cleanup files using checkpatch.pl

SVN-Revision: 27162

target/linux/adm5120/files/arch/mips/adm5120/common/early-printk.c

@@ -23,7 +23,9 @@
 
 void __init prom_putchar(char ch)
 {
-	while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
+	while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0)
+		;
 	UART_WRITE(UART_REG_DATA, ch);
-	while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
+	while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0)
+		;
 }

target/linux/adm5120/files/arch/mips/adm5120/common/gpio.c

@@ -32,10 +32,10 @@ struct gpio1_desc {
 	u8		mode_shift;	/* shift amount for mode bits */
 };
 
-#define GPIO1_DESC(p, l) { 						\
+#define GPIO1_DESC(p, l) {						\
 		.reg = GPIO_REG(SWITCH_REG_PORT0_LED + ((p) * 4)),	\
-		.iv_shift = LED0_IV_SHIFT + (l), 			\
+		.iv_shift = LED0_IV_SHIFT + (l),			\
-		.mode_shift = (l) * 4 					\
+		.mode_shift = (l) * 4					\
 	}
 
 static struct gpio1_desc gpio1_table[15] = {

target/linux/adm5120/files/arch/mips/adm5120/common/irq.c

@@ -16,10 +16,10 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/io.h>
+#include <linux/bitops.h>
 
 #include <asm/irq_cpu.h>
 #include <asm/mipsregs.h>
-#include <asm/bitops.h>
 
 #include <asm/mach-adm5120/adm5120_defs.h>
 
@@ -42,16 +42,16 @@ static inline u32 intc_read_reg(unsigned int reg)
 }
 
 static struct irq_chip adm5120_intc_irq_chip = {
-	.name 		= "INTC",
+	.name		= "INTC",
-	.unmask 	= adm5120_intc_irq_unmask,
+	.unmask		= adm5120_intc_irq_unmask,
-	.mask 		= adm5120_intc_irq_mask,
+	.mask		= adm5120_intc_irq_mask,
 	.mask_ack	= adm5120_intc_irq_mask,
 	.set_type	= adm5120_intc_irq_set_type
 };
 
 static struct irqaction adm5120_intc_irq_action = {
-	.handler 	= no_action,
+	.handler	= no_action,
-	.name 		= "cascade [INTC]"
+	.name		= "cascade [INTC]"
 };
 
 static void adm5120_intc_irq_unmask(unsigned int irq)
@@ -170,7 +170,8 @@ static void __init adm5120_intc_irq_init(void)
 	setup_irq(ADM5120_IRQ_INTC, &adm5120_intc_irq_action);
 }
 
-void __init arch_init_irq(void) {
+void __init arch_init_irq(void)
+{
 	mips_cpu_irq_init();
 	adm5120_intc_irq_init();
 }

target/linux/adm5120/files/arch/mips/adm5120/common/prom.c

@@ -67,7 +67,7 @@ static struct board_desc common_boards[] __initdata = {
 	/* OSBRiDGE boards */
 	DEFBOARD("OSBRiDGE 5GXi",	MACH_ADM5120_5GXI),
 	/* Motorola boards */
-	DEFBOARD("Powerline MU Gateway",MACH_ADM5120_PMUGW),
+	DEFBOARD("Powerline MU Gateway", MACH_ADM5120_PMUGW),
 	/* Generic EB-214A */
 	DEFBOARD("ADM5120",	MACH_ADM5120_EB_214A),
 };
@@ -249,7 +249,7 @@ static void __init prom_init_cmdline(void)
 
 }
 #else
-static void inline prom_init_cmdline(void) {}
+static inline void prom_init_cmdline(void) {}
 #endif /* CONFIG_IMAGE_CMDLINE_HACK */
 
 void __init prom_init(void)

target/linux/adm5120/files/arch/mips/adm5120/common/setup.c

@@ -20,10 +20,12 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
+#include <linux/reboot.h>
+#include <linux/time.h>
 
-#include <asm/bootinfo.h>
 #include <asm/reboot.h>
 #include <asm/time.h>
+#include <asm/bootinfo.h>
 #include <asm/mips_machine.h>
 
 #include <asm/mach-adm5120/adm5120_info.h>
@@ -49,7 +51,7 @@ static void __init adm5120_report(void)
 {
 	printk(KERN_INFO "SoC      : %s\n", adm5120_sys_type);
 	printk(KERN_INFO "Bootdev  : %s flash\n",
-		adm5120_nand_boot ? "NAND":"NOR");
+		adm5120_nand_boot ? "NAND" : "NOR");
 	printk(KERN_INFO "Prom     : %s\n", prom_names[adm5120_prom_type]);
 }
 

target/linux/adm5120/files/arch/mips/adm5120/generic/eb-214a.c

@@ -103,7 +103,7 @@ static void __init eb214a_setup(void)
 	adm5120_add_device_gpio(EB214A_GPIO_DEV_MASK);
 
 	adm5120_add_device_uart(0);
-	//adm5120_add_device_uart(1);
+	/* adm5120_add_device_uart(1); */
 
 	adm5120_add_device_switch(5, eb214a_vlans);
 
@@ -117,7 +117,7 @@ static void __init eb214a_setup(void)
 
 	adm5120_pci_set_irq_map(ARRAY_SIZE(eb214a_pci_irqs),
 					eb214a_pci_irqs);
-//	adm5120_add_device_usb();
+	/* adm5120_add_device_usb(); */
 }
 
 MIPS_MACHINE(MACH_ADM5120_EB_214A, "EB-214A", "Generic EB-214A", eb214a_setup);

target/linux/adm5120/files/arch/mips/adm5120/mikrotik/rb-11x.c

@@ -13,8 +13,8 @@
 
 static struct gpio_led rb11x_gpio_leds[] __initdata = {
 	GPIO_LED_STD(ADM5120_GPIO_PIN3, "user",		NULL),
-	GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan_speed", 	NULL),
+	GPIO_LED_INV(ADM5120_GPIO_P0L1,	"lan_speed",	NULL),
-	GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan_lnkact", 	NULL),
+	GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan_lnkact",	NULL),
 };
 
 static u8 rb11x_vlans[6] __initdata = {

target/linux/adm5120/files/arch/mips/adm5120/mikrotik/rb-133.c

@@ -14,12 +14,12 @@
 static struct gpio_led rb133_gpio_leds[] __initdata = {
 	GPIO_LED_STD(ADM5120_GPIO_PIN6, "power",	NULL),
 	GPIO_LED_STD(ADM5120_GPIO_PIN5, "user",		NULL),
-	GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan1_speed", 	NULL),
+	GPIO_LED_INV(ADM5120_GPIO_P2L1,	"lan1_speed",	NULL),
-	GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan1_lnkact", 	NULL),
+	GPIO_LED_INV(ADM5120_GPIO_P2L0,	"lan1_lnkact",	NULL),
-	GPIO_LED_INV(ADM5120_GPIO_P1L1, "lan2_speed", 	NULL),
+	GPIO_LED_INV(ADM5120_GPIO_P1L1,	"lan2_speed",	NULL),
-	GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan2_lnkact", 	NULL),
+	GPIO_LED_INV(ADM5120_GPIO_P1L0,	"lan2_lnkact",	NULL),
-	GPIO_LED_INV(ADM5120_GPIO_P0L1, "lan3_speed", 	NULL),
+	GPIO_LED_INV(ADM5120_GPIO_P0L1,	"lan3_speed",	NULL),
-	GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan3_lnkact", 	NULL),
+	GPIO_LED_INV(ADM5120_GPIO_P0L0,	"lan3_lnkact",	NULL),
 };
 
 static u8 rb133_vlans[6] __initdata = {

target/linux/adm5120/files/arch/mips/adm5120/mikrotik/rb-133c.c

@@ -14,8 +14,8 @@
 static struct gpio_led rb133c_gpio_leds[] __initdata = {
 	GPIO_LED_STD(ADM5120_GPIO_PIN6, "power",	NULL),
 	GPIO_LED_STD(ADM5120_GPIO_PIN5, "user",		NULL),
-	GPIO_LED_INV(ADM5120_GPIO_P2L1, "lan1_speed", 	NULL),
+	GPIO_LED_INV(ADM5120_GPIO_P2L1,	"lan1_speed",	NULL),
-	GPIO_LED_INV(ADM5120_GPIO_P2L0, "lan1_lnkact", 	NULL),
+	GPIO_LED_INV(ADM5120_GPIO_P2L0,	"lan1_lnkact",	NULL),
 };
 
 static u8 rb133c_vlans[6] __initdata = {

target/linux/adm5120/files/arch/mips/adm5120/mikrotik/rb-150.c

@@ -20,7 +20,7 @@
 #define RB150_GPIO_NAND_ALE	ADM5120_GPIO_P3L2
 #define RB150_GPIO_RESET_BUTTON	ADM5120_GPIO_PIN1 /* FIXME */
 
