any flags we are going to ignore from - * the total_flags field. - */ - *total_flags &= - FIF_ALLMULTI | - FIF_FCSFAIL | - FIF_PLCPFAIL | - FIF_CONTROL | - FIF_OTHER_BSS | - FIF_PROMISC_IN_BSS; - - /* - * Apply some rules to the filters: - * - Some filters imply different filters to be set. - * - Some things we can't filter out at all. - * - Some filters are set based on interface type. - */ - if (mc_count) - *total_flags |= FIF_ALLMULTI; - if (*total_flags & FIF_OTHER_BSS || - *total_flags & FIF_PROMISC_IN_BSS) - *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS; - if (is_interface_type(intf, IEEE80211_IF_TYPE_AP)) - *total_flags |= FIF_PROMISC_IN_BSS; - - /* - * Check if there is any work left for us. - */ - if (intf->filter == *total_flags) - return; - intf->filter = *total_flags; - - /* - * When in atomic context, reschedule and let rt2x00lib - * call this function again. - */ - if (in_atomic()) { - queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->filter_work); - return; - } - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * and broadcast frames will always be accepted since - * there is no filter for it at this time. - */ - rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®); - rt2x00_set_field16(®, TXRX_CSR2_DROP_CRC, - !(*total_flags & FIF_FCSFAIL)); - rt2x00_set_field16(®, TXRX_CSR2_DROP_PHYSICAL, - !(*total_flags & FIF_PLCPFAIL)); - rt2x00_set_field16(®, TXRX_CSR2_DROP_CONTROL, - !(*total_flags & FIF_CONTROL)); - rt2x00_set_field16(®, TXRX_CSR2_DROP_NOT_TO_ME, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field16(®, TXRX_CSR2_DROP_TODS, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field16(®, TXRX_CSR2_DROP_VERSION_ERROR, 1); - rt2x00_set_field16(®, TXRX_CSR2_DROP_MULTICAST, - !(*total_flags & FIF_ALLMULTI)); - rt2x00_set_field16(®, TXRX_CSR2_DROP_BROADCAST, 0); - rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg); -} - -static int rt2500usb_beacon_update(struct ieee80211_hw *hw, - struct sk_buff *skb, - struct ieee80211_tx_control *control) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct usb_device *usb_dev = - interface_to_usbdev(rt2x00dev_usb(rt2x00dev)); - struct data_ring *ring = - rt2x00lib_get_ring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); - struct data_entry *beacon; - struct data_entry *guardian; - int pipe = usb_sndbulkpipe(usb_dev, 1); - int length; - - /* - * Just in case the ieee80211 doesn't set this, - * but we need this queue set for the descriptor - * initialization. - */ - control->queue = IEEE80211_TX_QUEUE_BEACON; - - /* - * Obtain 2 entries, one for the guardian byte, - * the second for the actual beacon. - */ - guardian = rt2x00_get_data_entry(ring); - rt2x00_ring_index_inc(ring); - beacon = rt2x00_get_data_entry(ring); - - /* - * First we create the beacon. - */ - skb_push(skb, ring->desc_size); - memset(skb->data, 0, ring->desc_size); - - rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data, - (struct ieee80211_hdr *)(skb->data + - ring->desc_size), - skb->len - ring->desc_size, control); - - length = rt2500usb_get_tx_data_len(rt2x00dev, skb); - - usb_fill_bulk_urb(beacon->priv, usb_dev, pipe, - skb->data, length, rt2500usb_beacondone, beacon); - - beacon->skb = skb; - - /* - * Second we need to create the guardian byte. - * We only need a single byte, so lets recycle - * the 'flags' field we are not using for beacons. - */ - guardian->flags = 0; - usb_fill_bulk_urb(guardian->priv, usb_dev, pipe, - &guardian->flags, 1, rt2500usb_beacondone, guardian); - - /* - * Send out the guardian byte. - */ - usb_submit_urb(guardian->priv, GFP_ATOMIC); - - /* - * Enable beacon generation. - */ - rt2500usb_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); - - return 0; -} - -static const struct ieee80211_ops rt2500usb_mac80211_ops = { - .tx = rt2x00mac_tx, - .start = rt2x00mac_start, - .stop = rt2x00mac_stop, - .add_interface = rt2x00mac_add_interface, - .remove_interface = rt2x00mac_remove_interface, - .config = rt2x00mac_config, - .config_interface = rt2x00mac_config_interface, - .configure_filter = rt2500usb_configure_filter, - .get_stats = rt2x00mac_get_stats, - .erp_ie_changed = rt2x00mac_erp_ie_changed, - .conf_tx = rt2x00mac_conf_tx, - .get_tx_stats = rt2x00mac_get_tx_stats, - .beacon_update = rt2500usb_beacon_update, -}; - -static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = { - .probe_hw = rt2500usb_probe_hw, - .initialize = rt2x00usb_initialize, - .uninitialize = rt2x00usb_uninitialize, - .set_device_state = rt2500usb_set_device_state, - .link_stats = rt2500usb_link_stats, - .reset_tuner = rt2500usb_reset_tuner, - .link_tuner = rt2500usb_link_tuner, - .write_tx_desc = rt2500usb_write_tx_desc, - .write_tx_data = rt2x00usb_write_tx_data, - .get_tx_data_len = rt2500usb_get_tx_data_len, - .kick_tx_queue = rt2500usb_kick_tx_queue, - .fill_rxdone = rt2500usb_fill_rxdone, - .config_mac_addr = rt2500usb_config_mac_addr, - .config_bssid = rt2500usb_config_bssid, - .config_type = rt2500usb_config_type, - .config_preamble = rt2500usb_config_preamble, - .config = rt2500usb_config, -}; - -static const struct rt2x00_ops rt2500usb_ops = { - .name = DRV_NAME, - .rxd_size = RXD_DESC_SIZE, - .txd_size = TXD_DESC_SIZE, - .eeprom_size = EEPROM_SIZE, - .rf_size = RF_SIZE, - .lib = &rt2500usb_rt2x00_ops, - .hw = &rt2500usb_mac80211_ops, -#ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt2500usb_rt2x00debug, -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -}; - -/* - * rt2500usb module information. - */ -static struct usb_device_id rt2500usb_device_table[] = { - /* ASUS */ - { USB_DEVICE(0x0b05, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) }, - { USB_DEVICE(0x0b05, 0x1707), USB_DEVICE_DATA(&rt2500usb_ops) }, - /* Belkin */ - { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt2500usb_ops) }, - { USB_DEVICE(0x050d, 0x7051), USB_DEVICE_DATA(&rt2500usb_ops) }, - { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt2500usb_ops) }, - /* Cisco Systems */ - { USB_DEVICE(0x13b1, 0x000d), USB_DEVICE_DATA(&rt2500usb_ops) }, - { USB_DEVICE(0x13b1, 0x0011), USB_DEVICE_DATA(&rt2500usb_ops) }, - { USB_DEVICE(0x13b1, 0x001a), USB_DEVICE_DATA(&rt2500usb_ops) }, - /* Conceptronic */ - { USB_DEVICE(0x14b2, 0x3c02), USB_DEVICE_DATA(&rt2500usb_ops) }, - /* D-LINK */ - { USB_DEVICE(0x2001, 0x3c00), USB_DEVICE_DATA(&rt2500usb_ops) }, - /* Gigabyte */ - { USB_DEVICE(0x1044, 0x8001), USB_DEVICE_DATA(&rt2500usb_ops) }, - { USB_DEVICE(0x1044, 0x8007), USB_DEVICE_DATA(&rt2500usb_ops) }, - /* Hercules */ - { USB_DEVICE(0x06f8, 0xe000), USB_DEVICE_DATA(&rt2500usb_ops) }, - /* Melco */ - { USB_DEVICE(0x0411, 0x0066), USB_DEVICE_DATA(&rt2500usb_ops) }, - { USB_DEVICE(0x0411, 0x0067), USB_DEVICE_DATA(&rt2500usb_ops) }, - { USB_DEVICE(0x0411, 0x008b), USB_DEVICE_DATA(&rt2500usb_ops) }, - { USB_DEVICE(0x0411, 0x0097), USB_DEVICE_DATA(&rt2500usb_ops) }, - - /* MSI */ - { USB_DEVICE(0x0db0, 0x6861), USB_DEVICE_DATA(&rt2500usb_ops) }, - { USB_DEVICE(0x0db0, 0x6865), USB_DEVICE_DATA(&rt2500usb_ops) }, - { USB_DEVICE(0x0db0, 0x6869), USB_DEVICE_DATA(&rt2500usb_ops) }, - /* Ralink */ - { USB_DEVICE(0x148f, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) }, - { USB_DEVICE(0x148f, 0x2570), USB_DEVICE_DATA(&rt2500usb_ops) }, - { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt2500usb_ops) }, - { USB_DEVICE(0x148f, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) }, - /* Siemens */ - { USB_DEVICE(0x0681, 0x3c06), USB_DEVICE_DATA(&rt2500usb_ops) }, - /* SMC */ - { USB_DEVICE(0x0707, 0xee13), USB_DEVICE_DATA(&rt2500usb_ops) }, - /* Spairon */ - { USB_DEVICE(0x114b, 0x0110), USB_DEVICE_DATA(&rt2500usb_ops) }, - /* Trust */ - { USB_DEVICE(0x0eb0, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) }, - /* Zinwell */ - { USB_DEVICE(0x5a57, 0x0260), USB_DEVICE_DATA(&rt2500usb_ops) }, - { 0, } -}; - -MODULE_AUTHOR(DRV_PROJECT); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("Ralink RT2500 USB Wireless LAN driver."); -MODULE_SUPPORTED_DEVICE("Ralink RT2570 USB chipset based cards"); -MODULE_DEVICE_TABLE(usb, rt2500usb_device_table); -MODULE_LICENSE("GPL"); - -static struct usb_driver rt2500usb_driver = { - .name = DRV_NAME, - .id_table = rt2500usb_device_table, - .probe = rt2x00usb_probe, - .disconnect = rt2x00usb_disconnect, - .suspend = rt2x00usb_suspend, - .resume = rt2x00usb_resume, -}; - -static int __init rt2500usb_init(void) -{ - return usb_register(&rt2500usb_driver); -} - -static void __exit rt2500usb_exit(void) -{ - usb_deregister(&rt2500usb_driver); -} - -module_init(rt2500usb_init); -module_exit(rt2500usb_exit); diff --git a/package/rt2x00/src/rt2500usb.h b/package/rt2x00/src/rt2500usb.h deleted file mode 100644 index b18d56e73cf..00000000000 --- a/package/rt2x00/src/rt2500usb.h +++ /dev/null @@ -1,798 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2500usb - Abstract: Data structures and registers for the rt2500usb module. - Supported chipsets: RT2570. - */ - -#ifndef RT2500USB_H -#define RT2500USB_H - -/* - * RF chip defines. - */ -#define RF2522 0x0000 -#define RF2523 0x0001 -#define RF2524 0x0002 -#define RF2525 0x0003 -#define RF2525E 0x0005 -#define RF5222 0x0010 - -/* - * RT2570 version - */ -#define RT2570_VERSION_B 2 -#define RT2570_VERSION_C 3 -#define RT2570_VERSION_D 4 - -/* - * Signal information. - * Defaul offset is required for RSSI <-> dBm conversion. - */ -#define MAX_SIGNAL 100 -#define MAX_RX_SSI -1 -#define DEFAULT_RSSI_OFFSET 120 - -/* - * Register layout information. - */ -#define CSR_REG_BASE 0x0400 -#define CSR_REG_SIZE 0x0100 -#define EEPROM_BASE 0x0000 -#define EEPROM_SIZE 0x006a -#define BBP_SIZE 0x0060 -#define RF_SIZE 0x0014 - -/* - * Control/Status Registers(CSR). - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * MAC_CSR0: ASIC revision number. - */ -#define MAC_CSR0 0x0400 - -/* - * MAC_CSR1: System control. - * SOFT_RESET: Software reset, 1: reset, 0: normal. - * BBP_RESET: Hardware reset, 1: reset, 0, release. - * HOST_READY: Host ready after initialization. - */ -#define MAC_CSR1 0x0402 -#define MAC_CSR1_SOFT_RESET FIELD16(0x00000001) -#define MAC_CSR1_BBP_RESET FIELD16(0x00000002) -#define MAC_CSR1_HOST_READY FIELD16(0x00000004) - -/* - * MAC_CSR2: STA MAC register 0. - */ -#define MAC_CSR2 0x0404 -#define MAC_CSR2_BYTE0 FIELD16(0x00ff) -#define MAC_CSR2_BYTE1 FIELD16(0xff00) - -/* - * MAC_CSR3: STA MAC register 1. - */ -#define MAC_CSR3 0x0406 -#define MAC_CSR3_BYTE2 FIELD16(0x00ff) -#define MAC_CSR3_BYTE3 FIELD16(0xff00) - -/* - * MAC_CSR4: STA MAC register 2. - */ -#define MAC_CSR4 0X0408 -#define MAC_CSR4_BYTE4 FIELD16(0x00ff) -#define MAC_CSR4_BYTE5 FIELD16(0xff00) - -/* - * MAC_CSR5: BSSID register 0. - */ -#define MAC_CSR5 0x040a -#define MAC_CSR5_BYTE0 FIELD16(0x00ff) -#define MAC_CSR5_BYTE1 FIELD16(0xff00) - -/* - * MAC_CSR6: BSSID register 1. - */ -#define MAC_CSR6 0x040c -#define MAC_CSR6_BYTE2 FIELD16(0x00ff) -#define MAC_CSR6_BYTE3 FIELD16(0xff00) - -/* - * MAC_CSR7: BSSID register 2. - */ -#define MAC_CSR7 0x040e -#define MAC_CSR7_BYTE4 FIELD16(0x00ff) -#define MAC_CSR7_BYTE5 FIELD16(0xff00) - -/* - * MAC_CSR8: Max frame length. - */ -#define MAC_CSR8 0x0410 -#define MAC_CSR8_MAX_FRAME_UNIT FIELD16(0x0fff) - -/* - * Misc MAC_CSR registers. - * MAC_CSR9: Timer control. - * MAC_CSR10: Slot time. - * MAC_CSR11: IFS. - * MAC_CSR12: EIFS. - * MAC_CSR13: Power mode0. - * MAC_CSR14: Power mode1. - * MAC_CSR15: Power saving transition0 - * MAC_CSR16: Power saving transition1 - */ -#define MAC_CSR9 0x0412 -#define MAC_CSR10 0x0414 -#define MAC_CSR11 0x0416 -#define MAC_CSR12 0x0418 -#define MAC_CSR13 0x041a -#define MAC_CSR14 0x041c -#define MAC_CSR15 0x041e -#define MAC_CSR16 0x0420 - -/* - * MAC_CSR17: Manual power control / status register. - * Allowed state: 0 deep_sleep, 1: sleep, 2: standby, 3: awake. - * SET_STATE: Set state. Write 1 to trigger, self cleared. - * BBP_DESIRE_STATE: BBP desired state. - * RF_DESIRE_STATE: RF desired state. - * BBP_CURRENT_STATE: BBP current state. - * RF_CURRENT_STATE: RF current state. - * PUT_TO_SLEEP: Put to sleep. Write 1 to trigger, self cleared. - */ -#define MAC_CSR17 0x0422 -#define MAC_CSR17_SET_STATE FIELD16(0x0001) -#define MAC_CSR17_BBP_DESIRE_STATE FIELD16(0x0006) -#define MAC_CSR17_RF_DESIRE_STATE FIELD16(0x0018) -#define MAC_CSR17_BBP_CURR_STATE FIELD16(0x0060) -#define MAC_CSR17_RF_CURR_STATE FIELD16(0x0180) -#define MAC_CSR17_PUT_TO_SLEEP FIELD16(0x0200) - -/* - * MAC_CSR18: Wakeup timer register. - * DELAY_AFTER_BEACON: Delay after Tbcn expired in units of 1/16 TU. - * BEACONS_BEFORE_WAKEUP: Number of beacon before wakeup. - * AUTO_WAKE: Enable auto wakeup / sleep mechanism. - */ -#define MAC_CSR18 0x0424 -#define MAC_CSR18_DELAY_AFTER_BEACON FIELD16(0x00ff) -#define MAC_CSR18_BEACONS_BEFORE_WAKEUP FIELD16(0x7f00) -#define MAC_CSR18_AUTO_WAKE FIELD16(0x8000) - -/* - * MAC_CSR19: GPIO control register. - */ -#define MAC_CSR19 0x0426 - -/* - * MAC_CSR20: LED control register. - * ACTIVITY: 0: idle, 1: active. - * LINK: 0: linkoff, 1: linkup. - * ACTIVITY_POLARITY: 0: active low, 1: active high. - */ -#define MAC_CSR20 0x0428 -#define MAC_CSR20_ACTIVITY FIELD16(0x0001) -#define MAC_CSR20_LINK FIELD16(0x0002) -#define MAC_CSR20_ACTIVITY_POLARITY FIELD16(0x0004) - -/* - * MAC_CSR21: LED control register. - * ON_PERIOD: On period, default 70ms. - * OFF_PERIOD: Off period, default 30ms. - */ -#define MAC_CSR21 0x042a -#define MAC_CSR21_ON_PERIOD FIELD16(0x00ff) -#define MAC_CSR21_OFF_PERIOD FIELD16(0xff00) - -/* - * Collision window control register. - */ -#define MAC_CSR22 0x042c - -/* - * Transmit related CSRs. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * TXRX_CSR0: Security control register. - */ -#define TXRX_CSR0 0x0440 -#define TXRX_CSR0_ALGORITHM FIELD16(0x0007) -#define TXRX_CSR0_IV_OFFSET FIELD16(0x01f8) -#define TXRX_CSR0_KEY_ID FIELD16(0x1e00) - -/* - * TXRX_CSR1: TX configuration. - * ACK_TIMEOUT: ACK Timeout in unit of 1-us. - * TSF_OFFSET: TSF offset in MAC header. - * AUTO_SEQUENCE: Let ASIC control frame sequence number. - */ -#define TXRX_CSR1 0x0442 -#define TXRX_CSR1_ACK_TIMEOUT FIELD16(0x00ff) -#define TXRX_CSR1_TSF_OFFSET FIELD16(0x7f00) -#define TXRX_CSR1_AUTO_SEQUENCE FIELD16(0x8000) - -/* - * TXRX_CSR2: RX control. - * DISABLE_RX: Disable rx engine. - * DROP_CRC: Drop crc error. - * DROP_PHYSICAL: Drop physical error. - * DROP_CONTROL: Drop control frame. - * DROP_NOT_TO_ME: Drop not to me unicast frame. - * DROP_TODS: Drop frame tods bit is true. - * DROP_VERSION_ERROR: Drop version error frame. - * DROP_MCAST: Drop multicast frames. - * DROP_BCAST: Drop broadcast frames. - */ -#define TXRX_CSR2 0x0444 -#define TXRX_CSR2_DISABLE_RX FIELD16(0x0001) -#define TXRX_CSR2_DROP_CRC FIELD16(0x0002) -#define TXRX_CSR2_DROP_PHYSICAL FIELD16(0x0004) -#define TXRX_CSR2_DROP_CONTROL FIELD16(0x0008) -#define TXRX_CSR2_DROP_NOT_TO_ME FIELD16(0x0010) -#define TXRX_CSR2_DROP_TODS FIELD16(0x0020) -#define TXRX_CSR2_DROP_VERSION_ERROR FIELD16(0x0040) -#define TXRX_CSR2_DROP_MULTICAST FIELD16(0x0200) -#define TXRX_CSR2_DROP_BROADCAST FIELD16(0x0400) - -/* - * RX BBP ID registers - * TXRX_CSR3: CCK RX BBP ID. - * TXRX_CSR4: OFDM RX BBP ID. - */ -#define TXRX_CSR3 0x0446 -#define TXRX_CSR4 0x0448 - -/* - * TXRX_CSR5: CCK TX BBP ID0. - */ -#define TXRX_CSR5 0x044a -#define TXRX_CSR5_BBP_ID0 FIELD16(0x007f) -#define TXRX_CSR5_BBP_ID0_VALID FIELD16(0x0080) -#define TXRX_CSR5_BBP_ID1 FIELD16(0x7f00) -#define TXRX_CSR5_BBP_ID1_VALID FIELD16(0x8000) - -/* - * TXRX_CSR6: CCK TX BBP ID1. - */ -#define TXRX_CSR6 0x044c -#define TXRX_CSR6_BBP_ID0 FIELD16(0x007f) -#define TXRX_CSR6_BBP_ID0_VALID FIELD16(0x0080) -#define TXRX_CSR6_BBP_ID1 FIELD16(0x7f00) -#define TXRX_CSR6_BBP_ID1_VALID FIELD16(0x8000) - -/* - * TXRX_CSR7: OFDM TX BBP ID0. - */ -#define TXRX_CSR7 0x044e -#define TXRX_CSR7_BBP_ID0 FIELD16(0x007f) -#define TXRX_CSR7_BBP_ID0_VALID FIELD16(0x0080) -#define TXRX_CSR7_BBP_ID1 FIELD16(0x7f00) -#define TXRX_CSR7_BBP_ID1_VALID FIELD16(0x8000) - -/* - * TXRX_CSR5: OFDM TX BBP ID1. - */ -#define TXRX_CSR8 0x0450 -#define TXRX_CSR8_BBP_ID0 FIELD16(0x007f) -#define TXRX_CSR8_BBP_ID0_VALID FIELD16(0x0080) -#define TXRX_CSR8_BBP_ID1 FIELD16(0x7f00) -#define TXRX_CSR8_BBP_ID1_VALID FIELD16(0x8000) - -/* - * TXRX_CSR9: TX ACK time-out. - */ -#define TXRX_CSR9 0x0452 - -/* - * TXRX_CSR10: Auto responder control. - */ -#define TXRX_CSR10 0x0454 -#define TXRX_CSR10_AUTORESPOND_PREAMBLE FIELD16(0x0004) - -/* - * TXRX_CSR11: Auto responder basic rate. - */ -#define TXRX_CSR11 0x0456 - -/* - * ACK/CTS time registers. - */ -#define TXRX_CSR12 0x0458 -#define TXRX_CSR13 0x045a -#define TXRX_CSR14 0x045c -#define TXRX_CSR15 0x045e -#define TXRX_CSR16 0x0460 -#define TXRX_CSR17 0x0462 - -/* - * TXRX_CSR18: Synchronization control register. - */ -#define TXRX_CSR18 0x0464 -#define TXRX_CSR18_OFFSET FIELD16(0x000f) -#define TXRX_CSR18_INTERVAL FIELD16(0xfff0) - -/* - * TXRX_CSR19: Synchronization control register. - * TSF_COUNT: Enable TSF auto counting. - * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode. - * TBCN: Enable Tbcn with reload value. - * BEACON_GEN: Enable beacon generator. - */ -#define TXRX_CSR19 0x0466 -#define TXRX_CSR19_TSF_COUNT FIELD16(0x0001) -#define TXRX_CSR19_TSF_SYNC FIELD16(0x0006) -#define TXRX_CSR19_TBCN FIELD16(0x0008) -#define TXRX_CSR19_BEACON_GEN FIELD16(0x0010) - -/* - * TXRX_CSR20: Tx BEACON offset time control register. - * OFFSET: In units of usec. - * BCN_EXPECT_WINDOW: Default: 2^CWmin - */ -#define TXRX_CSR20 0x0468 -#define TXRX_CSR20_OFFSET FIELD16(0x1fff) -#define TXRX_CSR20_BCN_EXPECT_WINDOW FIELD16(0xe000) - -/* - * TXRX_CSR21 - */ -#define TXRX_CSR21 0x046a - -/* - * Encryption related CSRs. - * - */ - -/* - * SEC_CSR0-SEC_CSR7: Shared key 0, word 0-7 - */ -#define SEC_CSR0 0x0480 -#define SEC_CSR1 0x0482 -#define SEC_CSR2 0x0484 -#define SEC_CSR3 0x0486 -#define SEC_CSR4 0x0488 -#define SEC_CSR5 0x048a -#define SEC_CSR6 0x048c -#define SEC_CSR7 0x048e - -/* - * SEC_CSR8-SEC_CSR15: Shared key 1, word 0-7 - */ -#define SEC_CSR8 0x0490 -#define SEC_CSR9 0x0492 -#define SEC_CSR10 0x0494 -#define SEC_CSR11 0x0496 -#define SEC_CSR12 0x0498 -#define SEC_CSR13 0x049a -#define SEC_CSR14 0x049c -#define SEC_CSR15 0x049e - -/* - * SEC_CSR16-SEC_CSR23: Shared key 2, word 0-7 - */ -#define SEC_CSR16 0x04a0 -#define SEC_CSR17 0x04a2 -#define SEC_CSR18 0X04A4 -#define SEC_CSR19 0x04a6 -#define SEC_CSR20 0x04a8 -#define SEC_CSR21 0x04aa -#define SEC_CSR22 0x04ac -#define SEC_CSR23 0x04ae - -/* - * SEC_CSR24-SEC_CSR31: Shared key 3, word 0-7 - */ -#define SEC_CSR24 0x04b0 -#define SEC_CSR25 0x04b2 -#define SEC_CSR26 0x04b4 -#define SEC_CSR27 0x04b6 -#define SEC_CSR28 0x04b8 -#define SEC_CSR29 0x04ba -#define SEC_CSR30 0x04bc -#define SEC_CSR31 0x04be - -/* - * PHY control registers. - */ - -/* - * PHY_CSR0: RF switching timing control. - */ -#define PHY_CSR0 0x04c0 - -/* - * PHY_CSR1: TX PA configuration. - */ -#define PHY_CSR1 0x04c2 - -/* - * MAC configuration registers. - * PHY_CSR2: TX MAC configuration. - * PHY_CSR3: RX MAC configuration. - */ -#define PHY_CSR2 0x04c4 -#define PHY_CSR3 0x04c6 - -/* - * PHY_CSR4: Interface configuration. - */ -#define PHY_CSR4 0x04c8 -#define PHY_CSR4_LOW_RF_LE FIELD16(0x0001) - -/* - * BBP pre-TX registers. - * PHY_CSR5: BBP pre-TX CCK. - */ -#define PHY_CSR5 0x04ca -#define PHY_CSR5_CCK FIELD16(0x0003) -#define PHY_CSR5_CCK_FLIP FIELD16(0x0004) - -/* - * BBP pre-TX registers. - * PHY_CSR6: BBP pre-TX OFDM. - */ -#define PHY_CSR6 0x04cc -#define PHY_CSR6_OFDM FIELD16(0x0003) -#define PHY_CSR6_OFDM_FLIP FIELD16(0x0004) - -/* - * PHY_CSR7: BBP access register 0. - * BBP_DATA: BBP data. - * BBP_REG_ID: BBP register ID. - * BBP_READ_CONTROL: 0: write, 1: read. - */ -#define PHY_CSR7 0x04ce -#define PHY_CSR7_DATA FIELD16(0x00ff) -#define PHY_CSR7_REG_ID FIELD16(0x7f00) -#define PHY_CSR7_READ_CONTROL FIELD16(0x8000) - -/* - * PHY_CSR8: BBP access register 1. - * BBP_BUSY: ASIC is busy execute BBP programming. - */ -#define PHY_CSR8 0x04d0 -#define PHY_CSR8_BUSY FIELD16(0x0001) - -/* - * PHY_CSR9: RF access register. - * RF_VALUE: Register value + id to program into rf/if. - */ -#define PHY_CSR9 0x04d2 -#define PHY_CSR9_RF_VALUE FIELD16(0xffff) - -/* - * PHY_CSR10: RF access register. - * RF_VALUE: Register value + id to program into rf/if. - * RF_NUMBER_OF_BITS: Number of bits used in value (i:20, rfmd:22). - * RF_IF_SELECT: Chip to program: 0: rf, 1: if. - * RF_PLL_LD: Rf pll_ld status. - * RF_BUSY: 1: asic is busy execute rf programming. - */ -#define PHY_CSR10 0x04d4 -#define PHY_CSR10_RF_VALUE FIELD16(0x00ff) -#define PHY_CSR10_RF_NUMBER_OF_BITS FIELD16(0x1f00) -#define PHY_CSR10_RF_IF_SELECT FIELD16(0x2000) -#define PHY_CSR10_RF_PLL_LD FIELD16(0x4000) -#define PHY_CSR10_RF_BUSY FIELD16(0x8000) - -/* - * STA_CSR0: FCS error count. - * FCS_ERROR: FCS error count, cleared when read. - */ -#define STA_CSR0 0x04e0 -#define STA_CSR0_FCS_ERROR FIELD16(0xffff) - -/* - * STA_CSR1: PLCP error count. - */ -#define STA_CSR1 0x04e2 - -/* - * STA_CSR2: LONG error count. - */ -#define STA_CSR2 0x04e4 - -/* - * STA_CSR3: CCA false alarm. - * FALSE_CCA_ERROR: False CCA error count, cleared when read. - */ -#define STA_CSR3 0x04e6 -#define STA_CSR3_FALSE_CCA_ERROR FIELD16(0xffff) - -/* - * STA_CSR4: RX FIFO overflow. - */ -#define STA_CSR4 0x04e8 - -/* - * STA_CSR5: Beacon sent counter. - */ -#define STA_CSR5 0x04ea - -/* - * Statistics registers - */ -#define STA_CSR6 0x04ec -#define STA_CSR7 0x04ee -#define STA_CSR8 0x04f0 -#define STA_CSR9 0x04f2 -#define STA_CSR10 0x04f4 - -/* - * BBP registers. - * The wordsize of the BBP is 8 bits. - */ - -/* - * R2: TX antenna control - */ -#define BBP_R2_TX_ANTENNA FIELD8(0x03) -#define BBP_R2_TX_IQ_FLIP FIELD8(0x04) - -/* - * R14: RX antenna control - */ -#define BBP_R14_RX_ANTENNA FIELD8(0x03) -#define BBP_R14_RX_IQ_FLIP FIELD8(0x04) - -/* - * RF registers. - */ - -/* - * RF 1 - */ -#define RF1_TUNER FIELD32(0x00020000) - -/* - * RF 3 - */ -#define RF3_TUNER FIELD32(0x00000100) -#define RF3_TXPOWER FIELD32(0x00003e00) - -/* - * EEPROM contents. - */ - -/* - * HW MAC address. - */ -#define EEPROM_MAC_ADDR_0 0x0002 -#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) -#define EEPROM_MAC_ADDR1 0x0003 -#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) -#define EEPROM_MAC_ADDR_2 0x0004 -#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) - -/* - * EEPROM antenna. - * ANTENNA_NUM: Number of antenna's. - * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * LED_MODE: 0: default, 1: TX/RX activity, 2: Single (ignore link), 3: rsvd. - * DYN_TXAGC: Dynamic TX AGC control. - * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0. - * RF_TYPE: Rf_type of this adapter. - */ -#define EEPROM_ANTENNA 0x000b -#define EEPROM_ANTENNA_NUM FIELD16(0x0003) -#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c) -#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030) -#define EEPROM_ANTENNA_LED_MODE FIELD16(0x01c0) -#define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200) -#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400) -#define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800) - -/* - * EEPROM NIC config. - * CARDBUS_ACCEL: 0: enable, 1: disable. - * DYN_BBP_TUNE: 0: enable, 1: disable. - * CCK_TX_POWER: CCK TX power compensation. - */ -#define EEPROM_NIC 0x000c -#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0001) -#define EEPROM_NIC_DYN_BBP_TUNE FIELD16(0x0002) -#define EEPROM_NIC_CCK_TX_POWER FIELD16(0x000c) - -/* - * EEPROM geography. - * GEO: Default geography setting for device. - */ -#define EEPROM_GEOGRAPHY 0x000d -#define EEPROM_GEOGRAPHY_GEO FIELD16(0x0f00) - -/* - * EEPROM BBP. - */ -#define EEPROM_BBP_START 0x000e -#define EEPROM_BBP_SIZE 16 -#define EEPROM_BBP_VALUE FIELD16(0x00ff) -#define EEPROM_BBP_REG_ID FIELD16(0xff00) - -/* - * EEPROM TXPOWER - */ -#define EEPROM_TXPOWER_START 0x001e -#define EEPROM_TXPOWER_SIZE 7 -#define EEPROM_TXPOWER_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_2 FIELD16(0xff00) - -/* - * EEPROM Tuning threshold - */ -#define EEPROM_BBPTUNE 0x0030 -#define EEPROM_BBPTUNE_THRESHOLD FIELD16(0x00ff) - -/* - * EEPROM BBP R24 Tuning. - */ -#define EEPROM_BBPTUNE_R24 0x0031 -#define EEPROM_BBPTUNE_R24_LOW FIELD16(0x00ff) -#define EEPROM_BBPTUNE_R24_HIGH FIELD16(0xff00) - -/* - * EEPROM BBP R25 Tuning. - */ -#define EEPROM_BBPTUNE_R25 0x0032 -#define EEPROM_BBPTUNE_R25_LOW FIELD16(0x00ff) -#define EEPROM_BBPTUNE_R25_HIGH FIELD16(0xff00) - -/* - * EEPROM BBP R24 Tuning. - */ -#define EEPROM_BBPTUNE_R61 0x0033 -#define EEPROM_BBPTUNE_R61_LOW FIELD16(0x00ff) -#define EEPROM_BBPTUNE_R61_HIGH FIELD16(0xff00) - -/* - * EEPROM BBP VGC Tuning. - */ -#define EEPROM_BBPTUNE_VGC 0x0034 -#define EEPROM_BBPTUNE_VGCUPPER FIELD16(0x00ff) - -/* - * EEPROM BBP R17 Tuning. - */ -#define EEPROM_BBPTUNE_R17 0x0035 -#define EEPROM_BBPTUNE_R17_LOW FIELD16(0x00ff) -#define EEPROM_BBPTUNE_R17_HIGH FIELD16(0xff00) - -/* - * RSSI <-> dBm offset calibration - */ -#define EEPROM_CALIBRATE_OFFSET 0x0036 -#define EEPROM_CALIBRATE_OFFSET_RSSI FIELD16(0x00ff) - -/* - * DMA descriptor defines. - */ -#define TXD_DESC_SIZE ( 5 * sizeof(struct data_desc) ) -#define RXD_DESC_SIZE ( 4 * sizeof(struct data_desc) ) - -/* - * TX descriptor format for TX, PRIO, ATIM and Beacon Ring. - */ - -/* - * Word0 - */ -#define TXD_W0_PACKET_ID FIELD32(0x0000000f) -#define TXD_W0_RETRY_LIMIT FIELD32(0x000000f0) -#define TXD_W0_MORE_FRAG FIELD32(0x00000100) -#define TXD_W0_ACK FIELD32(0x00000200) -#define TXD_W0_TIMESTAMP FIELD32(0x00000400) -#define TXD_W0_OFDM FIELD32(0x00000800) -#define TXD_W0_NEW_SEQ FIELD32(0x00001000) -#define TXD_W0_IFS FIELD32(0x00006000) -#define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) -#define TXD_W0_CIPHER FIELD32(0x20000000) -#define TXD_W0_KEY_ID FIELD32(0xc0000000) - -/* - * Word1 - */ -#define TXD_W1_IV_OFFSET FIELD32(0x0000003f) -#define TXD_W1_AIFS FIELD32(0x000000c0) -#define TXD_W1_CWMIN FIELD32(0x00000f00) -#define TXD_W1_CWMAX FIELD32(0x0000f000) - -/* - * Word2: PLCP information - */ -#define TXD_W2_PLCP_SIGNAL FIELD32(0x000000ff) -#define TXD_W2_PLCP_SERVICE FIELD32(0x0000ff00) -#define TXD_W2_PLCP_LENGTH_LOW FIELD32(0x00ff0000) -#define TXD_W2_PLCP_LENGTH_HIGH FIELD32(0xff000000) - -/* - * Word3 - */ -#define TXD_W3_IV FIELD32(0xffffffff) - -/* - * Word4 - */ -#define TXD_W4_EIV FIELD32(0xffffffff) - -/* - * RX descriptor format for RX Ring. - */ - -/* - * Word0 - */ -#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000002) -#define RXD_W0_MULTICAST FIELD32(0x00000004) -#define RXD_W0_BROADCAST FIELD32(0x00000008) -#define RXD_W0_MY_BSS FIELD32(0x00000010) -#define RXD_W0_CRC_ERROR FIELD32(0x00000020) -#define RXD_W0_OFDM FIELD32(0x00000040) -#define RXD_W0_PHYSICAL_ERROR FIELD32(0x00000080) -#define RXD_W0_CIPHER FIELD32(0x00000100) -#define RXD_W0_CIPHER_ERROR FIELD32(0x00000200) -#define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) - -/* - * Word1 - */ -#define RXD_W1_RSSI FIELD32(0x000000ff) -#define RXD_W1_SIGNAL FIELD32(0x0000ff00) - -/* - * Word2 - */ -#define RXD_W2_IV FIELD32(0xffffffff) - -/* - * Word3 - */ -#define RXD_W3_EIV FIELD32(0xffffffff) - -/* - * Macro's for converting txpower from EEPROM to dscape value - * and from dscape value to register value. - */ -#define MIN_TXPOWER 0 -#define MAX_TXPOWER 31 -#define DEFAULT_TXPOWER 24 - -#define TXPOWER_FROM_DEV(__txpower) \ -({ \ - ((__txpower) > MAX_TXPOWER) ? \ - DEFAULT_TXPOWER : (__txpower); \ -}) - -#define TXPOWER_TO_DEV(__txpower) \ -({ \ - ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \ - (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \ - (__txpower)); \ -}) - -#endif /* RT2500USB_H */ diff --git a/package/rt2x00/src/rt2x00.h b/package/rt2x00/src/rt2x00.h deleted file mode 100644 index c8f16f161c2..00000000000 --- a/package/rt2x00/src/rt2x00.h +++ /dev/null @@ -1,845 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2x00 - Abstract: rt2x00 global information. - */ - -#ifndef RT2X00_H -#define RT2X00_H - -#include -#include -#include -#include -#include - -#include - -#include "rt2x00debug.h" -#include "rt2x00reg.h" -#include "rt2x00ring.h" - -/* - * Module information. - * DRV_NAME should be set within the individual module source files. - */ -#define DRV_VERSION "2.0.10" -#define DRV_PROJECT "http://rt2x00.serialmonkey.com" - -/* - * Debug definitions. - * Debug output has to be enabled during compile time. - */ -#define DEBUG_PRINTK_MSG(__dev, __kernlvl, __lvl, __msg, __args...) \ - printk(__kernlvl "%s -> %s: %s - " __msg, \ - wiphy_name((__dev)->hw->wiphy), __FUNCTION__, __lvl, ##__args) - -#define DEBUG_PRINTK_PROBE(__kernlvl, __lvl, __msg, __args...) \ - printk(__kernlvl "%s -> %s: %s - " __msg, \ - DRV_NAME, __FUNCTION__, __lvl, ##__args) - -#ifdef CONFIG_RT2X00_DEBUG -#define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...) \ - DEBUG_PRINTK_MSG(__dev, __kernlvl, __lvl, __msg, ##__args); -#else -#define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...) \ - do { } while (0) -#endif /* CONFIG_RT2X00_DEBUG */ - -/* - * Various debug levels. - * The debug levels PANIC and ERROR both indicate serious problems, - * for this reason they should never be ignored. - * The special ERROR_PROBE message is for messages that are generated - * when the rt2x00_dev is not yet initialized. - */ -#define PANIC(__dev, __msg, __args...) \ - DEBUG_PRINTK_MSG(__dev, KERN_CRIT, "Panic", __msg, ##__args) -#define ERROR(__dev, __msg, __args...) \ - DEBUG_PRINTK_MSG(__dev, KERN_ERR, "Error", __msg, ##__args) -#define ERROR_PROBE(__msg, __args...) \ - DEBUG_PRINTK_PROBE(KERN_ERR, "Error", __msg, ##__args) -#define WARNING(__dev, __msg, __args...) \ - DEBUG_PRINTK(__dev, KERN_WARNING, "Warning", __msg, ##__args) -#define NOTICE(__dev, __msg, __args...) \ - DEBUG_PRINTK(__dev, KERN_NOTICE, "Notice", __msg, ##__args) -#define INFO(__dev, __msg, __args...) \ - DEBUG_PRINTK(__dev, KERN_INFO, "Info", __msg, ##__args) -#define DEBUG(__dev, __msg, __args...) \ - DEBUG_PRINTK(__dev, KERN_DEBUG, "Debug", __msg, ##__args) -#define EEPROM(__dev, __msg, __args...) \ - DEBUG_PRINTK(__dev, KERN_DEBUG, "EEPROM recovery", __msg, ##__args) - -/* - * Ring sizes. - * Ralink PCI devices demand the Frame size to be a multiple of 128 bytes. - * DATA_FRAME_SIZE is used for TX, RX, ATIM and PRIO rings. - * MGMT_FRAME_SIZE is used for the BEACON ring. - */ -#define DATA_FRAME_SIZE 2432 -#define MGMT_FRAME_SIZE 256 - -/* - * Number of entries in a packet ring. - * PCI devices only need 1 Beacon entry, - * but USB devices require a second because they - * have to send a Guardian byte first. - */ -#define RX_ENTRIES 12 -#define TX_ENTRIES 12 -#define ATIM_ENTRIES 1 -#define BEACON_ENTRIES 2 - -/* - * Standard timing and size defines. - * These values should follow the ieee80211 specifications. - */ -#define ACK_SIZE 14 -#define IEEE80211_HEADER 24 -#define PLCP 48 -#define BEACON 100 -#define PREAMBLE 144 -#define SHORT_PREAMBLE 72 -#define SLOT_TIME 20 -#define SHORT_SLOT_TIME 9 -#define SIFS 10 -#define PIFS ( SIFS + SLOT_TIME ) -#define SHORT_PIFS ( SIFS + SHORT_SLOT_TIME ) -#define DIFS ( PIFS + SLOT_TIME ) -#define SHORT_DIFS ( SHORT_PIFS + SHORT_SLOT_TIME ) -#define EIFS ( SIFS + (8 * (IEEE80211_HEADER + ACK_SIZE)) ) - -/* - * IEEE802.11 header defines - */ -static inline int is_rts_frame(u16 fc) -{ - return !!(((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_RTS)); -} - -static inline int is_cts_frame(u16 fc) -{ - return !!(((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_CTS)); -} - -static inline int is_probe_resp(u16 fc) -{ - return !!(((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PROBE_RESP)); -} - -/* - * Chipset identification - * The chipset on the device is composed of a RT and RF chip. - * The chipset combination is important for determining device capabilities. - */ -struct rt2x00_chip { - u16 rt; -#define RT2460 0x0101 -#define RT2560 0x0201 -#define RT2570 0x1201 -#define RT2561s 0x0301 /* Turbo */ -#define RT2561 0x0302 -#define RT2661 0x0401 -#define RT2571 0x1300 - - u16 rf; - u32 rev; -}; - -/* - * RF register values that belong to a particular channel. - */ -struct rf_channel { - int channel; - u32 rf1; - u32 rf2; - u32 rf3; - u32 rf4; -}; - -/* - * To optimize the quality of the link we need to store - * the quality of received frames and periodically - * optimize the link. - */ -struct link { - /* - * Link tuner counter - * The number of times the link has been tuned - * since the radio has been switched on. - */ - u32 count; - - /* - * Statistics required for Link tuning. - * For the average RSSI value we use the "Walking average" approach. - * When adding RSSI to the average value the following calculation - * is needed: - * - * avg_rssi = ((avg_rssi * 7) + rssi) / 8; - * - * The advantage of this approach is that we only need 1 variable - * to store the average in (No need for a count and a total). - * But more importantly, normal average values will over time - * move less and less towards newly added values this results - * that with link tuning, the device can have a very good RSSI - * for a few minutes but when the device is moved away from the AP - * the average will not decrease fast enough to compensate. - * The walking average compensates this and will move towards - * the new values correctly allowing a effective link tuning. - */ - int avg_rssi; - int vgc_level; - int false_cca; - - /* - * Statistics required for Signal quality calculation. - * For calculating the Signal quality we have to determine - * the total number of success and failed RX and TX frames. - * After that we also use the average RSSI value to help - * determining the signal quality. - * For the calculation we will use the following algorithm: - * - * rssi_percentage = (avg_rssi * 100) / rssi_offset - * rx_percentage = (rx_success * 100) / rx_total - * tx_percentage = (tx_success * 100) / tx_total - * avg_signal = ((WEIGHT_RSSI * avg_rssi) + - * (WEIGHT_TX * tx_percentage) + - * (WEIGHT_RX * rx_percentage)) / 100 - * - * This value should then be checked to not be greated then 100. - */ - int rx_percentage; - int rx_success; - int rx_failed; - int tx_percentage; - int tx_success; - int tx_failed; -#define WEIGHT_RSSI 20 -#define WEIGHT_RX 40 -#define WEIGHT_TX 40 - - /* - * Work structure for scheduling periodic link tuning. - */ - struct delayed_work work; -}; - -/* - * Clear all counters inside the link structure. - * This can be easiest achieved by memsetting everything - * except for the work structure at the end. - */ -static inline void rt2x00_clear_link(struct link *link) -{ - memset(link, 0x00, sizeof(*link) - sizeof(link->work)); - link->rx_percentage = 50; - link->tx_percentage = 50; -} - -/* - * Update the rssi using the walking average approach. - */ -static inline void rt2x00_update_link_rssi(struct link *link, int rssi) -{ - if (!link->avg_rssi) - link->avg_rssi = rssi; - else - link->avg_rssi = ((link->avg_rssi * 7) + rssi) / 8; -} - -/* - * When the avg_rssi is unset or no frames have been received), - * we need to return the default value which needs to be less - * than -80 so the device will select the maximum sensitivity. - */ -static inline int rt2x00_get_link_rssi(struct link *link) -{ - return (link->avg_rssi && link->rx_success) ? link->avg_rssi : -128; -} - -/* - * Interface structure - * Configuration details about the current interface. - */ -struct interface { - /* - * Interface identification. The value is assigned - * to us by the 80211 stack, and is used to request - * new beacons. - */ - int id; - - /* - * Current working type (IEEE80211_IF_TYPE_*). - * When set to INVALID_INTERFACE, no interface is configured. - */ - int type; -#define INVALID_INTERFACE IEEE80211_IF_TYPE_INVALID - - /* - * MAC of the device. - */ - u8 mac[ETH_ALEN]; - - /* - * BBSID of the AP to associate with. - */ - u8 bssid[ETH_ALEN]; - - /* - * Store the packet filter mode for the current interface. - */ - unsigned int filter; -}; - -static inline int is_interface_present(struct interface *intf) -{ - return !!intf->id; -} - -static inline int is_interface_type(struct interface *intf, int type) -{ - return intf->type == type; -} - -/* - * Details about the supported modes, rates and channels - * of a particular chipset. This is used by rt2x00lib - * to build the ieee80211_hw_mode array for mac80211. - */ -struct hw_mode_spec { - /* - * Number of modes, rates and channels. - */ - int num_modes; - int num_rates; - int num_channels; - - /* - * txpower values. - */ - const u8 *tx_power_a; - const u8 *tx_power_bg; - u8 tx_power_default; - - /* - * Device/chipset specific value. - */ - const struct rf_channel *channels; -}; - -/* - * Configuration structure wrapper around the - * mac80211 configuration structure. - * When mac80211 configures the driver, rt2x00lib - * can precalculate values which are equal for all - * rt2x00 drivers. Those values can be stored in here. - */ -struct rt2x00lib_conf { - struct ieee80211_conf *conf; - struct rf_channel rf; - - int phymode; - - int basic_rates; - int slot_time; - - short sifs; - short pifs; - short difs; - short eifs; -}; - -/* - * rt2x00lib callback functions. - */ -struct rt2x00lib_ops { - /* - * Interrupt handlers. - */ - irq_handler_t irq_handler; - - /* - * Device init handlers. - */ - int (*probe_hw) (struct rt2x00_dev *rt2x00dev); - char *(*get_firmware_name) (struct rt2x00_dev *rt2x00dev); - int (*load_firmware) (struct rt2x00_dev *rt2x00dev, void *data, - const size_t len); - - /* - * Device initialization/deinitialization handlers. - */ - int (*initialize) (struct rt2x00_dev *rt2x00dev); - void (*uninitialize) (struct rt2x00_dev *rt2x00dev); - - /* - * Radio control handlers. - */ - int (*set_device_state) (struct rt2x00_dev *rt2x00dev, - enum dev_state state); - int (*rfkill_poll) (struct rt2x00_dev *rt2x00dev); - void (*link_stats) (struct rt2x00_dev *rt2x00dev); - void (*reset_tuner) (struct rt2x00_dev *rt2x00dev); - void (*link_tuner) (struct rt2x00_dev *rt2x00dev); - - /* - * TX control handlers - */ - void (*write_tx_desc) (struct rt2x00_dev *rt2x00dev, - struct data_desc *txd, - struct txdata_entry_desc *desc, - struct ieee80211_hdr *ieee80211hdr, - unsigned int length, - struct ieee80211_tx_control *control); - int (*write_tx_data) (struct rt2x00_dev *rt2x00dev, - struct data_ring *ring, struct sk_buff *skb, - struct ieee80211_tx_control *control); - int (*get_tx_data_len) (struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb); - void (*kick_tx_queue) (struct rt2x00_dev *rt2x00dev, - unsigned int queue); - - /* - * RX control handlers - */ - void (*fill_rxdone) (struct data_entry *entry, - struct rxdata_entry_desc *desc); - - /* - * Configuration handlers. - */ - void (*config_mac_addr) (struct rt2x00_dev *rt2x00dev, __le32 *mac); - void (*config_bssid) (struct rt2x00_dev *rt2x00dev, __le32 *bssid); - void (*config_type) (struct rt2x00_dev *rt2x00dev, const int type, - const int tsf_sync); - void (*config_preamble) (struct rt2x00_dev *rt2x00dev, - const int short_preamble, - const int ack_timeout, - const int ack_consume_time); - void (*config) (struct rt2x00_dev *rt2x00dev, const unsigned int flags, - struct rt2x00lib_conf *libconf); -#define CONFIG_UPDATE_PHYMODE ( 1 << 1 ) -#define CONFIG_UPDATE_CHANNEL ( 1 << 2 ) -#define CONFIG_UPDATE_TXPOWER ( 1 << 3 ) -#define CONFIG_UPDATE_ANTENNA ( 1 << 4 ) -#define CONFIG_UPDATE_SLOT_TIME ( 1 << 5 ) -#define CONFIG_UPDATE_BEACON_INT ( 1 << 6 ) -#define CONFIG_UPDATE_ALL 0xffff -}; - -/* - * rt2x00 driver callback operation structure. - */ -struct rt2x00_ops { - const char *name; - const unsigned int rxd_size; - const unsigned int txd_size; - const unsigned int eeprom_size; - const unsigned int rf_size; - const struct rt2x00lib_ops *lib; - const struct ieee80211_ops *hw; -#ifdef CONFIG_RT2X00_LIB_DEBUGFS - const struct rt2x00debug *debugfs; -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -}; - -/* - * rt2x00 device flags - */ -enum rt2x00_flags { - /* - * Device state flags - */ - DEVICE_PRESENT, - DEVICE_REGISTERED_HW, - DEVICE_INITIALIZED, - DEVICE_STARTED, - DEVICE_STARTED_SUSPEND, - DEVICE_ENABLED_RADIO, - DEVICE_DISABLED_RADIO_HW, - - /* - * Driver features - */ - DRIVER_REQUIRE_FIRMWARE, - DRIVER_REQUIRE_BEACON_RING, - - /* - * Driver configuration - */ - CONFIG_SUPPORT_HW_BUTTON, - CONFIG_FRAME_TYPE, - CONFIG_RF_SEQUENCE, - CONFIG_EXTERNAL_LNA_A, - CONFIG_EXTERNAL_LNA_BG, - CONFIG_DOUBLE_ANTENNA, - CONFIG_DISABLE_LINK_TUNING, - CONFIG_SHORT_PREAMBLE, -}; - -/* - * rt2x00 device structure. - */ -struct rt2x00_dev { - /* - * Device structure. - * The structure stored in here depends on the - * system bus (PCI or USB). - * When accessing this variable, the rt2x00dev_{pci,usb} - * macro's should be used for correct typecasting. - */ - void *dev; -#define rt2x00dev_pci(__dev) ( (struct pci_dev*)(__dev)->dev ) -#define rt2x00dev_usb(__dev) ( (struct usb_interface*)(__dev)->dev ) - - /* - * Callback functions. - */ - const struct rt2x00_ops *ops; - - /* - * IEEE80211 control structure. - */ - struct ieee80211_hw *hw; - struct ieee80211_hw_mode *hwmodes; - unsigned int curr_hwmode; -#define HWMODE_B 0 -#define HWMODE_G 1 -#define HWMODE_A 2 - - /* - * rfkill structure for RF state switching support. - * This will only be compiled in when required. - */ -#ifdef CONFIG_RT2X00_LIB_RFKILL - struct rfkill *rfkill; - struct input_polled_dev *poll_dev; -#endif /* CONFIG_RT2X00_LIB_RFKILL */ - - /* - * If enabled, the debugfs interface structures - * required for deregistration of debugfs. - */ -#ifdef CONFIG_RT2X00_LIB_DEBUGFS - const struct rt2x00debug_intf *debugfs_intf; -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ - - /* - * Device flags. - * In these flags the current status and some - * of the device capabilities are stored. - */ - unsigned long flags; - - /* - * Chipset identification. - */ - struct rt2x00_chip chip; - - /* - * hw capability specifications. - */ - struct hw_mode_spec spec; - - /* - * Register pointers - * csr_addr: Base register address. (PCI) - * csr_cache: CSR cache for usb_control_msg. (USB) - */ - void __iomem *csr_addr; - void *csr_cache; - - /* - * Interface configuration. - */ - struct interface interface; - - /* - * Link quality - */ - struct link link; - - /* - * EEPROM data. - */ - __le16 *eeprom; - - /* - * Active RF register values. - * These are stored here so we don't need - * to read the rf registers and can directly - * use this value instead. - * This field should be accessed by using - * rt2x00_rf_read() and rt2x00_rf_write(). - */ - u32 *rf; - - /* - * USB Max frame size (for rt2500usb & rt73usb). - */ - u16 usb_maxpacket; - - /* - * Current TX power value. - */ - u16 tx_power; - - /* - * LED register (for rt61pci & rt73usb). - */ - u16 led_reg; - - /* - * Led mode (LED_MODE_*) - */ - u8 led_mode; - - /* - * Rssi <-> Dbm offset - */ - u8 rssi_offset; - - /* - * Frequency offset (for rt61pci & rt73usb). - */ - u8 freq_offset; - - /* - * Low level statistics which will have - * to be kept up to date while device is running. - */ - struct ieee80211_low_level_stats low_level_stats; - - /* - * RX configuration information. - */ - struct ieee80211_rx_status rx_status; - - /* - * Scheduled work. - */ - struct work_struct beacon_work; - struct work_struct filter_work; - struct work_struct config_work; - - /* - * Data ring arrays for RX, TX and Beacon. - * The Beacon array also contains the Atim ring - * if that is supported by the device. - */ - int data_rings; - struct data_ring *rx; - struct data_ring *tx; - struct data_ring *bcn; - - /* - * Firmware image. - */ - const struct firmware *fw; -}; - -/* - * For-each loop for the ring array. - * All rings have been allocated as a single array, - * this means we can create a very simply loop macro - * that is capable of looping through all rings. - * ring_end(), txring_end() and ring_loop() are helper macro's which - * should not be used directly. Instead the following should be used: - * ring_for_each() - Loops through all rings (RX, TX, Beacon & Atim) - * txring_for_each() - Loops through TX data rings (TX only) - * txringall_for_each() - Loops through all TX rings (TX, Beacon & Atim) - */ -#define ring_end(__dev) \ - &(__dev)->rx[(__dev)->data_rings] - -#define txring_end(__dev) \ - &(__dev)->tx[(__dev)->hw->queues] - -#define ring_loop(__entry, __start, __end) \ - for ((__entry) = (__start); \ - prefetch(&(__entry)[1]), (__entry) != (__end); \ - (__entry) = &(__entry)[1]) - -#define ring_for_each(__dev, __entry) \ - ring_loop(__entry, (__dev)->rx, ring_end(__dev)) - -#define txring_for_each(__dev, __entry) \ - ring_loop(__entry, (__dev)->tx, txring_end(__dev)) - -#define txringall_for_each(__dev, __entry) \ - ring_loop(__entry, (__dev)->tx, ring_end(__dev)) - -/* - * Generic RF access. - * The RF is being accessed by word index. - */ -static inline void rt2x00_rf_read(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 *data) -{ - *data = rt2x00dev->rf[word]; -} - -static inline void rt2x00_rf_write(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 data) -{ - rt2x00dev->rf[word] = data; -} - -/* - * Generic EEPROM access. - * The EEPROM is being accessed by word index. - */ -static inline void *rt2x00_eeprom_addr(const struct rt2x00_dev *rt2x00dev, - const unsigned int word) -{ - return (void *)&rt2x00dev->eeprom[word]; -} - -static inline void rt2x00_eeprom_read(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, u16 *data) -{ - *data = le16_to_cpu(rt2x00dev->eeprom[word]); -} - -static inline void rt2x00_eeprom_write(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, u16 data) -{ - rt2x00dev->eeprom[word] = cpu_to_le16(data); -} - -/* - * Chipset handlers - */ -static inline void rt2x00_set_chip(struct rt2x00_dev *rt2x00dev, - const u16 rt, const u16 rf, const u32 rev) -{ - INFO(rt2x00dev, - "Chipset detected - rt: %04x, rf: %04x, rev: %08x.\n", - rt, rf, rev); - - rt2x00dev->chip.rt = rt; - rt2x00dev->chip.rf = rf; - rt2x00dev->chip.rev = rev; -} - -static inline char rt2x00_rt(const struct rt2x00_chip *chipset, const u16 chip) -{ - return (chipset->rt == chip); -} - -static inline char rt2x00_rf(const struct rt2x00_chip *chipset, const u16 chip) -{ - return (chipset->rf == chip); -} - -static inline u16 rt2x00_rev(const struct rt2x00_chip *chipset) -{ - return chipset->rev; -} - -static inline u16 rt2x00_check_rev(const struct rt2x00_chip *chipset, - const u32 rev) -{ - return (((chipset->rev & 0xffff0) == rev) && - !!