mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 02:29:01 +00:00
kernel: bump 4.14 to 4.14.72
Refreshed all patches. Removed upstreamed: - 180-earlycon-initialize-port-uartclk-based-on-clock-frequency-property.patch - 181-earlycon-remove-hardcoded-port-uartclk-initialization-in-of_setup_earlycon. patch - 700-1-6-e1000e-Remove-Other-from-EIAC.patch - 700-2-6-Partial-revert-e1000e-Avoid-receiver-overrun-interrupt-bursts.patch - 700-3-6-e1000e-Fix-queue-interrupt-re-raising-in-Other-interrupt.patch - 700-4-6-e1000e-Avoid-missed-interrupts-following-ICR-read.patch Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
This commit is contained in:
Koen Vandeputte
parent
2e946ca366
commit
81b2bf8e3b
@ -2,11 +2,11 @@
|
||||
|
||||
LINUX_RELEASE?=1
|
||||
|
||||
LINUX_VERSION-4.14 = .71
|
||||
LINUX_VERSION-4.9 = .129
|
||||
LINUX_VERSION-4.14 = .72
|
||||
|
||||
LINUX_KERNEL_HASH-4.14.71 = 76a4473dbcbd922c23a16130414829a36eb7e2f4e5859bd1b742fffdff907489
|
||||
LINUX_KERNEL_HASH-4.9.129 = 6f5510d3fcfec1bf1e2d9c8e2fdcd7628c1886c6bdb29092adc5ccdf75e39318
|
||||
LINUX_KERNEL_HASH-4.14.72 = df925906250bbc40fcf0137d7ad0fb8edc528d926832634f1233b7540564557f
|
||||
|
||||
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
|
||||
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))
|
||||
|
||||
@ -24,7 +24,7 @@ produce a noisy warning.
|
||||
|
||||
--- a/drivers/usb/host/xhci.c
|
||||
+++ b/drivers/usb/host/xhci.c
|
||||
@@ -357,10 +357,14 @@ static int xhci_try_enable_msi(struct us
|
||||
@@ -372,10 +372,14 @@ static int xhci_try_enable_msi(struct us
|
||||
free_irq(hcd->irq, hcd);
|
||||
hcd->irq = 0;
|
||||
|
||||
|
||||
@ -40,7 +40,7 @@ it on BCM4708 family.
|
||||
/* called during probe() after chip reset completes */
|
||||
--- a/drivers/usb/host/xhci.c
|
||||
+++ b/drivers/usb/host/xhci.c
|
||||
@@ -153,6 +153,49 @@ int xhci_start(struct xhci_hcd *xhci)
|
||||
@@ -168,6 +168,49 @@ int xhci_start(struct xhci_hcd *xhci)
|
||||
return ret;
|
||||
}
|
||||
|
||||
@ -90,7 +90,7 @@ it on BCM4708 family.
|
||||
/*
|
||||
* Reset a halted HC.
|
||||
*
|
||||
@@ -536,10 +579,20 @@ static int xhci_init(struct usb_hcd *hcd
|
||||
@@ -551,10 +594,20 @@ static int xhci_init(struct usb_hcd *hcd
|
||||
|
||||
static int xhci_run_finished(struct xhci_hcd *xhci)
|
||||
{
|
||||
@ -114,7 +114,7 @@ it on BCM4708 family.
|
||||
xhci->shared_hcd->state = HC_STATE_RUNNING;
|
||||
xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
|
||||
|
||||
@@ -549,6 +602,10 @@ static int xhci_run_finished(struct xhci
|
||||
@@ -564,6 +617,10 @@ static int xhci_run_finished(struct xhci
|
||||
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
|
||||
"Finished xhci_run for USB3 roothub");
|
||||
return 0;
|
||||
|
||||
@ -1,45 +0,0 @@
|
||||
From 814453adea7d081ad8917aa0f32d6a14165a3563 Mon Sep 17 00:00:00 2001
|
||||
From: Michal Simek <michal.simek@xilinx.com>
|
||||
Date: Tue, 10 Apr 2018 15:32:28 +0200
|
||||
Subject: earlycon: Initialize port->uartclk based on clock-frequency property
|
||||
|
||||
From: Michal Simek <michal.simek@xilinx.com>
|
||||
|
||||
commit 814453adea7d081ad8917aa0f32d6a14165a3563 upstream.
|
||||
|
||||
On DT based platforms when current-speed property is present baudrate
|
||||
is setup. Also port->uartclk is initialized to bogus BASE_BAUD * 16
|
||||
value. Drivers like uartps/ns16550 contain logic when baudrate and
|
||||
uartclk is used for baudrate calculation.
|
||||
|
||||
The patch is reading optional clock-frequency property to replace bogus
|
||||
BASE_BAUD * 16 calculation to have proper baudrate calculation.
|
||||
|
||||
[-stable comment: commit 31cb9a8575ca ("earlycon: initialise baud field
|
||||
of earlycon device structure") has changed 8250_early.c behavior which
|
||||
now tries to setup UART speed. Ignoring clock-frequency results in
|
||||
wrong value of calculated divisor & malformed early console output.]
|
||||
|
||||
Fixes: 31cb9a8575ca ("earlycon: initialise baud field of earlycon device structure")
|
||||
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
||||
[rmilecki: add -stable comment and Fixes tag]
|
||||
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
||||
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||||
|
||||
---
|
||||
drivers/tty/serial/earlycon.c | 4 ++++
|
||||
1 file changed, 4 insertions(+)
|
||||
|
||||
--- a/drivers/tty/serial/earlycon.c
|
||||
+++ b/drivers/tty/serial/earlycon.c
|
||||
@@ -289,6 +289,10 @@ int __init of_setup_earlycon(const struc
|
||||
if (val)
|
||||
early_console_dev.baud = be32_to_cpu(*val);
|
||||
|
||||
+ val = of_get_flat_dt_prop(node, "clock-frequency", NULL);
|
||||
+ if (val)
|
||||
+ port->uartclk = be32_to_cpu(*val);
|
||||
+
|
||||
if (options) {
|
||||
early_console_dev.baud = simple_strtoul(options, NULL, 0);
|
||||
strlcpy(early_console_dev.options, options,
|
||||
@ -1,40 +0,0 @@
|
||||
From 182ead3e418a20328b73152b8e81fc8b4cac3b0b Mon Sep 17 00:00:00 2001
|
||||
From: Michal Simek <michal.simek@xilinx.com>
|
||||
Date: Wed, 25 Apr 2018 15:48:42 +0200
|
||||
Subject: earlycon: Remove hardcoded port->uartclk initialization in of_setup_earlycon
|
||||
|
||||
From: Michal Simek <michal.simek@xilinx.com>
|
||||
|
||||
commit 182ead3e418a20328b73152b8e81fc8b4cac3b0b upstream.
|
||||
|
||||
There is no reason to initialize uartclk to BASE_BAUD * 16 for DT based
|
||||
systems.
|
||||
|
||||
[-stable comment: commit 31cb9a8575ca ("earlycon: initialise baud field
|
||||
of earlycon device structure") has changed 8250_early.c behavior which
|
||||
now tries to setup UART speed.
|
||||
Already-backported upstream commit 0ff3ab701963 ("serial: 8250_early:
|
||||
Only set divisor if valid clk & baud") handles properly uartclk not
|
||||
being set but it still requires backporting fix for wrong uartclk val.
|
||||
This fixes malformed early console output on arch-es with BASE_BAUD.]
|
||||
|
||||
Fixes: 31cb9a8575ca ("earlycon: initialise baud field of earlycon device structure")
|
||||
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
||||
Tested-by: Matt Redfearn <matt.redfearn@mips.com>
|
||||
[rmilecki: add -stable comment and Fixes tag]
|
||||
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
||||
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||||
---
|
||||
drivers/tty/serial/earlycon.c | 1 -
|
||||
1 file changed, 1 deletion(-)
|
||||
|
||||
--- a/drivers/tty/serial/earlycon.c
|
||||
+++ b/drivers/tty/serial/earlycon.c
|
||||
@@ -254,7 +254,6 @@ int __init of_setup_earlycon(const struc
|
||||
return -ENXIO;
|
||||
}
|
||||
port->mapbase = addr;
|
||||
- port->uartclk = BASE_BAUD * 16;
|
||||
|
||||
val = of_get_flat_dt_prop(node, "reg-offset", NULL);
|
||||
if (val)
|
||||
@ -1,66 +0,0 @@
|
||||
From patchwork Mon Mar 5 21:40:25 2018
|
||||
Content-Type: text/plain; charset="utf-8"
|
||||
MIME-Version: 1.0
|
||||
Content-Transfer-Encoding: 7bit
|
||||
Subject: [net,v2,1/6] e1000e: Remove Other from EIAC
|
||||
X-Patchwork-Submitter: "Kirsher, Jeffrey T" <jeffrey.t.kirsher@intel.com>
|
||||
X-Patchwork-Id: 881773
|
||||
X-Patchwork-Delegate: davem@davemloft.net
|
||||
Message-Id: <20180305214030.25141-2-jeffrey.t.kirsher@intel.com>
|
||||
To: davem@davemloft.net
|
||||
Cc: Benjamin Poirier <bpoirier@suse.com>, netdev@vger.kernel.org,
|
||||
nhorman@redhat.com, sassmann@redhat.com, jogreene@redhat.com,
|
||||
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
||||
Date: Mon, 5 Mar 2018 13:40:25 -0800
|
||||
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
||||
List-Id: <netdev.vger.kernel.org>
|
||||
|
||||
From: Benjamin Poirier <bpoirier@suse.com>
|
||||
|
||||
It was reported that emulated e1000e devices in vmware esxi 6.5 Build
|
||||
7526125 do not link up after commit 4aea7a5c5e94 ("e1000e: Avoid receiver
|
||||
overrun interrupt bursts", v4.15-rc1). Some tracing shows that after
|
||||
e1000e_trigger_lsc() is called, ICR reads out as 0x0 in e1000_msix_other()
|
||||
on emulated e1000e devices. In comparison, on real e1000e 82574 hardware,
|
||||
icr=0x80000004 (_INT_ASSERTED | _LSC) in the same situation.
|
||||
|
||||
Some experimentation showed that this flaw in vmware e1000e emulation can
|
||||
be worked around by not setting Other in EIAC. This is how it was before
|
||||
16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1).
|
||||
|
||||
Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts")
|
||||
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
|
||||
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
|
||||
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
||||
---
|
||||
drivers/net/ethernet/intel/e1000e/netdev.c | 5 +++--
|
||||
1 file changed, 3 insertions(+), 2 deletions(-)
|
||||
|
||||
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
|
||||
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
|
||||
@@ -1914,6 +1914,8 @@ static irqreturn_t e1000_msix_other(int
|
||||
bool enable = true;
|
||||
|
||||
icr = er32(ICR);
|
||||
+ ew32(ICR, E1000_ICR_OTHER);
|
||||
+
|
||||
if (icr & E1000_ICR_RXO) {
|
||||
ew32(ICR, E1000_ICR_RXO);
|
||||
enable = false;
|
||||
@@ -2036,7 +2038,6 @@ static void e1000_configure_msix(struct
|
||||
hw->hw_addr + E1000_EITR_82574(vector));
|
||||
else
|
||||
writel(1, hw->hw_addr + E1000_EITR_82574(vector));
|
||||
- adapter->eiac_mask |= E1000_IMS_OTHER;
|
||||
|
||||
/* Cause Tx interrupts on every write back */
|
||||
ivar |= BIT(31);
|
||||
@@ -2261,7 +2262,7 @@ static void e1000_irq_enable(struct e100
|
||||
|
||||
if (adapter->msix_entries) {
|
||||
ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
|
||||
- ew32(IMS, adapter->eiac_mask | E1000_IMS_LSC);
|
||||
+ ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC);
|
||||
} else if (hw->mac.type >= e1000_pch_lpt) {
|
||||
ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER);
|
||||
} else {
|
||||
@ -1,84 +0,0 @@
|
||||
From patchwork Mon Mar 5 21:40:26 2018
|
||||
Content-Type: text/plain; charset="utf-8"
|
||||
MIME-Version: 1.0
|
||||
Content-Transfer-Encoding: 7bit
|
||||
Subject: [net, v2,
|
||||
2/6] Partial revert "e1000e: Avoid receiver overrun interrupt bursts"
|
||||
X-Patchwork-Submitter: "Kirsher, Jeffrey T" <jeffrey.t.kirsher@intel.com>
|
||||
X-Patchwork-Id: 881769
|
||||
X-Patchwork-Delegate: davem@davemloft.net
|
||||
Message-Id: <20180305214030.25141-3-jeffrey.t.kirsher@intel.com>
|
||||
To: davem@davemloft.net
|
||||
Cc: Benjamin Poirier <bpoirier@suse.com>, netdev@vger.kernel.org,
|
||||
nhorman@redhat.com, sassmann@redhat.com, jogreene@redhat.com,
|
||||
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
||||
Date: Mon, 5 Mar 2018 13:40:26 -0800
|
||||
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
||||
List-Id: <netdev.vger.kernel.org>
|
||||
|
||||
From: Benjamin Poirier <bpoirier@suse.com>
|
||||
|
||||
This partially reverts commit 4aea7a5c5e940c1723add439f4088844cd26196d.
|
||||
|
||||
We keep the fix for the first part of the problem (1) described in the log
|
||||
of that commit, that is to read ICR in the other interrupt handler. We
|
||||
remove the fix for the second part of the problem (2), Other interrupt
|
||||
throttling.
|
||||
|
||||
Bursts of "Other" interrupts may once again occur during rxo (receive
|
||||
overflow) traffic conditions. This is deemed acceptable in the interest of
|
||||
avoiding unforeseen fallout from changes that are not strictly necessary.
|
||||
As discussed, the e1000e driver should be in "maintenance mode".
|
||||
|
||||
Link: https://www.spinics.net/lists/netdev/msg480675.html
|
||||
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
|
||||
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
|
||||
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
|
||||
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
||||
---
|
||||
drivers/net/ethernet/intel/e1000e/netdev.c | 16 ++--------------
|
||||
1 file changed, 2 insertions(+), 14 deletions(-)
|
||||
|
||||
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
|
||||
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
|
||||
@@ -1911,21 +1911,10 @@ static irqreturn_t e1000_msix_other(int
|
||||
struct e1000_adapter *adapter = netdev_priv(netdev);
|
||||
struct e1000_hw *hw = &adapter->hw;
|
||||
u32 icr;
|
||||
- bool enable = true;
|
||||
|
||||
icr = er32(ICR);
|
||||
ew32(ICR, E1000_ICR_OTHER);
|
||||
|
||||
- if (icr & E1000_ICR_RXO) {
|
||||
- ew32(ICR, E1000_ICR_RXO);
|
||||
- enable = false;
|
||||
- /* napi poll will re-enable Other, make sure it runs */
|
||||
- if (napi_schedule_prep(&adapter->napi)) {
|
||||
- adapter->total_rx_bytes = 0;
|
||||
- adapter->total_rx_packets = 0;
|
||||
- __napi_schedule(&adapter->napi);
|
||||
- }
|
||||
- }
|
||||
if (icr & E1000_ICR_LSC) {
|
||||
ew32(ICR, E1000_ICR_LSC);
|
||||
hw->mac.get_link_status = true;
|
||||
@@ -1934,7 +1923,7 @@ static irqreturn_t e1000_msix_other(int
|
||||
mod_timer(&adapter->watchdog_timer, jiffies + 1);
|
||||
}
|
||||
|
||||
- if (enable && !test_bit(__E1000_DOWN, &adapter->state))
|
||||
+ if (!test_bit(__E1000_DOWN, &adapter->state))
|
||||
ew32(IMS, E1000_IMS_OTHER);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
@@ -2704,8 +2693,7 @@ static int e1000e_poll(struct napi_struc
|
||||
napi_complete_done(napi, work_done);
|
||||
if (!test_bit(__E1000_DOWN, &adapter->state)) {
|
||||
if (adapter->msix_entries)
|
||||
- ew32(IMS, adapter->rx_ring->ims_val |
|
||||
- E1000_IMS_OTHER);
|
||||
+ ew32(IMS, adapter->rx_ring->ims_val);
|
||||
else
|
||||
e1000_irq_enable(adapter);
|
||||
}
|
||||
@ -1,50 +0,0 @@
|
||||
From patchwork Mon Mar 5 21:40:27 2018
|
||||
Content-Type: text/plain; charset="utf-8"
|
||||
MIME-Version: 1.0
|
||||
Content-Transfer-Encoding: 7bit
|
||||
Subject: [net, v2,
|
||||
3/6] e1000e: Fix queue interrupt re-raising in Other interrupt
|
||||
X-Patchwork-Submitter: "Kirsher, Jeffrey T" <jeffrey.t.kirsher@intel.com>
|
||||
X-Patchwork-Id: 881775
|
||||
X-Patchwork-Delegate: davem@davemloft.net
|
||||
Message-Id: <20180305214030.25141-4-jeffrey.t.kirsher@intel.com>
|
||||
To: davem@davemloft.net
|
||||
Cc: Benjamin Poirier <bpoirier@suse.com>, netdev@vger.kernel.org,
|
||||
nhorman@redhat.com, sassmann@redhat.com, jogreene@redhat.com,
|
||||
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
||||
Date: Mon, 5 Mar 2018 13:40:27 -0800
|
||||
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
||||
List-Id: <netdev.vger.kernel.org>
|
||||
|
||||
From: Benjamin Poirier <bpoirier@suse.com>
|
||||
|
||||
Restores the ICS write for Rx/Tx queue interrupts which was present before
|
||||
commit 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1)
|
||||
but was not restored in commit 4aea7a5c5e94
|
||||
("e1000e: Avoid receiver overrun interrupt bursts", v4.15-rc1).
|
||||
|
||||
This re-raises the queue interrupts in case the txq or rxq bits were set in
|
||||
ICR and the Other interrupt handler read and cleared ICR before the queue
|
||||
interrupt was raised.
|
||||
|
||||
Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts")
|
||||
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
|
||||
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
|
||||
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
|
||||
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
||||
---
|
||||
drivers/net/ethernet/intel/e1000e/netdev.c | 3 +++
|
||||
1 file changed, 3 insertions(+)
|
||||
|
||||
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
|
||||
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
|
||||
@@ -1915,6 +1915,9 @@ static irqreturn_t e1000_msix_other(int
|
||||
icr = er32(ICR);
|
||||
ew32(ICR, E1000_ICR_OTHER);
|
||||
|
||||
+ if (icr & adapter->eiac_mask)
|
||||
+ ew32(ICS, (icr & adapter->eiac_mask));
|
||||
+
|
||||
if (icr & E1000_ICR_LSC) {
|
||||
ew32(ICR, E1000_ICR_LSC);
|
||||
hw->mac.get_link_status = true;
|
||||
@ -1,131 +0,0 @@
|
||||
From patchwork Mon Mar 5 21:40:28 2018
|
||||
Content-Type: text/plain; charset="utf-8"
|
||||
MIME-Version: 1.0
|
||||
Content-Transfer-Encoding: 7bit
|
||||
Subject: [net,v2,4/6] e1000e: Avoid missed interrupts following ICR read
|
||||
X-Patchwork-Submitter: "Kirsher, Jeffrey T" <jeffrey.t.kirsher@intel.com>
|
||||
X-Patchwork-Id: 881771
|
||||
X-Patchwork-Delegate: davem@davemloft.net
|
||||
Message-Id: <20180305214030.25141-5-jeffrey.t.kirsher@intel.com>
|
||||
To: davem@davemloft.net
|
||||
Cc: Benjamin Poirier <bpoirier@suse.com>, netdev@vger.kernel.org,
|
||||
nhorman@redhat.com, sassmann@redhat.com, jogreene@redhat.com,
|
||||
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
||||
Date: Mon, 5 Mar 2018 13:40:28 -0800
|
||||
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
||||
List-Id: <netdev.vger.kernel.org>
|
||||
|
||||
From: Benjamin Poirier <bpoirier@suse.com>
|
||||
|
||||
The 82574 specification update errata 12 states that interrupts may be
|
||||
missed if ICR is read while INT_ASSERTED is not set. Avoid that problem by
|
||||
setting all bits related to events that can trigger the Other interrupt in
|
||||
IMS.
|
||||
|
||||
The Other interrupt is raised for such events regardless of whether or not
|
||||
they are set in IMS. However, only when they are set is the INT_ASSERTED
|
||||
bit also set in ICR.
|
||||
|
||||
By doing this, we ensure that INT_ASSERTED is always set when we read ICR
|
||||
in e1000_msix_other() and steer clear of the errata. This also ensures that
|
||||
ICR will automatically be cleared on read, therefore we no longer need to
|
||||
clear bits explicitly.
|
||||
|
||||
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
|
||||
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
|
||||
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
|
||||
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
||||
---
|
||||
drivers/net/ethernet/intel/e1000e/defines.h | 21 ++++++++++++++++++++-
|
||||
drivers/net/ethernet/intel/e1000e/netdev.c | 11 ++++-------
|
||||
2 files changed, 24 insertions(+), 8 deletions(-)
|
||||
|
||||
--- a/drivers/net/ethernet/intel/e1000e/defines.h
|
||||
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
|
||||
@@ -400,6 +400,10 @@
|
||||
#define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */
|
||||
#define E1000_ICR_RXO 0x00000040 /* Receiver Overrun */
|
||||
#define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */
|
||||
+#define E1000_ICR_MDAC 0x00000200 /* MDIO Access Complete */
|
||||
+#define E1000_ICR_SRPD 0x00010000 /* Small Receive Packet Detected */
|
||||
+#define E1000_ICR_ACK 0x00020000 /* Receive ACK Frame Detected */
|
||||
+#define E1000_ICR_MNG 0x00040000 /* Manageability Event Detected */
|
||||
#define E1000_ICR_ECCER 0x00400000 /* Uncorrectable ECC Error */
|
||||
/* If this bit asserted, the driver should claim the interrupt */
|
||||
#define E1000_ICR_INT_ASSERTED 0x80000000
|
||||
@@ -407,7 +411,7 @@
|
||||
#define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */
|
||||
#define E1000_ICR_TXQ0 0x00400000 /* Tx Queue 0 Interrupt */
|
||||
#define E1000_ICR_TXQ1 0x00800000 /* Tx Queue 1 Interrupt */
|
||||
-#define E1000_ICR_OTHER 0x01000000 /* Other Interrupts */
|
||||
+#define E1000_ICR_OTHER 0x01000000 /* Other Interrupt */
|
||||
|
||||
/* PBA ECC Register */
|
||||
#define E1000_PBA_ECC_COUNTER_MASK 0xFFF00000 /* ECC counter mask */
|
||||
@@ -431,12 +435,27 @@
|
||||
E1000_IMS_RXSEQ | \
|
||||
E1000_IMS_LSC)
|
||||
|
||||
+/* These are all of the events related to the OTHER interrupt.
|
||||
+ */
|
||||
+#define IMS_OTHER_MASK ( \
|
||||
+ E1000_IMS_LSC | \
|
||||
+ E1000_IMS_RXO | \
|
||||
+ E1000_IMS_MDAC | \
|
||||
+ E1000_IMS_SRPD | \
|
||||
+ E1000_IMS_ACK | \
|
||||
+ E1000_IMS_MNG)
|
||||
+
|
||||
/* Interrupt Mask Set */
|
||||
#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
|
||||
#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
|
||||
#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */
|
||||
#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */
|
||||
+#define E1000_IMS_RXO E1000_ICR_RXO /* Receiver Overrun */
|
||||
#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */
|
||||
+#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO Access Complete */
|
||||
+#define E1000_IMS_SRPD E1000_ICR_SRPD /* Small Receive Packet */
|
||||
+#define E1000_IMS_ACK E1000_ICR_ACK /* Receive ACK Frame Detected */
|
||||
+#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability Event */
|
||||
#define E1000_IMS_ECCER E1000_ICR_ECCER /* Uncorrectable ECC Error */
|
||||
#define E1000_IMS_RXQ0 E1000_ICR_RXQ0 /* Rx Queue 0 Interrupt */
|
||||
#define E1000_IMS_RXQ1 E1000_ICR_RXQ1 /* Rx Queue 1 Interrupt */
|
||||
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
|
||||
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
|
||||
@@ -1910,16 +1910,12 @@ static irqreturn_t e1000_msix_other(int
|
||||
struct net_device *netdev = data;
|
||||
struct e1000_adapter *adapter = netdev_priv(netdev);
|
||||
struct e1000_hw *hw = &adapter->hw;
|
||||
- u32 icr;
|
||||
-
|
||||
- icr = er32(ICR);
|
||||
- ew32(ICR, E1000_ICR_OTHER);
|
||||
+ u32 icr = er32(ICR);
|
||||
|
||||
if (icr & adapter->eiac_mask)
|
||||
ew32(ICS, (icr & adapter->eiac_mask));
|
||||
|
||||
if (icr & E1000_ICR_LSC) {
|
||||
- ew32(ICR, E1000_ICR_LSC);
|
||||
hw->mac.get_link_status = true;
|
||||
/* guard against interrupt when we're going down */
|
||||
if (!test_bit(__E1000_DOWN, &adapter->state))
|
||||
@@ -1927,7 +1923,7 @@ static irqreturn_t e1000_msix_other(int
|
||||
}
|
||||
|
||||
if (!test_bit(__E1000_DOWN, &adapter->state))
|
||||
- ew32(IMS, E1000_IMS_OTHER);
|
||||
+ ew32(IMS, E1000_IMS_OTHER | IMS_OTHER_MASK);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
@@ -2254,7 +2250,8 @@ static void e1000_irq_enable(struct e100
|
||||
|
||||
if (adapter->msix_entries) {
|
||||
ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
|
||||
- ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC);
|
||||
+ ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER |
|
||||
+ IMS_OTHER_MASK);
|
||||
} else if (hw->mac.type >= e1000_pch_lpt) {
|
||||
ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER);
|
||||
} else {
|
||||
@ -181,7 +181,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
|
||||
cfg->fc_flags |= RTF_REJECT;
|
||||
|
||||
if (rtm->rtm_type == RTN_LOCAL)
|
||||
@@ -3494,6 +3528,9 @@ static int rt6_fill_node(struct net *net
|
||||
@@ -3499,6 +3533,9 @@ static int rt6_fill_node(struct net *net
|
||||
case -EACCES:
|
||||
rtm->rtm_type = RTN_PROHIBIT;
|
||||
break;
|
||||
@ -191,7 +191,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
|
||||
case -EAGAIN:
|
||||
rtm->rtm_type = RTN_THROW;
|
||||
break;
|
||||
@@ -3812,6 +3849,8 @@ static int ip6_route_dev_notify(struct n
|
||||
@@ -3817,6 +3854,8 @@ static int ip6_route_dev_notify(struct n
|
||||
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
|
||||
net->ipv6.ip6_prohibit_entry->dst.dev = dev;
|
||||
net->ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(dev);
|
||||
@ -200,7 +200,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
|
||||
net->ipv6.ip6_blk_hole_entry->dst.dev = dev;
|
||||
net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev);
|
||||
#endif
|
||||
@@ -3823,6 +3862,7 @@ static int ip6_route_dev_notify(struct n
|
||||
@@ -3828,6 +3867,7 @@ static int ip6_route_dev_notify(struct n
|
||||
in6_dev_put_clear(&net->ipv6.ip6_null_entry->rt6i_idev);
|
