mirror of
https://github.com/openwrt/openwrt.git
synced 2025-02-01 08:48:08 +00:00
mediatek: rework Bananapi BPi-R2
* introduce recovery (=initramfs) vs. production dual boot scheme * make use of uImage.FIT (instead of FAT partition) * generate images using build steps (instead of external scripts) * simplify sysupgrade and config restore (thanks to uImage.FIT) * make sure mmc devices are ordered persistently (set DT aliases) This commit breaks sysupgrade from existing installations, you will have to re-install using the sdcard.img.gz image. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This commit is contained in:
Daniel Golle
parent
6b2000b6ff
commit
86a61e716e
@ -1,4 +1,4 @@
|
||||
config MTK_BOOT_PARTSIZE
|
||||
int "Boot (SD Card/eMMC) filesystem partition size (in MiB)"
|
||||
depends on TARGET_mediatek_mt7623_DEVICE_bpi_bananapi-r2 || TARGET_DEVICE_mediatek_mt7623_DEVICE_bpi_bananapi-r2 || TARGET_mediatek_mt7623_DEVICE_unielec_u7623-emmc || TARGET_DEVICE_mediatek_mt7623_DEVICE_unielec_u7623-emmc
|
||||
depends on TARGET_mediatek_mt7623_DEVICE_unielec_u7623-emmc || TARGET_DEVICE_mediatek_mt7623_DEVICE_unielec_u7623-emmc
|
||||
default 32
|
||||
|
||||
@ -1,60 +1,124 @@
|
||||
KERNEL_LOADADDR := 0x80008000
|
||||
DEVICE_VARS += UBOOT_TARGET UBOOT_OFFSET UBOOT_ENVSIZE
|
||||
|
||||
ifneq ($(CONFIG_MTK_BOOT_PARTSIZE),)
|
||||
BOOTFS_BLOCK_SIZE := 1024
|
||||
BOOTFS_BLOCKS := $(shell echo $$(($(CONFIG_MTK_BOOT_PARTSIZE)*1024*1024/$(BOOTFS_BLOCK_SIZE))))
