diff --git a/package/boot/uboot-rockchip/Makefile b/package/boot/uboot-rockchip/Makefile index 307fcff5f7f..d127d7108d4 100644 --- a/package/boot/uboot-rockchip/Makefile +++ b/package/boot/uboot-rockchip/Makefile @@ -213,6 +213,22 @@ define U-Boot/rock-3a-rk3568 radxa_rock-3a endef +# RK3588 boards + +define U-Boot/Default/rk3588 + BUILD_SUBTARGET:=armv8 + DEPENDS:=+PACKAGE_u-boot-$(1):trusted-firmware-a-rk3588 + ATF:=rk3588_bl31_v1.45.elf + TPL:=rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.16.bin +endef + +define U-Boot/nanopi-r6s-rk3588s + $(U-Boot/Default/rk3588) + NAME:=NanoPi R6S + BUILD_DEVICES:= \ + friendlyarm_nanopi-r6s +endef + UBOOT_TARGETS := \ nanopc-t4-rk3399 \ nanopi-r4s-rk3399 \ @@ -233,7 +249,8 @@ UBOOT_TARGETS := \ nanopi-r5c-rk3568 \ nanopi-r5s-rk3568 \ radxa-e25-rk3568 \ - rock-3a-rk3568 + rock-3a-rk3568 \ + nanopi-r6s-rk3588s UBOOT_CONFIGURE_VARS += USE_PRIVATE_LIBGCC=yes diff --git a/package/boot/uboot-rockchip/patches/106-board-rockchip-Add-FriendlyElec-NanoPi-R6S.patch b/package/boot/uboot-rockchip/patches/106-board-rockchip-Add-FriendlyElec-NanoPi-R6S.patch new file mode 100644 index 00000000000..68958d87c94 --- /dev/null +++ b/package/boot/uboot-rockchip/patches/106-board-rockchip-Add-FriendlyElec-NanoPi-R6S.patch @@ -0,0 +1,193 @@ +From 7db9ff164813afb343024d37731ab797ed7f507e Mon Sep 17 00:00:00 2001 +From: Sebastian Kropatsch +Date: Thu, 11 Jul 2024 12:15:18 +0200 +Subject: [PATCH] board: rockchip: Add FriendlyElec NanoPi R6S + +The NanoPi R6S is a SBC by FriendlyElec based on the Rockchip RK3588s. +It comes with 4GB or 8GB of RAM, a microSD card slot, 32GB eMMC storage, +one RTL8211F 1GbE and two RTL8125 2.5GbE Ethernet ports, one USB 2.0 +Type-A and one USB 3.0 Type-A port, a HDMI port, a 12-pin GPIO FPC +connector, a fan connector, IR receiver as well as some buttons and LEDs. + +Add initial support for this board using the upstream devicetree sources. + +Kernel commit: +f1b11f43b3e9 ("arm64: dts: rockchip: Add support for NanoPi R6S") + +Reviewed-by: Kever Yang +Signed-off-by: Sebastian Kropatsch +--- + arch/arm/dts/rk3588s-nanopi-r6s-u-boot.dtsi | 3 + + arch/arm/mach-rockchip/rk3588/Kconfig | 13 +++ + board/friendlyelec/nanopi-r6s-rk3588s/Kconfig | 12 +++ + .../nanopi-r6s-rk3588s/MAINTAINERS | 7 ++ + configs/nanopi-r6s-rk3588s_defconfig | 82 +++++++++++++++++++ + doc/board/rockchip/rockchip.rst | 1 + + include/configs/nanopi-r6s-rk3588s.h | 12 +++ + 7 files changed, 130 insertions(+) + create mode 100644 