ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-30 10:39:04 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity

kirkwood: add D-Link DNS-320L support

Browse Source 
Dual-slot NAS based on Marvell Kirkwood.

Specifications:
 - Marvell 88F6702 @1GHz
 - 256Mb RAM
 - 128Mb NAND
 - 1x GbE LAN (Marvell 88E1318R)
 - 1x USB 2.0
 - 2x SATA
 - Weltrend WT69P3 ("supervisor" MCU chip)
 - Serial on J2 (115200,8n1)
 - Newer bootROM so kwboot-ing via serial is possible

Notes:
 - The Weltrend MCU is controlled by the package added in utils/dns320l-mcu.
 - The original MAC address is stored in the "mini firmware" image's first
   17 bytes.
 - Compared to the original MTD layout, the uImage+rootfs are now stored in
   a common ubi partition.

Installation:
1. Serial console
 - Connect your levelshifter to the serial console
   on J2 (refer to the wiki page for pinout)
2. Update u-boot
 - Download the u-boot.kwb image for the device
 - Powercycle the NAS
 - Run "kwboot -b u-boot-dns320l/u-boot.kwb /dev/ttyUSB0 -p"
 - Connect to the serial console with minicom
 - tftp 0x0800000 u-boot-dns320l/u-boot.kwb
   (Please note that "PHY reset timed out" seems to be customary
    on kirkwood devices, the egiga0 interface works regardless.)
 - nand erase 0x0 100000
 - nand write 0x0800000 0x0 0x100000
 - reset
3. Install OpenWrt
 - Boot up the initramfs image
 - tftpboot 0x800000 openwrt-kirkwood-generic-dlink_dns320l-initramfs-uImage; bootm 0x800000
 - Download the sysupgrade image and perform sysupgrade

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Reviewed-by: Pawel Dembicki <paweldembicki@gmail.com>
This commit is contained in:
Zoltan HERPAI 2024-01-05 18:42:53 +01:00
parent ab9bb79d8e
commit 8619d7af67
12 changed files with 932 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
package/boot/uboot-envtools/Makefile
View File

@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk
PKG_NAME:=uboot-envtools
PKG_DISTNAME:=u-boot
PKG_VERSION:=2024.01
PKG_RELEASE:=2
PKG_RELEASE:=3
PKG_SOURCE:=$(PKG_DISTNAME)-$(PKG_VERSION).tar.bz2
PKG_SOURCE_URL:= \

1
package/boot/uboot-envtools/files/kirkwood
View File

@ -15,6 +15,7 @@ case "$board" in
checkpoint,l-50|\
cloudengines,pogoe02|\
cloudengines,pogoplugv4|\
dlink,dns320l|\
globalscale,sheevaplug|\
iom,ix2-200|\
iom,ix4-200d|\

8
package/boot/uboot-kirkwood/Makefile
View File

@ -8,7 +8,7 @@
include $(TOPDIR)/rules.mk
PKG_VERSION:=2020.04
PKG_RELEASE:=9
PKG_RELEASE:=10
PKG_HASH:=fe732aaf037d9cc3c0909bad8362af366ae964bbdac6913a34081ff4ad565372
@ -20,6 +20,11 @@ define U-Boot/Default
BUILD_SUBTARGET:=generic
endef
define U-Boot/dns320l
NAME:=D-Link DNS-320L
BUILD_DEVICES:=dlink_dns320l
endef
define U-Boot/dockstar
NAME:=Seagate DockStar
BUILD_DEVICES:=seagate_dockstar
@ -106,6 +111,7 @@ define U-Boot/sheevaplug
endef
UBOOT_TARGETS := \
dns320l \
dockstar dockstar_second_stage \
goflexhome \
ib62x0 ib62x0_second_stage \

