ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-04-09 04:15:47 +00:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity

brcm47xx: remove kernel 3.10

Browse Source 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43535
This commit is contained in:
Hauke Mehrtens 2014-12-07 15:34:28 +00:00
parent dc6171c734
commit 8e738da02c
81 changed files with 0 additions and 8115 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

161
target/linux/brcm47xx/config-3.10
View File

@ -1,161 +0,0 @@
CONFIG_ADM6996_PHY=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_B53=y
# CONFIG_B53_MMAP_DRIVER is not set
CONFIG_B53_PHY_DRIVER=y
CONFIG_B53_PHY_FIXUP=y
# CONFIG_B53_SRAB_DRIVER is not set
CONFIG_BCM47XX=y
CONFIG_BCM47XX_BCMA=y
CONFIG_BCM47XX_SSB=y
CONFIG_BCM47XX_WDT=y
CONFIG_BCMA=y
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_DEBUG=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DRIVER_MIPS=y
CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_NFLASH=y
CONFIG_BCMA_SFLASH=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="noinitrd console=ttyS0,115200"
CONFIG_CMDLINE_BOOL=y
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_CPU_GENERIC_DUMP_TLB=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
CONFIG_CPU_MIPSR1=y
CONFIG_CPU_MIPSR2_IRQ_VI=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_EARLY_PRINTK is not set
CONFIG_FIXED_PHY=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_WDT=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=y
CONFIG_HZ_PERIODIC=y
CONFIG_IMAGE_CMDLINE_HACK=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQ_CPU=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_LEDS_GPIO_REGISTER=y
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
CONFIG_MIPS_MT_DISABLED=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MTD_BCM47XXSFLASH=y
CONFIG_MTD_BCM47XX_PARTS=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_BCM47XXNFLASH=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_SM_COMMON is not set
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NO_EXCEPT_FILL=y
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PCI=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PHYLIB=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_STALL_COMMON is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SSB=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_EXTIF=y
CONFIG_SSB_DRIVER_GIGE=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_SSB_DRIVER_MIPS=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_EMBEDDED=y
CONFIG_SSB_PCICORE_HOSTMODE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_SERIAL=y
CONFIG_SSB_SFLASH=y
CONFIG_SSB_SPROM=y
CONFIG_SWCONFIG=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_HIGHMEM=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_UIDGID_CONVERTED=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_WATCHDOG_CORE=y
CONFIG_ZONE_DMA_FLAG=0

30
target/linux/brcm47xx/patches-3.10/020-mtd-bcm47xxpart-handle-malloc-failures.patch
View File

@ -1,30 +0,0 @@
From 99b1d1887fee36ef9ff5d2ee24f0cf3e8c172104 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sun, 13 Oct 2013 22:53:49 +0200
Subject: [PATCH] mtd: bcm47xxpart: handle malloc failures
Handle return NULL in malloc.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
drivers/mtd/bcm47xxpart.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -71,7 +71,14 @@ static int bcm47xxpart_parse(struct mtd_
/* Alloc */
parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS,
GFP_KERNEL);
+ if (!parts)
+ return -ENOMEM;
+
buf = kzalloc(BCM47XXPART_BYTES_TO_READ, GFP_KERNEL);
+ if (!buf) {
+ kfree(parts);
+ return -ENOMEM;
+ }
/* Parse block by block looking for magics */
for (offset = 0; offset <= master->size - blocksize;

50
target/linux/brcm47xx/patches-3.10/021-mtd-bcm47xxpart-detect-block-aligned-Squashfs-partit.patch
View File

@ -1,50 +0,0 @@
From 020c6bcfbeabee72c18d862769d72cf9241b9004 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Mon, 21 Oct 2013 22:34:37 +0200
Subject: [PATCH] mtd: bcm47xxpart: detect block aligned Squashfs partition
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Most of the bcm47xx devices use TRX format for storing kernel and some
partition like Squashfs or JFFS2. This is pretty flexible solution, CFE
(the bootloader) just writes (and later boots) TRX at some hardcoded
place and paritions can vary in the size.
However some devices don't use TRX format. Very recently we have
discovered ZTE H218N that has kernel and rootfs partitions at some
"random" places.
This patch allows Linux find a rootfs partition after installing custom
image with a CFE bootloader.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
drivers/mtd/bcm47xxpart.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -32,6 +32,7 @@
#define ML_MAGIC1 0x39685a42
#define ML_MAGIC2 0x26594131
#define TRX_MAGIC 0x30524448
+#define SQSH_MAGIC 0x71736873 /* shsq */
struct trx_header {
uint32_t magic;
@@ -174,6 +175,13 @@ static int bcm47xxpart_parse(struct mtd_
offset = rounddown(offset + trx->length, blocksize);
continue;
}
+
+ /* Squashfs on devices not using TRX */
+ if (buf[0x000 / 4] == SQSH_MAGIC) {
+ bcm47xxpart_add_part(&parts[curr_part++], "rootfs",
+ offset, 0);
+ continue;
+ }
}
/* Look for NVRAM at the end of the last block. */

41
target/linux/brcm47xx/patches-3.10/022-mtd-bcm47xxpart-detect-factory-partition.patch
View File

@ -1,41 +0,0 @@
From 33094c736cd36a6cecadae6bce4daba89dabc326 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Mon, 21 Oct 2013 22:35:34 +0200
Subject: [PATCH] mtd: bcm47xxpart: detect "factory" partition
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
A new type of partition with magic FCTY was found on Huawei E970:
46 43 54 59 4b 51 37 4e 41 42 31 38 41 32 39 30 |FCTYKQ7NAB18A290|
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
drivers/mtd/bcm47xxpart.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -27,6 +27,7 @@
/* Magics */
#define BOARD_DATA_MAGIC 0x5246504D /* MPFR */
+#define FACTORY_MAGIC 0x59544346 /* FCTY */
#define POT_MAGIC1 0x54544f50 /* POTT */
#define POT_MAGIC2 0x504f /* OP */
#define ML_MAGIC1 0x39685a42
@@ -117,6 +118,13 @@ static int bcm47xxpart_parse(struct mtd_
offset, MTD_WRITEABLE);
continue;
}
+
+ /* Found on Huawei E970 */
+ if (buf[0x000 / 4] == FACTORY_MAGIC) {
+ bcm47xxpart_add_part(&parts[curr_part++], "factory",
+ offset, MTD_WRITEABLE);
+ continue;
+ }
/* POT(TOP) */
if (buf[0x000 / 4] == POT_MAGIC1 &&

43
target/linux/brcm47xx/patches-3.10/023-mtd-bcm47xxpart-find-boot-partition-by-CFE-magic.patch
View File

@ -1,43 +0,0 @@
From 4f8aaf72287578c846ed7ac8c6114aacbf416e45 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Sat, 21 Dec 2013 19:39:11 +0100
Subject: [PATCH] mtd: bcm47xxpart: find boot partition by CFE magic
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Some devices have even nicer-to-recognize CFE thanks to the magic.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
drivers/mtd/bcm47xxpart.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -23,10 +23,11 @@
* Amount of bytes we read when analyzing each block of flash memory.
* Set it big enough to allow detecting partition and reading important data.
*/
-#define BCM47XXPART_BYTES_TO_READ 0x404
+#define BCM47XXPART_BYTES_TO_READ 0x4e8
/* Magics */
#define BOARD_DATA_MAGIC 0x5246504D /* MPFR */
+#define CFE_MAGIC 0x43464531 /* 1EFC */
#define FACTORY_MAGIC 0x59544346 /* FCTY */
#define POT_MAGIC1 0x54544f50 /* POTT */
#define POT_MAGIC2 0x504f /* OP */
@@ -102,8 +103,9 @@ static int bcm47xxpart_parse(struct mtd_
continue;
}
- /* CFE has small NVRAM at 0x400 */
- if (buf[0x400 / 4] == NVRAM_HEADER) {
+ /* Magic or small NVRAM at 0x400 */
+ if ((buf[0x4e0 / 4] == CFE_MAGIC && buf[0x4e4 / 4] == CFE_MAGIC) ||
+ (buf[0x400 / 4] == NVRAM_HEADER)) {
bcm47xxpart_add_part(&parts[curr_part++], "boot",
offset, MTD_WRITEABLE);
continue;

52
target/linux/brcm47xx/patches-3.10/024-mtd-bcm47xxpart-alternative-MAGIC-for-board_data-par.patch
View File

@ -1,52 +0,0 @@
From f0501e81fbaa51cfc8c28c60bc3fc7965fde94f4 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Sat, 21 Dec 2013 19:39:12 +0100
Subject: [PATCH] mtd: bcm47xxpart: alternative MAGIC for board_data partition
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Some devices (like WNDR3700v3) have board_data without MPFR magic, some
extra header or extra NVRAM around 0x100. In such case we have to look
for another magic which is BD 0B 0D BD (BD probably stands for Board
Data). It's located "far far away", so instead of extending buffer add
another mtd_read.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
drivers/mtd/bcm47xxpart.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -27,6 +27,7 @@
/* Magics */
#define BOARD_DATA_MAGIC 0x5246504D /* MPFR */
+#define BOARD_DATA_MAGIC2 0xBD0D0BBD
#define CFE_MAGIC 0x43464531 /* 1EFC */
#define FACTORY_MAGIC 0x59544346 /* FCTY */
#define POT_MAGIC1 0x54544f50 /* POTT */
@@ -192,6 +193,21 @@ static int bcm47xxpart_parse(struct mtd_
offset, 0);
continue;
}
+
+ /* Read middle of the block */
+ if (mtd_read(master, offset + 0x8000, 0x4,
+ &bytes_read, (uint8_t *)buf) < 0) {
+ pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
+ offset);
+ continue;
+ }
+
+ /* Some devices (ex. WNDR3700v3) don't have a standard 'MPFR' */
+ if (buf[0x000 / 4] == BOARD_DATA_MAGIC2) {
+ bcm47xxpart_add_part(&parts[curr_part++], "board_data",
+ offset, MTD_WRITEABLE);
+ continue;
+ }
}
/* Look for NVRAM at the end of the last block. */

34
target/linux/brcm47xx/patches-3.10/027-mtd-bcm47xxpart-get-nvram.patch
View File

@ -1,34 +0,0 @@
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -68,6 +68,7 @@ static int bcm47xxpart_parse(struct mtd_
int trx_part = -1;
int last_trx_part = -1;
int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
+ bool found_nvram = false;
if (blocksize <= 0x10000)
blocksize = 0x10000;
@@ -229,12 +230,23 @@ static int bcm47xxpart_parse(struct mtd_
if (buf[0] == NVRAM_HEADER) {
bcm47xxpart_add_part(&parts[curr_part++], "nvram",
master->size - blocksize, 0);
+ found_nvram = true;
break;
}
}
kfree(buf);
+ if (!found_nvram) {
+ pr_err("can not find a nvram partition reserve last block\n");
+ bcm47xxpart_add_part(&parts[curr_part++], "nvram_guess",
+ master->size - blocksize * 2, MTD_WRITEABLE);
+ for (i = 0; i < curr_part; i++) {
+ if (parts[i].size + parts[i].offset == master->size)
+ parts[i].offset -= blocksize * 2;
+ }
+ }
+
/*
* Assume that partitions end at the beginning of the one they are
* followed by.

53
target/linux/brcm47xx/patches-3.10/050-mtd_bcm47xxsflash_implement_ChipCommon_RW_ops.patch
View File

@ -1,53 +0,0 @@
commit c8a1de474f49bd928f84e7a99b6f3d23a65b5637
Author: Rafał Miłecki <zajec5@gmail.com>
Date: Sun Mar 24 21:53:24 2013 +0100
mtd: bcm47xxsflash: implement ChipCommon R/W ops
They are needed for erasing/writing. Use a magic pointers and small
functions to preapre code for adding other buses support in the future
(like SSB).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
--- a/drivers/mtd/devices/bcm47xxsflash.c
+++ b/drivers/mtd/devices/bcm47xxsflash.c
@@ -48,6 +48,17 @@ static void bcm47xxsflash_fill_mtd(struc
* BCMA
**************************************************/
+static int bcm47xxsflash_bcma_cc_read(struct bcm47xxsflash *b47s, u16 offset)
+{
+ return bcma_cc_read32(b47s->bcma_cc, offset);
+}
+
+static void bcm47xxsflash_bcma_cc_write(struct bcm47xxsflash *b47s, u16 offset,
+ u32 value)
+{
+ bcma_cc_write32(b47s->bcma_cc, offset, value);
+}
+
static int bcm47xxsflash_bcma_probe(struct platform_device *pdev)
{
struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
@@ -62,6 +73,8 @@ static int bcm47xxsflash_bcma_probe(stru
sflash->priv = b47s;
b47s->bcma_cc = container_of(sflash, struct bcma_drv_cc, sflash);
+ b47s->cc_read = bcm47xxsflash_bcma_cc_read;
+ b47s->cc_write = bcm47xxsflash_bcma_cc_write;
switch (b47s->bcma_cc->capabilities & BCMA_CC_CAP_FLASHT) {
case BCMA_CC_FLASHT_STSER:
--- a/drivers/mtd/devices/bcm47xxsflash.h
+++ b/drivers/mtd/devices/bcm47xxsflash.h
@@ -60,6 +60,8 @@ enum bcm47xxsflash_type {
struct bcm47xxsflash {
struct bcma_drv_cc *bcma_cc;
+ int (*cc_read)(struct bcm47xxsflash *b47s, u16 offset);
+ void (*cc_write)(struct bcm47xxsflash *b47s, u16 offset, u32 value);
enum bcm47xxsflash_type type;

87
target/linux/brcm47xx/patches-3.10/051-mtd_bcm47xxsflash_implement_polling_chip_status.patch
View File

@ -1,87 +0,0 @@
commit 7026e9844112fa33e5ffcd562daf0c919b16a9d1
Author: Rafał Miłecki <zajec5@gmail.com>
Date: Sun Mar 24 21:51:31 2013 +0100
mtd: bcm47xxsflash: implement polling chip status
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
--- a/drivers/mtd/devices/bcm47xxsflash.c
+++ b/drivers/mtd/devices/bcm47xxsflash.c
@@ -1,6 +1,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/delay.h>
#include <linux/mtd/mtd.h>
#include <linux/platform_device.h>
#include <linux/bcma/bcma.h>
@@ -12,6 +13,57 @@ MODULE_DESCRIPTION("Serial flash driver
static const char * const probes[] = { "bcm47xxpart", NULL };
+/**************************************************
+ * Various helpers
+ **************************************************/
+
+static void bcm47xxsflash_cmd(struct bcm47xxsflash *b47s, u32 opcode)
+{
+ int i;
+
+ b47s->cc_write(b47s, BCMA_CC_FLASHCTL, BCMA_CC_FLASHCTL_START | opcode);
+ for (i = 0; i < 1000; i++) {
+ if (!(b47s->cc_read(b47s, BCMA_CC_FLASHCTL) &
+ BCMA_CC_FLASHCTL_BUSY))
+ return;
+ cpu_relax();
+ }
+ pr_err("Control command failed (timeout)!\n");
+}
+
+static int bcm47xxsflash_poll(struct bcm47xxsflash *b47s, int timeout)
+{
+ unsigned long deadline = jiffies + timeout;
+
+ do {
+ switch (b47s->type) {
+ case BCM47XXSFLASH_TYPE_ST:
+ bcm47xxsflash_cmd(b47s, OPCODE_ST_RDSR);
+ if (!(b47s->cc_read(b47s, BCMA_CC_FLASHDATA) &
+ SR_ST_WIP))
+ return 0;
+ break;
+ case BCM47XXSFLASH_TYPE_ATMEL:
+ bcm47xxsflash_cmd(b47s, OPCODE_AT_STATUS);
+ if (b47s->cc_read(b47s, BCMA_CC_FLASHDATA) &
+ SR_AT_READY)
+ return 0;
+ break;
+ }
+
+ cpu_relax();
+ udelay(1);
+ } while (!time_after_eq(jiffies, deadline));
+
+ pr_err("Timeout waiting for flash to be ready!\n");
+
+ return -EBUSY;
+}
+
+/**************************************************
+ * MTD ops
+ **************************************************/
+
static int bcm47xxsflash_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
@@ -97,6 +149,9 @@ static int bcm47xxsflash_bcma_probe(stru
goto err_dev_reg;
}
+ if (bcm47xxsflash_poll(b47s, HZ / 10))
+ pr_warn("Serial flash busy\n");
+
return 0;
err_dev_reg:

74
target/linux/brcm47xx/patches-3.10/052-mtd_bcm47xxsflash_implement_erasing_support.patch
View File

@ -1,74 +0,0 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Subject: [PATCH] mtd: bcm47xxsflash: implement erasing support
Date: Tue, 21 May 2013 21:03:46 +0200
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
This has been succesfully tested on BCM4706.
---
drivers/mtd/devices/bcm47xxsflash.c | 43 +++++++++++++++++++++++++++++++++--
1 file changed, 41 insertions(+), 2 deletions(-)
--- a/drivers/mtd/devices/bcm47xxsflash.c
+++ b/drivers/mtd/devices/bcm47xxsflash.c
@@ -64,6 +64,42 @@ static int bcm47xxsflash_poll(struct bcm
* MTD ops
**************************************************/
+static int bcm47xxsflash_erase(struct mtd_info *mtd, struct erase_info *erase)
+{
+ struct bcm47xxsflash *b47s = mtd->priv;
+ int err;
+
+ switch (b47s->type) {
+ case BCM47XXSFLASH_TYPE_ST:
+ bcm47xxsflash_cmd(b47s, OPCODE_ST_WREN);
+ b47s->cc_write(b47s, BCMA_CC_FLASHADDR, erase->addr);
+ /* Newer flashes have "sub-sectors" which can be erased
+ * independently with a new command: ST_SSE. The ST_SE command
+ * erases 64KB just as before.
+ */
+ if (b47s->blocksize < (64 * 1024))
+ bcm47xxsflash_cmd(b47s, OPCODE_ST_SSE);
+ else
+ bcm47xxsflash_cmd(b47s, OPCODE_ST_SE);
+ break;
+ case BCM47XXSFLASH_TYPE_ATMEL:
+ b47s->cc_write(b47s, BCMA_CC_FLASHADDR, erase->addr << 1);
+ bcm47xxsflash_cmd(b47s, OPCODE_AT_PAGE_ERASE);
+ break;
+ }
+
+ err = bcm47xxsflash_poll(b47s, HZ);
+ if (err)
+ erase->state = MTD_ERASE_FAILED;
+ else
+ erase->state = MTD_ERASE_DONE;
+
+ if (erase->callback)
+ erase->callback(erase);
+
+ return err;
+}
+
static int bcm47xxsflash_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
@@ -88,12 +124,15 @@ static void bcm47xxsflash_fill_mtd(struc
mtd->name = "bcm47xxsflash";
mtd->owner = THIS_MODULE;
mtd->type = MTD_ROM;
- mtd->size = b47s->size;
- mtd->_read = bcm47xxsflash_read;
/* TODO: implement writing support and verify/change following code */
mtd->flags = MTD_CAP_ROM;
+ mtd->size = b47s->size;
+ mtd->erasesize = b47s->blocksize;
mtd->writebufsize = mtd->writesize = 1;
+
+ mtd->_erase = bcm47xxsflash_erase;
+ mtd->_read = bcm47xxsflash_read;
}
/**************************************************

160
target/linux/brcm47xx/patches-3.10/053-mtd_bcm47xxsflash_writing_support.patch
View File

@ -1,160 +0,0 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Subject: [RFC][PATCH] mtd: bcm47xxsflash: writing support
Date: Wed, 22 May 2013 14:39:02 +0200
---
drivers/mtd/devices/bcm47xxsflash.c | 130 +++++++++++++++++++++++++++++++++--
1 file changed, 126 insertions(+), 4 deletions(-)
--- a/drivers/mtd/devices/bcm47xxsflash.c
+++ b/drivers/mtd/devices/bcm47xxsflash.c
@@ -116,6 +116,127 @@ static int bcm47xxsflash_read(struct mtd
return len;
}
+static int bcm47xxsflash_write_st(struct mtd_info *mtd, u32 offset, size_t len,
+ const u_char *buf)
+{
+ struct bcm47xxsflash *b47s = mtd->priv;
+ int written = 0;
+
+ /* Enable writes */
+ bcm47xxsflash_cmd(b47s, OPCODE_ST_WREN);
+
+ /* Write first byte */
+ b47s->cc_write(b47s, BCMA_CC_FLASHADDR, offset);
+ b47s->cc_write(b47s, BCMA_CC_FLASHDATA, *buf++);
+
+ /* Program page */
+ if (b47s->bcma_cc->core->id.rev < 20) {
+ bcm47xxsflash_cmd(b47s, OPCODE_ST_PP);
+ return 1; /* 1B written */
+ }
+
+ /* Program page and set CSA (on newer chips we can continue writing) */
+ bcm47xxsflash_cmd(b47s, OPCODE_ST_CSA | OPCODE_ST_PP);
+ offset++;
+ len--;
+ written++;
+
+ while (len > 0) {
+ /* Page boundary, another function call is needed */
+ if ((offset & 0xFF) == 0)
+ break;
+
+ bcm47xxsflash_cmd(b47s, OPCODE_ST_CSA | *buf++);
+ offset++;
+ len--;
+ written++;
+ }
+
+ /* All done, drop CSA & poll */
+ b47s->cc_write(b47s, BCMA_CC_FLASHCTL, 0);
+ udelay(1);
+ if (bcm47xxsflash_poll(b47s, HZ / 10))
+ pr_err("Flash rejected dropping CSA\n");
+
+ return written;
+}
+
+static int bcm47xxsflash_write_at(struct mtd_info *mtd, u32 offset, size_t len,
+ const u_char *buf)
+{
+ struct bcm47xxsflash *b47s = mtd->priv;
+ u32 mask = b47s->blocksize - 1;
+ u32 page = (offset & ~mask) << 1;
+ u32 byte = offset & mask;
+ int written = 0;
+
+ /* If we don't overwrite whole page, read it to the buffer first */
+ if (byte || (len < b47s->blocksize)) {
+ int err;
+
+ b47s->cc_write(b47s, BCMA_CC_FLASHADDR, page);
+ bcm47xxsflash_cmd(b47s, OPCODE_AT_BUF1_LOAD);
+ /* 250 us for AT45DB321B */
+ err = bcm47xxsflash_poll(b47s, HZ / 1000);
+ if (err) {
+ pr_err("Timeout reading page 0x%X info buffer\n", page);
+ return err;
+ }
+ }
+
+ /* Change buffer content with our data */
+ while (len > 0) {
+ /* Page boundary, another function call is needed */
+ if (byte == b47s->blocksize)
+ break;
+
+ b47s->cc_write(b47s, BCMA_CC_FLASHADDR, byte++);
+ b47s->cc_write(b47s, BCMA_CC_FLASHDATA, *buf++);
+ bcm47xxsflash_cmd(b47s, OPCODE_AT_BUF1_WRITE);
+ len--;
+ written++;
+ }
+
+ /* Program page with the buffer content */
+ b47s->cc_write(b47s, BCMA_CC_FLASHADDR, page);
+ bcm47xxsflash_cmd(b47s, OPCODE_AT_BUF1_PROGRAM);
+
+ return written;
+}
+
+static int bcm47xxsflash_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ struct bcm47xxsflash *b47s = mtd->priv;
+ int written;
+
+ /* Writing functions can return without writing all passed data, for
+ * example when the hardware is too old or when we git page boundary.
+ */
+ while (len > 0) {
+ switch (b47s->type) {
+ case BCM47XXSFLASH_TYPE_ST:
+ written = bcm47xxsflash_write_st(mtd, to, len, buf);
+ break;
+ case BCM47XXSFLASH_TYPE_ATMEL:
+ written = bcm47xxsflash_write_at(mtd, to, len, buf);
+ break;
+ default:
+ BUG_ON(1);
+ }
+ if (written < 0) {
+ pr_err("Error writing at offset 0x%llX\n", to);
+ return written;
+ }
+ to += (loff_t)written;
+ len -= written;
+ *retlen += written;
+ buf += written;
+ }
+
+ return 0;
+}
+
static void bcm47xxsflash_fill_mtd(struct bcm47xxsflash *b47s)
{
struct mtd_info *mtd = &b47s->mtd;
@@ -123,16 +244,17 @@ static void bcm47xxsflash_fill_mtd(struc
mtd->priv = b47s;
mtd->name = "bcm47xxsflash";
mtd->owner = THIS_MODULE;
- mtd->type = MTD_ROM;
- /* TODO: implement writing support and verify/change following code */
- mtd->flags = MTD_CAP_ROM;
+ mtd->type = MTD_NORFLASH;
+ mtd->flags = MTD_CAP_NORFLASH;
mtd->size = b47s->size;
mtd->erasesize = b47s->blocksize;
- mtd->writebufsize = mtd->writesize = 1;
+ mtd->writesize = 1;
+ mtd->writebufsize = 1;
mtd->_erase = bcm47xxsflash_erase;
mtd->_read = bcm47xxsflash_read;
+ mtd->_write = bcm47xxsflash_write;
}
/**************************************************

62
target/linux/brcm47xx/patches-3.10/054-mtd_bcm47xxsflash_convert_kzalloc_to_avoid_invalid_access.patch
View File

@ -1,62 +0,0 @@
Date: Thu, 30 May 2013 10:22:12 +0800
From: Libo Chen <clbchenlibo.chen@huawei.com>
Subject: [PATCH RESEND 1/2] mtd: bcm47: convert kzalloc to avoid invalid access
mtd is just member of bcm47xxsflash, so we should free bcm47xxsflash not its member.
So I use devm_kazlloc instead of kazlloc to avoid it.
* Changelog:
convert to devm_kzalloc
Signed-off-by: Libo chen <libo.chen@huawei.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
drivers/mtd/devices/bcm47xxsflash.c | 16 ++++------------
1 files changed, 4 insertions(+), 12 deletions(-)
--- a/drivers/mtd/devices/bcm47xxsflash.c
+++ b/drivers/mtd/devices/bcm47xxsflash.c
@@ -278,11 +278,9 @@ static int bcm47xxsflash_bcma_probe(stru
struct bcm47xxsflash *b47s;
int err;
- b47s = kzalloc(sizeof(*b47s), GFP_KERNEL);
- if (!b47s) {
- err = -ENOMEM;
- goto out;
- }
+ b47s = devm_kzalloc(&pdev->dev, sizeof(*b47s), GFP_KERNEL);
+ if (!b47s)
+ return -ENOMEM;
sflash->priv = b47s;
b47s->bcma_cc = container_of(sflash, struct bcma_drv_cc, sflash);
@@ -307,18 +305,13 @@ static int bcm47xxsflash_bcma_probe(stru
err = mtd_device_parse_register(&b47s->mtd, probes, NULL, NULL, 0);
if (err) {
pr_err("Failed to register MTD device: %d\n", err);
- goto err_dev_reg;
+ return err;
}
if (bcm47xxsflash_poll(b47s, HZ / 10))
pr_warn("Serial flash busy\n");
return 0;
-
-err_dev_reg:
- kfree(&b47s->mtd);
-out:
- return err;
}
static int bcm47xxsflash_bcma_remove(struct platform_device *pdev)
@@ -327,7 +320,6 @@ static int bcm47xxsflash_bcma_remove(str
struct bcm47xxsflash *b47s = sflash->priv;
mtd_device_unregister(&b47s->mtd);
- kfree(b47s);
return 0;
}

39
target/linux/brcm47xx/patches-3.10/055-mtd_bcm47xxsflash_convert_to_module_platform_driver.patch
View File

@ -1,39 +0,0 @@
Date: Thu, 30 May 2013 10:22:16 +0800
From: Libo Chen <clbchenlibo.chen@huawei.com>
Subject: [PATCH RESEND 2/2] mtd: bcm47: convert to module_platform_driver
instead of init/exit
convert to module_platform_driver instead of init/exit
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Libo chen <libo.chen@huawei.com>
---
drivers/mtd/devices/bcm47xxsflash.c | 20 +-------------------
1 files changed, 1 insertions(+), 19 deletions(-)
--- a/drivers/mtd/devices/bcm47xxsflash.c
+++ b/drivers/mtd/devices/bcm47xxsflash.c
@@ -337,22 +337,4 @@ static struct platform_driver bcma_sflas
* Init
**************************************************/
-static int __init bcm47xxsflash_init(void)
-{
- int err;
-
- err = platform_driver_register(&bcma_sflash_driver);
- if (err)
- pr_err("Failed to register BCMA serial flash driver: %d\n",
- err);
-
- return err;
-}
-
-static void __exit bcm47xxsflash_exit(void)
-{
- platform_driver_unregister(&bcma_sflash_driver);
-}
-
-module_init(bcm47xxsflash_init);
-module_exit(bcm47xxsflash_exit);
+module_platform_driver(bcma_sflash_driver);

469
target/linux/brcm47xx/patches-3.10/070-MIPS-BCM47XX-add-board-detection.patch
View File

