diff --git a/target/linux/mediatek/Makefile b/target/linux/mediatek/Makefile index 288fb537a7b..f667081253d 100644 --- a/target/linux/mediatek/Makefile +++ b/target/linux/mediatek/Makefile @@ -8,8 +8,7 @@ BOARDNAME:=MediaTek Ralink ARM SUBTARGETS:=mt7622 mt7623 mt7629 filogic FEATURES:=dt-overlay emmc fpu gpio nand pci pcie rootfs-part separate_ramdisk squashfs usb -KERNEL_PATCHVER:=6.1 -KERNEL_TESTING_PATCHVER:=6.6 +KERNEL_PATCHVER:=6.6 include $(INCLUDE_DIR)/target.mk DEFAULT_PACKAGES += \ diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7981-rfb-mxl-2p5g-phy-eth1.dtso b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7981-rfb-mxl-2p5g-phy-eth1.dtso deleted file mode 100644 index 4d0e5c04067..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7981-rfb-mxl-2p5g-phy-eth1.dtso +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */ -/dts-v1/; -/plugin/; - -#include - -/ { - compatible = "mediatek,mt7981-rfb", "mediatek,mt7981"; - - fragment@0 { - target = <&gmac1>; - __overlay__ { - phy-mode = "2500base-x"; - phy-handle = <&phy5>; - }; - }; - - fragment@1 { - target = <&mdio_bus>; - __overlay__ { - reset-gpios = <&pio 14 GPIO_ACTIVE_LOW>; - reset-delay-us = <600>; - reset-post-delay-us = <20000>; - - phy5: ethernet-phy@5 { - reg = <5>; - compatible = "ethernet-phy-ieee802.3-c45"; - phy-mode = "2500base-x"; - }; - }; - }; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7981-rfb-mxl-2p5g-phy-swp5.dtso b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7981-rfb-mxl-2p5g-phy-swp5.dtso deleted file mode 100644 index 710e6c0bcfb..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7981-rfb-mxl-2p5g-phy-swp5.dtso +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */ -/dts-v1/; -/plugin/; - -#include - -/ { - compatible = "mediatek,mt7981-rfb", "mediatek,mt7981"; - - fragment@0 { - target = <&sw_p5>; - __overlay__ { - phy-mode = "2500base-x"; - phy-handle = <&phy5>; - status = "okay"; - }; - }; - - fragment@1 { - target = <&mdio_bus>; - __overlay__ { - reset-gpios = <&pio 14 GPIO_ACTIVE_LOW>; - reset-delay-us = <600>; - reset-post-delay-us = <20000>; - - phy5: ethernet-phy@5 { - reg = <5>; - compatible = "ethernet-phy-ieee802.3-c45"; - phy-mode = "2500base-x"; - }; - }; - }; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7981-rfb-spim-nand.dtso b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7981-rfb-spim-nand.dtso deleted file mode 100644 index 5b51dfd671c..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7981-rfb-spim-nand.dtso +++ /dev/null @@ -1,66 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */ -/dts-v1/; -/plugin/; - -/ { - compatible = "mediatek,mt7981-rfb", "mediatek,mt7981"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - spi_nand: spi_nand@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <10000000>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "BL2"; - reg = <0x00000 0x0100000>; - read-only; - }; - - partition@100000 { - label = "u-boot-env"; - reg = <0x0100000 0x0080000>; - }; - - factory: partition@180000 { - label = "Factory"; - reg = <0x180000 0x0200000>; - }; - - partition@380000 { - label = "FIP"; - reg = <0x380000 0x0200000>; - }; - - partition@580000 { - label = "ubi"; - reg = <0x580000 0x4000000>; - }; - }; - }; - }; - }; - - fragment@1 { - target = <&wifi>; - __overlay__ { - mediatek,mtd-eeprom = <&factory 0x0>; - status = "okay"; - }; - }; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7981-rfb.dts b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7981-rfb.dts deleted file mode 100644 index b2bb6929562..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7981-rfb.dts +++ /dev/null @@ -1,188 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2022 MediaTek Inc. - * Author: Sam.Shih - */ - -/dts-v1/; -#include "mt7981.dtsi" - -/ { - model = "MediaTek MT7981 RFB"; - compatible = "mediatek,mt7981-rfb", "mediatek,mt7981"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory { - reg = <0 0x40000000 0 0x20000000>; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_5v: regulator-5v { - compatible = "regulator-fixed"; - regulator-name = "fixed-5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - regulator-always-on; - }; - - gpio-keys { - compatible = "gpio-keys"; - reset { - label = "reset"; - linux,code = ; - gpios = <&pio 1 GPIO_ACTIVE_LOW>; - }; - wps { - label = "wps"; - linux,code = ; - gpios = <&pio 0 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -ð { - status = "okay"; - - gmac0: mac@0 { - compatible = "mediatek,eth-mac"; - reg = <0>; - phy-mode = "2500base-x"; - - fixed-link { - speed = <2500>; - full-duplex; - pause; - }; - }; - - gmac1: mac@1 { - compatible = "mediatek,eth-mac"; - reg = <1>; - phy-mode = "gmii"; - phy-handle = <&int_gbe_phy>; - }; -}; - -&mdio_bus { - switch: switch@1f { - compatible = "mediatek,mt7531"; - reg = <31>; - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&pio>; - interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; - reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>; - }; -}; - -&crypto { - status = "okay"; -}; - -&pio { - spi0_flash_pins: spi0-pins { - mux { - function = "spi"; - groups = "spi0", "spi0_wp_hold"; - }; - conf-pu { - pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; - drive-strength = ; - bias-pull-up = ; - }; - conf-pd { - pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; - drive-strength = ; - bias-pull-down = ; - }; - }; - -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_flash_pins>; - cs-gpios = <0>, <0>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; -}; - -&switch { - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan1"; - }; - - port@1 { - reg = <1>; - label = "lan2"; - }; - - port@2 { - reg = <2>; - label = "lan3"; - }; - - port@3 { - reg = <3>; - label = "lan4"; - }; - - sw_p5: port@5 { - reg = <5>; - label = "lan5"; - status = "disabled"; - }; - - port@6 { - reg = <6>; - ethernet = <&gmac0>; - phy-mode = "2500base-x"; - - fixed-link { - speed = <2500>; - full-duplex; - pause; - }; - }; - }; -}; - -&xhci { - vusb33-supply = <®_3p3v>; - vbus-supply = <®_5v>; - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&usb_phy { - status = "okay"; -}; - -&watchdog { - status = "okay"; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7981.dtsi b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7981.dtsi deleted file mode 100644 index 54cfd0b4b9f..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7981.dtsi +++ /dev/null @@ -1,822 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (c) 2020 MediaTek Inc. - * Author: Sam.Shih - * Author: Jianhui Zhao - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/ { - compatible = "mediatek,mt7981"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a53"; - reg = <0x0>; - device_type = "cpu"; - enable-method = "psci"; - }; - - cpu@1 { - compatible = "arm,cortex-a53"; - reg = <0x1>; - device_type = "cpu"; - enable-method = "psci"; - }; - }; - - ice: ice_debug { - compatible = "mediatek,mt7981-ice_debug", "mediatek,mt2701-ice_debug"; - clocks = <&infracfg CLK_INFRA_DBG_CK>; - clock-names = "ice_dbg"; - }; - - clk40m: oscillator-40m { - compatible = "fixed-clock"; - clock-frequency = <40000000>; - clock-output-names = "clkxtal"; - #clock-cells = <0>; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - fan: pwm-fan { - compatible = "pwm-fan"; - /* cooling level (0, 1, 2, 3, 4, 5, 6, 7) : (0%/25%/37.5%/50%/62.5%/75%/87.5%/100% duty) */ - cooling-levels = <0 63 95 127 159 191 223 255>; - #cooling-cells = <2>; - status = "disabled"; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - reserved-memory { - ranges; - #address-cells = <2>; - #size-cells = <2>; - - /* 64 KiB reserved for ramoops/pstore */ - ramoops@42ff0000 { - compatible = "ramoops"; - reg = <0 0x42ff0000 0 0x10000>; - record-size = <0x1000>; - }; - - /* 192 KiB reserved for ARM Trusted Firmware (BL31) */ - secmon_reserved: secmon@43000000 { - reg = <0 0x43000000 0 0x30000>; - no-map; - }; - - wmcpu_emi: wmcpu-reserved@47c80000 { - reg = <0 0x47c80000 0 0x100000>; - no-map; - }; - - wo_emi0: wo-emi@47d80000 { - reg = <0 0x47d80000 0 0x40000>; - no-map; - }; - - wo_data: wo-data@47dc0000 { - reg = <0 0x47dc0000 0 0x240000>; - no-map; - }; - }; - - soc { - compatible = "simple-bus"; - ranges; - #address-cells = <2>; - #size-cells = <2>; - - gic: interrupt-controller@c000000 { - compatible = "arm,gic-v3"; - reg = <0 0x0c000000 0 0x40000>, /* GICD */ - <0 0x0c080000 0 0x200000>; /* GICR */ - interrupt-parent = <&gic>; - interrupts = ; - interrupt-controller; - #interrupt-cells = <3>; - }; - - consys: consys@10000000 { - compatible = "mediatek,mt7981-consys"; - reg = <0 0x10000000 0 0x8600000>; - memory-region = <&wmcpu_emi>; - }; - - infracfg: clock-controller@10001000 { - compatible = "mediatek,mt7981-infracfg", "syscon"; - reg = <0 0x10001000 0 0x1000>; - #clock-cells = <1>; - }; - - wed_pcie: wed_pcie@10003000 { - compatible = "mediatek,wed_pcie"; - reg = <0 0x10003000 0 0x10>; - }; - - topckgen: clock-controller@1001b000 { - compatible = "mediatek,mt7981-topckgen", "syscon"; - reg = <0 0x1001b000 0 0x1000>; - #clock-cells = <1>; - }; - - watchdog: watchdog@1001c000 { - compatible = "mediatek,mt7986-wdt", - "mediatek,mt6589-wdt"; - reg = <0 0x1001c000 0 0x1000>; - interrupts = ; - #reset-cells = <1>; - status = "disabled"; - }; - - apmixedsys: clock-controller@1001e000 { - compatible = "mediatek,mt7981-apmixedsys", "syscon"; - reg = <0 0x1001e000 0 0x1000>; - #clock-cells = <1>; - }; - - pwm: pwm@10048000 { - compatible = "mediatek,mt7981-pwm"; - reg = <0 0x10048000 0 0x1000>; - clocks = <&infracfg CLK_INFRA_PWM_STA>, - <&infracfg CLK_INFRA_PWM_HCK>, - <&infracfg CLK_INFRA_PWM1_CK>, - <&infracfg CLK_INFRA_PWM2_CK>, - <&infracfg CLK_INFRA_PWM3_CK>; - clock-names = "top", "main", "pwm1", "pwm2", "pwm3"; - #pwm-cells = <2>; - }; - - sgmiisys0: syscon@10060000 { - compatible = "mediatek,mt7981-sgmiisys_0", "syscon"; - reg = <0 0x10060000 0 0x1000>; - mediatek,pnswap; - #clock-cells = <1>; - }; - - sgmiisys1: syscon@10070000 { - compatible = "mediatek,mt7981-sgmiisys_1", "syscon"; - reg = <0 0x10070000 0 0x1000>; - #clock-cells = <1>; - }; - - crypto: crypto@10320000 { - compatible = "inside-secure,safexcel-eip97"; - reg = <0 0x10320000 0 0x40000>; - interrupts = , - , - , - ; - interrupt-names = "ring0", "ring1", "ring2", "ring3"; - clocks = <&topckgen CLK_TOP_EIP97B>; - clock-names = "top_eip97_ck"; - assigned-clocks = <&topckgen CLK_TOP_EIP97B_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_CB_NET1_D5>; - }; - - uart0: serial@11002000 { - compatible = "mediatek,mt6577-uart"; - reg = <0 0x11002000 0 0x400>; - interrupts = ; - clocks = <&infracfg CLK_INFRA_UART0_SEL>, - <&infracfg CLK_INFRA_UART0_CK>; - clock-names = "baud", "bus"; - assigned-clocks = <&topckgen CLK_TOP_UART_SEL>, - <&infracfg CLK_INFRA_UART0_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_CB_CKSQ_40M>, - <&topckgen CLK_TOP_UART_SEL>; - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; - status = "disabled"; - }; - - uart1: serial@11003000 { - compatible = "mediatek,mt6577-uart"; - reg = <0 0x11003000 0 0x400>; - interrupts = ; - clocks = <&infracfg CLK_INFRA_UART1_SEL>, - <&infracfg CLK_INFRA_UART1_CK>; - clock-names = "baud", "bus"; - assigned-clocks = <&topckgen CLK_TOP_UART_SEL>, - <&infracfg CLK_INFRA_UART1_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_CB_CKSQ_40M>, - <&topckgen CLK_TOP_UART_SEL>; - status = "disabled"; - }; - - uart2: serial@11004000 { - compatible = "mediatek,mt6577-uart"; - reg = <0 0x11004000 0 0x400>; - interrupts = ; - clocks = <&infracfg CLK_INFRA_UART2_SEL>, - <&infracfg CLK_INFRA_UART2_CK>; - clock-names = "baud", "bus"; - assigned-clocks = <&topckgen CLK_TOP_UART_SEL>, - <&infracfg CLK_INFRA_UART2_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_CB_CKSQ_40M>, - <&topckgen CLK_TOP_UART_SEL>; - status = "disabled"; - }; - - snand: snfi@11005000 { - compatible = "mediatek,mt7986-snand"; - reg = <0 0x11005000 0 0x1000>, <0 0x11006000 0 0x1000>; - reg-names = "nfi", "ecc"; - interrupts = ; - clocks = <&infracfg CLK_INFRA_SPINFI1_CK>, - <&infracfg CLK_INFRA_NFI1_CK>, - <&infracfg CLK_INFRA_NFI_HCK_CK>; - clock-names = "pad_clk", "nfi_clk", "nfi_hclk"; - assigned-clocks = <&topckgen CLK_TOP_SPINFI_SEL>, - <&topckgen CLK_TOP_NFI1X_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_CB_M_D8>, - <&topckgen CLK_TOP_CB_M_D8>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c0: i2c@11007000 { - compatible = "mediatek,mt7981-i2c"; - reg = <0 0x11007000 0 0x1000>, - <0 0x10217080 0 0x80>; - interrupts = ; - clock-div = <1>; - clocks = <&infracfg CLK_INFRA_I2C0_CK>, - <&infracfg CLK_INFRA_AP_DMA_CK>, - <&infracfg CLK_INFRA_I2C_MCK_CK>, - <&infracfg CLK_INFRA_I2C_PCK_CK>; - clock-names = "main", "dma", "arb", "pmic"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi2: spi@11009000 { - compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm"; - reg = <0 0x11009000 0 0x100>; - interrupts = ; - clocks = <&topckgen CLK_TOP_CB_M_D2>, - <&topckgen CLK_TOP_SPI_SEL>, - <&infracfg CLK_INFRA_SPI2_CK>, - <&infracfg CLK_INFRA_SPI2_HCK_CK>; - clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi0: spi@1100a000 { - compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm"; - reg = <0 0x1100a000 0 0x100>; - interrupts = ; - clocks = <&topckgen CLK_TOP_CB_M_D2>, - <&topckgen CLK_TOP_SPI_SEL>, - <&infracfg CLK_INFRA_SPI0_CK>, - <&infracfg CLK_INFRA_SPI0_HCK_CK>; - clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi1: spi@1100b000 { - compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm"; - reg = <0 0x1100b000 0 0x100>; - interrupts = ; - clocks = <&topckgen CLK_TOP_CB_M_D2>, - <&topckgen CLK_TOP_SPIM_MST_SEL>, - <&infracfg CLK_INFRA_SPI1_CK>, - <&infracfg CLK_INFRA_SPI1_HCK_CK>; - clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - thermal: thermal@1100c800 { - compatible = "mediatek,mt7981-thermal", "mediatek,mt7986-thermal"; - reg = <0 0x1100c800 0 0x800>; - interrupts = ; - clocks = <&infracfg CLK_INFRA_THERM_CK>, - <&infracfg CLK_INFRA_ADC_26M_CK>; - clock-names = "therm", "auxadc"; - nvmem-cells = <&thermal_calibration>; - nvmem-cell-names = "calibration-data"; - #thermal-sensor-cells = <1>; - mediatek,auxadc = <&auxadc>; - mediatek,apmixedsys = <&apmixedsys>; - }; - - auxadc: adc@1100d000 { - compatible = "mediatek,mt7981-auxadc", - "mediatek,mt7986-auxadc", - "mediatek,mt7622-auxadc"; - reg = <0 0x1100d000 0 0x1000>; - clocks = <&infracfg CLK_INFRA_ADC_26M_CK>, - <&infracfg CLK_INFRA_ADC_FRC_CK>; - clock-names = "main", "32k"; - #io-channel-cells = <1>; - }; - - xhci: usb@11200000 { - compatible = "mediatek,mt7986-xhci", - "mediatek,mtk-xhci"; - reg = <0 0x11200000 0 0x2e00>, - <0 0x11203e00 0 0x0100>; - reg-names = "mac", "ippc"; - interrupts = ; - clocks = <&infracfg CLK_INFRA_IUSB_SYS_CK>, - <&infracfg CLK_INFRA_IUSB_CK>, - <&infracfg CLK_INFRA_IUSB_133_CK>, - <&infracfg CLK_INFRA_IUSB_66M_CK>, - <&topckgen CLK_TOP_U2U3_XHCI_SEL>; - clock-names = "sys_ck", - "ref_ck", - "mcu_ck", - "dma_ck", - "xhci_ck"; - phys = <&u2port0 PHY_TYPE_USB2>, - <&u3port0 PHY_TYPE_USB3>; - vusb33-supply = <®_3p3v>; - status = "disabled"; - }; - - afe: audio-controller@11210000 { - compatible = "mediatek,mt79xx-audio"; - reg = <0 0x11210000 0 0x9000>; - interrupts = ; - clocks = <&infracfg CLK_INFRA_AUD_BUS_CK>, - <&infracfg CLK_INFRA_AUD_26M_CK>, - <&infracfg CLK_INFRA_AUD_L_CK>, - <&infracfg CLK_INFRA_AUD_AUD_CK>, - <&infracfg CLK_INFRA_AUD_EG2_CK>, - <&topckgen CLK_TOP_AUD_SEL>; - clock-names = "aud_bus_ck", - "aud_26m_ck", - "aud_l_ck", - "aud_aud_ck", - "aud_eg2_ck", - "aud_sel"; - assigned-clocks = <&topckgen CLK_TOP_AUD_SEL>, - <&topckgen CLK_TOP_A1SYS_SEL>, - <&topckgen CLK_TOP_AUD_L_SEL>, - <&topckgen CLK_TOP_A_TUNER_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_CB_APLL2_196M>, - <&topckgen CLK_TOP_APLL2_D4>, - <&topckgen CLK_TOP_CB_APLL2_196M>, - <&topckgen CLK_TOP_APLL2_D4>; - status = "disabled"; - }; - - mmc0: mmc@11230000 { - compatible = "mediatek,mt7986-mmc", "mediatek,mt7981-mmc"; - reg = <0 0x11230000 0 0x1000>, <0 0x11c20000 0 0x1000>; - interrupts = ; - clocks = <&infracfg CLK_INFRA_MSDC_CK>, - <&infracfg CLK_INFRA_MSDC_HCK_CK>, - <&infracfg CLK_INFRA_MSDC_66M_CK>, - <&infracfg CLK_INFRA_MSDC_133M_CK>; - assigned-clocks = <&topckgen CLK_TOP_EMMC_208M_SEL>, - <&topckgen CLK_TOP_EMMC_400M_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_CB_M_D2>, - <&topckgen CLK_TOP_CB_NET2_D2>; - clock-names = "source", "hclk", "axi_cg", "ahb_cg"; - status = "disabled"; - }; - - pcie: pcie@11280000 { - compatible = "mediatek,mt7981-pcie", - "mediatek,mt7986-pcie"; - reg = <0 0x11280000 0 0x4000>; - reg-names = "pcie-mac"; - ranges = <0x82000000 0 0x20000000 - 0x0 0x20000000 0 0x10000000>; - device_type = "pci"; - interrupts = ; - bus-range = <0x00 0xff>; - clocks = <&infracfg CLK_INFRA_IPCIE_CK>, - <&infracfg CLK_INFRA_IPCIE_PIPE_CK>, - <&infracfg CLK_INFRA_IPCIER_CK>, - <&infracfg CLK_INFRA_IPCIEB_CK>; - phys = <&u3port0 PHY_TYPE_PCIE>; - phy-names = "pcie-phy"; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc 0>, - <0 0 0 2 &pcie_intc 1>, - <0 0 0 3 &pcie_intc 2>, - <0 0 0 4 &pcie_intc 3>; - #interrupt-cells = <1>; - #address-cells = <3>; - #size-cells = <2>; - status = "disabled"; - - pcie_intc: interrupt-controller { - interrupt-controller; - #interrupt-cells = <1>; - #address-cells = <0>; - }; - }; - - pio: pinctrl@11d00000 { - compatible = "mediatek,mt7981-pinctrl"; - reg = <0 0x11d00000 0 0x1000>, - <0 0x11c00000 0 0x1000>, - <0 0x11c10000 0 0x1000>, - <0 0x11d20000 0 0x1000>, - <0 0x11e00000 0 0x1000>, - <0 0x11e20000 0 0x1000>, - <0 0x11f00000 0 0x1000>, - <0 0x11f10000 0 0x1000>, - <0 0x1000b000 0 0x1000>; - reg-names = "gpio", "iocfg_rt", "iocfg_rm", - "iocfg_rb", "iocfg_lb", "iocfg_bl", - "iocfg_tm", "iocfg_tl", "eint"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pio 0 0 56>; - interrupt-controller; - interrupts = ; - interrupt-parent = <&gic>; - #interrupt-cells = <2>; - - mdio_pins: mdc-mdio-pins { - mux { - function = "eth"; - groups = "smi_mdc_mdio"; - }; - }; - - uart0_pins: uart0-pins { - mux { - function = "uart"; - groups = "uart0"; - }; - }; - - wifi_dbdc_pins: wifi-dbdc-pins { - mux { - function = "eth"; - groups = "wf0_mode1"; - }; - - conf { - pins = "WF_HB1", "WF_HB2", "WF_HB3", "WF_HB4", - "WF_HB0", "WF_HB0_B", "WF_HB5", "WF_HB6", - "WF_HB7", "WF_HB8", "WF_HB9", "WF_HB10", - "WF_TOP_CLK", "WF_TOP_DATA", "WF_XO_REQ", - "WF_CBA_RESETB", "WF_DIG_RESETB"; - drive-strength = <4>; - }; - }; - - gbe_led0_pins: gbe-led0-pins { - mux { - function = "led"; - groups = "gbe_led0"; - }; - }; - - gbe_led1_pins: gbe-led1-pins { - mux { - function = "led"; - groups = "gbe_led1"; - }; - }; - }; - - topmisc: topmisc@11d10000 { - compatible = "mediatek,mt7981-topmisc", "syscon"; - reg = <0 0x11d10000 0 0x10000>; - #clock-cells = <1>; - }; - - usb_phy: usb-phy@11e10000 { - compatible = "mediatek,mt7981", - "mediatek,generic-tphy-v2"; - ranges = <0 0 0x11e10000 0x1700>; - #address-cells = <1>; - #size-cells = <1>; - status = "disabled"; - - u2port0: usb-phy@0 { - reg = <0x0 0x700>; - clocks = <&topckgen CLK_TOP_USB_FRMCNT_SEL>; - clock-names = "ref"; - #phy-cells = <1>; - }; - - u3port0: usb-phy@700 { - reg = <0x700 0x900>; - clocks = <&topckgen CLK_TOP_USB3_PHY_SEL>; - clock-names = "ref"; - #phy-cells = <1>; - mediatek,syscon-type = <&topmisc 0x218 0>; - status = "okay"; - }; - }; - - efuse: efuse@11f20000 { - compatible = "mediatek,mt7981-efuse", - "mediatek,efuse"; - reg = <0 0x11f20000 0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - status = "okay"; - - thermal_calibration: thermal-calib@274 { - reg = <0x274 0xc>; - }; - - phy_calibration: phy-calib@8dc { - reg = <0x8dc 0x10>; - }; - - comb_rx_imp_p0: usb3-rx-imp@8c8 { - reg = <0x8c8 1>; - bits = <0 5>; - }; - - comb_tx_imp_p0: usb3-tx-imp@8c8 { - reg = <0x8c8 2>; - bits = <5 5>; - }; - - comb_intr_p0: usb3-intr@8c9 { - reg = <0x8c9 1>; - bits = <2 6>; - }; - }; - - ethsys: clock-controller@15000000 { - compatible = "mediatek,mt7981-ethsys", - "syscon"; - reg = <0 0x15000000 0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - #address-cells = <1>; - #size-cells = <1>; - }; - - wed: wed@15010000 { - compatible = "mediatek,mt7981-wed", - "mediatek,mt7986-wed", - "syscon"; - reg = <0 0x15010000 0 0x1000>; - interrupt-parent = <&gic>; - interrupts = ; - memory-region = <&wo_emi0>, <&wo_data>; - memory-region-names = "wo-emi", "wo-data"; - mediatek,wo-ccif = <&wo_ccif0>; - mediatek,wo-ilm = <&wo_ilm0>; - mediatek,wo-dlm = <&wo_dlm0>; - mediatek,wo-cpuboot = <&wo_cpuboot>; - }; - - eth: ethernet@15100000 { - compatible = "mediatek,mt7981-eth"; - reg = <0 0x15100000 0 0x80000>; - interrupts = , - , - , - ; - clocks = <ðsys CLK_ETH_FE_EN>, - <ðsys CLK_ETH_GP2_EN>, - <ðsys CLK_ETH_GP1_EN>, - <ðsys CLK_ETH_WOCPU0_EN>, - <&sgmiisys0 CLK_SGM0_TX_EN>, - <&sgmiisys0 CLK_SGM0_RX_EN>, - <&sgmiisys0 CLK_SGM0_CK0_EN>, - <&sgmiisys0 CLK_SGM0_CDR_CK0_EN>, - <&sgmiisys1 CLK_SGM1_TX_EN>, - <&sgmiisys1 CLK_SGM1_RX_EN>, - <&sgmiisys1 CLK_SGM1_CK1_EN>, - <&sgmiisys1 CLK_SGM1_CDR_CK1_EN>, - <&topckgen CLK_TOP_SGM_REG>, - <&topckgen CLK_TOP_NETSYS_SEL>, - <&topckgen CLK_TOP_NETSYS_500M_SEL>; - clock-names = "fe", "gp2", "gp1", "wocpu0", - "sgmii_tx250m", "sgmii_rx250m", - "sgmii_cdr_ref", "sgmii_cdr_fb", - "sgmii2_tx250m", "sgmii2_rx250m", - "sgmii2_cdr_ref", "sgmii2_cdr_fb", - "sgmii_ck", "netsys0", "netsys1"; - assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>, - <&topckgen CLK_TOP_SGM_325M_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_CB_NET2_800M>, - <&topckgen CLK_TOP_CB_SGM_325M>; - mediatek,ethsys = <ðsys>; - mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>; - mediatek,infracfg = <&topmisc>; - mediatek,wed = <&wed>; - #reset-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - mdio_bus: mdio-bus { - #address-cells = <1>; - #size-cells = <0>; - - int_gbe_phy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - phy-mode = "gmii"; - phy-is-integrated; - nvmem-cells = <&phy_calibration>; - nvmem-cell-names = "phy-cal-data"; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - int_gbe_phy_led0: int-gbe-phy-led0@0 { - reg = <0>; - function = LED_FUNCTION_LAN; - status = "disabled"; - }; - - int_gbe_phy_led1: int-gbe-phy-led1@1 { - reg = <1>; - function = LED_FUNCTION_LAN; - status = "disabled"; - }; - }; - }; - }; - }; - - wdma: wdma@15104800 { - compatible = "mediatek,wed-wdma"; - reg = <0 0x15104800 0 0x400>, - <0 0x15104c00 0 0x400>; - }; - - wo_cpuboot: syscon@15194000 { - compatible = "mediatek,mt7986-wo-cpuboot", "syscon"; - reg = <0 0x15194000 0 0x1000>; - }; - - ap2woccif: ap2woccif@151a5000 { - compatible = "mediatek,ap2woccif"; - reg = <0 0x151a5000 0 0x1000>, - <0 0x151ad000 0 0x1000>; - interrupt-parent = <&gic>; - interrupts = , - ; - }; - - wo_ccif0: syscon@151a5000 { - compatible = "mediatek,mt7986-wo-ccif", "syscon"; - reg = <0 0x151a5000 0 0x1000>; - interrupt-parent = <&gic>; - interrupts = ; - }; - - wo_ilm0: syscon@151e0000 { - compatible = "mediatek,mt7986-wo-ilm", "syscon"; - reg = <0 0x151e0000 0 0x8000>; - }; - - wo_dlm0: syscon@151e8000 { - compatible = "mediatek,mt7986-wo-dlm", "syscon"; - reg = <0 0x151e8000 0 0x2000>; - }; - - wifi: wifi@18000000 { - compatible = "mediatek,mt7981-wmac"; - reg = <0 0x18000000 0 0x1000000>, - <0 0x10003000 0 0x1000>, - <0 0x11d10000 0 0x1000>; - resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>; - reset-names = "consys"; - pinctrl-0 = <&wifi_dbdc_pins>; - pinctrl-names = "dbdc"; - clocks = <&topckgen CLK_TOP_NETSYS_MCU_SEL>, - <&topckgen CLK_TOP_AP2CNN_HOST_SEL>; - clock-names = "mcu", "ap2conn"; - interrupts = , - , - , - ; - memory-region = <&wmcpu_emi>; - status = "disabled"; - }; - }; - - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <1000>; - thermal-sensors = <&thermal 0>; - - trips { - cpu_trip_active_highest: active-highest { - temperature = <70000>; - hysteresis = <2000>; - type = "active"; - }; - - cpu_trip_active_high: active-high { - temperature = <60000>; - hysteresis = <2000>; - type = "active"; - }; - - cpu_trip_active_med: active-med { - temperature = <50000>; - hysteresis = <2000>; - type = "active"; - }; - - cpu_trip_active_low: active-low { - temperature = <45000>; - hysteresis = <2000>; - type = "active"; - }; - - cpu_trip_active_lowest: active-lowest { - temperature = <40000>; - hysteresis = <2000>; - type = "active"; - }; - }; - - cooling-maps { - cpu-active-highest { - /* active: set fan to cooling level 7 */ - cooling-device = <&fan 7 7>; - trip = <&cpu_trip_active_highest>; - }; - - cpu-active-high { - /* active: set fan to cooling level 5 */ - cooling-device = <&fan 5 5>; - trip = <&cpu_trip_active_high>; - }; - - cpu-active-med { - /* active: set fan to cooling level 3 */ - cooling-device = <&fan 3 3>; - trip = <&cpu_trip_active_med>; - }; - - cpu-active-low { - /* active: set fan to cooling level 2 */ - cooling-device = <&fan 2 2>; - trip = <&cpu_trip_active_low>; - }; - - cpu-active-lowest { - /* active: set fan to cooling level 1 */ - cooling-device = <&fan 1 1>; - trip = <&cpu_trip_active_lowest>; - }; - }; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupt-parent = <&gic>; - clock-frequency = <13000000>; - interrupts = , - , - , - ; - - }; - - trng { - compatible = "mediatek,mt7981-rng"; - }; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7986a-rfb-spim-nand.dts b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7986a-rfb-spim-nand.dts deleted file mode 100644 index ce007099d2b..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7986a-rfb-spim-nand.dts +++ /dev/null @@ -1,52 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */ - -#include "mt7986a-rfb.dtsi" - -/ { - compatible = "mediatek,mt7986a-rfb-snand"; -}; - -&spi0 { - status = "okay"; - - spi_nand: spi_nand@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <10000000>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "BL2"; - reg = <0x00000 0x0100000>; - read-only; - }; - partition@100000 { - label = "u-boot-env"; - reg = <0x0100000 0x0080000>; - }; - factory: partition@180000 { - label = "Factory"; - reg = <0x180000 0x0200000>; - }; - partition@380000 { - label = "FIP"; - reg = <0x380000 0x0200000>; - }; - partition@580000 { - label = "ubi"; - reg = <0x580000 0x4000000>; - }; - }; - }; -}; - -&wifi { - mediatek,mtd-eeprom = <&factory 0>; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7986a-rfb-spim-nor.dts b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7986a-rfb-spim-nor.dts deleted file mode 100644 index ea148315f05..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7986a-rfb-spim-nor.dts +++ /dev/null @@ -1,51 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */ - -#include "mt7986a-rfb.dtsi" - -/ { - compatible = "mediatek,mt7986a-rfb-snor"; -}; - -&spi0 { - status = "okay"; - - spi_nor: spi_nor@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <52000000>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@00000 { - label = "BL2"; - reg = <0x00000 0x0040000>; - }; - partition@40000 { - label = "u-boot-env"; - reg = <0x40000 0x0010000>; - }; - factory: partition@50000 { - label = "Factory"; - reg = <0x50000 0x00B0000>; - }; - partition@100000 { - label = "FIP"; - reg = <0x100000 0x0080000>; - }; - partition@180000 { - label = "firmware"; - reg = <0x180000 0xE00000>; - }; - }; - }; -}; - -&wifi { - mediatek,mtd-eeprom = <&factory 0>; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dtsi b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dtsi deleted file mode 100644 index 26d560bd4bc..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dtsi +++ /dev/null @@ -1,389 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2021 MediaTek Inc. - * Author: Sam.Shih - */ - -/dts-v1/; -#include "mt7986a.dtsi" - -/ { - model = "MediaTek MT7986a RFB"; - compatible = "mediatek,mt7986a-rfb"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory { - reg = <0 0x40000000 0 0x40000000>; - }; - - reg_1p8v: regulator-1p8v { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_5v: regulator-5v { - compatible = "regulator-fixed"; - regulator-name = "fixed-5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - regulator-always-on; - }; -}; - -ð { - status = "okay"; - - gmac0: mac@0 { - compatible = "mediatek,eth-mac"; - reg = <0>; - phy-mode = "2500base-x"; - - fixed-link { - speed = <2500>; - full-duplex; - pause; - }; - }; - - gmac1: mac@1 { - compatible = "mediatek,eth-mac"; - reg = <1>; - phy-mode = "2500base-x"; - }; - - mdio: mdio-bus { - #address-cells = <1>; - #size-cells = <0>; - }; -}; - -&wifi { - status = "okay"; - pinctrl-names = "default", "dbdc"; - pinctrl-0 = <&wf_2g_5g_pins>; - pinctrl-1 = <&wf_dbdc_pins>; -}; - -&mdio { - phy5: phy@5 { - compatible = "ethernet-phy-id67c9.de0a"; - reg = <5>; - - reset-gpios = <&pio 6 1>; - reset-deassert-us = <20000>; - }; - - phy6: phy@6 { - compatible = "ethernet-phy-id67c9.de0a"; - reg = <6>; - }; - - switch: switch@1f { - compatible = "mediatek,mt7531"; - reg = <31>; - reset-gpios = <&pio 5 0>; - }; -}; - -&crypto { - status = "okay"; -}; - -&mmc0 { - pinctrl-names = "default", "state_uhs"; - pinctrl-0 = <&mmc0_pins_default>; - pinctrl-1 = <&mmc0_pins_uhs>; - bus-width = <8>; - max-frequency = <200000000>; - cap-mmc-highspeed; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - hs400-ds-delay = <0x14014>; - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_1p8v>; - non-removable; - no-sd; - no-sdio; - status = "okay"; -}; - -&pcie { - pinctrl-names = "default"; - pinctrl-0 = <&pcie_pins>; - status = "okay"; -}; - -&pcie_phy { - status = "okay"; -}; - -&pio { - mmc0_pins_default: mmc0-pins { - mux { - function = "emmc"; - groups = "emmc_51"; - }; - conf-cmd-dat { - pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", - "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", - "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; - input-enable; - drive-strength = <4>; - mediatek,pull-up-adv = <1>; /* pull-up 10K */ - }; - conf-clk { - pins = "EMMC_CK"; - drive-strength = <6>; - mediatek,pull-down-adv = <2>; /* pull-down 50K */ - }; - conf-ds { - pins = "EMMC_DSL"; - mediatek,pull-down-adv = <2>; /* pull-down 50K */ - }; - conf-rst { - pins = "EMMC_RSTB"; - drive-strength = <4>; - mediatek,pull-up-adv = <1>; /* pull-up 10K */ - }; - }; - - mmc0_pins_uhs: mmc0-uhs-pins { - mux { - function = "emmc"; - groups = "emmc_51"; - }; - conf-cmd-dat { - pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", - "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", - "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; - input-enable; - drive-strength = <4>; - mediatek,pull-up-adv = <1>; /* pull-up 10K */ - }; - conf-clk { - pins = "EMMC_CK"; - drive-strength = <6>; - mediatek,pull-down-adv = <2>; /* pull-down 50K */ - }; - conf-ds { - pins = "EMMC_DSL"; - mediatek,pull-down-adv = <2>; /* pull-down 50K */ - }; - conf-rst { - pins = "EMMC_RSTB"; - drive-strength = <4>; - mediatek,pull-up-adv = <1>; /* pull-up 10K */ - }; - }; - - pcie_pins: pcie-pins { - mux { - function = "pcie"; - groups = "pcie_clk", "pcie_wake", "pcie_pereset"; - }; - }; - - spic_pins_g2: spic-pins-29-to-32 { - mux { - function = "spi"; - groups = "spi1_2"; - }; - }; - - spi_flash_pins: spi-flash-pins-33-to-38 { - mux { - function = "spi"; - groups = "spi0", "spi0_wp_hold"; - }; - conf-pu { - pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; - drive-strength = <8>; - mediatek,pull-up-adv = <0>; /* bias-disable */ - }; - conf-pd { - pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; - drive-strength = <8>; - mediatek,pull-down-adv = <0>; /* bias-disable */ - }; - }; - - uart1_pins: uart1-pins { - mux { - function = "uart"; - groups = "uart1"; - }; - }; - - uart2_pins: uart2-pins { - mux { - function = "uart"; - groups = "uart2"; - }; - }; - - wf_2g_5g_pins: wf_2g_5g-pins { - mux { - function = "wifi"; - groups = "wf_2g", "wf_5g"; - }; - conf { - pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", - "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", - "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", - "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", - "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", - "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", - "WF1_TOP_CLK", "WF1_TOP_DATA"; - drive-strength = <4>; - }; - }; - - wf_dbdc_pins: wf_dbdc-pins { - mux { - function = "wifi"; - groups = "wf_dbdc"; - }; - conf { - pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", - "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", - "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", - "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", - "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", - "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", - "WF1_TOP_CLK", "WF1_TOP_DATA"; - drive-strength = <4>; - }; - }; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi_flash_pins>; - cs-gpios = <0>, <0>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; -}; - -&spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&spic_pins_g2>; - status = "okay"; - - proslic_spi: proslic_spi@0 { - compatible = "silabs,proslic_spi"; - reg = <0>; - spi-max-frequency = <10000000>; - spi-cpha = <1>; - spi-cpol = <1>; - channel_count = <1>; - debug_level = <4>; /* 1 = TRC, 2 = DBG, 4 = ERR */ - reset_gpio = <&pio 7 0>; - ig,enable-spi = <1>; /* 1: Enable, 0: Disable */ - }; -}; - -&gmac1 { - phy-mode = "2500base-x"; - phy-connection-type = "2500base-x"; - phy-handle = <&phy6>; -}; - -&switch { - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan1"; - }; - - port@1 { - reg = <1>; - label = "lan2"; - }; - - port@2 { - reg = <2>; - label = "lan3"; - }; - - port@3 { - reg = <3>; - label = "lan4"; - }; - - port@4 { - reg = <4>; - label = "wan"; - }; - - port@5 { - reg = <5>; - label = "lan6"; - - phy-mode = "2500base-x"; - phy-handle = <&phy5>; - }; - - port@6 { - reg = <6>; - ethernet = <&gmac0>; - phy-mode = "2500base-x"; - - fixed-link { - speed = <2500>; - full-duplex; - pause; - }; - }; - }; -}; - -&ssusb { - vusb33-supply = <®_3p3v>; - vbus-supply = <®_5v>; - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; - status = "okay"; -}; - -&usb_phy { - status = "okay"; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtso b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtso deleted file mode 100644 index 4945185d699..