|
||||
endif
|
||||
# The bootrom of MT7623 expects legacy MediaTek headers present in
|
||||
# exactly the location also used for the primary GPT partition table.
|
||||
# (*MMC_BOOT and BRLYT)
|
||||
# Hence only MSDOS/MBR partitioning can work here.
|
||||
#
|
||||
# ------------------------ Sector Offset
|
||||
# | MBR + SDMMC_BOOT | 0 0x0
|
||||
# |----------------------|
|
||||
# | BRLYT header | 1 0x200
|
||||
# |----------------------|
|
||||
# . .
|
||||
# . .
|
||||
# |----------------------|
|
||||
# | | 4 0x800
|
||||
# | |
|
||||
# | Preloader |
|
||||
# . .
|
||||
# . .
|
||||
# | | 639
|
||||
# |----------------------|
|
||||
# | MBR partition #1 | 640 0x50000
|
||||
# | |
|
||||
# | U-Boot |
|
||||
# . .
|
||||
# . .
|
||||
# | | 1663
|
||||
# |----------------------|
|
||||
# | MBR partition #2 |
|
||||
# | |
|
||||
# | Recovery |
|
||||
# . .
|
||||
# . (uImage.FIT) .
|
||||
# | |
|
||||
# |----------------------|
|
||||
# | MBR partition #3 |
|
||||
# | |
|
||||
# | Production |
|
||||
# | |
|
||||
# | (uImage.FIT, |
|
||||
# . rootfs_Data.) .
|
||||
# . .
|
||||
# | |
|
||||
# ------------------------
|
||||
#
|
||||
# For eMMC boot, everything up to and including the preloader must be
|
||||
# written to /dev/mmcblk0boot0, with the SDMMC_BOOT header changed to
|
||||
# read EMMC_BOOT\0 instead.
|
||||
#
|
||||
# The contents of the main eMMC are identical to the SD card layout,
|
||||
# with the preloader loading 512KiB of U-Boot starting at 0x50000.
|
||||
|
||||
define Build/mtk-mmc-img
|
||||
rm -f $@.boot
|
||||
mkfs.fat -C $@.boot $(BOOTFS_BLOCKS)
|
||||
define Build/mt7623-mbr
|
||||
cp $@ $@.tmp 2>/dev/null || true
|
||||
ptgen -o $@.tmp -h 4 -s 63 -a 0 -l 1024 \
|
||||
-t 0x41 -N uboot -p 3584k@320k \
|
||||
-t 0xea -N recovery -p 40M@4M \
|
||||
$(if $(findstring sdmmc,$1), \
|
||||
-t 0x2e -N production -p 208M@48M \
|
||||
) \
|
||||
$(if $(findstring emmc,$1), \
|
||||
-t 0x2e -N production -p 976M@48M \
|
||||
)
|
||||
|
||||
if [ -r $(STAGING_DIR_IMAGE)/$(UBOOT_TARGET)-preloader.bin ]; then \
|
||||
./gen_mtk_mmc_img.sh emmc $@.emmc \
|
||||
$(STAGING_DIR_IMAGE)/$(UBOOT_TARGET)-preloader.bin; \
|
||||
mcopy -i $@.boot $@.emmc ::eMMCboot.bin; \
|
||||
fi
|
||||
mkenvimage -s $(UBOOT_ENVSIZE) -o $(STAGING_DIR_IMAGE)/$(UBOOT_TARGET)-uboot.env $(UBOOT_TARGET)-uEnv.txt
|
||||
mcopy -i $@.boot $(STAGING_DIR_IMAGE)/$(UBOOT_TARGET)-uboot.env ::uboot.env
|
||||
mcopy -i $@.boot $(IMAGE_KERNEL) ::uImage
|
||||
./gen_mtk_mmc_img.sh sd $@ \
|
||||
$(STAGING_DIR_IMAGE)/$(UBOOT_TARGET)-preloader.bin \
|
||||
$(STAGING_DIR_IMAGE)/$(UBOOT_TARGET)-u-boot*.bin \
|
||||
$(UBOOT_OFFSET) \
|
||||
$@.boot \
|
||||
$(IMAGE_ROOTFS) \
|
||||
$(CONFIG_MTK_BOOT_PARTSIZE) \
|
||||
$(CONFIG_TARGET_ROOTFS_PARTSIZE)
|
||||
echo -en \
|
||||
$(if $(findstring sdmmc,$1),"SDMMC_BOOT\x00\x00\x01\x00\x00\x00\x00\x02\x00\x00") \
|
||||