-#define RB150_GPIO_DEV_MASK	( 1 << RB150_GPIO_NAND_READY	\
+#define RB150_GPIO_DEV_MASK	(1 << RB150_GPIO_NAND_READY	\
 				| 1 << RB150_GPIO_NAND_NCE	\
 				| 1 << RB150_GPIO_NAND_CLE	\
 				| 1 << RB150_GPIO_NAND_ALE)

target/linux/adm5120/files/arch/mips/adm5120/mikrotik/rb-153.c

@@ -11,9 +11,9 @@
 
 #include "rb-1xx.h"
 
-#define RB153_GPIO_DEV_MASK	( 1 << ADM5120_GPIO_PIN0 \
+#define RB153_GPIO_DEV_MASK	(1 << ADM5120_GPIO_PIN0 \
 				| 1 << ADM5120_GPIO_PIN3 \
-				| 1 << ADM5120_GPIO_PIN4 )
+				| 1 << ADM5120_GPIO_PIN4)
 
 static struct resource rb153_cf_resources[] __initdata = {
 	{

target/linux/adm5120/files/arch/mips/include/asm/mach-adm5120/adm5120_info.h

@@ -89,7 +89,7 @@ enum {
 
 /*
  * TODO:remove adm5120_eth* variables when the switch driver will be
- * 	converted into a real platform driver
+ *	converted into a real platform driver
  */
 extern unsigned int adm5120_eth_num_ports;
 extern unsigned char adm5120_eth_macs[6][6];

target/linux/adm5120/files/arch/mips/include/asm/mach-adm5120/adm5120_intc.h

@@ -48,16 +48,16 @@
 /*
  * INTC register bits
  */
-#define INTC_INT_TIMER	( 1 << INTC_IRQ_TIMER )
+#define INTC_INT_TIMER	(1 << INTC_IRQ_TIMER)
-#define INTC_INT_UART0	( 1 << INTC_IRQ_UART0 )
+#define INTC_INT_UART0	(1 << INTC_IRQ_UART0)
-#define INTC_INT_UART1	( 1 << INTC_IRQ_UART1 )
+#define INTC_INT_UART1	(1 << INTC_IRQ_UART1)
-#define INTC_INT_USBC	( 1 << INTC_IRQ_USBC )
+#define INTC_INT_USBC	(1 << INTC_IRQ_USBC)
-#define INTC_INT_INTX0	( 1 << INTC_IRQ_INTX0 )
+#define INTC_INT_INTX0	(1 << INTC_IRQ_INTX0)
-#define INTC_INT_INTX1	( 1 << INTC_IRQ_INTX1 )
+#define INTC_INT_INTX1	(1 << INTC_IRQ_INTX1)
-#define INTC_INT_PCI0	( 1 << INTC_IRQ_PCI0 )
+#define INTC_INT_PCI0	(1 << INTC_IRQ_PCI0)
-#define INTC_INT_PCI1	( 1 << INTC_IRQ_PCI1 )
+#define INTC_INT_PCI1	(1 << INTC_IRQ_PCI1)
-#define INTC_INT_PCI2	( 1 << INTC_IRQ_PCI2 )
+#define INTC_INT_PCI2	(1 << INTC_IRQ_PCI2)
-#define INTC_INT_SWITCH	( 1 << INTC_IRQ_SWITCH )
+#define INTC_INT_SWITCH	(1 << INTC_IRQ_SWITCH)
-#define INTC_INT_ALL	(( 1 << INTC_IRQ_COUNT)-1)
+#define INTC_INT_ALL	((1 << INTC_IRQ_COUNT) - 1)
 
 #endif /* _MACH_ADM5120_INTC_H */

target/linux/adm5120/files/arch/mips/include/asm/mach-adm5120/adm5120_mpmc.h

@@ -44,25 +44,25 @@
 #define MPMC_REG_SC3    0x0260
 
 /* Control register bits */
-#define MPMC_CTRL_AM		( 1 << 1 )	/* Address Mirror */
+#define MPMC_CTRL_AM		(1 << 1)	/* Address Mirror */
-#define MPMC_CTRL_LPM		( 1 << 2 )	/* Low Power Mode */
+#define MPMC_CTRL_LPM		(1 << 2)	/* Low Power Mode */
-#define MPMC_CTRL_DWB		( 1 << 3 )	/* Drain Write Buffers */
+#define MPMC_CTRL_DWB		(1 << 3)	/* Drain Write Buffers */
 
 /* Status register bits */
-#define MPMC_STATUS_BUSY	( 1 << 0 )	/* Busy */
+#define MPMC_STATUS_BUSY	(1 << 0)	/* Busy */
-#define MPMC_STATUS_WBS		( 1 << 1 )	/* Write Buffer Status */
+#define MPMC_STATUS_WBS		(1 << 1)	/* Write Buffer Status */
-#define MPMC_STATUS_SRA		( 1 << 2 )	/* Self-Refresh Acknowledge*/
+#define MPMC_STATUS_SRA		(1 << 2)	/* Self-Refresh Acknowledge*/
 
 /* Dynamic Control register bits */
-#define MPMC_DC_CE		( 1 << 0 )
+#define MPMC_DC_CE		(1 << 0)
-#define MPMC_DC_DMC		( 1 << 1 )
+#define MPMC_DC_DMC		(1 << 1)
-#define MPMC_DC_SRR		( 1 << 2 )
+#define MPMC_DC_SRR		(1 << 2)
 #define MPMC_DC_SI_SHIFT	7
-#define MPMC_DC_SI_MASK		( 3 << 7 )
+#define MPMC_DC_SI_MASK		(3 << 7)
-#define MPMC_DC_SI_NORMAL	( 0 << 7 )
+#define MPMC_DC_SI_NORMAL	(0 << 7)
-#define MPMC_DC_SI_MODE		( 1 << 7 )
+#define MPMC_DC_SI_MODE		(1 << 7)
-#define MPMC_DC_SI_PALL		( 2 << 7 )
+#define MPMC_DC_SI_PALL		(2 << 7)
-#define MPMC_DC_SI_NOP		( 3 << 7 )
+#define MPMC_DC_SI_NOP		(3 << 7)
 
 #define SRAM_REG_CONF	0x00
 #define SRAM_REG_WWE	0x04

target/linux/adm5120/files/arch/mips/include/asm/mach-adm5120/adm5120_nand.h

@@ -46,7 +46,7 @@
 #define NAND_READ_REG(r) \
 	readb((void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r))
 #define NAND_WRITE_REG(r, v) \
-	writeb((v),(void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r))
+	writeb((v), (void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r))
 
 /*-------------------------------------------------------------------------*/
 

target/linux/adm5120/files/arch/mips/include/asm/mach-adm5120/adm5120_platform.h

@@ -45,7 +45,7 @@ struct adm5120_pci_irq {
 	unsigned irq;
 };
 
-#define PCIIRQ(s,f,p,i) {.slot = (s), .func = (f), .pin  = (p), .irq  = (i)}
+#define PCIIRQ(s, f, p, i) {.slot = (s), .func = (f), .pin  = (p), .irq  = (i)}
 
 #ifdef CONFIG_PCI
 extern void adm5120_pci_set_irq_map(unsigned int nr_irqs,
@@ -73,7 +73,7 @@ extern void adm5120_add_device_gpio_buttons(unsigned nbuttons,
 
 #define GPIO_LED_DEF(g, n, t, a) {	\
 	.name = (n),			\
-	.default_trigger = (t), 	\
+	.default_trigger = (t),		\
 	.gpio = (g),			\
 	.active_low = (a)		\
 }

target/linux/adm5120/files/arch/mips/include/asm/mach-adm5120/adm5120_uart.h

@@ -27,38 +27,38 @@
 #define UART_REG_FLAG	0x18
 
 /* Receive Status Register bits */
-#define UART_RSR_FE	( 1 << 0 )
+#define UART_RSR_FE	(1 << 0)
-#define UART_RSR_PE	( 1 << 1 )
+#define UART_RSR_PE	(1 << 1)
-#define UART_RSR_BE	( 1 << 2 )
+#define UART_RSR_BE	(1 << 2)
-#define UART_RSR_OE	( 1 << 3 )
+#define UART_RSR_OE	(1 << 3)
-#define UART_RSR_ERR	( UART_RSR_FE | UART_RSR_PE | UART_RSR_BE )
+#define UART_RSR_ERR	(UART_RSR_FE | UART_RSR_PE | UART_RSR_BE)
 
 #define UART_ECR_ALL	0xFF
 
 /* Line Control High register bits */
-#define UART_LCRH_BRK	( 1 << 0 ) /* send break */
+#define UART_LCRH_BRK	(1 << 0) /* send break */
-#define UART_LCRH_PEN	( 1 << 1 ) /* parity enable */
+#define UART_LCRH_PEN	(1 << 1) /* parity enable */
-#define UART_LCRH_EPS	( 1 << 2 ) /* even parity select */
+#define UART_LCRH_EPS	(1 << 2) /* even parity select */
-#define UART_LCRH_STP1	( 0 << 3 ) /* one stop bits select */
+#define UART_LCRH_STP1	(0 << 3) /* one stop bits select */
-#define UART_LCRH_STP2	( 1 << 3 ) /* two stop bits select */
+#define UART_LCRH_STP2	(1 << 3) /* two stop bits select */
-#define UART_LCRH_FEN	( 1 << 4 ) /* FIFO enable */
+#define UART_LCRH_FEN	(1 << 4) /* FIFO enable */
 
