mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 22:47:56 +00:00
qualcommax: ipq807x: add support for Linksys MX5300
Hardware specification: ======== SoC: Qualcomm IPQ8072A Flash: 512MB (Winbond W29N04GZBIBA) RAM: 1GB (2x Nanya DDR3L NT5CC256M16ER-EK) Ethernet: 5x 10/100/1000Mbps (Qualcomm QCA8075) WiFi1: 5GHz ac 4x4 (Qualcomm QCA9984 + Skyworks SKY85746-11) - channels 100-169 WiFi2: 5GHz ax 4x4 (Qualcomm QCN5054 + Skyworks SKY85755-11) - channels 36-64 WiFi3: 2.4GHz ax 4x4 (Qualcomm QCN5024 + Skyworks SKY8340-11) IoT: Bluetooth 5, Zigbee and Thread (Qualcomm QCA4024 + Skyworks SE2433T-R) IoT Flash: 4MB (Macronix MX25R3235F) RTC: ST M41T00S LED: 1x RGB status (NXP PCA9633) USB: 1x USB 3.0 Button: WPS, Reset Flash instructions: ======== 1. Manually upgrade firmware using openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin image. More details can be found here: https://www.linksys.com/hk/support-article?articleNum=274497 After first boot check actual partition: - fw_printenv -n boot_part and install firmware on second partition using command in case of 2: - mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin kernel and in case of 1: - mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin alt_kernel 2. Installation using serial connection from OEM firmware (default login: root, password: admin): - fw_printenv -n boot_part In case of 2: - flash_erase /dev/mtd21 0 0 nandwrite -p /dev/mtd21 openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin or in case of 1: - flash_erase /dev/mtd23 0 0 nandwrite -p /dev/mtd23 openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin After first boot install firmware on second partition: - mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin kernel or: - mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin alt_kernel 3. Installation from initramfs image using USB FAT32 formatted drive: Stop u-boot and run: - usb start && fatload usb 0:1 $loadaddr openwrt-qualcommax-ipq807x-linksys_mx5300-initramfs-uImage.itb && bootm $loadaddr Write firmware to the flash from initramfs: - mtd -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin kernel and: - mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx5300-squashfs-factory.bin alt_kernel 4. Back to the OEM firmware: - mtd -e kernel -n write FW_MX5300_1.1.9.200251_prod.img kernel and: - mtd -r -e alt_kernel -n write FW_MX5300_1.1.9.200251_prod.img alt_kernel 5. USB recovery: - fw_setenv usbimage 'openwrt-qualcommax-ipq807x-linksys_mx5300-initramfs-uImage.itb' fw_setenv bootusb 'usb start && fatload usb 0:1 $loadaddr $usbimage && bootm $loadaddr' fw_setenv bootcmd 'run bootusb; aq_load_fw && if test $auto_recovery = no; then bootipq; elif test $boot_part = 1; then run bootpart1; else run bootpart2; fi' Notes: ======== IoT device is accesible over spi. Not yet supported. Signed-off-by: Paweł Owoc <frut3k7@gmail.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
Paweł Owoc
parent
ac77b45b08
commit
70fd815e57
@ -30,7 +30,8 @@ edimax,cax1800)
|
||||
ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x10000" "0x20000"
|
||||
;;
|
||||
linksys,mx4200v1|\
|
||||
linksys,mx4200v2)
|
||||
linksys,mx4200v2|\
|
||||
linksys,mx5300)
|
||||
idx="$(find_mtd_index u_env)"
|
||||
[ -n "$idx" ] && \
|
||||
ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x40000" "0x20000" "2"
|
||||
|
||||
@ -6,9 +6,9 @@ PKG_RELEASE:=1
|
||||
|
||||
PKG_SOURCE_PROTO:=git
|
||||
PKG_SOURCE_URL=$(PROJECT_GIT)/project/firmware/qca-wireless.git
|
||||
PKG_SOURCE_DATE:=2024-02-19
|
||||
PKG_SOURCE_VERSION:=1cc59e1e09f68305bbf15e2de23d1c1829aee1eb
|
||||
PKG_MIRROR_HASH:=383e7384d37cde2433b9bf6daee5d57ecd6f2c473f00901b491ae0c15d97fd53
|
||||
PKG_SOURCE_DATE:=2024-02-23
|
||||
PKG_SOURCE_VERSION:=9f9d9ba9cd77043744dcd5235497a15eea51c375
|
||||
PKG_MIRROR_HASH:=3a064a8810e6857580c4682f6b86a9dfcdb0d3aa361f4ec0c5480c54de4cc864
|
||||
|
||||
PKG_FLAGS:=nonshared
|
||||
|
||||
@ -37,6 +37,7 @@ ALLWIFIBOARDS:= \