(chipset->rev & 0x0000f)); -} - -/* - * Duration calculations - * The rate variable passed is: 100kbs. - * To convert from bytes to bits we multiply size with 8, - * then the size is multiplied with 10 to make the - * real rate -> rate argument correction. - */ -static inline u16 get_duration(const unsigned int size, const u8 rate) -{ - return ((size * 8 * 10) / rate); -} - -static inline u16 get_duration_res(const unsigned int size, const u8 rate) -{ - return ((size * 8 * 10) % rate); -} - -/* - * Library functions. - */ -struct data_ring *rt2x00lib_get_ring(struct rt2x00_dev *rt2x00dev, - const unsigned int queue); - -/* - * Interrupt context handlers. - */ -void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev); -void rt2x00lib_txdone(struct data_entry *entry, - const int status, const int retry); -void rt2x00lib_rxdone(struct data_entry *entry, struct sk_buff *skb, - struct rxdata_entry_desc *desc); - -/* - * TX descriptor initializer - */ -void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct data_desc *txd, - struct ieee80211_hdr *ieee80211hdr, - unsigned int length, - struct ieee80211_tx_control *control); - -/* - * mac80211 handlers. - */ -int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *control); -int rt2x00mac_start(struct ieee80211_hw *hw); -void rt2x00mac_stop(struct ieee80211_hw *hw); -int rt2x00mac_add_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf); -void rt2x00mac_remove_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf); -int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf); -int rt2x00mac_config_interface(struct ieee80211_hw *hw, int if_id, - struct ieee80211_if_conf *conf); -int rt2x00mac_get_stats(struct ieee80211_hw *hw, - struct ieee80211_low_level_stats *stats); -int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw, - struct ieee80211_tx_queue_stats *stats); -void rt2x00mac_erp_ie_changed(struct ieee80211_hw *hw, u8 changes, - int cts_protection, int preamble); -int rt2x00mac_conf_tx(struct ieee80211_hw *hw, int queue, - const struct ieee80211_tx_queue_params *params); - -/* - * Driver allocation handlers. - */ -int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev); -void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev); -#ifdef CONFIG_PM -int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state); -int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev); -#endif /* CONFIG_PM */ - -#endif /* RT2X00_H */ diff --git a/package/rt2x00/src/rt2x00_compat.h b/package/rt2x00/src/rt2x00_compat.h deleted file mode 100644 index 83d4f9904de..00000000000 --- a/package/rt2x00/src/rt2x00_compat.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * RT2X00 Compatability fixes for specific kernels. - */ -#ifndef RT2X00_COMPAT_H -#define RT2X00_COMPAT_H - -/* - * First include the 2 config headers. - * The rt2x00_config.h should overrule - * the kernel configuration. - */ -#include -#include "rt2x00_config.h" - -#include -#include -#include - -/* - * Check minimal requirements. - */ -#if (!defined(CONFIG_MAC80211) && !defined(CONFIG_MAC80211_MODULE)) -#error mac80211 support not enabled in kernel! -#endif - -#if !defined(CONFIG_WLAN_80211) -#error 802.11 wlan card support not enabled in kernel! -#endif - -#if (defined(CONFIG_RT2400PCI) || defined(CONFIG_RT2500PCI) || defined(CONFIG_RT61PCI)) -#if (!defined(CONFIG_PCI) && !defined(CONFIG_PCI_MODULE)) -#error PCI has been disabled in your kernel! -#endif -#if (!defined(CONFIG_EEPROM_93CX6) && !defined(CONFIG_EEPROM_93CX6_MODULE)) -#error EEPROM_93CX6 has been disabled in your kernel! -#endif -#endif - -#if (defined(CONFIG_RT2500USB) || defined(CONFIG_RT73USB)) -#if (!defined(CONFIG_USB) && !defined(CONFIG_USB_MODULE)) -#error USB has been disabled in your kernel! -#endif -#endif - -#if (defined(CONFIG_RT61PCI) || defined(CONFIG_RT73USB)) -#if (!defined(CONFIG_FW_LOADER) && !defined(CONFIG_FW_LOADER_MODULE)) -#error Firmware loading has been disabled in your kernel! -#endif -#if (!defined(CONFIG_CRC_ITU_T) && !defined(CONFIG_CRC_ITU_T_MODULE)) -#error CRC_ITU_T loading has been disabled in your kernel! -#endif -#endif - -#if (defined(CONFIG_RT2X00_DEBUGFS)) -#if (!defined(CONFIG_MAC80211_DEBUGFS) && !defined(CONFIG_MAC80211_DEBUGFS_MODULE)) -#error mac80211 debugfs support has been disabled in your kernel! -#endif -#endif - -#if (defined(CONFIG_RT2400PCI_BUTTON) || defined(CONFIG_RT2500PCI_BUTTON) || defined(CONFIG_RT61PCI_BUTTON)) -#if (!defined(CONFIG_RFKILL) && !defined (CONFIG_RFKILL_MODULE)) -#error RFKILL has been disabled in your kernel! -#endif -#endif - -#endif /* RT2X00_COMPAT_H */ diff --git a/package/rt2x00/src/rt2x00config.c b/package/rt2x00/src/rt2x00config.c deleted file mode 100644 index 12914cf7156..00000000000 --- a/package/rt2x00/src/rt2x00config.c +++ /dev/null @@ -1,205 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2x00lib - Abstract: rt2x00 generic configuration routines. - */ - -/* - * Set enviroment defines for rt2x00.h - */ -#define DRV_NAME "rt2x00lib" - -#include -#include - -#include "rt2x00.h" -#include "rt2x00lib.h" - - -/* - * The MAC and BSSID addressess are simple array of bytes, - * these arrays are little endian, so when sending the addressess - * to the drivers, copy the it into a endian-signed variable. - * - * Note that all devices (except rt2500usb) have 32 bits - * register word sizes. This means that whatever variable we - * pass _must_ be a multiple of 32 bits. Otherwise the device - * might not accept what we are sending to it. - * This will also make it easier for the driver to write - * the data to the device. - * - * Also note that when NULL is passed as address the - * we will send 00:00:00:00:00 to the device to clear the address. - * This will prevent the device being confused when it wants - * to ACK frames or consideres itself associated. - */ -void rt2x00lib_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *mac) -{ - __le32 reg[2]; - - memset(®, 0, sizeof(reg)); - if (mac) - memcpy(®, mac, ETH_ALEN); - - rt2x00dev->ops->lib->config_mac_addr(rt2x00dev, ®[0]); -} - -void rt2x00lib_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid) -{ - __le32 reg[2]; - - memset(®, 0, sizeof(reg)); - if (bssid) - memcpy(®, bssid, ETH_ALEN); - - rt2x00dev->ops->lib->config_bssid(rt2x00dev, ®[0]); -} - -void rt2x00lib_config_type(struct rt2x00_dev *rt2x00dev, const int type) -{ - int tsf_sync; - - switch (type) { - case IEEE80211_IF_TYPE_IBSS: - case IEEE80211_IF_TYPE_AP: - tsf_sync = TSF_SYNC_BEACON; - break; - case IEEE80211_IF_TYPE_STA: - tsf_sync = TSF_SYNC_INFRA; - break; - default: - tsf_sync = TSF_SYNC_NONE; - break; - } - - rt2x00dev->ops->lib->config_type(rt2x00dev, type, tsf_sync); -} - -void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, const int force_config) -{ - struct rt2x00lib_conf libconf; - struct ieee80211_hw_mode *mode; - struct ieee80211_rate *rate; - int flags = 0; - int short_slot_time; - - /* - * In some situations we want to force all configurations - * to be reloaded (When resuming for instance). - */ - if (force_config) { - flags = CONFIG_UPDATE_ALL; - goto config; - } - - /* - * Check which configuration options have been - * updated and should be send to the device. - */ - if (rt2x00dev->rx_status.phymode != conf->phymode) - flags |= CONFIG_UPDATE_PHYMODE; - if (rt2x00dev->rx_status.channel != conf->channel) - flags |= CONFIG_UPDATE_CHANNEL; - if (rt2x00dev->tx_power != conf->power_level) - flags |= CONFIG_UPDATE_TXPOWER; - if (rt2x00dev->rx_status.antenna == conf->antenna_sel_rx) - flags |= CONFIG_UPDATE_ANTENNA; - - /* - * The following configuration options are never - * stored anywhere and will always be updated. - */ - flags |= CONFIG_UPDATE_SLOT_TIME; - flags |= CONFIG_UPDATE_BEACON_INT; - - /* - * We have determined what options should be updated, - * now precalculate device configuration values depending - * on what configuration options need to be updated. - */ -config: - memset(&libconf, 0, sizeof(libconf)); - - if (flags & CONFIG_UPDATE_PHYMODE) { - switch (conf->phymode) { - case MODE_IEEE80211A: - libconf.phymode = HWMODE_A; - break; - case MODE_IEEE80211B: - libconf.phymode = HWMODE_B; - break; - case MODE_IEEE80211G: - libconf.phymode = HWMODE_G; - break; - default: - ERROR(rt2x00dev, - "Attempt to configure unsupported mode (%d)" - "Defaulting to 802.11b", conf->phymode); - libconf.phymode = HWMODE_B; - } - - mode = &rt2x00dev->hwmodes[libconf.phymode]; - rate = &mode->rates[mode->num_rates - 1]; - - libconf.basic_rates = - DEVICE_GET_RATE_FIELD(rate->val, RATEMASK) & DEV_BASIC_RATEMASK; - } - - if (flags & CONFIG_UPDATE_CHANNEL) { - memcpy(&libconf.rf, - &rt2x00dev->spec.channels[conf->channel_val], - sizeof(libconf.rf)); - } - - if (flags & CONFIG_UPDATE_SLOT_TIME) { - short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME; - - libconf.slot_time = - short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME; - libconf.sifs = SIFS; - libconf.pifs = short_slot_time ? SHORT_PIFS : PIFS; - libconf.difs = short_slot_time ? SHORT_DIFS : DIFS; - libconf.eifs = EIFS; - } - - libconf.conf = conf; - - /* - * Start configuration. - */ - rt2x00dev->ops->lib->config(rt2x00dev, flags, &libconf); - - /* - * Some configuration changes affect the link quality - * which means we need to reset the link tuner. - */ - if (flags & (CONFIG_UPDATE_CHANNEL | CONFIG_UPDATE_ANTENNA)) - rt2x00lib_reset_link_tuner(rt2x00dev); - - rt2x00dev->curr_hwmode = libconf.phymode; - rt2x00dev->rx_status.phymode = conf->phymode; - rt2x00dev->rx_status.freq = conf->freq; - rt2x00dev->rx_status.channel = conf->channel; - rt2x00dev->tx_power = conf->power_level; - rt2x00dev->rx_status.antenna = conf->antenna_sel_rx; -} diff --git a/package/rt2x00/src/rt2x00debug.c b/package/rt2x00/src/rt2x00debug.c deleted file mode 100644 index 9275d6f9517..00000000000 --- a/package/rt2x00/src/rt2x00debug.c +++ /dev/null @@ -1,368 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2x00lib - Abstract: rt2x00 debugfs specific routines. - */ - -/* - * Set enviroment defines for rt2x00.h - */ -#define DRV_NAME "rt2x00lib" - -#include -#include -#include -#include - -#include "rt2x00.h" -#include "rt2x00lib.h" - -#define PRINT_LINE_LEN_MAX 32 - -struct rt2x00debug_intf { - /* - * Pointer to driver structure where - * this debugfs entry belongs to. - */ - struct rt2x00_dev *rt2x00dev; - - /* - * Reference to the rt2x00debug structure - * which can be used to communicate with - * the registers. - */ - const struct rt2x00debug *debug; - - /* - * Debugfs entries for: - * - driver folder - * - driver file - * - chipset file - * - device flags file - * - register offset/value files - * - eeprom offset/value files - * - bbp offset/value files - * - rf offset/value files - */ - struct dentry *driver_folder; - struct dentry *driver_entry; - struct dentry *chipset_entry; - struct dentry *dev_flags; - struct dentry *csr_off_entry; - struct dentry *csr_val_entry; - struct dentry *eeprom_off_entry; - struct dentry *eeprom_val_entry; - struct dentry *bbp_off_entry; - struct dentry *bbp_val_entry; - struct dentry *rf_off_entry; - struct dentry *rf_val_entry; - - /* - * Driver and chipset files will use a data buffer - * that has been created in advance. This will simplify - * the code since we can use the debugfs functions. - */ - struct debugfs_blob_wrapper driver_blob; - struct debugfs_blob_wrapper chipset_blob; - - /* - * Requested offset for each register type. - */ - unsigned int offset_csr; - unsigned int offset_eeprom; - unsigned int offset_bbp; - unsigned int offset_rf; -}; - -static int rt2x00debug_file_open(struct inode *inode, struct file *file) -{ - struct rt2x00debug_intf *intf = inode->i_private; - - file->private_data = inode->i_private; - - if (!try_module_get(intf->debug->owner)) - return -EBUSY; - - return 0; -} - -static int rt2x00debug_file_release(struct inode *inode, struct file *file) -{ - struct rt2x00debug_intf *intf = file->private_data; - - module_put(intf->debug->owner); - - return 0; -} - -#define RT2X00DEBUGFS_OPS_READ(__name, __format, __type) \ -static ssize_t rt2x00debug_read_##__name(struct file *file, \ - char __user *buf, \ - size_t length, \ - loff_t *offset) \ -{ \ - struct rt2x00debug_intf *intf = file->private_data; \ - const struct rt2x00debug *debug = intf->debug; \ - char line[16]; \ - size_t size; \ - __type value; \ - \ - if (*offset) \ - return 0; \ - \ - if (intf->offset_##__name >= debug->__name.word_count) \ - return -EINVAL; \ - \ - debug->__name.read(intf->rt2x00dev, \ - intf->offset_##__name, &value); \ - \ - size = sprintf(line, __format, value); \ - \ - if (copy_to_user(buf, line, size)) \ - return -EFAULT; \ - \ - *offset += size; \ - return size; \ -} - -#define RT2X00DEBUGFS_OPS_WRITE(__name, __type) \ -static ssize_t rt2x00debug_write_##__name(struct file *file, \ - const char __user *buf,\ - size_t length, \ - loff_t *offset) \ -{ \ - struct rt2x00debug_intf *intf = file->private_data; \ - const struct rt2x00debug *debug = intf->debug; \ - char line[16]; \ - size_t size; \ - __type value; \ - \ - if (*offset) \ - return 0; \ - \ - if (!capable(CAP_NET_ADMIN)) \ - return -EPERM; \ - \ - if (intf->offset_##__name >= debug->__name.word_count) \ - return -EINVAL; \ - \ - if (copy_from_user(line, buf, length)) \ - return -EFAULT; \ - \ - size = strlen(line); \ - value = simple_strtoul(line, NULL, 0); \ - \ - debug->__name.write(intf->rt2x00dev, \ - intf->offset_##__name, value); \ - \ - *offset += size; \ - return size; \ -} - -#define RT2X00DEBUGFS_OPS(__name, __format, __type) \ -RT2X00DEBUGFS_OPS_READ(__name, __format, __type); \ -RT2X00DEBUGFS_OPS_WRITE(__name, __type); \ - \ -static const struct file_operations rt2x00debug_fop_##__name = {\ - .owner = THIS_MODULE, \ - .read = rt2x00debug_read_##__name, \ - .write = rt2x00debug_write_##__name, \ - .open = rt2x00debug_file_open, \ - .release = rt2x00debug_file_release, \ -}; - -RT2X00DEBUGFS_OPS(csr, "0x%.8x\n", u32); -RT2X00DEBUGFS_OPS(eeprom, "0x%.4x\n", u16); -RT2X00DEBUGFS_OPS(bbp, "0x%.2x\n", u8); -RT2X00DEBUGFS_OPS(rf, "0x%.8x\n", u32); - -static ssize_t rt2x00debug_read_dev_flags(struct file *file, - char __user *buf, - size_t length, - loff_t *offset) -{ - struct rt2x00debug_intf *intf = file->private_data; - char line[16]; - size_t size; - - if (*offset) - return 0; - - size = sprintf(line, "0x%.8x\n", (unsigned int)intf->rt2x00dev->flags); - - if (copy_to_user(buf, line, size)) - return -EFAULT; - - *offset += size; - return size; -} - -static const struct file_operations rt2x00debug_fop_dev_flags = { - .owner = THIS_MODULE, - .read = rt2x00debug_read_dev_flags, - .open = rt2x00debug_file_open, - .release = rt2x00debug_file_release, -}; - -static struct dentry *rt2x00debug_create_file_driver(const char *name, - struct rt2x00debug_intf - *intf, - struct debugfs_blob_wrapper - *blob) -{ - char *data; - - data = kzalloc(3 * PRINT_LINE_LEN_MAX, GFP_KERNEL); - if (!data) - return NULL; - - blob->data = data; - data += sprintf(data, "driver: %s\n", intf->rt2x00dev->ops->name); - data += sprintf(data, "version: %s\n", DRV_VERSION); - data += sprintf(data, "compiled: %s %s\n", __DATE__, __TIME__); - blob->size = strlen(blob->data); - - return debugfs_create_blob(name, S_IRUGO, intf->driver_folder, blob); -} - -static struct dentry *rt2x00debug_create_file_chipset(const char *name, - struct rt2x00debug_intf - *intf, - struct - debugfs_blob_wrapper - *blob) -{ - const struct rt2x00debug *debug = intf->debug; - char *data; - - data = kzalloc(4 * PRINT_LINE_LEN_MAX, GFP_KERNEL); - if (!data) - return NULL; - - blob->data = data; - data += sprintf(data, "csr length: %d\n", debug->csr.word_count); - data += sprintf(data, "eeprom length: %d\n", debug->eeprom.word_count); - data += sprintf(data, "bbp length: %d\n", debug->bbp.word_count); - data += sprintf(data, "rf length: %d\n", debug->rf.word_count); - blob->size = strlen(blob->data); - - return debugfs_create_blob(name, S_IRUGO, intf->driver_folder, blob); -} - -void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) -{ - const struct rt2x00debug *debug = rt2x00dev->ops->debugfs; - struct rt2x00debug_intf *intf; - - intf = kzalloc(sizeof(struct rt2x00debug_intf), GFP_KERNEL); - if (!intf) { - ERROR(rt2x00dev, "Failed to allocate debug handler.\n"); - return; - } - - intf->debug = debug; - intf->rt2x00dev = rt2x00dev; - rt2x00dev->debugfs_intf = intf; - - intf->driver_folder = - debugfs_create_dir(intf->rt2x00dev->ops->name, - rt2x00dev->hw->wiphy->debugfsdir); - if (IS_ERR(intf->driver_folder)) - goto exit; - - intf->driver_entry = - rt2x00debug_create_file_driver("driver", intf, &intf->driver_blob); - if (IS_ERR(intf->driver_entry)) - goto exit; - - intf->chipset_entry = - rt2x00debug_create_file_chipset("chipset", - intf, &intf->chipset_blob); - if (IS_ERR(intf->chipset_entry)) - goto exit; - - intf->dev_flags = debugfs_create_file("dev_flags", S_IRUGO, - intf->driver_folder, intf, - &rt2x00debug_fop_dev_flags); - if (IS_ERR(intf->dev_flags)) - goto exit; - -#define RT2X00DEBUGFS_CREATE_ENTRY(__intf, __name) \ -({ \ - (__intf)->__name##_off_entry = \ - debugfs_create_u32(__stringify(__name) "_offset", \ - S_IRUGO | S_IWUSR, \ - (__intf)->driver_folder, \ - &(__intf)->offset_##__name); \ - if (IS_ERR((__intf)->__name##_off_entry)) \ - goto exit; \ - \ - (__intf)->__name##_val_entry = \ - debugfs_create_file(__stringify(__name) "_value", \ - S_IRUGO | S_IWUSR, \ - (__intf)->driver_folder, \ - (__intf), &rt2x00debug_fop_##__name);\ - if (IS_ERR((__intf)->__name##_val_entry)) \ - goto exit; \ -}) - - RT2X00DEBUGFS_CREATE_ENTRY(intf, csr); - RT2X00DEBUGFS_CREATE_ENTRY(intf, eeprom); - RT2X00DEBUGFS_CREATE_ENTRY(intf, bbp); - RT2X00DEBUGFS_CREATE_ENTRY(intf, rf); - -#undef RT2X00DEBUGFS_CREATE_ENTRY - - return; - -exit: - rt2x00debug_deregister(rt2x00dev); - ERROR(rt2x00dev, "Failed to register debug handler.\n"); - - return; -} - -void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev) -{ - const struct rt2x00debug_intf *intf = rt2x00dev->debugfs_intf; - - if (unlikely(!intf)) - return; - - debugfs_remove(intf->rf_val_entry); - debugfs_remove(intf->rf_off_entry); - debugfs_remove(intf->bbp_val_entry); - debugfs_remove(intf->bbp_off_entry); - debugfs_remove(intf->eeprom_val_entry); - debugfs_remove(intf->eeprom_off_entry); - debugfs_remove(intf->csr_val_entry); - debugfs_remove(intf->csr_off_entry); - debugfs_remove(intf->dev_flags); - debugfs_remove(intf->chipset_entry); - debugfs_remove(intf->driver_entry); - debugfs_remove(intf->driver_folder); - kfree(intf->chipset_blob.data); - kfree(intf->driver_blob.data); - kfree(intf); - - rt2x00dev->debugfs_intf = NULL; -} diff --git a/package/rt2x00/src/rt2x00debug.h b/package/rt2x00/src/rt2x00debug.h deleted file mode 100644 index 860e8fa3a0d..00000000000 --- a/package/rt2x00/src/rt2x00debug.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2x00debug - Abstract: Data structures for the rt2x00debug. - */ - -#ifndef RT2X00DEBUG_H -#define RT2X00DEBUG_H - -struct rt2x00_dev; - -#define RT2X00DEBUGFS_REGISTER_ENTRY(__name, __type) \ -struct reg##__name { \ - void (*read)(const struct rt2x00_dev *rt2x00dev, \ - const unsigned int word, __type *data); \ - void (*write)(const struct rt2x00_dev *rt2x00dev, \ - const unsigned int word, __type data); \ - \ - unsigned int word_size; \ - unsigned int word_count; \ -} __name - -struct rt2x00debug { - /* - * Reference to the modules structure. - */ - struct module *owner; - - /* - * Register access entries. - */ - RT2X00DEBUGFS_REGISTER_ENTRY(csr, u32); - RT2X00DEBUGFS_REGISTER_ENTRY(eeprom, u16); - RT2X00DEBUGFS_REGISTER_ENTRY(bbp, u8); - RT2X00DEBUGFS_REGISTER_ENTRY(rf, u32); -}; - -#endif /* RT2X00DEBUG_H */ diff --git a/package/rt2x00/src/rt2x00dev.c b/package/rt2x00/src/rt2x00dev.c deleted file mode 100644 index ff399f8083e..00000000000 --- a/package/rt2x00/src/rt2x00dev.c +++ /dev/null @@ -1,1202 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2x00lib - Abstract: rt2x00 generic device routines. - */ - -/* - * Set enviroment defines for rt2x00.h - */ -#define DRV_NAME "rt2x00lib" - -#include -#include - -#include "rt2x00.h" -#include "rt2x00lib.h" - -/* - * Ring handler. - */ -struct data_ring *rt2x00lib_get_ring(struct rt2x00_dev *rt2x00dev, - const unsigned int queue) -{ - int beacon = test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags); - - /* - * Check if we are requesting a reqular TX ring, - * or if we are requesting a Beacon or Atim ring. - * For Atim rings, we should check if it is supported. - */ - if (queue < rt2x00dev->hw->queues && rt2x00dev->tx) - return &rt2x00dev->tx[queue]; - - if (!rt2x00dev->bcn || !beacon) - return NULL; - - if (queue == IEEE80211_TX_QUEUE_BEACON) - return &rt2x00dev->bcn[0]; - else if (queue == IEEE80211_TX_QUEUE_AFTER_BEACON) - return &rt2x00dev->bcn[1]; - - return NULL; -} -EXPORT_SYMBOL_GPL(rt2x00lib_get_ring); - -/* - * Link tuning handlers - */ -static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev) -{ - rt2x00_clear_link(&rt2x00dev->link); - - /* - * Reset the link tuner. - */ - rt2x00dev->ops->lib->reset_tuner(rt2x00dev); - - queue_delayed_work(rt2x00dev->hw->workqueue, - &rt2x00dev->link.work, LINK_TUNE_INTERVAL); -} - -static void rt2x00lib_stop_link_tuner(struct rt2x00_dev *rt2x00dev) -{ - cancel_delayed_work_sync(&rt2x00dev->link.work); -} - -void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev) -{ - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) - return; - - rt2x00lib_stop_link_tuner(rt2x00dev); - rt2x00lib_start_link_tuner(rt2x00dev); -} - -/* - * Radio control handlers. - */ -int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) -{ - int status; - - /* - * Don't enable the radio twice. - * And check if the hardware button has been disabled. - */ - if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || - test_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags)) - return 0; - - /* - * Enable radio. - */ - status = rt2x00dev->ops->lib->set_device_state(rt2x00dev, - STATE_RADIO_ON); - if (status) - return status; - - __set_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags); - - /* - * Enable RX. - */ - rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); - - /* - * Start the TX queues. - */ - ieee80211_start_queues(rt2x00dev->hw); - - return 0; -} - -void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev) -{ - if (!__test_and_clear_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) - return; - - /* - * Stop all scheduled work. - */ - if (work_pending(&rt2x00dev->beacon_work)) - cancel_work_sync(&rt2x00dev->beacon_work); - if (work_pending(&rt2x00dev->filter_work)) - cancel_work_sync(&rt2x00dev->filter_work); - if (work_pending(&rt2x00dev->config_work)) - cancel_work_sync(&rt2x00dev->config_work); - - /* - * Stop the TX queues. - */ - ieee80211_stop_queues(rt2x00dev->hw); - - /* - * Disable RX. - */ - rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); - - /* - * Disable radio. - */ - rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_OFF); -} - -void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state) -{ - /* - * When we are disabling the RX, we should also stop the link tuner. - */ - if (state == STATE_RADIO_RX_OFF) - rt2x00lib_stop_link_tuner(rt2x00dev); - - rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); - - /* - * When we are enabling the RX, we should also start the link tuner. - */ - if (state == STATE_RADIO_RX_ON && - is_interface_present(&rt2x00dev->interface)) - rt2x00lib_start_link_tuner(rt2x00dev); -} - -static void rt2x00lib_precalculate_link_signal(struct link *link) -{ - if (link->rx_failed || link->rx_success) - link->rx_percentage = - (link->rx_success * 100) / - (link->rx_failed + link->rx_success); - else - link->rx_percentage = 50; - - if (link->tx_failed || link->tx_success) - link->tx_percentage = - (link->tx_success * 100) / - (link->tx_failed + link->tx_success); - else - link->tx_percentage = 50; - - link->rx_success = 0; - link->rx_failed = 0; - link->tx_success = 0; - link->tx_failed = 0; -} - -static int rt2x00lib_calculate_link_signal(struct rt2x00_dev *rt2x00dev, - int rssi) -{ - int rssi_percentage = 0; - int signal; - - /* - * We need a positive value for the RSSI. - */ - if (rssi < 0) - rssi += rt2x00dev->rssi_offset; - - /* - * Calculate the different percentages, - * which will be used for the signal. - */ - if (rt2x00dev->rssi_offset) - rssi_percentage = (rssi * 100) / rt2x00dev->rssi_offset; - - /* - * Add the individual percentages and use the WEIGHT - * defines to calculate the current link signal. - */ - signal = ((WEIGHT_RSSI * rssi_percentage) + - (WEIGHT_TX * rt2x00dev->link.tx_percentage) + - (WEIGHT_RX * rt2x00dev->link.rx_percentage)) / 100; - - return (signal > 100) ? 100 : signal; -} - -static void rt2x00lib_link_tuner(struct work_struct *work) -{ - struct rt2x00_dev *rt2x00dev = - container_of(work, struct rt2x00_dev, link.work.work); - - /* - * When the radio is shutting down we should - * immediately cease all link tuning. - */ - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) - return; - - /* - * Update statistics. - */ - rt2x00dev->ops->lib->link_stats(rt2x00dev); - - rt2x00dev->low_level_stats.dot11FCSErrorCount += - rt2x00dev->link.rx_failed; - - /* - * Only perform the link tuning when Link tuning - * has been enabled (This could have been disabled from the EEPROM). - */ - if (!test_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags)) - rt2x00dev->ops->lib->link_tuner(rt2x00dev); - - /* - * Precalculate a portion of the link signal which is - * in based on the tx/rx success/failure counters. - */ - rt2x00lib_precalculate_link_signal(&rt2x00dev->link); - - /* - * Increase tuner counter, and reschedule the next link tuner run. - */ - rt2x00dev->link.count++; - queue_delayed_work(rt2x00dev->hw->workqueue, &rt2x00dev->link.work, - LINK_TUNE_INTERVAL); -} - -static void rt2x00lib_packetfilter_scheduled(struct work_struct *work) -{ - struct rt2x00_dev *rt2x00dev = - container_of(work, struct rt2x00_dev, filter_work); - unsigned int filter = rt2x00dev->interface.filter; - - /* - * Since we had stored the filter inside interface.filter, - * we should now clear that field. Otherwise the driver will - * assume nothing has changed (*total_flags will be compared - * to interface.filter to determine if any action is required). - */ - rt2x00dev->interface.filter = 0; - - rt2x00dev->ops->hw->configure_filter(rt2x00dev->hw, - filter, &filter, 0, NULL); -} - -static void rt2x00lib_configuration_scheduled(struct work_struct *work) -{ - struct rt2x00_dev *rt2x00dev = - container_of(work, struct rt2x00_dev, config_work); - int preamble = !test_bit(CONFIG_SHORT_PREAMBLE, &rt2x00dev->flags); - - rt2x00mac_erp_ie_changed(rt2x00dev->hw, - IEEE80211_ERP_CHANGE_PREAMBLE, 0, preamble); -} - -/* - * Interrupt context handlers. - */ -static void rt2x00lib_beacondone_scheduled(struct work_struct *work) -{ - struct rt2x00_dev *rt2x00dev = - container_of(work, struct rt2x00_dev, beacon_work); - struct data_ring *ring = - rt2x00lib_get_ring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); - struct data_entry *entry = rt2x00_get_data_entry(ring); - struct sk_buff *skb; - - skb = ieee80211_beacon_get(rt2x00dev->hw, - rt2x00dev->interface.id, - &entry->tx_status.control); - if (!skb) - return; - - rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw, skb, - &entry->tx_status.control); - - dev_kfree_skb(skb); -} - -void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev) -{ - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) - return; - - queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->beacon_work); -} -EXPORT_SYMBOL_GPL(rt2x00lib_beacondone); - -void rt2x00lib_txdone(struct data_entry *entry, - const int status, const int retry) -{ - struct rt2x00_dev *rt2x00dev = entry->ring->rt2x00dev; - struct ieee80211_tx_status *tx_status = &entry->tx_status; - struct ieee80211_low_level_stats *stats = &rt2x00dev->low_level_stats; - int success = !!(status == TX_SUCCESS || status == TX_SUCCESS_RETRY); - int fail = !!(status == TX_FAIL_RETRY || status == TX_FAIL_INVALID || - status == TX_FAIL_OTHER); - - /* - * Update TX statistics. - */ - tx_status->flags = 0; - tx_status->ack_signal = 0; - tx_status->excessive_retries = (status == TX_FAIL_RETRY); - tx_status->retry_count = retry; - rt2x00dev->link.tx_success += success; - rt2x00dev->link.tx_failed += retry + fail; - - if (!(tx_status->control.flags & IEEE80211_TXCTL_NO_ACK)) { - if (success) - tx_status->flags |= IEEE80211_TX_STATUS_ACK; - else - stats->dot11ACKFailureCount++; - } - - tx_status->queue_length = entry->ring->stats.limit; - tx_status->queue_number = tx_status->control.queue; - - if (tx_status->control.flags & IEEE80211_TXCTL_USE_RTS_CTS) { - if (success) - stats->dot11RTSSuccessCount++; - else - stats->dot11RTSFailureCount++; - } - - /* - * Send the tx_status to mac80211, - * that method also cleans up the skb structure. - */ - ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb, tx_status); - entry->skb = NULL; -} -EXPORT_SYMBOL_GPL(rt2x00lib_txdone); - -void rt2x00lib_rxdone(struct data_entry *entry, struct sk_buff *skb, - struct rxdata_entry_desc *desc) -{ - struct rt2x00_dev *rt2x00dev = entry->ring->rt2x00dev; - struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status; - struct ieee80211_hw_mode *mode; - struct ieee80211_rate *rate; - unsigned int i; - int val = 0; - - /* - * Update RX statistics. - */ - mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode]; - for (i = 0; i < mode->num_rates; i++) { - rate = &mode->rates[i]; - - /* - * When frame was received with an OFDM bitrate, - * the signal is the PLCP value. If it was received with - * a CCK bitrate the signal is the rate in 0.5kbit/s. - */ - if (!desc->ofdm) - val = DEVICE_GET_RATE_FIELD(rate->val, RATE); - else - val = DEVICE_GET_RATE_FIELD(rate->val, PLCP); - - if (val == desc->signal) { - val = rate->val; - break; - } - } - - rt2x00_update_link_rssi(&rt2x00dev->link, desc->rssi); - rt2x00dev->link.rx_success++; - rx_status->rate = val; - rx_status->signal = - rt2x00lib_calculate_link_signal(rt2x00dev, desc->rssi); - rx_status->ssi = desc->rssi; - rx_status->flag = desc->flags; - - /* - * Send frame to mac80211 - */ - ieee80211_rx_irqsafe(rt2x00dev->hw, skb, rx_status); -} -EXPORT_SYMBOL_GPL(rt2x00lib_rxdone); - -/* - * TX descriptor initializer - */ -void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct data_desc *txd, - struct ieee80211_hdr *ieee80211hdr, - unsigned int length, - struct ieee80211_tx_control *control) -{ - struct txdata_entry_desc desc; - struct data_ring *ring; - int tx_rate; - int bitrate; - int duration; - int residual; - u16 frame_control; - u16 seq_ctrl; - - /* - * Make sure the descriptor is properly cleared. - */ - memset(&desc, 0x00, sizeof(desc)); - - /* - * Get ring pointer, if we fail to obtain the - * correct ring, then use the first TX ring. - */ - ring = rt2x00lib_get_ring(rt2x00dev, control->queue); - if (!ring) - ring = rt2x00lib_get_ring(rt2x00dev, IEEE80211_TX_QUEUE_DATA0); - - desc.cw_min = ring->tx_params.cw_min; - desc.cw_max = ring->tx_params.cw_max; - desc.aifs = ring->tx_params.aifs; - - /* - * Identify queue - */ - if (control->queue < rt2x00dev->hw->queues) - desc.queue = control->queue; - else if (control->queue == IEEE80211_TX_QUEUE_BEACON || - control->queue == IEEE80211_TX_QUEUE_AFTER_BEACON) - desc.queue = QUEUE_MGMT; - else - desc.queue = QUEUE_OTHER; - - /* - * Read required fields from ieee80211 header. - */ - frame_control = le16_to_cpu(ieee80211hdr->frame_control); - seq_ctrl = le16_to_cpu(ieee80211hdr->seq_ctrl); - - tx_rate = control->tx_rate; - - /* - * Check if this is a RTS/CTS frame - */ - if (is_rts_frame(frame_control) || is_cts_frame(frame_control)) { - __set_bit(ENTRY_TXD_BURST, &desc.flags); - if (is_rts_frame(frame_control)) - __set_bit(ENTRY_TXD_RTS_FRAME, &desc.flags); - if (control->rts_cts_rate) - tx_rate = control->rts_cts_rate; - } - - /* - * Check for OFDM - */ - if (DEVICE_GET_RATE_FIELD(tx_rate, RATEMASK) & DEV_OFDM_RATEMASK) - __set_bit(ENTRY_TXD_OFDM_RATE, &desc.flags); - - /* - * Check if more fragments are pending - */ - if (ieee80211_get_morefrag(ieee80211hdr)) { - __set_bit(ENTRY_TXD_BURST, &desc.flags); - __set_bit(ENTRY_TXD_MORE_FRAG, &desc.flags); - } - - /* - * Beacons and probe responses require the tsf timestamp - * to be inserted into the frame. - */ - if (control->queue == IEEE80211_TX_QUEUE_BEACON || - is_probe_resp(frame_control)) - __set_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc.flags); - - /* - * Determine with what IFS priority this frame should be send. - * Set ifs to IFS_SIFS when the this is not the first fragment, - * or this fragment came after RTS/CTS. - */ - if ((seq_ctrl & IEEE80211_SCTL_FRAG) > 0 || - test_bit(ENTRY_TXD_RTS_FRAME, &desc.flags)) - desc.ifs = IFS_SIFS; - else - desc.ifs = IFS_BACKOFF; - - /* - * PLCP setup - * Length calculation depends on OFDM/CCK rate. - */ - desc.signal = DEVICE_GET_RATE_FIELD(tx_rate, PLCP); - desc.service = 0x04; - - if (test_bit(ENTRY_TXD_OFDM_RATE, &desc.flags)) { - desc.length_high = ((length + FCS_LEN) >> 6) & 0x3f; - desc.length_low = ((length + FCS_LEN) & 0x3f); - } else { - bitrate = DEVICE_GET_RATE_FIELD(tx_rate, RATE); - - /* - * Convert length to microseconds. - */ - residual = get_duration_res(length + FCS_LEN, bitrate); - duration = get_duration(length + FCS_LEN, bitrate); - - if (residual != 0) { - duration++; - - /* - * Check if we need to set the Length Extension - */ - if (bitrate == 110 && residual <= 30) - desc.service |= 0x80; - } - - desc.length_high = (duration >> 8) & 0xff; - desc.length_low = duration & 0xff; - - /* - * When preamble is enabled we should set the - * preamble bit for the signal. - */ - if (DEVICE_GET_RATE_FIELD(tx_rate, PREAMBLE)) - desc.signal |= 0x08; - } - - rt2x00dev->ops->lib->write_tx_desc(rt2x00dev, txd, &desc, - ieee80211hdr, length, control); -} -EXPORT_SYMBOL_GPL(rt2x00lib_write_tx_desc); - -/* - * Driver initialization handlers. - */ -static void rt2x00lib_channel(struct ieee80211_channel *entry, - const int channel, const int tx_power, - const int value) -{ - entry->chan = channel; - if (channel <= 14) - entry->freq = 2407 + (5 * channel); - else - entry->freq = 5000 + (5 * channel); - entry->val = value; - entry->flag = - IEEE80211_CHAN_W_IBSS | - IEEE80211_CHAN_W_ACTIVE_SCAN | - IEEE80211_CHAN_W_SCAN; - entry->power_level = tx_power; - entry->antenna_max = 0xff; -} - -static void rt2x00lib_rate(struct ieee80211_rate *entry, - const int rate, const int mask, - const int plcp, const int flags) -{ - entry->rate = rate; - entry->val = - DEVICE_SET_RATE_FIELD(rate, RATE) | - DEVICE_SET_RATE_FIELD(mask, RATEMASK) | - DEVICE_SET_RATE_FIELD(plcp, PLCP); - entry->flags = flags; - entry->val2 = entry->val; - if (entry->flags & IEEE80211_RATE_PREAMBLE2) - entry->val2 |= DEVICE_SET_RATE_FIELD(1, PREAMBLE); - entry->min_rssi_ack = 0; - entry->min_rssi_ack_delta = 0; -} - -static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev, - struct hw_mode_spec *spec) -{ - struct ieee80211_hw *hw = rt2x00dev->hw; - struct ieee80211_hw_mode *hwmodes; - struct ieee80211_channel *channels; - struct ieee80211_rate *rates; - unsigned int i; - unsigned char tx_power; - - hwmodes = kzalloc(sizeof(*hwmodes) * spec->num_modes, GFP_KERNEL); - if (!hwmodes) - goto exit; - - channels = kzalloc(sizeof(*channels) * spec->num_channels, GFP_KERNEL); - if (!channels) - goto exit_free_modes; - - rates = kzalloc(sizeof(*rates) * spec->num_rates, GFP_KERNEL); - if (!rates) - goto exit_free_channels; - - /* - * Initialize Rate list. - */ - rt2x00lib_rate(&rates[0], 10, DEV_RATEMASK_1MB, - 0x00, IEEE80211_RATE_CCK); - rt2x00lib_rate(&rates[1], 20, DEV_RATEMASK_2MB, - 0x01, IEEE80211_RATE_CCK_2); - rt2x00lib_rate(&rates[2], 55, DEV_RATEMASK_5_5MB, - 0x02, IEEE80211_RATE_CCK_2); - rt2x00lib_rate(&rates[3], 110, DEV_RATEMASK_11MB, - 0x03, IEEE80211_RATE_CCK_2); - - if (spec->num_rates > 4) { - rt2x00lib_rate(&rates[4], 60, DEV_RATEMASK_6MB, - 0x0b, IEEE80211_RATE_OFDM); - rt2x00lib_rate(&rates[5], 90, DEV_RATEMASK_9MB, - 0x0f, IEEE80211_RATE_OFDM); - rt2x00lib_rate(&rates[6], 120, DEV_RATEMASK_12MB, - 0x0a, IEEE80211_RATE_OFDM); - rt2x00lib_rate(&rates[7], 180, DEV_RATEMASK_18MB, - 0x0e, IEEE80211_RATE_OFDM); - rt2x00lib_rate(&rates[8], 240, DEV_RATEMASK_24MB, - 0x09, IEEE80211_RATE_OFDM); - rt2x00lib_rate(&rates[9], 360, DEV_RATEMASK_36MB, - 0x0d, IEEE80211_RATE_OFDM); - rt2x00lib_rate(&rates[10], 480, DEV_RATEMASK_48MB, - 0x08, IEEE80211_RATE_OFDM); - rt2x00lib_rate(&rates[11], 540, DEV_RATEMASK_54MB, - 0x0c, IEEE80211_RATE_OFDM); - } - - /* - * Initialize Channel list. - */ - for (i = 0; i < spec->num_channels; i++) { - if (spec->channels[i].channel <= 14) - tx_power = spec->tx_power_bg[i]; - else if (spec->tx_power_a) - tx_power = spec->tx_power_a[i]; - else - tx_power = spec->tx_power_default; - - rt2x00lib_channel(&channels[i], - spec->channels[i].channel, tx_power, i); - } - - /* - * Intitialize 802.11b - * Rates: CCK. - * Channels: OFDM. - */ - if (spec->num_modes > HWMODE_B) { - hwmodes[HWMODE_B].mode = MODE_IEEE80211B; - hwmodes[HWMODE_B].num_channels = 14; - hwmodes[HWMODE_B].num_rates = 4; - hwmodes[HWMODE_B].channels = channels; - hwmodes[HWMODE_B].rates = rates; - } - - /* - * Intitialize 802.11g - * Rates: CCK, OFDM. - * Channels: OFDM. - */ - if (spec->num_modes > HWMODE_G) { - hwmodes[HWMODE_G].mode = MODE_IEEE80211G; - hwmodes[HWMODE_G].num_channels = 14; - hwmodes[HWMODE_G].num_rates = spec->num_rates; - hwmodes[HWMODE_G].channels = channels; - hwmodes[HWMODE_G].rates = rates; - } - - /* - * Intitialize 802.11a - * Rates: OFDM. - * Channels: OFDM, UNII, HiperLAN2. - */ - if (spec->num_modes > HWMODE_A) { - hwmodes[HWMODE_A].mode = MODE_IEEE80211A; - hwmodes[HWMODE_A].num_channels = spec->num_channels - 14; - hwmodes[HWMODE_A].num_rates = spec->num_rates - 4; - hwmodes[HWMODE_A].channels = &channels[14]; - hwmodes[HWMODE_A].rates = &rates[4]; - } - - if (spec->num_modes > HWMODE_G && - ieee80211_register_hwmode(hw, &hwmodes[HWMODE_G])) - goto exit_free_rates; - - if (spec->num_modes > HWMODE_B && - ieee80211_register_hwmode(hw, &hwmodes[HWMODE_B])) - goto exit_free_rates; - - if (spec->num_modes > HWMODE_A && - ieee80211_register_hwmode(hw, &hwmodes[HWMODE_A])) - goto exit_free_rates; - - rt2x00dev->hwmodes = hwmodes; - - return 0; - -exit_free_rates: - kfree(rates); - -exit_free_channels: - kfree(channels); - -exit_free_modes: - kfree(hwmodes); - -exit: - ERROR(rt2x00dev, "Allocation ieee80211 modes failed.\n"); - return -ENOMEM; -} - -static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev) -{ - if (test_bit(DEVICE_REGISTERED_HW, &rt2x00dev->flags)) - ieee80211_unregister_hw(rt2x00dev->hw); - - if (likely(rt2x00dev->hwmodes)) { - kfree(rt2x00dev->hwmodes->channels); - kfree(rt2x00dev->hwmodes->rates); - kfree(rt2x00dev->hwmodes); - rt2x00dev->hwmodes = NULL; - } -} - -static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) -{ - struct hw_mode_spec *spec = &rt2x00dev->spec; - int status; - - /* - * Initialize HW modes. - */ - status = rt2x00lib_probe_hw_modes(rt2x00dev, spec); - if (status) - return status; - - /* - * Register HW. - */ - status = ieee80211_register_hw(rt2x00dev->hw); - if (status) { - rt2x00lib_remove_hw(rt2x00dev); - return status; - } - - __set_bit(DEVICE_REGISTERED_HW, &rt2x00dev->flags); - - return 0; -} - -/* - * Initialization/uninitialization handlers. - */ -static int rt2x00lib_alloc_entries(struct data_ring *ring, - const u16 max_entries, const u16 data_size, - const u16 desc_size) -{ - struct data_entry *entry; - unsigned int i; - - ring->stats.limit = max_entries; - ring->data_size = data_size; - ring->desc_size = desc_size; - - /* - * Allocate all ring entries. - */ - entry = kzalloc(ring->stats.limit * sizeof(*entry), GFP_KERNEL); - if (!entry) - return -ENOMEM; - - for (i = 0; i < ring->stats.limit; i++) { - entry[i].flags = 0; - entry[i].ring = ring; - entry[i].skb = NULL; - } - - ring->entry = entry; - - return 0; -} - -static int rt2x00lib_alloc_ring_entries(struct rt2x00_dev *rt2x00dev) -{ - struct data_ring *ring; - - /* - * Allocate the RX ring. - */ - if (rt2x00lib_alloc_entries(rt2x00dev->rx, RX_ENTRIES, DATA_FRAME_SIZE, - rt2x00dev->ops->rxd_size)) - return -ENOMEM; - - /* - * First allocate the TX rings. - */ - txring_for_each(rt2x00dev, ring) { - if (rt2x00lib_alloc_entries(ring, TX_ENTRIES, DATA_FRAME_SIZE, - rt2x00dev->ops->txd_size)) - return -ENOMEM; - } - - if (!test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags)) - return 0; - - /* - * Allocate the BEACON ring. - */ - if (rt2x00lib_alloc_entries(&rt2x00dev->bcn[0], BEACON_ENTRIES, - MGMT_FRAME_SIZE, rt2x00dev->ops->txd_size)) - return -ENOMEM; - - /* - * Allocate the Atim ring. - */ - if (rt2x00lib_alloc_entries(&rt2x00dev->bcn[1], ATIM_ENTRIES, - DATA_FRAME_SIZE, rt2x00dev->ops->txd_size)) - return -ENOMEM; - - return 0; -} - -static void rt2x00lib_free_ring_entries(struct rt2x00_dev *rt2x00dev) -{ - struct data_ring *ring; - - ring_for_each(rt2x00dev, ring) { - kfree(ring->entry); - ring->entry = NULL; - } -} - -void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev) -{ - if (!__test_and_clear_bit(DEVICE_INITIALIZED, &rt2x00dev->flags)) - return; - - /* - * Unregister rfkill. - */ - rt2x00rfkill_unregister(rt2x00dev); - - /* - * Allow the HW to uninitialize. - */ - rt2x00dev->ops->lib->uninitialize(rt2x00dev); - - /* - * Free allocated ring entries. - */ - rt2x00lib_free_ring_entries(rt2x00dev); -} - -int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev) -{ - int status; - - if (test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags)) - return 0; - - /* - * Allocate all ring entries. - */ - status = rt2x00lib_alloc_ring_entries(rt2x00dev); - if (status) { - ERROR(rt2x00dev, "Ring entries allocation failed.\n"); - return status; - } - - /* - * Initialize the device. - */ - status = rt2x00dev->ops->lib->initialize(rt2x00dev); - if (status) - goto exit; - - __set_bit(DEVICE_INITIALIZED, &rt2x00dev->flags); - - /* - * Register the rfkill handler. - */ - status = rt2x00rfkill_register(rt2x00dev); - if (status) - goto exit_unitialize; - - return 0; - -exit_unitialize: - rt2x00lib_uninitialize(rt2x00dev); - -exit: - rt2x00lib_free_ring_entries(rt2x00dev); - - return status; -} - -/* - * driver allocation handlers. - */ -static int rt2x00lib_alloc_rings(struct rt2x00_dev *rt2x00dev) -{ - struct data_ring *ring; - - /* - * We need the following rings: - * RX: 1 - * TX: hw->queues - * Beacon: 1 (if required) - * Atim: 1 (if required) - */ - rt2x00dev->data_rings = 1 + rt2x00dev->hw->queues + - (2 * test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags)); - - ring = kzalloc(rt2x00dev->data_rings * sizeof(*ring), GFP_KERNEL); - if (!ring) { - ERROR(rt2x00dev, "Ring allocation failed.\n"); - return -ENOMEM; - } - - /* - * Initialize pointers - */ - rt2x00dev->rx = ring; - rt2x00dev->tx = &rt2x00dev->rx[1]; - if (test_bit(DRIVER_REQUIRE_BEACON_RING, &rt2x00dev->flags)) - rt2x00dev->bcn = &rt2x00dev->tx[rt2x00dev->hw->queues]; - - /* - * Initialize ring parameters. - * cw_min: 2^5 = 32. - * cw_max: 2^10 = 1024. - */ - ring_for_each(rt2x00dev, ring) { - ring->rt2x00dev = rt2x00dev; - ring->tx_params.aifs = 2; - ring->tx_params.cw_min = 5; - ring->tx_params.cw_max = 10; - } - - return 0; -} - -static void rt2x00lib_free_rings(struct rt2x00_dev *rt2x00dev) -{ - kfree(rt2x00dev->rx); - rt2x00dev->rx = NULL; - rt2x00dev->tx = NULL; - rt2x00dev->bcn = NULL; -} - -int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) -{ - int retval = -ENOMEM; - - /* - * Let the driver probe the device to detect the capabilities. - */ - retval = rt2x00dev->ops->lib->probe_hw(rt2x00dev); - if (retval) { - ERROR(rt2x00dev, "Failed to allocate device.\n"); - goto exit; - } - - /* - * Initialize configuration work. - */ - INIT_WORK(&rt2x00dev->beacon_work, rt2x00lib_beacondone_scheduled); - INIT_WORK(&rt2x00dev->filter_work, rt2x00lib_packetfilter_scheduled); - INIT_WORK(&rt2x00dev->config_work, rt2x00lib_configuration_scheduled); - INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00lib_link_tuner); - - /* - * Reset current working type. - */ - rt2x00dev->interface.type = INVALID_INTERFACE; - - /* - * Allocate ring array. - */ - retval = rt2x00lib_alloc_rings(rt2x00dev); - if (retval) - goto exit; - - /* - * Initialize ieee80211 structure. - */ - retval = rt2x00lib_probe_hw(rt2x00dev); - if (retval) { - ERROR(rt2x00dev, "Failed to initialize hw.\n"); - goto exit; - } - - /* - * Allocatie rfkill. - */ - retval = rt2x00rfkill_allocate(rt2x00dev); - if (retval) - goto exit; - - /* - * Open the debugfs entry. - */ - rt2x00debug_register(rt2x00dev); - - __set_bit(DEVICE_PRESENT, &rt2x00dev->flags); - - return 0; - -exit: - rt2x00lib_remove_dev(rt2x00dev); - - return retval; -} -EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev); - -void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev) -{ - __clear_bit(DEVICE_PRESENT, &rt2x00dev->flags); - - /* - * Disable radio. - */ - rt2x00lib_disable_radio(rt2x00dev); - - /* - * Uninitialize device. - */ - rt2x00lib_uninitialize(rt2x00dev); - - /* - * Close debugfs entry. - */ - rt2x00debug_deregister(rt2x00dev); - - /* - * Free rfkill - */ - rt2x00rfkill_free(rt2x00dev); - - /* - * Free ieee80211_hw memory. - */ - rt2x00lib_remove_hw(rt2x00dev); - - /* - * Free firmware image. - */ - rt2x00lib_free_firmware(rt2x00dev); - - /* - * Free ring structures. - */ - rt2x00lib_free_rings(rt2x00dev); -} -EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev); - -/* - * Device state handlers - */ -#ifdef CONFIG_PM -int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state) -{ - int retval; - - NOTICE(rt2x00dev, "Going to sleep.\n"); - __clear_bit(DEVICE_PRESENT, &rt2x00dev->flags); - - /* - * Only continue if mac80211 has open interfaces. - */ - if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags)) - goto exit; - __set_bit(DEVICE_STARTED_SUSPEND, &rt2x00dev->flags); - - /* - * Disable radio and unitialize all items - * that must be recreated on resume. - */ - rt2x00mac_stop(rt2x00dev->hw); - rt2x00lib_uninitialize(rt2x00dev); - rt2x00debug_deregister(rt2x00dev); - -exit: - /* - * Set device mode to sleep for power management. - */ - retval = rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP); - if (retval) - return retval; - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00lib_suspend); - -int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) -{ - struct interface *intf = &rt2x00dev->interface; - int retval; - - NOTICE(rt2x00dev, "Waking up.