-#define UART_LCRH_WLEN5	( 0 << 5 )
+#define UART_LCRH_WLEN5	(0 << 5)
-#define UART_LCRH_WLEN6	( 1 << 5 )
+#define UART_LCRH_WLEN6	(1 << 5)
-#define UART_LCRH_WLEN7	( 2 << 5 )
+#define UART_LCRH_WLEN7	(2 << 5)
-#define UART_LCRH_WLEN8	( 3 << 5 )
+#define UART_LCRH_WLEN8	(3 << 5)
 
 /* Control register bits */
-#define UART_CTRL_EN	( 1 << 0 )
+#define UART_CTRL_EN	(1 << 0)
 
 /* Flag register bits */
-#define UART_FLAG_CTS	( 1 << 0 )
+#define UART_FLAG_CTS	(1 << 0)
-#define UART_FLAG_DSR	( 1 << 1 )
+#define UART_FLAG_DSR	(1 << 1)
-#define UART_FLAG_DCD	( 1 << 2 )
+#define UART_FLAG_DCD	(1 << 2)
-#define UART_FLAG_BUSY	( 1 << 3 )
+#define UART_FLAG_BUSY	(1 << 3)
-#define UART_FLAG_RXFE	( 1 << 4 )
+#define UART_FLAG_RXFE	(1 << 4)
-#define UART_FLAG_TXFF	( 1 << 5 )
+#define UART_FLAG_TXFF	(1 << 5)
-#define UART_FLAG_RXFF	( 1 << 6 )
+#define UART_FLAG_RXFF	(1 << 6)
-#define UART_FLAG_TXFE	( 1 << 7 )
+#define UART_FLAG_TXFE	(1 << 7)
 
 #endif /* _MACH_ADM5120_UART_H */

target/linux/adm5120/files/arch/mips/pci/pci-adm5120.c

@@ -21,12 +21,12 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/io.h>
+#include <linux/delay.h>
 
 #include <linux/pci.h>
 #include <linux/pci_ids.h>
 #include <linux/pci_regs.h>
 
-#include <asm/delay.h>
 #include <asm/bootinfo.h>
 
 #include <asm/mach-adm5120/adm5120_defs.h>
@@ -71,8 +71,8 @@ static inline u32 read_cfgdata(void)
 
 static inline u32 mkaddr(struct pci_bus *bus, unsigned int devfn, int where)
 {
-	return (((bus->number & 0xFF) << 16) | ((devfn & 0xFF) << 8) | \
+	return ((bus->number & 0xFF) << 16) | ((devfn & 0xFF) << 8) | \
-		(where & 0xFC));
+		(where & 0xFC);
 }
 
 /* -------------------------------------------------------------------------*/

target/linux/adm5120/files/drivers/ata/pata_rb153_cf.c

@@ -140,7 +140,7 @@ static void rb153_pata_setup_port(struct ata_host *ah)
 	ap->pio_mask	= 0x1f; /* PIO4 */
 	ap->flags	= ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
 
-	ap->ioaddr.cmd_addr 	= info->iobase + RB153_CF_REG_CMD;
+	ap->ioaddr.cmd_addr	= info->iobase + RB153_CF_REG_CMD;
 	ap->ioaddr.ctl_addr	= info->iobase + RB153_CF_REG_CTRL;
 	ap->ioaddr.altstatus_addr = info->iobase + RB153_CF_REG_CTRL;
 

target/linux/adm5120/files/drivers/leds/ledtrig-adm5120-switch.c

@@ -31,7 +31,7 @@ struct port_state {
 	unsigned int value;
 };
 
-#define PORT_STATE(n,v) {.name = (n), .value = (v)}
+#define PORT_STATE(n, v) {.name = (n), .value = (v)}
 
 static struct port_state port_states[] = {
 	PORT_STATE("off",		LED_OFF),

target/linux/adm5120/files/drivers/mtd/maps/adm5120-flash.c

@@ -45,7 +45,7 @@
 
 struct adm5120_map_info {
 	struct map_info	map;
-	void 		(*switch_bank)(unsigned);
+	void		(*switch_bank)(unsigned);
 	unsigned long	window_size;
 };
 
@@ -89,7 +89,7 @@ static struct flash_desc flash_descs[2] = {
 	}
 };
 
-static const char *probe_types[] = {
+static const char const *probe_types[] = {
 	"cfi_probe",
 	"jedec_probe",
 	"map_rom",
@@ -97,7 +97,7 @@ static const char *probe_types[] = {
 };
 
 #ifdef CONFIG_MTD_PARTITIONS
-static const char *parse_types[] = {
+static const char const *parse_types[] = {
 	"cmdlinepart",
 #ifdef CONFIG_MTD_REDBOOT_PARTS
 	"RedBoot",

target/linux/adm5120/files/drivers/mtd/trxsplit.c

@@ -28,7 +28,7 @@
 #define TRX_NO_HEADER	0x1	/* do not write TRX header */
 #define TRX_GZ_FILES	0x2     /* contains individual gzip files */
 #define TRX_MAX_OFFSET	3
-#define TRX_MIN_KERNEL_SIZE	256*1024
+#define TRX_MIN_KERNEL_SIZE	(256 * 1024)
 
 struct trx_header {
 	u32 magic;	/* "HDR0" */

target/linux/adm5120/files/drivers/net/adm5120sw.c

@@ -64,7 +64,7 @@
 
 #define TX_RING_SIZE	32
 #define TX_QUEUE_LEN	28	/* Limit ring entries actually used. */
-#define TX_TIMEOUT	HZ*400
+#define TX_TIMEOUT	(HZ * 400)
 
 #define RX_DESCS_SIZE	(RX_RING_SIZE * sizeof(struct dma_desc *))
 #define RX_SKBS_SIZE	(RX_RING_SIZE * sizeof(struct sk_buff *))
@@ -232,7 +232,7 @@ static void sw_dump_desc(char *label, struct dma_desc *desc, int tx)
 	t = desc->buf2;
 	SW_DBG("    buf2 %08X addr=%08X%s\n", desc->buf2,
 		t & DESC_ADDR_MASK,
-		(t & DESC_BUF2_EN) ? " EN" : "" );
+		(t & DESC_BUF2_EN) ? " EN" : "");
 
 	t = desc->misc;
 	if (tx)
@@ -553,13 +553,11 @@ static irqreturn_t adm5120_switch_irq(int irq, void *dev_id)
 #else
 	sw_int_ack(status);
 
-	if (status & (SWITCH_INT_RLD | SWITCH_INT_LDF)) {
+	if (status & (SWITCH_INT_RLD | SWITCH_INT_LDF))
 		adm5120_switch_rx(RX_RING_SIZE);
-	}
 
-	if (status & SWITCH_INT_SLD) {
+	if (status & SWITCH_INT_SLD)
 		adm5120_switch_tx();
-	}
 #endif
 
 	return IRQ_HANDLED;
@@ -589,7 +587,7 @@ static void adm5120_switch_tx_ring_reset(struct dma_desc *desc,
 {
 	memset(desc, 0, num * sizeof(*desc));
 	desc[num-1].buf1 |= DESC_EOR;
-	memset(skbl, 0, sizeof(struct skb*)*num);
+	memset(skbl, 0, sizeof(struct skb *) * num);
 
 	cur_txl = 0;
 	dirty_txl = 0;
@@ -608,7 +606,7 @@ static void adm5120_switch_rx_ring_reset(struct dma_desc *desc,
 			break;
 		}
 		skb_reserve(skbl[i], SKB_RESERVE_LEN);
-		adm5120_rx_dma_update(&desc[i], skbl[i], (num-1==i));
+		adm5120_rx_dma_update(&desc[i], skbl[i], (num - 1 == i));
 	}
 
 	cur_rxl = 0;
@@ -721,7 +719,8 @@ static void adm5120_write_mac(struct net_device *dev)
 
 	sw_write_reg(SWITCH_REG_MAC_WT0, t);
 
-	while (!(sw_read_reg(SWITCH_REG_MAC_WT0) & MAC_WT0_MWD));
+	while (!(sw_read_reg(SWITCH_REG_MAC_WT0) & MAC_WT0_MWD))
+		;
 }
 
 static void adm5120_set_vlan(char *matrix)
@@ -735,9 +734,10 @@ static void adm5120_set_vlan(char *matrix)
 	sw_write_reg(SWITCH_REG_VLAN_G2, val);
 
