mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-22 12:28:23 +00:00
kirkwood: copy config and patches to 5.15
This patch makes only a copy of 5.10 config and patches. Patches merged in upstream was omited. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
This commit is contained in:
Pawel Dembicki
Sungbo Eo
parent
daee22c7c0
commit
8e6ee6cbaf
292
target/linux/kirkwood/config-5.15
Normal file
292
target/linux/kirkwood/config-5.15
Normal file
@ -0,0 +1,292 @@
|
||||
CONFIG_ALIGNMENT_TRAP=y
|
||||
CONFIG_ARCH_32BIT_OFF_T=y
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
CONFIG_ARCH_KEEP_MEMBLOCK=y
|
||||
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
|
||||
CONFIG_ARCH_MULTIPLATFORM=y
|
||||
CONFIG_ARCH_MULTI_CPU_AUTO=y
|
||||
# CONFIG_ARCH_MULTI_V4 is not set
|
||||
# CONFIG_ARCH_MULTI_V4T is not set
|
||||
CONFIG_ARCH_MULTI_V4_V5=y
|
||||
CONFIG_ARCH_MULTI_V5=y
|
||||
CONFIG_ARCH_MVEBU=y
|
||||
CONFIG_ARCH_NR_GPIO=0
|
||||
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
|
||||
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
|
||||
CONFIG_ARCH_SPARSEMEM_ENABLE=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
CONFIG_ARM=y
|
||||
# CONFIG_ARMADA_37XX_WATCHDOG is not set
|
||||
# CONFIG_ARMADA_THERMAL is not set
|
||||
CONFIG_ARM_APPENDED_DTB=y
|
||||
CONFIG_ARM_ATAG_DTB_COMPAT=y
|
||||
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
|
||||
CONFIG_ARM_HAS_SG_CHAIN=y
|
||||
# CONFIG_ARM_KIRKWOOD_CPUIDLE is not set
|
||||
CONFIG_ARM_L1_CACHE_SHIFT=5
|
||||
# CONFIG_ARM_MVEBU_V7_CPUIDLE is not set
|
||||
CONFIG_ARM_PATCH_PHYS_VIRT=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_ARM_UNWIND=y
|
||||
CONFIG_ATA=y
|
||||
CONFIG_ATAGS=y
|
||||
CONFIG_ATA_LEDS=y
|
||||
CONFIG_AUTO_ZRELADDR=y
|
||||
CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_BLK_MQ_PCI=y
|
||||
CONFIG_BLK_SCSI_REQUEST=y
|
||||
CONFIG_CACHE_FEROCEON_L2=y
|
||||
# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
|
||||
CONFIG_CLKDEV_LOOKUP=y
|
||||
CONFIG_CLKSRC_MMIO=y
|
||||
CONFIG_CLONE_BACKWARDS=y
|
||||
CONFIG_COMMON_CLK=y
|
||||
CONFIG_COMPAT_32BIT_TIME=y
|
||||
CONFIG_CPU_32v5=y
|
||||
CONFIG_CPU_ABRT_EV5T=y
|
||||
CONFIG_CPU_CACHE_VIVT=y
|
||||
CONFIG_CPU_COPY_FEROCEON=y
|
||||
CONFIG_CPU_CP15=y
|
||||
CONFIG_CPU_CP15_MMU=y
|
||||
CONFIG_CPU_FEROCEON=y
|
||||
# CONFIG_CPU_FEROCEON_OLD_ID is not set
|
||||
CONFIG_CPU_IDLE=y
|
||||
CONFIG_CPU_IDLE_GOV_LADDER=y
|
||||
CONFIG_CPU_PABRT_LEGACY=y
|
||||
CONFIG_CPU_PM=y
|
||||
CONFIG_CPU_THERMAL=y
|
||||
CONFIG_CPU_THUMB_CAPABLE=y
|
||||
CONFIG_CPU_TLB_FEROCEON=y
|
||||
CONFIG_CPU_USE_DOMAINS=y
|
||||
CONFIG_CRC16=y
|
||||
# CONFIG_CRC32_SARWATE is not set
|
||||
CONFIG_CRC32_SLICEBY8=y
|
||||
CONFIG_CRYPTO_CRC32C=y
|
||||
CONFIG_CRYPTO_DEFLATE=y
|
||||
CONFIG_CRYPTO_DES=y
|
||||
CONFIG_CRYPTO_DEV_MARVELL=y
|
||||
CONFIG_CRYPTO_DEV_MARVELL_CESA=y
|
||||
CONFIG_CRYPTO_HASH_INFO=y
|
||||
CONFIG_CRYPTO_HW=y
|
||||
CONFIG_CRYPTO_LIB_DES=y
|
||||
CONFIG_CRYPTO_LZO=y
|
||||
CONFIG_CRYPTO_RNG2=y
|
||||
CONFIG_CRYPTO_ZSTD=y
|
||||
CONFIG_DEBUG_LL=y
|
||||
CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
|
||||
CONFIG_DEBUG_MVEBU_UART0_ALTERNATE=y
|
||||
# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
|
||||
CONFIG_DEBUG_UART_8250=y
|
||||
CONFIG_DEBUG_UART_8250_SHIFT=2
|
||||
CONFIG_DEBUG_UART_PHYS=0xf1012000
|
||||
CONFIG_DEBUG_UART_VIRT=0xfed12000
|
||||
CONFIG_DEBUG_UNCOMPRESS=y
|
||||
# CONFIG_DLCI is not set
|
||||
CONFIG_DMA_OPS=y
|
||||
CONFIG_DMA_REMAP=y
|
||||
CONFIG_DNOTIFY=y
|
||||
CONFIG_DTC=y
|
||||
# CONFIG_EARLY_PRINTK is not set
|
||||
CONFIG_EDAC_ATOMIC_SCRUB=y
|
||||
CONFIG_EDAC_SUPPORT=y
|
||||
CONFIG_FIXED_PHY=y
|
||||
CONFIG_FIX_EARLYCON_MEM=y
|
||||
CONFIG_FORCE_PCI=y
|
||||
CONFIG_FW_LOADER_PAGED_BUF=y
|
||||
CONFIG_GENERIC_ALLOCATOR=y
|
||||
CONFIG_GENERIC_ATOMIC64=y
|
||||
CONFIG_GENERIC_BUG=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CPU_AUTOPROBE=y
|
||||
CONFIG_GENERIC_EARLY_IOREMAP=y
|
||||
CONFIG_GENERIC_IDLE_POLL_SETUP=y
|
||||
CONFIG_GENERIC_IRQ_CHIP=y
|
||||
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
|
||||
CONFIG_GENERIC_IRQ_SHOW=y
|
||||
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
|
||||
CONFIG_GENERIC_PCI_IOMAP=y
|
||||
CONFIG_GENERIC_PHY=y
|
||||
CONFIG_GENERIC_PINCONF=y
|
||||
CONFIG_GENERIC_SCHED_CLOCK=y
|
||||
CONFIG_GENERIC_SMP_IDLE_THREAD=y
|
||||
CONFIG_GENERIC_STRNCPY_FROM_USER=y
|
||||
CONFIG_GENERIC_STRNLEN_USER=y
|
||||
CONFIG_GLOB=y
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIOLIB_IRQCHIP=y
|
||||
CONFIG_GPIO_MVEBU=y
|
||||
CONFIG_GRO_CELLS=y
|
||||
CONFIG_HANDLE_DOMAIN_IRQ=y
|
||||
CONFIG_HARDIRQS_SW_RESEND=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT_MAP=y
|
||||
CONFIG_HWMON=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_HW_RANDOM_OMAP=y
|
||||
CONFIG_HZ_FIXED=0
|
||||
