mac80211: backport brcmfmac to support multiple devices NVRAM

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45577
This commit is contained in:
Rafał Miłecki 2015-04-24 10:53:11 +00:00
parent c1a7e13587
commit 84a3e668fc
10 changed files with 1000 additions and 0 deletions

View File

@ -0,0 +1,300 @@
From: Arend van Spriel <arend@broadcom.com>
Date: Tue, 14 Apr 2015 20:10:24 +0200
Subject: [PATCH] brcmfmac: use static superset of channels for wiphy
bands
The driver was constructing a list of channels per wiphy band
by querying the device. This list is not what the hardware is
able to do as it is already filtered by the country setting in
the device. As user-space may change the country this would
require updating the channel list which is not recommended [1].
This patch introduces a superset of channels. The individual
channels are disabled appropriately by querying the device.
[1] http://mid.gmane.org/1426706320.3001.21.camel@sipsolutions.net
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
--- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
@@ -129,13 +129,47 @@ static struct ieee80211_rate __wl_rates[
RATETAB_ENT(BRCM_RATE_54M, 0),
};
-#define wl_a_rates (__wl_rates + 4)
-#define wl_a_rates_size 8
#define wl_g_rates (__wl_rates + 0)
-#define wl_g_rates_size 12
+#define wl_g_rates_size ARRAY_SIZE(__wl_rates)
+#define wl_a_rates (__wl_rates + 4)
+#define wl_a_rates_size (wl_g_rates_size - 4)
+
+#define CHAN2G(_channel, _freq) { \
+ .band = IEEE80211_BAND_2GHZ, \
+ .center_freq = (_freq), \
+ .hw_value = (_channel), \
+ .flags = IEEE80211_CHAN_DISABLED, \
+ .max_antenna_gain = 0, \
+ .max_power = 30, \
+}
+
+#define CHAN5G(_channel) { \
+ .band = IEEE80211_BAND_5GHZ, \
+ .center_freq = 5000 + (5 * (_channel)), \
+ .hw_value = (_channel), \
+ .flags = IEEE80211_CHAN_DISABLED, \
+ .max_antenna_gain = 0, \
+ .max_power = 30, \
+}
+
+static struct ieee80211_channel __wl_2ghz_channels[] = {
+ CHAN2G(1, 2412), CHAN2G(2, 2417), CHAN2G(3, 2422), CHAN2G(4, 2427),
+ CHAN2G(5, 2432), CHAN2G(6, 2437), CHAN2G(7, 2442), CHAN2G(8, 2447),
+ CHAN2G(9, 2452), CHAN2G(10, 2457), CHAN2G(11, 2462), CHAN2G(12, 2467),
+ CHAN2G(13, 2472), CHAN2G(14, 2484)
+};
+
+static struct ieee80211_channel __wl_5ghz_channels[] = {
+ CHAN5G(34), CHAN5G(36), CHAN5G(38), CHAN5G(40), CHAN5G(42),
+ CHAN5G(44), CHAN5G(46), CHAN5G(48), CHAN5G(52), CHAN5G(56),
+ CHAN5G(60), CHAN5G(64), CHAN5G(100), CHAN5G(104), CHAN5G(108),
+ CHAN5G(112), CHAN5G(116), CHAN5G(120), CHAN5G(124), CHAN5G(128),
+ CHAN5G(132), CHAN5G(136), CHAN5G(140), CHAN5G(144), CHAN5G(149),
+ CHAN5G(153), CHAN5G(157), CHAN5G(161), CHAN5G(165)
+};
/* Band templates duplicated per wiphy. The channel info
- * is filled in after querying the device.
+ * above is added to the band during setup.
*/
static const struct ieee80211_supported_band __wl_band_2ghz = {
.band = IEEE80211_BAND_2GHZ,
@@ -143,7 +177,7 @@ static const struct ieee80211_supported_
.n_bitrates = wl_g_rates_size,
};
-static const struct ieee80211_supported_band __wl_band_5ghz_a = {
+static const struct ieee80211_supported_band __wl_band_5ghz = {
.band = IEEE80211_BAND_5GHZ,
.bitrates = wl_a_rates,
.n_bitrates = wl_a_rates_size,
@@ -5252,40 +5286,6 @@ dongle_scantime_out:
return err;
}
-/* Filter the list of channels received from firmware counting only
- * the 20MHz channels. The wiphy band data only needs those which get
- * flagged to indicate if they can take part in higher bandwidth.
- */
-static void brcmf_count_20mhz_channels(struct brcmf_cfg80211_info *cfg,
- struct brcmf_chanspec_list *chlist,
- u32 chcnt[])
-{
- u32 total = le32_to_cpu(chlist->count);
- struct brcmu_chan ch;
- int i;
-
- for (i = 0; i < total; i++) {
- ch.chspec = (u16)le32_to_cpu(chlist->element[i]);
- cfg->d11inf.decchspec(&ch);
-
- /* Firmware gives a ordered list. We skip non-20MHz
- * channels is 2G. For 5G we can abort upon reaching
- * a non-20MHz channel in the list.
- */
- if (ch.bw != BRCMU_CHAN_BW_20) {
- if (ch.band == BRCMU_CHAN_BAND_5G)
- break;
- else
- continue;
- }
-
- if (ch.band == BRCMU_CHAN_BAND_2G)
- chcnt[0] += 1;
- else if (ch.band == BRCMU_CHAN_BAND_5G)
- chcnt[1] += 1;
- }
-}
-
static void brcmf_update_bw40_channel_flag(struct ieee80211_channel *channel,
struct brcmu_chan *ch)
{
@@ -5321,7 +5321,6 @@ static int brcmf_construct_chaninfo(stru
u32 i, j;
u32 total;
u32 chaninfo;
- u32 chcnt[2] = { 0, 0 };
u32 index;
pbuf = kzalloc(BRCMF_DCMD_MEDLEN, GFP_KERNEL);
@@ -5338,42 +5337,15 @@ static int brcmf_construct_chaninfo(stru
