ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-01-22 04:18:10 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity

ath79: move small-flash Engenius boards to tiny

Browse Source 
This moves some of the Engenius boards from generic to tiny:

 - EAP350 v1
 - ECB350 v1
 - ENH202 v1

For these, factory.bin builds are already failing on master
branch because of the unique situation for these boards:

 - 8 MB flash
 - an extra "failsafe" image for recovery
 - TFTP does not work (barely possible with 600 MTU)
 - bootloader loads image from a longer flash offset
 - 1 eraseblock each needed for OKLI kernel loader and fake rootfs
 - using mtd-concat to make use of remaining space...

The manual alternative would be removing the failsafe partition.
However this comes with the risk of extremely difficult recovery
if a flash ever fails because TFTP on the bootloader is bugged.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
[improve commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: maurerr <mariusd84@gmail.com>
This commit is contained in:
Michael Pratt 2021-01-01 16:48:52 -05:00 committed by maurerr
parent f7592a5e8a
commit 76602ef889
9 changed files with 104 additions and 100 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
target/linux/ath79/generic/base-files/etc/board.d/01_leds
View File

@ -182,14 +182,6 @@ dlink,dap-1365-a1)
dlink,dir-859-a1)
ucidef_set_led_switch "internet" "WAN" "green:internet" "switch0" "0x20"
;;
engenius,enh202-v1)
ucidef_set_led_switch "lan" "LAN" "amber:lan" "switch0" "0x10"
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth0"
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "red:rssilow" "wlan0" "1" "100"
ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "amber:rssimedium" "wlan0" "33" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssihigh" "wlan0" "67" "100"
;;
engenius,ens202ext-v1|\
engenius,enstationac-v1)
ucidef_set_rssimon "wlan0" "200000" "1"

32
target/linux/ath79/generic/base-files/etc/board.d/02_network
View File

@ -33,11 +33,9 @@ ath79_setup_interfaces()
dlink,dap-3320-a1|\
dlink,dir-505|\
engenius,eap300-v2|\
engenius,eap350-v1|\
engenius,eap600|\
engenius,ecb1200|\
engenius,ecb1750|\
engenius,ecb350-v1|\
engenius,ecb600|\
enterasys,ws-ap3705i|\
glinet,gl-ar300m-lite|\
@ -227,11 +225,6 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:wan" "2:lan:3" "3:lan:2"
;;
engenius,enh202-v1)
ucidef_set_interface_wan "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "4:lan:1"
;;
engenius,ens202ext-v1)
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
@ -530,19 +523,6 @@ ath79_setup_macs()
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
label_mac=$lan_mac
;;
engenius,enh202-v1|\
ubnt,airrouter|\
ubnt,bullet-m-ar7240|\
ubnt,bullet-m-ar7241|\
ubnt,nanobridge-m|\
ubnt,nanostation-loco-m|\
ubnt,nanostation-m|\
ubnt,picostation-m|\
ubnt,powerbridge-m|\
ubnt,rocket-m|\
ubnt,unifi)
label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
;;
engenius,epg5000)
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
@ -623,6 +603,18 @@ ath79_setup_macs()
wan_mac=$(mtd_get_mac_text mac 0x18)
label_mac=$wan_mac
;;
ubnt,airrouter|\
ubnt,bullet-m-ar7240|\
ubnt,bullet-m-ar7241|\
ubnt,nanobridge-m|\
ubnt,nanostation-loco-m|\
ubnt,nanostation-m|\
ubnt,picostation-m|\
ubnt,powerbridge-m|\
ubnt,rocket-m|\
ubnt,unifi)
label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
;;
ubnt,litebeam-ac-gen2|\
ubnt,nanobeam-ac-gen2|\
ubnt,powerbeam-5ac-500|\

5
target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
View File

@ -74,10 +74,7 @@ case "$FIRMWARE" in
avm,fritz300e)
caldata_extract_reverse "urloader" 0x1541 0x440
;;
buffalo,wzr-hp-g302h-a1a0|\
engenius,eap350-v1|\
engenius,ecb350-v1|\
engenius,enh202-v1)
buffalo,wzr-hp-g302h-a1a0)
caldata_extract "art" 0x1000 0xeb8
;;
buffalo,wzr-hp-g450h|\