@ -1,469 +0,0 @@
commit 74370cf83baefceb83f5f4b7ff5c8e19e7056632
Author: Hauke Mehrtens <hauke@hauke-m.de>
Date: Wed Sep 18 13:29:57 2013 +0200
MIPS: BCM47XX: Add board detection
Detect on which board this code is running based on some nvram
settings. This is needed to start board specific workarounds and
configure the leds and buttons which are on different gpios on every board.
This patches add some boards we have seen, but there are many more.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5840
Patchwork: https://patchwork.linux-mips.org/patch/5855/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -4,4 +4,5 @@
#
obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
+obj-y += board.o
obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o
--- /dev/null
+++ b/arch/mips/bcm47xx/board.c
@@ -0,0 +1,309 @@
+#include <linux/export.h>
+#include <linux/string.h>
+#include <bcm47xx_board.h>
+#include <bcm47xx_nvram.h>
+
+struct bcm47xx_board_type {
+ const enum bcm47xx_board board;
+ const char *name;
+};
+
+struct bcm47xx_board_type_list1 {
+ struct bcm47xx_board_type board;
+ const char *value1;
+};
+
+struct bcm47xx_board_type_list2 {
+ struct bcm47xx_board_type board;
+ const char *value1;
+ const char *value2;
+};
+
+struct bcm47xx_board_type_list3 {
+ struct bcm47xx_board_type board;
+ const char *value1;
+ const char *value2;
+ const char *value3;
+};
+
+struct bcm47xx_board_store {
+ enum bcm47xx_board board;
+ char name[BCM47XX_BOARD_MAX_NAME];
+};
+
+/* model_name */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_model_name[] __initconst = {
+ {{BCM47XX_BOARD_DLINK_DIR130, "D-Link DIR-130"}, "DIR-130"},
+ {{BCM47XX_BOARD_DLINK_DIR330, "D-Link DIR-330"}, "DIR-330"},
+ { {0}, 0},
+};
+
+/* model_no */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_model_no[] __initconst = {
+ {{BCM47XX_BOARD_ASUS_WL700GE, "Asus WL700"}, "WL700"},
+ { {0}, 0},
+};
+
+/* machine_name */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_machine_name[] __initconst = {
+ {{BCM47XX_BOARD_LINKSYS_WRTSL54GS, "Linksys WRTSL54GS"}, "WRTSL54GS"},
+ { {0}, 0},
+};
+
+/* hardware_version */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_hardware_version[] __initconst = {
+ {{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16-"},
+ {{BCM47XX_BOARD_ASUS_WL320GE, "Asus WL320GE"}, "WL320G-"},
+ {{BCM47XX_BOARD_ASUS_WL330GE, "Asus WL330GE"}, "WL330GE-"},
+ {{BCM47XX_BOARD_ASUS_WL500GD, "Asus WL500GD"}, "WL500gd-"},
+ {{BCM47XX_BOARD_ASUS_WL500GPV1, "Asus WL500GP V1"}, "WL500gp-"},
+ {{BCM47XX_BOARD_ASUS_WL500GPV2, "Asus WL500GP V2"}, "WL500GPV2-"},
+ {{BCM47XX_BOARD_ASUS_WL500W, "Asus WL500W"}, "WL500gW-"},
+ {{BCM47XX_BOARD_ASUS_WL520GC, "Asus WL520GC"}, "WL520GC-"},
+ {{BCM47XX_BOARD_ASUS_WL520GU, "Asus WL520GU"}, "WL520GU-"},
+ {{BCM47XX_BOARD_BELKIN_F7D4301, "Belkin F7D4301"}, "F7D4301"},
+ { {0}, 0},
+};
+
+/* productid */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_productid[] __initconst = {
+ {{BCM47XX_BOARD_ASUS_RTAC66U, "Asus RT-AC66U"}, "RT-AC66U"},
+ {{BCM47XX_BOARD_ASUS_RTN10, "Asus RT-N10"}, "RT-N10"},
+ {{BCM47XX_BOARD_ASUS_RTN10D, "Asus RT-N10D"}, "RT-N10D"},
+ {{BCM47XX_BOARD_ASUS_RTN10U, "Asus RT-N10U"}, "RT-N10U"},
+ {{BCM47XX_BOARD_ASUS_RTN12, "Asus RT-N12"}, "RT-N12"},
+ {{BCM47XX_BOARD_ASUS_RTN12B1, "Asus RT-N12B1"}, "RT-N12B1"},
+ {{BCM47XX_BOARD_ASUS_RTN12C1, "Asus RT-N12C1"}, "RT-N12C1"},
+ {{BCM47XX_BOARD_ASUS_RTN12D1, "Asus RT-N12D1"}, "RT-N12D1"},
+ {{BCM47XX_BOARD_ASUS_RTN12HP, "Asus RT-N12HP"}, "RT-N12HP"},
+ {{BCM47XX_BOARD_ASUS_RTN15U, "Asus RT-N15U"}, "RT-N15U"},
+ {{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16"},
+ {{BCM47XX_BOARD_ASUS_RTN53, "Asus RT-N53"}, "RT-N53"},
+ {{BCM47XX_BOARD_ASUS_RTN66U, "Asus RT-N66U"}, "RT-N66U"},
+ {{BCM47XX_BOARD_ASUS_WL300G, "Asus WL300G"}, "WL300g"},
+ {{BCM47XX_BOARD_ASUS_WLHDD, "Asus WLHDD"}, "WLHDD"},
+ { {0}, 0},
+};
+
+/* ModelId */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_ModelId[] __initconst = {
+ {{BCM47XX_BOARD_DELL_TM2300, "Dell WX-5565"}, "WX-5565"},
+ {{BCM47XX_BOARD_MOTOROLA_WE800G, "Motorola WE800G"}, "WE800G"},
+ {{BCM47XX_BOARD_MOTOROLA_WR850GP, "Motorola WR850GP"}, "WR850GP"},
+ {{BCM47XX_BOARD_MOTOROLA_WR850GV2V3, "Motorola WR850G"}, "WR850G"},
+ { {0}, 0},
+};
+
+/* melco_id or buf1falo_id */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_melco_id[] __initconst = {
+ {{BCM47XX_BOARD_BUFFALO_WBR2_G54, "Buffalo WBR2-G54"}, "29bb0332"},
+ {{BCM47XX_BOARD_BUFFALO_WHR2_A54G54, "Buffalo WHR2-A54G54"}, "290441dd"},
+ {{BCM47XX_BOARD_BUFFALO_WHR_G125, "Buffalo WHR-G125"}, "32093"},
+ {{BCM47XX_BOARD_BUFFALO_WHR_G54S, "Buffalo WHR-G54S"}, "30182"},
+ {{BCM47XX_BOARD_BUFFALO_WHR_HP_G54, "Buffalo WHR-HP-G54"}, "30189"},
+ {{BCM47XX_BOARD_BUFFALO_WLA2_G54L, "Buffalo WLA2-G54L"}, "29129"},
+ {{BCM47XX_BOARD_BUFFALO_WZR_G300N, "Buffalo WZR-G300N"}, "31120"},
+ {{BCM47XX_BOARD_BUFFALO_WZR_RS_G54, "Buffalo WZR-RS-G54"}, "30083"},
+ {{BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP, "Buffalo WZR-RS-G54HP"}, "30103"},
+ { {0}, 0},
+};
+
+/* boot_hw_model, boot_hw_ver */
+static const
+struct bcm47xx_board_type_list2 bcm47xx_board_list_boot_hw[] __initconst = {
+ /* like WRT160N v3.0 */
+ {{BCM47XX_BOARD_CISCO_M10V1, "Cisco M10"}, "M10", "1.0"},
+ /* like WRT310N v2.0 */
+ {{BCM47XX_BOARD_CISCO_M20V1, "Cisco M20"}, "M20", "1.0"},
+ {{BCM47XX_BOARD_LINKSYS_E900V1, "Linksys E900 V1"}, "E900", "1.0"},
+ /* like WRT160N v3.0 */
+ {{BCM47XX_BOARD_LINKSYS_E1000V1, "Linksys E1000 V1"}, "E100", "1.0"},
+ {{BCM47XX_BOARD_LINKSYS_E1000V2, "Linksys E1000 V2"}, "E1000", "2.0"},
+ {{BCM47XX_BOARD_LINKSYS_E1000V21, "Linksys E1000 V2.1"}, "E1000", "2.1"},
+ {{BCM47XX_BOARD_LINKSYS_E1200V2, "Linksys E1200 V2"}, "E1200", "2.0"},
+ {{BCM47XX_BOARD_LINKSYS_E2000V1, "Linksys E2000 V1"}, "Linksys E2000", "1.0"},
+ /* like WRT610N v2.0 */
+ {{BCM47XX_BOARD_LINKSYS_E3000V1, "Linksys E3000 V1"}, "E300", "1.0"},
+ {{BCM47XX_BOARD_LINKSYS_E3200V1, "Linksys E3200 V1"}, "E3200", "1.0"},
+ {{BCM47XX_BOARD_LINKSYS_E4200V1, "Linksys E4200 V1"}, "E4200", "1.0"},
+ {{BCM47XX_BOARD_LINKSYS_WRT150NV11, "Linksys WRT150N V1.1"}, "WRT150N", "1.1"},
+ {{BCM47XX_BOARD_LINKSYS_WRT150NV1, "Linksys WRT150N V1"}, "WRT150N", "1"},
+ {{BCM47XX_BOARD_LINKSYS_WRT160NV1, "Linksys WRT160N V1"}, "WRT160N", "1.0"},
+ {{BCM47XX_BOARD_LINKSYS_WRT160NV3, "Linksys WRT160N V3"}, "WRT160N", "3.0"},
+ {{BCM47XX_BOARD_LINKSYS_WRT300NV11, "Linksys WRT300N V1.1"}, "WRT300N", "1.1"},
+ {{BCM47XX_BOARD_LINKSYS_WRT310NV1, "Linksys WRT310N V1"}, "WRT310N", "1.0"},
+ {{BCM47XX_BOARD_LINKSYS_WRT310NV2, "Linksys WRT310N V2"}, "WRT310N", "2.0"},
+ {{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"},
+ {{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"},
+ {{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"},
+ { {0}, 0},
+};
+
+/* board_id */
+static const
+struct bcm47xx_board_type_list1 bcm47xx_board_list_board_id[] __initconst = {
+ {{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WNDR3300, "Netgear WNDR3300"}, "U12H093T00_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WNDR3400V1, "Netgear WNDR3400 V1"}, "U12H155T00_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WNDR3400V2, "Netgear WNDR3400 V2"}, "U12H187T00_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WNDR3400VCNA, "Netgear WNDR3400 Vcna"}, "U12H155T01_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WNDR3700V3, "Netgear WNDR3700 V3"}, "U12H194T00_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WNDR4000, "Netgear WNDR4000"}, "U12H181T00_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WNDR4500V1, "Netgear WNDR4500 V1"}, "U12H189T00_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WNDR4500V2, "Netgear WNDR4500 V2"}, "U12H224T00_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WNR2000, "Netgear WNR2000"}, "U12H114T00_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "U12H136T99_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WNR3500U, "Netgear WNR3500U"}, "U12H136T00_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WNR3500V2, "Netgear WNR3500 V2"}, "U12H127T00_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WNR3500V2VC, "Netgear WNR3500 V2vc"}, "U12H127T70_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WNR834BV2, "Netgear WNR834B V2"}, "U12H081T00_NETGEAR"},
+ { {0}, 0},
+};
+
+/* boardtype, boardnum, boardrev */
+static const
+struct bcm47xx_board_type_list3 bcm47xx_board_list_board[] __initconst = {
+ {{BCM47XX_BOARD_HUAWEI_E970, "Huawei E970"}, "0x048e", "0x5347", "0x11"},
+ {{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
+ {{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
+ { {0}, 0},
+};
+
+static const
+struct bcm47xx_board_type bcm47xx_board_unknown[] __initconst = {
+ {BCM47XX_BOARD_UNKNOWN, "Unknown Board"},
+};
+
+static struct bcm47xx_board_store bcm47xx_board = {BCM47XX_BOARD_NO, "Unknown Board"};
+
+static __init const struct bcm47xx_board_type *bcm47xx_board_get_nvram(void)
+{
+ char buf1[30];
+ char buf2[30];
+ char buf3[30];
+ const struct bcm47xx_board_type_list1 *e1;
+ const struct bcm47xx_board_type_list2 *e2;
+ const struct bcm47xx_board_type_list3 *e3;
+
+ if (bcm47xx_nvram_getenv("model_name", buf1, sizeof(buf1)) >= 0) {
+ for (e1 = bcm47xx_board_list_model_name; e1->value1; e1++) {
+ if (!strcmp(buf1, e1->value1))
+ return &e1->board;
+ }
+ }
+
+ if (bcm47xx_nvram_getenv("model_no", buf1, sizeof(buf1)) >= 0) {
+ for (e1 = bcm47xx_board_list_model_no; e1->value1; e1++) {
+ if (strstarts(buf1, e1->value1))
+ return &e1->board;
+ }
+ }
+
+ if (bcm47xx_nvram_getenv("machine_name", buf1, sizeof(buf1)) >= 0) {
+ for (e1 = bcm47xx_board_list_machine_name; e1->value1; e1++) {
+ if (strstarts(buf1, e1->value1))
+ return &e1->board;
+ }
+ }
+
+ if (bcm47xx_nvram_getenv("hardware_version", buf1, sizeof(buf1)) >= 0) {
+ for (e1 = bcm47xx_board_list_hardware_version; e1->value1; e1++) {
+ if (strstarts(buf1, e1->value1))
+ return &e1->board;
+ }
+ }
+
+ if (bcm47xx_nvram_getenv("productid", buf1, sizeof(buf1)) >= 0) {
+ for (e1 = bcm47xx_board_list_productid; e1->value1; e1++) {
+ if (!strcmp(buf1, e1->value1))
+ return &e1->board;
+ }
+ }
+
+ if (bcm47xx_nvram_getenv("ModelId", buf1, sizeof(buf1)) >= 0) {
+ for (e1 = bcm47xx_board_list_ModelId; e1->value1; e1++) {
+ if (!strcmp(buf1, e1->value1))
+ return &e1->board;
+ }
+ }
+
+ if (bcm47xx_nvram_getenv("melco_id", buf1, sizeof(buf1)) >= 0 ||
+ bcm47xx_nvram_getenv("buf1falo_id", buf1, sizeof(buf1)) >= 0) {
+ /* buffalo hardware, check id for specific hardware matches */
+ for (e1 = bcm47xx_board_list_melco_id; e1->value1; e1++) {
+ if (!strcmp(buf1, e1->value1))
+ return &e1->board;
+ }
+ }
+
+ if (bcm47xx_nvram_getenv("boot_hw_model", buf1, sizeof(buf1)) >= 0 &&
+ bcm47xx_nvram_getenv("boot_hw_ver", buf2, sizeof(buf2)) >= 0) {
+ for (e2 = bcm47xx_board_list_boot_hw; e2->value1; e2++) {
+ if (!strcmp(buf1, e2->value1) &&
+ !strcmp(buf2, e2->value2))
+ return &e2->board;
+ }
+ }
+
+ if (bcm47xx_nvram_getenv("board_id", buf1, sizeof(buf1)) >= 0) {
+ for (e1 = bcm47xx_board_list_board_id; e1->value1; e1++) {
+ if (!strcmp(buf1, e1->value1))
+ return &e1->board;
+ }
+ }
+
+ if (bcm47xx_nvram_getenv("boardtype", buf1, sizeof(buf1)) >= 0 &&
+ bcm47xx_nvram_getenv("boardnum", buf2, sizeof(buf2)) >= 0 &&
+ bcm47xx_nvram_getenv("boardrev", buf3, sizeof(buf3)) >= 0) {
+ for (e3 = bcm47xx_board_list_board; e3->value1; e3++) {
+ if (!strcmp(buf1, e3->value1) &&
+ !strcmp(buf2, e3->value2) &&
+ !strcmp(buf3, e3->value3))
+ return &e3->board;
+ }
+ }
+ return bcm47xx_board_unknown;
+}
+
+void __init bcm47xx_board_detect(void)
+{
+ int err;
+ char buf[10];
+ const struct bcm47xx_board_type *board_detected;
+
+ if (bcm47xx_board.board != BCM47XX_BOARD_NO)
+ return;
+
+ /* check if the nvram is available */
+ err = bcm47xx_nvram_getenv("boardtype", buf, sizeof(buf));
+
+ /* init of nvram failed, probably too early now */
+ if (err == -ENXIO) {
+ return;
+ }
+
+ board_detected = bcm47xx_board_get_nvram();
+ bcm47xx_board.board = board_detected->board;
+ strlcpy(bcm47xx_board.name, board_detected->name,
+ BCM47XX_BOARD_MAX_NAME);
+}
+
+enum bcm47xx_board bcm47xx_board_get(void)
+{
+ return bcm47xx_board.board;
+}
+EXPORT_SYMBOL(bcm47xx_board_get);
+
+const char *bcm47xx_board_get_name(void)
+{
+ return bcm47xx_board.name;
+}
+EXPORT_SYMBOL(bcm47xx_board_get_name);
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -36,6 +36,7 @@
#include <asm/time.h>
#include <bcm47xx.h>
#include <bcm47xx_nvram.h>
+#include <bcm47xx_board.h>
union bcm47xx_bus bcm47xx_bus;
EXPORT_SYMBOL(bcm47xx_bus);
@@ -221,6 +222,7 @@ void __init plat_mem_setup(void)
_machine_restart = bcm47xx_machine_restart;
_machine_halt = bcm47xx_machine_halt;
pm_power_off = bcm47xx_machine_halt;
+ bcm47xx_board_detect();
}
static int __init bcm47xx_register_bus_complete(void)
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -0,0 +1,110 @@
+#ifndef __BCM47XX_BOARD_H
+#define __BCM47XX_BOARD_H
+
+enum bcm47xx_board {
+ BCM47XX_BOARD_ASUS_RTAC66U,
+ BCM47XX_BOARD_ASUS_RTN10,
+ BCM47XX_BOARD_ASUS_RTN10D,
+ BCM47XX_BOARD_ASUS_RTN10U,
+ BCM47XX_BOARD_ASUS_RTN12,
+ BCM47XX_BOARD_ASUS_RTN12B1,
+ BCM47XX_BOARD_ASUS_RTN12C1,
+ BCM47XX_BOARD_ASUS_RTN12D1,
+ BCM47XX_BOARD_ASUS_RTN12HP,
+ BCM47XX_BOARD_ASUS_RTN15U,
+ BCM47XX_BOARD_ASUS_RTN16,
+ BCM47XX_BOARD_ASUS_RTN53,
+ BCM47XX_BOARD_ASUS_RTN66U,
+ BCM47XX_BOARD_ASUS_WL300G,
+ BCM47XX_BOARD_ASUS_WL320GE,
+ BCM47XX_BOARD_ASUS_WL330GE,
+ BCM47XX_BOARD_ASUS_WL500GD,
+ BCM47XX_BOARD_ASUS_WL500GPV1,
+ BCM47XX_BOARD_ASUS_WL500GPV2,
+ BCM47XX_BOARD_ASUS_WL500W,
+ BCM47XX_BOARD_ASUS_WL520GC,
+ BCM47XX_BOARD_ASUS_WL520GU,
+ BCM47XX_BOARD_ASUS_WL700GE,
+ BCM47XX_BOARD_ASUS_WLHDD,
+
+ BCM47XX_BOARD_BELKIN_F7D4301,
+
+ BCM47XX_BOARD_BUFFALO_WBR2_G54,
+ BCM47XX_BOARD_BUFFALO_WHR2_A54G54,
+ BCM47XX_BOARD_BUFFALO_WHR_G125,
+ BCM47XX_BOARD_BUFFALO_WHR_G54S,
+ BCM47XX_BOARD_BUFFALO_WHR_HP_G54,
+ BCM47XX_BOARD_BUFFALO_WLA2_G54L,
+ BCM47XX_BOARD_BUFFALO_WZR_G300N,
+ BCM47XX_BOARD_BUFFALO_WZR_RS_G54,
+ BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP,
+
+ BCM47XX_BOARD_CISCO_M10V1,
+ BCM47XX_BOARD_CISCO_M20V1,
+
+ BCM47XX_BOARD_DELL_TM2300,
+
+ BCM47XX_BOARD_DLINK_DIR130,
+ BCM47XX_BOARD_DLINK_DIR330,
+
+ BCM47XX_BOARD_HUAWEI_E970,
+
+ BCM47XX_BOARD_LINKSYS_E900V1,
+ BCM47XX_BOARD_LINKSYS_E1000V1,
+ BCM47XX_BOARD_LINKSYS_E1000V2,
+ BCM47XX_BOARD_LINKSYS_E1000V21,
+ BCM47XX_BOARD_LINKSYS_E1200V2,
+ BCM47XX_BOARD_LINKSYS_E2000V1,
+ BCM47XX_BOARD_LINKSYS_E3000V1,
+ BCM47XX_BOARD_LINKSYS_E3200V1,
+ BCM47XX_BOARD_LINKSYS_E4200V1,
+ BCM47XX_BOARD_LINKSYS_WRT150NV1,
+ BCM47XX_BOARD_LINKSYS_WRT150NV11,
+ BCM47XX_BOARD_LINKSYS_WRT160NV1,
+ BCM47XX_BOARD_LINKSYS_WRT160NV3,
+ BCM47XX_BOARD_LINKSYS_WRT300NV11,
+ BCM47XX_BOARD_LINKSYS_WRT310NV1,
+ BCM47XX_BOARD_LINKSYS_WRT310NV2,
+ BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
+ BCM47XX_BOARD_LINKSYS_WRT610NV1,
+ BCM47XX_BOARD_LINKSYS_WRT610NV2,
+ BCM47XX_BOARD_LINKSYS_WRTSL54GS,
+
+ BCM47XX_BOARD_MOTOROLA_WE800G,
+ BCM47XX_BOARD_MOTOROLA_WR850GP,
+ BCM47XX_BOARD_MOTOROLA_WR850GV2V3,
+
+ BCM47XX_BOARD_NETGEAR_WGR614V8,
+ BCM47XX_BOARD_NETGEAR_WGR614V9,
+ BCM47XX_BOARD_NETGEAR_WNDR3300,
+ BCM47XX_BOARD_NETGEAR_WNDR3400V1,
+ BCM47XX_BOARD_NETGEAR_WNDR3400V2,
+ BCM47XX_BOARD_NETGEAR_WNDR3400VCNA,
+ BCM47XX_BOARD_NETGEAR_WNDR3700V3,
+ BCM47XX_BOARD_NETGEAR_WNDR4000,
+ BCM47XX_BOARD_NETGEAR_WNDR4500V1,
+ BCM47XX_BOARD_NETGEAR_WNDR4500V2,
+ BCM47XX_BOARD_NETGEAR_WNR2000,
+ BCM47XX_BOARD_NETGEAR_WNR3500L,
+ BCM47XX_BOARD_NETGEAR_WNR3500U,
+ BCM47XX_BOARD_NETGEAR_WNR3500V2,
+ BCM47XX_BOARD_NETGEAR_WNR3500V2VC,
+ BCM47XX_BOARD_NETGEAR_WNR834BV2,
+
+ BCM47XX_BOARD_PHICOMM_M1,
+
+ BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE,
+
+ BCM47XX_BOARD_ZTE_H218N,
+
+ BCM47XX_BOARD_UNKNOWN,
+ BCM47XX_BOARD_NO,
+};
+
+#define BCM47XX_BOARD_MAX_NAME 30
+
+void bcm47xx_board_detect(void);
+enum bcm47xx_board bcm47xx_board_get(void);
+const char *bcm47xx_board_get_name(void);
+
+#endif /* __BCM47XX_BOARD_H */

55
target/linux/brcm47xx/patches-3.10/071-MIPS-BCM47XX-print-board-name-in-proc-cpuinfo.patch
View File

@ -1,55 +0,0 @@
commit 7ad3b82f9d80ef8919dcfdfe7561e1a83e09c6bd
Author: Hauke Mehrtens <hauke@hauke-m.de>
Date: Wed Sep 18 13:29:58 2013 +0200
MIPS: BCM47XX: Print board name in /proc/cpuinfo
Do not print the constant system type "Broadcom BCM47XX" but print the
name of the actual SoC in use and the detected board.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5839/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -32,12 +32,37 @@
#include <asm/bootinfo.h>
#include <asm/fw/cfe/cfe_api.h>
#include <asm/fw/cfe/cfe_error.h>
+#include <bcm47xx.h>
+#include <bcm47xx_board.h>
static int cfe_cons_handle;
+static u16 get_chip_id(void)
+{
+ switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ return bcm47xx_bus.ssb.chip_id;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ return bcm47xx_bus.bcma.bus.chipinfo.id;
+#endif
+ }
+ return 0;
+}
+
const char *get_system_type(void)
{
- return "Broadcom BCM47XX";
+ static char buf[50];
+ u16 chip_id = get_chip_id();
+
+ snprintf(buf, sizeof(buf),
+ (chip_id > 0x9999) ? "Broadcom BCM%d (%s)" :
+ "Broadcom BCM%04X (%s)",
+ chip_id, bcm47xx_board_get_name());
+
+ return buf;
}
void prom_putchar(char c)

90
target/linux/brcm47xx/patches-3.10/072-MIPS-BCM47XX-only-print-SoC-name-in-system-type-in-c.patch
View File

@ -1,90 +0,0 @@
From 17e0ca5d6e08a83eed8dada75af4c0107f162051 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Thu, 19 Sep 2013 23:40:09 +0200
Subject: [PATCH 018/110] MIPS: BCM47XX: only print SoC name in system type in
cpuinfo
Recently the output of "system type" in /proc/cpuinfo was changed to
Broadcom BCM4730 (Some sample board), but it is better to just print
the SoC name in the "system type" entry. The board name will be added
in the machine entry later.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5865/
---
arch/mips/bcm47xx/prom.c | 31 ++++++++------------------
arch/mips/bcm47xx/setup.c | 2 ++
arch/mips/include/asm/mach-bcm47xx/bcm47xx.h | 2 ++
3 files changed, 13 insertions(+), 22 deletions(-)
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -37,32 +37,19 @@
static int cfe_cons_handle;
-static u16 get_chip_id(void)
-{
- switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
- case BCM47XX_BUS_TYPE_SSB:
- return bcm47xx_bus.ssb.chip_id;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
- case BCM47XX_BUS_TYPE_BCMA:
- return bcm47xx_bus.bcma.bus.chipinfo.id;
-#endif
- }
- return 0;
-}
+static char bcm47xx_system_type[20] = "Broadcom BCM47XX";
const char *get_system_type(void)
{
- static char buf[50];
- u16 chip_id = get_chip_id();
-
- snprintf(buf, sizeof(buf),
- (chip_id > 0x9999) ? "Broadcom BCM%d (%s)" :
- "Broadcom BCM%04X (%s)",
- chip_id, bcm47xx_board_get_name());
+ return bcm47xx_system_type;
+}
- return buf;
+__init void bcm47xx_set_system_type(u16 chip_id)
+{
+ snprintf(bcm47xx_system_type, sizeof(bcm47xx_system_type),
+ (chip_id > 0x9999) ? "Broadcom BCM%d" :
+ "Broadcom BCM%04X",
+ chip_id);
}
void prom_putchar(char c)
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -210,12 +210,14 @@ void __init plat_mem_setup(void)
#ifdef CONFIG_BCM47XX_BCMA
bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;
bcm47xx_register_bcma();
+ bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id);
#endif
} else {
printk(KERN_INFO "bcm47xx: using ssb bus\n");
#ifdef CONFIG_BCM47XX_SSB
bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB;
bcm47xx_register_ssb();
+ bcm47xx_set_system_type(bcm47xx_bus.ssb.chip_id);
#endif
}
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
@@ -56,4 +56,6 @@ void bcm47xx_fill_bcma_boardinfo(struct
const char *prefix);
#endif
+void bcm47xx_set_system_type(u16 chip_id);
+
#endif /* __ASM_BCM47XX_H */

33
target/linux/brcm47xx/patches-3.10/073-MIPS-BCM47XX-print-board-name-in-machine-entry-in-cp.patch
View File

@ -1,33 +0,0 @@
From 6d683038f2155bf0d6f486a1f11a10bbc455da8a Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Thu, 19 Sep 2013 23:40:10 +0200
Subject: [PATCH 019/110] MIPS: BCM47XX: print board name in machine entry in
cpuinfo
This will add the board name to the machine entry in /proc/cpuinfo.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5864/
---
arch/mips/bcm47xx/setup.c | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -32,6 +32,7 @@
#include <linux/ssb/ssb_embedded.h>
#include <linux/bcma/bcma_soc.h>
#include <asm/bootinfo.h>
+#include <asm/prom.h>
#include <asm/reboot.h>
#include <asm/time.h>
#include <bcm47xx.h>
@@ -225,6 +226,7 @@ void __init plat_mem_setup(void)
_machine_halt = bcm47xx_machine_halt;
pm_power_off = bcm47xx_machine_halt;
bcm47xx_board_detect();
+ mips_set_machine_name(bcm47xx_board_get_name());
}
static int __init bcm47xx_register_bus_complete(void)

51
target/linux/brcm47xx/patches-3.10/075-MIPS-BCM47XX-fix-detection-for-some-boards.patch
View File

@ -1,51 +0,0 @@
From 255842a25bf36b7ba585e6cf81d856fa9df66cf2 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri, 3 Jan 2014 20:41:58 +0100
Subject: [PATCH] MIPS: BCM47XX: fix detection for some boards
When a nvram reset was performed from CFE, it sometimes does not
contain the productid value in nvram, but it still contains
hardware_version.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
arch/mips/bcm47xx/board.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -56,6 +56,12 @@ struct bcm47xx_board_type_list1 bcm47xx_
/* hardware_version */
static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_hardware_version[] __initconst = {
+ {{BCM47XX_BOARD_ASUS_RTN10U, "Asus RT-N10U"}, "RTN10U"},
+ {{BCM47XX_BOARD_ASUS_RTN12, "Asus RT-N12"}, "RT-N12"},
+ {{BCM47XX_BOARD_ASUS_RTN12B1, "Asus RT-N12B1"}, "RTN12B1"},
+ {{BCM47XX_BOARD_ASUS_RTN12C1, "Asus RT-N12C1"}, "RTN12C1"},
+ {{BCM47XX_BOARD_ASUS_RTN12D1, "Asus RT-N12D1"}, "RTN12D1"},
+ {{BCM47XX_BOARD_ASUS_RTN12HP, "Asus RT-N12HP"}, "RTN12HP"},
{{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16-"},
{{BCM47XX_BOARD_ASUS_WL320GE, "Asus WL320GE"}, "WL320G-"},
{{BCM47XX_BOARD_ASUS_WL330GE, "Asus WL330GE"}, "WL330GE-"},
@@ -75,12 +81,6 @@ struct bcm47xx_board_type_list1 bcm47xx_
{{BCM47XX_BOARD_ASUS_RTAC66U, "Asus RT-AC66U"}, "RT-AC66U"},
{{BCM47XX_BOARD_ASUS_RTN10, "Asus RT-N10"}, "RT-N10"},
{{BCM47XX_BOARD_ASUS_RTN10D, "Asus RT-N10D"}, "RT-N10D"},
- {{BCM47XX_BOARD_ASUS_RTN10U, "Asus RT-N10U"}, "RT-N10U"},
- {{BCM47XX_BOARD_ASUS_RTN12, "Asus RT-N12"}, "RT-N12"},
- {{BCM47XX_BOARD_ASUS_RTN12B1, "Asus RT-N12B1"}, "RT-N12B1"},
- {{BCM47XX_BOARD_ASUS_RTN12C1, "Asus RT-N12C1"}, "RT-N12C1"},
- {{BCM47XX_BOARD_ASUS_RTN12D1, "Asus RT-N12D1"}, "RT-N12D1"},
- {{BCM47XX_BOARD_ASUS_RTN12HP, "Asus RT-N12HP"}, "RT-N12HP"},
{{BCM47XX_BOARD_ASUS_RTN15U, "Asus RT-N15U"}, "RT-N15U"},
{{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16"},
{{BCM47XX_BOARD_ASUS_RTN53, "Asus RT-N53"}, "RT-N53"},
@@ -174,6 +174,7 @@ struct bcm47xx_board_type_list3 bcm47xx_
{{BCM47XX_BOARD_HUAWEI_E970, "Huawei E970"}, "0x048e", "0x5347", "0x11"},
{{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
{{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
+ {{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "0x04CF", "3500", "02"},
{ {0}, 0},
};

34
target/linux/brcm47xx/patches-3.10/076-MIPS-BCM47XX-add-board-detection-for-Linksys-WRT54GS.patch
View File

@ -1,34 +0,0 @@
From a2da7b7a2cb8319b6383e93d99905cb027252584 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri, 3 Jan 2014 20:41:59 +0100
Subject: [PATCH] MIPS: BCM47XX: add board detection for Linksys WRT54GS V1
This adds board detection for Linksys WRT54GS V1.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
arch/mips/bcm47xx/board.c | 1 +
arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 1 +
2 files changed, 2 insertions(+)
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -175,6 +175,7 @@ struct bcm47xx_board_type_list3 bcm47xx_
{{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
{{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
{{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "0x04CF", "3500", "02"},
+ {{BCM47XX_BOARD_LINKSYS_WRT54GSV1, "Linksys WRT54GS V1"}, "0x0101", "42", "0x10"},
{ {0}, 0},
};
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -66,6 +66,7 @@ enum bcm47xx_board {
BCM47XX_BOARD_LINKSYS_WRT310NV1,
BCM47XX_BOARD_LINKSYS_WRT310NV2,
BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
+ BCM47XX_BOARD_LINKSYS_WRT54GSV1,
BCM47XX_BOARD_LINKSYS_WRT610NV1,
BCM47XX_BOARD_LINKSYS_WRT610NV2,
BCM47XX_BOARD_LINKSYS_WRTSL54GS,

113
target/linux/brcm47xx/patches-3.10/077-MIPS-BCM47XX-fix-sparse-warnings-in-board.c.patch
View File

@ -1,113 +0,0 @@
From ab76ce5c01293f518db823c7089d52586fc1d899 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri, 3 Jan 2014 20:42:00 +0100
Subject: [PATCH] MIPS: BCM47XX: fix sparse warnings in board.c
This fixes the following sparse warnings:
arch/mips/bcm47xx/board.c:39:16: warning: Using plain integer as NULL pointer
arch/mips/bcm47xx/board.c:46:16: warning: Using plain integer as NULL pointer
arch/mips/bcm47xx/board.c:53:16: warning: Using plain integer as NULL pointer
arch/mips/bcm47xx/board.c:78:16: warning: Using plain integer as NULL pointer
arch/mips/bcm47xx/board.c:99:16: warning: Using plain integer as NULL pointer
arch/mips/bcm47xx/board.c:109:16: warning: Using plain integer as NULL pointer
arch/mips/bcm47xx/board.c:124:16: warning: Using plain integer as NULL pointer
arch/mips/bcm47xx/board.c:155:16: warning: Using plain integer as NULL pointer
arch/mips/bcm47xx/board.c:177:16: warning: Using plain integer as NULL pointer
arch/mips/bcm47xx/board.c:189:16: warning: Using plain integer as NULL pointer
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
arch/mips/bcm47xx/board.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -36,21 +36,21 @@ static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_model_name[] __initconst = {
{{BCM47XX_BOARD_DLINK_DIR130, "D-Link DIR-130"}, "DIR-130"},
{{BCM47XX_BOARD_DLINK_DIR330, "D-Link DIR-330"}, "DIR-330"},
- { {0}, 0},
+ { {0}, NULL},
};
/* model_no */
static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_model_no[] __initconst = {
{{BCM47XX_BOARD_ASUS_WL700GE, "Asus WL700"}, "WL700"},
- { {0}, 0},
+ { {0}, NULL},
};
/* machine_name */
static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_machine_name[] __initconst = {
{{BCM47XX_BOARD_LINKSYS_WRTSL54GS, "Linksys WRTSL54GS"}, "WRTSL54GS"},
- { {0}, 0},
+ { {0}, NULL},
};
/* hardware_version */
@@ -72,7 +72,7 @@ struct bcm47xx_board_type_list1 bcm47xx_
{{BCM47XX_BOARD_ASUS_WL520GC, "Asus WL520GC"}, "WL520GC-"},
{{BCM47XX_BOARD_ASUS_WL520GU, "Asus WL520GU"}, "WL520GU-"},
{{BCM47XX_BOARD_BELKIN_F7D4301, "Belkin F7D4301"}, "F7D4301"},
- { {0}, 0},
+ { {0}, NULL},
};
/* productid */
@@ -87,7 +87,7 @@ struct bcm47xx_board_type_list1 bcm47xx_
{{BCM47XX_BOARD_ASUS_RTN66U, "Asus RT-N66U"}, "RT-N66U"},
{{BCM47XX_BOARD_ASUS_WL300G, "Asus WL300G"}, "WL300g"},
{{BCM47XX_BOARD_ASUS_WLHDD, "Asus WLHDD"}, "WLHDD"},
- { {0}, 0},
+ { {0}, NULL},
};
/* ModelId */
@@ -97,7 +97,7 @@ struct bcm47xx_board_type_list1 bcm47xx_
{{BCM47XX_BOARD_MOTOROLA_WE800G, "Motorola WE800G"}, "WE800G"},
{{BCM47XX_BOARD_MOTOROLA_WR850GP, "Motorola WR850GP"}, "WR850GP"},
{{BCM47XX_BOARD_MOTOROLA_WR850GV2V3, "Motorola WR850G"}, "WR850G"},
- { {0}, 0},
+ { {0}, NULL},
};
/* melco_id or buf1falo_id */
@@ -112,7 +112,7 @@ struct bcm47xx_board_type_list1 bcm47xx_
{{BCM47XX_BOARD_BUFFALO_WZR_G300N, "Buffalo WZR-G300N"}, "31120"},
{{BCM47XX_BOARD_BUFFALO_WZR_RS_G54, "Buffalo WZR-RS-G54"}, "30083"},
{{BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP, "Buffalo WZR-RS-G54HP"}, "30103"},
- { {0}, 0},
+ { {0}, NULL},
};
/* boot_hw_model, boot_hw_ver */
@@ -143,7 +143,7 @@ struct bcm47xx_board_type_list2 bcm47xx_
{{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"},
{{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"},
{{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"},
- { {0}, 0},
+ { {0}, NULL},
};
/* board_id */
@@ -165,7 +165,7 @@ struct bcm47xx_board_type_list1 bcm47xx_
{{BCM47XX_BOARD_NETGEAR_WNR3500V2, "Netgear WNR3500 V2"}, "U12H127T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNR3500V2VC, "Netgear WNR3500 V2vc"}, "U12H127T70_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNR834BV2, "Netgear WNR834B V2"}, "U12H081T00_NETGEAR"},
- { {0}, 0},
+ { {0}, NULL},
};
/* boardtype, boardnum, boardrev */
@@ -176,7 +176,7 @@ struct bcm47xx_board_type_list3 bcm47xx_
{{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
{{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "0x04CF", "3500", "02"},
{{BCM47XX_BOARD_LINKSYS_WRT54GSV1, "Linksys WRT54GS V1"}, "0x0101", "42", "0x10"},
- { {0}, 0},
+ { {0}, NULL},
};
static const

