ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-19 05:38:00 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity

ramips: add support for Beeline SmartBox TURBO

Browse Source 
Beeline SmartBox TURBO is a wireless WiFi 5 router manufactured by
Sercomm company.

Device specification
--------------------
SoC Type: MediaTek MT7621AT
RAM: 256 MiB
Flash: 256 MiB, Micron MT29F2G08ABAGA3W
Wireless 2.4 GHz (MT7603EN): b/g/n, 2x2
Wireless 5 GHz (MT7615E): a/n/ac, 4x4
Ethernet: 5xGbE (WAN, LAN1, LAN2, LAN3, LAN4)
USB ports: 1xUSB3.0
Button: 2 buttons (Reset & WPS)
LEDs: 1 RGB LED
Power: 12 VDC, 1.5 A
Connector type: barrel
Bootloader: U-Boot

Installation
-----------------
1.  Login to the router web interface (admin:admin)
2.  Navigate to Settings -> WAN -> Add static IP interface (e.g.
    10.0.0.1/255.255.255.0)
3.  Navigate to Settings -> Remote cotrol -> Add SSH, port 22,
    10.0.0.0/255.255.255.0 and interface created before
4.  Change IP of your client to 10.0.0.2/255.255.255.0 and connect the
    ethernet cable to the WAN port of the router
5.  Connect to the router using SSH shell (SuperUser:SNxxxxxxxxxx, where
    SNxxxxxxxxxx is the serial number from the backplate label)
6.  Run in SSH shell:
       sh
7.  Make a mtd backup (optional, see related section)
8.  Change bootflag to Sercomm1 and reboot:
       printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3
       reboot
9.  Login to the router web interface (admin:admin)
10. Remove dots from the OpenWrt factory image filename
11. Update firmware via web using OpenWrt factory image

Revert to stock
---------------
1. Change bootflag to Sercomm1 in OpenWrt CLI and then reboot:
      printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3
2. Optional: Update with any stock (Beeline) firmware if you want to
   overwrite OpenWrt in Slot 0 completely.

mtd backup
----------
1. Set up a tftp server (e.g. tftpd64 for windows)
2. Connect to a router using SSH shell and run the following commands:
      cd /tmp
      for i in 0 1 2 3 4 5 6 7 8 9 10; do nanddump -f mtd$i /dev/mtd$i; \
      tftp -l mtd$i -p 10.0.0.2; md5sum mtd$i >> mtd.md5; rm mtd$i; done
      tftp -l mtd.md5 -p 10.0.0.2

MAC Addresses
-------------
+-----+-----------+---------+
| use | address   | example |
+-----+-----------+---------+
| LAN | label     | *:54    |
| WAN | label + 1 | *:55    |
| 2g  | label + 4 | *:58    |
| 5g  | label + 5 | *:59    |
+-----+-----------+---------+
The label MAC address was found in Factory 0x21000

Co-developed-by: Maximilian Weinmann <x1@disroot.org>
Signed-off-by: Maximilian Weinmann <x1@disroot.org>
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
This commit is contained in:
Mikhail Zhilkin 2022-03-18 18:09:45 +00:00 committed by Hauke Mehrtens
parent 6d5873a162
commit 85b41cbd3b
6 changed files with 270 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
package/boot/uboot-envtools/files/ramips
View File

@ -31,7 +31,8 @@ ampedwireless,ally-00x19k|\
ampedwireless,ally-r1900k)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000" "4"
;;
beeline,smartbox-giga)
beeline,smartbox-giga|\
beeline,smartbox-turbo)
ubootenv_add_uci_config "/dev/mtd0" "0x80000" "0x1000" "0x20000"
;;
buffalo,wsr-1166dhp|\

247
target/linux/ramips/dts/mt7621_beeline_smartbox-turbo.dts Normal file
View File

