From 8e8cafcd0e7354f6c2db09c4549fe901b843f12d Mon Sep 17 00:00:00 2001 From: Mikhail Zhilkin Date: Sat, 22 Mar 2025 17:33:39 +0000 Subject: [PATCH] mediatek: add support for netis NX31 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This PR adds support for netis NX31 router. Specification ------------- - SoC : MediaTek MT7981BA dual-core ARM Cortex-A53 1.3 GHz - RAM : 256 MiB DDR3 - Flash : SPI-NAND 128 MiB (ESMT) - WLAN : MediaTek MT7976CN dual-band WiFi 6 - 2.4 GHz : b/g/n/ax, MIMO 2x2 - 5 GHz : a/n/ac/ax, MIMO 2x2 - Ethernet : 10/100/1000 Mbps x3 (LAN, MediaTek MT7531AE) 10/100/1000 Mbps x1 (WAN, SoC internal phy) - USB : No - Buttons : Mesh, Reset - LEDs : 1x Power (blue), unmanaged 1x Status (blue), gpio-controlled 1x WiFi 2.4 GHz (blue), gpio-controlled 1x WiFi 5 GHz (blue), gpio-controlled 3x LAN activity (blue), switch-controlled 1x WAN activity (blue), gpio-controlled - Power : 12 VDC, 1 A Installation ------------ 1. Connect to the router using ssh (user: admin, pass: web interface password) 2. Make mtd backup: cat /dev/mtd0 | gzip -1 -c > /tmp/mtd0_spi0.0.bin.gz cat /dev/mtd1 | gzip -1 -c > /tmp/mtd1_BL2.bin.gz cat /dev/mtd2 | gzip -1 -c > /tmp/mtd2_u-boot-env.bin.gz cat /dev/mtd3 | gzip -1 -c > /tmp/mtd3_Factory.bin.gz cat /dev/mtd4 | gzip -1 -c > /tmp/mtd4_FIP.bin.gz cat /dev/mtd5 | gzip -1 -c > /tmp/mtd5_ubi.bin.gz 3. Download mtd backup from the /tmp dir of the router to your PC using scp protocol 4. Upload OpenWrt 'bl31-uboot.fip', 'preloader.bin' images to the /tmp dir of the router using scp protocol 5. Write FIP and BL2 (replace bootloader): mtd write /tmp/openwrt-mediatek-filogic-netis_nx31-bl31-uboot.fip FIP mtd write /tmp/openwrt-mediatek-filogic-netis_nx31-preloader.bin BL2 6. Place OpenWrt 'openwrt-mediatek-filogic-netis_nx31-initramfs-recovery.itb' image on the tftp server (IP: 192.168.1.254) 7. Erase 'ubi' partition and reboot the router: mtd erase ubi reboot 8. U-Boot automatically boot OpenWrt recovery image from tftp server to the RAM 9. Upload OpenWrt 'sysupgrade.itb' image to the /tmp dir of the router (IP: 192.168.1.1) using scp protocol 10. Connect to the router using ssh and run: sysupgrade -n openwrt-mediatek-filogic-netis_nx31-squashfs-sysupgrade.itb Return to stock --------------- 1. Unpack stock BL2 and FIP partitions backup 2. Upload stock BL2 and FIP partitions backup to the /tmp dir of the router using scp protocol 3. Connect to the router using ssh and run: apk update && apk add kmod-mtd-rw insmod mtd-rw i_want_a_brick=1 mtd unlock BL2 mtd unlock FIP 4. Restore backup: mtd write /tmp/mtd4_FIP.bin FIP mtd write /tmp/mtd1_BL2.bin BL2 5. Erase ubi and reboot: mtd erase ubi reboot 6. Power off the router 7. Press Reset button and power on the router. Release the button after ~10 sec 8. Navigate to U-Boot recovery web server (http://192.168.1.1/) and upload the OEM firmware Recovery -------- 1. Place OpenWrt 'openwrt-mediatek-filogic-netis_nx31-initramfs-recovery.itb' image on the tftp server (IP: 192.168.1.254) 2. Press “Reset” button and power on the router. After ~10 sec release the button. 