124
target/linux/brcm47xx/patches-3.10/080-MIPS-Add-8250-16550-serial-early-printk-driver.patch
View File

@ -1,124 +0,0 @@
commit 0a76092a63809a0e72e3e9552acadf42869c0293
Author: Yoichi Yuasa <yuasa@linux-mips.org>
Date: Mon Feb 8 20:59:39 2010 +0900
MIPS: Add 8250/16550 serial early printk driver
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/947/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -20,6 +20,14 @@ config EARLY_PRINTK
doesn't cooperate with an X server. You should normally say N here,
unless you want to debug such a crash.
+config EARLY_PRINTK_8250
+ bool "8250/16550 and compatible serial early printk driver"
+ depends on EARLY_PRINTK
+ default n
+ help
+ If you say Y here, it will be possible to use a 8250/16550 serial
+ port as the boot console.
+
config CMDLINE_BOOL
bool "Built-in kernel command line"
default n
--- a/arch/mips/include/asm/setup.h
+++ b/arch/mips/include/asm/setup.h
@@ -5,6 +5,14 @@
extern void setup_early_printk(void);
+#ifdef CONFIG_EARLY_PRINTK_8250
+extern void setup_8250_early_printk_port(unsigned long base,
+ unsigned int reg_shift, unsigned int timeout);
+#else
+static inline void setup_8250_early_printk_port(unsigned long base,
+ unsigned int reg_shift, unsigned int timeout) {}
+#endif
+
extern void set_handler(unsigned long offset, void *addr, unsigned long len);
extern void set_uncached_handler(unsigned long offset, void *addr, unsigned long len);
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -84,6 +84,7 @@ obj-$(CONFIG_GPIO_TXX9) += gpio_txx9.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+obj-$(CONFIG_EARLY_PRINTK_8250) += early_printk_8250.o
obj-$(CONFIG_SPINLOCK_TEST) += spinlock_test.o
obj-$(CONFIG_MIPS_MACHINE) += mips_machine.o
--- /dev/null
+++ b/arch/mips/kernel/early_printk_8250.c
@@ -0,0 +1,66 @@
+/*
+ * 8250/16550-type serial ports prom_putchar()
+ *
+ * Copyright (C) 2010 Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+
+static void __iomem *serial8250_base;
+static unsigned int serial8250_reg_shift;
+static unsigned int serial8250_tx_timeout;
+
+void setup_8250_early_printk_port(unsigned long base, unsigned int reg_shift,
+ unsigned int timeout)
+{
+ serial8250_base = (void __iomem *)base;
+ serial8250_reg_shift = reg_shift;
+ serial8250_tx_timeout = timeout;
+}
+
+static inline u8 serial_in(int offset)
+{
+ return readb(serial8250_base + (offset << serial8250_reg_shift));
+}
+
+static inline void serial_out(int offset, char value)
+{
+ writeb(value, serial8250_base + (offset << serial8250_reg_shift));
+}
+
+void prom_putchar(char c)
+{
+ unsigned int timeout;
+ int status, bits;
+
+ if (!serial8250_base)
+ return;
+
+ timeout = serial8250_tx_timeout;
+ bits = UART_LSR_TEMT | UART_LSR_THRE;
+
+ do {
+ status = serial_in(UART_LSR);
+
+ if (--timeout == 0)
+ break;
+ } while ((status & bits) != bits);
+
+ if (timeout)
+ serial_out(UART_TX, c);
+}

151
target/linux/brcm47xx/patches-3.10/081-MIPS-BCM47XX-Remove-CFE-support.patch
View File

@ -1,151 +0,0 @@
commit 808fe9c2fa81a6b3e20fe813d5410e7fd6606efa
Author: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sun Jul 18 15:11:26 2010 +0200
MIPS: BCM47XX: Remove CFE support
bcm47xx only uses the CFE code for early print to a console, but that
is also possible with a early print serial 8250 driver.
The CFE api init causes hangs somewhere in prom_init_cfe() on some
devices like the Buffalo WHR-HP-G54 and the Asus WL-520GU.
This was reported in https://dev.openwrt.org/ticket/4061 and
https://forum.openwrt.org/viewtopic.php?id=17063
This will remove all the CFE handling code from bcm47xx.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -112,13 +112,11 @@ config BCM47XX
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
- select FW_CFE
select HW_HAS_PCI
select IRQ_CPU
select NO_EXCEPT_FILL
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_HAS_EARLY_PRINTK
help
Support for BCM47XX based boards
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -30,12 +30,9 @@
#include <linux/spinlock.h>
#include <linux/smp.h>
#include <asm/bootinfo.h>
-#include <asm/fw/cfe/cfe_api.h>
-#include <asm/fw/cfe/cfe_error.h>
#include <bcm47xx.h>
#include <bcm47xx_board.h>
-static int cfe_cons_handle;
static char bcm47xx_system_type[20] = "Broadcom BCM47XX";
@@ -52,91 +49,6 @@ __init void bcm47xx_set_system_type(u16
chip_id);
}
-void prom_putchar(char c)
-{
- while (cfe_write(cfe_cons_handle, &c, 1) == 0)
- ;
-}
-
-static __init void prom_init_cfe(void)
-{
- uint32_t cfe_ept;
- uint32_t cfe_handle;
- uint32_t cfe_eptseal;
- int argc = fw_arg0;
- char **envp = (char **) fw_arg2;
- int *prom_vec = (int *) fw_arg3;
-
- /*
- * Check if a loader was used; if NOT, the 4 arguments are
- * what CFE gives us (handle, 0, EPT and EPTSEAL)
- */
- if (argc < 0) {
- cfe_handle = (uint32_t)argc;
- cfe_ept = (uint32_t)envp;
- cfe_eptseal = (uint32_t)prom_vec;
- } else {
- if ((int)prom_vec < 0) {
- /*
- * Old loader; all it gives us is the handle,
- * so use the "known" entrypoint and assume
- * the seal.
- */
- cfe_handle = (uint32_t)prom_vec;
- cfe_ept = 0xBFC00500;
- cfe_eptseal = CFE_EPTSEAL;
- } else {
- /*
- * Newer loaders bundle the handle/ept/eptseal
- * Note: prom_vec is in the loader's useg
- * which is still alive in the TLB.
- */
- cfe_handle = prom_vec[0];
- cfe_ept = prom_vec[2];
- cfe_eptseal = prom_vec[3];
- }
- }
-
- if (cfe_eptseal != CFE_EPTSEAL) {
- /* too early for panic to do any good */
- printk(KERN_ERR "CFE's entrypoint seal doesn't match.");
- while (1) ;
- }
-
- cfe_init(cfe_handle, cfe_ept);
-}
-
-static __init void prom_init_console(void)
-{
- /* Initialize CFE console */
- cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
-}
-
-static __init void prom_init_cmdline(void)
-{
- static char buf[COMMAND_LINE_SIZE] __initdata;
-
- /* Get the kernel command line from CFE */
- if (cfe_getenv("LINUX_CMDLINE", buf, COMMAND_LINE_SIZE) >= 0) {
- buf[COMMAND_LINE_SIZE - 1] = 0;
- strcpy(arcs_cmdline, buf);
- }
-
- /* Force a console handover by adding a console= argument if needed,
- * as CFE is not available anymore later in the boot process. */
- if ((strstr(arcs_cmdline, "console=")) == NULL) {
- /* Try to read the default serial port used by CFE */
- if ((cfe_getenv("BOOT_CONSOLE", buf, COMMAND_LINE_SIZE) < 0)
- || (strncmp("uart", buf, 4)))
- /* Default to uart0 */
- strcpy(buf, "uart0");
-
- /* Compute the new command line */
- snprintf(arcs_cmdline, COMMAND_LINE_SIZE, "%s console=ttyS%c,115200",
- arcs_cmdline, buf[4]);
- }
-}
-
static __init void prom_init_mem(void)
{
unsigned long mem;
@@ -184,9 +96,6 @@ static __init void prom_init_mem(void)
void __init prom_init(void)
{
- prom_init_cfe();
- prom_init_console();
- prom_init_cmdline();
prom_init_mem();
}

53
target/linux/brcm47xx/patches-3.10/082-MIPS-BCM47XX-add-EARLY_PRINTK_8250-support.patch
View File

@ -1,53 +0,0 @@
commit 22250a38f970c173acb1b3fb30e6dce1430f697b
Author: Hauke Mehrtens <hauke@hauke-m.de>
Date: Thu Sep 19 22:48:35 2013 +0200
MIPS: BCM47XX: add EARLY_PRINTK_8250 support
The BCM47xx SoCs have a 8250 serial compatible console at address
0x18000300 and an other at 0x18000400. On most devices 0x18000300 is
wired to some pins on the board, we should use that.
This is the smae for the AI (bcma) and the SB (ssb) bus, this is some
offset on the chip common core.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -117,6 +117,8 @@ config BCM47XX
select NO_EXCEPT_FILL
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_HAS_EARLY_PRINTK
+ select EARLY_PRINTK_8250 if EARLY_PRINTK
help
Support for BCM47XX based boards
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -28,6 +28,8 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
+#include <linux/ssb/ssb_driver_chipcommon.h>
+#include <linux/ssb/ssb_regs.h>
#include <linux/smp.h>
#include <asm/bootinfo.h>
#include <bcm47xx.h>
@@ -94,9 +96,16 @@ static __init void prom_init_mem(void)
add_memory_region(0, mem, BOOT_MEM_RAM);
}
+/*
+ * This is the first serial on the chip common core, it is at this position
+ * for sb (ssb) and ai (bcma) bus.
+ */
+#define BCM47XX_SERIAL_ADDR (SSB_ENUM_BASE + SSB_CHIPCO_UART0_DATA)
+
void __init prom_init(void)
{
prom_init_mem();
+ setup_8250_early_printk_port(CKSEG1ADDR(BCM47XX_SERIAL_ADDR), 0, 0);
}
void __init prom_free_prom_memory(void)

54
target/linux/brcm47xx/patches-3.10/085-MIPS-BCM47XX-Get-GPIO-pin-from-nvram-configuration.patch
View File

@ -1,54 +0,0 @@
commit e49ec29e2da1fd7cdd6d966f389add031a1027a9
Author: Hauke Mehrtens <hauke@hauke-m.de>
Date: Wed Sep 18 13:31:15 2013 +0200
MIPS: BCM47XX: Get GPIO pin from nvram configuration
The nvram contains some gpio configuration for boards. It is stored in
a gpio<number>=name format e.g.
gpio8=wps_button
gpio4=robo_reset
This patches adds a function to parse these entries, so other driver
can use it.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5841/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -190,3 +190,23 @@ int bcm47xx_nvram_getenv(char *name, cha
return -ENOENT;
}
EXPORT_SYMBOL(bcm47xx_nvram_getenv);
+
+int bcm47xx_nvram_gpio_pin(const char *name)
+{
+ int i, err;
+ char nvram_var[10];
+ char buf[30];
+
+ for (i = 0; i < 16; i++) {
+ err = snprintf(nvram_var, sizeof(nvram_var), "gpio%i", i);
+ if (err <= 0)
+ continue;
+ err = bcm47xx_nvram_getenv(nvram_var, buf, sizeof(buf));
+ if (err <= 0)
+ continue;
+ if (!strcmp(name, buf))
+ return i;
+ }
+ return -ENOENT;
+}
+EXPORT_SYMBOL(bcm47xx_nvram_gpio_pin);
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h
@@ -48,4 +48,6 @@ static inline void bcm47xx_nvram_parse_m
printk(KERN_WARNING "Can not parse mac address: %s\n", buf);
}
+int bcm47xx_nvram_gpio_pin(const char *name);
+
#endif /* __BCM47XX_NVRAM_H */

57
target/linux/brcm47xx/patches-3.10/090-MIPS-BCM47XX-fix-clock-detection-for-BCM5354-with-20.patch
View File

@ -1,57 +0,0 @@
commit 0388a0410d590a6c239c1cfaa7d49bffd4ed1101
Author: Hauke Mehrtens <hauke@hauke-m.de>
Date: Wed Sep 18 13:32:59 2013 +0200
MIPS: BCM47XX: Fix clock detection for BCM5354 with 200MHz clock
Some BCM5354 SoCs are running at 200MHz, but it is not possible to read
the clock from a register like it is done on some other SoC in ssb and
bcma. These devices should have a clkfreq nvram configuration value set
to 200, read it and set the clock to the correct value.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5842/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
--- a/arch/mips/bcm47xx/time.c
+++ b/arch/mips/bcm47xx/time.c
@@ -27,10 +27,14 @@
#include <linux/ssb/ssb.h>
#include <asm/time.h>
#include <bcm47xx.h>
+#include <bcm47xx_nvram.h>
void __init plat_time_init(void)
{
unsigned long hz = 0;
+ u16 chip_id = 0;
+ char buf[10];
+ int len;
/*
* Use deterministic values for initial counter interrupt
@@ -43,15 +47,23 @@ void __init plat_time_init(void)
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
+ chip_id = bcm47xx_bus.ssb.chip_id;
break;
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
hz = bcma_cpu_clock(&bcm47xx_bus.bcma.bus.drv_mips) / 2;
+ chip_id = bcm47xx_bus.bcma.bus.chipinfo.id;
break;
#endif
}
+ if (chip_id == 0x5354) {
+ len = bcm47xx_nvram_getenv("clkfreq", buf, sizeof(buf));
+ if (len >= 0 && !strncmp(buf, "200", 4))
+ hz = 100000000;
+ }
+
if (!hz)
hz = 100000000;

49
target/linux/brcm47xx/patches-3.10/091-MIPS-BCM47XX-fix-detected-clock-on-Asus-WL520GC-and-.patch
View File

@ -1,49 +0,0 @@
commit 935e93fcc022ff7be7046d2435ce6441e260abfb
Author: Hauke Mehrtens <hauke@hauke-m.de>
Date: Wed Sep 18 13:33:00 2013 +0200
MIPS: BCM47XX: Fix detected clock on Asus WL520GC and WL520GU
The Asus WL520GC and WL520GU are based on the BCM5354 and clocked at
200MHz, but they do not have a clkfreq nvram variable set to the
correct value. This adds a workaround for these devices.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5843/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
--- a/arch/mips/bcm47xx/time.c
+++ b/arch/mips/bcm47xx/time.c
@@ -28,6 +28,7 @@
#include <asm/time.h>
#include <bcm47xx.h>
#include <bcm47xx_nvram.h>
+#include <bcm47xx_board.h>
void __init plat_time_init(void)
{
@@ -35,6 +36,7 @@ void __init plat_time_init(void)
u16 chip_id = 0;
char buf[10];
int len;
+ enum bcm47xx_board board = bcm47xx_board_get();
/*
* Use deterministic values for initial counter interrupt
@@ -64,6 +66,15 @@ void __init plat_time_init(void)
hz = 100000000;
}
+ switch (board) {
+ case BCM47XX_BOARD_ASUS_WL520GC:
+ case BCM47XX_BOARD_ASUS_WL520GU:
+ hz = 100000000;
+ break;
+ default:
+ break;
+ }
+
if (!hz)
hz = 100000000;

86
target/linux/brcm47xx/patches-3.10/095-MIPS-BCM47XX-Fix-some-very-confused-types-and-data-c.patch
View File

@ -1,86 +0,0 @@
From 855094d7e46eb14c597ca09631cf95a92909982d Mon Sep 17 00:00:00 2001
From: Ilia Mirkin <imirkin@alum.mit.edu>
Date: Fri, 6 Dec 2013 18:56:53 -0500
Subject: [PATCH] MIPS: BCM47XX: Fix some very confused types and data
corruption
Fix nvram_read_alpha2 copying too many bytes over the ssb_sprom
structure. Also fix the arguments of the read_macaddr, although the code
was technically not wrong before due to an extra dereference.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6211/
---
arch/mips/bcm47xx/sprom.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
--- a/arch/mips/bcm47xx/sprom.c
+++ b/arch/mips/bcm47xx/sprom.c
@@ -135,7 +135,7 @@ static void nvram_read_leddc(const char
}
static void nvram_read_macaddr(const char *prefix, const char *name,
- u8 (*val)[6], bool fallback)
+ u8 val[6], bool fallback)
{
char buf[100];
int err;
@@ -144,11 +144,11 @@ static void nvram_read_macaddr(const cha
if (err < 0)
return;
- bcm47xx_nvram_parse_macaddr(buf, *val);
+ bcm47xx_nvram_parse_macaddr(buf, val);
}
static void nvram_read_alpha2(const char *prefix, const char *name,
- char (*val)[2], bool fallback)
+ char val[2], bool fallback)
{
char buf[10];
int err;
@@ -162,7 +162,7 @@ static void nvram_read_alpha2(const char
pr_warn("alpha2 is too long %s\n", buf);
return;
}
- memcpy(val, buf, sizeof(val));
+ memcpy(val, buf, 2);
}
static void bcm47xx_fill_sprom_r1234589(struct ssb_sprom *sprom,
@@ -181,7 +181,7 @@ static void bcm47xx_fill_sprom_r1234589(
fallback);
nvram_read_s8(prefix, NULL, "ag1", &sprom->antenna_gain.a1, 0,
fallback);
- nvram_read_alpha2(prefix, "ccode", &sprom->alpha2, fallback);
+ nvram_read_alpha2(prefix, "ccode", sprom->alpha2, fallback);
}
static void bcm47xx_fill_sprom_r12389(struct ssb_sprom *sprom,
@@ -634,20 +634,20 @@ static void bcm47xx_fill_sprom_path_r45(
static void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom,
const char *prefix, bool fallback)
{
- nvram_read_macaddr(prefix, "et0macaddr", &sprom->et0mac, fallback);
+ nvram_read_macaddr(prefix, "et0macaddr", sprom->et0mac, fallback);
nvram_read_u8(prefix, NULL, "et0mdcport", &sprom->et0mdcport, 0,
fallback);
nvram_read_u8(prefix, NULL, "et0phyaddr", &sprom->et0phyaddr, 0,
fallback);
- nvram_read_macaddr(prefix, "et1macaddr", &sprom->et1mac, fallback);
+ nvram_read_macaddr(prefix, "et1macaddr", sprom->et1mac, fallback);
nvram_read_u8(prefix, NULL, "et1mdcport", &sprom->et1mdcport, 0,
fallback);
nvram_read_u8(prefix, NULL, "et1phyaddr", &sprom->et1phyaddr, 0,
fallback);
- nvram_read_macaddr(prefix, "macaddr", &sprom->il0mac, fallback);
- nvram_read_macaddr(prefix, "il0macaddr", &sprom->il0mac, fallback);
+ nvram_read_macaddr(prefix, "macaddr", sprom->il0mac, fallback);
+ nvram_read_macaddr(prefix, "il0macaddr", sprom->il0mac, fallback);
}
static void bcm47xx_fill_board_data(struct ssb_sprom *sprom, const char *prefix,

64
target/linux/brcm47xx/patches-3.10/110-MIPS-BCM47XX-add-vint-irq.patch
View File

@ -1,64 +0,0 @@
From d9e8fd334d85fc8e4a2867655309a60c8de80883 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Wed, 20 Nov 2013 23:03:35 +0100
Subject: [PATCH 18/18] bcm47xx: add cpu_has_vint
---
arch/mips/bcm47xx/Kconfig | 1 +
arch/mips/bcm47xx/irq.c | 24 ++++++++++++++++++++++++
2 files changed, 25 insertions(+)
--- a/arch/mips/bcm47xx/Kconfig
+++ b/arch/mips/bcm47xx/Kconfig
@@ -21,6 +21,7 @@ config BCM47XX_SSB
config BCM47XX_BCMA
bool "BCMA Support for Broadcom BCM47XX"
select SYS_HAS_CPU_MIPS32_R2
+ select CPU_MIPSR2_IRQ_VI
select BCMA
select BCMA_HOST_SOC
select BCMA_DRIVER_MIPS
--- a/arch/mips/bcm47xx/irq.c
+++ b/arch/mips/bcm47xx/irq.c
@@ -25,6 +25,7 @@
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <asm/setup.h>
#include <asm/irq_cpu.h>
#include <bcm47xx.h>
@@ -50,6 +51,18 @@ void plat_irq_dispatch(void)
do_IRQ(6);
}
+#define DEFINE_HWx_IRQDISPATCH(x) \
+ static void bcm47xx_hw ## x ## _irqdispatch(void) \
+ { \
+ do_IRQ(x); \
+ }
+DEFINE_HWx_IRQDISPATCH(2)
+DEFINE_HWx_IRQDISPATCH(3)
+DEFINE_HWx_IRQDISPATCH(4)
+DEFINE_HWx_IRQDISPATCH(5)
+DEFINE_HWx_IRQDISPATCH(6)
+DEFINE_HWx_IRQDISPATCH(7)
+
void __init arch_init_irq(void)
{
#ifdef CONFIG_BCM47XX_BCMA
@@ -64,4 +77,14 @@ void __init arch_init_irq(void)
}
#endif
mips_cpu_irq_init();
+
+ if (cpu_has_vint) {
+ pr_info("Setting up vectored interrupts\n");
+ set_vi_handler(2, bcm47xx_hw2_irqdispatch);
+ set_vi_handler(3, bcm47xx_hw3_irqdispatch);
+ set_vi_handler(4, bcm47xx_hw4_irqdispatch);
+ set_vi_handler(5, bcm47xx_hw5_irqdispatch);
+ set_vi_handler(6, bcm47xx_hw6_irqdispatch);
+ set_vi_handler(7, bcm47xx_hw7_irqdispatch);
+ }
}

95
target/linux/brcm47xx/patches-3.10/111-MIPS-BCM47XX-add-cpu-overwrite.patch
View File

@ -1,95 +0,0 @@
From b27da7f1ee034d32e410faf5ab32fc96424a0c62 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Wed, 20 Nov 2013 22:16:43 +0100
Subject: [PATCH 17/18] add overwrite
---
.../asm/mach-bcm47xx/cpu-feature-overrides.h | 82 ++++++++++++++++++++
1 file changed, 82 insertions(+)
create mode 100644 arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
@@ -0,0 +1,82 @@
+#ifndef __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_tlb 1
+#define cpu_has_4kex 1
+#define cpu_has_3k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_tx39_cache 0
+#define cpu_has_fpu 0
+#define cpu_has_32fpr 0
+#define cpu_has_counter 1
+#if defined(CONFIG_BCM47XX_BCMA) && !defined(CONFIG_BCM47XX_SSB)
+#define cpu_has_watch 1
+#elif defined(CONFIG_BCM47XX_SSB) && !defined(CONFIG_BCM47XX_BCMA)
+#define cpu_has_watch 0
+#endif
+#define cpu_has_divec 1
+#define cpu_has_vce 0
+#define cpu_has_cache_cdex_p 0
+#define cpu_has_cache_cdex_s 0
+#define cpu_has_prefetch 1
+#define cpu_has_mcheck 1
+#define cpu_has_ejtag 1
+#define cpu_has_llsc 1
+
+/* cpu_has_mips16 */
+#define cpu_has_mdmx 0
+#define cpu_has_mips3d 0
+#define cpu_has_rixi 0
+#define cpu_has_mmips 0
+#define cpu_has_smartmips 0
+#define cpu_has_vtag_icache 0
+/* cpu_has_dc_aliases */
+#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_pindexed_dcache 0
+#define cpu_icache_snoops_remote_store 0
+
+#define cpu_has_mips_2 1
+#define cpu_has_mips_3 0
+#define cpu_has_mips32r1 1
+#if defined(CONFIG_BCM47XX_BCMA) && !defined(CONFIG_BCM47XX_SSB)
+#define cpu_has_mips32r2 1
+#elif defined(CONFIG_BCM47XX_SSB) && !defined(CONFIG_BCM47XX_BCMA)
+#define cpu_has_mips32r2 0
+#endif
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+
+#if defined(CONFIG_BCM47XX_BCMA) && !defined(CONFIG_BCM47XX_SSB)
+#define cpu_has_dsp 1
+#define cpu_has_dsp2 1
+#elif defined(CONFIG_BCM47XX_SSB) && !defined(CONFIG_BCM47XX_BCMA)
+#define cpu_has_dsp 0
+#define cpu_has_dsp2 0
+#endif
+#define cpu_has_mipsmt 0
+/* cpu_has_userlocal */
+
+#define cpu_has_nofpuex 0
+#define cpu_has_64bits 0
+#define cpu_has_64bit_zero_reg 0
+#if defined(CONFIG_BCM47XX_BCMA) && !defined(CONFIG_BCM47XX_SSB)
+#define cpu_has_vint 1
+#elif defined(CONFIG_BCM47XX_SSB) && !defined(CONFIG_BCM47XX_BCMA)
+#define cpu_has_vint 0
+#endif
+#define cpu_has_veic 0
+#define cpu_has_inclusive_pcaches 0
+
+#if defined(CONFIG_BCM47XX_BCMA) && !defined(CONFIG_BCM47XX_SSB)
+#define cpu_dcache_line_size() 32
+#define cpu_icache_line_size() 32
+#define cpu_has_perf_cntr_intr_bit 1
+#elif defined(CONFIG_BCM47XX_SSB) && !defined(CONFIG_BCM47XX_BCMA)
+#define cpu_dcache_line_size() 16
+#define cpu_icache_line_size() 16
+#define cpu_has_perf_cntr_intr_bit 0
+#endif
+#define cpu_scache_line_size() 0
+#define cpu_has_vz 0
+
+#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */

160
target/linux/brcm47xx/patches-3.10/120-MIPS-BCM47XX-Prepare-support-for-LEDs.patch
View File

@ -1,160 +0,0 @@
From 98e54a60a7346ef31cb851b670a238ad428b58fe Mon Sep 17 00:00:00 2001
From: Rafa? Mi?ecki <zajec5@gmail.com>
Date: Thu, 2 Jan 2014 13:27:15 +0100
Subject: [PATCH 029/110] MIPS: BCM47XX: Prepare support for LEDs
So far this is mostly just a proof of concept, database consists of a
single device. Creating a nice iterateable array wasn't an option
because devices have different amount of LEDs. And we don't want to
waste memory just because of support for a device with dozens on LEDs.
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6299/
---
arch/mips/bcm47xx/Kconfig | 2 +
arch/mips/bcm47xx/Makefile | 2 +-
arch/mips/bcm47xx/bcm47xx_private.h | 9 +++++
arch/mips/bcm47xx/leds.c | 73 +++++++++++++++++++++++++++++++++++
arch/mips/bcm47xx/setup.c | 6 +++
5 files changed, 91 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/bcm47xx/bcm47xx_private.h
create mode 100644 arch/mips/bcm47xx/leds.c
--- a/arch/mips/bcm47xx/Kconfig
+++ b/arch/mips/bcm47xx/Kconfig
@@ -12,6 +12,7 @@ config BCM47XX_SSB
select SSB_PCICORE_HOSTMODE if PCI
select SSB_DRIVER_GPIO
select GPIOLIB
+ select LEDS_GPIO_REGISTER
default y
help
Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
@@ -29,6 +30,7 @@ config BCM47XX_BCMA
select BCMA_DRIVER_PCI_HOSTMODE if PCI
select BCMA_DRIVER_GPIO
select GPIOLIB
+ select LEDS_GPIO_REGISTER
default y
help
Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -4,5 +4,5 @@
#
obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
-obj-y += board.o
+obj-y += board.o leds.o
obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o
--- /dev/null
+++ b/arch/mips/bcm47xx/bcm47xx_private.h
@@ -0,0 +1,9 @@
+#ifndef LINUX_BCM47XX_PRIVATE_H_
+#define LINUX_BCM47XX_PRIVATE_H_
+
+#include <linux/kernel.h>
+
+/* leds.c */
+void __init bcm47xx_leds_register(void);
+
+#endif
--- /dev/null
+++ b/arch/mips/bcm47xx/leds.c
@@ -0,0 +1,73 @@
+#include "bcm47xx_private.h"
+
+#include <linux/leds.h>
+#include <bcm47xx_board.h>
+
+static const struct gpio_led
+bcm47xx_leds_netgear_wndr4500_v1_leds[] __initconst = {
+ {
+ .name = "bcm47xx:green:wps",
+ .gpio = 1,
+ .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_KEEP,
+ },
+ {
+ .name = "bcm47xx:green:power",
+ .gpio = 2,
+ .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_KEEP,
+ },
+ {
+ .name = "bcm47xx:orange:power",
+ .gpio = 3,
+ .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_KEEP,
+ },
+ {
+ .name = "bcm47xx:green:usb1",
+ .gpio = 8,
+ .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_KEEP,
+ },
+ {
+ .name = "bcm47xx:green:2ghz",
+ .gpio = 9,
+ .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_KEEP,
+ },
+ {
+ .name = "bcm47xx:blue:5ghz",
+ .gpio = 11,
+ .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_KEEP,
+ },
+ {
+ .name = "bcm47xx:green:usb2",
+ .gpio = 14,
+ .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_KEEP,
+ },
+};
+
+static struct gpio_led_platform_data bcm47xx_leds_pdata;
+
+#define bcm47xx_set_pdata(dev_leds) do { \
+ bcm47xx_leds_pdata.leds = dev_leds; \
+ bcm47xx_leds_pdata.num_leds = ARRAY_SIZE(dev_leds); \
+} while (0)
+
+void __init bcm47xx_leds_register(void)
+{
+ enum bcm47xx_board board = bcm47xx_board_get();
+
+ switch (board) {
+ case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
+ bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500_v1_leds);
+ break;
+ default:
+ pr_debug("No LEDs configuration found for this device\n");
+ return;
+ }
+
+ gpio_led_register_device(-1, &bcm47xx_leds_pdata);
+}
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -26,6 +26,8 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include "bcm47xx_private.h"
+
#include <linux/export.h>
#include <linux/types.h>
#include <linux/ssb/ssb.h>
@@ -243,6 +245,9 @@ static int __init bcm47xx_register_bus_c
break;
#endif
}
+
+ bcm47xx_leds_register();
+
return 0;
}
device_initcall(bcm47xx_register_bus_complete);

152
target/linux/brcm47xx/patches-3.10/121-MIPS-BCM47XX-Prepare-support-for-GPIO-buttons.patch
View File