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtso +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2021 MediaTek Inc. - * Author: Frank Wunderlich - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "bananapi,bpi-r4", "mediatek,mt7988a"; - - fragment@0 { - target-path = "/soc/mmc@11230000"; - __overlay__ { - pinctrl-names = "default", "state_uhs"; - pinctrl-0 = <&mmc0_pins_emmc_51>; - pinctrl-1 = <&mmc0_pins_emmc_51>; - bus-width = <8>; - max-frequency = <200000000>; - cap-mmc-highspeed; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - hs400-ds-delay = <0x12814>; - vqmmc-supply = <®_1p8v>; - vmmc-supply = <®_3p3v>; - non-removable; - no-sd; - no-sdio; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - card@0 { - compatible = "mmc-card"; - reg = <0>; - - block { - compatible = "block-device"; - partitions { - block-partition-env { - partname = "ubootenv"; - nvmem-layout { - compatible = "u-boot,env-layout"; - }; - }; - emmc_rootfs: block-partition-production { - partname = "production"; - }; - }; - }; - }; - }; - }; - - fragment@2 { - target-path = "/chosen"; - __overlay__ { - rootdisk-emmc = <&emmc_rootfs>; - }; - }; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-rtc.dtso b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-rtc.dtso deleted file mode 100644 index 39910b8cfee..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-rtc.dtso +++ /dev/null @@ -1,19 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2023 - * Author: Daniel Golle - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "bananapi,bpi-r4", "mediatek,mt7988a"; - - fragment@0 { - target = <&pcf8563>; - __overlay__ { - status = "okay"; - }; - }; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-sd.dtso b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-sd.dtso deleted file mode 100644 index 1f5e1491a47..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-sd.dtso +++ /dev/null @@ -1,60 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2023 MediaTek Inc. - * Author: Frank Wunderlich - */ - -/dts-v1/; -/plugin/; - -#include - -/ { - compatible = "bananapi,bpi-r4", "mediatek,mt7988a"; - - fragment@1 { - target-path = "/soc/mmc@11230000"; - __overlay__ { - pinctrl-names = "default", "state_uhs"; - pinctrl-0 = <&mmc0_pins_sdcard>; - pinctrl-1 = <&mmc0_pins_sdcard>; - cd-gpios = <&pio 12 GPIO_ACTIVE_LOW>; - bus-width = <4>; - max-frequency = <52000000>; - cap-sd-highspeed; - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_3p3v>; - no-mmc; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - card@0 { - compatible = "mmc-card"; - reg = <0>; - - block { - compatible = "block-device"; - partitions { - block-partition-env { - partname = "ubootenv"; - nvmem-layout { - compatible = "u-boot,env-layout"; - }; - }; - sd_rootfs: block-partition-production { - partname = "production"; - }; - }; - }; - }; - }; - }; - - fragment@2 { - target-path = "/chosen"; - __overlay__ { - rootdisk-sd = <&sd_rootfs>; - }; - }; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-wifi-mt7996a.dtso b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-wifi-mt7996a.dtso deleted file mode 100644 index 8a029b149ff..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-wifi-mt7996a.dtso +++ /dev/null @@ -1,99 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/dts-v1/; -/plugin/; - -#include - -/ { - compatible = "bananapi,bpi-r4", "mediatek,mt7988a"; - - fragment@0 { - target-path = "/"; - __overlay__ { - wifi_12v: regulator-wifi-12v { - compatible = "regulator-fixed"; - regulator-name = "wifi"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - gpio = <&pio 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - }; - }; - - fragment@1 { - target = <&i2c_wifi>; - __overlay__ { - // 5G WIFI MAC Address EEPROM - wifi_eeprom@51 { - compatible = "atmel,24c02"; - reg = <0x51>; - address-bits = <8>; - page-size = <8>; - size = <256>; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_5g: macaddr@0 { - reg = <0x0 0x6>; - }; - }; - }; - - // 6G WIFI MAC Address EEPROM - wifi_eeprom@52 { - compatible = "atmel,24c02"; - reg = <0x52>; - address-bits = <8>; - page-size = <8>; - size = <256>; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_6g: macaddr@0 { - reg = <0x0 0x6>; - }; - }; - }; - }; - }; - - fragment@2 { - target = <&pcie0>; - __overlay__ { - pcie@0,0 { - reg = <0x0000 0 0 0 0>; - - wifi@0,0 { - compatible = "mediatek,mt76"; - reg = <0x0000 0 0 0 0>; - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_5g>; - }; - }; - }; - }; - - fragment@3 { - target = <&pcie1>; - __overlay__ { - pcie@0,0 { - reg = <0x0000 0 0 0 0>; - - wifi@0,0 { - compatible = "mediatek,mt76"; - reg = <0x0000 0 0 0 0>; - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_6g>; - }; - }; - }; - }; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts deleted file mode 100644 index 74f480e0a12..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts +++ /dev/null @@ -1,409 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2022 MediaTek Inc. - * Author: Sam.Shih - */ - -/dts-v1/; -#include "mt7988a.dtsi" -#include -#include -#include -#include - -/ { - model = "Bananapi BPI-R4"; - compatible = "bananapi,bpi-r4", - "mediatek,mt7988a"; - - aliases { - ethernet0 = &gmac0; - ethernet1 = &gmac1; - serial0 = &uart0; - led-boot = &led_green; - led-failsafe = &led_green; - led-running = &led_green; - led-upgrade = &led_green; - }; - - chosen { - stdout-path = &uart0; - bootargs = "console=ttyS0,115200n1 loglevel=8 pci=pcie_bus_perf ubi.block=0,fit root=/dev/fit0 rootwait"; - rootdisk-spim-nand = <&ubi_rootfs>; - }; - - memory { - reg = <0x00 0x40000000 0x00 0x10000000>; - }; - - /* SFP1 cage (WAN) */ - sfp1: sfp1 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp1>; - los-gpios = <&pio 54 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&pio 82 GPIO_ACTIVE_LOW>; - tx-disable-gpios = <&pio 70 GPIO_ACTIVE_HIGH>; - tx-fault-gpios = <&pio 69 GPIO_ACTIVE_HIGH>; - rate-select0-gpios = <&pio 21 GPIO_ACTIVE_LOW>; - maximum-power-milliwatt = <3000>; - }; - - /* SFP2 cage (LAN) */ - sfp2: sfp2 { - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp2>; - los-gpios = <&pio 2 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&pio 83 GPIO_ACTIVE_LOW>; - tx-disable-gpios = <&pio 0 GPIO_ACTIVE_HIGH>; - tx-fault-gpios = <&pio 1 GPIO_ACTIVE_HIGH>; - rate-select0-gpios = <&pio 3 GPIO_ACTIVE_LOW>; - maximum-power-milliwatt = <3000>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - wps { - label = "WPS"; - linux,code = ; - gpios = <&pio 14 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - led_green: led-green { - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&pio 79 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - led_blue: led-blue { - function = LED_FUNCTION_WPS; - color = ; - gpios = <&pio 63 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; -}; - -ð { - status = "okay"; -}; - -&gmac0 { - status = "okay"; -}; - -&gmac1 { - sfp = <&sfp2>; - managed = "in-band-status"; - phy-mode = "usxgmii"; - status = "okay"; -}; - -&gmac2 { - sfp = <&sfp1>; - managed = "in-band-status"; - phy-mode = "usxgmii"; - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&gsw_phy0 { - pinctrl-names = "gbe-led"; - pinctrl-0 = <&gbe0_led0_pins>; -}; - -&gsw_port0 { - label = "wan"; -}; - -&gsw_phy0_led0 { - status = "okay"; - color = ; -}; - -&gsw_phy1 { - pinctrl-names = "gbe-led"; - pinctrl-0 = <&gbe1_led0_pins>; -}; - -&gsw_phy1_led0 { - status = "okay"; - color = ; -}; - -&gsw_phy2 { - pinctrl-names = "gbe-led"; - pinctrl-0 = <&gbe2_led0_pins>; -}; - -&gsw_phy2_led0 { - status = "okay"; - color = ; -}; - -&gsw_phy3 { - pinctrl-names = "gbe-led"; - pinctrl-0 = <&gbe3_led0_pins>; -}; - -&gsw_phy3_led0 { - status = "okay"; - color = ; -}; - -&cpu0 { - proc-supply = <&rt5190_buck3>; -}; - -&cpu1 { - proc-supply = <&rt5190_buck3>; -}; - -&cpu2 { - proc-supply = <&rt5190_buck3>; -}; - -&cpu3 { - proc-supply = <&rt5190_buck3>; -}; - -&cci { - proc-supply = <&rt5190_buck3>; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "okay"; - - rt5190a_64: rt5190a@64 { - compatible = "richtek,rt5190a"; - reg = <0x64>; - vin2-supply = <&rt5190_buck1>; - vin3-supply = <&rt5190_buck1>; - vin4-supply = <&rt5190_buck1>; - - regulators { - rt5190_buck1: buck1 { - regulator-name = "rt5190a-buck1"; - regulator-min-microvolt = <5090000>; - regulator-max-microvolt = <5090000>; - regulator-allowed-modes = - ; - regulator-boot-on; - regulator-always-on; - }; - buck2 { - regulator-name = "vcore"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1400000>; - regulator-boot-on; - regulator-always-on; - }; - rt5190_buck3: buck3 { - regulator-name = "vproc"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1400000>; - regulator-boot-on; - }; - buck4 { - regulator-name = "rt5190a-buck4"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - regulator-allowed-modes = - ; - regulator-boot-on; - regulator-always-on; - }; - ldo { - regulator-name = "rt5190a-ldo"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-boot-on; - regulator-always-on; - }; - }; - }; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_1_pins>; - status = "okay"; - - pca9545: i2c-switch@70 { - reg = <0x70>; - compatible = "nxp,pca9545"; - reset-gpios = <&pio 5 GPIO_ACTIVE_LOW>; - #address-cells = <1>; - #size-cells = <0>; - - i2c_rtc: i2c@0 { //eeprom,rtc,ngff - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - address-bits = <8>; - page-size = <8>; - size = <256>; - }; - - eeprom@57 { - compatible = "atmel,24c02"; - reg = <0x57>; - address-bits = <8>; - page-size = <8>; - size = <256>; - }; - - pcf8563: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - status = "disabled"; - }; - }; - - i2c_sfp1: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - i2c_sfp2: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - i2c_wifi: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - }; -}; - -/* mPCIe SIM2 */ -&pcie0 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie0_pins>; - status = "okay"; -}; - -/* mPCIe SIM3 */ -&pcie1 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie1_pins>; - status = "okay"; -}; - -/* M.2 key-B SIM1 */ -&pcie2 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie2_pins>; - status = "okay"; -}; - -/* M.2 key-M SSD */ -&pcie3 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie3_pins>; - status = "okay"; -}; - -&ssusb1 { - status = "okay"; -}; - -&tphy { - status = "okay"; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_flash_pins>; - status = "okay"; - - spi_nand: spi_nand@0 { - compatible = "spi-nand"; - reg = <0>; - spi-max-frequency = <52000000>; - spi-tx-buswidth = <4>; - spi-rx-buswidth = <4>; - }; -}; - -&spi_nand { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "bl2"; - reg = <0x0 0x200000>; - read-only; - }; - - partition@200000 { - label = "ubi"; - reg = <0x200000 0x7e00000>; - compatible = "linux,ubi"; - - volumes { - ubi-volume-ubootenv { - volname = "ubootenv"; - nvmem-layout { - compatible = "u-boot,env-redundant-bool-layout"; - }; - }; - - ubi-volume-ubootenv2 { - volname = "ubootenv2"; - nvmem-layout { - compatible = "u-boot,env-redundant-bool-layout"; - }; - }; - - ubi_rootfs: ubi-volume-fit { - volname = "fit"; - }; - }; - }; - }; -}; - -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart1_2_lite_pins>; -}; - -&uart2 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart2_3_pins>; -}; - -&watchdog { - status = "okay"; -}; - -&xphy { - status = "okay"; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-emmc.dtso b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-emmc.dtso deleted file mode 100644 index 3f8ac2ae382..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-emmc.dtso +++ /dev/null @@ -1,33 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2021 MediaTek Inc. - * Author: Frank Wunderlich - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a"; - - fragment@0 { - target = <&mmc0>; - __overlay__ { - pinctrl-names = "default", "state_uhs"; - pinctrl-0 = <&mmc0_pins_emmc_51>; - pinctrl-1 = <&mmc0_pins_emmc_51>; - bus-width = <8>; - max-frequency = <200000000>; - cap-mmc-highspeed; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - hs400-ds-delay = <0x12814>; - vqmmc-supply = <®_1p8v>; - vmmc-supply = <®_3p3v>; - non-removable; - no-sd; - no-sdio; - status = "okay"; - }; - }; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-aqr.dtso b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-aqr.dtso deleted file mode 100644 index d21a61ad19f..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-aqr.dtso +++ /dev/null @@ -1,41 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2022 MediaTek Inc. - * Author: Sam.Shih - */ - -/dts-v1/; -/plugin/; - -#include - -/ { - compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a"; - - fragment@0 { - target = <&mdio_bus>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - - /* external Aquantia AQR113C */ - phy0: ethernet-phy@0 { - reg = <0>; - compatible = "ethernet-phy-ieee802.3-c45"; - reset-gpios = <&pio 72 GPIO_ACTIVE_LOW>; - reset-assert-us = <100000>; - reset-deassert-us = <221000>; - }; - }; - }; - - fragment@1 { - target = <&gmac1>; - __overlay__ { - phy-mode = "usxgmii"; - phy-connection-type = "usxgmii"; - phy = <&phy0>; - status = "okay"; - }; - }; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-i2p5g-phy.dtso b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-i2p5g-phy.dtso deleted file mode 100644 index 86ab7566dc2..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-i2p5g-phy.dtso +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2022 MediaTek Inc. - * Author: Sam.Shih - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a"; - - fragment@0 { - target = <&gmac1>; - __overlay__ { - phy-mode = "internal"; - phy-connection-type = "internal"; - phy = <&int_2p5g_phy>; - status = "okay"; - }; - }; - - fragment@1 { - target = <&int_2p5g_phy>; - __overlay__ { - pinctrl-names = "i2p5gbe-led"; - pinctrl-0 = <&i2p5gbe_led0_pins>; - }; - }; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-mxl.dtso b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-mxl.dtso deleted file mode 100644 index 34a23bbd7eb..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-mxl.dtso +++ /dev/null @@ -1,39 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2022 MediaTek Inc. - * Author: Sam.Shih - */ - -/dts-v1/; -/plugin/; - -#include - -/ { - compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a"; - - fragment@0 { - target = <&mdio_bus>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - - /* external Maxlinear GPY211C */ - phy13: ethernet-phy@13 { - reg = <13>; - compatible = "ethernet-phy-ieee802.3-c45"; - phy-mode = "2500base-x"; - }; - }; - }; - - fragment@1 { - target = <&gmac1>; - __overlay__ { - phy-mode = "2500base-x"; - phy-connection-type = "2500base-x"; - phy = <&phy13>; - status = "okay"; - }; - }; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-sfp.dtso b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-sfp.dtso deleted file mode 100644 index ba40a119cbd..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-sfp.dtso +++ /dev/null @@ -1,47 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2022 MediaTek Inc. - * Author: Sam.Shih - */ - -/dts-v1/; -/plugin/; - -#include - -/ { - compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a"; - - fragment@0 { - target = <&i2c2>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_0_pins>; - status = "okay"; - }; - }; - - fragment@1 { - target-path = "/"; - __overlay__ { - sfp_esp1: sfp@1 { - compatible = "sff,sfp"; - i2c-bus = <&i2c2>; - mod-def0-gpios = <&pio 82 GPIO_ACTIVE_LOW>; - los-gpios = <&pio 81 GPIO_ACTIVE_HIGH>; - tx-disable-gpios = <&pio 36 GPIO_ACTIVE_HIGH>; - maximum-power-milliwatt = <3000>; - }; - }; - }; - - fragment@2 { - target = <&gmac1>; - __overlay__ { - phy-mode = "10gbase-r"; - managed = "in-band-status"; - sfp = <&sfp_esp1>; - status = "okay"; - }; - }; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-aqr.dtso b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-aqr.dtso deleted file mode 100644 index 140391fc45a..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-aqr.dtso +++ /dev/null @@ -1,41 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2022 MediaTek Inc. - * Author: Sam.Shih - */ - -/dts-v1/; -/plugin/; - -#include - -/ { - compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a"; - - fragment@0 { - target = <&mdio_bus>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - - /* external Aquantia AQR113C */ - phy8: ethernet-phy@8 { - reg = <8>; - compatible = "ethernet-phy-ieee802.3-c45"; - reset-gpios = <&pio 71 GPIO_ACTIVE_LOW>; - reset-assert-us = <100000>; - reset-deassert-us = <221000>; - }; - }; - }; - - fragment@1 { - target = <&gmac2>; - __overlay__ { - phy-mode = "usxgmii"; - phy-connection-type = "usxgmii"; - phy = <&phy8>; - status = "okay"; - }; - }; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-mxl.dtso b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-mxl.dtso deleted file mode 100644 index 19e0b2799fc..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-mxl.dtso +++ /dev/null @@ -1,39 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2022 MediaTek Inc. - * Author: Sam.Shih - */ - -/dts-v1/; -/plugin/; - -#include - -/ { - compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a"; - - fragment@0 { - target = <&mdio_bus>; - __overlay__ { - #address-cells = <1>; - #size-cells = <0>; - - /* external Maxlinear GPY211C */ - phy5: ethernet-phy@5 { - reg = <5>; - compatible = "ethernet-phy-ieee802.3-c45"; - phy-mode = "2500base-x"; - }; - }; - }; - - fragment@1 { - target = <&gmac2>; - __overlay__ { - phy-mode = "2500base-x"; - phy-connection-type = "2500base-x"; - phy = <&phy5>; - status = "okay"; - }; - }; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-sfp.dtso b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-sfp.dtso deleted file mode 100644 index b9aabd2726e..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-sfp.dtso +++ /dev/null @@ -1,47 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2022 MediaTek Inc. - * Author: Sam.Shih - */ - -/dts-v1/; -/plugin/; - -#include - -/ { - compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a"; - - fragment@0 { - target = <&i2c1>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_sfp_pins>; - status = "okay"; - }; - }; - - fragment@1 { - target-path = "/"; - __overlay__ { - sfp_esp0: sfp@0 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - mod-def0-gpios = <&pio 35 GPIO_ACTIVE_LOW>; - los-gpios = <&pio 33 GPIO_ACTIVE_HIGH>; - tx-disable-gpios = <&pio 29 GPIO_ACTIVE_HIGH>; - maximum-power-milliwatt = <3000>; - }; - }; - }; - - fragment@2 { - target = <&gmac2>; - __overlay__ { - phy-mode = "10gbase-r"; - managed = "in-band-status"; - sfp = <&sfp_esp0>; - status = "okay"; - }; - }; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-sd.dtso b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-sd.dtso deleted file mode 100644 index 04472cc12dc..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-sd.dtso +++ /dev/null @@ -1,31 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2023 MediaTek Inc. - * Author: Frank Wunderlich - */ - -/dts-v1/; -/plugin/; - -#include - -/ { - compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a"; - - fragment@1 { - target-path = <&mmc0>; - __overlay__ { - pinctrl-names = "default", "state_uhs"; - pinctrl-0 = <&mmc0_pins_sdcard>; - pinctrl-1 = <&mmc0_pins_sdcard>; - cd-gpios = <&pio 69 GPIO_ACTIVE_LOW>; - bus-width = <4>; - max-frequency = <52000000>; - cap-sd-highspeed; - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_3p3v>; - no-mmc; - status = "okay"; - }; - }; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-snfi-nand.dtso b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-snfi-nand.dtso deleted file mode 100644 index 86b0042f647..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-snfi-nand.dtso +++ /dev/null @@ -1,69 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2022 MediaTek Inc. - * Author: Sam.Shih - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a"; - - fragment@0 { - target = <&snand>; - __overlay__ { - status = "okay"; - - flash@0 { - compatible = "spi-nand"; - reg = <0>; - spi-max-frequency = <52000000>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - mediatek,nmbm; - mediatek,bmt-max-ratio = <1>; - mediatek,bmt-max-reserved-blocks = <64>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "BL2"; - reg = <0x00000 0x0100000>; - read-only; - }; - - partition@100000 { - label = "u-boot-env"; - reg = <0x0100000 0x0080000>; - }; - - partition@180000 { - label = "Factory"; - reg = <0x180000 0x0400000>; - }; - - partition@580000 { - label = "FIP"; - reg = <0x580000 0x0200000>; - }; - - partition@780000 { - label = "ubi"; - reg = <0x780000 0x7080000>; - }; - }; - }; - }; - }; - - fragment@1 { - target = <&bch>; - __overlay__ { - status = "okay"; - }; - }; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-spim-nand.dtso b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-spim-nand.dtso deleted file mode 100644 index a9eca00d441..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-spim-nand.dtso +++ /dev/null @@ -1,64 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2022 MediaTek Inc. - * Author: Sam.Shih - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a"; - - fragment@0 { - target = <&spi0>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_flash_pins>; - status = "okay"; - - flash@0 { - compatible = "spi-nand"; - reg = <0>; - spi-max-frequency = <52000000>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - mediatek,nmbm; - mediatek,bmt-max-ratio = <1>; - mediatek,bmt-max-reserved-blocks = <64>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "BL2"; - reg = <0x00000 0x0100000>; - read-only; - }; - - partition@100000 { - label = "u-boot-env"; - reg = <0x0100000 0x0080000>; - }; - - partition@180000 { - label = "Factory"; - reg = <0x180000 0x0400000>; - }; - - partition@580000 { - label = "FIP"; - reg = <0x580000 0x0200000>; - }; - - partition@780000 { - label = "ubi"; - reg = <0x780000 0x7080000>; - }; - }; - }; - }; - }; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-spim-nor.dtso b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-spim-nor.dtso deleted file mode 100644 index 33bd57b3fb6..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb-spim-nor.dtso +++ /dev/null @@ -1,59 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2022 MediaTek Inc. - * Author: Sam.Shih - */ - -/dts-v1/; -/plugin/; - -/ { - compatible = "mediatek,mt7988a-rfb", "mediatek,mt7988a"; - - fragment@0 { - target = <&spi2>; - __overlay__ { - pinctrl-names = "default"; - pinctrl-0 = <&spi2_flash_pins>; - status = "okay"; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - spi-cal-enable; - spi-cal-mode = "read-data"; - spi-cal-datalen = <7>; - spi-cal-data = /bits/ 8 < - 0x53 0x46 0x5F 0x42 0x4F 0x4F 0x54>; /* SF_BOOT */ - spi-cal-addrlen = <1>; - spi-cal-addr = /bits/ 32 <0x0>; - reg = <0>; - spi-max-frequency = <52000000>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - - partition@00000 { - label = "BL2"; - reg = <0x00000 0x0040000>; - }; - partition@40000 { - label = "u-boot-env"; - reg = <0x40000 0x0010000>; - }; - partition@50000 { - label = "Factory"; - reg = <0x50000 0x0200000>; - }; - partition@250000 { - label = "FIP"; - reg = <0x250000 0x0080000>; - }; - partition@2D0000 { - label = "firmware"; - reg = <0x2D0000 0x1D30000>; - }; - }; - }; - }; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb.dts b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb.dts deleted file mode 100644 index 5012e7a4989..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-rfb.dts +++ /dev/null @@ -1,200 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2022 MediaTek Inc. - * Author: Sam.Shih - */ - -/dts-v1/; -#include "mt7988a.dtsi" -#include -#include -#include - -/ { - model = "MediaTek MT7988A Reference Board"; - compatible = "mediatek,mt7988a-rfb", - "mediatek,mt7988a"; - - chosen { - bootargs = "console=ttyS0,115200n1 loglevel=8 \ - earlycon=uart8250,mmio32,0x11000000 \ - pci=pcie_bus_perf"; - }; - - memory { - reg = <0 0x40000000 0 0x40000000>; - }; -}; - -ð { - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; -}; - -&gmac0 { - status = "okay"; -}; - -&cpu0 { - proc-supply = <&rt5190_buck3>; -}; - -&cpu1 { - proc-supply = <&rt5190_buck3>; -}; - -&cpu2 { - proc-supply = <&rt5190_buck3>; -}; - -&cpu3 { - proc-supply = <&rt5190_buck3>; -}; - -&cci { - proc-supply = <&rt5190_buck3>; -}; - -ð { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&gsw_phy0 { - pinctrl-names = "gbe-led"; - pinctrl-0 = <&gbe0_led0_pins>; -}; - -&gsw_phy0_led0 { - status = "okay"; - color = ; -}; - -&gsw_phy1 { - pinctrl-names = "gbe-led"; - pinctrl-0 = <&gbe1_led0_pins>; -}; - -&gsw_phy1_led0 { - status = "okay"; - color = ; -}; - -&gsw_phy2 { - pinctrl-names = "gbe-led"; - pinctrl-0 = <&gbe2_led0_pins>; -}; - -&gsw_phy2_led0 { - status = "okay"; - color = ; -}; - -&gsw_phy3 { - pinctrl-names = "gbe-led"; - pinctrl-0 = <&gbe3_led0_pins>; -}; - -&gsw_phy3_led0 { - status = "okay"; - color = ; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "okay"; - - rt5190a_64: rt5190a@64 { - compatible = "richtek,rt5190a"; - reg = <0x64>; - /*interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;*/ - vin2-supply = <&rt5190_buck1>; - vin3-supply = <&rt5190_buck1>; - vin4-supply = <&rt5190_buck1>; - - regulators { - rt5190_buck1: buck1 { - regulator-name = "rt5190a-buck1"; - regulator-min-microvolt = <5090000>; - regulator-max-microvolt = <5090000>; - regulator-allowed-modes = - ; - regulator-boot-on; - regulator-always-on; - }; - buck2 { - regulator-name = "vcore"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1400000>; - regulator-boot-on; - regulator-always-on; - }; - rt5190_buck3: buck3 { - regulator-name = "vproc"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1400000>; - regulator-boot-on; - }; - buck4 { - regulator-name = "rt5190a-buck4"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - regulator-allowed-modes = - ; - regulator-boot-on; - regulator-always-on; - }; - ldo { - regulator-name = "rt5190a-ldo"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-boot-on; - regulator-always-on; - }; - }; - }; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; -}; - -&pcie2 { - status = "disabled"; -}; - -&pcie3 { - status = "okay"; -}; - -&ssusb0 { - status = "okay"; -}; - -&ssusb1 { - status = "okay"; -}; - -&tphy { - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&watchdog { - status = "okay"; -}; - -&xphy { - status = "okay"; -}; diff --git a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a.dtsi deleted file mode 100644 index caad6e5577e..00000000000 --- a/target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a.dtsi +++ /dev/null @@ -1,1573 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2023 MediaTek Inc. - * Author: Sam.Shih - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -/* TOPRGU resets */ -#define MT7988_TOPRGU_SGMII0_GRST 1 -#define MT7988_TOPRGU_SGMII1_GRST 2 -#define MT7988_TOPRGU_XFI0_GRST 12 -#define MT7988_TOPRGU_XFI1_GRST 13 -#define MT7988_TOPRGU_XFI_PEXTP0_GRST 14 -#define MT7988_TOPRGU_XFI_PEXTP1_GRST 15 -#define MT7988_TOPRGU_XFI_PLL_GRST 16 - -/ { - compatible = "mediatek,mt7988a"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - cci: cci { - compatible = "mediatek,mt7988-cci", - "mediatek,mt8183-cci"; - clocks = <&mcusys CLK_MCU_BUS_DIV_SEL>, - <&topckgen CLK_TOP_XTAL>; - clock-names = "cci", "intermediate"; - operating-points-v2 = <&cci_opp>; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - compatible = "arm,cortex-a73"; - reg = <0x0>; - device_type = "cpu"; - enable-method = "psci"; - clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>, - <&topckgen CLK_TOP_XTAL>; - clock-names = "cpu", "intermediate"; - operating-points-v2 = <&cluster0_opp>; - mediatek,cci = <&cci>; - }; - - cpu1: cpu@1 { - compatible = "arm,cortex-a73"; - reg = <0x1>; - device_type = "cpu"; - enable-method = "psci"; - clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>, - <&topckgen CLK_TOP_XTAL>; - clock-names = "cpu", "intermediate"; - operating-points-v2 = <&cluster0_opp>; - mediatek,cci = <&cci>; - }; - - cpu2: cpu@2 { - compatible = "arm,cortex-a73"; - reg = <0x2>; - device_type = "cpu"; - enable-method = "psci"; - clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>, - <&topckgen CLK_TOP_XTAL>; - clock-names = "cpu", "intermediate"; - operating-points-v2 = <&cluster0_opp>; - mediatek,cci = <&cci>; - }; - - cpu3: cpu@3 { - compatible = "arm,cortex-a73"; - reg = <0x3>; - device_type = "cpu"; - enable-method = "psci"; - clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>, - <&topckgen CLK_TOP_XTAL>; - clock-names = "cpu", "intermediate"; - operating-points-v2 = <&cluster0_opp>; - mediatek,cci = <&cci>; - }; - - cluster0_opp: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <850000>; - }; - - opp01 { - opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <850000>; - }; - - opp02 { - opp-hz = /bits/ 64 <1500000000>; - opp-microvolt = <850000>; - }; - - opp03 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <900000>; - }; - }; - }; - - cci_opp: opp_table_cci { - compatible = "operating-points-v2"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <480000000>; - opp-microvolt = <850000>; - }; - - opp01 { - opp-hz = /bits/ 64 <660000000>; - opp-microvolt = <850000>; - }; - - opp02 { - opp-hz = /bits/ 64 <900000000>; - opp-microvolt = <850000>; - }; - - opp03 { - opp-hz = /bits/ 64 <1080000000>; - opp-microvolt = <900000>; - }; - }; - - clk40m: oscillator@0 { - compatible = "fixed-clock"; - clock-frequency = <40000000>; - #clock-cells = <0>; - clock-output-names = "clkxtal"; - }; - - fan: pwm-fan { - compatible = "pwm-fan"; - /* cooling level (0, 1, 2) : (0% duty, 50% duty, 100% duty) */ - cooling-levels = <0 128 255>; - #cooling-cells = <2>; - #thermal-sensor-cells = <1>; - status = "disabled"; - }; - - pmu { - compatible = "arm,cortex-a73-pmu"; - interrupt-parent = <&gic>; - interrupt = ; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - reg_1p8v: regulator-1p8v { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - reserved-memory { - ranges; - #address-cells = <2>; - #size-cells = <2>; - - /* 320 KiB reserved for ARM Trusted Firmware (BL31 and BL32) */ - secmon_reserved: secmon@43000000 { - reg = <0 0x43000000 0 0x50000>; - no-map; - }; - }; - - soc { - compatible = "simple-bus"; - ranges; - #address-cells = <2>; - #size-cells = <2>; - - gic: interrupt-controller@c000000 { - compatible = "arm,gic-v3"; - reg = <0 0x0c000000 0 0x40000>, /* GICD */ - <0 0x0c080000 0 0x200000>, /* GICR */ - <0 0x0c400000 0 0x2000>, /* GICC */ - <0 0x0c410000 0 0x1000>, /* GICH */ - <0 0x0c420000 0 0x2000>; /* GICV */ - interrupt-parent = <&gic>; - interrupts = ; - interrupt-controller; - #interrupt-cells = <3>; - }; - - phyfw: phy-firmware@f000000 { - compatible = "mediatek,2p5gphy-fw"; - reg = <0 0x0f100000 0 0x20000>, - <0 0x0f0f0018 0 0x20>; - }; - - infracfg: infracfg@10001000 { - compatible = "mediatek,mt7988-infracfg", "syscon"; - reg = <0 0x10001000 0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - topckgen: topckgen@1001b000 { - compatible = "mediatek,mt7988-topckgen", "syscon"; - reg = <0 0x1001b000 0 0x1000>; - #clock-cells = <1>; - }; - - watchdog: watchdog@1001c000 { - compatible = "mediatek,mt7988-wdt", - "mediatek,mt6589-wdt", - "syscon"; - reg = <0 0x1001c000 0 0x1000>; - interrupts = ; - #reset-cells = <1>; - }; - - apmixedsys: apmixedsys@1001e000 { - compatible = "mediatek,mt7988-apmixedsys"; - reg = <0 0x1001e000 0 0x1000>; - #clock-cells = <1>; - }; - - pio: pinctrl@1001f000 { - compatible = "mediatek,mt7988-pinctrl", "syscon"; - reg = <0 0x1001f000 0 0x1000>, - <0 0x11c10000 0 0x1000>, - <0 0x11d00000 0 0x1000>, - <0 0x11d20000 0 0x1000>, - <0 0x11e00000 0 0x1000>, - <0 0x11f00000 0 0x1000>, - <0 0x1000b000 0 0x1000>; - reg-names = "gpio_base", "iocfg_tr_base", - "iocfg_br_base", "iocfg_rb_base", - "iocfg_lb_base", "iocfg_tl_base", "eint"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pio 0 0 84>; - interrupt-controller; - interrupts = ; - interrupt-parent = <&gic>; - #interrupt-cells = <2>; - - mdio0_pins: mdio0-pins { - mux { - function = "eth"; - groups = "mdc_mdio0"; - }; - - conf { - groups = "mdc_mdio0"; - drive-strength = ; - }; - }; - - i2c0_pins: i2c0-pins-g0 { - mux { - function = "i2c"; - groups = "i2c0_1"; - }; - }; - - i2c1_pins: i2c1-pins-g0 { - mux { - function = "i2c"; - groups = "i2c1_0"; - }; - }; - - i2c1_sfp_pins: i2c1-sfp-pins-g0 { - mux { - function = "i2c"; - groups = "i2c1_sfp"; - }; - }; - - i2c2_pins: i2c2-pins { - mux { - function = "i2c"; - groups = "i2c2"; - }; - }; - - i2c2_0_pins: i2c2-pins-g0 { - mux { - function = "i2c"; - groups = "i2c2_0"; - }; - }; - - i2c2_1_pins: i2c2-pins-g1 { - mux { - function = "i2c"; - groups = "i2c2_1"; - }; - }; - - gbe0_led0_pins: gbe0-led0-pins { - mux { - function = "led"; - groups = "gbe0_led0"; - }; - }; - - gbe1_led0_pins: gbe1-led0-pins { - mux { - function = "led"; - groups = "gbe1_led0"; - }; - }; - - gbe2_led0_pins: gbe2-led0-pins { - mux { - function = "led"; - groups = "gbe2_led0"; - }; - }; - - gbe3_led0_pins: gbe3-led0-pins { - mux { - function = "led"; - groups = "gbe3_led0"; - }; - }; - - gbe0_led1_pins: gbe0-led1-pins { - mux { - function = "led"; - groups = "gbe0_led1"; - }; - }; - - gbe1_led1_pins: gbe1-led1-pins { - mux { - function = "led"; - groups = "gbe1_led1"; - }; - }; - - gbe2_led1_pins: gbe2-led1-pins { - mux { - function = "led"; - groups = "gbe2_led1"; - }; - }; - - gbe3_led1_pins: gbe3-led1-pins { - mux { - function = "led"; - groups = "gbe3_led1"; - }; - }; - - i2p5gbe_led0_pins: 2p5gbe-led0-pins { - mux { - function = "led"; - groups = "2p5gbe_led0"; - }; - }; - - i2p5gbe_led1_pins: 2p5gbe-led1-pins { - mux { - function = "led"; - groups = "2p5gbe_led1"; - }; - }; - - mmc0_pins_emmc_45: mmc0-pins-emmc-45 { - mux { - function = "flash"; - groups = "emmc_45"; - }; - }; - - mmc0_pins_emmc_51: mmc0-pins-emmc-51 { - mux { - function = "flash"; - groups = "emmc_51"; - }; - }; - - mmc0_pins_sdcard: mmc0-pins-sdcard { - mux { - function = "flash"; - groups = "sdcard"; - }; - }; - - uart0_pins: uart0-pins { - mux { - function = "uart"; - groups = "uart0"; - }; - }; - - uart1_0_pins: uart1-0-pins { - mux { - function = "uart"; - groups = "uart1_0"; - }; - }; - - uart1_1_pins: uart1-1-pins { - mux { - function = "uart"; - groups = "uart1_1"; - }; - }; - - uart1_2_pins: uart1-2-pins { - mux { - function = "uart"; - groups = "uart1_2"; - }; - }; - - uart1_2_lite_pins: uart1-2-lite-pins { - mux { - function = "uart"; - groups = "uart1_2_lite"; - }; - }; - - uart2_pins: uart2-pins { - mux { - function = "uart"; - groups = "uart2"; - }; - }; - - uart2_0_pins: uart2-0-pins { - mux { - function = "uart"; - groups = "uart2_0"; - }; - }; - - uart2_1_pins: uart2-1-pins { - mux { - function = "uart"; - groups = "uart2_1"; - }; - }; - - uart2_2_pins: uart2-2-pins { - mux { - function = "uart"; - groups = "uart2_2"; - }; - }; - - uart2_3_pins: uart2-3-pins { - mux { - function = "uart"; - groups = "uart2_3"; - }; - }; - - snfi_pins: snfi-pins { - mux { - function = "flash"; - groups = "snfi"; - }; - }; - - spi0_pins: spi0-pins { - mux { - function = "spi"; - groups = "spi0"; - }; - }; - - spi0_flash_pins: spi0-flash-pins { - mux { - function = "spi"; - groups = "spi0", "spi0_wp_hold"; - }; - }; - - spi1_pins: spi1-pins { - mux { - function = "spi"; - groups = "spi1"; - }; - }; - - spi2_pins: spi2-pins { - mux { - function = "spi"; - groups = "spi2"; - }; - }; - - spi2_flash_pins: spi2-flash-pins { - mux { - function = "spi"; - groups = "spi2", "spi2_wp_hold"; - }; - }; - - pcie0_pins: pcie0-pins { - mux { - function = "pcie"; - groups = "pcie_2l_0_pereset", "pcie_clk_req_n0_0", - "pcie_wake_n0_0"; - }; - }; - - pcie1_pins: pcie1-pins { - mux { - function = "pcie"; - groups = "pcie_2l_1_pereset", "pcie_clk_req_n1", - "pcie_wake_n1_0"; - }; - }; - - pcie2_pins: pcie2-pins { - mux { - function = "pcie"; - groups = "pcie_1l_0_pereset", "pcie_clk_req_n2_0", - "pcie_wake_n2_0"; - }; - }; - - pcie3_pins: pcie3-pins { - mux { - function = "pcie"; - groups = "pcie_1l_1_pereset", "pcie_clk_req_n3", - "pcie_wake_n3_0"; - }; - }; - }; - - pwm: pwm@10048000 { - compatible = "mediatek,mt7988-pwm"; - reg = <0 0x10048000 0 0x1000>; - #pwm-cells = <2>; - clocks = <&infracfg CLK_INFRA_66M_PWM_BCK>, - <&infracfg CLK_INFRA_66M_PWM_HCK>, - <&infracfg CLK_INFRA_66M_PWM_CK1>, - <&infracfg CLK_INFRA_66M_PWM_CK2>, - <&infracfg CLK_INFRA_66M_PWM_CK3>, - <&infracfg CLK_INFRA_66M_PWM_CK4>, - <&infracfg CLK_INFRA_66M_PWM_CK5>, - <&infracfg CLK_INFRA_66M_PWM_CK6>, - <&infracfg CLK_INFRA_66M_PWM_CK7>, - <&infracfg CLK_INFRA_66M_PWM_CK8>; - clock-names = "top", "main", "pwm1", "pwm2", "pwm3", - "pwm4","pwm5","pwm6","pwm7","pwm8"; - status = "disabled"; - }; - - sgmiisys0: syscon@10060000 { - compatible = "mediatek,mt7988-sgmiisys", - "mediatek,mt7988-sgmiisys0", - "syscon", - "simple-mfd"; - reg = <0 0x10060000 0 0x1000>; - resets = <&watchdog MT7988_TOPRGU_SGMII0_GRST>; - #clock-cells = <1>; - - sgmiipcs0: pcs { - compatible = "mediatek,mt7988-sgmii"; - clocks = <&topckgen CLK_TOP_SGM_0_SEL>, - <&sgmiisys0 CLK_SGM0_TX_EN>, - <&sgmiisys0 CLK_SGM0_RX_EN>; - clock-names = "sgmii_sel", "sgmii_tx", "sgmii_rx"; - }; - }; - - sgmiisys1: syscon@10070000 { - compatible = "mediatek,mt7988-sgmiisys", - "mediatek,mt7988-sgmiisys1", - "syscon", - "simple-mfd"; - reg = <0 0x10070000 0 0x1000>; - resets = <&watchdog MT7988_TOPRGU_SGMII1_GRST>; - #clock-cells = <1>; - - sgmiipcs1: pcs { - compatible = "mediatek,mt7988-sgmii"; - clocks = <&topckgen CLK_TOP_SGM_1_SEL>, - <&sgmiisys1 CLK_SGM1_TX_EN>, - <&sgmiisys1 CLK_SGM1_RX_EN>; - clock-names = "sgmii_sel", "sgmii_tx", "sgmii_rx"; - }; - }; - - usxgmiisys0: pcs@10080000 { - compatible = "mediatek,mt7988-usxgmiisys"; - reg = <0 0x10080000 0 0x1000>; - resets = <&watchdog MT7988_TOPRGU_XFI0_GRST>; - clocks = <&topckgen CLK_TOP_USXGMII_SBUS_0_SEL>; - }; - - usxgmiisys1: pcs@10081000 { - compatible = "mediatek,mt7988-usxgmiisys"; - reg = <0 0x10081000 0 0x1000>; - resets = <&watchdog MT7988_TOPRGU_XFI1_GRST>; - clocks = <&topckgen CLK_TOP_USXGMII_SBUS_1_SEL>; - }; - - mcusys: mcusys@100e0000 { - compatible = "mediatek,mt7988-mcusys", "syscon"; - reg = <0 0x100e0000 0 0x1000>; - #clock-cells = <1>; - }; - - uart0: serial@11000000 { - compatible = "mediatek,mt7986-uart", - "mediatek,mt6577-uart"; - reg = <0 0x11000000 0 0x100>; - interrupts = ; - /* - * 8250-mtk driver don't control "baud" clock since commit - * e32a83c70cf9 (kernel v5.7), but both "baud" and "bus" clocks - * still need to be passed to the driver to prevent probe fail - */ - clocks = <&topckgen CLK_TOP_UART_SEL>, - <&infracfg CLK_INFRA_52M_UART0_CK>; - clock-names = "baud", "bus"; - assigned-clocks = <&topckgen CLK_TOP_UART_SEL>, - <&infracfg CLK_INFRA_MUX_UART0_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_XTAL>, - <&topckgen CLK_TOP_UART_SEL>; - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "disabled"; - }; - - uart1: serial@11000100 { - compatible = "mediatek,mt7986-uart", - "mediatek,mt6577-uart"; - reg = <0 0x11000100 0 0x100>; - interrupts = ; - /* - * 8250-mtk driver don't control "baud" clock since commit - * e32a83c70cf9 (kernel v5.7), but both "baud" and "bus" clocks - * still need to be passed to the driver to prevent probe fail - */ - clocks = <&topckgen CLK_TOP_UART_SEL>, - <&infracfg CLK_INFRA_52M_UART1_CK>; - clock-names = "baud", "bus"; - assigned-clocks = <&topckgen CLK_TOP_UART_SEL>, - <&infracfg CLK_INFRA_MUX_UART1_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_XTAL>, - <&topckgen CLK_TOP_UART_SEL>; - status = "disabled"; - }; - - uart2: serial@11000200 { - compatible = "mediatek,mt7986-uart", - "mediatek,mt6577-uart"; - reg = <0 0x11000200 0 0x100>; - interrupts = ; - /* - * 8250-mtk driver don't control "baud" clock since commit - * e32a83c70cf9 (kernel v5.7), but both "baud" and "bus" clocks - * still need to be passed to the driver to prevent probe fail - */ - clocks = <&topckgen CLK_TOP_UART_SEL>, - <&infracfg CLK_INFRA_52M_UART2_CK>; - clock-names = "baud", "bus"; - assigned-clocks = <&topckgen CLK_TOP_UART_SEL>, - <&infracfg CLK_INFRA_MUX_UART2_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_XTAL>, - <&topckgen CLK_TOP_UART_SEL>; - status = "disabled"; - }; - - snand: spi@11001000 { - compatible = "mediatek,mt7986-snand"; - reg = <0 0x11001000 0 0x1000>; - interrupts = ; - clocks = <&infracfg CLK_INFRA_SPINFI>, - <&infracfg CLK_INFRA_NFI>; - clock-names = "pad_clk", "nfi_clk"; - assigned-clocks = <&topckgen CLK_TOP_SPINFI_SEL>, - <&topckgen CLK_TOP_NFI1X_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_MPLL_D8>, - <&topckgen CLK_TOP_MPLL_D8>; - nand-ecc-engine = <&bch>; - mediatek,quad-spi; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&snfi_pins>; - status = "disabled"; - }; - - bch: ecc@11002000 { - compatible = "mediatek,mt7686-ecc"; - reg = <0 0x11002000 0 0x1000>; - interrupts = ; - clocks = <&topckgen CLK_TOP_NFI1X_SEL>; - clock-names = "nfiecc_clk"; - status = "disabled"; - }; - - i2c0: i2c@11003000 { - compatible = "mediatek,mt7988-i2c", - "mediatek,mt7981-i2c"; - reg = <0 0x11003000 0 0x1000>, - <0 0x10217080 0 0x80>; - interrupts = ; - clock-div = <1>; - clocks = <&infracfg CLK_INFRA_I2C_BCK>, - <&infracfg CLK_INFRA_66M_AP_DMA_BCK>; - clock-names = "main", "dma"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c1: i2c@11004000 { - compatible = "mediatek,mt7988-i2c", - "mediatek,mt7981-i2c"; - reg = <0 0x11004000 0 0x1000>, - <0 0x10217100 0 0x80>; - interrupts = ; - clock-div = <1>; - clocks = <&infracfg CLK_INFRA_I2C_BCK>, - <&infracfg CLK_INFRA_66M_AP_DMA_BCK>; - clock-names = "main", "dma"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c2: i2c@11005000 { - compatible = "mediatek,mt7988-i2c", - "mediatek,mt7981-i2c"; - reg = <0 0x11005000 0 0x1000>, - <0 0x10217180 0 0x80>; - interrupts = ; - clock-div = <1>; - clocks = <&infracfg CLK_INFRA_I2C_BCK>, - <&infracfg CLK_INFRA_66M_AP_DMA_BCK>; - clock-names = "main", "dma"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi0: spi@11007000 { - compatible = "mediatek,ipm-spi-quad", "mediatek,spi-ipm"; - reg = <0 0x11007000 0 0x100>; - interrupts = ; - clocks = <&topckgen CLK_TOP_MPLL_D2>, - <&topckgen CLK_TOP_SPI_SEL>, - <&infracfg CLK_INFRA_104M_SPI0>, - <&infracfg CLK_INFRA_66M_SPI0_HCK>; - clock-names = "parent-clk", "sel-clk", "spi-clk", - "spi-hclk"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi1: spi@11008000 { - compatible = "mediatek,ipm-spi-single", "mediatek,spi-ipm"; - reg = <0 0x11008000 0 0x100>; - interrupts = ; - clocks = <&topckgen CLK_TOP_MPLL_D2>, - <&topckgen CLK_TOP_SPI_SEL>, - <&infracfg CLK_INFRA_104M_SPI1>, - <&infracfg CLK_INFRA_66M_SPI1_HCK>; - clock-names = "parent-clk", "sel-clk", "spi-clk", - "spi-hclk"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins>; - status = "disabled"; - }; - - spi2: spi@11009000 { - compatible = "mediatek,ipm-spi-quad", "mediatek,spi-ipm"; - reg = <0 0x11009000 0 0x100>; - interrupts = ; - clocks = <&topckgen CLK_TOP_MPLL_D2>, - <&topckgen CLK_TOP_SPI_SEL>, - <&infracfg CLK_INFRA_104M_SPI2_BCK>, - <&infracfg CLK_INFRA_66M_SPI2_HCK>; - clock-names = "parent-clk", "sel-clk", "spi-clk", - "spi-hclk"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - lvts: lvts@1100a000 { - compatible = "mediatek,mt7988-lvts-ap"; - reg = <0 0x1100a000 0 0x1000>; - clocks = <&infracfg CLK_INFRA_26M_THERM_SYSTEM>; - clock-names = "lvts_clk"; - interrupts = ; - resets = <&infracfg MT7988_INFRA_RST1_THERM_CTRL_SWRST>; - nvmem-cells = <&lvts_calibration>; - nvmem-cell-names = "lvts-calib-data-1"; - #thermal-sensor-cells = <1>; - }; - - ssusb0: usb@11190000 { - compatible = "mediatek,mt7988-xhci", - "mediatek,mtk-xhci"; - reg = <0 0x11190000 0 0x2e00>, - <0 0x11193e00 0 0x0100>; - reg-names = "mac", "ippc"; - interrupts = ; - phys = <&xphyu2port0 PHY_TYPE_USB2>, - <&xphyu3port0 PHY_TYPE_USB3>; - clocks = <&infracfg CLK_INFRA_USB_SYS>, - <&infracfg CLK_INFRA_USB_XHCI>, - <&infracfg CLK_INFRA_USB_REF>, - <&infracfg CLK_INFRA_66M_USB_HCK>, - <&infracfg CLK_INFRA_133M_USB_HCK>; - clock-names = "sys_ck", - "xhci_ck", - "ref_ck", - "mcu_ck", - "dma_ck"; - #address-cells = <2>; - #size-cells = <2>; - mediatek,p0_speed_fixup; - status = "disabled"; - }; - - ssusb1: usb@11200000 { - compatible = "mediatek,mt7988-xhci", - "mediatek,mtk-xhci"; - reg = <0 0x11200000 0 0x2e00>, - <0 0x11203e00 0 0x0100>; - reg-names = "mac", "ippc"; - interrupts = ; - phys = <&tphyu2port0 PHY_TYPE_USB2>, - <&tphyu3port0 PHY_TYPE_USB3>; - clocks = <&infracfg CLK_INFRA_USB_SYS_CK_P1>, - <&infracfg CLK_INFRA_USB_XHCI_CK_P1>, - <&infracfg CLK_INFRA_USB_CK_P1>, - <&infracfg CLK_INFRA_66M_USB_HCK_CK_P1>, - <&infracfg CLK_INFRA_133M_USB_HCK_CK_P1>; - clock-names = "sys_ck", - "xhci_ck", - "ref_ck", - "mcu_ck", - "dma_ck"; - #address-cells = <2>; - #size-cells = <2>; - status = "disabled"; - }; - - afe: audio-controller@11210000 { - compatible = "mediatek,mt79xx-audio"; - reg = <0 0x11210000 0 0x9000>; - interrupts = ; - clocks = <&infracfg CLK_INFRA_66M_AUD_SLV_BCK>, - <&infracfg CLK_INFRA_AUD_26M>, - <&infracfg CLK_INFRA_AUD_L>, - <&infracfg CLK_INFRA_AUD_AUD>, - <&infracfg CLK_INFRA_AUD_EG2>, - <&topckgen CLK_TOP_AUD_SEL>, - <&topckgen CLK_TOP_AUD_I2S_M>; - clock-names = "aud_bus_ck", - "aud_26m_ck", - "aud_l_ck", - "aud_aud_ck", - "aud_eg2_ck", - "aud_sel", - "aud_i2s_m"; - assigned-clocks = <&topckgen CLK_TOP_AUD_SEL>, - <&topckgen CLK_TOP_A1SYS_SEL>, - <&topckgen CLK_TOP_AUD_L_SEL>, - <&topckgen CLK_TOP_A_TUNER_SEL>; - assigned-clock-parents = <&apmixedsys CLK_APMIXED_APLL2>, - <&topckgen CLK_TOP_APLL2_D4>, - <&apmixedsys CLK_APMIXED_APLL2>, - <&topckgen CLK_TOP_APLL2_D4>; - status = "disabled"; - }; - - mmc0: mmc@11230000 { - compatible = "mediatek,mt7986-mmc", - "mediatek,mt7981-mmc"; - reg = <0 0x11230000 0 0x1000>, - <0 0x11D60000 0 0x1000>; - interrupts = ; - clocks = <&infracfg CLK_INFRA_MSDC400>, - <&infracfg CLK_INFRA_MSDC2_HCK>, - <&infracfg CLK_INFRA_66M_MSDC_0_HCK>, - <&infracfg CLK_INFRA_133M_MSDC_0_HCK>; - assigned-clocks = <&topckgen CLK_TOP_EMMC_250M_SEL>, - <&topckgen CLK_TOP_EMMC_400M_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_NET1PLL_D5_D2>, - <&apmixedsys CLK_APMIXED_MSDCPLL>; - clock-names = "source", - "hclk", - "axi_cg", - "ahb_cg"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - pcie2: pcie@11280000 { - compatible = "mediatek,mt7988-pcie", - "mediatek,mt7986-pcie", - "mediatek,mt8192-pcie"; - reg = <0 0x11280000 0 0x2000>; - reg-names = "pcie-mac"; - ranges = <0x81000000 0x00 0x20000000 0x00 - 0x20000000 0x00 0x00200000>, - <0x82000000 0x00 0x20200000 0x00 - 0x20200000 0x00 0x07e00000>; - device_type = "pci"; - linux,pci-domain = <3>; - interrupts = ; - bus-range = <0x00 0xff>; - clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P2>, - <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P2>, - <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P2>, - <&infracfg CLK_INFRA_133M_PCIE_CK_P2>, - <&topckgen CLK_TOP_PEXTP_P2_SEL>; - clock-names = "pl_250m", "tl_26m", "peri_26m", - "top_133m", "pextp_clk"; - pinctrl-names = "default"; - pinctrl-0 = <&pcie2_pins>; - phys = <&xphyu3port0 PHY_TYPE_PCIE>; - phy-names = "pcie-phy"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &pcie_intc2 0>, - <0 0 0 2 &pcie_intc2 1>, - <0 0 0 3 &pcie_intc2 2>, - <0 0 0 4 &pcie_intc2 3>; - #address-cells = <3>; - #size-cells = <2>; - status = "disabled"; - - pcie_intc2: interrupt-controller { - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - }; - }; - - pcie3: pcie@11290000 { - compatible = "mediatek,mt7988-pcie", - "mediatek,mt7986-pcie", - "mediatek,mt8192-pcie"; - reg = <0 0x11290000 0 0x2000>; - reg-names = "pcie-mac"; - ranges = <0x81000000 0x00 0x28000000 0x00 - 0x28000000 0x00 0x00200000>, - <0x82000000 0x00 0x28200000 0x00 - 0x28200000 0x00 0x07e00000>; - device_type = "pci"; - linux,pci-domain = <2>; - interrupts = ; - bus-range = <0x00 0xff>; - clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P3>, - <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P3>, - <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P3>, - <&infracfg CLK_INFRA_133M_PCIE_CK_P3>, - <&topckgen CLK_TOP_PEXTP_P3_SEL>; - clock-names = "pl_250m", "tl_26m", "peri_26m", - "top_133m", "pextp_clk"; - pinctrl-names = "default"; - pinctrl-0 = <&pcie3_pins>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &pcie_intc3 0>, - <0 0 0 2 &pcie_intc3 1>, - <0 0 0 3 &pcie_intc3 2>, - <0 0 0 4 &pcie_intc3 3>; - #address-cells = <3>; - #size-cells = <2>; - status = "disabled"; - - pcie_intc3: interrupt-controller { - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - }; - }; - - pcie0: pcie@11300000 { - compatible = "mediatek,mt7988-pcie", - "mediatek,mt7986-pcie", - "mediatek,mt8192-pcie"; - reg = <0 0x11300000 0 0x2000>; - reg-names = "pcie-mac"; - ranges = <0x81000000 0x00 0x30000000 0x00 - 0x30000000 0x00 0x00200000>, - <0x82000000 0x00 0x30200000 0x00 - 0x30200000 0x00 0x07e00000>; - device_type = "pci"; - linux,pci-domain = <0>; - interrupts = ; - bus-range = <0x00 0xff>; - clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P0>, - <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P0>, - <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P0>, - <&infracfg CLK_INFRA_133M_PCIE_CK_P0>, - <&topckgen CLK_TOP_PEXTP_P0_SEL>; - clock-names = "pl_250m", "tl_26m", "peri_26m", - "top_133m", "pextp_clk"; - pinctrl-names = "default"; - pinctrl-0 = <&pcie0_pins>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, - <0 0 0 3 &pcie_intc0 2>, - <0 0 0 4 &pcie_intc0 3>; - #address-cells = <3>; - #size-cells = <2>; - status = "disabled"; - - pcie_intc0: interrupt-controller { - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - }; - }; - - pcie1: pcie@11310000 { - compatible = "mediatek,mt7988-pcie", - "mediatek,mt7986-pcie", - "mediatek,mt8192-pcie"; - reg = <0 0x11310000 0 0x2000>; - reg-names = "pcie-mac"; - ranges = <0x81000000 0x00 0x38000000 0x00 - 0x38000000 0x00 0x00200000>, - <0x82000000 0x00 0x38200000 0x00 - 0x38200000 0x00 0x07e00000>; - device_type = "pci"; - linux,pci-domain = <1>; - interrupts = ; - bus-range = <0x00 0xff>; - clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P1>, - <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P1>, - <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P1>, - <&infracfg CLK_INFRA_133M_PCIE_CK_P1>, - <&topckgen CLK_TOP_PEXTP_P1_SEL>; - clock-names = "pl_250m", "tl_26m", "peri_26m", - "top_133m", "pextp_clk"; - pinctrl-names = "default"; - pinctrl-0 = <&pcie1_pins>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - #address-cells = <3>; - #size-cells = <2>; - status = "disabled"; - - pcie_intc1: interrupt-controller { - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - }; - }; - - tphy: tphy@11c50000 { - compatible = "mediatek,mt7988", - "mediatek,generic-tphy-v2"; - ranges; - #address-cells = <2>; - #size-cells = <2>; - status = "disabled"; - - tphyu2port0: usb-phy@11c50000 { - reg = <0 0x11c50000 0 0x700>; - clocks = <&infracfg CLK_INFRA_USB_UTMI_CK_P1>; - clock-names = "ref"; - #phy-cells = <1>; - }; - - tphyu3port0: usb-phy@11c50700 { - reg = <0 0x11c50700 0 0x900>; - clocks = <&infracfg CLK_INFRA_USB_PIPE_CK_P1>; - clock-names = "ref"; - #phy-cells = <1>; - mediatek,usb3-pll-ssc-delta; - mediatek,usb3-pll-ssc-delta1; - }; - }; - - topmisc: topmisc@11d10000 { - compatible = "mediatek,mt7988-topmisc", "syscon", - "mediatek,mt7988-power-controller"; - reg = <0 0x11d10000 0 0x10000>; - #clock-cells = <1>; - #power-domain-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - }; - - xphy: xphy@11e10000 { - compatible = "mediatek,mt7988", - "mediatek,xsphy"; - ranges; - #address-cells = <2>; - #size-cells = <2>; - status = "disabled"; - - xphyu2port0: usb-phy@11e10000 { - reg = <0 0x11e10000 0 0x400>; - clocks = <&infracfg CLK_INFRA_USB_UTMI>; - clock-names = "ref"; - #phy-cells = <1>; - }; - - xphyu3port0: usb-phy@11e13000 { - reg = <0 0x11e13400 0 0x500>; - clocks = <&infracfg CLK_INFRA_USB_PIPE>; - clock-names = "ref"; - #phy-cells = <1>; - mediatek,syscon-type = <&topmisc 0x218 0>; - }; - }; - - xfi_tphy0: phy@11f20000 { - compatible = "mediatek,mt7988-xfi-tphy"; - reg = <0 0x11f20000 0 0x10000>; - resets = <&watchdog MT7988_TOPRGU_XFI_PEXTP0_GRST>; - clocks = <&xfi_pll CLK_XFIPLL_PLL_EN>, <&topckgen CLK_TOP_XFI_PHY_0_XTAL_SEL>; - clock-names = "xfipll", "topxtal"; - mediatek,usxgmii-performance-errata; - #phy-cells = <0>; - }; - - xfi_tphy1: phy@11f30000 { - compatible = "mediatek,mt7988-xfi-tphy"; - reg = <0 0x11f30000 0 0x10000>; - resets = <&watchdog MT7988_TOPRGU_XFI_PEXTP1_GRST>; - clocks = <&xfi_pll CLK_XFIPLL_PLL_EN>, <&topckgen CLK_TOP_XFI_PHY_1_XTAL_SEL>; - clock-names = "xfipll", "topxtal"; - #phy-cells = <0>; - }; - - xfi_pll: clock-controller@11f40000 { - compatible = "mediatek,mt7988-xfi-pll"; - reg = <0 0x11f40000 0 0x1000>; - resets = <&watchdog MT7988_TOPRGU_XFI_PLL_GRST>; - #clock-cells = <1>; - }; - - efuse: efuse@11f50000 { - compatible = "mediatek,efuse"; - reg = <0 0x11f50000 0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - - lvts_calibration: calib@918 { - reg = <0x918 0x28>; - }; - - phy_calibration_p0: calib@940 { - reg = <0x940 0x10>; - }; - - phy_calibration_p1: calib@954 { - reg = <0x954 0x10>; - }; - - phy_calibration_p2: calib@968 { - reg = <0x968 0x10>; - }; - - phy_calibration_p3: calib@97c { - reg = <0x97c 0x10>; - }; - - cpufreq_calibration: calib@278 { - reg = <0x278 0x1>; - }; - }; - - ethsys: syscon@15000000 { - compatible = "mediatek,mt7988-ethsys", "syscon"; - reg = <0 0x15000000 0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - #address-cells = <1>; - #size-cells = <1>; - }; - - switch: switch@15020000 { - compatible = "mediatek,mt7988-switch"; - reg = <0 0x15020000 0 0x8000>; - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&gic>; - interrupts = ; - resets = <ðwarp MT7988_ETHWARP_RST_SWITCH>; - #address-cells = <1>; - #size-cells = <1>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - gsw_port0: port@0 { - reg = <0>; - label = "lan0"; - phy-mode = "internal"; - phy-handle = <&gsw_phy0>; - }; - - gsw_port1: port@1 { - reg = <1>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&gsw_phy1>; - }; - - gsw_port2: port@2 { - reg = <2>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&gsw_phy2>; - }; - - gsw_port3: port@3 { - reg = <3>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&gsw_phy3>; - }; - - port@6 { - reg = <6>; - ethernet = <&gmac0>; - phy-mode = "internal"; - - fixed-link { - speed = <10000>; - full-duplex; - pause; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - mediatek,pio = <&pio>; - - gsw_phy0: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - phy-mode = "internal"; - nvmem-cells = <&phy_calibration_p0>; - nvmem-cell-names = "phy-cal-data"; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - gsw_phy0_led0: gsw-phy0-led0@0 { - reg = <0>; - function = LED_FUNCTION_LAN; - status = "disabled"; - }; - - gsw_phy0_led1: gsw-phy0-led1@1 { - reg = <1>; - function = LED_FUNCTION_LAN; - status = "disabled"; - }; - }; - }; - - gsw_phy1: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - phy-mode = "internal"; - nvmem-cells = <&phy_calibration_p1>; - nvmem-cell-names = "phy-cal-data"; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - gsw_phy1_led0: gsw-phy1-led0@0 { - reg = <0>; - function = LED_FUNCTION_LAN; - status = "disabled"; - }; - - gsw_phy1_led1: gsw-phy1-led1@1 { - reg = <1>; - function = LED_FUNCTION_LAN; - status = "disabled"; - }; - }; - }; - - gsw_phy2: ethernet-phy@2 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <2>; - phy-mode = "internal"; - nvmem-cells = <&phy_calibration_p2>; - nvmem-cell-names = "phy-cal-data"; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - gsw_phy2_led0: gsw-phy2-led0@0 { - reg = <0>; - function = LED_FUNCTION_LAN; - status = "disabled"; - }; - - gsw_phy2_led1: gsw-phy2-led1@1 { - reg = <1>; - function = LED_FUNCTION_LAN; - status = "disabled"; - }; - }; - }; - - gsw_phy3: ethernet-phy@3 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <3>; - phy-mode = "internal"; - nvmem-cells = <&phy_calibration_p3>; - nvmem-cell-names = "phy-cal-data"; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - gsw_phy3_led0: gsw-phy3-led0@0 { - reg = <0>; - function = LED_FUNCTION_LAN; - status = "disabled"; - }; - - gsw_phy3_led1: gsw-phy3-led1@1 { - reg = <1>; - function = LED_FUNCTION_LAN; - status = "disabled"; - }; - }; - }; - }; - }; - - ethwarp: clock-controller@15031000 { - compatible = "mediatek,mt7988-ethwarp"; - reg = <0 0x15031000 0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - eth: ethernet@15100000 { - compatible = "mediatek,mt7988-eth"; - reg = <0 0x15100000 0 0x80000>, - <0 0x15400000 0 0x380000>; - interrupts = , - , - , - ; - clocks = <ðsys CLK_ETHDMA_XGP1_EN>, - <ðsys CLK_ETHDMA_XGP2_EN>, - <ðsys CLK_ETHDMA_XGP3_EN>, - <ðsys CLK_ETHDMA_FE_EN>, - <ðsys CLK_ETHDMA_GP2_EN>, - <ðsys CLK_ETHDMA_GP1_EN>, - <ðsys CLK_ETHDMA_GP3_EN>, - <ðsys CLK_ETHDMA_ESW_EN>, - <ðsys CLK_ETHDMA_CRYPT0_EN>, - <ðwarp CLK_ETHWARP_WOCPU2_EN>, - <ðwarp CLK_ETHWARP_WOCPU1_EN>, - <ðwarp CLK_ETHWARP_WOCPU0_EN>, - <&topckgen CLK_TOP_ETH_GMII_SEL>, - <&topckgen CLK_TOP_ETH_REFCK_50M_SEL>, - <&topckgen CLK_TOP_ETH_SYS_200M_SEL>, - <&topckgen CLK_TOP_ETH_SYS_SEL>, - <&topckgen CLK_TOP_ETH_XGMII_SEL>, - <&topckgen CLK_TOP_ETH_MII_SEL>, - <&topckgen CLK_TOP_NETSYS_SEL>, - <&topckgen CLK_TOP_NETSYS_500M_SEL>, - <&topckgen CLK_TOP_NETSYS_PAO_2X_SEL>, - <&topckgen CLK_TOP_NETSYS_SYNC_250M_SEL>, - <&topckgen CLK_TOP_NETSYS_PPEFB_250M_SEL>, - <&topckgen CLK_TOP_NETSYS_WARP_SEL>; - clock-names = "xgp1", "xgp2", "xgp3", "fe", "gp2", "gp1", - "gp3", "esw", "crypto", - "ethwarp_wocpu2", "ethwarp_wocpu1", - "ethwarp_wocpu0", "top_eth_gmii_sel", - "top_eth_refck_50m_sel", "top_eth_sys_200m_sel", - "top_eth_sys_sel", "top_eth_xgmii_sel", - "top_eth_mii_sel", "top_netsys_sel", - "top_netsys_500m_sel", "top_netsys_pao_2x_sel", - "top_netsys_sync_250m_sel", - "top_netsys_ppefb_250m_sel", - "top_netsys_warp_sel"; - assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>, - <&topckgen CLK_TOP_NETSYS_GSW_SEL>, - <&topckgen CLK_TOP_USXGMII_SBUS_0_SEL>, - <&topckgen CLK_TOP_USXGMII_SBUS_1_SEL>, - <&topckgen CLK_TOP_SGM_0_SEL>, - <&topckgen CLK_TOP_SGM_1_SEL>; - assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>, - <&topckgen CLK_TOP_NET1PLL_D4>, - <&topckgen CLK_TOP_NET1PLL_D8_D4>, - <&topckgen CLK_TOP_NET1PLL_D8_D4>, - <&apmixedsys CLK_APMIXED_SGMPLL>, - <&apmixedsys CLK_APMIXED_SGMPLL>; - mediatek,ethsys = <ðsys>; - mediatek,infracfg = <&topmisc>; - #address-cells = <1>; - #size-cells = <0>; - - gmac0: mac@0 { - compatible = "mediatek,eth-mac"; - reg = <0>; - phy-mode = "internal"; - status = "disabled"; - - fixed-link { - speed = <10000>; - full-duplex; - pause; - }; - }; - - gmac1: mac@1 { - compatible = "mediatek,eth-mac"; - reg = <1>; - status = "disabled"; - pcs-handle = <&sgmiipcs1>, <&usxgmiisys1>; - phys = <&xfi_tphy1>; - }; - - gmac2: mac@2 { - compatible = "mediatek,eth-mac"; - reg = <2>; - status = "disabled"; - pcs-handle = <&sgmiipcs0>, <&usxgmiisys0>; - phys = <&xfi_tphy0>; - }; - - mdio_bus: mdio-bus { - #address-cells = <1>; - #size-cells = <0>; - - /* internal 2.5G PHY */ - int_2p5g_phy: ethernet-phy@15 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <15>; - phy-mode = "internal"; - }; - }; - }; - - crypto: crypto@15600000 { - compatible = "inside-secure,safexcel-eip197b"; - reg = <0 0x15600000 0 0x180000>; - interrupts = , - , - , - ; - interrupt-names = "ring0", "ring1", "ring2", "ring3"; - status = "okay"; - }; - }; - - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <1000>; - thermal-sensors = <&lvts 0>; - - trips { - cpu_trip_crit: crit { - temperature = <125000>; - hysteresis = <2000>; - type = "critical"; - }; - - cpu_trip_hot: hot { - temperature = <120000>; - hysteresis = <2000>; - type = "hot"; - }; - - cpu_trip_active_high: active-high { - temperature = <115000>; - hysteresis = <2000>; - type = "active"; - }; - - cpu_trip_active_med: active-med { - temperature = <85000>; - hysteresis = <2000>; - type = "active"; - }; - - cpu_trip_active_low: active-low { - temperature = <40000>; - hysteresis = <2000>; - type = "active"; - }; - }; - - cooling-maps { - cpu-active-high { - /* active: set fan to cooling level 2 */ - cooling-device = <&fan 3 3>; - trip = <&cpu_trip_active_high>; - }; - - cpu-active-low { - /* active: set fan to cooling level 1 */ - cooling-device = <&fan 2 2>; - trip = <&cpu_trip_active_med>; - }; - - cpu-passive { - /* passive: set fan to cooling level 0 */ - cooling-device = <&fan 1 1>; - trip = <&cpu_trip_active_low>; - }; - }; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupt-parent = <&gic>; - interrupts = , - , - , - ; - }; -}; diff --git a/target/linux/mediatek/files-6.1/drivers/net/phy/mediatek-2p5ge.c b/target/linux/mediatek/files-6.1/drivers/net/phy/mediatek-2p5ge.c deleted file mode 100644 index e2e06d1ecac..00000000000 --- a/target/linux/mediatek/files-6.1/drivers/net/phy/mediatek-2p5ge.c +++ /dev/null @@ -1,316 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define MT7988_2P5GE_PMB "mediatek/mt7988/i2p5ge-phy-pmb.bin" - -#define MD32_EN BIT(0) -#define PMEM_PRIORITY BIT(8) -#define DMEM_PRIORITY BIT(16) - -#define BASE100T_STATUS_EXTEND 0x10 -#define BASE1000T_STATUS_EXTEND 0x11 -#define EXTEND_CTRL_AND_STATUS 0x16 - -#define PHY_AUX_CTRL_STATUS 0x1d -#define PHY_AUX_DPX_MASK GENMASK(5, 5) -#define PHY_AUX_SPEED_MASK GENMASK(4, 2) - -/* Registers on MDIO_MMD_VEND1 */ -#define MTK_PHY_LINK_STATUS_MISC 0xa2 -#define MTK_PHY_FDX_ENABLE BIT(5) - -#define MTK_PHY_LPI_PCS_DSP_CTRL 0x121 -#define MTK_PHY_LPI_SIG_EN_LO_THRESH100_MASK GENMASK(12, 8) - -/* Registers on MDIO_MMD_VEND2 */ -#define MTK_PHY_LED0_ON_CTRL 0x24 -#define MTK_PHY_LED0_ON_LINK1000 BIT(0) -#define MTK_PHY_LED0_ON_LINK100 BIT(1) -#define MTK_PHY_LED0_ON_LINK10 BIT(2) -#define MTK_PHY_LED0_ON_LINK2500 BIT(7) -#define MTK_PHY_LED0_POLARITY BIT(14) - -#define MTK_PHY_LED1_ON_CTRL 0x26 -#define MTK_PHY_LED1_ON_FDX BIT(4) -#define MTK_PHY_LED1_ON_HDX BIT(5) -#define MTK_PHY_LED1_POLARITY BIT(14) - -#define MTK_EXT_PAGE_ACCESS 0x1f -#define MTK_PHY_PAGE_STANDARD 0x0000 -#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5 - -struct mtk_i2p5ge_phy_priv { - bool fw_loaded; -}; - -enum { - PHY_AUX_SPD_10 = 0, - PHY_AUX_SPD_100, - PHY_AUX_SPD_1000, - PHY_AUX_SPD_2500, -}; - -static int mtk_2p5ge_phy_read_page(struct phy_device *phydev) -{ - return __phy_read(phydev, MTK_EXT_PAGE_ACCESS); -} - -static int mtk_2p5ge_phy_write_page(struct phy_device *phydev, int page) -{ - return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page); -} - -static int mt7988_2p5ge_phy_probe(struct phy_device *phydev) -{ - struct mtk_i2p5ge_phy_priv *phy_priv; - - phy_priv = devm_kzalloc(&phydev->mdio.dev, - sizeof(struct mtk_i2p5ge_phy_priv), GFP_KERNEL); - if (!phy_priv) - return -ENOMEM; - - phydev->priv = phy_priv; - - return 0; -} - -static int mt7988_2p5ge_phy_config_init(struct phy_device *phydev) -{ - int ret, i; - const struct firmware *fw; - struct device *dev = &phydev->mdio.dev; - struct device_node *np; - void __iomem *pmb_addr; - void __iomem *md32_en_cfg_base; - struct mtk_i2p5ge_phy_priv *phy_priv = phydev->priv; - u16 reg; - struct pinctrl *pinctrl; - - if (!phy_priv->fw_loaded) { - np = of_find_compatible_node(NULL, NULL, "mediatek,2p5gphy-fw"); - if (!np) - return -ENOENT; - pmb_addr = of_iomap(np, 0); - if (!pmb_addr) - return -ENOMEM; - md32_en_cfg_base = of_iomap(np, 1); - if (!md32_en_cfg_base) - return -ENOMEM; - - ret = request_firmware(&fw, MT7988_2P5GE_PMB, dev); - if (ret) { - dev_err(dev, "failed to load firmware: %s, ret: %d\n", - MT7988_2P5GE_PMB, ret); - return ret; - } - - reg = readw(md32_en_cfg_base); - if (reg & MD32_EN) { - phy_set_bits(phydev, 0, BIT(15)); - usleep_range(10000, 11000); - } - phy_set_bits(phydev, 0, BIT(11)); - - /* Write magic number to safely stall MCU */ - phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x800e, 0x1100); - phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x800f, 0x00df); - - for (i = 0; i < fw->size - 1; i += 4) - writel(*((uint32_t *)(fw->data + i)), pmb_addr + i); - release_firmware(fw); - - writew(reg & ~MD32_EN, md32_en_cfg_base); - writew(reg | MD32_EN, md32_en_cfg_base); - phy_set_bits(phydev, 0, BIT(15)); - dev_info(dev, "Firmware loading/trigger ok.