CONFIG_HZ_PERIODIC=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_BOARDINFO=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_MV64XXX=y
|
||||
# CONFIG_I2C_PXA is not set
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_IRQCHIP=y
|
||||
CONFIG_IRQ_DOMAIN=y
|
||||
CONFIG_IRQ_FORCED_THREADING=y
|
||||
CONFIG_IRQ_WORK=y
|
||||
CONFIG_KIRKWOOD_CLK=y
|
||||
CONFIG_KIRKWOOD_THERMAL=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_NETXBIG=y
|
||||
CONFIG_LEDS_NS2=y
|
||||
CONFIG_LIBFDT=y
|
||||
CONFIG_LOCK_DEBUGGING_SUPPORT=y
|
||||
CONFIG_LZO_COMPRESS=y
|
||||
CONFIG_LZO_DECOMPRESS=y
|
||||
CONFIG_MACH_KIRKWOOD=y
|
||||
CONFIG_MACH_MVEBU_ANY=y
|
||||
CONFIG_MANGLE_BOOTARGS=y
|
||||
CONFIG_MARVELL_PHY=y
|
||||
CONFIG_MDIO_BUS=y
|
||||
CONFIG_MDIO_DEVICE=y
|
||||
CONFIG_MDIO_DEVRES=y
|
||||
CONFIG_MEMFD_CREATE=y
|
||||
CONFIG_MIGRATION=y
|
||||
CONFIG_MODULES_USE_ELF_REL=y
|
||||
# CONFIG_MTD_CFI is not set
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_NAND_CORE=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
|
||||
# CONFIG_MTD_NAND_MARVELL is not set
|
||||
CONFIG_MTD_NAND_ORION=y
|
||||
CONFIG_MTD_RAW_NAND=y
|
||||
CONFIG_MTD_SPI_NOR=y
|
||||
CONFIG_MTD_SPLIT_FIRMWARE=y
|
||||
CONFIG_MTD_SPLIT_UIMAGE_FW=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_BEB_LIMIT=20
|
||||
CONFIG_MTD_UBI_BLOCK=y
|
||||
CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
||||
CONFIG_MV643XX_ETH=y
|
||||
CONFIG_MVEBU_CLK_COMMON=y
|
||||
CONFIG_MVEBU_MBUS=y
|
||||
CONFIG_MVMDIO=y
|
||||
# CONFIG_MVNETA is not set
|
||||
# CONFIG_MVPP2 is not set
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NEED_KUSER_HELPERS=y
|
||||
CONFIG_NEED_PER_CPU_KM=y
|
||||
CONFIG_NET_DEVLINK=y
|
||||
CONFIG_NET_DSA=y
|
||||
CONFIG_NET_DSA_MV88E6XXX=y
|
||||
CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
|
||||
CONFIG_NET_DSA_TAG_DSA=y
|
||||
CONFIG_NET_DSA_TAG_EDSA=y
|
||||
CONFIG_NET_SWITCHDEV=y
|
||||
CONFIG_NLS=y
|
||||
CONFIG_NVMEM=y
|
||||
CONFIG_OF=y
|
||||
CONFIG_OF_ADDRESS=y
|
||||
CONFIG_OF_EARLY_FLATTREE=y
|
||||
CONFIG_OF_FLATTREE=y
|
||||
CONFIG_OF_GPIO=y
|
||||
CONFIG_OF_IRQ=y
|
||||
CONFIG_OF_KOBJ=y
|
||||
CONFIG_OF_MDIO=y
|
||||
CONFIG_OF_NET=y
|
||||
CONFIG_OLD_SIGACTION=y
|
||||
CONFIG_OLD_SIGSUSPEND3=y
|
||||
CONFIG_ORION_IRQCHIP=y
|
||||
CONFIG_ORION_TIMER=y
|
||||
CONFIG_ORION_WATCHDOG=y
|
||||
CONFIG_OUTER_CACHE=y
|
||||
CONFIG_PAGE_OFFSET=0xC0000000
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCI_BRIDGE_EMUL=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PCI_DOMAINS_GENERIC=y
|
||||
CONFIG_PCI_MVEBU=y
|
||||
CONFIG_PERF_USE_VMALLOC=y
|
||||
CONFIG_PGTABLE_LEVELS=2
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_PHYLINK=y
|
||||
# CONFIG_PHY_MVEBU_A3700_UTMI is not set
|
||||
# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
|
||||
CONFIG_PHY_MVEBU_SATA=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCTRL_KIRKWOOD=y
|
||||
CONFIG_PINCTRL_MVEBU=y
|
||||
# CONFIG_PINCTRL_SINGLE is not set
|
||||
CONFIG_PINCTRL_SX150X=y
|
||||
CONFIG_PLAT_ORION=y
|
||||
CONFIG_POWER_RESET=y
|
||||
CONFIG_POWER_RESET_GPIO=y
|
||||
CONFIG_POWER_RESET_LINKSTATION=y
|
||||
CONFIG_POWER_SUPPLY=y
|
||||
CONFIG_RATIONAL=y
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_REGMAP_MMIO=y
|
||||
CONFIG_REGULATOR=y
|
||||
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_MV=y
|
||||
CONFIG_RTC_I2C_AND_SPI=y
|
||||
CONFIG_RTC_MC146818_LIB=y
|
||||
CONFIG_SATA_HOST=y
|
||||
CONFIG_SATA_PMP=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
|
||||
CONFIG_SERIAL_8250_FSL=y
|
||||
CONFIG_SERIAL_MCTRL_GPIO=y
|
||||
# CONFIG_SERIAL_MVEBU_UART is not set
|
||||
CONFIG_SERIAL_OF_PLATFORM=y
|
||||
CONFIG_SGL_ALLOC=y
|
||||
CONFIG_SG_POOL=y
|
||||
CONFIG_SOC_BUS=y
|
||||
CONFIG_SPARSE_IRQ=y
|
||||
CONFIG_SPI=y
|
||||
# CONFIG_SPI_ARMADA_3700 is not set
|
||||
CONFIG_SPI_MASTER=y
|
||||
CONFIG_SPI_MEM=y
|
||||
CONFIG_SPI_ORION=y
|
||||
CONFIG_SPLIT_PTLOCK_CPUS=999999
|
||||
CONFIG_SRAM=y
|
||||
CONFIG_SRAM_EXEC=y
|
||||
CONFIG_SRCU=y
|
||||
CONFIG_SWPHY=y
|
||||
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
||||
CONFIG_THERMAL=y
|
||||
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
|
||||
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
|
||||
CONFIG_THERMAL_GOV_STEP_WISE=y
|
||||
CONFIG_THERMAL_HWMON=y
|
||||
CONFIG_THERMAL_OF=y
|
||||
CONFIG_TICK_CPU_ACCOUNTING=y
|
||||
CONFIG_TIMER_OF=y
|
||||
CONFIG_TIMER_PROBE=y
|
||||
CONFIG_TINY_SRCU=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
|
||||
CONFIG_UNWINDER_ARM=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_COMMON=y
|
||||
CONFIG_USB_LED_TRIG=y
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_USE_OF=y
|
||||
# CONFIG_VFP is not set
|
||||
CONFIG_VM_EVENT_COUNTERS=y
|
||||
CONFIG_WAN=y
|
||||
CONFIG_WATCHDOG_CORE=y
|
||||
CONFIG_XXHASH=y
|