@ -1,152 +0,0 @@
From e352ec3c581df40f159771b30c262c2bc7fb802e Mon Sep 17 00:00:00 2001
From: Rafa? Mi?ecki <zajec5@gmail.com>
Date: Thu, 2 Jan 2014 13:31:32 +0100
Subject: [PATCH 030/110] MIPS: BCM47XX: Prepare support for GPIO buttons
So far this adds support for one Netgear model only, but it's designed
and ready to add many more device. We could hopefully import database
from OpenWrt.
Support for SSB is currently disabled, because SSB doesn't implement IRQ
domain yet.
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6300/
---
arch/mips/bcm47xx/Makefile | 2 +-
arch/mips/bcm47xx/bcm47xx_private.h | 3 ++
arch/mips/bcm47xx/buttons.c | 95 +++++++++++++++++++++++++++++++++++
arch/mips/bcm47xx/setup.c | 1 +
4 files changed, 100 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/bcm47xx/buttons.c
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -4,5 +4,5 @@
#
obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
-obj-y += board.o leds.o
+obj-y += board.o buttons.o leds.o
obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o
--- a/arch/mips/bcm47xx/bcm47xx_private.h
+++ b/arch/mips/bcm47xx/bcm47xx_private.h
@@ -3,6 +3,9 @@
#include <linux/kernel.h>
+/* buttons.c */
+int __init bcm47xx_buttons_register(void);
+
/* leds.c */
void __init bcm47xx_leds_register(void);
--- /dev/null
+++ b/arch/mips/bcm47xx/buttons.c
@@ -0,0 +1,95 @@
+#include "bcm47xx_private.h"
+
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/interrupt.h>
+#include <linux/ssb/ssb_embedded.h>
+#include <bcm47xx_board.h>
+#include <bcm47xx.h>
+
+/**************************************************
+ * Database
+ **************************************************/
+
+static const struct gpio_keys_button
+bcm47xx_buttons_netgear_wndr4500_v1[] __initconst = {
+ {
+ .code = KEY_WPS_BUTTON,
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .code = KEY_RFKILL,
+ .gpio = 5,
+ .active_low = 1,
+ },
+ {
+ .code = KEY_RESTART,
+ .gpio = 6,
+ .active_low = 1,
+ },
+};
+
+/**************************************************
+ * Init
+ **************************************************/
+
+static struct gpio_keys_platform_data bcm47xx_button_pdata;
+
+static struct platform_device bcm47xx_buttons_gpio_keys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &bcm47xx_button_pdata,
+ }
+};
+
+/* Copy data from __initconst */
+static int __init bcm47xx_buttons_copy(const struct gpio_keys_button *buttons,
+ size_t nbuttons)
+{
+ size_t size = nbuttons * sizeof(*buttons);
+
+ bcm47xx_button_pdata.buttons = kmalloc(size, GFP_KERNEL);
+ if (!bcm47xx_button_pdata.buttons)
+ return -ENOMEM;
+ memcpy(bcm47xx_button_pdata.buttons, buttons, size);
+ bcm47xx_button_pdata.nbuttons = nbuttons;
+
+ return 0;
+}
+
+#define bcm47xx_copy_bdata(dev_buttons) \
+ bcm47xx_buttons_copy(dev_buttons, ARRAY_SIZE(dev_buttons));
+
+int __init bcm47xx_buttons_register(void)
+{
+ enum bcm47xx_board board = bcm47xx_board_get();
+ int err;
+
+#ifdef CONFIG_BCM47XX_SSB
+ if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_SSB) {
+ pr_debug("Buttons on SSB are not supported yet.\n");
+ return -ENOTSUPP;
+ }
+#endif
+
+ switch (board) {
+ case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500_v1);
+ break;
+ default:
+ pr_debug("No buttons configuration found for this device\n");
+ return -ENOTSUPP;
+ }
+
+ if (err)
+ return -ENOMEM;
+
+ err = platform_device_register(&bcm47xx_buttons_gpio_keys);
+ if (err) {
+ pr_err("Failed to register platform device: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -246,6 +246,7 @@ static int __init bcm47xx_register_bus_c
#endif
}
+ bcm47xx_buttons_register();
bcm47xx_leds_register();
return 0;

497
target/linux/brcm47xx/patches-3.10/122-MIPS-BCM47XX-Import-buttons-database-from-OpenWrt.patch
View File

@ -1,497 +0,0 @@
From 12dacbcfa86048cc0810fc6b91b3d7329722e59b Mon Sep 17 00:00:00 2001
From: Rafa? Mi?ecki <zajec5@gmail.com>
Date: Thu, 2 Jan 2014 13:37:56 +0100
Subject: [PATCH 031/110] MIPS: BCM47XX: Import buttons database from OpenWrt
This includes all devices from OpenWrt's "diag" that we support in arch
code (we have entries for in enum bcm47xx_board).
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
Acked-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6301/
---
arch/mips/bcm47xx/buttons.c | 456 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 456 insertions(+)
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -11,6 +11,299 @@
* Database
**************************************************/
+#define BCM47XX_GPIO_KEY(_gpio, _code) \
+ { \
+ .code = _code, \
+ .gpio = _gpio, \
+ .active_low = 1, \
+ }
+
+/* Asus */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_rtn12[] __initconst = {
+ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(1, KEY_RESTART),
+ BCM47XX_GPIO_KEY(4, BTN_0), /* Router mode */
+ BCM47XX_GPIO_KEY(5, BTN_1), /* Repeater mode */
+ BCM47XX_GPIO_KEY(6, BTN_2), /* AP mode */
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_rtn16[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(8, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_rtn66u[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(9, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl300g[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl320ge[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl330ge[] __initconst = {
+ BCM47XX_GPIO_KEY(2, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl500gd[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl500gpv1[] __initconst = {
+ BCM47XX_GPIO_KEY(0, KEY_RESTART),
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl500gpv2[] __initconst = {
+ BCM47XX_GPIO_KEY(2, KEY_RESTART),
+ BCM47XX_GPIO_KEY(3, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl500w[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+ BCM47XX_GPIO_KEY(7, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl520gc[] __initconst = {
+ BCM47XX_GPIO_KEY(2, KEY_RESTART),
+ BCM47XX_GPIO_KEY(3, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl520gu[] __initconst = {
+ BCM47XX_GPIO_KEY(2, KEY_RESTART),
+ BCM47XX_GPIO_KEY(3, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl700ge[] __initconst = {
+ BCM47XX_GPIO_KEY(0, KEY_POWER), /* Hard disk power switch */
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON), /* EZSetup */
+ BCM47XX_GPIO_KEY(6, KEY_COPY), /* Copy data from USB to internal disk */
+ BCM47XX_GPIO_KEY(7, KEY_RESTART), /* Hard reset */
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wlhdd[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+/* Huawei */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_huawei_e970[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+/* Belkin */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_belkin_f7d4301[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+ BCM47XX_GPIO_KEY(8, KEY_WPS_BUTTON),
+};
+
+/* Buffalo */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_buffalo_whr2_a54g54[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_buffalo_whr_g125[] __initconst = {
+ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
+ BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_buffalo_whr_g54s[] __initconst = {
+ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
+ BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_buffalo_whr_hp_g54[] __initconst = {
+ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
+ BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_buffalo_wzr_g300n[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_buffalo_wzr_rs_g54[] __initconst = {
+ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_buffalo_wzr_rs_g54hp[] __initconst = {
+ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
+};
+
+/* Dell */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_dell_tm2300[] __initconst = {
+ BCM47XX_GPIO_KEY(0, KEY_RESTART),
+};
+
+/* D-Link */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_dlink_dir130[] __initconst = {
+ BCM47XX_GPIO_KEY(3, KEY_RESTART),
+ BCM47XX_GPIO_KEY(7, KEY_UNKNOWN),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_dlink_dir330[] __initconst = {
+ BCM47XX_GPIO_KEY(3, KEY_RESTART),
+ BCM47XX_GPIO_KEY(7, KEY_UNKNOWN),
+};
+
+/* Linksys */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_e1000v1[] __initconst = {
+ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_e1000v21[] __initconst = {
+ BCM47XX_GPIO_KEY(9, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(10, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_e2000v1[] __initconst = {
+ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(8, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_e3000v1[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_e3200v1[] __initconst = {
+ BCM47XX_GPIO_KEY(5, KEY_RESTART),
+ BCM47XX_GPIO_KEY(8, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_e4200v1[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt150nv1[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt150nv11[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt160nv1[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt160nv3[] __initconst = {
+ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt300nv11[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_UNKNOWN),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt310nv1[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+ BCM47XX_GPIO_KEY(8, KEY_UNKNOWN),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt610nv1[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+ BCM47XX_GPIO_KEY(8, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt610nv2[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+/* Motorola */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_motorola_we800g[] __initconst = {
+ BCM47XX_GPIO_KEY(0, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_motorola_wr850gp[] __initconst = {
+ BCM47XX_GPIO_KEY(5, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_motorola_wr850gv2v3[] __initconst = {
+ BCM47XX_GPIO_KEY(5, KEY_RESTART),
+};
+
+/* Netgear */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_netgear_wndr3400v1[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
+ BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(8, KEY_RFKILL),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_netgear_wndr3700v3[] __initconst = {
+ BCM47XX_GPIO_KEY(2, KEY_RFKILL),
+ BCM47XX_GPIO_KEY(3, KEY_RESTART),
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+};
+
static const struct gpio_keys_button
bcm47xx_buttons_netgear_wndr4500_v1[] __initconst = {
{
@@ -30,6 +323,18 @@ bcm47xx_buttons_netgear_wndr4500_v1[] __
},
};
+static const struct gpio_keys_button
+bcm47xx_buttons_netgear_wnr834bv2[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+/* SimpleTech */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_simpletech_simpleshare[] __initconst = {
+ BCM47XX_GPIO_KEY(0, KEY_RESTART),
+};
+
/**************************************************
* Init
**************************************************/
@@ -74,9 +379,160 @@ int __init bcm47xx_buttons_register(void
#endif
switch (board) {
+ case BCM47XX_BOARD_ASUS_RTN12:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn12);
+ break;
+ case BCM47XX_BOARD_ASUS_RTN16:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn16);
+ break;
+ case BCM47XX_BOARD_ASUS_RTN66U:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn66u);
+ break;
+ case BCM47XX_BOARD_ASUS_WL300G:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl300g);
+ break;
+ case BCM47XX_BOARD_ASUS_WL320GE:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl320ge);
+ break;
+ case BCM47XX_BOARD_ASUS_WL330GE:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl330ge);
+ break;
+ case BCM47XX_BOARD_ASUS_WL500GD:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500gd);
+ break;
+ case BCM47XX_BOARD_ASUS_WL500GPV1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500gpv1);
+ break;
+ case BCM47XX_BOARD_ASUS_WL500GPV2:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500gpv2);
+ break;
+ case BCM47XX_BOARD_ASUS_WL500W:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500w);
+ break;
+ case BCM47XX_BOARD_ASUS_WL520GC:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl520gc);
+ break;
+ case BCM47XX_BOARD_ASUS_WL520GU:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl520gu);
+ break;
+ case BCM47XX_BOARD_ASUS_WL700GE:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl700ge);
+ break;
+ case BCM47XX_BOARD_ASUS_WLHDD:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wlhdd);
+ break;
+
+ case BCM47XX_BOARD_BELKIN_F7D4301:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_belkin_f7d4301);
+ break;
+
+ case BCM47XX_BOARD_BUFFALO_WHR2_A54G54:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_whr2_a54g54);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WHR_G125:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_whr_g125);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WHR_G54S:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_whr_g54s);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WHR_HP_G54:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_whr_hp_g54);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WZR_G300N:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_wzr_g300n);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WZR_RS_G54:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_wzr_rs_g54);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_wzr_rs_g54hp);
+ break;
+
+ case BCM47XX_BOARD_DELL_TM2300:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_dell_tm2300);
+ break;
+
+ case BCM47XX_BOARD_DLINK_DIR130:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_dlink_dir130);
+ break;
+ case BCM47XX_BOARD_DLINK_DIR330:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_dlink_dir330);
+ break;
+
+ case BCM47XX_BOARD_HUAWEI_E970:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_huawei_e970);
+ break;
+
+ case BCM47XX_BOARD_LINKSYS_E1000V1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e1000v1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_E1000V21:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e1000v21);
+ break;
+ case BCM47XX_BOARD_LINKSYS_E2000V1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e2000v1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_E3000V1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e3000v1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_E3200V1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e3200v1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_E4200V1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e4200v1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT150NV1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt150nv1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT150NV11:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt150nv11);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT160NV1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt160nv1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT160NV3:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt160nv3);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT300NV11:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt300nv11);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT310NV1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT610NV1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT610NV2:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv2);
+ break;
+
+ case BCM47XX_BOARD_MOTOROLA_WE800G:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_we800g);
+ break;
+ case BCM47XX_BOARD_MOTOROLA_WR850GP:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_wr850gp);
+ break;
+ case BCM47XX_BOARD_MOTOROLA_WR850GV2V3:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_wr850gv2v3);
+ break;
+
+ case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3400v1);
+ break;
+ case BCM47XX_BOARD_NETGEAR_WNDR3700V3:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3700v3);
+ break;
case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500_v1);
break;
+ case BCM47XX_BOARD_NETGEAR_WNR834BV2:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr834bv2);
+ break;
+
+ case BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_simpletech_simpleshare);
+ break;
+
default:
pr_debug("No buttons configuration found for this device\n");
return -ENOTSUPP;

532
target/linux/brcm47xx/patches-3.10/123-MIPS-BCM47XX-Import-LEDs-database-from-OpenWrt.patch
View File

@ -1,532 +0,0 @@
From 6d4b22bc843c9de0f6acdbdcfb9b91b897a39e9c Mon Sep 17 00:00:00 2001
From: Rafa? Mi?ecki <zajec5@gmail.com>
Date: Thu, 2 Jan 2014 12:32:57 +0100
Subject: [PATCH 032/110] MIPS: BCM47XX: Import LEDs database from OpenWrt
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
Acked-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6298/
---
arch/mips/bcm47xx/leds.c | 494 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 494 insertions(+)
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -3,6 +3,334 @@
#include <linux/leds.h>
#include <bcm47xx_board.h>
+/**************************************************
+ * Database
+ **************************************************/
+
+#define BCM47XX_GPIO_LED(_gpio, _color, _function, _active_low, \
+ _default_state) \
+ { \
+ .name = "bcm47xx:" _color ":" _function, \
+ .gpio = _gpio, \
+ .active_low = _active_low, \
+ .default_state = _default_state, \
+ }
+
+/* Asus */
+
+static const struct gpio_led
+bcm47xx_leds_asus_rtn12[] __initconst = {
+ BCM47XX_GPIO_LED(2, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(7, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_rtn16[] __initconst = {
+ BCM47XX_GPIO_LED(1, "blue", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(7, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_rtn66u[] __initconst = {
+ BCM47XX_GPIO_LED(12, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(15, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl300g[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl320ge[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(2, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(11, "unk", "link", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl330ge[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl500gd[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl500gpv1[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl500gpv2[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(1, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl500w[] __initconst = {
+ BCM47XX_GPIO_LED(5, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl520gc[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(1, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl520gu[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(1, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl700ge[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON), /* Labeled "READY" (there is no "power" LED). Originally ON, flashing on USB activity. */
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wlhdd[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(2, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* Belkin */
+
+static const struct gpio_led
+bcm47xx_leds_belkin_f7d4301[] __initconst = {
+ BCM47XX_GPIO_LED(10, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(11, "amber", "power", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(12, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(13, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(14, "unk", "usb0", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(15, "unk", "usb1", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* Buffalo */
+
+static const struct gpio_led
+bcm47xx_leds_buffalo_whr2_a54g54[] __initconst = {
+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_buffalo_whr_g125[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "bridge", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(2, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "unk", "internal", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_buffalo_whr_g54s[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "bridge", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(2, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "unk", "internal", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_buffalo_whr_hp_g54[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "bridge", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(2, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "unk", "internal", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_buffalo_wzr_g300n[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "bridge", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_buffalo_wzr_rs_g54[] __initconst = {
+ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "unk", "vpn", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_buffalo_wzr_rs_g54hp[] __initconst = {
+ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "unk", "vpn", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* Dell */
+
+static const struct gpio_led
+bcm47xx_leds_dell_tm2300[] __initconst = {
+ BCM47XX_GPIO_LED(6, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+/* D-Link */
+
+static const struct gpio_led
+bcm47xx_leds_dlink_dir130[] __initconst = {
+ BCM47XX_GPIO_LED(0, "green", "status", 1, LEDS_GPIO_DEFSTATE_OFF), /* Originally blinking when device is ready, separated from "power" LED */
+ BCM47XX_GPIO_LED(6, "blue", "unk", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_dlink_dir330[] __initconst = {
+ BCM47XX_GPIO_LED(0, "green", "status", 1, LEDS_GPIO_DEFSTATE_OFF), /* Originally blinking when device is ready, separated from "power" LED */
+ BCM47XX_GPIO_LED(4, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(6, "blue", "unk", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* Huawei */
+
+static const struct gpio_led
+bcm47xx_leds_huawei_e970[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* Linksys */
+
+static const struct gpio_led
+bcm47xx_leds_linksys_e1000v1[] __initconst = {
+ BCM47XX_GPIO_LED(0, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(2, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(4, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_e1000v21[] __initconst = {
+ BCM47XX_GPIO_LED(5, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(6, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(7, "amber", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(8, "blue", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_e2000v1[] __initconst = {
+ BCM47XX_GPIO_LED(1, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(2, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(3, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(4, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_e3000v1[] __initconst = {
+ BCM47XX_GPIO_LED(0, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(5, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(7, "unk", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_e3200v1[] __initconst = {
+ BCM47XX_GPIO_LED(3, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_e4200v1[] __initconst = {
+ BCM47XX_GPIO_LED(5, "white", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt150nv1[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(5, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt150nv11[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(5, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt160nv1[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(5, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt160nv3[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(2, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(4, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt300nv11[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(5, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt310nv1[] __initconst = {
+ BCM47XX_GPIO_LED(1, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(9, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt610nv1[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(9, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt610nv2[] __initconst = {
+ BCM47XX_GPIO_LED(0, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(5, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(7, "unk", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* Motorola */
+
+static const struct gpio_led
+bcm47xx_leds_motorola_we800g[] __initconst = {
+ BCM47XX_GPIO_LED(1, "amber", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(2, "unk", "unk", 1, LEDS_GPIO_DEFSTATE_OFF), /* There are only 3 LEDs: Power, Wireless and Device (ethernet) */
+ BCM47XX_GPIO_LED(4, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_motorola_wr850gp[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(6, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_motorola_wr850gv2v3[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* Netgear */
+
+static const struct gpio_led
+bcm47xx_leds_netgear_wndr3400v1[] __initconst = {
+ BCM47XX_GPIO_LED(2, "green", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(7, "amber", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
static const struct gpio_led
bcm47xx_leds_netgear_wndr4500_v1_leds[] __initconst = {
{
@@ -49,6 +377,24 @@ bcm47xx_leds_netgear_wndr4500_v1_leds[]
},
};
+static const struct gpio_led
+bcm47xx_leds_netgear_wnr834bv2[] __initconst = {
+ BCM47XX_GPIO_LED(2, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(3, "amber", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "unk", "connected", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* SimpleTech */
+
+static const struct gpio_led
+bcm47xx_leds_simpletech_simpleshare[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "status", 1, LEDS_GPIO_DEFSTATE_OFF), /* "Ready" LED */
+};
+
+/**************************************************
+ * Init
+ **************************************************/
+
static struct gpio_led_platform_data bcm47xx_leds_pdata;
#define bcm47xx_set_pdata(dev_leds) do { \
@@ -61,9 +407,157 @@ void __init bcm47xx_leds_register(void)
enum bcm47xx_board board = bcm47xx_board_get();
switch (board) {
+ case BCM47XX_BOARD_ASUS_RTN12:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_rtn12);
+ break;
+ case BCM47XX_BOARD_ASUS_RTN16:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_rtn16);
+ break;
+ case BCM47XX_BOARD_ASUS_RTN66U:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_rtn66u);
+ break;
+ case BCM47XX_BOARD_ASUS_WL300G:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl300g);
+ break;
+ case BCM47XX_BOARD_ASUS_WL320GE:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl320ge);
+ break;
+ case BCM47XX_BOARD_ASUS_WL330GE:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl330ge);
+ break;
+ case BCM47XX_BOARD_ASUS_WL500GD:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl500gd);
+ break;
+ case BCM47XX_BOARD_ASUS_WL500GPV1:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl500gpv1);
+ break;
+ case BCM47XX_BOARD_ASUS_WL500GPV2:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl500gpv2);
+ break;
+ case BCM47XX_BOARD_ASUS_WL500W:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl500w);
+ break;
+ case BCM47XX_BOARD_ASUS_WL520GC:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl520gc);
+ break;
+ case BCM47XX_BOARD_ASUS_WL520GU:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl520gu);
+ break;
+ case BCM47XX_BOARD_ASUS_WL700GE:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl700ge);
+ break;
+ case BCM47XX_BOARD_ASUS_WLHDD:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wlhdd);
+ break;
+
+ case BCM47XX_BOARD_BELKIN_F7D4301:
+ bcm47xx_set_pdata(bcm47xx_leds_belkin_f7d4301);
+ break;
+
+ case BCM47XX_BOARD_BUFFALO_WHR2_A54G54:
+ bcm47xx_set_pdata(bcm47xx_leds_buffalo_whr2_a54g54);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WHR_G125:
+ bcm47xx_set_pdata(bcm47xx_leds_buffalo_whr_g125);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WHR_G54S:
+ bcm47xx_set_pdata(bcm47xx_leds_buffalo_whr_g54s);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WHR_HP_G54:
+ bcm47xx_set_pdata(bcm47xx_leds_buffalo_whr_hp_g54);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WZR_G300N:
+ bcm47xx_set_pdata(bcm47xx_leds_buffalo_wzr_g300n);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WZR_RS_G54:
+ bcm47xx_set_pdata(bcm47xx_leds_buffalo_wzr_rs_g54);
+ break;
+ case BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP:
+ bcm47xx_set_pdata(bcm47xx_leds_buffalo_wzr_rs_g54hp);
+ break;
+
+ case BCM47XX_BOARD_DELL_TM2300:
+ bcm47xx_set_pdata(bcm47xx_leds_dell_tm2300);
+ break;
+
+ case BCM47XX_BOARD_DLINK_DIR130:
+ bcm47xx_set_pdata(bcm47xx_leds_dlink_dir130);
+ break;
+ case BCM47XX_BOARD_DLINK_DIR330:
+ bcm47xx_set_pdata(bcm47xx_leds_dlink_dir330);
+ break;
+
+ case BCM47XX_BOARD_HUAWEI_E970:
+ bcm47xx_set_pdata(bcm47xx_leds_huawei_e970);
+ break;
+
+ case BCM47XX_BOARD_LINKSYS_E1000V1:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_e1000v1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_E1000V21:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_e1000v21);
+ break;
+ case BCM47XX_BOARD_LINKSYS_E2000V1:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_e2000v1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_E3000V1:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_e3000v1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_E3200V1:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_e3200v1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_E4200V1:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_e4200v1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT150NV1:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt150nv1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT150NV11:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt150nv11);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT160NV1:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt160nv1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT160NV3:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt160nv3);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT300NV11:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt300nv11);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT310NV1:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT610NV1:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT610NV2:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv2);
+ break;
+
+ case BCM47XX_BOARD_MOTOROLA_WE800G:
+ bcm47xx_set_pdata(bcm47xx_leds_motorola_we800g);
+ break;
+ case BCM47XX_BOARD_MOTOROLA_WR850GP:
+ bcm47xx_set_pdata(bcm47xx_leds_motorola_wr850gp);
+ break;
+ case BCM47XX_BOARD_MOTOROLA_WR850GV2V3:
+ bcm47xx_set_pdata(bcm47xx_leds_motorola_wr850gv2v3);
+ break;
+
+ case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
+ bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr3400v1);
+ break;
case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500_v1_leds);
break;
+ case BCM47XX_BOARD_NETGEAR_WNR834BV2:
+ bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr834bv2);
+ break;
+
+ case BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE:
+ bcm47xx_set_pdata(bcm47xx_leds_simpletech_simpleshare);
+ break;
+
default:
pr_debug("No LEDs configuration found for this device\n");
return;

36
target/linux/brcm47xx/patches-3.10/124-MIPS-BCM47XX-Enable-buttons-support-on-SSB.patch
View File

@ -1,36 +0,0 @@
From 6dac092b12755ccbc00412871cd9535b687d16d7 Mon Sep 17 00:00:00 2001
From: Rafa? Mi?ecki <zajec5@gmail.com>
Date: Fri, 3 Jan 2014 09:55:30 +0100
Subject: [PATCH] MIPS: BCM47XX: Enable buttons support on SSB
This is supported since implementing IRQ domain in ssb.
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
arch/mips/bcm47xx/buttons.c | 8 --------
1 file changed, 8 deletions(-)
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -3,7 +3,6 @@
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/interrupt.h>
-#include <linux/ssb/ssb_embedded.h>
#include <bcm47xx_board.h>
#include <bcm47xx.h>
@@ -371,13 +370,6 @@ int __init bcm47xx_buttons_register(void
enum bcm47xx_board board = bcm47xx_board_get();
int err;
-#ifdef CONFIG_BCM47XX_SSB
- if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_SSB) {
- pr_debug("Buttons on SSB are not supported yet.\n");
- return -ENOTSUPP;
- }
-#endif
-
switch (board) {
case BCM47XX_BOARD_ASUS_RTN12:
err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn12);

118
target/linux/brcm47xx/patches-3.10/125-MIPS-BCM47XX-Convert-WNDR4500-to-new-syntax.patch
View File

@ -1,118 +0,0 @@
From 2d842783d4aaa25803e92f663869ea64a4eddd00 Mon Sep 17 00:00:00 2001
From: Rafa? Mi?ecki <zajec5@gmail.com>
Date: Fri, 3 Jan 2014 09:37:42 +0100
Subject: [PATCH] MIPS: BCM47XX: Convert WNDR4500 to new syntax
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
arch/mips/bcm47xx/buttons.c | 22 ++++--------------
arch/mips/bcm47xx/leds.c | 53 ++++++++-----------------------------------
2 files changed, 14 insertions(+), 61 deletions(-)
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -304,22 +304,10 @@ bcm47xx_buttons_netgear_wndr3700v3[] __i
};
static const struct gpio_keys_button
-bcm47xx_buttons_netgear_wndr4500_v1[] __initconst = {
- {
- .code = KEY_WPS_BUTTON,
- .gpio = 4,
- .active_low = 1,
- },
- {
- .code = KEY_RFKILL,
- .gpio = 5,
- .active_low = 1,
- },
- {
- .code = KEY_RESTART,
- .gpio = 6,
- .active_low = 1,
- },
+bcm47xx_buttons_netgear_wndr4500v1[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(5, KEY_RFKILL),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
};
static const struct gpio_keys_button
@@ -515,7 +503,7 @@ int __init bcm47xx_buttons_register(void
err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3700v3);
break;
case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500_v1);
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500v1);
break;
case BCM47XX_BOARD_NETGEAR_WNR834BV2:
err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr834bv2);
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -332,49 +332,14 @@ bcm47xx_leds_netgear_wndr3400v1[] __init
};
static const struct gpio_led
-bcm47xx_leds_netgear_wndr4500_v1_leds[] __initconst = {
- {
- .name = "bcm47xx:green:wps",
- .gpio = 1,
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_KEEP,
- },
- {
- .name = "bcm47xx:green:power",
- .gpio = 2,
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_KEEP,
- },
- {
- .name = "bcm47xx:orange:power",
- .gpio = 3,
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_KEEP,
- },
- {
- .name = "bcm47xx:green:usb1",
- .gpio = 8,
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_KEEP,
- },
- {
- .name = "bcm47xx:green:2ghz",
- .gpio = 9,
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_KEEP,
- },
- {
- .name = "bcm47xx:blue:5ghz",
- .gpio = 11,
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_KEEP,
- },
- {
- .name = "bcm47xx:green:usb2",
- .gpio = 14,
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_KEEP,
- },
+bcm47xx_leds_netgear_wndr4500v1[] __initconst = {
+ BCM47XX_GPIO_LED(1, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(2, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(3, "amber", "power", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(8, "green", "usb1", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(9, "green", "2ghz", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(11, "blue", "5ghz", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(14, "green", "usb2", 1, LEDS_GPIO_DEFSTATE_OFF),
};
static const struct gpio_led
@@ -548,7 +513,7 @@ void __init bcm47xx_leds_register(void)
bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr3400v1);
break;
case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
- bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500_v1_leds);
+ bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500v1);
break;
case BCM47XX_BOARD_NETGEAR_WNR834BV2:
bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr834bv2);

49
target/linux/brcm47xx/patches-3.10/126-MIPS-BCM47XX-Use-timer-trigger-for-status-LEDs.patch
View File

@ -1,49 +0,0 @@
From 5c985c2a17ae0bdbc95fd8246631e00a35746396 Mon Sep 17 00:00:00 2001
From: Rafa? Mi?ecki <zajec5@gmail.com>
Date: Fri, 3 Jan 2014 09:04:39 +0100
Subject: [PATCH] MIPS: BCM47XX: Use "timer" trigger for status LEDs
Some devices have power LED as well as status LED. The second one is
used to show the firmware is up and running. Set "timer" trigger for
such LEDs.
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
arch/mips/bcm47xx/leds.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -16,6 +16,16 @@
.default_state = _default_state, \
}
+#define BCM47XX_GPIO_LED_TRIGGER(_gpio, _color, _function, _active_low, \
+ _default_trigger) \
+ { \
+ .name = "bcm47xx:" _color ":" _function, \
+ .gpio = _gpio, \
+ .active_low = _active_low, \
+ .default_state = LEDS_GPIO_DEFSTATE_OFF, \
+ .default_trigger = _default_trigger, \
+ }
+
/* Asus */
static const struct gpio_led
@@ -176,13 +186,13 @@ bcm47xx_leds_dell_tm2300[] __initconst =
static const struct gpio_led
bcm47xx_leds_dlink_dir130[] __initconst = {
- BCM47XX_GPIO_LED(0, "green", "status", 1, LEDS_GPIO_DEFSTATE_OFF), /* Originally blinking when device is ready, separated from "power" LED */
+ BCM47XX_GPIO_LED_TRIGGER(0, "green", "status", 1, "timer"), /* Originally blinking when device is ready, separated from "power" LED */
BCM47XX_GPIO_LED(6, "blue", "unk", 1, LEDS_GPIO_DEFSTATE_OFF),
};
static const struct gpio_led
bcm47xx_leds_dlink_dir330[] __initconst = {
- BCM47XX_GPIO_LED(0, "green", "status", 1, LEDS_GPIO_DEFSTATE_OFF), /* Originally blinking when device is ready, separated from "power" LED */
+ BCM47XX_GPIO_LED_TRIGGER(0, "green", "status", 1, "timer"), /* Originally blinking when device is ready, separated from "power" LED */
BCM47XX_GPIO_LED(4, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
BCM47XX_GPIO_LED(6, "blue", "unk", 1, LEDS_GPIO_DEFSTATE_OFF),
};

207
target/linux/brcm47xx/patches-3.10/127-MIPS-BCM47XX-Drop-WGT634U-hacks.patch
View File