 	/* Now set/update the port vs. device lookup table */
-	for (port=0; port<SWITCH_NUM_PORTS; port++) {
+	for (port = 0; port < SWITCH_NUM_PORTS; port++) {
-		for (vlan_port=0; vlan_port<SWITCH_NUM_PORTS && !(matrix[vlan_port] & (0x00000001 << port)); vlan_port++);
+		for (vlan_port = 0; vlan_port < SWITCH_NUM_PORTS && !(matrix[vlan_port] & (0x00000001 << port)); vlan_port++)
-		if (vlan_port <SWITCH_NUM_PORTS)
+			;
+		if (vlan_port < SWITCH_NUM_PORTS)
 			adm5120_port[port] = adm5120_devs[vlan_port];
 		else
 			adm5120_port[port] = NULL;
@@ -891,7 +891,7 @@ static int adm5120_if_hard_start_xmit(struct sk_buff *skb,
 	data |= DESC_ADDR(skb->data);
 
 	desc->misc =
-	    ((skb->len<ETH_ZLEN?ETH_ZLEN:skb->len) << DESC_PKTLEN_SHIFT) |
+	    ((skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len) << DESC_PKTLEN_SHIFT) |
 	    (0x1 << priv->vlan_no);
 
 	desc->buflen = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
@@ -917,7 +917,7 @@ static int adm5120_if_hard_start_xmit(struct sk_buff *skb,
 
 static void adm5120_if_tx_timeout(struct net_device *dev)
 {
-	SW_INFO("TX timeout on %s\n",dev->name);
+	SW_INFO("TX timeout on %s\n", dev->name);
 }
 
 static void adm5120_if_set_multicast_list(struct net_device *dev)
@@ -990,7 +990,7 @@ static int adm5120_if_do_ioctl(struct net_device *dev, struct ifreq *rq,
 	struct adm5120_sw_info info;
 	struct adm5120_if_priv *priv = netdev_priv(dev);
 
-	switch(cmd) {
+	switch (cmd) {
 	case SIOCGADMINFO:
 		info.magic = 0x5120;
 		info.ports = adm5120_nrdevs;
@@ -1021,15 +1021,15 @@ static int adm5120_if_do_ioctl(struct net_device *dev, struct ifreq *rq,
 }
 
 static const struct net_device_ops adm5120sw_netdev_ops = {
-        .ndo_open               = adm5120_if_open,
+	.ndo_open		= adm5120_if_open,
-        .ndo_stop               = adm5120_if_stop,
+	.ndo_stop		= adm5120_if_stop,
-        .ndo_start_xmit         = adm5120_if_hard_start_xmit,
+	.ndo_start_xmit		= adm5120_if_hard_start_xmit,
-        .ndo_set_multicast_list = adm5120_if_set_multicast_list,
+	.ndo_set_multicast_list	= adm5120_if_set_multicast_list,
-        .ndo_do_ioctl           = adm5120_if_do_ioctl,
+	.ndo_do_ioctl		= adm5120_if_do_ioctl,
-        .ndo_tx_timeout         = adm5120_if_tx_timeout,
+	.ndo_tx_timeout		= adm5120_if_tx_timeout,
-        .ndo_validate_addr      = eth_validate_addr,
+	.ndo_validate_addr	= eth_validate_addr,
-        .ndo_change_mtu         = eth_change_mtu,
+	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_set_mac_address    = adm5120_if_set_mac_address,
+	.ndo_set_mac_address	= adm5120_if_set_mac_address,
 };
 
 static struct net_device *adm5120_if_alloc(void)
@@ -1046,7 +1046,7 @@ static struct net_device *adm5120_if_alloc(void)
 
 	dev->irq		= ADM5120_IRQ_SWITCH;
 	dev->netdev_ops		= &adm5120sw_netdev_ops;
-	dev->watchdog_timeo 	= TX_TIMEOUT;
+	dev->watchdog_timeo	= TX_TIMEOUT;
 
 #ifdef CONFIG_ADM5120_SWITCH_NAPI
 	netif_napi_add(dev, &priv->napi, adm5120_if_poll, 64);

target/linux/adm5120/files/drivers/net/adm5120sw.h

@@ -11,8 +11,8 @@
 #define _INCLUDE_ADM5120SW_H_
 
 #define SIOCSMATRIX	SIOCDEVPRIVATE
-#define SIOCGMATRIX	SIOCDEVPRIVATE+1
+#define SIOCGMATRIX	(SIOCDEVPRIVATE + 1)
-#define SIOCGADMINFO	SIOCDEVPRIVATE+2
+#define SIOCGADMINFO	(SIOCDEVPRIVATE + 2)
 
 struct adm5120_sw_info {
 	u16	magic;

target/linux/adm5120/files/drivers/usb/host/adm5120-dbg.c

@@ -98,9 +98,9 @@ urb_print(struct admhcd *ahcd, struct urb *urb, char *str, int small, int status
 			"stat=%d\n",
 			str,
 			urb,
-			usb_pipedevice (pipe),
+			usb_pipedevice(pipe),
-			usb_pipeendpoint (pipe),
+			usb_pipeendpoint(pipe),
-			usb_pipeout(pipe)? "out" : "in",
+			usb_pipeout(pipe) ? "out" : "in",
 			pipestring(pipe),
 			urb->transfer_flags,
 			urb->actual_length,
@@ -114,18 +114,18 @@ urb_print(struct admhcd *ahcd, struct urb *urb, char *str, int small, int status
 		if (usb_pipecontrol(pipe)) {
 			admhc_dbg(ahcd, "setup(8):");
 			for (i = 0; i < 8 ; i++)
-				printk (" %02x", ((__u8 *) urb->setup_packet) [i]);
+				printk(KERN_INFO" %02x", ((__u8 *)urb->setup_packet)[i]);
-			printk ("\n");
+			printk(KERN_INFO "\n");
 		}
 		if (urb->transfer_buffer_length > 0 && urb->transfer_buffer) {
 			admhc_dbg(ahcd, "data(%d/%d):",
 				urb->actual_length,
 				urb->transfer_buffer_length);
-			len = usb_pipeout(pipe)?
+			len = usb_pipeout(pipe) ?
-						urb->transfer_buffer_length: urb->actual_length;
+						urb->transfer_buffer_length : urb->actual_length;
 			for (i = 0; i < 16 && i < len; i++)
-				printk(" %02x", ((__u8 *)urb->transfer_buffer)[i]);
+				printk(KERN_INFO " %02x", ((__u8 *)urb->transfer_buffer)[i]);
-			printk("%s stat:%d\n", i < len? "...": "", status);
+			printk(KERN_INFO "%s stat:%d\n", i < len ? "..." : "", status);
 		}
 	}
 #endif /* ADMHC_VERBOSE_DEBUG */
@@ -133,12 +133,12 @@ urb_print(struct admhcd *ahcd, struct urb *urb, char *str, int small, int status
 
 #define admhc_dbg_sw(ahcd, next, size, format, arg...) \
 	do { \
-	if (next) { \
+		if (next) { \
-		unsigned s_len; \
+			unsigned s_len; \
-		s_len = scnprintf(*next, *size, format, ## arg ); \
+			s_len = scnprintf(*next, *size, format, ## arg); \
-		*size -= s_len; *next += s_len; \
+			*size -= s_len; *next += s_len; \
-	} else \
+		} else \
-		admhc_dbg(ahcd,format, ## arg ); \
+			admhc_dbg(ahcd, format, ## arg); \
 	} while (0);
 
 
@@ -170,7 +170,7 @@ static void maybe_print_eds(struct admhcd *ahcd, char *label, u32 value,
 		admhc_dbg_sw(ahcd, next, size, "%s %08x\n", label, value);
 }
 
-static char *buss2string (int state)
+static char *buss2string(int state)
 {
 	switch (state) {
 	case ADMHC_BUSS_RESET:
@@ -220,7 +220,7 @@ admhc_dump_status(struct admhcd *ahcd, char **next, unsigned *size)
 			admhc_readl(ahcd, &regs->hosthead), next, size);
 }
 
-#define dbg_port_sw(hc,num,value,next,size) \
+#define dbg_port_sw(hc, num, value, next, size) \
 	admhc_dbg_sw(hc, next, size, \
 		"portstatus [%d] " \
 		"0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
@@ -286,7 +286,7 @@ static void admhc_dump(struct admhcd *ahcd, int verbose)
 
 	/* dumps some of the state we know about */
 	admhc_dump_status(ahcd, NULL, NULL);
-	admhc_dbg(ahcd,"current frame #%04x\n",
+	admhc_dbg(ahcd, "current frame #%04x\n",
 		admhc_frame_no(ahcd));
 
 	admhc_dump_roothub(ahcd, verbose, NULL, NULL);
@@ -348,7 +348,7 @@ admhc_dump_ed(const struct admhcd *ahcd, const char *label,
 	tmp = hc32_to_cpup(ahcd, &ed->hwHeadP);
 	admhc_dbg(ahcd, "  tds: head %08x tail %08x %s%s%s\n",
 		tmp & TD_MASK,
-		hc32_to_cpup (ahcd, &ed->hwTailP),
+		hc32_to_cpup(ahcd, &ed->hwTailP),
 		(tmp & ED_C) ? data1 : data0,
 		(tmp & ED_H) ? " HALT" : "",
 		verbose ? " td list follows" : " (not listing)");
@@ -362,7 +362,7 @@ admhc_dump_ed(const struct admhcd *ahcd, const char *label,
 		list_for_each(tmp, &ed->td_list) {
 			struct td		*td;
 			td = list_entry(tmp, struct td, td_list);
-			admhc_dump_td (ahcd, "  ->", td);
+			admhc_dump_td(ahcd, "  ->", td);
 		}
 	}
 }
@@ -447,7 +447,7 @@ show_list(struct admhcd *ahcd, char *buf, size_t count, struct ed *ed)
 			" h:%08x t:%08x",
 			ed,
 			ed_statestring(ed->state),
-			ed_typestring (ed->type),
+			ed_typestring(ed->type),
 			(info & ED_SPEED_FULL) ? 'f' : 'l',
 			info & ED_FA_MASK,
 			(info >> ED_EN_SHIFT) & ED_EN_MASK,
@@ -458,7 +458,7 @@ show_list(struct admhcd *ahcd, char *buf, size_t count, struct ed *ed)
 			(info & ED_SKIP) ? " S" : "",
 			(headp & ED_H) ? " H" : "",
 			(headp & ED_C) ? data1 : data0,
-			headp & ED_MASK,tailp);
+			headp & ED_MASK, tailp);
 		size -= temp;
 		buf += temp;
 