goto fail_pbuf;
}
- brcmf_count_20mhz_channels(cfg, list, chcnt);
wiphy = cfg_to_wiphy(cfg);
- if (chcnt[0]) {
- band = kmemdup(&__wl_band_2ghz, sizeof(__wl_band_2ghz),
- GFP_KERNEL);
- if (band == NULL) {
- err = -ENOMEM;
- goto fail_pbuf;
- }
- band->channels = kcalloc(chcnt[0], sizeof(*channel),
- GFP_KERNEL);
- if (band->channels == NULL) {
- kfree(band);
- err = -ENOMEM;
- goto fail_pbuf;
- }
- band->n_channels = 0;
- wiphy->bands[IEEE80211_BAND_2GHZ] = band;
- }
- if (chcnt[1]) {
- band = kmemdup(&__wl_band_5ghz_a, sizeof(__wl_band_5ghz_a),
- GFP_KERNEL);
- if (band == NULL) {
- err = -ENOMEM;
- goto fail_band2g;
- }
- band->channels = kcalloc(chcnt[1], sizeof(*channel),
- GFP_KERNEL);
- if (band->channels == NULL) {
- kfree(band);
- err = -ENOMEM;
- goto fail_band2g;
- }
- band->n_channels = 0;
- wiphy->bands[IEEE80211_BAND_5GHZ] = band;
- }
+ band = wiphy->bands[IEEE80211_BAND_2GHZ];
+ if (band)
+ for (i = 0; i < band->n_channels; i++)
+ band->channels[i].flags = IEEE80211_CHAN_DISABLED;
+ band = wiphy->bands[IEEE80211_BAND_5GHZ];
+ if (band)
+ for (i = 0; i < band->n_channels; i++)
+ band->channels[i].flags = IEEE80211_CHAN_DISABLED;
total = le32_to_cpu(list->count);
for (i = 0; i < total; i++) {
@@ -5388,6 +5360,8 @@ static int brcmf_construct_chaninfo(stru
brcmf_err("Invalid channel Spec. 0x%x.\n", ch.chspec);
continue;
}
+ if (!band)
+ continue;
if (!(bw_cap[band->band] & WLC_BW_40MHZ_BIT) &&
ch.bw == BRCMU_CHAN_BW_40)
continue;
@@ -5415,9 +5389,9 @@ static int brcmf_construct_chaninfo(stru
} else if (ch.bw == BRCMU_CHAN_BW_40) {
brcmf_update_bw40_channel_flag(&channel[index], &ch);
} else {
- /* disable other bandwidths for now as mentioned
- * order assure they are enabled for subsequent
- * chanspecs.
+ /* enable the channel and disable other bandwidths
+ * for now as mentioned order assure they are enabled
+ * for subsequent chanspecs.
*/
channel[index].flags = IEEE80211_CHAN_NO_HT40 |
IEEE80211_CHAN_NO_80MHZ;
@@ -5436,16 +5410,8 @@ static int brcmf_construct_chaninfo(stru
IEEE80211_CHAN_NO_IR;
}
}
- if (index == band->n_channels)
- band->n_channels++;
}
- kfree(pbuf);
- return 0;
-fail_band2g:
- kfree(wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
- kfree(wiphy->bands[IEEE80211_BAND_2GHZ]);
- wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
fail_pbuf:
kfree(pbuf);
return err;
@@ -5778,7 +5744,12 @@ static void brcmf_wiphy_wowl_params(stru
static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp)
{
+ struct ieee80211_supported_band *band;
struct ieee80211_iface_combination ifc_combo;
+ __le32 bandlist[3];
+ u32 n_bands;
+ int err, i;
+
wiphy->max_scan_ssids = WL_NUM_SCAN_MAX;
wiphy->max_scan_ie_len = BRCMF_SCAN_IE_LEN_MAX;
wiphy->max_num_pmkids = WL_NUM_PMKIDS_MAX;
@@ -5820,7 +5791,52 @@ static int brcmf_setup_wiphy(struct wiph
if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_WOWL))
brcmf_wiphy_wowl_params(wiphy);
- return brcmf_setup_wiphybands(wiphy);
+ err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BANDLIST, &bandlist,
+ sizeof(bandlist));
+ if (err) {
+ brcmf_err("could not obtain band info: err=%d\n", err);
+ return err;
+ }
+ /* first entry in bandlist is number of bands */
+ n_bands = le32_to_cpu(bandlist[0]);
+ for (i = 1; i <= n_bands && i < ARRAY_SIZE(bandlist); i++) {
+ if (bandlist[i] == cpu_to_le32(WLC_BAND_2G)) {
+ band = kmemdup(&__wl_band_2ghz, sizeof(__wl_band_2ghz),
+ GFP_KERNEL);
+ if (!band)
+ return -ENOMEM;
+
+ band->channels = kmemdup(&__wl_2ghz_channels,
+ sizeof(__wl_2ghz_channels),
+ GFP_KERNEL);
+ if (!band->channels) {
+ kfree(band);
+ return -ENOMEM;
+ }
+
+ band->n_channels = ARRAY_SIZE(__wl_2ghz_channels);
+ wiphy->bands[IEEE80211_BAND_2GHZ] = band;
+ }
+ if (bandlist[i] == cpu_to_le32(WLC_BAND_5G)) {
+ band = kmemdup(&__wl_band_5ghz, sizeof(__wl_band_5ghz),
+ GFP_KERNEL);
+ if (!band)
+ return -ENOMEM;
+
+ band->channels = kmemdup(&__wl_5ghz_channels,
+ sizeof(__wl_5ghz_channels),
+ GFP_KERNEL);
+ if (!band->channels) {
+ kfree(band);
+ return -ENOMEM;
+ }
+
+ band->n_channels = ARRAY_SIZE(__wl_5ghz_channels);
+ wiphy->bands[IEEE80211_BAND_5GHZ] = band;
+ }
+ }
+ err = brcmf_setup_wiphybands(wiphy);
+ return err;
}
static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg)
@@ -6011,6 +6027,9 @@ static void brcmf_cfg80211_reg_notifier(
static void brcmf_free_wiphy(struct wiphy *wiphy)
{
+ if (!wiphy)
+ return;
+
kfree(wiphy->iface_combinations);
if (wiphy->bands[IEEE80211_BAND_2GHZ]) {
kfree(wiphy->bands[IEEE80211_BAND_2GHZ]->channels);

