diff --git a/package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic index e82fb868cdb..2376ed2e9d4 100644 --- a/package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic +++ b/package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic @@ -111,6 +111,7 @@ gatonetworks,gdsp) glinet,gl-mt3000) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000" ;; +mercusys,mr80x-v3|\ mercusys,mr90x-v1|\ routerich,ax3000|\ tenbay,wr3000k|\ diff --git a/target/linux/mediatek/dts/mt7981b-mercusys-mr80x-v3.dts b/target/linux/mediatek/dts/mt7981b-mercusys-mr80x-v3.dts new file mode 100755 index 00000000000..3bd59f75a62 --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-mercusys-mr80x-v3.dts @@ -0,0 +1,237 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; +#include +#include + +#include "mt7981.dtsi" +/ { + model = "MERCUSYS MR80X v3"; + compatible = "mercusys,mr80x-v3", "mediatek,mt7981"; + + aliases { + led-boot = &led_status_green; + led-failsafe = &led_status_amber; + led-running = &led_status_green; + led-upgrade = &led_status_green; + + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0 0x40000000 0 0x20000000>; + }; + + keys { + compatible = "gpio-keys"; + + button-reset { + label = "reset"; + linux,code = ; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status_amber: led-0 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 4 GPIO_ACTIVE_LOW>; + }; + + led_status_green: led-1 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 5 GPIO_ACTIVE_LOW>; + }; + + led-2 { + color = ; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + gpios = <&pio 6 GPIO_ACTIVE_LOW>; + }; + + led-3 { + color = ; + function = LED_FUNCTION_LAN; + function-enumerator = <2>; + gpios = <&pio 7 GPIO_ACTIVE_LOW>; + }; + + led-4 { + color = ; + function = LED_FUNCTION_WAN; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + }; + + led-5 { + color = ; + function = LED_FUNCTION_LAN; + function-enumerator = <3>; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "gmii"; + phy-handle = <&int_gbe_phy>; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + switch@1f { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + status = "okay"; + + spi_nand: spi_nand@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <52000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x00000 0x0200000>; + read-only; + }; + + partition@200000 { + label = "u-boot-env"; + reg = <0x0200000 0x0100000>; + }; + + partition@300000 { + label = "ubi0"; + reg = <0x300000 0x3200000>; + }; + + partition@3500000 { + label = "ubi1"; + reg = <0x3500000 0x3200000>; + read-only; + }; + + partition@6700000 { + label = "userconfig"; + reg = <0x6700000 0x800000>; + read-only; + }; + + partition@6f00000 { + label = "tp_data"; + reg = <0x6f00000 0x800000>; + read-only; + }; + }; + }; +}; + +&pio { + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = ; + bias-pull-up = ; + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = ; + bias-pull-down = ; + }; + }; +}; + +&wifi { + status = "okay"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds index fe4f944bf31..58ee1ad6196 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds @@ -72,6 +72,12 @@ glinet,gl-xe3000) huasifei,wh3000) ucidef_set_led_netdev "wan" "WAN" "red:wan" "eth1" "link tx rx" ;; +mercusys,mr80x-v3) + ucidef_set_led_netdev "lan1" "lan-1" "green:lan-1" "lan1" "link tx rx" + ucidef_set_led_netdev "lan2" "lan-2" "green:lan-2" "lan2" "link tx rx" + ucidef_set_led_netdev "lan3" "lan-3" "green:lan-3" "lan3" "link tx rx" + ucidef_set_led_netdev "wan" "wan" "green:wan" "wan" "link tx rx" + ;; mercusys,mr90x-v1|\ mercusys,mr90x-v1-ubi) ucidef_set_led_netdev "lan-0" "lan-0" "green:lan-0" "lan0" "link tx rx" diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 5592e95dbbc..c81e70e19b8 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -13,6 +13,7 @@ mediatek_setup_interfaces() h3c,magic-nx30-pro|\ netis,nx31|\ nokia,ea0326gmp|\ + mercusys,mr80x-v3|\ zbtlink,zbt-z8103ax) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1 ;; @@ -169,6 +170,12 @@ mediatek_setup_macs() lan_mac=$(macaddr_add "$wan_mac" 1) label_mac=$wan_mac ;; + mercusys,mr80x-v3) + mac_dirty=$(cat "/tmp/tp_data/default-mac" | sed -n 's/^'"MAC"'://p') + label_mac=$(macaddr_canonicalize "$mac_dirty") + lan_mac=$label_mac + wan_mac=$(macaddr_add "$lan_mac" 1) + ;; mercusys,mr90x-v1|\ tplink,re6000xd) label_mac=$(get_mac_binary "/tmp/tp_data/default-mac" 0) diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata index 8456c462b63..34aacb93127 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/firmware/11-mt76-caldata @@ -9,6 +9,10 @@ board=$(board_name) case "$FIRMWARE" in "mediatek/mt7981_eeprom_mt7976_dbdc.bin") case "$board" in + mercusys,mr80x-v3) + ln -sf /tmp/tp_data/MT7981_EEPROM.bin \ + /lib/firmware/$FIRMWARE + ;; ubnt,unifi-6-plus) caldata_extract_mmc "factory" 0x0 0x1000 ;; diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index e7b512b7794..22e6e45436b 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -119,6 +119,12 @@ case "$board" in [ "$PHYNBR" = "1" ] && \ macaddr_setbit_la "$(mtd_get_mac_binary rf-eeprom 0x4)" > /sys${DEVPATH}/macaddress ;; + mercusys,mr80x-v3) + mac_dirty=$(cat "/tmp/tp_data/default-mac" | sed -n 's/^'"MAC"'://p') + label_mac=$(macaddr_canonicalize "$mac_dirty") + [ "$PHYNBR" = "0" ] && macaddr_add $label_mac -1 > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && macaddr_add $label_mac -2 > /sys${DEVPATH}/macaddress + ;; mercusys,mr90x-v1|\ tplink,re6000xd) addr=$(get_mac_binary "/tmp/tp_data/default-mac" 0) diff --git a/target/linux/mediatek/filogic/base-files/lib/preinit/09_mount_cfg_part b/target/linux/mediatek/filogic/base-files/lib/preinit/09_mount_cfg_part index 11e3b598af8..1474fad831c 100644 --- a/target/linux/mediatek/filogic/base-files/lib/preinit/09_mount_cfg_part +++ b/target/linux/mediatek/filogic/base-files/lib/preinit/09_mount_cfg_part @@ -12,6 +12,7 @@ mount_ubi_part() { preinit_mount_cfg_part() { case $(board_name) in + mercusys,mr80x-v3|\ mercusys,mr90x-v1|\ tplink,re6000xd) mount_ubi_part "tp_data" diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index 176da9700b6..c40fe825c23 100755 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -140,6 +140,7 @@ platform_do_upgrade() { fw_setenv sw_tryactive 0 nand_do_upgrade "$1" ;; + mercusys,mr80x-v3|\ mercusys,mr90x-v1|\ tplink,re6000xd) CI_UBIPART="ubi0" diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index f6248bd31c0..b2edaa389de 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -1221,6 +1221,20 @@ define Device/mediatek_mt7988a-rfb endef TARGET_DEVICES += mediatek_mt7988a-rfb +define Device/mercusys_mr80x-v3 + DEVICE_VENDOR := MERCUSYS + DEVICE_MODEL := MR80X + DEVICE_VARIANT := v3 + DEVICE_DTS := mt7981b-mercusys-mr80x-v3 + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += mercusys_mr80x-v3 + define Device/mercusys_mr90x-v1 DEVICE_VENDOR := MERCUSYS DEVICE_MODEL := MR90X v1