@@ -466,9 +466,9 @@ show_list(struct admhcd *ahcd, char *buf, size_t count, struct ed *ed)
 			u32		dbp, cbl;
 
 			td = list_entry(entry, struct td, td_list);
-			info = hc32_to_cpup (ahcd, &td->hwINFO);
+			info = hc32_to_cpup(ahcd, &td->hwINFO);
-			dbp = hc32_to_cpup (ahcd, &td->hwDBP);
+			dbp = hc32_to_cpup(ahcd, &td->hwDBP);
-			cbl = hc32_to_cpup (ahcd, &td->hwCBL);
+			cbl = hc32_to_cpup(ahcd, &td->hwCBL);
 
 			temp = scnprintf(buf, size,
 				"\n\ttd/%p %s %d %s%scc=%x urb %p (%08x,%08x)",
@@ -477,7 +477,7 @@ show_list(struct admhcd *ahcd, char *buf, size_t count, struct ed *ed)
 				TD_BL_GET(cbl),
 				(info & TD_OWN) ? "" : "DONE ",
 				(cbl & TD_IE) ? "IE " : "",
-				TD_CC_GET (info), td->urb, info, cbl);
+				TD_CC_GET(info), td->urb, info, cbl);
 			size -= temp;
 			buf += temp;
 		}
@@ -525,7 +525,8 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
 	char			*next;
 	unsigned		i;
 
-	if (!(seen = kmalloc(DBG_SCHED_LIMIT * sizeof *seen, GFP_ATOMIC)))
+	seen = kmalloc(DBG_SCHED_LIMIT * sizeof(*seen), GFP_ATOMIC);
+	if (!seen)
 		return 0;
 	seen_count = 0;
 
@@ -542,10 +543,11 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
 	/* dump a snapshot of the periodic schedule (and load) */
 	spin_lock_irqsave(&ahcd->lock, flags);
 	for (i = 0; i < NUM_INTS; i++) {
-		if (!(ed = ahcd->periodic [i]))
+		ed = ahcd->periodic[i];
+		if (!ed)
 			continue;
 
-		temp = scnprintf(next, size, "%2d [%3d]:", i, ahcd->load [i]);
+		temp = scnprintf(next, size, "%2d [%3d]:", i, ahcd->load[i]);
 		size -= temp;
 		next += temp;
 
@@ -555,18 +557,18 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
 			size -= temp;
 			next += temp;
 			for (temp = 0; temp < seen_count; temp++) {
-				if (seen [temp] == ed)
+				if (seen[temp] == ed)
 					break;
 			}
 
 			/* show more info the first time around */
 			if (temp == seen_count) {
-				u32	info = hc32_to_cpu (ahcd, ed->hwINFO);
+				u32	info = hc32_to_cpu(ahcd, ed->hwINFO);
 				struct list_head	*entry;
 				unsigned		qlen = 0;
 
 				/* qlen measured here in TDs, not urbs */
-				list_for_each (entry, &ed->td_list)
+				list_for_each(entry, &ed->td_list)
 					qlen++;
 				temp = scnprintf(next, size,
 					" (%cs dev%d ep%d%s qlen %u"
@@ -586,7 +588,7 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
 				next += temp;
 
 				if (seen_count < DBG_SCHED_LIMIT)
-					seen [seen_count++] = ed;
+					seen[seen_count++] = ed;
 
 				ed = ed->ed_next;
 
@@ -603,7 +605,7 @@ static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
 		next += temp;
 	}
 	spin_unlock_irqrestore(&ahcd->lock, flags);
-	kfree (seen);
+	kfree(seen);
 
 	return PAGE_SIZE - size;
 }

target/linux/adm5120/files/drivers/usb/host/adm5120-drv.c

@@ -114,7 +114,7 @@ static void admhc_adm5120_remove(struct usb_hcd *hcd,
 static int __devinit
 admhc_adm5120_start(struct usb_hcd *hcd)
 {
-	struct admhcd	*ahcd = hcd_to_admhcd (hcd);
+	struct admhcd	*ahcd = hcd_to_admhcd(hcd);
 	int		ret;
 
 	ret = admhc_init(ahcd);

target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c

@@ -36,8 +36,8 @@
 #include <linux/dmapool.h>
 #include <linux/reboot.h>
 #include <linux/debugfs.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/unaligned.h>
@@ -58,12 +58,12 @@
 #define	OHCI_CONTROL_INIT	OHCI_CTRL_CBSR
 
 #define	ADMHC_INTR_INIT \
-		( ADMHC_INTR_MIE | ADMHC_INTR_INSM | ADMHC_INTR_FATI \
+		(ADMHC_INTR_MIE | ADMHC_INTR_INSM | ADMHC_INTR_FATI \
-		| ADMHC_INTR_RESI | ADMHC_INTR_TDC | ADMHC_INTR_BABI )
+		| ADMHC_INTR_RESI | ADMHC_INTR_TDC | ADMHC_INTR_BABI)
 
 /*-------------------------------------------------------------------------*/
 
-static const char hcd_name [] = "admhc-hcd";
+static const char hcd_name[] = "admhc-hcd";
 
 #define	STATECHANGE_DELAY	msecs_to_jiffies(300)
 
@@ -128,7 +128,7 @@ static int admhc_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 		else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
 			&& (urb->transfer_buffer_length
 				% usb_maxpacket(urb->dev, pipe,
-					usb_pipeout (pipe))) == 0)
+					usb_pipeout(pipe))) == 0)
 			td_cnt++;
 		break;
 	case PIPE_INTERRUPT:
@@ -302,8 +302,8 @@ sanitize:
 		goto rescan;
 	case ED_IDLE:		/* fully unlinked */
 		if (list_empty(&ed->td_list)) {
-			td_free (ahcd, ed->dummy);
+			td_free(ahcd, ed->dummy);
-			ed_free (ahcd, ed);
+			ed_free(ahcd, ed);
 			break;
 		}
 		/* else FALL THROUGH */
@@ -340,7 +340,7 @@ static void admhc_usb_reset(struct admhcd *ahcd)
 #else
 	/* FIXME */
 	ahcd->host_control = ADMHC_BUSS_RESET;
-	admhc_writel(ahcd, ahcd->host_control ,&ahcd->regs->host_control);
+	admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control);
 #endif
 }
 
@@ -642,7 +642,7 @@ static irqreturn_t admhc_irq(struct usb_hcd *hcd)
 {
 	struct admhcd *ahcd = hcd_to_admhcd(hcd);
 	struct admhcd_regs __iomem *regs = ahcd->regs;
- 	u32 ints;
+	u32 ints;
 
 	ints = admhc_readl(ahcd, &regs->int_status);
 	if ((ints & ADMHC_INTR_INTA) == 0) {
@@ -798,7 +798,7 @@ static int __init admhc_hcd_mod_init(void)
 
 	pr_info("%s: " DRIVER_INFO "\n", hcd_name);
 	pr_info("%s: block sizes: ed %Zd td %Zd\n", hcd_name,
-		sizeof (struct ed), sizeof (struct td));
+		sizeof(struct ed), sizeof(struct td));
 
 #ifdef DEBUG
 	admhc_debug_root = debugfs_create_dir("admhc", NULL);

target/linux/adm5120/files/drivers/usb/host/adm5120-hub.c

@@ -19,7 +19,7 @@
  * ADM5120 Root Hub ... the nonsharable stuff
  */
 
-#define dbg_port(hc,label,num,value) \
+#define dbg_port(hc, label, num, value) \
 	admhc_dbg(hc, \
 		"%s port%d " \
 		"= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
@@ -40,7 +40,7 @@
 		(value & ADMHC_PS_CCS) ? " CCS" : "" \
 		);
 