View File

@ -0,0 +1,29 @@
From: Arend van Spriel <arend@broadcom.com>
Date: Tue, 14 Apr 2015 20:10:25 +0200
Subject: [PATCH] brcmfmac: update wiphy band information upon updating
regulatory domain
When change the country code the available channels may change. So
the wiphy bands should be updated accordingly.
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
--- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
@@ -6022,7 +6022,11 @@ static void brcmf_cfg80211_reg_notifier(
memset(&ccreq, 0, sizeof(ccreq));
ccreq.rev = cpu_to_le32(-1);
memcpy(ccreq.ccode, req->alpha2, sizeof(req->alpha2));
- brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq));
+ if (brcmf_fil_iovar_data_set(ifp, "country", &ccreq, sizeof(ccreq))) {
+ brcmf_err("firmware rejected country setting\n");
+ return;
+ }
+ brcmf_setup_wiphybands(wiphy);
}
static void brcmf_free_wiphy(struct wiphy *wiphy)

View File

@ -0,0 +1,24 @@
From: Arend van Spriel <arend@broadcom.com>
Date: Tue, 14 Apr 2015 20:10:26 +0200
Subject: [PATCH] brcmfmac: add description for feature flags
Some feature flags were not described in the header file. Adding
the description.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
--- a/drivers/net/wireless/brcm80211/brcmfmac/feature.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.h
@@ -19,7 +19,9 @@
/*
* Features:
*
+ * MBSS: multiple BSSID support (eg. guest network in AP mode).
* MCHAN: multi-channel for concurrent P2P.
+ * WOWL: Wake-On-WLAN.
*/
#define BRCMF_FEAT_LIST \
BRCMF_FEAT_DEF(MBSS) \

View File

@ -0,0 +1,51 @@
From: Arend van Spriel <arend@broadcom.com>
Date: Tue, 14 Apr 2015 20:10:27 +0200
Subject: [PATCH] brcmfmac: make scheduled scan support conditional
The scheduled scan support depends on firmware supporting the PNO
feature. This feature is optional so add a feature flag for this
in the driver and announce scheduled scan support accordingly.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
--- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
@@ -5782,7 +5782,8 @@ static int brcmf_setup_wiphy(struct wiph
wiphy->flags |= WIPHY_FLAG_SUPPORTS_FW_ROAM;
wiphy->mgmt_stypes = brcmf_txrx_stypes;
wiphy->max_remain_on_channel_duration = 5000;
- brcmf_wiphy_pno_params(wiphy);
+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_PNO))
+ brcmf_wiphy_pno_params(wiphy);
/* vendor commands/events support */
wiphy->vendor_commands = brcmf_vendor_cmds;
--- a/drivers/net/wireless/brcm80211/brcmfmac/feature.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.c
@@ -124,6 +124,7 @@ void brcmf_feat_attach(struct brcmf_pub
struct brcmf_if *ifp = drvr->iflist[0];
brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MCHAN, "mchan");
+ brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_PNO, "pfn");
if (drvr->bus_if->wowl_supported)
brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_WOWL, "wowl");
if (drvr->bus_if->chip != BRCM_CC_43362_CHIP_ID)
--- a/drivers/net/wireless/brcm80211/brcmfmac/feature.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/feature.h
@@ -21,11 +21,13 @@
*
* MBSS: multiple BSSID support (eg. guest network in AP mode).
* MCHAN: multi-channel for concurrent P2P.
+ * PNO: preferred network offload.
* WOWL: Wake-On-WLAN.
*/
#define BRCMF_FEAT_LIST \
BRCMF_FEAT_DEF(MBSS) \
BRCMF_FEAT_DEF(MCHAN) \
+ BRCMF_FEAT_DEF(PNO) \
BRCMF_FEAT_DEF(WOWL)
/*
* Quirks:

View File

@ -0,0 +1,43 @@
From: Arend van Spriel <arend@broadcom.com>
Date: Tue, 14 Apr 2015 20:10:28 +0200
Subject: [PATCH] brcmfmac: add support for BCM4324 rev B5 chipset
This patch adds support for the BCM4324 B5 revision. This device
is similar to BCM43241 from driver and firmware perspective. It
is known to be used in Lenovo Thinkpad Tablet devices.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
@@ -601,6 +601,8 @@ static const struct sdiod_drive_str sdio
#define BCM43241B0_NVRAM_NAME "brcm/brcmfmac43241b0-sdio.txt"
#define BCM43241B4_FIRMWARE_NAME "brcm/brcmfmac43241b4-sdio.bin"
#define BCM43241B4_NVRAM_NAME "brcm/brcmfmac43241b4-sdio.txt"
+#define BCM43241B5_FIRMWARE_NAME "brcm/brcmfmac43241b5-sdio.bin"
+#define BCM43241B5_NVRAM_NAME "brcm/brcmfmac43241b5-sdio.txt"
#define BCM4329_FIRMWARE_NAME "brcm/brcmfmac4329-sdio.bin"
#define BCM4329_NVRAM_NAME "brcm/brcmfmac4329-sdio.txt"
#define BCM4330_FIRMWARE_NAME "brcm/brcmfmac4330-sdio.bin"
@@ -628,6 +630,8 @@ MODULE_FIRMWARE(BCM43241B0_FIRMWARE_NAME
MODULE_FIRMWARE(BCM43241B0_NVRAM_NAME);
MODULE_FIRMWARE(BCM43241B4_FIRMWARE_NAME);
MODULE_FIRMWARE(BCM43241B4_NVRAM_NAME);
+MODULE_FIRMWARE(BCM43241B5_FIRMWARE_NAME);
+MODULE_FIRMWARE(BCM43241B5_NVRAM_NAME);
MODULE_FIRMWARE(BCM4329_FIRMWARE_NAME);
MODULE_FIRMWARE(BCM4329_NVRAM_NAME);
MODULE_FIRMWARE(BCM4330_FIRMWARE_NAME);
@@ -667,7 +671,8 @@ enum brcmf_firmware_type {
static const struct brcmf_firmware_names brcmf_fwname_data[] = {
{ BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43143) },
{ BRCM_CC_43241_CHIP_ID, 0x0000001F, BRCMF_FIRMWARE_NVRAM(BCM43241B0) },
- { BRCM_CC_43241_CHIP_ID, 0xFFFFFFE0, BRCMF_FIRMWARE_NVRAM(BCM43241B4) },
+ { BRCM_CC_43241_CHIP_ID, 0x00000020, BRCMF_FIRMWARE_NVRAM(BCM43241B4) },
+ { BRCM_CC_43241_CHIP_ID, 0xFFFFFFC0, BRCMF_FIRMWARE_NVRAM(BCM43241B5) },
{ BRCM_CC_4329_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4329) },
{ BRCM_CC_4330_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4330) },
{ BRCM_CC_4334_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4334) },

View File

@ -0,0 +1,27 @@
From: Arend van Spriel <arend@broadcom.com>
Date: Tue, 14 Apr 2015 20:10:29 +0200
Subject: [PATCH] brcmfmac: process interrupt regardless sdiod state
When the sdio bus state is not ready to process we abort the
interrupt service routine. This is not wanted as it keeps the
interrupt source active. Better clear the interrupt source.
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
@@ -3555,10 +3555,6 @@ void brcmf_sdio_isr(struct brcmf_sdio *b
return;
}
- if (bus->sdiodev->state != BRCMF_SDIOD_DATA) {
- brcmf_err("bus is down. we have nothing to do\n");
- return;
- }
/* Count the interrupt call */
bus->sdcnt.intrcount++;
if (in_interrupt())

