From 78b6931a1a3807333e4c50b746df2e59fed176b0 Mon Sep 17 00:00:00 2001 From: Florian Eckert Date: Tue, 9 Apr 2019 10:52:03 +0200 Subject: [PATCH] wireguard: converted whitespaces from space to tab With this change, the file is reduced from 5186 bytes to 4649 bytes that its approximately 10.5 percent less memory consumption. For small devices, sometimes every byte counts. Also, all other protocol handler use tabs instead of spaces. Signed-off-by: Florian Eckert --- .../services/wireguard/files/wireguard.sh | 311 +++++++++--------- 1 file changed, 152 insertions(+), 159 deletions(-) diff --git a/package/network/services/wireguard/files/wireguard.sh b/package/network/services/wireguard/files/wireguard.sh index fb781070d6c..cc49c2daf0c 100644 --- a/package/network/services/wireguard/files/wireguard.sh +++ b/package/network/services/wireguard/files/wireguard.sh @@ -2,200 +2,193 @@ # Copyright 2016-2017 Dan Luedtke # Licensed to the public under the Apache License 2.0. - WG=/usr/bin/wg if [ ! -x $WG ]; then - logger -t "wireguard" "error: missing wireguard-tools (${WG})" - exit 0 + logger -t "wireguard" "error: missing wireguard-tools (${WG})" + exit 0 fi - [ -n "$INCLUDE_ONLY" ] || { - . /lib/functions.sh - . ../netifd-proto.sh - init_proto "$@" + . /lib/functions.sh + . ../netifd-proto.sh + init_proto "$@" } - proto_wireguard_init_config() { - proto_config_add_string "private_key" - proto_config_add_int "listen_port" - proto_config_add_int "mtu" - proto_config_add_string "fwmark" - available=1 - no_proto_task=1 + proto_config_add_string "private_key" + proto_config_add_int "listen_port" + proto_config_add_int "mtu" + proto_config_add_string "fwmark" + available=1 + no_proto_task=1 } - proto_wireguard_setup_peer() { - local peer_config="$1" + local peer_config="$1" - local public_key - local preshared_key - local allowed_ips - local route_allowed_ips - local endpoint_host - local endpoint_port - local persistent_keepalive + local public_key + local preshared_key + local allowed_ips + local route_allowed_ips + local endpoint_host + local endpoint_port + local persistent_keepalive - config_get public_key "${peer_config}" "public_key" - config_get preshared_key "${peer_config}" "preshared_key" - config_get allowed_ips "${peer_config}" "allowed_ips" - config_get_bool route_allowed_ips "${peer_config}" "route_allowed_ips" 0 - config_get endpoint_host "${peer_config}" "endpoint_host" - config_get endpoint_port "${peer_config}" "endpoint_port" - config_get persistent_keepalive "${peer_config}" "persistent_keepalive" + config_get public_key "${peer_config}" "public_key" + config_get preshared_key "${peer_config}" "preshared_key" + config_get allowed_ips "${peer_config}" "allowed_ips" + config_get_bool route_allowed_ips "${peer_config}" "route_allowed_ips" 0 + config_get endpoint_host "${peer_config}" "endpoint_host" + config_get endpoint_port "${peer_config}" "endpoint_port" + config_get persistent_keepalive "${peer_config}" "persistent_keepalive" - # peer configuration - echo "[Peer]" >> "${wg_cfg}" - echo "PublicKey=${public_key}" >> "${wg_cfg}" - if [ "${preshared_key}" ]; then - echo "PresharedKey=${preshared_key}" >> "${wg_cfg}" - fi - for allowed_ip in $allowed_ips; do - echo "AllowedIPs=${allowed_ip}" >> "${wg_cfg}" - done - if [ "${endpoint_host}" ]; then - case "${endpoint_host}" in - *:*) - endpoint="[${endpoint_host}]" - ;; - *) - endpoint="${endpoint_host}" - ;; - esac - if [ "${endpoint_port}" ]; then - endpoint="${endpoint}:${endpoint_port}" - else - endpoint="${endpoint}:51820" - fi - echo "Endpoint=${endpoint}" >> "${wg_cfg}" - fi - if [ "${persistent_keepalive}" ]; then - echo "PersistentKeepalive=${persistent_keepalive}" >> "${wg_cfg}" - fi + # peer configuration + echo "[Peer]" >> "${wg_cfg}" + echo "PublicKey=${public_key}" >> "${wg_cfg}" + if [ "${preshared_key}" ]; then + echo "PresharedKey=${preshared_key}" >> "${wg_cfg}" + fi + for allowed_ip in $allowed_ips; do + echo "AllowedIPs=${allowed_ip}" >> "${wg_cfg}" + done + if [ "${endpoint_host}" ]; then + case "${endpoint_host}" in + *:*) + endpoint="[${endpoint_host}]" + ;; + *) + endpoint="${endpoint_host}" + ;; + esac + if [ "${endpoint_port}" ]; then + endpoint="${endpoint}:${endpoint_port}" + else + endpoint="${endpoint}:51820" + fi + echo "Endpoint=${endpoint}" >> "${wg_cfg}" + fi + if [ "${persistent_keepalive}" ]; then + echo "PersistentKeepalive=${persistent_keepalive}" >> "${wg_cfg}" + fi - # add routes for allowed ips - if [ ${route_allowed_ips} -ne 0 ]; then - for allowed_ip in ${allowed_ips}; do - case "${allowed_ip}" in - *:*/*) - proto_add_ipv6_route "${allowed_ip%%/*}" "${allowed_ip##*/}" - ;; - *.*/*) - proto_add_ipv4_route "${allowed_ip%%/*}" "${allowed_ip##*/}" - ;; - *:*) - proto_add_ipv6_route "${allowed_ip%%/*}" "128" - ;; - *.*) - proto_add_ipv4_route "${allowed_ip%%/*}" "32" - ;; - esac - done - fi + # add routes for allowed ips + if [ ${route_allowed_ips} -ne 0 ]; then + for allowed_ip in ${allowed_ips}; do + case "${allowed_ip}" in + *:*/*) + proto_add_ipv6_route "${allowed_ip%%/*}" "${allowed_ip##*/}" + ;; + *.*/*) + proto_add_ipv4_route "${allowed_ip%%/*}" "${allowed_ip##*/}" + ;; + *:*) + proto_add_ipv6_route "${allowed_ip%%/*}" "128" + ;; + *.*) + proto_add_ipv4_route "${allowed_ip%%/*}" "32" + ;; + esac + done + fi } - proto_wireguard_setup() { - local config="$1" - local wg_dir="/tmp/wireguard" - local wg_cfg="${wg_dir}/${config}" + local config="$1" + local wg_dir="/tmp/wireguard" + local wg_cfg="${wg_dir}/${config}" - local private_key - local listen_port - local mtu + local private_key + local listen_port + local mtu - # load configuration - config_load network - config_get private_key "${config}" "private_key" - config_get listen_port "${config}" "listen_port" - config_get addresses "${config}" "addresses" - config_get mtu "${config}" "mtu" - config_get fwmark "${config}" "fwmark" - config_get ip6prefix "${config}" "ip6prefix" - config_get nohostroute "${config}" "nohostroute" + # load configuration + config_load network + config_get private_key "${config}" "private_key" + config_get listen_port "${config}" "listen_port" + config_get addresses "${config}" "addresses" + config_get mtu "${config}" "mtu" + config_get fwmark "${config}" "fwmark" + config_get ip6prefix "${config}" "ip6prefix" + config_get nohostroute "${config}" "nohostroute" - # create interface - ip link del dev "${config}" 2>/dev/null - ip link add dev "${config}" type wireguard + # create interface + ip link del dev "${config}" 2>/dev/null + ip link add dev "${config}" type