kernel: bump 5.4 to 5.4.74

Removed upstreamed patches:
 mvebu/patches-5.4
   409-phy-marvell-comphy-Convert-internal-SMCC-firmware-re.patch

All modifications made by update_kernel.sh

Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711, x86_64
Run-tested: ipq806x/R7800, x86_64, lantiq/Easybox 904 xDSL

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
Tested-by: Curtis Deptuck <curtdept@me.com> [x86_64 build/run]
[added lantiq test report]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

include/kernel-version.mk

@@ -6,9 +6,9 @@ ifdef CONFIG_TESTING_KERNEL
   KERNEL_PATCHVER:=$(KERNEL_TESTING_PATCHVER)
 endif
 
-LINUX_VERSION-5.4 = .73
+LINUX_VERSION-5.4 = .74
 
-LINUX_KERNEL_HASH-5.4.73 = 5a424b403b726bbe7dfa1d1524e431676c4a64f22a8db524534ed678bfe576b2
+LINUX_KERNEL_HASH-5.4.74 = ec04f4ade1146a3b458a1ac3dc2059188cbb62cd51d2e66fcd8397fcec153ab7
 
 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
 sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))

target/linux/bcm27xx/patches-5.4/950-0031-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch

@@ -14,7 +14,7 @@ use the same logic.
 
 --- a/drivers/tty/serial/amba-pl011.c
 +++ b/drivers/tty/serial/amba-pl011.c
-@@ -2575,7 +2575,12 @@ static int pl011_setup_port(struct devic
+@@ -2578,7 +2578,12 @@ static int pl011_setup_port(struct devic
  	if (IS_ERR(base))
  		return PTR_ERR(base);
  

target/linux/bcm27xx/patches-5.4/950-0032-amba_pl011-Round-input-clock-up.patch

@@ -26,7 +26,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
 
 --- a/drivers/tty/serial/amba-pl011.c
 +++ b/drivers/tty/serial/amba-pl011.c
-@@ -1650,6 +1650,23 @@ static void pl011_put_poll_char(struct u
+@@ -1653,6 +1653,23 @@ static void pl011_put_poll_char(struct u
  
  #endif /* CONFIG_CONSOLE_POLL */
  
@@ -50,7 +50,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  static int pl011_hwinit(struct uart_port *port)
  {
  	struct uart_amba_port *uap =
-@@ -1666,7 +1683,7 @@ static int pl011_hwinit(struct uart_port
+@@ -1669,7 +1686,7 @@ static int pl011_hwinit(struct uart_port
  	if (retval)
  		return retval;
  
@@ -59,7 +59,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  
  	/* Clear pending error and receive interrupts */
  	pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS |
-@@ -2321,7 +2338,7 @@ static int pl011_console_setup(struct co
+@@ -2324,7 +2341,7 @@ static int pl011_console_setup(struct co
  			plat->init();
  	}
  
@@ -68,7 +68,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  
  	if (uap->vendor->fixed_options) {
  		baud = uap->fixed_baud;
-@@ -2506,6 +2523,7 @@ static struct uart_driver amba_reg = {
+@@ -2509,6 +2526,7 @@ static struct uart_driver amba_reg = {
  	.cons			= AMBA_CONSOLE,
  };
  
@@ -76,7 +76,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  static int pl011_probe_dt_alias(int index, struct device *dev)
  {
  	struct device_node *np;
-@@ -2537,6 +2555,7 @@ static int pl011_probe_dt_alias(int inde
+@@ -2540,6 +2558,7 @@ static int pl011_probe_dt_alias(int inde
  
  	return ret;
  }

target/linux/bcm27xx/patches-5.4/950-0033-amba_pl011-Insert-mb-for-correct-FIFO-handling.patch

@@ -17,7 +17,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
 
 --- a/drivers/tty/serial/amba-pl011.c
 +++ b/drivers/tty/serial/amba-pl011.c
-@@ -1383,6 +1383,7 @@ static bool pl011_tx_char(struct uart_am
+@@ -1386,6 +1386,7 @@ static bool pl011_tx_char(struct uart_am
  		return false; /* unable to transmit character */
  
  	pl011_write(c, uap, REG_DR);

target/linux/bcm27xx/patches-5.4/950-0034-amba_pl011-Add-cts-event-workaround-DT-property.patch