View File

@ -0,0 +1,68 @@
From: Arend van Spriel <arend@broadcom.com>
Date: Tue, 14 Apr 2015 20:10:30 +0200
Subject: [PATCH] brcmfmac: fix sdio suspend and resume
commit 330b4e4be937 ("brcmfmac: Add wowl support for SDIO devices.")
changed the behaviour by removing the MMC_PM_KEEP_POWER flag for
non-wowl scenario, which needs to be restored. Another necessary
change is to mark the card as being non-removable. With this in place
the suspend resume test passes successfully doing:
# echo devices > /sys/power/pm_test
# echo mem > /sys/power/state
Note that power may still be switched off when system is going
in S3 state.
Reported-by: Fu, Zhonghui <<zhonghui.fu@linux.intel.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -1011,6 +1011,14 @@ static int brcmf_sdiod_remove(struct brc
return 0;
}
+static void brcmf_sdiod_host_fixup(struct mmc_host *host)
+{
+ /* runtime-pm powers off the device */
+ pm_runtime_forbid(host->parent);
+ /* avoid removal detection upon resume */
+ host->caps |= MMC_CAP_NONREMOVABLE;
+}
+
static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
{
struct sdio_func *func;
@@ -1076,7 +1084,7 @@ static int brcmf_sdiod_probe(struct brcm
ret = -ENODEV;
goto out;
}
- pm_runtime_forbid(host->parent);
+ brcmf_sdiod_host_fixup(host);
out:
if (ret)
brcmf_sdiod_remove(sdiodev);
@@ -1246,15 +1254,15 @@ static int brcmf_ops_sdio_suspend(struct
brcmf_sdiod_freezer_on(sdiodev);
brcmf_sdio_wd_timer(sdiodev->bus, 0);
+ sdio_flags = MMC_PM_KEEP_POWER;
if (sdiodev->wowl_enabled) {
- sdio_flags = MMC_PM_KEEP_POWER;
if (sdiodev->pdata->oob_irq_supported)
enable_irq_wake(sdiodev->pdata->oob_irq_nr);
else
- sdio_flags = MMC_PM_WAKE_SDIO_IRQ;
- if (sdio_set_host_pm_flags(sdiodev->func[1], sdio_flags))
- brcmf_err("Failed to set pm_flags %x\n", sdio_flags);
+ sdio_flags |= MMC_PM_WAKE_SDIO_IRQ;
}
+ if (sdio_set_host_pm_flags(sdiodev->func[1], sdio_flags))
+ brcmf_err("Failed to set pm_flags %x\n", sdio_flags);
return 0;
}

View File

@ -0,0 +1,77 @@
From: Arend van Spriel <arend@broadcom.com>
Date: Tue, 14 Apr 2015 20:10:31 +0200
Subject: [PATCH] brcmfmac: add support for BCM4358 PCIe device
This patch adds support for the BCM4358 2x2 11ac device.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
--- a/drivers/net/wireless/brcm80211/brcmfmac/chip.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/chip.c
@@ -649,6 +649,7 @@ static u32 brcmf_chip_tcm_rambase(struct
case BRCM_CC_43567_CHIP_ID:
case BRCM_CC_43569_CHIP_ID:
case BRCM_CC_43570_CHIP_ID:
+ case BRCM_CC_4358_CHIP_ID:
case BRCM_CC_43602_CHIP_ID:
return 0x180000;
default:
--- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
@@ -51,6 +51,8 @@ enum brcmf_pcie_state {
#define BRCMF_PCIE_4356_NVRAM_NAME "brcm/brcmfmac4356-pcie.txt"
#define BRCMF_PCIE_43570_FW_NAME "brcm/brcmfmac43570-pcie.bin"
#define BRCMF_PCIE_43570_NVRAM_NAME "brcm/brcmfmac43570-pcie.txt"
+#define BRCMF_PCIE_4358_FW_NAME "brcm/brcmfmac4358-pcie.bin"
+#define BRCMF_PCIE_4358_NVRAM_NAME "brcm/brcmfmac4358-pcie.txt"
#define BRCMF_PCIE_FW_UP_TIMEOUT 2000 /* msec */
@@ -189,6 +191,8 @@ MODULE_FIRMWARE(BRCMF_PCIE_4356_FW_NAME)
MODULE_FIRMWARE(BRCMF_PCIE_4356_NVRAM_NAME);
MODULE_FIRMWARE(BRCMF_PCIE_43570_FW_NAME);
MODULE_FIRMWARE(BRCMF_PCIE_43570_NVRAM_NAME);
+MODULE_FIRMWARE(BRCMF_PCIE_4358_FW_NAME);
+MODULE_FIRMWARE(BRCMF_PCIE_4358_NVRAM_NAME);
struct brcmf_pcie_console {
@@ -1333,6 +1337,10 @@ static int brcmf_pcie_get_fwnames(struct
fw_name = BRCMF_PCIE_43570_FW_NAME;
nvram_name = BRCMF_PCIE_43570_NVRAM_NAME;
break;
+ case BRCM_CC_4358_CHIP_ID:
+ fw_name = BRCMF_PCIE_4358_FW_NAME;
+ nvram_name = BRCMF_PCIE_4358_NVRAM_NAME;
+ break;
default:
brcmf_err("Unsupported chip 0x%04x\n", devinfo->ci->chip);
return -ENODEV;
@@ -1850,6 +1858,7 @@ static struct pci_device_id brcmf_pcie_d
BRCMF_PCIE_DEVICE(BRCM_PCIE_4356_DEVICE_ID),
BRCMF_PCIE_DEVICE(BRCM_PCIE_43567_DEVICE_ID),
BRCMF_PCIE_DEVICE(BRCM_PCIE_43570_DEVICE_ID),
+ BRCMF_PCIE_DEVICE(BRCM_PCIE_4358_DEVICE_ID),
BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_DEVICE_ID),
BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_2G_DEVICE_ID),
BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_5G_DEVICE_ID),
--- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
@@ -45,6 +45,7 @@
#define BRCM_CC_43567_CHIP_ID 43567
#define BRCM_CC_43569_CHIP_ID 43569
#define BRCM_CC_43570_CHIP_ID 43570
+#define BRCM_CC_4358_CHIP_ID 0x4358
#define BRCM_CC_43602_CHIP_ID 43602
/* USB Device IDs */
@@ -59,6 +60,7 @@
#define BRCM_PCIE_4356_DEVICE_ID 0x43ec
#define BRCM_PCIE_43567_DEVICE_ID 0x43d3
#define BRCM_PCIE_43570_DEVICE_ID 0x43d9
+#define BRCM_PCIE_4358_DEVICE_ID 0x43e9
#define BRCM_PCIE_43602_DEVICE_ID 0x43ba
#define BRCM_PCIE_43602_2G_DEVICE_ID 0x43bb
#define BRCM_PCIE_43602_5G_DEVICE_ID 0x43bc

