mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 06:33:41 +00:00
ar71xx: Add support to Powerline ac TP-Link WPA8630
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
This commit is contained in:
Henryk Heisig
John Crispin
parent
15a14cf166
commit
8cc0c34ef5
@ -638,6 +638,11 @@ wnr612-v2)
|
||||
ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f"
|
||||
ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f"
|
||||
;;
|
||||
wpa8630)
|
||||
ucidef_set_led_netdev "wlan5" "WLAN5" "$board:green:wlan5" "wlan0"
|
||||
ucidef_set_led_netdev "wlan" "WLAN" "$board:green:wlan" "wlan1"
|
||||
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
|
||||
;;
|
||||
wpn824n)
|
||||
ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0"
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt"
|
||||
|
||||
@ -398,6 +398,10 @@ ar71xx_setup_interfaces()
|
||||
ucidef_add_switch_port_attr "switch0" 2 led 9
|
||||
ucidef_add_switch_port_attr "switch0" 5 led 2
|
||||
;;
|
||||
wpa8630)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4"
|
||||
;;
|
||||
wpj344)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0@eth0" "3:lan" "2:wan"
|
||||
|
||||
@ -43,7 +43,8 @@ get_status_led() {
|
||||
ap83|\
|
||||
mr12|\
|
||||
mr16|\
|
||||
nbg6616)
|
||||
nbg6616|\
|
||||
wpa8630)
|
||||
status_led="$board:green:power"
|
||||
;;
|
||||
ap96)
|
||||
|
||||
@ -90,6 +90,10 @@ case "$FIRMWARE" in
|
||||
unifiac-pro)
|
||||
ath10kcal_extract "EEPROM" 20480 2116
|
||||
;;
|
||||
wpa8630)
|
||||
ath10kcal_extract "ART" 20480 2116
|
||||
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
"ath10k/cal-pci-0000:01:00.0.bin")
|
||||
|
||||
@ -1129,6 +1129,9 @@ ar71xx_board_detect() {
|
||||
*"WNR1000 V2")
|
||||
name="wnr1000-v2"
|
||||
;;
|
||||
*WPA8630)
|
||||
name="wpa8630"
|
||||
;;
|
||||
*WPN824N)
|
||||
name="wpn824n"
|
||||
;;
|
||||
|
||||
@ -386,7 +386,8 @@ platform_check_image() {
|
||||
tl-wr842n-v3|\
|
||||
tl-wr941nd-v5|\
|
||||
tl-wr941nd-v6|\
|
||||
tl-wr941nd)
|
||||
tl-wr941nd|\
|
||||
wpa8630)
|
||||
local magic_ver="0100"
|
||||
|
||||
case "$board" in
|
||||
|
||||
@ -194,6 +194,7 @@ CONFIG_ATH79_MACH_WNR2000_V3=y
|
||||
CONFIG_ATH79_MACH_WNR2000_V4=y
|
||||
CONFIG_ATH79_MACH_WNR2200=y
|
||||
CONFIG_ATH79_MACH_WP543=y
|
||||
CONFIG_ATH79_MACH_WPA8630=y
|
||||
CONFIG_ATH79_MACH_WPE72=y
|
||||
CONFIG_ATH79_MACH_WPJ342=y
|
||||
CONFIG_ATH79_MACH_WPJ344=y
|
||||
|
||||
@ -1707,3 +1707,14 @@ config ATH79_MACH_DAP_2695_A1
|
||||
select ATH79_DEV_LEDS_GPIO
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
config ATH79_MACH_WPA8630
|
||||
bool "TP-Link WPA8630 support"
|
||||
select SOC_QCA956X
|
||||
select ATH79_DEV_AP9X_PCI if PCI
|
||||
select ATH79_DEV_ETH
|
||||
select ATH79_DEV_GPIO_BUTTONS
|
||||
select ATH79_DEV_LEDS_GPIO
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
|
||||
@ -200,6 +200,7 @@ obj-$(CONFIG_ATH79_MACH_WNR2000_V3) += mach-wnr2000-v3.o
|
||||
obj-$(CONFIG_ATH79_MACH_WNR2000_V4) += mach-wnr2000-v4.o
|
||||
obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o
|
||||
obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
|
||||
obj-$(CONFIG_ATH79_MACH_WPA8630) += mach-wpa8630.o
|
||||
obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
|
||||
obj-$(CONFIG_ATH79_MACH_WPJ342) += mach-wpj342.o
|
||||
obj-$(CONFIG_ATH79_MACH_WPJ344) += mach-wpj344.o
|
||||
|
||||
164
target/linux/ar71xx/files/arch/mips/ath79/mach-wpa8630.c
Normal file
164
target/linux/ar71xx/files/arch/mips/ath79/mach-wpa8630.c
Normal file
@ -0,0 +1,164 @@
|
||||
/*
|
||||
* TP-Link WPA8630 board support
|
||||
*
|
||||
* Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*/
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/ath9k_platform.h>
|
||||
#include <linux/ar8216_platform.h>
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "machtypes.h"
|
||||
#include "pci.h"
|
||||
#include "dev-ap9x-pci.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-spi.h"
|
||||
#include "dev-wmac.h"
|
||||
|
||||
#define WPA8630_KEYS_POLL_INTERVAL 20
|
||||
#define WPA8630_KEYS_DEBOUNCE_INTERVAL (3 * WPA8630_KEYS_POLL_INTERVAL)
|
||||
|
||||
#define WPA8630_GPIO_LED_POWER 1
|
||||
#define WPA8630_GPIO_LED_LAN 5
|
||||
#define WPA8630_GPIO_LED_WLAN 19
|
||||
#define WPA8630_GPIO_LED_WLAN5 21
|
||||
|
||||
#define WPA8630_GPIO_BTN_RESET 2
|
||||
#define WPA8630_GPIO_BTN_RFKILL 8
|
||||
#define WPA8630_GPIO_BTN_0 6
|
||||
#define WPA8630_GPIO_BTN_1 7
|
||||
|
||||
#define WPA8630_MAC0_OFFSET 0x0000
|
||||
#define WPA8630_WMAC_CALDATA_OFFSET 0x1000
|
||||