@ -1,207 +0,0 @@
From 68e30f30875d4e4608cebec27ca8bd07be0d0f64 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Thu, 2 Jan 2014 13:53:15 +0100
Subject: [PATCH] MIPS: BCM47XX: Drop WGT634U hacks
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This old wgt634u.c was trying to implement a bit ugly support for
Netgear WGT634U. It provided info about LED, flash mapping & layout and
was trying to handle reset button.
This is not needed anymore as we have replacement for all this stuff.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6302/
---
arch/mips/bcm47xx/Makefile | 1 -
arch/mips/bcm47xx/wgt634u.c | 174 --------------------------------------------
2 files changed, 175 deletions(-)
delete mode 100644 arch/mips/bcm47xx/wgt634u.c
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -5,4 +5,3 @@
obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
obj-y += board.o buttons.o leds.o
-obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o
--- a/arch/mips/bcm47xx/wgt634u.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
- */
-
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/leds.h>
-#include <linux/mtd/physmap.h>
-#include <linux/ssb/ssb.h>
-#include <linux/ssb/ssb_embedded.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-#include <linux/gpio.h>
-#include <asm/mach-bcm47xx/bcm47xx.h>
-
-/* GPIO definitions for the WGT634U */
-#define WGT634U_GPIO_LED 3
-#define WGT634U_GPIO_RESET 2
-#define WGT634U_GPIO_TP1 7
-#define WGT634U_GPIO_TP2 6
-#define WGT634U_GPIO_TP3 5
-#define WGT634U_GPIO_TP4 4
-#define WGT634U_GPIO_TP5 1
-
-static struct gpio_led wgt634u_leds[] = {
- {
- .name = "power",
- .gpio = WGT634U_GPIO_LED,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
-};
-
-static struct gpio_led_platform_data wgt634u_led_data = {
- .num_leds = ARRAY_SIZE(wgt634u_leds),
- .leds = wgt634u_leds,
-};
-
-static struct platform_device wgt634u_gpio_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &wgt634u_led_data,
- }
-};
-
-
-/* 8MiB flash. The struct mtd_partition matches original Netgear WGT634U
- firmware. */
-static struct mtd_partition wgt634u_partitions[] = {
- {
- .name = "cfe",
- .offset = 0,
- .size = 0x60000, /* 384k */
- .mask_flags = MTD_WRITEABLE /* force read-only */
- },
- {
- .name = "config",
- .offset = 0x60000,
- .size = 0x20000 /* 128k */
- },
- {
- .name = "linux",
- .offset = 0x80000,
- .size = 0x140000 /* 1280k */
- },
- {
- .name = "jffs",
- .offset = 0x1c0000,
- .size = 0x620000 /* 6272k */
- },
- {
- .name = "nvram",
- .offset = 0x7e0000,
- .size = 0x20000 /* 128k */
- },
-};
-
-static struct physmap_flash_data wgt634u_flash_data = {
- .parts = wgt634u_partitions,
- .nr_parts = ARRAY_SIZE(wgt634u_partitions)
-};
-
-static struct resource wgt634u_flash_resource = {
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device wgt634u_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = { .platform_data = &wgt634u_flash_data, },
- .resource = &wgt634u_flash_resource,
- .num_resources = 1,
-};
-
-/* Platform devices */
-static struct platform_device *wgt634u_devices[] __initdata = {
- &wgt634u_flash,
- &wgt634u_gpio_leds,
-};
-
-static irqreturn_t gpio_interrupt(int irq, void *ignored)
-{
- int state;
-
- /* Interrupts are shared, check if the current one is
- a GPIO interrupt. */
- if (!ssb_chipco_irq_status(&bcm47xx_bus.ssb.chipco,
- SSB_CHIPCO_IRQ_GPIO))
- return IRQ_NONE;
-
- state = gpio_get_value(WGT634U_GPIO_RESET);
-
- /* Interrupt are level triggered, revert the interrupt polarity
- to clear the interrupt. */
- ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << WGT634U_GPIO_RESET,
- state ? 1 << WGT634U_GPIO_RESET : 0);
-
- if (!state) {
- printk(KERN_INFO "Reset button pressed");
- ctrl_alt_del();
- }
-
- return IRQ_HANDLED;
-}
-
-static int __init wgt634u_init(void)
-{
- /* There is no easy way to detect that we are running on a WGT634U
- * machine. Use the MAC address as an heuristic. Netgear Inc. has
- * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
- */
- u8 *et0mac;
-
- if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
- return -ENODEV;
-
- et0mac = bcm47xx_bus.ssb.sprom.et0mac;
-
- if (et0mac[0] == 0x00 &&
- ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
- (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
- struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
-
- printk(KERN_INFO "WGT634U machine detected.\n");
-
- if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
- gpio_interrupt, IRQF_SHARED,
- "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
- gpio_direction_input(WGT634U_GPIO_RESET);
- ssb_gpio_intmask(&bcm47xx_bus.ssb,
- 1 << WGT634U_GPIO_RESET,
- 1 << WGT634U_GPIO_RESET);
- ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco,
- SSB_CHIPCO_IRQ_GPIO,
- SSB_CHIPCO_IRQ_GPIO);
- }
-
- wgt634u_flash_data.width = mcore->pflash.buswidth;
- wgt634u_flash_resource.start = mcore->pflash.window;
- wgt634u_flash_resource.end = mcore->pflash.window
- + mcore->pflash.window_size
- - 1;
- return platform_add_devices(wgt634u_devices,
- ARRAY_SIZE(wgt634u_devices));
- } else
- return -ENODEV;
-}
-
-module_init(wgt634u_init);

78
target/linux/brcm47xx/patches-3.10/128-MIPS-BCM47XX-Add-new-file-for-device-specific-workar.patch
View File

@ -1,78 +0,0 @@
From 1f3e1c682a0b5273e3ee8799b54319971f426e6a Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Wed, 29 Jan 2014 18:06:52 +0100
Subject: [RFC V2][PATCH] MIPS: BCM47XX: Add new file for device specific workarounds
---
V2: Drop pr_debug for devices we don't need workarounds for. It was too
load and not useful at all.
---
arch/mips/bcm47xx/Makefile | 2 +-
arch/mips/bcm47xx/bcm47xx_private.h | 3 +++
arch/mips/bcm47xx/setup.c | 1 +
arch/mips/bcm47xx/workarounds.c | 25 +++++++++++++++++++++++++
4 files changed, 30 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/bcm47xx/workarounds.c
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -4,4 +4,4 @@
#
obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
-obj-y += board.o buttons.o leds.o
+obj-y += board.o buttons.o leds.o workarounds.o
--- a/arch/mips/bcm47xx/bcm47xx_private.h
+++ b/arch/mips/bcm47xx/bcm47xx_private.h
@@ -9,4 +9,7 @@ int __init bcm47xx_buttons_register(void
/* leds.c */
void __init bcm47xx_leds_register(void);
+/* workarounds.c */
+void __init bcm47xx_workarounds(void);
+
#endif
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -248,6 +248,7 @@ static int __init bcm47xx_register_bus_c
bcm47xx_buttons_register();
bcm47xx_leds_register();
+ bcm47xx_workarounds();
return 0;
}
--- /dev/null
+++ b/arch/mips/bcm47xx/workarounds.c
@@ -0,0 +1,31 @@
+#include "bcm47xx_private.h"
+
+#include <linux/gpio.h>
+#include <bcm47xx_board.h>
+#include <bcm47xx.h>
+
+static void __init bcm47xx_workarounds_netgear_wnr3500l(void)
+{
+ const int usb_power = 12;
+ int err;
+
+ err = gpio_request_one(usb_power, GPIOF_OUT_INIT_HIGH, "usb_power");
+ if (err)
+ pr_err("Failed to request USB power gpio: %d\n", err);
+ else
+ gpio_free(usb_power);
+}
+
+void __init bcm47xx_workarounds(void)
+{
+ enum bcm47xx_board board = bcm47xx_board_get();
+
+ switch (board) {
+ case BCM47XX_BOARD_NETGEAR_WNR3500L:
+ bcm47xx_workarounds_netgear_wnr3500l();
+ break;
+ default:
+ /* No workaround(s) needed */
+ break;
+ }
+}

39
target/linux/brcm47xx/patches-3.10/139-MIPS-BCM47XX-detect-more-linksys-devices.patch
View File

@ -1,39 +0,0 @@
From b09189336f6d974c554aed03b4651e9f68ce0abd Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sun, 23 Feb 2014 16:38:29 +0100
Subject: [PATCH 3/6] MIPS: BCM47XX: detect some more Linksys devices
The Linksys WRT54G/GS/GL family uses the same boardtype numbers, and
the same gpio configuration. The boardtype numbers are changing with
the hardware versions, but these hardware numbers are different or each
model.
Detect them all as one device, this also worked in OpenWrt.
---
arch/mips/bcm47xx/board.c | 4 +++-
arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 2 +-
2 files changed, 4 insertions(+), 2 deletions(-)
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -175,7 +175,9 @@ struct bcm47xx_board_type_list3 bcm47xx_
{{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
{{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
{{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "0x04CF", "3500", "02"},
- {{BCM47XX_BOARD_LINKSYS_WRT54GSV1, "Linksys WRT54GS V1"}, "0x0101", "42", "0x10"},
+ {{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0101", "42", "0x10"},
+ {{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0467", "42", "0x10"},
+ {{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0708", "42", "0x10"},
{ {0}, NULL},
};
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -66,7 +66,7 @@ enum bcm47xx_board {
BCM47XX_BOARD_LINKSYS_WRT310NV1,
BCM47XX_BOARD_LINKSYS_WRT310NV2,
BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
- BCM47XX_BOARD_LINKSYS_WRT54GSV1,
+ BCM47XX_BOARD_LINKSYS_WRT54G,
BCM47XX_BOARD_LINKSYS_WRT610NV1,
BCM47XX_BOARD_LINKSYS_WRT610NV2,
BCM47XX_BOARD_LINKSYS_WRTSL54GS,

133
target/linux/brcm47xx/patches-3.10/140-MIPS-BCM47XX-add-button-and-led-configuration-for-so.patch
View File

@ -1,133 +0,0 @@
From e3d15471f1be2bd2fd4db82907ad4b2d74ec2636 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri, 10 Jan 2014 23:55:28 +0100
Subject: [PATCH 4/6] MIPS: BCM47XX: add button and led configuration for some
Linksys devices
This adds led and button GPIO configuration for Linksys wrt54g3gv2,
wrt54gsv1 and wrtsl54gs. This is based on OpenWrt broadcom-diag code.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
arch/mips/bcm47xx/buttons.c | 27 +++++++++++++++++++++++++++
arch/mips/bcm47xx/leds.c | 33 +++++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -259,6 +259,18 @@ bcm47xx_buttons_linksys_wrt310nv1[] __in
};
static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt54g3gv2[] __initconst = {
+ BCM47XX_GPIO_KEY(5, KEY_WIMAX),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt54gsv1[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
bcm47xx_buttons_linksys_wrt610nv1[] __initconst = {
BCM47XX_GPIO_KEY(6, KEY_RESTART),
BCM47XX_GPIO_KEY(8, KEY_WPS_BUTTON),
@@ -270,6 +282,12 @@ bcm47xx_buttons_linksys_wrt610nv2[] __in
BCM47XX_GPIO_KEY(6, KEY_RESTART),
};
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrtsl54gs[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
/* Motorola */
static const struct gpio_keys_button
@@ -479,12 +497,21 @@ int __init bcm47xx_buttons_register(void
case BCM47XX_BOARD_LINKSYS_WRT310NV1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1);
break;
+ case BCM47XX_BOARD_LINKSYS_WRT54G:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54gsv1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g3gv2);
+ break;
case BCM47XX_BOARD_LINKSYS_WRT610NV1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv1);
break;
case BCM47XX_BOARD_LINKSYS_WRT610NV2:
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv2);
break;
+ case BCM47XX_BOARD_LINKSYS_WRTSL54GS:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrtsl54gs);
+ break;
case BCM47XX_BOARD_MOTOROLA_WE800G:
err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_we800g);
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -292,6 +292,21 @@ bcm47xx_leds_linksys_wrt310nv1[] __initc
};
static const struct gpio_led
+bcm47xx_leds_linksys_wrt54gsv1[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(5, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt54g3gv2[] __initconst = {
+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(2, "green", "3g", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "blue", "3g", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
bcm47xx_leds_linksys_wrt610nv1[] __initconst = {
BCM47XX_GPIO_LED(0, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
@@ -308,6 +323,15 @@ bcm47xx_leds_linksys_wrt610nv2[] __initc
BCM47XX_GPIO_LED(7, "unk", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
};
+static const struct gpio_led
+bcm47xx_leds_linksys_wrtsl54gs[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(2, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
/* Motorola */
static const struct gpio_led
@@ -502,12 +526,21 @@ void __init bcm47xx_leds_register(void)
case BCM47XX_BOARD_LINKSYS_WRT310NV1:
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1);
break;
+ case BCM47XX_BOARD_LINKSYS_WRT54G:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54gsv1);
+ break;
+ case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2);
+ break;
case BCM47XX_BOARD_LINKSYS_WRT610NV1:
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv1);
break;
case BCM47XX_BOARD_LINKSYS_WRT610NV2:
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv2);
break;
+ case BCM47XX_BOARD_LINKSYS_WRTSL54GS:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrtsl54gs);
+ break;
case BCM47XX_BOARD_MOTOROLA_WE800G:
bcm47xx_set_pdata(bcm47xx_leds_motorola_we800g);

89
target/linux/brcm47xx/patches-3.10/141-MIPS-BCM47XX-add-detection-and-GPIO-config-for-Sieme.patch
View File

@ -1,89 +0,0 @@
From c546fa49901252cbc1e4046d7188858b2f9e130f Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri, 10 Jan 2014 23:55:43 +0100
Subject: [PATCH 2/2] MIPS: BCM47XX: add detection and GPIO config for Siemens
SE505v2
This adds board detection for the Siemens SE505v2 and the led gpio
configuration. This board does not have any buttons.
This is based on OpenWrt broadcom-diag and Manuel Munz's nvram dump.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
arch/mips/bcm47xx/board.c | 17 +++++++++++++++++
arch/mips/bcm47xx/leds.c | 12 ++++++++++++
arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 2 ++
3 files changed, 31 insertions(+)
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -181,6 +181,13 @@ struct bcm47xx_board_type_list3 bcm47xx_
{ {0}, NULL},
};
+/* boardtype, boardrev */
+static const
+struct bcm47xx_board_type_list2 bcm47xx_board_list_board_type_rev[] __initconst = {
+ {{BCM47XX_BOARD_SIEMENS_SE505V2, "Siemens SE505 V2"}, "0x0101", "0x10"},
+ { {0}, NULL},
+};
+
static const
struct bcm47xx_board_type bcm47xx_board_unknown[] __initconst = {
{BCM47XX_BOARD_UNKNOWN, "Unknown Board"},
@@ -274,6 +281,16 @@ static __init const struct bcm47xx_board
return &e3->board;
}
}
+
+ if (bcm47xx_nvram_getenv("boardtype", buf1, sizeof(buf1)) >= 0 &&
+ bcm47xx_nvram_getenv("boardrev", buf2, sizeof(buf2)) >= 0 &&
+ bcm47xx_nvram_getenv("boardnum", buf3, sizeof(buf3)) == -ENOENT) {
+ for (e2 = bcm47xx_board_list_board_type_rev; e2->value1; e2++) {
+ if (!strcmp(buf1, e2->value1) &&
+ !strcmp(buf2, e2->value2))
+ return &e2->board;
+ }
+ }
return bcm47xx_board_unknown;
}
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -383,6 +383,14 @@ bcm47xx_leds_netgear_wnr834bv2[] __initc
BCM47XX_GPIO_LED(7, "unk", "connected", 0, LEDS_GPIO_DEFSTATE_OFF),
};
+/* Siemens */
+static const struct gpio_led
+bcm47xx_leds_siemens_se505v2[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(5, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
/* SimpleTech */
static const struct gpio_led
@@ -562,6 +570,10 @@ void __init bcm47xx_leds_register(void)
bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr834bv2);
break;
+ case BCM47XX_BOARD_SIEMENS_SE505V2:
+ bcm47xx_set_pdata(bcm47xx_leds_siemens_se505v2);
+ break;
+
case BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE:
bcm47xx_set_pdata(bcm47xx_leds_simpletech_simpleshare);
break;
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -94,6 +94,8 @@ enum bcm47xx_board {
BCM47XX_BOARD_PHICOMM_M1,
+ BCM47XX_BOARD_SIEMENS_SE505V2,
+
BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE,
BCM47XX_BOARD_ZTE_H218N,

77
target/linux/brcm47xx/patches-3.10/142-MIPS-BCM47XX-add-Belkin-F7Dxxxx-board-detection.patch
View File

@ -1,77 +0,0 @@
From 44927df87162ae9beb6e7b934b0e75818b88e350 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Thu, 2 Jan 2014 19:10:05 +0100
Subject: [PATCH] MIPS: BCM47XX: add Belkin F7Dxxxx board detection
From: Cody P Schafer <devel@codyps.com>
Add a few Belkin F7Dxxxx entries, with F7D4401 sourced from online
documentation and the "F7D7302" being observed. F7D3301, F7D3302, and
F7D4302 are reasonable guesses which are unlikely to cause
mis-detection.
Signed-off-by: Cody P Schafer <devel@codyps.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
arch/mips/bcm47xx/board.c | 4 ++++
arch/mips/bcm47xx/buttons.c | 4 ++++
arch/mips/bcm47xx/leds.c | 4 ++++
arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 4 ++++
4 files changed, 16 insertions(+)
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -71,7 +71,11 @@ struct bcm47xx_board_type_list1 bcm47xx_
{{BCM47XX_BOARD_ASUS_WL500W, "Asus WL500W"}, "WL500gW-"},
{{BCM47XX_BOARD_ASUS_WL520GC, "Asus WL520GC"}, "WL520GC-"},
{{BCM47XX_BOARD_ASUS_WL520GU, "Asus WL520GU"}, "WL520GU-"},
+ {{BCM47XX_BOARD_BELKIN_F7D3301, "Belkin F7D3301"}, "F7D3301"},
+ {{BCM47XX_BOARD_BELKIN_F7D3302, "Belkin F7D3302"}, "F7D3302"},
{{BCM47XX_BOARD_BELKIN_F7D4301, "Belkin F7D4301"}, "F7D4301"},
+ {{BCM47XX_BOARD_BELKIN_F7D4302, "Belkin F7D4302"}, "F7D4302"},
+ {{BCM47XX_BOARD_BELKIN_F7D4401, "Belkin F7D4401"}, "F7D4401"},
{ {0}, NULL},
};
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -420,7 +420,11 @@ int __init bcm47xx_buttons_register(void
err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wlhdd);
break;
+ case BCM47XX_BOARD_BELKIN_F7D3301:
+ case BCM47XX_BOARD_BELKIN_F7D3302:
case BCM47XX_BOARD_BELKIN_F7D4301:
+ case BCM47XX_BOARD_BELKIN_F7D4302:
+ case BCM47XX_BOARD_BELKIN_F7D4401:
err = bcm47xx_copy_bdata(bcm47xx_buttons_belkin_f7d4301);
break;
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -457,7 +457,11 @@ void __init bcm47xx_leds_register(void)
bcm47xx_set_pdata(bcm47xx_leds_asus_wlhdd);
break;
+ case BCM47XX_BOARD_BELKIN_F7D3301:
+ case BCM47XX_BOARD_BELKIN_F7D3302:
case BCM47XX_BOARD_BELKIN_F7D4301:
+ case BCM47XX_BOARD_BELKIN_F7D4302:
+ case BCM47XX_BOARD_BELKIN_F7D4401:
bcm47xx_set_pdata(bcm47xx_leds_belkin_f7d4301);
break;
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -27,7 +27,11 @@ enum bcm47xx_board {
BCM47XX_BOARD_ASUS_WL700GE,
BCM47XX_BOARD_ASUS_WLHDD,
+ BCM47XX_BOARD_BELKIN_F7D3301,
+ BCM47XX_BOARD_BELKIN_F7D3302,
BCM47XX_BOARD_BELKIN_F7D4301,
+ BCM47XX_BOARD_BELKIN_F7D4302,
+ BCM47XX_BOARD_BELKIN_F7D4401,
BCM47XX_BOARD_BUFFALO_WBR2_G54,
BCM47XX_BOARD_BUFFALO_WHR2_A54G54,

30
target/linux/brcm47xx/patches-3.10/143-MIPS-BCM47XX-Check-all-32-GPIOs-when-looking-for-a-p.patch
View File

@ -1,30 +0,0 @@
From 4fe2169acecb6e62821dfe14bc5c5852870b516f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Thu, 13 Feb 2014 17:48:12 +0100
Subject: MIPS: BCM47XX: Check all (32) GPIOs when looking for a pin
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Broadcom boards support 32 GPIOs and NVRAM may have entires for higher
ones too. Example:
gpio23=wombo_reset
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Cc: Rafał Miłecki <zajec5@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/6547/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -197,7 +197,7 @@ int bcm47xx_nvram_gpio_pin(const char *n
char nvram_var[10];
char buf[30];
- for (i = 0; i < 16; i++) {
+ for (i = 0; i < 32; i++) {
err = snprintf(nvram_var, sizeof(nvram_var), "gpio%i", i);
if (err <= 0)
continue;

40
target/linux/brcm47xx/patches-3.10/144-make-reboot-more-reliable.patch
View File

@ -1,40 +0,0 @@
From 26db431400c336c4cc658cb4888bab18d254c64a Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat, 9 Aug 2014 00:00:09 +0200
Subject: [PATCH] MIPS: BCM47XX: fix reboot problem on BCM4705/BCM4785
This adds some code based on code from the Broadcom GPL tar to fix the
reboot problems on BCM4705/BCM4785. I tried rebooting my device for ~10
times and have never seen a problem. This reverts the changes in the
previous commit and adds the real fix as suggested by Rafał.
Setting bit 22 in Reg 22, sel 4 puts the BIU (Bus Interface Unit) into
async mode.
The previous try was this:
commit 316cad5c1d4daee998cd1f83ccdb437f6f20d45c
Author: Hauke Mehrtens <hauke@hauke-m.de>
Date: Mon Jul 28 23:53:57 2014 +0200
MIPS: BCM47XX: make reboot more relaiable
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -55,7 +55,16 @@ static void bcm47xx_machine_restart(char
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
+ if (bcm47xx_bus.ssb.chip_id == 0x4785)
+ write_c0_diag4(1 << 22);
ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
+ if (bcm47xx_bus.ssb.chip_id == 0x4785) {
+ __asm__ __volatile__(
+ ".set\tmips3\n\t"
+ "sync\n\t"
+ "wait\n\t"
+ ".set\tmips0");
+ }
break;
#endif
#ifdef CONFIG_BCM47XX_BCMA

95
target/linux/brcm47xx/patches-3.10/145-MIPS-BCM47XX-fixup-broken-MAC-addresses-in-nvram.patch
View File

@ -1,95 +0,0 @@
From 103c0bf3ff46486466bc9138d70c25133d516003 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Tue, 29 Jul 2014 00:08:01 +0200
Subject: [PATCH] MIPS: BCM47XX: fixup broken MAC addresses in nvram
The address prefix 00:90:4C is used by Broadcom in their initial
configuration. When a mac address with the prefix 00:90:4C is used all
devices from the same series are sharing the same mac address. To
prevent mac address collisions we replace them with a mac address based
on the base address. To generate such addresses we take the main mac
address from et0macaddr and increase it by two for the first wifi
device and by 3 for the second one. This matches the printed mac
address on the device. The main mac address increased by one is used as
wan address by the vendor code.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: zajec5@gmail.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7489/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/bcm47xx/sprom.c | 48 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
--- a/arch/mips/bcm47xx/sprom.c
+++ b/arch/mips/bcm47xx/sprom.c
@@ -28,6 +28,8 @@
#include <bcm47xx.h>
#include <bcm47xx_nvram.h>
+#include <linux/if_ether.h>
+#include <linux/etherdevice.h>
static void create_key(const char *prefix, const char *postfix,
const char *name, char *buf, int len)
@@ -631,6 +633,33 @@ static void bcm47xx_fill_sprom_path_r45(
}
}
+static bool bcm47xx_is_valid_mac(u8 *mac)
+{
+ return mac && !(mac[0] == 0x00 && mac[1] == 0x90 && mac[2] == 0x4c);
+}
+
+static int bcm47xx_increase_mac_addr(u8 *mac, u8 num)
+{
+ u8 *oui = mac + ETH_ALEN/2 - 1;
+ u8 *p = mac + ETH_ALEN - 1;
+
+ do {
+ (*p) += num;
+ if (*p > num)
+ break;
+ p--;
+ num = 1;
+ } while (p != oui);
+
+ if (p == oui) {
+ pr_err("unable to fetch mac address\n");
+ return -ENOENT;
+ }
+ return 0;
+}
+
+static int mac_addr_used = 2;
+
static void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom,
const char *prefix, bool fallback)
{
@@ -648,6 +677,25 @@ static void bcm47xx_fill_sprom_ethernet(
nvram_read_macaddr(prefix, "macaddr", sprom->il0mac, fallback);
nvram_read_macaddr(prefix, "il0macaddr", sprom->il0mac, fallback);
+
+ /* The address prefix 00:90:4C is used by Broadcom in their initial
+ configuration. When a mac address with the prefix 00:90:4C is used
+ all devices from the same series are sharing the same mac address.
+ To prevent mac address collisions we replace them with a mac address
+ based on the base address. */
+ if (!bcm47xx_is_valid_mac(sprom->il0mac)) {
+ u8 mac[6];
+
+ nvram_read_macaddr(NULL, "et0macaddr", mac, false);
+ if (bcm47xx_is_valid_mac(mac)) {
+ int err = bcm47xx_increase_mac_addr(mac, mac_addr_used);
+
+ if (!err) {
+ memcpy(sprom->il0mac, mac, ETH_ALEN);
+ mac_addr_used++;
+ }
+ }
+ }
}
static void bcm47xx_fill_board_data(struct ssb_sprom *sprom, const char *prefix,

170
target/linux/brcm47xx/patches-3.10/146-MIPS-BCM47XX-add-Microsoft-MN-700-and-Asus-WL500G.patch
View File

@ -1,170 +0,0 @@
From 250dc03727b9cce91bd86091f05bf2443e2be9ec Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Tue, 29 Jul 2014 00:12:09 +0200
Subject: [PATCH] MIPS: BCM47XX: add Microsoft MN-700 and Asus WL500G
This patch adds detection for the Microsoft MN-700 and the Asus WL500G
router. This is based on some old code from OpenWrt.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: zajec5@gmail.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7490/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/bcm47xx/board.c | 17 +++++++++++++++++
arch/mips/bcm47xx/buttons.c | 19 +++++++++++++++++++
arch/mips/bcm47xx/leds.c | 19 +++++++++++++++++++
arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 3 +++
4 files changed, 58 insertions(+)
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -79,6 +79,14 @@ struct bcm47xx_board_type_list1 bcm47xx_
{ {0}, NULL},
};
+/* hardware_version, boardnum */
+static const
+struct bcm47xx_board_type_list2 bcm47xx_board_list_hw_version_num[] __initconst = {
+ {{BCM47XX_BOARD_MICROSOFT_MN700, "Microsoft MN-700"}, "WL500-", "mn700"},
+ {{BCM47XX_BOARD_ASUS_WL500G, "Asus WL500G"}, "WL500-", "asusX"},
+ { {0}, NULL},
+};
+
/* productid */
static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_productid[] __initconst = {
@@ -236,6 +244,15 @@ static __init const struct bcm47xx_board
}
}
+ if (bcm47xx_nvram_getenv("hardware_version", buf1, sizeof(buf1)) >= 0 &&
+ bcm47xx_nvram_getenv("boardtype", buf2, sizeof(buf2)) >= 0) {
+ for (e2 = bcm47xx_board_list_boot_hw; e2->value1; e2++) {
+ if (!strstarts(buf1, e2->value1) &&
+ !strcmp(buf2, e2->value2))
+ return &e2->board;
+ }
+ }
+
if (bcm47xx_nvram_getenv("productid", buf1, sizeof(buf1)) >= 0) {
for (e1 = bcm47xx_board_list_productid; e1->value1; e1++) {
if (!strcmp(buf1, e1->value1))
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -56,6 +56,11 @@ bcm47xx_buttons_asus_wl330ge[] __initcon
};
static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl500g[] __initconst = {
+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
bcm47xx_buttons_asus_wl500gd[] __initconst = {
BCM47XX_GPIO_KEY(6, KEY_RESTART),
};
@@ -288,6 +293,13 @@ bcm47xx_buttons_linksys_wrtsl54gs[] __in
BCM47XX_GPIO_KEY(6, KEY_RESTART),
};
+/* Microsoft */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_microsoft_nm700[] __initconst = {
+ BCM47XX_GPIO_KEY(7, KEY_RESTART),
+};
+
/* Motorola */
static const struct gpio_keys_button
@@ -395,6 +407,9 @@ int __init bcm47xx_buttons_register(void
case BCM47XX_BOARD_ASUS_WL330GE:
err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl330ge);
break;
+ case BCM47XX_BOARD_ASUS_WL500G:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500g);
+ break;
case BCM47XX_BOARD_ASUS_WL500GD:
err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500gd);
break;
@@ -517,6 +532,10 @@ int __init bcm47xx_buttons_register(void
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrtsl54gs);
break;
+ case BCM47XX_BOARD_MICROSOFT_MN700:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_microsoft_nm700);
+ break;
+
case BCM47XX_BOARD_MOTOROLA_WE800G:
err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_we800g);
break;
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -64,6 +64,11 @@ bcm47xx_leds_asus_wl330ge[] __initconst
};
static const struct gpio_led
+bcm47xx_leds_asus_wl500g[] __initconst = {
+ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
bcm47xx_leds_asus_wl500gd[] __initconst = {
BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
};
@@ -332,6 +337,13 @@ bcm47xx_leds_linksys_wrtsl54gs[] __initc
BCM47XX_GPIO_LED(7, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
};
+/* Microsoft */
+
+static const struct gpio_led
+bcm47xx_leds_microsoft_nm700[] __initconst = {
+ BCM47XX_GPIO_LED(6, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+};
+
/* Motorola */
static const struct gpio_led
@@ -432,6 +444,9 @@ void __init bcm47xx_leds_register(void)
case BCM47XX_BOARD_ASUS_WL330GE:
bcm47xx_set_pdata(bcm47xx_leds_asus_wl330ge);
break;
+ case BCM47XX_BOARD_ASUS_WL500G:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_wl500g);
+ break;
case BCM47XX_BOARD_ASUS_WL500GD:
bcm47xx_set_pdata(bcm47xx_leds_asus_wl500gd);
break;
@@ -554,6 +569,10 @@ void __init bcm47xx_leds_register(void)
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrtsl54gs);
break;
+ case BCM47XX_BOARD_MICROSOFT_MN700:
+ bcm47xx_set_pdata(bcm47xx_leds_microsoft_nm700);
+ break;
+
case BCM47XX_BOARD_MOTOROLA_WE800G:
bcm47xx_set_pdata(bcm47xx_leds_motorola_we800g);
break;
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -18,6 +18,7 @@ enum bcm47xx_board {
BCM47XX_BOARD_ASUS_WL300G,
BCM47XX_BOARD_ASUS_WL320GE,
BCM47XX_BOARD_ASUS_WL330GE,
+ BCM47XX_BOARD_ASUS_WL500G,
BCM47XX_BOARD_ASUS_WL500GD,
BCM47XX_BOARD_ASUS_WL500GPV1,
BCM47XX_BOARD_ASUS_WL500GPV2,
@@ -75,6 +76,8 @@ enum bcm47xx_board {
BCM47XX_BOARD_LINKSYS_WRT610NV2,
BCM47XX_BOARD_LINKSYS_WRTSL54GS,
+ BCM47XX_BOARD_MICROSOFT_MN700,
+
BCM47XX_BOARD_MOTOROLA_WE800G,
BCM47XX_BOARD_MOTOROLA_WR850GP,
BCM47XX_BOARD_MOTOROLA_WR850GV2V3,

110
target/linux/brcm47xx/patches-3.10/147-MIPS-BCM47xx-Distinguish-WRT54G-series-devices-by-bo.patch
View File

@ -1,110 +0,0 @@
From 41a867cb07443c77c24747dcbad1a40002516469 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Fri, 20 Jun 2014 07:56:39 +0200
Subject: [PATCH] MIPS: BCM47xx: Distinguish WRT54G series devices by boardtype
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Catalin reported that GPIOs used by bcm47xx don't match layout of his
WRT54GS V1.0 board. It seems we need to distinguish these 54G* devices.
Reported-by: Catalin Patulea <cat@vv.carleton.ca>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/7112/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/bcm47xx/board.c | 6 +++---
arch/mips/bcm47xx/buttons.c | 10 ++++++----
arch/mips/bcm47xx/leds.c | 10 ++++++----
arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 4 +++-
4 files changed, 18 insertions(+), 12 deletions(-)
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -187,9 +187,9 @@ struct bcm47xx_board_type_list3 bcm47xx_
{{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
{{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
{{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "0x04CF", "3500", "02"},
- {{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0101", "42", "0x10"},
- {{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0467", "42", "0x10"},
- {{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0708", "42", "0x10"},
+ {{BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101, "Linksys WRT54G/GS/GL"}, "0x0101", "42", "0x10"},
+ {{BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467, "Linksys WRT54G/GS/GL"}, "0x0467", "42", "0x10"},
+ {{BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708, "Linksys WRT54G/GS/GL"}, "0x0708", "42", "0x10"},
{ {0}, NULL},
};
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -270,7 +270,7 @@ bcm47xx_buttons_linksys_wrt54g3gv2[] __i
};
static const struct gpio_keys_button
-bcm47xx_buttons_linksys_wrt54gsv1[] __initconst = {
+bcm47xx_buttons_linksys_wrt54g_generic[] __initconst = {
BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
BCM47XX_GPIO_KEY(6, KEY_RESTART),
};
@@ -516,12 +516,14 @@ int __init bcm47xx_buttons_register(void
case BCM47XX_BOARD_LINKSYS_WRT310NV1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1);
break;
- case BCM47XX_BOARD_LINKSYS_WRT54G:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54gsv1);
- break;
case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g3gv2);
break;
+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101:
+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467:
+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g_generic);
+ break;
case BCM47XX_BOARD_LINKSYS_WRT610NV1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv1);
break;
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -297,7 +297,7 @@ bcm47xx_leds_linksys_wrt310nv1[] __initc
};
static const struct gpio_led
-bcm47xx_leds_linksys_wrt54gsv1[] __initconst = {
+bcm47xx_leds_linksys_wrt54g_generic[] __initconst = {
BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
BCM47XX_GPIO_LED(5, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
@@ -553,12 +553,14 @@ void __init bcm47xx_leds_register(void)
case BCM47XX_BOARD_LINKSYS_WRT310NV1:
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1);
break;
- case BCM47XX_BOARD_LINKSYS_WRT54G:
- bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54gsv1);
- break;
case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2);
break;
+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101:
+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467:
+ case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g_generic);
+ break;
case BCM47XX_BOARD_LINKSYS_WRT610NV1:
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv1);
break;
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -71,7 +71,9 @@ enum bcm47xx_board {
BCM47XX_BOARD_LINKSYS_WRT310NV1,
BCM47XX_BOARD_LINKSYS_WRT310NV2,
BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
- BCM47XX_BOARD_LINKSYS_WRT54G,
+ BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101,
+ BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467,
+ BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708,
BCM47XX_BOARD_LINKSYS_WRT610NV1,
BCM47XX_BOARD_LINKSYS_WRT610NV2,
BCM47XX_BOARD_LINKSYS_WRTSL54GS,

45
target/linux/brcm47xx/patches-3.10/148-MIPS-BCM47xx-Fix-LEDs-on-WRT54GS-V1.0.patch
View File

@ -1,45 +0,0 @@
From 7bb26b1691166d0d830c42c1a25caf82208bf90d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Fri, 20 Jun 2014 07:56:40 +0200
Subject: [PATCH] MIPS: BCM47xx: Fix LEDs on WRT54GS V1.0
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Reported-by: Catalin Patulea <cat@vv.carleton.ca>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/7113/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/bcm47xx/leds.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -311,6 +311,14 @@ bcm47xx_leds_linksys_wrt54g3gv2[] __init
BCM47XX_GPIO_LED(3, "blue", "3g", 0, LEDS_GPIO_DEFSTATE_OFF),
};
+/* Verified on: WRT54GS V1.0 */
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt54g_type_0101[] __initconst = {
+ BCM47XX_GPIO_LED(0, "green", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(7, "green", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
static const struct gpio_led
bcm47xx_leds_linksys_wrt610nv1[] __initconst = {
BCM47XX_GPIO_LED(0, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
@@ -557,6 +565,8 @@ void __init bcm47xx_leds_register(void)
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2);
break;
case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g_type_0101);
+ break;
case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467:
case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708:
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g_generic);

50
target/linux/brcm47xx/patches-3.10/149-MIPS-BCM47XX-Move-shared-symbols-to-the-config-BCM47.patch
View File

@ -1,50 +0,0 @@
From c949c0bc55571209fe6742f645b1e2eb20099591 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Tue, 17 Jun 2014 16:36:50 +0200
Subject: [PATCH 149/150] MIPS: BCM47XX: Move shared symbols to the config
BCM47XX
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/7100/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/Kconfig | 2 ++
arch/mips/bcm47xx/Kconfig | 4 ----
2 files changed, 2 insertions(+), 4 deletions(-)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -119,6 +119,8 @@ config BCM47XX
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
select EARLY_PRINTK_8250 if EARLY_PRINTK
+ select GPIOLIB
+ select LEDS_GPIO_REGISTER
help
Support for BCM47XX based boards
--- a/arch/mips/bcm47xx/Kconfig
+++ b/arch/mips/bcm47xx/Kconfig
@@ -11,8 +11,6 @@ config BCM47XX_SSB
select SSB_DRIVER_PCICORE if PCI
select SSB_PCICORE_HOSTMODE if PCI
select SSB_DRIVER_GPIO
- select GPIOLIB
- select LEDS_GPIO_REGISTER
default y
help
Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
@@ -29,8 +27,6 @@ config BCM47XX_BCMA
select BCMA_HOST_PCI if PCI
select BCMA_DRIVER_PCI_HOSTMODE if PCI
select BCMA_DRIVER_GPIO
- select GPIOLIB
- select LEDS_GPIO_REGISTER
default y
help
Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.