View File

@ -0,0 +1,30 @@
From: Hante Meuleman <meuleman@broadcom.com>
Date: Tue, 14 Apr 2015 20:10:32 +0200
Subject: [PATCH] brcmfmac: add additional 43602 pcie device id.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
--- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
@@ -1862,6 +1862,7 @@ static struct pci_device_id brcmf_pcie_d
BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_DEVICE_ID),
BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_2G_DEVICE_ID),
BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_5G_DEVICE_ID),
+ BRCMF_PCIE_DEVICE(BRCM_PCIE_43602_RAW_DEVICE_ID),
{ /* end: all zeroes */ }
};
--- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
+++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h
@@ -64,6 +64,7 @@
#define BRCM_PCIE_43602_DEVICE_ID 0x43ba
#define BRCM_PCIE_43602_2G_DEVICE_ID 0x43bb
#define BRCM_PCIE_43602_5G_DEVICE_ID 0x43bc
+#define BRCM_PCIE_43602_RAW_DEVICE_ID 43602
/* brcmsmac IDs */
#define BCM4313_D11N2G_ID 0x4727 /* 4313 802.11n 2.4G device */

View File

@ -0,0 +1,351 @@
From: Hante Meuleman <meuleman@broadcom.com>
Date: Tue, 14 Apr 2015 20:10:33 +0200
Subject: [PATCH] brcmfmac: Add support for multiple PCIE devices in
nvram.
With PCIE it is possible to support multiple devices with the
same device type. They all load the same nvram file. In order to
support this the nvram can specify which part of the nvram is
for which pcie device. This patch adds support for these new
types of nvram files.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
--- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
@@ -23,6 +23,10 @@
#include "debug.h"
#include "firmware.h"
+#define BRCMF_FW_MAX_NVRAM_SIZE 64000
+#define BRCMF_FW_NVRAM_DEVPATH_LEN 19 /* devpath0=pcie/1/4/ */
+#define BRCMF_FW_NVRAM_PCIEDEV_LEN 9 /* pcie/1/4/ */
+
char brcmf_firmware_path[BRCMF_FW_PATH_LEN];
module_param_string(firmware_path, brcmf_firmware_path,
BRCMF_FW_PATH_LEN, 0440);
@@ -46,6 +50,8 @@ enum nvram_parser_state {
* @column: current column in line.
* @pos: byte offset in input buffer.
* @entry: start position of key,value entry.
+ * @multi_dev_v1: detect pcie multi device v1 (compressed).
+ * @multi_dev_v2: detect pcie multi device v2.
*/
struct nvram_parser {
enum nvram_parser_state state;
@@ -56,6 +62,8 @@ struct nvram_parser {
u32 column;
u32 pos;
u32 entry;
+ bool multi_dev_v1;
+ bool multi_dev_v2;
};
static bool is_nvram_char(char c)
@@ -108,6 +116,10 @@ static enum nvram_parser_state brcmf_nvr
st = COMMENT;
else
st = VALUE;
+ if (strncmp(&nvp->fwnv->data[nvp->entry], "devpath", 7) == 0)
+ nvp->multi_dev_v1 = true;
+ if (strncmp(&nvp->fwnv->data[nvp->entry], "pcie/", 5) == 0)
+ nvp->multi_dev_v2 = true;
} else if (!is_nvram_char(c)) {
brcmf_dbg(INFO, "warning: ln=%d:col=%d: '=' expected, skip invalid key entry\n",
nvp->line, nvp->column);
@@ -133,6 +145,8 @@ brcmf_nvram_handle_value(struct nvram_pa
ekv = (u8 *)&nvp->fwnv->data[nvp->pos];
skv = (u8 *)&nvp->fwnv->data[nvp->entry];
cplen = ekv - skv;
+ if (nvp->nvram_len + cplen + 1 >= BRCMF_FW_MAX_NVRAM_SIZE)
+ return END;
/* copy to output buffer */
memcpy(&nvp->nvram[nvp->nvram_len], skv, cplen);
nvp->nvram_len += cplen;
@@ -180,10 +194,18 @@ static enum nvram_parser_state
static int brcmf_init_nvram_parser(struct nvram_parser *nvp,
const struct firmware *nv)
{
+ size_t size;
+
memset(nvp, 0, sizeof(*nvp));
nvp->fwnv = nv;
+ /* Limit size to MAX_NVRAM_SIZE, some files contain lot of comment */
+ if (nv->size > BRCMF_FW_MAX_NVRAM_SIZE)
+ size = BRCMF_FW_MAX_NVRAM_SIZE;
+ else
+ size = nv->size;
/* Alloc for extra 0 byte + roundup by 4 + length field */
- nvp->nvram = kzalloc(nv->size + 1 + 3 + sizeof(u32), GFP_KERNEL);
+ size += 1 + 3 + sizeof(u32);