||||
CONFIG_XZ_DEC_ARM=y
|
||||
CONFIG_XZ_DEC_BCJ=y
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZLIB_DEFLATE=y
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZSTD_COMPRESS=y
|
||||
CONFIG_ZSTD_DECOMPRESS=y
|
||||
53
target/linux/kirkwood/patches-5.15/100-ib62x0.patch
Normal file
53
target/linux/kirkwood/patches-5.15/100-ib62x0.patch
Normal file
@ -0,0 +1,53 @@
|
||||
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
|
||||
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
|
||||
@@ -6,7 +6,14 @@
|
||||
|
||||
/ {
|
||||
model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
|
||||
- compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
||||
+ compatible = "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
||||
+
|
||||
+ aliases {
|
||||
+ led-boot = &led_green_os;
|
||||
+ led-failsafe = &led_red_os;
|
||||
+ led-running = &led_green_os;
|
||||
+ led-upgrade = &led_red_os;
|
||||
+ };
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
@@ -81,12 +88,12 @@
|
||||
&pmx_led_usb_transfer>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
- green-os {
|
||||
+ led_green_os: green-os {
|
||||
label = "ib62x0:green:os";
|
||||
gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
|
||||
- default-state = "keep";
|
||||
+ default-state = "on";
|
||||
};
|
||||
- red-os {
|
||||
+ led_red_os: red-os {
|
||||
label = "ib62x0:red:os";
|
||||
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
@@ -118,13 +125,13 @@
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
- label = "uImage";
|
||||
- reg = <0x0100000 0x600000>;
|
||||
+ label = "second stage u-boot";
|
||||
+ reg = <0x100000 0x200000>;
|
||||
};
|
||||
|
||||
- partition@700000 {
|
||||
- label = "root";
|
||||
- reg = <0x0700000 0xf900000>;
|
||||
+ partition@200000 {
|
||||
+ label = "ubi";
|
||||
+ reg = <0x200000 0xfe00000>;
|
||||
};
|
||||
|
||||
};
|
||||
80
target/linux/kirkwood/patches-5.15/101-iconnect.patch
Normal file
80
target/linux/kirkwood/patches-5.15/101-iconnect.patch
Normal file
@ -0,0 +1,80 @@
|
||||
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
|
||||
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
|
||||
@@ -8,6 +8,13 @@
|
||||
model = "Iomega Iconnect";
|
||||
compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
||||
|
||||
+ aliases {
|
||||
+ led-boot = &led_power_blue;
|
||||
+ led-failsafe = &led_power_red;
|
||||
+ led-running = &led_power_blue;
|
||||
+ led-upgrade = &led_power_red;
|
||||
+ };
|
||||
+
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x10000000>;
|
||||
@@ -16,8 +23,6 @@
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
stdout-path = &uart0;
|
||||
- linux,initrd-start = <0x4500040>;
|
||||
- linux,initrd-end = <0x4800000>;
|
||||
};
|
||||
|
||||
ocp@f1000000 {
|
||||
@@ -89,12 +94,12 @@
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "on";
|
||||
};
|
||||
- power-blue {
|
||||
+ led_power_blue: power-blue {
|
||||
label = "power:blue";
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
|
||||
- default-state = "keep";
|
||||
+ default-state = "on";
|
||||
};
|
||||
- power-red {
|
||||
+ led_power_red: power-red {
|
||||
label = "power:red";
|
||||
gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
@@ -146,28 +151,23 @@
|
||||
status = "okay";
|
||||
|
||||
partition@0 {
|
||||
- label = "uboot";
|
||||
- reg = <0x0000000 0xc0000>;
|
||||
+ label = "u-boot";
|
||||
+ reg = <0x0000000 0xe0000>;
|
||||
};
|
||||
|
||||
- partition@a0000 {
|
||||
- label = "env";
|
||||
- reg = <0xa0000 0x20000>;
|
||||
+ partition@e0000 {
|
||||
+ label = "u-boot environment";
|
||||
+ reg = <0xe0000 0x100000>;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
- label = "zImage";
|
||||
- reg = <0x100000 0x300000>;
|
||||
- };
|
||||
-
|
||||
- partition@540000 {
|
||||
- label = "initrd";
|
||||
- reg = <0x540000 0x300000>;
|
||||
+ label = "second stage u-boot";
|
||||
+ reg = <0x100000 0x200000>;
|
||||
};
|
||||
|
||||
- partition@980000 {
|
||||
- label = "boot";
|
||||
- reg = <0x980000 0x1f400000>;
|
||||
+ partition@200000 {
|
||||
+ label = "ubi";
|
||||
+ reg = <0x200000 0x1fe00000>;
|
||||
};
|
||||
};
|
||||
|
||||
62
target/linux/kirkwood/patches-5.15/102-dockstar.patch
Normal file
62
target/linux/kirkwood/patches-5.15/102-dockstar.patch
Normal file
@ -0,0 +1,62 @@
|
||||
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
|
||||
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
|
||||
@@ -8,6 +8,13 @@
|
||||
model = "Seagate FreeAgent Dockstar";
|
||||
compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
||||
|
||||
+ aliases {
|
||||
+ led-boot = &led_health;
|
||||
+ led-failsafe = &led_fault;
|
||||
+ led-running = &led_health;
|
||||
+ led-upgrade = &led_fault;
|
||||
+ };
|
||||
+
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x8000000>;
|
||||