387
package/boot/uboot-kirkwood/patches/190-dns-320l.patch Normal file
View File

@ -0,0 +1,387 @@
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -28,6 +28,9 @@ config TARGET_POGO_E02
config TARGET_POGOPLUGV4
bool "Pogoplug V4 Board"
+config TARGET_DNS320L
+ bool "dns320l Board"
+
config TARGET_DNS325
bool "dns325 Board"
@@ -93,6 +96,7 @@ source "board/Marvell/sheevaplug/Kconfig
source "board/buffalo/lsxl/Kconfig"
source "board/cloudengines/pogo_e02/Kconfig"
source "board/cloudengines/pogoplugv4/Kconfig"
+source "board/d-link/dns320l/Kconfig"
source "board/d-link/dns325/Kconfig"
source "board/iomega/iconnect/Kconfig"
source "board/keymile/Kconfig"
--- /dev/null
+++ b/board/d-link/dns320l/dns320l.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015
+ * Gerald Kerma <dreagle@doukki.net>
+ * Tony Dinh <mibodhi@gmail.com>
+ */
+
+#include <common.h>
+#include <miiphy.h>
+#include <net.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <asm/arch/mpp.h>
+#include <asm/arch/gpio.h>
+#include <asm/io.h>
+#include "dns320l.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+ /*
+ * default gpio configuration
+ * There are maximum 64 gpios controlled through 2 sets of registers
+ * the below configuration configures mainly initial LED status
+ */
+ mvebu_config_gpio(DNS320L_OE_VAL_LOW, DNS320L_OE_VAL_HIGH,
+ DNS320L_OE_LOW, DNS320L_OE_HIGH);
+
+ /* (all LEDs & power off active high) */
+ /* Multi-Purpose Pins Functionality configuration */
+ static const u32 kwmpp_config[] = {
+ MPP0_NF_IO2,
+ MPP1_NF_IO3,
+ MPP2_NF_IO4,
+ MPP3_NF_IO5,
+ MPP4_NF_IO6,
+ MPP5_NF_IO7,
+ MPP6_SYSRST_OUTn,
+ MPP7_GPO,
+ MPP8_TW_SDA,
+ MPP9_TW_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP12_GPO,
+ MPP13_GPIO,
+ MPP14_GPIO,
+ MPP15_GPIO,
+ MPP16_GPIO,
+ MPP17_GPIO,
+ MPP18_NF_IO0,
+ MPP19_NF_IO1,
+ MPP20_SATA1_ACTn, /* sata1(left) status led */
+ MPP21_SATA0_ACTn, /* sata0(right) status led */
+ MPP22_GPIO,
+ MPP23_GPIO,
+ MPP24_GPIO,
+ MPP25_GPIO,
+ MPP26_GPIO,
+ MPP27_GPIO,
+ MPP28_GPIO,
+ MPP29_GPIO,
+ MPP30_GPIO,
+ MPP31_GPIO,
+ MPP32_GPIO,
+ 0
+ };
+ kirkwood_mpp_conf(kwmpp_config, NULL);
+
+ kw_gpio_set_value(DNS320L_GPIO_SATA_EN , 1);
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
+
+ return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+/* Configure and initialize PHY */
+void reset_phy(void)
+{
+ u16 reg;
+ u16 phyaddr;
+ char *name = "egiga0";
+
+ if (miiphy_set_current_dev(name))
+ return;
+
+ /* read PHY dev address */
+ if (miiphy_read(name, 0xee, 0xee, (u16 *) &phyaddr)) {
+ printf("could not read PHY dev address\n");
+ return;
+ }
+
+ /* set RGMII delay */
+ miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, MV88E1318_MAC_CTRL_PG);
+ miiphy_read(name, phyaddr, MV88E1318_MAC_CTRL_REG, &reg);
+ reg |= (MV88E1318_RGMII_RX_CTRL | MV88E1318_RGMII_TX_CTRL);
+ miiphy_write(name, phyaddr, MV88E1318_MAC_CTRL_REG, reg);
+ miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, 0);