32
target/linux/brcm47xx/patches-3.10/150-MIPS-BCM47XX-Select-SYS_SUPPORTS_HIGHMEM-for-BCM47XX.patch
View File

@ -1,32 +0,0 @@
From ce01cbef8b0b71d01f8a68cba59da3198165bae6 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Tue, 17 Jun 2014 16:36:51 +0200
Subject: [PATCH 150/150] MIPS: BCM47XX: Select SYS_SUPPORTS_HIGHMEM for
BCM47XX_BCMA
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
It seems that bcm47xx can handle only 128 MiB of RAM directly. There
are few devices with 256 MiB, but Broadcom's SDK uses highmem to handle
anything above 128 MiB.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/7101/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/bcm47xx/Kconfig | 1 +
1 file changed, 1 insertion(+)
--- a/arch/mips/bcm47xx/Kconfig
+++ b/arch/mips/bcm47xx/Kconfig
@@ -20,6 +20,7 @@ config BCM47XX_SSB
config BCM47XX_BCMA
bool "BCMA Support for Broadcom BCM47XX"
select SYS_HAS_CPU_MIPS32_R2
+ select SYS_SUPPORTS_HIGHMEM
select CPU_MIPSR2_IRQ_VI
select BCMA
select BCMA_HOST_SOC

183
target/linux/brcm47xx/patches-3.10/151-MIPS-BCM47XX-Devices-database-update-for-3.17.patch
View File

@ -1,183 +0,0 @@
From 9194b3431616567ffbf69ef970506d695912be0b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Thu, 17 Jul 2014 23:24:30 +0200
Subject: [PATCH] MIPS: BCM47XX: Devices database update for 3.17
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Detect more devices and register leds & buttons for them.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7394/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/bcm47xx/board.c | 3 ++-
arch/mips/bcm47xx/buttons.c | 9 ++++++++
arch/mips/bcm47xx/leds.c | 53 +++++++++++++++++++++++++++++++++++++--------
3 files changed, 55 insertions(+), 10 deletions(-)
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -57,6 +57,7 @@ struct bcm47xx_board_type_list1 bcm47xx_
static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_hardware_version[] __initconst = {
{{BCM47XX_BOARD_ASUS_RTN10U, "Asus RT-N10U"}, "RTN10U"},
+ {{BCM47XX_BOARD_ASUS_RTN10D, "Asus RT-N10D"}, "RTN10D"},
{{BCM47XX_BOARD_ASUS_RTN12, "Asus RT-N12"}, "RT-N12"},
{{BCM47XX_BOARD_ASUS_RTN12B1, "Asus RT-N12B1"}, "RTN12B1"},
{{BCM47XX_BOARD_ASUS_RTN12C1, "Asus RT-N12C1"}, "RTN12C1"},
@@ -105,7 +106,7 @@ struct bcm47xx_board_type_list1 bcm47xx_
/* ModelId */
static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_ModelId[] __initconst = {
- {{BCM47XX_BOARD_DELL_TM2300, "Dell WX-5565"}, "WX-5565"},
+ {{BCM47XX_BOARD_DELL_TM2300, "Dell TrueMobile 2300"}, "WX-5565"},
{{BCM47XX_BOARD_MOTOROLA_WE800G, "Motorola WE800G"}, "WE800G"},
{{BCM47XX_BOARD_MOTOROLA_WR850GP, "Motorola WR850GP"}, "WR850GP"},
{{BCM47XX_BOARD_MOTOROLA_WR850GV2V3, "Motorola WR850G"}, "WR850G"},
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -341,6 +341,12 @@ bcm47xx_buttons_netgear_wndr4500v1[] __i
};
static const struct gpio_keys_button
+bcm47xx_buttons_netgear_wnr3500lv1[] __initconst = {
+ BCM47XX_GPIO_KEY(4, KEY_RESTART),
+ BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
bcm47xx_buttons_netgear_wnr834bv2[] __initconst = {
BCM47XX_GPIO_KEY(6, KEY_RESTART),
};
@@ -557,6 +563,9 @@ int __init bcm47xx_buttons_register(void
case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500v1);
break;
+ case BCM47XX_BOARD_NETGEAR_WNR3500L:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr3500lv1);
+ break;
case BCM47XX_BOARD_NETGEAR_WNR834BV2:
err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr834bv2);
break;
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -35,6 +35,15 @@ bcm47xx_leds_asus_rtn12[] __initconst =
};
static const struct gpio_led
+bcm47xx_leds_asus_rtn15u[] __initconst = {
+ /* TODO: Add "wlan" LED */
+ BCM47XX_GPIO_LED(3, "blue", "wan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(4, "blue", "lan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(6, "blue", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(9, "blue", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
bcm47xx_leds_asus_rtn16[] __initconst = {
BCM47XX_GPIO_LED(1, "blue", "power", 1, LEDS_GPIO_DEFSTATE_ON),
BCM47XX_GPIO_LED(7, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
@@ -42,8 +51,8 @@ bcm47xx_leds_asus_rtn16[] __initconst =
static const struct gpio_led
bcm47xx_leds_asus_rtn66u[] __initconst = {
- BCM47XX_GPIO_LED(12, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
- BCM47XX_GPIO_LED(15, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(12, "blue", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(15, "blue", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
};
static const struct gpio_led
@@ -221,8 +230,8 @@ bcm47xx_leds_linksys_e1000v1[] __initcon
static const struct gpio_led
bcm47xx_leds_linksys_e1000v21[] __initconst = {
- BCM47XX_GPIO_LED(5, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
- BCM47XX_GPIO_LED(6, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(5, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(6, "blue", "power", 1, LEDS_GPIO_DEFSTATE_ON),
BCM47XX_GPIO_LED(7, "amber", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
BCM47XX_GPIO_LED(8, "blue", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
};
@@ -319,6 +328,16 @@ bcm47xx_leds_linksys_wrt54g_type_0101[]
BCM47XX_GPIO_LED(7, "green", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
};
+/* Verified on: WRT54GL V1.1 */
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt54g_type_0467[] __initconst = {
+ BCM47XX_GPIO_LED(0, "green", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(2, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "green", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
static const struct gpio_led
bcm47xx_leds_linksys_wrt610nv1[] __initconst = {
BCM47XX_GPIO_LED(0, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
@@ -338,11 +357,10 @@ bcm47xx_leds_linksys_wrt610nv2[] __initc
static const struct gpio_led
bcm47xx_leds_linksys_wrtsl54gs[] __initconst = {
- BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
- BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
- BCM47XX_GPIO_LED(2, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
- BCM47XX_GPIO_LED(3, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
- BCM47XX_GPIO_LED(7, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(0, "green", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(5, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(7, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
};
/* Microsoft */
@@ -397,6 +415,15 @@ bcm47xx_leds_netgear_wndr4500v1[] __init
};
static const struct gpio_led
+bcm47xx_leds_netgear_wnr3500lv1[] __initconst = {
+ BCM47XX_GPIO_LED(0, "blue", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(2, "green", "wan", 1, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(3, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+ BCM47XX_GPIO_LED(7, "amber", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
bcm47xx_leds_netgear_wnr834bv2[] __initconst = {
BCM47XX_GPIO_LED(2, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
BCM47XX_GPIO_LED(3, "amber", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
@@ -437,6 +464,9 @@ void __init bcm47xx_leds_register(void)
case BCM47XX_BOARD_ASUS_RTN12:
bcm47xx_set_pdata(bcm47xx_leds_asus_rtn12);
break;
+ case BCM47XX_BOARD_ASUS_RTN15U:
+ bcm47xx_set_pdata(bcm47xx_leds_asus_rtn15u);
+ break;
case BCM47XX_BOARD_ASUS_RTN16:
bcm47xx_set_pdata(bcm47xx_leds_asus_rtn16);
break;
@@ -568,6 +598,8 @@ void __init bcm47xx_leds_register(void)
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g_type_0101);
break;
case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467:
+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g_type_0467);
+ break;
case BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708:
bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g_generic);
break;
@@ -601,6 +633,9 @@ void __init bcm47xx_leds_register(void)
case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500v1);
break;
+ case BCM47XX_BOARD_NETGEAR_WNR3500L:
+ bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr3500lv1);
+ break;
case BCM47XX_BOARD_NETGEAR_WNR834BV2:
bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr834bv2);
break;

107
target/linux/brcm47xx/patches-3.10/152-Revert-MIPS-Delete-unused-function-add_temporary_ent.patch
View File

@ -1,107 +0,0 @@
From d377732c8c9aac14ccb900b65678558b0fb8f0f3 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Thu, 17 Jul 2014 23:26:32 +0200
Subject: [PATCH 152/153] Revert "MIPS: Delete unused function
add_temporary_entry."
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This reverts commit d7a887a73dec6c387b02a966a71aac767bbd9ce6.
Function add_temporary_entry is needed by bcm47xx to support highmem. We
need to add a temporary entry to check for amount of RAM.
The only change made in this revert was replacing (ENTER|EXIT)_CRITICAL.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/7395/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/include/asm/pgtable-32.h | 10 ++++++++
arch/mips/mm/tlb-r4k.c | 47 ++++++++++++++++++++++++++++++++++++++
2 files changed, 57 insertions(+)
--- a/arch/mips/include/asm/pgtable-32.h
+++ b/arch/mips/include/asm/pgtable-32.h
@@ -19,6 +19,16 @@
#include <asm-generic/pgtable-nopmd.h>
/*
+ * - add_temporary_entry() add a temporary TLB entry. We use TLB entries
+ * starting at the top and working down. This is for populating the
+ * TLB before trap_init() puts the TLB miss handler in place. It
+ * should be used only for entries matching the actual page tables,
+ * to prevent inconsistencies.
+ */
+extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
+ unsigned long entryhi, unsigned long pagemask);
+
+/*
* Basically we have the same two-level (which is the logical three level
* Linux page table layout folded) page tables as the i386. Some day
* when we have proper page coloring support we can have a 1% quicker
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -389,6 +389,51 @@ int __init has_transparent_hugepage(void
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+/*
+ * Used for loading TLB entries before trap_init() has started, when we
+ * don't actually want to add a wired entry which remains throughout the
+ * lifetime of the system
+ */
+
+static int temp_tlb_entry __cpuinitdata;
+
+__init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
+ unsigned long entryhi, unsigned long pagemask)
+{
+ int ret = 0;
+ unsigned long flags;
+ unsigned long wired;
+ unsigned long old_pagemask;
+ unsigned long old_ctx;
+
+ local_irq_save(flags);
+ /* Save old context and create impossible VPN2 value */
+ old_ctx = read_c0_entryhi();
+ old_pagemask = read_c0_pagemask();
+ wired = read_c0_wired();
+ if (--temp_tlb_entry < wired) {
+ printk(KERN_WARNING
+ "No TLB space left for add_temporary_entry\n");
+ ret = -ENOSPC;
+ goto out;
+ }
+
+ write_c0_index(temp_tlb_entry);
+ write_c0_pagemask(pagemask);
+ write_c0_entryhi(entryhi);
+ write_c0_entrylo0(entrylo0);
+ write_c0_entrylo1(entrylo1);
+ mtc0_tlbw_hazard();
+ tlb_write_indexed();
+ tlbw_use_hazard();
+
+ write_c0_entryhi(old_ctx);
+ write_c0_pagemask(old_pagemask);
+out:
+ local_irq_restore(flags);
+ return ret;
+}
+
static int __cpuinitdata ntlb;
static int __init set_ntlb(char *str)
{
@@ -426,6 +471,8 @@ void __cpuinit tlb_init(void)
write_c0_pagegrain(pg);
}
+ temp_tlb_entry = current_cpu_data.tlbsize - 1;
+
/* From this point on the ARC firmware is dead. */
local_flush_tlb_all();

166
target/linux/brcm47xx/patches-3.10/153-MIPS-BCM47XX-Detect-more-then-128-MiB-of-RAM-HIGHMEM.patch
View File

@ -1,166 +0,0 @@
From 6ee1d93455384cef8a0426effe85da241b525b63 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Thu, 17 Jul 2014 23:26:33 +0200
Subject: [PATCH 153/153] MIPS: BCM47XX: Detect more then 128 MiB of RAM
(HIGHMEM)
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
So far BCM47XX can only detect amount of HIGHMEM. It still requires
adding (registering) and well-testing before enabling by default.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7396/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
arch/mips/bcm47xx/bcm47xx_private.h | 3 ++
arch/mips/bcm47xx/prom.c | 68 ++++++++++++++++++++++++++++++++++++-
arch/mips/bcm47xx/setup.c | 3 ++
arch/mips/include/asm/pgtable-32.h | 2 ++
arch/mips/mm/tlb-r4k.c | 2 +-
5 files changed, 76 insertions(+), 2 deletions(-)
--- a/arch/mips/bcm47xx/bcm47xx_private.h
+++ b/arch/mips/bcm47xx/bcm47xx_private.h
@@ -3,6 +3,9 @@
#include <linux/kernel.h>
+/* prom.c */
+void __init bcm47xx_prom_highmem_init(void);
+
/* buttons.c */
int __init bcm47xx_buttons_register(void);
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -51,6 +51,8 @@ __init void bcm47xx_set_system_type(u16
chip_id);
}
+static unsigned long lowmem __initdata;
+
static __init void prom_init_mem(void)
{
unsigned long mem;
@@ -84,6 +86,7 @@ static __init void prom_init_mem(void)
if (!memcmp(prom_init, prom_init + mem, 32))
break;
}
+ lowmem = mem;
/* Ignoring the last page when ddr size is 128M. Cached
* accesses to last page is causing the processor to prefetch
@@ -92,7 +95,6 @@ static __init void prom_init_mem(void)
*/
if (c->cputype == CPU_74K && (mem == (128 << 20)))
mem -= 0x1000;
-
add_memory_region(0, mem, BOOT_MEM_RAM);
}
@@ -111,3 +113,67 @@ void __init prom_init(void)
void __init prom_free_prom_memory(void)
{
}
+
+#if defined(CONFIG_BCM47XX_BCMA) && defined(CONFIG_HIGHMEM)
+
+#define EXTVBASE 0xc0000000
+#define ENTRYLO(x) ((pte_val(pfn_pte((x) >> _PFN_SHIFT, PAGE_KERNEL_UNCACHED)) >> 6) | 1)
+
+#include <asm/tlbflush.h>
+
+/* Stripped version of tlb_init, with the call to build_tlb_refill_handler
+ * dropped. Calling it at this stage causes a hang.
+ */
+void __cpuinit early_tlb_init(void)
+{
+ write_c0_pagemask(PM_DEFAULT_MASK);
+ write_c0_wired(0);
+ temp_tlb_entry = current_cpu_data.tlbsize - 1;
+ local_flush_tlb_all();
+}
+
+void __init bcm47xx_prom_highmem_init(void)
+{
+ unsigned long off = (unsigned long)prom_init;
+ unsigned long extmem = 0;
+ bool highmem_region = false;
+
+ if (WARN_ON(bcm47xx_bus_type != BCM47XX_BUS_TYPE_BCMA))
+ return;
+
+ if (bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4706)
+ highmem_region = true;
+
+ if (lowmem != 128 << 20 || !highmem_region)
+ return;
+
+ early_tlb_init();
+
+ /* Add one temporary TLB entry to map SDRAM Region 2.
+ * Physical Virtual
+ * 0x80000000 0xc0000000 (1st: 256MB)
+ * 0x90000000 0xd0000000 (2nd: 256MB)
+ */
+ add_temporary_entry(ENTRYLO(0x80000000),
+ ENTRYLO(0x80000000 + (256 << 20)),
+ EXTVBASE, PM_256M);
+
+ off = EXTVBASE + __pa(off);
+ for (extmem = 128 << 20; extmem < 512 << 20; extmem <<= 1) {
+ if (!memcmp(prom_init, (void *)(off + extmem), 16))
+ break;
+ }
+ extmem -= lowmem;
+
+ early_tlb_init();
+
+ if (!extmem)
+ return;
+
+ pr_warn("Found %lu MiB of extra memory, but highmem is unsupported yet!\n",
+ extmem >> 20);
+
+ /* TODO: Register extra memory */
+}
+
+#endif /* defined(CONFIG_BCM47XX_BCMA) && defined(CONFIG_HIGHMEM) */
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -223,6 +223,9 @@ void __init plat_mem_setup(void)
bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;
bcm47xx_register_bcma();
bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id);
+#ifdef CONFIG_HIGHMEM
+ bcm47xx_prom_highmem_init();
+#endif
#endif
} else {
printk(KERN_INFO "bcm47xx: using ssb bus\n");
--- a/arch/mips/include/asm/pgtable-32.h
+++ b/arch/mips/include/asm/pgtable-32.h
@@ -18,6 +18,8 @@
#include <asm-generic/pgtable-nopmd.h>
+extern int temp_tlb_entry __cpuinitdata;
+
/*
* - add_temporary_entry() add a temporary TLB entry. We use TLB entries
* starting at the top and working down. This is for populating the
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -395,7 +395,7 @@ int __init has_transparent_hugepage(void
* lifetime of the system
*/
-static int temp_tlb_entry __cpuinitdata;
+int temp_tlb_entry __cpuinitdata;
__init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
unsigned long entryhi, unsigned long pagemask)

368
target/linux/brcm47xx/patches-3.10/159-cpu_fixes.patch
View File

@ -1,368 +0,0 @@
--- a/arch/mips/include/asm/r4kcache.h
+++ b/arch/mips/include/asm/r4kcache.h
@@ -17,6 +17,20 @@
#include <asm/cpu-features.h>
#include <asm/mipsmtregs.h>
+#ifdef CONFIG_BCM47XX
+#include <asm/paccess.h>
+#include <linux/ssb/ssb.h>
+#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
+
+#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
+#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
+#else
+#define BCM4710_DUMMY_RREG()
+
+#define BCM4710_FILL_TLB(addr)
+#define BCM4710_PROTECTED_FILL_TLB(addr)
+#endif
+
/*
* This macro return a properly sign-extended address suitable as base address
* for indexed cache operations. Two issues here:
@@ -150,6 +164,7 @@ static inline void flush_icache_line_ind
static inline void flush_dcache_line_indexed(unsigned long addr)
{
__dflush_prologue
+ BCM4710_DUMMY_RREG();
cache_op(Index_Writeback_Inv_D, addr);
__dflush_epilogue
}
@@ -169,6 +184,7 @@ static inline void flush_icache_line(uns
static inline void flush_dcache_line(unsigned long addr)
{
__dflush_prologue
+ BCM4710_DUMMY_RREG();
cache_op(Hit_Writeback_Inv_D, addr);
__dflush_epilogue
}
@@ -176,6 +192,7 @@ static inline void flush_dcache_line(uns
static inline void invalidate_dcache_line(unsigned long addr)
{
__dflush_prologue
+ BCM4710_DUMMY_RREG();
cache_op(Hit_Invalidate_D, addr);
__dflush_epilogue
}
@@ -208,6 +225,7 @@ static inline void flush_scache_line(uns
*/
static inline void protected_flush_icache_line(unsigned long addr)
{
+ BCM4710_DUMMY_RREG();
protected_cache_op(Hit_Invalidate_I, addr);
}
@@ -219,6 +237,7 @@ static inline void protected_flush_icach
*/
static inline void protected_writeback_dcache_line(unsigned long addr)
{
+ BCM4710_DUMMY_RREG();
protected_cache_op(Hit_Writeback_Inv_D, addr);
}
@@ -339,8 +358,52 @@ static inline void invalidate_tcache_pag
: "r" (base), \
"i" (op));
+static inline void blast_dcache(void)
+{
+ unsigned long start = KSEG0;
+ unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
+ unsigned long end = (start + dcache_size);
+
+ do {
+ BCM4710_DUMMY_RREG();
+ cache_op(Index_Writeback_Inv_D, start);
+ start += current_cpu_data.dcache.linesz;
+ } while(start < end);
+}
+
+static inline void blast_dcache_page(unsigned long page)
+{
+ unsigned long start = page;
+ unsigned long end = start + PAGE_SIZE;
+
+ BCM4710_FILL_TLB(start);
+ do {
+ BCM4710_DUMMY_RREG();
+ cache_op(Hit_Writeback_Inv_D, start);
+ start += current_cpu_data.dcache.linesz;
+ } while(start < end);
+}
+
+static inline void blast_dcache_page_indexed(unsigned long page)
+{
+ unsigned long start = page;
+ unsigned long end = start + PAGE_SIZE;
+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
+ unsigned long ws_end = current_cpu_data.dcache.ways <<
+ current_cpu_data.dcache.waybit;
+ unsigned long ws, addr;
+ for (ws = 0; ws < ws_end; ws += ws_inc) {
+ start = page + ws;
+ for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
+ BCM4710_DUMMY_RREG();
+ cache_op(Index_Writeback_Inv_D, addr);
+ }
+ }
+}
+
+
/* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
-#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \
+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, war) \
static inline void blast_##pfx##cache##lsize(void) \
{ \
unsigned long start = INDEX_BASE; \
@@ -352,6 +415,7 @@ static inline void blast_##pfx##cache##l
\
__##pfx##flush_prologue \
\
+ war \
for (ws = 0; ws < ws_end; ws += ws_inc) \
for (addr = start; addr < end; addr += lsize * 32) \
cache##lsize##_unroll32(addr|ws, indexop); \
@@ -366,6 +430,7 @@ static inline void blast_##pfx##cache##l
\
__##pfx##flush_prologue \
\
+ war \
do { \
cache##lsize##_unroll32(start, hitop); \
start += lsize * 32; \
@@ -384,6 +449,8 @@ static inline void blast_##pfx##cache##l
current_cpu_data.desc.waybit; \
unsigned long ws, addr; \
\
+ war \
+ \
__##pfx##flush_prologue \
\
for (ws = 0; ws < ws_end; ws += ws_inc) \
@@ -393,36 +460,38 @@ static inline void blast_##pfx##cache##l
__##pfx##flush_epilogue \
}
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16)
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16)
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16)
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32)
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32)
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32)
-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64)
-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64)
-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128)
-
-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16)
-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32)
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16)
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32)
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64)
-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128)
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, BCM4710_FILL_TLB(start);)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, BCM4710_FILL_TLB(start);)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, BCM4710_FILL_TLB(start);)
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
+
+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
/* build blast_xxx_range, protected_blast_xxx_range */
-#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \
+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, war, war2) \
static inline void prot##blast_##pfx##cache##_range(unsigned long start, \
unsigned long end) \
{ \
unsigned long lsize = cpu_##desc##_line_size(); \
unsigned long addr = start & ~(lsize - 1); \
unsigned long aend = (end - 1) & ~(lsize - 1); \
+ war \
\
__##pfx##flush_prologue \
\
while (1) { \
+ war2 \
prot##cache_op(hitop, addr); \
if (addr == aend) \
break; \
@@ -432,13 +501,13 @@ static inline void prot##blast_##pfx##ca
__##pfx##flush_epilogue \
}
-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_)
-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_)
-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_)
-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, )
-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, )
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_,, )
+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_,, )
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D,, BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD,,, )
/* blast_inv_dcache_range */
-__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, )
-__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, )
+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D,,,BCM4710_DUMMY_RREG();)
+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD,,, )
#endif /* _ASM_R4KCACHE_H */
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -449,6 +449,10 @@
.macro RESTORE_SP_AND_RET
LONG_L sp, PT_R29(sp)
.set mips3
+#ifdef CONFIG_BCM47XX
+ nop
+ nop
+#endif
eret
.set mips0
.endm
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -46,6 +46,10 @@
NESTED(except_vec3_generic, 0, sp)
.set push
.set noat
+#ifdef CONFIG_BCM47XX
+ nop
+ nop
+#endif
#if R5432_CP0_INTERRUPT_WAR
mfc0 k0, CP0_INDEX
#endif
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -35,6 +35,9 @@
#include <asm/traps.h>
#include <asm/dma-coherence.h>
+/* For enabling BCM4710 cache workarounds */
+int bcm4710 = 0;
+
/*
* Special Variant of smp_call_function for use by cache functions:
*
@@ -111,6 +114,9 @@ static void __cpuinit r4k_blast_dcache_p
{
unsigned long dc_lsize = cpu_dcache_line_size();
+ if (bcm4710)
+ r4k_blast_dcache_page = blast_dcache_page;
+ else
if (dc_lsize == 0)
r4k_blast_dcache_page = (void *)cache_noop;
else if (dc_lsize == 16)
@@ -127,6 +133,9 @@ static void __cpuinit r4k_blast_dcache_p
{
unsigned long dc_lsize = cpu_dcache_line_size();
+ if (bcm4710)
+ r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
+ else
if (dc_lsize == 0)
r4k_blast_dcache_page_indexed = (void *)cache_noop;
else if (dc_lsize == 16)
@@ -144,6 +153,9 @@ static void __cpuinit r4k_blast_dcache_s
{
unsigned long dc_lsize = cpu_dcache_line_size();
+ if (bcm4710)
+ r4k_blast_dcache = blast_dcache;
+ else
if (dc_lsize == 0)
r4k_blast_dcache = (void *)cache_noop;
else if (dc_lsize == 16)
@@ -674,6 +686,8 @@ static void local_r4k_flush_cache_sigtra
unsigned long addr = (unsigned long) arg;
R4600_HIT_CACHEOP_WAR_IMPL;
+ BCM4710_PROTECTED_FILL_TLB(addr);
+ BCM4710_PROTECTED_FILL_TLB(addr + 4);
if (dc_lsize)
protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
if (!cpu_icache_snoops_remote_store && scache_size)
@@ -1357,6 +1371,17 @@ static void __cpuinit coherency_setup(vo
* silly idea of putting something else there ...
*/
switch (current_cpu_type()) {
+ case CPU_BMIPS3300:
+ {
+ u32 cm;
+ cm = read_c0_diag();
+ /* Enable icache */
+ cm |= (1 << 31);
+ /* Enable dcache */
+ cm |= (1 << 30);
+ write_c0_diag(cm);
+ }
+ break;
case CPU_R4000PC:
case CPU_R4000SC:
case CPU_R4000MC:
@@ -1404,6 +1429,15 @@ void __cpuinit r4k_cache_init(void)
extern void build_copy_page(void);
struct cpuinfo_mips *c = &current_cpu_data;
+ /* Check if special workarounds are required */
+#ifdef CONFIG_BCM47XX
+ if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) {
+ printk("Enabling BCM4710A0 cache workarounds.\n");
+ bcm4710 = 1;
+ } else
+#endif
+ bcm4710 = 0;
+
probe_pcache();
setup_scache();
@@ -1469,6 +1503,14 @@ void __cpuinit r4k_cache_init(void)
*/
local_r4k___flush_cache_all(NULL);
+#ifdef CONFIG_BCM47XX
+ {
+ static void (*_coherency_setup)(void);
+ _coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
+ _coherency_setup();
+ }
+#else
coherency_setup();
+#endif
board_cache_error_setup = r4k_cache_error_setup;
}
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -1311,6 +1311,9 @@ static void __cpuinit build_r4000_tlb_re
/* No need for uasm_i_nop */
}
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(&p);
+#endif
#ifdef CONFIG_64BIT
build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
#else
@@ -1842,6 +1845,9 @@ build_r4000_tlbchange_handler_head(u32 *
{
struct work_registers wr = build_get_work_registers(p);
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(p);
+#endif
#ifdef CONFIG_64BIT
build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
#else

70
target/linux/brcm47xx/patches-3.10/160-kmap_coherent.patch
View File

@ -1,70 +0,0 @@
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -120,6 +120,9 @@
#ifndef cpu_has_local_ebase
#define cpu_has_local_ebase 1
#endif
+#ifndef cpu_use_kmap_coherent
+#define cpu_use_kmap_coherent 1
+#endif
/*
* I-Cache snoops remote store. This only matters on SMP. Some multiprocessors
--- a/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
@@ -79,4 +79,6 @@
#define cpu_scache_line_size() 0
#define cpu_has_vz 0
+#define cpu_use_kmap_coherent 0
+
#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -509,7 +509,7 @@ static inline void local_r4k_flush_cache
*/
map_coherent = (cpu_has_dc_aliases &&
page_mapped(page) && !Page_dcache_dirty(page));
- if (map_coherent)
+ if (map_coherent && cpu_use_kmap_coherent)
vaddr = kmap_coherent(page, addr);
else
vaddr = kmap_atomic(page);
@@ -532,7 +532,7 @@ static inline void local_r4k_flush_cache
}
if (vaddr) {
- if (map_coherent)
+ if (map_coherent && cpu_use_kmap_coherent)
kunmap_coherent();
else
kunmap_atomic(vaddr);
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -203,7 +203,7 @@ void copy_user_highpage(struct page *to,
void *vfrom, *vto;
vto = kmap_atomic(to);
- if (cpu_has_dc_aliases &&
+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
page_mapped(from) && !Page_dcache_dirty(from)) {
vfrom = kmap_coherent(from, vaddr);
copy_page(vto, vfrom);
@@ -225,7 +225,7 @@ void copy_to_user_page(struct vm_area_st
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)
{
- if (cpu_has_dc_aliases &&
+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
page_mapped(page) && !Page_dcache_dirty(page)) {
void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(vto, src, len);
@@ -243,7 +243,7 @@ void copy_from_user_page(struct vm_area_
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)
{
- if (cpu_has_dc_aliases &&
+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
page_mapped(page) && !Page_dcache_dirty(page)) {
void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(dst, vfrom, len);

56
target/linux/brcm47xx/patches-3.10/170-fix-74k-cpu.patch
View File

@ -1,56 +0,0 @@
From fb143ba7f7cd215bc2fc34a478c4c0b6dc56e537 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Mon, 6 Jan 2014 14:51:59 +0100
Subject: [PATCH] MIPS: BCM47XX: fix position of cpu_wait disabling
The disabling of cpu_wait was done too early, before the detection was
done. This moves the code to a position where it actually works.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
arch/mips/bcm47xx/setup.c | 34 +++++++++++++++++++++++++---------
1 file changed, 25 insertions(+), 9 deletions(-)
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -37,6 +37,7 @@
#include <asm/prom.h>
#include <asm/reboot.h>
#include <asm/time.h>
+#include <asm/idle.h>
#include <bcm47xx.h>
#include <bcm47xx_nvram.h>
#include <bcm47xx_board.h>
@@ -243,6 +244,31 @@ void __init plat_mem_setup(void)
mips_set_machine_name(bcm47xx_board_get_name());
}
+static int __init bcm47xx_cpu_fixes(void)
+{
+ switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+ case BCM47XX_BUS_TYPE_SSB:
+ /* Nothing to do */
+ break;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+ case BCM47XX_BUS_TYPE_BCMA:
+ /* The BCM4706 has a problem with the CPU wait instruction.
+ * When r4k_wait or r4k_wait_irqoff is used will just hang and
+ * not return from a msleep(). Removing the cpu_wait
+ * functionality is a workaround for this problem. The BCM4716
+ * does not have this problem.
+ */
+ if (bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4706)
+ cpu_wait = NULL;
+ break;
+#endif
+ }
+ return 0;
+}
+arch_initcall(bcm47xx_cpu_fixes);
+
static int __init bcm47xx_register_bus_complete(void)
{
switch (bcm47xx_bus_type) {