@@ -42,12 +49,12 @@
|
||||
pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
- health {
|
||||
+ led_health: health {
|
||||
label = "status:green:health";
|
||||
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
||||
- default-state = "keep";
|
||||
+ default-state = "on";
|
||||
};
|
||||
- fault {
|
||||
+ led_fault: fault {
|
||||
label = "status:orange:fault";
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
@@ -78,18 +85,22 @@
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
- reg = <0x0000000 0x100000>;
|
||||
- read-only;
|
||||
+ reg = <0x0000000 0xe0000>;
|
||||
+ };
|
||||
+
|
||||
+ partition@e0000 {
|
||||
+ label = "u-boot environment";
|
||||
+ reg = <0xe0000 0x100000>;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
- label = "uImage";
|
||||
- reg = <0x0100000 0x400000>;
|
||||
+ label = "second stage u-boot";
|
||||
+ reg = <0x100000 0x200000>;
|
||||
};
|
||||
|
||||
- partition@500000 {
|
||||
- label = "data";
|
||||
- reg = <0x0500000 0xfb00000>;
|
||||
+ partition@200000 {
|
||||
+ label = "ubi";
|
||||
+ reg = <0x200000 0xfe00000>;
|
||||
};
|
||||
};
|
||||
|
||||
67
target/linux/kirkwood/patches-5.15/103-iomega-ix2-200.patch
Normal file
67
target/linux/kirkwood/patches-5.15/103-iomega-ix2-200.patch
Normal file
@ -0,0 +1,67 @@
|
||||
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
|
||||
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
|
||||
@@ -8,6 +8,13 @@
|
||||
model = "Iomega StorCenter ix2-200";
|
||||
compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
||||
|
||||
+ aliases {
|
||||
+ led-boot = &led_power;
|
||||
+ led-failsafe = &led_health;
|
||||
+ led-running = &led_power;
|
||||
+ led-upgrade = &led_health;
|
||||
+ };
|
||||
+
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x10000000>;
|
||||
@@ -127,16 +134,16 @@
|
||||
&pmx_led_rebuild &pmx_led_health >;
|
||||
pinctrl-names = "default";
|
||||
|
||||
- power_led {
|
||||
+ led_power: power_led {
|
||||
label = "status:white:power_led";
|
||||
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
|
||||
- default-state = "keep";
|
||||
+ default-state = "on";
|
||||
};
|
||||
rebuild_led {
|
||||
label = "status:white:rebuild_led";
|
||||
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
- health_led {
|
||||
+ led_health: health_led {
|
||||
label = "status:red:health_led";
|
||||
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
@@ -186,18 +193,18 @@
|
||||
};
|
||||
|
||||
partition@a0000 {
|
||||
- label = "env";
|
||||
+ label = "u-boot environment";
|
||||
reg = <0xa0000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
- label = "uImage";
|
||||
+ label = "kernel";
|
||||
reg = <0x100000 0x300000>;
|
||||
};
|
||||
|
||||
partition@400000 {
|
||||
- label = "rootfs";
|
||||
+ label = "ubi";
|
||||
reg = <0x400000 0x1C00000>;
|
||||
};
|
||||
};
|
||||
@@ -211,7 +218,7 @@
|
||||
};
|
||||
|
||||
ð0 {
|
||||
- status = "okay";
|
||||
+ status = "disabled";
|
||||
ethernet0-port@0 {
|
||||
speed = <1000>;
|
||||
duplex = <1>;
|
||||
@ -0,0 +1,59 @@
|
||||
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
|
||||
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
|
||||
@@ -24,6 +24,10 @@
|
||||
};
|
||||
|
||||
aliases {
|
||||
+ led-boot = &led_white_health;
|
||||
+ led-failsafe = &led_white_health;
|
||||
+ led-running = &led_white_health;
|
||||
+ led-upgrade = &led_white_health;
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
@@ -56,9 +60,10 @@
|
||||
pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
|
||||
pinctrl-names = "default";
|
||||
|
||||
- white-health {
|
||||
+ led_white_health: white-health {
|
||||
label = "viper:white:health";
|
||||
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
|
||||
+ default-state = "on";
|
||||
};
|
||||
|
||||
white-pulse {
|
||||
@@ -114,23 +119,23 @@
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
- label = "kernel";
|
||||
- reg = <0x200000 0x2A0000>;
|
||||
+ label = "kernel1";
|
||||
+ reg = <0x200000 0x1A00000>;
|
||||
};
|
||||
|
||||
- partition@4a0000 {
|
||||
- label = "rootfs";
|
||||
- reg = <0x4A0000 0x1760000>;
|
||||
+ partition@500000 {
|
||||
+ label = "rootfs1";
|
||||
+ reg = <0x500000 0x1700000>;
|
||||
};
|
||||
|
||||
partition@1c00000 {
|
||||
- label = "alt_kernel";
|
||||
- reg = <0x1C00000 0x2A0000>;
|
||||
+ label = "kernel2";
|
||||
+ reg = <0x1C00000 0x1A00000>;
|
||||
};
|
||||
|
||||
- partition@1ea0000 {
|
||||
- label = "alt_rootfs";
|
||||
- reg = <0x1EA0000 0x1760000>;
|
||||
+ partition@1f00000 {
|
||||
+ label = "rootfs2";
|
||||
+ reg = <0x1F00000 0x1700000>;
|
||||
};
|
||||
|
||||
partition@3600000 {
|
||||
53
target/linux/kirkwood/patches-5.15/106-goflexnet.patch
Normal file
53
target/linux/kirkwood/patches-5.15/106-goflexnet.patch
Normal file
@ -0,0 +1,53 @@
|
||||
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