+
+ /* reset PHY */
+ if (miiphy_reset(name, phyaddr))
+ return;
+
+ printf("MV88E1318 PHY initialized on %s\n", name);
+}
+#endif /* CONFIG_RESET_PHY_R */
--- /dev/null
+++ b/board/d-link/dns320l/dns320l.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2011
+ * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
+ *
+ * Based on Kirkwood support:
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ */
+
+#ifndef __DNS320L_H
+#define __DNS320L_H
+
+/* GPIO configuration */
+#define DNS320L_GPIO_SATA_EN 24
+#define HDD_L_GREEN_LED (1 << 22)
+#define HDD_R_GREEN_LED (1 << 23)
+#define USB_BLUE_LED (1 << 25)
+#define USB_ORANGE_LED (1 << 26)
+
+#define DNS320L_OE_LOW (~(HDD_L_GREEN_LED | HDD_R_GREEN_LED | \
+ USB_BLUE_LED | USB_ORANGE_LED))
+#define DNS320L_OE_VAL_LOW (0)
+
+/* high GPIO's */
+#define WATCHDOG_SIGNAL (1 << 14)
+
+#define DNS320L_OE_HIGH (~(WATCHDOG_SIGNAL))
+#define DNS320L_OE_VAL_HIGH ((WATCHDOG_SIGNAL))
+
+/* PHY related */
+#define MV88E1318_PGADR_REG 22
+#define MV88E1318_MAC_CTRL_PG 2
+#define MV88E1318_MAC_CTRL_REG 21
+#define MV88E1318_RGMII_TX_CTRL (1 << 4)
+#define MV88E1318_RGMII_RX_CTRL (1 << 5)
+
+#endif /* __DNS320L_H */
--- /dev/null
+++ b/board/d-link/dns320l/Kconfig
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2015
+# Gerald Kerma <dreagle@doukki.net>
+# Tony Dinh <mibodhi@gmail.com>
+
+if TARGET_DNS320L
+
+config SYS_BOARD
+ default "dns320l"
+
+config SYS_VENDOR
+ default "d-link"
+
+config SYS_CONFIG_NAME
+ default "dns320l"
+
+endif
--- /dev/null
+++ b/board/d-link/dns320l/kwbimage.cfg
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2015
+# Gerald Kerma <dreagle@doukki.net>
+# Tony Dinh <mibodhi@gmail.com>
+# Refer to doc/README.kwbimage for more details about how-to
+# configure and create kirkwood boot images.
+#
+
+# Boot Media configurations
+BOOT_FROM nand
+NAND_ECC_MODE default
+NAND_PAGE_SIZE 0x0800
+
+# Configure RGMII-0 interface pad voltage to 1.8V
+DATA 0xFFD100e0 0x1b1b1b9b
+
+DATA 0xFFD01400 0x43010c30
+DATA 0xFFD01404 0x39543000
+DATA 0xFFD01408 0x22125451
+DATA 0xFFD0140C 0x00000833
+DATA 0xFFD01410 0x0000000C
+DATA 0xFFD01414 0x00000000
+DATA 0xFFD01418 0x00000000
+DATA 0xFFD0141C 0x00000652
+DATA 0xFFD01420 0x00000004
+DATA 0xFFD01424 0x0000F17F
+DATA 0xFFD01428 0x00085520
+DATA 0xFFD0147c 0x00008552
+DATA 0xFFD01504 0x0FFFFFF1
+DATA 0xFFD01508 0x10000000
+DATA 0xFFD0150C 0x00000000
+DATA 0xFFD01514 0x00000000
+DATA 0xFFD0151C 0x00000000
+DATA 0xFFD01494 0x00010000
+DATA 0xFFD01498 0x00000000
+DATA 0xFFD0149C 0x0000E403
+DATA 0xFFD01480 0x00000001
+DATA 0xFFD20134 0x66666666
+DATA 0xFFD20138 0x66666666
+DATA 0x0 0x0
--- /dev/null
+++ b/board/d-link/dns320l/MAINTAINERS
@@ -0,0 +1,8 @@
+NSA310S BOARD
+M: Gerald Kerma <dreagle@doukki.net>
+M: Tony Dinh <mibodhi@gmail.com>
+M: Luka Perkov <luka.perkov@sartura.hr>
+S: Maintained
+F: board/d-link/dns320l/
+F: include/configs/dns320l.h
+F: configs/dns320l_defconfig
--- /dev/null