wireguard - if [ "${mtu}" ]; then - ip link set mtu "${mtu}" dev "${config}" - fi + if [ "${mtu}" ]; then + ip link set mtu "${mtu}" dev "${config}" + fi - proto_init_update "${config}" 1 + proto_init_update "${config}" 1 - # generate configuration file - umask 077 - mkdir -p "${wg_dir}" - echo "[Interface]" > "${wg_cfg}" - echo "PrivateKey=${private_key}" >> "${wg_cfg}" - if [ "${listen_port}" ]; then - echo "ListenPort=${listen_port}" >> "${wg_cfg}" - fi - if [ "${fwmark}" ]; then - echo "FwMark=${fwmark}" >> "${wg_cfg}" - fi - config_foreach proto_wireguard_setup_peer "wireguard_${config}" + # generate configuration file + umask 077 + mkdir -p "${wg_dir}" + echo "[Interface]" > "${wg_cfg}" + echo "PrivateKey=${private_key}" >> "${wg_cfg}" + if [ "${listen_port}" ]; then + echo "ListenPort=${listen_port}" >> "${wg_cfg}" + fi + if [ "${fwmark}" ]; then + echo "FwMark=${fwmark}" >> "${wg_cfg}" + fi + config_foreach proto_wireguard_setup_peer "wireguard_${config}" - # apply configuration file - ${WG} setconf ${config} "${wg_cfg}" - WG_RETURN=$? + # apply configuration file + ${WG} setconf ${config} "${wg_cfg}" + WG_RETURN=$? - # delete configuration file - rm -f "${wg_cfg}" + # delete configuration file + rm -f "${wg_cfg}" - # check status - if [ ${WG_RETURN} -ne 0 ]; then - sleep 5 - proto_setup_failed "${config}" - exit 1 - fi + # check status + if [ ${WG_RETURN} -ne 0 ]; then + sleep 5 + proto_setup_failed "${config}" + exit 1 + fi - # add ip addresses - for address in ${addresses}; do - case "${address}" in - *:*/*) - proto_add_ipv6_address "${address%%/*}" "${address##*/}" - ;; - *.*/*) - proto_add_ipv4_address "${address%%/*}" "${address##*/}" - ;; - *:*) - proto_add_ipv6_address "${address%%/*}" "128" - ;; - *.*) - proto_add_ipv4_address "${address%%/*}" "32" - ;; - esac - done + # add ip addresses + for address in ${addresses}; do + case "${address}" in + *:*/*) + proto_add_ipv6_address "${address%%/*}" "${address##*/}" + ;; + *.*/*) + proto_add_ipv4_address "${address%%/*}" "${address##*/}" + ;; + *:*) + proto_add_ipv6_address "${address%%/*}" "128" + ;; + *.*) + proto_add_ipv4_address "${address%%/*}" "32" + ;; + esac + done - # support ip6 prefixes - for prefix in ${ip6prefix}; do - proto_add_ipv6_prefix "$prefix" - done + # support ip6 prefixes + for prefix in ${ip6prefix}; do + proto_add_ipv6_prefix "$prefix" + done - # endpoint dependency - if [ "${nohostroute}" != "1" ]; then - wg show "${config}" endpoints | \ - sed -E 's/\[?([0-9.:a-f]+)\]?:([0-9]+)/\1 \2/' | \ - while IFS=$'\t ' read -r key address port; do - [ -n "${port}" ] || continue - proto_add_host_dependency "${config}" "${address}" - done - fi + # endpoint dependency + if [ "${nohostroute}" != "1" ]; then + wg show "${config}" endpoints | \ + sed -E 's/\[?([0-9.:a-f]+)\]?:([0-9]+)/\1 \2/' | \ + while IFS=$'\t ' read -r key address port; do + [ -n "${port}" ] || continue + proto_add_host_dependency "${config}" "${address}" + done + fi - proto_send_update "${config}" + proto_send_update "${config}" } - proto_wireguard_teardown() { - local config="$1" - ip link del dev "${config}" >/dev/null 2>&1 + local config="$1" + ip link del dev "${config}" >/dev/null 2>&1 } - [ -n "$INCLUDE_ONLY" ] || { - add_protocol wireguard + add_protocol wireguard }