-#define dbg_port_write(hc,label,num,value) \
+#define dbg_port_write(hc, label, num, value) \
 	admhc_dbg(hc, \
 		"%s port%d " \
 		"= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
@@ -81,11 +81,11 @@ admhc_hub_status_data(struct usb_hcd *hcd, char *buf)
 	/* init status */
 	status = admhc_read_rhdesc(ahcd);
 	if (status & (ADMHC_RH_LPSC | ADMHC_RH_OCIC))
-		buf [0] = changed = 1;
+		buf[0] = changed = 1;
 	else
-		buf [0] = 0;
+		buf[0] = 0;
 	if (ahcd->num_ports > 7) {
-		buf [1] = 0;
+		buf[1] = 0;
 		length++;
 	}
 
@@ -100,9 +100,9 @@ admhc_hub_status_data(struct usb_hcd *hcd, char *buf)
 				| ADMHC_PS_OCIC | ADMHC_PS_PRSC)) {
 			changed = 1;
 			if (i < 7)
-			    buf [0] |= 1 << (i + 1);
+				buf[0] |= 1 << (i + 1);
 			else
-			    buf [1] |= 1 << (i - 7);
+				buf[1] |= 1 << (i - 7);
 		}
 	}
 
@@ -247,7 +247,7 @@ static void start_hnp(struct admhcd *ahcd);
 #define	PORT_RESET_HW_MSEC	10
 
 /* wrap-aware logic morphed from <linux/jiffies.h> */
-#define tick_before(t1,t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0)
+#define tick_before(t1, t2) ((s16)(((s16)(t1)) - ((s16)(t2))) < 0)
 
 /* called from some task, normally khubd */
 static inline int admhc_port_reset(struct admhcd *ahcd, unsigned port)

target/linux/adm5120/files/drivers/usb/host/adm5120-mem.c

@@ -125,10 +125,10 @@ static void td_free(struct admhcd *ahcd, struct td *td)
 #if 0
 	/* TODO: remove */
 	else if ((td->hwINFO & cpu_to_hc32(ahcd, TD_DONE)) != 0)
-		admhc_dbg (ahcd, "no hash for td %p\n", td);
+		admhc_dbg(ahcd, "no hash for td %p\n", td);
 #else
 	else if ((td->flags & TD_FLAG_DONE) != 0)
-		admhc_dbg (ahcd, "no hash for td %p\n", td);
+		admhc_dbg(ahcd, "no hash for td %p\n", td);
 #endif
 	dma_pool_free(ahcd->td_cache, td, td->td_dma);
 }

target/linux/adm5120/files/drivers/usb/host/adm5120-q.c

@@ -42,7 +42,7 @@ __acquires(ahcd->lock)
 	}
 
 #ifdef ADMHC_VERBOSE_DEBUG
-	urb_print(ahcd, urb, "RET", usb_pipeout (urb->pipe), status);
+	urb_print(ahcd, urb, "RET", usb_pipeout(urb->pipe), status);
 #endif
 
 	/* urb->complete() can reenter this HCD */
@@ -73,12 +73,12 @@ static int balance(struct admhcd *ahcd, int interval, int load)
 	 * that has enough bandwidth left unreserved.
 	 */
 	for (i = 0; i < interval ; i++) {
-		if (branch < 0 || ahcd->load [branch] > ahcd->load [i]) {
+		if (branch < 0 || ahcd->load[branch] > ahcd->load[i]) {
 			int	j;
 
 			/* usb 1.1 says 90% of one frame */
 			for (j = i; j < NUM_INTS; j += interval) {
-				if ((ahcd->load [j] + load) > 900)
+				if ((ahcd->load[j] + load) > 900)
 					break;
 			}
 			if (j < NUM_INTS)
@@ -97,17 +97,17 @@ static int balance(struct admhcd *ahcd, int interval, int load)
  * into the schedule tree in the apppropriate place.  most iso devices use
  * 1msec periods, but that's not required.
  */
-static void periodic_link (struct admhcd *ahcd, struct ed *ed)
+static void periodic_link(struct admhcd *ahcd, struct ed *ed)
 {
 	unsigned	i;
 
-	admhc_vdbg (ahcd, "link %sed %p branch %d [%dus.], interval %d\n",
+	admhc_vdbg(ahcd, "link %sed %p branch %d [%dus.], interval %d\n",
 		(ed->hwINFO & cpu_to_hc32(ahcd, ED_ISO)) ? "iso " : "",
 		ed, ed->branch, ed->load, ed->interval);
 
 	for (i = ed->branch; i < NUM_INTS; i += ed->interval) {
-		struct ed	**prev = &ahcd->periodic [i];
+		struct ed	**prev = &ahcd->periodic[i];
-		__hc32		*prev_p = &ahcd->hcca->int_table [i];
+		__hc32		*prev_p = &ahcd->hcca->int_table[i];
 		struct ed	*here = *prev;
 
 		/* sorting each branch by period (slow before fast)
@@ -125,12 +125,12 @@ static void periodic_link (struct admhcd *ahcd, struct ed *ed)
 			ed->ed_next = here;
 			if (here)
 				ed->hwNextED = *prev_p;
-			wmb ();
+			wmb();
 			*prev = ed;
 			*prev_p = cpu_to_hc32(ahcd, ed->dma);
 			wmb();
 		}
-		ahcd->load [i] += ed->load;
+		ahcd->load[i] += ed->load;
 	}
 	admhcd_to_hcd(ahcd)->self.bandwidth_allocated += ed->load / ed->interval;
 }
@@ -170,14 +170,14 @@ static int ed_schedule(struct admhcd *ahcd, struct ed *ed)
 
 #if 0	/* FIXME */
 /* scan the periodic table to find and unlink this ED */
-static void periodic_unlink (struct admhcd *ahcd, struct ed *ed)
+static void periodic_unlink(struct admhcd *ahcd, struct ed *ed)
 {
 	int	i;
 
 	for (i = ed->branch; i < NUM_INTS; i += ed->interval) {
 		struct ed	*temp;
-		struct ed	**prev = &ahcd->periodic [i];
+		struct ed	**prev = &ahcd->periodic[i];
-		__hc32		*prev_p = &ahcd->hcca->int_table [i];
+		__hc32		*prev_p = &ahcd->hcca->int_table[i];
 
 		while (*prev && (temp = *prev) != ed) {
 			prev_p = &temp->hwNextED;
@@ -187,11 +187,11 @@ static void periodic_unlink (struct admhcd *ahcd, struct ed *ed)
 			*prev_p = ed->hwNextED;
 			*prev = ed->ed_next;
 		}
-		ahcd->load [i] -= ed->load;
+		ahcd->load[i] -= ed->load;
 	}
 
 	admhcd_to_hcd(ahcd)->self.bandwidth_allocated -= ed->load / ed->interval;
-	admhc_vdbg (ahcd, "unlink %sed %p branch %d [%dus.], interval %d\n",
+	admhc_vdbg(ahcd, "unlink %sed %p branch %d [%dus.], interval %d\n",
 		(ed->hwINFO & cpu_to_hc32(ahcd, ED_ISO)) ? "iso " : "",
 		ed, ed->branch, ed->load, ed->interval);
 }
@@ -596,7 +596,7 @@ static int td_done(struct admhcd *ahcd, struct urb *urb, struct td *td)
 		urb->iso_frame_desc[td->index].status = cc_to_error[cc];
 
 		if (cc != TD_CC_NOERROR)
-			admhc_vdbg (ahcd,
+			admhc_vdbg(ahcd,
 				"urb %p iso td %p (%d) len %d cc %d\n",
 				urb, td, 1 + td->index, dlen, cc);
 
@@ -615,9 +615,8 @@ static int td_done(struct admhcd *ahcd, struct urb *urb, struct td *td)
 
 
 		/* count all non-empty packets except control SETUP packet */
-		if ((type != PIPE_CONTROL || td->index != 0) && tdDBP != 0) {
+		if ((type != PIPE_CONTROL || td->index != 0) && tdDBP != 0)
 			urb->actual_length += tdDBP - td->data_dma + bl;
-		}
 
 		if (cc != TD_CC_NOERROR && cc < TD_CC_HCD0)
 			admhc_vdbg(ahcd,
@@ -691,13 +690,13 @@ ed_halted(struct admhcd *ahcd, struct td *td, int cc, struct td *rev)
 			break;
 		/* fallthrough */
 	default:
-		admhc_dbg (ahcd,
+		admhc_dbg(ahcd,
 			"urb %p path %s ep%d%s %08x cc %d --> status %d\n",
 			urb, urb->dev->devpath,
 			usb_pipeendpoint (urb->pipe),
-			usb_pipein (urb->pipe) ? "in" : "out",
+			usb_pipein(urb->pipe) ? "in" : "out",
 			hc32_to_cpu(ahcd, td->hwINFO),
-			cc, cc_to_error [cc]);
+			cc, cc_to_error[cc]);
 	}
 }
 
@@ -719,11 +718,10 @@ rescan_all:
 		 * frame counter wraps and EDs with partially retired TDs
 		 */
 		if (likely(HC_IS_RUNNING(admhcd_to_hcd(ahcd)->state))) {
-			if (tick_before (tick, ed->tick)) {
+			if (tick_before(tick, ed->tick))
 skip_ed:
 				last = &ed->ed_rm_next;
 				continue;
-			}
 #if 0
 			if (!list_empty(&ed->td_list)) {
 				struct td	*td;
@@ -828,7 +826,7 @@ rescan_this:
 
 static void ed_unhalt(struct admhcd *ahcd, struct ed *ed, struct urb *urb)
 {
-	struct list_head *entry,*tmp;
+	struct list_head *entry, *tmp;
 	__hc32 toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C);
 