#define WPA8630_PCI_CALDATA_OFFSET 0x5000
|
||||
|
||||
static struct flash_platform_data wpa8630_flash_data = {
|
||||
.type = "s25fl064k",
|
||||
};
|
||||
|
||||
static struct gpio_led wpa8630_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "wpa8630:green:power",
|
||||
.gpio = WPA8630_GPIO_LED_POWER,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "wpa8630:green:lan",
|
||||
.gpio = WPA8630_GPIO_LED_LAN,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "wpa8630:green:wlan",
|
||||
.gpio = WPA8630_GPIO_LED_WLAN,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "wpa8630:green:wlan5",
|
||||
.gpio = WPA8630_GPIO_LED_WLAN5,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_button wpa8630_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "Reset button",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = WPA8630_GPIO_BTN_RESET,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.desc = "RFKILL button",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RFKILL,
|
||||
.debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = WPA8630_GPIO_BTN_RFKILL,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.desc = "LED",
|
||||
.type = EV_KEY,
|
||||
.debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = WPA8630_GPIO_BTN_0,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.desc = "Pair",
|
||||
.type = EV_KEY,
|
||||
.debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = WPA8630_GPIO_BTN_1,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
/* GMAC0 of the QCA8337 switch is connected to the QCA9563 SoC via SGMII */
|
||||
static struct ar8327_pad_cfg wpa8630_qca8337_pad0_cfg = {
|
||||
.mode = AR8327_PAD_MAC_SGMII,
|
||||
.sgmii_delay_en = true,
|
||||
};
|
||||
|
||||
static struct ar8327_platform_data wpa8630_qca8337_data = {
|
||||
.pad0_cfg = &wpa8630_qca8337_pad0_cfg,
|
||||
.port0_cfg = {
|
||||
.force_link = 1,
|
||||
.speed = AR8327_PORT_SPEED_1000,
|
||||
.duplex = 1,
|
||||
.txpause = 1,
|
||||
.rxpause = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct mdio_board_info wpa8630_mdio0_info[] = {
|
||||
{
|
||||
.bus_id = "ag71xx-mdio.0",
|
||||
.phy_addr = 0,
|
||||
.platform_data = &wpa8630_qca8337_data,
|
||||
},
|
||||
};
|
||||
|
||||
static void __init wpa8630_setup(void)
|
||||
{
|
||||
u8 *mac = (u8 *) KSEG1ADDR(0x1f00fc00);
|
||||
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
||||
|
||||
ath79_register_m25p80(&wpa8630_flash_data);
|
||||
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr,
|
||||
art + WPA8630_MAC0_OFFSET, 0);
|
||||
|
||||
platform_device_register(&ath79_mdio0_device);
|
||||
|
||||
mdiobus_register_board_info(wpa8630_mdio0_info,
|
||||
ARRAY_SIZE(wpa8630_mdio0_info));
|
||||
|
||||
/* GMAC0 is connected to an AR8337 switch */
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
||||
ath79_eth0_data.phy_mask = ~BIT(4);
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
|
||||
|
||||
ath79_register_eth(0);
|
||||
|
||||
ath79_register_wmac(art + WPA8630_WMAC_CALDATA_OFFSET, mac);
|
||||
|
||||
ap91_pci_init(art + WPA8630_PCI_CALDATA_OFFSET, NULL);
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(wpa8630_leds_gpio),
|
||||
wpa8630_leds_gpio);
|
||||
|
||||
ath79_register_gpio_keys_polled(-1, WPA8630_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(wpa8630_gpio_keys),
|
||||
wpa8630_gpio_keys);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_WPA8630, "WPA8630", "TP-Link WPA8630",
|
||||
wpa8630_setup);
|
||||
@ -258,6 +258,7 @@ enum ath79_mach_type {
|
||||
ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */
|
||||
ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */
|
||||
ATH79_MACH_WP543, /* Compex WP543 */
|
||||
ATH79_MACH_WPA8630, /* TP-Link WPA8630 */
|
||||
ATH79_MACH_WPE72, /* Compex WPE72 */
|
||||
ATH79_MACH_WPJ342, /* Compex WPJ342 */
|
||||
ATH79_MACH_WPJ344, /* Compex WPJ344 */
|
||||
|
||||
@ -913,3 +913,15 @@ define Device/tl-wa7210n-v2
|
||||
CONSOLE := ttyATH0,115200
|
||||
endef
|
||||
TARGET_DEVICES += tl-wa7210n-v2
|
||||
|
||||
define Device/wpa8630
|
||||
$(Device/tplink-8mlzma)
|
||||
DEVICE_TITLE := TP-LINK WPA8630
|
||||
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
|
||||
BOARDNAME := WPA8630
|
||||
DEVICE_PROFILE := WPA8630
|
||||
TPLINK_HWID := 0x86300001
|
||||
MTDPARTS = spi0.0:64k(u-boot)ro,1280k(kernel),6720k(rootfs),64k(mib0)ro,64k(ART)ro,8000k@0x10000(firmware)
|
||||
IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -a 0x10000
|
||||
endef
|
||||
TARGET_DEVICES += wpa8630
|
||||
|
||||
Loading…
Reference in New Issue
Block a user