ath79: mikrotik: extract common bits for RB951x-2HnD devices

Mikrotik RouterBOARD 951Ui-2HnD and Mikrotik RouterBOARD RB951G-2HnD are
very similar devices.  Extract the DTS bits that are identical for these
two boards to a separate DTSI file.

Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
(cherry picked from commit c6ef417094)
This commit is contained in:
Michał Kępień 2023-06-15 15:59:44 +02:00 committed by Hauke Mehrtens
parent a4792d79e8
commit 7bb616d300
2 changed files with 83 additions and 80 deletions

View File

@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9344_mikrotik_routerboard.dtsi"
#include "ar9344_mikrotik_routerboard-951x-2hnd.dtsi"
/ {
compatible = "mikrotik,routerboard-951ui-2hnd", "qca,ar9344";
@ -59,77 +59,6 @@
};
};
&gpio {
nand_power {
gpio-hog;
gpios = <14 GPIO_ACTIVE_LOW>;
output-high;
};
};
&nand {
status = "okay";
nand-ecc-mode = "soft";
qca,nand-swap-dma;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "booter";
reg = <0x0000000 0x0040000>;
read-only;
};
partition@40000 {
label = "kernel";
reg = <0x0040000 0x03c0000>;
};
partition@400000 {
label = "ubi";
reg = <0x0400000 0x7c00000>;
};
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "mikrotik,routerboot-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "routerboot";
reg = <0x0 0x0>;
read-only;
};
hard_config: hard_config {
read-only;
};
bios {
size = <0x1000>;
read-only;
};
soft_config {
};
};
};
};
&eth0 {
phy-handle = <&swphy4>;
@ -143,11 +72,3 @@
&wmac {
qca,led-pin = /bits/ 8 <11>;
};
&usb {
status = "okay";
};
&usb_phy {
status = "okay";
};

View File

@ -0,0 +1,82 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9344_mikrotik_routerboard.dtsi"
&gpio {
nand_power {
gpio-hog;
gpios = <14 GPIO_ACTIVE_LOW>;
output-high;
};
};
&nand {
status = "okay";
nand-ecc-mode = "soft";
qca,nand-swap-dma;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "booter";
reg = <0x0000000 0x0040000>;
read-only;
};
partition@40000 {
label = "kernel";
reg = <0x0040000 0x03c0000>;
};
partition@400000 {
label = "ubi";
reg = <0x0400000 0x7c00000>;
};
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "mikrotik,routerboot-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "routerboot";
reg = <0x0 0x0>;
read-only;
};
hard_config: hard_config {
read-only;
};
bios {
size = <0x1000>;
read-only;
};
soft_config {
};
};
};
};
&usb {
status = "okay";
};
&usb_phy {
status = "okay";
};