ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-21 14:37:57 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity

at91: kernel: bump to 5.10

Browse Source 
Bump at91 targets to kernel v5.10. With this patches and files for
wb45n and wb50n were removed as they are now included in upstream
kernel. Along with:
- this the kernel config for sama5d2 and sam9x targets has been
  refreshed (with make kernel_menuconfig + save);
- CONFIG_ARCH_AT91 and specific sam9x SoCs (AT91RM9200, AT91SAM9,
  SAM9X60) has been enabled such that sam9x SoCs to be able to boot.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
This commit is contained in:
Claudiu Beznea 2021-10-11 11:47:21 +03:00 committed by Hauke Mehrtens
parent 05a7af9ca0
commit 7bd0fba3df
14 changed files with 109 additions and 779 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
target/linux/at91/Makefile
View File

@ -10,7 +10,7 @@ BOARDNAME:=Microchip (Atmel AT91)
FEATURES:=ext4 squashfs targz usb usbgadget ubifs
SUBTARGETS:=sama5 sam9x
KERNEL_PATCHVER:=5.4
KERNEL_PATCHVER:=5.10
include $(INCLUDE_DIR)/target.mk

220
target/linux/at91/files/arch/arm/boot/dts/wb45n.dts
View File

@ -1,220 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* wb45n.dts - Device Tree file for WB45NBT board
*
* Copyright (C) 2015 Laird
*/
/dts-v1/;
#include "at91sam9g25.dtsi"
/ {
model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
chosen {
bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
};
memory {
reg = <0x20000000 0x4000000>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock@0 {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
slow_xtal {
clock-frequency = <32768>;
};
main_xtal {
clock-frequency = <12000000>;
};
};
ahb {
apb {
rstc@fffffe00 {
compatible = "atmel,sama5d3-rstc";
};
pinctrl@fffff400 {
nand {
pinctrl_nand: nand-0 {
atmel,pins =
<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD0 periph A Read Enable */
AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD1 periph A Write Enable */
AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD2 periph A Address Latch Enable */
AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD3 periph A Command Latch Enable */
AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD4 gpio Chip Enable pin pull_up */
AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD5 gpio RDY/BUSY pin pull_up */
};
};
usb2 {
pinctrl_board_usb2: usb2-board {
atmel,pins =
<AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB11 gpio vbus sense, deglitch */
};
};
};
dbgu: serial@fffff200 {
status = "okay";
};
usart0: serial@f801c000 {
status = "okay";
};
usart3: serial@f8028000 {
status = "okay";
};
spi0: spi@f0000000 {
status = "okay";
cs-gpios = <&pioA 14 0>, <&pioA 7 0>, <0>, <0>;
};
mmc0: mmc@f0008000 {
pinctrl-0 = <
&pinctrl_mmc0_slot0_clk_cmd_dat0
&pinctrl_mmc0_slot0_dat1_3>;
status = "okay";
/delete-property/dmas;
/delete-property/dma-names;
slot@0 {
reg = <0>;
bus-width = <4>;
};
};
macb0: ethernet@f802c000 {
phy-mode = "rmii";
status = "okay";
};
usb2: gadget@f803c000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_board_usb2>;
atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
status = "okay";
};
i2c1: i2c@f8014000 {
status = "okay";
};
watchdog@fffffe40 {
status = "okay";
};
shdwc@fffffe10 {
atmel,wakeup-mode = "low";
};
rtc@fffffeb0 {
status = "okay";
};
};
usb0: ohci@00600000 {
status = "okay";
num-ports = <2>;
atmel,vbus-gpio = <
&pioB 12 GPIO_ACTIVE_HIGH
&pioA 31 GPIO_ACTIVE_HIGH
>;
atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
};
usb1: ehci@00700000 {
status = "okay";
};
nand0: nand@40000000 {
nand-bus-width = <8>;
nand-ecc-mode = "hw";
atmel,has-pmecc; /* Enable PMECC */
atmel,pmecc-cap = <4>;
atmel,pmecc-sector-size = <512>;
nand-on-flash-bbt;
status = "okay";
at91bootstrap@0 {
label = "at91bs";
reg = <0x0 0x20000>;
};
uboot@20000 {
label = "u-boot";
reg = <0x20000 0x80000>;
};
ubootenv@a0000 {
label = "u-boot-env";
reg = <0xa0000 0x20000>;
};
ubootenv@c0000 {
label = "redund-env";
reg = <0xc0000 0x20000>;
};
kernel-a@e0000 {
label = "kernel-a";
reg = <0xe0000 0x280000>;
};
kernel-b@360000 {
label = "kernel-b";
reg = <0x360000 0x280000>;
};
rootfs-a@5e0000 {
label = "rootfs-a";
reg = <0x5e0000 0x2600000>;
};
rootfs-b@2be0000 {
label = "rootfs-b";
reg = <0x2be0000 0x2600000>;
};
user@51e0000 {
label = "user";
reg = <0x51e0000 0x2dc0000>;
};
logs@7fa0000 {
label = "logs";
reg = <0x7fa0000 0x60000>;
};
};
};
atheros {
compatible = "atheros,ath6kl";
atheros,board-id = "SD32";
};
keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
irqbtn@pb18 {
label = "IRQBTN";
linux,code = <99>;
gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
gpio-key,wakeup = <1>;
};
};
};