|
||||
edgecore_eap102 \
|
||||
edimax_cax1800 \
|
||||
linksys_mx4200 \
|
||||
linksys_mx5300 \
|
||||
netgear_rax120v2 \
|
||||
netgear_wax218 \
|
||||
netgear_wax620 \
|
||||
@ -152,6 +153,7 @@ $(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36))
|
||||
$(eval $(call generate-ipq-wifi-package,edgecore_eap102,Edgecore EAP102))
|
||||
$(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800))
|
||||
$(eval $(call generate-ipq-wifi-package,linksys_mx4200,Linksys MX4200))
|
||||
$(eval $(call generate-ipq-wifi-package,linksys_mx5300,Linksys MX5300))
|
||||
$(eval $(call generate-ipq-wifi-package,netgear_rax120v2,Netgear RAX120v2))
|
||||
$(eval $(call generate-ipq-wifi-package,netgear_wax218,Netgear WAX218))
|
||||
$(eval $(call generate-ipq-wifi-package,netgear_wax620,Netgear WAX620))
|
||||
|
||||
@ -0,0 +1,544 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "ipq8074.dtsi"
|
||||
#include "ipq8074-hk-cpu.dtsi"
|
||||
#include "ipq8074-ess.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
model = "Linksys MX5300";
|
||||
compatible = "linksys,mx5300", "qcom,ipq8074";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart5;
|
||||
/*
|
||||
* Aliases as required by u-boot
|
||||
* to patch MAC addresses
|
||||
*/
|
||||
ethernet0 = &dp1;
|
||||
ethernet1 = &dp2;
|
||||
ethernet2 = &dp3;
|
||||
ethernet3 = &dp4;
|
||||
ethernet4 = &dp5;
|
||||
led-boot = &led_system_blue;
|
||||
led-running = &led_system_blue;
|
||||
led-failsafe = &led_system_red;
|
||||
led-upgrade = &led_system_green;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
bootargs-append = " root=/dev/ubiblock0_0 rootfstype=squashfs ro";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
reset-button {
|
||||
label = "reset";
|
||||
gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps-button {
|
||||
label = "wps";
|
||||
gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
button_pins: button-state {
|
||||
pins = "gpio54", "gpio67";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mdio_pins: mdio-state {
|
||||
mdc-pins {
|
||||
pins = "gpio68";
|
||||
function = "mdc";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mdio-pins {
|
||||
pins = "gpio69";
|
||||
function = "mdio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* QCA4024 is not currently supported, keep for documentation purposes
|
||||
*spi_3_pins: spi-3-state {
|
||||
* spi-pins {
|
||||
* pins = "gpio50", "gpio52", "gpio53";
|
||||
* function = "blsp3_spi";
|
||||
* drive-strength = <8>;
|
||||
* bias-disable;
|
||||
* };
|
||||
*
|
||||
* cs-pins {
|
||||
* pins = "gpio22";
|
||||
* function = "blsp3_spi2";
|
||||
* drive-strength = <8>;
|
||||
* bias-disable;
|
||||
* };
|
||||
*};
|
||||
*
|
||||
*quartz_pins: quartz-state {
|
||||
* interrupt-pins {
|
||||
* pins = "gpio48";
|
||||
* function = "gpio";
|
||||
* bias-disable;
|
||||
* input;
|
||||
* };
|
||||
*
|
||||
* reset-pins {
|
||||
* pins = "gpio21";
|
||||
* function = "gpio";
|
||||
* bias-disable;
|
||||
* output-high;
|
||||
* };
|
||||
*};
|
||||
*/
|
||||
};
|
||||
|
||||
&blsp1_uart5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&prng {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cryptobam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&crypto {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qpic_bam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qpic_nand {
|
||||
status = "okay";
|
||||
|
||||
/*
|
||||
* Bootloader will find the NAND DT node by the compatible and
|
||||
* then "fixup" it by adding the partitions from the SMEM table
|
||||
* using the legacy bindings thus making it impossible for us
|
||||
* to change the partition table or utilize NVMEM for calibration.
|
||||
* So add a dummy partitions node that bootloader will populate
|
||||
* and set it as disabled so the kernel ignores it instead of
|
||||
* printing warnings due to the broken way bootloader adds the
|
||||
* partitions.