$(if $(findstring emmc,$1),"EMMC_BOOT\x00\x00\x00\x01\x00\x00\x00\x00\x02\x00\x00") \
|
||||
| dd bs=1 of="$@.tmp" seek=0 conv=notrunc
|
||||
|
||||
echo -en "BRLYT\x00\x00\x00\x01\x00\x00\x00\x00\x08\x00\x00\x00\x08\x00\x00\x42\x42\x42\x42\x08\x00\x01\x00\x00\x08\x00\x00\x00\x08\x00\x00\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"\
|
||||
| dd bs=1 of="$@.tmp" seek=512 conv=notrunc
|
||||
|
||||
cat $@.tmp >> $@
|
||||
rm $@.tmp
|
||||
endef
|
||||
|
||||
define Build/preloader
|
||||
$(CP) $(STAGING_DIR_IMAGE)/$1-preloader.bin $@
|
||||
define Build/append-preloader
|
||||
cat $(STAGING_DIR_IMAGE)/$1-preloader.bin >> $@
|
||||
endef
|
||||
|
||||
define Build/append-bootloader
|
||||
cat $(STAGING_DIR_IMAGE)/$1-u-boot.bin >> $@
|
||||
endef
|
||||
|
||||
define Device/bananapi_bpi-r2
|
||||
DEVICE_VENDOR := Bananapi
|
||||
DEVICE_MODEL := BPi-R2
|
||||
DEVICE_DTS := mt7623n-bananapi-bpi-r2
|
||||
DEVICE_PACKAGES := kmod-mmc mkf2fs e2fsprogs kmod-usb3 kmod-ata-ahci
|
||||
UBOOT_ENVSIZE := 0x10000
|
||||
UBOOT_OFFSET := 320k
|
||||
UBOOT_TARGET := mt7623n_bpir2
|
||||
UBOOT_PATH := $(STAGING_DIR_IMAGE)/mt7623n_bpir2-u-boot.bin
|
||||
IMAGES := sysupgrade.itb
|
||||
KERNEL := kernel-bin | gzip
|
||||
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
||||
KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb with-initrd
|
||||
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb external-static-with-rootfs | append-metadata
|
||||
ARTIFACT/preloader.bin := append-preloader $$(UBOOT_TARGET)
|
||||
ARTIFACT/u-boot.bin := append-uboot
|
||||
ARTIFACT/sdcard.img.gz := mt7623-mbr sdmmc |\
|
||||
pad-to 2k | append-preloader $$(UBOOT_TARGET) |\
|
||||
pad-to 320k | append-bootloader $$(UBOOT_TARGET) |\
|
||||
pad-to 4092k | mt7623-mbr emmc |\
|
||||
pad-to 4M | append-image-stage initramfs-recovery.itb |\
|
||||
pad-to 48M | append-image squashfs-sysupgrade.itb |\
|
||||
gzip
|
||||
ARTIFACTS = u-boot.bin preloader.bin scatter.txt sdcard.img.gz
|
||||
SUPPORTED_DEVICES := bananapi,bpi-r2
|
||||
endef
|
||||
TARGET_DEVICES += bananapi_bpi-r2
|
||||
|
||||
|
||||
|
||||
define Build/scatterfile
|
||||
./gen_scatterfile.sh $(subst mt,MT,$(SUBTARGET)) "$1" \
|
||||
$(subst -scatter.txt,,$(notdir $@)) "$(DEVICE_TITLE)" > $@
|
||||
endef
|
||||
|
||||
define Device/bpi_bananapi-r2
|
||||
DEVICE_VENDOR := Bpi
|
||||
DEVICE_MODEL := Banana Pi R2
|
||||
DEVICE_DTS := mt7623n-bananapi-bpi-r2
|
||||
DEVICE_PACKAGES := kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1 kmod-mmc \
|
||||
mkf2fs e2fsprogs kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk
|
||||
UBOOT_ENVSIZE := 0x2000
|
||||
UBOOT_OFFSET := 320k
|
||||
UBOOT_TARGET := mt7623n_bpir2
|
||||
IMAGES := img.gz
|
||||
IMAGE/img.gz := mtk-mmc-img | gzip | append-metadata
|
||||
ARTIFACT/preloader.bin := preloader $$(UBOOT_TARGET)
|
||||
ARTIFACT/scatter.txt := scatterfile $$(firstword $$(FILESYSTEMS))-$$(firstword $$(IMAGES))