113
target/linux/at91/files/arch/arm/boot/dts/wb50n.dts
View File

@ -1,113 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* wb50n.dts - Device Tree file for wb50n board
*
* Copyright (C) 2015 Laird
*/
/dts-v1/;
#include "wb50n.dtsi"
/ {
model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
compatible = "laird,wb50n", "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk loglevel=4 mem=64M";
};
ahb {
apb {
mmc0: mmc@f0000000 {
status = "okay";
};
macb1: ethernet@f802c000 {
status = "okay";
};
dbgu: serial@ffffee00 {
status = "okay";
};
/* On BB40 this port is labeled UART1 */
usart0: serial@f001c000 {
status = "okay";
};
/* On BB40 this port is labeled UART0 */
usart1: serial@f0020000 {
status = "okay";
};
i2c0: i2c@f0014000 {
status = "okay";
};
spi1: spi@f8008000 {
status = "okay";
spidev@0 {
compatible = "spidev";
reg = <0>;
spi-max-frequency = <8000000>;
};
};
watchdog@fffffe40 {
status = "okay";
};
};
usb0: gadget@00500000 {
status = "okay";
};
usb1: ohci@00600000 {
status = "okay";
};
usb2: ehci@00700000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
btn0@pa10 {
label = "BTNESC";
linux,code = <1>; /* ESC button */
gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
gpio-key,wakeup = <1>;
};
irqbtn@pe31 {
label = "IRQBTN";
linux,code = <99>; /* SysReq button */
gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
gpio-key,wakeup = <1>;
};
};
leds {
compatible = "gpio-leds";
led0 {
label = "wb50n:blue:led0";
gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
};
led1 {
label = "wb50n:green:led1";
gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
};
led2 {
label = "wb50n:red:led2";
gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
};
};
};