\n"); - __set_bit(DEVICE_PRESENT, &rt2x00dev->flags); - - /* - * Open the debugfs entry. - */ - rt2x00debug_register(rt2x00dev); - - /* - * Only continue if mac80211 had open interfaces. - */ - if (!__test_and_clear_bit(DEVICE_STARTED_SUSPEND, &rt2x00dev->flags)) - return 0; - - /* - * Reinitialize device and all active interfaces. - */ - retval = rt2x00mac_start(rt2x00dev->hw); - if (retval) - goto exit; - - /* - * Reconfigure device. - */ - rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf, 1); - if (!rt2x00dev->hw->conf.radio_enabled) - rt2x00lib_disable_radio(rt2x00dev); - - rt2x00lib_config_mac_addr(rt2x00dev, intf->mac); - rt2x00lib_config_bssid(rt2x00dev, intf->bssid); - rt2x00lib_config_type(rt2x00dev, intf->type); - - /* - * It is possible that during that mac80211 has attempted - * to send frames while we were suspending or resuming. - * In that case we have disabled the TX queue and should - * now enable it again - */ - ieee80211_start_queues(rt2x00dev->hw); - - /* - * When in Master or Ad-hoc mode, - * restart Beacon transmitting by faking a beacondone event. - */ - if (intf->type == IEEE80211_IF_TYPE_AP || - intf->type == IEEE80211_IF_TYPE_IBSS) - rt2x00lib_beacondone(rt2x00dev); - - return 0; - -exit: - rt2x00lib_disable_radio(rt2x00dev); - rt2x00lib_uninitialize(rt2x00dev); - rt2x00debug_deregister(rt2x00dev); - - return retval; -} -EXPORT_SYMBOL_GPL(rt2x00lib_resume); -#endif /* CONFIG_PM */ - -/* - * rt2x00lib module information. - */ -MODULE_AUTHOR(DRV_PROJECT); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("rt2x00 library"); -MODULE_LICENSE("GPL"); diff --git a/package/rt2x00/src/rt2x00dev.h b/package/rt2x00/src/rt2x00dev.h deleted file mode 100644 index ee0bbfeeddd..00000000000 --- a/package/rt2x00/src/rt2x00dev.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2x00lib - Abstract: Data structures for the rt2x00lib module. - Supported chipsets: RT2460, RT2560, RT2570, - rt2561, rt2561s, rt2661, rt2571W & rt2671. - */ - -#ifndef RT2X00DEV_H -#define RT2X00DEV_H - -#include "rt2x00debug.h" -#include "rt2x00firmware.h" -#include "rt2x00rfkill.h" - -/* - * Radio control. - */ -int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev); -void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev); -void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, int enable); - -/* - * Initialization/uninitialization handlers. - */ -int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev); -void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev); - -/* - * Config handlers. - */ -void rt2x00lib_config_type(struct rt2x00_dev *rt2x00dev, const int type); -void rt2x00lib_config_phymode(struct rt2x00_dev *rt2x00dev, const int phymode); -void rt2x00lib_config_channel(struct rt2x00_dev *rt2x00dev, const int value, - const int channel, const int freq, const int txpower); -void rt2x00lib_config_promisc(struct rt2x00_dev *rt2x00dev, const int promisc); -void rt2x00lib_config_txpower(struct rt2x00_dev *rt2x00dev, const int txpower); -void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, - const int antenna_tx, const int antenna_rx); - -#endif /* RT2X00DEV_H */ diff --git a/package/rt2x00/src/rt2x00firmware.c b/package/rt2x00/src/rt2x00firmware.c deleted file mode 100644 index 236025f8b90..00000000000 --- a/package/rt2x00/src/rt2x00firmware.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2x00lib - Abstract: rt2x00 firmware loading routines. - */ - -/* - * Set enviroment defines for rt2x00.h - */ -#define DRV_NAME "rt2x00lib" - -#include -#include -#include - -#include "rt2x00.h" -#include "rt2x00lib.h" - -static int rt2x00lib_request_firmware(struct rt2x00_dev *rt2x00dev) -{ - struct device *device = wiphy_dev(rt2x00dev->hw->wiphy); - const struct firmware *fw; - char *fw_name; - int retval; - u16 crc; - u16 tmp; - - /* - * Read correct firmware from harddisk. - */ - fw_name = rt2x00dev->ops->lib->get_firmware_name(rt2x00dev); - if (!fw_name) { - ERROR(rt2x00dev, - "Invalid firmware filename.\n" - "Please file bug report to %s.\n", DRV_PROJECT); - return -EINVAL; - } - - INFO(rt2x00dev, "Loading firmware file '%s'.\n", fw_name); - - retval = request_firmware(&fw, fw_name, device); - if (retval) { - ERROR(rt2x00dev, "Failed to request Firmware.\n"); - return retval; - } - - if (!fw || !fw->size || !fw->data) { - ERROR(rt2x00dev, "Failed to read Firmware.\n"); - return -ENOENT; - } - - /* - * Validate the firmware using 16 bit CRC. - * The last 2 bytes of the firmware are the CRC - * so substract those 2 bytes from the CRC checksum, - * and set those 2 bytes to 0 when calculating CRC. - */ - tmp = 0; - crc = crc_itu_t(0, fw->data, fw->size - 2); - crc = crc_itu_t(crc, (u8 *)&tmp, 2); - - if (crc != (fw->data[fw->size - 2] << 8 | fw->data[fw->size - 1])) { - ERROR(rt2x00dev, "Firmware CRC error.\n"); - retval = -ENOENT; - goto exit; - } - - INFO(rt2x00dev, "Firmware detected - version: %d.%d.\n", - fw->data[fw->size - 4], fw->data[fw->size - 3]); - - rt2x00dev->fw = fw; - - return 0; - -exit: - release_firmware(fw); - - return retval; -} - -int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev) -{ - int retval; - - if (!rt2x00dev->fw) { - retval = rt2x00lib_request_firmware(rt2x00dev); - if (retval) - return retval; - } - - /* - * Send firmware to the device. - */ - retval = rt2x00dev->ops->lib->load_firmware(rt2x00dev, - rt2x00dev->fw->data, - rt2x00dev->fw->size); - return retval; -} - -void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev) -{ - release_firmware(rt2x00dev->fw); - rt2x00dev->fw = NULL; -} - diff --git a/package/rt2x00/src/rt2x00firmware.h b/package/rt2x00/src/rt2x00firmware.h deleted file mode 100644 index adba9c24c71..00000000000 --- a/package/rt2x00/src/rt2x00firmware.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2x00lib - Abstract: Data structures for the firmware loader. - Supported chipsets: rt2561, rt2561s, rt2661, rt2571W & rt2671. - */ - -#ifndef RT2X00FIRMWARE_H -#define RT2X00FIRMWARE_H - -#ifdef CONFIG_RT2X00_LIB_FIRMWARE -int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev); -int rt2x00lib_load_firmware_wait(struct rt2x00_dev *rt2x00dev); -#else /* CONFIG_RT2X00_LIB_FIRMWARE */ -static inline int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev) -{ - /* - * This shouldn't happen. - */ - BUG(); - return 0; -} - -static inline int rt2x00lib_load_firmware_wait(struct rt2x00_dev *rt2x00dev) -{ - return 0; -} -#endif /* CONFIG_RT2X00_LIB_FIRMWARE */ - -#endif /* RT2X00FIRMWARE_H */ diff --git a/package/rt2x00/src/rt2x00lib.h b/package/rt2x00/src/rt2x00lib.h deleted file mode 100644 index 06d9bc0015c..00000000000 --- a/package/rt2x00/src/rt2x00lib.h +++ /dev/null @@ -1,119 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2x00lib - Abstract: Data structures and definitions for the rt2x00lib module. - */ - -#ifndef RT2X00LIB_H -#define RT2X00LIB_H - -/* - * Interval defines - * Both the link tuner as the rfkill will be called once per second. - */ -#define LINK_TUNE_INTERVAL ( round_jiffies_relative(HZ) ) -#define RFKILL_POLL_INTERVAL ( 1000 ) - -/* - * Radio control handlers. - */ -int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev); -void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev); -void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state); -void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev); - -/* - * Initialization handlers. - */ -int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev); -void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev); - -/* - * Configuration handlers. - */ -void rt2x00lib_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *mac); -void rt2x00lib_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid); -void rt2x00lib_config_type(struct rt2x00_dev *rt2x00dev, const int type); -void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf, const int force_config); - -/* - * Firmware handlers. - */ -#ifdef CONFIG_RT2X00_LIB_FIRMWARE -int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev); -void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev); -#else -static inline int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev) -{ - return 0; -} -static inline void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev) -{ -} -#endif /* CONFIG_RT2X00_LIB_FIRMWARE */ - -/* - * Debugfs handlers. - */ -#ifdef CONFIG_RT2X00_LIB_DEBUGFS -void rt2x00debug_register(struct rt2x00_dev *rt2x00dev); -void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev); -#else -static inline void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) -{ -} - -static inline void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev) -{ -} -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ - -/* - * RFkill handlers. - */ -#ifdef CONFIG_RT2X00_LIB_RFKILL -int rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev); -void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev); -int rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev); -void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev); -#else -static inline int rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev) -{ - return 0; -} - -static inline void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev) -{ -} - -static inline int rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev) -{ - return 0; -} - -static inline void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev) -{ -} -#endif /* CONFIG_RT2X00_LIB_RFKILL */ - -#endif /* RT2X00LIB_H */ diff --git a/package/rt2x00/src/rt2x00mac.c b/package/rt2x00/src/rt2x00mac.c deleted file mode 100644 index 85ea8a8e658..00000000000 --- a/package/rt2x00/src/rt2x00mac.c +++ /dev/null @@ -1,446 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2x00mac - Abstract: rt2x00 generic mac80211 routines. - */ - -/* - * Set enviroment defines for rt2x00.h - */ -#define DRV_NAME "rt2x00lib" - -#include -#include - -#include "rt2x00.h" -#include "rt2x00lib.h" - -static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, - struct data_ring *ring, - struct sk_buff *frag_skb, - struct ieee80211_tx_control *control) -{ - struct sk_buff *skb; - int size; - - if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) - size = sizeof(struct ieee80211_cts); - else - size = sizeof(struct ieee80211_rts); - - skb = dev_alloc_skb(size + rt2x00dev->hw->extra_tx_headroom); - if (!skb) { - WARNING(rt2x00dev, "Failed to create RTS/CTS frame.\n"); - return NETDEV_TX_BUSY; - } - - skb_reserve(skb, rt2x00dev->hw->extra_tx_headroom); - skb_put(skb, size); - - if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) - ieee80211_ctstoself_get(rt2x00dev->hw, rt2x00dev->interface.id, - frag_skb->data, frag_skb->len, control, - (struct ieee80211_cts *)(skb->data)); - else - ieee80211_rts_get(rt2x00dev->hw, rt2x00dev->interface.id, - frag_skb->data, frag_skb->len, control, - (struct ieee80211_rts *)(skb->data)); - - if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, ring, skb, control)) { - WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n"); - return NETDEV_TX_BUSY; - } - - return NETDEV_TX_OK; -} - -int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *control) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data; - struct data_ring *ring; - u16 frame_control; - - /* - * Mac80211 might be calling this function while we are trying - * to remove the device or perhaps suspending it. - * Note that we can only stop the TX queues inside the TX path - * due to possible race conditions in mac80211. - */ - if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) { - ieee80211_stop_queues(hw); - return 0; - } - - /* - * Determine which ring to put packet on. - */ - ring = rt2x00lib_get_ring(rt2x00dev, control->queue); - if (unlikely(!ring)) { - ERROR(rt2x00dev, - "Attempt to send packet over invalid queue %d.\n" - "Please file bug report to %s.\n", - control->queue, DRV_PROJECT); - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - - /* - * If CTS/RTS is required. and this frame is not CTS or RTS, - * create and queue that frame first. But make sure we have - * at least enough entries available to send this CTS/RTS - * frame as well as the data frame. - */ - frame_control = le16_to_cpu(ieee80211hdr->frame_control); - if (!is_rts_frame(frame_control) && !is_cts_frame(frame_control) && - (control->flags & (IEEE80211_TXCTL_USE_RTS_CTS | - IEEE80211_TXCTL_USE_CTS_PROTECT))) { - if (rt2x00_ring_free(ring) <= 1) - return NETDEV_TX_BUSY; - - if (rt2x00mac_tx_rts_cts(rt2x00dev, ring, skb, control)) - return NETDEV_TX_BUSY; - } - - if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, ring, skb, control)) - return NETDEV_TX_BUSY; - - if (rt2x00dev->ops->lib->kick_tx_queue) - rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue); - - return NETDEV_TX_OK; -} -EXPORT_SYMBOL_GPL(rt2x00mac_tx); - -int rt2x00mac_start(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - int status; - - if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) || - test_bit(DEVICE_STARTED, &rt2x00dev->flags)) - return 0; - - /* - * If this is the first interface which is added, - * we should load the firmware now. - */ - if (test_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags)) { - status = rt2x00lib_load_firmware(rt2x00dev); - if (status) - return status; - } - - /* - * Initialize the device. - */ - status = rt2x00lib_initialize(rt2x00dev); - if (status) - return status; - - /* - * Enable radio. - */ - status = rt2x00lib_enable_radio(rt2x00dev); - if (status) { - rt2x00lib_uninitialize(rt2x00dev); - return status; - } - - __set_bit(DEVICE_STARTED, &rt2x00dev->flags); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00mac_start); - -void rt2x00mac_stop(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - - if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) - return; - - /* - * Perhaps we can add something smarter here, - * but for now just disabling the radio should do. - */ - rt2x00lib_disable_radio(rt2x00dev); - - __clear_bit(DEVICE_STARTED, &rt2x00dev->flags); -} -EXPORT_SYMBOL_GPL(rt2x00mac_stop); - -int rt2x00mac_add_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct interface *intf = &rt2x00dev->interface; - - /* FIXME: Beaconing is broken in rt2x00. */ - if (conf->type == IEEE80211_IF_TYPE_IBSS || - conf->type == IEEE80211_IF_TYPE_AP) { - ERROR(rt2x00dev, - "rt2x00 does not support Adhoc or Master mode"); - return -EOPNOTSUPP; - } - - /* - * Don't allow interfaces to be added while - * either the device has disappeared or when - * another interface is already present. - */ - if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) || - is_interface_present(intf)) - return -ENOBUFS; - - intf->id = conf->if_id; - intf->type = conf->type; - if (conf->type == IEEE80211_IF_TYPE_AP) - memcpy(&intf->bssid, conf->mac_addr, ETH_ALEN); - memcpy(&intf->mac, conf->mac_addr, ETH_ALEN); - - /* - * The MAC adddress must be configured after the device - * has been initialized. Otherwise the device can reset - * the MAC registers. - */ - rt2x00lib_config_mac_addr(rt2x00dev, intf->mac); - rt2x00lib_config_type(rt2x00dev, conf->type); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00mac_add_interface); - -void rt2x00mac_remove_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct interface *intf = &rt2x00dev->interface; - - /* - * Don't allow interfaces to be remove while - * either the device has disappeared or when - * no interface is present. - */ - if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) || - !is_interface_present(intf)) - return; - - intf->id = 0; - intf->type = INVALID_INTERFACE; - memset(&intf->bssid, 0x00, ETH_ALEN); - memset(&intf->mac, 0x00, ETH_ALEN); - - /* - * Make sure the bssid and mac address registers - * are cleared to prevent false ACKing of frames. - */ - rt2x00lib_config_mac_addr(rt2x00dev, intf->mac); - rt2x00lib_config_bssid(rt2x00dev, intf->bssid); - rt2x00lib_config_type(rt2x00dev, intf->type); -} -EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface); - -int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - - /* - * Mac80211 might be calling this function while we are trying - * to remove the device or perhaps suspending it. - */ - if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) - return 0; - - /* - * Check if we need to disable the radio, - * if this is not the case, at least the RX must be disabled. - */ - if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) { - if (!conf->radio_enabled) - rt2x00lib_disable_radio(rt2x00dev); - else - rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); - } - - rt2x00lib_config(rt2x00dev, conf, 0); - - /* - * Reenable RX only if the radio should be on. - */ - if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); - else if (conf->radio_enabled) - return rt2x00lib_enable_radio(rt2x00dev); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00mac_config); - -int rt2x00mac_config_interface(struct ieee80211_hw *hw, int if_id, - struct ieee80211_if_conf *conf) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct interface *intf = &rt2x00dev->interface; - int status; - - /* - * Mac80211 might be calling this function while we are trying - * to remove the device or perhaps suspending it. - */ - if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) - return 0; - - /* - * If the given type does not match the configured type, - * there has been a problem. - */ - if (conf->type != intf->type) - return -EINVAL; - - /* - * If the interface does not work in master mode, - * then the bssid value in the interface structure - * should now be set. - */ - if (conf->type != IEEE80211_IF_TYPE_AP) - memcpy(&intf->bssid, conf->bssid, ETH_ALEN); - rt2x00lib_config_bssid(rt2x00dev, intf->bssid); - - /* - * We only need to initialize the beacon when master mode is enabled. - */ - if (conf->type != IEEE80211_IF_TYPE_AP || !conf->beacon) - return 0; - - status = rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw, - conf->beacon, - conf->beacon_control); - if (status) - dev_kfree_skb(conf->beacon); - - return status; -} -EXPORT_SYMBOL_GPL(rt2x00mac_config_interface); - -int rt2x00mac_get_stats(struct ieee80211_hw *hw, - struct ieee80211_low_level_stats *stats) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - - /* - * The dot11ACKFailureCount, dot11RTSFailureCount and - * dot11RTSSuccessCount are updated in interrupt time. - * dot11FCSErrorCount is updated in the link tuner. - */ - memcpy(stats, &rt2x00dev->low_level_stats, sizeof(*stats)); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00mac_get_stats); - -int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw, - struct ieee80211_tx_queue_stats *stats) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - unsigned int i; - - for (i = 0; i < hw->queues; i++) - memcpy(&stats->data[i], &rt2x00dev->tx[i].stats, - sizeof(rt2x00dev->tx[i].stats)); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00mac_get_tx_stats); - -void rt2x00mac_erp_ie_changed(struct ieee80211_hw *hw, u8 changes, - int cts_protection, int preamble) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - int short_preamble; - int ack_timeout; - int ack_consume_time; - int difs; - - /* - * We only support changing preamble mode. - */ - if (!(changes & IEEE80211_ERP_CHANGE_PREAMBLE)) - return; - - short_preamble = !preamble; - preamble = !!(preamble) ? PREAMBLE : SHORT_PREAMBLE; - - difs = (hw->conf.flags & IEEE80211_CONF_SHORT_SLOT_TIME) ? - SHORT_DIFS : DIFS; - ack_timeout = difs + PLCP + preamble + get_duration(ACK_SIZE, 10); - - ack_consume_time = SIFS + PLCP + preamble + get_duration(ACK_SIZE, 10); - - if (short_preamble) - __set_bit(CONFIG_SHORT_PREAMBLE, &rt2x00dev->flags); - else - __clear_bit(CONFIG_SHORT_PREAMBLE, &rt2x00dev->flags); - - rt2x00dev->ops->lib->config_preamble(rt2x00dev, short_preamble, - ack_timeout, ack_consume_time); -} -EXPORT_SYMBOL_GPL(rt2x00mac_erp_ie_changed); - -int rt2x00mac_conf_tx(struct ieee80211_hw *hw, int queue, - const struct ieee80211_tx_queue_params *params) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct data_ring *ring; - - ring = rt2x00lib_get_ring(rt2x00dev, queue); - if (unlikely(!ring)) - return -EINVAL; - - /* - * The passed variables are stored as real value ((2^n)-1). - * Ralink registers require to know the bit number 'n'. - */ - if (params->cw_min) - ring->tx_params.cw_min = fls(params->cw_min); - else - ring->tx_params.cw_min = 5; /* cw_min: 2^5 = 32. */ - - if (params->cw_max) - ring->tx_params.cw_max = fls(params->cw_max); - else - ring->tx_params.cw_max = 10; /* cw_min: 2^10 = 1024. */ - - if (params->aifs) - ring->tx_params.aifs = params->aifs; - else - ring->tx_params.aifs = 2; - - INFO(rt2x00dev, - "Configured TX ring %d - CWmin: %d, CWmax: %d, Aifs: %d.\n", - queue, ring->tx_params.cw_min, ring->tx_params.cw_max, - ring->tx_params.aifs); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00mac_conf_tx); diff --git a/package/rt2x00/src/rt2x00pci.c b/package/rt2x00/src/rt2x00pci.c deleted file mode 100644 index 04663eb3195..00000000000 --- a/package/rt2x00/src/rt2x00pci.c +++ /dev/null @@ -1,486 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2x00pci - Abstract: rt2x00 generic pci device routines. - */ - -/* - * Set enviroment defines for rt2x00.h - */ -#define DRV_NAME "rt2x00pci" - -#include -#include -#include -#include - -#include "rt2x00.h" -#include "rt2x00pci.h" - -/* - * Beacon handlers. - */ -int rt2x00pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *control) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct data_ring *ring = - rt2x00lib_get_ring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); - struct data_entry *entry = rt2x00_get_data_entry(ring); - - /* - * Just in case mac80211 doesn't set this correctly, - * but we need this queue set for the descriptor - * initialization. - */ - control->queue = IEEE80211_TX_QUEUE_BEACON; - - /* - * Update the beacon entry. - */ - memcpy(entry->data_addr, skb->data, skb->len); - rt2x00lib_write_tx_desc(rt2x00dev, entry->priv, - (struct ieee80211_hdr *)skb->data, - skb->len, control); - - /* - * Enable beacon generation. - */ - rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00pci_beacon_update); - -/* - * TX data handlers. - */ -int rt2x00pci_write_tx_data(struct rt2x00_dev *rt2x00dev, - struct data_ring *ring, struct sk_buff *skb, - struct ieee80211_tx_control *control) -{ - struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data; - struct data_entry *entry = rt2x00_get_data_entry(ring); - struct data_desc *txd = entry->priv; - u32 word; - - if (rt2x00_ring_full(ring)) { - ieee80211_stop_queue(rt2x00dev->hw, control->queue); - return -EINVAL; - } - - rt2x00_desc_read(txd, 0, &word); - - if (rt2x00_get_field32(word, TXD_ENTRY_OWNER_NIC) || - rt2x00_get_field32(word, TXD_ENTRY_VALID)) { - ERROR(rt2x00dev, - "Arrived at non-free entry in the non-full queue %d.\n" - "Please file bug report to %s.\n", - control->queue, DRV_PROJECT); - ieee80211_stop_queue(rt2x00dev->hw, control->queue); - return -EINVAL; - } - - entry->skb = skb; - memcpy(&entry->tx_status.control, control, sizeof(*control)); - memcpy(entry->data_addr, skb->data, skb->len); - rt2x00lib_write_tx_desc(rt2x00dev, txd, ieee80211hdr, - skb->len, control); - - rt2x00_ring_index_inc(ring); - - if (rt2x00_ring_full(ring)) - ieee80211_stop_queue(rt2x00dev->hw, control->queue); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00pci_write_tx_data); - -/* - * RX data handlers. - */ -void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev) -{ - struct data_ring *ring = rt2x00dev->rx; - struct data_entry *entry; - struct data_desc *rxd; - struct sk_buff *skb; - struct ieee80211_hdr *hdr; - struct rxdata_entry_desc desc; - int header_size; - int align; - u32 word; - - while (1) { - entry = rt2x00_get_data_entry(ring); - rxd = entry->priv; - rt2x00_desc_read(rxd, 0, &word); - - if (rt2x00_get_field32(word, RXD_ENTRY_OWNER_NIC)) - break; - - memset(&desc, 0x00, sizeof(desc)); - rt2x00dev->ops->lib->fill_rxdone(entry, &desc); - - hdr = (struct ieee80211_hdr *)entry->data_addr; - header_size = - ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control)); - - /* - * The data behind the ieee80211 header must be - * aligned on a 4 byte boundary. - */ - align = header_size % 4; - - /* - * Allocate the sk_buffer, initialize it and copy - * all data into it. - */ - skb = dev_alloc_skb(desc.size + align); - if (!skb) - return; - - skb_reserve(skb, align); - memcpy(skb_put(skb, desc.size), entry->data_addr, desc.size); - - /* - * Send the frame to rt2x00lib for further processing. - */ - rt2x00lib_rxdone(entry, skb, &desc); - - if (test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags)) { - rt2x00_set_field32(&word, RXD_ENTRY_OWNER_NIC, 1); - rt2x00_desc_write(rxd, 0, word); - } - - rt2x00_ring_index_inc(ring); - } -} -EXPORT_SYMBOL_GPL(rt2x00pci_rxdone); - -/* - * Device initialization handlers. - */ -#define priv_offset(__ring, __i) \ -({ \ - ring->data_addr + (i * ring->desc_size); \ -}) - -#define data_addr_offset(__ring, __i) \ -({ \ - (__ring)->data_addr + \ - ((__ring)->stats.limit * (__ring)->desc_size) + \ - ((__i) * (__ring)->data_size); \ -}) - -#define data_dma_offset(__ring, __i) \ -({ \ - (__ring)->data_dma + \ - ((__ring)->stats.limit * (__ring)->desc_size) + \ - ((__i) * (__ring)->data_size); \ -}) - -static int rt2x00pci_alloc_dma(struct rt2x00_dev *rt2x00dev, - struct data_ring *ring) -{ - unsigned int i; - - /* - * Allocate DMA memory for descriptor and buffer. - */ - ring->data_addr = pci_alloc_consistent(rt2x00dev_pci(rt2x00dev), - rt2x00_get_ring_size(ring), - &ring->data_dma); - if (!ring->data_addr) - return -ENOMEM; - - /* - * Initialize all ring entries to contain valid - * addresses. - */ - for (i = 0; i < ring->stats.limit; i++) { - ring->entry[i].priv = priv_offset(ring, i); - ring->entry[i].data_addr = data_addr_offset(ring, i); - ring->entry[i].data_dma = data_dma_offset(ring, i); - } - - return 0; -} - -static void rt2x00pci_free_dma(struct rt2x00_dev *rt2x00dev, - struct data_ring *ring) -{ - if (ring->data_addr) - pci_free_consistent(rt2x00dev_pci(rt2x00dev), - rt2x00_get_ring_size(ring), - ring->data_addr, ring->data_dma); - ring->data_addr = NULL; -} - -int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev) -{ - struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev); - struct data_ring *ring; - int status; - - /* - * Allocate DMA - */ - ring_for_each(rt2x00dev, ring) { - status = rt2x00pci_alloc_dma(rt2x00dev, ring); - if (status) - goto exit; - } - - /* - * Register interrupt handler. - */ - status = request_irq(pci_dev->irq, rt2x00dev->ops->lib->irq_handler, - IRQF_SHARED, pci_name(pci_dev), rt2x00dev); - if (status) { - ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n", - pci_dev->irq, status); - return status; - } - - return 0; - -exit: - rt2x00pci_uninitialize(rt2x00dev); - - return status; -} -EXPORT_SYMBOL_GPL(rt2x00pci_initialize); - -void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev) -{ - struct data_ring *ring; - - /* - * Free irq line. - */ - free_irq(rt2x00dev_pci(rt2x00dev)->irq, rt2x00dev); - - /* - * Free DMA - */ - ring_for_each(rt2x00dev, ring) - rt2x00pci_free_dma(rt2x00dev, ring); -} -EXPORT_SYMBOL_GPL(rt2x00pci_uninitialize); - -/* - * PCI driver handlers. - */ -static void rt2x00pci_free_reg(struct rt2x00_dev *rt2x00dev) -{ - kfree(rt2x00dev->rf); - rt2x00dev->rf = NULL; - - kfree(rt2x00dev->eeprom); - rt2x00dev->eeprom = NULL; - - if (rt2x00dev->csr_addr) { - iounmap(rt2x00dev->csr_addr); - rt2x00dev->csr_addr = NULL; - } -} - -static int rt2x00pci_alloc_reg(struct rt2x00_dev *rt2x00dev) -{ - struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev); - - rt2x00dev->csr_addr = ioremap(pci_resource_start(pci_dev, 0), - pci_resource_len(pci_dev, 0)); - if (!rt2x00dev->csr_addr) - goto exit; - - rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL); - if (!rt2x00dev->eeprom) - goto exit; - - rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL); - if (!rt2x00dev->rf) - goto exit; - - return 0; - -exit: - ERROR_PROBE("Failed to allocate registers.\n"); - - rt2x00pci_free_reg(rt2x00dev); - - return -ENOMEM; -} - -int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) -{ - struct rt2x00_ops *ops = (struct rt2x00_ops *)id->driver_data; - struct ieee80211_hw *hw; - struct rt2x00_dev *rt2x00dev; - int retval; - - retval = pci_request_regions(pci_dev, pci_name(pci_dev)); - if (retval) { - ERROR_PROBE("PCI request regions failed.\n"); - return retval; - } - - retval = pci_enable_device(pci_dev); - if (retval) { - ERROR_PROBE("Enable device failed.\n"); - goto exit_release_regions; - } - - pci_set_master(pci_dev); - - if (pci_set_mwi(pci_dev)) - ERROR_PROBE("MWI not available.\n"); - - if (pci_set_dma_mask(pci_dev, DMA_64BIT_MASK) && - pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) { - ERROR_PROBE("PCI DMA not supported.\n"); - retval = -EIO; - goto exit_disable_device; - } - - hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw); - if (!hw) { - ERROR_PROBE("Failed to allocate hardware.\n"); - retval = -ENOMEM; - goto exit_disable_device; - } - - pci_set_drvdata(pci_dev, hw); - - rt2x00dev = hw->priv; - rt2x00dev->dev = pci_dev; - rt2x00dev->ops = ops; - rt2x00dev->hw = hw; - - retval = rt2x00pci_alloc_reg(rt2x00dev); - if (retval) - goto exit_free_device; - - retval = rt2x00lib_probe_dev(rt2x00dev); - if (retval) - goto exit_free_reg; - - return 0; - -exit_free_reg: - rt2x00pci_free_reg(rt2x00dev); - -exit_free_device: - ieee80211_free_hw(hw); - -exit_disable_device: - if (retval != -EBUSY) - pci_disable_device(pci_dev); - -exit_release_regions: - pci_release_regions(pci_dev); - - pci_set_drvdata(pci_dev, NULL); - - return retval; -} -EXPORT_SYMBOL_GPL(rt2x00pci_probe); - -void rt2x00pci_remove(struct pci_dev *pci_dev) -{ - struct ieee80211_hw *hw = pci_get_drvdata(pci_dev); - struct rt2x00_dev *rt2x00dev = hw->priv; - - /* - * Free all allocated data. - */ - rt2x00lib_remove_dev(rt2x00dev); - rt2x00pci_free_reg(rt2x00dev); - ieee80211_free_hw(hw); - - /* - * Free the PCI device data. - */ - pci_set_drvdata(pci_dev, NULL); - pci_disable_device(pci_dev); - pci_release_regions(pci_dev); -} -EXPORT_SYMBOL_GPL(rt2x00pci_remove); - -#ifdef CONFIG_PM -int rt2x00pci_suspend(struct pci_dev *pci_dev, pm_message_t state) -{ - struct ieee80211_hw *hw = pci_get_drvdata(pci_dev); - struct rt2x00_dev *rt2x00dev = hw->priv; - int retval; - - retval = rt2x00lib_suspend(rt2x00dev, state); - if (retval) - return retval; - - rt2x00pci_free_reg(rt2x00dev); - - pci_save_state(pci_dev); - pci_disable_device(pci_dev); - return pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state)); -} -EXPORT_SYMBOL_GPL(rt2x00pci_suspend); - -int rt2x00pci_resume(struct pci_dev *pci_dev) -{ - struct ieee80211_hw *hw = pci_get_drvdata(pci_dev); - struct rt2x00_dev *rt2x00dev = hw->priv; - int retval; - - if (pci_set_power_state(pci_dev, PCI_D0) || - pci_enable_device(pci_dev) || - pci_restore_state(pci_dev)) { - ERROR(rt2x00dev, "Failed to resume device.\n"); - return -EIO; - } - - retval = rt2x00pci_alloc_reg(rt2x00dev); - if (retval) - return retval; - - retval = rt2x00lib_resume(rt2x00dev); - if (retval) - goto exit_free_reg; - - return 0; - -exit_free_reg: - rt2x00pci_free_reg(rt2x00dev); - - return retval; -} -EXPORT_SYMBOL_GPL(rt2x00pci_resume); -#endif /* CONFIG_PM */ - -/* - * rt2x00pci module information. - */ -MODULE_AUTHOR(DRV_PROJECT); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("rt2x00 library"); -MODULE_LICENSE("GPL"); diff --git a/package/rt2x00/src/rt2x00pci.h b/package/rt2x00/src/rt2x00pci.h deleted file mode 100644 index 82adeac061d..00000000000 --- a/package/rt2x00/src/rt2x00pci.h +++ /dev/null @@ -1,127 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2x00pci - Abstract: Data structures for the rt2x00pci module. - */ - -#ifndef RT2X00PCI_H -#define RT2X00PCI_H - -#include - -/* - * This variable should be used with the - * pci_driver structure initialization. - */ -#define PCI_DEVICE_DATA(__ops) .driver_data = (kernel_ulong_t)(__ops) - -/* - * Register defines. - * Some registers require multiple attempts before success, - * in those cases REGISTER_BUSY_COUNT attempts should be - * taken with a REGISTER_BUSY_DELAY interval. - */ -#define REGISTER_BUSY_COUNT 5 -#define REGISTER_BUSY_DELAY 100 - -/* - * Descriptor availability flags. - * All PCI device descriptors have these 2 flags - * with the exact same definition. - * By storing them here we can use them inside rt2x00pci - * for some simple entry availability checking. - */ -#define TXD_ENTRY_OWNER_NIC FIELD32(0x00000001) -#define TXD_ENTRY_VALID FIELD32(0x00000002) -#define RXD_ENTRY_OWNER_NIC FIELD32(0x00000001) - -/* - * Register access. - */ -static inline void rt2x00pci_register_read(const struct rt2x00_dev *rt2x00dev, - const unsigned long offset, - u32 *value) -{ - *value = readl(rt2x00dev->csr_addr + offset); -} - -static inline void -rt2x00pci_register_multiread(const struct rt2x00_dev *rt2x00dev, - const unsigned long offset, - void *value, const u16 length) -{ - memcpy_fromio(value, rt2x00dev->csr_addr + offset, length); -} - -static inline void rt2x00pci_register_write(const struct rt2x00_dev *rt2x00dev, - const unsigned long offset, - u32 value) -{ - writel(value, rt2x00dev->csr_addr + offset); -} - -static inline void -rt2x00pci_register_multiwrite(const struct rt2x00_dev *rt2x00dev, - const unsigned long offset, - void *value, const u16 length) -{ - memcpy_toio(rt2x00dev->csr_addr + offset, value, length); -} - -/* - * Beacon handlers. - */ -int rt2x00pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *control); - -/* - * TX data handlers. - */ -int rt2x00pci_write_tx_data(struct rt2x00_dev *rt2x00dev, - struct data_ring *ring, struct sk_buff *skb, - struct ieee80211_tx_control *control); - -/* - * RX data handlers. - */ -void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev); - -/* - * Device initialization handlers. - */ -int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev); -void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev); - -/* - * PCI driver handlers. - */ -int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id); -void rt2x00pci_remove(struct pci_dev *pci_dev); -#ifdef CONFIG_PM -int rt2x00pci_suspend(struct pci_dev *pci_dev, pm_message_t state); -int rt2x00pci_resume(struct pci_dev *pci_dev); -#else -#define rt2x00pci_suspend NULL -#define rt2x00pci_resume NULL -#endif /* CONFIG_PM */ - -#endif /* RT2X00PCI_H */ diff --git a/package/rt2x00/src/rt2x00reg.h b/package/rt2x00/src/rt2x00reg.h deleted file mode 100644 index 838421216da..00000000000 --- a/package/rt2x00/src/rt2x00reg.h +++ /dev/null @@ -1,292 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2x00 - Abstract: rt2x00 generic register information. - */ - -#ifndef RT2X00REG_H -#define RT2X00REG_H - -/* - * TX result flags. - */ -enum TX_STATUS { - TX_SUCCESS = 0, - TX_SUCCESS_RETRY = 1, - TX_FAIL_RETRY = 2, - TX_FAIL_INVALID = 3, - TX_FAIL_OTHER = 4, -}; - -/* - * Antenna values - */ -enum antenna { - ANTENNA_SW_DIVERSITY = 0, - ANTENNA_A = 1, - ANTENNA_B = 2, - ANTENNA_HW_DIVERSITY = 3, -}; - -/* - * Led mode values. - */ -enum led_mode { - LED_MODE_DEFAULT = 0, - LED_MODE_TXRX_ACTIVITY = 1, - LED_MODE_SIGNAL_STRENGTH = 2, - LED_MODE_ASUS = 3, - LED_MODE_ALPHA = 4, -}; - -/* - * TSF sync values - */ -enum tsf_sync { - TSF_SYNC_NONE = 0, - TSF_SYNC_INFRA = 1, - TSF_SYNC_BEACON = 2, -}; - -/* - * Device states - */ -enum dev_state { - STATE_DEEP_SLEEP = 0, - STATE_SLEEP = 1, - STATE_STANDBY = 2, - STATE_AWAKE = 3, - -/* - * Additional device states, these values are - * not strict since they are not directly passed - * into the device. - */ - STATE_RADIO_ON, - STATE_RADIO_OFF, - STATE_RADIO_RX_ON, - STATE_RADIO_RX_OFF, - STATE_RADIO_IRQ_ON, - STATE_RADIO_IRQ_OFF, -}; - -/* - * IFS backoff values - */ -enum ifs { - IFS_BACKOFF = 0, - IFS_SIFS = 1, - IFS_NEW_BACKOFF = 2, - IFS_NONE = 3, -}; - -/* - * Cipher types for hardware encryption - */ -enum cipher { - CIPHER_NONE = 0, - CIPHER_WEP64 = 1, - CIPHER_WEP128 = 2, - CIPHER_TKIP = 3, - CIPHER_AES = 4, -/* - * The following fields were added by rt61pci and rt73usb. - */ - CIPHER_CKIP64 = 5, - CIPHER_CKIP128 = 6, - CIPHER_TKIP_NO_MIC = 7, -}; - -/* - * Register handlers. - * We store the position of a register field inside a field structure, - * This will simplify the process of setting and reading a certain field - * inside the register while making sure the process remains byte order safe. - */ -struct rt2x00_field8 { - u8 bit_offset; - u8 bit_mask; -}; - -struct rt2x00_field16 { - u16 bit_offset; - u16 bit_mask; -}; - -struct rt2x00_field32 { - u32 bit_offset; - u32 bit_mask; -}; - -/* - * Power of two check, this will check - * if the mask that has been given contains - * and contiguous set of bits. - */ -#define is_power_of_two(x) ( !((x) & ((x)-1)) ) -#define low_bit_mask(x) ( ((x)-1) & ~(x) ) -#define is_valid_mask(x) is_power_of_two(1 + (x) + low_bit_mask(x)) - -#define FIELD8(__mask) \ -({ \ - BUILD_BUG_ON(!(__mask) || \ - !is_valid_mask(__mask) || \ - (__mask) != (u8)(__mask)); \ - (struct rt2x00_field8) { \ - __ffs(__mask), (__mask) \ - }; \ -}) - -#define FIELD16(__mask) \ -({ \ - BUILD_BUG_ON(!(__mask) || \ - !is_valid_mask(__mask) || \ - (__mask) != (u16)(__mask));\ - (struct rt2x00_field16) { \ - __ffs(__mask), (__mask) \ - }; \ -}) - -#define FIELD32(__mask) \ -({ \ - BUILD_BUG_ON(!(__mask) || \ - !is_valid_mask(__mask) || \ - (__mask) != (u32)(__mask));\ - (struct rt2x00_field32) { \ - __ffs(__mask), (__mask) \ - }; \ -}) - -static inline void rt2x00_set_field32(u32 *reg, - const struct rt2x00_field32 field, - const u32 value) -{ - *reg &= ~(field.bit_mask); - *reg |= (value << field.bit_offset) & field.bit_mask; -} - -static inline u32 rt2x00_get_field32(const u32 reg, - const struct rt2x00_field32 field) -{ - return (reg & field.bit_mask) >> field.bit_offset; -} - -static inline void rt2x00_set_field16(u16 *reg, - const struct rt2x00_field16 field, - const u16 value) -{ - *reg &= ~(field.bit_mask); - *reg |= (value << field.bit_offset) & field.bit_mask; -} - -static inline u16 rt2x00_get_field16(const u16 reg, - const struct rt2x00_field16 field) -{ - return (reg & field.bit_mask) >> field.bit_offset; -} - -static inline void rt2x00_set_field8(u8 *reg, - const struct rt2x00_field8 field, - const u8 value) -{ - *reg &= ~(field.bit_mask); - *reg |= (value << field.bit_offset) & field.bit_mask; -} - -static inline u8 rt2x00_get_field8(const u8 reg, - const struct rt2x00_field8 field) -{ - return (reg & field.bit_mask) >> field.bit_offset; -} - -/* - * Device specific rate value. - * We will have to create the device specific rate value - * passed to the ieee80211 kernel. We need to make it a consist of - * multiple fields because we want to store more then 1 device specific - * values inside the value. - * 1 - rate, stored as 100 kbit/s. - * 2 - preamble, short_preamble enabled flag. - * 3 - MASK_RATE, which rates are enabled in this mode, this mask - * corresponds with the TX register format for the current device. - * 4 - plcp, 802.11b rates are device specific, - * 802.11g rates are set according to the ieee802.11a-1999 p.14. - * The bit to enable preamble is set in a seperate define. - */ -#define DEV_RATE FIELD32(0x000007ff) -#define DEV_PREAMBLE FIELD32(0x00000800) -#define DEV_RATEMASK FIELD32(0x00fff000) -#define DEV_PLCP FIELD32(0xff000000) - -/* - * Bitfields - */ -#define DEV_RATEBIT_1MB ( 1 << 0 ) -#define DEV_RATEBIT_2MB ( 1 << 1 ) -#define DEV_RATEBIT_5_5MB ( 1 << 2 ) -#define DEV_RATEBIT_11MB ( 1 << 3 ) -#define DEV_RATEBIT_6MB ( 1 << 4 ) -#define DEV_RATEBIT_9MB ( 1 << 5 ) -#define DEV_RATEBIT_12MB ( 1 << 6 ) -#define DEV_RATEBIT_18MB ( 1 << 7 ) -#define DEV_RATEBIT_24MB ( 1 << 8 ) -#define DEV_RATEBIT_36MB ( 1 << 9 ) -#define DEV_RATEBIT_48MB ( 1 << 10 ) -#define DEV_RATEBIT_54MB ( 1 << 11 ) - -/* - * Bitmasks for DEV_RATEMASK - */ -#define DEV_RATEMASK_1MB ( (DEV_RATEBIT_1MB << 1) -1 ) -#define DEV_RATEMASK_2MB ( (DEV_RATEBIT_2MB << 1) -1 ) -#define DEV_RATEMASK_5_5MB ( (DEV_RATEBIT_5_5MB << 1) -1 ) -#define DEV_RATEMASK_11MB ( (DEV_RATEBIT_11MB << 1) -1 ) -#define DEV_RATEMASK_6MB ( (DEV_RATEBIT_6MB << 1) -1 ) -#define DEV_RATEMASK_9MB ( (DEV_RATEBIT_9MB << 1) -1 ) -#define DEV_RATEMASK_12MB ( (DEV_RATEBIT_12MB << 1) -1 ) -#define DEV_RATEMASK_18MB ( (DEV_RATEBIT_18MB << 1) -1 ) -#define DEV_RATEMASK_24MB ( (DEV_RATEBIT_24MB << 1) -1 ) -#define DEV_RATEMASK_36MB ( (DEV_RATEBIT_36MB << 1) -1 ) -#define DEV_RATEMASK_48MB ( (DEV_RATEBIT_48MB << 1) -1 ) -#define DEV_RATEMASK_54MB ( (DEV_RATEBIT_54MB << 1) -1 ) - -/* - * Bitmask groups of bitrates - */ -#define DEV_BASIC_RATEMASK \ - ( DEV_RATEMASK_11MB | \ - DEV_RATEBIT_6MB | DEV_RATEBIT_12MB | DEV_RATEBIT_24MB ) - -#define DEV_CCK_RATEMASK ( DEV_RATEMASK_11MB ) -#define DEV_OFDM_RATEMASK ( DEV_RATEMASK_54MB & ~DEV_CCK_RATEMASK ) - -/* - * Macro's to set and get specific fields from the device specific val and val2 - * fields inside the ieee80211_rate entry. - */ -#define DEVICE_SET_RATE_FIELD(__value, __mask) \ - (int)( ((__value) << DEV_##__mask.bit_offset) & DEV_##__mask.bit_mask ) - -#define DEVICE_GET_RATE_FIELD(__value, __mask) \ - (int)( ((__value) & DEV_##__mask.bit_mask) >> DEV_##__mask.bit_offset ) - -#endif /* RT2X00REG_H */ diff --git a/package/rt2x00/src/rt2x00rfkill.c b/package/rt2x00/src/rt2x00rfkill.c deleted file mode 100644 index a0f8b8e0a24..00000000000 --- a/package/rt2x00/src/rt2x00rfkill.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2x00rfkill - Abstract: rt2x00 rfkill routines. - */ - -/* - * Set enviroment defines for rt2x00.h - */ -#define DRV_NAME "rt2x00lib" - -#include -#include -#include -#include - -#include "rt2x00.h" -#include "rt2x00lib.h" - -static int rt2x00rfkill_toggle_radio(void *data, enum rfkill_state state) -{ - struct rt2x00_dev *rt2x00dev = data; - int retval = 0; - - if (unlikely(!rt2x00dev)) - return 0; - - /* - * Only continue if there are enabled interfaces. - */ - if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags)) - return 0; - - if (state == RFKILL_STATE_ON) { - INFO(rt2x00dev, "Hardware button pressed, enabling radio.\n"); - __clear_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags); - retval = rt2x00lib_enable_radio(rt2x00dev); - } else if (state == RFKILL_STATE_OFF) { - INFO(rt2x00dev, "Hardware button pressed, disabling radio.\n"); - __set_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags); - rt2x00lib_disable_radio(rt2x00dev); - } - - return retval; -} - -static void rt2x00rfkill_poll(struct input_polled_dev *poll_dev) -{ - struct rt2x00_dev *rt2x00dev = poll_dev->private; - int state = rt2x00dev->ops->lib->rfkill_poll(rt2x00dev); - - if (rt2x00dev->rfkill->state != state) - input_report_key(poll_dev->input, KEY_WLAN, 1); -} - -int rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev) -{ - int retval; - - if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) - return 0; - - retval = rfkill_register(rt2x00dev->rfkill); - if (retval) { - ERROR(rt2x00dev, "Failed to register rfkill handler.\n"); - return retval; - } - - retval = input_register_polled_device(rt2x00dev->poll_dev); - if (retval) { - ERROR(rt2x00dev, "Failed to register polled device.\n"); - rfkill_unregister(rt2x00dev->rfkill); - return retval; - } - - return 0; -} - -void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev) -{ - if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) - return; - - input_unregister_polled_device(rt2x00dev->poll_dev); - rfkill_unregister(rt2x00dev->rfkill); -} - -int rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev) -{ - struct device *device = wiphy_dev(rt2x00dev->hw->wiphy); - - if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) - return 0; - - rt2x00dev->rfkill = rfkill_allocate(device, RFKILL_TYPE_WLAN); - if (!rt2x00dev->rfkill) { - ERROR(rt2x00dev, "Failed to allocate rfkill handler.\n"); - return -ENOMEM; - } - - rt2x00dev->rfkill->name = rt2x00dev->ops->name; - rt2x00dev->rfkill->data = rt2x00dev; - rt2x00dev->rfkill->state = rt2x00dev->ops->lib->rfkill_poll(rt2x00dev); - rt2x00dev->rfkill->toggle_radio = rt2x00rfkill_toggle_radio; - - rt2x00dev->poll_dev = input_allocate_polled_device(); - if (!rt2x00dev->poll_dev) { - ERROR(rt2x00dev, "Failed to allocate polled device.\n"); - rfkill_free(rt2x00dev->rfkill); - return -ENOMEM; - } - - rt2x00dev->poll_dev->private = rt2x00dev; - rt2x00dev->poll_dev->poll = rt2x00rfkill_poll; - rt2x00dev->poll_dev->poll_interval = RFKILL_POLL_INTERVAL; - - return 0; -} - -void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev) -{ - if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) - return; - - input_free_polled_device(rt2x00dev->poll_dev); - rfkill_free(rt2x00dev->rfkill); -} diff --git a/package/rt2x00/src/rt2x00rfkill.h b/package/rt2x00/src/rt2x00rfkill.h deleted file mode 100644 index 1bd619dcd13..00000000000 --- a/package/rt2x00/src/rt2x00rfkill.