+++ b/board/d-link/dns320l/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2015
+# Gerald Kerma <dreagle@doukki.net>
+# Tony Dinh <mibodhi@gmail.com>
+
+obj-y := dns320l.o
--- /dev/null
+++ b/configs/dns320l_defconfig
@@ -0,0 +1,48 @@
+CONFIG_ARM=y
+CONFIG_SYS_DCACHE_OFF=y
+CONFIG_ARCH_CPU_INIT=y
+CONFIG_KIRKWOOD=y
+CONFIG_SYS_TEXT_BASE=0x600000
+CONFIG_TARGET_DNS320L=y
+CONFIG_ENV_SIZE=0x20000
+CONFIG_ENV_OFFSET=0x100000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_BOOTDELAY=3
+CONFIG_USE_PREBOOT=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="dns320l => "
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_IDE=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_JFFS2=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0x100000@0x0(uboot),0x20000@0x100000(ubootenv),0x6de0000@0x120000(ubi),0xa00000@0x6f00000(mini),0x500000@0x7900000(config),0x200000@0x7e00000(my-dlink)"
+CONFIG_CMD_UBI=y
+CONFIG_ISO_PARTITION=y
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_MVSATA_IDE=y
+# CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MVGBE=y
+CONFIG_MII=y
+CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_LZMA=y
+CONFIG_LZO=y
+CONFIG_OF_LIBFDT=y
+CONFIG_NET_RANDOM_ETHADDR=y
--- /dev/null
+++ b/include/configs/dns320l.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015
+ * Gerald Kerma <dreagle@doukki.net>
+ * Tony Dinh <mibodhi@gmail.com>
+ * Luka Perkov <luka.perkov@sartura.hr>
+ */
+
+#ifndef _CONFIG_DNS320L_H
+#define _CONFIG_DNS320L_H
+
+/* high level configuration options */
+#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
+#define CONFIG_KW88F6192 1 /* SOC Name */
+#define CONFIG_KW88F6702 1 /* SOC Name */
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+
+/* compression configuration */
+#define CONFIG_BZIP2
+
+/* commands configuration */
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+/* environment variables configuration */
+
+/* default environment variables */
+#define CONFIG_BOOTCOMMAND \
+ "ubi part ubi; " \
+ "ubi read 0x800000 kernel; " \
+ "bootm 0x800000"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console=console=ttyS0,115200\0" \
+ "mtdids=nand0=orion_nand\0" \
+ "mtdparts="CONFIG_MTDPARTS_DEFAULT "\0" \
+ "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0"
+
+/* Ethernet driver configuration */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_NETCONSOLE
+#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
+#define CONFIG_PHY_BASE_ADR 1
+#define CONFIG_RESET_PHY_R
+#endif /* CONFIG_CMD_NET */
+
+/* SATA driver configuration */
+#ifdef CONFIG_IDE
+#define __io
+#define CONFIG_IDE_PREINIT
+#define CONFIG_MVSATA_IDE_USE_PORT0
+#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
+#endif /* CONFIG_IDE */
+
+/*
+ * Enable GPI0 support
+*/
+#define CONFIG_KIRKWOOD_GPIO
+
+/* RTC driver configuration */
+#ifdef CONFIG_CMD_DATE
+#define CONFIG_RTC_MV
+#endif /* CONFIG_CMD_DATE */
+
+#endif /* _CONFIG_DNS320L_H */