|
||||
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
|
||||
@@ -8,6 +8,13 @@
|
||||
model = "Seagate GoFlex Net";
|
||||
compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
||||
|
||||
+ aliases {
|
||||
+ led-boot = &led_health;
|
||||
+ led-failsafe = &led_fault;
|
||||
+ led-running = &led_health;
|
||||
+ led-upgrade = &led_fault;
|
||||
+ };
|
||||
+
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x8000000>;
|
||||
@@ -85,12 +92,12 @@
|
||||
>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
- health {
|
||||
+ led_health: health {
|
||||
label = "status:green:health";
|
||||
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
||||
- default-state = "keep";
|
||||
+ default-state = "on";
|
||||
};
|
||||
- fault {
|
||||
+ led_fault: fault {
|
||||
label = "status:orange:fault";
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
@@ -159,18 +166,8 @@
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
- label = "uImage";
|
||||
- reg = <0x0100000 0x400000>;
|
||||
- };
|
||||
-
|
||||
- partition@500000 {
|
||||
- label = "pogoplug";
|
||||
- reg = <0x0500000 0x2000000>;
|
||||
- };
|
||||
-
|
||||
- partition@2500000 {
|
||||
- label = "root";
|
||||
- reg = <0x02500000 0xd800000>;
|
||||
+ label = "ubi";
|
||||
+ reg = <0x0100000 0x0ff00000>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -0,0 +1,48 @@
|
||||
--- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
|
||||
+++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
|
||||
@@ -112,40 +112,16 @@
|
||||
|
||||
partition@0 {
|
||||
label = "uboot";
|
||||
- reg = <0x0000000 0x0100000>;
|
||||
+ reg = <0x0000000 0x00c0000>;
|
||||
read-only;
|
||||
};
|
||||
partition@100000 {
|
||||
label = "uboot_env";
|
||||
- reg = <0x0100000 0x0080000>;
|
||||
+ reg = <0x00c0000 0x0080000>;
|
||||
};
|
||||
- partition@180000 {
|
||||
- label = "key_store";
|
||||
- reg = <0x0180000 0x0080000>;
|
||||
- };
|
||||
- partition@200000 {
|
||||
- label = "info";
|
||||
- reg = <0x0200000 0x0080000>;
|
||||
- };
|
||||
- partition@280000 {
|
||||
- label = "etc";
|
||||
- reg = <0x0280000 0x0a00000>;
|
||||
- };
|
||||
- partition@c80000 {
|
||||
- label = "kernel_1";
|
||||
- reg = <0x0c80000 0x0a00000>;
|
||||
- };
|
||||
- partition@1680000 {
|
||||
- label = "rootfs1";
|
||||
- reg = <0x1680000 0x2fc0000>;
|
||||
- };
|
||||
- partition@4640000 {
|
||||
- label = "kernel_2";
|
||||
- reg = <0x4640000 0x0a00000>;
|
||||
- };
|
||||
- partition@5040000 {
|
||||
- label = "rootfs2";
|
||||
- reg = <0x5040000 0x2fc0000>;
|
||||
+ partition@140000 {
|
||||
+ label = "ubi";
|
||||
+ reg = <0x0140000 0x7ec0000>;
|
||||
};
|
||||
};
|
||||
|
||||
54
target/linux/kirkwood/patches-5.15/107-03-nsa325.patch
Normal file
54
target/linux/kirkwood/patches-5.15/107-03-nsa325.patch
Normal file
@ -0,0 +1,54 @@
|
||||
--- a/arch/arm/boot/dts/kirkwood-nsa325.dts
|
||||
+++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
|
||||
@@ -15,6 +15,13 @@
|
||||
model = "ZyXEL NSA325";
|
||||
compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
|
||||
|
||||
+ aliases {
|
||||
+ led-boot = &led_green_sys;
|
||||
+ led-failsafe = &led_orange_sys;
|
||||
+ led-running = &led_green_sys;
|
||||
+ led-upgrade = &led_orange_sys;
|
||||
+ };
|
||||
+
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x20000000>;
|
||||
@@ -162,17 +169,19 @@
|
||||
&pmx_led_hdd1_green &pmx_led_hdd1_red>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
- green-sys {
|
||||
+ led_green_sys: green-sys {
|
||||
label = "nsa325:green:sys";
|
||||
gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
|
||||
+ default-state = "on";
|
||||
};
|
||||
- orange-sys {
|
||||
+ led_orange_sys: orange-sys {
|
||||
label = "nsa325:orange:sys";
|
||||
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
green-hdd1 {
|
||||
label = "nsa325:green:hdd1";
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
||||
+ linux,default-trigger = "ata1";
|
||||
};
|
||||
red-hdd1 {
|
||||
label = "nsa325:red:hdd1";
|
||||
@@ -181,6 +190,7 @@
|
||||
green-hdd2 {
|
||||
label = "nsa325:green:hdd2";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
+ linux,default-trigger = "ata2";
|
||||
};
|
||||
red-hdd2 {
|
||||
label = "nsa325:red:hdd2";
|
||||
@@ -189,6 +199,7 @@
|
||||
green-usb {
|
||||
label = "nsa325:green:usb";
|
||||
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
||||
+ linux,default-trigger = "usb-host";
|
||||
};
|
||||
green-copy {
|
||||
label = "nsa325:green:copy";
|
||||
87
target/linux/kirkwood/patches-5.15/109-pogoplug_v4.patch
Normal file
87
target/linux/kirkwood/patches-5.15/109-pogoplug_v4.patch
Normal file
@ -0,0 +1,87 @@
|
||||
--- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
|
||||
+++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
|
||||
@@ -18,12 +18,20 @@
|