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2x00lib - Abstract: Data structures for the rfkill. - Supported chipsets: RT2460, RT2560, rt2561, rt2561s, rt2661. - */ - -#ifndef RT2X00RFKILL_H -#define RT2X00RFKILL_H - -#ifdef CONFIG_RT2X00_LIB_RFKILL -int rt2x00lib_register_rfkill(struct rt2x00_dev *rt2x00dev); -void rt2x00lib_unregister_rfkill(struct rt2x00_dev *rt2x00dev); -int rt2x00lib_allocate_rfkill(struct rt2x00_dev *rt2x00dev); -void rt2x00lib_free_rfkill(struct rt2x00_dev *rt2x00dev); -#else /* CONFIG_RT2X00_LIB_RFKILL */ -static inline int rt2x00lib_register_rfkill(struct rt2x00_dev *rt2x00dev) -{ - return 0; -} - -static inline void rt2x00lib_unregister_rfkill(struct rt2x00_dev *rt2x00dev){} - -static inline int rt2x00lib_allocate_rfkill(struct rt2x00_dev *rt2x00dev) -{ - return 0; -} - -static inline void rt2x00lib_free_rfkill(struct rt2x00_dev *rt2x00dev){} -#endif /* CONFIG_RT2X00_LIB_RFKILL */ - -#endif /* RT2X00RFKILL_H */ diff --git a/package/rt2x00/src/rt2x00ring.h b/package/rt2x00/src/rt2x00ring.h deleted file mode 100644 index 1a864d32cfb..00000000000 --- a/package/rt2x00/src/rt2x00ring.h +++ /dev/null @@ -1,268 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2x00 - Abstract: rt2x00 ring datastructures and routines - */ - -#ifndef RT2X00RING_H -#define RT2X00RING_H - -/* - * data_desc - * Each data entry also contains a descriptor which is used by the - * device to determine what should be done with the packet and - * what the current status is. - * This structure is greatly simplified, but the descriptors - * are basically a list of little endian 32 bit values. - * Make the array by default 1 word big, this will allow us - * to use sizeof() correctly. - */ -struct data_desc { - __le32 word[1]; -}; - -/* - * rxdata_entry_desc - * Summary of information that has been read from the - * RX frame descriptor. - */ -struct rxdata_entry_desc { - int signal; - int rssi; - int ofdm; - int size; - int flags; -}; - -/* - * txdata_entry_desc - * Summary of information that should be written into the - * descriptor for sending a TX frame. - */ -struct txdata_entry_desc { - unsigned long flags; -#define ENTRY_TXDONE 1 -#define ENTRY_TXD_RTS_FRAME 2 -#define ENTRY_TXD_OFDM_RATE 3 -#define ENTRY_TXD_MORE_FRAG 4 -#define ENTRY_TXD_REQ_TIMESTAMP 5 -#define ENTRY_TXD_BURST 6 - -/* - * Queue ID. ID's 0-4 are data TX rings - */ - int queue; -#define QUEUE_MGMT 13 -#define QUEUE_RX 14 -#define QUEUE_OTHER 15 - - /* - * PLCP values. - */ - u16 length_high; - u16 length_low; - u16 signal; - u16 service; - - /* - * Timing information - */ - int aifs; - int ifs; - int cw_min; - int cw_max; -}; - -/* - * data_entry - * The data ring is a list of data entries. - * Each entry holds a reference to the descriptor - * and the data buffer. For TX rings the reference to the - * sk_buff of the packet being transmitted is also stored here. - */ -struct data_entry { - /* - * Status flags - */ - unsigned long flags; -#define ENTRY_OWNER_NIC 1 - - /* - * Ring we belong to. - */ - struct data_ring *ring; - - /* - * sk_buff for the packet which is being transmitted - * in this entry (Only used with TX related rings). - */ - struct sk_buff *skb; - - /* - * Store a ieee80211_tx_status structure in each - * ring entry, this will optimize the txdone - * handler. - */ - struct ieee80211_tx_status tx_status; - - /* - * private pointer specific to driver. - */ - void *priv; - - /* - * Data address for this entry. - */ - void *data_addr; - dma_addr_t data_dma; -}; - -/* - * data_ring - * Data rings are used by the device to send and receive packets. - * The data_addr is the base address of the data memory. - * To determine at which point in the ring we are, - * have to use the rt2x00_ring_index_*() functions. - */ -struct data_ring { - /* - * Pointer to main rt2x00dev structure where this - * ring belongs to. - */ - struct rt2x00_dev *rt2x00dev; - - /* - * Base address for the device specific data entries. - */ - struct data_entry *entry; - - /* - * TX queue statistic info. - */ - struct ieee80211_tx_queue_stats_data stats; - - /* - * TX Queue parameters. - */ - struct ieee80211_tx_queue_params tx_params; - - /* - * Base address for data ring. - */ - dma_addr_t data_dma; - void *data_addr; - - /* - * Index variables. - */ - u16 index; - u16 index_done; - - /* - * Size of packet and descriptor in bytes. - */ - u16 data_size; - u16 desc_size; -}; - -/* - * Handlers to determine the address of the current device specific - * data entry, where either index or index_done points to. - */ -static inline struct data_entry *rt2x00_get_data_entry(struct data_ring *ring) -{ - return &ring->entry[ring->index]; -} - -static inline struct data_entry *rt2x00_get_data_entry_done(struct data_ring - *ring) -{ - return &ring->entry[ring->index_done]; -} - -/* - * Total ring memory - */ -static inline int rt2x00_get_ring_size(struct data_ring *ring) -{ - return ring->stats.limit * (ring->desc_size + ring->data_size); -} - -/* - * Ring index manipulation functions. - */ -static inline void rt2x00_ring_index_inc(struct data_ring *ring) -{ - ring->index++; - if (ring->index >= ring->stats.limit) - ring->index = 0; - ring->stats.len++; -} - -static inline void rt2x00_ring_index_done_inc(struct data_ring *ring) -{ - ring->index_done++; - if (ring->index_done >= ring->stats.limit) - ring->index_done = 0; - ring->stats.len--; - ring->stats.count++; -} - -static inline void rt2x00_ring_index_clear(struct data_ring *ring) -{ - ring->index = 0; - ring->index_done = 0; - ring->stats.len = 0; - ring->stats.count = 0; -} - -static inline int rt2x00_ring_empty(struct data_ring *ring) -{ - return ring->stats.len == 0; -} - -static inline int rt2x00_ring_full(struct data_ring *ring) -{ - return ring->stats.len == ring->stats.limit; -} - -static inline int rt2x00_ring_free(struct data_ring *ring) -{ - return ring->stats.limit - ring->stats.len; -} - -/* - * TX/RX Descriptor access functions. - */ -static inline void rt2x00_desc_read(struct data_desc *desc, - const u8 word, u32 *value) -{ - *value = le32_to_cpu(desc->word[word]); -} - -static inline void rt2x00_desc_write(struct data_desc *desc, - const u8 word, const u32 value) -{ - desc->word[word] = cpu_to_le32(value); -} - -#endif /* RT2X00RING_H */ diff --git a/package/rt2x00/src/rt2x00usb.c b/package/rt2x00/src/rt2x00usb.c deleted file mode 100644 index 568d73847dc..00000000000 --- a/package/rt2x00/src/rt2x00usb.c +++ /dev/null @@ -1,615 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2x00usb - Abstract: rt2x00 generic usb device routines. - */ - -/* - * Set enviroment defines for rt2x00.h - */ -#define DRV_NAME "rt2x00usb" - -#include -#include -#include - -#include "rt2x00.h" -#include "rt2x00usb.h" - -/* - * Interfacing with the HW. - */ -int rt2x00usb_vendor_request(const struct rt2x00_dev *rt2x00dev, - const u8 request, const u8 requesttype, - const u16 offset, const u16 value, - void *buffer, const u16 buffer_length, - const int timeout) -{ - struct usb_device *usb_dev = - interface_to_usbdev(rt2x00dev_usb(rt2x00dev)); - int status; - unsigned int i; - unsigned int pipe = - (requesttype == USB_VENDOR_REQUEST_IN) ? - usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0); - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - status = usb_control_msg(usb_dev, pipe, request, requesttype, - value, offset, buffer, buffer_length, - timeout); - if (status >= 0) - return 0; - - /* - * Check for errors - * -ENODEV: Device has disappeared, no point continuing. - * All other errors: Try again. - */ - else if (status == -ENODEV) - break; - } - - ERROR(rt2x00dev, - "Vendor Request 0x%02x failed for offset 0x%04x with error %d.\n", - request, offset, status); - - return status; -} -EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request); - -int rt2x00usb_vendor_request_buff(const struct rt2x00_dev *rt2x00dev, - const u8 request, const u8 requesttype, - const u16 offset, void *buffer, - const u16 buffer_length, const int timeout) -{ - int status; - - /* - * Check for Cache availability. - */ - if (unlikely(!rt2x00dev->csr_cache || buffer_length > CSR_CACHE_SIZE)) { - ERROR(rt2x00dev, "CSR cache not available.\n"); - return -ENOMEM; - } - - if (requesttype == USB_VENDOR_REQUEST_OUT) - memcpy(rt2x00dev->csr_cache, buffer, buffer_length); - - status = rt2x00usb_vendor_request(rt2x00dev, request, requesttype, - offset, 0, rt2x00dev->csr_cache, - buffer_length, timeout); - - if (!status && requesttype == USB_VENDOR_REQUEST_IN) - memcpy(buffer, rt2x00dev->csr_cache, buffer_length); - - return status; -} -EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff); - -/* - * TX data handlers. - */ -static void rt2x00usb_interrupt_txdone(struct urb *urb) -{ - struct data_entry *entry = (struct data_entry *)urb->context; - struct data_ring *ring = entry->ring; - struct rt2x00_dev *rt2x00dev = ring->rt2x00dev; - struct data_desc *txd = (struct data_desc *)entry->skb->data; - u32 word; - int tx_status; - - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || - !__test_and_clear_bit(ENTRY_OWNER_NIC, &entry->flags)) - return; - - rt2x00_desc_read(txd, 0, &word); - - /* - * Remove the descriptor data from the buffer. - */ - skb_pull(entry->skb, ring->desc_size); - - /* - * Obtain the status about this packet. - */ - tx_status = !urb->status ? TX_SUCCESS : TX_FAIL_RETRY; - - rt2x00lib_txdone(entry, tx_status, 0); - - /* - * Make this entry available for reuse. - */ - entry->flags = 0; - rt2x00_ring_index_done_inc(entry->ring); - - /* - * If the data ring was full before the txdone handler - * we must make sure the packet queue in the mac80211 stack - * is reenabled when the txdone handler has finished. - */ - if (!rt2x00_ring_full(ring)) - ieee80211_wake_queue(rt2x00dev->hw, - entry->tx_status.control.queue); -} - -int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev, - struct data_ring *ring, struct sk_buff *skb, - struct ieee80211_tx_control *control) -{ - struct usb_device *usb_dev = - interface_to_usbdev(rt2x00dev_usb(rt2x00dev)); - struct data_entry *entry = rt2x00_get_data_entry(ring); - int pipe = usb_sndbulkpipe(usb_dev, 1); - u32 length; - - if (rt2x00_ring_full(ring)) { - ieee80211_stop_queue(rt2x00dev->hw, control->queue); - return -EINVAL; - } - - if (test_bit(ENTRY_OWNER_NIC, &entry->flags)) { - ERROR(rt2x00dev, - "Arrived at non-free entry in the non-full queue %d.\n" - "Please file bug report to %s.\n", - control->queue, DRV_PROJECT); - ieee80211_stop_queue(rt2x00dev->hw, control->queue); - return -EINVAL; - } - - /* - * Add the descriptor in front of the skb. - */ - skb_push(skb, ring->desc_size); - memset(skb->data, 0, ring->desc_size); - - rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data, - (struct ieee80211_hdr *)(skb->data + - ring->desc_size), - skb->len - ring->desc_size, control); - memcpy(&entry->tx_status.control, control, sizeof(*control)); - entry->skb = skb; - - /* - * USB devices cannot blindly pass the skb->len as the - * length of the data to usb_fill_bulk_urb. Pass the skb - * to the driver to determine what the length should be. - */ - length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, skb); - - /* - * Initialize URB and send the frame to the device. - */ - __set_bit(ENTRY_OWNER_NIC, &entry->flags); - usb_fill_bulk_urb(entry->priv, usb_dev, pipe, - skb->data, length, rt2x00usb_interrupt_txdone, entry); - usb_submit_urb(entry->priv, GFP_ATOMIC); - - rt2x00_ring_index_inc(ring); - - if (rt2x00_ring_full(ring)) - ieee80211_stop_queue(rt2x00dev->hw, control->queue); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00usb_write_tx_data); - -/* - * RX data handlers. - */ -static void rt2x00usb_interrupt_rxdone(struct urb *urb) -{ - struct data_entry *entry = (struct data_entry *)urb->context; - struct data_ring *ring = entry->ring; - struct rt2x00_dev *rt2x00dev = ring->rt2x00dev; - struct sk_buff *skb; - struct ieee80211_hdr *hdr; - struct rxdata_entry_desc desc; - int header_size; - int frame_size; - - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || - !test_and_clear_bit(ENTRY_OWNER_NIC, &entry->flags)) - return; - - /* - * Check if the received data is simply too small - * to be actually valid, or if the urb is signaling - * a problem. - */ - if (urb->actual_length < entry->ring->desc_size || urb->status) - goto skip_entry; - - memset(&desc, 0x00, sizeof(desc)); - rt2x00dev->ops->lib->fill_rxdone(entry, &desc); - - /* - * Allocate a new sk buffer to replace the current one. - * If allocation fails, we should drop the current frame - * so we can recycle the existing sk buffer for the new frame. - * As alignment we use 2 and not NET_IP_ALIGN because we need - * to be sure we have 2 bytes room in the head. (NET_IP_ALIGN - * can be 0 on some hardware). We use these 2 bytes for frame - * alignment later, we assume that the chance that - * header_size % 4 == 2 is bigger then header_size % 2 == 0 - * and thus optimize alignment by reserving the 2 bytes in - * advance. - */ - frame_size = entry->ring->data_size + entry->ring->desc_size; - skb = dev_alloc_skb(frame_size + 2); - if (!skb) - goto skip_entry; - - skb_reserve(skb, 2); - skb_put(skb, frame_size); - - /* - * The data behind the ieee80211 header must be - * aligned on a 4 byte boundary. - * After that trim the entire buffer down to only - * contain the valid frame data excluding the device - * descriptor. - */ - hdr = (struct ieee80211_hdr *)entry->skb->data; - header_size = - ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control)); - - if (header_size % 4 == 0) { - skb_push(entry->skb, 2); - memmove(entry->skb->data, entry->skb->data + 2, skb->len - 2); - } - skb_trim(entry->skb, desc.size); - - /* - * Send the frame to rt2x00lib for further processing. - */ - rt2x00lib_rxdone(entry, entry->skb, &desc); - - /* - * Replace current entry's skb with the newly allocated one, - * and reinitialize the urb. - */ - entry->skb = skb; - urb->transfer_buffer = entry->skb->data; - urb->transfer_buffer_length = entry->skb->len; - -skip_entry: - if (test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags)) { - __set_bit(ENTRY_OWNER_NIC, &entry->flags); - usb_submit_urb(urb, GFP_ATOMIC); - } - - rt2x00_ring_index_inc(ring); -} - -/* - * Radio handlers - */ -void rt2x00usb_enable_radio(struct rt2x00_dev *rt2x00dev) -{ - struct usb_device *usb_dev = - interface_to_usbdev(rt2x00dev_usb(rt2x00dev)); - struct data_ring *ring; - struct data_entry *entry; - unsigned int i; - - /* - * Initialize the TX rings - */ - txringall_for_each(rt2x00dev, ring) { - for (i = 0; i < ring->stats.limit; i++) - ring->entry[i].flags = 0; - - rt2x00_ring_index_clear(ring); - } - - /* - * Initialize and start the RX ring. - */ - rt2x00_ring_index_clear(rt2x00dev->rx); - - for (i = 0; i < rt2x00dev->rx->stats.limit; i++) { - entry = &rt2x00dev->rx->entry[i]; - - usb_fill_bulk_urb(entry->priv, usb_dev, - usb_rcvbulkpipe(usb_dev, 1), - entry->skb->data, entry->skb->len, - rt2x00usb_interrupt_rxdone, entry); - - __set_bit(ENTRY_OWNER_NIC, &entry->flags); - usb_submit_urb(entry->priv, GFP_ATOMIC); - } -} -EXPORT_SYMBOL_GPL(rt2x00usb_enable_radio); - -void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev) -{ - struct data_ring *ring; - unsigned int i; - - rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0x0000, 0x0000, - REGISTER_TIMEOUT); - - /* - * Cancel all rings. - */ - ring_for_each(rt2x00dev, ring) { - for (i = 0; i < ring->stats.limit; i++) - usb_kill_urb(ring->entry[i].priv); - } -} -EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio); - -/* - * Device initialization handlers. - */ -static int rt2x00usb_alloc_urb(struct rt2x00_dev *rt2x00dev, - struct data_ring *ring) -{ - unsigned int i; - - /* - * Allocate the URB's - */ - for (i = 0; i < ring->stats.limit; i++) { - ring->entry[i].priv = usb_alloc_urb(0, GFP_KERNEL); - if (!ring->entry[i].priv) - return -ENOMEM; - } - - return 0; -} - -static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev, - struct data_ring *ring) -{ - unsigned int i; - - if (!ring->entry) - return; - - for (i = 0; i < ring->stats.limit; i++) { - usb_kill_urb(ring->entry[i].priv); - usb_free_urb(ring->entry[i].priv); - if (ring->entry[i].skb) - kfree_skb(ring->entry[i].skb); - } -} - -int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev) -{ - struct data_ring *ring; - struct sk_buff *skb; - unsigned int entry_size; - unsigned int i; - int status; - - /* - * Allocate DMA - */ - ring_for_each(rt2x00dev, ring) { - status = rt2x00usb_alloc_urb(rt2x00dev, ring); - if (status) - goto exit; - } - - /* - * For the RX ring, skb's should be allocated. - */ - entry_size = rt2x00dev->rx->data_size + rt2x00dev->rx->desc_size; - for (i = 0; i < rt2x00dev->rx->stats.limit; i++) { - skb = dev_alloc_skb(NET_IP_ALIGN + entry_size); - if (!skb) - goto exit; - - skb_reserve(skb, NET_IP_ALIGN); - skb_put(skb, entry_size); - - rt2x00dev->rx->entry[i].skb = skb; - } - - return 0; - -exit: - rt2x00usb_uninitialize(rt2x00dev); - - return status; -} -EXPORT_SYMBOL_GPL(rt2x00usb_initialize); - -void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev) -{ - struct data_ring *ring; - - ring_for_each(rt2x00dev, ring) - rt2x00usb_free_urb(rt2x00dev, ring); -} -EXPORT_SYMBOL_GPL(rt2x00usb_uninitialize); - -/* - * USB driver handlers. - */ -static void rt2x00usb_free_reg(struct rt2x00_dev *rt2x00dev) -{ - kfree(rt2x00dev->rf); - rt2x00dev->rf = NULL; - - kfree(rt2x00dev->eeprom); - rt2x00dev->eeprom = NULL; - - kfree(rt2x00dev->csr_cache); - rt2x00dev->csr_cache = NULL; -} - -static int rt2x00usb_alloc_reg(struct rt2x00_dev *rt2x00dev) -{ - rt2x00dev->csr_cache = kzalloc(CSR_CACHE_SIZE, GFP_KERNEL); - if (!rt2x00dev->csr_cache) - goto exit; - - rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL); - if (!rt2x00dev->eeprom) - goto exit; - - rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL); - if (!rt2x00dev->rf) - goto exit; - - return 0; - -exit: - ERROR_PROBE("Failed to allocate registers.\n"); - - rt2x00usb_free_reg(rt2x00dev); - - return -ENOMEM; -} - -int rt2x00usb_probe(struct usb_interface *usb_intf, - const struct usb_device_id *id) -{ - struct usb_device *usb_dev = interface_to_usbdev(usb_intf); - struct rt2x00_ops *ops = (struct rt2x00_ops *)id->driver_info; - struct ieee80211_hw *hw; - struct rt2x00_dev *rt2x00dev; - int retval; - - usb_dev = usb_get_dev(usb_dev); - - hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw); - if (!hw) { - ERROR_PROBE("Failed to allocate hardware.\n"); - retval = -ENOMEM; - goto exit_put_device; - } - - usb_set_intfdata(usb_intf, hw); - - rt2x00dev = hw->priv; - rt2x00dev->dev = usb_intf; - rt2x00dev->ops = ops; - rt2x00dev->hw = hw; - - rt2x00dev->usb_maxpacket = - usb_maxpacket(usb_dev, usb_sndbulkpipe(usb_dev, 1), 1); - if (!rt2x00dev->usb_maxpacket) - rt2x00dev->usb_maxpacket = 1; - - retval = rt2x00usb_alloc_reg(rt2x00dev); - if (retval) - goto exit_free_device; - - retval = rt2x00lib_probe_dev(rt2x00dev); - if (retval) - goto exit_free_reg; - - return 0; - -exit_free_reg: - rt2x00usb_free_reg(rt2x00dev); - -exit_free_device: - ieee80211_free_hw(hw); - -exit_put_device: - usb_put_dev(usb_dev); - - usb_set_intfdata(usb_intf, NULL); - - return retval; -} -EXPORT_SYMBOL_GPL(rt2x00usb_probe); - -void rt2x00usb_disconnect(struct usb_interface *usb_intf) -{ - struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); - struct rt2x00_dev *rt2x00dev = hw->priv; - - /* - * Free all allocated data. - */ - rt2x00lib_remove_dev(rt2x00dev); - rt2x00usb_free_reg(rt2x00dev); - ieee80211_free_hw(hw); - - /* - * Free the USB device data. - */ - usb_set_intfdata(usb_intf, NULL); - usb_put_dev(interface_to_usbdev(usb_intf)); -} -EXPORT_SYMBOL_GPL(rt2x00usb_disconnect); - -#ifdef CONFIG_PM -int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state) -{ - struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); - struct rt2x00_dev *rt2x00dev = hw->priv; - int retval; - - retval = rt2x00lib_suspend(rt2x00dev, state); - if (retval) - return retval; - - rt2x00usb_free_reg(rt2x00dev); - - /* - * Decrease usbdev refcount. - */ - usb_put_dev(interface_to_usbdev(usb_intf)); - - return 0; -} -EXPORT_SYMBOL_GPL(rt2x00usb_suspend); - -int rt2x00usb_resume(struct usb_interface *usb_intf) -{ - struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); - struct rt2x00_dev *rt2x00dev = hw->priv; - int retval; - - usb_get_dev(interface_to_usbdev(usb_intf)); - - retval = rt2x00usb_alloc_reg(rt2x00dev); - if (retval) - return retval; - - retval = rt2x00lib_resume(rt2x00dev); - if (retval) - goto exit_free_reg; - - return 0; - -exit_free_reg: - rt2x00usb_free_reg(rt2x00dev); - - return retval; -} -EXPORT_SYMBOL_GPL(rt2x00usb_resume); -#endif /* CONFIG_PM */ - -/* - * rt2x00pci module information. - */ -MODULE_AUTHOR(DRV_PROJECT); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("rt2x00 library"); -MODULE_LICENSE("GPL"); diff --git a/package/rt2x00/src/rt2x00usb.h b/package/rt2x00/src/rt2x00usb.h deleted file mode 100644 index 2681abe4d49..00000000000 --- a/package/rt2x00/src/rt2x00usb.h +++ /dev/null @@ -1,180 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt2x00usb - Abstract: Data structures for the rt2x00usb module. - */ - -#ifndef RT2X00USB_H -#define RT2X00USB_H - -/* - * This variable should be used with the - * usb_driver structure initialization. - */ -#define USB_DEVICE_DATA(__ops) .driver_info = (kernel_ulong_t)(__ops) - -/* - * Register defines. - * Some registers require multiple attempts before success, - * in those cases REGISTER_BUSY_COUNT attempts should be - * taken with a REGISTER_BUSY_DELAY interval. - * For USB vendor requests we need to pass a timeout - * time in ms, for this we use the REGISTER_TIMEOUT, - * however when loading firmware a higher value is - * required. In that case we use the REGISTER_TIMEOUT_FIRMWARE. - */ -#define REGISTER_BUSY_COUNT 5 -#define REGISTER_BUSY_DELAY 100 -#define REGISTER_TIMEOUT 500 -#define REGISTER_TIMEOUT_FIRMWARE 1000 - -/* - * Cache size - */ -#define CSR_CACHE_SIZE 8 -#define CSR_CACHE_SIZE_FIRMWARE 64 - -/* - * USB request types. - */ -#define USB_VENDOR_REQUEST ( USB_TYPE_VENDOR | USB_RECIP_DEVICE ) -#define USB_VENDOR_REQUEST_IN ( USB_DIR_IN | USB_VENDOR_REQUEST ) -#define USB_VENDOR_REQUEST_OUT ( USB_DIR_OUT | USB_VENDOR_REQUEST ) - -/* - * USB vendor commands. - */ -#define USB_DEVICE_MODE 0x01 -#define USB_SINGLE_WRITE 0x02 -#define USB_SINGLE_READ 0x03 -#define USB_MULTI_WRITE 0x06 -#define USB_MULTI_READ 0x07 -#define USB_EEPROM_WRITE 0x08 -#define USB_EEPROM_READ 0x09 -#define USB_LED_CONTROL 0x0a /* RT73USB */ -#define USB_RX_CONTROL 0x0c - -/* - * Device modes offset - */ -#define USB_MODE_RESET 0x01 -#define USB_MODE_UNPLUG 0x02 -#define USB_MODE_FUNCTION 0x03 -#define USB_MODE_TEST 0x04 -#define USB_MODE_SLEEP 0x07 /* RT73USB */ -#define USB_MODE_FIRMWARE 0x08 /* RT73USB */ -#define USB_MODE_WAKEUP 0x09 /* RT73USB */ - -/* - * Used to read/write from/to the device. - * This is the main function to communicate with the device, - * the buffer argument _must_ either be NULL or point to - * a buffer allocated by kmalloc. Failure to do so can lead - * to unexpected behavior depending on the architecture. - */ -int rt2x00usb_vendor_request(const struct rt2x00_dev *rt2x00dev, - const u8 request, const u8 requesttype, - const u16 offset, const u16 value, - void *buffer, const u16 buffer_length, - const int timeout); - -/* - * Used to read/write from/to the device. - * This function will use a previously with kmalloc allocated cache - * to communicate with the device. The contents of the buffer pointer - * will be copied to this cache when writing, or read from the cache - * when reading. - * Buffers send to rt2x00usb_vendor_request _must_ be allocated with - * kmalloc. Hence the reason for using a previously allocated cache - * which has been allocated properly. - */ -int rt2x00usb_vendor_request_buff(const struct rt2x00_dev *rt2x00dev, - const u8 request, const u8 requesttype, - const u16 offset, void *buffer, - const u16 buffer_length, const int timeout); - -/* - * Simple wrapper around rt2x00usb_vendor_request to write a single - * command to the device. Since we don't use the buffer argument we - * don't have to worry about kmalloc here. - */ -static inline int rt2x00usb_vendor_request_sw(const struct rt2x00_dev - *rt2x00dev, - const u8 request, - const u16 offset, - const u16 value, - const int timeout) -{ - return rt2x00usb_vendor_request(rt2x00dev, request, - USB_VENDOR_REQUEST_OUT, offset, - value, NULL, 0, timeout); -} - -/* - * Simple wrapper around rt2x00usb_vendor_request to read the eeprom - * from the device. Note that the eeprom argument _must_ be allocated using - * kmalloc for correct handling inside the kernel USB layer. - */ -static inline int rt2x00usb_eeprom_read(const struct rt2x00_dev *rt2x00dev, - __le16 *eeprom, const u16 lenght) -{ - int timeout = REGISTER_TIMEOUT * (lenght / sizeof(u16)); - - return rt2x00usb_vendor_request(rt2x00dev, USB_EEPROM_READ, - USB_VENDOR_REQUEST_IN, 0x0000, - 0x0000, eeprom, lenght, timeout); -} - -/* - * Radio handlers - */ -void rt2x00usb_enable_radio(struct rt2x00_dev *rt2x00dev); -void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev); - -/* - * TX data handlers. - */ -int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev, - struct data_ring *ring, struct sk_buff *skb, - struct ieee80211_tx_control *control); - -/* - * Device initialization handlers. - */ -int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev); -void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev); - -/* - * USB driver handlers. - */ -int rt2x00usb_probe(struct usb_interface *usb_intf, - const struct usb_device_id *id); -void rt2x00usb_disconnect(struct usb_interface *usb_intf); -#ifdef CONFIG_PM -int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state); -int rt2x00usb_resume(struct usb_interface *usb_intf); -#else -#define rt2x00usb_suspend NULL -#define rt2x00usb_resume NULL -#endif /* CONFIG_PM */ - -#endif /* RT2X00USB_H */ diff --git a/package/rt2x00/src/rt61pci.c b/package/rt2x00/src/rt61pci.c deleted file mode 100644 index ecae968ce09..00000000000 --- a/package/rt2x00/src/rt61pci.c +++ /dev/null @@ -1,2569 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt61pci - Abstract: rt61pci device specific routines. - Supported chipsets: RT2561, RT2561s, RT2661. - */ - -/* - * Set enviroment defines for rt2x00.h - */ -#define DRV_NAME "rt61pci" - -#include -#include -#include -#include -#include -#include -#include - -#include "rt2x00.h" -#include "rt2x00pci.h" -#include "rt61pci.h" - -/* - * Register access. - * BBP and RF register require indirect register access, - * and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this. - * These indirect registers work with busy bits, - * and we will try maximal REGISTER_BUSY_COUNT times to access - * the register while taking a REGISTER_BUSY_DELAY us delay - * between each attampt. When the busy bit is still set at that time, - * the access attempt is considered to have failed, - * and we will print an error. - */ -static u32 rt61pci_bbp_check(const struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - unsigned int i; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, PHY_CSR3, ®); - if (!rt2x00_get_field32(reg, PHY_CSR3_BUSY)) - break; - udelay(REGISTER_BUSY_DELAY); - } - - return reg; -} - -static void rt61pci_bbp_write(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u8 value) -{ - u32 reg; - - /* - * Wait until the BBP becomes ready. - */ - reg = rt61pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n"); - return; - } - - /* - * Write the data into the BBP. - */ - reg = 0; - rt2x00_set_field32(®, PHY_CSR3_VALUE, value); - rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); - rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); - rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 0); - - rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg); -} - -static void rt61pci_bbp_read(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, u8 *value) -{ - u32 reg; - - /* - * Wait until the BBP becomes ready. - */ - reg = rt61pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n"); - return; - } - - /* - * Write the request into the BBP. - */ - reg = 0; - rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); - rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); - rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 1); - - rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg); - - /* - * Wait until the BBP becomes ready. - */ - reg = rt61pci_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n"); - *value = 0xff; - return; - } - - *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE); -} - -static void rt61pci_rf_write(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u32 value) -{ - u32 reg; - unsigned int i; - - if (!word) - return; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, PHY_CSR4, ®); - if (!rt2x00_get_field32(reg, PHY_CSR4_BUSY)) - goto rf_write; - udelay(REGISTER_BUSY_DELAY); - } - - ERROR(rt2x00dev, "PHY_CSR4 register busy. Write failed.\n"); - return; - -rf_write: - reg = 0; - rt2x00_set_field32(®, PHY_CSR4_VALUE, value); - rt2x00_set_field32(®, PHY_CSR4_NUMBER_OF_BITS, 21); - rt2x00_set_field32(®, PHY_CSR4_IF_SELECT, 0); - rt2x00_set_field32(®, PHY_CSR4_BUSY, 1); - - rt2x00pci_register_write(rt2x00dev, PHY_CSR4, reg); - rt2x00_rf_write(rt2x00dev, word, value); -} - -static void rt61pci_mcu_request(const struct rt2x00_dev *rt2x00dev, - const u8 command, const u8 token, - const u8 arg0, const u8 arg1) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, H2M_MAILBOX_CSR, ®); - - if (rt2x00_get_field32(reg, H2M_MAILBOX_CSR_OWNER)) { - ERROR(rt2x00dev, "mcu request error. " - "Request 0x%02x failed for token 0x%02x.\n", - command, token); - return; - } - - rt2x00_set_field32(®, H2M_MAILBOX_CSR_OWNER, 1); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_CMD_TOKEN, token); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG0, arg0); - rt2x00_set_field32(®, H2M_MAILBOX_CSR_ARG1, arg1); - rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg); - - rt2x00pci_register_read(rt2x00dev, HOST_CMD_CSR, ®); - rt2x00_set_field32(®, HOST_CMD_CSR_HOST_COMMAND, command); - rt2x00_set_field32(®, HOST_CMD_CSR_INTERRUPT_MCU, 1); - rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg); -} - -static void rt61pci_eepromregister_read(struct eeprom_93cx6 *eeprom) -{ - struct rt2x00_dev *rt2x00dev = eeprom->data; - u32 reg; - - rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, ®); - - eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN); - eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT); - eeprom->reg_data_clock = - !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_CLOCK); - eeprom->reg_chip_select = - !!rt2x00_get_field32(reg, E2PROM_CSR_CHIP_SELECT); -} - -static void rt61pci_eepromregister_write(struct eeprom_93cx6 *eeprom) -{ - struct rt2x00_dev *rt2x00dev = eeprom->data; - u32 reg = 0; - - rt2x00_set_field32(®, E2PROM_CSR_DATA_IN, !!eeprom->reg_data_in); - rt2x00_set_field32(®, E2PROM_CSR_DATA_OUT, !!eeprom->reg_data_out); - rt2x00_set_field32(®, E2PROM_CSR_DATA_CLOCK, - !!eeprom->reg_data_clock); - rt2x00_set_field32(®, E2PROM_CSR_CHIP_SELECT, - !!eeprom->reg_chip_select); - - rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg); -} - -#ifdef CONFIG_RT2X00_LIB_DEBUGFS -#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) ) - -static void rt61pci_read_csr(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 *data) -{ - rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data); -} - -static void rt61pci_write_csr(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 data) -{ - rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data); -} - -static const struct rt2x00debug rt61pci_rt2x00debug = { - .owner = THIS_MODULE, - .csr = { - .read = rt61pci_read_csr, - .write = rt61pci_write_csr, - .word_size = sizeof(u32), - .word_count = CSR_REG_SIZE / sizeof(u32), - }, - .eeprom = { - .read = rt2x00_eeprom_read, - .write = rt2x00_eeprom_write, - .word_size = sizeof(u16), - .word_count = EEPROM_SIZE / sizeof(u16), - }, - .bbp = { - .read = rt61pci_bbp_read, - .write = rt61pci_bbp_write, - .word_size = sizeof(u8), - .word_count = BBP_SIZE / sizeof(u8), - }, - .rf = { - .read = rt2x00_rf_read, - .write = rt61pci_rf_write, - .word_size = sizeof(u32), - .word_count = RF_SIZE / sizeof(u32), - }, -}; -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ - -#ifdef CONFIG_RT61PCI_RFKILL -static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®); - return rt2x00_get_field32(reg, MAC_CSR13_BIT5);; -} -#else -#define rt61pci_rfkill_poll NULL -#endif /* CONFIG_RT61PCI_RFKILL */ - -/* - * Configuration handlers. - */ -static void rt61pci_config_mac_addr(struct rt2x00_dev *rt2x00dev, __le32 *mac) -{ - u32 tmp; - - tmp = le32_to_cpu(mac[1]); - rt2x00_set_field32(&tmp, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff); - mac[1] = cpu_to_le32(tmp); - - rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR2, mac, - (2 * sizeof(__le32))); -} - -static void rt61pci_config_bssid(struct rt2x00_dev *rt2x00dev, __le32 *bssid) -{ - u32 tmp; - - tmp = le32_to_cpu(bssid[1]); - rt2x00_set_field32(&tmp, MAC_CSR5_BSS_ID_MASK, 3); - bssid[1] = cpu_to_le32(tmp); - - rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR4, bssid, - (2 * sizeof(__le32))); -} - -static void rt61pci_config_type(struct rt2x00_dev *rt2x00dev, const int type, - const int tsf_sync) -{ - u32 reg; - - /* - * Clear current synchronisation setup. - * For the Beacon base registers we only need to clear - * the first byte since that byte contains the VALID and OWNER - * bits which (when set to 0) will invalidate the entire beacon. - */ - rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0); - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0); - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0); - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0); - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0); - - /* - * Enable synchronisation. - */ - rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); - rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); - rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, tsf_sync); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); -} - -static void rt61pci_config_preamble(struct rt2x00_dev *rt2x00dev, - const int short_preamble, - const int ack_timeout, - const int ack_consume_time) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, ack_timeout); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); - - rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, ®); - rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE, - !!short_preamble); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg); -} - -static void rt61pci_config_phymode(struct rt2x00_dev *rt2x00dev, - const int basic_rate_mask) -{ - rt2x00pci_register_write(rt2x00dev, TXRX_CSR5, basic_rate_mask); -} - -static void rt61pci_config_channel(struct rt2x00_dev *rt2x00dev, - struct rf_channel *rf, const int txpower) -{ - u8 r3; - u8 r94; - u8 smart; - - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); - rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); - - smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) || - rt2x00_rf(&rt2x00dev->chip, RF2527)); - - rt61pci_bbp_read(rt2x00dev, 3, &r3); - rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart); - rt61pci_bbp_write(rt2x00dev, 3, r3); - - r94 = 6; - if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94)) - r94 += txpower - MAX_TXPOWER; - else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94)) - r94 += txpower; - rt61pci_bbp_write(rt2x00dev, 94, r94); - - rt61pci_rf_write(rt2x00dev, 1, rf->rf1); - rt61pci_rf_write(rt2x00dev, 2, rf->rf2); - rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt61pci_rf_write(rt2x00dev, 4, rf->rf4); - - udelay(200); - - rt61pci_rf_write(rt2x00dev, 1, rf->rf1); - rt61pci_rf_write(rt2x00dev, 2, rf->rf2); - rt61pci_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); - rt61pci_rf_write(rt2x00dev, 4, rf->rf4); - - udelay(200); - - rt61pci_rf_write(rt2x00dev, 1, rf->rf1); - rt61pci_rf_write(rt2x00dev, 2, rf->rf2); - rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt61pci_rf_write(rt2x00dev, 4, rf->rf4); - - msleep(1); -} - -static void rt61pci_config_txpower(struct rt2x00_dev *rt2x00dev, - const int txpower) -{ - struct rf_channel rf; - - rt2x00_rf_read(rt2x00dev, 1, &rf.rf1); - rt2x00_rf_read(rt2x00dev, 2, &rf.rf2); - rt2x00_rf_read(rt2x00dev, 3, &rf.rf3); - rt2x00_rf_read(rt2x00dev, 4, &rf.rf4); - - rt61pci_config_channel(rt2x00dev, &rf, txpower); -} - -static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev, - const int antenna_tx, - const int antenna_rx) -{ - u8 r3; - u8 r4; - u8 r77; - - rt61pci_bbp_read(rt2x00dev, 3, &r3); - rt61pci_bbp_read(rt2x00dev, 4, &r4); - rt61pci_bbp_read(rt2x00dev, 77, &r77); - - rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, - !rt2x00_rf(&rt2x00dev->chip, RF5225)); - - switch (antenna_rx) { - case ANTENNA_SW_DIVERSITY: - case ANTENNA_HW_DIVERSITY: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); - rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, - !!(rt2x00dev->curr_hwmode != HWMODE_A)); - break; - case ANTENNA_A: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); - rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - - if (rt2x00dev->curr_hwmode == HWMODE_A) - rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); - else - rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); - break; - case ANTENNA_B: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); - rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - - if (rt2x00dev->curr_hwmode == HWMODE_A) - rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); - else - rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); - break; - } - - rt61pci_bbp_write(rt2x00dev, 77, r77); - rt61pci_bbp_write(rt2x00dev, 3, r3); - rt61pci_bbp_write(rt2x00dev, 4, r4); -} - -static void rt61pci_config_antenna_2x(struct rt2x00_dev *rt2x00dev, - const int antenna_tx, - const int antenna_rx) -{ - u8 r3; - u8 r4; - u8 r77; - - rt61pci_bbp_read(rt2x00dev, 3, &r3); - rt61pci_bbp_read(rt2x00dev, 4, &r4); - rt61pci_bbp_read(rt2x00dev, 77, &r77); - - rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, - !rt2x00_rf(&rt2x00dev->chip, RF2527)); - rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, - !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags)); - - switch (antenna_rx) { - case ANTENNA_SW_DIVERSITY: - case ANTENNA_HW_DIVERSITY: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); - break; - case ANTENNA_A: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); - rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); - break; - case ANTENNA_B: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); - rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); - break; - } - - rt61pci_bbp_write(rt2x00dev, 77, r77); - rt61pci_bbp_write(rt2x00dev, 3, r3); - rt61pci_bbp_write(rt2x00dev, 4, r4); -} - -static void rt61pci_config_antenna_2529_rx(struct rt2x00_dev *rt2x00dev, - const int p1, const int p2) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®); - - if (p1 != 0xff) { - rt2x00_set_field32(®, MAC_CSR13_BIT4, !!p1); - rt2x00_set_field32(®, MAC_CSR13_BIT12, 0); - rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg); - } - if (p2 != 0xff) { - rt2x00_set_field32(®, MAC_CSR13_BIT3, !p2); - rt2x00_set_field32(®, MAC_CSR13_BIT11, 0); - rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg); - } -} - -static void rt61pci_config_antenna_2529(struct rt2x00_dev *rt2x00dev, - const int antenna_tx, - const int antenna_rx) -{ - u16 eeprom; - u8 r3; - u8 r4; - u8 r77; - - rt61pci_bbp_read(rt2x00dev, 3, &r3); - rt61pci_bbp_read(rt2x00dev, 4, &r4); - rt61pci_bbp_read(rt2x00dev, 77, &r77); - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); - - rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0); - - if (rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY) && - rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY)) { - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); - rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 1); - rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 1); - } else if (rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY)) { - if (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED) >= 2) { - rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); - rt61pci_bbp_write(rt2x00dev, 77, r77); - } - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); - rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1); - } else if (!rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY) && - rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY)) { - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); - rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - - switch (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED)) { - case 0: - rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 1); - break; - case 1: - rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 0); - break; - case 2: - rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0); - break; - case 3: - rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1); - break; - } - } else if (!rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY) && - !rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY)) { - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); - rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - - switch (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_RX_FIXED)) { - case 0: - rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); - rt61pci_bbp_write(rt2x00dev, 77, r77); - rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 1); - break; - case 1: - rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); - rt61pci_bbp_write(rt2x00dev, 77, r77); - rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 0); - break; - case 2: - rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); - rt61pci_bbp_write(rt2x00dev, 77, r77); - rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0); - break; - case 3: - rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); - rt61pci_bbp_write(rt2x00dev, 77, r77); - rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1); - break; - } - } - - rt61pci_bbp_write(rt2x00dev, 3, r3); - rt61pci_bbp_write(rt2x00dev, 4, r4); -} - -struct antenna_sel { - u8 word; - /* - * value[0] -> non-LNA - * value[1] -> LNA - */ - u8 value[2]; -}; - -static const struct antenna_sel antenna_sel_a[] = { - { 96, { 0x58, 0x78 } }, - { 104, { 0x38, 0x48 } }, - { 75, { 0xfe, 0x80 } }, - { 86, { 0xfe, 0x80 } }, - { 88, { 0xfe, 0x80 } }, - { 35, { 0x60, 0x60 } }, - { 97, { 0x58, 0x58 } }, - { 98, { 0x58, 0x58 } }, -}; - -static const struct antenna_sel antenna_sel_bg[] = { - { 96, { 0x48, 0x68 } }, - { 104, { 0x2c, 0x3c } }, - { 75, { 0xfe, 0x80 } }, - { 86, { 0xfe, 0x80 } }, - { 88, { 0xfe, 0x80 } }, - { 35, { 0x50, 0x50 } }, - { 97, { 0x48, 0x48 } }, - { 98, { 0x48, 0x48 } }, -}; - -static void rt61pci_config_antenna(struct rt2x00_dev *rt2x00dev, - const int antenna_tx, const int antenna_rx) -{ - const struct antenna_sel *sel; - unsigned int lna; - unsigned int i; - u32 reg; - - rt2x00pci_register_read(rt2x00dev, PHY_CSR0, ®); - - if (rt2x00dev->curr_hwmode == HWMODE_A) { - sel = antenna_sel_a; - lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); - - rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, 0); - rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, 1); - } else { - sel = antenna_sel_bg; - lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); - - rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, 1); - rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, 0); - } - - for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++) - rt61pci_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]); - - rt2x00pci_register_write(rt2x00dev, PHY_CSR0, reg); - - if (rt2x00_rf(&rt2x00dev->chip, RF5225) || - rt2x00_rf(&rt2x00dev->chip, RF5325)) - rt61pci_config_antenna_5x(rt2x00dev, antenna_tx, antenna_rx); - else if (rt2x00_rf(&rt2x00dev->chip, RF2527)) - rt61pci_config_antenna_2x(rt2x00dev, antenna_tx, antenna_rx); - else if (rt2x00_rf(&rt2x00dev->chip, RF2529)) { - if (test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags)) - rt61pci_config_antenna_2x(rt2x00dev, antenna_tx, - antenna_rx); - else - rt61pci_config_antenna_2529(rt2x00dev, antenna_tx, - antenna_rx); - } -} - -static void rt61pci_config_duration(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, MAC_CSR9, ®); - rt2x00_set_field32(®, MAC_CSR9_SLOT_TIME, libconf->slot_time); - rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg); - - rt2x00pci_register_read(rt2x00dev, MAC_CSR8, ®); - rt2x00_set_field32(®, MAC_CSR8_SIFS, libconf->sifs); - rt2x00_set_field32(®, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3); - rt2x00_set_field32(®, MAC_CSR8_EIFS, libconf->eifs); - rt2x00pci_register_write(rt2x00dev, MAC_CSR8, reg); - - rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); - - rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, ®); - rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_ENABLE, 1); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg); - - rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, - libconf->conf->beacon_int * 16); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); -} - -static void rt61pci_config(struct rt2x00_dev *rt2x00dev, - const unsigned int flags, - struct rt2x00lib_conf *libconf) -{ - if (flags & CONFIG_UPDATE_PHYMODE) - rt61pci_config_phymode(rt2x00dev, libconf->basic_rates); - if (flags & CONFIG_UPDATE_CHANNEL) - rt61pci_config_channel(rt2x00dev, &libconf->rf, - libconf->conf->power_level); - if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL)) - rt61pci_config_txpower(rt2x00dev, libconf->conf->power_level); - if (flags & CONFIG_UPDATE_ANTENNA) - rt61pci_config_antenna(rt2x00dev, libconf->conf->antenna_sel_tx, - libconf->conf->antenna_sel_rx); - if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT)) - rt61pci_config_duration(rt2x00dev, libconf); -} - -/* - * LED functions. - */ -static void rt61pci_enable_led(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - u16 led_reg; - u8 arg0; - u8 arg1; - - rt2x00pci_register_read(rt2x00dev, MAC_CSR14, ®); - rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, 70); - rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, 30); - rt2x00pci_register_write(rt2x00dev, MAC_CSR14, reg); - - led_reg = rt2x00dev->led_reg; - rt2x00_set_field16(&led_reg, MCU_LEDCS_RADIO_STATUS, 1); - if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) - rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_A_STATUS, 1); - else - rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_BG_STATUS, 1); - - arg0 = led_reg & 0xff; - arg1 = (led_reg >> 8) & 0xff; - - rt61pci_mcu_request(rt2x00dev, MCU_LED, 0xff, arg0, arg1); -} - -static void rt61pci_disable_led(struct rt2x00_dev *rt2x00dev) -{ - u16 led_reg; - u8 arg0; - u8 arg1; - - led_reg = rt2x00dev->led_reg; - rt2x00_set_field16(&led_reg, MCU_LEDCS_RADIO_STATUS, 0); - rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_BG_STATUS, 0); - rt2x00_set_field16(&led_reg, MCU_LEDCS_LINK_A_STATUS, 0); - - arg0 = led_reg & 0xff; - arg1 = (led_reg >> 8) & 0xff; - - rt61pci_mcu_request(rt2x00dev, MCU_LED, 0xff, arg0, arg1); -} - -static void rt61pci_activity_led(struct rt2x00_dev *rt2x00dev, int rssi) -{ - u8 led; - - if (rt2x00dev->led_mode != LED_MODE_SIGNAL_STRENGTH) - return; - - /* - * Led handling requires a positive value for the rssi, - * to do that correctly we need to add the correction. - */ - rssi += rt2x00dev->rssi_offset; - - if (rssi <= 30) - led = 0; - else if (rssi <= 39) - led = 1; - else if (rssi <= 49) - led = 2; - else if (rssi <= 53) - led = 3; - else if (rssi <= 63) - led = 4; - else - led = 5; - - rt61pci_mcu_request(rt2x00dev, MCU_LED_STRENGTH, 0xff, led, 0); -} - -/* - * Link tuning - */ -static void rt61pci_link_stats(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - /* - * Update FCS error count from register. - */ - rt2x00pci_register_read(rt2x00dev, STA_CSR0, ®); - rt2x00dev->link.rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR); - - /* - * Update False CCA count from register. - */ - rt2x00pci_register_read(rt2x00dev, STA_CSR1, ®); - rt2x00dev->link.false_cca = - rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR); -} - -static void rt61pci_reset_tuner(struct rt2x00_dev *rt2x00dev) -{ - rt61pci_bbp_write(rt2x00dev, 17, 0x20); - rt2x00dev->link.vgc_level = 0x20; -} - -static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev) -{ - int rssi = rt2x00_get_link_rssi(&rt2x00dev->link); - u8 r17; - u8 up_bound; - u8 low_bound; - - /* - * Update Led strength - */ - rt61pci_activity_led(rt2x00dev, rssi); - - rt61pci_bbp_read(rt2x00dev, 17, &r17); - - /* - * Determine r17 bounds. - */ - if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) { - low_bound = 0x28; - up_bound = 0x48; - if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) { - low_bound += 0x10; - up_bound += 0x10; - } - } else { - low_bound = 0x20; - up_bound = 0x40; - if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) { - low_bound += 0x10; - up_bound += 0x10; - } - } - - /* - * Special big-R17 for very short distance - */ - if (rssi >= -35) { - if (r17 != 0x60) - rt61pci_bbp_write(rt2x00dev, 17, 0x60); - return; - } - - /* - * Special big-R17 for short distance - */ - if (rssi >= -58) { - if (r17 != up_bound) - rt61pci_bbp_write(rt2x00dev, 17, up_bound); - return; - } - - /* - * Special big-R17 for middle-short distance - */ - if (rssi >= -66) { - low_bound += 0x10; - if (r17 != low_bound) - rt61pci_bbp_write(rt2x00dev, 17, low_bound); - return; - } - - /* - * Special mid-R17 for middle distance - */ - if (rssi >= -74) { - low_bound += 0x08; - if (r17 != low_bound) - rt61pci_bbp_write(rt2x00dev, 17, low_bound); - return; - } - - /* - * Special case: Change up_bound based on the rssi. - * Lower up_bound when rssi is weaker then -74 dBm. - */ - up_bound -= 2 * (-74 - rssi); - if (low_bound > up_bound) - up_bound = low_bound; - - if (r17 > up_bound) { - rt61pci_bbp_write(rt2x00dev, 17, up_bound); - return; - } - - /* - * r17 does not yet exceed upper limit, continue and base - * the r17 tuning on the false CCA count. - */ - if (rt2x00dev->link.false_cca > 512 && r17 < up_bound) { - if (++r17 > up_bound) - r17 = up_bound; - rt61pci_bbp_write(rt2x00dev, 17, r17); - } else if (rt2x00dev->link.false_cca < 100 && r17 > low_bound) { - if (--r17 < low_bound) - r17 = low_bound; - rt61pci_bbp_write(rt2x00dev, 17, r17); - } -} - -/* - * Firmware name function. - */ -static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev) -{ - char *fw_name; - - switch (rt2x00dev->chip.rt) { - case RT2561: - fw_name = FIRMWARE_RT2561; - break; - case RT2561s: - fw_name = FIRMWARE_RT2561s; - break; - case RT2661: - fw_name = FIRMWARE_RT2661; - break; - default: - fw_name = NULL; - break; - } - - return fw_name; -} - -/* - * Initialization functions. - */ -static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, void *data, - const size_t len) -{ - int i; - u32 reg; - - /* - * Wait for stable hardware. - */ - for (i = 0; i < 100; i++) { - rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®); - if (reg) - break; - msleep(1); - } - - if (!reg) { - ERROR(rt2x00dev, "Unstable hardware.