205
target/linux/at91/files/arch/arm/boot/dts/wb50n.dtsi
View File

@ -1,205 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* wb50n.dts - Device Tree file for wb50n board
*
* Copyright (C) 2015 Laird
*/
#include "sama5d31.dtsi"
/ {
model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
compatible = "laird,wb50n", "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk loglevel=4 mem=64M";
};
memory {
reg = <0x20000000 0x4000000>;
};
clocks {
slow_xtal {
clock-frequency = <32768>;
};
main_xtal {
clock-frequency = <12000000>;
};
};
ahb {
apb {
pmc: pmc@fffffc00 {
main: mainck {
clock-frequency = <12000000>;
};
periphck {
usart1_clk: usart1_clk {
#clock-cells = <0>;
reg = <13>;
atmel,clk-output-range = <0 132000000>;
};
};
};
pinctrl@fffff200 {
board {
pinctrl_mmc0_cd: mmc0_cd {
atmel,pins =
<AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC26 GPIO with pullup deglitch */
};
pinctrl_usba_vbus: usba_vbus {
atmel,pins =
<AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB13 GPIO with deglitch */
};
};
};
mmc0: mmc@f0000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
cd-gpios = <&pioC 26 GPIO_ACTIVE_LOW>;
slot@0 {
reg = <0>;
bus-width = <4>;
};
};
mmc1: mmc@f8000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
status = "okay";
slot@0 {
reg = <0>;
bus-width = <4>;
};
};
macb1: ethernet@f802c000 {
phy-mode = "rmii";
};
dbgu: serial@ffffee00 {
dmas = <0>, <0>; /* Do not use DMA for dbgu */
};
/* On BB40 this port is labeled UART1 */
usart0: serial@f001c000 {
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
};
/* On BB40 this port is labeled UART0 */
usart1: serial@f0020000 {
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
dtr-gpios = <&pioD 13 GPIO_ACTIVE_LOW>;
dsr-gpios = <&pioD 11 GPIO_ACTIVE_LOW>;
dcd-gpios = <&pioD 7 GPIO_ACTIVE_LOW>;
rng-gpios = <&pioD 8 GPIO_ACTIVE_LOW>;
};
/* USART3 is direct-connect to the Bluetooth UART on the radio SIP */
usart3: serial@f8024000 {
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
status = "okay";
};
spi1: spi@f8008000 {
cs-gpios = <&pioC 25 0>, <0>, <0>, <0>;
};
sckc@fffffe50 {
slow_osc: slow_osc {
atmel,osc-bypass;
};
};
};
nand0: nand@60000000 {
nand-bus-width = <8>;
nand-ecc-mode = "hw";
atmel,has-pmecc;
atmel,pmecc-cap = <8>;
atmel,pmecc-sector-size = <512>;
nand-on-flash-bbt;
status = "okay";
at91bootstrap@0 {
label = "at91bs";
reg = <0x0 0x20000>;
};
uboot@20000 {
label = "u-boot";
reg = <0x20000 0x80000>;
};
ubootenv@a0000 {
label = "u-boot-env";
reg = <0xa0000 0x20000>;
};
ubootenv@c0000 {
label = "u-boot-env";
reg = <0xc0000 0x20000>;
};
kernel-a@e0000 {
label = "kernel-a";
reg = <0xe0000 0x500000>;
};
kernel-b@5e0000 {
label = "kernel-b";
reg = <0x5e0000 0x500000>;
};
rootfs-a@ae0000 {
label = "rootfs-a";
reg = <0xae0000 0x3000000>;
};
rootfs-b@3ae0000 {
label = "rootfs-b";
reg = <0x3ae0000 0x3000000>;
};
user@6ae0000 {
label = "user";
reg = <0x6ae0000 0x14e0000>;
};
};
usb0: gadget@00500000 {
atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
};
usb1: ohci@00600000 {
num-ports = <3>;
atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>;
atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>;
};
};
atheros {
compatible = "atheros,ath6kl";
atheros,board-id = "SD32";
};
};

1
target/linux/at91/image/sam9x.mk
View File

@ -194,6 +194,7 @@ define Device/laird_wb45n
$(Device/evaluation-fit)
DEVICE_VENDOR := Laird
DEVICE_MODEL := WB45N
DEVICE_DTS := at91-wb45n
DEVICE_PACKAGES := \
kmod-mmc-at91 kmod-ath6kl-sdio ath6k-firmware \
kmod-usb-storage kmod-fs-vfat kmod-fs-msdos \

1
target/linux/at91/image/sama5.mk
View File

@ -104,6 +104,7 @@ ifeq ($(strip $(CONFIG_EXTERNAL_KERNEL_TREE)),"")
$(Device/evaluation-fit)
DEVICE_VENDOR := Laird
DEVICE_MODEL := WB50N
DEVICE_DTS := at91-wb50n
DEVICE_PACKAGES := \
kmod-mmc-at91 kmod-ath6kl-sdio ath6k-firmware \
kmod-usb-storage kmod-fs-vfat kmod-fs-msdos \

10
target/linux/at91/patches-5.10/101-ARM-at91-build-dtb-for-q5xr5.patch Normal file
View File