36
package/utils/dns320l-mcu/Makefile Normal file
View File

@ -0,0 +1,36 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=dns320l-mcu
PKG_RELEASE:=1
PKG_SOURCE_PROTO:=git
PKG_SOURCE_URL=https://github.com/wigyori/dns320l-daemon.git
PKG_SOURCE_DATE:=2024-05-11
PKG_SOURCE_VERSION:=c74941880e0a8d2bc0344b3256b984397512e8c3
PKG_MIRROR_HASH:=e0f186a0c139ccfac3d311f49e2fecdbd02fa3f9fe6ced4b1ce0baa603d49fc3
PKG_MAINTAINER:=Zoltan HERPAI <wigyori@uid0.hu>
PKG_LICENSE:=GPL-3.0+
include $(INCLUDE_DIR)/package.mk
define Package/dns320l-mcu
SECTION:=utils
CATEGORY:=Utilities
TITLE:=Utility to control the MCU on DNS-320L
DEPENDS:=@TARGET_kirkwood
URL:=https://github.com/wigyori/dns320l-mcu
endef
define Build/Compile
$(MAKE) -C $(PKG_BUILD_DIR) \
CC="$(TARGET_CC)" \
CFLAGS="$(TARGET_CFLAGS) -Wall"
endef
define Package/dns320l-mcu/install
$(INSTALL_DIR) $(1)/usr/bin $(1)/etc/init.d
$(INSTALL_BIN) ./files/dns320l-mcu.init $(1)/etc/init.d/dns320l-mcu
$(INSTALL_BIN) $(PKG_BUILD_DIR)/dns320l-daemon $(1)/usr/bin/dns320l-mcu
endef
$(eval $(call BuildPackage,dns320l-mcu))

14
package/utils/dns320l-mcu/files/dns320l-mcu.init Normal file
View File

@ -0,0 +1,14 @@
#!/bin/sh /etc/rc.common
# Copyright (c) 2024 OpenWrt.org
START=99
USE_PROCD=1
PROG=/usr/bin/dns320l-mcu
start_service() {
procd_open_instance
procd_set_param command "$PROG"
procd_set_param respawn
procd_close_instance
}

4
target/linux/kirkwood/base-files/etc/board.d/02_network
View File

@ -19,6 +19,7 @@ kirkwood_setup_interfaces()
cloudengines,pogoe02|\
cloudengines,pogoplugv4|\
ctera,c200-v1|\
dlink,dns320l|\
globalscale,sheevaplug|\
iom,iconnect-1.1|\
iom,ix2-200|\
@ -60,6 +61,9 @@ kirkwood_setup_macs()
local label_mac=""
case "$board" in
dlink,dns320l)
lan_mac=$(mtd_get_mac_text "mini firmware")
;;
iptime,nas1)
lan_mac=$(mtd_get_mac_binary u-boot 0x3ffa8)
label_mac=$lan_mac

202
target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-dns320l.dts Normal file
View File