\n"); - return -EBUSY; - } - - /* - * Prepare MCU and mailbox for firmware loading. - */ - reg = 0; - rt2x00_set_field32(®, MCU_CNTL_CSR_RESET, 1); - rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg); - rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff); - rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); - rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, 0); - - /* - * Write firmware to device. - */ - reg = 0; - rt2x00_set_field32(®, MCU_CNTL_CSR_RESET, 1); - rt2x00_set_field32(®, MCU_CNTL_CSR_SELECT_BANK, 1); - rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg); - - rt2x00pci_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, - data, len); - - rt2x00_set_field32(®, MCU_CNTL_CSR_SELECT_BANK, 0); - rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg); - - rt2x00_set_field32(®, MCU_CNTL_CSR_RESET, 0); - rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg); - - for (i = 0; i < 100; i++) { - rt2x00pci_register_read(rt2x00dev, MCU_CNTL_CSR, ®); - if (rt2x00_get_field32(reg, MCU_CNTL_CSR_READY)) - break; - msleep(1); - } - - if (i == 100) { - ERROR(rt2x00dev, "MCU Control register not ready.\n"); - return -EBUSY; - } - - /* - * Reset MAC and BBP registers. - */ - reg = 0; - rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 1); - rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 1); - rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); - - rt2x00pci_register_read(rt2x00dev, MAC_CSR1, ®); - rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 0); - rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 0); - rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); - - rt2x00pci_register_read(rt2x00dev, MAC_CSR1, ®); - rt2x00_set_field32(®, MAC_CSR1_HOST_READY, 1); - rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); - - return 0; -} - -static void rt61pci_init_rxring(struct rt2x00_dev *rt2x00dev) -{ - struct data_ring *ring = rt2x00dev->rx; - struct data_desc *rxd; - unsigned int i; - u32 word; - - memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring)); - - for (i = 0; i < ring->stats.limit; i++) { - rxd = ring->entry[i].priv; - - rt2x00_desc_read(rxd, 5, &word); - rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS, - ring->entry[i].data_dma); - rt2x00_desc_write(rxd, 5, word); - - rt2x00_desc_read(rxd, 0, &word); - rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); - rt2x00_desc_write(rxd, 0, word); - } - - rt2x00_ring_index_clear(rt2x00dev->rx); -} - -static void rt61pci_init_txring(struct rt2x00_dev *rt2x00dev, const int queue) -{ - struct data_ring *ring = rt2x00lib_get_ring(rt2x00dev, queue); - struct data_desc *txd; - unsigned int i; - u32 word; - - memset(ring->data_addr, 0x00, rt2x00_get_ring_size(ring)); - - for (i = 0; i < ring->stats.limit; i++) { - txd = ring->entry[i].priv; - - rt2x00_desc_read(txd, 1, &word); - rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1); - rt2x00_desc_write(txd, 1, word); - - rt2x00_desc_read(txd, 5, &word); - rt2x00_set_field32(&word, TXD_W5_PID_TYPE, queue); - rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, i); - rt2x00_desc_write(txd, 5, word); - - rt2x00_desc_read(txd, 6, &word); - rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS, - ring->entry[i].data_dma); - rt2x00_desc_write(txd, 6, word); - - rt2x00_desc_read(txd, 0, &word); - rt2x00_set_field32(&word, TXD_W0_VALID, 0); - rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); - rt2x00_desc_write(txd, 0, word); - } - - rt2x00_ring_index_clear(ring); -} - -static int rt61pci_init_rings(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - /* - * Initialize rings. - */ - rt61pci_init_rxring(rt2x00dev); - rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA0); - rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA1); - rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA2); - rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA3); - rt61pci_init_txring(rt2x00dev, IEEE80211_TX_QUEUE_DATA4); - - /* - * Initialize registers. - */ - rt2x00pci_register_read(rt2x00dev, TX_RING_CSR0, ®); - rt2x00_set_field32(®, TX_RING_CSR0_AC0_RING_SIZE, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].stats.limit); - rt2x00_set_field32(®, TX_RING_CSR0_AC1_RING_SIZE, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].stats.limit); - rt2x00_set_field32(®, TX_RING_CSR0_AC2_RING_SIZE, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA2].stats.limit); - rt2x00_set_field32(®, TX_RING_CSR0_AC3_RING_SIZE, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA3].stats.limit); - rt2x00pci_register_write(rt2x00dev, TX_RING_CSR0, reg); - - rt2x00pci_register_read(rt2x00dev, TX_RING_CSR1, ®); - rt2x00_set_field32(®, TX_RING_CSR1_MGMT_RING_SIZE, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA4].stats.limit); - rt2x00_set_field32(®, TX_RING_CSR1_TXD_SIZE, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].desc_size / - 4); - rt2x00pci_register_write(rt2x00dev, TX_RING_CSR1, reg); - - rt2x00pci_register_read(rt2x00dev, AC0_BASE_CSR, ®); - rt2x00_set_field32(®, AC0_BASE_CSR_RING_REGISTER, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA0].data_dma); - rt2x00pci_register_write(rt2x00dev, AC0_BASE_CSR, reg); - - rt2x00pci_register_read(rt2x00dev, AC1_BASE_CSR, ®); - rt2x00_set_field32(®, AC1_BASE_CSR_RING_REGISTER, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA1].data_dma); - rt2x00pci_register_write(rt2x00dev, AC1_BASE_CSR, reg); - - rt2x00pci_register_read(rt2x00dev, AC2_BASE_CSR, ®); - rt2x00_set_field32(®, AC2_BASE_CSR_RING_REGISTER, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA2].data_dma); - rt2x00pci_register_write(rt2x00dev, AC2_BASE_CSR, reg); - - rt2x00pci_register_read(rt2x00dev, AC3_BASE_CSR, ®); - rt2x00_set_field32(®, AC3_BASE_CSR_RING_REGISTER, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA3].data_dma); - rt2x00pci_register_write(rt2x00dev, AC3_BASE_CSR, reg); - - rt2x00pci_register_read(rt2x00dev, MGMT_BASE_CSR, ®); - rt2x00_set_field32(®, MGMT_BASE_CSR_RING_REGISTER, - rt2x00dev->tx[IEEE80211_TX_QUEUE_DATA4].data_dma); - rt2x00pci_register_write(rt2x00dev, MGMT_BASE_CSR, reg); - - rt2x00pci_register_read(rt2x00dev, RX_RING_CSR, ®); - rt2x00_set_field32(®, RX_RING_CSR_RING_SIZE, - rt2x00dev->rx->stats.limit); - rt2x00_set_field32(®, RX_RING_CSR_RXD_SIZE, - rt2x00dev->rx->desc_size / 4); - rt2x00_set_field32(®, RX_RING_CSR_RXD_WRITEBACK_SIZE, 4); - rt2x00pci_register_write(rt2x00dev, RX_RING_CSR, reg); - - rt2x00pci_register_read(rt2x00dev, RX_BASE_CSR, ®); - rt2x00_set_field32(®, RX_BASE_CSR_RING_REGISTER, - rt2x00dev->rx->data_dma); - rt2x00pci_register_write(rt2x00dev, RX_BASE_CSR, reg); - - rt2x00pci_register_read(rt2x00dev, TX_DMA_DST_CSR, ®); - rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC0, 2); - rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC1, 2); - rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC2, 2); - rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_AC3, 2); - rt2x00_set_field32(®, TX_DMA_DST_CSR_DEST_MGMT, 0); - rt2x00pci_register_write(rt2x00dev, TX_DMA_DST_CSR, reg); - - rt2x00pci_register_read(rt2x00dev, LOAD_TX_RING_CSR, ®); - rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC0, 1); - rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC1, 1); - rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC2, 1); - rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_AC3, 1); - rt2x00_set_field32(®, LOAD_TX_RING_CSR_LOAD_TXD_MGMT, 1); - rt2x00pci_register_write(rt2x00dev, LOAD_TX_RING_CSR, reg); - - rt2x00pci_register_read(rt2x00dev, RX_CNTL_CSR, ®); - rt2x00_set_field32(®, RX_CNTL_CSR_LOAD_RXD, 1); - rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg); - - return 0; -} - -static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_AUTO_TX_SEQ, 1); - rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, 0); - rt2x00_set_field32(®, TXRX_CSR0_TX_WITHOUT_WAITING, 0); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); - - rt2x00pci_register_read(rt2x00dev, TXRX_CSR1, ®); - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */ - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID1, 30); /* Rssi */ - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID1_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID2, 42); /* OFDM Rate */ - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID2_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3, 30); /* Rssi */ - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3_VALID, 1); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR1, reg); - - /* - * CCK TXD BBP registers - */ - rt2x00pci_register_read(rt2x00dev, TXRX_CSR2, ®); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0, 13); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID1, 12); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID1_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID2, 11); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID2_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3, 10); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3_VALID, 1); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR2, reg); - - /* - * OFDM TXD BBP registers - */ - rt2x00pci_register_read(rt2x00dev, TXRX_CSR3, ®); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0, 7); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1, 6); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2, 5); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2_VALID, 1); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR3, reg); - - rt2x00pci_register_read(rt2x00dev, TXRX_CSR7, ®); - rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_6MBS, 59); - rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_9MBS, 53); - rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_12MBS, 49); - rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_18MBS, 46); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR7, reg); - - rt2x00pci_register_read(rt2x00dev, TXRX_CSR8, ®); - rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_24MBS, 44); - rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_36MBS, 42); - rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_48MBS, 42); - rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_54MBS, 42); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR8, reg); - - rt2x00pci_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f); - - rt2x00pci_register_write(rt2x00dev, MAC_CSR6, 0x00000fff); - - rt2x00pci_register_read(rt2x00dev, MAC_CSR9, ®); - rt2x00_set_field32(®, MAC_CSR9_CW_SELECT, 0); - rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg); - - rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x0000071c); - - if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) - return -EBUSY; - - rt2x00pci_register_write(rt2x00dev, MAC_CSR13, 0x0000e000); - - /* - * Invalidate all Shared Keys (SEC_CSR0), - * and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5) - */ - rt2x00pci_register_write(rt2x00dev, SEC_CSR0, 0x00000000); - rt2x00pci_register_write(rt2x00dev, SEC_CSR1, 0x00000000); - rt2x00pci_register_write(rt2x00dev, SEC_CSR5, 0x00000000); - - rt2x00pci_register_write(rt2x00dev, PHY_CSR1, 0x000023b0); - rt2x00pci_register_write(rt2x00dev, PHY_CSR5, 0x060a100c); - rt2x00pci_register_write(rt2x00dev, PHY_CSR6, 0x00080606); - rt2x00pci_register_write(rt2x00dev, PHY_CSR7, 0x00000a08); - - rt2x00pci_register_write(rt2x00dev, PCI_CFG_CSR, 0x28ca4404); - - rt2x00pci_register_write(rt2x00dev, TEST_MODE_CSR, 0x00000200); - - rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff); - - rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR0, ®); - rt2x00_set_field32(®, AC_TXOP_CSR0_AC0_TX_OP, 0); - rt2x00_set_field32(®, AC_TXOP_CSR0_AC1_TX_OP, 0); - rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR0, reg); - - rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR1, ®); - rt2x00_set_field32(®, AC_TXOP_CSR1_AC2_TX_OP, 192); - rt2x00_set_field32(®, AC_TXOP_CSR1_AC3_TX_OP, 48); - rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg); - - /* - * We must clear the error counters. - * These registers are cleared on read, - * so we may pass a useless variable to store the value. - */ - rt2x00pci_register_read(rt2x00dev, STA_CSR0, ®); - rt2x00pci_register_read(rt2x00dev, STA_CSR1, ®); - rt2x00pci_register_read(rt2x00dev, STA_CSR2, ®); - - /* - * Reset MAC and BBP registers. - */ - rt2x00pci_register_read(rt2x00dev, MAC_CSR1, ®); - rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 1); - rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 1); - rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); - - rt2x00pci_register_read(rt2x00dev, MAC_CSR1, ®); - rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 0); - rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 0); - rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); - - rt2x00pci_register_read(rt2x00dev, MAC_CSR1, ®); - rt2x00_set_field32(®, MAC_CSR1_HOST_READY, 1); - rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg); - - return 0; -} - -static int rt61pci_init_bbp(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u16 eeprom; - u8 reg_id; - u8 value; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt61pci_bbp_read(rt2x00dev, 0, &value); - if ((value != 0xff) && (value != 0x00)) - goto continue_csr_init; - NOTICE(rt2x00dev, "Waiting for BBP register.\n"); - udelay(REGISTER_BUSY_DELAY); - } - - ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); - return -EACCES; - -continue_csr_init: - rt61pci_bbp_write(rt2x00dev, 3, 0x00); - rt61pci_bbp_write(rt2x00dev, 15, 0x30); - rt61pci_bbp_write(rt2x00dev, 21, 0xc8); - rt61pci_bbp_write(rt2x00dev, 22, 0x38); - rt61pci_bbp_write(rt2x00dev, 23, 0x06); - rt61pci_bbp_write(rt2x00dev, 24, 0xfe); - rt61pci_bbp_write(rt2x00dev, 25, 0x0a); - rt61pci_bbp_write(rt2x00dev, 26, 0x0d); - rt61pci_bbp_write(rt2x00dev, 34, 0x12); - rt61pci_bbp_write(rt2x00dev, 37, 0x07); - rt61pci_bbp_write(rt2x00dev, 39, 0xf8); - rt61pci_bbp_write(rt2x00dev, 41, 0x60); - rt61pci_bbp_write(rt2x00dev, 53, 0x10); - rt61pci_bbp_write(rt2x00dev, 54, 0x18); - rt61pci_bbp_write(rt2x00dev, 60, 0x10); - rt61pci_bbp_write(rt2x00dev, 61, 0x04); - rt61pci_bbp_write(rt2x00dev, 62, 0x04); - rt61pci_bbp_write(rt2x00dev, 75, 0xfe); - rt61pci_bbp_write(rt2x00dev, 86, 0xfe); - rt61pci_bbp_write(rt2x00dev, 88, 0xfe); - rt61pci_bbp_write(rt2x00dev, 90, 0x0f); - rt61pci_bbp_write(rt2x00dev, 99, 0x00); - rt61pci_bbp_write(rt2x00dev, 102, 0x16); - rt61pci_bbp_write(rt2x00dev, 107, 0x04); - - DEBUG(rt2x00dev, "Start initialization from EEPROM...\n"); - for (i = 0; i < EEPROM_BBP_SIZE; i++) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); - - if (eeprom != 0xffff && eeprom != 0x0000) { - reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); - value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); - DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n", - reg_id, value); - rt61pci_bbp_write(rt2x00dev, reg_id, value); - } - } - DEBUG(rt2x00dev, "...End initialization from EEPROM.\n"); - - return 0; -} - -/* - * Device state switch handlers. - */ -static void rt61pci_toggle_rx(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - u32 reg; - - rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, - state == STATE_RADIO_RX_OFF); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); -} - -static void rt61pci_toggle_irq(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - int mask = (state == STATE_RADIO_IRQ_OFF); - u32 reg; - - /* - * When interrupts are being enabled, the interrupt registers - * should clear the register to assure a clean state. - */ - if (state == STATE_RADIO_IRQ_ON) { - rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®); - rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg); - - rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, ®); - rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg); - } - - /* - * Only toggle the interrupts bits we are going to use. - * Non-checked interrupt bits are disabled by default. - */ - rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, ®); - rt2x00_set_field32(®, INT_MASK_CSR_TXDONE, mask); - rt2x00_set_field32(®, INT_MASK_CSR_RXDONE, mask); - rt2x00_set_field32(®, INT_MASK_CSR_ENABLE_MITIGATION, mask); - rt2x00_set_field32(®, INT_MASK_CSR_MITIGATION_PERIOD, 0xff); - rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg); - - rt2x00pci_register_read(rt2x00dev, MCU_INT_MASK_CSR, ®); - rt2x00_set_field32(®, MCU_INT_MASK_CSR_0, mask); - rt2x00_set_field32(®, MCU_INT_MASK_CSR_1, mask); - rt2x00_set_field32(®, MCU_INT_MASK_CSR_2, mask); - rt2x00_set_field32(®, MCU_INT_MASK_CSR_3, mask); - rt2x00_set_field32(®, MCU_INT_MASK_CSR_4, mask); - rt2x00_set_field32(®, MCU_INT_MASK_CSR_5, mask); - rt2x00_set_field32(®, MCU_INT_MASK_CSR_6, mask); - rt2x00_set_field32(®, MCU_INT_MASK_CSR_7, mask); - rt2x00pci_register_write(rt2x00dev, MCU_INT_MASK_CSR, reg); -} - -static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - /* - * Initialize all registers. - */ - if (rt61pci_init_rings(rt2x00dev) || - rt61pci_init_registers(rt2x00dev) || - rt61pci_init_bbp(rt2x00dev)) { - ERROR(rt2x00dev, "Register initialization failed.\n"); - return -EIO; - } - - /* - * Enable interrupts. - */ - rt61pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON); - - /* - * Enable RX. - */ - rt2x00pci_register_read(rt2x00dev, RX_CNTL_CSR, ®); - rt2x00_set_field32(®, RX_CNTL_CSR_ENABLE_RX_DMA, 1); - rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg); - - /* - * Enable LED - */ - rt61pci_enable_led(rt2x00dev); - - return 0; -} - -static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - /* - * Disable LED - */ - rt61pci_disable_led(rt2x00dev); - - rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x00001818); - - /* - * Disable synchronisation. - */ - rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0); - - /* - * Cancel RX and TX. - */ - rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®); - rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC0, 1); - rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC1, 1); - rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC2, 1); - rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC3, 1); - rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_MGMT, 1); - rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg); - - /* - * Disable interrupts. - */ - rt61pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF); -} - -static int rt61pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) -{ - u32 reg; - unsigned int i; - char put_to_sleep; - char current_state; - - put_to_sleep = (state != STATE_AWAKE); - - rt2x00pci_register_read(rt2x00dev, MAC_CSR12, ®); - rt2x00_set_field32(®, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep); - rt2x00_set_field32(®, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep); - rt2x00pci_register_write(rt2x00dev, MAC_CSR12, reg); - - /* - * Device is not guaranteed to be in the requested state yet. - * We must wait until the register indicates that the - * device has entered the correct state. - */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00pci_register_read(rt2x00dev, MAC_CSR12, ®); - current_state = - rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE); - if (current_state == !put_to_sleep) - return 0; - msleep(10); - } - - NOTICE(rt2x00dev, "Device failed to enter state %d, " - "current device state %d.\n", !put_to_sleep, current_state); - - return -EBUSY; -} - -static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - int retval = 0; - - switch (state) { - case STATE_RADIO_ON: - retval = rt61pci_enable_radio(rt2x00dev); - break; - case STATE_RADIO_OFF: - rt61pci_disable_radio(rt2x00dev); - break; - case STATE_RADIO_RX_ON: - case STATE_RADIO_RX_OFF: - rt61pci_toggle_rx(rt2x00dev, state); - break; - case STATE_DEEP_SLEEP: - case STATE_SLEEP: - case STATE_STANDBY: - case STATE_AWAKE: - retval = rt61pci_set_state(rt2x00dev, state); - break; - default: - retval = -ENOTSUPP; - break; - } - - return retval; -} - -/* - * TX descriptor initialization - */ -static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct data_desc *txd, - struct txdata_entry_desc *desc, - struct ieee80211_hdr *ieee80211hdr, - unsigned int length, - struct ieee80211_tx_control *control) -{ - u32 word; - - /* - * Start writing the descriptor words. - */ - rt2x00_desc_read(txd, 1, &word); - rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, desc->queue); - rt2x00_set_field32(&word, TXD_W1_AIFSN, desc->aifs); - rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min); - rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max); - rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1); - rt2x00_desc_write(txd, 1, word); - - rt2x00_desc_read(txd, 2, &word); - rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal); - rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service); - rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low); - rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high); - rt2x00_desc_write(txd, 2, word); - - rt2x00_desc_read(txd, 5, &word); - rt2x00_set_field32(&word, TXD_W5_TX_POWER, - TXPOWER_TO_DEV(control->power_level)); - rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1); - rt2x00_desc_write(txd, 5, word); - - rt2x00_desc_read(txd, 11, &word); - rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, length); - rt2x00_desc_write(txd, 11, word); - - rt2x00_desc_read(txd, 0, &word); - rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1); - rt2x00_set_field32(&word, TXD_W0_VALID, 1); - rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, - test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags)); - rt2x00_set_field32(&word, TXD_W0_ACK, - !(control->flags & IEEE80211_TXCTL_NO_ACK)); - rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, - test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags)); - rt2x00_set_field32(&word, TXD_W0_OFDM, - test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags)); - rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs); - rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, - !!(control->flags & - IEEE80211_TXCTL_LONG_RETRY_LIMIT)); - rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0); - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, length); - rt2x00_set_field32(&word, TXD_W0_BURST, - test_bit(ENTRY_TXD_BURST, &desc->flags)); - rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); - rt2x00_desc_write(txd, 0, word); -} - -/* - * TX data initialization - */ -static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - unsigned int queue) -{ - u32 reg; - - if (queue == IEEE80211_TX_QUEUE_BEACON) { - /* - * For Wi-Fi faily generated beacons between participating - * stations. Set TBTT phase adaptive adjustment step to 8us. - */ - rt2x00pci_register_write(rt2x00dev, TXRX_CSR10, 0x00001008); - - rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); - if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) { - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); - } - return; - } - - rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®); - if (queue == IEEE80211_TX_QUEUE_DATA0) - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC0, 1); - else if (queue == IEEE80211_TX_QUEUE_DATA1) - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC1, 1); - else if (queue == IEEE80211_TX_QUEUE_DATA2) - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC2, 1); - else if (queue == IEEE80211_TX_QUEUE_DATA3) - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC3, 1); - else if (queue == IEEE80211_TX_QUEUE_DATA4) - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_MGMT, 1); - rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg); -} - -/* - * RX control handlers - */ -static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) -{ - u16 eeprom; - u8 offset; - u8 lna; - - lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA); - switch (lna) { - case 3: - offset = 90; - break; - case 2: - offset = 74; - break; - case 1: - offset = 64; - break; - default: - return 0; - } - - if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) { - if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) - offset += 14; - - if (lna == 3 || lna == 2) - offset += 10; - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); - offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1); - } else { - if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) - offset += 14; - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); - offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); - } - - return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset; -} - -static void rt61pci_fill_rxdone(struct data_entry *entry, - struct rxdata_entry_desc *desc) -{ - struct data_desc *rxd = entry->priv; - u32 word0; - u32 word1; - - rt2x00_desc_read(rxd, 0, &word0); - rt2x00_desc_read(rxd, 1, &word1); - - desc->flags = 0; - if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) - desc->flags |= RX_FLAG_FAILED_FCS_CRC; - - /* - * Obtain the status about this packet. - */ - desc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); - desc->rssi = rt61pci_agc_to_rssi(entry->ring->rt2x00dev, word1); - desc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); - desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); - - return; -} - -/* - * Interrupt functions. - */ -static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) -{ - struct data_ring *ring; - struct data_entry *entry; - struct data_entry *entry_done; - struct data_desc *txd; - u32 word; - u32 reg; - u32 old_reg; - int type; - int index; - int tx_status; - int retry; - - /* - * During each loop we will compare the freshly read - * STA_CSR4 register value with the value read from - * the previous loop. If the 2 values are equal then - * we should stop processing because the chance it - * quite big that the device has been unplugged and - * we risk going into an endless loop. - */ - old_reg = 0; - - while (1) { - rt2x00pci_register_read(rt2x00dev, STA_CSR4, ®); - if (!rt2x00_get_field32(reg, STA_CSR4_VALID)) - break; - - if (old_reg == reg) - break; - old_reg = reg; - - /* - * Skip this entry when it contains an invalid - * ring identication number. - */ - type = rt2x00_get_field32(reg, STA_CSR4_PID_TYPE); - ring = rt2x00lib_get_ring(rt2x00dev, type); - if (unlikely(!ring)) - continue; - - /* - * Skip this entry when it contains an invalid - * index number. - */ - index = rt2x00_get_field32(reg, STA_CSR4_PID_SUBTYPE); - if (unlikely(index >= ring->stats.limit)) - continue; - - entry = &ring->entry[index]; - txd = entry->priv; - rt2x00_desc_read(txd, 0, &word); - - if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || - !rt2x00_get_field32(word, TXD_W0_VALID)) - return; - - entry_done = rt2x00_get_data_entry_done(ring); - while (entry != entry_done) { - /* Catch up. Just report any entries we missed as - * failed. */ - WARNING(rt2x00dev, - "TX status report missed for entry %p\n", - entry_done); - rt2x00lib_txdone(entry_done, TX_FAIL_OTHER, 0); - entry_done = rt2x00_get_data_entry_done(ring); - } - - /* - * Obtain the status about this packet. - */ - tx_status = rt2x00_get_field32(reg, STA_CSR4_TX_RESULT); - retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT); - - rt2x00lib_txdone(entry, tx_status, retry); - - /* - * Make this entry available for reuse. - */ - entry->flags = 0; - rt2x00_set_field32(&word, TXD_W0_VALID, 0); - rt2x00_desc_write(txd, 0, word); - rt2x00_ring_index_done_inc(entry->ring); - - /* - * If the data ring was full before the txdone handler - * we must make sure the packet queue in the mac80211 stack - * is reenabled when the txdone handler has finished. - */ - if (!rt2x00_ring_full(ring)) - ieee80211_wake_queue(rt2x00dev->hw, - entry->tx_status.control.queue); - } -} - -static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance) -{ - struct rt2x00_dev *rt2x00dev = dev_instance; - u32 reg_mcu; - u32 reg; - - /* - * Get the interrupt sources & saved to local variable. - * Write register value back to clear pending interrupts. - */ - rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, ®_mcu); - rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg_mcu); - - rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, ®); - rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg); - - if (!reg && !reg_mcu) - return IRQ_NONE; - - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) - return IRQ_HANDLED; - - /* - * Handle interrupts, walk through all bits - * and run the tasks, the bits are checked in order of - * priority. - */ - - /* - * 1 - Rx ring done interrupt. - */ - if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RXDONE)) - rt2x00pci_rxdone(rt2x00dev); - - /* - * 2 - Tx ring done interrupt. - */ - if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TXDONE)) - rt61pci_txdone(rt2x00dev); - - /* - * 3 - Handle MCU command done. - */ - if (reg_mcu) - rt2x00pci_register_write(rt2x00dev, - M2H_CMD_DONE_CSR, 0xffffffff); - - return IRQ_HANDLED; -} - -/* - * Device probe functions. - */ -static int rt61pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) -{ - struct eeprom_93cx6 eeprom; - u32 reg; - u16 word; - u8 *mac; - s8 value; - - rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, ®); - - eeprom.data = rt2x00dev; - eeprom.register_read = rt61pci_eepromregister_read; - eeprom.register_write = rt61pci_eepromregister_write; - eeprom.width = rt2x00_get_field32(reg, E2PROM_CSR_TYPE_93C46) ? - PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66; - eeprom.reg_data_in = 0; - eeprom.reg_data_out = 0; - eeprom.reg_data_clock = 0; - eeprom.reg_chip_select = 0; - - eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, - EEPROM_SIZE / sizeof(u16)); - - /* - * Start validation of the data that has been read. - */ - mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); - if (!is_valid_ether_addr(mac)) { - DECLARE_MAC_BUF(macbuf); - - random_ether_addr(mac); - EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac)); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2); - rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, 2); - rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, 2); - rt2x00_set_field16(&word, EEPROM_ANTENNA_FRAME_TYPE, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF5225); - rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); - EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_NIC_ENABLE_DIVERSITY, 0); - rt2x00_set_field16(&word, EEPROM_NIC_TX_DIVERSITY, 0); - rt2x00_set_field16(&word, EEPROM_NIC_TX_RX_FIXED, 0); - rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); - rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); - EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_LED_LED_MODE, - LED_MODE_DEFAULT); - rt2x00_eeprom_write(rt2x00dev, EEPROM_LED, word); - EEPROM(rt2x00dev, "Led: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0); - rt2x00_set_field16(&word, EEPROM_FREQ_SEQ, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word); - EEPROM(rt2x00dev, "Freq: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0); - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word); - EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word); - } else { - value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_1); - if (value < -10 || value > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0); - value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_2); - if (value < -10 || value > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0); - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word); - EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word); - } else { - value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1); - if (value < -10 || value > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0); - value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_2); - if (value < -10 || value > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word); - } - - return 0; -} - -static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - u16 value; - u16 eeprom; - u16 device; - - /* - * Read EEPROM word for configuration. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); - - /* - * Identify RF chipset. - * To determine the RT chip we have to read the - * PCI header of the device. - */ - pci_read_config_word(rt2x00dev_pci(rt2x00dev), - PCI_CONFIG_HEADER_DEVICE, &device); - value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); - rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®); - rt2x00_set_chip(rt2x00dev, device, value, reg); - - if (!rt2x00_rf(&rt2x00dev->chip, RF5225) && - !rt2x00_rf(&rt2x00dev->chip, RF5325) && - !rt2x00_rf(&rt2x00dev->chip, RF2527) && - !rt2x00_rf(&rt2x00dev->chip, RF2529)) { - ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); - return -ENODEV; - } - - /* - * Identify default antenna configuration. - */ - rt2x00dev->hw->conf.antenna_sel_tx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT); - rt2x00dev->hw->conf.antenna_sel_rx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT); - - /* - * Read the Frame type. - */ - if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE)) - __set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags); - - /* - * Determine number of antenna's. - */ - if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_NUM) == 2) - __set_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags); - - /* - * Detect if this device has an hardware controlled radio. - */ -#ifdef CONFIG_RT61PCI_RFKILL - if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) - __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags); -#endif /* CONFIG_RT61PCI_RFKILL */ - - /* - * Read frequency offset and RF programming sequence. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom); - if (rt2x00_get_field16(eeprom, EEPROM_FREQ_SEQ)) - __set_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags); - - rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET); - - /* - * Read external LNA informations. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); - - if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A)) - __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); - if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG)) - __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); - - /* - * Store led settings, for correct led behaviour. - * If the eeprom value is invalid, - * switch to default led mode. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom); - - rt2x00dev->led_mode = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE); - - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LED_MODE, - rt2x00dev->led_mode); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_0, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_GPIO_0)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_1, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_GPIO_1)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_2, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_GPIO_2)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_3, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_GPIO_3)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_4, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_GPIO_4)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_ACT, - rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_BG, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_RDY_G)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_A, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_RDY_A)); - - return 0; -} - -/* - * RF value list for RF5225 & RF5325 - * Supports: 2.4 GHz & 5.2 GHz, rf_sequence disabled - */ -static const struct rf_channel rf_vals_noseq[] = { - { 1, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b }, - { 2, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f }, - { 3, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b }, - { 4, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f }, - { 5, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b }, - { 6, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f }, - { 7, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b }, - { 8, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f }, - { 9, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b }, - { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f }, - { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b }, - { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f }, - { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b }, - { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 }, - - /* 802.11 UNI / HyperLan 2 */ - { 36, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa23 }, - { 40, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa03 }, - { 44, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa0b }, - { 48, 0x00002ccc, 0x000049aa, 0x0009be55, 0x000ffa13 }, - { 52, 0x00002ccc, 0x000049ae, 0x0009ae55, 0x000ffa1b }, - { 56, 0x00002ccc, 0x000049b2, 0x0009ae55, 0x000ffa23 }, - { 60, 0x00002ccc, 0x000049ba, 0x0009ae55, 0x000ffa03 }, - { 64, 0x00002ccc, 0x000049be, 0x0009ae55, 0x000ffa0b }, - - /* 802.11 HyperLan 2 */ - { 100, 0x00002ccc, 0x00004a2a, 0x000bae55, 0x000ffa03 }, - { 104, 0x00002ccc, 0x00004a2e, 0x000bae55, 0x000ffa0b }, - { 108, 0x00002ccc, 0x00004a32, 0x000bae55, 0x000ffa13 }, - { 112, 0x00002ccc, 0x00004a36, 0x000bae55, 0x000ffa1b }, - { 116, 0x00002ccc, 0x00004a3a, 0x000bbe55, 0x000ffa23 }, - { 120, 0x00002ccc, 0x00004a82, 0x000bbe55, 0x000ffa03 }, - { 124, 0x00002ccc, 0x00004a86, 0x000bbe55, 0x000ffa0b }, - { 128, 0x00002ccc, 0x00004a8a, 0x000bbe55, 0x000ffa13 }, - { 132, 0x00002ccc, 0x00004a8e, 0x000bbe55, 0x000ffa1b }, - { 136, 0x00002ccc, 0x00004a92, 0x000bbe55, 0x000ffa23 }, - - /* 802.11 UNII */ - { 140, 0x00002ccc, 0x00004a9a, 0x000bbe55, 0x000ffa03 }, - { 149, 0x00002ccc, 0x00004aa2, 0x000bbe55, 0x000ffa1f }, - { 153, 0x00002ccc, 0x00004aa6, 0x000bbe55, 0x000ffa27 }, - { 157, 0x00002ccc, 0x00004aae, 0x000bbe55, 0x000ffa07 }, - { 161, 0x00002ccc, 0x00004ab2, 0x000bbe55, 0x000ffa0f }, - { 165, 0x00002ccc, 0x00004ab6, 0x000bbe55, 0x000ffa17 }, - - /* MMAC(Japan)J52 ch 34,38,42,46 */ - { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa0b }, - { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000ffa13 }, - { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa1b }, - { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa23 }, -}; - -/* - * RF value list for RF5225 & RF5325 - * Supports: 2.4 GHz & 5.2 GHz, rf_sequence enabled - */ -static const struct rf_channel rf_vals_seq[] = { - { 1, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b }, - { 2, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f }, - { 3, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b }, - { 4, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f }, - { 5, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b }, - { 6, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f }, - { 7, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b }, - { 8, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f }, - { 9, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b }, - { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f }, - { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b }, - { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f }, - { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b }, - { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 }, - - /* 802.11 UNI / HyperLan 2 */ - { 36, 0x00002cd4, 0x0004481a, 0x00098455, 0x000c0a03 }, - { 40, 0x00002cd0, 0x00044682, 0x00098455, 0x000c0a03 }, - { 44, 0x00002cd0, 0x00044686, 0x00098455, 0x000c0a1b }, - { 48, 0x00002cd0, 0x0004468e, 0x00098655, 0x000c0a0b }, - { 52, 0x00002cd0, 0x00044692, 0x00098855, 0x000c0a23 }, - { 56, 0x00002cd0, 0x0004469a, 0x00098c55, 0x000c0a13 }, - { 60, 0x00002cd0, 0x000446a2, 0x00098e55, 0x000c0a03 }, - { 64, 0x00002cd0, 0x000446a6, 0x00099255, 0x000c0a1b }, - - /* 802.11 HyperLan 2 */ - { 100, 0x00002cd4, 0x0004489a, 0x000b9855, 0x000c0a03 }, - { 104, 0x00002cd4, 0x000448a2, 0x000b9855, 0x000c0a03 }, - { 108, 0x00002cd4, 0x000448aa, 0x000b9855, 0x000c0a03 }, - { 112, 0x00002cd4, 0x000448b2, 0x000b9a55, 0x000c0a03 }, - { 116, 0x00002cd4, 0x000448ba, 0x000b9a55, 0x000c0a03 }, - { 120, 0x00002cd0, 0x00044702, 0x000b9a55, 0x000c0a03 }, - { 124, 0x00002cd0, 0x00044706, 0x000b9a55, 0x000c0a1b }, - { 128, 0x00002cd0, 0x0004470e, 0x000b9c55, 0x000c0a0b }, - { 132, 0x00002cd0, 0x00044712, 0x000b9c55, 0x000c0a23 }, - { 136, 0x00002cd0, 0x0004471a, 0x000b9e55, 0x000c0a13 }, - - /* 802.11 UNII */ - { 140, 0x00002cd0, 0x00044722, 0x000b9e55, 0x000c0a03 }, - { 149, 0x00002cd0, 0x0004472e, 0x000ba255, 0x000c0a1b }, - { 153, 0x00002cd0, 0x00044736, 0x000ba255, 0x000c0a0b }, - { 157, 0x00002cd4, 0x0004490a, 0x000ba255, 0x000c0a17 }, - { 161, 0x00002cd4, 0x00044912, 0x000ba255, 0x000c0a17 }, - { 165, 0x00002cd4, 0x0004491a, 0x000ba255, 0x000c0a17 }, - - /* MMAC(Japan)J52 ch 34,38,42,46 */ - { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000c0a0b }, - { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000c0a13 }, - { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000c0a1b }, - { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000c0a23 }, -}; - -static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) -{ - struct hw_mode_spec *spec = &rt2x00dev->spec; - u8 *txpower; - unsigned int i; - - /* - * Initialize all hw fields. - */ - rt2x00dev->hw->flags = - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | - IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING; - rt2x00dev->hw->extra_tx_headroom = 0; - rt2x00dev->hw->max_signal = MAX_SIGNAL; - rt2x00dev->hw->max_rssi = MAX_RX_SSI; - rt2x00dev->hw->queues = 5; - - SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev); - SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, - rt2x00_eeprom_addr(rt2x00dev, - EEPROM_MAC_ADDR_0)); - - /* - * Convert tx_power array in eeprom. - */ - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START); - for (i = 0; i < 14; i++) - txpower[i] = TXPOWER_FROM_DEV(txpower[i]); - - /* - * Initialize hw_mode information. - */ - spec->num_modes = 2; - spec->num_rates = 12; - spec->tx_power_a = NULL; - spec->tx_power_bg = txpower; - spec->tx_power_default = DEFAULT_TXPOWER; - - if (!test_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags)) { - spec->num_channels = 14; - spec->channels = rf_vals_noseq; - } else { - spec->num_channels = 14; - spec->channels = rf_vals_seq; - } - - if (rt2x00_rf(&rt2x00dev->chip, RF5225) || - rt2x00_rf(&rt2x00dev->chip, RF5325)) { - spec->num_modes = 3; - spec->num_channels = ARRAY_SIZE(rf_vals_seq); - - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); - for (i = 0; i < 14; i++) - txpower[i] = TXPOWER_FROM_DEV(txpower[i]); - - spec->tx_power_a = txpower; - } -} - -static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) -{ - int retval; - - /* - * Allocate eeprom data. - */ - retval = rt61pci_validate_eeprom(rt2x00dev); - if (retval) - return retval; - - retval = rt61pci_init_eeprom(rt2x00dev); - if (retval) - return retval; - - /* - * Initialize hw specifications. - */ - rt61pci_probe_hw_mode(rt2x00dev); - - /* - * This device requires firmware - */ - __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); - - /* - * Set the rssi offset. - */ - rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; - - return 0; -} - -/* - * IEEE80211 stack callback functions. - */ -static void rt61pci_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - int mc_count, - struct dev_addr_list *mc_list) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct interface *intf = &rt2x00dev->interface; - u32 reg; - - /* - * Mask off any flags we are going to ignore from - * the total_flags field. - */ - *total_flags &= - FIF_ALLMULTI | - FIF_FCSFAIL | - FIF_PLCPFAIL | - FIF_CONTROL | - FIF_OTHER_BSS | - FIF_PROMISC_IN_BSS; - - /* - * Apply some rules to the filters: - * - Some filters imply different filters to be set. - * - Some things we can't filter out at all. - * - Some filters are set based on interface type. - */ - if (mc_count) - *total_flags |= FIF_ALLMULTI; - if (*total_flags & FIF_OTHER_BSS || - *total_flags & FIF_PROMISC_IN_BSS) - *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS; - if (is_interface_type(intf, IEEE80211_IF_TYPE_AP)) - *total_flags |= FIF_PROMISC_IN_BSS; - - /* - * Check if there is any work left for us. - */ - if (intf->filter == *total_flags) - return; - intf->filter = *total_flags; - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * and broadcast frames will always be accepted since - * there is no filter for it at this time. - */ - rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, - !