||||
compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
|
||||
"marvell,kirkwood";
|
||||
|
||||
+ aliases {
|
||||
+ led-boot = &led_health;
|
||||
+ led-failsafe = &led_fault;
|
||||
+ led-running = &led_health;
|
||||
+ led-upgrade = &led_fault;
|
||||
+ };
|
||||
+
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x08000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
+ bootargs = "console=ttyS0,115200";
|
||||
stdout-path = "uart0:115200n8";
|
||||
};
|
||||
|
||||
@@ -37,8 +45,8 @@
|
||||
eject {
|
||||
debounce-interval = <50>;
|
||||
wakeup-source;
|
||||
- linux,code = <KEY_EJECTCD>;
|
||||
- label = "Eject Button";
|
||||
+ linux,code = <KEY_RESTART>;
|
||||
+ label = "Reset";
|
||||
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
@@ -48,12 +56,12 @@
|
||||
pinctrl-0 = <&pmx_led_green &pmx_led_red>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
- health {
|
||||
+ led_health: health {
|
||||
label = "pogoplugv4:green:health";
|
||||
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
- fault {
|
||||
+ led_fault: fault {
|
||||
label = "pogoplugv4:red:fault";
|
||||
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
@@ -137,29 +145,19 @@
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
- label = "u-boot";
|
||||
- reg = <0x00000000 0x200000>;
|
||||
+ label = "uboot";
|
||||
+ reg = <0x00000000 0x1c0000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
- partition@200000 {
|
||||
- label = "uImage";
|
||||
- reg = <0x00200000 0x300000>;
|
||||
- };
|
||||
-
|
||||
- partition@500000 {
|
||||
- label = "uImage2";
|
||||
- reg = <0x00500000 0x300000>;
|
||||
- };
|
||||
-
|
||||
- partition@800000 {
|
||||
- label = "failsafe";
|
||||
- reg = <0x00800000 0x800000>;
|
||||
+ partition@1c0000 {
|
||||
+ label = "uboot_env";
|
||||
+ reg = <0x001c0000 0x40000>;
|
||||
};
|
||||
|
||||
- partition@1000000 {
|
||||
- label = "root";
|
||||
- reg = <0x01000000 0x7000000>;
|
||||
+ partition@200000 {
|
||||
+ label = "ubi";
|
||||
+ reg = <0x00200000 0x7e00000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
68
target/linux/kirkwood/patches-5.15/110-pogo_e02.patch
Normal file
68
target/linux/kirkwood/patches-5.15/110-pogo_e02.patch
Normal file
@ -0,0 +1,68 @@
|
||||
--- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts
|
||||
+++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
|
||||
@@ -20,6 +20,13 @@
|
||||
compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
|
||||
"marvell,kirkwood";
|
||||
|
||||
+ aliases {
|
||||
+ led-boot = &led_health;
|
||||
+ led-failsafe = &led_fault;
|
||||
+ led-running = &led_health;
|
||||
+ led-upgrade = &led_fault;
|
||||
+ };
|
||||
+
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x10000000>;
|
||||
@@ -33,12 +40,12 @@
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
- health {
|
||||
+ led_health: health {
|
||||
label = "pogo_e02:green:health";
|
||||
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
|
||||
- default-state = "keep";
|
||||
+ default-state = "on";
|
||||
};
|
||||
- fault {
|
||||
+ led_fault: fault {
|
||||
label = "pogo_e02:orange:fault";
|
||||
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
@@ -95,24 +102,24 @@
|
||||
status = "okay";
|
||||
|
||||
partition@0 {
|
||||
- label = "u-boot";
|
||||
- reg = <0x0000000 0x100000>;
|
||||
+ label = "uboot";
|
||||
+ reg = <0x0 0xe0000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
- partition@100000 {
|
||||
- label = "uImage";
|
||||
- reg = <0x0100000 0x400000>;
|
||||
+ partition@e0000 {
|
||||
+ label = "uboot_env";
|
||||
+ reg = <0xe0000 0x20000>;
|
||||
};
|
||||
|
||||
- partition@500000 {
|
||||
- label = "pogoplug";
|
||||
- reg = <0x0500000 0x2000000>;
|
||||
+ partition@100000 {
|
||||
+ label = "second_stage_uboot";
|
||||
+ reg = <0x100000 0x100000>;
|
||||
};
|
||||
|
||||
- partition@2500000 {
|
||||
- label = "root";
|
||||
- reg = <0x02500000 0x5b00000>;
|
||||
+ partition@200000 {
|
||||
+ label = "ubi";
|
||||
+ reg = <0x200000 0x7e00000>;
|
||||
};
|
||||
};
|
||||
|
||||
47
target/linux/kirkwood/patches-5.15/111-l-50.patch
Normal file
47
target/linux/kirkwood/patches-5.15/111-l-50.patch
Normal file
@ -0,0 +1,47 @@
|
||||
--- a/arch/arm/boot/dts/kirkwood-l-50.dts
|
||||
+++ b/arch/arm/boot/dts/kirkwood-l-50.dts
|
||||
@@ -18,6 +18,13 @@
|
||||
reg = <0x00000000 0x20000000>;
|
||||
};
|
||||
|
||||
+ aliases {
|
||||
+ led-boot = &led_status_green;
|
||||
+ led-failsafe = &led_status_red;
|
||||
+ led-running = &led_status_green;
|
||||
+ led-upgrade = &led_status_red;
|
||||
+ };
|
||||
+
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8";
|
||||
stdout-path = &uart0;
|
||||
@@ -95,12 +102,12 @@
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
- status_green {
|
||||
+ led_status_green: status_green {
|
||||
label = "l-50:green:status";