@@ -36,7 +36,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
    - reg
 --- a/drivers/tty/serial/amba-pl011.c
 +++ b/drivers/tty/serial/amba-pl011.c
-@@ -2662,6 +2662,11 @@ static int pl011_probe(struct amba_devic
+@@ -2665,6 +2665,11 @@ static int pl011_probe(struct amba_devic
  	if (IS_ERR(uap->clk))
  		return PTR_ERR(uap->clk);
  

target/linux/bcm27xx/patches-5.4/950-0266-tty-amba-pl011-Make-TX-optimisation-conditional.patch

@@ -42,7 +42,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  #ifdef CONFIG_DMA_ENGINE
  	/* DMA stuff */
  	bool			using_tx_dma;
-@@ -813,6 +814,7 @@ __acquires(&uap->port.lock)
+@@ -816,6 +817,7 @@ __acquires(&uap->port.lock)
  	if (!uap->using_tx_dma)
  		return;
  
@@ -50,7 +50,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	dmaengine_terminate_async(uap->dmatx.chan);
  
  	if (uap->dmatx.queued) {
-@@ -939,6 +941,7 @@ static void pl011_dma_rx_chars(struct ua
+@@ -942,6 +944,7 @@ static void pl011_dma_rx_chars(struct ua
  		fifotaken = pl011_fifo_to_tty(uap);
  	}
  
@@ -58,7 +58,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	spin_unlock(&uap->port.lock);
  	dev_vdbg(uap->port.dev,
  		 "Took %d chars from DMA buffer and %d chars from the FIFO\n",
-@@ -1347,6 +1350,7 @@ __acquires(&uap->port.lock)
+@@ -1350,6 +1353,7 @@ __acquires(&uap->port.lock)
  {
  	pl011_fifo_to_tty(uap);
  
@@ -66,7 +66,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	spin_unlock(&uap->port.lock);
  	tty_flip_buffer_push(&uap->port.state->port);
  	/*
-@@ -1482,6 +1486,7 @@ static irqreturn_t pl011_int(int irq, vo
+@@ -1485,6 +1489,7 @@ static irqreturn_t pl011_int(int irq, vo
  	int handled = 0;
  
  	spin_lock_irqsave(&uap->port.lock, flags);
@@ -74,7 +74,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	status = pl011_read(uap, REG_RIS) & uap->im;
  	if (status) {
  		do {
-@@ -1501,7 +1506,7 @@ static irqreturn_t pl011_int(int irq, vo
+@@ -1504,7 +1509,7 @@ static irqreturn_t pl011_int(int irq, vo
  				      UART011_CTSMIS|UART011_RIMIS))
  				pl011_modem_status(uap);
  			if (status & UART011_TXIS)

target/linux/bcm27xx/patches-5.4/950-0397-tty-amba-pl011-Add-un-throttle-support.patch

@@ -17,7 +17,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
 
 --- a/drivers/tty/serial/amba-pl011.c
 +++ b/drivers/tty/serial/amba-pl011.c
-@@ -1323,6 +1323,32 @@ static void pl011_start_tx(struct uart_p
+@@ -1326,6 +1326,32 @@ static void pl011_start_tx(struct uart_p
  		pl011_start_tx_pio(uap);
  }
  
@@ -50,7 +50,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  static void pl011_stop_rx(struct uart_port *port)
  {
  	struct uart_amba_port *uap =
-@@ -2164,6 +2190,8 @@ static const struct uart_ops amba_pl011_
+@@ -2167,6 +2193,8 @@ static const struct uart_ops amba_pl011_
  	.stop_tx	= pl011_stop_tx,
  	.start_tx	= pl011_start_tx,
  	.stop_rx	= pl011_stop_rx,

target/linux/bcm27xx/patches-5.4/950-0407-tty-amba-pl011-Avoid-rare-write-when-full-error.patch

@@ -29,7 +29,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
 
 --- a/drivers/tty/serial/amba-pl011.c
 +++ b/drivers/tty/serial/amba-pl011.c
-@@ -1444,6 +1444,10 @@ static bool pl011_tx_chars(struct uart_a
+@@ -1447,6 +1447,10 @@ static bool pl011_tx_chars(struct uart_a
  		if (likely(from_irq) && count-- == 0)
  			break;
  

target/linux/generic/hack-5.4/901-debloat_sock_diag.patch

@@ -69,7 +69,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  struct dst_entry *__sk_dst_check(struct sock *sk, u32 cookie)
  {
  	struct dst_entry *dst = __sk_dst_get(sk);
-@@ -1743,9 +1756,11 @@ static void __sk_free(struct sock *sk)
+@@ -1742,9 +1755,11 @@ static void __sk_free(struct sock *sk)
  	if (likely(sk->sk_net_refcnt))
  		sock_inuse_add(sock_net(sk), -1);
  

target/linux/generic/hack-5.4/902-debloat_proc.patch

@@ -330,7 +330,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  
 --- a/net/core/sock.c
 +++ b/net/core/sock.c
-@@ -3630,6 +3630,8 @@ static __net_initdata struct pernet_oper
+@@ -3629,6 +3629,8 @@ static __net_initdata struct pernet_oper
  
  static int __init proto_init(void)
  {

target/linux/mvebu/patches-5.4/409-phy-marvell-comphy-Convert-internal-SMCC-firmware-re.patch