|
||||
ARTIFACTS = preloader.bin scatter.txt
|
||||
SUPPORTED_DEVICES := bananapi,bpi-r2
|
||||
endef
|
||||
TARGET_DEVICES += bpi_bananapi-r2
|
||||
|
||||
# Full eMMC image including U-Boot and partition table
|
||||
define Device/unielec_u7623-emmc
|
||||
DEVICE_VENDOR := UniElec
|
||||
|
||||
@ -1,78 +0,0 @@
|
||||
# Boot menu for Banana Pi R2
|
||||
# Copyright © 2020 David Woodhouse <dwmw2@infradead.org>
|
||||
|
||||
kernel=uImage
|
||||
loadaddr=0x88000000
|
||||
dtaddr=0x83f00000
|
||||
fdt_high=0xffffffff
|
||||
|
||||
console=ttyS2,115200
|
||||
bootopts=rootfstype=squashfs,ext4 rootwait
|
||||
|
||||
# Create the command line (with appropriate root=) and boot the Linux FIT image.
|
||||
boot1=setenv bootargs "console=${console} root=${rootdev} ${bootopts}";printenv bootargs;\
|
||||
fatload mmc ${partition} ${loadaddr} ${kernel}; bootm
|
||||
|
||||
# The preloader leaves a breadcrumb behind to say what it booted from.
|
||||
checkbootedfrom=if itest.l *81dffff0 == 434d4d65 ; then setenv bootedfrom eMMC; else setenv bootedfrom SD; fi;
|
||||
|
||||
# Build the boot menu one item at a time
|
||||
bm_count=0
|
||||
checkkernel=test -e mmc ${bm_part} ${kernel}
|
||||
addbm=if run checkkernel; then setenv bootmenu_${bm_count} "Boot from ${bm_dev}.=setenv partition ${bm_part};setenv rootdev ${bm_root};run boot1";if test "${bootedfrom}" = "${bm_dev}"; then setenv bootmenu_default ${bm_count};fi;setexpr bm_count ${bm_count} + 1; fi
|
||||
# Here we assume that SD card id mmcblk1 and eMMC is mmcblk0 in linux. Swap them if your DTS define them in reverse order.
|
||||
addeMMCbm=setenv bm_part 0:2;setenv bm_root /dev/mmcblk0p3;setenv bm_dev eMMC;run addbm
|
||||
addSDbm=setenv bm_part 1:2;setenv bm_root /dev/mmcblk1p3;setenv bm_dev SD;run addbm
|
||||
addinstallbm=if test "${bootedfrom}" = "SD";then run checkinstall; if run validparts; then setenv bootmenu_${bm_count} "Install OpenWrt from SD to internal eMMC.=run doinstall";setexpr bm_count ${bm_count} + 1;fi;fi
|
||||
|
||||
runbootmenu=if test "${bootedfrom}" = "";then run checkbootedfrom;fi;\
|
||||
setenv bm_count 0;run addeMMCbm;run addSDbm;run addinstallbm;setenv bootmenu_${bm_count};\
|
||||
bootmenu
|
||||
|
||||
bootdelay=0
|
||||
bootcmd=run checkbootedfrom;run runbootmenu
|
||||
|
||||
# XX: Can we read this from the device, or must we trust they're all the same as mine?
|
||||
# Probably not that important as we're unlikely ever to hit the limit anyway.
|
||||
maxsect=0xe8ffff
|
||||
validparts=false
|
||||
|
||||
# We could use 'part size' here but I'd like to check the types too.
|
||||
checkinstall=mmc dev 1;\
|
||||
mmc read 0x88000002 0 1;\
|
||||
setenv validparts true;\
|
||||
test -e mmc 1:2 eMMCboot.bin || setenv validparts false && echo "eMMCboot.bin not present on SD partition 2";\
|
||||
if run validparts && itest.b *0x880001c4 != 0x41; then echo "SD partition 1 is not a PReP Boot partition"; setenv validparts false; fi;\
|
||||
if run validparts && itest.l *0x880001c8 != 0x280; then echo "SD partition 1 does not start at 320KiB for U-Boot"; mmc part; exit; fi;\
|
||||
if run validparts && itest.l *0x880001cc != 0x400; then echo "SD partition 1 is not 512KiB in size for U-Boot"; mmc part; exit; fi;\
|
||||
if run validparts && itest.b *0x880001d4 != 0x0c; then echo "SD partition 2 is not a FAT32 partition"; setenv validparts false; fi;\
|
||||
if run validparts && itest.b *0x880001e4 != 0x83; then echo "SD partition 3 is not a Linux partition"; setenv validparts false; fi;\
|
||||
setexpr.l part2_start *0x880001d8;setexpr.l part2_len *0x880001dc;setexpr.l part3_start *0x880001e8;setexpr.l part3_len *0x880001ec;\
|
||||
if run validparts && test 0x${part2_start} -gt ${maxsect}; then echo "SD partition 2 start too high"; setenv validparts false; fi;\
|
||||
if run validparts && test 0x${part2_len} -gt ${maxsect}; then echo "SD partition 2 is too large"; setenv validparts false; fi;\
|
||||
if run validparts && test 0x${part3_start} -gt ${maxsect}; then echo "SD partition 3 start too high"; setenv validparts false; fi;\
|
||||
if run validparts && test 0x${part3_len} -gt ${maxsect}; then echo "SD partition 2 is too large"; setenv validparts false; fi;\
|
||||
setexpr.l part2_end 0x$(part2_start} + 0x${part2_len};setexpr.l part3_end 0x${part3_start} + 0x${part3_len};\
|
||||
if run validparts && test 0x${part2_end} -ge ${maxsect}; then echo "SD partition 2 end too high"; setenv validparts false; fi;\
|
||||
if run validparts && test 0x${part3_end} -ge ${maxsect}; then echo "SD partition 3 end too high"; setenv validparts false; fi;