|
||||
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
- status_red {
|
||||
+ led_status_red: status_red {
|
||||
label = "l-50:red:status";
|
||||
gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
@@ -349,13 +356,8 @@
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
- label = "kernel-1";
|
||||
- reg = <0x00100000 0x00800000>;
|
||||
- };
|
||||
-
|
||||
- partition@900000 {
|
||||
- label = "rootfs-1";
|
||||
- reg = <0x00900000 0x07100000>;
|
||||
+ label = "ubi";
|
||||
+ reg = <0x00100000 0x07900000>;
|
||||
};
|
||||
|
||||
partition@7a00000 {
|
||||
47
target/linux/kirkwood/patches-5.15/112-sheevaplug.patch
Normal file
47
target/linux/kirkwood/patches-5.15/112-sheevaplug.patch
Normal file
@ -0,0 +1,47 @@
|
||||
--- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
|
||||
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
|
||||
@@ -78,13 +78,8 @@
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
- label = "uImage";
|
||||
- reg = <0x0100000 0x400000>;
|
||||
- };
|
||||
-
|
||||
- partition@500000 {
|
||||
- label = "root";
|
||||
- reg = <0x0500000 0x1fb00000>;
|
||||
+ label = "ubi";
|
||||
+ reg = <0x0100000 0x1ff00000>;
|
||||
};
|
||||
};
|
||||
|
||||
--- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts
|
||||
+++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts
|
||||
@@ -13,6 +13,13 @@
|
||||
model = "Globalscale Technologies SheevaPlug";
|
||||
compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
||||
|
||||
+ aliases {
|
||||
+ led-boot = &led_health;
|
||||
+ led-failsafe = &led_health;
|
||||
+ led-running = &led_health;
|
||||
+ led-upgrade = &led_health;
|
||||
+ };
|
||||
+
|
||||
ocp@f1000000 {
|
||||
mvsdio@90000 {
|
||||
pinctrl-0 = <&pmx_sdio>;
|
||||
@@ -28,10 +35,10 @@
|
||||
pinctrl-0 = <&pmx_led_blue &pmx_led_red>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
- health {
|
||||
+ led_health: health {
|
||||
label = "sheevaplug:blue:health";
|
||||
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
|
||||
- default-state = "keep";
|
||||
+ default-state = "on";
|
||||
};
|
||||
|
||||
misc {
|
||||
76
target/linux/kirkwood/patches-5.15/113-readynas_duo_v2.patch
Normal file
76
target/linux/kirkwood/patches-5.15/113-readynas_duo_v2.patch
Normal file
@ -0,0 +1,76 @@
|
||||
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
|
||||
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
|
||||
@@ -19,6 +19,13 @@
|
||||
reg = <0x00000000 0x10000000>;
|
||||
};
|
||||
|
||||
+ aliases {
|
||||
+ led-boot = &led_power;
|
||||
+ led-failsafe = &led_power;
|
||||
+ led-running = &led_power;
|
||||
+ led-upgrade = &led_power;
|
||||
+ };
|
||||
+
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
stdout-path = &uart0;
|
||||
@@ -115,7 +122,7 @@
|
||||
&pmx_led_blue_backup >;
|
||||
pinctrl-names = "default";
|
||||
|
||||
- power_led {
|
||||
+ led_power: power_led {
|
||||
label = "status:blue:power_led";
|
||||
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
|
||||
default-state = "keep";
|
||||
@@ -129,11 +136,13 @@
|
||||
disk1_led {
|
||||
label = "status:blue:disk1_led";
|
||||
gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "ata1";
|
||||
};
|
||||
|
||||
disk2_led {
|
||||
label = "status:blue:disk2_led";
|
||||
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "ata2";
|
||||
};
|
||||
|
||||
backup_led {
|
||||
@@ -150,7 +159,13 @@
|
||||
|
||||
power-button {
|
||||
label = "Power Button";
|
||||
- linux,code = <KEY_POWER>;
|
||||
+ /* Power button and INT pin from PHY are both connected
|
||||
+ * to this GPIO. Every network restart causes PHY restart
|
||||
+ * and button is pressed. It's difficult to use it as
|
||||
+ * KEY_POWER without changes in kernel (or netifd) so
|
||||
+ * the button is configured as regular one.
|
||||
+ */
|
||||
+ linux,code = <BTN_1>;
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
@@ -208,18 +223,13 @@
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
- label = "uImage";
|
||||
+ label = "kernel";
|
||||
reg = <0x0200000 0x600000>;
|
||||
};
|
||||
|
||||
partition@800000 {
|
||||
- label = "minirootfs";
|
||||
- reg = <0x0800000 0x1000000>;
|
||||
- };
|
||||
-
|
||||
- partition@1800000 {
|
||||
- label = "jffs2";
|
||||
- reg = <0x1800000 0x6800000>;
|
||||
+ label = "ubi";
|
||||
+ reg = <0x0800000 0x7800000>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -0,0 +1,10 @@
|
||||
--- a/arch/arm/mach-mvebu/Kconfig
|
||||
+++ b/arch/arm/mach-mvebu/Kconfig
|
||||
@@ -116,6 +116,7 @@ config MACH_DOVE
|
||||
config MACH_KIRKWOOD
|
||||
bool "Marvell Kirkwood boards"
|
||||
depends on ARCH_MULTI_V5
|
||||
+ select ARCH_WANT_LIBATA_LEDS
|
||||
select CPU_FEROCEON
|
||||
select GPIOLIB
|
||||
select KIRKWOOD_CLK
|
||||
@ -0,0 +1,62 @@
|
||||
The WRT1900AC among other Linksys routers uses a dual-firmware layout.