43
target/linux/brcm47xx/patches-3.10/200-b44-add-support-for-Byte-Queue-Limits.patch
View File

@ -1,43 +0,0 @@
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -596,6 +596,7 @@ static void b44_timer(unsigned long __op
static void b44_tx(struct b44 *bp)
{
u32 cur, cons;
+ unsigned bytes_compl = 0, pkts_compl = 0;
cur = br32(bp, B44_DMATX_STAT) & DMATX_STAT_CDMASK;
cur /= sizeof(struct dma_desc);
@@ -612,9 +613,14 @@ static void b44_tx(struct b44 *bp)
skb->len,
DMA_TO_DEVICE);
rp->skb = NULL;
+
+ bytes_compl += skb->len;
+ pkts_compl++;
+
dev_kfree_skb_irq(skb);
}
+ netdev_completed_queue(bp->dev, pkts_compl, bytes_compl);
bp->tx_cons = cons;
if (netif_queue_stopped(bp->dev) &&
TX_BUFFS_AVAIL(bp) > B44_TX_WAKEUP_THRESH)
@@ -1018,6 +1024,8 @@ static netdev_tx_t b44_start_xmit(struct
if (bp->flags & B44_FLAG_REORDER_BUG)
br32(bp, B44_DMATX_PTR);
+ netdev_sent_queue(dev, skb->len);
+
if (TX_BUFFS_AVAIL(bp) < 1)
netif_stop_queue(dev);
@@ -1416,6 +1424,8 @@ static void b44_init_hw(struct b44 *bp,
val = br32(bp, B44_ENET_CTRL);
bw32(bp, B44_ENET_CTRL, (val | ENET_CTRL_ENABLE));
+
+ netdev_reset_queue(bp->dev);
}
static int b44_open(struct net_device *dev)

116
target/linux/brcm47xx/patches-3.10/201-b44-check-register-instead-of-PHY-address-to-detect-.patch
View File

@ -1,116 +0,0 @@
From d61941952d5e7d062c3884e6d81bd503a37702b4 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri, 20 Dec 2013 02:16:06 +0100
Subject: [PATCH 201/208] b44: check register instead of PHY address to detect
external PHY
The Ethernet core supported by b44 supports an internal PHY integrated
into the mac core, which is supported by the b44 driver and an external
PHY to which the mac core is connected. This external PHY could be a
switch connected through MII, which is often the case when this core is
used on home routers. The usage of an external PHY was assumed when the
PHY address 30 was used and an internal PHY was assumed when the PHY
address was different. To verify that b44_phy_reset() was called and
checked if it worked, otherwise PHY address 30 was assumed, an external
PHY. It is better to check the register which says which PHY is
connected to the MAC instead of checking the PHY address.
The interface to an external PHY was only activated when this register
was set.
This also changes B44_FLAG_INTERNAL_PHY to B44_FLAG_EXTERNAL_PHY, it is
easier to check.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/broadcom/b44.c | 18 +++++++++---------
drivers/net/ethernet/broadcom/b44.h | 2 +-
2 files changed, 10 insertions(+), 10 deletions(-)
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -284,7 +284,7 @@ static int __b44_writephy(struct b44 *bp
static inline int b44_readphy(struct b44 *bp, int reg, u32 *val)
{
- if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
+ if (bp->flags & B44_FLAG_EXTERNAL_PHY)
return 0;
return __b44_readphy(bp, bp->phy_addr, reg, val);
@@ -292,7 +292,7 @@ static inline int b44_readphy(struct b44
static inline int b44_writephy(struct b44 *bp, int reg, u32 val)
{
- if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
+ if (bp->flags & B44_FLAG_EXTERNAL_PHY)
return 0;
return __b44_writephy(bp, bp->phy_addr, reg, val);
@@ -321,7 +321,7 @@ static int b44_phy_reset(struct b44 *bp)
u32 val;
int err;
- if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
+ if (bp->flags & B44_FLAG_EXTERNAL_PHY)
return 0;
err = b44_writephy(bp, MII_BMCR, BMCR_RESET);
if (err)
@@ -423,7 +423,7 @@ static int b44_setup_phy(struct b44 *bp)
b44_wap54g10_workaround(bp);
- if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
+ if (bp->flags & B44_FLAG_EXTERNAL_PHY)
return 0;
if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0)
goto out;
@@ -521,7 +521,7 @@ static void b44_check_phy(struct b44 *bp
{
u32 bmsr, aux;
- if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) {
+ if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
bp->flags |= B44_FLAG_100_BASE_T;
bp->flags |= B44_FLAG_FULL_DUPLEX;
if (!netif_carrier_ok(bp->dev)) {
@@ -1315,7 +1315,7 @@ static void b44_chip_reset(struct b44 *b
if (!(br32(bp, B44_DEVCTRL) & DEVCTRL_IPP)) {
bw32(bp, B44_ENET_CTRL, ENET_CTRL_EPSEL);
br32(bp, B44_ENET_CTRL);
- bp->flags &= ~B44_FLAG_INTERNAL_PHY;
+ bp->flags |= B44_FLAG_EXTERNAL_PHY;
} else {
u32 val = br32(bp, B44_DEVCTRL);
@@ -1324,7 +1324,7 @@ static void b44_chip_reset(struct b44 *b
br32(bp, B44_DEVCTRL);
udelay(100);
}
- bp->flags |= B44_FLAG_INTERNAL_PHY;
+ bp->flags &= ~B44_FLAG_EXTERNAL_PHY;
}
}
@@ -1828,8 +1828,8 @@ static int b44_get_settings(struct net_d
DUPLEX_FULL : DUPLEX_HALF;
cmd->port = 0;
cmd->phy_address = bp->phy_addr;
- cmd->transceiver = (bp->flags & B44_FLAG_INTERNAL_PHY) ?
- XCVR_INTERNAL : XCVR_EXTERNAL;
+ cmd->transceiver = (bp->flags & B44_FLAG_EXTERNAL_PHY) ?
+ XCVR_EXTERNAL : XCVR_INTERNAL;
cmd->autoneg = (bp->flags & B44_FLAG_FORCE_LINK) ?
AUTONEG_DISABLE : AUTONEG_ENABLE;
if (cmd->autoneg == AUTONEG_ENABLE)
--- a/drivers/net/ethernet/broadcom/b44.h
+++ b/drivers/net/ethernet/broadcom/b44.h
@@ -376,7 +376,7 @@ struct b44 {
#define B44_FLAG_ADV_10FULL 0x02000000
#define B44_FLAG_ADV_100HALF 0x04000000
#define B44_FLAG_ADV_100FULL 0x08000000
-#define B44_FLAG_INTERNAL_PHY 0x10000000
+#define B44_FLAG_EXTERNAL_PHY 0x10000000
#define B44_FLAG_RX_RING_HACK 0x20000000
#define B44_FLAG_TX_RING_HACK 0x40000000
#define B44_FLAG_WOL_ENABLE 0x80000000

43
target/linux/brcm47xx/patches-3.10/202-b44-rename-B44_PHY_ADDR_NO_PHY-to-B44_PHY_ADDR_NO_LO.patch
View File

@ -1,43 +0,0 @@
From 5ab6329c5224d8135d76da18066edf3395f679f5 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri, 20 Dec 2013 02:16:07 +0100
Subject: [PATCH 202/208] b44: rename B44_PHY_ADDR_NO_PHY to
B44_PHY_ADDR_NO_LOCAL_PHY
The PHY address 30 means there is no local PHY, but there could be an
external PHY like a switch connected via MII. This is the case on most
embedded home routers where this driver is used.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/broadcom/b44.c | 2 +-
drivers/net/ethernet/broadcom/b44.h | 6 +++---
2 files changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -2238,7 +2238,7 @@ static int b44_init_one(struct ssb_devic
/* do a phy reset to test if there is an active phy */
if (b44_phy_reset(bp) < 0)
- bp->phy_addr = B44_PHY_ADDR_NO_PHY;
+ bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
netdev_info(dev, "%s %pM\n", DRV_DESCRIPTION, dev->dev_addr);
--- a/drivers/net/ethernet/broadcom/b44.h
+++ b/drivers/net/ethernet/broadcom/b44.h
@@ -280,9 +280,9 @@ struct ring_info {
dma_addr_t mapping;
};
-#define B44_MCAST_TABLE_SIZE 32
-#define B44_PHY_ADDR_NO_PHY 30
-#define B44_MDC_RATIO 5000000
+#define B44_MCAST_TABLE_SIZE 32
+#define B44_PHY_ADDR_NO_LOCAL_PHY 30 /* no local phy regs */
+#define B44_MDC_RATIO 5000000
#define B44_STAT_REG_DECLARE \
_B44(tx_good_octets) \

41
target/linux/brcm47xx/patches-3.10/203-b44-abort-when-no-PHY-is-available-at-all.patch
View File

@ -1,41 +0,0 @@
From 7befa6abe09c84269b8af614a166409090346cf8 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri, 20 Dec 2013 02:16:08 +0100
Subject: [PATCH 203/208] b44: abort when no PHY is available at all
When the phy address is 31, this means that there is no PHY connected
to this MAC at all, no internal and no external PHY. Reading these PHY
registers causes a system reset on some routers.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/broadcom/b44.c | 6 ++++++
drivers/net/ethernet/broadcom/b44.h | 1 +
2 files changed, 7 insertions(+)
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -2207,6 +2207,12 @@ static int b44_init_one(struct ssb_devic
goto err_out_powerdown;
}
+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) {
+ dev_err(sdev->dev, "No PHY present on this MAC, aborting\n");
+ err = -ENODEV;
+ goto err_out_powerdown;
+ }
+
bp->mii_if.dev = dev;
bp->mii_if.mdio_read = b44_mii_read;
bp->mii_if.mdio_write = b44_mii_write;
--- a/drivers/net/ethernet/broadcom/b44.h
+++ b/drivers/net/ethernet/broadcom/b44.h
@@ -282,6 +282,7 @@ struct ring_info {
#define B44_MCAST_TABLE_SIZE 32
#define B44_PHY_ADDR_NO_LOCAL_PHY 30 /* no local phy regs */
+#define B44_PHY_ADDR_NO_PHY 31 /* no phy present at all */
#define B44_MDC_RATIO 5000000
#define B44_STAT_REG_DECLARE \

49
target/linux/brcm47xx/patches-3.10/204-b44-rename-b44_mii_-read-write-to-b44_mdio_-read-wri.patch
View File

@ -1,49 +0,0 @@
From 348baa6c81cf774811040e4da01438d077a08301 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri, 20 Dec 2013 02:16:09 +0100
Subject: [PATCH 204/208] b44: rename b44_mii_{read, write} to b44_mdio_{read,
write}_mii
The next patch will add these functions for phylib, and we should
rename the old ones before. This now indicates that these functions are
used for the mdio registers and on the mii interface.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/broadcom/b44.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -299,7 +299,7 @@ static inline int b44_writephy(struct b4
}
/* miilib interface */
-static int b44_mii_read(struct net_device *dev, int phy_id, int location)
+static int b44_mdio_read_mii(struct net_device *dev, int phy_id, int location)
{
u32 val;
struct b44 *bp = netdev_priv(dev);
@@ -309,8 +309,8 @@ static int b44_mii_read(struct net_devic
return val;
}
-static void b44_mii_write(struct net_device *dev, int phy_id, int location,
- int val)
+static void b44_mdio_write_mii(struct net_device *dev, int phy_id, int location,
+ int val)
{
struct b44 *bp = netdev_priv(dev);
__b44_writephy(bp, phy_id, location, val);
@@ -2214,8 +2214,8 @@ static int b44_init_one(struct ssb_devic
}
bp->mii_if.dev = dev;
- bp->mii_if.mdio_read = b44_mii_read;
- bp->mii_if.mdio_write = b44_mii_write;
+ bp->mii_if.mdio_read = b44_mdio_read_mii;
+ bp->mii_if.mdio_write = b44_mdio_write_mii;
bp->mii_if.phy_id = bp->phy_addr;
bp->mii_if.phy_id_mask = 0x1f;
bp->mii_if.reg_num_mask = 0x1f;

332
target/linux/brcm47xx/patches-3.10/205-b44-add-phylib-support.patch
View File

@ -1,332 +0,0 @@
From 86f4ea63e696db996f68d1065b55506e75a7d765 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri, 20 Dec 2013 02:16:10 +0100
Subject: [PATCH 205/208] b44: add phylib support
Most of the older home routers based on the Broadcom BCM47XX SoC series
are using a MAC that is supported by b44. On most of these routers not
the internal PHY of this MAC core is used, but a switch sometimes on an
external chip or integrated into the same SoC as the Ethernet core.
For this switch a special PHY driver is needed which should not be
integrated into b44 as the same switches are also used by other
Broadcom home networking SoCs which are using different Ethernet MAC
drivers. This was tested with the b53 switch driver which is currently
on its way to mainline.
If the internal PHY is not used, b44 will now search on the MDIO bus
for a phy and use the Linux phylib subsystem to register a driver.
Support for the internal PHY must stay here, because there are some
device which are suing the internal phy.
With this patch we scan the mdio bus when the sprom or nvram says that
the PHY address is 30, if a PHY was found at this address b44 uses it.
This was tested with a BCM4704, BCM4712 and BCM5354.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/broadcom/Kconfig | 1 +
drivers/net/ethernet/broadcom/b44.c | 190 ++++++++++++++++++++++++++++++++-
drivers/net/ethernet/broadcom/b44.h | 3 +
3 files changed, 189 insertions(+), 5 deletions(-)
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -24,6 +24,7 @@ config B44
select SSB
select NET_CORE
select MII
+ select PHYLIB
---help---
If you have a network (Ethernet) controller of this type, say Y
or M and read the Ethernet-HOWTO, available from
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -6,6 +6,7 @@
* Copyright (C) 2006 Felix Fietkau (nbd@openwrt.org)
* Copyright (C) 2006 Broadcom Corporation.
* Copyright (C) 2007 Michael Buesch <m@bues.ch>
+ * Copyright (C) 2013 Hauke Mehrtens <hauke@hauke-m.de>
*
* Distribute under GPL.
*/
@@ -29,6 +30,7 @@
#include <linux/dma-mapping.h>
#include <linux/ssb/ssb.h>
#include <linux/slab.h>
+#include <linux/phy.h>
#include <asm/uaccess.h>
#include <asm/io.h>
@@ -316,6 +318,23 @@ static void b44_mdio_write_mii(struct ne
__b44_writephy(bp, phy_id, location, val);
}
+static int b44_mdio_read_phylib(struct mii_bus *bus, int phy_id, int location)
+{
+ u32 val;
+ struct b44 *bp = bus->priv;
+ int rc = __b44_readphy(bp, phy_id, location, &val);
+ if (rc)
+ return 0xffffffff;
+ return val;
+}
+
+static int b44_mdio_write_phylib(struct mii_bus *bus, int phy_id, int location,
+ u16 val)
+{
+ struct b44 *bp = bus->priv;
+ return __b44_writephy(bp, phy_id, location, val);
+}
+
static int b44_phy_reset(struct b44 *bp)
{
u32 val;
@@ -523,10 +542,12 @@ static void b44_check_phy(struct b44 *bp
if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
bp->flags |= B44_FLAG_100_BASE_T;
- bp->flags |= B44_FLAG_FULL_DUPLEX;
if (!netif_carrier_ok(bp->dev)) {
u32 val = br32(bp, B44_TX_CTRL);
- val |= TX_CTRL_DUPLEX;
+ if (bp->flags & B44_FLAG_FULL_DUPLEX)
+ val |= TX_CTRL_DUPLEX;
+ else
+ val &= ~TX_CTRL_DUPLEX;
bw32(bp, B44_TX_CTRL, val);
netif_carrier_on(bp->dev);
b44_link_report(bp);
@@ -1805,6 +1826,11 @@ static int b44_get_settings(struct net_d
{
struct b44 *bp = netdev_priv(dev);
+ if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
+ BUG_ON(!bp->phydev);
+ return phy_ethtool_gset(bp->phydev, cmd);
+ }
+
cmd->supported = (SUPPORTED_Autoneg);
cmd->supported |= (SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
@@ -1846,7 +1872,23 @@ static int b44_get_settings(struct net_d
static int b44_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct b44 *bp = netdev_priv(dev);
- u32 speed = ethtool_cmd_speed(cmd);
+ u32 speed;
+ int ret;
+
+ if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
+ BUG_ON(!bp->phydev);
+ spin_lock_irq(&bp->lock);
+ if (netif_running(dev))
+ b44_setup_phy(bp);
+
+ ret = phy_ethtool_sset(bp->phydev, cmd);
+
+ spin_unlock_irq(&bp->lock);
+
+ return ret;
+ }
+
+ speed = ethtool_cmd_speed(cmd);
/* We do not support gigabit. */
if (cmd->autoneg == AUTONEG_ENABLE) {
@@ -2076,7 +2118,6 @@ static const struct ethtool_ops b44_etht
static int b44_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
- struct mii_ioctl_data *data = if_mii(ifr);
struct b44 *bp = netdev_priv(dev);
int err = -EINVAL;
@@ -2084,7 +2125,12 @@ static int b44_ioctl(struct net_device *
goto out;
spin_lock_irq(&bp->lock);
- err = generic_mii_ioctl(&bp->mii_if, data, cmd, NULL);
+ if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
+ BUG_ON(!bp->phydev);
+ err = phy_mii_ioctl(bp->phydev, ifr, cmd);
+ } else {
+ err = generic_mii_ioctl(&bp->mii_if, if_mii(ifr), cmd, NULL);
+ }
spin_unlock_irq(&bp->lock);
out:
return err;
@@ -2146,6 +2192,127 @@ static const struct net_device_ops b44_n
#endif
};
+static void b44_adjust_link(struct net_device *dev)
+{
+ struct b44 *bp = netdev_priv(dev);
+ struct phy_device *phydev = bp->phydev;
+ bool status_changed = 0;
+
+ BUG_ON(!phydev);
+
+ if (bp->old_link != phydev->link) {
+ status_changed = 1;
+ bp->old_link = phydev->link;
+ }
+
+ /* reflect duplex change */
+ if (phydev->link) {
+ if ((phydev->duplex == DUPLEX_HALF) &&
+ (bp->flags & B44_FLAG_FULL_DUPLEX)) {
+ status_changed = 1;
+ bp->flags &= ~B44_FLAG_FULL_DUPLEX;
+ } else if ((phydev->duplex == DUPLEX_FULL) &&
+ !(bp->flags & B44_FLAG_FULL_DUPLEX)) {
+ status_changed = 1;
+ bp->flags |= B44_FLAG_FULL_DUPLEX;
+ }
+ }
+
+ if (status_changed) {
+ b44_check_phy(bp);
+ phy_print_status(phydev);
+ }
+}
+
+static int b44_register_phy_one(struct b44 *bp)
+{
+ struct mii_bus *mii_bus;
+ struct ssb_device *sdev = bp->sdev;
+ struct phy_device *phydev;
+ char bus_id[MII_BUS_ID_SIZE + 3];
+ int err;
+
+ mii_bus = mdiobus_alloc();
+ if (!mii_bus) {
+ dev_err(sdev->dev, "mdiobus_alloc() failed\n");
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ mii_bus->priv = bp;
+ mii_bus->read = b44_mdio_read_phylib;
+ mii_bus->write = b44_mdio_write_phylib;
+ mii_bus->name = "b44_eth_mii";
+ mii_bus->parent = sdev->dev;
+ mii_bus->phy_mask = ~(1 << bp->phy_addr);
+ snprintf(mii_bus->id, MII_BUS_ID_SIZE, "%x", instance);
+ mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+ if (!mii_bus->irq) {
+ dev_err(sdev->dev, "mii_bus irq allocation failed\n");
+ err = -ENOMEM;
+ goto err_out_mdiobus;
+ }
+
+ memset(mii_bus->irq, PHY_POLL, sizeof(int) * PHY_MAX_ADDR);
+
+ bp->mii_bus = mii_bus;
+
+ err = mdiobus_register(mii_bus);
+ if (err) {
+ dev_err(sdev->dev, "failed to register MII bus\n");
+ goto err_out_mdiobus_irq;
+ }
+
+ snprintf(bus_id, sizeof(bus_id), PHY_ID_FMT, mii_bus->id, bp->phy_addr);
+
+ phydev = phy_connect(bp->dev, bus_id, &b44_adjust_link,
+ PHY_INTERFACE_MODE_MII);
+ if (IS_ERR(phydev)) {
+ dev_err(sdev->dev, "could not attach PHY at %i\n",
+ bp->phy_addr);
+ err = PTR_ERR(phydev);
+ goto err_out_mdiobus_unregister;
+ }
+
+ /* mask with MAC supported features */
+ phydev->supported &= (SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_Autoneg |
+ SUPPORTED_MII);
+ phydev->advertising = phydev->supported;
+
+ bp->phydev = phydev;
+ bp->old_link = 0;
+ bp->phy_addr = phydev->addr;
+
+ dev_info(sdev->dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
+ phydev->drv->name, dev_name(&phydev->dev));
+
+ return 0;
+
+err_out_mdiobus_unregister:
+ mdiobus_unregister(mii_bus);
+
+err_out_mdiobus_irq:
+ kfree(mii_bus->irq);
+
+err_out_mdiobus:
+ mdiobus_free(mii_bus);
+
+err_out:
+ return err;
+}
+
+static void b44_unregister_phy_one(struct b44 *bp)
+{
+ struct mii_bus *mii_bus = bp->mii_bus;
+
+ phy_disconnect(bp->phydev);
+ mdiobus_unregister(mii_bus);
+ kfree(mii_bus->irq);
+ mdiobus_free(mii_bus);
+}
+
static int b44_init_one(struct ssb_device *sdev,
const struct ssb_device_id *ent)
{
@@ -2246,10 +2413,20 @@ static int b44_init_one(struct ssb_devic
if (b44_phy_reset(bp) < 0)
bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
+ if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
+ err = b44_register_phy_one(bp);
+ if (err) {
+ dev_err(sdev->dev, "Cannot register PHY, aborting\n");
+ goto err_out_unregister_netdev;
+ }
+ }
+
netdev_info(dev, "%s %pM\n", DRV_DESCRIPTION, dev->dev_addr);
return 0;
+err_out_unregister_netdev:
+ unregister_netdev(dev);
err_out_powerdown:
ssb_bus_may_powerdown(sdev->bus);
@@ -2263,8 +2440,11 @@ out:
static void b44_remove_one(struct ssb_device *sdev)
{
struct net_device *dev = ssb_get_drvdata(sdev);
+ struct b44 *bp = netdev_priv(dev);
unregister_netdev(dev);
+ if (bp->flags & B44_FLAG_EXTERNAL_PHY)
+ b44_unregister_phy_one(bp);
ssb_device_disable(sdev, 0);
ssb_bus_may_powerdown(sdev->bus);
free_netdev(dev);
--- a/drivers/net/ethernet/broadcom/b44.h
+++ b/drivers/net/ethernet/broadcom/b44.h
@@ -397,6 +397,9 @@ struct b44 {
u32 tx_pending;
u8 phy_addr;
u8 force_copybreak;
+ struct phy_device *phydev;
+ struct mii_bus *mii_bus;
+ int old_link;
struct mii_if_info mii_if;
};

29
target/linux/brcm47xx/patches-3.10/206-b44-activate-PHY-when-MAC-is-off.patch
View File

@ -1,29 +0,0 @@
From bea69c47f5b93b3142f8833f8a34b666d5d7d6a7 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri, 20 Dec 2013 02:16:11 +0100
Subject: [PATCH 206/208] b44: activate PHY when MAC is off
Without this patch we can not access the PHY when the MAC is switched
off. This PHY access is needed to configure the switch, which is done
through PHY registers.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/broadcom/b44.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -1360,7 +1360,10 @@ static void b44_halt(struct b44 *bp)
bw32(bp, B44_MAC_CTRL, MAC_CTRL_PHY_PDOWN);
/* now reset the chip, but without enabling the MAC&PHY
* part of it. This has to be done _after_ we shut down the PHY */
- b44_chip_reset(bp, B44_CHIP_RESET_PARTIAL);
+ if (bp->flags & B44_FLAG_EXTERNAL_PHY)
+ b44_chip_reset(bp, B44_CHIP_RESET_FULL);
+ else
+ b44_chip_reset(bp, B44_CHIP_RESET_PARTIAL);
}
/* bp->lock is held. */

32
target/linux/brcm47xx/patches-3.10/207-b44-do-not-set-PHY-address-to-30-for-every-ext-PHY.patch
View File

@ -1,32 +0,0 @@
From 656a7c2b1210deddf76444ecc76e058c0404ce80 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri, 20 Dec 2013 02:16:12 +0100
Subject: [PATCH 207/208] b44: do not set PHY address to 30 for every ext PHY
b44_phy_reset() will fail for an external PHY and only work with the
internal PHY, this was an old workaround when the detection of an
external switch based on the PHY address failed and it is not needed
any more.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/broadcom/b44.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -2413,8 +2413,11 @@ static int b44_init_one(struct ssb_devic
b44_chip_reset(bp, B44_CHIP_RESET_FULL);
/* do a phy reset to test if there is an active phy */
- if (b44_phy_reset(bp) < 0)
- bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
+ err = b44_phy_reset(bp);
+ if (err < 0) {
+ dev_err(sdev->dev, "phy reset failed\n");
+ goto err_out_unregister_netdev;
+ }
if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
err = b44_register_phy_one(bp);

97
target/linux/brcm47xx/patches-3.10/208-b44-use-fixed-PHY-device-if-we-do-not-find-any.patch
View File

@ -1,97 +0,0 @@
From b04138b335203b79ffe1b14750fa245a4dab7191 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri, 20 Dec 2013 02:16:13 +0100
Subject: [PATCH 208/208] b44: use fixed PHY device if we do not find any
The ADM6996L switch and some Broadcom switches with two MII interfaces
like the BCM5325F connected to two MACs on the SoC, used on some
routers do not return a valid value when reading the PHY id register
and Linux thinks there is no PHY at all, but that is wrong.
This patch registers a fixed phy in the arch code and then searches it
when there is no other phy in the Ethernet driver code.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
arch/mips/bcm47xx/setup.c | 10 ++++++++++
drivers/net/ethernet/broadcom/b44.c | 16 +++++++++++++++-
drivers/net/ethernet/broadcom/b44.h | 3 +++
3 files changed, 28 insertions(+), 1 deletion(-)
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -30,6 +30,9 @@
#include <linux/export.h>
#include <linux/types.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
#include <linux/bcma/bcma_soc.h>
@@ -269,6 +272,12 @@ static int __init bcm47xx_cpu_fixes(void
}
arch_initcall(bcm47xx_cpu_fixes);
+static struct fixed_phy_status bcm47xx_fixed_phy_status __initdata = {
+ .link = 1,
+ .speed = SPEED_100,
+ .duplex = DUPLEX_FULL,
+};
+
static int __init bcm47xx_register_bus_complete(void)
{
switch (bcm47xx_bus_type) {
@@ -287,6 +296,7 @@ static int __init bcm47xx_register_bus_c
bcm47xx_buttons_register();
bcm47xx_leds_register();
bcm47xx_workarounds();
+ fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);
return 0;
}
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -2233,6 +2233,7 @@ static int b44_register_phy_one(struct b
struct ssb_device *sdev = bp->sdev;
struct phy_device *phydev;
char bus_id[MII_BUS_ID_SIZE + 3];
+ struct ssb_sprom *sprom = &sdev->bus->sprom;
int err;
mii_bus = mdiobus_alloc();
@@ -2266,7 +2267,20 @@ static int b44_register_phy_one(struct b
goto err_out_mdiobus_irq;
}
- snprintf(bus_id, sizeof(bus_id), PHY_ID_FMT, mii_bus->id, bp->phy_addr);
+ if (!bp->mii_bus->phy_map[bp->phy_addr] &&
+ (sprom->boardflags_lo & (B44_BOARDFLAG_ROBO | B44_BOARDFLAG_ADM))) {
+
+ dev_info(sdev->dev,
+ "could not find PHY at %i, use fixed one\n",
+ bp->phy_addr);
+
+ bp->phy_addr = 0;
+ snprintf(bus_id, sizeof(bus_id), PHY_ID_FMT, "fixed-0",
+ bp->phy_addr);
+ } else {
+ snprintf(bus_id, sizeof(bus_id), PHY_ID_FMT, mii_bus->id,
+ bp->phy_addr);
+ }
phydev = phy_connect(bp->dev, bus_id, &b44_adjust_link,
PHY_INTERFACE_MODE_MII);
--- a/drivers/net/ethernet/broadcom/b44.h
+++ b/drivers/net/ethernet/broadcom/b44.h
@@ -345,6 +345,9 @@ B44_STAT_REG_DECLARE
struct u64_stats_sync syncp;
};
+#define B44_BOARDFLAG_ROBO 0x0010 /* Board has robo switch */
+#define B44_BOARDFLAG_ADM 0x0080 /* Board has ADMtek switch */
+
struct ssb_device;
struct b44 {

122
target/linux/brcm47xx/patches-3.10/209-b44-register-adm-switch.patch
View File

@ -1,122 +0,0 @@
From b36f694256f41bc71571f467646d015dda128d14 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat, 9 Nov 2013 17:03:59 +0100
Subject: [PATCH 210/210] b44: register adm switch
---
drivers/net/ethernet/broadcom/b44.c | 57 +++++++++++++++++++++++++++++++++++
drivers/net/ethernet/broadcom/b44.h | 3 ++
2 files changed, 60 insertions(+)
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -31,6 +31,8 @@
#include <linux/ssb/ssb.h>
#include <linux/slab.h>
#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/adm6996-gpio.h>
#include <asm/uaccess.h>
#include <asm/io.h>
@@ -2227,6 +2229,70 @@ static void b44_adjust_link(struct net_d
}
}
+#ifdef CONFIG_BCM47XX
+static int b44_register_adm_switch(struct b44 *bp)
+{
+ int gpio;
+ struct platform_device *pdev;
+ struct adm6996_gpio_platform_data adm_data = {0};
+ struct platform_device_info info = {0};
+
+ adm_data.model = ADM6996L;
+ gpio = bcm47xx_nvram_gpio_pin("adm_eecs");
+ if (gpio >= 0)
+ adm_data.eecs = gpio;
+ else
+ adm_data.eecs = 2;
+
+ gpio = bcm47xx_nvram_gpio_pin("adm_eesk");
+ if (gpio >= 0)
+ adm_data.eesk = gpio;
+ else
+ adm_data.eesk = 3;
+
+ gpio = bcm47xx_nvram_gpio_pin("adm_eedi");
+ if (gpio >= 0)
+ adm_data.eedi = gpio;
+ else
+ adm_data.eedi = 4;
+
+ gpio = bcm47xx_nvram_gpio_pin("adm_rc");
+ if (gpio >= 0)
+ adm_data.eerc = gpio;
+ else
+ adm_data.eerc = 5;
+
+ info.parent = bp->sdev->dev;
+ info.name = "adm6996_gpio";
+ info.id = -1;
+ info.data = &adm_data;
+ info.size_data = sizeof(adm_data);
+
+ if (!bp->adm_switch) {
+ pdev = platform_device_register_full(&info);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ bp->adm_switch = pdev;
+ }
+ return 0;
+}
+static void b44_unregister_adm_switch(struct b44 *bp)
+{
+ if (bp->adm_switch)
+ platform_device_unregister(bp->adm_switch);
+}
+#else
+static int b44_register_adm_switch(struct b44 *bp)
+{
+ return 0;
+}
+static void b44_unregister_adm_switch(struct b44 *bp)
+{
+
+}
+#endif /* CONFIG_BCM47XX */
+
static int b44_register_phy_one(struct b44 *bp)
{
struct mii_bus *mii_bus;
@@ -2270,6 +2336,9 @@ static int b44_register_phy_one(struct b
if (!bp->mii_bus->phy_map[bp->phy_addr] &&
(sprom->boardflags_lo & (B44_BOARDFLAG_ROBO | B44_BOARDFLAG_ADM))) {
+ if (sprom->boardflags_lo & B44_BOARDFLAG_ADM)
+ b44_register_adm_switch(bp);
+
dev_info(sdev->dev,
"could not find PHY at %i, use fixed one\n",
bp->phy_addr);
@@ -2465,6 +2534,7 @@ static void b44_remove_one(struct ssb_de
unregister_netdev(dev);
if (bp->flags & B44_FLAG_EXTERNAL_PHY)
b44_unregister_phy_one(bp);
+ b44_unregister_adm_switch(bp);
ssb_device_disable(sdev, 0);
ssb_bus_may_powerdown(sdev->bus);
free_netdev(dev);
--- a/drivers/net/ethernet/broadcom/b44.h
+++ b/drivers/net/ethernet/broadcom/b44.h
@@ -404,6 +404,9 @@ struct b44 {
struct mii_bus *mii_bus;
int old_link;
struct mii_if_info mii_if;
+
+ /* platform device for associated switch */
+ struct platform_device *adm_switch;
};
#endif /* _B44_H */