@@ -1,106 +0,0 @@
-From ea17a0f153af2cd890e4ce517130dcccaa428c13 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Wed, 2 Sep 2020 16:43:43 +0200
-Subject: [PATCH] phy: marvell: comphy: Convert internal SMCC firmware return
- codes to errno
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Driver ->power_on and ->power_off callbacks leaks internal SMCC firmware
-return codes to phy caller. This patch converts SMCC error codes to
-standard linux errno codes. Include file linux/arm-smccc.h already provides
-defines for SMCC error codes, so use them instead of custom driver defines.
-Note that return value is signed 32bit, but stored in unsigned long type
-with zero padding.
-
-Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
-Link: https://lore.kernel.org/r/20200902144344.16684-2-pali@kernel.org
-Signed-off-by: Pali Rohár <pali@kernel.org>
-Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
----
- drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 14 +++++++++++---
- drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 14 +++++++++++---
- 2 files changed, 22 insertions(+), 6 deletions(-)
-
---- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
-+++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
-@@ -26,7 +26,6 @@
- #define COMPHY_SIP_POWER_ON			0x82000001
- #define COMPHY_SIP_POWER_OFF			0x82000002
- #define COMPHY_SIP_PLL_LOCK			0x82000003
--#define COMPHY_FW_NOT_SUPPORTED			(-1)
- 
- #define COMPHY_FW_MODE_SATA			0x1
- #define COMPHY_FW_MODE_SGMII			0x2
-@@ -112,10 +111,19 @@ static int mvebu_a3700_comphy_smc(unsign
- 				  unsigned long mode)
- {
- 	struct arm_smccc_res res;
-+	s32 ret;
- 
- 	arm_smccc_smc(function, lane, mode, 0, 0, 0, 0, 0, &res);
-+	ret = res.a0;
- 
--	return res.a0;
-+	switch (ret) {
-+	case SMCCC_RET_SUCCESS:
-+		return 0;
-+	case SMCCC_RET_NOT_SUPPORTED:
-+		return -EOPNOTSUPP;
-+	default:
-+		return -EINVAL;
-+	}
- }
- 
- static int mvebu_a3700_comphy_get_fw_mode(int lane, int port,
-@@ -220,7 +228,7 @@ static int mvebu_a3700_comphy_power_on(s
- 	}
- 
- 	ret = mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_ON, lane->id, fw_param);
--	if (ret == COMPHY_FW_NOT_SUPPORTED)
-+	if (ret == -EOPNOTSUPP)
- 		dev_err(lane->dev,
- 			"unsupported SMC call, try updating your firmware\n");
- 
---- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
-+++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
-@@ -123,7 +123,6 @@
- 
- #define COMPHY_SIP_POWER_ON	0x82000001
- #define COMPHY_SIP_POWER_OFF	0x82000002
--#define COMPHY_FW_NOT_SUPPORTED	(-1)
- 
- /*
-  * A lane is described by the following bitfields:
-@@ -273,10 +272,19 @@ static int mvebu_comphy_smc(unsigned lon
- 			    unsigned long lane, unsigned long mode)
- {
- 	struct arm_smccc_res res;
-+	s32 ret;
- 
- 	arm_smccc_smc(function, phys, lane, mode, 0, 0, 0, 0, &res);
-+	ret = res.a0;
- 
--	return res.a0;
-+	switch (ret) {
-+	case SMCCC_RET_SUCCESS:
-+		return 0;
-+	case SMCCC_RET_NOT_SUPPORTED:
-+		return -EOPNOTSUPP;
-+	default:
-+		return -EINVAL;
-+	}
- }
- 
- static int mvebu_comphy_get_mode(bool fw_mode, int lane, int port,
-@@ -819,7 +827,7 @@ static int mvebu_comphy_power_on(struct
- 	if (!ret)
- 		return ret;
- 
--	if (ret == COMPHY_FW_NOT_SUPPORTED)
-+	if (ret == -EOPNOTSUPP)
- 		dev_err(priv->dev,
- 			"unsupported SMC call, try updating your firmware\n");
-