mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 23:42:43 +00:00
ramips: improve netis WF-2881 support
This patch does the following: 1. remove u-boot-env partition Stock bootloader saves env variables at 0x80000 in flash, and there is nothing stored at 0x30000. By merging the partition "u-boot-env" with "u-boot", the partition table becomes the same as used in stock firmware: 00000000-00080000: "Bootloader" 00080000-00100000: "Config" 00100000-00140000: "Factory" 00140000-07f80000: "Kernel" 2. fix LAN/WAN MAC addresses and provide label MAC address Ethernet MAC addresses are stored in factory partition at: 0xe000: LAN (label_mac) 0xe006: WAN (label_mac+1) 3. fix LAN port order WF-2881 LAN ports are in reverse order of switch ports. 4. fix WiFi LEDs mt76 led nodes are added to make WiFi LEDs work. On top of this, mt76 node names are changed to more generic ones, and compatible strings are also added. 5. fix pinmux groups uart3 and uart2 pins are used as button and led, but jtag pins are not. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
This commit is contained in:
parent
2c54135598
commit
763914ef1b
@ -14,6 +14,7 @@
|
||||
led-failsafe = &led_wps;
|
||||
led-running = &led_wps;
|
||||
led-upgrade = &led_wps;
|
||||
label-mac-device = ðernet;
|
||||
};
|
||||
|
||||
chosen {
|
||||
@ -57,13 +58,7 @@
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x1000>;
|
||||
reg = <0x0 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
@ -82,7 +77,7 @@
|
||||
partition@140000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x140000 0x7E40000>;
|
||||
reg = <0x140000 0x7e40000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -92,29 +87,41 @@
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
mt76@0,0 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
|
||||
led {
|
||||
led-sources = <2>;
|
||||
led-active-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
mt76@0,0 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0000>;
|
||||
ieee80211-freq-limit = <2400000 2500000>;
|
||||
|
||||
led {
|
||||
led-sources = <2>;
|
||||
led-active-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0xe006>;
|
||||
mtd-mac-address = <&factory 0xe000>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "uart3", "jtag";
|
||||
ralink,group = "uart3", "uart2";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
@ -18,7 +18,6 @@ ramips_setup_interfaces()
|
||||
mediatek,mt7621-eval-board|\
|
||||
mqmaker,witi|\
|
||||
mtc,wr1201|\
|
||||
netis,wf-2881|\
|
||||
phicomm,k2p|\
|
||||
planex,vr500|\
|
||||
samknows,whitebox-v8|\
|
||||
@ -113,7 +112,8 @@ ramips_setup_interfaces()
|
||||
netgear,r6260|\
|
||||
netgear,r6350|\
|
||||
netgear,r6850|\
|
||||
netgear,wndr3700-v5)
|
||||
netgear,wndr3700-v5|\
|
||||
netis,wf-2881)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0"
|
||||
;;
|
||||
@ -150,6 +150,7 @@ ramips_setup_macs()
|
||||
elecom,wrc-1900gst|\
|
||||
elecom,wrc-2533gst|\
|
||||
lenovo,newifi-d1|\
|
||||
netis,wf-2881|\
|
||||
phicomm,k2p|\
|
||||
planex,vr500|\
|
||||
samknows,whitebox-v8|\
|
||||
|
Loading…
Reference in New Issue
Block a user