|
||||
Dynamically rename the active partition to "ubi".
|
||||
|
||||
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
|
||||
---
|
||||
--- a/drivers/mtd/parsers/ofpart_core.c
|
||||
+++ b/drivers/mtd/parsers/ofpart_core.c
|
||||
@@ -38,6 +38,8 @@ static bool node_has_compatible(struct d
|
||||
return of_get_property(pp, "compatible", NULL);
|
||||
}
|
||||
|
||||
+static int mangled_rootblock;
|
||||
+
|
||||
static int parse_fixed_partitions(struct mtd_info *master,
|
||||
const struct mtd_partition **pparts,
|
||||
struct mtd_part_parser_data *data)
|
||||
@@ -47,6 +49,7 @@ static int parse_fixed_partitions(struct
|
||||
struct mtd_partition *parts;
|
||||
struct device_node *mtd_node;
|
||||
struct device_node *ofpart_node;
|
||||
+ const char *owrtpart = "ubi";
|
||||
const char *partname;
|
||||
struct device_node *pp;
|
||||
int nr_parts, i, ret = 0;
|
||||
@@ -133,9 +136,15 @@ static int parse_fixed_partitions(struct
|
||||
parts[i].size = of_read_number(reg + a_cells, s_cells);
|
||||
parts[i].of_node = pp;
|
||||
|
||||
- partname = of_get_property(pp, "label", &len);
|
||||
- if (!partname)
|
||||
- partname = of_get_property(pp, "name", &len);
|
||||
+ if (mangled_rootblock && (i == mangled_rootblock)) {
|
||||
+ partname = owrtpart;
|
||||
+ } else {
|
||||
+ partname = of_get_property(pp, "label", &len);
|
||||
+
|
||||
+ if (!partname)
|
||||
+ partname = of_get_property(pp, "name", &len);
|
||||
+ }
|
||||
+
|
||||
parts[i].name = partname;
|
||||
|
||||
if (of_get_property(pp, "read-only", &len))
|
||||
@@ -252,6 +261,18 @@ static int __init ofpart_parser_init(voi
|
||||
return 0;
|
||||
}
|
||||
|
||||
+static int __init active_root(char *str)
|
||||
+{
|
||||
+ get_option(&str, &mangled_rootblock);
|
||||
+
|
||||
+ if (!mangled_rootblock)
|
||||
+ return 1;
|
||||
+
|
||||
+ return 1;
|
||||
+}
|
||||
+
|
||||
+__setup("mangled_rootblock=", active_root);
|
||||
+
|
||||
static void __exit ofpart_parser_exit(void)
|
||||
{
|
||||
deregister_mtd_parser(&ofpart_parser);
|
||||
@ -0,0 +1,99 @@
|
||||
--- a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
|
||||
+++ b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
|
||||
@@ -17,6 +17,13 @@
|
||||
compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192",
|
||||
"marvell,kirkwood";
|
||||
|
||||
+ aliases {
|
||||
+ led-boot = &led_status_amber;
|
||||
+ led-failsafe = &led_status_amber;
|
||||
+ led-running = &led_status_blue;
|
||||
+ led-upgrade = &led_status_amber;
|
||||
+ };
|
||||
+
|
||||
memory { /* 128 MB */
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x8000000>;
|
||||
@@ -36,14 +43,14 @@
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
- label = "Reset";
|
||||
- linux,code = <KEY_POWER>;
|
||||
+ label = "Reset Button";
|
||||
+ linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
- button {
|
||||
- label = "Power";
|
||||
- linux,code = <KEY_SLEEP>;
|
||||
+ power {
|
||||
+ label = "Power Button";
|
||||
+ linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
@@ -51,11 +58,27 @@
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
- blue-power {
|
||||
+ led_power_blue: power_blue {
|
||||
label = "nas220:blue:power";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
+
|
||||
+ disk_blue {
|
||||
+ label = "nas220:blue:disk";
|
||||
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
|
||||
+ linux,default-trigger = "disk-activity";
|
||||
+ };
|
||||
+
|
||||
+ led_status_blue: status_blue {
|
||||
+ label = "nas220:blue:status";
|
||||
+ gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ led_status_amber: status_amber {
|
||||
+ label = "nas220:amber:status";
|
||||
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
};
|
||||
|
||||
regulators {
|
||||
@@ -153,6 +176,33 @@
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
+
|
||||
+ partitions {
|
||||
+ compatible = "fixed-partitions";
|
||||
+
|
||||
+ partition@0 {
|
||||
+ label = "uboot";
|
||||
+ reg = <0x0 0xa0000>;
|
||||
+ read-only;
|
||||
+ };
|
||||
+
|
||||
+ partition@a0000 {
|
||||
+ label = "uboot-env";
|
||||
+ reg = <0xa0000 0x10000>;
|
||||
+ read-only;
|
||||
+ };
|
||||
+
|
||||
+ partition@b0000 {
|
||||
+ label = "reserved";
|
||||
+ reg = <0xb0000 0x10000>;
|
||||
+ read-only;
|
||||
+ };
|
||||
+
|
||||
+ partition@c0000 {
|
||||
+ label = "ubi";
|
||||
+ reg = <0xc0000 0x1e80000>;
|
||||
+ };
|
||||
+ };
|
||||
};
|
||||
|
||||
&mdio {
|
||||
Loading…
Reference in New Issue
Block a user