@ -0,0 +1,10 @@
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -41,6 +41,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
at91-kizboxmini-mb.dtb \
at91-kizboxmini-rd.dtb \
at91-smartkiz.dtb \
+ at91-q5xr5.dtb \
at91-wb45n.dtb \
at91sam9g15ek.dtb \
at91sam9g25-gardena-smart-gateway.dtb \

10
target/linux/at91/patches-5.4/101-ARM-at91-build-dtb-for-q5xr5.patch
View File

@ -1,10 +0,0 @@
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -38,6 +38,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
at91-ariettag25.dtb \
at91-cosino_mega2560.dtb \
at91-kizboxmini.dtb \
+ at91-q5xr5.dtb \
at91-wb45n.dtb \
at91sam9g15ek.dtb \
at91sam9g25ek.dtb \

12
target/linux/at91/patches-5.4/102-ARM-at91-build-dtb-for-wb45n.patch
View File

@ -1,12 +0,0 @@
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -44,7 +44,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
at91sam9g25ek.dtb \
at91sam9g35ek.dtb \
at91sam9x25ek.dtb \
- at91sam9x35ek.dtb
+ at91sam9x35ek.dtb \
+ wb45n.dtb
dtb-$(CONFIG_SOC_SAM_V7) += \
at91-kizbox2.dtb \
at91-nattis-2-natte-2.dtb \

20
target/linux/at91/patches-5.4/102-ARM-at91-wb45n-fix-duplicate-label.patch
View File

@ -1,20 +0,0 @@
--- a/arch/arm/boot/dts/wb45n.dts
+++ b/arch/arm/boot/dts/wb45n.dts
@@ -126,7 +126,7 @@
};
};
- usb0: ohci@00600000 {
+ usb0: ohci@600000 {
status = "okay";
num-ports = <2>;
atmel,vbus-gpio = <
@@ -136,7 +136,7 @@
atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
};
- usb1: ehci@00700000 {
+ usb1: ehci@700000 {
status = "okay";
};

12
target/linux/at91/patches-5.4/103-ARM-at91-build-dtb-for-wb50n.patch
View File

@ -1,12 +0,0 @@
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -66,7 +66,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
at91-sama5d4_ma5d4evk.dtb \
at91-sama5d4_xplained.dtb \
at91-sama5d4ek.dtb \
- at91-vinco.dtb
+ at91-vinco.dtb \
+ wb50n.dtb
dtb-$(CONFIG_ARCH_ATLAS6) += \
atlas6-evb.dtb
dtb-$(CONFIG_ARCH_ATLAS7) += \

39
target/linux/at91/patches-5.4/103-ARM-at91-wb50n-fix-duplicate-label.patch
View File

@ -1,39 +0,0 @@
--- a/arch/arm/boot/dts/wb50n.dts
+++ b/arch/arm/boot/dts/wb50n.dts
@@ -60,15 +60,15 @@
};
};
- usb0: gadget@00500000 {
+ usb0: gadget@500000 {
status = "okay";
};
- usb1: ohci@00600000 {
+ usb1: ohci@600000 {
status = "okay";
};
- usb2: ehci@00700000 {
+ usb2: ehci@700000 {
status = "okay";
};
};
--- a/arch/arm/boot/dts/wb50n.dtsi
+++ b/arch/arm/boot/dts/wb50n.dtsi
@@ -185,13 +185,13 @@
};
- usb0: gadget@00500000 {
+ usb0: gadget@500000 {
atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
};
- usb1: ohci@00600000 {
+ usb1: ohci@600000 {
num-ports = <3>;
atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>;
atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>;