+ nvp->nvram = kzalloc(size, GFP_KERNEL);
if (!nvp->nvram)
return -ENOMEM;
@@ -192,12 +214,136 @@ static int brcmf_init_nvram_parser(struc
return 0;
}
+/* brcmf_fw_strip_multi_v1 :Some nvram files contain settings for multiple
+ * devices. Strip it down for one device, use domain_nr/bus_nr to determine
+ * which data is to be returned. v1 is the version where nvram is stored
+ * compressed and "devpath" maps to index for valid entries.
+ */
+static void brcmf_fw_strip_multi_v1(struct nvram_parser *nvp, u16 domain_nr,
+ u16 bus_nr)
+{
+ u32 i, j;
+ bool found;
+ u8 *nvram;
+ u8 id;
+
+ nvram = kzalloc(nvp->nvram_len + 1 + 3 + sizeof(u32), GFP_KERNEL);
+ if (!nvram)
+ goto fail;
+
+ /* min length: devpath0=pcie/1/4/ + 0:x=y */
+ if (nvp->nvram_len < BRCMF_FW_NVRAM_DEVPATH_LEN + 6)
+ goto fail;
+
+ /* First search for the devpathX and see if it is the configuration
+ * for domain_nr/bus_nr. Search complete nvp
+ */
+ found = false;
+ i = 0;
+ while (i < nvp->nvram_len - BRCMF_FW_NVRAM_DEVPATH_LEN) {
+ /* Format: devpathX=pcie/Y/Z/
+ * Y = domain_nr, Z = bus_nr, X = virtual ID
+ */
+ if ((strncmp(&nvp->nvram[i], "devpath", 7) == 0) &&
+ (strncmp(&nvp->nvram[i + 8], "=pcie/", 6) == 0)) {
+ if (((nvp->nvram[i + 14] - '0') == domain_nr) &&
+ ((nvp->nvram[i + 16] - '0') == bus_nr)) {
+ id = nvp->nvram[i + 7] - '0';
+ found = true;
+ break;
+ }
+ }
+ while (nvp->nvram[i] != 0)
+ i++;
+ i++;
+ }
+ if (!found)
+ goto fail;
+
+ /* Now copy all valid entries, release old nvram and assign new one */
+ i = 0;
+ j = 0;
+ while (i < nvp->nvram_len) {
+ if ((nvp->nvram[i] - '0' == id) && (nvp->nvram[i + 1] == ':')) {
+ i += 2;
+ while (nvp->nvram[i] != 0) {
+ nvram[j] = nvp->nvram[i];
+ i++;
+ j++;
+ }
+ nvram[j] = 0;
+ j++;
+ }
+ while (nvp->nvram[i] != 0)
+ i++;
+ i++;
+ }
+ kfree(nvp->nvram);
+ nvp->nvram = nvram;
+ nvp->nvram_len = j;
+ return;
+
+fail:
+ kfree(nvram);
+ nvp->nvram_len = 0;
+}
+
+/* brcmf_fw_strip_multi_v2 :Some nvram files contain settings for multiple
+ * devices. Strip it down for one device, use domain_nr/bus_nr to determine
+ * which data is to be returned. v2 is the version where nvram is stored
+ * uncompressed, all relevant valid entries are identified by
+ * pcie/domain_nr/bus_nr:
+ */
+static void brcmf_fw_strip_multi_v2(struct nvram_parser *nvp, u16 domain_nr,
+ u16 bus_nr)
+{
+ u32 i, j;
+ u8 *nvram;
+
+ nvram = kzalloc(nvp->nvram_len + 1 + 3 + sizeof(u32), GFP_KERNEL);
+ if (!nvram)
+ goto fail;
+
+ /* Copy all valid entries, release old nvram and assign new one.
+ * Valid entries are of type pcie/X/Y/ where X = domain_nr and
+ * Y = bus_nr.
+ */
+ i = 0;
+ j = 0;
+ while (i < nvp->nvram_len - BRCMF_FW_NVRAM_PCIEDEV_LEN) {
+ if ((strncmp(&nvp->nvram[i], "pcie/", 5) == 0) &&
+ (nvp->nvram[i + 6] == '/') && (nvp->nvram[i + 8] == '/') &&
+ ((nvp->nvram[i + 5] - '0') == domain_nr) &&
+ ((nvp->nvram[i + 7] - '0') == bus_nr)) {
+ i += BRCMF_FW_NVRAM_PCIEDEV_LEN;
+ while (nvp->nvram[i] != 0) {
+ nvram[j] = nvp->nvram[i];
+ i++;
+ j++;
+ }
+ nvram[j] = 0;
+ j++;
+ }
+ while (nvp->nvram[i] != 0)
+ i++;
+ i++;
+ }
+ kfree(nvp->nvram);
+ nvp->nvram = nvram;
+ nvp->nvram_len = j;
+ return;
+fail:
+ kfree(nvram);
+ nvp->nvram_len = 0;
+}
+
/* brcmf_nvram_strip :Takes a buffer of "<var>=<value>\n" lines read from a fil
* and ending in a NUL. Removes carriage returns, empty lines, comment lines,
* and converts newlines to NULs. Shortens buffer as needed and pads with NULs.
* End of buffer is completed with token identifying length of buffer.
*/
-static void *brcmf_fw_nvram_strip(const struct firmware *nv, u32 *new_length)
+static void *brcmf_fw_nvram_strip(const struct firmware *nv, u32 *new_length,
+ u16 domain_nr, u16 bus_nr)
{
struct nvram_parser nvp;