33
target/linux/ath79/image/common-engenius.mk Normal file
View File

@ -0,0 +1,33 @@
DEVICE_VARS += ENGENIUS_IMGNAME
# This needs to make /tmp/_sys/sysupgrade.tgz an empty file prior to
# sysupgrade, as otherwise it will implant the old configuration from
# OEM firmware when writing rootfs from factory.bin
define Build/engenius-tar-gz
-[ -f "$@" ] && \
mkdir -p $@.tmp && \
touch $@.tmp/failsafe.bin && \
echo '#!/bin/sh' > $@.tmp/before-upgrade.sh && \
echo ': > /tmp/_sys/sysupgrade.tgz' >> $@.tmp/before-upgrade.sh && \
$(CP) $(KDIR)/loader-$(DEVICE_NAME).uImage \
$@.tmp/openwrt-$(word 1,$(1))-uImage-lzma.bin && \
$(CP) $@ $@.tmp/openwrt-$(word 1,$(1))-root.squashfs && \
$(TAR) -cp --numeric-owner --owner=0 --group=0 --mode=a-s --sort=name \
$(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
-C $@.tmp . | gzip -9n > $@ && \
rm -rf $@.tmp
endef
define Device/engenius_loader_okli
DEVICE_VENDOR := EnGenius
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
LOADER_TYPE := bin
COMPILE := loader-$(1).bin loader-$(1).uImage
COMPILE/loader-$(1).bin := loader-okli-compile
COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | lzma | \
uImage lzma
IMAGES += factory.bin
IMAGE/factory.bin := append-squashfs-fakeroot-be | pad-to $$$$(BLOCKSIZE) | \
append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
check-size | engenius-tar-gz $$$$(ENGENIUS_IMGNAME)
endef

70
target/linux/ath79/image/generic.mk
View File

@ -1,12 +1,12 @@
include ./common-buffalo.mk
include ./common-engenius.mk
include ./common-netgear.mk
include ./common-tp-link.mk
include ./common-yuncore.mk
DEVICE_VARS += ADDPATTERN_ID ADDPATTERN_VERSION
DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK
DEVICE_VARS += KERNEL_INITRAMFS_PREFIX
DEVICE_VARS += DAP_SIGNATURE ENGENIUS_IMGNAME
DEVICE_VARS += KERNEL_INITRAMFS_PREFIX DAP_SIGNATURE
DEVICE_VARS += EDIMAX_HEADER_MAGIC EDIMAX_HEADER_MODEL
define Build/add-elecom-factory-initramfs
@ -69,24 +69,6 @@ define Build/edimax-headers
rm -rf $@.uImage $@.rootfs
endef
# This needs to make /tmp/_sys/sysupgrade.tgz an empty file prior to
# sysupgrade, as otherwise it will implant the old configuration from
# OEM firmware when writing rootfs from factory.bin
define Build/engenius-tar-gz
-[ -f "$@" ] && \
mkdir -p $@.tmp && \
touch $@.tmp/failsafe.bin && \
echo '#!/bin/sh' > $@.tmp/before-upgrade.sh && \
echo ': > /tmp/_sys/sysupgrade.tgz' >> $@.tmp/before-upgrade.sh && \
$(CP) $(KDIR)/loader-$(DEVICE_NAME).uImage \
$@.tmp/openwrt-$(word 1,$(1))-uImage-lzma.bin && \
$(CP) $@ $@.tmp/openwrt-$(word 1,$(1))-root.squashfs && \
$(TAR) -cp --numeric-owner --owner=0 --group=0 --mode=a-s --sort=name \
$(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
-C $@.tmp . | gzip -9n > $@ && \
rm -rf $@.tmp
endef
define Build/mkdapimg2
$(STAGING_DIR_HOST)/bin/mkdapimg2 \
-i $@ -o $@.new \
@ -974,20 +956,6 @@ define Device/embeddedwireless_dorin
endef
TARGET_DEVICES += embeddedwireless_dorin
define Device/engenius_loader_okli
DEVICE_VENDOR := EnGenius
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
LOADER_TYPE := bin
COMPILE := loader-$(1).bin loader-$(1).uImage
COMPILE/loader-$(1).bin := loader-okli-compile
COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | lzma | \
uImage lzma
IMAGES += factory.bin
IMAGE/factory.bin := append-squashfs-fakeroot-be | pad-to $$$$(BLOCKSIZE) | \
append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
check-size | engenius-tar-gz $$$$(ENGENIUS_IMGNAME)
endef
define Device/engenius_eap300-v2
$(Device/engenius_loader_okli)
SOC := ar9341
@ -999,17 +967,6 @@ define Device/engenius_eap300-v2
endef
TARGET_DEVICES += engenius_eap300-v2
define Device/engenius_eap350-v1
$(Device/engenius_loader_okli)
SOC := ar7242
DEVICE_MODEL := EAP350
DEVICE_VARIANT := v1
IMAGE_SIZE := 4864k
LOADER_FLASH_OFFS := 0x1b0000
ENGENIUS_IMGNAME := senao-eap350
endef
TARGET_DEVICES += engenius_eap350-v1
define Device/engenius_eap600
$(Device/engenius_loader_okli)
SOC := ar9344
@ -1046,17 +1003,6 @@ define Device/engenius_ecb1750
endef
TARGET_DEVICES += engenius_ecb1750
define Device/engenius_ecb350-v1
$(Device/engenius_loader_okli)
SOC := ar7242
DEVICE_MODEL := ECB350
DEVICE_VARIANT := v1
IMAGE_SIZE := 4864k
LOADER_FLASH_OFFS := 0x1b0000
ENGENIUS_IMGNAME := senao-ecb350
endef
TARGET_DEVICES += engenius_ecb350-v1
define Device/engenius_ecb600
$(Device/engenius_loader_okli)
SOC := ar9344
@ -1067,18 +1013,6 @@ define Device/engenius_ecb600
endef
TARGET_DEVICES += engenius_ecb600
define Device/engenius_enh202-v1
$(Device/engenius_loader_okli)
SOC := ar7240
DEVICE_MODEL := ENH202
DEVICE_VARIANT := v1
DEVICE_PACKAGES := rssileds
IMAGE_SIZE := 4864k
LOADER_FLASH_OFFS := 0x1b0000
ENGENIUS_IMGNAME := senao-enh202
endef
TARGET_DEVICES += engenius_enh202-v1
define Device/engenius_ens202ext-v1
$(Device/engenius_loader_okli)
SOC := ar9341