133
target/linux/at91/sam9x/config-default
View File

@ -1,22 +1,6 @@
CONFIG_ALIGNMENT_TRAP=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_HAS_BINFMT_FLAT=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_ARCH_HAS_DMA_WRITE_COMBINE=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_ARCH_HAS_KCOV=y
CONFIG_ARCH_HAS_KEEPINITRD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_ARCH_HAS_PHYS_TO_DMA=y
CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_AT91=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
@ -27,27 +11,37 @@ CONFIG_ARCH_MULTI_V4_V5=y
CONFIG_ARCH_MULTI_V5=y
CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARM=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_ARM_THUMB=y
CONFIG_ARM_UNWIND=y
# CONFIG_AT91RM9200_WATCHDOG is not set
# CONFIG_AT91SAM9X_WATCHDOG is not set
CONFIG_AT91_SOC_ID=y
# CONFIG_AT91_SOC_SFR is not set
CONFIG_ATMEL_AIC5_IRQ=y
CONFIG_ATMEL_AIC_IRQ=y
CONFIG_ATMEL_CLOCKSOURCE_PIT=y
CONFIG_ATMEL_CLOCKSOURCE_TCB=y
CONFIG_ATMEL_EBI=y
CONFIG_ATMEL_PIT=y
CONFIG_ATMEL_SDRAMC=y
CONFIG_ATMEL_ST=y
CONFIG_ATMEL_TCB_CLKSRC=y
# CONFIG_ATMEL_TCLIB is not set
CONFIG_AUTO_ZRELADDR=y
CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_AT91=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_CONFIGFS_FS=y
CONFIG_CPU_32v4T=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV4T=y
@ -69,9 +63,12 @@ CONFIG_CPU_USE_DOMAINS=y
CONFIG_CRC7=y
CONFIG_CRC_CCITT=y
CONFIG_CRC_ITU_T=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
CONFIG_DMA_OPS=y
CONFIG_DMA_REMAP=y
CONFIG_DTC=y
CONFIG_EDAC_ATOMIC_SCRUB=y
@ -85,56 +82,28 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PINCONF=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GLOB=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_PCI=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_UID16=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HZ_FIXED=0
CONFIG_HZ=128
CONFIG_HZ_FIXED=128
CONFIG_HZ_PERIODIC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
@ -142,10 +111,16 @@ CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_LIBFDT=y
CONFIG_LLD_VERSION=0
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_MEMFD_CREATE=y
CONFIG_MEMORY=y
# CONFIG_MFD_AT91_USART is not set
CONFIG_MFD_ATMEL_SMC=y
CONFIG_MFD_SYSCON=y
CONFIG_MIGRATION=y
CONFIG_MMC=y
# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_BLOCK=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_OF_AT91=y
@ -154,10 +129,12 @@ CONFIG_MODULES_USE_ELF_REL=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_KUSER_HELPERS=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NLS=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_KOBJ=y
CONFIG_OF_NET=y
@ -166,9 +143,21 @@ CONFIG_OLD_SIGSUSPEND3=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PINCTRL=y
CONFIG_PINCTRL_AT91=y
# CONFIG_PINCTRL_AT91PIO4 is not set
CONFIG_RATIONAL=y
CONFIG_REFCOUNT_FULL=y
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
# CONFIG_SAMA5D4_WATCHDOG is not set
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_ATMEL is not set
CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SOC_AT91RM9200=y
CONFIG_SOC_AT91SAM9=y
CONFIG_SOC_BUS=y
CONFIG_SOC_SAM9X60=y
CONFIG_SOC_SAM_V4_V5=y
CONFIG_SPARSE_IRQ=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_SRCU=y
@ -179,6 +168,24 @@ CONFIG_TIMER_PROBE=y
CONFIG_TINY_SRCU=y
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_UNWINDER_ARM=y
CONFIG_USB=y
CONFIG_USB_ACM=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
# CONFIG_USB_AT91 is not set
# CONFIG_USB_ATMEL_USBA is not set
CONFIG_USB_COMMON=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_AT91=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_ETH is not set
CONFIG_USB_GADGET=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_AT91=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
# CONFIG_VFP is not set