(*total_flags & FIF_FCSFAIL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, - !(*total_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, - !(*total_flags & FIF_CONTROL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1); - rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, - !(*total_flags & FIF_ALLMULTI)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_BORADCAST, 0); - rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, 1); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); -} - -static int rt61pci_set_retry_limit(struct ieee80211_hw *hw, - u32 short_retry, u32 long_retry) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - - rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, ®); - rt2x00_set_field32(®, TXRX_CSR4_LONG_RETRY_LIMIT, long_retry); - rt2x00_set_field32(®, TXRX_CSR4_SHORT_RETRY_LIMIT, short_retry); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg); - - return 0; -} - -static u64 rt61pci_get_tsf(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u64 tsf; - u32 reg; - - rt2x00pci_register_read(rt2x00dev, TXRX_CSR13, ®); - tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32; - rt2x00pci_register_read(rt2x00dev, TXRX_CSR12, ®); - tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER); - - return tsf; -} - -static void rt61pci_reset_tsf(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - - rt2x00pci_register_write(rt2x00dev, TXRX_CSR12, 0); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR13, 0); -} - -static int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *control) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - - /* - * Just in case the ieee80211 doesn't set this, - * but we need this queue set for the descriptor - * initialization. - */ - control->queue = IEEE80211_TX_QUEUE_BEACON; - - /* - * We need to append the descriptor in front of the - * beacon frame. - */ - if (skb_headroom(skb) < TXD_DESC_SIZE) { - if (pskb_expand_head(skb, TXD_DESC_SIZE, 0, GFP_ATOMIC)) { - dev_kfree_skb(skb); - return -ENOMEM; - } - } - - /* - * First we create the beacon. - */ - skb_push(skb, TXD_DESC_SIZE); - memset(skb->data, 0, TXD_DESC_SIZE); - - rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data, - (struct ieee80211_hdr *)(skb->data + - TXD_DESC_SIZE), - skb->len - TXD_DESC_SIZE, control); - - /* - * Write entire beacon with descriptor to register, - * and kick the beacon generator. - */ - rt2x00pci_register_multiwrite(rt2x00dev, HW_BEACON_BASE0, - skb->data, skb->len); - rt61pci_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); - - return 0; -} - -static const struct ieee80211_ops rt61pci_mac80211_ops = { - .tx = rt2x00mac_tx, - .start = rt2x00mac_start, - .stop = rt2x00mac_stop, - .add_interface = rt2x00mac_add_interface, - .remove_interface = rt2x00mac_remove_interface, - .config = rt2x00mac_config, - .config_interface = rt2x00mac_config_interface, - .configure_filter = rt61pci_configure_filter, - .get_stats = rt2x00mac_get_stats, - .set_retry_limit = rt61pci_set_retry_limit, - .erp_ie_changed = rt2x00mac_erp_ie_changed, - .conf_tx = rt2x00mac_conf_tx, - .get_tx_stats = rt2x00mac_get_tx_stats, - .get_tsf = rt61pci_get_tsf, - .reset_tsf = rt61pci_reset_tsf, - .beacon_update = rt61pci_beacon_update, -}; - -static const struct rt2x00lib_ops rt61pci_rt2x00_ops = { - .irq_handler = rt61pci_interrupt, - .probe_hw = rt61pci_probe_hw, - .get_firmware_name = rt61pci_get_firmware_name, - .load_firmware = rt61pci_load_firmware, - .initialize = rt2x00pci_initialize, - .uninitialize = rt2x00pci_uninitialize, - .set_device_state = rt61pci_set_device_state, - .rfkill_poll = rt61pci_rfkill_poll, - .link_stats = rt61pci_link_stats, - .reset_tuner = rt61pci_reset_tuner, - .link_tuner = rt61pci_link_tuner, - .write_tx_desc = rt61pci_write_tx_desc, - .write_tx_data = rt2x00pci_write_tx_data, - .kick_tx_queue = rt61pci_kick_tx_queue, - .fill_rxdone = rt61pci_fill_rxdone, - .config_mac_addr = rt61pci_config_mac_addr, - .config_bssid = rt61pci_config_bssid, - .config_type = rt61pci_config_type, - .config_preamble = rt61pci_config_preamble, - .config = rt61pci_config, -}; - -static const struct rt2x00_ops rt61pci_ops = { - .name = DRV_NAME, - .rxd_size = RXD_DESC_SIZE, - .txd_size = TXD_DESC_SIZE, - .eeprom_size = EEPROM_SIZE, - .rf_size = RF_SIZE, - .lib = &rt61pci_rt2x00_ops, - .hw = &rt61pci_mac80211_ops, -#ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt61pci_rt2x00debug, -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -}; - -/* - * RT61pci module information. - */ -static struct pci_device_id rt61pci_device_table[] = { - /* RT2561s */ - { PCI_DEVICE(0x1814, 0x0301), PCI_DEVICE_DATA(&rt61pci_ops) }, - /* RT2561 v2 */ - { PCI_DEVICE(0x1814, 0x0302), PCI_DEVICE_DATA(&rt61pci_ops) }, - /* RT2661 */ - { PCI_DEVICE(0x1814, 0x0401), PCI_DEVICE_DATA(&rt61pci_ops) }, - { 0, } -}; - -MODULE_AUTHOR(DRV_PROJECT); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("Ralink RT61 PCI & PCMCIA Wireless LAN driver."); -MODULE_SUPPORTED_DEVICE("Ralink RT2561, RT2561s & RT2661 " - "PCI & PCMCIA chipset based cards"); -MODULE_DEVICE_TABLE(pci, rt61pci_device_table); -MODULE_FIRMWARE(FIRMWARE_RT2561); -MODULE_FIRMWARE(FIRMWARE_RT2561s); -MODULE_FIRMWARE(FIRMWARE_RT2661); -MODULE_LICENSE("GPL"); - -static struct pci_driver rt61pci_driver = { - .name = DRV_NAME, - .id_table = rt61pci_device_table, - .probe = rt2x00pci_probe, - .remove = __devexit_p(rt2x00pci_remove), - .suspend = rt2x00pci_suspend, - .resume = rt2x00pci_resume, -}; - -static int __init rt61pci_init(void) -{ - return pci_register_driver(&rt61pci_driver); -} - -static void __exit rt61pci_exit(void) -{ - pci_unregister_driver(&rt61pci_driver); -} - -module_init(rt61pci_init); -module_exit(rt61pci_exit); diff --git a/package/rt2x00/src/rt61pci.h b/package/rt2x00/src/rt61pci.h deleted file mode 100644 index 6721d7dd32b..00000000000 --- a/package/rt2x00/src/rt61pci.h +++ /dev/null @@ -1,1457 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt61pci - Abstract: Data structures and registers for the rt61pci module. - Supported chipsets: RT2561, RT2561s, RT2661. - */ - -#ifndef RT61PCI_H -#define RT61PCI_H - -/* - * RF chip defines. - */ -#define RF5225 0x0001 -#define RF5325 0x0002 -#define RF2527 0x0003 -#define RF2529 0x0004 - -/* - * Signal information. - * Defaul offset is required for RSSI <-> dBm conversion. - */ -#define MAX_SIGNAL 100 -#define MAX_RX_SSI -1 -#define DEFAULT_RSSI_OFFSET 120 - -/* - * Register layout information. - */ -#define CSR_REG_BASE 0x3000 -#define CSR_REG_SIZE 0x04b0 -#define EEPROM_BASE 0x0000 -#define EEPROM_SIZE 0x0100 -#define BBP_SIZE 0x0080 -#define RF_SIZE 0x0014 - -/* - * PCI registers. - */ - -/* - * PCI Configuration Header - */ -#define PCI_CONFIG_HEADER_VENDOR 0x0000 -#define PCI_CONFIG_HEADER_DEVICE 0x0002 - -/* - * HOST_CMD_CSR: For HOST to interrupt embedded processor - */ -#define HOST_CMD_CSR 0x0008 -#define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x0000007f) -#define HOST_CMD_CSR_INTERRUPT_MCU FIELD32(0x00000080) - -/* - * MCU_CNTL_CSR - * SELECT_BANK: Select 8051 program bank. - * RESET: Enable 8051 reset state. - * READY: Ready state for 8051. - */ -#define MCU_CNTL_CSR 0x000c -#define MCU_CNTL_CSR_SELECT_BANK FIELD32(0x00000001) -#define MCU_CNTL_CSR_RESET FIELD32(0x00000002) -#define MCU_CNTL_CSR_READY FIELD32(0x00000004) - -/* - * SOFT_RESET_CSR - */ -#define SOFT_RESET_CSR 0x0010 - -/* - * MCU_INT_SOURCE_CSR: MCU interrupt source/mask register. - */ -#define MCU_INT_SOURCE_CSR 0x0014 -#define MCU_INT_SOURCE_CSR_0 FIELD32(0x00000001) -#define MCU_INT_SOURCE_CSR_1 FIELD32(0x00000002) -#define MCU_INT_SOURCE_CSR_2 FIELD32(0x00000004) -#define MCU_INT_SOURCE_CSR_3 FIELD32(0x00000008) -#define MCU_INT_SOURCE_CSR_4 FIELD32(0x00000010) -#define MCU_INT_SOURCE_CSR_5 FIELD32(0x00000020) -#define MCU_INT_SOURCE_CSR_6 FIELD32(0x00000040) -#define MCU_INT_SOURCE_CSR_7 FIELD32(0x00000080) -#define MCU_INT_SOURCE_CSR_TWAKEUP FIELD32(0x00000100) -#define MCU_INT_SOURCE_CSR_TBTT_EXPIRE FIELD32(0x00000200) - -/* - * MCU_INT_MASK_CSR: MCU interrupt source/mask register. - */ -#define MCU_INT_MASK_CSR 0x0018 -#define MCU_INT_MASK_CSR_0 FIELD32(0x00000001) -#define MCU_INT_MASK_CSR_1 FIELD32(0x00000002) -#define MCU_INT_MASK_CSR_2 FIELD32(0x00000004) -#define MCU_INT_MASK_CSR_3 FIELD32(0x00000008) -#define MCU_INT_MASK_CSR_4 FIELD32(0x00000010) -#define MCU_INT_MASK_CSR_5 FIELD32(0x00000020) -#define MCU_INT_MASK_CSR_6 FIELD32(0x00000040) -#define MCU_INT_MASK_CSR_7 FIELD32(0x00000080) -#define MCU_INT_MASK_CSR_TWAKEUP FIELD32(0x00000100) -#define MCU_INT_MASK_CSR_TBTT_EXPIRE FIELD32(0x00000200) - -/* - * PCI_USEC_CSR - */ -#define PCI_USEC_CSR 0x001c - -/* - * Security key table memory. - * 16 entries 32-byte for shared key table - * 64 entries 32-byte for pairwise key table - * 64 entries 8-byte for pairwise ta key table - */ -#define SHARED_KEY_TABLE_BASE 0x1000 -#define PAIRWISE_KEY_TABLE_BASE 0x1200 -#define PAIRWISE_TA_TABLE_BASE 0x1a00 - -struct hw_key_entry { - u8 key[16]; - u8 tx_mic[8]; - u8 rx_mic[8]; -} __attribute__ ((packed)); - -struct hw_pairwise_ta_entry { - u8 address[6]; - u8 reserved[2]; -} __attribute__ ((packed)); - -/* - * Other on-chip shared memory space. - */ -#define HW_CIS_BASE 0x2000 -#define HW_NULL_BASE 0x2b00 - -/* - * Since NULL frame won't be that long (256 byte), - * We steal 16 tail bytes to save debugging settings. - */ -#define HW_DEBUG_SETTING_BASE 0x2bf0 - -/* - * On-chip BEACON frame space. - */ -#define HW_BEACON_BASE0 0x2c00 -#define HW_BEACON_BASE1 0x2d00 -#define HW_BEACON_BASE2 0x2e00 -#define HW_BEACON_BASE3 0x2f00 -#define HW_BEACON_OFFSET 0x0100 - -/* - * HOST-MCU shared memory. - */ - -/* - * H2M_MAILBOX_CSR: Host-to-MCU Mailbox. - */ -#define H2M_MAILBOX_CSR 0x2100 -#define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff) -#define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00) -#define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000) -#define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000) - -/* - * MCU_LEDCS: LED control for MCU Mailbox. - */ -#define MCU_LEDCS_LED_MODE FIELD16(0x001f) -#define MCU_LEDCS_RADIO_STATUS FIELD16(0x0020) -#define MCU_LEDCS_LINK_BG_STATUS FIELD16(0x0040) -#define MCU_LEDCS_LINK_A_STATUS FIELD16(0x0080) -#define MCU_LEDCS_POLARITY_GPIO_0 FIELD16(0x0100) -#define MCU_LEDCS_POLARITY_GPIO_1 FIELD16(0x0200) -#define MCU_LEDCS_POLARITY_GPIO_2 FIELD16(0x0400) -#define MCU_LEDCS_POLARITY_GPIO_3 FIELD16(0x0800) -#define MCU_LEDCS_POLARITY_GPIO_4 FIELD16(0x1000) -#define MCU_LEDCS_POLARITY_ACT FIELD16(0x2000) -#define MCU_LEDCS_POLARITY_READY_BG FIELD16(0x4000) -#define MCU_LEDCS_POLARITY_READY_A FIELD16(0x8000) - -/* - * M2H_CMD_DONE_CSR. - */ -#define M2H_CMD_DONE_CSR 0x2104 - -/* - * MCU_TXOP_ARRAY_BASE. - */ -#define MCU_TXOP_ARRAY_BASE 0x2110 - -/* - * MAC Control/Status Registers(CSR). - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * MAC_CSR0: ASIC revision number. - */ -#define MAC_CSR0 0x3000 - -/* - * MAC_CSR1: System control register. - * SOFT_RESET: Software reset bit, 1: reset, 0: normal. - * BBP_RESET: Hardware reset BBP. - * HOST_READY: Host is ready after initialization, 1: ready. - */ -#define MAC_CSR1 0x3004 -#define MAC_CSR1_SOFT_RESET FIELD32(0x00000001) -#define MAC_CSR1_BBP_RESET FIELD32(0x00000002) -#define MAC_CSR1_HOST_READY FIELD32(0x00000004) - -/* - * MAC_CSR2: STA MAC register 0. - */ -#define MAC_CSR2 0x3008 -#define MAC_CSR2_BYTE0 FIELD32(0x000000ff) -#define MAC_CSR2_BYTE1 FIELD32(0x0000ff00) -#define MAC_CSR2_BYTE2 FIELD32(0x00ff0000) -#define MAC_CSR2_BYTE3 FIELD32(0xff000000) - -/* - * MAC_CSR3: STA MAC register 1. - */ -#define MAC_CSR3 0x300c -#define MAC_CSR3_BYTE4 FIELD32(0x000000ff) -#define MAC_CSR3_BYTE5 FIELD32(0x0000ff00) -#define MAC_CSR3_UNICAST_TO_ME_MASK FIELD32(0x00ff0000) - -/* - * MAC_CSR4: BSSID register 0. - */ -#define MAC_CSR4 0x3010 -#define MAC_CSR4_BYTE0 FIELD32(0x000000ff) -#define MAC_CSR4_BYTE1 FIELD32(0x0000ff00) -#define MAC_CSR4_BYTE2 FIELD32(0x00ff0000) -#define MAC_CSR4_BYTE3 FIELD32(0xff000000) - -/* - * MAC_CSR5: BSSID register 1. - * BSS_ID_MASK: 3: one BSSID, 0: 4 BSSID, 2 or 1: 2 BSSID. - */ -#define MAC_CSR5 0x3014 -#define MAC_CSR5_BYTE4 FIELD32(0x000000ff) -#define MAC_CSR5_BYTE5 FIELD32(0x0000ff00) -#define MAC_CSR5_BSS_ID_MASK FIELD32(0x00ff0000) - -/* - * MAC_CSR6: Maximum frame length register. - */ -#define MAC_CSR6 0x3018 -#define MAC_CSR6_MAX_FRAME_UNIT FIELD32(0x00000fff) - -/* - * MAC_CSR7: Reserved - */ -#define MAC_CSR7 0x301c - -/* - * MAC_CSR8: SIFS/EIFS register. - * All units are in US. - */ -#define MAC_CSR8 0x3020 -#define MAC_CSR8_SIFS FIELD32(0x000000ff) -#define MAC_CSR8_SIFS_AFTER_RX_OFDM FIELD32(0x0000ff00) -#define MAC_CSR8_EIFS FIELD32(0xffff0000) - -/* - * MAC_CSR9: Back-Off control register. - * SLOT_TIME: Slot time, default is 20us for 802.11BG. - * CWMIN: Bit for Cwmin. default Cwmin is 31 (2^5 - 1). - * CWMAX: Bit for Cwmax, default Cwmax is 1023 (2^10 - 1). - * CW_SELECT: 1: CWmin/Cwmax select from register, 0:select from TxD. - */ -#define MAC_CSR9 0x3024 -#define MAC_CSR9_SLOT_TIME FIELD32(0x000000ff) -#define MAC_CSR9_CWMIN FIELD32(0x00000f00) -#define MAC_CSR9_CWMAX FIELD32(0x0000f000) -#define MAC_CSR9_CW_SELECT FIELD32(0x00010000) - -/* - * MAC_CSR10: Power state configuration. - */ -#define MAC_CSR10 0x3028 - -/* - * MAC_CSR11: Power saving transition time register. - * DELAY_AFTER_TBCN: Delay after Tbcn expired in units of TU. - * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup. - * WAKEUP_LATENCY: In unit of TU. - */ -#define MAC_CSR11 0x302c -#define MAC_CSR11_DELAY_AFTER_TBCN FIELD32(0x000000ff) -#define MAC_CSR11_TBCN_BEFORE_WAKEUP FIELD32(0x00007f00) -#define MAC_CSR11_AUTOWAKE FIELD32(0x00008000) -#define MAC_CSR11_WAKEUP_LATENCY FIELD32(0x000f0000) - -/* - * MAC_CSR12: Manual power control / status register (merge CSR20 & PWRCSR1). - * CURRENT_STATE: 0:sleep, 1:awake. - * FORCE_WAKEUP: This has higher priority than PUT_TO_SLEEP. - * BBP_CURRENT_STATE: 0: BBP sleep, 1: BBP awake. - */ -#define MAC_CSR12 0x3030 -#define MAC_CSR12_CURRENT_STATE FIELD32(0x00000001) -#define MAC_CSR12_PUT_TO_SLEEP FIELD32(0x00000002) -#define MAC_CSR12_FORCE_WAKEUP FIELD32(0x00000004) -#define MAC_CSR12_BBP_CURRENT_STATE FIELD32(0x00000008) - -/* - * MAC_CSR13: GPIO. - */ -#define MAC_CSR13 0x3034 -#define MAC_CSR13_BIT0 FIELD32(0x00000001) -#define MAC_CSR13_BIT1 FIELD32(0x00000002) -#define MAC_CSR13_BIT2 FIELD32(0x00000004) -#define MAC_CSR13_BIT3 FIELD32(0x00000008) -#define MAC_CSR13_BIT4 FIELD32(0x00000010) -#define MAC_CSR13_BIT5 FIELD32(0x00000020) -#define MAC_CSR13_BIT6 FIELD32(0x00000040) -#define MAC_CSR13_BIT7 FIELD32(0x00000080) -#define MAC_CSR13_BIT8 FIELD32(0x00000100) -#define MAC_CSR13_BIT9 FIELD32(0x00000200) -#define MAC_CSR13_BIT10 FIELD32(0x00000400) -#define MAC_CSR13_BIT11 FIELD32(0x00000800) -#define MAC_CSR13_BIT12 FIELD32(0x00001000) - -/* - * MAC_CSR14: LED control register. - * ON_PERIOD: On period, default 70ms. - * OFF_PERIOD: Off period, default 30ms. - * HW_LED: HW TX activity, 1: normal OFF, 0: normal ON. - * SW_LED: s/w LED, 1: ON, 0: OFF. - * HW_LED_POLARITY: 0: active low, 1: active high. - */ -#define MAC_CSR14 0x3038 -#define MAC_CSR14_ON_PERIOD FIELD32(0x000000ff) -#define MAC_CSR14_OFF_PERIOD FIELD32(0x0000ff00) -#define MAC_CSR14_HW_LED FIELD32(0x00010000) -#define MAC_CSR14_SW_LED FIELD32(0x00020000) -#define MAC_CSR14_HW_LED_POLARITY FIELD32(0x00040000) -#define MAC_CSR14_SW_LED2 FIELD32(0x00080000) - -/* - * MAC_CSR15: NAV control. - */ -#define MAC_CSR15 0x303c - -/* - * TXRX control registers. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * TXRX_CSR0: TX/RX configuration register. - * TSF_OFFSET: Default is 24. - * AUTO_TX_SEQ: 1: ASIC auto replace sequence nr in outgoing frame. - * DISABLE_RX: Disable Rx engine. - * DROP_CRC: Drop CRC error. - * DROP_PHYSICAL: Drop physical error. - * DROP_CONTROL: Drop control frame. - * DROP_NOT_TO_ME: Drop not to me unicast frame. - * DROP_TO_DS: Drop fram ToDs bit is true. - * DROP_VERSION_ERROR: Drop version error frame. - * DROP_MULTICAST: Drop multicast frames. - * DROP_BORADCAST: Drop broadcast frames. - * ROP_ACK_CTS: Drop received ACK and CTS. - */ -#define TXRX_CSR0 0x3040 -#define TXRX_CSR0_RX_ACK_TIMEOUT FIELD32(0x000001ff) -#define TXRX_CSR0_TSF_OFFSET FIELD32(0x00007e00) -#define TXRX_CSR0_AUTO_TX_SEQ FIELD32(0x00008000) -#define TXRX_CSR0_DISABLE_RX FIELD32(0x00010000) -#define TXRX_CSR0_DROP_CRC FIELD32(0x00020000) -#define TXRX_CSR0_DROP_PHYSICAL FIELD32(0x00040000) -#define TXRX_CSR0_DROP_CONTROL FIELD32(0x00080000) -#define TXRX_CSR0_DROP_NOT_TO_ME FIELD32(0x00100000) -#define TXRX_CSR0_DROP_TO_DS FIELD32(0x00200000) -#define TXRX_CSR0_DROP_VERSION_ERROR FIELD32(0x00400000) -#define TXRX_CSR0_DROP_MULTICAST FIELD32(0x00800000) -#define TXRX_CSR0_DROP_BORADCAST FIELD32(0x01000000) -#define TXRX_CSR0_DROP_ACK_CTS FIELD32(0x02000000) -#define TXRX_CSR0_TX_WITHOUT_WAITING FIELD32(0x04000000) - -/* - * TXRX_CSR1 - */ -#define TXRX_CSR1 0x3044 -#define TXRX_CSR1_BBP_ID0 FIELD32(0x0000007f) -#define TXRX_CSR1_BBP_ID0_VALID FIELD32(0x00000080) -#define TXRX_CSR1_BBP_ID1 FIELD32(0x00007f00) -#define TXRX_CSR1_BBP_ID1_VALID FIELD32(0x00008000) -#define TXRX_CSR1_BBP_ID2 FIELD32(0x007f0000) -#define TXRX_CSR1_BBP_ID2_VALID FIELD32(0x00800000) -#define TXRX_CSR1_BBP_ID3 FIELD32(0x7f000000) -#define TXRX_CSR1_BBP_ID3_VALID FIELD32(0x80000000) - -/* - * TXRX_CSR2 - */ -#define TXRX_CSR2 0x3048 -#define TXRX_CSR2_BBP_ID0 FIELD32(0x0000007f) -#define TXRX_CSR2_BBP_ID0_VALID FIELD32(0x00000080) -#define TXRX_CSR2_BBP_ID1 FIELD32(0x00007f00) -#define TXRX_CSR2_BBP_ID1_VALID FIELD32(0x00008000) -#define TXRX_CSR2_BBP_ID2 FIELD32(0x007f0000) -#define TXRX_CSR2_BBP_ID2_VALID FIELD32(0x00800000) -#define TXRX_CSR2_BBP_ID3 FIELD32(0x7f000000) -#define TXRX_CSR2_BBP_ID3_VALID FIELD32(0x80000000) - -/* - * TXRX_CSR3 - */ -#define TXRX_CSR3 0x304c -#define TXRX_CSR3_BBP_ID0 FIELD32(0x0000007f) -#define TXRX_CSR3_BBP_ID0_VALID FIELD32(0x00000080) -#define TXRX_CSR3_BBP_ID1 FIELD32(0x00007f00) -#define TXRX_CSR3_BBP_ID1_VALID FIELD32(0x00008000) -#define TXRX_CSR3_BBP_ID2 FIELD32(0x007f0000) -#define TXRX_CSR3_BBP_ID2_VALID FIELD32(0x00800000) -#define TXRX_CSR3_BBP_ID3 FIELD32(0x7f000000) -#define TXRX_CSR3_BBP_ID3_VALID FIELD32(0x80000000) - -/* - * TXRX_CSR4: Auto-Responder/Tx-retry register. - * AUTORESPOND_PREAMBLE: 0:long, 1:short preamble. - * OFDM_TX_RATE_DOWN: 1:enable. - * OFDM_TX_RATE_STEP: 0:1-step, 1: 2-step, 2:3-step, 3:4-step. - * OFDM_TX_FALLBACK_CCK: 0: Fallback to OFDM 6M only, 1: Fallback to CCK 1M,2M. - */ -#define TXRX_CSR4 0x3050 -#define TXRX_CSR4_TX_ACK_TIMEOUT FIELD32(0x000000ff) -#define TXRX_CSR4_CNTL_ACK_POLICY FIELD32(0x00000700) -#define TXRX_CSR4_ACK_CTS_PSM FIELD32(0x00010000) -#define TXRX_CSR4_AUTORESPOND_ENABLE FIELD32(0x00020000) -#define TXRX_CSR4_AUTORESPOND_PREAMBLE FIELD32(0x00040000) -#define TXRX_CSR4_OFDM_TX_RATE_DOWN FIELD32(0x00080000) -#define TXRX_CSR4_OFDM_TX_RATE_STEP FIELD32(0x00300000) -#define TXRX_CSR4_OFDM_TX_FALLBACK_CCK FIELD32(0x00400000) -#define TXRX_CSR4_LONG_RETRY_LIMIT FIELD32(0x0f000000) -#define TXRX_CSR4_SHORT_RETRY_LIMIT FIELD32(0xf0000000) - -/* - * TXRX_CSR5 - */ -#define TXRX_CSR5 0x3054 - -/* - * TXRX_CSR6: ACK/CTS payload consumed time - */ -#define TXRX_CSR6 0x3058 - -/* - * TXRX_CSR7: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps. - */ -#define TXRX_CSR7 0x305c -#define TXRX_CSR7_ACK_CTS_6MBS FIELD32(0x000000ff) -#define TXRX_CSR7_ACK_CTS_9MBS FIELD32(0x0000ff00) -#define TXRX_CSR7_ACK_CTS_12MBS FIELD32(0x00ff0000) -#define TXRX_CSR7_ACK_CTS_18MBS FIELD32(0xff000000) - -/* - * TXRX_CSR8: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps. - */ -#define TXRX_CSR8 0x3060 -#define TXRX_CSR8_ACK_CTS_24MBS FIELD32(0x000000ff) -#define TXRX_CSR8_ACK_CTS_36MBS FIELD32(0x0000ff00) -#define TXRX_CSR8_ACK_CTS_48MBS FIELD32(0x00ff0000) -#define TXRX_CSR8_ACK_CTS_54MBS FIELD32(0xff000000) - -/* - * TXRX_CSR9: Synchronization control register. - * BEACON_INTERVAL: In unit of 1/16 TU. - * TSF_TICKING: Enable TSF auto counting. - * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode. - * BEACON_GEN: Enable beacon generator. - */ -#define TXRX_CSR9 0x3064 -#define TXRX_CSR9_BEACON_INTERVAL FIELD32(0x0000ffff) -#define TXRX_CSR9_TSF_TICKING FIELD32(0x00010000) -#define TXRX_CSR9_TSF_SYNC FIELD32(0x00060000) -#define TXRX_CSR9_TBTT_ENABLE FIELD32(0x00080000) -#define TXRX_CSR9_BEACON_GEN FIELD32(0x00100000) -#define TXRX_CSR9_TIMESTAMP_COMPENSATE FIELD32(0xff000000) - -/* - * TXRX_CSR10: BEACON alignment. - */ -#define TXRX_CSR10 0x3068 - -/* - * TXRX_CSR11: AES mask. - */ -#define TXRX_CSR11 0x306c - -/* - * TXRX_CSR12: TSF low 32. - */ -#define TXRX_CSR12 0x3070 -#define TXRX_CSR12_LOW_TSFTIMER FIELD32(0xffffffff) - -/* - * TXRX_CSR13: TSF high 32. - */ -#define TXRX_CSR13 0x3074 -#define TXRX_CSR13_HIGH_TSFTIMER FIELD32(0xffffffff) - -/* - * TXRX_CSR14: TBTT timer. - */ -#define TXRX_CSR14 0x3078 - -/* - * TXRX_CSR15: TKIP MIC priority byte "AND" mask. - */ -#define TXRX_CSR15 0x307c - -/* - * PHY control registers. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * PHY_CSR0: RF/PS control. - */ -#define PHY_CSR0 0x3080 -#define PHY_CSR0_PA_PE_BG FIELD32(0x00010000) -#define PHY_CSR0_PA_PE_A FIELD32(0x00020000) - -/* - * PHY_CSR1 - */ -#define PHY_CSR1 0x3084 - -/* - * PHY_CSR2: Pre-TX BBP control. - */ -#define PHY_CSR2 0x3088 - -/* - * PHY_CSR3: BBP serial control register. - * VALUE: Register value to program into BBP. - * REG_NUM: Selected BBP register. - * READ_CONTROL: 0: Write BBP, 1: Read BBP. - * BUSY: 1: ASIC is busy execute BBP programming. - */ -#define PHY_CSR3 0x308c -#define PHY_CSR3_VALUE FIELD32(0x000000ff) -#define PHY_CSR3_REGNUM FIELD32(0x00007f00) -#define PHY_CSR3_READ_CONTROL FIELD32(0x00008000) -#define PHY_CSR3_BUSY FIELD32(0x00010000) - -/* - * PHY_CSR4: RF serial control register - * VALUE: Register value (include register id) serial out to RF/IF chip. - * NUMBER_OF_BITS: Number of bits used in RFRegValue (I:20, RFMD:22). - * IF_SELECT: 1: select IF to program, 0: select RF to program. - * PLL_LD: RF PLL_LD status. - * BUSY: 1: ASIC is busy execute RF programming. - */ -#define PHY_CSR4 0x3090 -#define PHY_CSR4_VALUE FIELD32(0x00ffffff) -#define PHY_CSR4_NUMBER_OF_BITS FIELD32(0x1f000000) -#define PHY_CSR4_IF_SELECT FIELD32(0x20000000) -#define PHY_CSR4_PLL_LD FIELD32(0x40000000) -#define PHY_CSR4_BUSY FIELD32(0x80000000) - -/* - * PHY_CSR5: RX to TX signal switch timing control. - */ -#define PHY_CSR5 0x3094 -#define PHY_CSR5_IQ_FLIP FIELD32(0x00000004) - -/* - * PHY_CSR6: TX to RX signal timing control. - */ -#define PHY_CSR6 0x3098 -#define PHY_CSR6_IQ_FLIP FIELD32(0x00000004) - -/* - * PHY_CSR7: TX DAC switching timing control. - */ -#define PHY_CSR7 0x309c - -/* - * Security control register. - */ - -/* - * SEC_CSR0: Shared key table control. - */ -#define SEC_CSR0 0x30a0 -#define SEC_CSR0_BSS0_KEY0_VALID FIELD32(0x00000001) -#define SEC_CSR0_BSS0_KEY1_VALID FIELD32(0x00000002) -#define SEC_CSR0_BSS0_KEY2_VALID FIELD32(0x00000004) -#define SEC_CSR0_BSS0_KEY3_VALID FIELD32(0x00000008) -#define SEC_CSR0_BSS1_KEY0_VALID FIELD32(0x00000010) -#define SEC_CSR0_BSS1_KEY1_VALID FIELD32(0x00000020) -#define SEC_CSR0_BSS1_KEY2_VALID FIELD32(0x00000040) -#define SEC_CSR0_BSS1_KEY3_VALID FIELD32(0x00000080) -#define SEC_CSR0_BSS2_KEY0_VALID FIELD32(0x00000100) -#define SEC_CSR0_BSS2_KEY1_VALID FIELD32(0x00000200) -#define SEC_CSR0_BSS2_KEY2_VALID FIELD32(0x00000400) -#define SEC_CSR0_BSS2_KEY3_VALID FIELD32(0x00000800) -#define SEC_CSR0_BSS3_KEY0_VALID FIELD32(0x00001000) -#define SEC_CSR0_BSS3_KEY1_VALID FIELD32(0x00002000) -#define SEC_CSR0_BSS3_KEY2_VALID FIELD32(0x00004000) -#define SEC_CSR0_BSS3_KEY3_VALID FIELD32(0x00008000) - -/* - * SEC_CSR1: Shared key table security mode register. - */ -#define SEC_CSR1 0x30a4 -#define SEC_CSR1_BSS0_KEY0_CIPHER_ALG FIELD32(0x00000007) -#define SEC_CSR1_BSS0_KEY1_CIPHER_ALG FIELD32(0x00000070) -#define SEC_CSR1_BSS0_KEY2_CIPHER_ALG FIELD32(0x00000700) -#define SEC_CSR1_BSS0_KEY3_CIPHER_ALG FIELD32(0x00007000) -#define SEC_CSR1_BSS1_KEY0_CIPHER_ALG FIELD32(0x00070000) -#define SEC_CSR1_BSS1_KEY1_CIPHER_ALG FIELD32(0x00700000) -#define SEC_CSR1_BSS1_KEY2_CIPHER_ALG FIELD32(0x07000000) -#define SEC_CSR1_BSS1_KEY3_CIPHER_ALG FIELD32(0x70000000) - -/* - * Pairwise key table valid bitmap registers. - * SEC_CSR2: pairwise key table valid bitmap 0. - * SEC_CSR3: pairwise key table valid bitmap 1. - */ -#define SEC_CSR2 0x30a8 -#define SEC_CSR3 0x30ac - -/* - * SEC_CSR4: Pairwise key table lookup control. - */ -#define SEC_CSR4 0x30b0 - -/* - * SEC_CSR5: shared key table security mode register. - */ -#define SEC_CSR5 0x30b4 -#define SEC_CSR5_BSS2_KEY0_CIPHER_ALG FIELD32(0x00000007) -#define SEC_CSR5_BSS2_KEY1_CIPHER_ALG FIELD32(0x00000070) -#define SEC_CSR5_BSS2_KEY2_CIPHER_ALG FIELD32(0x00000700) -#define SEC_CSR5_BSS2_KEY3_CIPHER_ALG FIELD32(0x00007000) -#define SEC_CSR5_BSS3_KEY0_CIPHER_ALG FIELD32(0x00070000) -#define SEC_CSR5_BSS3_KEY1_CIPHER_ALG FIELD32(0x00700000) -#define SEC_CSR5_BSS3_KEY2_CIPHER_ALG FIELD32(0x07000000) -#define SEC_CSR5_BSS3_KEY3_CIPHER_ALG FIELD32(0x70000000) - -/* - * STA control registers. - */ - -/* - * STA_CSR0: RX PLCP error count & RX FCS error count. - */ -#define STA_CSR0 0x30c0 -#define STA_CSR0_FCS_ERROR FIELD32(0x0000ffff) -#define STA_CSR0_PLCP_ERROR FIELD32(0xffff0000) - -/* - * STA_CSR1: RX False CCA count & RX LONG frame count. - */ -#define STA_CSR1 0x30c4 -#define STA_CSR1_PHYSICAL_ERROR FIELD32(0x0000ffff) -#define STA_CSR1_FALSE_CCA_ERROR FIELD32(0xffff0000) - -/* - * STA_CSR2: TX Beacon count and RX FIFO overflow count. - */ -#define STA_CSR2 0x30c8 -#define STA_CSR2_RX_FIFO_OVERFLOW_COUNT FIELD32(0x0000ffff) -#define STA_CSR2_RX_OVERFLOW_COUNT FIELD32(0xffff0000) - -/* - * STA_CSR3: TX Beacon count. - */ -#define STA_CSR3 0x30cc -#define STA_CSR3_TX_BEACON_COUNT FIELD32(0x0000ffff) - -/* - * STA_CSR4: TX Result status register. - * VALID: 1:This register contains a valid TX result. - */ -#define STA_CSR4 0x30d0 -#define STA_CSR4_VALID FIELD32(0x00000001) -#define STA_CSR4_TX_RESULT FIELD32(0x0000000e) -#define STA_CSR4_RETRY_COUNT FIELD32(0x000000f0) -#define STA_CSR4_PID_SUBTYPE FIELD32(0x00001f00) -#define STA_CSR4_PID_TYPE FIELD32(0x0000e000) -#define STA_CSR4_TXRATE FIELD32(0x000f0000) - -/* - * QOS control registers. - */ - -/* - * QOS_CSR0: TXOP holder MAC address register. - */ -#define QOS_CSR0 0x30e0 -#define QOS_CSR0_BYTE0 FIELD32(0x000000ff) -#define QOS_CSR0_BYTE1 FIELD32(0x0000ff00) -#define QOS_CSR0_BYTE2 FIELD32(0x00ff0000) -#define QOS_CSR0_BYTE3 FIELD32(0xff000000) - -/* - * QOS_CSR1: TXOP holder MAC address register. - */ -#define QOS_CSR1 0x30e4 -#define QOS_CSR1_BYTE4 FIELD32(0x000000ff) -#define QOS_CSR1_BYTE5 FIELD32(0x0000ff00) - -/* - * QOS_CSR2: TXOP holder timeout register. - */ -#define QOS_CSR2 0x30e8 - -/* - * RX QOS-CFPOLL MAC address register. - * QOS_CSR3: RX QOS-CFPOLL MAC address 0. - * QOS_CSR4: RX QOS-CFPOLL MAC address 1. - */ -#define QOS_CSR3 0x30ec -#define QOS_CSR4 0x30f0 - -/* - * QOS_CSR5: "QosControl" field of the RX QOS-CFPOLL. - */ -#define QOS_CSR5 0x30f4 - -/* - * Host DMA registers. - */ - -/* - * AC0_BASE_CSR: AC_BK base address. - */ -#define AC0_BASE_CSR 0x3400 -#define AC0_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) - -/* - * AC1_BASE_CSR: AC_BE base address. - */ -#define AC1_BASE_CSR 0x3404 -#define AC1_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) - -/* - * AC2_BASE_CSR: AC_VI base address. - */ -#define AC2_BASE_CSR 0x3408 -#define AC2_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) - -/* - * AC3_BASE_CSR: AC_VO base address. - */ -#define AC3_BASE_CSR 0x340c -#define AC3_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) - -/* - * MGMT_BASE_CSR: MGMT ring base address. - */ -#define MGMT_BASE_CSR 0x3410 -#define MGMT_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) - -/* - * TX_RING_CSR0: TX Ring size for AC_BK, AC_BE, AC_VI, AC_VO. - */ -#define TX_RING_CSR0 0x3418 -#define TX_RING_CSR0_AC0_RING_SIZE FIELD32(0x000000ff) -#define TX_RING_CSR0_AC1_RING_SIZE FIELD32(0x0000ff00) -#define TX_RING_CSR0_AC2_RING_SIZE FIELD32(0x00ff0000) -#define TX_RING_CSR0_AC3_RING_SIZE FIELD32(0xff000000) - -/* - * TX_RING_CSR1: TX Ring size for MGMT Ring, HCCA Ring - * TXD_SIZE: In unit of 32-bit. - */ -#define TX_RING_CSR1 0x341c -#define TX_RING_CSR1_MGMT_RING_SIZE FIELD32(0x000000ff) -#define TX_RING_CSR1_HCCA_RING_SIZE FIELD32(0x0000ff00) -#define TX_RING_CSR1_TXD_SIZE FIELD32(0x003f0000) - -/* - * AIFSN_CSR: AIFSN for each EDCA AC. - * AIFSN0: For AC_BK. - * AIFSN1: For AC_BE. - * AIFSN2: For AC_VI. - * AIFSN3: For AC_VO. - */ -#define AIFSN_CSR 0x3420 -#define AIFSN_CSR_AIFSN0 FIELD32(0x0000000f) -#define AIFSN_CSR_AIFSN1 FIELD32(0x000000f0) -#define AIFSN_CSR_AIFSN2 FIELD32(0x00000f00) -#define AIFSN_CSR_AIFSN3 FIELD32(0x0000f000) - -/* - * CWMIN_CSR: CWmin for each EDCA AC. - * CWMIN0: For AC_BK. - * CWMIN1: For AC_BE. - * CWMIN2: For AC_VI. - * CWMIN3: For AC_VO. - */ -#define CWMIN_CSR 0x3424 -#define CWMIN_CSR_CWMIN0 FIELD32(0x0000000f) -#define CWMIN_CSR_CWMIN1 FIELD32(0x000000f0) -#define CWMIN_CSR_CWMIN2 FIELD32(0x00000f00) -#define CWMIN_CSR_CWMIN3 FIELD32(0x0000f000) - -/* - * CWMAX_CSR: CWmax for each EDCA AC. - * CWMAX0: For AC_BK. - * CWMAX1: For AC_BE. - * CWMAX2: For AC_VI. - * CWMAX3: For AC_VO. - */ -#define CWMAX_CSR 0x3428 -#define CWMAX_CSR_CWMAX0 FIELD32(0x0000000f) -#define CWMAX_CSR_CWMAX1 FIELD32(0x000000f0) -#define CWMAX_CSR_CWMAX2 FIELD32(0x00000f00) -#define CWMAX_CSR_CWMAX3 FIELD32(0x0000f000) - -/* - * TX_DMA_DST_CSR: TX DMA destination - * 0: TX ring0, 1: TX ring1, 2: TX ring2 3: invalid - */ -#define TX_DMA_DST_CSR 0x342c -#define TX_DMA_DST_CSR_DEST_AC0 FIELD32(0x00000003) -#define TX_DMA_DST_CSR_DEST_AC1 FIELD32(0x0000000c) -#define TX_DMA_DST_CSR_DEST_AC2 FIELD32(0x00000030) -#define TX_DMA_DST_CSR_DEST_AC3 FIELD32(0x000000c0) -#define TX_DMA_DST_CSR_DEST_MGMT FIELD32(0x00000300) - -/* - * TX_CNTL_CSR: KICK/Abort TX. - * KICK_TX_AC0: For AC_BK. - * KICK_TX_AC1: For AC_BE. - * KICK_TX_AC2: For AC_VI. - * KICK_TX_AC3: For AC_VO. - * ABORT_TX_AC0: For AC_BK. - * ABORT_TX_AC1: For AC_BE. - * ABORT_TX_AC2: For AC_VI. - * ABORT_TX_AC3: For AC_VO. - */ -#define TX_CNTL_CSR 0x3430 -#define TX_CNTL_CSR_KICK_TX_AC0 FIELD32(0x00000001) -#define TX_CNTL_CSR_KICK_TX_AC1 FIELD32(0x00000002) -#define TX_CNTL_CSR_KICK_TX_AC2 FIELD32(0x00000004) -#define TX_CNTL_CSR_KICK_TX_AC3 FIELD32(0x00000008) -#define TX_CNTL_CSR_KICK_TX_MGMT FIELD32(0x00000010) -#define TX_CNTL_CSR_ABORT_TX_AC0 FIELD32(0x00010000) -#define TX_CNTL_CSR_ABORT_TX_AC1 FIELD32(0x00020000) -#define TX_CNTL_CSR_ABORT_TX_AC2 FIELD32(0x00040000) -#define TX_CNTL_CSR_ABORT_TX_AC3 FIELD32(0x00080000) -#define TX_CNTL_CSR_ABORT_TX_MGMT FIELD32(0x00100000) - -/* - * LOAD_TX_RING_CSR: Load RX de - */ -#define LOAD_TX_RING_CSR 0x3434 -#define LOAD_TX_RING_CSR_LOAD_TXD_AC0 FIELD32(0x00000001) -#define LOAD_TX_RING_CSR_LOAD_TXD_AC1 FIELD32(0x00000002) -#define LOAD_TX_RING_CSR_LOAD_TXD_AC2 FIELD32(0x00000004) -#define LOAD_TX_RING_CSR_LOAD_TXD_AC3 FIELD32(0x00000008) -#define LOAD_TX_RING_CSR_LOAD_TXD_MGMT FIELD32(0x00000010) - -/* - * Several read-only registers, for debugging. - */ -#define AC0_TXPTR_CSR 0x3438 -#define AC1_TXPTR_CSR 0x343c -#define AC2_TXPTR_CSR 0x3440 -#define AC3_TXPTR_CSR 0x3444 -#define MGMT_TXPTR_CSR 0x3448 - -/* - * RX_BASE_CSR - */ -#define RX_BASE_CSR 0x3450 -#define RX_BASE_CSR_RING_REGISTER FIELD32(0xffffffff) - -/* - * RX_RING_CSR. - * RXD_SIZE: In unit of 32-bit. - */ -#define RX_RING_CSR 0x3454 -#define RX_RING_CSR_RING_SIZE FIELD32(0x000000ff) -#define RX_RING_CSR_RXD_SIZE FIELD32(0x00003f00) -#define RX_RING_CSR_RXD_WRITEBACK_SIZE FIELD32(0x00070000) - -/* - * RX_CNTL_CSR - */ -#define RX_CNTL_CSR 0x3458 -#define RX_CNTL_CSR_ENABLE_RX_DMA FIELD32(0x00000001) -#define RX_CNTL_CSR_LOAD_RXD FIELD32(0x00000002) - -/* - * RXPTR_CSR: Read-only, for debugging. - */ -#define RXPTR_CSR 0x345c - -/* - * PCI_CFG_CSR - */ -#define PCI_CFG_CSR 0x3460 - -/* - * BUF_FORMAT_CSR - */ -#define BUF_FORMAT_CSR 0x3464 - -/* - * INT_SOURCE_CSR: Interrupt source register. - * Write one to clear corresponding bit. - */ -#define INT_SOURCE_CSR 0x3468 -#define INT_SOURCE_CSR_TXDONE FIELD32(0x00000001) -#define INT_SOURCE_CSR_RXDONE FIELD32(0x00000002) -#define INT_SOURCE_CSR_BEACON_DONE FIELD32(0x00000004) -#define INT_SOURCE_CSR_TX_ABORT_DONE FIELD32(0x00000010) -#define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00010000) -#define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00020000) -#define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00040000) -#define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00080000) -#define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00100000) -#define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00200000) - -/* - * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF. - * MITIGATION_PERIOD: Interrupt mitigation in unit of 32 PCI clock. - */ -#define INT_MASK_CSR 0x346c -#define INT_MASK_CSR_TXDONE FIELD32(0x00000001) -#define INT_MASK_CSR_RXDONE FIELD32(0x00000002) -#define INT_MASK_CSR_BEACON_DONE FIELD32(0x00000004) -#define INT_MASK_CSR_TX_ABORT_DONE FIELD32(0x00000010) -#define INT_MASK_CSR_ENABLE_MITIGATION FIELD32(0x00000080) -#define INT_MASK_CSR_MITIGATION_PERIOD FIELD32(0x0000ff00) -#define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00010000) -#define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00020000) -#define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00040000) -#define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00080000) -#define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00100000) -#define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00200000) - -/* - * E2PROM_CSR: EEPROM control register. - * RELOAD: Write 1 to reload eeprom content. - * TYPE_93C46: 1: 93c46, 0:93c66. - * LOAD_STATUS: 1:loading, 0:done. - */ -#define E2PROM_CSR 0x3470 -#define E2PROM_CSR_RELOAD FIELD32(0x00000001) -#define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000002) -#define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000004) -#define E2PROM_CSR_DATA_IN FIELD32(0x00000008) -#define E2PROM_CSR_DATA_OUT FIELD32(0x00000010) -#define E2PROM_CSR_TYPE_93C46 FIELD32(0x00000020) -#define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040) - -/* - * AC_TXOP_CSR0: AC_BK/AC_BE TXOP register. - * AC0_TX_OP: For AC_BK, in unit of 32us. - * AC1_TX_OP: For AC_BE, in unit of 32us. - */ -#define AC_TXOP_CSR0 0x3474 -#define AC_TXOP_CSR0_AC0_TX_OP FIELD32(0x0000ffff) -#define AC_TXOP_CSR0_AC1_TX_OP FIELD32(0xffff0000) - -/* - * AC_TXOP_CSR1: AC_VO/AC_VI TXOP register. - * AC2_TX_OP: For AC_VI, in unit of 32us. - * AC3_TX_OP: For AC_VO, in unit of 32us. - */ -#define AC_TXOP_CSR1 0x3478 -#define AC_TXOP_CSR1_AC2_TX_OP FIELD32(0x0000ffff) -#define AC_TXOP_CSR1_AC3_TX_OP FIELD32(0xffff0000) - -/* - * DMA_STATUS_CSR - */ -#define DMA_STATUS_CSR 0x3480 - -/* - * TEST_MODE_CSR - */ -#define TEST_MODE_CSR 0x3484 - -/* - * UART0_TX_CSR - */ -#define UART0_TX_CSR 0x3488 - -/* - * UART0_RX_CSR - */ -#define UART0_RX_CSR 0x348c - -/* - * UART0_FRAME_CSR - */ -#define UART0_FRAME_CSR 0x3490 - -/* - * UART0_BUFFER_CSR - */ -#define UART0_BUFFER_CSR 0x3494 - -/* - * IO_CNTL_CSR - */ -#define IO_CNTL_CSR 0x3498 - -/* - * UART_INT_SOURCE_CSR - */ -#define UART_INT_SOURCE_CSR 0x34a8 - -/* - * UART_INT_MASK_CSR - */ -#define UART_INT_MASK_CSR 0x34ac - -/* - * PBF_QUEUE_CSR - */ -#define PBF_QUEUE_CSR 0x34b0 - -/* - * Firmware DMA registers. - * Firmware DMA registers are dedicated for MCU usage - * and should not be touched by host driver. - * Therefore we skip the definition of these registers. - */ -#define FW_TX_BASE_CSR 0x34c0 -#define FW_TX_START_CSR 0x34c4 -#define FW_TX_LAST_CSR 0x34c8 -#define FW_MODE_CNTL_CSR 0x34cc -#define FW_TXPTR_CSR 0x34d0 - -/* - * 8051 firmware image. - */ -#define FIRMWARE_RT2561 "rt2561.bin" -#define FIRMWARE_RT2561s "rt2561s.bin" -#define FIRMWARE_RT2661 "rt2661.bin" -#define FIRMWARE_IMAGE_BASE 0x4000 - -/* - * BBP registers. - * The wordsize of the BBP is 8 bits. - */ - -/* - * R2 - */ -#define BBP_R2_BG_MODE FIELD8(0x20) - -/* - * R3 - */ -#define BBP_R3_SMART_MODE FIELD8(0x01) - -/* - * R4: RX antenna control - * FRAME_END: 1 - DPDT, 0 - SPDT (Only valid for 802.11G, RF2527 & RF2529) - */ -#define BBP_R4_RX_ANTENNA FIELD8(0x03) -#define BBP_R4_RX_FRAME_END FIELD8(0x20) - -/* - * R77 - */ -#define BBP_R77_PAIR FIELD8(0x03) - -/* - * RF registers - */ - -/* - * RF 3 - */ -#define RF3_TXPOWER FIELD32(0x00003e00) - -/* - * RF 4 - */ -#define RF4_FREQ_OFFSET FIELD32(0x0003f000) - -/* - * EEPROM content. - * The wordsize of the EEPROM is 16 bits. - */ - -/* - * HW MAC address. - */ -#define EEPROM_MAC_ADDR_0 0x0002 -#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) -#define EEPROM_MAC_ADDR1 0x0004 -#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) -#define EEPROM_MAC_ADDR_2 0x0006 -#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) - -/* - * EEPROM antenna. - * ANTENNA_NUM: Number of antenna's. - * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * FRAME_TYPE: 0: DPDT , 1: SPDT , noted this bit is valid for g only. - * DYN_TXAGC: Dynamic TX AGC control. - * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0. - * RF_TYPE: Rf_type of this adapter. - */ -#define EEPROM_ANTENNA 0x0010 -#define EEPROM_ANTENNA_NUM FIELD16(0x0003) -#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c) -#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030) -#define EEPROM_ANTENNA_FRAME_TYPE FIELD16(0x0040) -#define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200) -#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400) -#define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800) - -/* - * EEPROM NIC config. - * ENABLE_DIVERSITY: 1:enable, 0:disable. - * EXTERNAL_LNA_BG: External LNA enable for 2.4G. - * CARDBUS_ACCEL: 0:enable, 1:disable. - * EXTERNAL_LNA_A: External LNA enable for 5G. - */ -#define EEPROM_NIC 0x0011 -#define EEPROM_NIC_ENABLE_DIVERSITY FIELD16(0x0001) -#define EEPROM_NIC_TX_DIVERSITY FIELD16(0x0002) -#define EEPROM_NIC_TX_RX_FIXED FIELD16(0x000c) -#define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0010) -#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0020) -#define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0040) - -/* - * EEPROM geography. - * GEO_A: Default geographical setting for 5GHz band - * GEO: Default geographical setting. - */ -#define EEPROM_GEOGRAPHY 0x0012 -#define EEPROM_GEOGRAPHY_GEO_A FIELD16(0x00ff) -#define EEPROM_GEOGRAPHY_GEO FIELD16(0xff00) - -/* - * EEPROM BBP. - */ -#define EEPROM_BBP_START 0x0013 -#define EEPROM_BBP_SIZE 16 -#define EEPROM_BBP_VALUE FIELD16(0x00ff) -#define EEPROM_BBP_REG_ID FIELD16(0xff00) - -/* - * EEPROM TXPOWER 802.11G - */ -#define EEPROM_TXPOWER_G_START 0x0023 -#define EEPROM_TXPOWER_G_SIZE 7 -#define EEPROM_TXPOWER_G_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_G_2 FIELD16(0xff00) - -/* - * EEPROM Frequency - */ -#define EEPROM_FREQ 0x002f -#define EEPROM_FREQ_OFFSET FIELD16(0x00ff) -#define EEPROM_FREQ_SEQ_MASK FIELD16(0xff00) -#define EEPROM_FREQ_SEQ FIELD16(0x0300) - -/* - * EEPROM LED. - * POLARITY_RDY_G: Polarity RDY_G setting. - * POLARITY_RDY_A: Polarity RDY_A setting. - * POLARITY_ACT: Polarity ACT setting. - * POLARITY_GPIO_0: Polarity GPIO0 setting. - * POLARITY_GPIO_1: Polarity GPIO1 setting. - * POLARITY_GPIO_2: Polarity GPIO2 setting. - * POLARITY_GPIO_3: Polarity GPIO3 setting. - * POLARITY_GPIO_4: Polarity GPIO4 setting. - * LED_MODE: Led mode. - */ -#define EEPROM_LED 0x0030 -#define EEPROM_LED_POLARITY_RDY_G FIELD16(0x0001) -#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002) -#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004) -#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008) -#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010) -#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020) -#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040) -#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080) -#define EEPROM_LED_LED_MODE FIELD16(0x1f00) - -/* - * EEPROM TXPOWER 802.11A - */ -#define EEPROM_TXPOWER_A_START 0x0031 -#define EEPROM_TXPOWER_A_SIZE 12 -#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_A_2 FIELD16(0xff00) - -/* - * EEPROM RSSI offset 802.11BG - */ -#define EEPROM_RSSI_OFFSET_BG 0x004d -#define EEPROM_RSSI_OFFSET_BG_1 FIELD16(0x00ff) -#define EEPROM_RSSI_OFFSET_BG_2 FIELD16(0xff00) - -/* - * EEPROM RSSI offset 802.11A - */ -#define EEPROM_RSSI_OFFSET_A 0x004e -#define EEPROM_RSSI_OFFSET_A_1 FIELD16(0x00ff) -#define EEPROM_RSSI_OFFSET_A_2 FIELD16(0xff00) - -/* - * MCU mailbox commands. - */ -#define MCU_SLEEP 0x30 -#define MCU_WAKEUP 0x31 -#define MCU_LED 0x50 -#define MCU_LED_STRENGTH 0x52 - -/* - * DMA descriptor defines. - */ -#define TXD_DESC_SIZE ( 16 * sizeof(struct data_desc) ) -#define RXD_DESC_SIZE ( 16 * sizeof(struct data_desc) ) - -/* - * TX descriptor format for TX, PRIO and Beacon Ring. - */ - -/* - * Word0 - * TKIP_MIC: ASIC appends TKIP MIC if TKIP is used. - * KEY_TABLE: Use per-client pairwise KEY table. - * KEY_INDEX: - * Key index (0~31) to the pairwise KEY table. - * 0~3 to shared KEY table 0 (BSS0). - * 4~7 to shared KEY table 1 (BSS1). - * 8~11 to shared KEY table 2 (BSS2). - * 12~15 to shared KEY table 3 (BSS3). - * BURST: Next frame belongs to same "burst" event. - */ -#define TXD_W0_OWNER_NIC FIELD32(0x00000001) -#define TXD_W0_VALID FIELD32(0x00000002) -#define TXD_W0_MORE_FRAG FIELD32(0x00000004) -#define TXD_W0_ACK FIELD32(0x00000008) -#define TXD_W0_TIMESTAMP FIELD32(0x00000010) -#define TXD_W0_OFDM FIELD32(0x00000020) -#define TXD_W0_IFS FIELD32(0x00000040) -#define TXD_W0_RETRY_MODE FIELD32(0x00000080) -#define TXD_W0_TKIP_MIC FIELD32(0x00000100) -#define TXD_W0_KEY_TABLE FIELD32(0x00000200) -#define TXD_W0_KEY_INDEX FIELD32(0x0000fc00) -#define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) -#define TXD_W0_BURST FIELD32(0x10000000) -#define TXD_W0_CIPHER_ALG FIELD32(0xe0000000) - -/* - * Word1 - * HOST_Q_ID: EDCA/HCCA queue ID. - * HW_SEQUENCE: MAC overwrites the frame sequence number. - * BUFFER_COUNT: Number of buffers in this TXD. - */ -#define TXD_W1_HOST_Q_ID FIELD32(0x0000000f) -#define TXD_W1_AIFSN FIELD32(0x000000f0) -#define TXD_W1_CWMIN FIELD32(0x00000f00) -#define TXD_W1_CWMAX FIELD32(0x0000f000) -#define TXD_W1_IV_OFFSET FIELD32(0x003f0000) -#define TXD_W1_PIGGY_BACK FIELD32(0x01000000) -#define TXD_W1_HW_SEQUENCE FIELD32(0x10000000) -#define TXD_W1_BUFFER_COUNT FIELD32(0xe0000000) - -/* - * Word2: PLCP information - */ -#define TXD_W2_PLCP_SIGNAL FIELD32(0x000000ff) -#define TXD_W2_PLCP_SERVICE FIELD32(0x0000ff00) -#define TXD_W2_PLCP_LENGTH_LOW FIELD32(0x00ff0000) -#define TXD_W2_PLCP_LENGTH_HIGH FIELD32(0xff000000) - -/* - * Word3 - */ -#define TXD_W3_IV FIELD32(0xffffffff) - -/* - * Word4 - */ -#define TXD_W4_EIV FIELD32(0xffffffff) - -/* - * Word5 - * FRAME_OFFSET: Frame start offset inside ASIC TXFIFO (after TXINFO field). - * TXD_W5_PID_SUBTYPE: Driver assigned packet ID index for txdone handler. - * TXD_W5_PID_TYPE: Driver assigned packet ID type for txdone handler. - * WAITING_DMA_DONE_INT: TXD been filled with data - * and waiting for TxDoneISR housekeeping. - */ -#define TXD_W5_FRAME_OFFSET FIELD32(0x000000ff) -#define TXD_W5_PID_SUBTYPE FIELD32(0x00001f00) -#define TXD_W5_PID_TYPE FIELD32(0x0000e000) -#define TXD_W5_TX_POWER FIELD32(0x00ff0000) -#define TXD_W5_WAITING_DMA_DONE_INT FIELD32(0x01000000) - -/* - * the above 24-byte is called TXINFO and will be DMAed to MAC block - * through TXFIFO. MAC block use this TXINFO to control the transmission - * behavior of this frame. - * The following fields are not used by MAC block. - * They are used by DMA block and HOST driver only. - * Once a frame has been DMA to ASIC, all the following fields are useless - * to ASIC. - */ - -/* - * Word6-10: Buffer physical address - */ -#define TXD_W6_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) -#define TXD_W7_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) -#define TXD_W8_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) -#define TXD_W9_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) -#define TXD_W10_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) - -/* - * Word11-13: Buffer length - */ -#define TXD_W11_BUFFER_LENGTH0 FIELD32(0x00000fff) -#define TXD_W11_BUFFER_LENGTH1 FIELD32(0x0fff0000) -#define TXD_W12_BUFFER_LENGTH2 FIELD32(0x00000fff) -#define TXD_W12_BUFFER_LENGTH3 FIELD32(0x0fff0000) -#define TXD_W13_BUFFER_LENGTH4 FIELD32(0x00000fff) - -/* - * Word14 - */ -#define TXD_W14_SK_BUFFER FIELD32(0xffffffff) - -/* - * Word15 - */ -#define TXD_W15_NEXT_SK_BUFFER FIELD32(0xffffffff) - -/* - * RX descriptor format for RX Ring. - */ - -/* - * Word0 - * CIPHER_ERROR: 1:ICV error, 2:MIC error, 3:invalid key. - * KEY_INDEX: Decryption key actually used. - */ -#define RXD_W0_OWNER_NIC FIELD32(0x00000001) -#define RXD_W0_DROP FIELD32(0x00000002) -#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000004) -#define RXD_W0_MULTICAST FIELD32(0x00000008) -#define RXD_W0_BROADCAST FIELD32(0x00000010) -#define RXD_W0_MY_BSS FIELD32(0x00000020) -#define RXD_W0_CRC_ERROR FIELD32(0x00000040) -#define RXD_W0_OFDM FIELD32(0x00000080) -#define RXD_W0_CIPHER_ERROR FIELD32(0x00000300) -#define RXD_W0_KEY_INDEX FIELD32(0x0000fc00) -#define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) -#define RXD_W0_CIPHER_ALG FIELD32(0xe0000000) - -/* - * Word1 - * SIGNAL: RX raw data rate reported by BBP. - */ -#define RXD_W1_SIGNAL FIELD32(0x000000ff) -#define RXD_W1_RSSI_AGC FIELD32(0x00001f00) -#define RXD_W1_RSSI_LNA FIELD32(0x00006000) -#define RXD_W1_FRAME_OFFSET FIELD32(0x7f000000) - -/* - * Word2 - * IV: Received IV of originally encrypted. - */ -#define RXD_W2_IV FIELD32(0xffffffff) - -/* - * Word3 - * EIV: Received EIV of originally encrypted. - */ -#define RXD_W3_EIV FIELD32(0xffffffff) - -/* - * Word4 - */ -#define RXD_W4_RESERVED FIELD32(0xffffffff) - -/* - * the above 20-byte is called RXINFO and will be DMAed to MAC RX block - * and passed to the HOST driver. - * The following fields are for DMA block and HOST usage only. - * Can't be touched by ASIC MAC block. - */ - -/* - * Word5 - */ -#define RXD_W5_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff) - -/* - * Word6-15: Reserved - */ -#define RXD_W6_RESERVED FIELD32(0xffffffff) -#define RXD_W7_RESERVED FIELD32(0xffffffff) -#define RXD_W8_RESERVED FIELD32(0xffffffff) -#define RXD_W9_RESERVED FIELD32(0xffffffff) -#define RXD_W10_RESERVED FIELD32(0xffffffff) -#define RXD_W11_RESERVED FIELD32(0xffffffff) -#define RXD_W12_RESERVED FIELD32(0xffffffff) -#define RXD_W13_RESERVED FIELD32(0xffffffff) -#define RXD_W14_RESERVED FIELD32(0xffffffff) -#define RXD_W15_RESERVED FIELD32(0xffffffff) - -/* - * Macro's for converting txpower from EEPROM to dscape value - * and from dscape value to register value. - */ -#define MIN_TXPOWER 0 -#define MAX_TXPOWER 31 -#define DEFAULT_TXPOWER 24 - -#define TXPOWER_FROM_DEV(__txpower) \ -({ \ - ((__txpower) > MAX_TXPOWER) ? \ - DEFAULT_TXPOWER : (__txpower); \ -}) - -#define TXPOWER_TO_DEV(__txpower) \ -({ \ - ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \ - (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \ - (__txpower)); \ -}) - -#endif /* RT61PCI_H */ diff --git a/package/rt2x00/src/rt73usb.c b/package/rt2x00/src/rt73usb.c deleted file mode 100644 index c0671c2e6e7..00000000000 --- a/package/rt2x00/src/rt73usb.c +++ /dev/null @@ -1,2111 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt73usb - Abstract: rt73usb device specific routines. - Supported chipsets: rt2571W & rt2671. - */ - -/* - * Set enviroment defines for rt2x00.h - */ -#define DRV_NAME "rt73usb" - -#include -#include -#include -#include -#include -#include - -#include "rt2x00.h" -#include "rt2x00usb.h" -#include "rt73usb.h" - -/* - * Register access. - * All access to the CSR registers will go through the methods - * rt73usb_register_read and rt73usb_register_write. - * BBP and RF register require indirect register access, - * and use the CSR registers BBPCSR and RFCSR to achieve this. - * These indirect registers work with busy bits, - * and we will try maximal REGISTER_BUSY_COUNT times to access - * the register while taking a REGISTER_BUSY_DELAY us delay - * between each attampt. When the busy bit is still set at that time, - * the access attempt is considered to have failed, - * and we will print an error. - */ -static inline void rt73usb_register_read(const struct rt2x00_dev *rt2x00dev, - const unsigned int offset, u32 *value) -{ - __le32 reg; - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, - USB_VENDOR_REQUEST_IN, offset, - ®, sizeof(u32), REGISTER_TIMEOUT); - *value = le32_to_cpu(reg); -} - -static inline void rt73usb_register_multiread(const struct rt2x00_dev - *rt2x00dev, - const unsigned int offset, - void *value, const u32 length) -{ - int timeout = REGISTER_TIMEOUT * (length / sizeof(u32)); - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, - USB_VENDOR_REQUEST_IN, offset, - value, length, timeout); -} - -static inline void rt73usb_register_write(const struct rt2x00_dev *rt2x00dev, - const unsigned int offset, u32 value) -{ - __le32 reg = cpu_to_le32(value); - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, offset, - ®, sizeof(u32), REGISTER_TIMEOUT); -} - -static inline void rt73usb_register_multiwrite(const struct rt2x00_dev - *rt2x00dev, - const unsigned int offset, - void *value, const u32 length) -{ - int timeout = REGISTER_TIMEOUT * (length / sizeof(u32)); - rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, offset, - value, length, timeout); -} - -static u32 rt73usb_bbp_check(const struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - unsigned int i; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt73usb_register_read(rt2x00dev, PHY_CSR3, ®); - if (!rt2x00_get_field32(reg, PHY_CSR3_BUSY)) - break; - udelay(REGISTER_BUSY_DELAY); - } - - return reg; -} - -static void rt73usb_bbp_write(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u8 value) -{ - u32 reg; - - /* - * Wait until the BBP becomes ready. - */ - reg = rt73usb_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n"); - return; - } - - /* - * Write the data into the BBP. - */ - reg = 0; - rt2x00_set_field32(®, PHY_CSR3_VALUE, value); - rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); - rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); - rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 0); - - rt73usb_register_write(rt2x00dev, PHY_CSR3, reg); -} - -static void rt73usb_bbp_read(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, u8 *value) -{ - u32 reg; - - /* - * Wait until the BBP becomes ready. - */ - reg = rt73usb_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n"); - return; - } - - /* - * Write the request into the BBP. - */ - reg = 0; - rt2x00_set_field32(®, PHY_CSR3_REGNUM, word); - rt2x00_set_field32(®, PHY_CSR3_BUSY, 1); - rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 1); - - rt73usb_register_write(rt2x00dev, PHY_CSR3, reg); - - /* - * Wait until the BBP becomes ready. - */ - reg = rt73usb_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n"); - *value = 0xff; - return; - } - - *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE); -} - -static void rt73usb_rf_write(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u32 value) -{ - u32 reg; - unsigned int i; - - if (!word) - return; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt73usb_register_read(rt2x00dev, PHY_CSR4, ®); - if (!rt2x00_get_field32(reg, PHY_CSR4_BUSY)) - goto rf_write; - udelay(REGISTER_BUSY_DELAY); - } - - ERROR(rt2x00dev, "PHY_CSR4 register busy. Write failed.