 #ifdef ADMHC_VERBOSE_DEBUG
@@ -880,7 +878,7 @@ static inline int is_td_halted(struct admhcd *ahcd, struct ed *ed,
 
 static void ed_update(struct admhcd *ahcd, struct ed *ed)
 {
-	struct list_head *entry,*tmp;
+	struct list_head *entry, *tmp;
 
 #ifdef ADMHC_VERBOSE_DEBUG
 	admhc_dump_ed(ahcd, "UPDATE", ed, 1);
@@ -901,7 +899,7 @@ static void ed_update(struct admhcd *ahcd, struct ed *ed)
 			ed_unhalt(ahcd, ed, urb);
 
 		if (ed->type == PIPE_INTERRUPT)
-			ed_intr_refill(ahcd,ed);
+			ed_intr_refill(ahcd, ed);
 
 		/* If all this urb's TDs are done, call complete() */
 		if (urb_priv->td_idx == urb_priv->td_cnt)
@@ -923,11 +921,11 @@ static void ed_update(struct admhcd *ahcd, struct ed *ed)
 				/* ... hc may need waking-up */
 				switch (ed->type) {
 				case PIPE_CONTROL:
-					admhc_writel (ahcd, OHCI_CLF,
+					admhc_writel(ahcd, OHCI_CLF,
 						&ahcd->regs->cmdstatus);
 					break;
 				case PIPE_BULK:
-					admhc_writel (ahcd, OHCI_BLF,
+					admhc_writel(ahcd, OHCI_BLF,
 						&ahcd->regs->cmdstatus);
 					break;
 				}

target/linux/adm5120/files/drivers/usb/host/adm5120.h

@@ -187,7 +187,7 @@ struct td {
 
 
 /* map OHCI TD status codes (CC) to errno values */
-static const int cc_to_error [16] = {
+static const int cc_to_error[16] = {
 	/* No  Error  */	0,
 	/* CRC Error  */	-EILSEQ,
 	/* Bit Stuff  */	-EPROTO,
@@ -430,7 +430,7 @@ struct admhcd {
 #define	OHCI_QUIRK_BE_DESC	0x08			/* BE descriptors */
 #define	OHCI_QUIRK_BE_MMIO	0x10			/* BE registers */
 #define	OHCI_QUIRK_ZFMICRO	0x20			/* Compaq ZFMicro chipset*/
-	// there are also chip quirks/bugs in init logic
+	/* there are also chip quirks/bugs in init logic */
 
 #ifdef DEBUG
 	struct dentry		*debug_dir;
@@ -458,17 +458,17 @@ static inline struct usb_hcd *admhcd_to_hcd(const struct admhcd *ahcd)
 
 #ifdef DEBUG
 #	define admhc_dbg(ahcd, fmt, args...) \
-		printk(KERN_DEBUG "adm5120-hcd: " fmt , ## args )
+		printk(KERN_DEBUG "adm5120-hcd: " fmt, ## args)
 #else
 #	define admhc_dbg(ahcd, fmt, args...) do { } while (0)
 #endif
 
 #define admhc_err(ahcd, fmt, args...) \
-	printk(KERN_ERR "adm5120-hcd: " fmt , ## args )
+	printk(KERN_ERR "adm5120-hcd: " fmt, ## args)
 #define admhc_info(ahcd, fmt, args...) \
-	printk(KERN_INFO "adm5120-hcd: " fmt , ## args )
+	printk(KERN_INFO "adm5120-hcd: " fmt, ## args)
 #define admhc_warn(ahcd, fmt, args...) \
-	printk(KERN_WARNING "adm5120-hcd: " fmt , ## args )
+	printk(KERN_WARNING "adm5120-hcd: " fmt, ## args)
 
 #ifdef ADMHC_VERBOSE_DEBUG
 #	define admhc_vdbg admhc_dbg
@@ -745,7 +745,7 @@ static inline void admhc_dma_enable(struct admhcd *ahcd)
 
 	t |= ADMHC_HC_DMAE;
 	admhc_writel(ahcd, t, &ahcd->regs->host_control);
-	admhc_vdbg(ahcd,"DMA enabled\n");
+	admhc_vdbg(ahcd, "DMA enabled\n");
 }
 
 static inline void admhc_dma_disable(struct admhcd *ahcd)
@@ -758,5 +758,5 @@ static inline void admhc_dma_disable(struct admhcd *ahcd)
 
 	t &= ~ADMHC_HC_DMAE;
 	admhc_writel(ahcd, t, &ahcd->regs->host_control);
-	admhc_vdbg(ahcd,"DMA disabled\n");
+	admhc_vdbg(ahcd, "DMA disabled\n");
 }

target/linux/adm5120/files/drivers/watchdog/adm5120_wdt.c

@@ -32,8 +32,8 @@
 #define NAME "adm5120_wdt"
 #define VERSION "0.1"
 
-static int expect_close = 0;
+static int expect_close;
-static int access = 0;
+static int access;
 static unsigned int timeout = DEFAULT_TIMEOUT;
 
 static int nowayout = WATCHDOG_NOWAYOUT;
@@ -71,9 +71,8 @@ static int wdt_open(struct inode *inode, struct file *file)
 	if (access)
 		return -EBUSY;
 
-	if (nowayout) {
+	if (nowayout)
 		__module_get(THIS_MODULE);
-	}
 
 	/* Activate timer */
 	wdt_reset_counter();
@@ -86,16 +85,16 @@ static int wdt_open(struct inode *inode, struct file *file)
 static int wdt_release(struct inode *inode, struct file *file)
 {
 	/*
-	 *	Shut off the timer.
+	 * Shut off the timer.
-	 * 	Lock it in if it's a module and we set nowayout
+	 * Lock it in if it's a module and we set nowayout
 	 */
 	if (expect_close && (nowayout == 0)) {
 		wdt_disable();
 		printk(KERN_INFO NAME ": disabling watchdog timer\n");
 		module_put(THIS_MODULE);
-	} else {
+	} else
 		printk(KERN_CRIT NAME ": device closed unexpectedly.  WDT will not stop!\n");
-	}
+
 	access = 0;
 	return 0;
 }
@@ -136,46 +135,46 @@ static int wdt_ioctl(struct inode *inode, struct file *file,
 		.identity =		"ADM5120_WDT Watchdog",
 	};
 	switch (cmd) {
-		default:
+	default:
-			return -ENOTTY;
+		return -ENOTTY;
-		case WDIOC_GETSUPPORT:
+	case WDIOC_GETSUPPORT:
-			if(copy_to_user((struct watchdog_info *)arg, &ident, sizeof(ident)))
+		if (copy_to_user((struct watchdog_info *)arg, &ident, sizeof(ident)))
-				return -EFAULT;
+			return -EFAULT;
-			return 0;
+		return 0;
-		case WDIOC_GETSTATUS:
+	case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
+	case WDIOC_GETBOOTSTATUS:
-			return put_user(0,(int *)arg);
+		return put_user(0, (int *)arg);
-		case WDIOC_KEEPALIVE:
+	case WDIOC_KEEPALIVE:
-			wdt_reset_counter();
+		wdt_reset_counter();
-			return 0;
+		return 0;
-		case WDIOC_SETTIMEOUT:
+	case WDIOC_SETTIMEOUT:
-			if (get_user(new_timeout, (int *)arg))
+		if (get_user(new_timeout, (int *)arg))
-				return -EFAULT;
+			return -EFAULT;
-			if (new_timeout < 1)
+		if (new_timeout < 1)
-				return -EINVAL;
+			return -EINVAL;
-			if (new_timeout > MAX_TIMEOUT)
+		if (new_timeout > MAX_TIMEOUT)
-				return -EINVAL;
+			return -EINVAL;
-			timeout = new_timeout;
+		timeout = new_timeout;
-			wdt_set_timeout();
+		wdt_set_timeout();
-			/* Fall */
+		/* Fall */
-		case WDIOC_GETTIMEOUT:
+	case WDIOC_GETTIMEOUT:
-			return put_user(timeout, (int *)arg);
+		return put_user(timeout, (int *)arg);
 	}
 }
 
-static struct file_operations wdt_fops = {
+static const struct file_operations wdt_fops = {
-	owner:		THIS_MODULE,
+	.owner		= THIS_MODULE,
-	llseek:		no_llseek,
+	.llseek		= no_llseek,
-	write:		wdt_write,
+	.write		= wdt_write,
-	ioctl:		wdt_ioctl,
+	.ioctl		= wdt_ioctl,
-	open:		wdt_open,
+	.open		= wdt_open,
-	release:	wdt_release,
+	.release	= wdt_release,
 };
 
 static struct miscdevice wdt_miscdev = {
-	minor:		WATCHDOG_MINOR,
+	.minor		= WATCHDOG_MINOR,
-	name:		"watchdog",
+	.name		= "watchdog",
-	fops:		&wdt_fops,
+	.fops		= &wdt_fops,
 };
 
 static char banner[] __initdata = KERN_INFO NAME ": Watchdog Timer version " VERSION "\n";

target/linux/adm5120/patches-2.6.32/003-adm5120_switch.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/Kconfig
 +++ b/drivers/net/Kconfig
-@@ -602,6 +602,10 @@ config MIPS_AU1X00_ENET
+@@ -479,6 +479,10 @@ config MIPS_AU1X00_ENET
  	  If you have an Alchemy Semi AU1X00 based system
  	  say Y.  Otherwise, say N.
  
