diff --git a/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network b/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network
index 93dadf491bb..bd77be3d41d 100644
--- a/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network
+++ b/target/linux/mvebu/cortexa72/base-files/etc/board.d/02_network
@@ -32,6 +32,9 @@ marvell,armada7040-db)
 marvell,armada8040-clearfog-gt-8k)
 	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 eth2" "eth0 eth1"
 	;;
+mikrotik,rb5009)
+	ucidef_set_interfaces_lan_wan "p2 p3 p4 p5 p6 p7 p8 sfp" "p1"
+	;;
 solidrun,clearfog-pro)
 	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5 lan6 eth0 eth1" "eth2"
 	;;
diff --git a/target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh
index c7f20a6d7c7..bb81b0ff26a 100755
--- a/target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mvebu/cortexa72/base-files/lib/upgrade/platform.sh
@@ -37,6 +37,9 @@ platform_do_upgrade() {
 	solidrun,clearfog-pro)
 		legacy_sdcard_do_upgrade "$1"
 		;;
+	mikrotik,rb5009)
+		nand_do_upgrade "$1"
+		;;
 	*)
 		default_do_upgrade "$1"
 		;;
diff --git a/target/linux/mvebu/cortexa72/config-6.6 b/target/linux/mvebu/cortexa72/config-6.6
index de2cec6f26b..19ca2b29d1b 100644
--- a/target/linux/mvebu/cortexa72/config-6.6
+++ b/target/linux/mvebu/cortexa72/config-6.6
@@ -102,6 +102,7 @@ CONFIG_QUEUED_SPINLOCKS=y
 CONFIG_RAS=y
 # CONFIG_RAVE_SP_CORE is not set
 CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_USERSPACE_CONSUMER=y
 # CONFIG_RODATA_FULL_DEFAULT_ENABLED is not set
 CONFIG_SENSORS_IEI_WT61P803_PUZZLE_HWMON=y
 CONFIG_SERIAL_DEV_BUS=y
diff --git a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-7040-rb5009.dts b/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-7040-rb5009.dts
new file mode 100644
index 00000000000..8cd744f64d5
--- /dev/null
+++ b/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-7040-rb5009.dts
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "armada-7040.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "MikroTik RB5009";
+	compatible = "mikrotik,rb5009", "marvell,armada7040",
+		     "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	aliases {
+		led-boot = &led_user;
+		led-failsafe = &led_user;
+		led-running = &led_user;
+		led-upgrade = &led_user;
+	};
+
+	usb3_vbus: regulator-usb3-vbus0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&cp0_gpio2 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_leds: regulator-leds {
+		compatible = "regulator-fixed";
+		regulator-name = "LED-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&cp0_gpio2 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	output-led-power {
+		compatible = "regulator-output";
+		vout-supply = <&reg_leds>;
+	};
+
+	sfp_i2c: sfp-i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&cp0_gpio1 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&cp0_gpio1 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&cp0_gpio1 28 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_user: user {
+			label = "green:user";
+			gpios = <&cp0_gpio2 26 GPIO_ACTIVE_LOW>;
+		};
+
+		sfp {
+			label = "green:sfp";
+			gpios = <&cp0_gpio2 25 GPIO_ACTIVE_LOW>;
+		};
+
+		hdr1 {
+			label = "blue:hdr1";
+			gpios = <&cp0_gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		hdr2 {
+			label = "blue:hdr2";
+			gpios = <&cp0_gpio2 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp_i2c>;
+		mod-def0-gpios = <&cp0_gpio1 11 GPIO_ACTIVE_LOW>;
+		los-gpios = <&cp0_gpio1 2 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp0_gpio1 6 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&cp0_gpio1 5 GPIO_ACTIVE_HIGH>;
+		rate-select0-gpios = <&cp0_gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				compatible = "mikrotik,routerboot-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				label = "MikroTik";
+				reg = <0x0 0xfe0000>;
+
+				hard_config: hard_config {
+					read-only;
+
+					nvmem-layout {
+						compatible = "mikrotik,routerboot-nvmem";
+
+						macaddr_hard: base-mac-address {
+							#nvmem-cell-cells = <1>;
+						};
+					};
+				};
+
+				soft_config {
+				};
+
+				dtb_config {
+					read-only;
+				};
+			};
+
+			partition@b0000 {
+				label = "RouterBOOT-primary";
+				reg = <0xb0000 0x10000>;
+			};
+
+			/* Empty space on NOR repurposed for U-Boot environment */
+			partition@fe0000 {
+				compatible = "u-boot,env";
+				label = "u-boot-env";
+				reg = <0xfe0000 0x20000>;
+			};
+		};
+	};
+};
+
+&cp0_nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		nand-rb = <0>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "YAFFS";
