ar71xx: automatically find WLAN calibration data on DIR-825-B1

SVN-Revision: 33538
This commit is contained in:
Gabor Juhos 2012-09-25 12:57:38 +00:00
parent e2504a977a
commit 8ed8e51e74

View File

@ -40,11 +40,13 @@
#define DIR825B1_KEYS_POLL_INTERVAL 20 /* msecs */ #define DIR825B1_KEYS_POLL_INTERVAL 20 /* msecs */
#define DIR825B1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825B1_KEYS_POLL_INTERVAL) #define DIR825B1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825B1_KEYS_POLL_INTERVAL)
#define DIR825B1_CAL_LOCATION_0 0x1f661000 #define DIR825B1_CAL0_OFFSET 0x1000
#define DIR825B1_CAL_LOCATION_1 0x1f665000 #define DIR825B1_CAL1_OFFSET 0x5000
#define DIR825B1_MAC0_OFFSET 0xffa0
#define DIR825B1_MAC1_OFFSET 0xffb4
#define DIR825B1_MAC_LOCATION_0 0x1f66ffa0 #define DIR825B1_CAL_LOCATION_0 0x1f660000
#define DIR825B1_MAC_LOCATION_1 0x1f66ffb4 #define DIR825B1_CAL_LOCATION_1 0x1f7f0000
static struct gpio_led dir825b1_leds_gpio[] __initdata = { static struct gpio_led dir825b1_leds_gpio[] __initdata = {
{ {
@ -111,10 +113,9 @@ static struct platform_device dir825b1_rtl8366s_device = {
} }
}; };
static void dir825b1_read_ascii_mac(u8 *dest, unsigned int src_addr) static void dir825b1_read_ascii_mac(u8 *dest, u8 *src)
{ {
int ret; int ret;
u8 *src = (u8 *)KSEG1ADDR(src_addr);
ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx", ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
&dest[0], &dest[1], &dest[2], &dest[0], &dest[1], &dest[2],
@ -124,23 +125,55 @@ static void dir825b1_read_ascii_mac(u8 *dest, unsigned int src_addr)
memset(dest, 0, ETH_ALEN); memset(dest, 0, ETH_ALEN);
} }
static void __init dir825b1_setup(void) static bool __init dir825b1_is_caldata_valid(u8 *p)
{ {
u16 *magic0, *magic1;
magic0 = (u16 *)(p + DIR825B1_CAL0_OFFSET);
magic1 = (u16 *)(p + DIR825B1_CAL1_OFFSET);
return (*magic0 == 0xa55a && *magic1 == 0xa55a);
}
static void __init dir825b1_wlan_init(void)
{
u8 *caldata;
u8 mac1[ETH_ALEN], mac2[ETH_ALEN]; u8 mac1[ETH_ALEN], mac2[ETH_ALEN];
dir825b1_read_ascii_mac(mac1, DIR825B1_MAC_LOCATION_0); caldata = (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0);
dir825b1_read_ascii_mac(mac2, DIR825B1_MAC_LOCATION_1); if (!dir825b1_is_caldata_valid(caldata)) {
caldata = (u8 *)KSEG1ADDR(DIR825B1_CAL_LOCATION_1);
if (!dir825b1_is_caldata_valid(caldata)) {
pr_err("no calibration data found\n");
return;
}
}
dir825b1_read_ascii_mac(mac1, caldata + DIR825B1_MAC0_OFFSET);
dir825b1_read_ascii_mac(mac2, caldata + DIR825B1_MAC1_OFFSET);
ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 2);
ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 3);
ap9x_pci_setup_wmac_led_pin(0, 5);
ap9x_pci_setup_wmac_led_pin(1, 5);
ap94_pci_init(caldata + DIR825B1_CAL0_OFFSET, mac1,
caldata + DIR825B1_CAL1_OFFSET, mac2);
}
static void __init dir825b1_setup(void)
{
dir825b1_wlan_init();
ath79_register_mdio(0, 0x0); ath79_register_mdio(0, 0x0);
ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 2);
ath79_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev; ath79_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.speed = SPEED_1000; ath79_eth0_data.speed = SPEED_1000;
ath79_eth0_data.duplex = DUPLEX_FULL; ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_pll_data.pll_1000 = 0x11110000; ath79_eth0_pll_data.pll_1000 = 0x11110000;
ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 3);
ath79_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev; ath79_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth1_data.phy_mask = 0x10; ath79_eth1_data.phy_mask = 0x10;
@ -161,12 +194,6 @@ static void __init dir825b1_setup(void)
ath79_register_usb(); ath79_register_usb();
platform_device_register(&dir825b1_rtl8366s_device); platform_device_register(&dir825b1_rtl8366s_device);
ap9x_pci_setup_wmac_led_pin(0, 5);
ap9x_pci_setup_wmac_led_pin(1, 5);
ap94_pci_init((u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0), mac1,
(u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1), mac2);
} }
MIPS_MACHINE(ATH79_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1", MIPS_MACHINE(ATH79_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1",