ar71xx: enable AR7240 DSA driver on 2.6.33 as well

SVN-Revision: 20059
This commit is contained in:
Gabor Juhos 2010-03-08 14:38:43 +00:00
parent c859a20e69
commit 8eac86e535
3 changed files with 109 additions and 0 deletions

View File

@ -212,6 +212,7 @@ CONFIG_MTD_WRT160NL_PARTS=y
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_MYLOADER=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_AR7240=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6063=y
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
@ -220,6 +221,7 @@ CONFIG_NET_DSA_MV88E6063=y
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_TAG_DSA is not set
# CONFIG_NET_DSA_TAG_EDSA is not set
CONFIG_NET_DSA_TAG_QINQ=y
CONFIG_NET_DSA_TAG_TRAILER=y
# CONFIG_NO_IOPORT is not set
# CONFIG_NXP_STB220 is not set

View File

@ -0,0 +1,79 @@
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -81,6 +81,7 @@
#define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */
#define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */
#define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */
+#define ETH_P_QINQ 0x9100 /* QinQ VLAN Stacking Protocol */
#define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
/*
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -174,6 +174,9 @@ netdev_tx_t dsa_xmit(struct sk_buff *skb
/* tag_edsa.c */
netdev_tx_t edsa_xmit(struct sk_buff *skb, struct net_device *dev);
+/* tag_qinq.c */
+netdev_tx_t qinq_xmit(struct sk_buff *skb, struct net_device *dev);
+
/* tag_trailer.c */
netdev_tx_t trailer_xmit(struct sk_buff *skb, struct net_device *dev);
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -23,6 +23,10 @@ config NET_DSA_TAG_TRAILER
bool
default n
+config NET_DSA_TAG_QINQ
+ bool
+ default y
+
# switch drivers
config NET_DSA_MV88E6XXX
--- a/net/dsa/Makefile
+++ b/net/dsa/Makefile
@@ -1,6 +1,7 @@
# tagging formats
obj-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa.o
obj-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o
+obj-$(CONFIG_NET_DSA_TAG_QINQ) += tag_qinq.o
obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
# switch drivers
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -321,6 +321,19 @@ static const struct net_device_ops edsa_
.ndo_do_ioctl = dsa_slave_ioctl,
};
#endif
+#ifdef CONFIG_NET_DSA_TAG_QINQ
+static const struct net_device_ops qinq_netdev_ops = {
+ .ndo_init = dsa_slave_init,
+ .ndo_open = dsa_slave_open,
+ .ndo_stop = dsa_slave_close,
+ .ndo_start_xmit = qinq_xmit,
+ .ndo_change_rx_flags = dsa_slave_change_rx_flags,
+ .ndo_set_rx_mode = dsa_slave_set_rx_mode,
+ .ndo_set_multicast_list = dsa_slave_set_rx_mode,
+ .ndo_set_mac_address = dsa_slave_set_mac_address,
+ .ndo_do_ioctl = dsa_slave_ioctl,
+};
+#endif
#ifdef CONFIG_NET_DSA_TAG_TRAILER
static const struct net_device_ops trailer_netdev_ops = {
.ndo_init = dsa_slave_init,
@@ -366,6 +379,11 @@ dsa_slave_create(struct dsa_switch *ds,
slave_dev->netdev_ops = &edsa_netdev_ops;
break;
#endif
+#ifdef CONFIG_NET_DSA_TAG_QINQ
+ case htons(ETH_P_QINQ):
+ slave_dev->netdev_ops = &qinq_netdev_ops;
+ break;
+#endif
#ifdef CONFIG_NET_DSA_TAG_TRAILER
case htons(ETH_P_TRAILER):
slave_dev->netdev_ops = &trailer_netdev_ops;

View File

@ -0,0 +1,28 @@
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -29,6 +29,15 @@ config NET_DSA_TAG_QINQ
# switch drivers
+config NET_DSA_AR7240
+ bool "Atheros AR7240 built-in ethernet switch support"
+ depends on ATHEROS_AR71XX
+ default n
+ select NET_DSA_TAG_QINQ
+ ---help---
+ This enables support for the built-in ethernet switch of the
+ Atheros AR7240 SoC.
+
config NET_DSA_MV88E6XXX
bool
default n
--- a/net/dsa/Makefile
+++ b/net/dsa/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_NET_DSA_TAG_QINQ) += tag_qi
obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
# switch drivers
+obj-$(CONFIG_NET_DSA_AR7240) += ar7240.o
obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o