diff --git a/target/linux/qualcommax/config-6.1 b/target/linux/qualcommax/config-6.1
index 7a983b961b3..ad08d05f70c 100644
--- a/target/linux/qualcommax/config-6.1
+++ b/target/linux/qualcommax/config-6.1
@@ -55,6 +55,7 @@ CONFIG_ARM_PSCI_CPUIDLE=y
 CONFIG_ARM_PSCI_FW=y
 # CONFIG_ARM_QCOM_CPUFREQ_HW is not set
 CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
+CONFIG_AT803X_PHY=y
 CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_SD=y
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax880.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax880.dts
index 73bc13cf320..bb4634d054b 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax880.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax880.dts
@@ -8,6 +8,7 @@
 #include "ipq8074-ess.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "Yuncore AX880";
@@ -313,12 +314,36 @@
 		compatible = "ethernet-phy-id004d.d101";
 		reg = <24>;
 		reset-gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WAN;
+				default-state = "keep";
+			};
+		};
 	};
 
 	qca8081_28: ethernet-phy@28 {
 		compatible = "ethernet-phy-id004d.d101";
 		reg = <28>;
 		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
 	};
 };
 
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts
index 0df16e9ad7d..0408c6ed859 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts
@@ -378,6 +378,18 @@
 		compatible = "ethernet-phy-id004d.d101";
 		reg = <24>;
 		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WAN;
+				default-state = "keep";
+			};
+		};
 	};
 };
 
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts
index a4548a77831..4519a7a6bf4 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts
@@ -163,6 +163,25 @@
 		compatible = "ethernet-phy-id004d.d101";
 		reg = <28>;
 		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WAN;
+				default-state = "keep";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_WAN;
+				default-state = "keep";
+			};
+		};
 	};
 };
 
diff --git a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds
index 5e478d75eec..f3e67311c3a 100644
--- a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds
+++ b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds
@@ -10,6 +10,10 @@ arcadyan,aw1000)
 	ucidef_set_led_netdev "5g" "5G" "green:5g" "wwan0"
 	ucidef_set_led_netdev "wan" "WAN" "green:internet" "wan"
 	;;
+dynalink,dl-wrx36)
+	ucidef_set_led_netdev "wan-port-link-green" "WAN-PORT-LINK-GREEN" "90000.mdio-1:1c:green:wan" "wan" "link_2500"
+	ucidef_set_led_netdev "wan-port-link-yellow" "WAN-PORT-LINK-YELLOW" "90000.mdio-1:1c:yellow:wan" "wan" "tx rx link_10 link_100 link_1000"
+	;;
 edgecore,eap102)
 	ucidef_set_led_netdev "wan" "WAN" "green:wanpoe" "wan"
 	;;
@@ -32,6 +36,9 @@ redmi,ax6|\
 xiaomi,ax3600)
 	ucidef_set_led_netdev "wan" "WAN" "blue:network" "wan"
 	;;
+xiaomi,ax9000)
+	ucidef_set_led_netdev "wan-port-link" "WAN-PORT-LINK" "90000.mdio-1:18:green:wan" "wan" "tx rx link_10 link_100 link_1000 link_2500"
+	;;
 qnap,301w)
 	ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "lan1"
 	ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "lan2"
@@ -40,6 +47,10 @@ qnap,301w)
 	ucidef_set_led_netdev "10G_1" "10G_1" "green:10g_1" "10g-1"
 	ucidef_set_led_netdev "10G_2" "10G_2" "green:10g_2" "10g-2"
 	;;
+yuncore,ax880)
+	ucidef_set_led_netdev "wan-port-link" "WAN-PORT-LINK" "90000.mdio-1:18:green:wan" "wan" "tx rx link_10 link_100 link_1000 link_2500"
+	ucidef_set_led_netdev "lan-port-link" "LAN-PORT-LINK" "90000.mdio-1:1c:green:lan" "lan" "tx rx link_10 link_100 link_1000 link_2500"
+	;;
 esac
 
 board_config_flush