\n"); - return; - -rf_write: - reg = 0; - rt2x00_set_field32(®, PHY_CSR4_VALUE, value); - - /* - * RF5225 and RF2527 contain 21 bits per RF register value, - * all others contain 20 bits. - */ - rt2x00_set_field32(®, PHY_CSR4_NUMBER_OF_BITS, - 20 + !!(rt2x00_rf(&rt2x00dev->chip, RF5225) || - rt2x00_rf(&rt2x00dev->chip, RF2527))); - rt2x00_set_field32(®, PHY_CSR4_IF_SELECT, 0); - rt2x00_set_field32(®, PHY_CSR4_BUSY, 1); - - rt73usb_register_write(rt2x00dev, PHY_CSR4, reg); - rt2x00_rf_write(rt2x00dev, word, value); -} - -#ifdef CONFIG_RT2X00_LIB_DEBUGFS -#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u32)) ) - -static void rt73usb_read_csr(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 *data) -{ - rt73usb_register_read(rt2x00dev, CSR_OFFSET(word), data); -} - -static void rt73usb_write_csr(const struct rt2x00_dev *rt2x00dev, - const unsigned int word, u32 data) -{ - rt73usb_register_write(rt2x00dev, CSR_OFFSET(word), data); -} - -static const struct rt2x00debug rt73usb_rt2x00debug = { - .owner = THIS_MODULE, - .csr = { - .read = rt73usb_read_csr, - .write = rt73usb_write_csr, - .word_size = sizeof(u32), - .word_count = CSR_REG_SIZE / sizeof(u32), - }, - .eeprom = { - .read = rt2x00_eeprom_read, - .write = rt2x00_eeprom_write, - .word_size = sizeof(u16), - .word_count = EEPROM_SIZE / sizeof(u16), - }, - .bbp = { - .read = rt73usb_bbp_read, - .write = rt73usb_bbp_write, - .word_size = sizeof(u8), - .word_count = BBP_SIZE / sizeof(u8), - }, - .rf = { - .read = rt2x00_rf_read, - .write = rt73usb_rf_write, - .word_size = sizeof(u32), - .word_count = RF_SIZE / sizeof(u32), - }, -}; -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ - -/* - * Configuration handlers. - */ -static void rt73usb_config_mac_addr(struct rt2x00_dev *rt2x00dev, __le32 *mac) -{ - u32 tmp; - - tmp = le32_to_cpu(mac[1]); - rt2x00_set_field32(&tmp, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff); - mac[1] = cpu_to_le32(tmp); - - rt73usb_register_multiwrite(rt2x00dev, MAC_CSR2, mac, - (2 * sizeof(__le32))); -} - -static void rt73usb_config_bssid(struct rt2x00_dev *rt2x00dev, __le32 *bssid) -{ - u32 tmp; - - tmp = le32_to_cpu(bssid[1]); - rt2x00_set_field32(&tmp, MAC_CSR5_BSS_ID_MASK, 3); - bssid[1] = cpu_to_le32(tmp); - - rt73usb_register_multiwrite(rt2x00dev, MAC_CSR4, bssid, - (2 * sizeof(__le32))); -} - -static void rt73usb_config_type(struct rt2x00_dev *rt2x00dev, const int type, - const int tsf_sync) -{ - u32 reg; - - /* - * Clear current synchronisation setup. - * For the Beacon base registers we only need to clear - * the first byte since that byte contains the VALID and OWNER - * bits which (when set to 0) will invalidate the entire beacon. - */ - rt73usb_register_write(rt2x00dev, TXRX_CSR9, 0); - rt73usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0); - rt73usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0); - rt73usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0); - rt73usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0); - - /* - * Enable synchronisation. - */ - rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); - rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); - rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, tsf_sync); - rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); -} - -static void rt73usb_config_preamble(struct rt2x00_dev *rt2x00dev, - const int short_preamble, - const int ack_timeout, - const int ack_consume_time) -{ - u32 reg; - - /* - * When in atomic context, reschedule and let rt2x00lib - * call this function again. - */ - if (in_atomic()) { - queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->config_work); - return; - } - - rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, ack_timeout); - rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); - - rt73usb_register_read(rt2x00dev, TXRX_CSR4, ®); - rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE, - !!short_preamble); - rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg); -} - -static void rt73usb_config_phymode(struct rt2x00_dev *rt2x00dev, - const int basic_rate_mask) -{ - rt73usb_register_write(rt2x00dev, TXRX_CSR5, basic_rate_mask); -} - -static void rt73usb_config_channel(struct rt2x00_dev *rt2x00dev, - struct rf_channel *rf, const int txpower) -{ - u8 r3; - u8 r94; - u8 smart; - - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); - rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); - - smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) || - rt2x00_rf(&rt2x00dev->chip, RF2527)); - - rt73usb_bbp_read(rt2x00dev, 3, &r3); - rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart); - rt73usb_bbp_write(rt2x00dev, 3, r3); - - r94 = 6; - if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94)) - r94 += txpower - MAX_TXPOWER; - else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94)) - r94 += txpower; - rt73usb_bbp_write(rt2x00dev, 94, r94); - - rt73usb_rf_write(rt2x00dev, 1, rf->rf1); - rt73usb_rf_write(rt2x00dev, 2, rf->rf2); - rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt73usb_rf_write(rt2x00dev, 4, rf->rf4); - - rt73usb_rf_write(rt2x00dev, 1, rf->rf1); - rt73usb_rf_write(rt2x00dev, 2, rf->rf2); - rt73usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004); - rt73usb_rf_write(rt2x00dev, 4, rf->rf4); - - rt73usb_rf_write(rt2x00dev, 1, rf->rf1); - rt73usb_rf_write(rt2x00dev, 2, rf->rf2); - rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); - rt73usb_rf_write(rt2x00dev, 4, rf->rf4); - - udelay(10); -} - -static void rt73usb_config_txpower(struct rt2x00_dev *rt2x00dev, - const int txpower) -{ - struct rf_channel rf; - - rt2x00_rf_read(rt2x00dev, 1, &rf.rf1); - rt2x00_rf_read(rt2x00dev, 2, &rf.rf2); - rt2x00_rf_read(rt2x00dev, 3, &rf.rf3); - rt2x00_rf_read(rt2x00dev, 4, &rf.rf4); - - rt73usb_config_channel(rt2x00dev, &rf, txpower); -} - -static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev, - const int antenna_tx, - const int antenna_rx) -{ - u8 r3; - u8 r4; - u8 r77; - - rt73usb_bbp_read(rt2x00dev, 3, &r3); - rt73usb_bbp_read(rt2x00dev, 4, &r4); - rt73usb_bbp_read(rt2x00dev, 77, &r77); - - rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0); - - switch (antenna_rx) { - case ANTENNA_SW_DIVERSITY: - case ANTENNA_HW_DIVERSITY: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); - rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, - !!(rt2x00dev->curr_hwmode != HWMODE_A)); - break; - case ANTENNA_A: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); - rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - - if (rt2x00dev->curr_hwmode == HWMODE_A) - rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); - else - rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); - break; - case ANTENNA_B: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); - rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0); - - if (rt2x00dev->curr_hwmode == HWMODE_A) - rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); - else - rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); - break; - } - - rt73usb_bbp_write(rt2x00dev, 77, r77); - rt73usb_bbp_write(rt2x00dev, 3, r3); - rt73usb_bbp_write(rt2x00dev, 4, r4); -} - -static void rt73usb_config_antenna_2x(struct rt2x00_dev *rt2x00dev, - const int antenna_tx, - const int antenna_rx) -{ - u8 r3; - u8 r4; - u8 r77; - - rt73usb_bbp_read(rt2x00dev, 3, &r3); - rt73usb_bbp_read(rt2x00dev, 4, &r4); - rt73usb_bbp_read(rt2x00dev, 77, &r77); - - rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0); - rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, - !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags)); - - switch (antenna_rx) { - case ANTENNA_SW_DIVERSITY: - case ANTENNA_HW_DIVERSITY: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 2); - break; - case ANTENNA_A: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); - rt2x00_set_field8(&r77, BBP_R77_PAIR, 3); - break; - case ANTENNA_B: - rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA, 1); - rt2x00_set_field8(&r77, BBP_R77_PAIR, 0); - break; - } - - rt73usb_bbp_write(rt2x00dev, 77, r77); - rt73usb_bbp_write(rt2x00dev, 3, r3); - rt73usb_bbp_write(rt2x00dev, 4, r4); -} - -struct antenna_sel { - u8 word; - /* - * value[0] -> non-LNA - * value[1] -> LNA - */ - u8 value[2]; -}; - -static const struct antenna_sel antenna_sel_a[] = { - { 96, { 0x58, 0x78 } }, - { 104, { 0x38, 0x48 } }, - { 75, { 0xfe, 0x80 } }, - { 86, { 0xfe, 0x80 } }, - { 88, { 0xfe, 0x80 } }, - { 35, { 0x60, 0x60 } }, - { 97, { 0x58, 0x58 } }, - { 98, { 0x58, 0x58 } }, -}; - -static const struct antenna_sel antenna_sel_bg[] = { - { 96, { 0x48, 0x68 } }, - { 104, { 0x2c, 0x3c } }, - { 75, { 0xfe, 0x80 } }, - { 86, { 0xfe, 0x80 } }, - { 88, { 0xfe, 0x80 } }, - { 35, { 0x50, 0x50 } }, - { 97, { 0x48, 0x48 } }, - { 98, { 0x48, 0x48 } }, -}; - -static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev, - const int antenna_tx, const int antenna_rx) -{ - const struct antenna_sel *sel; - unsigned int lna; - unsigned int i; - u32 reg; - - rt73usb_register_read(rt2x00dev, PHY_CSR0, ®); - - if (rt2x00dev->curr_hwmode == HWMODE_A) { - sel = antenna_sel_a; - lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); - - rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, 0); - rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, 1); - } else { - sel = antenna_sel_bg; - lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); - - rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG, 1); - rt2x00_set_field32(®, PHY_CSR0_PA_PE_A, 0); - } - - for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++) - rt73usb_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]); - - rt73usb_register_write(rt2x00dev, PHY_CSR0, reg); - - if (rt2x00_rf(&rt2x00dev->chip, RF5226) || - rt2x00_rf(&rt2x00dev->chip, RF5225)) - rt73usb_config_antenna_5x(rt2x00dev, antenna_tx, antenna_rx); - else if (rt2x00_rf(&rt2x00dev->chip, RF2528) || - rt2x00_rf(&rt2x00dev->chip, RF2527)) - rt73usb_config_antenna_2x(rt2x00dev, antenna_tx, antenna_rx); -} - -static void rt73usb_config_duration(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u32 reg; - - rt73usb_register_read(rt2x00dev, MAC_CSR9, ®); - rt2x00_set_field32(®, MAC_CSR9_SLOT_TIME, libconf->slot_time); - rt73usb_register_write(rt2x00dev, MAC_CSR9, reg); - - rt73usb_register_read(rt2x00dev, MAC_CSR8, ®); - rt2x00_set_field32(®, MAC_CSR8_SIFS, libconf->sifs); - rt2x00_set_field32(®, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3); - rt2x00_set_field32(®, MAC_CSR8_EIFS, libconf->eifs); - rt73usb_register_write(rt2x00dev, MAC_CSR8, reg); - - rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER); - rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); - - rt73usb_register_read(rt2x00dev, TXRX_CSR4, ®); - rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_ENABLE, 1); - rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg); - - rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, - libconf->conf->beacon_int * 16); - rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); -} - -static void rt73usb_config(struct rt2x00_dev *rt2x00dev, - const unsigned int flags, - struct rt2x00lib_conf *libconf) -{ - if (flags & CONFIG_UPDATE_PHYMODE) - rt73usb_config_phymode(rt2x00dev, libconf->basic_rates); - if (flags & CONFIG_UPDATE_CHANNEL) - rt73usb_config_channel(rt2x00dev, &libconf->rf, - libconf->conf->power_level); - if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL)) - rt73usb_config_txpower(rt2x00dev, libconf->conf->power_level); - if (flags & CONFIG_UPDATE_ANTENNA) - rt73usb_config_antenna(rt2x00dev, libconf->conf->antenna_sel_tx, - libconf->conf->antenna_sel_rx); - if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT)) - rt73usb_config_duration(rt2x00dev, libconf); -} - -/* - * LED functions. - */ -static void rt73usb_enable_led(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt73usb_register_read(rt2x00dev, MAC_CSR14, ®); - rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, 70); - rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, 30); - rt73usb_register_write(rt2x00dev, MAC_CSR14, reg); - - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 1); - if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) - rt2x00_set_field16(&rt2x00dev->led_reg, - MCU_LEDCS_LINK_A_STATUS, 1); - else - rt2x00_set_field16(&rt2x00dev->led_reg, - MCU_LEDCS_LINK_BG_STATUS, 1); - - rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, 0x0000, - rt2x00dev->led_reg, REGISTER_TIMEOUT); -} - -static void rt73usb_disable_led(struct rt2x00_dev *rt2x00dev) -{ - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_RADIO_STATUS, 0); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_BG_STATUS, 0); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LINK_A_STATUS, 0); - - rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, 0x0000, - rt2x00dev->led_reg, REGISTER_TIMEOUT); -} - -static void rt73usb_activity_led(struct rt2x00_dev *rt2x00dev, int rssi) -{ - u32 led; - - if (rt2x00dev->led_mode != LED_MODE_SIGNAL_STRENGTH) - return; - - /* - * Led handling requires a positive value for the rssi, - * to do that correctly we need to add the correction. - */ - rssi += rt2x00dev->rssi_offset; - - if (rssi <= 30) - led = 0; - else if (rssi <= 39) - led = 1; - else if (rssi <= 49) - led = 2; - else if (rssi <= 53) - led = 3; - else if (rssi <= 63) - led = 4; - else - led = 5; - - rt2x00usb_vendor_request_sw(rt2x00dev, USB_LED_CONTROL, led, - rt2x00dev->led_reg, REGISTER_TIMEOUT); -} - -/* - * Link tuning - */ -static void rt73usb_link_stats(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - /* - * Update FCS error count from register. - */ - rt73usb_register_read(rt2x00dev, STA_CSR0, ®); - rt2x00dev->link.rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR); - - /* - * Update False CCA count from register. - */ - rt73usb_register_read(rt2x00dev, STA_CSR1, ®); - reg = rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR); - rt2x00dev->link.false_cca = - rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR); -} - -static void rt73usb_reset_tuner(struct rt2x00_dev *rt2x00dev) -{ - rt73usb_bbp_write(rt2x00dev, 17, 0x20); - rt2x00dev->link.vgc_level = 0x20; -} - -static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev) -{ - int rssi = rt2x00_get_link_rssi(&rt2x00dev->link); - u8 r17; - u8 up_bound; - u8 low_bound; - - /* - * Update Led strength - */ - rt73usb_activity_led(rt2x00dev, rssi); - - rt73usb_bbp_read(rt2x00dev, 17, &r17); - - /* - * Determine r17 bounds. - */ - if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) { - low_bound = 0x28; - up_bound = 0x48; - - if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) { - low_bound += 0x10; - up_bound += 0x10; - } - } else { - if (rssi > -82) { - low_bound = 0x1c; - up_bound = 0x40; - } else if (rssi > -84) { - low_bound = 0x1c; - up_bound = 0x20; - } else { - low_bound = 0x1c; - up_bound = 0x1c; - } - - if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) { - low_bound += 0x14; - up_bound += 0x10; - } - } - - /* - * Special big-R17 for very short distance - */ - if (rssi > -35) { - if (r17 != 0x60) - rt73usb_bbp_write(rt2x00dev, 17, 0x60); - return; - } - - /* - * Special big-R17 for short distance - */ - if (rssi >= -58) { - if (r17 != up_bound) - rt73usb_bbp_write(rt2x00dev, 17, up_bound); - return; - } - - /* - * Special big-R17 for middle-short distance - */ - if (rssi >= -66) { - low_bound += 0x10; - if (r17 != low_bound) - rt73usb_bbp_write(rt2x00dev, 17, low_bound); - return; - } - - /* - * Special mid-R17 for middle distance - */ - if (rssi >= -74) { - if (r17 != (low_bound + 0x10)) - rt73usb_bbp_write(rt2x00dev, 17, low_bound + 0x08); - return; - } - - /* - * Special case: Change up_bound based on the rssi. - * Lower up_bound when rssi is weaker then -74 dBm. - */ - up_bound -= 2 * (-74 - rssi); - if (low_bound > up_bound) - up_bound = low_bound; - - if (r17 > up_bound) { - rt73usb_bbp_write(rt2x00dev, 17, up_bound); - return; - } - - /* - * r17 does not yet exceed upper limit, continue and base - * the r17 tuning on the false CCA count. - */ - if (rt2x00dev->link.false_cca > 512 && r17 < up_bound) { - r17 += 4; - if (r17 > up_bound) - r17 = up_bound; - rt73usb_bbp_write(rt2x00dev, 17, r17); - } else if (rt2x00dev->link.false_cca < 100 && r17 > low_bound) { - r17 -= 4; - if (r17 < low_bound) - r17 = low_bound; - rt73usb_bbp_write(rt2x00dev, 17, r17); - } -} - -/* - * Firmware name function. - */ -static char *rt73usb_get_firmware_name(struct rt2x00_dev *rt2x00dev) -{ - return FIRMWARE_RT2571; -} - -/* - * Initialization functions. - */ -static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, void *data, - const size_t len) -{ - unsigned int i; - int status; - u32 reg; - char *ptr = data; - char *cache; - int buflen; - int timeout; - - /* - * Wait for stable hardware. - */ - for (i = 0; i < 100; i++) { - rt73usb_register_read(rt2x00dev, MAC_CSR0, ®); - if (reg) - break; - msleep(1); - } - - if (!reg) { - ERROR(rt2x00dev, "Unstable hardware.\n"); - return -EBUSY; - } - - /* - * Write firmware to device. - * We setup a seperate cache for this action, - * since we are going to write larger chunks of data - * then normally used cache size. - */ - cache = kmalloc(CSR_CACHE_SIZE_FIRMWARE, GFP_KERNEL); - if (!cache) { - ERROR(rt2x00dev, "Failed to allocate firmware cache.\n"); - return -ENOMEM; - } - - for (i = 0; i < len; i += CSR_CACHE_SIZE_FIRMWARE) { - buflen = min_t(int, len - i, CSR_CACHE_SIZE_FIRMWARE); - timeout = REGISTER_TIMEOUT * (buflen / sizeof(u32)); - - memcpy(cache, ptr, buflen); - - rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, - FIRMWARE_IMAGE_BASE + i, 0x0000, - cache, buflen, timeout); - - ptr += buflen; - } - - kfree(cache); - - /* - * Send firmware request to device to load firmware, - * we need to specify a long timeout time. - */ - status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, - 0x0000, USB_MODE_FIRMWARE, - REGISTER_TIMEOUT_FIRMWARE); - if (status < 0) { - ERROR(rt2x00dev, "Failed to write Firmware to device.\n"); - return status; - } - - rt73usb_disable_led(rt2x00dev); - - return 0; -} - -static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_AUTO_TX_SEQ, 1); - rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, 0); - rt2x00_set_field32(®, TXRX_CSR0_TX_WITHOUT_WAITING, 0); - rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); - - rt73usb_register_read(rt2x00dev, TXRX_CSR1, ®); - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */ - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID1, 30); /* Rssi */ - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID1_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID2, 42); /* OFDM Rate */ - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID2_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3, 30); /* Rssi */ - rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3_VALID, 1); - rt73usb_register_write(rt2x00dev, TXRX_CSR1, reg); - - /* - * CCK TXD BBP registers - */ - rt73usb_register_read(rt2x00dev, TXRX_CSR2, ®); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0, 13); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID1, 12); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID1_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID2, 11); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID2_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3, 10); - rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3_VALID, 1); - rt73usb_register_write(rt2x00dev, TXRX_CSR2, reg); - - /* - * OFDM TXD BBP registers - */ - rt73usb_register_read(rt2x00dev, TXRX_CSR3, ®); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0, 7); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1, 6); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1_VALID, 1); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2, 5); - rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2_VALID, 1); - rt73usb_register_write(rt2x00dev, TXRX_CSR3, reg); - - rt73usb_register_read(rt2x00dev, TXRX_CSR7, ®); - rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_6MBS, 59); - rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_9MBS, 53); - rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_12MBS, 49); - rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_18MBS, 46); - rt73usb_register_write(rt2x00dev, TXRX_CSR7, reg); - - rt73usb_register_read(rt2x00dev, TXRX_CSR8, ®); - rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_24MBS, 44); - rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_36MBS, 42); - rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_48MBS, 42); - rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_54MBS, 42); - rt73usb_register_write(rt2x00dev, TXRX_CSR8, reg); - - rt73usb_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f); - - rt73usb_register_read(rt2x00dev, MAC_CSR6, ®); - rt2x00_set_field32(®, MAC_CSR6_MAX_FRAME_UNIT, 0xfff); - rt73usb_register_write(rt2x00dev, MAC_CSR6, reg); - - rt73usb_register_write(rt2x00dev, MAC_CSR10, 0x00000718); - - if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) - return -EBUSY; - - rt73usb_register_write(rt2x00dev, MAC_CSR13, 0x00007f00); - - /* - * Invalidate all Shared Keys (SEC_CSR0), - * and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5) - */ - rt73usb_register_write(rt2x00dev, SEC_CSR0, 0x00000000); - rt73usb_register_write(rt2x00dev, SEC_CSR1, 0x00000000); - rt73usb_register_write(rt2x00dev, SEC_CSR5, 0x00000000); - - reg = 0x000023b0; - if (rt2x00_rf(&rt2x00dev->chip, RF5225) || - rt2x00_rf(&rt2x00dev->chip, RF2527)) - rt2x00_set_field32(®, PHY_CSR1_RF_RPI, 1); - rt73usb_register_write(rt2x00dev, PHY_CSR1, reg); - - rt73usb_register_write(rt2x00dev, PHY_CSR5, 0x00040a06); - rt73usb_register_write(rt2x00dev, PHY_CSR6, 0x00080606); - rt73usb_register_write(rt2x00dev, PHY_CSR7, 0x00000408); - - rt73usb_register_read(rt2x00dev, AC_TXOP_CSR0, ®); - rt2x00_set_field32(®, AC_TXOP_CSR0_AC0_TX_OP, 0); - rt2x00_set_field32(®, AC_TXOP_CSR0_AC1_TX_OP, 0); - rt73usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg); - - rt73usb_register_read(rt2x00dev, AC_TXOP_CSR1, ®); - rt2x00_set_field32(®, AC_TXOP_CSR1_AC2_TX_OP, 192); - rt2x00_set_field32(®, AC_TXOP_CSR1_AC3_TX_OP, 48); - rt73usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg); - - rt73usb_register_read(rt2x00dev, MAC_CSR9, ®); - rt2x00_set_field32(®, MAC_CSR9_CW_SELECT, 0); - rt73usb_register_write(rt2x00dev, MAC_CSR9, reg); - - /* - * We must clear the error counters. - * These registers are cleared on read, - * so we may pass a useless variable to store the value. - */ - rt73usb_register_read(rt2x00dev, STA_CSR0, ®); - rt73usb_register_read(rt2x00dev, STA_CSR1, ®); - rt73usb_register_read(rt2x00dev, STA_CSR2, ®); - - /* - * Reset MAC and BBP registers. - */ - rt73usb_register_read(rt2x00dev, MAC_CSR1, ®); - rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 1); - rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 1); - rt73usb_register_write(rt2x00dev, MAC_CSR1, reg); - - rt73usb_register_read(rt2x00dev, MAC_CSR1, ®); - rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 0); - rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 0); - rt73usb_register_write(rt2x00dev, MAC_CSR1, reg); - - rt73usb_register_read(rt2x00dev, MAC_CSR1, ®); - rt2x00_set_field32(®, MAC_CSR1_HOST_READY, 1); - rt73usb_register_write(rt2x00dev, MAC_CSR1, reg); - - return 0; -} - -static int rt73usb_init_bbp(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u16 eeprom; - u8 reg_id; - u8 value; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt73usb_bbp_read(rt2x00dev, 0, &value); - if ((value != 0xff) && (value != 0x00)) - goto continue_csr_init; - NOTICE(rt2x00dev, "Waiting for BBP register.\n"); - udelay(REGISTER_BUSY_DELAY); - } - - ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); - return -EACCES; - -continue_csr_init: - rt73usb_bbp_write(rt2x00dev, 3, 0x80); - rt73usb_bbp_write(rt2x00dev, 15, 0x30); - rt73usb_bbp_write(rt2x00dev, 21, 0xc8); - rt73usb_bbp_write(rt2x00dev, 22, 0x38); - rt73usb_bbp_write(rt2x00dev, 23, 0x06); - rt73usb_bbp_write(rt2x00dev, 24, 0xfe); - rt73usb_bbp_write(rt2x00dev, 25, 0x0a); - rt73usb_bbp_write(rt2x00dev, 26, 0x0d); - rt73usb_bbp_write(rt2x00dev, 32, 0x0b); - rt73usb_bbp_write(rt2x00dev, 34, 0x12); - rt73usb_bbp_write(rt2x00dev, 37, 0x07); - rt73usb_bbp_write(rt2x00dev, 39, 0xf8); - rt73usb_bbp_write(rt2x00dev, 41, 0x60); - rt73usb_bbp_write(rt2x00dev, 53, 0x10); - rt73usb_bbp_write(rt2x00dev, 54, 0x18); - rt73usb_bbp_write(rt2x00dev, 60, 0x10); - rt73usb_bbp_write(rt2x00dev, 61, 0x04); - rt73usb_bbp_write(rt2x00dev, 62, 0x04); - rt73usb_bbp_write(rt2x00dev, 75, 0xfe); - rt73usb_bbp_write(rt2x00dev, 86, 0xfe); - rt73usb_bbp_write(rt2x00dev, 88, 0xfe); - rt73usb_bbp_write(rt2x00dev, 90, 0x0f); - rt73usb_bbp_write(rt2x00dev, 99, 0x00); - rt73usb_bbp_write(rt2x00dev, 102, 0x16); - rt73usb_bbp_write(rt2x00dev, 107, 0x04); - - DEBUG(rt2x00dev, "Start initialization from EEPROM...\n"); - for (i = 0; i < EEPROM_BBP_SIZE; i++) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); - - if (eeprom != 0xffff && eeprom != 0x0000) { - reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); - value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); - DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n", - reg_id, value); - rt73usb_bbp_write(rt2x00dev, reg_id, value); - } - } - DEBUG(rt2x00dev, "...End initialization from EEPROM.\n"); - - return 0; -} - -/* - * Device state switch handlers. - */ -static void rt73usb_toggle_rx(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - u32 reg; - - rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, - state == STATE_RADIO_RX_OFF); - rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); -} - -static int rt73usb_enable_radio(struct rt2x00_dev *rt2x00dev) -{ - /* - * Initialize all registers. - */ - if (rt73usb_init_registers(rt2x00dev) || - rt73usb_init_bbp(rt2x00dev)) { - ERROR(rt2x00dev, "Register initialization failed.\n"); - return -EIO; - } - - rt2x00usb_enable_radio(rt2x00dev); - - /* - * Enable LED - */ - rt73usb_enable_led(rt2x00dev); - - return 0; -} - -static void rt73usb_disable_radio(struct rt2x00_dev *rt2x00dev) -{ - /* - * Disable LED - */ - rt73usb_disable_led(rt2x00dev); - - rt73usb_register_write(rt2x00dev, MAC_CSR10, 0x00001818); - - /* - * Disable synchronisation. - */ - rt73usb_register_write(rt2x00dev, TXRX_CSR9, 0); - - rt2x00usb_disable_radio(rt2x00dev); -} - -static int rt73usb_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) -{ - u32 reg; - unsigned int i; - char put_to_sleep; - char current_state; - - put_to_sleep = (state != STATE_AWAKE); - - rt73usb_register_read(rt2x00dev, MAC_CSR12, ®); - rt2x00_set_field32(®, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep); - rt2x00_set_field32(®, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep); - rt73usb_register_write(rt2x00dev, MAC_CSR12, reg); - - /* - * Device is not guaranteed to be in the requested state yet. - * We must wait until the register indicates that the - * device has entered the correct state. - */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt73usb_register_read(rt2x00dev, MAC_CSR12, ®); - current_state = - rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE); - if (current_state == !put_to_sleep) - return 0; - msleep(10); - } - - NOTICE(rt2x00dev, "Device failed to enter state %d, " - "current device state %d.\n", !put_to_sleep, current_state); - - return -EBUSY; -} - -static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - int retval = 0; - - switch (state) { - case STATE_RADIO_ON: - retval = rt73usb_enable_radio(rt2x00dev); - break; - case STATE_RADIO_OFF: - rt73usb_disable_radio(rt2x00dev); - break; - case STATE_RADIO_RX_ON: - case STATE_RADIO_RX_OFF: - rt73usb_toggle_rx(rt2x00dev, state); - break; - case STATE_DEEP_SLEEP: - case STATE_SLEEP: - case STATE_STANDBY: - case STATE_AWAKE: - retval = rt73usb_set_state(rt2x00dev, state); - break; - default: - retval = -ENOTSUPP; - break; - } - - return retval; -} - -/* - * TX descriptor initialization - */ -static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct data_desc *txd, - struct txdata_entry_desc *desc, - struct ieee80211_hdr *ieee80211hdr, - unsigned int length, - struct ieee80211_tx_control *control) -{ - u32 word; - - /* - * Start writing the descriptor words. - */ - rt2x00_desc_read(txd, 1, &word); - rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, desc->queue); - rt2x00_set_field32(&word, TXD_W1_AIFSN, desc->aifs); - rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min); - rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max); - rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1); - rt2x00_desc_write(txd, 1, word); - - rt2x00_desc_read(txd, 2, &word); - rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal); - rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service); - rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low); - rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high); - rt2x00_desc_write(txd, 2, word); - - rt2x00_desc_read(txd, 5, &word); - rt2x00_set_field32(&word, TXD_W5_TX_POWER, - TXPOWER_TO_DEV(control->power_level)); - rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1); - rt2x00_desc_write(txd, 5, word); - - rt2x00_desc_read(txd, 0, &word); - rt2x00_set_field32(&word, TXD_W0_BURST, - test_bit(ENTRY_TXD_BURST, &desc->flags)); - rt2x00_set_field32(&word, TXD_W0_VALID, 1); - rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, - test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags)); - rt2x00_set_field32(&word, TXD_W0_ACK, - !(control->flags & IEEE80211_TXCTL_NO_ACK)); - rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, - test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags)); - rt2x00_set_field32(&word, TXD_W0_OFDM, - test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags)); - rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs); - rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, - !!(control->flags & - IEEE80211_TXCTL_LONG_RETRY_LIMIT)); - rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0); - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, length); - rt2x00_set_field32(&word, TXD_W0_BURST2, - test_bit(ENTRY_TXD_BURST, &desc->flags)); - rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); - rt2x00_desc_write(txd, 0, word); -} - -static int rt73usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb) -{ - int length; - - /* - * The length _must_ be a multiple of 4, - * but it must _not_ be a multiple of the USB packet size. - */ - length = roundup(skb->len, 4); - length += (4 * !(length % rt2x00dev->usb_maxpacket)); - - return length; -} - -/* - * TX data initialization - */ -static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - unsigned int queue) -{ - u32 reg; - - if (queue != IEEE80211_TX_QUEUE_BEACON) - return; - - /* - * For Wi-Fi faily generated beacons between participating stations. - * Set TBTT phase adaptive adjustment step to 8us (default 16us) - */ - rt73usb_register_write(rt2x00dev, TXRX_CSR10, 0x00001008); - - rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); - if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) { - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1); - rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); - } -} - -/* - * RX control handlers - */ -static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) -{ - u16 eeprom; - u8 offset; - u8 lna; - - lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA); - switch (lna) { - case 3: - offset = 90; - break; - case 2: - offset = 74; - break; - case 1: - offset = 64; - break; - default: - return 0; - } - - if (rt2x00dev->rx_status.phymode == MODE_IEEE80211A) { - if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) { - if (lna == 3 || lna == 2) - offset += 10; - } else { - if (lna == 3) - offset += 6; - else if (lna == 2) - offset += 8; - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom); - offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1); - } else { - if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) - offset += 14; - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom); - offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1); - } - - return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset; -} - -static void rt73usb_fill_rxdone(struct data_entry *entry, - struct rxdata_entry_desc *desc) -{ - struct data_desc *rxd = (struct data_desc *)entry->skb->data; - u32 word0; - u32 word1; - - rt2x00_desc_read(rxd, 0, &word0); - rt2x00_desc_read(rxd, 1, &word1); - - desc->flags = 0; - if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) - desc->flags |= RX_FLAG_FAILED_FCS_CRC; - - /* - * Obtain the status about this packet. - */ - desc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); - desc->rssi = rt73usb_agc_to_rssi(entry->ring->rt2x00dev, word1); - desc->ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); - desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); - - /* - * Pull the skb to clear the descriptor area. - */ - skb_pull(entry->skb, entry->ring->desc_size); - - return; -} - -/* - * Device probe functions. - */ -static int rt73usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) -{ - u16 word; - u8 *mac; - s8 value; - - rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE); - - /* - * Start validation of the data that has been read. - */ - mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); - if (!is_valid_ether_addr(mac)) { - DECLARE_MAC_BUF(macbuf); - - random_ether_addr(mac); - EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac)); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2); - rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, 2); - rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, 2); - rt2x00_set_field16(&word, EEPROM_ANTENNA_FRAME_TYPE, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF5226); - rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); - EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); - EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_LED_POLARITY_RDY_G, 0); - rt2x00_set_field16(&word, EEPROM_LED_POLARITY_RDY_A, 0); - rt2x00_set_field16(&word, EEPROM_LED_POLARITY_ACT, 0); - rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_0, 0); - rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_1, 0); - rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_2, 0); - rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_3, 0); - rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_4, 0); - rt2x00_set_field16(&word, EEPROM_LED_LED_MODE, - LED_MODE_DEFAULT); - rt2x00_eeprom_write(rt2x00dev, EEPROM_LED, word); - EEPROM(rt2x00dev, "Led: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0); - rt2x00_set_field16(&word, EEPROM_FREQ_SEQ, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word); - EEPROM(rt2x00dev, "Freq: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0); - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word); - EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word); - } else { - value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_1); - if (value < -10 || value > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0); - value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_2); - if (value < -10 || value > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0); - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word); - EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word); - } else { - value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1); - if (value < -10 || value > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0); - value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_2); - if (value < -10 || value > 10) - rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word); - } - - return 0; -} - -static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - u16 value; - u16 eeprom; - - /* - * Read EEPROM word for configuration. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); - - /* - * Identify RF chipset. - */ - value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); - rt73usb_register_read(rt2x00dev, MAC_CSR0, ®); - rt2x00_set_chip(rt2x00dev, RT2571, value, reg); - - if (!rt2x00_check_rev(&rt2x00dev->chip, 0x25730)) { - ERROR(rt2x00dev, "Invalid RT chipset detected.\n"); - return -ENODEV; - } - - if (!rt2x00_rf(&rt2x00dev->chip, RF5226) && - !rt2x00_rf(&rt2x00dev->chip, RF2528) && - !rt2x00_rf(&rt2x00dev->chip, RF5225) && - !rt2x00_rf(&rt2x00dev->chip, RF2527)) { - ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); - return -ENODEV; - } - - /* - * Identify default antenna configuration. - */ - rt2x00dev->hw->conf.antenna_sel_tx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT); - rt2x00dev->hw->conf.antenna_sel_rx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT); - - /* - * Read the Frame type. - */ - if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE)) - __set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags); - - /* - * Read frequency offset. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom); - rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET); - - /* - * Read external LNA informations. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); - - if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA)) { - __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags); - __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags); - } - - /* - * Store led settings, for correct led behaviour. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom); - - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_LED_MODE, - rt2x00dev->led_mode); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_0, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_GPIO_0)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_1, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_GPIO_1)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_2, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_GPIO_2)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_3, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_GPIO_3)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_GPIO_4, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_GPIO_4)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_ACT, - rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_BG, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_RDY_G)); - rt2x00_set_field16(&rt2x00dev->led_reg, MCU_LEDCS_POLARITY_READY_A, - rt2x00_get_field16(eeprom, - EEPROM_LED_POLARITY_RDY_A)); - - return 0; -} - -/* - * RF value list for RF2528 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2528[] = { - { 1, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b }, - { 2, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f }, - { 3, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b }, - { 4, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f }, - { 5, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b }, - { 6, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f }, - { 7, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b }, - { 8, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f }, - { 9, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b }, - { 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f }, - { 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b }, - { 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f }, - { 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b }, - { 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 }, -}; - -/* - * RF value list for RF5226 - * Supports: 2.4 GHz & 5.2 GHz - */ -static const struct rf_channel rf_vals_5226[] = { - { 1, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b }, - { 2, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f }, - { 3, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b }, - { 4, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f }, - { 5, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b }, - { 6, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f }, - { 7, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b }, - { 8, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f }, - { 9, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b }, - { 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f }, - { 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b }, - { 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f }, - { 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b }, - { 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 }, - - /* 802.11 UNI / HyperLan 2 */ - { 36, 0x00002c0c, 0x0000099a, 0x00098255, 0x000fea23 }, - { 40, 0x00002c0c, 0x000009a2, 0x00098255, 0x000fea03 }, - { 44, 0x00002c0c, 0x000009a6, 0x00098255, 0x000fea0b }, - { 48, 0x00002c0c, 0x000009aa, 0x00098255, 0x000fea13 }, - { 52, 0x00002c0c, 0x000009ae, 0x00098255, 0x000fea1b }, - { 56, 0x00002c0c, 0x000009b2, 0x00098255, 0x000fea23 }, - { 60, 0x00002c0c, 0x000009ba, 0x00098255, 0x000fea03 }, - { 64, 0x00002c0c, 0x000009be, 0x00098255, 0x000fea0b }, - - /* 802.11 HyperLan 2 */ - { 100, 0x00002c0c, 0x00000a2a, 0x000b8255, 0x000fea03 }, - { 104, 0x00002c0c, 0x00000a2e, 0x000b8255, 0x000fea0b }, - { 108, 0x00002c0c, 0x00000a32, 0x000b8255, 0x000fea13 }, - { 112, 0x00002c0c, 0x00000a36, 0x000b8255, 0x000fea1b }, - { 116, 0x00002c0c, 0x00000a3a, 0x000b8255, 0x000fea23 }, - { 120, 0x00002c0c, 0x00000a82, 0x000b8255, 0x000fea03 }, - { 124, 0x00002c0c, 0x00000a86, 0x000b8255, 0x000fea0b }, - { 128, 0x00002c0c, 0x00000a8a, 0x000b8255, 0x000fea13 }, - { 132, 0x00002c0c, 0x00000a8e, 0x000b8255, 0x000fea1b }, - { 136, 0x00002c0c, 0x00000a92, 0x000b8255, 0x000fea23 }, - - /* 802.11 UNII */ - { 140, 0x00002c0c, 0x00000a9a, 0x000b8255, 0x000fea03 }, - { 149, 0x00002c0c, 0x00000aa2, 0x000b8255, 0x000fea1f }, - { 153, 0x00002c0c, 0x00000aa6, 0x000b8255, 0x000fea27 }, - { 157, 0x00002c0c, 0x00000aae, 0x000b8255, 0x000fea07 }, - { 161, 0x00002c0c, 0x00000ab2, 0x000b8255, 0x000fea0f }, - { 165, 0x00002c0c, 0x00000ab6, 0x000b8255, 0x000fea17 }, - - /* MMAC(Japan)J52 ch 34,38,42,46 */ - { 34, 0x00002c0c, 0x0008099a, 0x000da255, 0x000d3a0b }, - { 38, 0x00002c0c, 0x0008099e, 0x000da255, 0x000d3a13 }, - { 42, 0x00002c0c, 0x000809a2, 0x000da255, 0x000d3a1b }, - { 46, 0x00002c0c, 0x000809a6, 0x000da255, 0x000d3a23 }, -}; - -/* - * RF value list for RF5225 & RF2527 - * Supports: 2.4 GHz & 5.2 GHz - */ -static const struct rf_channel rf_vals_5225_2527[] = { - { 1, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b }, - { 2, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f }, - { 3, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b }, - { 4, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f }, - { 5, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b }, - { 6, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f }, - { 7, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b }, - { 8, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f }, - { 9, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b }, - { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f }, - { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b }, - { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f }, - { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b }, - { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 }, - - /* 802.11 UNI / HyperLan 2 */ - { 36, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa23 }, - { 40, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa03 }, - { 44, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa0b }, - { 48, 0x00002ccc, 0x000049aa, 0x0009be55, 0x000ffa13 }, - { 52, 0x00002ccc, 0x000049ae, 0x0009ae55, 0x000ffa1b }, - { 56, 0x00002ccc, 0x000049b2, 0x0009ae55, 0x000ffa23 }, - { 60, 0x00002ccc, 0x000049ba, 0x0009ae55, 0x000ffa03 }, - { 64, 0x00002ccc, 0x000049be, 0x0009ae55, 0x000ffa0b }, - - /* 802.11 HyperLan 2 */ - { 100, 0x00002ccc, 0x00004a2a, 0x000bae55, 0x000ffa03 }, - { 104, 0x00002ccc, 0x00004a2e, 0x000bae55, 0x000ffa0b }, - { 108, 0x00002ccc, 0x00004a32, 0x000bae55, 0x000ffa13 }, - { 112, 0x00002ccc, 0x00004a36, 0x000bae55, 0x000ffa1b }, - { 116, 0x00002ccc, 0x00004a3a, 0x000bbe55, 0x000ffa23 }, - { 120, 0x00002ccc, 0x00004a82, 0x000bbe55, 0x000ffa03 }, - { 124, 0x00002ccc, 0x00004a86, 0x000bbe55, 0x000ffa0b }, - { 128, 0x00002ccc, 0x00004a8a, 0x000bbe55, 0x000ffa13 }, - { 132, 0x00002ccc, 0x00004a8e, 0x000bbe55, 0x000ffa1b }, - { 136, 0x00002ccc, 0x00004a92, 0x000bbe55, 0x000ffa23 }, - - /* 802.11 UNII */ - { 140, 0x00002ccc, 0x00004a9a, 0x000bbe55, 0x000ffa03 }, - { 149, 0x00002ccc, 0x00004aa2, 0x000bbe55, 0x000ffa1f }, - { 153, 0x00002ccc, 0x00004aa6, 0x000bbe55, 0x000ffa27 }, - { 157, 0x00002ccc, 0x00004aae, 0x000bbe55, 0x000ffa07 }, - { 161, 0x00002ccc, 0x00004ab2, 0x000bbe55, 0x000ffa0f }, - { 165, 0x00002ccc, 0x00004ab6, 0x000bbe55, 0x000ffa17 }, - - /* MMAC(Japan)J52 ch 34,38,42,46 */ - { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa0b }, - { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000ffa13 }, - { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa1b }, - { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa23 }, -}; - - -static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) -{ - struct hw_mode_spec *spec = &rt2x00dev->spec; - u8 *txpower; - unsigned int i; - - /* - * Initialize all hw fields. - */ - rt2x00dev->hw->flags = - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | - IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING; - rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; - rt2x00dev->hw->max_signal = MAX_SIGNAL; - rt2x00dev->hw->max_rssi = MAX_RX_SSI; - rt2x00dev->hw->queues = 5; - - SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev); - SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, - rt2x00_eeprom_addr(rt2x00dev, - EEPROM_MAC_ADDR_0)); - - /* - * Convert tx_power array in eeprom. - */ - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START); - for (i = 0; i < 14; i++) - txpower[i] = TXPOWER_FROM_DEV(txpower[i]); - - /* - * Initialize hw_mode information. - */ - spec->num_modes = 2; - spec->num_rates = 12; - spec->tx_power_a = NULL; - spec->tx_power_bg = txpower; - spec->tx_power_default = DEFAULT_TXPOWER; - - if (rt2x00_rf(&rt2x00dev->chip, RF2528)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528); - spec->channels = rf_vals_bg_2528; - } else if (rt2x00_rf(&rt2x00dev->chip, RF5226)) { - spec->num_channels = ARRAY_SIZE(rf_vals_5226); - spec->channels = rf_vals_5226; - } else if (rt2x00_rf(&rt2x00dev->chip, RF2527)) { - spec->num_channels = 14; - spec->channels = rf_vals_5225_2527; - } else if (rt2x00_rf(&rt2x00dev->chip, RF5225)) { - spec->num_channels = ARRAY_SIZE(rf_vals_5225_2527); - spec->channels = rf_vals_5225_2527; - } - - if (rt2x00_rf(&rt2x00dev->chip, RF5225) || - rt2x00_rf(&rt2x00dev->chip, RF5226)) { - spec->num_modes = 3; - - txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START); - for (i = 0; i < 14; i++) - txpower[i] = TXPOWER_FROM_DEV(txpower[i]); - - spec->tx_power_a = txpower; - } -} - -static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev) -{ - int retval; - - /* - * Allocate eeprom data. - */ - retval = rt73usb_validate_eeprom(rt2x00dev); - if (retval) - return retval; - - retval = rt73usb_init_eeprom(rt2x00dev); - if (retval) - return retval; - - /* - * Initialize hw specifications. - */ - rt73usb_probe_hw_mode(rt2x00dev); - - /* - * This device requires firmware - */ - __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); - - /* - * Set the rssi offset. - */ - rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; - - return 0; -} - -/* - * IEEE80211 stack callback functions. - */ -static void rt73usb_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - int mc_count, - struct dev_addr_list *mc_list) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct interface *intf = &rt2x00dev->interface; - u32 reg; - - /* - * Mask off any flags we are going to ignore from - * the total_flags field. - */ - *total_flags &= - FIF_ALLMULTI | - FIF_FCSFAIL | - FIF_PLCPFAIL | - FIF_CONTROL | - FIF_OTHER_BSS | - FIF_PROMISC_IN_BSS; - - /* - * Apply some rules to the filters: - * - Some filters imply different filters to be set. - * - Some things we can't filter out at all. - * - Some filters are set based on interface type. - */ - if (mc_count) - *total_flags |= FIF_ALLMULTI; - if (*total_flags & FIF_OTHER_BSS || - *total_flags & FIF_PROMISC_IN_BSS) - *total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS; - if (is_interface_type(intf, IEEE80211_IF_TYPE_AP)) - *total_flags |= FIF_PROMISC_IN_BSS; - - /* - * Check if there is any work left for us. - */ - if (intf->filter == *total_flags) - return; - intf->filter = *total_flags; - - /* - * When in atomic context, reschedule and let rt2x00lib - * call this function again. - */ - if (in_atomic()) { - queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->filter_work); - return; - } - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * and broadcast frames will always be accepted since - * there is no filter for it at this time. - */ - rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); - rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC, - !(*total_flags & FIF_FCSFAIL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL, - !(*total_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL, - !(*total_flags & FIF_CONTROL)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS, - !(*total_flags & FIF_PROMISC_IN_BSS)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1); - rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST, - !(*total_flags & FIF_ALLMULTI)); - rt2x00_set_field32(®, TXRX_CSR0_DROP_BROADCAST, 0); - rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS, 1); - rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); -} - -static int rt73usb_set_retry_limit(struct ieee80211_hw *hw, - u32 short_retry, u32 long_retry) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - - rt73usb_register_read(rt2x00dev, TXRX_CSR4, ®); - rt2x00_set_field32(®, TXRX_CSR4_LONG_RETRY_LIMIT, long_retry); - rt2x00_set_field32(®, TXRX_CSR4_SHORT_RETRY_LIMIT, short_retry); - rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg); - - return 0; -} - -#if 0 -/* - * Mac80211 demands get_tsf must be atomic. - * This is not possible for rt73usb since all register access - * functions require sleeping. Untill mac80211 no longer needs - * get_tsf to be atomic, this function should be disabled. - */ -static u64 rt73usb_get_tsf(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u64 tsf; - u32 reg; - - rt73usb_register_read(rt2x00dev, TXRX_CSR13, ®); - tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32; - rt73usb_register_read(rt2x00dev, TXRX_CSR12, ®); - tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER); - - return tsf; -} -#else -#define rt73usb_get_tsf NULL -#endif - -static void rt73usb_reset_tsf(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - - rt73usb_register_write(rt2x00dev, TXRX_CSR12, 0); - rt73usb_register_write(rt2x00dev, TXRX_CSR13, 0); -} - -static int rt73usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *control) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - int timeout; - - /* - * Just in case the ieee80211 doesn't set this, - * but we need this queue set for the descriptor - * initialization. - */ - control->queue = IEEE80211_TX_QUEUE_BEACON; - - /* - * First we create the beacon. - */ - skb_push(skb, TXD_DESC_SIZE); - memset(skb->data, 0, TXD_DESC_SIZE); - - rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data, - (struct ieee80211_hdr *)(skb->data + - TXD_DESC_SIZE), - skb->len - TXD_DESC_SIZE, control); - - /* - * Write entire beacon with descriptor to register, - * and kick the beacon generator. - */ - timeout = REGISTER_TIMEOUT * (skb->len / sizeof(u32)); - rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, - HW_BEACON_BASE0, 0x0000, - skb->data, skb->len, timeout); - rt73usb_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); - - return 0; -} - -static const struct ieee80211_ops rt73usb_mac80211_ops = { - .tx = rt2x00mac_tx, - .start = rt2x00mac_start, - .stop = rt2x00mac_stop, - .add_interface = rt2x00mac_add_interface, - .remove_interface = rt2x00mac_remove_interface, - .config = rt2x00mac_config, - .config_interface = rt2x00mac_config_interface, - .configure_filter = rt73usb_configure_filter, - .get_stats = rt2x00mac_get_stats, - .set_retry_limit = rt73usb_set_retry_limit, - .erp_ie_changed = rt2x00mac_erp_ie_changed, - .conf_tx = rt2x00mac_conf_tx, - .get_tx_stats = rt2x00mac_get_tx_stats, - .get_tsf = rt73usb_get_tsf, - .reset_tsf = rt73usb_reset_tsf, - .beacon_update = rt73usb_beacon_update, -}; - -static const struct rt2x00lib_ops rt73usb_rt2x00_ops = { - .probe_hw = rt73usb_probe_hw, - .get_firmware_name = rt73usb_get_firmware_name, - .load_firmware = rt73usb_load_firmware, - .initialize = rt2x00usb_initialize, - .uninitialize = rt2x00usb_uninitialize, - .set_device_state = rt73usb_set_device_state, - .link_stats = rt73usb_link_stats, - .reset_tuner = rt73usb_reset_tuner, - .link_tuner = rt73usb_link_tuner, - .write_tx_desc = rt73usb_write_tx_desc, - .write_tx_data = rt2x00usb_write_tx_data, - .get_tx_data_len = rt73usb_get_tx_data_len, - .kick_tx_queue = rt73usb_kick_tx_queue, - .fill_rxdone = rt73usb_fill_rxdone, - .config_mac_addr = rt73usb_config_mac_addr, - .config_bssid = rt73usb_config_bssid, - .config_type = rt73usb_config_type, - .config_preamble = rt73usb_config_preamble, - .config = rt73usb_config, -}; - -static const struct rt2x00_ops rt73usb_ops = { - .name = DRV_NAME, - .rxd_size = RXD_DESC_SIZE, - .txd_size = TXD_DESC_SIZE, - .eeprom_size = EEPROM_SIZE, - .rf_size = RF_SIZE, - .lib = &rt73usb_rt2x00_ops, - .hw = &rt73usb_mac80211_ops, -#ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt73usb_rt2x00debug, -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -}; - -/* - * rt73usb module information. - */ -static struct usb_device_id rt73usb_device_table[] = { - /* AboCom */ - { USB_DEVICE(0x07b8, 0xb21d), USB_DEVICE_DATA(&rt73usb_ops) }, - /* Askey */ - { USB_DEVICE(0x1690, 0x0722), USB_DEVICE_DATA(&rt73usb_ops) }, - /* ASUS */ - { USB_DEVICE(0x0b05, 0x1723), USB_DEVICE_DATA(&rt73usb_ops) }, - { USB_DEVICE(0x0b05, 0x1724), USB_DEVICE_DATA(&rt73usb_ops) }, - /* Belkin */ - { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt73usb_ops) }, - { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt73usb_ops) }, - { USB_DEVICE(0x050d, 0x905b), USB_DEVICE_DATA(&rt73usb_ops) }, - { USB_DEVICE(0x050d, 0x905c), USB_DEVICE_DATA(&rt73usb_ops) }, - /* Billionton */ - { USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) }, - /* Buffalo */ - { USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) }, - /* CNet */ - { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) }, - { USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) }, - /* Conceptronic */ - { USB_DEVICE(0x14b2, 0x3c22), USB_DEVICE_DATA(&rt73usb_ops) }, - /* D-Link */ - { USB_DEVICE(0x07d1, 0x3c03), USB_DEVICE_DATA(&rt73usb_ops) }, - { USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) }, - /* Gemtek */ - { USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) }, - /* Gigabyte */ - { USB_DEVICE(0x1044, 0x8008), USB_DEVICE_DATA(&rt73usb_ops) }, - { USB_DEVICE(0x1044, 0x800a), USB_DEVICE_DATA(&rt73usb_ops) }, - /* Huawei-3Com */ - { USB_DEVICE(0x1472, 0x0009), USB_DEVICE_DATA(&rt73usb_ops) }, - /* Hercules */ - { USB_DEVICE(0x06f8, 0xe010), USB_DEVICE_DATA(&rt73usb_ops) }, - { USB_DEVICE(0x06f8, 0xe020), USB_DEVICE_DATA(&rt73usb_ops) }, - /* Linksys */ - { USB_DEVICE(0x13b1, 0x0020), USB_DEVICE_DATA(&rt73usb_ops) }, - { USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops) }, - /* MSI */ - { USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops) }, - { USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops) }, - { USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) }, - { USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) }, - /* Ralink */ - { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) }, - { USB_DEVICE(0x148f, 0x2671), USB_DEVICE_DATA(&rt73usb_ops) }, - /* Qcom */ - { USB_DEVICE(0x18e8, 0x6196), USB_DEVICE_DATA(&rt73usb_ops) }, - { USB_DEVICE(0x18e8, 0x6229), USB_DEVICE_DATA(&rt73usb_ops) }, - { USB_DEVICE(0x18e8, 0x6238), USB_DEVICE_DATA(&rt73usb_ops) }, - /* Senao */ - { USB_DEVICE(0x1740, 0x7100), USB_DEVICE_DATA(&rt73usb_ops) }, - /* Sitecom */ - { USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) }, - { USB_DEVICE(0x0df6, 0x90ac), USB_DEVICE_DATA(&rt73usb_ops) }, - /* Surecom */ - { USB_DEVICE(0x0769, 0x31f3), USB_DEVICE_DATA(&rt73usb_ops) }, - /* Planex */ - { USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) }, - { USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) }, - { 0, } -}; - -MODULE_AUTHOR(DRV_PROJECT); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("Ralink RT73 USB Wireless LAN driver."); -MODULE_SUPPORTED_DEVICE("Ralink RT2571W & RT2671 USB chipset based cards"); -MODULE_DEVICE_TABLE(usb, rt73usb_device_table); -MODULE_FIRMWARE(FIRMWARE_RT2571); -MODULE_LICENSE("GPL"); - -static struct usb_driver rt73usb_driver = { - .name = DRV_NAME, - .id_table = rt73usb_device_table, - .probe = rt2x00usb_probe, - .disconnect = rt2x00usb_disconnect, - .suspend = rt2x00usb_suspend, - .resume = rt2x00usb_resume, -}; - -static int __init rt73usb_init(void) -{ - return usb_register(&rt73usb_driver); -} - -static void __exit rt73usb_exit(void) -{ - usb_deregister(&rt73usb_driver); -} - -module_init(rt73usb_init); -module_exit(rt73usb_exit); diff --git a/package/rt2x00/src/rt73usb.h b/package/rt2x00/src/rt73usb.h deleted file mode 100644 index f0951519f74..00000000000 --- a/package/rt2x00/src/rt73usb.h +++ /dev/null @@ -1,1024 +0,0 @@ -/* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: rt73usb - Abstract: Data structures and registers for the rt73usb module. - Supported chipsets: rt2571W & rt2671. - */ - -#ifndef RT73USB_H -#define RT73USB_H - -/* - * RF chip defines. - */ -#define RF5226 0x0001 -#define RF2528 0x0002 -#define RF5225 0x0003 -#define RF2527 0x0004 - -/* - * Signal information. - * Defaul offset is required for RSSI <-> dBm conversion. - */ -#define MAX_SIGNAL 100 -#define MAX_RX_SSI -1 -#define DEFAULT_RSSI_OFFSET 120 - -/* - * Register layout information. - */ -#define CSR_REG_BASE 0x3000 -#define CSR_REG_SIZE 0x04b0 -#define EEPROM_BASE 0x0000 -#define EEPROM_SIZE 0x0100 -#define BBP_SIZE 0x0080 -#define RF_SIZE 0x0014 - -/* - * USB registers. - */ - -/* - * MCU_LEDCS: LED control for MCU Mailbox. - */ -#define MCU_LEDCS_LED_MODE FIELD16(0x001f) -#define MCU_LEDCS_RADIO_STATUS FIELD16(0x0020) -#define MCU_LEDCS_LINK_BG_STATUS FIELD16(0x0040) -#define MCU_LEDCS_LINK_A_STATUS FIELD16(0x0080) -#define MCU_LEDCS_POLARITY_GPIO_0 FIELD16(0x0100) -#define MCU_LEDCS_POLARITY_GPIO_1 FIELD16(0x0200) -#define MCU_LEDCS_POLARITY_GPIO_2 FIELD16(0x0400) -#define MCU_LEDCS_POLARITY_GPIO_3 FIELD16(0x0800) -#define MCU_LEDCS_POLARITY_GPIO_4 FIELD16(0x1000) -#define MCU_LEDCS_POLARITY_ACT FIELD16(0x2000) -#define MCU_LEDCS_POLARITY_READY_BG FIELD16(0x4000) -#define MCU_LEDCS_POLARITY_READY_A FIELD16(0x8000) - -/* - * 8051 firmware image. - */ -#define FIRMWARE_RT2571 "rt73.bin" -#define FIRMWARE_IMAGE_BASE 0x0800 - -/* - * Security key table memory. - * 16 entries 32-byte for shared key table - * 64 entries 32-byte for pairwise key table - * 64 entries 8-byte for pairwise ta key table - */ -#define SHARED_KEY_TABLE_BASE 0x1000 -#define PAIRWISE_KEY_TABLE_BASE 0x1200 -#define PAIRWISE_TA_TABLE_BASE 0x1a00 - -struct hw_key_entry { - u8 key[16]; - u8 tx_mic[8]; - u8 rx_mic[8]; -} __attribute__ ((packed)); - -struct hw_pairwise_ta_entry { - u8 address[6]; - u8 reserved[2]; -} __attribute__ ((packed)); - -/* - * Since NULL frame won't be that long (256 byte), - * We steal 16 tail bytes to save debugging settings. - */ -#define HW_DEBUG_SETTING_BASE 0x2bf0 - -/* - * On-chip BEACON frame space. - */ -#define HW_BEACON_BASE0 0x2400 -#define HW_BEACON_BASE1 0x2500 -#define HW_BEACON_BASE2 0x2600 -#define HW_BEACON_BASE3 0x2700 - -/* - * MAC Control/Status Registers(CSR). - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * MAC_CSR0: ASIC revision number. - */ -#define MAC_CSR0 0x3000 - -/* - * MAC_CSR1: System control register. - * SOFT_RESET: Software reset bit, 1: reset, 0: normal. - * BBP_RESET: Hardware reset BBP. - * HOST_READY: Host is ready after initialization, 1: ready. - */ -#define MAC_CSR1 0x3004 -#define MAC_CSR1_SOFT_RESET FIELD32(0x00000001) -#define MAC_CSR1_BBP_RESET FIELD32(0x00000002) -#define MAC_CSR1_HOST_READY FIELD32(0x00000004) - -/* - * MAC_CSR2: STA MAC register 0. - */ -#define MAC_CSR2 0x3008 -#define MAC_CSR2_BYTE0 FIELD32(0x000000ff) -#define MAC_CSR2_BYTE1 FIELD32(0x0000ff00) -#define MAC_CSR2_BYTE2 FIELD32(0x00ff0000) -#define MAC_CSR2_BYTE3 FIELD32(0xff000000) - -/* - * MAC_CSR3: STA MAC register 1. - */ -#define MAC_CSR3 0x300c -#define MAC_CSR3_BYTE4 FIELD32(0x000000ff) -#define MAC_CSR3_BYTE5 FIELD32(0x0000ff00) -#define MAC_CSR3_UNICAST_TO_ME_MASK FIELD32(0x00ff0000) - -/* - * MAC_CSR4: BSSID register 0. - */ -#define MAC_CSR4 0x3010 -#define MAC_CSR4_BYTE0 FIELD32(0x000000ff) -#define MAC_CSR4_BYTE1 FIELD32(0x0000ff00) -#define MAC_CSR4_BYTE2 FIELD32(0x00ff0000) -#define MAC_CSR4_BYTE3 FIELD32(0xff000000) - -/* - * MAC_CSR5: BSSID register 1. - * BSS_ID_MASK: 3: one BSSID, 0: 4 BSSID, 2 or 1: 2 BSSID. - */ -#define MAC_CSR5 0x3014 -#define MAC_CSR5_BYTE4 FIELD32(0x000000ff) -#define MAC_CSR5_BYTE5 FIELD32(0x0000ff00) -#define MAC_CSR5_BSS_ID_MASK FIELD32(0x00ff0000) - -/* - * MAC_CSR6: Maximum frame length register. - */ -#define MAC_CSR6 0x3018 -#define MAC_CSR6_MAX_FRAME_UNIT FIELD32(0x00000fff) - -/* - * MAC_CSR7: Reserved - */ -#define MAC_CSR7 0x301c - -/* - * MAC_CSR8: SIFS/EIFS register. - * All units are in US. - */ -#define MAC_CSR8 0x3020 -#define MAC_CSR8_SIFS FIELD32(0x000000ff) -#define MAC_CSR8_SIFS_AFTER_RX_OFDM FIELD32(0x0000ff00) -#define MAC_CSR8_EIFS FIELD32(0xffff0000) - -/* - * MAC_CSR9: Back-Off control register. - * SLOT_TIME: Slot time, default is 20us for 802.11BG. - * CWMIN: Bit for Cwmin. default Cwmin is 31 (2^5 - 1). - * CWMAX: Bit for Cwmax, default Cwmax is 1023 (2^10 - 1). - * CW_SELECT: 1: CWmin/Cwmax select from register, 0:select from TxD. - */ -#define MAC_CSR9 0x3024 -#define MAC_CSR9_SLOT_TIME FIELD32(0x000000ff) -#define MAC_CSR9_CWMIN FIELD32(0x00000f00) -#define MAC_CSR9_CWMAX FIELD32(0x0000f000) -#define MAC_CSR9_CW_SELECT FIELD32(0x00010000) - -/* - * MAC_CSR10: Power state configuration. - */ -#define MAC_CSR10 0x3028 - -/* - * MAC_CSR11: Power saving transition time register. - * DELAY_AFTER_TBCN: Delay after Tbcn expired in units of TU. - * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup. - * WAKEUP_LATENCY: In unit of TU. - */ -#define MAC_CSR11 0x302c -#define MAC_CSR11_DELAY_AFTER_TBCN FIELD32(0x000000ff) -#define MAC_CSR11_TBCN_BEFORE_WAKEUP FIELD32(0x00007f00) -#define MAC_CSR11_AUTOWAKE FIELD32(0x00008000) -#define MAC_CSR11_WAKEUP_LATENCY FIELD32(0x000f0000) - -/* - * MAC_CSR12: Manual power control / status register (merge CSR20 & PWRCSR1). - * CURRENT_STATE: 0:sleep, 1:awake. - * FORCE_WAKEUP: This has higher priority than PUT_TO_SLEEP. - * BBP_CURRENT_STATE: 0: BBP sleep, 1: BBP awake. - */ -#define MAC_CSR12 0x3030 -#define MAC_CSR12_CURRENT_STATE FIELD32(0x00000001) -#define MAC_CSR12_PUT_TO_SLEEP FIELD32(0x00000002) -#define MAC_CSR12_FORCE_WAKEUP FIELD32(0x00000004) -#define MAC_CSR12_BBP_CURRENT_STATE FIELD32(0x00000008) - -/* - * MAC_CSR13: GPIO. - */ -#define MAC_CSR13 0x3034 - -/* - * MAC_CSR14: LED control register. - * ON_PERIOD: On period, default 70ms. - * OFF_PERIOD: Off period, default 30ms. - * HW_LED: HW TX activity, 1: normal OFF, 0: normal ON. - * SW_LED: s/w LED, 1: ON, 0: OFF. - * HW_LED_POLARITY: 0: active low, 1: active high. - */ -#define MAC_CSR14 0x3038 -#define MAC_CSR14_ON_PERIOD FIELD32(0x000000ff) -#define MAC_CSR14_OFF_PERIOD FIELD32(0x0000ff00) -#define MAC_CSR14_HW_LED FIELD32(0x00010000) -#define MAC_CSR14_SW_LED FIELD32(0x00020000) -#define MAC_CSR14_HW_LED_POLARITY FIELD32(0x00040000) -#define MAC_CSR14_SW_LED2 FIELD32(0x00080000) - -/* - * MAC_CSR15: NAV control. - */ -#define MAC_CSR15 0x303c - -/* - * TXRX control registers. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * TXRX_CSR0: TX/RX configuration register. - * TSF_OFFSET: Default is 24. - * AUTO_TX_SEQ: 1: ASIC auto replace sequence nr in outgoing frame. - * DISABLE_RX: Disable Rx engine. - * DROP_CRC: Drop CRC error. - * DROP_PHYSICAL: Drop physical error. - * DROP_CONTROL: Drop control frame. - * DROP_NOT_TO_ME: Drop not to me unicast frame. - * DROP_TO_DS: Drop fram ToDs bit is true. - * DROP_VERSION_ERROR: Drop version error frame. - * DROP_MULTICAST: Drop multicast frames. - * DROP_BORADCAST: Drop broadcast frames. - * ROP_ACK_CTS: Drop received ACK and CTS. - */ -#define TXRX_CSR0 0x3040 -#define TXRX_CSR0_RX_ACK_TIMEOUT FIELD32(0x000001ff) -#define TXRX_CSR0_TSF_OFFSET FIELD32(0x00007e00) -#define TXRX_CSR0_AUTO_TX_SEQ FIELD32(0x00008000) -#define TXRX_CSR0_DISABLE_RX FIELD32(0x00010000) -#define TXRX_CSR0_DROP_CRC FIELD32(0x00020000) -#define TXRX_CSR0_DROP_PHYSICAL FIELD32(0x00040000) -#define TXRX_CSR0_DROP_CONTROL FIELD32(0x00080000) -#define TXRX_CSR0_DROP_NOT_TO_ME FIELD32(0x00100000) -#define TXRX_CSR0_DROP_TO_DS FIELD32(0x00200000) -#define TXRX_CSR0_DROP_VERSION_ERROR FIELD32(0x00400000) -#define TXRX_CSR0_DROP_MULTICAST FIELD32(0x00800000) -#define TXRX_CSR0_DROP_BROADCAST FIELD32(0x01000000) -#define TXRX_CSR0_DROP_ACK_CTS FIELD32(0x02000000) -#define TXRX_CSR0_TX_WITHOUT_WAITING FIELD32(0x04000000) - -/* - * TXRX_CSR1 - */ -#define TXRX_CSR1 0x3044 -#define TXRX_CSR1_BBP_ID0 FIELD32(0x0000007f) -#define TXRX_CSR1_BBP_ID0_VALID FIELD32(0x00000080) -#define TXRX_CSR1_BBP_ID1 FIELD32(0x00007f00) -#define TXRX_CSR1_BBP_ID1_VALID FIELD32(0x00008000) -#define TXRX_CSR1_BBP_ID2 FIELD32(0x007f0000) -#define TXRX_CSR1_BBP_ID2_VALID FIELD32(0x00800000) -#define TXRX_CSR1_BBP_ID3 FIELD32(0x7f000000) -#define TXRX_CSR1_BBP_ID3_VALID FIELD32(0x80000000) - -/* - * TXRX_CSR2 - */ -#define TXRX_CSR2 0x3048 -#define TXRX_CSR2_BBP_ID0 FIELD32(0x0000007f) -#define TXRX_CSR2_BBP_ID0_VALID FIELD32(0x00000080) -#define TXRX_CSR2_BBP_ID1 FIELD32(0x00007f00) -#define TXRX_CSR2_BBP_ID1_VALID FIELD32(0x00008000) -#define TXRX_CSR2_BBP_ID2 FIELD32(0x007f0000) -#define TXRX_CSR2_BBP_ID2_VALID FIELD32(0x00800000) -#define TXRX_CSR2_BBP_ID3 FIELD32(0x7f000000) -#define TXRX_CSR2_BBP_ID3_VALID FIELD32(0x80000000) - -/* - * TXRX_CSR3 - */ -#define TXRX_CSR3 0x304c -#define TXRX_CSR3_BBP_ID0 FIELD32(0x0000007f) -#define TXRX_CSR3_BBP_ID0_VALID FIELD32(0x00000080) -#define TXRX_CSR3_BBP_ID1 FIELD32(0x00007f00) -#define TXRX_CSR3_BBP_ID1_VALID FIELD32(0x00008000) -#define TXRX_CSR3_BBP_ID2 FIELD32(0x007f0000) -#define TXRX_CSR3_BBP_ID2_VALID FIELD32(0x00800000) -#define TXRX_CSR3_BBP_ID3 FIELD32(0x7f000000) -#define TXRX_CSR3_BBP_ID3_VALID FIELD32(0x80000000) - -/* - * TXRX_CSR4: Auto-Responder/Tx-retry register. - * AUTORESPOND_PREAMBLE: 0:long, 1:short preamble. - * OFDM_TX_RATE_DOWN: 1:enable. - * OFDM_TX_RATE_STEP: 0:1-step, 1: 2-step, 2:3-step, 3:4-step. - * OFDM_TX_FALLBACK_CCK: 0: Fallback to OFDM 6M only, 1: Fallback to CCK 1M,2M. - */ -#define TXRX_CSR4 0x3050 -#define TXRX_CSR4_TX_ACK_TIMEOUT FIELD32(0x000000ff) -#define TXRX_CSR4_CNTL_ACK_POLICY FIELD32(0x00000700) -#define TXRX_CSR4_ACK_CTS_PSM FIELD32(0x00010000) -#define TXRX_CSR4_AUTORESPOND_ENABLE FIELD32(0x00020000) -#define TXRX_CSR4_AUTORESPOND_PREAMBLE FIELD32(0x00040000) -#define TXRX_CSR4_OFDM_TX_RATE_DOWN FIELD32(0x00080000) -#define TXRX_CSR4_OFDM_TX_RATE_STEP FIELD32(0x00300000) -#define TXRX_CSR4_OFDM_TX_FALLBACK_CCK FIELD32(0x00400000) -#define TXRX_CSR4_LONG_RETRY_LIMIT FIELD32(0x0f000000) -#define TXRX_CSR4_SHORT_RETRY_LIMIT FIELD32(0xf0000000) - -/* - * TXRX_CSR5 - */ -#define TXRX_CSR5 0x3054 - -/* - * TXRX_CSR6: ACK/CTS payload consumed time - */ -#define TXRX_CSR6 0x3058 - -/* - * TXRX_CSR7: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps. - */ -#define TXRX_CSR7 0x305c -#define TXRX_CSR7_ACK_CTS_6MBS FIELD32(0x000000ff) -#define TXRX_CSR7_ACK_CTS_9MBS FIELD32(0x0000ff00) -#define TXRX_CSR7_ACK_CTS_12MBS FIELD32(0x00ff0000) -#define TXRX_CSR7_ACK_CTS_18MBS FIELD32(0xff000000) - -/* - * TXRX_CSR8: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps. - */ -#define TXRX_CSR8 0x3060 -#define TXRX_CSR8_ACK_CTS_24MBS FIELD32(0x000000ff) -#define TXRX_CSR8_ACK_CTS_36MBS FIELD32(0x0000ff00) -#define TXRX_CSR8_ACK_CTS_48MBS FIELD32(0x00ff0000) -#define TXRX_CSR8_ACK_CTS_54MBS FIELD32(0xff000000) - -/* - * TXRX_CSR9: Synchronization control register. - * BEACON_INTERVAL: In unit of 1/16 TU. - * TSF_TICKING: Enable TSF auto counting. - * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode. - * BEACON_GEN: Enable beacon generator. - */ -#define TXRX_CSR9 0x3064 -#define TXRX_CSR9_BEACON_INTERVAL FIELD32(0x0000ffff) -#define TXRX_CSR9_TSF_TICKING FIELD32(0x00010000) -#define TXRX_CSR9_TSF_SYNC FIELD32(0x00060000) -#define TXRX_CSR9_TBTT_ENABLE FIELD32(0x00080000) -#define TXRX_CSR9_BEACON_GEN FIELD32(0x00100000) -#define TXRX_CSR9_TIMESTAMP_COMPENSATE FIELD32(0xff000000) - -/* - * TXRX_CSR10: BEACON alignment. - */ -#define TXRX_CSR10 0x3068 - -/* - * TXRX_CSR11: AES mask. - */ -#define TXRX_CSR11 0x306c - -/* - * TXRX_CSR12: TSF low 32. - */ -#define TXRX_CSR12 0x3070 -#define TXRX_CSR12_LOW_TSFTIMER FIELD32(0xffffffff) - -/* - * TXRX_CSR13: TSF high 32. - */ -#define TXRX_CSR13 0x3074 -#define TXRX_CSR13_HIGH_TSFTIMER FIELD32(0xffffffff) - -/* - * TXRX_CSR14: TBTT timer. - */ -#define TXRX_CSR14 0x3078 - -/* - * TXRX_CSR15: TKIP MIC priority byte "AND" mask. - */ -#define TXRX_CSR15 0x307c - -/* - * PHY control registers. - * Some values are set in TU, whereas 1 TU == 1024 us. - */ - -/* - * PHY_CSR0: RF/PS control. - */ -#define PHY_CSR0 0x3080 -#define PHY_CSR0_PA_PE_BG FIELD32(0x00010000) -#define PHY_CSR0_PA_PE_A FIELD32(0x00020000) - -/* - * PHY_CSR1 - */ -#define PHY_CSR1 0x3084 -#define PHY_CSR1_RF_RPI FIELD32(0x00010000) - -/* - * PHY_CSR2: Pre-TX BBP control. - */ -#define PHY_CSR2 0x3088 - -/* - * PHY_CSR3: BBP serial control register. - * VALUE: Register value to program into BBP. - * REG_NUM: Selected BBP register. - * READ_CONTROL: 0: Write BBP, 1: Read BBP. - * BUSY: 1: ASIC is busy execute BBP programming. - */ -#define PHY_CSR3 0x308c -#define PHY_CSR3_VALUE FIELD32(0x000000ff) -#define PHY_CSR3_REGNUM FIELD32(0x00007f00) -#define PHY_CSR3_READ_CONTROL FIELD32(0x00008000) -#define PHY_CSR3_BUSY FIELD32(0x00010000) - -/* - * PHY_CSR4: RF serial control register - * VALUE: Register value (include register id) serial out to RF/IF chip. - * NUMBER_OF_BITS: Number of bits used in RFRegValue (I:20, RFMD:22). - * IF_SELECT: 1: select IF to program, 0: select RF to program. - * PLL_LD: RF PLL_LD status. - * BUSY: 1: ASIC is busy execute RF programming. - */ -#define PHY_CSR4 0x3090 -#define PHY_CSR4_VALUE FIELD32(0x00ffffff) -#define PHY_CSR4_NUMBER_OF_BITS FIELD32(0x1f000000) -#define PHY_CSR4_IF_SELECT FIELD32(0x20000000) -#define PHY_CSR4_PLL_LD FIELD32(0x40000000) -#define PHY_CSR4_BUSY FIELD32(0x80000000) - -/* - * PHY_CSR5: RX to TX signal switch timing control. - */ -#define PHY_CSR5 0x3094 -#define PHY_CSR5_IQ_FLIP FIELD32(0x00000004) - -/* - * PHY_CSR6: TX to RX signal timing control. - */ -#define PHY_CSR6 0x3098 -#define PHY_CSR6_IQ_FLIP FIELD32(0x00000004) - -/* - * PHY_CSR7: TX DAC switching timing control. - */ -#define PHY_CSR7 0x309c - -/* - * Security control register. - */ - -/* - * SEC_CSR0: Shared key table control. - */ -#define SEC_CSR0 0x30a0 -#define SEC_CSR0_BSS0_KEY0_VALID FIELD32(0x00000001) -#define SEC_CSR0_BSS0_KEY1_VALID FIELD32(0x00000002) -#define SEC_CSR0_BSS0_KEY2_VALID FIELD32(0x00000004) -#define SEC_CSR0_BSS0_KEY3_VALID FIELD32(0x00000008) -#define SEC_CSR0_BSS1_KEY0_VALID FIELD32(0x00000010) -#define SEC_CSR0_BSS1_KEY1_VALID FIELD32(0x00000020) -#define SEC_CSR0_BSS1_KEY2_VALID FIELD32(0x00000040) -#define SEC_CSR0_BSS1_KEY3_VALID FIELD32(0x00000080) -#define SEC_CSR0_BSS2_KEY0_VALID FIELD32(0x00000100) -#define SEC_CSR0_BSS2_KEY1_VALID FIELD32(0x00000200) -#define SEC_CSR0_BSS2_KEY2_VALID FIELD32(0x00000400) -#define SEC_CSR0_BSS2_KEY3_VALID FIELD32(0x00000800) -#define SEC_CSR0_BSS3_KEY0_VALID FIELD32(0x00001000) -#define SEC_CSR0_BSS3_KEY1_VALID FIELD32(0x00002000) -#define SEC_CSR0_BSS3_KEY2_VALID FIELD32(0x00004000) -#define SEC_CSR0_BSS3_KEY3_VALID FIELD32(0x00008000) - -/* - * SEC_CSR1: Shared key table security mode register. - */ -#define SEC_CSR1 0x30a4 -#define SEC_CSR1_BSS0_KEY0_CIPHER_ALG FIELD32(0x00000007) -#define SEC_CSR1_BSS0_KEY1_CIPHER_ALG FIELD32(0x00000070) -#define SEC_CSR1_BSS0_KEY2_CIPHER_ALG FIELD32(0x00000700) -#define SEC_CSR1_BSS0_KEY3_CIPHER_ALG FIELD32(0x00007000) -#define SEC_CSR1_BSS1_KEY0_CIPHER_ALG FIELD32(0x00070000) -#define SEC_CSR1_BSS1_KEY1_CIPHER_ALG FIELD32(0x00700000) -#define SEC_CSR1_BSS1_KEY2_CIPHER_ALG FIELD32(0x07000000) -#define SEC_CSR1_BSS1_KEY3_CIPHER_ALG FIELD32(0x70000000) - -/* - * Pairwise key table valid bitmap registers. - * SEC_CSR2: pairwise key table valid bitmap 0. - * SEC_CSR3: pairwise key table valid bitmap 1. - */ -#define SEC_CSR2 0x30a8 -#define SEC_CSR3 0x30ac - -/* - * SEC_CSR4: Pairwise key table lookup control. - */ -#define SEC_CSR4 0x30b0 - -/* - * SEC_CSR5: shared key table security mode register. - */ -#define SEC_CSR5 0x30b4 -#define SEC_CSR5_BSS2_KEY0_CIPHER_ALG FIELD32(0x00000007) -#define SEC_CSR5_BSS2_KEY1_CIPHER_ALG FIELD32(0x00000070) -#define SEC_CSR5_BSS2_KEY2_CIPHER_ALG FIELD32(0x00000700) -#define SEC_CSR5_BSS2_KEY3_CIPHER_ALG FIELD32(0x00007000) -#define SEC_CSR5_BSS3_KEY0_CIPHER_ALG FIELD32(0x00070000) -#define SEC_CSR5_BSS3_KEY1_CIPHER_ALG FIELD32(0x00700000) -#define SEC_CSR5_BSS3_KEY2_CIPHER_ALG FIELD32(0x07000000) -#define SEC_CSR5_BSS3_KEY3_CIPHER_ALG FIELD32(0x70000000) - -/* - * STA control registers. - */ - -/* - * STA_CSR0: RX PLCP error count & RX FCS error count. - */ -#define STA_CSR0 0x30c0 -#define STA_CSR0_FCS_ERROR FIELD32(0x0000ffff) -#define STA_CSR0_PLCP_ERROR FIELD32(0xffff0000) - -/* - * STA_CSR1: RX False CCA count & RX LONG frame count. - */ -#define STA_CSR1 0x30c4 -#define STA_CSR1_PHYSICAL_ERROR FIELD32(0x0000ffff) -#define STA_CSR1_FALSE_CCA_ERROR FIELD32(0xffff0000) - -/* - * STA_CSR2: TX Beacon count and RX FIFO overflow count. - */ -#define STA_CSR2 0x30c8 -#define STA_CSR2_RX_FIFO_OVERFLOW_COUNT FIELD32(0x0000ffff) -#define STA_CSR2_RX_OVERFLOW_COUNT FIELD32(0xffff0000) - -/* - * STA_CSR3: TX Beacon count. - */ -#define STA_CSR3 0x30cc -#define STA_CSR3_TX_BEACON_COUNT FIELD32(0x0000ffff) - -/* - * STA_CSR4: TX Retry count. - */ -#define STA_CSR4 0x30d0 -#define STA_CSR4_TX_NO_RETRY_COUNT FIELD32(0x0000ffff) -#define STA_CSR4_TX_ONE_RETRY_COUNT FIELD32(0xffff0000) - -/* - * STA_CSR5: TX Retry count. - */ -#define STA_CSR5 0x30d4 -#define STA_CSR4_TX_MULTI_RETRY_COUNT FIELD32(0x0000ffff) -#define STA_CSR4_TX_RETRY_FAIL_COUNT FIELD32(0xffff0000) - -/* - * QOS control registers. - */ - -/* - * QOS_CSR1: TXOP holder MAC address register. - */ -#define QOS_CSR1 0x30e4 -#define QOS_CSR1_BYTE4 FIELD32(0x000000ff) -#define QOS_CSR1_BYTE5 FIELD32(0x0000ff00) - -/* - * QOS_CSR2: TXOP holder timeout register. - */ -#define QOS_CSR2 0x30e8 - -/* - * RX QOS-CFPOLL MAC address register. - * QOS_CSR3: RX QOS-CFPOLL MAC address 0. - * QOS_CSR4: RX QOS-CFPOLL MAC address 1. - */ -#define QOS_CSR3 0x30ec -#define QOS_CSR4 0x30f0 - -/* - * QOS_CSR5: "QosControl" field of the RX QOS-CFPOLL. - */ -#define QOS_CSR5 0x30f4 - -/* - * WMM Scheduler Register - */ - -/* - * AIFSN_CSR: AIFSN for each EDCA AC. - * AIFSN0: For AC_BK. - * AIFSN1: For AC_BE. - * AIFSN2: For AC_VI. - * AIFSN3: For AC_VO. - */ -#define AIFSN_CSR 0x0400 -#define AIFSN_CSR_AIFSN0 FIELD32(0x0000000f) -#define AIFSN_CSR_AIFSN1 FIELD32(0x000000f0) -#define AIFSN_CSR_AIFSN2 FIELD32(0x00000f00) -#define AIFSN_CSR_AIFSN3 FIELD32(0x0000f000) - -/* - * CWMIN_CSR: CWmin for each EDCA AC. - * CWMIN0: For AC_BK. - * CWMIN1: For AC_BE. - * CWMIN2: For AC_VI. - * CWMIN3: For AC_VO. - */ -#define CWMIN_CSR 0x0404 -#define CWMIN_CSR_CWMIN0 FIELD32(0x0000000f) -#define CWMIN_CSR_CWMIN1 FIELD32(0x000000f0) -#define CWMIN_CSR_CWMIN2 FIELD32(0x00000f00) -#define CWMIN_CSR_CWMIN3 FIELD32(0x0000f000) - -/* - * CWMAX_CSR: CWmax for each EDCA AC. - * CWMAX0: For AC_BK. - * CWMAX1: For AC_BE. - * CWMAX2: For AC_VI. - * CWMAX3: For AC_VO. - */ -#define CWMAX_CSR 0x0408 -#define CWMAX_CSR_CWMAX0 FIELD32(0x0000000f) -#define CWMAX_CSR_CWMAX1 FIELD32(0x000000f0) -#define CWMAX_CSR_CWMAX2 FIELD32(0x00000f00) -#define CWMAX_CSR_CWMAX3 FIELD32(0x0000f000) - -/* - * AC_TXOP_CSR0: AC_BK/AC_BE TXOP register. - * AC0_TX_OP: For AC_BK, in unit of 32us. - * AC1_TX_OP: For AC_BE, in unit of 32us. - */ -#define AC_TXOP_CSR0 0x040c -#define AC_TXOP_CSR0_AC0_TX_OP FIELD32(0x0000ffff) -#define AC_TXOP_CSR0_AC1_TX_OP FIELD32(0xffff0000) - -/* - * AC_TXOP_CSR1: AC_VO/AC_VI TXOP register. - * AC2_TX_OP: For AC_VI, in unit of 32us. - * AC3_TX_OP: For AC_VO, in unit of 32us. - */ -#define AC_TXOP_CSR1 0x0410 -#define AC_TXOP_CSR1_AC2_TX_OP FIELD32(0x0000ffff) -#define AC_TXOP_CSR1_AC3_TX_OP FIELD32(0xffff0000) - -/* - * BBP registers. - * The wordsize of the BBP is 8 bits. - */ - -/* - * R2 - */ -#define BBP_R2_BG_MODE FIELD8(0x20) - -/* - * R3 - */ -#define BBP_R3_SMART_MODE FIELD8(0x01) - -/* - * R4: RX antenna control - * FRAME_END: 1 - DPDT, 0 - SPDT (Only valid for 802.11G, RF2527 & RF2529) - */ -#define BBP_R4_RX_ANTENNA FIELD8(0x03) -#define BBP_R4_RX_FRAME_END FIELD8(0x20) - -/* - * R77 - */ -#define BBP_R77_PAIR FIELD8(0x03) - -/* - * RF registers - */ - -/* - * RF 3 - */ -#define RF3_TXPOWER FIELD32(0x00003e00) - -/* - * RF 4 - */ -#define RF4_FREQ_OFFSET FIELD32(0x0003f000) - -/* - * EEPROM content. - * The wordsize of the EEPROM is 16 bits. - */ - -/* - * HW MAC address. - */ -#define EEPROM_MAC_ADDR_0 0x0002 -#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) -#define EEPROM_MAC_ADDR1 0x0003 -#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) -#define EEPROM_MAC_ADDR_2 0x0004 -#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) -#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) - -/* - * EEPROM antenna. - * ANTENNA_NUM: Number of antenna's. - * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. - * FRAME_TYPE: 0: DPDT , 1: SPDT , noted this bit is valid for g only. - * DYN_TXAGC: Dynamic TX AGC control. - * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0. - * RF_TYPE: Rf_type of this adapter. - */ -#define EEPROM_ANTENNA 0x0010 -#define EEPROM_ANTENNA_NUM FIELD16(0x0003) -#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c) -#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030) -#define EEPROM_ANTENNA_FRAME_TYPE FIELD16(0x0040) -#define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200) -#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400) -#define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800) - -/* - * EEPROM NIC config. - * EXTERNAL_LNA: External LNA. - */ -#define EEPROM_NIC 0x0011 -#define EEPROM_NIC_EXTERNAL_LNA FIELD16(0x0010) - -/* - * EEPROM geography. - * GEO_A: Default geographical setting for 5GHz band - * GEO: Default geographical setting. - */ -#define EEPROM_GEOGRAPHY 0x0012 -#define EEPROM_GEOGRAPHY_GEO_A FIELD16(0x00ff) -#define EEPROM_GEOGRAPHY_GEO FIELD16(0xff00) - -/* - * EEPROM BBP. - */ -#define EEPROM_BBP_START 0x0013 -#define EEPROM_BBP_SIZE 16 -#define EEPROM_BBP_VALUE FIELD16(0x00ff) -#define EEPROM_BBP_REG_ID FIELD16(0xff00) - -/* - * EEPROM TXPOWER 802.11G - */ -#define EEPROM_TXPOWER_G_START 0x0023 -#define EEPROM_TXPOWER_G_SIZE 7 -#define EEPROM_TXPOWER_G_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_G_2 FIELD16(0xff00) - -/* - * EEPROM Frequency - */ -#define EEPROM_FREQ 0x002f -#define EEPROM_FREQ_OFFSET FIELD16(0x00ff) -#define EEPROM_FREQ_SEQ_MASK FIELD16(0xff00) -#define EEPROM_FREQ_SEQ FIELD16(0x0300) - -/* - * EEPROM LED. - * POLARITY_RDY_G: Polarity RDY_G setting. - * POLARITY_RDY_A: Polarity RDY_A setting. - * POLARITY_ACT: Polarity ACT setting. - * POLARITY_GPIO_0: Polarity GPIO0 setting. - * POLARITY_GPIO_1: Polarity GPIO1 setting. - * POLARITY_GPIO_2: Polarity GPIO2 setting. - * POLARITY_GPIO_3: Polarity GPIO3 setting. - * POLARITY_GPIO_4: Polarity GPIO4 setting. - * LED_MODE: Led mode. - */ -#define EEPROM_LED 0x0030 -#define EEPROM_LED_POLARITY_RDY_G FIELD16(0x0001) -#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002) -#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004) -#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008) -#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010) -#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020) -#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040) -#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080) -#define EEPROM_LED_LED_MODE FIELD16(0x1f00) - -/* - * EEPROM TXPOWER 802.11A - */ -#define EEPROM_TXPOWER_A_START 0x0031 -#define EEPROM_TXPOWER_A_SIZE 12 -#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff) -#define EEPROM_TXPOWER_A_2 FIELD16(0xff00) - -/* - * EEPROM RSSI offset 802.11BG - */ -#define EEPROM_RSSI_OFFSET_BG 0x004d -#define EEPROM_RSSI_OFFSET_BG_1 FIELD16(0x00ff) -#define EEPROM_RSSI_OFFSET_BG_2 FIELD16(0xff00) - -/* - * EEPROM RSSI offset 802.11A - */ -#define EEPROM_RSSI_OFFSET_A 0x004e -#define EEPROM_RSSI_OFFSET_A_1 FIELD16(0x00ff) -#define EEPROM_RSSI_OFFSET_A_2 FIELD16(0xff00) - -/* - * DMA descriptor defines. - */ -#define TXD_DESC_SIZE ( 6 * sizeof(struct data_desc) ) -#define RXD_DESC_SIZE ( 6 * sizeof(struct data_desc) ) - -/* - * TX descriptor format for TX, PRIO and Beacon Ring. - */ - -/* - * Word0 - * BURST: Next frame belongs to same "burst" event. - * TKIP_MIC: ASIC appends TKIP MIC if TKIP is used. - * KEY_TABLE: Use per-client pairwise KEY table. - * KEY_INDEX: - * Key index (0~31) to the pairwise KEY table. - * 0~3 to shared KEY table 0 (BSS0). - * 4~7 to shared KEY table 1 (BSS1). - * 8~11 to shared KEY table 2 (BSS2). - * 12~15 to shared KEY table 3 (BSS3). - * BURST2: For backward compatibility, set to same value as BURST. - */ -#define TXD_W0_BURST FIELD32(0x00000001) -#define TXD_W0_VALID FIELD32(0x00000002) -#define TXD_W0_MORE_FRAG FIELD32(0x00000004) -#define TXD_W0_ACK FIELD32(0x00000008) -#define TXD_W0_TIMESTAMP FIELD32(0x00000010) -#define TXD_W0_OFDM FIELD32(0x00000020) -#define TXD_W0_IFS FIELD32(0x00000040) -#define TXD_W0_RETRY_MODE FIELD32(0x00000080) -#define TXD_W0_TKIP_MIC FIELD32(0x00000100) -#define TXD_W0_KEY_TABLE FIELD32(0x00000200) -#define TXD_W0_KEY_INDEX FIELD32(0x0000fc00) -#define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) -#define TXD_W0_BURST2 FIELD32(0x10000000) -#define TXD_W0_CIPHER_ALG FIELD32(0xe0000000) - -/* - * Word1 - * HOST_Q_ID: EDCA/HCCA queue ID. - * HW_SEQUENCE: MAC overwrites the frame sequence number. - * BUFFER_COUNT: Number of buffers in this TXD. - */ -#define TXD_W1_HOST_Q_ID FIELD32(0x0000000f) -#define TXD_W1_AIFSN FIELD32(0x000000f0) -#define TXD_W1_CWMIN FIELD32(0x00000f00) -#define TXD_W1_CWMAX FIELD32(0x0000f000) -#define TXD_W1_IV_OFFSET FIELD32(0x003f0000) -#define TXD_W1_HW_SEQUENCE FIELD32(0x10000000) -#define TXD_W1_BUFFER_COUNT FIELD32(0xe0000000) - -/* - * Word2: PLCP information - */ -#define TXD_W2_PLCP_SIGNAL FIELD32(0x000000ff) -#define TXD_W2_PLCP_SERVICE FIELD32(0x0000ff00) -#define TXD_W2_PLCP_LENGTH_LOW FIELD32(0x00ff0000) -#define TXD_W2_PLCP_LENGTH_HIGH FIELD32(0xff000000) - -/* - * Word3 - */ -#define TXD_W3_IV FIELD32(0xffffffff) - -/* - * Word4 - */ -#define TXD_W4_EIV FIELD32(0xffffffff) - -/* - * Word5 - * FRAME_OFFSET: Frame start offset inside ASIC TXFIFO (after TXINFO field). - * PACKET_ID: Driver assigned packet ID to categorize TXResult in interrupt. - * WAITING_DMA_DONE_INT: TXD been filled with data - * and waiting for TxDoneISR housekeeping. - */ -#define TXD_W5_FRAME_OFFSET FIELD32(0x000000ff) -#define TXD_W5_PACKET_ID FIELD32(0x0000ff00) -#define TXD_W5_TX_POWER FIELD32(0x00ff0000) -#define TXD_W5_WAITING_DMA_DONE_INT FIELD32(0x01000000) - -/* - * RX descriptor format for RX Ring. - */ - -/* - * Word0 - * CIPHER_ERROR: 1:ICV error, 2:MIC error, 3:invalid key. - * KEY_INDEX: Decryption key actually used. - */ -#define RXD_W0_OWNER_NIC FIELD32(0x00000001) -#define RXD_W0_DROP FIELD32(0x00000002) -#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000004) -#define RXD_W0_MULTICAST FIELD32(0x00000008) -#define RXD_W0_BROADCAST FIELD32(0x00000010) -#define RXD_W0_MY_BSS FIELD32(0x00000020) -#define RXD_W0_CRC_ERROR FIELD32(0x00000040) -#define RXD_W0_OFDM FIELD32(0x00000080) -#define RXD_W0_CIPHER_ERROR FIELD32(0x00000300) -#define RXD_W0_KEY_INDEX FIELD32(0x0000fc00) -#define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) -#define RXD_W0_CIPHER_ALG FIELD32(0xe0000000) - -/* - * WORD1 - * SIGNAL: RX raw data rate reported by BBP. - * RSSI: RSSI reported by BBP. - */ -#define RXD_W1_SIGNAL FIELD32(0x000000ff) -#define RXD_W1_RSSI_AGC FIELD32(0x00001f00) -#define RXD_W1_RSSI_LNA FIELD32(0x00006000) -#define RXD_W1_FRAME_OFFSET FIELD32(0x7f000000) - -/* - * Word2 - * IV: Received IV of originally encrypted. - */ -#define RXD_W2_IV FIELD32(0xffffffff) - -/* - * Word3 - * EIV: Received EIV of originally encrypted. - */ -#define RXD_W3_EIV FIELD32(0xffffffff) - -/* - * Word4 - */ -#define RXD_W4_RESERVED FIELD32(0xffffffff) - -/* - * the above 20-byte is called RXINFO and will be DMAed to MAC RX block - * and passed to the HOST driver. - * The following fields are for DMA block and HOST usage only. - * Can't be touched by ASIC MAC block. - */ - -/* - * Word5 - */ -#define RXD_W5_RESERVED FIELD32(0xffffffff) - -/* - * Macro's for converting txpower from EEPROM to dscape value - * and from dscape value to register value. - */ -#define MIN_TXPOWER 0 -#define MAX_TXPOWER 31 -#define DEFAULT_TXPOWER 24 - -#define TXPOWER_FROM_DEV(__txpower) \ -({ \ - ((__txpower) > MAX_TXPOWER) ? \ - DEFAULT_TXPOWER : (__txpower); \ -}) - -#define TXPOWER_TO_DEV(__txpower) \ -({ \ - ((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \ - (((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \ - (__txpower)); \ -}) - -#endif /* RT73USB_H */