54
target/linux/brcm47xx/patches-3.10/210-b44_phy_fix.patch
View File

@ -1,54 +0,0 @@
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -431,10 +431,34 @@ static void b44_wap54g10_workaround(stru
error:
pr_warning("PHY: cannot reset MII transceiver isolate bit\n");
}
+
+static void b44_bcm47xx_workarounds(struct b44 *bp)
+{
+ char buf[20];
+ struct ssb_device *sdev = bp->sdev;
+
+ /* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
+ if (sdev->bus->sprom.board_num == 100) {
+ bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
+ } else {
+ /* WL-HDD */
+ if (bcm47xx_nvram_getenv("hardware_version", buf, sizeof(buf)) >= 0 &&
+ !strncmp(buf, "WL300-", strlen("WL300-"))) {
+ if (sdev->bus->sprom.et0phyaddr == 0 &&
+ sdev->bus->sprom.et1phyaddr == 1)
+ bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
+ }
+ }
+ return;
+}
#else
static inline void b44_wap54g10_workaround(struct b44 *bp)
{
}
+
+static inline void b44_bcm47xx_workarounds(struct b44 *bp)
+{
+}
#endif
static int b44_setup_phy(struct b44 *bp)
@@ -443,6 +467,7 @@ static int b44_setup_phy(struct b44 *bp)
int err;
b44_wap54g10_workaround(bp);
+ b44_bcm47xx_workarounds(bp);
if (bp->flags & B44_FLAG_EXTERNAL_PHY)
return 0;
@@ -2162,6 +2187,8 @@ static int b44_get_invariants(struct b44
* valid PHY address. */
bp->phy_addr &= 0x1F;
+ b44_bcm47xx_workarounds(bp);
+
memcpy(bp->dev->dev_addr, addr, 6);
if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){

47
target/linux/brcm47xx/patches-3.10/211-b44-start_phy.patch
View File

@ -1,47 +0,0 @@
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -576,7 +576,6 @@ static void b44_check_phy(struct b44 *bp
else
val &= ~TX_CTRL_DUPLEX;
bw32(bp, B44_TX_CTRL, val);
- netif_carrier_on(bp->dev);
b44_link_report(bp);
}
return;
@@ -1511,6 +1510,10 @@ static int b44_open(struct net_device *d
add_timer(&bp->timer);
b44_enable_ints(bp);
+
+ if (bp->flags & B44_FLAG_EXTERNAL_PHY)
+ phy_start(bp->phydev);
+
netif_start_queue(dev);
out:
return err;
@@ -1673,6 +1676,9 @@ static int b44_close(struct net_device *
netif_stop_queue(dev);
+ if (bp->flags & B44_FLAG_EXTERNAL_PHY)
+ phy_stop(bp->phydev);
+
napi_disable(&bp->napi);
del_timer_sync(&bp->timer);
@@ -2251,8 +2257,13 @@ static void b44_adjust_link(struct net_d
}
if (status_changed) {
- b44_check_phy(bp);
- phy_print_status(phydev);
+ u32 val = br32(bp, B44_TX_CTRL);
+ if (bp->flags & B44_FLAG_FULL_DUPLEX)
+ val |= TX_CTRL_DUPLEX;
+ else
+ val &= ~TX_CTRL_DUPLEX;
+ bw32(bp, B44_TX_CTRL, val);
+ b44_link_report(bp);
}
}

25
target/linux/brcm47xx/patches-3.10/280-activate_ssb_support_in_usb.patch
View File

@ -1,25 +0,0 @@
This prevents the options from being delete with make kernel_oldconfig.
---
drivers/ssb/Kconfig | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -38,6 +38,7 @@ config BCMA_DRIVER_PCI_HOSTMODE
config BCMA_HOST_SOC
bool "Support for BCMA in a SoC"
depends on BCMA
+ select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD
help
Host interface for a Broadcom AIX bus directly mapped into
the memory. This only works with the Broadcom SoCs from the
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -146,6 +146,7 @@ config SSB_SFLASH
config SSB_EMBEDDED
bool
depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
+ select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD
default y
config SSB_DRIVER_EXTIF

11
target/linux/brcm47xx/patches-3.10/300-fork_cacheflush.patch
View File

@ -1,11 +0,0 @@
--- a/arch/mips/include/asm/cacheflush.h
+++ b/arch/mips/include/asm/cacheflush.h
@@ -32,7 +32,7 @@
extern void (*flush_cache_all)(void);
extern void (*__flush_cache_all)(void);
extern void (*flush_cache_mm)(struct mm_struct *mm);
-#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0)
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
extern void (*flush_cache_range)(struct vm_area_struct *vma,
unsigned long start, unsigned long end);
extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);

66
target/linux/brcm47xx/patches-3.10/310-no_highpage.patch
View File

@ -1,66 +0,0 @@
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -46,6 +46,7 @@
#endif /* CONFIG_MIPS_HUGE_TLB_SUPPORT */
#include <linux/pfn.h>
+#include <asm/cpu-features.h>
extern void build_clear_page(void);
extern void build_copy_page(void);
@@ -80,13 +81,16 @@ static inline void clear_user_page(void
flush_data_cache_page((unsigned long)addr);
}
-extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
- struct page *to);
-struct vm_area_struct;
-extern void copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr, struct vm_area_struct *vma);
+static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+ struct page *to)
+{
+ extern void (*flush_data_cache_page)(unsigned long addr);
-#define __HAVE_ARCH_COPY_USER_HIGHPAGE
+ copy_page(vto, vfrom);
+ if (!cpu_has_ic_fills_f_dc ||
+ pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
+ flush_data_cache_page((unsigned long)vto);
+}
/*
* These are used to make use of C type-checking..
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -197,30 +197,6 @@ void kunmap_coherent(void)
preempt_check_resched();
}
-void copy_user_highpage(struct page *to, struct page *from,
- unsigned long vaddr, struct vm_area_struct *vma)
-{
- void *vfrom, *vto;
-
- vto = kmap_atomic(to);
- if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- page_mapped(from) && !Page_dcache_dirty(from)) {
- vfrom = kmap_coherent(from, vaddr);
- copy_page(vto, vfrom);
- kunmap_coherent();
- } else {
- vfrom = kmap_atomic(from);
- copy_page(vto, vfrom);
- kunmap_atomic(vfrom);
- }
- if ((!cpu_has_ic_fills_f_dc) ||
- pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
- flush_data_cache_page((unsigned long)vto);
- kunmap_atomic(vto);
- /* Make sure this page is cleared on other CPU's too before using it */
- smp_wmb();
-}
-
void copy_to_user_page(struct vm_area_struct *vma,
struct page *page, unsigned long vaddr, void *dst, const void *src,
unsigned long len)

14
target/linux/brcm47xx/patches-3.10/610-pci_ide_fix.patch
View File

@ -1,14 +0,0 @@
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -195,7 +195,11 @@ static inline void ide_std_init_ports(st
hw->io_ports.ctl_addr = ctl_addr;
}
+#if defined CONFIG_BCM47XX
+# define MAX_HWIFS 2
+#else
#define MAX_HWIFS 10
+#endif
/*
* Now for the data we need to maintain per-drive: ide_drive_t

197
target/linux/brcm47xx/patches-3.10/790-tg3-phylib.patch
View File

@ -1,197 +0,0 @@
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -1367,7 +1367,7 @@ static int tg3_mdio_read(struct mii_bus
spin_lock_bh(&tp->lock);
- if (tg3_readphy(tp, reg, &val))
+ if (__tg3_readphy(tp, mii_id, reg, &val))
val = -EIO;
spin_unlock_bh(&tp->lock);
@@ -1382,7 +1382,7 @@ static int tg3_mdio_write(struct mii_bus
spin_lock_bh(&tp->lock);
- if (tg3_writephy(tp, reg, val))
+ if (__tg3_writephy(tp, mii_id, reg, val))
ret = -EIO;
spin_unlock_bh(&tp->lock);
@@ -1400,7 +1400,7 @@ static void tg3_mdio_config_5785(struct
u32 val;
struct phy_device *phydev;
- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
switch (phydev->drv->phy_id & phydev->drv->phy_id_mask) {
case PHY_ID_BCM50610:
case PHY_ID_BCM50610M:
@@ -1505,6 +1505,13 @@ static int tg3_mdio_init(struct tg3 *tp)
TG3_CPMU_PHY_STRAP_IS_SERDES;
if (is_serdes)
tp->phy_addr += 7;
+ } else if (tg3_flag(tp, IS_SSB_CORE) && tg3_flag(tp, ROBOSWITCH)) {
+ int addr;
+
+ addr = ssb_gige_get_phyaddr(tp->pdev);
+ if (addr < 0)
+ return addr;
+ tp->phy_addr = addr;
} else
tp->phy_addr = TG3_PHY_MII_ADDR;
@@ -1525,7 +1532,7 @@ static int tg3_mdio_init(struct tg3 *tp)
tp->mdio_bus->read = &tg3_mdio_read;
tp->mdio_bus->write = &tg3_mdio_write;
tp->mdio_bus->reset = &tg3_mdio_reset;
- tp->mdio_bus->phy_mask = ~(1 << TG3_PHY_MII_ADDR);
+ tp->mdio_bus->phy_mask = ~(1 << tp->phy_addr);
tp->mdio_bus->irq = &tp->mdio_irq[0];
for (i = 0; i < PHY_MAX_ADDR; i++)
@@ -1546,7 +1553,7 @@ static int tg3_mdio_init(struct tg3 *tp)
return i;
}
- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
if (!phydev || !phydev->drv) {
dev_warn(&tp->pdev->dev, "No PHY devices\n");
@@ -1963,7 +1970,7 @@ static void tg3_setup_flow_control(struc
u32 old_tx_mode = tp->tx_mode;
if (tg3_flag(tp, USE_PHYLIB))
- autoneg = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]->autoneg;
+ autoneg = tp->mdio_bus->phy_map[tp->phy_addr]->autoneg;
else
autoneg = tp->link_config.autoneg;
@@ -1999,7 +2006,7 @@ static void tg3_adjust_link(struct net_d
u8 oldflowctrl, linkmesg = 0;
u32 mac_mode, lcl_adv, rmt_adv;
struct tg3 *tp = netdev_priv(dev);
- struct phy_device *phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
+ struct phy_device *phydev = tp->mdio_bus->phy_map[tp->phy_addr];
spin_lock_bh(&tp->lock);
@@ -2088,7 +2095,7 @@ static int tg3_phy_init(struct tg3 *tp)
/* Bring the PHY back to a known state. */
tg3_bmcr_reset(tp);
- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
/* Attach the MAC to the PHY. */
phydev = phy_connect(tp->dev, dev_name(&phydev->dev),
@@ -2115,7 +2122,7 @@ static int tg3_phy_init(struct tg3 *tp)
SUPPORTED_Asym_Pause);
break;
default:
- phy_disconnect(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]);
+ phy_disconnect(tp->mdio_bus->phy_map[tp->phy_addr]);
return -EINVAL;
}
@@ -2133,7 +2140,7 @@ static void tg3_phy_start(struct tg3 *tp
if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
return;
- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) {
tp->phy_flags &= ~TG3_PHYFLG_IS_LOW_POWER;
@@ -2153,13 +2160,13 @@ static void tg3_phy_stop(struct tg3 *tp)
if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
return;
- phy_stop(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]);
+ phy_stop(tp->mdio_bus->phy_map[tp->phy_addr]);
}
static void tg3_phy_fini(struct tg3 *tp)
{
if (tp->phy_flags & TG3_PHYFLG_IS_CONNECTED) {
- phy_disconnect(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]);
+ phy_disconnect(tp->mdio_bus->phy_map[tp->phy_addr]);
tp->phy_flags &= ~TG3_PHYFLG_IS_CONNECTED;
}
}
@@ -3999,7 +4006,7 @@ static int tg3_power_down_prepare(struct
struct phy_device *phydev;
u32 phyid, advertising;
- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
tp->phy_flags |= TG3_PHYFLG_IS_LOW_POWER;
@@ -11782,7 +11789,7 @@ static int tg3_get_settings(struct net_d
struct phy_device *phydev;
if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
return -EAGAIN;
- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
return phy_ethtool_gset(phydev, cmd);
}
@@ -11849,7 +11856,7 @@ static int tg3_set_settings(struct net_d
struct phy_device *phydev;
if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
return -EAGAIN;
- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
return phy_ethtool_sset(phydev, cmd);
}
@@ -12006,7 +12013,7 @@ static int tg3_nway_reset(struct net_dev
if (tg3_flag(tp, USE_PHYLIB)) {
if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
return -EAGAIN;
- r = phy_start_aneg(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]);
+ r = phy_start_aneg(tp->mdio_bus->phy_map[tp->phy_addr]);
} else {
u32 bmcr;
@@ -12124,7 +12131,7 @@ static int tg3_set_pauseparam(struct net
u32 newadv;
struct phy_device *phydev;
- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
if (!(phydev->supported & SUPPORTED_Pause) ||
(!(phydev->supported & SUPPORTED_Asym_Pause) &&
@@ -13558,7 +13565,7 @@ static int tg3_ioctl(struct net_device *
struct phy_device *phydev;
if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
return -EAGAIN;
- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
return phy_mii_ioctl(phydev, ifr, cmd);
}
@@ -17194,8 +17201,10 @@ static int tg3_init_one(struct pci_dev *
tg3_flag_set(tp, FLUSH_POSTED_WRITES);
if (ssb_gige_one_dma_at_once(pdev))
tg3_flag_set(tp, ONE_DMA_AT_ONCE);
- if (ssb_gige_have_roboswitch(pdev))
+ if (ssb_gige_have_roboswitch(pdev)) {
+ tg3_flag_set(tp, USE_PHYLIB);
tg3_flag_set(tp, ROBOSWITCH);
+ }
if (ssb_gige_is_rgmii(pdev))
tg3_flag_set(tp, RGMII_MODE);
}
@@ -17464,7 +17473,7 @@ static int tg3_init_one(struct pci_dev *
if (tp->phy_flags & TG3_PHYFLG_IS_CONNECTED) {
struct phy_device *phydev;
- phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
+ phydev = tp->mdio_bus->phy_map[tp->phy_addr];
netdev_info(dev,
"attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
phydev->drv->name, dev_name(&phydev->dev));

17
target/linux/brcm47xx/patches-3.10/791-tg3-no-pci-sleep.patch
View File

@ -1,17 +0,0 @@
When the Ethernet controller is powered down and someone wants to
access the mdio bus like the witch driver (b53) the system crashed if
PCI_D3hot was set before. This patch deactivates this power sawing mode
when a switch driver is in use.
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -4221,7 +4221,8 @@ static void tg3_power_down(struct tg3 *t
tg3_power_down_prepare(tp);
pci_wake_from_d3(tp->pdev, tg3_flag(tp, WOL_ENABLE));
- pci_set_power_state(tp->pdev, PCI_D3hot);
+ if (!tg3_flag(tp, ROBOSWITCH))
+ pci_set_power_state(tp->pdev, PCI_D3hot);
}
static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8 *duplex)

296
target/linux/brcm47xx/patches-3.10/820-wgt634u-nvram-fix.patch
View File

@ -1,296 +0,0 @@
The Netgear wgt634u uses a different format for storing the
configuration. This patch is needed to read out the correct
configuration. The cfe_env.c file uses a different method way to read
out the configuration than the in kernel cfe config reader.
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -5,3 +5,4 @@
obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
obj-y += board.o buttons.o leds.o workarounds.o
+obj-y += cfe_env.o
--- /dev/null
+++ b/arch/mips/bcm47xx/cfe_env.c
@@ -0,0 +1,229 @@
+/*
+ * CFE environment variable access
+ *
+ * Copyright 2001-2003, Broadcom Corporation
+ * Copyright 2006, Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#define NVRAM_SIZE (0x1ff0)
+static char _nvdata[NVRAM_SIZE];
+static char _valuestr[256];
+
+/*
+ * TLV types. These codes are used in the "type-length-value"
+ * encoding of the items stored in the NVRAM device (flash or EEPROM)
+ *
+ * The layout of the flash/nvram is as follows:
+ *
+ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
+ *
+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
+ * The "length" field marks the length of the data section, not
+ * including the type and length fields.
+ *
+ * Environment variables are stored as follows:
+ *
+ * <type_env> <length> <flags> <name> = <value>
+ *
+ * If bit 0 (low bit) is set, the length is an 8-bit value.
+ * If bit 0 (low bit) is clear, the length is a 16-bit value
+ *
+ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still
+ * indicates the size of the length field.
+ *
+ * Flags are from the constants below:
+ *
+ */
+#define ENV_LENGTH_16BITS 0x00 /* for low bit */
+#define ENV_LENGTH_8BITS 0x01
+
+#define ENV_TYPE_USER 0x80
+
+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
+
+/*
+ * The actual TLV types we support
+ */
+
+#define ENV_TLV_TYPE_END 0x00
+#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
+
+/*
+ * Environment variable flags
+ */
+
+#define ENV_FLG_NORMAL 0x00 /* normal read/write */
+#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */
+#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */
+
+#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */
+#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */
+
+
+/* *********************************************************************
+ * _nvram_read(buffer,offset,length)
+ *
+ * Read data from the NVRAM device
+ *
+ * Input parameters:
+ * buffer - destination buffer
+ * offset - offset of data to read
+ * length - number of bytes to read
+ *
+ * Return value:
+ * number of bytes read, or <0 if error occured
+ ********************************************************************* */
+static int
+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
+{
+ int i;
+ if (offset > NVRAM_SIZE)
+ return -1;
+
+ for ( i = 0; i < length; i++) {
+ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
+ }
+ return length;
+}
+
+
+static char*
+_strnchr(const char *dest,int c,size_t cnt)
+{
+ while (*dest && (cnt > 0)) {
+ if (*dest == c) return (char *) dest;
+ dest++;
+ cnt--;
+ }
+ return NULL;
+}
+
+
+
+/*
+ * Core support API: Externally visible.
+ */
+
+/*
+ * Get the value of an NVRAM variable
+ * @param name name of variable to get
+ * @return value of variable or NULL if undefined
+ */
+
+char*
+cfe_env_get(unsigned char *nv_buf, char* name)
+{
+ int size;
+ unsigned char *buffer;
+ unsigned char *ptr;
+ unsigned char *envval;
+ unsigned int reclen;
+ unsigned int rectype;
+ int offset;
+ int flg;
+
+ if (!strcmp(name, "nvram_type"))
+ return "cfe";
+
+ size = NVRAM_SIZE;
+ buffer = &_nvdata[0];
+
+ ptr = buffer;
+ offset = 0;
+
+ /* Read the record type and length */
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
+ goto error;
+ }
+
+ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) {
+
+ /* Adjust pointer for TLV type */
+ rectype = *(ptr);
+ offset++;
+ size--;
+
+ /*
+ * Read the length. It can be either 1 or 2 bytes
+ * depending on the code
+ */
+ if (rectype & ENV_LENGTH_8BITS) {
+ /* Read the record type and length - 8 bits */
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
+ goto error;
+ }
+ reclen = *(ptr);
+ size--;
+ offset++;
+ }
+ else {
+ /* Read the record type and length - 16 bits, MSB first */
+ if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
+ goto error;
+ }
+ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
+ size -= 2;
+ offset += 2;
+ }
+
+ if (reclen > size)
+ break; /* should not happen, bad NVRAM */
+
+ switch (rectype) {
+ case ENV_TLV_TYPE_ENV:
+ /* Read the TLV data */
+ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
+ goto error;
+ flg = *ptr++;
+ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
+ if (envval) {
+ *envval++ = '\0';
+ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
+ _valuestr[(reclen-1)-(envval-ptr)] = '\0';
+#if 0
+ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
+#endif
+ if(!strcmp(ptr, name)){
+ return _valuestr;
+ }
+ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
+ return _valuestr;
+ }
+ break;
+
+ default:
+ /* Unknown TLV type, skip it. */
+ break;
+ }
+
+ /*
+ * Advance to next TLV
+ */
+
+ size -= (int)reclen;
+ offset += reclen;
+
+ /* Read the next record type */
+ ptr = buffer;
+ if (_nvram_read(nv_buf, ptr,offset,1) != 1)
+ goto error;
+ }
+
+error:
+ return NULL;
+
+}
+
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -22,6 +22,8 @@
#include <asm/mach-bcm47xx/bcm47xx.h>
static char nvram_buf[NVRAM_SPACE];
+static int cfe_env;
+extern char *cfe_env_get(char *nv_buf, const char *name);
static u32 find_nvram_size(u32 end)
{
@@ -47,6 +49,26 @@ static int nvram_find_and_copy(u32 base,
u32 *src, *dst;
u32 size;
+ cfe_env = 0;
+
+ /* XXX: hack for supporting the CFE environment stuff on WGT634U */
+ if (lim >= 8 * 1024 * 1024) {
+ src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000);
+ dst = (u32 *) nvram_buf;
+
+ if ((*src & 0xff00ff) == 0x000001) {
+ printk("early_nvram_init: WGT634U NVRAM found.\n");
+
+ for (i = 0; i < 0x1ff0; i++) {
+ if (*src == 0xFFFFFFFF)
+ break;
+ *dst++ = *src++;
+ }
+ cfe_env = 1;
+ return 0;
+ }
+ }
+
/* TODO: when nvram is on nand flash check for bad blocks first. */
off = FLASH_MIN;
while (off <= lim) {
@@ -173,6 +195,13 @@ int bcm47xx_nvram_getenv(char *name, cha
return err;
}
+ if (cfe_env) {
+ value = cfe_env_get(nvram_buf, name);
+ if (!value)
+ return -ENOENT;
+ return snprintf(val, val_len, "%s", value);
+ }
+
/* Look for name=value and return value */
var = &nvram_buf[sizeof(struct nvram_header)];
end = nvram_buf + sizeof(nvram_buf) - 2;

101
target/linux/brcm47xx/patches-3.10/830-huawei_e970_support.patch
View File

@ -1,101 +0,0 @@
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -36,6 +36,7 @@
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
#include <linux/bcma/bcma_soc.h>
+#include <linux/gpio_wdt.h>
#include <asm/bootinfo.h>
#include <asm/prom.h>
#include <asm/reboot.h>
@@ -278,6 +279,33 @@ static struct fixed_phy_status bcm47xx_f
.duplex = DUPLEX_FULL,
};
+static struct gpio_wdt_platform_data gpio_wdt_data;
+
+static struct platform_device gpio_wdt_device = {
+ .name = "gpio-wdt",
+ .id = 0,
+ .dev = {
+ .platform_data = &gpio_wdt_data,
+ },
+};
+
+static int __init bcm47xx_register_gpio_watchdog(void)
+{
+ enum bcm47xx_board board = bcm47xx_board_get();
+
+ switch (board) {
+ case BCM47XX_BOARD_HUAWEI_E970:
+ pr_info("bcm47xx: detected Huawei E970 or similar, starting early gpio_wdt timer\n");
+ gpio_wdt_data.gpio = 7;
+ gpio_wdt_data.interval = HZ;
+ gpio_wdt_data.first_interval = HZ / 5;
+ return platform_device_register(&gpio_wdt_device);
+ default:
+ /* Nothing to do */
+ return 0;
+ }
+}
+
static int __init bcm47xx_register_bus_complete(void)
{
switch (bcm47xx_bus_type) {
@@ -297,6 +325,7 @@ static int __init bcm47xx_register_bus_c
bcm47xx_leds_register();
bcm47xx_workarounds();
fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);
+ bcm47xx_register_gpio_watchdog();
return 0;
}
--- a/arch/mips/configs/bcm47xx_defconfig
+++ b/arch/mips/configs/bcm47xx_defconfig
@@ -379,6 +379,7 @@ CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_BCM47XX_WDT=y
+CONFIG_GPIO_WDT=y
CONFIG_SSB_DRIVER_GIGE=y
CONFIG_DISPLAY_SUPPORT=m
CONFIG_SOUND=m
--- a/drivers/ssb/embedded.c
+++ b/drivers/ssb/embedded.c
@@ -34,11 +34,36 @@ int ssb_watchdog_timer_set(struct ssb_bu
}
EXPORT_SYMBOL(ssb_watchdog_timer_set);
+#ifdef CONFIG_BCM47XX
+#include <bcm47xx_board.h>
+
+static bool ssb_watchdog_supported(void)
+{
+ enum bcm47xx_board board = bcm47xx_board_get();
+
+ /* The Huawei E970 has a hardware watchdog using a GPIO */
+ switch (board) {
+ case BCM47XX_BOARD_HUAWEI_E970:
+ return false;
+ default:
+ return true;
+ }
+}
+#else
+static bool ssb_watchdog_supported(void)
+{
+ return true;
+}
+#endif
+
int ssb_watchdog_register(struct ssb_bus *bus)
{
struct bcm47xx_wdt wdt = {};
struct platform_device *pdev;
+ if (!ssb_watchdog_supported())
+ return 0;
+
if (ssb_chipco_available(&bus->chipco)) {
wdt.driver_data = &bus->chipco;
wdt.timer_set = ssb_chipco_watchdog_timer_set_wdt;

138
target/linux/brcm47xx/patches-3.10/920-cache-wround.patch
View File

@ -1,138 +0,0 @@
--- a/arch/mips/include/asm/r4kcache.h
+++ b/arch/mips/include/asm/r4kcache.h
@@ -20,10 +20,28 @@
#ifdef CONFIG_BCM47XX
#include <asm/paccess.h>
#include <linux/ssb/ssb.h>
-#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
+#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg()
+
+static inline unsigned long bcm4710_dummy_rreg(void)
+{
+ return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE));
+}
+
+#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr))
+
+static inline unsigned long bcm4710_fill_tlb(void *addr)
+{
+ return *(unsigned long *)addr;
+}
+
+#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr))
+
+static inline void bcm4710_protected_fill_tlb(void *addr)
+{
+ unsigned long x;
+ get_dbe(x, (unsigned long *)addr);;
+}
-#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
-#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
#else
#define BCM4710_DUMMY_RREG()
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -969,6 +969,9 @@ build_get_pgde32(u32 **p, unsigned int t
#endif
uasm_i_addu(p, ptr, tmp, ptr);
#else
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(p);
+#endif
UASM_i_LA_mostly(p, ptr, pgdc);
#endif
uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
@@ -1311,12 +1314,12 @@ static void __cpuinit build_r4000_tlb_re
/* No need for uasm_i_nop */
}
-#ifdef CONFIG_BCM47XX
- uasm_i_nop(&p);
-#endif
#ifdef CONFIG_64BIT
build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
#else
+# ifdef CONFIG_BCM47XX
+ uasm_i_nop(&p);
+# endif
build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
#endif
@@ -1328,6 +1331,9 @@ static void __cpuinit build_r4000_tlb_re
build_update_entries(&p, K0, K1);
build_tlb_write_entry(&p, &l, &r, tlb_random);
uasm_l_leave(&l, p);
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(&p);
+#endif
uasm_i_eret(&p); /* return from trap */
}
#ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
@@ -1845,12 +1851,12 @@ build_r4000_tlbchange_handler_head(u32 *
{
struct work_registers wr = build_get_work_registers(p);
-#ifdef CONFIG_BCM47XX
- uasm_i_nop(p);
-#endif
#ifdef CONFIG_64BIT
build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
#else
+# ifdef CONFIG_BCM47XX
+ uasm_i_nop(p);
+# endif
build_get_pgde32(p, wr.r1, wr.r2); /* get pgd in ptr */
#endif
@@ -1889,6 +1895,9 @@ build_r4000_tlbchange_handler_tail(u32 *
build_tlb_write_entry(p, l, r, tlb_indexed);
uasm_l_leave(l, *p);
build_restore_work_registers(p);
+#ifdef CONFIG_BCM47XX
+ uasm_i_nop(p);
+#endif
uasm_i_eret(p); /* return from trap */
#ifdef CONFIG_64BIT
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -21,6 +21,19 @@
#include <asm/war.h>
#include <asm/thread_info.h>
+#ifdef CONFIG_BCM47XX
+# ifdef eret
+# undef eret
+# endif
+# define eret \
+ .set push; \
+ .set noreorder; \
+ nop; \
+ nop; \
+ eret; \
+ .set pop;
+#endif
+
#ifdef CONFIG_MIPS_MT_SMTC
#define PANIC_PIC(msg) \
.set push; \
@@ -48,7 +61,6 @@ NESTED(except_vec3_generic, 0, sp)
.set noat
#ifdef CONFIG_BCM47XX
nop
- nop
#endif
#if R5432_CP0_INTERRUPT_WAR
mfc0 k0, CP0_INDEX
@@ -73,6 +85,9 @@ NESTED(except_vec3_r4000, 0, sp)
.set push
.set mips3
.set noat
+#ifdef CONFIG_BCM47XX
+ nop
+#endif
mfc0 k1, CP0_CAUSE
li k0, 31<<2
andi k1, k1, 0x7c

46
target/linux/brcm47xx/patches-3.10/940-bcm47xx-yenta.patch
View File

@ -1,46 +0,0 @@
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -920,6 +920,8 @@ static unsigned int yenta_probe_irq(stru
* Probe for usable interrupts using the force
* register to generate bogus card status events.
*/
+#ifndef CONFIG_BCM47XX
+ /* WRT54G3G does not like this */
cb_writel(socket, CB_SOCKET_EVENT, -1);
cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
reg = exca_readb(socket, I365_CSCINT);
@@ -935,6 +937,7 @@ static unsigned int yenta_probe_irq(stru
}
cb_writel(socket, CB_SOCKET_MASK, 0);
exca_writeb(socket, I365_CSCINT, reg);
+#endif
mask = probe_irq_mask(val) & 0xffff;
@@ -1019,6 +1022,10 @@ static void yenta_get_socket_capabilitie
else
socket->socket.irq_mask = 0;
+ /* irq mask probing is broken for the WRT54G3G */
+ if (socket->socket.irq_mask == 0)
+ socket->socket.irq_mask = 0x6f8;
+
dev_printk(KERN_INFO, &socket->dev->dev,
"ISA IRQ mask 0x%04x, PCI irq %d\n",
socket->socket.irq_mask, socket->cb_irq);
@@ -1257,6 +1264,15 @@ static int yenta_probe(struct pci_dev *d
dev_printk(KERN_INFO, &dev->dev,
"Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
+ /* Generate an interrupt on card insert/remove */
+ config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
+
+ /* Set up Multifunction Routing Status Register */
+ config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
+
+ /* Switch interrupts to parallelized */
+ config_writeb(socket, 0x92, 0x64);
+
yenta_fixup_parent_bridge(dev->subordinate);
/* Register it with the pcmcia layer.. */

11
target/linux/brcm47xx/patches-3.10/976-ssb_increase_pci_delay.patch
View File

@ -1,11 +0,0 @@
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -375,7 +375,7 @@ static void ssb_pcicore_init_hostmode(st
set_io_port_base(ssb_pcicore_controller.io_map_base);
/* Give some time to the PCI controller to configure itself with the new
* values. Not waiting at this point causes crashes of the machine. */
- mdelay(10);
+ mdelay(300);
register_pci_controller(&ssb_pcicore_controller);
}

13
target/linux/brcm47xx/patches-3.10/980-wnr834b_no_cardbus_invariant.patch
View File

@ -1,13 +0,0 @@
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -136,6 +136,10 @@ static int bcm47xx_get_invariants(struct
if (bcm47xx_nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
+ /* Do not indicate cardbus for Netgear WNR834B V1 and V2 */
+ if (iv->boardinfo.type == 0x0472 && iv->has_cardbus_slot)
+ iv->has_cardbus_slot = 0;
+
return 0;
}

22
target/linux/brcm47xx/patches-3.10/999-wl_exports.patch
View File

@ -1,22 +0,0 @@
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -21,7 +21,8 @@
#include <bcm47xx_nvram.h>
#include <asm/mach-bcm47xx/bcm47xx.h>
-static char nvram_buf[NVRAM_SPACE];
+char nvram_buf[NVRAM_SPACE];
+EXPORT_SYMBOL(nvram_buf);
static int cfe_env;
extern char *cfe_env_get(char *nv_buf, const char *name);
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -59,6 +59,7 @@ void (*_dma_cache_wback)(unsigned long s
void (*_dma_cache_inv)(unsigned long start, unsigned long size);
EXPORT_SYMBOL(_dma_cache_wback_inv);
+EXPORT_SYMBOL(_dma_cache_inv);
#endif /* CONFIG_DMA_NONCOHERENT */