arch/arm/dts/rk3588s-nanopi-r6s-u-boot.dtsi + create mode 100644 board/friendlyelec/nanopi-r6s-rk3588s/Kconfig + create mode 100644 board/friendlyelec/nanopi-r6s-rk3588s/MAINTAINERS + create mode 100644 configs/nanopi-r6s-rk3588s_defconfig + create mode 100644 include/configs/nanopi-r6s-rk3588s.h + +--- /dev/null ++++ b/arch/arm/dts/rk3588s-nanopi-r6s-u-boot.dtsi +@@ -0,0 +1,3 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++ ++#include "rk3588s-u-boot.dtsi" +--- a/arch/arm/mach-rockchip/rk3588/Kconfig ++++ b/arch/arm/mach-rockchip/rk3588/Kconfig +@@ -78,6 +78,18 @@ config TARGET_NANOPCT6_RK3588 + Power: 5.5*2.1mm DC Jack, 12VDC input + Dimensions: 110x80x1.6mm (without case) / 86x114.5x30mm (with case) + ++config TARGET_NANOPI_R6S_RK3588S ++ bool "FriendlyElec NanoPi R6S" ++ select BOARD_LATE_INIT ++ help ++ The NanoPi R6S is a SBC by FriendlyElec based on the Rockchip ++ RK3588s. ++ It comes with 4GB or 8GB of RAM, a microSD card slot, 32GB eMMC ++ storage, one RTL8211F 1GbE and two RTL8125 2.5GbE Ethernet ports, ++ one USB 2.0 Type-A and one USB 3.0 Type-A port, a HDMI port, a ++ 12-pin GPIO FPC connector, a fan connector, IR receiver as well ++ as some buttons and LEDs. ++ + config TARGET_NOVA_RK3588 + bool "Indiedroid Nova RK3588" + select BOARD_LATE_INIT +@@ -232,6 +244,7 @@ config TEXT_BASE + + source "board/edgeble/neural-compute-module-6/Kconfig" + source "board/friendlyelec/nanopc-t6-rk3588/Kconfig" ++source "board/friendlyelec/nanopi-r6s-rk3588s/Kconfig" + source "board/indiedroid/nova/Kconfig" + source "board/pine64/quartzpro64-rk3588/Kconfig" + source "board/turing/turing-rk1-rk3588/Kconfig" +--- /dev/null ++++ b/board/friendlyelec/nanopi-r6s-rk3588s/Kconfig +@@ -0,0 +1,12 @@ ++if TARGET_NANOPI_R6S_RK3588S ++ ++config SYS_BOARD ++ default "nanopi-r6s-rk3588s" ++ ++config SYS_VENDOR ++ default "friendlyelec" ++ ++config SYS_CONFIG_NAME ++ default "nanopi-r6s-rk3588s" ++ ++endif +--- /dev/null ++++ b/board/friendlyelec/nanopi-r6s-rk3588s/MAINTAINERS +@@ -0,0 +1,7 @@ ++NANOPI-R6S ++M: Sebastian Kropatsch ++S: Maintained ++F: arch/arm/dts/rk3588s-nanopi-r6s-u-boot.dtsi ++F: board/friendlyelec/nanopi-r6s-rk3588s ++F: configs/nanopi-r6s-rk3588s_defconfig ++F: include/configs/nanopi-r6s-rk3588s.h +--- /dev/null ++++ b/configs/nanopi-r6s-rk3588s_defconfig +@@ -0,0 +1,82 @@ ++CONFIG_ARM=y ++CONFIG_SKIP_LOWLEVEL_INIT=y ++CONFIG_SYS_HAS_NONCACHED_MEMORY=y ++CONFIG_COUNTER_FREQUENCY=24000000 ++CONFIG_ARCH_ROCKCHIP=y ++CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588s-nanopi-r6s" ++CONFIG_ROCKCHIP_RK3588=y ++CONFIG_SPL_SERIAL=y ++CONFIG_TARGET_NANOPI_R6S_RK3588S=y ++CONFIG_DEBUG_UART_BASE=0xFEB50000 ++CONFIG_DEBUG_UART_CLOCK=24000000 ++CONFIG_SYS_LOAD_ADDR=0xc00800 ++CONFIG_PCI=y ++CONFIG_DEBUG_UART=y ++CONFIG_FIT=y ++CONFIG_FIT_VERBOSE=y ++CONFIG_SPL_FIT_SIGNATURE=y ++CONFIG_SPL_LOAD_FIT=y ++CONFIG_LEGACY_IMAGE_FORMAT=y ++CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588s-nanopi-r6s.dtb" ++# CONFIG_DISPLAY_CPUINFO is not set ++CONFIG_DISPLAY_BOARDINFO_LATE=y ++CONFIG_SPL_MAX_SIZE=0x40000 ++CONFIG_SPL_PAD_TO=0x7f8000 ++# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set ++CONFIG_SPL_ATF=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_PWM=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_I2C=y ++CONFIG_CMD_MMC=y ++CONFIG_CMD_PCI=y ++CONFIG_CMD_USB=y ++CONFIG_CMD_ROCKUSB=y ++# CONFIG_CMD_SETEXPR is not set ++CONFIG_CMD_REGULATOR=y ++# CONFIG_SPL_DOS_PARTITION is not set ++CONFIG_SPL_OF_CONTROL=y ++CONFIG_OF_LIVE=y ++CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" ++CONFIG_SPL_DM_SEQ_ALIAS=y ++CONFIG_SPL_REGMAP=y ++CONFIG_SPL_SYSCON=y ++CONFIG_SPL_CLK=y ++# CONFIG_USB_FUNCTION_FASTBOOT is not set ++CONFIG_ROCKCHIP_GPIO=y ++CONFIG_SYS_I2C_ROCKCHIP=y ++CONFIG_MISC=y ++CONFIG_SUPPORT_EMMC_RPMB=y ++CONFIG_MMC_DW=y ++CONFIG_MMC_DW_ROCKCHIP=y ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_SDMA=y ++CONFIG_MMC_SDHCI_ROCKCHIP=y ++# CONFIG_SPI_FLASH is not set ++CONFIG_PHY_REALTEK=y ++CONFIG_DWC_ETH_QOS=y ++CONFIG_DWC_ETH_QOS_ROCKCHIP=y ++CONFIG_RTL8169=y ++CONFIG_PCIE_DW_ROCKCHIP=y ++CONFIG_PHY_ROCKCHIP_INNO_USB2=y ++CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y ++CONFIG_PHY_ROCKCHIP_USBDP=y ++CONFIG_SPL_PINCTRL=y ++CONFIG_PWM_ROCKCHIP=y ++CONFIG_SPL_RAM=y ++CONFIG_BAUDRATE=1500000 ++CONFIG_DEBUG_UART_SHIFT=2 ++CONFIG_SYS_NS16550_MEM32=y ++CONFIG_SYSRESET=y ++CONFIG_USB=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_USB_EHCI_GENERIC=y ++CONFIG_USB_OHCI_HCD=y ++CONFIG_USB_OHCI_GENERIC=y ++CONFIG_USB_DWC3=y ++CONFIG_USB_DWC3_GENERIC=y ++CONFIG_USB_GADGET=y ++CONFIG_USB_GADGET_DOWNLOAD=y ++CONFIG_USB_FUNCTION_ROCKUSB=y ++CONFIG_ERRNO_STR=y +--- /dev/null ++++ b/include/configs/nanopi-r6s-rk3588s.h +@@ -0,0 +1,12 @@ ++/* SPDX-License-Identifier: GPL-2.0+ */ ++ ++#ifndef __NANOPI_R6S_RK3588S_H ++#define __NANOPI_R6S_RK3588S_H ++ ++#define ROCKCHIP_DEVICE_SETTINGS \ ++ "stdout=serial,vidconsole\0" \ ++ "stderr=serial,vidconsole\0" ++ ++#include ++ ++#endif /* __NANOPI_R6S_RK3588S_H */