+				reg = <0x0 0x800000>;
+			};
+
+			partition@800000 {
+				label = "ubi";
+				reg = <0x800000 0x3f800000>;
+			};
+		};
+	};
+};
+
+&cp0_utmi {
+	status = "okay";
+};
+
+&cp0_comphy3 {
+	connector {
+		compatible = "usb-a-connector";
+		phy-supply = <&usb3_vbus>;
+	};
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	phys = <&cp0_comphy3 1>, <&cp0_utmi1>;
+	phy-names = "cp0-usb3h1-comphy", "utmi";
+	dr_mode = "host";
+};
+
+&cp0_i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&cp0_mdio {
+	status = "okay";
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+&cp0_eth0 {
+	/* This port is connected to 88E6393X switch */
+	status = "okay";
+	phy-mode = "10gbase-r";
+	phys = <&cp0_comphy2 0>;
+	managed = "in-band-status";
+	nvmem-cells = <&macaddr_hard 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&cp0_mdio {
+	status = "okay";
+
+	switch@0 {
+		/* Actual device is MV88E6393X */
+		compatible = "marvell,mv88e6190";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		/* LED config is lost if switch is reset */
+		//reset-gpios = <&cp0_gpio2 2 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "cpu";
+				ethernet = <&cp0_eth0>;
+				phy-mode = "10gbase-r";
+				managed = "in-band-status";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "p8";
+				phy-handle = <&switch0phy1>;
+				nvmem-cells = <&macaddr_hard 7>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "p7";
+				phy-handle = <&switch0phy2>;
+				nvmem-cells = <&macaddr_hard 6>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "p6";
+				phy-handle = <&switch0phy3>;
+				nvmem-cells = <&macaddr_hard 5>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "p5";
+				phy-handle = <&switch0phy4>;
+				nvmem-cells = <&macaddr_hard 4>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "p4";
+				phy-handle = <&switch0phy5>;
+				nvmem-cells = <&macaddr_hard 3>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "p3";
+				phy-handle = <&switch0phy6>;
+				nvmem-cells = <&macaddr_hard 2>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@7 {
+				reg = <7>;
+				label = "p2";
+				phy-handle = <&switch0phy7>;
+				nvmem-cells = <&macaddr_hard 1>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@9 {
+				reg = <9>;
+				label = "p1";
+				phy-mode = "sgmii";
+				phy-handle = <&qca8081>;
+				managed = "in-band-status";
+				nvmem-cells = <&macaddr_hard 0>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@a {
+				reg = <10>;
+				label = "sfp";
+				phy-mode = "10gbase-r";
+				managed = "in-band-status";
+				sfp = <&sfp>;
+				nvmem-cells = <&macaddr_hard 8>;
+				nvmem-cell-names = "mac-address";
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy1: switch0phy1@1 {
+				reg = <0x1>;
+			};
+
+			switch0phy2: switch0phy2@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy3: switch0phy3@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy4: switch0phy4@4 {
+				reg = <0x4>;
+			};
+
+			switch0phy5: switch0phy5@5 {
+				reg = <0x5>;
+			};
+
+			switch0phy6: switch0phy6@6 {
+				reg = <0x6>;
+			};
+
+			switch0phy7: switch0phy7@7 {
+				reg = <0x7>;
+			};
+		};
+
+		mdio1 {
+			compatible = "marvell,mv88e6xxx-mdio-external";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			qca8081: qca8081@0 {
+				reg = <0>;
+			};
+		};
+	};
+};
diff --git a/target/linux/mvebu/image/cortexa72.mk b/target/linux/mvebu/image/cortexa72.mk
index 17904dc6c34..48919b7f710 100644
--- a/target/linux/mvebu/image/cortexa72.mk
+++ b/target/linux/mvebu/image/cortexa72.mk
@@ -1,3 +1,16 @@
+define Device/FitImage
+  KERNEL_SUFFIX := -uImage.itb
+  KERNEL = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
+  KERNEL_NAME := Image
+endef
+
+define Device/UbiFit
+  KERNEL_IN_UBI := 1
+  IMAGES := factory.ubi sysupgrade.bin
+  IMAGE/factory.ubi := append-ubi
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+
 define Device/globalscale_mochabin
   $(call Device/Default-arm64)
   DEVICE_VENDOR := Globalscale
@@ -52,6 +65,19 @@ define Device/marvell_macchiatobin-singleshot
 endef
 TARGET_DEVICES += marvell_macchiatobin-singleshot
 
+define Device/mikrotik_rb5009
+  $(call Device/Default-arm64)
+  $(Device/NAND-128K)
+  $(call Device/FitImage)
+  $(call Device/UbiFit)
+  DEVICE_VENDOR := MikroTik
+  DEVICE_MODEL := RB5009
+  SOC := armada-7040
+  KERNEL_LOADADDR := 0x22000000
+  DEVICE_PACKAGES += kmod-i2c-gpio yafut
+endef
+TARGET_DEVICES += mikrotik_rb5009
+
 define Device/marvell_clearfog-gt-8k
   $(call Device/Default-arm64)
   DEVICE_VENDOR := SolidRun