3. Use OpenWrt initramfs system for recovery MAC addresses ------------- +---------+-------------------+-----------+ | | MAC | Algorithm | +---------+-------------------+-----------+ | LAN | dc:xx:xx:d1:xx:18 | label | | WAN | dc:xx:xx:d1:xx:1a | label+2 | | WLAN 2g | de:xx:xx:11:xx:19 | | | WLAN 5g | de:xx:xx:71:xx:19 | | +---------+-------------------+-----------+ The LAN MAC was found in 'Factory', 0x1fef20 The WAN MAC was found in 'Factory', 0x1fef26 The WLAN 2g/5g MAC prototype was found in 'Factory', 0x4 Signed-off-by: Mikhail Zhilkin Link: https://github.com/openwrt/openwrt/pull/18324 (cherry picked from commit d8002cb627edcbef27dedf9768a45ab0435ac55e) Signed-off-by: Mikhail Zhilkin Link: https://github.com/openwrt/openwrt/pull/18438 Signed-off-by: Hauke Mehrtens --- .../uboot-envtools/files/mediatek_filogic | 1 + package/boot/uboot-mediatek/Makefile | 13 + .../patches/445-add-netis-nx31.patch | 334 ++++++++++++++++++ .../linux/mediatek/dts/mt7981b-netis-nx31.dts | 301 ++++++++++++++++ .../filogic/base-files/etc/board.d/01_leds | 3 + .../filogic/base-files/etc/board.d/02_network | 1 + .../etc/hotplug.d/ieee80211/11_fix_wifi_mac | 8 + .../base-files/lib/upgrade/platform.sh | 1 + target/linux/mediatek/image/filogic.mk | 25 ++ 9 files changed, 687 insertions(+) create mode 100644 package/boot/uboot-mediatek/patches/445-add-netis-nx31.patch create mode 100644 target/linux/mediatek/dts/mt7981b-netis-nx31.dts diff --git a/package/boot/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-envtools/files/mediatek_filogic index 67363b0f422..b43a5dcfcd7 100644 --- a/package/boot/uboot-envtools/files/mediatek_filogic +++ b/package/boot/uboot-envtools/files/mediatek_filogic @@ -39,6 +39,7 @@ h3c,magic-nx30-pro|\ jcg,q30-pro|\ mercusys,mr90x-v1-ubi|\ netcore,n60|\ +netis,nx31|\ nokia,ea0326gmp|\ qihoo,360t7|\ routerich,ax3000-ubootmod|\ diff --git a/package/boot/uboot-mediatek/Makefile b/package/boot/uboot-mediatek/Makefile index b1285f9ca37..c7f47a70c01 100644 --- a/package/boot/uboot-mediatek/Makefile +++ b/package/boot/uboot-mediatek/Makefile @@ -315,6 +315,18 @@ define U-Boot/mt7981_jcg_q30-pro DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3 endef +define U-Boot/mt7981_netis_nx31 + NAME:=netis NX31 + BUILD_SUBTARGET:=filogic + BUILD_DEVICES:=netis_nx31 + UBOOT_CONFIG:=mt7981_netis_nx31 + UBOOT_IMAGE:=u-boot.fip + BL2_BOOTDEV:=spim-nand + BL2_SOC:=mt7981 + BL2_DDRTYPE:=ddr3 + DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3 +endef + define U-Boot/mt7981_nokia_ea0326gmp NAME:=Nokia EA0326GMP BUILD_SUBTARGET:=filogic @@ -852,6 +864,7 @@ UBOOT_TARGETS := \ mt7981_glinet_gl-xe3000 \ mt7981_h3c_magic-nx30-pro \ mt7981_jcg_q30-pro \ + mt7981_netis_nx31 \ mt7981_nokia_ea0326gmp \ mt7981_openwrt_one-snand \ mt7981_openwrt_one-nor \ diff --git a/package/boot/uboot-mediatek/patches/445-add-netis-nx31.patch b/package/boot/uboot-mediatek/patches/445-add-netis-nx31.patch new file mode 100644 index 00000000000..55a94189d30 --- /dev/null +++ b/package/boot/uboot-mediatek/patches/445-add-netis-nx31.patch @@ -0,0 +1,334 @@ +--- /dev/null ++++ b/configs/mt7981_netis_nx31_defconfig +@@ -0,0 +1,106 @@ ++CONFIG_ARM=y ++CONFIG_SYS_HAS_NONCACHED_MEMORY=y ++CONFIG_POSITION_INDEPENDENT=y ++CONFIG_ARCH_MEDIATEK=y ++CONFIG_TEXT_BASE=0x41e00000 ++CONFIG_SYS_MALLOC_F_LEN=0x4000 ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_DEFAULT_DEVICE_TREE="mt7981-netis_nx31" ++CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_TARGET_MT7981=y ++CONFIG_SYS_LOAD_ADDR=0x46000000 ++CONFIG_PRE_CON_BUF_ADDR=0x4007ef00 ++CONFIG_DEBUG_UART_BASE=0x11002000 ++CONFIG_DEBUG_UART_CLOCK=40000000 ++CONFIG_DEBUG_UART=y ++CONFIG_FIT=y ++CONFIG_BOOTDELAY=30 ++CONFIG_AUTOBOOT_KEYED=y ++CONFIG_AUTOBOOT_MENU_SHOW=y ++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-netis_nx31.dtb" ++CONFIG_LOGLEVEL=7 ++CONFIG_PRE_CONSOLE_BUFFER=y ++CONFIG_LOG=y ++CONFIG_BOARD_LATE_INIT=y ++CONFIG_HUSH_PARSER=y ++CONFIG_SYS_PROMPT="MT7981> " ++CONFIG_CMD_CPU=y ++CONFIG_CMD_LICENSE=y ++CONFIG_CMD_BOOTMENU=y ++CONFIG_CMD_ASKENV=y ++CONFIG_CMD_ERASEENV=y ++CONFIG_CMD_ENV_FLAGS=y ++CONFIG_CMD_STRINGS=y ++CONFIG_CMD_DM=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_MTD=y ++CONFIG_CMD_PART=y ++CONFIG_CMD_TFTPSRV=y ++CONFIG_CMD_RARP=y ++CONFIG_CMD_CDP=y ++CONFIG_CMD_SNTP=y ++CONFIG_CMD_LINK_LOCAL=y ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_DNS=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_PXE=y ++CONFIG_CMD_CACHE=y ++CONFIG_CMD_PSTORE=y ++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 ++CONFIG_CMD_UUID=y ++CONFIG_CMD_HASH=y ++CONFIG_CMD_SMC=y ++CONFIG_CMD_UBI=y ++CONFIG_CMD_UBI_RENAME=y ++CONFIG_OF_EMBED=y ++CONFIG_ENV_OVERWRITE=y ++CONFIG_ENV_IS_IN_UBI=y ++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y ++CONFIG_ENV_UBI_PART="ubi" ++CONFIG_ENV_UBI_VOLUME="ubootenv" ++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2" ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_USE_DEFAULT_ENV_FILE=y ++CONFIG_DEFAULT_ENV_FILE="defenvs/netis_nx31_env" ++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y ++CONFIG_VERSION_VARIABLE=y ++CONFIG_NETCONSOLE=y ++CONFIG_USE_IPADDR=y ++CONFIG_IPADDR="192.168.1.1" ++CONFIG_USE_SERVERIP=y ++CONFIG_SERVERIP="192.168.1.254" ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_BUTTON=y ++CONFIG_BUTTON_GPIO=y ++CONFIG_CLK=y ++CONFIG_GPIO_HOG=y ++CONFIG_LED=y ++CONFIG_LED_BLINK=y ++CONFIG_LED_GPIO=y ++# CONFIG_MMC is not set ++CONFIG_MTD=y ++CONFIG_DM_MTD=y ++CONFIG_MTD_SPI_NAND=y ++CONFIG_MTD_UBI_FASTMAP=y ++CONFIG_PHY_FIXED=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PHY=y ++CONFIG_PHY_MTK_TPHY=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7981=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_REGULATOR_GPIO=y ++CONFIG_RAM=y ++CONFIG_DM_SERIAL=y ++CONFIG_SERIAL_RX_BUFFER=y ++CONFIG_MTK_SERIAL=y ++CONFIG_SPI=y ++CONFIG_DM_SPI=y ++CONFIG_MTK_SPIM=y ++CONFIG_ZSTD=y ++CONFIG_HEXDUMP=y +--- /dev/null ++++ b/arch/arm/dts/mt7981-netis_nx31.dts +@@ -0,0 +1,162 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Copyright (c) 2025 ++ * Author: Mikhail Zhilkin ++ */ ++ ++/dts-v1/; ++#include "mt7981.dtsi" ++#include ++#include ++ ++/ { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ model = "netis NX31"; ++ compatible = "netis,nx31", "mediatek,mt7981"; ++ ++ chosen { ++ stdout-path = &uart0; ++ tick-timer = &timer0; ++ }; ++ ++ memory@40000000 { ++ device_type = "memory"; ++ reg = <0x40000000 0x10000000>; ++ }; ++ ++ keys { ++ compatible = "gpio-keys"; ++ ++ button-0 { ++ label = "mesh"; ++ linux,code = ; ++ gpios = <&gpio 1 GPIO_ACTIVE_LOW>; ++ }; ++ ++ button-1 { ++ label = "reset"; ++ linux,code = ; ++ gpios = <&gpio 1 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ led-0 { ++ label = "blue:wlan2g"; ++ gpios = <&gpio 5 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-1 { ++ label = "blue:status"; ++ gpios = <&gpio 7 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-2 { ++ label = "blue:wan"; ++ gpios = <&gpio 8 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-3 { ++ label = "blue:wlan5g"; ++ gpios = <&gpio 34 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++}; ++ ++&uart0 { ++ mediatek,force-highspeed; ++ status = "okay"; ++}; ++ ++ð { ++ status = "okay"; ++ mediatek,gmac-id = <0>; ++ phy-mode = "2500base-x"; ++ mediatek,switch = "mt7531"; ++ reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>; ++ ++ fixed-link { ++ speed = <2500>; ++ full-duplex; ++ }; ++}; ++ ++&pinctrl { ++ spi_flash_pins: spi0-pins-func-1 { ++ mux { ++ function = "flash"; ++ groups = "spi0", "spi0_wp_hold"; ++ }; ++ ++ conf-pu { ++ pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; ++ drive-strength = ; ++ bias-pull-up = ; ++ }; ++ ++ conf-pd { ++ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; ++ drive-strength = ; ++ bias-pull-down = ; ++ }; ++ }; ++}; ++ ++&spi0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi_flash_pins>; ++ status = "okay"; ++ must_tx; ++ enhance_timing; ++ dma_ext; ++ ipm_design; ++ support_quad; ++ tick_dly = <2>; ++ sample_sel = <0>; ++ ++ spi_nand@0 { ++ compatible = "spi-nand"; ++ reg = <0>; ++ spi-max-frequency = <52000000>; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "BL2"; ++ reg = <0x0 0x100000>; ++ }; ++ ++ partition@100000 { ++ label = "u-boot-env (unused)"; ++ reg = <0x100000 0x80000>; ++ }; ++ ++ partition@160000 { ++ label = "Factory"; ++ reg = <0x180000 0x200000>; ++ }; ++ ++ partition@380000 { ++ label = "FIP"; ++ reg = <0x380000 0x200000>; ++ }; ++ ++ partition@580000 { ++ label = "ubi"; ++ reg = <0x580000 0x7a80000>; ++ }; ++ }; ++ }; ++}; ++ ++&watchdog { ++ status = "disabled"; ++}; +--- /dev/null ++++ b/defenvs/netis_nx31_env +@@ -0,0 +1,57 @@ ++ipaddr=192.168.1.1 ++serverip=192.168.1.254 ++loadaddr=0x46000000 ++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 ++bootcmd=run check_buttons ; if pstore check ; then run boot_recovery ; else run boot_ubi ; fi ++bootconf=config-1 ++bootdelay=0 ++bootfile=openwrt-mediatek-filogic-netis_nx31-initramfs-recovery.itb ++bootfile_bl2=openwrt-mediatek-filogic-netis_nx31-preloader.bin ++bootfile_fip=openwrt-mediatek-filogic-netis_nx31-bl31-uboot.fip ++bootfile_upg=openwrt-mediatek-filogic-netis_nx31-squashfs-sysupgrade.itb ++bootled_status=blue:status ++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 ++bootmenu_default=0 ++bootmenu_delay=0 ++bootmenu_title= ( ( ( OpenWrt ) ) ) ++bootmenu_0=Initialize environment.=run _firstboot ++bootmenu_0d=Run default boot command.=run boot_default ++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return ++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return ++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return ++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return ++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return ++bootmenu_8=Reboot.=reset ++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset ++boot_first=if button reset ; then led $bootled_status on ; run boot_default ; fi ; bootmenu ++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever ++boot_production=led $bootled_status on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led bootled_status off ++boot_recovery=led $bootled_status on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led bootled_status off ++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever ++boot_tftp_forever=led $bootled_status on ; while true ; do run boot_tftp ; sleep 1 ; done ++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf ++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory ++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2 ++check_buttons=if button reset ; then run boot_tftp ; fi ++ethaddr_factory=mtd read Factory 0x40080000 0x1e0000 0x20000 && env readmem -b ethaddr 0x4009ef20 0x6 ; setenv ethaddr_factory ++part_default=production ++part_recovery=recovery ++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800 ++mtd_write_fip=mtd erase FIP && mtd write FIP $loadaddr ++mtd_write_bl2=mtd erase BL2 && mtd write BL2 $loadaddr ++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format ++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset ++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi ++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs ++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery ++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data ++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize ++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize ++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv ++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first ++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title ++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver" diff --git a/target/linux/mediatek/dts/mt7981b-netis-nx31.dts b/target/linux/mediatek/dts/mt7981b-netis-nx31.dts new file mode 100644 index 00000000000..82f666df794 --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-netis-nx31.dts @@ -0,0 +1,301 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT + +/dts-v1/; +#include +#include +#include + +#include "mt7981.dtsi" + +/ { + model = "netis NX31"; + compatible = "netis,nx31", "mediatek,mt7981"; + + aliases { + label-mac-device = &gmac0; + + led-boot = &led_status_blue; + led-failsafe = &led_status_blue; + led-running = &led_status_blue; + led-upgrade = &led_status_blue; + + serial0 = &uart0; + }; + + chosen { + rootdisk = <&ubi_fit_volume>; + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-0 { + label = "mesh"; + gpios = <&pio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + }; + + button-1 { + label = "reset"; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = ; + function = LED_FUNCTION_WLAN_2GHZ; + gpios = <&pio 5 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + led_status_blue: led-1 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 7 GPIO_ACTIVE_LOW>; + }; + + led-2 { + color = ; + function = LED_FUNCTION_WAN; + gpios = <&pio 8 GPIO_ACTIVE_LOW>; + }; + + led-3 { + color = ; + function = LED_FUNCTION_WLAN_5GHZ; + gpios = <&pio 34 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + }; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_factory_1fef20 0>; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "gmii"; + phy-handle = <&int_gbe_phy>; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_factory_1fef26 0>; + }; +}; + +&mdio_bus { + switch: switch@1f { + compatible = "mediatek,mt7531"; + reg = <0x1f>; + reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + status = "okay"; + + spi_nand@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + reg = <0>; + + spi-max-frequency = <52000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + spi-cal-enable; + spi-cal-mode = "read-data"; + spi-cal-datalen = <7>; + spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4e 0x41 0x4e 0x44>; + spi-cal-addrlen = <5>; + spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "BL2"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env (unused)"; + reg = <0x100000 0x80000>; + read-only; + }; + + partition@180000 { + label = "Factory"; + reg = <0x180000 0x200000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x1000>; + }; + + macaddr_factory_4: macaddr@4 { + compatible = "mac-base"; + reg = <0x4 0x6>; + #nvmem-cell-cells = <1>; + }; + + macaddr_factory_1fef20: macaddr@1fef20 { + compatible = "mac-base"; + reg = <0x1fef20 0x6>; + #nvmem-cell-cells = <1>; + }; + + macaddr_factory_1fef26: macaddr@1fef26 { + compatible = "mac-base"; + reg = <0x1fef26 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + + partition@380000 { + label = "FIP"; + reg = <0x380000 0x200000>; + read-only; + }; + + partition@580000 { + label = "ubi"; + reg = <0x580000 0x7a80000>; + compatible = "linux,ubi"; + + volumes { + ubi_fit_volume: ubi-volume-fit { + volname = "fit"; + }; + + ubi_ubootenv: ubi-volume-ubootenv { + volname = "ubootenv"; + }; + + ubi_ubootenv2: ubi-volume-ubootenv2 { + volname = "ubootenv2"; + }; + }; + }; + }; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&pio { + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = ; + bias-pull-up = ; + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = ; + bias-pull-down = ; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&ubi_ubootenv { + nvmem-layout { + compatible = "u-boot,env-redundant-bool"; + }; +}; + +&ubi_ubootenv2 { + nvmem-layout { + compatible = "u-boot,env-redundant-bool"; + }; +}; + +&watchdog { + status = "okay"; +}; + +&wifi { + status = "okay"; + nvmem-cell-names = "eeprom"; + nvmem-cells = <&eeprom_factory_0>; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds index c2d9971f6f1..73d91ee2441 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds @@ -59,6 +59,9 @@ mercusys,mr90x-v1-ubi) netgear,wax220) ucidef_set_led_netdev "eth0" "LAN" "green:lan" "eth0" ;; +netis,nx31) + ucidef_set_led_netdev "wan" "wan" "blue:wan" "eth1" "link tx rx" + ;; nokia,ea0326gmp) ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1" "link" ucidef_set_led_netdev "lan" "LAN" "green:lan" "br-lan" "link" diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 6da63168234..a97cd37c587 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -11,6 +11,7 @@ mediatek_setup_interfaces() abt,asr3000|\ cmcc,rax3000m|\ h3c,magic-nx30-pro|\ + netis,nx31|\ nokia,ea0326gmp|\ zbtlink,zbt-z8103ax) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1 diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index a9d06f9b846..8b9499b319f 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -128,6 +128,14 @@ case "$board" in [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 3 > /sys${DEVPATH}/macaddress ;; + netis,nx31) + addr=$(mtd_get_mac_binary "Factory" 0x4) + addr=$(macaddr_unsetbit $(macaddr_setbit_la $addr) 25) + addr_2g=$(macaddr_unsetbit $(macaddr_unsetbit $addr 26) 27) + addr_5g=$(macaddr_setbit $(macaddr_setbit $addr 26) 27) + [ "$PHYNBR" = "0" ] && echo "$addr_2g" > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && echo "$addr_5g" > /sys${DEVPATH}/macaddress + ;; nokia,ea0326gmp) addr=$(cat /sys/class/net/eth0/address) [ "$PHYNBR" = "0" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index a13b46d4c1c..2a8029dd187 100755 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -80,6 +80,7 @@ platform_do_upgrade() { mediatek,mt7981-rfb|\ mediatek,mt7988a-rfb|\ mercusys,mr90x-v1-ubi|\ + netis,nx31|\ nokia,ea0326gmp|\ openwrt,one|\ netcore,n60|\ diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 0de101df993..248593ede78 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -1257,6 +1257,31 @@ define Device/netgear_wax220 endef TARGET_DEVICES += netgear_wax220 +define Device/netis_nx31 + DEVICE_VENDOR := netis + DEVICE_MODEL := NX31 + DEVICE_DTS := mt7981b-netis-nx31 + DEVICE_DTS_DIR := ../dts + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + KERNEL_IN_UBI := 1 + UBOOTENV_IN_UBI := 1 + IMAGES := sysupgrade.itb + KERNEL_INITRAMFS_SUFFIX := -recovery.itb + KERNEL := kernel-bin | gzip + KERNEL_INITRAMFS := kernel-bin | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k + IMAGE/sysupgrade.itb := append-kernel | \ + fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \ + append-metadata + DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware + ARTIFACTS := preloader.bin bl31-uboot.fip + ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3 + ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot netis_nx31 +endef +TARGET_DEVICES += netis_nx31 + define Device/nokia_ea0326gmp DEVICE_VENDOR := Nokia DEVICE_MODEL := EA0326GMP