u32 pad;
@@ -212,6 +358,16 @@ static void *brcmf_fw_nvram_strip(const
if (nvp.state == END)
break;
}
+ if (nvp.multi_dev_v1)
+ brcmf_fw_strip_multi_v1(&nvp, domain_nr, bus_nr);
+ else if (nvp.multi_dev_v2)
+ brcmf_fw_strip_multi_v2(&nvp, domain_nr, bus_nr);
+
+ if (nvp.nvram_len == 0) {
+ kfree(nvp.nvram);
+ return NULL;
+ }
+
pad = nvp.nvram_len;
*new_length = roundup(nvp.nvram_len + 1, 4);
while (pad != *new_length) {
@@ -239,6 +395,8 @@ struct brcmf_fw {
u16 flags;
const struct firmware *code;
const char *nvram_name;
+ u16 domain_nr;
+ u16 bus_nr;
void (*done)(struct device *dev, const struct firmware *fw,
void *nvram_image, u32 nvram_len);
};
@@ -254,7 +412,8 @@ static void brcmf_fw_request_nvram_done(
goto fail;
if (fw) {
- nvram = brcmf_fw_nvram_strip(fw, &nvram_length);
+ nvram = brcmf_fw_nvram_strip(fw, &nvram_length,
+ fwctx->domain_nr, fwctx->bus_nr);
release_firmware(fw);
if (!nvram && !(fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL))
goto fail;
@@ -309,11 +468,12 @@ fail:
kfree(fwctx);
}
-int brcmf_fw_get_firmwares(struct device *dev, u16 flags,
- const char *code, const char *nvram,
- void (*fw_cb)(struct device *dev,
- const struct firmware *fw,
- void *nvram_image, u32 nvram_len))
+int brcmf_fw_get_firmwares_pcie(struct device *dev, u16 flags,
+ const char *code, const char *nvram,
+ void (*fw_cb)(struct device *dev,
+ const struct firmware *fw,
+ void *nvram_image, u32 nvram_len),
+ u16 domain_nr, u16 bus_nr)
{
struct brcmf_fw *fwctx;
@@ -333,8 +493,21 @@ int brcmf_fw_get_firmwares(struct device
fwctx->done = fw_cb;
if (flags & BRCMF_FW_REQUEST_NVRAM)
fwctx->nvram_name = nvram;
+ fwctx->domain_nr = domain_nr;
+ fwctx->bus_nr = bus_nr;
return request_firmware_nowait(THIS_MODULE, true, code, dev,
GFP_KERNEL, fwctx,
brcmf_fw_request_code_done);
}
+
+int brcmf_fw_get_firmwares(struct device *dev, u16 flags,
+ const char *code, const char *nvram,
+ void (*fw_cb)(struct device *dev,
+ const struct firmware *fw,
+ void *nvram_image, u32 nvram_len))
+{
+ return brcmf_fw_get_firmwares_pcie(dev, flags, code, nvram, fw_cb, 0,
+ 0);
+}
+
--- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.h
@@ -32,6 +32,12 @@ void brcmf_fw_nvram_free(void *nvram);
* fails it will not use the callback, but call device_release_driver()
* instead which will call the driver .remove() callback.
*/
+int brcmf_fw_get_firmwares_pcie(struct device *dev, u16 flags,
+ const char *code, const char *nvram,
+ void (*fw_cb)(struct device *dev,
+ const struct firmware *fw,
+ void *nvram_image, u32 nvram_len),
+ u16 domain_nr, u16 bus_nr);
int brcmf_fw_get_firmwares(struct device *dev, u16 flags,
const char *code, const char *nvram,
void (*fw_cb)(struct device *dev,
--- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
@@ -1649,8 +1649,13 @@ brcmf_pcie_probe(struct pci_dev *pdev, c
struct brcmf_pciedev_info *devinfo;
struct brcmf_pciedev *pcie_bus_dev;
struct brcmf_bus *bus;
+ u16 domain_nr;
+ u16 bus_nr;
- brcmf_dbg(PCIE, "Enter %x:%x\n", pdev->vendor, pdev->device);
+ domain_nr = pci_domain_nr(pdev->bus) + 1;
+ bus_nr = pdev->bus->number;
+ brcmf_dbg(PCIE, "Enter %x:%x (%d/%d)\n", pdev->vendor, pdev->device,
+ domain_nr, bus_nr);
ret = -ENOMEM;
devinfo = kzalloc(sizeof(*devinfo), GFP_KERNEL);
@@ -1699,10 +1704,10 @@ brcmf_pcie_probe(struct pci_dev *pdev, c
if (ret)
goto fail_bus;
- ret = brcmf_fw_get_firmwares(bus->dev, BRCMF_FW_REQUEST_NVRAM |
- BRCMF_FW_REQ_NV_OPTIONAL,
- devinfo->fw_name, devinfo->nvram_name,
- brcmf_pcie_setup);
+ ret = brcmf_fw_get_firmwares_pcie(bus->dev, BRCMF_FW_REQUEST_NVRAM |
+ BRCMF_FW_REQ_NV_OPTIONAL,
+ devinfo->fw_name, devinfo->nvram_name,
+ brcmf_pcie_setup, domain_nr, bus_nr);
if (ret == 0)
return 0;
fail_bus: