ramips: use WiFi LED DT triggers for TP-Link RE650 v1

This moves WiFi LED triggers from 01_leds to device tree.

While at it, convert the labels there to lower case; this is
more commonly used and the change will actually remove competition
between DT trigger and leftover uci config on already installed
systems.

Suggested-by: Georgi Vlaev <georgi.vlaev@gmail.com>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
Adrian Schmutzler 2020-07-07 11:49:36 +02:00
parent d8ab3216e6
commit 7cb721c03f
2 changed files with 7 additions and 5 deletions

View File

@ -23,13 +23,15 @@
};
wifi2g {
label = "re650-v1:blue:wifi2G";
label = "re650-v1:blue:wifi2g";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wifi5g {
label = "re650-v1:blue:wifi5G";
label = "re650-v1:blue:wifi5g";
gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wps_red {

View File

@ -68,14 +68,14 @@ netgear,r6800)
ucidef_set_led_netdev "lan3" "LAN3" "$boardname:white:lan3" "lan3"
ucidef_set_led_netdev "lan4" "LAN4" "$boardname:white:lan4" "lan4"
;;
tplink,re350-v1|\
tplink,re650-v1)
tplink,re350-v1)
ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$boardname:blue:wifi2G" "wlan0"
ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$boardname:blue:wifi5G" "wlan1"
ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "lan" "tx rx"
ucidef_set_led_netdev "eth_link" "LAN link" "$boardname:green:eth_link" "lan" "link"
;;
tplink,re500-v1)
tplink,re500-v1|\
tplink,re650-v1)
ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "lan" "tx rx"
ucidef_set_led_netdev "eth_link" "LAN link" "$boardname:green:eth_link" "lan" "link"
;;