|
||||
*/
|
||||
partitions {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-bus-width = <8>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "0:sbl1";
|
||||
reg = <0x0 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "0:mibib";
|
||||
reg = <0x100000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
label = "0:bootconfig";
|
||||
reg = <0x200000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@280000 {
|
||||
label = "0:bootconfig1";
|
||||
reg = <0x280000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@300000 {
|
||||
label = "0:qsee";
|
||||
reg = <0x300000 0x300000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@600000 {
|
||||
label = "0:qsee_1";
|
||||
reg = <0x600000 0x300000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@900000 {
|
||||
label = "0:devcfg";
|
||||
reg = <0x900000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@980000 {
|
||||
label = "0:devcfg_1";
|
||||
reg = <0x980000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@a00000 {
|
||||
label = "0:apdp";
|
||||
reg = <0xa00000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@a80000 {
|
||||
label = "0:apdp_1";
|
||||
reg = <0xa80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@b00000 {
|
||||
label = "0:rpm";
|
||||
reg = <0xb00000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@b80000 {
|
||||
label = "0:rpm_1";
|
||||
reg = <0xb80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@c00000 {
|
||||
label = "0:cdt";
|
||||
reg = <0xc00000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@c80000 {
|
||||
label = "0:cdt_1";
|
||||
reg = <0xc80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@d00000 {
|
||||
label = "0:appsblenv";
|
||||
reg = <0xd00000 0x80000>;
|
||||
};
|
||||
|
||||
partition@d80000 {
|
||||
label = "0:appsbl";
|
||||
reg = <0xd80000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@e80000 {
|
||||
label = "0:appsbl_1";
|
||||
reg = <0xe80000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@f80000 {
|
||||
label = "0:art";
|
||||
reg = <0xf80000 0x80000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
caldata_qca9984: caldata@33000 {
|
||||
reg = <0x33000 0x2f20>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@1000000 {
|
||||
label = "u_env";
|
||||
reg = <0x1000000 0x40000>;
|
||||
};
|
||||
|
||||
partition@1040000 {
|
||||
label = "s_env";
|
||||
reg = <0x1040000 0x20000>;
|
||||
};
|
||||
|
||||
partition@1060000 {
|
||||
label = "devinfo";
|
||||
reg = <0x1060000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1080000 {
|
||||
label = "kernel";
|
||||
reg = <0x1080000 0x9600000>;
|
||||
};
|
||||
|
||||
partition@1680000 {
|
||||
label = "rootfs";
|
||||
reg = <0x1680000 0x9000000>;
|
||||
};
|
||||
|
||||
partition@a680000 {
|
||||
label = "alt_kernel";
|
||||
reg = <0xa680000 0x9600000>;
|
||||
};
|
||||
|
||||
partition@ac80000 {
|
||||
label = "alt_rootfs";
|
||||
reg = <0xac80000 0x9000000>;
|
||||
};
|
||||
partition@13c80000 {
|
||||
label = "sysdiag";
|
||||
reg = <0x13c80000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
partition@13e80000 {
|
||||
label = "0:ethphyfw";
|
||||
reg = <0x13e80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
partition@13f00000 {
|
||||
label = "syscfg";
|
||||
reg = <0x13f00000 0xb800000>;
|
||||
read-only;
|
||||
};
|
||||
partition@1f700000 {
|
||||
label = "0:wififw";
|
||||
reg = <0x1f700000 0x900000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_i2c2 {
|
||||
status = "okay";
|
||||
|
||||
led-controller@62 {
|
||||
compatible = "nxp,pca9633";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x62>;
|
||||
nxp,hw-blink;
|
||||
|
||||
led_system_red: led@0 {
|
||||
reg = <0>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
};
|
||||
|
||||
led_system_green: led@1 {
|
||||
reg = <1>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
};
|
||||
|
||||
led_system_blue: led@2 {
|
||||
reg = <2>;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
};
|
||||
};
|
||||
|
||||
rtc@68 {
|
||||
compatible = "dallas,ds1307";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* QCA4024 is not currently supported, keep for documentation purposes
|
||||
*&blsp1_spi4 {
|
||||
* status = "okay";
|
||||
*
|
||||
* pinctrl-0 = <&spi_3_pins &quartz_pins>;
|
||||
* pinctrl-names = "default";
|
||||
*
|
||||
* iot@3 {
|
||||
* compatible = "qca,qca4024";
|
||||
* reg = <0>;
|
||||
* spi-max-frequency = <24000000>;
|
||||
* };
|
||||
*};
|
||||
*/
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