@@ -13,7 +13,7 @@
  	depends on PCI && SGI_IP27
 --- a/drivers/net/Makefile
 +++ b/drivers/net/Makefile
-@@ -208,6 +208,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
+@@ -207,6 +207,7 @@ obj-$(CONFIG_SC92031) += sc92031.o
  # This is also a 82596 and should probably be merged
  obj-$(CONFIG_LP486E) += lp486e.o
  

target/linux/adm5120/patches-2.6.32/901-adm5120-usb-fix-compiler-warning.patch

@@ -4,8 +4,8 @@
  
  #define admhc_dbg_sw(ahcd, next, size, format, arg...) \
  	do { \
--	if (next) { \
+-		if (next) { \
-+	if (next != NULL) { \
++		if (next != NULL) { \
- 		unsigned s_len; \
+ 			unsigned s_len; \
- 		s_len = scnprintf(*next, *size, format, ## arg ); \
+ 			s_len = scnprintf(*next, *size, format, ## arg); \
- 		*size -= s_len; *next += s_len; \
+ 			*size -= s_len; *next += s_len; \

target/linux/adm5120/patches-2.6.32/902-adm5120-usb-remove-dev-power-power_state.patch

@@ -1,6 +1,6 @@
 --- a/drivers/usb/host/adm5120-dbg.c
 +++ b/drivers/usb/host/adm5120-dbg.c
-@@ -642,7 +642,7 @@ static ssize_t fill_registers_buffer(str
+@@ -644,7 +644,7 @@ static ssize_t fill_registers_buffer(str
  		hcd->product_desc,
  		hcd_name);
  

target/linux/adm5120/patches-2.6.32/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch

@@ -35,7 +35,7 @@
  	struct admhcd		*ahcd;
  	struct ed		**seen, *ed;
  	unsigned long		flags;
-@@ -529,9 +523,7 @@ static ssize_t fill_periodic_buffer(stru
+@@ -530,9 +524,7 @@ static ssize_t fill_periodic_buffer(stru
  		return 0;
  	seen_count = 0;
  
@@ -46,7 +46,7 @@
  	next = buf->page;
  	size = PAGE_SIZE;
  
-@@ -613,7 +605,6 @@ static ssize_t fill_periodic_buffer(stru
+@@ -615,7 +607,6 @@ static ssize_t fill_periodic_buffer(stru
  
  static ssize_t fill_registers_buffer(struct debug_buffer *buf)
  {
@@ -54,7 +54,7 @@
  	struct usb_hcd		*hcd;
  	struct admhcd		*ahcd;
  	struct admhcd_regs __iomem *regs;
-@@ -622,9 +613,8 @@ static ssize_t fill_registers_buffer(str
+@@ -624,9 +615,8 @@ static ssize_t fill_registers_buffer(str
  	char			*next;
  	u32			rdata;
  
@@ -66,7 +66,7 @@
  	regs = ahcd->regs;
  	next = buf->page;
  	size = PAGE_SIZE;
-@@ -689,7 +679,7 @@ done:
+@@ -691,7 +681,7 @@ done:
  }
  
  
@@ -75,7 +75,7 @@
  				ssize_t (*fill_func)(struct debug_buffer *))
  {
  	struct debug_buffer *buf;
-@@ -697,7 +687,7 @@ static struct debug_buffer *alloc_buffer
+@@ -699,7 +689,7 @@ static struct debug_buffer *alloc_buffer
  	buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL);
  
  	if (buf) {
@@ -84,7 +84,7 @@
  		buf->fill_func = fill_func;
  		mutex_init(&buf->mutex);
  	}
-@@ -790,26 +780,25 @@ static int debug_registers_open(struct i
+@@ -792,26 +782,25 @@ static int debug_registers_open(struct i
  static inline void create_debug_files(struct admhcd *ahcd)
  {
  	struct usb_bus *bus = &admhcd_to_hcd(ahcd)->self;

target/linux/adm5120/patches-2.6.38/901-adm5120-usb-fix-compiler-warning.patch

@@ -4,8 +4,8 @@
  
  #define admhc_dbg_sw(ahcd, next, size, format, arg...) \
  	do { \
--	if (next) { \
+-		if (next) { \
-+	if (next != NULL) { \
++		if (next != NULL) { \
- 		unsigned s_len; \
+ 			unsigned s_len; \
- 		s_len = scnprintf(*next, *size, format, ## arg ); \
+ 			s_len = scnprintf(*next, *size, format, ## arg); \
- 		*size -= s_len; *next += s_len; \
+ 			*size -= s_len; *next += s_len; \

target/linux/adm5120/patches-2.6.38/902-adm5120-usb-remove-dev-power-power_state.patch

@@ -1,6 +1,6 @@
 --- a/drivers/usb/host/adm5120-dbg.c
 +++ b/drivers/usb/host/adm5120-dbg.c
-@@ -642,7 +642,7 @@ static ssize_t fill_registers_buffer(str
+@@ -644,7 +644,7 @@ static ssize_t fill_registers_buffer(str
  		hcd->product_desc,
  		hcd_name);
  

target/linux/adm5120/patches-2.6.38/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch

@@ -35,7 +35,7 @@
  	struct admhcd		*ahcd;
  	struct ed		**seen, *ed;
  	unsigned long		flags;
-@@ -529,9 +523,7 @@ static ssize_t fill_periodic_buffer(stru
+@@ -530,9 +524,7 @@ static ssize_t fill_periodic_buffer(stru
  		return 0;
  	seen_count = 0;
  
@@ -46,7 +46,7 @@
  	next = buf->page;
  	size = PAGE_SIZE;
  
-@@ -613,7 +605,6 @@ static ssize_t fill_periodic_buffer(stru
+@@ -615,7 +607,6 @@ static ssize_t fill_periodic_buffer(stru
  
  static ssize_t fill_registers_buffer(struct debug_buffer *buf)
  {
@@ -54,7 +54,7 @@
  	struct usb_hcd		*hcd;
  	struct admhcd		*ahcd;
  	struct admhcd_regs __iomem *regs;
-@@ -622,9 +613,8 @@ static ssize_t fill_registers_buffer(str
+@@ -624,9 +615,8 @@ static ssize_t fill_registers_buffer(str
  	char			*next;
  	u32			rdata;
  
@@ -66,7 +66,7 @@
  	regs = ahcd->regs;
  	next = buf->page;
  	size = PAGE_SIZE;
-@@ -689,7 +679,7 @@ done:
+@@ -691,7 +681,7 @@ done:
  }
  
  
@@ -75,7 +75,7 @@
  				ssize_t (*fill_func)(struct debug_buffer *))
  {
  	struct debug_buffer *buf;
-@@ -697,7 +687,7 @@ static struct debug_buffer *alloc_buffer
+@@ -699,7 +689,7 @@ static struct debug_buffer *alloc_buffer
  	buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL);
  
  	if (buf) {
@@ -84,7 +84,7 @@
  		buf->fill_func = fill_func;
  		mutex_init(&buf->mutex);
  	}
-@@ -790,26 +780,25 @@ static int debug_registers_open(struct i
+@@ -792,26 +782,25 @@ static int debug_registers_open(struct i
  static inline void create_debug_files(struct admhcd *ahcd)
  {
  	struct usb_bus *bus = &admhcd_to_hcd(ahcd)->self;

target/linux/adm5120/patches-2.6.38/930-2_6_36_ports.patch

@@ -22,14 +22,14 @@
  #define NO_IRQ		(-1)
 --- a/drivers/watchdog/adm5120_wdt.c
 +++ b/drivers/watchdog/adm5120_wdt.c
-@@ -167,7 +167,7 @@ static struct file_operations wdt_fops =
+@@ -166,7 +166,7 @@ static const struct file_operations wdt_
- 	owner:		THIS_MODULE,
+ 	.owner		= THIS_MODULE,
- 	llseek:		no_llseek,
+ 	.llseek		= no_llseek,
- 	write:		wdt_write,
+ 	.write		= wdt_write,
--	ioctl:		wdt_ioctl,
+-	.ioctl		= wdt_ioctl,
-+	unlocked_ioctl:	wdt_ioctl,
++	.unlocked_ioctl	= wdt_ioctl,
- 	open:		wdt_open,
+ 	.open		= wdt_open,
- 	release:	wdt_release,
+ 	.release	= wdt_release,
  };
 --- a/arch/mips/Kbuild.platforms
 +++ b/arch/mips/Kbuild.platforms