mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
at91: add support for the WB45N module from Laird
This module from Laird includes the following: - CPU Atmel SoC ARM926EJS - Wifi AR6003 - Bluetooth CSR8510 - RAM 64MB LPDDR - FLASH 128MB The flash is a dual image layout, kernel a/b, rootfs a/b, and a user partition. Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
This commit is contained in:
Ben Whitten
Hauke Mehrtens
parent
618ed77a17
commit
86d037e4a2
220
target/linux/at91/files/arch/arm/boot/dts/wb45n.dts
Normal file
220
target/linux/at91/files/arch/arm/boot/dts/wb45n.dts
Normal file
@ -0,0 +1,220 @@
|
||||
/*
|
||||
* wb45n.dts - Device Tree file for WB45NBT board
|
||||
*
|
||||
* Copyright (C) 2015 Laird
|
||||
*
|
||||
* Licensed under GPLv2 or later.
|
||||
*/
|
||||
/dts-v1/;
|
||||
#include "at91sam9g25.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
|
||||
compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x20000000 0x4000000>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
main_clock: clock@0 {
|
||||
compatible = "atmel,osc", "fixed-clock";
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
|
||||
slow_xtal {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
main_xtal {
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
};
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
|
||||
rstc@fffffe00 {
|
||||
compatible = "atmel,sama5d3-rstc";
|
||||
};
|
||||
|
||||
pinctrl@fffff400 {
|
||||
nand {
|
||||
pinctrl_nand: nand-0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD0 periph A Read Enable */
|
||||
AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD1 periph A Write Enable */
|
||||
AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD2 periph A Address Latch Enable */
|
||||
AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD3 periph A Command Latch Enable */
|
||||
AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD4 gpio Chip Enable pin pull_up */
|
||||
AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD5 gpio RDY/BUSY pin pull_up */
|
||||
};
|
||||
};
|
||||
|
||||
usb2 {
|
||||
pinctrl_board_usb2: usb2-board {
|
||||
atmel,pins =
|
||||
<AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB11 gpio vbus sense, deglitch */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
dbgu: serial@fffff200 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usart0: serial@f801c000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usart3: serial@f8028000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
spi0: spi@f0000000 {
|
||||
status = "okay";
|
||||
cs-gpios = <&pioA 14 0>, <&pioA 7 0>, <0>, <0>;
|
||||
};
|
||||
|
||||
mmc0: mmc@f0008000 {
|
||||
pinctrl-0 = <
|
||||
&pinctrl_mmc0_slot0_clk_cmd_dat0
|
||||
&pinctrl_mmc0_slot0_dat1_3>;
|
||||
status = "okay";
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
macb0: ethernet@f802c000 {
|
||||
phy-mode = "rmii";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb2: gadget@f803c000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_board_usb2>;
|
||||
atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c1: i2c@f8014000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
watchdog@fffffe40 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
shdwc@fffffe10 {
|
||||
atmel,wakeup-mode = "low";
|
||||
};
|
||||
|
||||
rtc@fffffeb0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
usb0: ohci@00600000 {
|
||||
status = "okay";
|
||||
num-ports = <2>;
|
||||
atmel,vbus-gpio = <
|
||||
&pioB 12 GPIO_ACTIVE_HIGH
|
||||
&pioA 31 GPIO_ACTIVE_HIGH
|
||||
>;
|
||||
atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
usb1: ehci@00700000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
nand0: nand@40000000 {
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-mode = "hw";
|
||||
atmel,has-pmecc; /* Enable PMECC */
|
||||
atmel,pmecc-cap = <4>;
|
||||
atmel,pmecc-sector-size = <512>;
|
||||
nand-on-flash-bbt;
|
||||
status = "okay";
|
||||
|
||||
at91bootstrap@0 {
|
||||
label = "at91bs";
|
||||
reg = <0x0 0x20000>;
|
||||
};
|
||||
|
||||
uboot@20000 {
|
||||
label = "u-boot";
|
||||
reg = <0x20000 0x80000>;
|
||||
};
|
||||
|
||||
ubootenv@a0000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0xa0000 0x20000>;
|
||||
};
|
||||
|
||||
ubootenv@c0000 {
|
||||
label = "redund-env";
|
||||
reg = <0xc0000 0x20000>;
|
||||
};
|
||||
|
||||
kernel-a@e0000 {
|
||||
label = "kernel-a";
|
||||
reg = <0xe0000 0x280000>;
|
||||
};
|
||||
|
||||
kernel-b@360000 {
|
||||
label = "kernel-b";
|
||||
reg = <0x360000 0x280000>;
|
||||
};
|
||||
|
||||
rootfs-a@5e0000 {
|
||||
label = "rootfs-a";
|
||||
reg = <0x5e0000 0x2600000>;
|
||||
};
|
||||
|
||||
rootfs-b@2be0000 {
|
||||
label = "rootfs-b";
|
||||
reg = <0x2be0000 0x2600000>;
|
||||
};
|
||||
|
||||
user@51e0000 {
|
||||
label = "user";
|
||||
reg = <0x51e0000 0x2dc0000>;
|
||||
};
|
||||
|
||||
logs@7fa0000 {
|
||||
label = "logs";
|
||||
reg = <0x7fa0000 0x60000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
atheros {
|
||||
compatible = "atheros,ath6kl";
|
||||
atheros,board-id = "SD32";
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
irqbtn@pb18 {
|
||||
label = "IRQBTN";
|
||||
linux,code = <99>;
|
||||
gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
|
||||
gpio-key,wakeup = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -51,6 +51,12 @@ define Device/evaluation-dtb
|
||||
IMAGE/dtb := install-dtb
|
||||
endef
|
||||
|
||||
define Device/evaluation-fit
|
||||
$(Device/evaluation)
|
||||
KERNEL_SUFFIX := -fit-uImage.itb
|
||||
KERNEL := kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
||||
endef
|
||||
|
||||
define Device/production
|
||||
UBINIZE_OPTS := -E 5
|
||||
IMAGES := factory.bin
|
||||
|
||||
@ -116,3 +116,18 @@ define Device/at91-q5xr5
|
||||
KERNEL_SIZE := 2048k
|
||||
endef
|
||||
TARGET_DEVICES += at91-q5xr5
|
||||
|
||||
define Device/wb45n
|
||||
$(Device/evaluation-fit)
|
||||
DEVICE_TITLE := Laird WB45N
|
||||
DEVICE_PACKAGES := \
|
||||
kmod-mmc-at91 kmod-ath6kl-sdio ath6k-firmware \
|
||||
kmod-usb-storage kmod-fs-vfat kmod-fs-msdos \
|
||||
kmod-leds-gpio
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
SUBPAGESIZE := 2048
|
||||
MKUBIFS_OPTS := -m $$(PAGESIZE) -e 124KiB -c 955
|
||||
endef
|
||||
TARGET_DEVICES += wb45n
|
||||
|
||||
|
||||
@ -0,0 +1,12 @@
|
||||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -40,7 +40,8 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
|
||||
at91sam9g25ek.dtb \
|
||||
at91sam9g35ek.dtb \
|
||||
at91sam9x25ek.dtb \
|
||||
- at91sam9x35ek.dtb
|
||||
+ at91sam9x35ek.dtb \
|
||||
+ wb45n.dtb
|
||||
dtb-$(CONFIG_SOC_SAM_V7) += \
|
||||
at91-kizbox2.dtb \
|
||||
at91-sama5d2_xplained.dtb \
|
||||
Loading…
Reference in New Issue
Block a user