@ -0,0 +1,202 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Device Tree file for DLINK DNS-320L
*
* Copyright (C) 2024, Zoltan HERPAI <wigyori@uid0.hu>
* Copyright (C) 2015, Sunke Schlüters <sunke-dev@schlueters.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* This file is based on the works of:
* - Sunke Schlüters <sunke-dev@schlueters.de>
* - https://github.com/scus1/dns320l/blob/master/kernel/dts/kirkwood-dns320l.dts
* - Andreas Böhler <dev@aboehler.at>:
* - http://www.aboehler.at/doku/doku.php/projects:dns320l
* - http://www.aboehler.at/hg/linux-dns320l/file/ba7a60ad7687/linux-3.12/kirkwood-dns320l.dts
*/
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "D-Link DNS-320L";
compatible = "dlink,dns320l", "marvell,kirkwood-88f6702", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_buttons>;
pinctrl-names = "default";
button@1 {
label = "Reset push button";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 28 1>;
};
button@2 {
label = "USB unmount button";
linux,code = <KEY_EJECTCD>;
gpios = <&gpio0 27 1>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_leds>;
pinctrl-names = "default";
blue-usb {
label = "dns320l:usb:blue";
gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "usbport";
};
orange-usb {
label = "dns320l:usb:orange";
gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
};
orange-l-hdd {
label = "dns320l:orange:l_hdd";
gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
};
orange-r-hdd {
label = "dns320l:orange:r_hdd";
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
};
};
ocp@f1000000 {
sata@80000 {
status = "okay";
nr-ports = <2>;
};
serial@12000 {
status = "okay";
};
serial@12100 {
pinctrl-0 = <&pmx_uart1>;
pinctrl-names = "default";
status = "okay";
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_power_sata>;
pinctrl-names = "default";
sata_power: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "SATA Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 24 0>;
};
};
};
&nand {
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
chip-delay = <40>;
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
};
partition@100000 {
label = "ubootenv";
reg = <0x100000 0x20000>;
};
partition@120000 {
label = "ubi";
reg = <0x120000 0x6de0000>;
};
partition@6f00000 {
label = "mini firmware";
reg = <0x6f00000 0xa00000>;
};
partition@7900000 {
label = "config";
reg = <0x7900000 0x500000>;
};
partition@7e00000 {
label = "my-dlink";
reg = <0x7e00000 0x200000>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
&pinctrl {
pmx_sata1: pmx-sata1 {
marvell,pins = "mpp20";
marvell,function = "sata1";
};
pmx_sata0: pmx-sata0 {
marvell,pins = "mpp21";
marvell,function = "sata0";
};
pmx_power_sata: pmx-power-sata {
marvell,pins = "mpp24";
marvell,function = "gpio";
};
pmx_leds: pmx-leds {
marvell,pins = "mpp22", "mpp23", "mpp25", "mpp26";
marvell,function = "gpio";
};
pmx_buttons: pmx-buttons {
marvell,pins = "mpp27", "mpp28", "mpp29";
marvell,function = "gpio";
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};

202
target/linux/kirkwood/files-6.6/arch/arm/boot/dts/marvell/kirkwood-dns320l.dts Normal file
View File

@ -0,0 +1,202 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Device Tree file for DLINK DNS-320L
*
* Copyright (C) 2024, Zoltan HERPAI <wigyori@uid0.hu>
* Copyright (C) 2015, Sunke Schlüters <sunke-dev@schlueters.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* This file is based on the works of:
* - Sunke Schlüters <sunke-dev@schlueters.de>
* - https://github.com/scus1/dns320l/blob/master/kernel/dts/kirkwood-dns320l.dts
* - Andreas Böhler <dev@aboehler.at>:
* - http://www.aboehler.at/doku/doku.php/projects:dns320l
* - http://www.aboehler.at/hg/linux-dns320l/file/ba7a60ad7687/linux-3.12/kirkwood-dns320l.dts
*/
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "D-Link DNS-320L";
compatible = "dlink,dns320l", "marvell,kirkwood-88f6702", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_buttons>;
pinctrl-names = "default";
button@1 {
label = "Reset push button";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 28 1>;
};
button@2 {
label = "USB unmount button";
linux,code = <KEY_EJECTCD>;
gpios = <&gpio0 27 1>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_leds>;
pinctrl-names = "default";
blue-usb {
label = "dns320l:usb:blue";
gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "usbport";
};
orange-usb {
label = "dns320l:usb:orange";
gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
};
orange-l-hdd {
label = "dns320l:orange:l_hdd";
gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
};
orange-r-hdd {
label = "dns320l:orange:r_hdd";
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
};
};
ocp@f1000000 {
sata@80000 {
status = "okay";
nr-ports = <2>;
};
serial@12000 {
status = "okay";
};
serial@12100 {
pinctrl-0 = <&pmx_uart1>;
pinctrl-names = "default";
status = "okay";
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_power_sata>;
pinctrl-names = "default";
sata_power: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "SATA Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 24 0>;
};
};
};
&nand {
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
chip-delay = <40>;
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
};
partition@100000 {
label = "ubootenv";
reg = <0x100000 0x20000>;
};
partition@120000 {
label = "ubi";
reg = <0x120000 0x6de0000>;
};
partition@6f00000 {
label = "mini firmware";
reg = <0x6f00000 0xa00000>;
};
partition@7900000 {
label = "config";
reg = <0x7900000 0x500000>;
};
partition@7e00000 {
label = "my-dlink";
reg = <0x7e00000 0x200000>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
&pinctrl {
pmx_sata1: pmx-sata1 {
marvell,pins = "mpp20";
marvell,function = "sata1";
};
pmx_sata0: pmx-sata0 {
marvell,pins = "mpp21";
marvell,function = "sata0";
};
pmx_power_sata: pmx-power-sata {
marvell,pins = "mpp24";
marvell,function = "gpio";
};
pmx_leds: pmx-leds {
marvell,pins = "mpp22", "mpp23", "mpp25", "mpp26";
marvell,function = "gpio";
};
pmx_buttons: pmx-buttons {
marvell,pins = "mpp27", "mpp28", "mpp29";
marvell,function = "gpio";
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};