35
target/linux/ath79/image/tiny.mk
View File

@ -1,4 +1,5 @@
include ./common-buffalo.mk
include ./common-engenius.mk
define Device/buffalo_whr-g301n
$(Device/buffalo_common)
@ -30,6 +31,40 @@ define Device/dlink_dir-615-e4
endef
TARGET_DEVICES += dlink_dir-615-e4
define Device/engenius_eap350-v1
$(Device/engenius_loader_okli)
SOC := ar7242
DEVICE_MODEL := EAP350
DEVICE_VARIANT := v1
IMAGE_SIZE := 4864k
LOADER_FLASH_OFFS := 0x1b0000
ENGENIUS_IMGNAME := senao-eap350
endef
TARGET_DEVICES += engenius_eap350-v1
define Device/engenius_ecb350-v1
$(Device/engenius_loader_okli)
SOC := ar7242
DEVICE_MODEL := ECB350
DEVICE_VARIANT := v1
IMAGE_SIZE := 4864k
LOADER_FLASH_OFFS := 0x1b0000
ENGENIUS_IMGNAME := senao-ecb350
endef
TARGET_DEVICES += engenius_ecb350-v1
define Device/engenius_enh202-v1
$(Device/engenius_loader_okli)
SOC := ar7240
DEVICE_MODEL := ENH202
DEVICE_VARIANT := v1
DEVICE_PACKAGES := rssileds
IMAGE_SIZE := 4864k
LOADER_FLASH_OFFS := 0x1b0000
ENGENIUS_IMGNAME := senao-enh202
endef
TARGET_DEVICES += engenius_enh202-v1
define Device/pqi_air-pen
SOC := ar9330
DEVICE_VENDOR := PQI

8
target/linux/ath79/tiny/base-files/etc/board.d/01_leds
View File

@ -21,6 +21,14 @@ tplink,tl-wr941-v4)
ucidef_set_led_switch "lan3" "LAN3" "green:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "green:lan4" "switch0" "0x10"
;;
engenius,enh202-v1)
ucidef_set_led_switch "lan" "LAN" "amber:lan" "switch0" "0x10"
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth0"
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "red:rssilow" "wlan0" "1" "100"
ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "amber:rssimedium" "wlan0" "33" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssihigh" "wlan0" "67" "100"
;;
netgear,wnr1000-v2|\
netgear,wnr2000-v3)
ucidef_set_led_netdev "wan-amber" "WAN (amber)" "amber:wan" "eth0"

10
target/linux/ath79/tiny/base-files/etc/board.d/02_network
View File

@ -28,6 +28,8 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
;;
engenius,eap350-v1|\
engenius,ecb350-v1|\
pqi,air-pen|\
tplink,tl-mr10u|\
tplink,tl-mr3020-v1|\
@ -51,6 +53,11 @@ ath79_setup_interfaces()
tplink,tl-wr802n-v2)
ucidef_set_interface_lan "eth0"
;;
engenius,enh202-v1)
ucidef_set_interface_wan "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "4:lan:1"
;;
tplink,tl-mr3220-v1|\
tplink,tl-mr3420-v1|\
tplink,tl-mr3420-v3|\
@ -99,6 +106,9 @@ ath79_setup_macs()
wan_mac=$(mtd_get_mac_ascii "nvram" "wan_mac")
label_mac=$wan_mac
;;
engenius,enh202-v1)
label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
;;
tplink,tl-wr941-v2|\
tplink,tl-wr941n-v7-cn)
base_mac=$(mtd_get_mac_binary u-boot 0x1fc00)

3
target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
View File

@ -10,6 +10,9 @@ case "$FIRMWARE" in
"ath9k-eeprom-pci-0000:00:00.0.bin")
case $board in
buffalo,whr-g301n|\
engenius,eap350-v1|\
engenius,ecb350-v1|\
engenius,enh202-v1|\
tplink,tl-wa701nd-v1|\
tplink,tl-wa730re-v1|\
tplink,tl-wa801nd-v1|\