|
||||
|
||||
# Copy a single chunk, up to 0x8000 sectors / 16MiB, from SD to eMMC at the specified offset.
|
||||
writechunk=setenv thislen 8000; if test 0x${partlen} -lt 0x${thislen}; then setenv thislen ${partlen};fi;\
|
||||
mmc dev 1;mmc read ${loadaddr} 0x${partofs} 0x${thislen};\
|
||||
mmc dev 0; mmc write ${loadaddr} 0x${partofs} 0x${thislen};\
|
||||
setexpr partofs 0x${partofs} + 0x${thislen};setexpr partlen 0x${partlen} - 0x${thislen}
|
||||
|
||||
# Copy a partition defined by ${partofs} / ${partlen} from SD to eMMC
|
||||
writepart=while test 0x${partlen} -ne 0; do run writechunk; done
|
||||
|
||||
# Configure the eMMC boot partition and write eMMCboot.bin to it
|
||||
writeboot=mmc partconf 0 1 1 0;fatload mmc 1:2 ${loadaddr} eMMCboot.bin;\
|
||||
setexpr filesize ${filesize} + 0x1ff;setexpr blocks ${filesize} / 0x200;\
|
||||
mmc dev 0 1;mmc write ${loadaddr} 0 ${blocks}
|
||||
|
||||
# Install OpenWrt from the SD card to internal eMMC.
|
||||
doinstall=run checkinstall;if run validparts;then run writeboot;\
|
||||
echo "Copying preloader and U-Boot";setenv partofs 0;setenv partlen 680;run writepart;\
|
||||
echo "Copying FAT boot partition";setenv partofs ${part2_start};setenv partlen ${part2_len};run writepart;\
|
||||
echo "Copying root partition";setenv partofs ${part3_start};setenv partlen ${part3_len};run writepart;\
|
||||
echo "Installed OpenWrt to eMMC";setenv bootedfrom eMMC;run runbootmenu;fi
|
||||
@ -6,9 +6,6 @@ move_config() {
|
||||
local partdev partnum
|
||||
|
||||
case $(board_name) in
|
||||
bananapi,bpi-r2)
|
||||
partnum=2
|
||||
;;
|
||||
unielec,u7623-02-emmc-512m)
|
||||
if grep -q root=/dev/mmcblk0p2 /proc/cmdline; then
|
||||
partnum=1;
|
||||
|
||||
@ -1,5 +1,6 @@
|
||||
|
||||
REQUIRE_IMAGE_METADATA=1
|
||||
RAMFS_COPY_BIN='blockdev'
|
||||
|
||||
# Full system upgrade including preloader for MediaTek SoCs on eMMC or SD
|
||||
mtk_mmc_full_upgrade() {
|
||||
@ -83,7 +84,18 @@ platform_do_upgrade() {
|
||||
|
||||
case "$board" in
|
||||
bananapi,bpi-r2)
|
||||
mtk_mmc_full_upgrade "$1"
|
||||
export_bootdevice
|
||||
export_partdevice rootdev 0
|
||||
export_partdevice fitpart 3
|
||||
[ "$fitpart" ] || return 1
|
||||
dd if=/dev/zero of=/dev/$fitpart bs=4096 count=1 2>/dev/null
|
||||
blockdev --rereadpt /dev/$rootdev
|
||||
get_image "$1" | dd of=/dev/$fitpart
|
||||
blockdev --rereadpt /dev/$rootdev
|
||||
local datapart=$(get_partition_by_name $rootdev "rootfs_data")
|
||||
[ "$datapart" ] || return 0
|
||||
dd if=/dev/zero of=/dev/$datapart bs=4096 count=1 2>/dev/null
|
||||
echo $datapart > /tmp/sysupgrade.datapart
|
||||
;;
|
||||
|
||||
unielec,u7623-02-emmc-512m)
|
||||
@ -126,32 +138,10 @@ platform_check_image() {
|
||||
|
||||
case "$board" in
|
||||
bananapi,bpi-r2)
|
||||
[ "$magic" != "53444d4d" ] && {
|
||||
[ "$magic" != "d00dfeed" ] && {
|
||||
echo "Invalid image type."