110
target/linux/at91/sama5/config-default
View File

@ -1,22 +1,6 @@
CONFIG_ALIGNMENT_TRAP=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_ARCH_AT91=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_HAS_BINFMT_FLAT=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_ARCH_HAS_KCOV=y
CONFIG_ARCH_HAS_KEEPINITRD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_ARCH_HAS_PHYS_TO_DMA=y
CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
@ -26,14 +10,9 @@ CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARM=y
CONFIG_ARM_AT91_CPUIDLE=y
CONFIG_ARM_CPU_SUSPEND=y
@ -50,6 +29,7 @@ CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_AT91_ADC=y
CONFIG_AT91_SAMA5D2_ADC=y
CONFIG_AT91_SOC_ID=y
# CONFIG_AT91_SOC_SFR is not set
CONFIG_ATMEL_AIC5_IRQ=y
# CONFIG_ATMEL_CLOCKSOURCE_PIT is not set
CONFIG_ATMEL_CLOCKSOURCE_TCB=y
@ -74,7 +54,6 @@ CONFIG_BLK_DEV_SD=y
CONFIG_BLK_PM=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_CACHE_L2X0=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMA=y
@ -118,29 +97,17 @@ CONFIG_CRC16=y
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_SLICEBY8=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
@ -156,6 +123,7 @@ CONFIG_DMADEVICES=y
CONFIG_DMA_CMA=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
CONFIG_DMA_OPS=y
CONFIG_DMA_REMAP=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DNOTIFY=y
@ -173,6 +141,7 @@ CONFIG_DRM_PANEL_BRIDGE=y
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_DTC=y
CONFIG_DVB_CORE=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EEPROM_AT24=y
@ -196,12 +165,14 @@ CONFIG_FORCE_MAX_ZONEORDER=15
CONFIG_FREEZER=y
CONFIG_FS_IOMAP=y
CONFIG_FS_MBCACHE=y
CONFIG_FW_CACHE=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
@ -213,6 +184,8 @@ CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_VDSO_32=y
CONFIG_GLOB=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
@ -222,53 +195,7 @@ CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_ARM_SMCCC=y
CONFIG_HAVE_AT91_AUDIO_PLL=y
CONFIG_HAVE_AT91_GENERATED_CLK=y
CONFIG_HAVE_AT91_H32MX=y
CONFIG_HAVE_AT91_I2S_MUX_CLK=y
CONFIG_HAVE_AT91_SMD=y
CONFIG_HAVE_AT91_USB_CLK=y
CONFIG_HAVE_AT91_UTMI=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_PCI=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_SMP=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_UID16=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HDMI=y
CONFIG_HID=y
CONFIG_HID_GENERIC=y
@ -301,6 +228,7 @@ CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_JBD2=y
# CONFIG_JFFS2_FS is not set
CONFIG_KCMP=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_XZ is not set
CONFIG_KEXEC=y
@ -312,19 +240,28 @@ CONFIG_LEDS_PWM=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LIBFDT=y
CONFIG_LLD_VERSION=0
CONFIG_LOCALVERSION_AUTO=y
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MACB=y
CONFIG_MACB_USE_HWSTAMP=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_DEVRES=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_MEMFD_CREATE=y
CONFIG_MEMORY=y
@ -386,6 +323,7 @@ CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_PHYLINK=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_PINCTRL_AT91PIO4=y
@ -411,7 +349,6 @@ CONFIG_PWM_ATMEL_HLCDC_PWM=y
CONFIG_PWM_ATMEL_TCB=y
CONFIG_PWM_SYSFS=y
CONFIG_RATIONAL=y
CONFIG_REFCOUNT_FULL=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
@ -457,6 +394,8 @@ CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_MCHP_SOC_I2S_MCC is not set
# CONFIG_SND_MCHP_SOC_SPDIFRX is not set
# CONFIG_SND_MCHP_SOC_SPDIFTX is not set
CONFIG_SND_PCM=y
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_SOC=y
@ -511,11 +450,13 @@ CONFIG_USB_ACM=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
# CONFIG_USB_AT91 is not set
# CONFIG_USB_ATMEL_USBA is not set
# CONFIG_USB_AUDIO is not set
CONFIG_USB_COMMON=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_AT91=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_ETH is not set
CONFIG_USB_GADGET=y
CONFIG_USB_HID=y
CONFIG_USB_OHCI_HCD=y
@ -534,6 +475,7 @@ CONFIG_VFAT_FS=y
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_VIDEOMODE_HELPERS=y
# CONFIG_VIDEO_ATMEL_ISC is not set
# CONFIG_VIDEO_ATMEL_ISI is not set
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_VIDEO_DEV=y