@ -0,0 +1,247 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "beeline,smartbox-turbo", "mediatek,mt7621-soc";
model = "Beeline SmartBox TURBO";
aliases {
label-mac-device = &gmac0;
led-boot = &led_status_green;
led-failsafe = &led_status_red;
led-running = &led_status_green;
led-upgrade = &led_status_red;
};
leds {
compatible = "gpio-leds";
led-1 {
label = "blue:wan";
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WAN;
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
led_status_green: led-0 {
label = "green:status";
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
};
led_status_red: led-2 {
label = "red:status";
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
wps {
label = "wps";
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
ubi-concat {
compatible = "mtd-concat";
devices = <&ubiconcat0 &ubiconcat1 &ubiconcat2 \
&ubiconcat3>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "ubi";
reg = <0x0 0xca00000>;
};
};
};
};
&nand {
status = "okay";
partitions {
compatible = "sercomm,sc-partitions", "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x100000>;
sercomm,scpart-id = <0>;
read-only;
};
partition@100000 {
label = "dynamic partition map";
reg = <0x100000 0x100000>;
sercomm,scpart-id = <1>;
read-only;
};
factory: partition@200000 {
label = "Factory";
reg = <0x200000 0x100000>;
sercomm,scpart-id = <2>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_21000: macaddr@21000 {
reg = <0x21000 0x6>;
};
};
partition@300000 {
label = "Boot Flag";
reg = <0x300000 0x100000>;
sercomm,scpart-id = <3>;
};
partition@400000 {
label = "kernel";
reg = <0x400000 0x600000>;
sercomm,scpart-id = <4>;
};
partition@a00000 {
label = "Kernel 2";
reg = <0xa00000 0x600000>;
sercomm,scpart-id = <5>;
read-only;
};
ubiconcat0: partition@1000000 {
label = "File System 1";
reg = <0x1000000 0x2000000>;
sercomm,scpart-id = <6>;
};
partition@3000000 {
label = "File System 2";
reg = <0x3000000 0x2000000>;
sercomm,scpart-id = <7>;
read-only;
};
ubiconcat1: partition@5000000 {
label = "Configuration/log";
reg = <0x5000000 0x1400000>;
sercomm,scpart-id = <8>;
};
ubiconcat2: partition@6400000 {
label = "Debug (Ftool)";
reg = <0x6400000 0x1a00000>;
sercomm,scpart-id = <9>;
};
ubiconcat3: partition@8000000 {
label = "container";
reg = <0x8000000 0x7c00000>;
sercomm,scpart-id = <10>;
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
nvmem-cells = <&macaddr_factory_21000>;
nvmem-cell-names = "mac-address";
mac-address-increment = <(5)>;
};
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0>;
ieee80211-freq-limit = <2400000 2500000>;
nvmem-cells = <&macaddr_factory_21000>;
nvmem-cell-names = "mac-address";
mac-address-increment = <(4)>;
};
};
&gmac0 {
nvmem-cells = <&macaddr_factory_21000>;
nvmem-cell-names = "mac-address";
};
&switch0 {
ports {
port@0 {
status = "okay";
label = "wan";
nvmem-cells = <&macaddr_factory_21000>;
nvmem-cell-names = "mac-address";
mac-address-increment = <(1)>;
};
port@1 {
status = "okay";
label = "lan1";
};
port@2 {
status = "okay";
label = "lan2";
};
port@3 {
status = "okay";
label = "lan3";
};
port@4 {
status = "okay";
label = "lan4";
};
};
};
&uartlite3 {
status = "okay";
};
&state_default {
gpio {
groups = "jtag", "uart2";
function = "gpio";
};
};

13
target/linux/ramips/image/mt7621.mk
View File

@ -328,6 +328,19 @@ define Device/beeline_smartbox-giga
endef
TARGET_DEVICES += beeline_smartbox-giga
define Device/beeline_smartbox-turbo
$(Device/sercomm_dxx)
IMAGE_SIZE := 32768k
SERCOMM_HWID := DF3
SERCOMM_HWVER := 10200
SERCOMM_SWVER := 1004
DEVICE_VENDOR := Beeline
DEVICE_MODEL := SmartBox TURBO
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware \
kmod-usb3 uboot-envtools
endef
TARGET_DEVICES += beeline_smartbox-turbo
define Device/buffalo_wsr-1166dhp
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)

3
target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
View File

@ -24,7 +24,8 @@ asus,rt-n56u-b1)
ucidef_set_led_netdev "wan" "WAN link" "blue:wan" "wan"
;;
beeline,smartbox-flash|\
beeline,smartbox-giga)
beeline,smartbox-giga|\
beeline,smartbox-turbo)
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
;;
cudy,wr2100)

5
target/linux/ramips/mt7621/base-files/etc/init.d/bootcount
View File

@ -8,6 +8,11 @@ boot() {
[ -n "$(fw_printenv bootcount bootchanged 2>/dev/null)" ] &&\
echo -e "bootcount\nbootchanged\n" | /usr/sbin/fw_setenv -s -
;;
beeline,smartbox-turbo)
[[ $(hexdump -n 1 -e '/1 "%1d"' -s $((0x20001)) /dev/mtd3) == \
$((0xff)) ]] || printf '\xff' | dd of=/dev/mtdblock3 \
count=1 bs=1 seek=$((0x20001))
;;
linksys,e5600|\
linksys,ea6350-v4|\
linksys,ea7300-v1|\

1
target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
View File

@ -56,6 +56,7 @@ platform_do_upgrade() {
asus,rt-ax53u|\
beeline,smartbox-flash|\
beeline,smartbox-giga|\
beeline,smartbox-turbo|\
dlink,dir-1960-a1|\
dlink,dir-2640-a1|\
dlink,dir-2660-a1|\