8
target/linux/kirkwood/image/Makefile
View File

@ -182,6 +182,14 @@ define Device/ctera_c200-v1
endef
TARGET_DEVICES += ctera_c200-v1
define Device/dlink_dns320l
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DNS-320L
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-gpio-button-hotplug \
kmod-usb-storage kmod-usb-ledtrig-usbport dns320l-mcu
endef
TARGET_DEVICES += dlink_dns320l
define Device/endian_4i-edge-200
DEVICE_VENDOR := Endian
DEVICE_MODEL := 4i Edge 200

35
target/linux/kirkwood/patches-6.1/118-dns-320l.patch Normal file
View File

@ -0,0 +1,35 @@
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -310,6 +310,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
kirkwood-db-88f6282.dtb \
kirkwood-dir665.dtb \
kirkwood-dns320.dtb \
+ kirkwood-dns320l.dtb \
kirkwood-dns325.dtb \
kirkwood-dockstar.dtb \
kirkwood-dreamplug.dtb \
--- a/arch/arm/boot/dts/kirkwood-dns320l.dts
+++ b/arch/arm/boot/dts/kirkwood-dns320l.dts
@@ -32,6 +32,13 @@
reg = <0x00000000 0x10000000>;
};
+ aliases {
+ led-boot = &led_orange_usb;
+ led-failsafe = &led_orange_usb;
+ led-running = &led_orange_usb;
+ led-upgrade = &led_orange_usb;
+ };
+
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
@@ -68,7 +75,7 @@
linux,default-trigger = "usbport";
};
- orange-usb {
+ led_orange_usb: orange-usb {
label = "dns320l:usb:orange";
gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
};

35
target/linux/kirkwood/patches-6.6/118-dns-320l.patch Normal file
View File

@ -0,0 +1,35 @@
--- a/arch/arm/boot/dts/marvell/Makefile
+++ b/arch/arm/boot/dts/marvell/Makefile
@@ -92,6 +92,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
kirkwood-db-88f6282.dtb \
kirkwood-dir665.dtb \
kirkwood-dns320.dtb \
+ kirkwood-dns320l.dtb \
kirkwood-dns325.dtb \
kirkwood-dockstar.dtb \
kirkwood-dreamplug.dtb \
--- a/arch/arm/boot/dts/marvell/kirkwood-dns320l.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-dns320l.dts
@@ -32,6 +32,13 @@
reg = <0x00000000 0x10000000>;
};
+ aliases {
+ led-boot = &led_orange_usb;
+ led-failsafe = &led_orange_usb;
+ led-running = &led_orange_usb;
+ led-upgrade = &led_orange_usb;
+ };
+
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
@@ -68,7 +75,7 @@
linux,default-trigger = "usbport";
};
- orange-usb {
+ led_orange_usb: orange-usb {
label = "dns320l:usb:orange";
gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
};