|
||||
return 1
|
||||
}
|
||||
export_bootdevice && export_partdevice diskdev 0 || {
|
||||
echo "Unable to determine upgrade device"
|
||||
return 1
|
||||
}
|
||||
|
||||
get_partitions "/dev/$diskdev" bootdisk
|
||||
|
||||
#extract the boot sector from the image
|
||||
get_image "$@" | dd of=/tmp/image.bs count=1 bs=512b 2>/dev/null
|
||||
|
||||
get_partitions /tmp/image.bs image
|
||||
|
||||
#compare tables
|
||||
diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
|
||||
|
||||
rm -f /tmp/image.bs /tmp/partmap.bootdisk /tmp/partmap.image
|
||||
|
||||
if [ -n "$diff" ]; then
|
||||
echo "Partition layout has changed. Full image will be written."
|
||||
ask_bool 0 "Abort" && exit 1
|
||||
return 0
|
||||
fi
|
||||
;;
|
||||
unielec,u7623-02-emmc-512m)
|
||||
# Can always upgrade to the new-style full image
|
||||
@ -180,9 +170,19 @@ platform_check_image() {
|
||||
return 0
|
||||
}
|
||||
|
||||
platform_copy_config_mmc() {
|
||||
[ -e "$UPGRADE_BACKUP" ] || return
|
||||
local datapart=$(cat /tmp/sysupgrade.datapart)
|
||||
[ "$datapart" ] || echo "no rootfs_data partition, cannot keep configuration." >&2
|
||||
dd if="$UPGRADE_BACKUP" of=/dev/$datapart
|
||||
sync
|
||||
}
|
||||
|
||||
platform_copy_config() {
|
||||
case "$(board_name)" in
|
||||
bananapi,bpi-r2|\
|
||||
bananapi,bpi-r2)
|
||||
platform_copy_config_mmc
|
||||
;;
|
||||
unielec,u7623-02-emmc-512m)
|
||||
# platform_do_upgrade() will have set $recoverydev
|
||||
if [ -n "$recoverydev" ]; then
|
||||
|
||||
@ -229,6 +229,7 @@ CONFIG_HARDIRQS_SW_RESEND=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT_MAP=y
|
||||
CINFIG_HAVE_ARM_ARCH_TIMER=y
|
||||
CONFIG_HAVE_SMP=y
|
||||
CONFIG_HDMI=y
|
||||
CONFIG_HIGHMEM=y
|
||||
|
||||
@ -0,0 +1,11 @@
|
||||
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
|
||||
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
|
||||
@@ -19,7 +19,7 @@
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:115200n8";
|
||||
- bootargs = "console=ttyS2,115200n8";
|
||||
+ bootargs = "earlycon=uart8250,mmio32,0x11004000 console=ttyS2,115200n8";
|
||||
};
|
||||
|
||||
connector {
|
||||
@ -0,0 +1,11 @@
|
||||
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
|
||||
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
|
||||
@@ -15,6 +15,8 @@
|
||||
|
||||
aliases {
|
||||
serial2 = &uart2;
|
||||
+ mmc0 = &mmc0;
|
||||
+ mmc1 = &mmc1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
Loading…
x
Reference in New Issue
Block a user