pinctrl-names = "default";
|
||||
reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
|
||||
|
||||
ethernet-phy-package@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "qcom,qca8075-package";
|
||||
reg = <0>;
|
||||
|
||||
qca8075_0: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
qca8075_1: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
qca8075_2: ethernet-phy@2 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
qca8075_3: ethernet-phy@3 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <3>;
|
||||
};
|
||||
|
||||
qca8075_4: ethernet-phy@4 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&switch {
|
||||
status = "okay";
|
||||
|
||||
switch_lan_bmp = <(ESS_PORT1 | ESS_PORT2 | ESS_PORT3 | ESS_PORT4)>; /* lan port bitmap */
|
||||
switch_wan_bmp = <ESS_PORT5>; /* wan port bitmap */
|
||||
switch_mac_mode = <MAC_MODE_PSGMII>; /* mac mode for uniphy instance0*/
|
||||
|
||||
qcom,port_phyinfo {
|
||||
port@1 {
|
||||
port_id = <1>;
|
||||
phy_address = <0>;
|
||||
};
|
||||
port@2 {
|
||||
port_id = <2>;
|
||||
phy_address = <1>;
|
||||
};
|
||||
port@3 {
|
||||
port_id = <3>;
|
||||
phy_address = <2>;
|
||||
};
|
||||
port@4 {
|
||||
port_id = <4>;
|
||||
phy_address = <3>;
|
||||
};
|
||||
port@5 {
|
||||
port_id = <5>;
|
||||
phy_address = <4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&edma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dp1 {
|
||||
status = "okay";
|
||||
phy-handle = <&qca8075_0>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
&dp2 {
|
||||
status = "okay";
|
||||
phy-handle = <&qca8075_1>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
&dp3 {
|
||||
status = "okay";
|
||||
phy-handle = <&qca8075_2>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
&dp4 {
|
||||
status = "okay";
|
||||
phy-handle = <&qca8075_3>;
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
&dp5 {
|
||||
status = "okay";
|
||||
phy-handle = <&qca8075_4>;
|
||||
label = "wan";
|
||||
};
|
||||
|
||||
&ssphy_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qusb_phy_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie_qmp1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
|
||||
perst-gpio = <&tlmm 58 GPIO_ACTIVE_LOW>;
|
||||
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
wifi0: wifi@1,0 {
|
||||
status = "okay";
|
||||
|
||||
compatible = "qcom,ath10k";
|
||||
reg = <0x00010000 0 0 0 0>;
|
||||
|
||||
qcom,ath10k-calibration-variant = "Linksys-MX5300";
|
||||
nvmem-cell-names = "pre-calibration";
|
||||
nvmem-cells = <&caldata_qca9984>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
|
||||
qcom,ath11k-calibration-variant = "Linksys-MX5300";
|
||||
};
|
||||
@ -126,6 +126,23 @@ define Device/linksys_mx4200v2
|
||||
endef
|
||||
TARGET_DEVICES += linksys_mx4200v2
|
||||
|
||||
define Device/linksys_mx5300
|
||||
$(call Device/FitImage)
|
||||
DEVICE_VENDOR := Linksys
|
||||
DEVICE_MODEL := MX5300
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
KERNEL_SIZE := 6144k
|
||||
IMAGE_SIZE := 147456k
|
||||
NAND_SIZE := 512m
|
||||
SOC := ipq8072
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MX5300
|
||||
DEVICE_PACKAGES := kmod-leds-pca963x kmod-rtc-ds1307 \
|
||||
ipq-wifi-linksys_mx5300 kmod-ath10k-ct ath10k-firmware-qca9984-ct
|
||||
endef
|
||||
TARGET_DEVICES += linksys_mx5300
|
||||
|
||||
define Device/netgear_rax120v2
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
|
||||
@ -14,6 +14,7 @@ ipq807x_setup_interfaces()
|
||||
arcadyan,aw1000|\
|
||||
buffalo,wxr-5950ax12|\
|
||||
dynalink,dl-wrx36|\
|
||||
linksys,mx5300|\
|
||||
xiaomi,ax9000)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
|
||||
;;
|
||||
|
||||
@ -18,6 +18,7 @@ case "$FIRMWARE" in
|
||||
edimax,cax1800|\
|
||||
linksys,mx4200v1|\
|
||||
linksys,mx4200v2|\
|
||||
linksys,mx5300|\
|
||||
netgear,rax120v2|\
|
||||
netgear,wax218|\
|
||||
netgear,wax620|\
|
||||
|
||||
@ -11,7 +11,8 @@ boot() {
|
||||
fw_setenv changed
|
||||
;;
|
||||
linksys,mx4200v1|\
|
||||
linksys,mx4200v2)
|
||||
linksys,mx4200v2|\
|
||||
linksys,mx5300)
|
||||
mtd resetbc s_env || true
|
||||
;;
|
||||
esac
|
||||
|
||||
@ -75,7 +75,8 @@ platform_do_upgrade() {
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
linksys,mx4200v1|\
|
||||
linksys,mx4200v2)
|
||||
linksys,mx4200v2|\
|
||||
linksys,mx5300)
|
||||
boot_part="$(fw_printenv -n boot_part)"
|
||||
if [ "$boot_part" -eq "1" ]; then
|
||||
fw_setenv boot_part 2
|
||||
|
||||
Loading…
Reference in New Issue
Block a user