||||
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
|
||||
in6_dev_put_clear(&net->ipv6.ip6_prohibit_entry->rt6i_idev);
|
||||
@ -208,7 +208,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
|
||||
in6_dev_put_clear(&net->ipv6.ip6_blk_hole_entry->rt6i_idev);
|
||||
#endif
|
||||
}
|
||||
@@ -4039,6 +4079,17 @@ static int __net_init ip6_route_net_init
|
||||
@@ -4044,6 +4084,17 @@ static int __net_init ip6_route_net_init
|
||||
net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops;
|
||||
dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst,
|
||||
ip6_template_metrics, true);
|
||||
@ -226,7 +226,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
|
||||
#endif
|
||||
|
||||
net->ipv6.sysctl.flush_delay = 0;
|
||||
@@ -4057,6 +4108,8 @@ out:
|
||||
@@ -4062,6 +4113,8 @@ out:
|
||||
return ret;
|
||||
|
||||
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
|
||||
@ -235,7 +235,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
|
||||
out_ip6_prohibit_entry:
|
||||
kfree(net->ipv6.ip6_prohibit_entry);
|
||||
out_ip6_null_entry:
|
||||
@@ -4074,6 +4127,7 @@ static void __net_exit ip6_route_net_exi
|
||||
@@ -4079,6 +4132,7 @@ static void __net_exit ip6_route_net_exi
|
||||
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
|
||||
kfree(net->ipv6.ip6_prohibit_entry);
|
||||
kfree(net->ipv6.ip6_blk_hole_entry);
|
||||
@ -243,7 +243,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
|
||||
#endif
|
||||
dst_entries_destroy(&net->ipv6.ip6_dst_ops);
|
||||
}
|
||||
@@ -4147,6 +4201,9 @@ void __init ip6_route_init_special_entri
|
||||
@@ -4152,6 +4206,9 @@ void __init ip6_route_init_special_entri
|
||||
init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
|
||||
init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev;
|
||||
init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
|
||||
|
||||
@ -71,7 +71,7 @@ Origin: other, https://patchwork.kernel.org/patch/10339127/
|
||||
#interrupt-cells = <2>;
|
||||
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
|
||||
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
|
||||
@@ -831,11 +831,24 @@ static int msm_gpio_init(struct msm_pinc
|
||||
@@ -839,11 +839,24 @@ static int msm_gpio_init(struct msm_pinc
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
||||
@ -112,7 +112,7 @@ Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
|
||||
#include "../core.h"
|
||||
#include "../pinconf.h"
|
||||
#include "pinctrl-msm.h"
|
||||
@@ -638,6 +639,9 @@ static void msm_gpio_irq_ack(struct irq_
|
||||
@@ -646,6 +647,9 @@ static void msm_gpio_irq_ack(struct irq_
|
||||
const struct msm_pingroup *g;
|
||||
unsigned long flags;
|
||||
u32 val;
|
||||
@ -122,7 +122,7 @@ Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
|
||||
|
||||
g = &pctrl->soc->groups[d->hwirq];
|
||||
|
||||
@@ -676,11 +680,30 @@ static int msm_gpio_irq_set_type(struct
|
||||
@@ -684,11 +688,30 @@ static int msm_gpio_irq_set_type(struct
|
||||
else
|
||||
clear_bit(d->hwirq, pctrl->dual_edge_irqs);
|
||||
|
||||
@ -157,7 +157,7 @@ Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
|
||||
|
||||
/* Update configuration for gpio.
|
||||
* RAW_STATUS_EN is left on for all gpio irqs. Due to the
|
||||
@@ -954,4 +977,3 @@ int msm_pinctrl_remove(struct platform_d
|
||||
@@ -962,4 +985,3 @@ int msm_pinctrl_remove(struct platform_d
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL(msm_pinctrl_remove);
|
||||
|
||||
@ -112,7 +112,7 @@ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||||
ret = PTR_ERR(hcd->usb_phy);
|
||||
--- a/drivers/usb/host/xhci.c
|
||||
+++ b/drivers/usb/host/xhci.c
|
||||
@@ -597,11 +597,7 @@ int xhci_run(struct usb_hcd *hcd)
|
||||
@@ -612,11 +612,7 @@ int xhci_run(struct usb_hcd *hcd)
|
||||
"// Set the interrupt modulation register");
|
||||
temp = readl(&xhci->ir_set->irq_control);
|
||||
temp &= ~ER_IRQ_INTERVAL_MASK;
|
||||
|
||||
Loading…
Reference in New Issue
Block a user