\n"); - - phy_priv->fw_loaded = true; - } - - /* Setup LED */ - phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL, - MTK_PHY_LED0_ON_LINK10 | - MTK_PHY_LED0_ON_LINK100 | - MTK_PHY_LED0_ON_LINK1000 | - MTK_PHY_LED0_ON_LINK2500); - phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED1_ON_CTRL, - MTK_PHY_LED1_ON_FDX | MTK_PHY_LED1_ON_HDX); - - pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "i2p5gbe-led"); - if (IS_ERR(pinctrl)) { - dev_err(&phydev->mdio.dev, "Fail to set LED pins!\n"); - return PTR_ERR(pinctrl); - } - - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LPI_PCS_DSP_CTRL, - MTK_PHY_LPI_SIG_EN_LO_THRESH100_MASK, 0); - - /* Enable 16-bit next page exchange bit if 1000-BT isn't advertizing */ - phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); - __phy_write(phydev, 0x11, 0xfbfa); - __phy_write(phydev, 0x12, 0xc3); - __phy_write(phydev, 0x10, 0x87f8); - phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); - - return 0; -} - -static int mt7988_2p5ge_phy_config_aneg(struct phy_device *phydev) -{ - bool changed = false; - u32 adv; - int ret; - - if (phydev->autoneg == AUTONEG_DISABLE) { - /* Configure half duplex with genphy_setup_forced, - * because genphy_c45_pma_setup_forced does not support. - */ - return phydev->duplex != DUPLEX_FULL - ? genphy_setup_forced(phydev) - : genphy_c45_pma_setup_forced(phydev); - } - - ret = genphy_c45_an_config_aneg(phydev); - if (ret < 0) - return ret; - if (ret > 0) - changed = true; - - adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising); - ret = phy_modify_changed(phydev, MII_CTRL1000, - ADVERTISE_1000FULL | ADVERTISE_1000HALF, - adv); - if (ret < 0) - return ret; - if (ret > 0) - changed = true; - - return genphy_c45_check_and_restart_aneg(phydev, changed); -} - -static int mt7988_2p5ge_phy_get_features(struct phy_device *phydev) -{ - int ret; - - ret = genphy_read_abilities(phydev); - if (ret) - return ret; - - /* We don't support HDX at MAC layer on mt7988. - * So mask phy's HDX capabilities, too. - */ - linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, - phydev->supported); - linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, - phydev->supported); - linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, - phydev->supported); - linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, - phydev->supported); - linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported); - - return 0; -} - -static int mt7988_2p5ge_phy_read_status(struct phy_device *phydev) -{ - int ret; - - ret = genphy_update_link(phydev); - if (ret) - return ret; - - phydev->speed = SPEED_UNKNOWN; - phydev->duplex = DUPLEX_UNKNOWN; - phydev->pause = 0; - phydev->asym_pause = 0; - - if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) { - ret = genphy_c45_read_lpa(phydev); - if (ret < 0) - return ret; - - /* Read the link partner's 1G advertisement */ - ret = phy_read(phydev, MII_STAT1000); - if (ret < 0) - return ret; - mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, ret); - } else if (phydev->autoneg == AUTONEG_DISABLE) { - linkmode_zero(phydev->lp_advertising); - } - - ret = phy_read(phydev, PHY_AUX_CTRL_STATUS); - if (ret < 0) - return ret; - - switch (FIELD_GET(PHY_AUX_SPEED_MASK, ret)) { - case PHY_AUX_SPD_10: - phydev->speed = SPEED_10; - break; - case PHY_AUX_SPD_100: - phydev->speed = SPEED_100; - break; - case PHY_AUX_SPD_1000: - phydev->speed = SPEED_1000; - break; - case PHY_AUX_SPD_2500: - phydev->speed = SPEED_2500; - break; - } - - ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LINK_STATUS_MISC); - if (ret < 0) - return ret; - - phydev->duplex = (ret & MTK_PHY_FDX_ENABLE) ? DUPLEX_FULL : DUPLEX_HALF; - /* FIXME: The current firmware always enables rate adaptation mode. */ - phydev->rate_matching = RATE_MATCH_PAUSE; - - return 0; -} - -static int mt7988_2p5ge_phy_get_rate_matching(struct phy_device *phydev, - phy_interface_t iface) -{ - return RATE_MATCH_PAUSE; -} - -static struct phy_driver mtk_gephy_driver[] = { - { - PHY_ID_MATCH_MODEL(0x00339c11), - .name = "MediaTek MT798x 2.5GbE PHY", - .probe = mt7988_2p5ge_phy_probe, - .config_init = mt7988_2p5ge_phy_config_init, - .config_aneg = mt7988_2p5ge_phy_config_aneg, - .get_features = mt7988_2p5ge_phy_get_features, - .read_status = mt7988_2p5ge_phy_read_status, - .get_rate_matching = mt7988_2p5ge_phy_get_rate_matching, - .suspend = genphy_suspend, - .resume = genphy_resume, - .read_page = mtk_2p5ge_phy_read_page, - .write_page = mtk_2p5ge_phy_write_page, - }, -}; - -module_phy_driver(mtk_gephy_driver); - -static struct mdio_device_id __maybe_unused mtk_2p5ge_phy_tbl[] = { - { PHY_ID_MATCH_VENDOR(0x00339c00) }, - { } -}; - -MODULE_DESCRIPTION("MediaTek 2.5Gb Ethernet PHY driver"); -MODULE_AUTHOR("SkyLake Huang "); -MODULE_LICENSE("GPL"); - -MODULE_DEVICE_TABLE(mdio, mtk_2p5ge_phy_tbl); -MODULE_FIRMWARE(MT7988_2P5GE_PMB); diff --git a/target/linux/mediatek/files-6.1/drivers/pinctrl/mediatek/pinctrl-mt7988.c b/target/linux/mediatek/files-6.1/drivers/pinctrl/mediatek/pinctrl-mt7988.c deleted file mode 100644 index 9f929112452..00000000000 --- a/target/linux/mediatek/files-6.1/drivers/pinctrl/mediatek/pinctrl-mt7988.c +++ /dev/null @@ -1,1517 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * The MT7988 driver based on Linux generic pinctrl binding. - * - * Copyright (C) 2020 MediaTek Inc. - * Author: Sam Shih - */ - -#include "pinctrl-moore.h" - -enum MT7988_PINCTRL_REG_PAGE { - GPIO_BASE, - IOCFG_TR_BASE, - IOCFG_BR_BASE, - IOCFG_RB_BASE, - IOCFG_LB_BASE, - IOCFG_TL_BASE, -}; - -#define MT7988_PIN(_number, _name) MTK_PIN(_number, _name, 0, _number, DRV_GRP4) - -#define PIN_FIELD_BASE(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, \ - _x_bits) \ - PIN_FIELD_CALC(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, \ - _x_bits, 32, 0) - -#define PINS_FIELD_BASE(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, \ - _x_bits) \ - PIN_FIELD_CALC(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, \ - _x_bits, 32, 1) - -static const struct mtk_pin_field_calc mt7988_pin_mode_range[] = { - PIN_FIELD(0, 83, 0x300, 0x10, 0, 4), -}; - -static const struct mtk_pin_field_calc mt7988_pin_dir_range[] = { - PIN_FIELD(0, 83, 0x0, 0x10, 0, 1), -}; - -static const struct mtk_pin_field_calc mt7988_pin_di_range[] = { - PIN_FIELD(0, 83, 0x200, 0x10, 0, 1), -}; - -static const struct mtk_pin_field_calc mt7988_pin_do_range[] = { - PIN_FIELD(0, 83, 0x100, 0x10, 0, 1), -}; - -static const struct mtk_pin_field_calc mt7988_pin_ies_range[] = { - PIN_FIELD_BASE(0, 0, 5, 0x30, 0x10, 13, 1), - PIN_FIELD_BASE(1, 1, 5, 0x30, 0x10, 14, 1), - PIN_FIELD_BASE(2, 2, 5, 0x30, 0x10, 11, 1), - PIN_FIELD_BASE(3, 3, 5, 0x30, 0x10, 12, 1), - PIN_FIELD_BASE(4, 4, 5, 0x30, 0x10, 0, 1), - PIN_FIELD_BASE(5, 5, 5, 0x30, 0x10, 9, 1), - PIN_FIELD_BASE(6, 6, 5, 0x30, 0x10, 10, 1), - - PIN_FIELD_BASE(7, 7, 4, 0x30, 0x10, 8, 1), - PIN_FIELD_BASE(8, 8, 4, 0x30, 0x10, 6, 1), - PIN_FIELD_BASE(9, 9, 4, 0x30, 0x10, 5, 1), - PIN_FIELD_BASE(10, 10, 4, 0x30, 0x10, 3, 1), - - PIN_FIELD_BASE(11, 11, 1, 0x40, 0x10, 0, 1), - PIN_FIELD_BASE(12, 12, 1, 0x40, 0x10, 21, 1), - PIN_FIELD_BASE(13, 13, 1, 0x40, 0x10, 1, 1), - PIN_FIELD_BASE(14, 14, 1, 0x40, 0x10, 2, 1), - - PIN_FIELD_BASE(15, 15, 5, 0x30, 0x10, 7, 1), - PIN_FIELD_BASE(16, 16, 5, 0x30, 0x10, 8, 1), - PIN_FIELD_BASE(17, 17, 5, 0x30, 0x10, 3, 1), - PIN_FIELD_BASE(18, 18, 5, 0x30, 0x10, 4, 1), - - PIN_FIELD_BASE(19, 19, 4, 0x30, 0x10, 7, 1), - PIN_FIELD_BASE(20, 20, 4, 0x30, 0x10, 4, 1), - - PIN_FIELD_BASE(21, 21, 3, 0x50, 0x10, 17, 1), - PIN_FIELD_BASE(22, 22, 3, 0x50, 0x10, 23, 1), - PIN_FIELD_BASE(23, 23, 3, 0x50, 0x10, 20, 1), - PIN_FIELD_BASE(24, 24, 3, 0x50, 0x10, 19, 1), - PIN_FIELD_BASE(25, 25, 3, 0x50, 0x10, 21, 1), - PIN_FIELD_BASE(26, 26, 3, 0x50, 0x10, 22, 1), - PIN_FIELD_BASE(27, 27, 3, 0x50, 0x10, 18, 1), - PIN_FIELD_BASE(28, 28, 3, 0x50, 0x10, 25, 1), - PIN_FIELD_BASE(29, 29, 3, 0x50, 0x10, 26, 1), - PIN_FIELD_BASE(30, 30, 3, 0x50, 0x10, 27, 1), - PIN_FIELD_BASE(31, 31, 3, 0x50, 0x10, 24, 1), - PIN_FIELD_BASE(32, 32, 3, 0x50, 0x10, 28, 1), - PIN_FIELD_BASE(33, 33, 3, 0x60, 0x10, 0, 1), - PIN_FIELD_BASE(34, 34, 3, 0x50, 0x10, 31, 1), - PIN_FIELD_BASE(35, 35, 3, 0x50, 0x10, 29, 1), - PIN_FIELD_BASE(36, 36, 3, 0x50, 0x10, 30, 1), - PIN_FIELD_BASE(37, 37, 3, 0x60, 0x10, 1, 1), - PIN_FIELD_BASE(38, 38, 3, 0x50, 0x10, 11, 1), - PIN_FIELD_BASE(39, 39, 3, 0x50, 0x10, 10, 1), - PIN_FIELD_BASE(40, 40, 3, 0x50, 0x10, 0, 1), - PIN_FIELD_BASE(41, 41, 3, 0x50, 0x10, 1, 1), - PIN_FIELD_BASE(42, 42, 3, 0x50, 0x10, 9, 1), - PIN_FIELD_BASE(43, 43, 3, 0x50, 0x10, 8, 1), - PIN_FIELD_BASE(44, 44, 3, 0x50, 0x10, 7, 1), - PIN_FIELD_BASE(45, 45, 3, 0x50, 0x10, 6, 1), - PIN_FIELD_BASE(46, 46, 3, 0x50, 0x10, 5, 1), - PIN_FIELD_BASE(47, 47, 3, 0x50, 0x10, 4, 1), - PIN_FIELD_BASE(48, 48, 3, 0x50, 0x10, 3, 1), - PIN_FIELD_BASE(49, 49, 3, 0x50, 0x10, 2, 1), - PIN_FIELD_BASE(50, 50, 3, 0x50, 0x10, 15, 1), - PIN_FIELD_BASE(51, 51, 3, 0x50, 0x10, 12, 1), - PIN_FIELD_BASE(52, 52, 3, 0x50, 0x10, 13, 1), - PIN_FIELD_BASE(53, 53, 3, 0x50, 0x10, 14, 1), - PIN_FIELD_BASE(54, 54, 3, 0x50, 0x10, 16, 1), - - PIN_FIELD_BASE(55, 55, 1, 0x40, 0x10, 14, 1), - PIN_FIELD_BASE(56, 56, 1, 0x40, 0x10, 15, 1), - PIN_FIELD_BASE(57, 57, 1, 0x40, 0x10, 13, 1), - PIN_FIELD_BASE(58, 58, 1, 0x40, 0x10, 4, 1), - PIN_FIELD_BASE(59, 59, 1, 0x40, 0x10, 5, 1), - PIN_FIELD_BASE(60, 60, 1, 0x40, 0x10, 6, 1), - PIN_FIELD_BASE(61, 61, 1, 0x40, 0x10, 3, 1), - PIN_FIELD_BASE(62, 62, 1, 0x40, 0x10, 7, 1), - PIN_FIELD_BASE(63, 63, 1, 0x40, 0x10, 20, 1), - PIN_FIELD_BASE(64, 64, 1, 0x40, 0x10, 8, 1), - PIN_FIELD_BASE(65, 65, 1, 0x40, 0x10, 9, 1), - PIN_FIELD_BASE(66, 66, 1, 0x40, 0x10, 10, 1), - PIN_FIELD_BASE(67, 67, 1, 0x40, 0x10, 11, 1), - PIN_FIELD_BASE(68, 68, 1, 0x40, 0x10, 12, 1), - - PIN_FIELD_BASE(69, 69, 5, 0x30, 0x10, 1, 1), - PIN_FIELD_BASE(70, 70, 5, 0x30, 0x10, 2, 1), - PIN_FIELD_BASE(71, 71, 5, 0x30, 0x10, 5, 1), - PIN_FIELD_BASE(72, 72, 5, 0x30, 0x10, 6, 1), - - PIN_FIELD_BASE(73, 73, 4, 0x30, 0x10, 10, 1), - PIN_FIELD_BASE(74, 74, 4, 0x30, 0x10, 1, 1), - PIN_FIELD_BASE(75, 75, 4, 0x30, 0x10, 11, 1), - PIN_FIELD_BASE(76, 76, 4, 0x30, 0x10, 9, 1), - PIN_FIELD_BASE(77, 77, 4, 0x30, 0x10, 2, 1), - PIN_FIELD_BASE(78, 78, 4, 0x30, 0x10, 0, 1), - PIN_FIELD_BASE(79, 79, 4, 0x30, 0x10, 12, 1), - - PIN_FIELD_BASE(80, 80, 1, 0x40, 0x10, 18, 1), - PIN_FIELD_BASE(81, 81, 1, 0x40, 0x10, 19, 1), - PIN_FIELD_BASE(82, 82, 1, 0x40, 0x10, 16, 1), - PIN_FIELD_BASE(83, 83, 1, 0x40, 0x10, 17, 1), -}; - -static const struct mtk_pin_field_calc mt7988_pin_smt_range[] = { - PIN_FIELD_BASE(0, 0, 5, 0xc0, 0x10, 13, 1), - PIN_FIELD_BASE(1, 1, 5, 0xc0, 0x10, 14, 1), - PIN_FIELD_BASE(2, 2, 5, 0xc0, 0x10, 11, 1), - PIN_FIELD_BASE(3, 3, 5, 0xc0, 0x10, 12, 1), - PIN_FIELD_BASE(4, 4, 5, 0xc0, 0x10, 0, 1), - PIN_FIELD_BASE(5, 5, 5, 0xc0, 0x10, 9, 1), - PIN_FIELD_BASE(6, 6, 5, 0xc0, 0x10, 10, 1), - - PIN_FIELD_BASE(7, 7, 4, 0xb0, 0x10, 8, 1), - PIN_FIELD_BASE(8, 8, 4, 0xb0, 0x10, 6, 1), - PIN_FIELD_BASE(9, 9, 4, 0xb0, 0x10, 5, 1), - PIN_FIELD_BASE(10, 10, 4, 0xb0, 0x10, 3, 1), - - PIN_FIELD_BASE(11, 11, 1, 0xe0, 0x10, 0, 1), - PIN_FIELD_BASE(12, 12, 1, 0xe0, 0x10, 21, 1), - PIN_FIELD_BASE(13, 13, 1, 0xe0, 0x10, 1, 1), - PIN_FIELD_BASE(14, 14, 1, 0xe0, 0x10, 2, 1), - - PIN_FIELD_BASE(15, 15, 5, 0xc0, 0x10, 7, 1), - PIN_FIELD_BASE(16, 16, 5, 0xc0, 0x10, 8, 1), - PIN_FIELD_BASE(17, 17, 5, 0xc0, 0x10, 3, 1), - PIN_FIELD_BASE(18, 18, 5, 0xc0, 0x10, 4, 1), - - PIN_FIELD_BASE(19, 19, 4, 0xb0, 0x10, 7, 1), - PIN_FIELD_BASE(20, 20, 4, 0xb0, 0x10, 4, 1), - - PIN_FIELD_BASE(21, 21, 3, 0x140, 0x10, 17, 1), - PIN_FIELD_BASE(22, 22, 3, 0x140, 0x10, 23, 1), - PIN_FIELD_BASE(23, 23, 3, 0x140, 0x10, 20, 1), - PIN_FIELD_BASE(24, 24, 3, 0x140, 0x10, 19, 1), - PIN_FIELD_BASE(25, 25, 3, 0x140, 0x10, 21, 1), - PIN_FIELD_BASE(26, 26, 3, 0x140, 0x10, 22, 1), - PIN_FIELD_BASE(27, 27, 3, 0x140, 0x10, 18, 1), - PIN_FIELD_BASE(28, 28, 3, 0x140, 0x10, 25, 1), - PIN_FIELD_BASE(29, 29, 3, 0x140, 0x10, 26, 1), - PIN_FIELD_BASE(30, 30, 3, 0x140, 0x10, 27, 1), - PIN_FIELD_BASE(31, 31, 3, 0x140, 0x10, 24, 1), - PIN_FIELD_BASE(32, 32, 3, 0x140, 0x10, 28, 1), - PIN_FIELD_BASE(33, 33, 3, 0x150, 0x10, 0, 1), - PIN_FIELD_BASE(34, 34, 3, 0x140, 0x10, 31, 1), - PIN_FIELD_BASE(35, 35, 3, 0x140, 0x10, 29, 1), - PIN_FIELD_BASE(36, 36, 3, 0x140, 0x10, 30, 1), - PIN_FIELD_BASE(37, 37, 3, 0x150, 0x10, 1, 1), - PIN_FIELD_BASE(38, 38, 3, 0x140, 0x10, 11, 1), - PIN_FIELD_BASE(39, 39, 3, 0x140, 0x10, 10, 1), - PIN_FIELD_BASE(40, 40, 3, 0x140, 0x10, 0, 1), - PIN_FIELD_BASE(41, 41, 3, 0x140, 0x10, 1, 1), - PIN_FIELD_BASE(42, 42, 3, 0x140, 0x10, 9, 1), - PIN_FIELD_BASE(43, 43, 3, 0x140, 0x10, 8, 1), - PIN_FIELD_BASE(44, 44, 3, 0x140, 0x10, 7, 1), - PIN_FIELD_BASE(45, 45, 3, 0x140, 0x10, 6, 1), - PIN_FIELD_BASE(46, 46, 3, 0x140, 0x10, 5, 1), - PIN_FIELD_BASE(47, 47, 3, 0x140, 0x10, 4, 1), - PIN_FIELD_BASE(48, 48, 3, 0x140, 0x10, 3, 1), - PIN_FIELD_BASE(49, 49, 3, 0x140, 0x10, 2, 1), - PIN_FIELD_BASE(50, 50, 3, 0x140, 0x10, 15, 1), - PIN_FIELD_BASE(51, 51, 3, 0x140, 0x10, 12, 1), - PIN_FIELD_BASE(52, 52, 3, 0x140, 0x10, 13, 1), - PIN_FIELD_BASE(53, 53, 3, 0x140, 0x10, 14, 1), - PIN_FIELD_BASE(54, 54, 3, 0x140, 0x10, 16, 1), - - PIN_FIELD_BASE(55, 55, 1, 0xe0, 0x10, 14, 1), - PIN_FIELD_BASE(56, 56, 1, 0xe0, 0x10, 15, 1), - PIN_FIELD_BASE(57, 57, 1, 0xe0, 0x10, 13, 1), - PIN_FIELD_BASE(58, 58, 1, 0xe0, 0x10, 4, 1), - PIN_FIELD_BASE(59, 59, 1, 0xe0, 0x10, 5, 1), - PIN_FIELD_BASE(60, 60, 1, 0xe0, 0x10, 6, 1), - PIN_FIELD_BASE(61, 61, 1, 0xe0, 0x10, 3, 1), - PIN_FIELD_BASE(62, 62, 1, 0xe0, 0x10, 7, 1), - PIN_FIELD_BASE(63, 63, 1, 0xe0, 0x10, 20, 1), - PIN_FIELD_BASE(64, 64, 1, 0xe0, 0x10, 8, 1), - PIN_FIELD_BASE(65, 65, 1, 0xe0, 0x10, 9, 1), - PIN_FIELD_BASE(66, 66, 1, 0xe0, 0x10, 10, 1), - PIN_FIELD_BASE(67, 67, 1, 0xe0, 0x10, 11, 1), - PIN_FIELD_BASE(68, 68, 1, 0xe0, 0x10, 12, 1), - - PIN_FIELD_BASE(69, 69, 5, 0xc0, 0x10, 1, 1), - PIN_FIELD_BASE(70, 70, 5, 0xc0, 0x10, 2, 1), - PIN_FIELD_BASE(71, 71, 5, 0xc0, 0x10, 5, 1), - PIN_FIELD_BASE(72, 72, 5, 0xc0, 0x10, 6, 1), - - PIN_FIELD_BASE(73, 73, 4, 0xb0, 0x10, 10, 1), - PIN_FIELD_BASE(74, 74, 4, 0xb0, 0x10, 1, 1), - PIN_FIELD_BASE(75, 75, 4, 0xb0, 0x10, 11, 1), - PIN_FIELD_BASE(76, 76, 4, 0xb0, 0x10, 9, 1), - PIN_FIELD_BASE(77, 77, 4, 0xb0, 0x10, 2, 1), - PIN_FIELD_BASE(78, 78, 4, 0xb0, 0x10, 0, 1), - PIN_FIELD_BASE(79, 79, 4, 0xb0, 0x10, 12, 1), - - PIN_FIELD_BASE(80, 80, 1, 0xe0, 0x10, 18, 1), - PIN_FIELD_BASE(81, 81, 1, 0xe0, 0x10, 19, 1), - PIN_FIELD_BASE(82, 82, 1, 0xe0, 0x10, 16, 1), - PIN_FIELD_BASE(83, 83, 1, 0xe0, 0x10, 17, 1), -}; - -static const struct mtk_pin_field_calc mt7988_pin_pu_range[] = { - PIN_FIELD_BASE(7, 7, 4, 0x60, 0x10, 5, 1), - PIN_FIELD_BASE(8, 8, 4, 0x60, 0x10, 4, 1), - PIN_FIELD_BASE(9, 9, 4, 0x60, 0x10, 3, 1), - PIN_FIELD_BASE(10, 10, 4, 0x60, 0x10, 2, 1), - - PIN_FIELD_BASE(13, 13, 1, 0x70, 0x10, 0, 1), - PIN_FIELD_BASE(14, 14, 1, 0x70, 0x10, 1, 1), - PIN_FIELD_BASE(63, 63, 1, 0x70, 0x10, 2, 1), - - PIN_FIELD_BASE(75, 75, 4, 0x60, 0x10, 7, 1), - PIN_FIELD_BASE(76, 76, 4, 0x60, 0x10, 6, 1), - PIN_FIELD_BASE(77, 77, 4, 0x60, 0x10, 1, 1), - PIN_FIELD_BASE(78, 78, 4, 0x60, 0x10, 0, 1), - PIN_FIELD_BASE(79, 79, 4, 0x60, 0x10, 8, 1), -}; - -static const struct mtk_pin_field_calc mt7988_pin_pd_range[] = { - PIN_FIELD_BASE(7, 7, 4, 0x40, 0x10, 5, 1), - PIN_FIELD_BASE(8, 8, 4, 0x40, 0x10, 4, 1), - PIN_FIELD_BASE(9, 9, 4, 0x40, 0x10, 3, 1), - PIN_FIELD_BASE(10, 10, 4, 0x40, 0x10, 2, 1), - - PIN_FIELD_BASE(13, 13, 1, 0x50, 0x10, 0, 1), - PIN_FIELD_BASE(14, 14, 1, 0x50, 0x10, 1, 1), - - PIN_FIELD_BASE(15, 15, 5, 0x40, 0x10, 4, 1), - PIN_FIELD_BASE(16, 16, 5, 0x40, 0x10, 5, 1), - PIN_FIELD_BASE(17, 17, 5, 0x40, 0x10, 0, 1), - PIN_FIELD_BASE(18, 18, 5, 0x40, 0x10, 1, 1), - - PIN_FIELD_BASE(63, 63, 1, 0x50, 0x10, 2, 1), - PIN_FIELD_BASE(71, 71, 5, 0x40, 0x10, 2, 1), - PIN_FIELD_BASE(72, 72, 5, 0x40, 0x10, 3, 1), - - PIN_FIELD_BASE(75, 75, 4, 0x40, 0x10, 7, 1), - PIN_FIELD_BASE(76, 76, 4, 0x40, 0x10, 6, 1), - PIN_FIELD_BASE(77, 77, 4, 0x40, 0x10, 1, 1), - PIN_FIELD_BASE(78, 78, 4, 0x40, 0x10, 0, 1), - PIN_FIELD_BASE(79, 79, 4, 0x40, 0x10, 8, 1), -}; - -static const struct mtk_pin_field_calc mt7988_pin_drv_range[] = { - PIN_FIELD_BASE(0, 0, 5, 0x00, 0x10, 21, 3), - PIN_FIELD_BASE(1, 1, 5, 0x00, 0x10, 24, 3), - PIN_FIELD_BASE(2, 2, 5, 0x00, 0x10, 15, 3), - PIN_FIELD_BASE(3, 3, 5, 0x00, 0x10, 18, 3), - PIN_FIELD_BASE(4, 4, 5, 0x00, 0x10, 0, 3), - PIN_FIELD_BASE(5, 5, 5, 0x00, 0x10, 9, 3), - PIN_FIELD_BASE(6, 6, 5, 0x00, 0x10, 12, 3), - - PIN_FIELD_BASE(7, 7, 4, 0x00, 0x10, 24, 3), - PIN_FIELD_BASE(8, 8, 4, 0x00, 0x10, 28, 3), - PIN_FIELD_BASE(9, 9, 4, 0x00, 0x10, 15, 3), - PIN_FIELD_BASE(10, 10, 4, 0x00, 0x10, 9, 3), - - PIN_FIELD_BASE(11, 11, 1, 0x00, 0x10, 0, 3), - PIN_FIELD_BASE(12, 12, 1, 0x20, 0x10, 3, 3), - PIN_FIELD_BASE(13, 13, 1, 0x00, 0x10, 3, 3), - PIN_FIELD_BASE(14, 14, 1, 0x00, 0x10, 6, 3), - - PIN_FIELD_BASE(19, 19, 4, 0x00, 0x10, 21, 3), - PIN_FIELD_BASE(20, 20, 4, 0x00, 0x10, 12, 3), - - PIN_FIELD_BASE(21, 21, 3, 0x10, 0x10, 21, 3), - PIN_FIELD_BASE(22, 22, 3, 0x20, 0x10, 9, 3), - PIN_FIELD_BASE(23, 23, 3, 0x20, 0x10, 0, 3), - PIN_FIELD_BASE(24, 24, 3, 0x10, 0x10, 27, 3), - PIN_FIELD_BASE(25, 25, 3, 0x20, 0x10, 3, 3), - PIN_FIELD_BASE(26, 26, 3, 0x20, 0x10, 6, 3), - PIN_FIELD_BASE(27, 27, 3, 0x10, 0x10, 24, 3), - PIN_FIELD_BASE(28, 28, 3, 0x20, 0x10, 15, 3), - PIN_FIELD_BASE(29, 29, 3, 0x20, 0x10, 18, 3), - PIN_FIELD_BASE(30, 30, 3, 0x20, 0x10, 21, 3), - PIN_FIELD_BASE(31, 31, 3, 0x20, 0x10, 12, 3), - PIN_FIELD_BASE(32, 32, 3, 0x20, 0x10, 24, 3), - PIN_FIELD_BASE(33, 33, 3, 0x30, 0x10, 6, 3), - PIN_FIELD_BASE(34, 34, 3, 0x30, 0x10, 3, 3), - PIN_FIELD_BASE(35, 35, 3, 0x20, 0x10, 27, 3), - PIN_FIELD_BASE(36, 36, 3, 0x30, 0x10, 0, 3), - PIN_FIELD_BASE(37, 37, 3, 0x30, 0x10, 9, 3), - PIN_FIELD_BASE(38, 38, 3, 0x10, 0x10, 3, 3), - PIN_FIELD_BASE(39, 39, 3, 0x10, 0x10, 0, 3), - PIN_FIELD_BASE(40, 40, 3, 0x00, 0x10, 0, 3), - PIN_FIELD_BASE(41, 41, 3, 0x00, 0x10, 3, 3), - PIN_FIELD_BASE(42, 42, 3, 0x00, 0x10, 27, 3), - PIN_FIELD_BASE(43, 43, 3, 0x00, 0x10, 24, 3), - PIN_FIELD_BASE(44, 44, 3, 0x00, 0x10, 21, 3), - PIN_FIELD_BASE(45, 45, 3, 0x00, 0x10, 18, 3), - PIN_FIELD_BASE(46, 46, 3, 0x00, 0x10, 15, 3), - PIN_FIELD_BASE(47, 47, 3, 0x00, 0x10, 12, 3), - PIN_FIELD_BASE(48, 48, 3, 0x00, 0x10, 9, 3), - PIN_FIELD_BASE(49, 49, 3, 0x00, 0x10, 6, 3), - PIN_FIELD_BASE(50, 50, 3, 0x10, 0x10, 15, 3), - PIN_FIELD_BASE(51, 51, 3, 0x10, 0x10, 6, 3), - PIN_FIELD_BASE(52, 52, 3, 0x10, 0x10, 9, 3), - PIN_FIELD_BASE(53, 53, 3, 0x10, 0x10, 12, 3), - PIN_FIELD_BASE(54, 54, 3, 0x10, 0x10, 18, 3), - - PIN_FIELD_BASE(55, 55, 1, 0x10, 0x10, 12, 3), - PIN_FIELD_BASE(56, 56, 1, 0x10, 0x10, 15, 3), - PIN_FIELD_BASE(57, 57, 1, 0x10, 0x10, 9, 3), - PIN_FIELD_BASE(58, 58, 1, 0x00, 0x10, 12, 3), - PIN_FIELD_BASE(59, 59, 1, 0x00, 0x10, 15, 3), - PIN_FIELD_BASE(60, 60, 1, 0x00, 0x10, 18, 3), - PIN_FIELD_BASE(61, 61, 1, 0x00, 0x10, 9, 3), - PIN_FIELD_BASE(62, 62, 1, 0x00, 0x10, 21, 3), - PIN_FIELD_BASE(63, 63, 1, 0x20, 0x10, 0, 3), - PIN_FIELD_BASE(64, 64, 1, 0x00, 0x10, 24, 3), - PIN_FIELD_BASE(65, 65, 1, 0x00, 0x10, 27, 3), - PIN_FIELD_BASE(66, 66, 1, 0x10, 0x10, 0, 3), - PIN_FIELD_BASE(67, 67, 1, 0x10, 0x10, 3, 3), - PIN_FIELD_BASE(68, 68, 1, 0x10, 0x10, 6, 3), - - PIN_FIELD_BASE(69, 69, 5, 0x00, 0x10, 3, 3), - PIN_FIELD_BASE(70, 70, 5, 0x00, 0x10, 6, 3), - - PIN_FIELD_BASE(73, 73, 4, 0x10, 0x10, 0, 3), - PIN_FIELD_BASE(74, 74, 4, 0x00, 0x10, 3, 3), - PIN_FIELD_BASE(75, 75, 4, 0x10, 0x10, 3, 3), - PIN_FIELD_BASE(76, 76, 4, 0x00, 0x10, 27, 3), - PIN_FIELD_BASE(77, 77, 4, 0x00, 0x10, 6, 3), - PIN_FIELD_BASE(78, 78, 4, 0x00, 0x10, 0, 3), - PIN_FIELD_BASE(79, 79, 4, 0x10, 0x10, 6, 3), - - PIN_FIELD_BASE(80, 80, 1, 0x10, 0x10, 24, 3), - PIN_FIELD_BASE(81, 81, 1, 0x10, 0x10, 27, 3), - PIN_FIELD_BASE(82, 82, 1, 0x10, 0x10, 18, 3), - PIN_FIELD_BASE(83, 83, 1, 0x10, 0x10, 21, 3), -}; - -static const struct mtk_pin_field_calc mt7988_pin_pupd_range[] = { - PIN_FIELD_BASE(0, 0, 5, 0x50, 0x10, 7, 1), - PIN_FIELD_BASE(1, 1, 5, 0x50, 0x10, 8, 1), - PIN_FIELD_BASE(2, 2, 5, 0x50, 0x10, 5, 1), - PIN_FIELD_BASE(3, 3, 5, 0x50, 0x10, 6, 1), - PIN_FIELD_BASE(4, 4, 5, 0x50, 0x10, 0, 1), - PIN_FIELD_BASE(5, 5, 5, 0x50, 0x10, 3, 1), - PIN_FIELD_BASE(6, 6, 5, 0x50, 0x10, 4, 1), - - PIN_FIELD_BASE(11, 11, 1, 0x60, 0x10, 0, 1), - PIN_FIELD_BASE(12, 12, 1, 0x60, 0x10, 18, 1), - - PIN_FIELD_BASE(19, 19, 4, 0x50, 0x10, 2, 1), - PIN_FIELD_BASE(20, 20, 4, 0x50, 0x10, 1, 1), - - PIN_FIELD_BASE(21, 21, 3, 0x70, 0x10, 17, 1), - PIN_FIELD_BASE(22, 22, 3, 0x70, 0x10, 23, 1), - PIN_FIELD_BASE(23, 23, 3, 0x70, 0x10, 20, 1), - PIN_FIELD_BASE(24, 24, 3, 0x70, 0x10, 19, 1), - PIN_FIELD_BASE(25, 25, 3, 0x70, 0x10, 21, 1), - PIN_FIELD_BASE(26, 26, 3, 0x70, 0x10, 22, 1), - PIN_FIELD_BASE(27, 27, 3, 0x70, 0x10, 18, 1), - PIN_FIELD_BASE(28, 28, 3, 0x70, 0x10, 25, 1), - PIN_FIELD_BASE(29, 29, 3, 0x70, 0x10, 26, 1), - PIN_FIELD_BASE(30, 30, 3, 0x70, 0x10, 27, 1), - PIN_FIELD_BASE(31, 31, 3, 0x70, 0x10, 24, 1), - PIN_FIELD_BASE(32, 32, 3, 0x70, 0x10, 28, 1), - PIN_FIELD_BASE(33, 33, 3, 0x80, 0x10, 0, 1), - PIN_FIELD_BASE(34, 34, 3, 0x70, 0x10, 31, 1), - PIN_FIELD_BASE(35, 35, 3, 0x70, 0x10, 29, 1), - PIN_FIELD_BASE(36, 36, 3, 0x70, 0x10, 30, 1), - PIN_FIELD_BASE(37, 37, 3, 0x80, 0x10, 1, 1), - PIN_FIELD_BASE(38, 38, 3, 0x70, 0x10, 11, 1), - PIN_FIELD_BASE(39, 39, 3, 0x70, 0x10, 10, 1), - PIN_FIELD_BASE(40, 40, 3, 0x70, 0x10, 0, 1), - PIN_FIELD_BASE(41, 41, 3, 0x70, 0x10, 1, 1), - PIN_FIELD_BASE(42, 42, 3, 0x70, 0x10, 9, 1), - PIN_FIELD_BASE(43, 43, 3, 0x70, 0x10, 8, 1), - PIN_FIELD_BASE(44, 44, 3, 0x70, 0x10, 7, 1), - PIN_FIELD_BASE(45, 45, 3, 0x70, 0x10, 6, 1), - PIN_FIELD_BASE(46, 46, 3, 0x70, 0x10, 5, 1), - PIN_FIELD_BASE(47, 47, 3, 0x70, 0x10, 4, 1), - PIN_FIELD_BASE(48, 48, 3, 0x70, 0x10, 3, 1), - PIN_FIELD_BASE(49, 49, 3, 0x70, 0x10, 2, 1), - PIN_FIELD_BASE(50, 50, 3, 0x70, 0x10, 15, 1), - PIN_FIELD_BASE(51, 51, 3, 0x70, 0x10, 12, 1), - PIN_FIELD_BASE(52, 52, 3, 0x70, 0x10, 13, 1), - PIN_FIELD_BASE(53, 53, 3, 0x70, 0x10, 14, 1), - PIN_FIELD_BASE(54, 54, 3, 0x70, 0x10, 16, 1), - - PIN_FIELD_BASE(55, 55, 1, 0x60, 0x10, 12, 1), - PIN_FIELD_BASE(56, 56, 1, 0x60, 0x10, 13, 1), - PIN_FIELD_BASE(57, 57, 1, 0x60, 0x10, 11, 1), - PIN_FIELD_BASE(58, 58, 1, 0x60, 0x10, 2, 1), - PIN_FIELD_BASE(59, 59, 1, 0x60, 0x10, 3, 1), - PIN_FIELD_BASE(60, 60, 1, 0x60, 0x10, 4, 1), - PIN_FIELD_BASE(61, 61, 1, 0x60, 0x10, 1, 1), - PIN_FIELD_BASE(62, 62, 1, 0x60, 0x10, 5, 1), - PIN_FIELD_BASE(64, 64, 1, 0x60, 0x10, 6, 1), - PIN_FIELD_BASE(65, 65, 1, 0x60, 0x10, 7, 1), - PIN_FIELD_BASE(66, 66, 1, 0x60, 0x10, 8, 1), - PIN_FIELD_BASE(67, 67, 1, 0x60, 0x10, 9, 1), - PIN_FIELD_BASE(68, 68, 1, 0x60, 0x10, 10, 1), - - PIN_FIELD_BASE(69, 69, 5, 0x50, 0x10, 1, 1), - PIN_FIELD_BASE(70, 70, 5, 0x50, 0x10, 2, 1), - - PIN_FIELD_BASE(73, 73, 4, 0x50, 0x10, 3, 1), - PIN_FIELD_BASE(74, 74, 4, 0x50, 0x10, 0, 1), - - PIN_FIELD_BASE(80, 80, 1, 0x60, 0x10, 16, 1), - PIN_FIELD_BASE(81, 81, 1, 0x60, 0x10, 17, 1), - PIN_FIELD_BASE(82, 82, 1, 0x60, 0x10, 14, 1), - PIN_FIELD_BASE(83, 83, 1, 0x60, 0x10, 15, 1), -}; - -static const struct mtk_pin_field_calc mt7988_pin_r0_range[] = { - PIN_FIELD_BASE(0, 0, 5, 0x60, 0x10, 7, 1), - PIN_FIELD_BASE(1, 1, 5, 0x60, 0x10, 8, 1), - PIN_FIELD_BASE(2, 2, 5, 0x60, 0x10, 5, 1), - PIN_FIELD_BASE(3, 3, 5, 0x60, 0x10, 6, 1), - PIN_FIELD_BASE(4, 4, 5, 0x60, 0x10, 0, 1), - PIN_FIELD_BASE(5, 5, 5, 0x60, 0x10, 3, 1), - PIN_FIELD_BASE(6, 6, 5, 0x60, 0x10, 4, 1), - - PIN_FIELD_BASE(11, 11, 1, 0x80, 0x10, 0, 1), - PIN_FIELD_BASE(12, 12, 1, 0x80, 0x10, 18, 1), - - PIN_FIELD_BASE(19, 19, 4, 0x70, 0x10, 2, 1), - PIN_FIELD_BASE(20, 20, 4, 0x70, 0x10, 1, 1), - - PIN_FIELD_BASE(21, 21, 3, 0x90, 0x10, 17, 1), - PIN_FIELD_BASE(22, 22, 3, 0x90, 0x10, 23, 1), - PIN_FIELD_BASE(23, 23, 3, 0x90, 0x10, 20, 1), - PIN_FIELD_BASE(24, 24, 3, 0x90, 0x10, 19, 1), - PIN_FIELD_BASE(25, 25, 3, 0x90, 0x10, 21, 1), - PIN_FIELD_BASE(26, 26, 3, 0x90, 0x10, 22, 1), - PIN_FIELD_BASE(27, 27, 3, 0x90, 0x10, 18, 1), - PIN_FIELD_BASE(28, 28, 3, 0x90, 0x10, 25, 1), - PIN_FIELD_BASE(29, 29, 3, 0x90, 0x10, 26, 1), - PIN_FIELD_BASE(30, 30, 3, 0x90, 0x10, 27, 1), - PIN_FIELD_BASE(31, 31, 3, 0x90, 0x10, 24, 1), - PIN_FIELD_BASE(32, 32, 3, 0x90, 0x10, 28, 1), - PIN_FIELD_BASE(33, 33, 3, 0xa0, 0x10, 0, 1), - PIN_FIELD_BASE(34, 34, 3, 0x90, 0x10, 31, 1), - PIN_FIELD_BASE(35, 35, 3, 0x90, 0x10, 29, 1), - PIN_FIELD_BASE(36, 36, 3, 0x90, 0x10, 30, 1), - PIN_FIELD_BASE(37, 37, 3, 0xa0, 0x10, 1, 1), - PIN_FIELD_BASE(38, 38, 3, 0x90, 0x10, 11, 1), - PIN_FIELD_BASE(39, 39, 3, 0x90, 0x10, 10, 1), - PIN_FIELD_BASE(40, 40, 3, 0x90, 0x10, 0, 1), - PIN_FIELD_BASE(41, 41, 3, 0x90, 0x10, 1, 1), - PIN_FIELD_BASE(42, 42, 3, 0x90, 0x10, 9, 1), - PIN_FIELD_BASE(43, 43, 3, 0x90, 0x10, 8, 1), - PIN_FIELD_BASE(44, 44, 3, 0x90, 0x10, 7, 1), - PIN_FIELD_BASE(45, 45, 3, 0x90, 0x10, 6, 1), - PIN_FIELD_BASE(46, 46, 3, 0x90, 0x10, 5, 1), - PIN_FIELD_BASE(47, 47, 3, 0x90, 0x10, 4, 1), - PIN_FIELD_BASE(48, 48, 3, 0x90, 0x10, 3, 1), - PIN_FIELD_BASE(49, 49, 3, 0x90, 0x10, 2, 1), - PIN_FIELD_BASE(50, 50, 3, 0x90, 0x10, 15, 1), - PIN_FIELD_BASE(51, 51, 3, 0x90, 0x10, 12, 1), - PIN_FIELD_BASE(52, 52, 3, 0x90, 0x10, 13, 1), - PIN_FIELD_BASE(53, 53, 3, 0x90, 0x10, 14, 1), - PIN_FIELD_BASE(54, 54, 3, 0x90, 0x10, 16, 1), - - PIN_FIELD_BASE(55, 55, 1, 0x80, 0x10, 12, 1), - PIN_FIELD_BASE(56, 56, 1, 0x80, 0x10, 13, 1), - PIN_FIELD_BASE(57, 57, 1, 0x80, 0x10, 11, 1), - PIN_FIELD_BASE(58, 58, 1, 0x80, 0x10, 2, 1), - PIN_FIELD_BASE(59, 59, 1, 0x80, 0x10, 3, 1), - PIN_FIELD_BASE(60, 60, 1, 0x80, 0x10, 4, 1), - PIN_FIELD_BASE(61, 61, 1, 0x80, 0x10, 1, 1), - PIN_FIELD_BASE(62, 62, 1, 0x80, 0x10, 5, 1), - PIN_FIELD_BASE(64, 64, 1, 0x80, 0x10, 6, 1), - PIN_FIELD_BASE(65, 65, 1, 0x80, 0x10, 7, 1), - PIN_FIELD_BASE(66, 66, 1, 0x80, 0x10, 8, 1), - PIN_FIELD_BASE(67, 67, 1, 0x80, 0x10, 9, 1), - PIN_FIELD_BASE(68, 68, 1, 0x80, 0x10, 10, 1), - - PIN_FIELD_BASE(69, 69, 5, 0x60, 0x10, 1, 1), - PIN_FIELD_BASE(70, 70, 5, 0x60, 0x10, 2, 1), - - PIN_FIELD_BASE(73, 73, 4, 0x70, 0x10, 3, 1), - PIN_FIELD_BASE(74, 74, 4, 0x70, 0x10, 0, 1), - - PIN_FIELD_BASE(80, 80, 1, 0x80, 0x10, 16, 1), - PIN_FIELD_BASE(81, 81, 1, 0x80, 0x10, 17, 1), - PIN_FIELD_BASE(82, 82, 1, 0x80, 0x10, 14, 1), - PIN_FIELD_BASE(83, 83, 1, 0x80, 0x10, 15, 1), -}; - -static const struct mtk_pin_field_calc mt7988_pin_r1_range[] = { - PIN_FIELD_BASE(0, 0, 5, 0x70, 0x10, 7, 1), - PIN_FIELD_BASE(1, 1, 5, 0x70, 0x10, 8, 1), - PIN_FIELD_BASE(2, 2, 5, 0x70, 0x10, 5, 1), - PIN_FIELD_BASE(3, 3, 5, 0x70, 0x10, 6, 1), - PIN_FIELD_BASE(4, 4, 5, 0x70, 0x10, 0, 1), - PIN_FIELD_BASE(5, 5, 5, 0x70, 0x10, 3, 1), - PIN_FIELD_BASE(6, 6, 5, 0x70, 0x10, 4, 1), - - PIN_FIELD_BASE(11, 11, 1, 0x90, 0x10, 0, 1), - PIN_FIELD_BASE(12, 12, 1, 0x90, 0x10, 18, 1), - - PIN_FIELD_BASE(19, 19, 4, 0x80, 0x10, 2, 1), - PIN_FIELD_BASE(20, 20, 4, 0x80, 0x10, 1, 1), - - PIN_FIELD_BASE(21, 21, 3, 0xb0, 0x10, 17, 1), - PIN_FIELD_BASE(22, 22, 3, 0xb0, 0x10, 23, 1), - PIN_FIELD_BASE(23, 23, 3, 0xb0, 0x10, 20, 1), - PIN_FIELD_BASE(24, 24, 3, 0xb0, 0x10, 19, 1), - PIN_FIELD_BASE(25, 25, 3, 0xb0, 0x10, 21, 1), - PIN_FIELD_BASE(26, 26, 3, 0xb0, 0x10, 22, 1), - PIN_FIELD_BASE(27, 27, 3, 0xb0, 0x10, 18, 1), - PIN_FIELD_BASE(28, 28, 3, 0xb0, 0x10, 25, 1), - PIN_FIELD_BASE(29, 29, 3, 0xb0, 0x10, 26, 1), - PIN_FIELD_BASE(30, 30, 3, 0xb0, 0x10, 27, 1), - PIN_FIELD_BASE(31, 31, 3, 0xb0, 0x10, 24, 1), - PIN_FIELD_BASE(32, 32, 3, 0xb0, 0x10, 28, 1), - PIN_FIELD_BASE(33, 33, 3, 0xc0, 0x10, 0, 1), - PIN_FIELD_BASE(34, 34, 3, 0xb0, 0x10, 31, 1), - PIN_FIELD_BASE(35, 35, 3, 0xb0, 0x10, 29, 1), - PIN_FIELD_BASE(36, 36, 3, 0xb0, 0x10, 30, 1), - PIN_FIELD_BASE(37, 37, 3, 0xc0, 0x10, 1, 1), - PIN_FIELD_BASE(38, 38, 3, 0xb0, 0x10, 11, 1), - PIN_FIELD_BASE(39, 39, 3, 0xb0, 0x10, 10, 1), - PIN_FIELD_BASE(40, 40, 3, 0xb0, 0x10, 0, 1), - PIN_FIELD_BASE(41, 41, 3, 0xb0, 0x10, 1, 1), - PIN_FIELD_BASE(42, 42, 3, 0xb0, 0x10, 9, 1), - PIN_FIELD_BASE(43, 43, 3, 0xb0, 0x10, 8, 1), - PIN_FIELD_BASE(44, 44, 3, 0xb0, 0x10, 7, 1), - PIN_FIELD_BASE(45, 45, 3, 0xb0, 0x10, 6, 1), - PIN_FIELD_BASE(46, 46, 3, 0xb0, 0x10, 5, 1), - PIN_FIELD_BASE(47, 47, 3, 0xb0, 0x10, 4, 1), - PIN_FIELD_BASE(48, 48, 3, 0xb0, 0x10, 3, 1), - PIN_FIELD_BASE(49, 49, 3, 0xb0, 0x10, 2, 1), - PIN_FIELD_BASE(50, 50, 3, 0xb0, 0x10, 15, 1), - PIN_FIELD_BASE(51, 51, 3, 0xb0, 0x10, 12, 1), - PIN_FIELD_BASE(52, 52, 3, 0xb0, 0x10, 13, 1), - PIN_FIELD_BASE(53, 53, 3, 0xb0, 0x10, 14, 1), - PIN_FIELD_BASE(54, 54, 3, 0xb0, 0x10, 16, 1), - - PIN_FIELD_BASE(55, 55, 1, 0x90, 0x10, 12, 1), - PIN_FIELD_BASE(56, 56, 1, 0x90, 0x10, 13, 1), - PIN_FIELD_BASE(57, 57, 1, 0x90, 0x10, 11, 1), - PIN_FIELD_BASE(58, 58, 1, 0x90, 0x10, 2, 1), - PIN_FIELD_BASE(59, 59, 1, 0x90, 0x10, 3, 1), - PIN_FIELD_BASE(60, 60, 1, 0x90, 0x10, 4, 1), - PIN_FIELD_BASE(61, 61, 1, 0x90, 0x10, 1, 1), - PIN_FIELD_BASE(62, 62, 1, 0x90, 0x10, 5, 1), - PIN_FIELD_BASE(64, 64, 1, 0x90, 0x10, 6, 1), - PIN_FIELD_BASE(65, 65, 1, 0x90, 0x10, 7, 1), - PIN_FIELD_BASE(66, 66, 1, 0x90, 0x10, 8, 1), - PIN_FIELD_BASE(67, 67, 1, 0x90, 0x10, 9, 1), - PIN_FIELD_BASE(68, 68, 1, 0x90, 0x10, 10, 1), - - PIN_FIELD_BASE(69, 69, 5, 0x70, 0x10, 1, 1), - PIN_FIELD_BASE(70, 70, 5, 0x70, 0x10, 2, 1), - - PIN_FIELD_BASE(73, 73, 4, 0x80, 0x10, 3, 1), - PIN_FIELD_BASE(74, 74, 4, 0x80, 0x10, 0, 1), - - PIN_FIELD_BASE(80, 80, 1, 0x90, 0x10, 16, 1), - PIN_FIELD_BASE(81, 81, 1, 0x90, 0x10, 17, 1), - PIN_FIELD_BASE(82, 82, 1, 0x90, 0x10, 14, 1), - PIN_FIELD_BASE(83, 83, 1, 0x90, 0x10, 15, 1), -}; - -static const unsigned int mt7988_pull_type[] = { - MTK_PULL_PUPD_R1R0_TYPE,/*0*/ MTK_PULL_PUPD_R1R0_TYPE,/*1*/ - MTK_PULL_PUPD_R1R0_TYPE,/*2*/ MTK_PULL_PUPD_R1R0_TYPE,/*3*/ - MTK_PULL_PUPD_R1R0_TYPE,/*4*/ MTK_PULL_PUPD_R1R0_TYPE,/*5*/ - MTK_PULL_PUPD_R1R0_TYPE,/*6*/ MTK_PULL_PU_PD_TYPE, /*7*/ - MTK_PULL_PU_PD_TYPE, /*8*/ MTK_PULL_PU_PD_TYPE, /*9*/ - MTK_PULL_PU_PD_TYPE, /*10*/ MTK_PULL_PUPD_R1R0_TYPE,/*11*/ - MTK_PULL_PUPD_R1R0_TYPE,/*12*/ MTK_PULL_PU_PD_TYPE, /*13*/ - MTK_PULL_PU_PD_TYPE, /*14*/ MTK_PULL_PD_TYPE, /*15*/ - MTK_PULL_PD_TYPE, /*16*/ MTK_PULL_PD_TYPE, /*17*/ - MTK_PULL_PD_TYPE, /*18*/ MTK_PULL_PUPD_R1R0_TYPE,/*19*/ - MTK_PULL_PUPD_R1R0_TYPE,/*20*/ MTK_PULL_PUPD_R1R0_TYPE,/*21*/ - MTK_PULL_PUPD_R1R0_TYPE,/*22*/ MTK_PULL_PUPD_R1R0_TYPE,/*23*/ - MTK_PULL_PUPD_R1R0_TYPE,/*24*/ MTK_PULL_PUPD_R1R0_TYPE,/*25*/ - MTK_PULL_PUPD_R1R0_TYPE,/*26*/ MTK_PULL_PUPD_R1R0_TYPE,/*27*/ - MTK_PULL_PUPD_R1R0_TYPE,/*28*/ MTK_PULL_PUPD_R1R0_TYPE,/*29*/ - MTK_PULL_PUPD_R1R0_TYPE,/*30*/ MTK_PULL_PUPD_R1R0_TYPE,/*31*/ - MTK_PULL_PUPD_R1R0_TYPE,/*32*/ MTK_PULL_PUPD_R1R0_TYPE,/*33*/ - MTK_PULL_PUPD_R1R0_TYPE,/*34*/ MTK_PULL_PUPD_R1R0_TYPE,/*35*/ - MTK_PULL_PUPD_R1R0_TYPE,/*36*/ MTK_PULL_PUPD_R1R0_TYPE,/*37*/ - MTK_PULL_PUPD_R1R0_TYPE,/*38*/ MTK_PULL_PUPD_R1R0_TYPE,/*39*/ - MTK_PULL_PUPD_R1R0_TYPE,/*40*/ MTK_PULL_PUPD_R1R0_TYPE,/*41*/ - MTK_PULL_PUPD_R1R0_TYPE,/*42*/ MTK_PULL_PUPD_R1R0_TYPE,/*43*/ - MTK_PULL_PUPD_R1R0_TYPE,/*44*/ MTK_PULL_PUPD_R1R0_TYPE,/*45*/ - MTK_PULL_PUPD_R1R0_TYPE,/*46*/ MTK_PULL_PUPD_R1R0_TYPE,/*47*/ - MTK_PULL_PUPD_R1R0_TYPE,/*48*/ MTK_PULL_PUPD_R1R0_TYPE,/*49*/ - MTK_PULL_PUPD_R1R0_TYPE,/*50*/ MTK_PULL_PUPD_R1R0_TYPE,/*51*/ - MTK_PULL_PUPD_R1R0_TYPE,/*52*/ MTK_PULL_PUPD_R1R0_TYPE,/*53*/ - MTK_PULL_PUPD_R1R0_TYPE,/*54*/ MTK_PULL_PUPD_R1R0_TYPE,/*55*/ - MTK_PULL_PUPD_R1R0_TYPE,/*56*/ MTK_PULL_PUPD_R1R0_TYPE,/*57*/ - MTK_PULL_PUPD_R1R0_TYPE,/*58*/ MTK_PULL_PUPD_R1R0_TYPE,/*59*/ - MTK_PULL_PUPD_R1R0_TYPE,/*60*/ MTK_PULL_PUPD_R1R0_TYPE,/*61*/ - MTK_PULL_PUPD_R1R0_TYPE,/*62*/ MTK_PULL_PU_PD_TYPE, /*63*/ - MTK_PULL_PUPD_R1R0_TYPE,/*64*/ MTK_PULL_PUPD_R1R0_TYPE,/*65*/ - MTK_PULL_PUPD_R1R0_TYPE,/*66*/ MTK_PULL_PUPD_R1R0_TYPE,/*67*/ - MTK_PULL_PUPD_R1R0_TYPE,/*68*/ MTK_PULL_PUPD_R1R0_TYPE,/*69*/ - MTK_PULL_PUPD_R1R0_TYPE,/*70*/ MTK_PULL_PD_TYPE, /*71*/ - MTK_PULL_PD_TYPE, /*72*/ MTK_PULL_PUPD_R1R0_TYPE,/*73*/ - MTK_PULL_PUPD_R1R0_TYPE,/*74*/ MTK_PULL_PU_PD_TYPE, /*75*/ - MTK_PULL_PU_PD_TYPE, /*76*/ MTK_PULL_PU_PD_TYPE, /*77*/ - MTK_PULL_PU_PD_TYPE, /*78*/ MTK_PULL_PU_PD_TYPE, /*79*/ - MTK_PULL_PUPD_R1R0_TYPE,/*80*/ MTK_PULL_PUPD_R1R0_TYPE,/*81*/ - MTK_PULL_PUPD_R1R0_TYPE,/*82*/ MTK_PULL_PUPD_R1R0_TYPE,/*83*/ -}; - -static const struct mtk_pin_reg_calc mt7988_reg_cals[] = { - [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt7988_pin_mode_range), - [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt7988_pin_dir_range), - [PINCTRL_PIN_REG_DI] = MTK_RANGE(mt7988_pin_di_range), - [PINCTRL_PIN_REG_DO] = MTK_RANGE(mt7988_pin_do_range), - [PINCTRL_PIN_REG_SMT] = MTK_RANGE(mt7988_pin_smt_range), - [PINCTRL_PIN_REG_IES] = MTK_RANGE(mt7988_pin_ies_range), - [PINCTRL_PIN_REG_PU] = MTK_RANGE(mt7988_pin_pu_range), - [PINCTRL_PIN_REG_PD] = MTK_RANGE(mt7988_pin_pd_range), - [PINCTRL_PIN_REG_DRV] = MTK_RANGE(mt7988_pin_drv_range), - [PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt7988_pin_pupd_range), - [PINCTRL_PIN_REG_R0] = MTK_RANGE(mt7988_pin_r0_range), - [PINCTRL_PIN_REG_R1] = MTK_RANGE(mt7988_pin_r1_range), -}; - -static const struct mtk_pin_desc mt7988_pins[] = { - MT7988_PIN(0, "UART2_RXD"), - MT7988_PIN(1, "UART2_TXD"), - MT7988_PIN(2, "UART2_CTS"), - MT7988_PIN(3, "UART2_RTS"), - MT7988_PIN(4, "GPIO_A"), - MT7988_PIN(5, "SMI_0_MDC"), - MT7988_PIN(6, "SMI_0_MDIO"), - MT7988_PIN(7, "PCIE30_2L_0_WAKE_N"), - MT7988_PIN(8, "PCIE30_2L_0_CLKREQ_N"), - MT7988_PIN(9, "PCIE30_1L_1_WAKE_N"), - MT7988_PIN(10, "PCIE30_1L_1_CLKREQ_N"), - MT7988_PIN(11, "GPIO_P"), - MT7988_PIN(12, "WATCHDOG"), - MT7988_PIN(13, "GPIO_RESET"), - MT7988_PIN(14, "GPIO_WPS"), - MT7988_PIN(15, "PMIC_I2C_SCL"), - MT7988_PIN(16, "PMIC_I2C_SDA"), - MT7988_PIN(17, "I2C_1_SCL"), - MT7988_PIN(18, "I2C_1_SDA"), - MT7988_PIN(19, "PCIE30_2L_0_PRESET_N"), - MT7988_PIN(20, "PCIE30_1L_1_PRESET_N"), - MT7988_PIN(21, "PWMD1"), - MT7988_PIN(22, "SPI0_WP"), - MT7988_PIN(23, "SPI0_HOLD"), - MT7988_PIN(24, "SPI0_CSB"), - MT7988_PIN(25, "SPI0_MISO"), - MT7988_PIN(26, "SPI0_MOSI"), - MT7988_PIN(27, "SPI0_CLK"), - MT7988_PIN(28, "SPI1_CSB"), - MT7988_PIN(29, "SPI1_MISO"), - MT7988_PIN(30, "SPI1_MOSI"), - MT7988_PIN(31, "SPI1_CLK"), - MT7988_PIN(32, "SPI2_CLK"), - MT7988_PIN(33, "SPI2_MOSI"), - MT7988_PIN(34, "SPI2_MISO"), - MT7988_PIN(35, "SPI2_CSB"), - MT7988_PIN(36, "SPI2_HOLD"), - MT7988_PIN(37, "SPI2_WP"), - MT7988_PIN(38, "EMMC_RSTB"), - MT7988_PIN(39, "EMMC_DSL"), - MT7988_PIN(40, "EMMC_CK"), - MT7988_PIN(41, "EMMC_CMD"), - MT7988_PIN(42, "EMMC_DATA_7"), - MT7988_PIN(43, "EMMC_DATA_6"), - MT7988_PIN(44, "EMMC_DATA_5"), - MT7988_PIN(45, "EMMC_DATA_4"), - MT7988_PIN(46, "EMMC_DATA_3"), - MT7988_PIN(47, "EMMC_DATA_2"), - MT7988_PIN(48, "EMMC_DATA_1"), - MT7988_PIN(49, "EMMC_DATA_0"), - MT7988_PIN(50, "PCM_FS_I2S_LRCK"), - MT7988_PIN(51, "PCM_CLK_I2S_BCLK"), - MT7988_PIN(52, "PCM_DRX_I2S_DIN"), - MT7988_PIN(53, "PCM_DTX_I2S_DOUT"), - MT7988_PIN(54, "PCM_MCK_I2S_MCLK"), - MT7988_PIN(55, "UART0_RXD"), - MT7988_PIN(56, "UART0_TXD"), - MT7988_PIN(57, "PWMD0"), - MT7988_PIN(58, "JTAG_JTDI"), - MT7988_PIN(59, "JTAG_JTDO"), - MT7988_PIN(60, "JTAG_JTMS"), - MT7988_PIN(61, "JTAG_JTCLK"), - MT7988_PIN(62, "JTAG_JTRST_N"), - MT7988_PIN(63, "USB_DRV_VBUS_P1"), - MT7988_PIN(64, "LED_A"), - MT7988_PIN(65, "LED_B"), - MT7988_PIN(66, "LED_C"), - MT7988_PIN(67, "LED_D"), - MT7988_PIN(68, "LED_E"), - MT7988_PIN(69, "GPIO_B"), - MT7988_PIN(70, "GPIO_C"), - MT7988_PIN(71, "I2C_2_SCL"), - MT7988_PIN(72, "I2C_2_SDA"), - MT7988_PIN(73, "PCIE30_2L_1_PRESET_N"), - MT7988_PIN(74, "PCIE30_1L_0_PRESET_N"), - MT7988_PIN(75, "PCIE30_2L_1_WAKE_N"), - MT7988_PIN(76, "PCIE30_2L_1_CLKREQ_N"), - MT7988_PIN(77, "PCIE30_1L_0_WAKE_N"), - MT7988_PIN(78, "PCIE30_1L_0_CLKREQ_N"), - MT7988_PIN(79, "USB_DRV_VBUS_P0"), - MT7988_PIN(80, "UART1_RXD"), - MT7988_PIN(81, "UART1_TXD"), - MT7988_PIN(82, "UART1_CTS"), - MT7988_PIN(83, "UART1_RTS"), -}; - -/* jtag */ -static int mt7988_tops_jtag0_0_pins[] = { 0, 1, 2, 3, 4 }; -static int mt7988_tops_jtag0_0_funcs[] = { 2, 2, 2, 2, 2 }; - -static int mt7988_wo0_jtag_pins[] = { 50, 51, 52, 53, 54 }; -static int mt7988_wo0_jtag_funcs[] = { 3, 3, 3, 3, 3 }; - -static int mt7988_wo1_jtag_pins[] = { 50, 51, 52, 53, 54 }; -static int mt7988_wo1_jtag_funcs[] = { 4, 4, 4, 4, 4 }; - -static int mt7988_wo2_jtag_pins[] = { 50, 51, 52, 53, 54 }; -static int mt7988_wo2_jtag_funcs[] = { 5, 5, 5, 5, 5 }; - -static int mt7988_jtag_pins[] = { 58, 59, 60, 61, 62 }; -static int mt7988_jtag_funcs[] = { 1, 1, 1, 1, 1 }; - -static int mt7988_tops_jtag0_1_pins[] = { 58, 59, 60, 61, 62 }; -static int mt7988_tops_jtag0_1_funcs[] = { 4, 4, 4, 4, 4 }; - -/* int_usxgmii */ -static int mt7988_int_usxgmii_pins[] = { 2, 3 }; -static int mt7988_int_usxgmii_funcs[] = { 3, 3 }; - -/* pwm */ -static int mt7988_pwm0_pins[] = { 57 }; -static int mt7988_pwm0_funcs[] = { 1 }; - -static int mt7988_pwm1_pins[] = { 21 }; -static int mt7988_pwm1_funcs[] = { 1 }; - -static int mt7988_pwm2_pins[] = { 80 }; -static int mt7988_pwm2_funcs[] = { 2 }; - -static int mt7988_pwm3_pins[] = { 81 }; -static int mt7988_pwm3_funcs[] = { 2 }; - -static int mt7988_pwm4_pins[] = { 82 }; -static int mt7988_pwm4_funcs[] = { 2 }; - -static int mt7988_pwm5_pins[] = { 83 }; -static int mt7988_pwm5_funcs[] = { 2 }; - -static int mt7988_pwm6_pins[] = { 69 }; -static int mt7988_pwm6_funcs[] = { 3 }; - -static int mt7988_pwm7_pins[] = { 70 }; -static int mt7988_pwm7_funcs[] = { 3 }; - -/* dfd */ -static int mt7988_dfd_pins[] = { 0, 1, 2, 3, 4 }; -static int mt7988_dfd_funcs[] = { 4, 4, 4, 4, 4 }; - -/* i2c */ -static int mt7988_xfi_phy0_i2c0_pins[] = { 0, 1 }; -static int mt7988_xfi_phy0_i2c0_funcs[] = { 5, 5 }; - -static int mt7988_xfi_phy1_i2c0_pins[] = { 0, 1 }; -static int mt7988_xfi_phy1_i2c0_funcs[] = { 6, 6 }; - -static int mt7988_xfi_phy_pll_i2c0_pins[] = { 3, 4 }; -static int mt7988_xfi_phy_pll_i2c0_funcs[] = { 5, 5 }; - -static int mt7988_xfi_phy_pll_i2c1_pins[] = { 3, 4 }; -static int mt7988_xfi_phy_pll_i2c1_funcs[] = { 6, 6 }; - -static int mt7988_i2c0_0_pins[] = { 5, 6 }; -static int mt7988_i2c0_0_funcs[] = { 2, 2 }; - -static int mt7988_i2c1_sfp_pins[] = { 5, 6 }; -static int mt7988_i2c1_sfp_funcs[] = { 4, 4 }; - -static int mt7988_xfi_pextp_phy0_i2c_pins[] = { 5, 6 }; -static int mt7988_xfi_pextp_phy0_i2c_funcs[] = { 5, 5 }; - -static int mt7988_xfi_pextp_phy1_i2c_pins[] = { 5, 6 }; -static int mt7988_xfi_pextp_phy1_i2c_funcs[] = { 6, 6 }; - -static int mt7988_i2c0_1_pins[] = { 15, 16 }; -static int mt7988_i2c0_1_funcs[] = { 1, 1 }; - -static int mt7988_u30_phy_i2c0_pins[] = { 15, 16 }; -static int mt7988_u30_phy_i2c0_funcs[] = { 2, 2 }; - -static int mt7988_u32_phy_i2c0_pins[] = { 15, 16 }; -static int mt7988_u32_phy_i2c0_funcs[] = { 3, 3 }; - -static int mt7988_xfi_phy0_i2c1_pins[] = { 15, 16 }; -static int mt7988_xfi_phy0_i2c1_funcs[] = { 5, 5 }; - -static int mt7988_xfi_phy1_i2c1_pins[] = { 15, 16 }; -static int mt7988_xfi_phy1_i2c1_funcs[] = { 6, 6 }; - -static int mt7988_xfi_phy_pll_i2c2_pins[] = { 15, 16 }; -static int mt7988_xfi_phy_pll_i2c2_funcs[] = { 7, 7 }; - -static int mt7988_i2c1_0_pins[] = { 17, 18 }; -static int mt7988_i2c1_0_funcs[] = { 1, 1 }; - -static int mt7988_u30_phy_i2c1_pins[] = { 17, 18 }; -static int mt7988_u30_phy_i2c1_funcs[] = { 2, 2 }; - -static int mt7988_u32_phy_i2c1_pins[] = { 17, 18 }; -static int mt7988_u32_phy_i2c1_funcs[] = { 3, 3 }; - -static int mt7988_xfi_phy_pll_i2c3_pins[] = { 17, 18 }; -static int mt7988_xfi_phy_pll_i2c3_funcs[] = { 4, 4 }; - -static int mt7988_sgmii0_i2c_pins[] = { 17, 18 }; -static int mt7988_sgmii0_i2c_funcs[] = { 5, 5 }; - -static int mt7988_sgmii1_i2c_pins[] = { 17, 18 }; -static int mt7988_sgmii1_i2c_funcs[] = { 6, 6 }; - -static int mt7988_i2c1_2_pins[] = { 69, 70 }; -static int mt7988_i2c1_2_funcs[] = { 2, 2 }; - -static int mt7988_i2c2_0_pins[] = { 69, 70 }; -static int mt7988_i2c2_0_funcs[] = { 4, 4 }; - -static int mt7988_i2c2_1_pins[] = { 71, 72 }; -static int mt7988_i2c2_1_funcs[] = { 1, 1 }; - -/* eth */ -static int mt7988_mdc_mdio0_pins[] = { 5, 6 }; -static int mt7988_mdc_mdio0_funcs[] = { 1, 1 }; - -static int mt7988_2p5g_ext_mdio_pins[] = { 28, 29 }; -static int mt7988_2p5g_ext_mdio_funcs[] = { 6, 6 }; - -static int mt7988_gbe_ext_mdio_pins[] = { 30, 31 }; -static int mt7988_gbe_ext_mdio_funcs[] = { 6, 6 }; - -static int mt7988_mdc_mdio1_pins[] = { 69, 70 }; -static int mt7988_mdc_mdio1_funcs[] = { 1, 1 }; - -/* pcie */ -static int mt7988_pcie_wake_n0_0_pins[] = { 7 }; -static int mt7988_pcie_wake_n0_0_funcs[] = { 1 }; - -static int mt7988_pcie_clk_req_n0_0_pins[] = { 8 }; -static int mt7988_pcie_clk_req_n0_0_funcs[] = { 1 }; - -static int mt7988_pcie_wake_n3_0_pins[] = { 9 }; -static int mt7988_pcie_wake_n3_0_funcs[] = { 1 }; - -static int mt7988_pcie_clk_req_n3_pins[] = { 10 }; -static int mt7988_pcie_clk_req_n3_funcs[] = { 1 }; - -static int mt7988_pcie_clk_req_n0_1_pins[] = { 10 }; -static int mt7988_pcie_clk_req_n0_1_funcs[] = { 2 }; - -static int mt7988_pcie_p0_phy_i2c_pins[] = { 7, 8 }; -static int mt7988_pcie_p0_phy_i2c_funcs[] = { 3, 3 }; - -static int mt7988_pcie_p1_phy_i2c_pins[] = { 7, 8 }; -static int mt7988_pcie_p1_phy_i2c_funcs[] = { 4, 4 }; - -static int mt7988_pcie_p3_phy_i2c_pins[] = { 9, 10 }; -static int mt7988_pcie_p3_phy_i2c_funcs[] = { 4, 4 }; - -static int mt7988_pcie_p2_phy_i2c_pins[] = { 7, 8 }; -static int mt7988_pcie_p2_phy_i2c_funcs[] = { 5, 5 }; - -static int mt7988_ckm_phy_i2c_pins[] = { 9, 10 }; -static int mt7988_ckm_phy_i2c_funcs[] = { 5, 5 }; - -static int mt7988_pcie_wake_n0_1_pins[] = { 13 }; -static int mt7988_pcie_wake_n0_1_funcs[] = { 2 }; - -static int mt7988_pcie_wake_n3_1_pins[] = { 14 }; -static int mt7988_pcie_wake_n3_1_funcs[] = { 2 }; - -static int mt7988_pcie_2l_0_pereset_pins[] = { 19 }; -static int mt7988_pcie_2l_0_pereset_funcs[] = { 1 }; - -static int mt7988_pcie_1l_1_pereset_pins[] = { 20 }; -static int mt7988_pcie_1l_1_pereset_funcs[] = { 1 }; - -static int mt7988_pcie_clk_req_n2_1_pins[] = { 63 }; -static int mt7988_pcie_clk_req_n2_1_funcs[] = { 2 }; - -static int mt7988_pcie_2l_1_pereset_pins[] = { 73 }; -static int mt7988_pcie_2l_1_pereset_funcs[] = { 1 }; - -static int mt7988_pcie_1l_0_pereset_pins[] = { 74 }; -static int mt7988_pcie_1l_0_pereset_funcs[] = { 1 }; - -static int mt7988_pcie_wake_n1_0_pins[] = { 75 }; -static int mt7988_pcie_wake_n1_0_funcs[] = { 1 }; - -static int mt7988_pcie_clk_req_n1_pins[] = { 76 }; -static int mt7988_pcie_clk_req_n1_funcs[] = { 1 }; - -static int mt7988_pcie_wake_n2_0_pins[] = { 77 }; -static int mt7988_pcie_wake_n2_0_funcs[] = { 1 }; - -static int mt7988_pcie_clk_req_n2_0_pins[] = { 78 }; -static int mt7988_pcie_clk_req_n2_0_funcs[] = { 1 }; - -static int mt7988_pcie_wake_n2_1_pins[] = { 79 }; -static int mt7988_pcie_wake_n2_1_funcs[] = { 2 }; - -/* pmic */ -static int mt7988_pmic_pins[] = { 11 }; -static int mt7988_pmic_funcs[] = { 1 }; - -/* watchdog */ -static int mt7988_watchdog_pins[] = { 12 }; -static int mt7988_watchdog_funcs[] = { 1 }; - -/* spi */ -static int mt7988_spi0_wp_hold_pins[] = { 22, 23 }; -static int mt7988_spi0_wp_hold_funcs[] = { 1, 1 }; - -static int mt7988_spi0_pins[] = { 24, 25, 26, 27 }; -static int mt7988_spi0_funcs[] = { 1, 1, 1, 1 }; - -static int mt7988_spi1_pins[] = { 28, 29, 30, 31 }; -static int mt7988_spi1_funcs[] = { 1, 1, 1, 1 }; - -static int mt7988_spi2_pins[] = { 32, 33, 34, 35 }; -static int mt7988_spi2_funcs[] = { 1, 1, 1, 1 }; - -static int mt7988_spi2_wp_hold_pins[] = { 36, 37 }; -static int mt7988_spi2_wp_hold_funcs[] = { 1, 1 }; - -/* flash */ -static int mt7988_snfi_pins[] = { 22, 23, 24, 25, 26, 27 }; -static int mt7988_snfi_funcs[] = { 2, 2, 2, 2, 2, 2 }; - -static int mt7988_emmc_45_pins[] = { - 21, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37 -}; -static int mt7988_emmc_45_funcs[] = { 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 }; - -static int mt7988_sdcard_pins[] = { 32, 33, 34, 35, 36, 37 }; -static int mt7988_sdcard_funcs[] = { 5, 5, 5, 5, 5, 5 }; - -static int mt7988_emmc_51_pins[] = { 38, 39, 40, 41, 42, 43, - 44, 45, 46, 47, 48, 49 }; -static int mt7988_emmc_51_funcs[] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 }; - -/* uart */ -static int mt7988_uart2_pins[] = { 0, 1, 2, 3 }; -static int mt7988_uart2_funcs[] = { 1, 1, 1, 1 }; - -static int mt7988_tops_uart0_0_pins[] = { 22, 23 }; -static int mt7988_tops_uart0_0_funcs[] = { 3, 3 }; - -static int mt7988_uart2_0_pins[] = { 28, 29, 30, 31 }; -static int mt7988_uart2_0_funcs[] = { 2, 2, 2, 2 }; - -static int mt7988_uart1_0_pins[] = { 32, 33, 34, 35 }; -static int mt7988_uart1_0_funcs[] = { 2, 2, 2, 2 }; - -static int mt7988_uart2_1_pins[] = { 32, 33, 34, 35 }; -static int mt7988_uart2_1_funcs[] = { 3, 3, 3, 3 }; - -static int mt7988_net_wo0_uart_txd_0_pins[] = { 28 }; -static int mt7988_net_wo0_uart_txd_0_funcs[] = { 3 }; - -static int mt7988_net_wo1_uart_txd_0_pins[] = { 29 }; -static int mt7988_net_wo1_uart_txd_0_funcs[] = { 3 }; - -static int mt7988_net_wo2_uart_txd_0_pins[] = { 30 }; -static int mt7988_net_wo2_uart_txd_0_funcs[] = { 3 }; - -static int mt7988_tops_uart1_0_pins[] = { 28, 29 }; -static int mt7988_tops_uart1_0_funcs[] = { 4, 4 }; - -static int mt7988_tops_uart0_1_pins[] = { 30, 31 }; -static int mt7988_tops_uart0_1_funcs[] = { 4, 4 }; - -static int mt7988_tops_uart1_1_pins[] = { 36, 37 }; -static int mt7988_tops_uart1_1_funcs[] = { 3, 3 }; - -static int mt7988_uart0_pins[] = { 55, 56 }; -static int mt7988_uart0_funcs[] = { 1, 1 }; - -static int mt7988_tops_uart0_2_pins[] = { 55, 56 }; -static int mt7988_tops_uart0_2_funcs[] = { 2, 2 }; - -static int mt7988_uart2_2_pins[] = { 50, 51, 52, 53 }; -static int mt7988_uart2_2_funcs[] = { 2, 2, 2, 2 }; - -static int mt7988_uart1_1_pins[] = { 58, 59, 60, 61 }; -static int mt7988_uart1_1_funcs[] = { 2, 2, 2, 2 }; - -static int mt7988_uart2_3_pins[] = { 58, 59, 60, 61 }; -static int mt7988_uart2_3_funcs[] = { 3, 3, 3, 3 }; - -static int mt7988_uart1_2_pins[] = { 80, 81, 82, 83 }; -static int mt7988_uart1_2_funcs[] = { 1, 1, 1, 1 }; - -static int mt7988_uart1_2_lite_pins[] = { 80, 81 }; -static int mt7988_uart1_2_lite_funcs[] = { 1, 1 }; - -static int mt7988_tops_uart1_2_pins[] = { 80, 81 }; -static int mt7988_tops_uart1_2_funcs[] = { 4, 4, }; - -static int mt7988_net_wo0_uart_txd_1_pins[] = { 80 }; -static int mt7988_net_wo0_uart_txd_1_funcs[] = { 3 }; - -static int mt7988_net_wo1_uart_txd_1_pins[] = { 81 }; -static int mt7988_net_wo1_uart_txd_1_funcs[] = { 3 }; - -static int mt7988_net_wo2_uart_txd_1_pins[] = { 82 }; -static int mt7988_net_wo2_uart_txd_1_funcs[] = { 3 }; - -/* udi */ -static int mt7988_udi_pins[] = { 32, 33, 34, 35, 36 }; -static int mt7988_udi_funcs[] = { 4, 4, 4, 4, 4 }; - -/* i2s */ -static int mt7988_i2s_pins[] = { 50, 51, 52, 53, 54 }; -static int mt7988_i2s_funcs[] = { 1, 1, 1, 1, 1 }; - -/* pcm */ -static int mt7988_pcm_pins[] = { 50, 51, 52, 53 }; -static int mt7988_pcm_funcs[] = { 1, 1, 1, 1 }; - -/* led */ -static int mt7988_gbe0_led1_pins[] = { 58 }; -static int mt7988_gbe0_led1_funcs[] = { 6 }; -static int mt7988_gbe1_led1_pins[] = { 59 }; -static int mt7988_gbe1_led1_funcs[] = { 6 }; -static int mt7988_gbe2_led1_pins[] = { 60 }; -static int mt7988_gbe2_led1_funcs[] = { 6 }; -static int mt7988_gbe3_led1_pins[] = { 61 }; -static int mt7988_gbe3_led1_funcs[] = { 6 }; - -static int mt7988_2p5gbe_led1_pins[] = { 62 }; -static int mt7988_2p5gbe_led1_funcs[] = { 6 }; - -static int mt7988_gbe0_led0_pins[] = { 64 }; -static int mt7988_gbe0_led0_funcs[] = { 1 }; -static int mt7988_gbe1_led0_pins[] = { 65 }; -static int mt7988_gbe1_led0_funcs[] = { 1 }; -static int mt7988_gbe2_led0_pins[] = { 66 }; -static int mt7988_gbe2_led0_funcs[] = { 1 }; -static int mt7988_gbe3_led0_pins[] = { 67 }; -static int mt7988_gbe3_led0_funcs[] = { 1 }; - -static int mt7988_2p5gbe_led0_pins[] = { 68 }; -static int mt7988_2p5gbe_led0_funcs[] = { 1 }; - -/* usb */ -static int mt7988_drv_vbus_p1_pins[] = { 63 }; -static int mt7988_drv_vbus_p1_funcs[] = { 1 }; - -static int mt7988_drv_vbus_pins[] = { 79 }; -static int mt7988_drv_vbus_funcs[] = { 1 }; - -static const struct group_desc mt7988_groups[] = { - /* @GPIO(0,1,2,3): uart2 */ - PINCTRL_PIN_GROUP("uart2", mt7988_uart2), - /* @GPIO(0,1,2,3,4): tops_jtag0_0 */ - PINCTRL_PIN_GROUP("tops_jtag0_0", mt7988_tops_jtag0_0), - /* @GPIO(2,3): int_usxgmii */ - PINCTRL_PIN_GROUP("int_usxgmii", mt7988_int_usxgmii), - /* @GPIO(0,1,2,3,4): dfd */ - PINCTRL_PIN_GROUP("dfd", mt7988_dfd), - /* @GPIO(0,1): xfi_phy0_i2c0 */ - PINCTRL_PIN_GROUP("xfi_phy0_i2c0", mt7988_xfi_phy0_i2c0), - /* @GPIO(0,1): xfi_phy1_i2c0 */ - PINCTRL_PIN_GROUP("xfi_phy1_i2c0", mt7988_xfi_phy1_i2c0), - /* @GPIO(3,4): xfi_phy_pll_i2c0 */ - PINCTRL_PIN_GROUP("xfi_phy_pll_i2c0", mt7988_xfi_phy_pll_i2c0), - /* @GPIO(3,4): xfi_phy_pll_i2c1 */ - PINCTRL_PIN_GROUP("xfi_phy_pll_i2c1", mt7988_xfi_phy_pll_i2c1), - /* @GPIO(5,6) i2c0_0 */ - PINCTRL_PIN_GROUP("i2c0_0", mt7988_i2c0_0), - /* @GPIO(5,6) i2c1_sfp */ - PINCTRL_PIN_GROUP("i2c1_sfp", mt7988_i2c1_sfp), - /* @GPIO(5,6) xfi_pextp_phy0_i2c */ - PINCTRL_PIN_GROUP("xfi_pextp_phy0_i2c", mt7988_xfi_pextp_phy0_i2c), - /* @GPIO(5,6) xfi_pextp_phy1_i2c */ - PINCTRL_PIN_GROUP("xfi_pextp_phy1_i2c", mt7988_xfi_pextp_phy1_i2c), - /* @GPIO(5,6) mdc_mdio0 */ - PINCTRL_PIN_GROUP("mdc_mdio0", mt7988_mdc_mdio0), - /* @GPIO(7): pcie_wake_n0_0 */ - PINCTRL_PIN_GROUP("pcie_wake_n0_0", mt7988_pcie_wake_n0_0), - /* @GPIO(8): pcie_clk_req_n0_0 */ - PINCTRL_PIN_GROUP("pcie_clk_req_n0_0", mt7988_pcie_clk_req_n0_0), - /* @GPIO(9): pcie_wake_n3_0 */ - PINCTRL_PIN_GROUP("pcie_wake_n3_0", mt7988_pcie_wake_n3_0), - /* @GPIO(10): pcie_clk_req_n3 */ - PINCTRL_PIN_GROUP("pcie_clk_req_n3", mt7988_pcie_clk_req_n3), - /* @GPIO(10): pcie_clk_req_n0_1 */ - PINCTRL_PIN_GROUP("pcie_clk_req_n0_1", mt7988_pcie_clk_req_n0_1), - /* @GPIO(7,8) pcie_p0_phy_i2c */ - PINCTRL_PIN_GROUP("pcie_p0_phy_i2c", mt7988_pcie_p0_phy_i2c), - /* @GPIO(7,8) pcie_p1_phy_i2c */ - PINCTRL_PIN_GROUP("pcie_p1_phy_i2c", mt7988_pcie_p1_phy_i2c), - /* @GPIO(7,8) pcie_p2_phy_i2c */ - PINCTRL_PIN_GROUP("pcie_p2_phy_i2c", mt7988_pcie_p2_phy_i2c), - /* @GPIO(9,10) pcie_p3_phy_i2c */ - PINCTRL_PIN_GROUP("pcie_p3_phy_i2c", mt7988_pcie_p3_phy_i2c), - /* @GPIO(9,10) ckm_phy_i2c */ - PINCTRL_PIN_GROUP("ckm_phy_i2c", mt7988_ckm_phy_i2c), - /* @GPIO(11): pmic */ - PINCTRL_PIN_GROUP("pcie_pmic", mt7988_pmic), - /* @GPIO(12): watchdog */ - PINCTRL_PIN_GROUP("watchdog", mt7988_watchdog), - /* @GPIO(13): pcie_wake_n0_1 */ - PINCTRL_PIN_GROUP("pcie_wake_n0_1", mt7988_pcie_wake_n0_1), - /* @GPIO(14): pcie_wake_n3_1 */ - PINCTRL_PIN_GROUP("pcie_wake_n3_1", mt7988_pcie_wake_n3_1), - /* @GPIO(15,16) i2c0_1 */ - PINCTRL_PIN_GROUP("i2c0_1", mt7988_i2c0_1), - /* @GPIO(15,16) u30_phy_i2c0 */ - PINCTRL_PIN_GROUP("u30_phy_i2c0", mt7988_u30_phy_i2c0), - /* @GPIO(15,16) u32_phy_i2c0 */ - PINCTRL_PIN_GROUP("u32_phy_i2c0", mt7988_u32_phy_i2c0), - /* @GPIO(15,16) xfi_phy0_i2c1 */ - PINCTRL_PIN_GROUP("xfi_phy0_i2c1", mt7988_xfi_phy0_i2c1), - /* @GPIO(15,16) xfi_phy1_i2c1 */ - PINCTRL_PIN_GROUP("xfi_phy1_i2c1", mt7988_xfi_phy1_i2c1), - /* @GPIO(15,16) xfi_phy_pll_i2c2 */ - PINCTRL_PIN_GROUP("xfi_phy_pll_i2c2", mt7988_xfi_phy_pll_i2c2), - /* @GPIO(17,18) i2c1_0 */ - PINCTRL_PIN_GROUP("i2c1_0", mt7988_i2c1_0), - /* @GPIO(17,18) u30_phy_i2c1 */ - PINCTRL_PIN_GROUP("u30_phy_i2c1", mt7988_u30_phy_i2c1), - /* @GPIO(17,18) u32_phy_i2c1 */ - PINCTRL_PIN_GROUP("u32_phy_i2c1", mt7988_u32_phy_i2c1), - /* @GPIO(17,18) xfi_phy_pll_i2c3 */ - PINCTRL_PIN_GROUP("xfi_phy_pll_i2c3", mt7988_xfi_phy_pll_i2c3), - /* @GPIO(17,18) sgmii0_i2c */ - PINCTRL_PIN_GROUP("sgmii0_i2c", mt7988_sgmii0_i2c), - /* @GPIO(17,18) sgmii1_i2c */ - PINCTRL_PIN_GROUP("sgmii1_i2c", mt7988_sgmii1_i2c), - /* @GPIO(19): pcie_2l_0_pereset */ - PINCTRL_PIN_GROUP("pcie_2l_0_pereset", mt7988_pcie_2l_0_pereset), - /* @GPIO(20): pcie_1l_1_pereset */ - PINCTRL_PIN_GROUP("pcie_1l_1_pereset", mt7988_pcie_1l_1_pereset), - /* @GPIO(21): pwm1 */ - PINCTRL_PIN_GROUP("pwm1", mt7988_pwm1), - /* @GPIO(22,23) spi0_wp_hold */ - PINCTRL_PIN_GROUP("spi0_wp_hold", mt7988_spi0_wp_hold), - /* @GPIO(24,25,26,27) spi0 */ - PINCTRL_PIN_GROUP("spi0", mt7988_spi0), - /* @GPIO(28,29,30,31) spi1 */ - PINCTRL_PIN_GROUP("spi1", mt7988_spi1), - /* @GPIO(32,33,34,35) spi2 */ - PINCTRL_PIN_GROUP("spi2", mt7988_spi2), - /* @GPIO(36,37) spi2_wp_hold */ - PINCTRL_PIN_GROUP("spi2_wp_hold", mt7988_spi2_wp_hold), - /* @GPIO(22,23,24,25,26,27) snfi */ - PINCTRL_PIN_GROUP("snfi", mt7988_snfi), - /* @GPIO(22,23) tops_uart0_0 */ - PINCTRL_PIN_GROUP("tops_uart0_0", mt7988_tops_uart0_0), - /* @GPIO(28,29,30,31) uart2_0 */ - PINCTRL_PIN_GROUP("uart2_0", mt7988_uart2_0), - /* @GPIO(32,33,34,35) uart1_0 */ - PINCTRL_PIN_GROUP("uart1_0", mt7988_uart1_0), - /* @GPIO(32,33,34,35) uart2_1 */ - PINCTRL_PIN_GROUP("uart2_1", mt7988_uart2_1), - /* @GPIO(28) net_wo0_uart_txd_0 */ - PINCTRL_PIN_GROUP("net_wo0_uart_txd_0", mt7988_net_wo0_uart_txd_0), - /* @GPIO(29) net_wo1_uart_txd_0 */ - PINCTRL_PIN_GROUP("net_wo1_uart_txd_0", mt7988_net_wo1_uart_txd_0), - /* @GPIO(30) net_wo2_uart_txd_0 */ - PINCTRL_PIN_GROUP("net_wo2_uart_txd_0", mt7988_net_wo2_uart_txd_0), - /* @GPIO(28,29) tops_uart1_0 */ - PINCTRL_PIN_GROUP("tops_uart0_0", mt7988_tops_uart1_0), - /* @GPIO(30,31) tops_uart0_1 */ - PINCTRL_PIN_GROUP("tops_uart0_1", mt7988_tops_uart0_1), - /* @GPIO(36,37) tops_uart1_1 */ - PINCTRL_PIN_GROUP("tops_uart1_1", mt7988_tops_uart1_1), - /* @GPIO(32,33,34,35,36) udi */ - PINCTRL_PIN_GROUP("udi", mt7988_udi), - /* @GPIO(21,28,29,30,31,32,33,34,35,36,37) emmc_45 */ - PINCTRL_PIN_GROUP("emmc_45", mt7988_emmc_45), - /* @GPIO(32,33,34,35,36,37) sdcard */ - PINCTRL_PIN_GROUP("sdcard", mt7988_sdcard), - /* @GPIO(38,39,40,41,42,43,44,45,46,47,48,49) emmc_51 */ - PINCTRL_PIN_GROUP("emmc_51", mt7988_emmc_51), - /* @GPIO(28,29) 2p5g_ext_mdio */ - PINCTRL_PIN_GROUP("2p5g_ext_mdio", mt7988_2p5g_ext_mdio), - /* @GPIO(30,31) gbe_ext_mdio */ - PINCTRL_PIN_GROUP("gbe_ext_mdio", mt7988_gbe_ext_mdio), - /* @GPIO(50,51,52,53,54) i2s */ - PINCTRL_PIN_GROUP("i2s", mt7988_i2s), - /* @GPIO(50,51,52,53) pcm */ - PINCTRL_PIN_GROUP("pcm", mt7988_pcm), - /* @GPIO(55,56) uart0 */ - PINCTRL_PIN_GROUP("uart0", mt7988_uart0), - /* @GPIO(55,56) tops_uart0_2 */ - PINCTRL_PIN_GROUP("tops_uart0_2", mt7988_tops_uart0_2), - /* @GPIO(50,51,52,53) uart2_2 */ - PINCTRL_PIN_GROUP("uart2_2", mt7988_uart2_2), - /* @GPIO(50,51,52,53,54) wo0_jtag */ - PINCTRL_PIN_GROUP("wo0_jtag", mt7988_wo0_jtag), - /* @GPIO(50,51,52,53,54) wo1-wo1_jtag */ - PINCTRL_PIN_GROUP("wo1_jtag", mt7988_wo1_jtag), - /* @GPIO(50,51,52,53,54) wo2_jtag */ - PINCTRL_PIN_GROUP("wo2_jtag", mt7988_wo2_jtag), - /* @GPIO(57) pwm0 */ - PINCTRL_PIN_GROUP("pwm0", mt7988_pwm0), - /* @GPIO(58,59,60,61,62) jtag */ - PINCTRL_PIN_GROUP("jtag", mt7988_jtag), - /* @GPIO(58,59,60,61,62) tops_jtag0_1 */ - PINCTRL_PIN_GROUP("tops_jtag0_1", mt7988_tops_jtag0_1), - /* @GPIO(58,59,60,61) uart2_3 */ - PINCTRL_PIN_GROUP("uart2_3", mt7988_uart2_3), - /* @GPIO(58,59,60,61) uart1_1 */ - PINCTRL_PIN_GROUP("uart1_1", mt7988_uart1_1), - /* @GPIO(58,59,60,61) gbe_led1 */ - PINCTRL_PIN_GROUP("gbe0_led1", mt7988_gbe0_led1), - PINCTRL_PIN_GROUP("gbe1_led1", mt7988_gbe1_led1), - PINCTRL_PIN_GROUP("gbe2_led1", mt7988_gbe2_led1), - PINCTRL_PIN_GROUP("gbe3_led1", mt7988_gbe3_led1), - /* @GPIO(62) 2p5gbe_led1 */ - PINCTRL_PIN_GROUP("2p5gbe_led1", mt7988_2p5gbe_led1), - /* @GPIO(64,65,66,67) gbe_led0 */ - PINCTRL_PIN_GROUP("gbe0_led0", mt7988_gbe0_led0), - PINCTRL_PIN_GROUP("gbe1_led0", mt7988_gbe1_led0), - PINCTRL_PIN_GROUP("gbe2_led0", mt7988_gbe2_led0), - PINCTRL_PIN_GROUP("gbe3_led0", mt7988_gbe3_led0), - /* @GPIO(68) 2p5gbe_led0 */ - PINCTRL_PIN_GROUP("2p5gbe_led0", mt7988_2p5gbe_led0), - /* @GPIO(63) drv_vbus_p1 */ - PINCTRL_PIN_GROUP("drv_vbus_p1", mt7988_drv_vbus_p1), - /* @GPIO(63) pcie_clk_req_n2_1 */ - PINCTRL_PIN_GROUP("pcie_clk_req_n2_1", mt7988_pcie_clk_req_n2_1), - /* @GPIO(69, 70) mdc_mdio1 */ - PINCTRL_PIN_GROUP("mdc_mdio1", mt7988_mdc_mdio1), - /* @GPIO(69, 70) i2c1_2 */ - PINCTRL_PIN_GROUP("i2c1_2", mt7988_i2c1_2), - /* @GPIO(69) pwm6 */ - PINCTRL_PIN_GROUP("pwm6", mt7988_pwm6), - /* @GPIO(70) pwm7 */ - PINCTRL_PIN_GROUP("pwm7", mt7988_pwm7), - /* @GPIO(69,70) i2c2_0 */ - PINCTRL_PIN_GROUP("i2c2_0", mt7988_i2c2_0), - /* @GPIO(71,72) i2c2_1 */ - PINCTRL_PIN_GROUP("i2c2_1", mt7988_i2c2_1), - /* @GPIO(73) pcie_2l_1_pereset */ - PINCTRL_PIN_GROUP("pcie_2l_1_pereset", mt7988_pcie_2l_1_pereset), - /* @GPIO(74) pcie_1l_0_pereset */ - PINCTRL_PIN_GROUP("pcie_1l_0_pereset", mt7988_pcie_1l_0_pereset), - /* @GPIO(75) pcie_wake_n1_0 */ - PINCTRL_PIN_GROUP("pcie_wake_n1_0", mt7988_pcie_wake_n1_0), - /* @GPIO(76) pcie_clk_req_n1 */ - PINCTRL_PIN_GROUP("pcie_clk_req_n1", mt7988_pcie_clk_req_n1), - /* @GPIO(77) pcie_wake_n2_0 */ - PINCTRL_PIN_GROUP("pcie_wake_n2_0", mt7988_pcie_wake_n2_0), - /* @GPIO(78) pcie_clk_req_n2_0 */ - PINCTRL_PIN_GROUP("pcie_clk_req_n2_0", mt7988_pcie_clk_req_n2_0), - /* @GPIO(79) drv_vbus */ - PINCTRL_PIN_GROUP("drv_vbus", mt7988_drv_vbus), - /* @GPIO(79) pcie_wake_n2_1 */ - PINCTRL_PIN_GROUP("pcie_wake_n2_1", mt7988_pcie_wake_n2_1), - /* @GPIO(80,81,82,83) uart1_2 */ - PINCTRL_PIN_GROUP("uart1_2", mt7988_uart1_2), - /* @GPIO(80,81) uart1_2_lite */ - PINCTRL_PIN_GROUP("uart1_2_lite", mt7988_uart1_2_lite), - /* @GPIO(80) pwm2 */ - PINCTRL_PIN_GROUP("pwm2", mt7988_pwm2), - /* @GPIO(81) pwm3 */ - PINCTRL_PIN_GROUP("pwm3", mt7988_pwm3), - /* @GPIO(82) pwm4 */ - PINCTRL_PIN_GROUP("pwm4", mt7988_pwm4), - /* @GPIO(83) pwm5 */ - PINCTRL_PIN_GROUP("pwm5", mt7988_pwm5), - /* @GPIO(80) net_wo0_uart_txd_0 */ - PINCTRL_PIN_GROUP("net_wo0_uart_txd_0", mt7988_net_wo0_uart_txd_0), - /* @GPIO(81) net_wo1_uart_txd_0 */ - PINCTRL_PIN_GROUP("net_wo1_uart_txd_0", mt7988_net_wo1_uart_txd_0), - /* @GPIO(82) net_wo2_uart_txd_0 */ - PINCTRL_PIN_GROUP("net_wo2_uart_txd_0", mt7988_net_wo2_uart_txd_0), - /* @GPIO(80,81) tops_uart1_2 */ - PINCTRL_PIN_GROUP("tops_uart1_2", mt7988_tops_uart1_2), - /* @GPIO(80) net_wo0_uart_txd_1 */ - PINCTRL_PIN_GROUP("net_wo0_uart_txd_1", mt7988_net_wo0_uart_txd_1), - /* @GPIO(81) net_wo1_uart_txd_1 */ - PINCTRL_PIN_GROUP("net_wo1_uart_txd_1", mt7988_net_wo1_uart_txd_1), - /* @GPIO(82) net_wo2_uart_txd_1 */ - PINCTRL_PIN_GROUP("net_wo2_uart_txd_1", mt7988_net_wo2_uart_txd_1), -}; - -/* Joint those groups owning the same capability in user point of view which - * allows that people tend to use through the device tree. - */ -static const char * const mt7988_jtag_groups[] = { - "tops_jtag0_0", "wo0_jtag", "wo1_jtag", - "wo2_jtag", "jtag", "tops_jtag0_1", -}; -static const char * const mt7988_int_usxgmii_groups[] = { - "int_usxgmii", -}; -static const char * const mt7988_pwm_groups[] = { - "pwm0", "pwm1", "pwm2", "pwm3", "pwm4", "pwm5", "pwm6", "pwm7" -}; -static const char * const mt7988_dfd_groups[] = { - "dfd", -}; -static const char * const mt7988_i2c_groups[] = { - "xfi_phy0_i2c0", - "xfi_phy1_i2c0", - "xfi_phy_pll_i2c0", - "xfi_phy_pll_i2c1", - "i2c0_0", - "i2c1_sfp", - "xfi_pextp_phy0_i2c", - "xfi_pextp_phy1_i2c", - "i2c0_1", - "u30_phy_i2c0", - "u32_phy_i2c0", - "xfi_phy0_i2c1", - "xfi_phy1_i2c1", - "xfi_phy_pll_i2c2", - "i2c1_0", - "u30_phy_i2c1", - "u32_phy_i2c1", - "xfi_phy_pll_i2c3", - "sgmii0_i2c", - "sgmii1_i2c", - "i2c1_2", - "i2c2_0", - "i2c2_1", -}; -static const char * const mt7988_ethernet_groups[] = { - "mdc_mdio0", - "2p5g_ext_mdio", - "gbe_ext_mdio", - "mdc_mdio1", -}; -static const char * const mt7988_pcie_groups[] = { - "pcie_wake_n0_0", "pcie_clk_req_n0_0", "pcie_wake_n3_0", - "pcie_clk_req_n3", "pcie_p0_phy_i2c", "pcie_p1_phy_i2c", - "pcie_p3_phy_i2c", "pcie_p2_phy_i2c", "ckm_phy_i2c", - "pcie_wake_n0_1", "pcie_wake_n3_1", "pcie_2l_0_pereset", - "pcie_1l_1_pereset", "pcie_clk_req_n2_1", "pcie_2l_1_pereset", - "pcie_1l_0_pereset", "pcie_wake_n1_0", "pcie_clk_req_n1", - "pcie_wake_n2_0", "pcie_clk_req_n2_0", "pcie_wake_n2_1", - "pcie_clk_req_n0_1" -}; -static const char * const mt7988_pmic_groups[] = { - "pmic", -}; -static const char * const mt7988_wdt_groups[] = { - "watchdog", -}; -static const char * const mt7988_spi_groups[] = { - "spi0", "spi0_wp_hold", "spi1", "spi2", "spi2_wp_hold", -}; -static const char * const mt7988_flash_groups[] = { "emmc_45", "sdcard", "snfi", - "emmc_51" }; -static const char * const mt7988_uart_groups[] = { - "uart2", - "tops_uart0_0", - "uart2_0", - "uart1_0", - "uart2_1", - "net_wo0_uart_txd_0", - "net_wo1_uart_txd_0", - "net_wo2_uart_txd_0", - "tops_uart1_0", - "ops_uart0_1", - "ops_uart1_1", - "uart0", - "tops_uart0_2", - "uart1_1", - "uart2_3", - "uart1_2", - "uart1_2_lite", - "tops_uart1_2", - "net_wo0_uart_txd_1", - "net_wo1_uart_txd_1", - "net_wo2_uart_txd_1", -}; -static const char * const mt7988_udi_groups[] = { - "udi", -}; -static const char * const mt7988_audio_groups[] = { - "i2s", "pcm", -}; -static const char * const mt7988_led_groups[] = { - "gbe0_led1", "gbe1_led1", "gbe2_led1", "gbe3_led1", "2p5gbe_led1", - "gbe0_led0", "gbe1_led0", "gbe2_led0", "gbe3_led0", "2p5gbe_led0", - "wf5g_led0", "wf5g_led1", -}; -static const char * const mt7988_usb_groups[] = { - "drv_vbus", - "drv_vbus_p1", -}; - -static const struct function_desc mt7988_functions[] = { - { "audio", mt7988_audio_groups, ARRAY_SIZE(mt7988_audio_groups) }, - { "jtag", mt7988_jtag_groups, ARRAY_SIZE(mt7988_jtag_groups) }, - { "int_usxgmii", mt7988_int_usxgmii_groups, - ARRAY_SIZE(mt7988_int_usxgmii_groups) }, - { "pwm", mt7988_pwm_groups, ARRAY_SIZE(mt7988_pwm_groups) }, - { "dfd", mt7988_dfd_groups, ARRAY_SIZE(mt7988_dfd_groups) }, - { "i2c", mt7988_i2c_groups, ARRAY_SIZE(mt7988_i2c_groups) }, - { "eth", mt7988_ethernet_groups, ARRAY_SIZE(mt7988_ethernet_groups) }, - { "pcie", mt7988_pcie_groups, ARRAY_SIZE(mt7988_pcie_groups) }, - { "pmic", mt7988_pmic_groups, ARRAY_SIZE(mt7988_pmic_groups) }, - { "watchdog", mt7988_wdt_groups, ARRAY_SIZE(mt7988_wdt_groups) }, - { "spi", mt7988_spi_groups, ARRAY_SIZE(mt7988_spi_groups) }, - { "flash", mt7988_flash_groups, ARRAY_SIZE(mt7988_flash_groups) }, - { "uart", mt7988_uart_groups, ARRAY_SIZE(mt7988_uart_groups) }, - { "udi", mt7988_udi_groups, ARRAY_SIZE(mt7988_udi_groups) }, - { "usb", mt7988_usb_groups, ARRAY_SIZE(mt7988_usb_groups) }, - { "led", mt7988_led_groups, ARRAY_SIZE(mt7988_led_groups) }, -}; - -static const struct mtk_eint_hw mt7988_eint_hw = { - .port_mask = 7, - .ports = 7, - .ap_num = ARRAY_SIZE(mt7988_pins), - .db_cnt = 16, -}; - -static const char * const mt7988_pinctrl_register_base_names[] = { - "gpio_base", "iocfg_tr_base", "iocfg_br_base", - "iocfg_rb_base", "iocfg_lb_base", "iocfg_tl_base", -}; - -static struct mtk_pin_soc mt7988_data = { - .reg_cal = mt7988_reg_cals, - .pins = mt7988_pins, - .npins = ARRAY_SIZE(mt7988_pins), - .grps = mt7988_groups, - .ngrps = ARRAY_SIZE(mt7988_groups), - .funcs = mt7988_functions, - .nfuncs = ARRAY_SIZE(mt7988_functions), - .eint_hw = &mt7988_eint_hw, - .gpio_m = 0, - .ies_present = false, - .base_names = mt7988_pinctrl_register_base_names, - .nbase_names = ARRAY_SIZE(mt7988_pinctrl_register_base_names), - .bias_disable_set = mtk_pinconf_bias_disable_set, - .bias_disable_get = mtk_pinconf_bias_disable_get, - .bias_set = mtk_pinconf_bias_set, - .bias_get = mtk_pinconf_bias_get, - .pull_type = mt7988_pull_type, - .bias_set_combo = mtk_pinconf_bias_set_combo, - .bias_get_combo = mtk_pinconf_bias_get_combo, - .drive_set = mtk_pinconf_drive_set_rev1, - .drive_get = mtk_pinconf_drive_get_rev1, - .adv_pull_get = mtk_pinconf_adv_pull_get, - .adv_pull_set = mtk_pinconf_adv_pull_set, -}; - -static const struct of_device_id mt7988_pinctrl_of_match[] = { - { - .compatible = "mediatek,mt7988-pinctrl", - }, - {} -}; - -static int mt7988_pinctrl_probe(struct platform_device *pdev) -{ - return mtk_moore_pinctrl_probe(pdev, &mt7988_data); -} - -static struct platform_driver mt7988_pinctrl_driver = { - .driver = { - .name = "mt7988-pinctrl", - .of_match_table = mt7988_pinctrl_of_match, - }, - .probe = mt7988_pinctrl_probe, -}; - -static int __init mt7988_pinctrl_init(void) -{ - return platform_driver_register(&mt7988_pinctrl_driver); -} -arch_initcall(mt7988_pinctrl_init); diff --git a/target/linux/mediatek/filogic/config-6.1 b/target/linux/mediatek/filogic/config-6.1 deleted file mode 100644 index 663bb054a28..00000000000 --- a/target/linux/mediatek/filogic/config-6.1 +++ /dev/null @@ -1,486 +0,0 @@ -CONFIG_64BIT=y -# CONFIG_AHCI_MTK is not set -CONFIG_AIROHA_EN8801SC_PHY=y -CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y -CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y -CONFIG_ARCH_DMA_ADDR_T_64BIT=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_ARCH_MEDIATEK=y -CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y -CONFIG_ARCH_MMAP_RND_BITS=18 -CONFIG_ARCH_MMAP_RND_BITS_MAX=24 -CONFIG_ARCH_MMAP_RND_BITS_MIN=18 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_PROC_KCORE_TEXT=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_STACKWALK=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_WANTS_NO_INSTR=y -CONFIG_ARCH_WANTS_THP_SWAP=y -CONFIG_ARM64=y -CONFIG_ARM64_4K_PAGES=y -CONFIG_ARM64_ERRATUM_843419=y -CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y -CONFIG_ARM64_PAGE_SHIFT=12 -CONFIG_ARM64_PA_BITS=48 -CONFIG_ARM64_PA_BITS_48=y -CONFIG_ARM64_TAGGED_ADDR_ABI=y -CONFIG_ARM64_VA_BITS=39 -CONFIG_ARM64_VA_BITS_39=y -CONFIG_ARM_AMBA=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -CONFIG_ARM_GIC=y -CONFIG_ARM_GIC_V2M=y -CONFIG_ARM_GIC_V3=y -CONFIG_ARM_GIC_V3_ITS=y -CONFIG_ARM_GIC_V3_ITS_PCI=y -CONFIG_ARM_MEDIATEK_CPUFREQ=y -CONFIG_ARM_PMU=y -CONFIG_ARM_PSCI_FW=y -CONFIG_ATA=y -CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BLK_NVMEM=y -CONFIG_BLK_PM=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_CC_HAVE_SHADOW_CALL_STACK=y -CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y -CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" -CONFIG_CC_NO_ARRAY_BOUNDS=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE_OVERRIDE=y -CONFIG_COMMON_CLK=y -CONFIG_COMMON_CLK_MEDIATEK=y -# CONFIG_COMMON_CLK_MT2712 is not set -# CONFIG_COMMON_CLK_MT6779 is not set -# CONFIG_COMMON_CLK_MT6795 is not set -# CONFIG_COMMON_CLK_MT6797 is not set -# CONFIG_COMMON_CLK_MT7622 is not set -CONFIG_COMMON_CLK_MT7981=y -CONFIG_COMMON_CLK_MT7981_ETHSYS=y -CONFIG_COMMON_CLK_MT7986=y -CONFIG_COMMON_CLK_MT7986_ETHSYS=y -CONFIG_COMMON_CLK_MT7988=y -# CONFIG_COMMON_CLK_MT8173 is not set -# CONFIG_COMMON_CLK_MT8183 is not set -# CONFIG_COMMON_CLK_MT8186 is not set -# CONFIG_COMMON_CLK_MT8195 is not set -# CONFIG_COMMON_CLK_MT8365 is not set -# CONFIG_COMMON_CLK_MT8516 is not set -CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1 -# CONFIG_COMPAT_32BIT_TIME is not set -CONFIG_CONFIGFS_FS=y -CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15 -CONFIG_CONTEXT_TRACKING=y -CONFIG_CONTEXT_TRACKING_IDLE=y -# CONFIG_CPUFREQ_DT is not set -CONFIG_CPU_FREQ=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_THERMAL=y -CONFIG_CRC16=y -CONFIG_CRC_CCITT=y -CONFIG_CRYPTO_AES_ARM64=y -CONFIG_CRYPTO_AES_ARM64_CE=y -CONFIG_CRYPTO_AES_ARM64_CE_BLK=y -CONFIG_CRYPTO_AES_ARM64_CE_CCM=y -CONFIG_CRYPTO_CMAC=y -CONFIG_CRYPTO_CRC32=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRYPTD=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_DRBG=y -CONFIG_CRYPTO_DRBG_HMAC=y -CONFIG_CRYPTO_DRBG_MENU=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_ECC=y -CONFIG_CRYPTO_ECDH=y -CONFIG_CRYPTO_GHASH_ARM64_CE=y -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_JITTERENTROPY=y -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y -CONFIG_CRYPTO_LIB_SHA1=y -CONFIG_CRYPTO_LIB_SHA256=y -CONFIG_CRYPTO_LIB_UTILS=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA256_ARM64=y -CONFIG_CRYPTO_SHA2_ARM64_CE=y -CONFIG_CRYPTO_SHA3=y -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_ZSTD=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_MISC=y -CONFIG_DIMLIB=y -CONFIG_DMADEVICES=y -CONFIG_DMATEST=y -CONFIG_DMA_DIRECT_REMAP=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_ENGINE_RAID=y -CONFIG_DMA_OF=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DTC=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EINT_MTK=y -CONFIG_EXCLUSIVE_SYSTEM_RAM=y -CONFIG_EXT4_FS=y -CONFIG_F2FS_FS=y -CONFIG_FIT_PARTITION=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FRAME_POINTER=y -CONFIG_FS_IOMAP=y -CONFIG_FS_MBCACHE=y -CONFIG_FWNODE_MDIO=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_FW_LOADER_SYSFS=y -CONFIG_GCC11_NO_ARRAY_BOUNDS=y -CONFIG_GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ARCH_TOPOLOGY=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_CPU_VULNERABILITIES=y -CONFIG_GENERIC_CSUM=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IOREMAP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GLOB=y -CONFIG_GPIO_CDEV=y -CONFIG_GPIO_WATCHDOG=y -CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y -CONFIG_GRO_CELLS=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HWMON=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_MTK=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MT65XX=y -CONFIG_ICPLUS_PHY=y -CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_TIME_ACCOUNTING=y -CONFIG_IRQ_WORK=y -CONFIG_JBD2=y -CONFIG_JUMP_LABEL=y -CONFIG_LEDS_SMARTRG_LED=y -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_MAXLINEAR_GPHY=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_DEVRES=y -CONFIG_MEDIATEK_2P5G_PHY=y -CONFIG_MEDIATEK_GE_PHY=y -CONFIG_MEDIATEK_GE_SOC_PHY=y -CONFIG_MEDIATEK_WATCHDOG=y -CONFIG_MEMFD_CREATE=y -CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7 -CONFIG_MFD_SYSCON=y -CONFIG_MIGRATION=y -# CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY is not set -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_CQHCI=y -CONFIG_MMC_MTK=y -CONFIG_MODULES_TREE_LOOKUP=y -CONFIG_MODULES_USE_ELF_RELA=y -CONFIG_MTD_NAND_CORE=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_ECC_MEDIATEK=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=y -CONFIG_MTD_NAND_MTK=y -CONFIG_MTD_NAND_MTK_BMT=y -CONFIG_MTD_PARSER_TRX=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_SPI_NAND=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_SPLIT_FIT_FW=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -CONFIG_MTD_UBI_FASTMAP=y -CONFIG_MTD_UBI_NVMEM=y -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -# CONFIG_MTK_CMDQ is not set -# CONFIG_MTK_CQDMA is not set -CONFIG_MTK_HSDMA=y -CONFIG_MTK_INFRACFG=y -CONFIG_MTK_PMIC_WRAP=y -CONFIG_MTK_SCPSYS=y -CONFIG_MTK_SCPSYS_PM_DOMAINS=y -# CONFIG_MTK_SVS is not set -CONFIG_MTK_THERMAL=y -CONFIG_MTK_SOC_THERMAL=y -CONFIG_MTK_LVTS_THERMAL=y -CONFIG_MTK_LVTS_THERMAL_DEBUGFS=y -CONFIG_MTK_TIMER=y -# CONFIG_MTK_UART_APDMA is not set -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_NET_DEVLINK=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_MT7530=y -CONFIG_NET_DSA_MT7530_MDIO=y -CONFIG_NET_DSA_MT7530_MMIO=y -CONFIG_NET_DSA_TAG_MTK=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_MEDIATEK_SOC=y -CONFIG_NET_MEDIATEK_SOC_WED=y -CONFIG_NET_SELFTESTS=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NET_VENDOR_MEDIATEK=y -CONFIG_NLS=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NR_CPUS=4 -CONFIG_NVMEM=y -CONFIG_NVMEM_LAYOUTS=y -CONFIG_NVMEM_MTK_EFUSE=y -CONFIG_NVMEM_SYSFS=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_DYNAMIC=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OF_OVERLAY=y -CONFIG_OF_RESOLVE=y -CONFIG_PADATA=y -CONFIG_PAGE_POOL=y -CONFIG_PAGE_POOL_STATS=y -CONFIG_PAGE_SIZE_LESS_THAN_256KB=y -CONFIG_PAGE_SIZE_LESS_THAN_64KB=y -CONFIG_PARTITION_PERCPU=y -CONFIG_PCI=y -CONFIG_PCIEAER=y -CONFIG_PCIEASPM=y -# CONFIG_PCIEASPM_DEFAULT is not set -CONFIG_PCIEASPM_PERFORMANCE=y -# CONFIG_PCIEASPM_POWERSAVE is not set -# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set -CONFIG_PCIEPORTBUS=y -# CONFIG_PCIE_MEDIATEK is not set -CONFIG_PCIE_MEDIATEK_GEN3=y -CONFIG_PCIE_PME=y -CONFIG_PCI_DEBUG=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -CONFIG_PCS_MTK_LYNXI=y -CONFIG_PCS_MTK_USXGMII=y -CONFIG_PERF_EVENTS=y -CONFIG_PGTABLE_LEVELS=3 -CONFIG_PHYLIB=y -CONFIG_PHYLIB_LEDS=y -CONFIG_PHYLINK=y -CONFIG_PHYS_ADDR_T_64BIT=y -# CONFIG_PHY_MTK_DP is not set -# CONFIG_PHY_MTK_PCIE is not set -CONFIG_PHY_MTK_TPHY=y -# CONFIG_PHY_MTK_UFS is not set -CONFIG_PHY_MTK_XFI_TPHY=y -CONFIG_PHY_MTK_XSPHY=y -CONFIG_PINCTRL=y -# CONFIG_PINCTRL_MT2712 is not set -# CONFIG_PINCTRL_MT6765 is not set -# CONFIG_PINCTRL_MT6795 is not set -# CONFIG_PINCTRL_MT6797 is not set -# CONFIG_PINCTRL_MT7622 is not set -CONFIG_PINCTRL_MT7981=y -CONFIG_PINCTRL_MT7986=y -CONFIG_PINCTRL_MT7988=y -# CONFIG_PINCTRL_MT8173 is not set -# CONFIG_PINCTRL_MT8183 is not set -# CONFIG_PINCTRL_MT8186 is not set -# CONFIG_PINCTRL_MT8188 is not set -# CONFIG_PINCTRL_MT8516 is not set -CONFIG_PINCTRL_MTK_MOORE=y -CONFIG_PINCTRL_MTK_V2=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PM=y -CONFIG_PM_CLK=y -CONFIG_PM_GENERIC_DOMAINS=y -CONFIG_PM_GENERIC_DOMAINS_OF=y -CONFIG_PM_OPP=y -CONFIG_POLYNOMIAL=y -CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_SYSCON=y -CONFIG_POWER_SUPPLY=y -CONFIG_PREEMPT_NONE_BUILD=y -CONFIG_PRINTK_TIME=y -CONFIG_PSTORE=y -CONFIG_PSTORE_COMPRESS=y -CONFIG_PSTORE_COMPRESS_DEFAULT="deflate" -CONFIG_PSTORE_CONSOLE=y -CONFIG_PSTORE_DEFLATE_COMPRESS=y -CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y -CONFIG_PSTORE_PMSG=y -CONFIG_PSTORE_RAM=y -CONFIG_PTP_1588_CLOCK_OPTIONAL=y -CONFIG_PWM=y -CONFIG_PWM_MEDIATEK=y -# CONFIG_PWM_MTK_DISP is not set -CONFIG_PWM_SYSFS=y -CONFIG_QUEUED_RWLOCKS=y -CONFIG_QUEUED_SPINLOCKS=y -CONFIG_RANDSTRUCT_NONE=y -CONFIG_RAS=y -CONFIG_RATIONAL=y -# CONFIG_RAVE_SP_CORE is not set -CONFIG_REALTEK_PHY=y -CONFIG_REED_SOLOMON=y -CONFIG_REED_SOLOMON_DEC8=y -CONFIG_REED_SOLOMON_ENC8=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_MT6380=y -CONFIG_REGULATOR_RT5190A=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RESET_TI_SYSCON=y -CONFIG_RFS_ACCEL=y -CONFIG_RODATA_FULL_DEFAULT_ENABLED=y -CONFIG_RPS=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_MT7622=y -CONFIG_RTC_I2C_AND_SPI=y -# CONFIG_RTL8367S_GSW is not set -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_SCHED_MC=y -CONFIG_SCSI=y -CONFIG_SCSI_COMMON=y -# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_8250_MT6577=y -CONFIG_SERIAL_8250_NR_UARTS=3 -CONFIG_SERIAL_8250_RUNTIME_UARTS=3 -CONFIG_SERIAL_DEV_BUS=y -CONFIG_SERIAL_DEV_CTRL_TTYPORT=y -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SGL_ALLOC=y -CONFIG_SG_POOL=y -CONFIG_SMP=y -CONFIG_SOCK_RX_QUEUE_MAPPING=y -CONFIG_SOFTIRQ_ON_OWN_STACK=y -CONFIG_SPARSEMEM=y -CONFIG_SPARSEMEM_EXTREME=y -CONFIG_SPARSEMEM_VMEMMAP=y -CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_DYNAMIC=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SPI_MT65XX=y -# CONFIG_SPI_MTK_NOR is not set -CONFIG_SPI_MTK_SNFI=y -# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set -CONFIG_SQUASHFS_DECOMP_SINGLE=y -CONFIG_SRCU=y -CONFIG_SWIOTLB=y -CONFIG_SWPHY=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_BANG_BANG=y -CONFIG_THERMAL_GOV_FAIR_SHARE=y -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_GOV_USER_SPACE=y -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_OF=y -CONFIG_THERMAL_WRITABLE_TRIPS=y -CONFIG_THREAD_INFO_IN_TASK=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -CONFIG_UBIFS_FS=y -# CONFIG_UCLAMP_TASK is not set -CONFIG_UIMAGE_FIT_BLK=y -# CONFIG_UNMAP_KERNEL_AT_EL0 is not set -CONFIG_USB_SUPPORT=y -CONFIG_VMAP_STACK=y -CONFIG_WATCHDOG_CORE=y -CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y -CONFIG_WATCHDOG_PRETIMEOUT_GOV=y -# CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP is not set -CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y -CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m -CONFIG_WATCHDOG_SYSFS=y -CONFIG_XPS=y -CONFIG_XXHASH=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZONE_DMA32=y -CONFIG_ZSTD_COMMON=y -CONFIG_ZSTD_COMPRESS=y -CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/mediatek/mt7622/config-6.1 b/target/linux/mediatek/mt7622/config-6.1 deleted file mode 100644 index 68bdd87074b..00000000000 --- a/target/linux/mediatek/mt7622/config-6.1 +++ /dev/null @@ -1,479 +0,0 @@ -CONFIG_64BIT=y -# CONFIG_AHCI_MTK is not set -# CONFIG_AIROHA_EN8801SC_PHY is not set -CONFIG_AQUANTIA_PHY=y -CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y -CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y -CONFIG_ARCH_DMA_ADDR_T_64BIT=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_ARCH_MEDIATEK=y -CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y -CONFIG_ARCH_MMAP_RND_BITS=18 -CONFIG_ARCH_MMAP_RND_BITS_MAX=24 -CONFIG_ARCH_MMAP_RND_BITS_MIN=18 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_PROC_KCORE_TEXT=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_STACKWALK=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_WANTS_NO_INSTR=y -CONFIG_ARCH_WANTS_THP_SWAP=y -CONFIG_ARM64=y -CONFIG_ARM64_4K_PAGES=y -CONFIG_ARM64_ERRATUM_843419=y -CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y -CONFIG_ARM64_PAGE_SHIFT=12 -CONFIG_ARM64_PA_BITS=48 -CONFIG_ARM64_PA_BITS_48=y -CONFIG_ARM64_TAGGED_ADDR_ABI=y -CONFIG_ARM64_VA_BITS=39 -CONFIG_ARM64_VA_BITS_39=y -CONFIG_ARM_AMBA=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -CONFIG_ARM_GIC=y -CONFIG_ARM_GIC_V2M=y -CONFIG_ARM_GIC_V3=y -CONFIG_ARM_GIC_V3_ITS=y -CONFIG_ARM_GIC_V3_ITS_PCI=y -CONFIG_ARM_MEDIATEK_CPUFREQ=y -CONFIG_ARM_PMU=y -CONFIG_ARM_PSCI_FW=y -CONFIG_ATA=y -CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BLK_PM=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_CC_HAVE_SHADOW_CALL_STACK=y -CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y -CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" -CONFIG_CC_NO_ARRAY_BOUNDS=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLONE_BACKWARDS=y -# CONFIG_CMDLINE_OVERRIDE is not set -CONFIG_COMMON_CLK=y -CONFIG_COMMON_CLK_MEDIATEK=y -CONFIG_COMMON_CLK_MT2712=y -# CONFIG_COMMON_CLK_MT2712_BDPSYS is not set -# CONFIG_COMMON_CLK_MT2712_IMGSYS is not set -# CONFIG_COMMON_CLK_MT2712_JPGDECSYS is not set -# CONFIG_COMMON_CLK_MT2712_MFGCFG is not set -# CONFIG_COMMON_CLK_MT2712_MMSYS is not set -# CONFIG_COMMON_CLK_MT2712_VDECSYS is not set -# CONFIG_COMMON_CLK_MT2712_VENCSYS is not set -# CONFIG_COMMON_CLK_MT6779 is not set -# CONFIG_COMMON_CLK_MT6795 is not set -# CONFIG_COMMON_CLK_MT6797 is not set -CONFIG_COMMON_CLK_MT7622=y -CONFIG_COMMON_CLK_MT7622_AUDSYS=y -CONFIG_COMMON_CLK_MT7622_ETHSYS=y -CONFIG_COMMON_CLK_MT7622_HIFSYS=y -# CONFIG_COMMON_CLK_MT7981 is not set -# CONFIG_COMMON_CLK_MT7986 is not set -# CONFIG_COMMON_CLK_MT7988 is not set -# CONFIG_COMMON_CLK_MT8173 is not set -# CONFIG_COMMON_CLK_MT8183 is not set -# CONFIG_COMMON_CLK_MT8186 is not set -# CONFIG_COMMON_CLK_MT8195 is not set -# CONFIG_COMMON_CLK_MT8365 is not set -# CONFIG_COMMON_CLK_MT8516 is not set -CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1 -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CONFIGFS_FS=y -CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15 -CONFIG_CONTEXT_TRACKING=y -CONFIG_CONTEXT_TRACKING_IDLE=y -# CONFIG_CPUFREQ_DT is not set -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_THERMAL=y -CONFIG_CRC16=y -CONFIG_CRC_CCITT=y -CONFIG_CRYPTO_AES_ARM64=y -CONFIG_CRYPTO_AES_ARM64_CE=y -CONFIG_CRYPTO_AES_ARM64_CE_BLK=y -CONFIG_CRYPTO_AES_ARM64_CE_CCM=y -CONFIG_CRYPTO_CMAC=y -CONFIG_CRYPTO_CRC32=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRYPTD=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_DRBG=y -CONFIG_CRYPTO_DRBG_HMAC=y -CONFIG_CRYPTO_DRBG_MENU=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_ECC=y -CONFIG_CRYPTO_ECDH=y -CONFIG_CRYPTO_GHASH_ARM64_CE=y -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_JITTERENTROPY=y -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y -CONFIG_CRYPTO_LIB_SHA1=y -CONFIG_CRYPTO_LIB_SHA256=y -CONFIG_CRYPTO_LIB_UTILS=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA256_ARM64=y -CONFIG_CRYPTO_SHA2_ARM64_CE=y -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_ZSTD=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_MISC=y -CONFIG_DIMLIB=y -CONFIG_DMADEVICES=y -CONFIG_DMA_DIRECT_REMAP=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_OF=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DTC=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EINT_MTK=y -CONFIG_EXCLUSIVE_SYSTEM_RAM=y -CONFIG_EXT4_FS=y -CONFIG_F2FS_FS=y -# CONFIG_FIT_PARTITION is not set -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FRAME_POINTER=y -CONFIG_FS_IOMAP=y -CONFIG_FS_MBCACHE=y -CONFIG_FWNODE_MDIO=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_FW_LOADER_SYSFS=y -CONFIG_GCC11_NO_ARRAY_BOUNDS=y -CONFIG_GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ARCH_TOPOLOGY=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_CPU_VULNERABILITIES=y -CONFIG_GENERIC_CSUM=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IOREMAP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GLOB=y -CONFIG_GPIO_CDEV=y -CONFIG_GRO_CELLS=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_MTK=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MT65XX=y -CONFIG_ICPLUS_PHY=y -CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_TIME_ACCOUNTING=y -CONFIG_IRQ_WORK=y -CONFIG_JBD2=y -CONFIG_JUMP_LABEL=y -# CONFIG_LEDS_SMARTRG_LED is not set -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_MAXLINEAR_GPHY=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_DEVRES=y -# CONFIG_MEDIATEK_2P5G_PHY is not set -CONFIG_MEDIATEK_GE_PHY=y -# CONFIG_MEDIATEK_GE_SOC_PHY is not set -CONFIG_MEDIATEK_WATCHDOG=y -CONFIG_MEMFD_CREATE=y -CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7 -CONFIG_MFD_SYSCON=y -CONFIG_MIGRATION=y -# CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY is not set -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_CQHCI=y -CONFIG_MMC_MTK=y -CONFIG_MODULES_TREE_LOOKUP=y -CONFIG_MODULES_USE_ELF_RELA=y -CONFIG_MTD_NAND_CORE=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_ECC_MEDIATEK=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=y -CONFIG_MTD_NAND_MTK=y -CONFIG_MTD_NAND_MTK_BMT=y -CONFIG_MTD_PARSER_TRX=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_SPI_NAND=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPI_NOR_USE_VARIABLE_ERASE=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_SPLIT_FIT_FW=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -CONFIG_MTD_UBI_FASTMAP=y -CONFIG_MTD_UBI_NVMEM=y -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -# CONFIG_MTK_CMDQ is not set -# CONFIG_MTK_CQDMA is not set -CONFIG_MTK_HSDMA=y -CONFIG_MTK_INFRACFG=y -CONFIG_MTK_PMIC_WRAP=y -CONFIG_MTK_SCPSYS=y -CONFIG_MTK_SCPSYS_PM_DOMAINS=y -# CONFIG_MTK_SVS is not set -CONFIG_MTK_THERMAL=y -CONFIG_MTK_SOC_THERMAL=y -# CONFIG_MTK_LVTS_THERMAL is not set -CONFIG_MTK_TIMER=y -# CONFIG_MTK_UART_APDMA is not set -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_NET_DEVLINK=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_MT7530=y -CONFIG_NET_DSA_MT7530_MDIO=y -# CONFIG_NET_DSA_MT7530_MMIO is not set -CONFIG_NET_DSA_TAG_MTK=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_MEDIATEK_SOC=y -# CONFIG_NET_MEDIATEK_SOC_USXGMII is not set -CONFIG_NET_MEDIATEK_SOC_WED=y -CONFIG_NET_SELFTESTS=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NET_VENDOR_MEDIATEK=y -CONFIG_NLS=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NR_CPUS=2 -CONFIG_NVMEM=y -CONFIG_NVMEM_LAYOUTS=y -CONFIG_NVMEM_MTK_EFUSE=y -CONFIG_NVMEM_SYSFS=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_DYNAMIC=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OF_OVERLAY=y -CONFIG_OF_RESOLVE=y -CONFIG_PADATA=y -CONFIG_PAGE_POOL=y -CONFIG_PAGE_POOL_STATS=y -CONFIG_PAGE_SIZE_LESS_THAN_256KB=y -CONFIG_PAGE_SIZE_LESS_THAN_64KB=y -CONFIG_PARTITION_PERCPU=y -CONFIG_PCI=y -CONFIG_PCIEAER=y -CONFIG_PCIEASPM=y -# CONFIG_PCIEASPM_DEFAULT is not set -CONFIG_PCIEASPM_PERFORMANCE=y -# CONFIG_PCIEASPM_POWERSAVE is not set -# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set -CONFIG_PCIEPORTBUS=y -CONFIG_PCIE_MEDIATEK=y -CONFIG_PCIE_PME=y -CONFIG_PCI_DEBUG=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -CONFIG_PCS_MTK_LYNXI=y -CONFIG_PERF_EVENTS=y -CONFIG_PGTABLE_LEVELS=3 -CONFIG_PHYLIB=y -CONFIG_PHYLINK=y -CONFIG_PHYS_ADDR_T_64BIT=y -# CONFIG_PHY_MTK_DP is not set -# CONFIG_PHY_MTK_PCIE is not set -CONFIG_PHY_MTK_TPHY=y -# CONFIG_PHY_MTK_UFS is not set -# CONFIG_PHY_MTK_XSPHY is not set -CONFIG_PINCTRL=y -# CONFIG_PINCTRL_MT2712 is not set -# CONFIG_PINCTRL_MT6765 is not set -# CONFIG_PINCTRL_MT6795 is not set -# CONFIG_PINCTRL_MT6797 is not set -CONFIG_PINCTRL_MT7622=y -# CONFIG_PINCTRL_MT7981 is not set -# CONFIG_PINCTRL_MT7986 is not set -# CONFIG_PINCTRL_MT7988 is not set -# CONFIG_PINCTRL_MT8173 is not set -# CONFIG_PINCTRL_MT8183 is not set -# CONFIG_PINCTRL_MT8186 is not set -# CONFIG_PINCTRL_MT8188 is not set -# CONFIG_PINCTRL_MT8516 is not set -CONFIG_PINCTRL_MTK_MOORE=y -CONFIG_PINCTRL_MTK_V2=y -CONFIG_PM=y -CONFIG_PM_CLK=y -CONFIG_PM_GENERIC_DOMAINS=y -CONFIG_PM_GENERIC_DOMAINS_OF=y -CONFIG_PM_OPP=y -CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_SYSCON=y -CONFIG_POWER_SUPPLY=y -CONFIG_PREEMPT_NONE_BUILD=y -CONFIG_PRINTK_TIME=y -CONFIG_PSTORE=y -CONFIG_PSTORE_COMPRESS=y -CONFIG_PSTORE_COMPRESS_DEFAULT="deflate" -CONFIG_PSTORE_CONSOLE=y -CONFIG_PSTORE_DEFLATE_COMPRESS=y -CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y -CONFIG_PSTORE_PMSG=y -CONFIG_PSTORE_RAM=y -CONFIG_PTP_1588_CLOCK_OPTIONAL=y -CONFIG_PWM=y -CONFIG_PWM_MEDIATEK=y -# CONFIG_PWM_MTK_DISP is not set -CONFIG_PWM_SYSFS=y -CONFIG_QUEUED_RWLOCKS=y -CONFIG_QUEUED_SPINLOCKS=y -CONFIG_RANDSTRUCT_NONE=y -CONFIG_RAS=y -CONFIG_RATIONAL=y -# CONFIG_RAVE_SP_CORE is not set -CONFIG_REALTEK_PHY=y -CONFIG_REED_SOLOMON=y -CONFIG_REED_SOLOMON_DEC8=y -CONFIG_REED_SOLOMON_ENC8=y -CONFIG_REGMAP=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_MT6380=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RFS_ACCEL=y -CONFIG_RODATA_FULL_DEFAULT_ENABLED=y -CONFIG_RPS=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_MT7622=y -CONFIG_RTC_I2C_AND_SPI=y -CONFIG_RTL8367S_GSW=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_SCHED_MC=y -CONFIG_SCSI=y -CONFIG_SCSI_COMMON=y -# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_8250_MT6577=y -CONFIG_SERIAL_8250_NR_UARTS=3 -CONFIG_SERIAL_8250_RUNTIME_UARTS=3 -CONFIG_SERIAL_DEV_BUS=y -CONFIG_SERIAL_DEV_CTRL_TTYPORT=y -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SGL_ALLOC=y -CONFIG_SG_POOL=y -CONFIG_SMP=y -CONFIG_SOCK_RX_QUEUE_MAPPING=y -CONFIG_SOFTIRQ_ON_OWN_STACK=y -CONFIG_SPARSEMEM=y -CONFIG_SPARSEMEM_EXTREME=y -CONFIG_SPARSEMEM_VMEMMAP=y -CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_DYNAMIC=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SPI_MT65XX=y -CONFIG_SPI_MTK_NOR=y -CONFIG_SPI_MTK_SNFI=y -CONFIG_SRCU=y -CONFIG_SWCONFIG=y -CONFIG_SWIOTLB=y -CONFIG_SWPHY=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_EMULATION=y -CONFIG_THERMAL_GOV_BANG_BANG=y -CONFIG_THERMAL_GOV_FAIR_SHARE=y -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_GOV_USER_SPACE=y -CONFIG_THERMAL_OF=y -CONFIG_THERMAL_WRITABLE_TRIPS=y -CONFIG_THREAD_INFO_IN_TASK=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -CONFIG_UBIFS_FS=y -# CONFIG_UCLAMP_TASK is not set -CONFIG_UIMAGE_FIT_BLK=y -# CONFIG_UNMAP_KERNEL_AT_EL0 is not set -CONFIG_USB_SUPPORT=y -CONFIG_VMAP_STACK=y -CONFIG_WATCHDOG_CORE=y -CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y -CONFIG_WATCHDOG_PRETIMEOUT_GOV=y -# CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP is not set -CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y -CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m -CONFIG_WATCHDOG_SYSFS=y -CONFIG_XPS=y -CONFIG_XXHASH=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZONE_DMA32=y -CONFIG_ZSTD_COMMON=y -CONFIG_ZSTD_COMPRESS=y -CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/mediatek/mt7623/config-6.1 b/target/linux/mediatek/mt7623/config-6.1 deleted file mode 100644 index 1407188e2ee..00000000000 --- a/target/linux/mediatek/mt7623/config-6.1 +++ /dev/null @@ -1,615 +0,0 @@ -# CONFIG_AIO is not set -# CONFIG_AIROHA_EN8801SC_PHY is not set -CONFIG_ALIGNMENT_TRAP=y -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_FORCE_MAX_ORDER=11 -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_ARCH_MEDIATEK=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARM=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -# CONFIG_ARM_ATAG_DTB_COMPAT is not set -CONFIG_ARM_CPU_SUSPEND=y -# CONFIG_ARM_CPU_TOPOLOGY is not set -CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8 -CONFIG_ARM_DMA_USE_IOMMU=y -CONFIG_ARM_GIC=y -CONFIG_ARM_HAS_GROUP_RELOCS=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -# CONFIG_ARM_MEDIATEK_CCI_DEVFREQ is not set -CONFIG_ARM_MEDIATEK_CPUFREQ=y -CONFIG_ARM_PATCH_IDIV=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -# CONFIG_ARM_SMMU is not set -CONFIG_ARM_THUMB=y -CONFIG_ARM_THUMBEE=y -CONFIG_ARM_UNWIND=y -CONFIG_ARM_VIRT_EXT=y -CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y -CONFIG_ATAGS=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GPIO=y -CONFIG_BACKLIGHT_LED=y -CONFIG_BACKLIGHT_PWM=y -CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BLK_PM=y -CONFIG_BOUNCE=y -# CONFIG_CACHE_L2X0 is not set -CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y -CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" -CONFIG_CC_NO_ARRAY_BOUNDS=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE="earlyprintk console=ttyS0,115200 rootfstype=squashfs,jffs2" -CONFIG_CMDLINE_FROM_BOOTLOADER=y -# CONFIG_CMDLINE_OVERRIDE is not set -CONFIG_CMDLINE_PARTITION=y -CONFIG_COMMON_CLK=y -CONFIG_COMMON_CLK_MEDIATEK=y -CONFIG_COMMON_CLK_MT2701=y -CONFIG_COMMON_CLK_MT2701_AUDSYS=y -CONFIG_COMMON_CLK_MT2701_BDPSYS=y -CONFIG_COMMON_CLK_MT2701_ETHSYS=y -CONFIG_COMMON_CLK_MT2701_G3DSYS=y -CONFIG_COMMON_CLK_MT2701_HIFSYS=y -CONFIG_COMMON_CLK_MT2701_IMGSYS=y -CONFIG_COMMON_CLK_MT2701_MMSYS=y -CONFIG_COMMON_CLK_MT2701_VDECSYS=y -# CONFIG_COMMON_CLK_MT6795 is not set -# CONFIG_COMMON_CLK_MT7622 is not set -# CONFIG_COMMON_CLK_MT7629 is not set -# CONFIG_COMMON_CLK_MT7981 is not set -# CONFIG_COMMON_CLK_MT7986 is not set -# CONFIG_COMMON_CLK_MT7988 is not set -# CONFIG_COMMON_CLK_MT8135 is not set -# CONFIG_COMMON_CLK_MT8173 is not set -# CONFIG_COMMON_CLK_MT8365 is not set -# CONFIG_COMMON_CLK_MT8516 is not set -CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1 -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CONFIGFS_FS=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_CONTEXT_TRACKING=y -CONFIG_CONTEXT_TRACKING_IDLE=y -CONFIG_COREDUMP=y -# CONFIG_CPUFREQ_DT is not set -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_PM=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_SPECTRE=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -# CONFIG_CRC32_SARWATE is not set -CONFIG_CRC32_SLICEBY8=y -CONFIG_CROSS_MEMORY_ATTACH=y -CONFIG_CRYPTO_CRC32=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_DRBG=y -CONFIG_CRYPTO_DRBG_HMAC=y -CONFIG_CRYPTO_DRBG_MENU=y -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_JITTERENTROPY=y -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y -CONFIG_CRYPTO_LIB_SHA1=y -CONFIG_CRYPTO_LIB_SHA256=y -CONFIG_CRYPTO_LIB_UTILS=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=y -CONFIG_CRYPTO_SEQIV=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_ZSTD=y -CONFIG_CURRENT_POINTER_IN_TPIDRURO=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_ALIGN_RODATA=y -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_GPIO=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" -CONFIG_DEBUG_MISC=y -CONFIG_DEBUG_MT6589_UART0=y -# CONFIG_DEBUG_MT8127_UART0 is not set -# CONFIG_DEBUG_MT8135_UART3 is not set -CONFIG_DEBUG_PREEMPT=y -CONFIG_DEBUG_UART_8250=y -CONFIG_DEBUG_UART_8250_SHIFT=2 -CONFIG_DEBUG_UART_PHYS=0x11004000 -CONFIG_DEBUG_UART_VIRT=0xf1004000 -# CONFIG_DEVFREQ_GOV_PASSIVE is not set -# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set -# CONFIG_DEVFREQ_GOV_POWERSAVE is not set -CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y -# CONFIG_DEVFREQ_GOV_USERSPACE is not set -# CONFIG_DEVFREQ_THERMAL is not set -CONFIG_DIMLIB=y -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_OF=y -CONFIG_DMA_OPS=y -CONFIG_DMA_SHARED_BUFFER=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DRM=y -CONFIG_DRM_BRIDGE=y -CONFIG_DRM_DISPLAY_CONNECTOR=y -CONFIG_DRM_FBDEV_EMULATION=y -CONFIG_DRM_FBDEV_OVERALLOC=100 -CONFIG_DRM_GEM_DMA_HELPER=y -CONFIG_DRM_GEM_SHMEM_HELPER=y -CONFIG_DRM_KMS_HELPER=y -CONFIG_DRM_LIMA=y -CONFIG_DRM_LVDS_CODEC=y -CONFIG_DRM_MEDIATEK=y -# CONFIG_DRM_MEDIATEK_DP is not set -CONFIG_DRM_MEDIATEK_HDMI=y -CONFIG_DRM_MIPI_DSI=y -CONFIG_DRM_NOMODESET=y -CONFIG_DRM_PANEL=y -CONFIG_DRM_PANEL_BRIDGE=y -CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y -CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=y -CONFIG_DRM_SCHED=y -CONFIG_DRM_SIMPLE_BRIDGE=y -CONFIG_DTC=y -CONFIG_DUMMY_CONSOLE=y -CONFIG_EARLY_PRINTK=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EINT_MTK=y -CONFIG_ELF_CORE=y -CONFIG_EXCLUSIVE_SYSTEM_RAM=y -CONFIG_EXT4_FS=y -CONFIG_EXTCON=y -CONFIG_F2FS_FS=y -CONFIG_FB=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_CMDLINE=y -CONFIG_FB_DEFERRED_IO=y -CONFIG_FB_SYS_COPYAREA=y -CONFIG_FB_SYS_FILLRECT=y -CONFIG_FB_SYS_FOPS=y -CONFIG_FB_SYS_IMAGEBLIT=y -# CONFIG_FIT_PARTITION is not set -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FONT_8x16=y -CONFIG_FONT_8x8=y -CONFIG_FONT_SUPPORT=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_FRAME_WARN=1024 -CONFIG_FREEZER=y -CONFIG_FS_IOMAP=y -CONFIG_FS_MBCACHE=y -CONFIG_FWNODE_MDIO=y -CONFIG_FW_CACHE=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_FW_LOADER_SYSFS=y -CONFIG_GCC11_NO_ARRAY_BOUNDS=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_CPU_VULNERABILITIES=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_MIGRATION=y -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_VDSO_32=y -CONFIG_GPIO_CDEV=y -CONFIG_GRO_CELLS=y -# CONFIG_HARDEN_BRANCH_HISTORY is not set -# CONFIG_HARDEN_BRANCH_PREDICTOR is not set -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAVE_SMP=y -CONFIG_HDMI=y -CONFIG_HID=y -CONFIG_HIGHMEM=y -CONFIG_HIGHPTE=y -CONFIG_HOTPLUG_CPU=y -CONFIG_HWMON=y -CONFIG_HW_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_MTK=y -CONFIG_HZ_FIXED=0 -CONFIG_I2C=y -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MT65XX=y -CONFIG_ICPLUS_PHY=y -CONFIG_IIO=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INPUT=y -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_KEYBOARD=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_IOMMU_API=y -# CONFIG_IOMMU_DEBUGFS is not set -# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set -CONFIG_IOMMU_DEFAULT_DMA_STRICT=y -# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set -CONFIG_IOMMU_IO_PGTABLE=y -CONFIG_IOMMU_IO_PGTABLE_ARMV7S=y -# CONFIG_IOMMU_IO_PGTABLE_ARMV7S_SELFTEST is not set -# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set -CONFIG_IOMMU_SUPPORT=y -CONFIG_IRQCHIP=y -CONFIG_IRQSTACKS=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_JBD2=y -CONFIG_KALLSYMS=y -CONFIG_KCMP=y -# CONFIG_KEYBOARD_MT6779 is not set -CONFIG_KEYBOARD_MTK_PMIC=y -CONFIG_KMAP_LOCAL=y -CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_LCD_PLATFORM=y -CONFIG_LEDS_MT6323=y -# CONFIG_LEDS_QCOM_LPG is not set -# CONFIG_LEDS_SMARTRG_LED is not set -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -# CONFIG_MACH_MT2701 is not set -# CONFIG_MACH_MT6589 is not set -# CONFIG_MACH_MT6592 is not set -CONFIG_MACH_MT7623=y -# CONFIG_MACH_MT7629 is not set -# CONFIG_MACH_MT8127 is not set -# CONFIG_MACH_MT8135 is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_MAILBOX=y -# CONFIG_MAILBOX_TEST is not set -CONFIG_MDIO_BITBANG=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_DEVRES=y -CONFIG_MDIO_GPIO=y -CONFIG_MEDIATEK_GE_PHY=y -CONFIG_MEDIATEK_MT6577_AUXADC=y -CONFIG_MEDIATEK_WATCHDOG=y -CONFIG_MEMFD_CREATE=y -CONFIG_MEMORY=y -CONFIG_MFD_CORE=y -# CONFIG_MFD_HI6421_SPMI is not set -CONFIG_MFD_MT6397=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGRATION=y -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_CQHCI=y -CONFIG_MMC_MTK=y -CONFIG_MMC_SDHCI=y -# CONFIG_MMC_SDHCI_PCI is not set -CONFIG_MMC_SDHCI_PLTFM=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_NAND_ECC_MEDIATEK is not set -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_SPLIT_UIMAGE_FW=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -# CONFIG_MTK_ADSP_MBOX is not set -CONFIG_MTK_CMDQ=y -CONFIG_MTK_CMDQ_MBOX=y -CONFIG_MTK_CQDMA=y -# CONFIG_MTK_HSDMA is not set -CONFIG_MTK_INFRACFG=y -CONFIG_MTK_IOMMU=y -CONFIG_MTK_IOMMU_V1=y -CONFIG_MTK_MMSYS=y -CONFIG_MTK_PMIC_WRAP=y -CONFIG_MTK_SCPSYS=y -CONFIG_MTK_SCPSYS_PM_DOMAINS=y -CONFIG_MTK_SMI=y -# CONFIG_MTK_SVS is not set -CONFIG_MTK_THERMAL=y -CONFIG_MTK_SOC_THERMAL=y -# CONFIG_MTK_LVTS_THERMAL is not set -CONFIG_MTK_TIMER=y -# CONFIG_MTK_UART_APDMA is not set -# CONFIG_MUSB_PIO_ONLY is not set -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_NEON=y -CONFIG_NET_DEVLINK=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_MT7530=y -CONFIG_NET_DSA_MT7530_MDIO=y -# CONFIG_NET_DSA_MT7530_MMIO is not set -CONFIG_NET_DSA_TAG_MTK=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_MEDIATEK_SOC=y -CONFIG_NET_MEDIATEK_SOC_WED=y -CONFIG_NET_SELFTESTS=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NET_VENDOR_MEDIATEK=y -# CONFIG_NET_VENDOR_WIZNET is not set -CONFIG_NLS=y -CONFIG_NOP_USB_XCEIV=y -CONFIG_NO_HZ=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NR_CPUS=4 -CONFIG_NVMEM=y -CONFIG_NVMEM_MTK_EFUSE=y -# CONFIG_NVMEM_SPMI_SDAM is not set -CONFIG_NVMEM_SYSFS=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_DYNAMIC=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IOMMU=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OF_OVERLAY=y -CONFIG_OF_RESOLVE=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_PADATA=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PAGE_POOL=y -CONFIG_PAGE_POOL_STATS=y -CONFIG_PAGE_SIZE_LESS_THAN_256KB=y -CONFIG_PAGE_SIZE_LESS_THAN_64KB=y -CONFIG_PCI=y -CONFIG_PCIEAER=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCIE_MEDIATEK=y -CONFIG_PCIE_PME=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -CONFIG_PCS_MTK_LYNXI=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYLINK=y -# CONFIG_PHY_MTK_DP is not set -CONFIG_PHY_MTK_HDMI=y -CONFIG_PHY_MTK_MIPI_DSI=y -# CONFIG_PHY_MTK_PCIE is not set -CONFIG_PHY_MTK_TPHY=y -# CONFIG_PHY_MTK_UFS is not set -# CONFIG_PHY_MTK_XSPHY is not set -CONFIG_PINCTRL=y -CONFIG_PINCTRL_MT2701=y -# CONFIG_PINCTRL_MT6397 is not set -CONFIG_PINCTRL_MT7623=y -CONFIG_PINCTRL_MTK=y -CONFIG_PINCTRL_MTK_MOORE=y -CONFIG_PINCTRL_MTK_V2=y -CONFIG_PM=y -CONFIG_PM_CLK=y -CONFIG_PM_DEVFREQ=y -# CONFIG_PM_DEVFREQ_EVENT is not set -CONFIG_PM_GENERIC_DOMAINS=y -CONFIG_PM_GENERIC_DOMAINS_OF=y -CONFIG_PM_GENERIC_DOMAINS_SLEEP=y -CONFIG_PM_OPP=y -CONFIG_PM_SLEEP=y -CONFIG_PM_SLEEP_SMP=y -CONFIG_POWER_RESET=y -# CONFIG_POWER_RESET_MT6323 is not set -CONFIG_POWER_SUPPLY=y -CONFIG_POWER_SUPPLY_HWMON=y -CONFIG_PREEMPT=y -CONFIG_PREEMPTION=y -CONFIG_PREEMPT_BUILD=y -CONFIG_PREEMPT_COUNT=y -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_RCU=y -CONFIG_PRINTK_TIME=y -CONFIG_PTP_1588_CLOCK_OPTIONAL=y -CONFIG_PWM=y -CONFIG_PWM_MEDIATEK=y -# CONFIG_PWM_MTK_DISP is not set -CONFIG_PWM_SYSFS=y -CONFIG_RANDSTRUCT_NONE=y -CONFIG_RAS=y -CONFIG_RATIONAL=y -CONFIG_REGMAP=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_GPIO=y -CONFIG_REGULATOR_MT6323=y -# CONFIG_REGULATOR_MT6331 is not set -# CONFIG_REGULATOR_MT6332 is not set -# CONFIG_REGULATOR_MT6358 is not set -# CONFIG_REGULATOR_MT6380 is not set -# CONFIG_REGULATOR_MT6397 is not set -# CONFIG_REGULATOR_QCOM_LABIBB is not set -# CONFIG_REGULATOR_QCOM_SPMI is not set -# CONFIG_REGULATOR_QCOM_USB_VBUS is not set -CONFIG_RESET_CONTROLLER=y -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_DRV_MT6397 is not set -# CONFIG_RTC_DRV_MT7622 is not set -CONFIG_RTC_I2C_AND_SPI=y -CONFIG_RTC_MC146818_LIB=y -# CONFIG_RTL8367S_GSW is not set -CONFIG_RWSEM_SPIN_ON_OWNER=y -# CONFIG_SERIAL_8250_DMA is not set -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_8250_MT6577=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SGL_ALLOC=y -CONFIG_SMP=y -# CONFIG_SMP_ON_UP is not set -CONFIG_SOCK_RX_QUEUE_MAPPING=y -CONFIG_SOFTIRQ_ON_OWN_STACK=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_DYNAMIC=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SPI_MT65XX=y -# CONFIG_SPI_MTK_NOR is not set -CONFIG_SPMI=y -# CONFIG_SPMI_HISI3670 is not set -# CONFIG_SPMI_MTK_PMIF is not set -CONFIG_SRCU=y -# CONFIG_STRIP_ASM_SYMS is not set -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -CONFIG_SWPHY=y -CONFIG_SWP_EMULATE=y -CONFIG_SYNC_FILE=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_OF=y -CONFIG_THREAD_INFO_IN_TASK=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TOUCHSCREEN_EDT_FT5X06=y -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -# CONFIG_UACCE is not set -CONFIG_UBIFS_FS=y -CONFIG_UEVENT_HELPER_PATH="" -CONFIG_UIMAGE_FIT_BLK=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_UNINLINE_SPIN_UNLOCK=y -CONFIG_UNWINDER_ARM=y -CONFIG_USB=y -CONFIG_USB_COMMON=y -CONFIG_USB_F_ACM=y -CONFIG_USB_F_ECM=y -CONFIG_USB_F_MASS_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_GPIO_VBUS=y -CONFIG_USB_G_MULTI=y -CONFIG_USB_G_MULTI_CDC=y -# CONFIG_USB_G_MULTI_RNDIS is not set -CONFIG_USB_HID=y -CONFIG_USB_HIDDEV=y -CONFIG_USB_INVENTRA_DMA=y -CONFIG_USB_LIBCOMPOSITE=y -CONFIG_USB_MUSB_DUAL_ROLE=y -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_MUSB_MEDIATEK=y -CONFIG_USB_OTG=y -CONFIG_USB_PHY=y -CONFIG_USB_ROLE_SWITCH=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_U_ETHER=y -CONFIG_USB_U_SERIAL=y -CONFIG_USE_OF=y -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_VIDEOMODE_HELPERS=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_CONSOLE_SLEEP=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_WATCHDOG_CORE=y -CONFIG_XPS=y -CONFIG_XXHASH=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZSTD_COMMON=y -CONFIG_ZSTD_COMPRESS=y -CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/mediatek/mt7629/config-6.1 b/target/linux/mediatek/mt7629/config-6.1 deleted file mode 100644 index 5a15286c468..00000000000 --- a/target/linux/mediatek/mt7629/config-6.1 +++ /dev/null @@ -1,353 +0,0 @@ -# CONFIG_AIROHA_EN8801SC_PHY is not set -CONFIG_ALIGNMENT_TRAP=y -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_FORCE_MAX_ORDER=11 -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_ARCH_MEDIATEK=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARM=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -CONFIG_ARM_GIC=y -CONFIG_ARM_HAS_GROUP_RELOCS=y -CONFIG_ARM_HEAVY_MB=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -CONFIG_ARM_PATCH_IDIV=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_THUMB=y -CONFIG_ARM_UNWIND=y -CONFIG_ARM_VIRT_EXT=y -CONFIG_ATAGS=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BLK_PM=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_CACHE_L2X0=y -CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y -CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" -CONFIG_CC_NO_ARRAY_BOUNDS=y -# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CHR_DEV_SCH=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE="rootfstype=squashfs,jffs2" -CONFIG_CMDLINE_FROM_BOOTLOADER=y -CONFIG_CMDLINE_OVERRIDE=y -CONFIG_COMMON_CLK=y -CONFIG_COMMON_CLK_MEDIATEK=y -# CONFIG_COMMON_CLK_MT2701 is not set -# CONFIG_COMMON_CLK_MT6795 is not set -# CONFIG_COMMON_CLK_MT7622 is not set -CONFIG_COMMON_CLK_MT7629=y -CONFIG_COMMON_CLK_MT7629_ETHSYS=y -CONFIG_COMMON_CLK_MT7629_HIFSYS=y -# CONFIG_COMMON_CLK_MT7981 is not set -# CONFIG_COMMON_CLK_MT7986 is not set -# CONFIG_COMMON_CLK_MT7988 is not set -# CONFIG_COMMON_CLK_MT8135 is not set -# CONFIG_COMMON_CLK_MT8173 is not set -# CONFIG_COMMON_CLK_MT8365 is not set -# CONFIG_COMMON_CLK_MT8516 is not set -CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1 -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CONTEXT_TRACKING=y -CONFIG_CONTEXT_TRACKING_IDLE=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_MENU=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_PM=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_SPECTRE=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y -CONFIG_CRYPTO_LIB_SHA1=y -CONFIG_CRYPTO_LIB_UTILS=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_ZSTD=y -CONFIG_CURRENT_POINTER_IN_TPIDRURO=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -CONFIG_DEBUG_MISC=y -CONFIG_DEFAULT_HOSTNAME="(mt7629)" -CONFIG_DIMLIB=y -CONFIG_DMA_OPS=y -CONFIG_DTC=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EINT_MTK=y -CONFIG_EXCLUSIVE_SYSTEM_RAM=y -# CONFIG_FIT_PARTITION is not set -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FRAME_WARN=1024 -CONFIG_FWNODE_MDIO=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_FW_LOADER_SYSFS=y -CONFIG_GCC11_NO_ARRAY_BOUNDS=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ARCH_TOPOLOGY=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_CPU_VULNERABILITIES=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_MIGRATION=y -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_VDSO_32=y -CONFIG_GPIO_CDEV=y -CONFIG_GRO_CELLS=y -# CONFIG_HARDEN_BRANCH_HISTORY is not set -# CONFIG_HARDEN_BRANCH_PREDICTOR is not set -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAVE_SMP=y -CONFIG_HOTPLUG_CPU=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_MTK=y -CONFIG_HZ_FIXED=0 -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQSTACKS=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_TIME_ACCOUNTING=y -CONFIG_IRQ_WORK=y -# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set -CONFIG_LIBFDT=y -# CONFIG_LEDS_SMARTRG_LED is not set -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -# CONFIG_MACH_MT2701 is not set -# CONFIG_MACH_MT6589 is not set -# CONFIG_MACH_MT6592 is not set -# CONFIG_MACH_MT7623 is not set -CONFIG_MACH_MT7629=y -# CONFIG_MACH_MT8127 is not set -# CONFIG_MACH_MT8135 is not set -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_DEVRES=y -CONFIG_MEDIATEK_GE_PHY=y -CONFIG_MEDIATEK_WATCHDOG=y -CONFIG_MEMFD_CREATE=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGRATION=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_NAND_CORE=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_ECC_MEDIATEK=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=y -CONFIG_MTD_NAND_MTK_BMT=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_SPI_NAND=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_SPLIT_FIT_FW=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -# CONFIG_MTK_CMDQ is not set -CONFIG_MTK_INFRACFG=y -# CONFIG_MTK_PMIC_WRAP is not set -CONFIG_MTK_SCPSYS=y -CONFIG_MTK_SCPSYS_PM_DOMAINS=y -CONFIG_MTK_TIMER=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NETFILTER=y -CONFIG_NET_DEVLINK=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_MT7530=y -CONFIG_NET_DSA_MT7530_MDIO=y -# CONFIG_NET_DSA_MT7530_MMIO is not set -CONFIG_NET_DSA_TAG_MTK=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_MEDIATEK_SOC=y -CONFIG_NET_MEDIATEK_SOC_WED=y -CONFIG_NET_SELFTESTS=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NET_VENDOR_MEDIATEK=y -CONFIG_NLS=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NR_CPUS=2 -CONFIG_NVMEM=y -# CONFIG_NVMEM_MTK_EFUSE is not set -CONFIG_NVMEM_SYSFS=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_PADATA=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PAGE_POOL=y -CONFIG_PAGE_POOL_STATS=y -CONFIG_PAGE_SIZE_LESS_THAN_256KB=y -CONFIG_PAGE_SIZE_LESS_THAN_64KB=y -CONFIG_PCI=y -CONFIG_PCIEAER=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCIE_MEDIATEK=y -CONFIG_PCIE_PME=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -CONFIG_PCS_MTK_LYNXI=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYLINK=y -# CONFIG_PHY_MTK_DP is not set -# CONFIG_PHY_MTK_PCIE is not set -CONFIG_PHY_MTK_TPHY=y -# CONFIG_PHY_MTK_UFS is not set -# CONFIG_PHY_MTK_XSPHY is not set -CONFIG_PINCTRL=y -CONFIG_PINCTRL_MT7629=y -CONFIG_PINCTRL_MTK_MOORE=y -CONFIG_PINCTRL_MTK_V2=y -CONFIG_PM=y -CONFIG_PM_CLK=y -CONFIG_PM_GENERIC_DOMAINS=y -CONFIG_PM_GENERIC_DOMAINS_OF=y -CONFIG_PREEMPT_NONE_BUILD=y -CONFIG_PTP_1588_CLOCK_OPTIONAL=y -CONFIG_PWM=y -CONFIG_PWM_MEDIATEK=y -# CONFIG_PWM_MTK_DISP is not set -CONFIG_PWM_SYSFS=y -CONFIG_RANDSTRUCT_NONE=y -CONFIG_RAS=y -CONFIG_RATIONAL=y -CONFIG_REGMAP=y -CONFIG_REGMAP_MMIO=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -# CONFIG_RTL8367S_GSW is not set -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_SCSI=y -CONFIG_SCSI_COMMON=y -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_8250_MT6577=y -CONFIG_SERIAL_8250_NR_UARTS=3 -CONFIG_SERIAL_8250_RUNTIME_UARTS=3 -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SGL_ALLOC=y -CONFIG_SG_POOL=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SOCK_RX_QUEUE_MAPPING=y -CONFIG_SOFTIRQ_ON_OWN_STACK=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SPI_MT65XX=y -CONFIG_SPI_MTK_NOR=y -CONFIG_SPI_MTK_SNFI=y -CONFIG_SRCU=y -CONFIG_STACKTRACE=y -# CONFIG_SWAP is not set -CONFIG_SWCONFIG=y -CONFIG_SWPHY=y -CONFIG_SWP_EMULATE=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_THREAD_INFO_IN_TASK=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -CONFIG_UBIFS_FS=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_UNWINDER_ARM=y -CONFIG_USB=y -CONFIG_USB_COMMON=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_MTK=y -# CONFIG_USB_XHCI_PLATFORM is not set -CONFIG_USE_OF=y -# CONFIG_VFP is not set -CONFIG_WATCHDOG_CORE=y -# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set -CONFIG_XPS=y -CONFIG_XXHASH=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZSTD_COMMON=y -CONFIG_ZSTD_COMPRESS=y -CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/mediatek/patches-6.1/000-v6.2-kbuild-Allow-DTB-overlays-to-built-from-.dtso-named-.patch b/target/linux/mediatek/patches-6.1/000-v6.2-kbuild-Allow-DTB-overlays-to-built-from-.dtso-named-.patch deleted file mode 100644 index 17c5c6098aa..00000000000 --- a/target/linux/mediatek/patches-6.1/000-v6.2-kbuild-Allow-DTB-overlays-to-built-from-.dtso-named-.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 363547d2191cbc32ca954ba75d72908712398ff2 Mon Sep 17 00:00:00 2001 -From: Andrew Davis -Date: Mon, 24 Oct 2022 12:34:28 -0500 -Subject: [PATCH] kbuild: Allow DTB overlays to built from .dtso named source - files - -Currently DTB Overlays (.dtbo) are build from source files with the same -extension (.dts) as the base DTs (.dtb). This may become confusing and -even lead to wrong results. For example, a composite DTB (created from a -base DTB and a set of overlays) might have the same name as one of the -overlays that create it. - -Different files should be generated from differently named sources. - .dtb <-> .dts - .dtbo <-> .dtso - -We do not remove the ability to compile DTBO files from .dts files here, -only add a new rule allowing the .dtso file name. The current .dts named -overlays can be renamed with time. After all have been renamed we can -remove the other rule. - -Signed-off-by: Andrew Davis -Reviewed-by: Geert Uytterhoeven -Tested-by: Geert Uytterhoeven -Reviewed-by: Frank Rowand -Tested-by: Frank Rowand -Link: https://lore.kernel.org/r/20221024173434.32518-2-afd@ti.com -Signed-off-by: Rob Herring ---- - scripts/Makefile.lib | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/scripts/Makefile.lib -+++ b/scripts/Makefile.lib -@@ -408,6 +408,9 @@ $(obj)/%.dtb: $(src)/%.dts $(DTC) $(DT_T - $(obj)/%.dtbo: $(src)/%.dts $(DTC) FORCE - $(call if_changed_dep,dtc) - -+$(obj)/%.dtbo: $(src)/%.dtso $(DTC) FORCE -+ $(call if_changed_dep,dtc) -+ - dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp) - - # Bzip2 diff --git a/target/linux/mediatek/patches-6.1/001-v6.2-arm64-dts-mediatek-mt7986-add-support-for-RX-Wireles.patch b/target/linux/mediatek/patches-6.1/001-v6.2-arm64-dts-mediatek-mt7986-add-support-for-RX-Wireles.patch deleted file mode 100644 index e6c6eb61661..00000000000 --- a/target/linux/mediatek/patches-6.1/001-v6.2-arm64-dts-mediatek-mt7986-add-support-for-RX-Wireles.patch +++ /dev/null @@ -1,106 +0,0 @@ -From 2c4daed9580164522859fa100128be408cc69be2 Mon Sep 17 00:00:00 2001 -From: Lorenzo Bianconi -Date: Sat, 5 Nov 2022 23:36:16 +0100 -Subject: [PATCH 01/19] arm64: dts: mediatek: mt7986: add support for RX - Wireless Ethernet Dispatch - -Similar to TX Wireless Ethernet Dispatch, introduce RX Wireless Ethernet -Dispatch to offload traffic received by the wlan interface to lan/wan -one. - -Co-developed-by: Sujuan Chen -Signed-off-by: Sujuan Chen -Signed-off-by: Lorenzo Bianconi -Signed-off-by: David S. Miller ---- - arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 65 +++++++++++++++++++++++ - 1 file changed, 65 insertions(+) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -@@ -76,6 +76,47 @@ - no-map; - reg = <0 0x4fc00000 0 0x00100000>; - }; -+ -+ wo_emi0: wo-emi@4fd00000 { -+ reg = <0 0x4fd00000 0 0x40000>; -+ no-map; -+ }; -+ -+ wo_emi1: wo-emi@4fd40000 { -+ reg = <0 0x4fd40000 0 0x40000>; -+ no-map; -+ }; -+ -+ wo_ilm0: wo-ilm@151e0000 { -+ reg = <0 0x151e0000 0 0x8000>; -+ no-map; -+ }; -+ -+ wo_ilm1: wo-ilm@151f0000 { -+ reg = <0 0x151f0000 0 0x8000>; -+ no-map; -+ }; -+ -+ wo_data: wo-data@4fd80000 { -+ reg = <0 0x4fd80000 0 0x240000>; -+ no-map; -+ }; -+ -+ wo_dlm0: wo-dlm@151e8000 { -+ reg = <0 0x151e8000 0 0x2000>; -+ no-map; -+ }; -+ -+ wo_dlm1: wo-dlm@151f8000 { -+ reg = <0 0x151f8000 0 0x2000>; -+ no-map; -+ }; -+ -+ wo_boot: wo-boot@15194000 { -+ reg = <0 0x15194000 0 0x1000>; -+ no-map; -+ }; -+ - }; - - timer { -@@ -240,6 +281,11 @@ - reg = <0 0x15010000 0 0x1000>; - interrupt-parent = <&gic>; - interrupts = ; -+ memory-region = <&wo_emi0>, <&wo_ilm0>, <&wo_dlm0>, -+ <&wo_data>, <&wo_boot>; -+ memory-region-names = "wo-emi", "wo-ilm", "wo-dlm", -+ "wo-data", "wo-boot"; -+ mediatek,wo-ccif = <&wo_ccif0>; - }; - - wed1: wed@15011000 { -@@ -248,6 +294,25 @@ - reg = <0 0x15011000 0 0x1000>; - interrupt-parent = <&gic>; - interrupts = ; -+ memory-region = <&wo_emi1>, <&wo_ilm1>, <&wo_dlm1>, -+ <&wo_data>, <&wo_boot>; -+ memory-region-names = "wo-emi", "wo-ilm", "wo-dlm", -+ "wo-data", "wo-boot"; -+ mediatek,wo-ccif = <&wo_ccif1>; -+ }; -+ -+ wo_ccif0: syscon@151a5000 { -+ compatible = "mediatek,mt7986-wo-ccif", "syscon"; -+ reg = <0 0x151a5000 0 0x1000>; -+ interrupt-parent = <&gic>; -+ interrupts = ; -+ }; -+ -+ wo_ccif1: syscon@151ad000 { -+ compatible = "mediatek,mt7986-wo-ccif", "syscon"; -+ reg = <0 0x151ad000 0 0x1000>; -+ interrupt-parent = <&gic>; -+ interrupts = ; - }; - - eth: ethernet@15100000 { diff --git a/target/linux/mediatek/patches-6.1/002-v6.2-arm64-dts-mt7986-harmonize-device-node-order.patch b/target/linux/mediatek/patches-6.1/002-v6.2-arm64-dts-mt7986-harmonize-device-node-order.patch deleted file mode 100644 index b5091687a33..00000000000 --- a/target/linux/mediatek/patches-6.1/002-v6.2-arm64-dts-mt7986-harmonize-device-node-order.patch +++ /dev/null @@ -1,166 +0,0 @@ -From 438e53828c08cf0e8a65b61cf6ce1e4b6620551a Mon Sep 17 00:00:00 2001 -From: Sam Shih -Date: Sun, 6 Nov 2022 09:50:24 +0100 -Subject: [PATCH 02/19] arm64: dts: mt7986: harmonize device node order - -This arrange device tree nodes in alphabetical order. - -Signed-off-by: Sam Shih -Signed-off-by: Frank Wunderlich -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20221106085034.12582-2-linux@fw-web.de -Signed-off-by: Matthias Brugger ---- - arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 94 ++++++++++---------- - arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 22 ++--- - 2 files changed, 58 insertions(+), 58 deletions(-) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts -@@ -54,6 +54,53 @@ - }; - }; - -+&pio { -+ uart1_pins: uart1-pins { -+ mux { -+ function = "uart"; -+ groups = "uart1"; -+ }; -+ }; -+ -+ uart2_pins: uart2-pins { -+ mux { -+ function = "uart"; -+ groups = "uart2"; -+ }; -+ }; -+ -+ wf_2g_5g_pins: wf-2g-5g-pins { -+ mux { -+ function = "wifi"; -+ groups = "wf_2g", "wf_5g"; -+ }; -+ conf { -+ pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", -+ "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", -+ "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", -+ "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", -+ "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", -+ "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", -+ "WF1_TOP_CLK", "WF1_TOP_DATA"; -+ drive-strength = <4>; -+ }; -+ }; -+ -+ wf_dbdc_pins: wf-dbdc-pins { -+ mux { -+ function = "wifi"; -+ groups = "wf_dbdc"; -+ }; -+ conf { -+ pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", -+ "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", -+ "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", -+ "WF0_TOP_CLK", "WF0_TOP_DATA"; -+ drive-strength = <4>; -+ }; -+ }; -+}; -+ - &switch { - ports { - #address-cells = <1>; -@@ -121,50 +168,3 @@ - pinctrl-0 = <&wf_2g_5g_pins>; - pinctrl-1 = <&wf_dbdc_pins>; - }; -- --&pio { -- uart1_pins: uart1-pins { -- mux { -- function = "uart"; -- groups = "uart1"; -- }; -- }; -- -- uart2_pins: uart2-pins { -- mux { -- function = "uart"; -- groups = "uart2"; -- }; -- }; -- -- wf_2g_5g_pins: wf-2g-5g-pins { -- mux { -- function = "wifi"; -- groups = "wf_2g", "wf_5g"; -- }; -- conf { -- pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", -- "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", -- "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", -- "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", -- "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", -- "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", -- "WF1_TOP_CLK", "WF1_TOP_DATA"; -- drive-strength = <4>; -- }; -- }; -- -- wf_dbdc_pins: wf-dbdc-pins { -- mux { -- function = "wifi"; -- groups = "wf_dbdc"; -- }; -- conf { -- pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", -- "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", -- "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", -- "WF0_TOP_CLK", "WF0_TOP_DATA"; -- drive-strength = <4>; -- }; -- }; --}; ---- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts -@@ -25,10 +25,6 @@ - }; - }; - --&uart0 { -- status = "okay"; --}; -- - ð { - status = "okay"; - -@@ -99,13 +95,6 @@ - }; - }; - --&wifi { -- status = "okay"; -- pinctrl-names = "default", "dbdc"; -- pinctrl-0 = <&wf_2g_5g_pins>; -- pinctrl-1 = <&wf_dbdc_pins>; --}; -- - &pio { - wf_2g_5g_pins: wf-2g-5g-pins { - mux { -@@ -138,3 +127,14 @@ - }; - }; - }; -+ -+&uart0 { -+ status = "okay"; -+}; -+ -+&wifi { -+ status = "okay"; -+ pinctrl-names = "default", "dbdc"; -+ pinctrl-0 = <&wf_2g_5g_pins>; -+ pinctrl-1 = <&wf_dbdc_pins>; -+}; diff --git a/target/linux/mediatek/patches-6.1/003-v6.2-arm64-dts-mt7986-add-crypto-related-device-nodes.patch b/target/linux/mediatek/patches-6.1/003-v6.2-arm64-dts-mt7986-add-crypto-related-device-nodes.patch deleted file mode 100644 index fec048e68ec..00000000000 --- a/target/linux/mediatek/patches-6.1/003-v6.2-arm64-dts-mt7986-add-crypto-related-device-nodes.patch +++ /dev/null @@ -1,68 +0,0 @@ -From ffb05357b47f06b2b4d1e14ba89169e28feb727b Mon Sep 17 00:00:00 2001 -From: Sam Shih -Date: Sun, 6 Nov 2022 09:50:27 +0100 -Subject: [PATCH 03/19] arm64: dts: mt7986: add crypto related device nodes - -This patch adds crypto engine support for MT7986. - -Signed-off-by: Vic Wu -Signed-off-by: Sam Shih -Signed-off-by: Frank Wunderlich -Link: https://lore.kernel.org/r/20221106085034.12582-5-linux@fw-web.de -Signed-off-by: Matthias Brugger ---- - arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 4 ++++ - arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 15 +++++++++++++++ - arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 4 ++++ - 3 files changed, 23 insertions(+) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts -@@ -25,6 +25,10 @@ - }; - }; - -+&crypto { -+ status = "okay"; -+}; -+ - ð { - status = "okay"; - ---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -@@ -224,6 +224,21 @@ - status = "disabled"; - }; - -+ crypto: crypto@10320000 { -+ compatible = "inside-secure,safexcel-eip97"; -+ reg = <0 0x10320000 0 0x40000>; -+ interrupts = , -+ , -+ , -+ ; -+ interrupt-names = "ring0", "ring1", "ring2", "ring3"; -+ clocks = <&infracfg CLK_INFRA_EIP97_CK>; -+ clock-names = "infra_eip97_ck"; -+ assigned-clocks = <&topckgen CLK_TOP_EIP_B_SEL>; -+ assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>; -+ status = "disabled"; -+ }; -+ - uart0: serial@11002000 { - compatible = "mediatek,mt7986-uart", - "mediatek,mt6577-uart"; ---- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts -@@ -25,6 +25,10 @@ - }; - }; - -+&crypto { -+ status = "okay"; -+}; -+ - ð { - status = "okay"; - diff --git a/target/linux/mediatek/patches-6.1/004-v6.2-arm64-dts-mt7986-add-i2c-node.patch b/target/linux/mediatek/patches-6.1/004-v6.2-arm64-dts-mt7986-add-i2c-node.patch deleted file mode 100644 index 132940915b8..00000000000 --- a/target/linux/mediatek/patches-6.1/004-v6.2-arm64-dts-mt7986-add-i2c-node.patch +++ /dev/null @@ -1,37 +0,0 @@ -From b49b7dc404ded1d89cbc568d875009a5c1ed4ef6 Mon Sep 17 00:00:00 2001 -From: Frank Wunderlich -Date: Sun, 6 Nov 2022 09:50:29 +0100 -Subject: [PATCH 04/19] arm64: dts: mt7986: add i2c node - -Add i2c Node to mt7986 devicetree. - -Signed-off-by: Frank Wunderlich -Link: https://lore.kernel.org/r/20221106085034.12582-7-linux@fw-web.de -Signed-off-by: Matthias Brugger ---- - arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 14 ++++++++++++++ - 1 file changed, 14 insertions(+) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -@@ -280,6 +280,20 @@ - status = "disabled"; - }; - -+ i2c0: i2c@11008000 { -+ compatible = "mediatek,mt7986-i2c"; -+ reg = <0 0x11008000 0 0x90>, -+ <0 0x10217080 0 0x80>; -+ interrupts = ; -+ clock-div = <5>; -+ clocks = <&infracfg CLK_INFRA_I2C0_CK>, -+ <&infracfg CLK_INFRA_AP_DMA_CK>; -+ clock-names = "main", "dma"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ - ethsys: syscon@15000000 { - #address-cells = <1>; - #size-cells = <1>; diff --git a/target/linux/mediatek/patches-6.1/005-v6.2-arm64-dts-mediatek-mt7986-Add-SoC-compatible.patch b/target/linux/mediatek/patches-6.1/005-v6.2-arm64-dts-mediatek-mt7986-Add-SoC-compatible.patch deleted file mode 100644 index 8201b47df61..00000000000 --- a/target/linux/mediatek/patches-6.1/005-v6.2-arm64-dts-mediatek-mt7986-Add-SoC-compatible.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 2cd6022800d6da7822e169f3e6f7f790c1431445 Mon Sep 17 00:00:00 2001 -From: Matthias Brugger -Date: Mon, 14 Nov 2022 13:16:53 +0100 -Subject: [PATCH 05/19] arm64: dts: mediatek: mt7986: Add SoC compatible - -Missing SoC compatible in the board file causes dt bindings check. - -Signed-off-by: Matthias Brugger -Link: https://lore.kernel.org/r/20221114121653.14739-1-matthias.bgg@kernel.org -Signed-off-by: Matthias Brugger ---- - arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 2 +- - arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 1 + - arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 2 +- - arch/arm64/boot/dts/mediatek/mt7986b.dtsi | 3 +++ - 4 files changed, 6 insertions(+), 2 deletions(-) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts -@@ -9,7 +9,7 @@ - - / { - model = "MediaTek MT7986a RFB"; -- compatible = "mediatek,mt7986a-rfb"; -+ compatible = "mediatek,mt7986a-rfb", "mediatek,mt7986a"; - - aliases { - serial0 = &uart0; ---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -@@ -10,6 +10,7 @@ - #include - - / { -+ compatible = "mediatek,mt7986a"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; ---- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts -@@ -9,7 +9,7 @@ - - / { - model = "MediaTek MT7986b RFB"; -- compatible = "mediatek,mt7986b-rfb"; -+ compatible = "mediatek,mt7986b-rfb", "mediatek,mt7986b"; - - aliases { - serial0 = &uart0; ---- a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi -@@ -5,6 +5,9 @@ - */ - - #include "mt7986a.dtsi" -+/ { -+ compatible = "mediatek,mt7986b"; -+}; - - &pio { - compatible = "mediatek,mt7986b-pinctrl"; diff --git a/target/linux/mediatek/patches-6.1/006-v6.2-arm64-dts-mt7986-add-spi-related-device-nodes.patch b/target/linux/mediatek/patches-6.1/006-v6.2-arm64-dts-mt7986-add-spi-related-device-nodes.patch deleted file mode 100644 index c45f183dc71..00000000000 --- a/target/linux/mediatek/patches-6.1/006-v6.2-arm64-dts-mt7986-add-spi-related-device-nodes.patch +++ /dev/null @@ -1,157 +0,0 @@ -From f4029538f063a845dc9aae46cce4cf386e6253a5 Mon Sep 17 00:00:00 2001 -From: Sam Shih -Date: Fri, 18 Nov 2022 20:01:21 +0100 -Subject: [PATCH 06/19] arm64: dts: mt7986: add spi related device nodes - -This patch adds spi support for MT7986. - -Signed-off-by: Sam Shih -Signed-off-by: Frank Wunderlich -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20221118190126.100895-7-linux@fw-web.de -Signed-off-by: Matthias Brugger ---- - arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 35 ++++++++++++++++++++ - arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 28 ++++++++++++++++ - arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 35 ++++++++++++++++++++ - 3 files changed, 98 insertions(+) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts -@@ -59,6 +59,20 @@ - }; - - &pio { -+ spi_flash_pins: spi-flash-pins { -+ mux { -+ function = "spi"; -+ groups = "spi0", "spi0_wp_hold"; -+ }; -+ }; -+ -+ spic_pins: spic-pins { -+ mux { -+ function = "spi"; -+ groups = "spi1_2"; -+ }; -+ }; -+ - uart1_pins: uart1-pins { - mux { - function = "uart"; -@@ -105,6 +119,27 @@ - }; - }; - -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi_flash_pins>; -+ cs-gpios = <0>, <0>; -+ status = "okay"; -+ spi_nand: spi_nand@0 { -+ compatible = "spi-nand"; -+ reg = <0>; -+ spi-max-frequency = <10000000>; -+ spi-tx-bus-width = <4>; -+ spi-rx-bus-width = <4>; -+ }; -+}; -+ -+&spi1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spic_pins>; -+ cs-gpios = <0>, <0>; -+ status = "okay"; -+}; -+ - &switch { - ports { - #address-cells = <1>; ---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -@@ -295,6 +295,34 @@ - status = "disabled"; - }; - -+ spi0: spi@1100a000 { -+ compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0 0x1100a000 0 0x100>; -+ interrupts = ; -+ clocks = <&topckgen CLK_TOP_MPLL_D2>, -+ <&topckgen CLK_TOP_SPI_SEL>, -+ <&infracfg CLK_INFRA_SPI0_CK>, -+ <&infracfg CLK_INFRA_SPI0_HCK_CK>; -+ clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk"; -+ status = "disabled"; -+ }; -+ -+ spi1: spi@1100b000 { -+ compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0 0x1100b000 0 0x100>; -+ interrupts = ; -+ clocks = <&topckgen CLK_TOP_MPLL_D2>, -+ <&topckgen CLK_TOP_SPIM_MST_SEL>, -+ <&infracfg CLK_INFRA_SPI1_CK>, -+ <&infracfg CLK_INFRA_SPI1_HCK_CK>; -+ clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk"; -+ status = "disabled"; -+ }; -+ - ethsys: syscon@15000000 { - #address-cells = <1>; - #size-cells = <1>; ---- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts -@@ -100,6 +100,20 @@ - }; - - &pio { -+ spi_flash_pins: spi-flash-pins { -+ mux { -+ function = "spi"; -+ groups = "spi0", "spi0_wp_hold"; -+ }; -+ }; -+ -+ spic_pins: spic-pins { -+ mux { -+ function = "spi"; -+ groups = "spi1_2"; -+ }; -+ }; -+ - wf_2g_5g_pins: wf-2g-5g-pins { - mux { - function = "wifi"; -@@ -132,6 +146,27 @@ - }; - }; - -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi_flash_pins>; -+ cs-gpios = <0>, <0>; -+ status = "okay"; -+ spi_nand: spi_nand@0 { -+ compatible = "spi-nand"; -+ reg = <0>; -+ spi-max-frequency = <10000000>; -+ spi-tx-bus-width = <4>; -+ spi-rx-bus-width = <4>; -+ }; -+}; -+ -+&spi1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spic_pins>; -+ cs-gpios = <0>, <0>; -+ status = "okay"; -+}; -+ - &uart0 { - status = "okay"; - }; diff --git a/target/linux/mediatek/patches-6.1/007-v6.3-arm64-dts-mt7986-add-usb-related-device-nodes.patch b/target/linux/mediatek/patches-6.1/007-v6.3-arm64-dts-mt7986-add-usb-related-device-nodes.patch deleted file mode 100644 index 603f33b150b..00000000000 --- a/target/linux/mediatek/patches-6.1/007-v6.3-arm64-dts-mt7986-add-usb-related-device-nodes.patch +++ /dev/null @@ -1,127 +0,0 @@ -From 9e8e24ab716098e617195ce29b88e84608bf2108 Mon Sep 17 00:00:00 2001 -From: Sam Shih -Date: Fri, 6 Jan 2023 16:28:42 +0100 -Subject: [PATCH 07/19] arm64: dts: mt7986: add usb related device nodes - -This patch adds USB support for MT7986. - -Signed-off-by: Sam Shih -Signed-off-by: Frank Wunderlich -Reviewed-by: Chunfeng Yun -Link: https://lore.kernel.org/r/20230106152845.88717-3-linux@fw-web.de -Signed-off-by: Matthias Brugger ---- - arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 8 +++ - arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 55 ++++++++++++++++++++ - arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 8 +++ - 3 files changed, 71 insertions(+) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts -@@ -140,6 +140,10 @@ - status = "okay"; - }; - -+&ssusb { -+ status = "okay"; -+}; -+ - &switch { - ports { - #address-cells = <1>; -@@ -201,6 +205,10 @@ - status = "okay"; - }; - -+&usb_phy { -+ status = "okay"; -+}; -+ - &wifi { - status = "okay"; - pinctrl-names = "default", "dbdc"; ---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -@@ -323,6 +323,61 @@ - status = "disabled"; - }; - -+ ssusb: usb@11200000 { -+ compatible = "mediatek,mt7986-xhci", -+ "mediatek,mtk-xhci"; -+ reg = <0 0x11200000 0 0x2e00>, -+ <0 0x11203e00 0 0x0100>; -+ reg-names = "mac", "ippc"; -+ interrupts = ; -+ clocks = <&infracfg CLK_INFRA_IUSB_SYS_CK>, -+ <&infracfg CLK_INFRA_IUSB_CK>, -+ <&infracfg CLK_INFRA_IUSB_133_CK>, -+ <&infracfg CLK_INFRA_IUSB_66M_CK>, -+ <&topckgen CLK_TOP_U2U3_XHCI_SEL>; -+ clock-names = "sys_ck", -+ "ref_ck", -+ "mcu_ck", -+ "dma_ck", -+ "xhci_ck"; -+ phys = <&u2port0 PHY_TYPE_USB2>, -+ <&u3port0 PHY_TYPE_USB3>, -+ <&u2port1 PHY_TYPE_USB2>; -+ status = "disabled"; -+ }; -+ -+ usb_phy: t-phy@11e10000 { -+ compatible = "mediatek,mt7986-tphy", -+ "mediatek,generic-tphy-v2"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0 0 0x11e10000 0x1700>; -+ status = "disabled"; -+ -+ u2port0: usb-phy@0 { -+ reg = <0x0 0x700>; -+ clocks = <&topckgen CLK_TOP_DA_U2_REFSEL>, -+ <&topckgen CLK_TOP_DA_U2_CK_1P_SEL>; -+ clock-names = "ref", "da_ref"; -+ #phy-cells = <1>; -+ }; -+ -+ u3port0: usb-phy@700 { -+ reg = <0x700 0x900>; -+ clocks = <&topckgen CLK_TOP_USB3_PHY_SEL>; -+ clock-names = "ref"; -+ #phy-cells = <1>; -+ }; -+ -+ u2port1: usb-phy@1000 { -+ reg = <0x1000 0x700>; -+ clocks = <&topckgen CLK_TOP_DA_U2_REFSEL>, -+ <&topckgen CLK_TOP_DA_U2_CK_1P_SEL>; -+ clock-names = "ref", "da_ref"; -+ #phy-cells = <1>; -+ }; -+ }; -+ - ethsys: syscon@15000000 { - #address-cells = <1>; - #size-cells = <1>; ---- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts -@@ -167,10 +167,18 @@ - status = "okay"; - }; - -+&ssusb { -+ status = "okay"; -+}; -+ - &uart0 { - status = "okay"; - }; - -+&usb_phy { -+ status = "okay"; -+}; -+ - &wifi { - status = "okay"; - pinctrl-names = "default", "dbdc"; diff --git a/target/linux/mediatek/patches-6.1/008-v6.3-arm64-dts-mt7986-add-mmc-related-device-nodes.patch b/target/linux/mediatek/patches-6.1/008-v6.3-arm64-dts-mt7986-add-mmc-related-device-nodes.patch deleted file mode 100644 index 40e71cd429b..00000000000 --- a/target/linux/mediatek/patches-6.1/008-v6.3-arm64-dts-mt7986-add-mmc-related-device-nodes.patch +++ /dev/null @@ -1,160 +0,0 @@ -From c1744e9e75a6a8abc7c893f349bcbf725b9c0d74 Mon Sep 17 00:00:00 2001 -From: Sam Shih -Date: Fri, 6 Jan 2023 16:28:43 +0100 -Subject: [PATCH 08/19] arm64: dts: mt7986: add mmc related device nodes - -This patch adds mmc support for MT7986. - -Signed-off-by: Sam Shih -Signed-off-by: Frank Wunderlich -Link: https://lore.kernel.org/r/20230106152845.88717-4-linux@fw-web.de -Signed-off-by: Matthias Brugger ---- - arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 96 ++++++++++++++++++++ - arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 15 +++ - 2 files changed, 111 insertions(+) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts -@@ -5,6 +5,8 @@ - */ - - /dts-v1/; -+#include -+ - #include "mt7986a.dtsi" - - / { -@@ -23,6 +25,24 @@ - device_type = "memory"; - reg = <0 0x40000000 0 0x40000000>; - }; -+ -+ reg_1p8v: regulator-1p8v { -+ compatible = "regulator-fixed"; -+ regulator-name = "fixed-1.8V"; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ regulator-boot-on; -+ regulator-always-on; -+ }; -+ -+ reg_3p3v: regulator-3p3v { -+ compatible = "regulator-fixed"; -+ regulator-name = "fixed-3.3V"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-boot-on; -+ regulator-always-on; -+ }; - }; - - &crypto { -@@ -58,7 +78,83 @@ - }; - }; - -+&mmc0 { -+ pinctrl-names = "default", "state_uhs"; -+ pinctrl-0 = <&mmc0_pins_default>; -+ pinctrl-1 = <&mmc0_pins_uhs>; -+ bus-width = <8>; -+ max-frequency = <200000000>; -+ cap-mmc-highspeed; -+ mmc-hs200-1_8v; -+ mmc-hs400-1_8v; -+ hs400-ds-delay = <0x14014>; -+ vmmc-supply = <®_3p3v>; -+ vqmmc-supply = <®_1p8v>; -+ non-removable; -+ no-sd; -+ no-sdio; -+ status = "okay"; -+}; -+ - &pio { -+ mmc0_pins_default: mmc0-pins { -+ mux { -+ function = "emmc"; -+ groups = "emmc_51"; -+ }; -+ conf-cmd-dat { -+ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", -+ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", -+ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; -+ input-enable; -+ drive-strength = <4>; -+ bias-pull-up = ; /* pull-up 10K */ -+ }; -+ conf-clk { -+ pins = "EMMC_CK"; -+ drive-strength = <6>; -+ bias-pull-down = ; /* pull-down 50K */ -+ }; -+ conf-ds { -+ pins = "EMMC_DSL"; -+ bias-pull-down = ; /* pull-down 50K */ -+ }; -+ conf-rst { -+ pins = "EMMC_RSTB"; -+ drive-strength = <4>; -+ bias-pull-up = ; /* pull-up 10K */ -+ }; -+ }; -+ -+ mmc0_pins_uhs: mmc0-uhs-pins { -+ mux { -+ function = "emmc"; -+ groups = "emmc_51"; -+ }; -+ conf-cmd-dat { -+ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", -+ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", -+ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; -+ input-enable; -+ drive-strength = <4>; -+ bias-pull-up = ; /* pull-up 10K */ -+ }; -+ conf-clk { -+ pins = "EMMC_CK"; -+ drive-strength = <6>; -+ bias-pull-down = ; /* pull-down 50K */ -+ }; -+ conf-ds { -+ pins = "EMMC_DSL"; -+ bias-pull-down = ; /* pull-down 50K */ -+ }; -+ conf-rst { -+ pins = "EMMC_RSTB"; -+ drive-strength = <4>; -+ bias-pull-up = ; /* pull-up 10K */ -+ }; -+ }; -+ - spi_flash_pins: spi-flash-pins { - mux { - function = "spi"; ---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -@@ -346,6 +346,21 @@ - status = "disabled"; - }; - -+ mmc0: mmc@11230000 { -+ compatible = "mediatek,mt7986-mmc"; -+ reg = <0 0x11230000 0 0x1000>, -+ <0 0x11c20000 0 0x1000>; -+ interrupts = ; -+ clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>, -+ <&infracfg CLK_INFRA_MSDC_HCK_CK>, -+ <&infracfg CLK_INFRA_MSDC_CK>, -+ <&infracfg CLK_INFRA_MSDC_133M_CK>, -+ <&infracfg CLK_INFRA_MSDC_66M_CK>; -+ clock-names = "source", "hclk", "source_cg", "bus_clk", -+ "sys_cg"; -+ status = "disabled"; -+ }; -+ - usb_phy: t-phy@11e10000 { - compatible = "mediatek,mt7986-tphy", - "mediatek,generic-tphy-v2"; diff --git a/target/linux/mediatek/patches-6.1/009-v6.3-arm64-dts-mt7986-add-pcie-related-device-nodes.patch b/target/linux/mediatek/patches-6.1/009-v6.3-arm64-dts-mt7986-add-pcie-related-device-nodes.patch deleted file mode 100644 index ab039c335a1..00000000000 --- a/target/linux/mediatek/patches-6.1/009-v6.3-arm64-dts-mt7986-add-pcie-related-device-nodes.patch +++ /dev/null @@ -1,118 +0,0 @@ -From 87a42ef1d6cf602e4aa40555b4404cad6149a90f Mon Sep 17 00:00:00 2001 -From: Sam Shih -Date: Fri, 6 Jan 2023 16:28:44 +0100 -Subject: [PATCH 09/19] arm64: dts: mt7986: add pcie related device nodes - -This patch adds PCIe support for MT7986. - -Signed-off-by: Jieyy Yang -Signed-off-by: Sam Shih -Signed-off-by: Frank Wunderlich -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20230106152845.88717-5-linux@fw-web.de -Signed-off-by: Matthias Brugger ---- - arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 16 ++++++ - arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 52 ++++++++++++++++++++ - 2 files changed, 68 insertions(+) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts -@@ -93,6 +93,15 @@ - non-removable; - no-sd; - no-sdio; -+}; -+ -+&pcie { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pcie_pins>; -+ status = "okay"; -+}; -+ -+&pcie_phy { - status = "okay"; - }; - -@@ -155,6 +164,13 @@ - }; - }; - -+ pcie_pins: pcie-pins { -+ mux { -+ function = "pcie"; -+ groups = "pcie_clk", "pcie_wake", "pcie_pereset"; -+ }; -+ }; -+ - spi_flash_pins: spi-flash-pins { - mux { - function = "spi"; ---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -@@ -8,6 +8,7 @@ - #include - #include - #include -+#include - - / { - compatible = "mediatek,mt7986a"; -@@ -361,6 +362,57 @@ - status = "disabled"; - }; - -+ pcie: pcie@11280000 { -+ compatible = "mediatek,mt7986-pcie", -+ "mediatek,mt8192-pcie"; -+ device_type = "pci"; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ reg = <0x00 0x11280000 0x00 0x4000>; -+ reg-names = "pcie-mac"; -+ interrupts = ; -+ bus-range = <0x00 0xff>; -+ ranges = <0x82000000 0x00 0x20000000 0x00 -+ 0x20000000 0x00 0x10000000>; -+ clocks = <&infracfg CLK_INFRA_IPCIE_PIPE_CK>, -+ <&infracfg CLK_INFRA_IPCIE_CK>, -+ <&infracfg CLK_INFRA_IPCIER_CK>, -+ <&infracfg CLK_INFRA_IPCIEB_CK>; -+ clock-names = "pl_250m", "tl_26m", "peri_26m", "top_133m"; -+ status = "disabled"; -+ -+ phys = <&pcie_port PHY_TYPE_PCIE>; -+ phy-names = "pcie-phy"; -+ -+ #interrupt-cells = <1>; -+ interrupt-map-mask = <0 0 0 0x7>; -+ interrupt-map = <0 0 0 1 &pcie_intc 0>, -+ <0 0 0 2 &pcie_intc 1>, -+ <0 0 0 3 &pcie_intc 2>, -+ <0 0 0 4 &pcie_intc 3>; -+ pcie_intc: interrupt-controller { -+ #address-cells = <0>; -+ #interrupt-cells = <1>; -+ interrupt-controller; -+ }; -+ }; -+ -+ pcie_phy: t-phy@11c00000 { -+ compatible = "mediatek,mt7986-tphy", -+ "mediatek,generic-tphy-v2"; -+ #address-cells = <2>; -+ #size-cells = <2>; -+ ranges; -+ status = "disabled"; -+ -+ pcie_port: pcie-phy@11c00000 { -+ reg = <0 0x11c00000 0 0x20000>; -+ clocks = <&clk40m>; -+ clock-names = "ref"; -+ #phy-cells = <1>; -+ }; -+ }; -+ - usb_phy: t-phy@11e10000 { - compatible = "mediatek,mt7986-tphy", - "mediatek,generic-tphy-v2"; diff --git a/target/linux/mediatek/patches-6.1/010-v6.3-arm64-dts-mt7986-add-Bananapi-R3.patch b/target/linux/mediatek/patches-6.1/010-v6.3-arm64-dts-mt7986-add-Bananapi-R3.patch deleted file mode 100644 index 38f159c74ee..00000000000 --- a/target/linux/mediatek/patches-6.1/010-v6.3-arm64-dts-mt7986-add-Bananapi-R3.patch +++ /dev/null @@ -1,689 +0,0 @@ -From a751f7412e0098801673b80bc7a4738ae7d710ce Mon Sep 17 00:00:00 2001 -From: Frank Wunderlich -Date: Fri, 6 Jan 2023 16:28:45 +0100 -Subject: [PATCH 10/19] arm64: dts: mt7986: add Bananapi R3 - -Add support for Bananapi R3 SBC. - -- SD/eMMC support (switching first 4 bits of data-bus with sw6/D) -- SPI-NAND/NOR support (switched CS by sw5/C) -- all rj45 ports and both SFP working (eth1/lan4) -- all USB-Ports + SIM-Slot tested -- i2c and all uarts tested -- wifi tested (with eeprom calibration data) - -The device can boot from all 4 storage options. Both, SPI and MMC, can -be switched using hardware switches on the board, see -https://wiki.banana-pi.org/Banana_Pi_BPI-R3#Jumper_setting - -Signed-off-by: Frank Wunderlich -Link: https://lore.kernel.org/r/20230106152845.88717-6-linux@fw-web.de -Signed-off-by: Matthias Brugger ---- - arch/arm64/boot/dts/mediatek/Makefile | 5 + - .../mt7986a-bananapi-bpi-r3-emmc.dtso | 29 ++ - .../mt7986a-bananapi-bpi-r3-nand.dtso | 55 +++ - .../mediatek/mt7986a-bananapi-bpi-r3-nor.dtso | 68 +++ - .../mediatek/mt7986a-bananapi-bpi-r3-sd.dtso | 23 + - .../dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 450 ++++++++++++++++++ - 6 files changed, 630 insertions(+) - create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso - create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso - create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso - create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso - create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts - ---- a/arch/arm64/boot/dts/mediatek/Makefile -+++ b/arch/arm64/boot/dts/mediatek/Makefile -@@ -7,6 +7,11 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-ev - dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb - dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb - dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb -+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3.dtb -+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo -+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo -+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo -+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo - dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb - dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb - dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb ---- /dev/null -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso -@@ -0,0 +1,29 @@ -+// SPDX-License-Identifier: (GPL-2.0 OR MIT) -+/* -+ * Copyright (C) 2021 MediaTek Inc. -+ * Author: Sam.Shih -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "bananapi,bpi-r3", "mediatek,mt7986a"; -+ -+ fragment@0 { -+ target-path = "/soc/mmc@11230000"; -+ __overlay__ { -+ bus-width = <8>; -+ max-frequency = <200000000>; -+ cap-mmc-highspeed; -+ mmc-hs200-1_8v; -+ mmc-hs400-1_8v; -+ hs400-ds-delay = <0x14014>; -+ non-removable; -+ no-sd; -+ no-sdio; -+ status = "okay"; -+ }; -+ }; -+}; -+ ---- /dev/null -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso -@@ -0,0 +1,55 @@ -+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */ -+/* -+ * Authors: Daniel Golle -+ * Frank Wunderlich -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "bananapi,bpi-r3", "mediatek,mt7986a"; -+ -+ fragment@0 { -+ target-path = "/soc/spi@1100a000"; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ spi_nand: spi_nand@0 { -+ compatible = "spi-nand"; -+ reg = <0>; -+ spi-max-frequency = <10000000>; -+ spi-tx-bus-width = <4>; -+ spi-rx-bus-width = <4>; -+ -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "bl2"; -+ reg = <0x0 0x80000>; -+ read-only; -+ }; -+ -+ partition@80000 { -+ label = "reserved"; -+ reg = <0x80000 0x300000>; -+ }; -+ -+ partition@380000 { -+ label = "fip"; -+ reg = <0x380000 0x200000>; -+ read-only; -+ }; -+ -+ partition@580000 { -+ label = "ubi"; -+ reg = <0x580000 0x7a80000>; -+ }; -+ }; -+ }; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso -@@ -0,0 +1,68 @@ -+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */ -+/* -+ * Authors: Daniel Golle -+ * Frank Wunderlich -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "bananapi,bpi-r3", "mediatek,mt7986a"; -+ -+ fragment@0 { -+ target-path = "/soc/spi@1100a000"; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ flash@0 { -+ compatible = "jedec,spi-nor"; -+ reg = <0>; -+ spi-max-frequency = <10000000>; -+ -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "bl2"; -+ reg = <0x0 0x20000>; -+ read-only; -+ }; -+ -+ partition@20000 { -+ label = "reserved"; -+ reg = <0x20000 0x20000>; -+ }; -+ -+ partition@40000 { -+ label = "u-boot-env"; -+ reg = <0x40000 0x40000>; -+ }; -+ -+ partition@80000 { -+ label = "reserved2"; -+ reg = <0x80000 0x80000>; -+ }; -+ -+ partition@100000 { -+ label = "fip"; -+ reg = <0x100000 0x80000>; -+ read-only; -+ }; -+ -+ partition@180000 { -+ label = "recovery"; -+ reg = <0x180000 0xa80000>; -+ }; -+ -+ partition@c00000 { -+ label = "fit"; -+ reg = <0xc00000 0x1400000>; -+ }; -+ }; -+ }; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso -@@ -0,0 +1,23 @@ -+// SPDX-License-Identifier: (GPL-2.0 OR MIT) -+/* -+ * Copyright (C) 2021 MediaTek Inc. -+ * Author: Sam.Shih -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "bananapi,bpi-r3", "mediatek,mt7986a"; -+ -+ fragment@0 { -+ target-path = "/soc/mmc@11230000"; -+ __overlay__ { -+ bus-width = <4>; -+ max-frequency = <52000000>; -+ cap-sd-highspeed; -+ status = "okay"; -+ }; -+ }; -+}; -+ ---- /dev/null -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts -@@ -0,0 +1,450 @@ -+// SPDX-License-Identifier: (GPL-2.0 OR MIT) -+/* -+ * Copyright (C) 2021 MediaTek Inc. -+ * Authors: Sam.Shih -+ * Frank Wunderlich -+ * Daniel Golle -+ */ -+ -+/dts-v1/; -+#include -+#include -+#include -+#include -+ -+#include "mt7986a.dtsi" -+ -+/ { -+ model = "Bananapi BPI-R3"; -+ compatible = "bananapi,bpi-r3", "mediatek,mt7986a"; -+ -+ aliases { -+ serial0 = &uart0; -+ ethernet0 = &gmac0; -+ ethernet1 = &gmac1; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ dcin: regulator-12vd { -+ compatible = "regulator-fixed"; -+ regulator-name = "12vd"; -+ regulator-min-microvolt = <12000000>; -+ regulator-max-microvolt = <12000000>; -+ regulator-boot-on; -+ regulator-always-on; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ -+ reset-key { -+ label = "reset"; -+ linux,code = ; -+ gpios = <&pio 9 GPIO_ACTIVE_LOW>; -+ }; -+ -+ wps-key { -+ label = "wps"; -+ linux,code = ; -+ gpios = <&pio 10 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ /* i2c of the left SFP cage (wan) */ -+ i2c_sfp1: i2c-gpio-0 { -+ compatible = "i2c-gpio"; -+ sda-gpios = <&pio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; -+ scl-gpios = <&pio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; -+ i2c-gpio,delay-us = <2>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ -+ /* i2c of the right SFP cage (lan) */ -+ i2c_sfp2: i2c-gpio-1 { -+ compatible = "i2c-gpio"; -+ sda-gpios = <&pio 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; -+ scl-gpios = <&pio 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; -+ i2c-gpio,delay-us = <2>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ green_led: led-0 { -+ color = ; -+ function = LED_FUNCTION_POWER; -+ gpios = <&pio 69 GPIO_ACTIVE_HIGH>; -+ default-state = "on"; -+ }; -+ -+ blue_led: led-1 { -+ color = ; -+ function = LED_FUNCTION_STATUS; -+ gpios = <&pio 86 GPIO_ACTIVE_HIGH>; -+ default-state = "off"; -+ }; -+ }; -+ -+ reg_1p8v: regulator-1p8v { -+ compatible = "regulator-fixed"; -+ regulator-name = "1.8vd"; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ regulator-boot-on; -+ regulator-always-on; -+ vin-supply = <&dcin>; -+ }; -+ -+ reg_3p3v: regulator-3p3v { -+ compatible = "regulator-fixed"; -+ regulator-name = "3.3vd"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-boot-on; -+ regulator-always-on; -+ vin-supply = <&dcin>; -+ }; -+ -+ /* left SFP cage (wan) */ -+ sfp1: sfp-1 { -+ compatible = "sff,sfp"; -+ i2c-bus = <&i2c_sfp1>; -+ los-gpios = <&pio 46 GPIO_ACTIVE_HIGH>; -+ mod-def0-gpios = <&pio 49 GPIO_ACTIVE_LOW>; -+ tx-disable-gpios = <&pio 20 GPIO_ACTIVE_HIGH>; -+ tx-fault-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ /* right SFP cage (lan) */ -+ sfp2: sfp-2 { -+ compatible = "sff,sfp"; -+ i2c-bus = <&i2c_sfp2>; -+ los-gpios = <&pio 31 GPIO_ACTIVE_HIGH>; -+ mod-def0-gpios = <&pio 47 GPIO_ACTIVE_LOW>; -+ tx-disable-gpios = <&pio 15 GPIO_ACTIVE_HIGH>; -+ tx-fault-gpios = <&pio 48 GPIO_ACTIVE_HIGH>; -+ }; -+}; -+ -+&crypto { -+ status = "okay"; -+}; -+ -+ð { -+ status = "okay"; -+ -+ gmac0: mac@0 { -+ compatible = "mediatek,eth-mac"; -+ reg = <0>; -+ phy-mode = "2500base-x"; -+ -+ fixed-link { -+ speed = <2500>; -+ full-duplex; -+ pause; -+ }; -+ }; -+ -+ gmac1: mac@1 { -+ compatible = "mediatek,eth-mac"; -+ reg = <1>; -+ phy-mode = "2500base-x"; -+ sfp = <&sfp1>; -+ managed = "in-band-status"; -+ }; -+ -+ mdio: mdio-bus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+}; -+ -+&mdio { -+ switch: switch@1f { -+ compatible = "mediatek,mt7531"; -+ reg = <31>; -+ interrupt-controller; -+ #interrupt-cells = <1>; -+ interrupt-parent = <&pio>; -+ interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; -+ reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>; -+ }; -+}; -+ -+&mmc0 { -+ pinctrl-names = "default", "state_uhs"; -+ pinctrl-0 = <&mmc0_pins_default>; -+ pinctrl-1 = <&mmc0_pins_uhs>; -+ vmmc-supply = <®_3p3v>; -+ vqmmc-supply = <®_1p8v>; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c_pins>; -+ status = "okay"; -+}; -+ -+&pcie { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pcie_pins>; -+ status = "okay"; -+}; -+ -+&pcie_phy { -+ status = "okay"; -+}; -+ -+&pio { -+ i2c_pins: i2c-pins { -+ mux { -+ function = "i2c"; -+ groups = "i2c"; -+ }; -+ }; -+ -+ mmc0_pins_default: mmc0-pins { -+ mux { -+ function = "emmc"; -+ groups = "emmc_51"; -+ }; -+ conf-cmd-dat { -+ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", -+ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", -+ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; -+ input-enable; -+ drive-strength = <4>; -+ bias-pull-up = ; /* pull-up 10K */ -+ }; -+ conf-clk { -+ pins = "EMMC_CK"; -+ drive-strength = <6>; -+ bias-pull-down = ; /* pull-down 50K */ -+ }; -+ conf-ds { -+ pins = "EMMC_DSL"; -+ bias-pull-down = ; /* pull-down 50K */ -+ }; -+ conf-rst { -+ pins = "EMMC_RSTB"; -+ drive-strength = <4>; -+ bias-pull-up = ; /* pull-up 10K */ -+ }; -+ }; -+ -+ mmc0_pins_uhs: mmc0-uhs-pins { -+ mux { -+ function = "emmc"; -+ groups = "emmc_51"; -+ }; -+ conf-cmd-dat { -+ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", -+ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", -+ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; -+ input-enable; -+ drive-strength = <4>; -+ bias-pull-up = ; /* pull-up 10K */ -+ }; -+ conf-clk { -+ pins = "EMMC_CK"; -+ drive-strength = <6>; -+ bias-pull-down = ; /* pull-down 50K */ -+ }; -+ conf-ds { -+ pins = "EMMC_DSL"; -+ bias-pull-down = ; /* pull-down 50K */ -+ }; -+ conf-rst { -+ pins = "EMMC_RSTB"; -+ drive-strength = <4>; -+ bias-pull-up = ; /* pull-up 10K */ -+ }; -+ }; -+ -+ pcie_pins: pcie-pins { -+ mux { -+ function = "pcie"; -+ groups = "pcie_clk", "pcie_pereset"; -+ }; -+ }; -+ -+ spi_flash_pins: spi-flash-pins { -+ mux { -+ function = "spi"; -+ groups = "spi0", "spi0_wp_hold"; -+ }; -+ }; -+ -+ spic_pins: spic-pins { -+ mux { -+ function = "spi"; -+ groups = "spi1_0"; -+ }; -+ }; -+ -+ uart1_pins: uart1-pins { -+ mux { -+ function = "uart"; -+ groups = "uart1_rx_tx"; -+ }; -+ }; -+ -+ uart2_pins: uart2-pins { -+ mux { -+ function = "uart"; -+ groups = "uart2_0_rx_tx"; -+ }; -+ }; -+ -+ wf_2g_5g_pins: wf-2g-5g-pins { -+ mux { -+ function = "wifi"; -+ groups = "wf_2g", "wf_5g"; -+ }; -+ conf { -+ pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", -+ "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", -+ "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", -+ "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", -+ "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", -+ "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", -+ "WF1_TOP_CLK", "WF1_TOP_DATA"; -+ drive-strength = <4>; -+ }; -+ }; -+ -+ wf_dbdc_pins: wf-dbdc-pins { -+ mux { -+ function = "wifi"; -+ groups = "wf_dbdc"; -+ }; -+ conf { -+ pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", -+ "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", -+ "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", -+ "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", -+ "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", -+ "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", -+ "WF1_TOP_CLK", "WF1_TOP_DATA"; -+ drive-strength = <4>; -+ }; -+ }; -+ -+ wf_led_pins: wf-led-pins { -+ mux { -+ function = "led"; -+ groups = "wifi_led"; -+ }; -+ }; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi_flash_pins>; -+ status = "okay"; -+}; -+ -+&spi1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spic_pins>; -+ status = "okay"; -+}; -+ -+&ssusb { -+ status = "okay"; -+}; -+ -+&switch { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ label = "wan"; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ label = "lan0"; -+ }; -+ -+ port@2 { -+ reg = <2>; -+ label = "lan1"; -+ }; -+ -+ port@3 { -+ reg = <3>; -+ label = "lan2"; -+ }; -+ -+ port@4 { -+ reg = <4>; -+ label = "lan3"; -+ }; -+ -+ port5: port@5 { -+ reg = <5>; -+ label = "lan4"; -+ phy-mode = "2500base-x"; -+ sfp = <&sfp2>; -+ managed = "in-band-status"; -+ }; -+ -+ port@6 { -+ reg = <6>; -+ label = "cpu"; -+ ethernet = <&gmac0>; -+ phy-mode = "2500base-x"; -+ -+ fixed-link { -+ speed = <2500>; -+ full-duplex; -+ pause; -+ }; -+ }; -+ }; -+}; -+ -+&trng { -+ status = "okay"; -+}; -+ -+&uart0 { -+ status = "okay"; -+}; -+ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins>; -+ status = "okay"; -+}; -+ -+&uart2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart2_pins>; -+ status = "okay"; -+}; -+ -+&usb_phy { -+ status = "okay"; -+}; -+ -+&watchdog { -+ status = "okay"; -+}; -+ -+&wifi { -+ status = "okay"; -+ pinctrl-names = "default", "dbdc"; -+ pinctrl-0 = <&wf_2g_5g_pins>, <&wf_led_pins>; -+ pinctrl-1 = <&wf_dbdc_pins>, <&wf_led_pins>; -+}; -+ diff --git a/target/linux/mediatek/patches-6.1/011-v6.5-arm64-mediatek-Propagate-chassis-type-where-possible.patch b/target/linux/mediatek/patches-6.1/011-v6.5-arm64-mediatek-Propagate-chassis-type-where-possible.patch deleted file mode 100644 index 79038334c4e..00000000000 --- a/target/linux/mediatek/patches-6.1/011-v6.5-arm64-mediatek-Propagate-chassis-type-where-possible.patch +++ /dev/null @@ -1,323 +0,0 @@ -From 4c2d5411f4b101f7aa0fd74f80109e3afd6dc967 Mon Sep 17 00:00:00 2001 -From: AngeloGioacchino Del Regno -Date: Wed, 17 May 2023 12:11:08 +0200 -Subject: [PATCH 11/19] arm64: mediatek: Propagate chassis-type where possible - -The chassis-type string identifies the form-factor of the system: -add this property to all device trees of devices for which the form -factor is known. - -Signed-off-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20230517101108.205654-1-angelogioacchino.delregno@collabora.com -Signed-off-by: Matthias Brugger ---- - arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 1 + - arch/arm64/boot/dts/mediatek/mt6755-evb.dts | 1 + - arch/arm64/boot/dts/mediatek/mt6779-evb.dts | 1 + - arch/arm64/boot/dts/mediatek/mt6795-evb.dts | 1 + - arch/arm64/boot/dts/mediatek/mt6797-evb.dts | 1 + - arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts | 1 + - arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 1 + - arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 1 + - arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 1 + - arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 1 + - arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 1 + - arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts | 1 + - arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts | 1 + - arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts | 1 + - arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 1 + - arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 1 + - arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 1 + - arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts | 1 + - arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts | 1 + - .../boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts | 1 + - arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts | 1 + - arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts | 1 + - arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts | 1 + - arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts | 1 + - arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts | 1 + - arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts | 1 + - arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts | 1 + - arch/arm64/boot/dts/mediatek/mt8186-evb.dts | 1 + - 28 files changed, 28 insertions(+) - ---- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts -+++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts -@@ -11,6 +11,7 @@ - - / { - model = "MediaTek MT2712 evaluation board"; -+ chassis-type = "embedded"; - compatible = "mediatek,mt2712-evb", "mediatek,mt2712"; - - aliases { ---- a/arch/arm64/boot/dts/mediatek/mt6755-evb.dts -+++ b/arch/arm64/boot/dts/mediatek/mt6755-evb.dts -@@ -9,6 +9,7 @@ - - / { - model = "MediaTek MT6755 EVB"; -+ chassis-type = "embedded"; - compatible = "mediatek,mt6755-evb", "mediatek,mt6755"; - - aliases { ---- a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts -+++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts -@@ -10,6 +10,7 @@ - - / { - model = "MediaTek MT6779 EVB"; -+ chassis-type = "embedded"; - compatible = "mediatek,mt6779-evb", "mediatek,mt6779"; - - aliases { ---- a/arch/arm64/boot/dts/mediatek/mt6795-evb.dts -+++ b/arch/arm64/boot/dts/mediatek/mt6795-evb.dts -@@ -9,6 +9,7 @@ - - / { - model = "MediaTek MT6795 Evaluation Board"; -+ chassis-type = "embedded"; - compatible = "mediatek,mt6795-evb", "mediatek,mt6795"; - - aliases { ---- a/arch/arm64/boot/dts/mediatek/mt6797-evb.dts -+++ b/arch/arm64/boot/dts/mediatek/mt6797-evb.dts -@@ -9,6 +9,7 @@ - - / { - model = "MediaTek MT6797 Evaluation Board"; -+ chassis-type = "embedded"; - compatible = "mediatek,mt6797-evb", "mediatek,mt6797"; - - aliases { ---- a/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts -+++ b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts -@@ -12,6 +12,7 @@ - - / { - model = "Mediatek X20 Development Board"; -+ chassis-type = "embedded"; - compatible = "archermind,mt6797-x20-dev", "mediatek,mt6797"; - - aliases { ---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -@@ -15,6 +15,7 @@ - - / { - model = "Bananapi BPI-R64"; -+ chassis-type = "embedded"; - compatible = "bananapi,bpi-r64", "mediatek,mt7622"; - - aliases { ---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts -@@ -15,6 +15,7 @@ - - / { - model = "MediaTek MT7622 RFB1 board"; -+ chassis-type = "embedded"; - compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622"; - - aliases { ---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts -@@ -16,6 +16,7 @@ - - / { - model = "Bananapi BPI-R3"; -+ chassis-type = "embedded"; - compatible = "bananapi,bpi-r3", "mediatek,mt7986a"; - - aliases { ---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts -@@ -11,6 +11,7 @@ - - / { - model = "MediaTek MT7986a RFB"; -+ chassis-type = "embedded"; - compatible = "mediatek,mt7986a-rfb", "mediatek,mt7986a"; - - aliases { ---- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts -@@ -9,6 +9,7 @@ - - / { - model = "MediaTek MT7986b RFB"; -+ chassis-type = "embedded"; - compatible = "mediatek,mt7986b-rfb", "mediatek,mt7986b"; - - aliases { ---- a/arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts -+++ b/arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts -@@ -11,6 +11,7 @@ - - / { - model = "Pumpkin MT8167"; -+ chassis-type = "embedded"; - compatible = "mediatek,mt8167-pumpkin", "mediatek,mt8167"; - - memory@40000000 { ---- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts -+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts -@@ -8,6 +8,7 @@ - - / { - model = "Google Hanawl"; -+ chassis-type = "laptop"; - compatible = "google,hana-rev7", "mediatek,mt8173"; - }; - ---- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts -+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts -@@ -8,6 +8,7 @@ - - / { - model = "Google Hana"; -+ chassis-type = "laptop"; - compatible = "google,hana-rev6", "google,hana-rev5", - "google,hana-rev4", "google,hana-rev3", - "google,hana", "mediatek,mt8173"; ---- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts -+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts -@@ -8,6 +8,7 @@ - - / { - model = "Google Elm"; -+ chassis-type = "laptop"; - compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6", - "google,elm-rev5", "google,elm-rev4", "google,elm-rev3", - "google,elm", "mediatek,mt8173"; ---- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts -+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts -@@ -10,6 +10,7 @@ - - / { - model = "MediaTek MT8173 evaluation board"; -+ chassis-type = "embedded"; - compatible = "mediatek,mt8173-evb", "mediatek,mt8173"; - - aliases { ---- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts -+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts -@@ -11,6 +11,7 @@ - - / { - model = "MediaTek MT8183 evaluation board"; -+ chassis-type = "embedded"; - compatible = "mediatek,mt8183-evb", "mediatek,mt8183"; - - aliases { ---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts -+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts -@@ -9,6 +9,7 @@ - - / { - model = "Google burnet board"; -+ chassis-type = "convertible"; - compatible = "google,burnet", "mediatek,mt8183"; - }; - ---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts -+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts -@@ -9,6 +9,7 @@ - - / { - model = "Google damu board"; -+ chassis-type = "convertible"; - compatible = "google,damu", "mediatek,mt8183"; - }; - ---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts -+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts -@@ -9,6 +9,7 @@ - - / { - model = "Google juniper sku16 board"; -+ chassis-type = "convertible"; - compatible = "google,juniper-sku16", "google,juniper", "mediatek,mt8183"; - }; - ---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts -+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts -@@ -9,6 +9,7 @@ - - / { - model = "MediaTek kakadu board sku22"; -+ chassis-type = "tablet"; - compatible = "google,kakadu-rev3-sku22", "google,kakadu-rev2-sku22", - "google,kakadu", "mediatek,mt8183"; - }; ---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts -+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts -@@ -9,6 +9,7 @@ - - / { - model = "MediaTek kakadu board"; -+ chassis-type = "tablet"; - compatible = "google,kakadu-rev3", "google,kakadu-rev2", - "google,kakadu", "mediatek,mt8183"; - }; ---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts -+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts -@@ -12,6 +12,7 @@ - - / { - model = "MediaTek kodama sku16 board"; -+ chassis-type = "tablet"; - compatible = "google,kodama-sku16", "google,kodama", "mediatek,mt8183"; - }; - ---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts -+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts -@@ -12,6 +12,7 @@ - - / { - model = "MediaTek kodama sku272 board"; -+ chassis-type = "tablet"; - compatible = "google,kodama-sku272", "google,kodama", "mediatek,mt8183"; - }; - ---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts -+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts -@@ -12,6 +12,7 @@ - - / { - model = "MediaTek kodama sku288 board"; -+ chassis-type = "tablet"; - compatible = "google,kodama-sku288", "google,kodama", "mediatek,mt8183"; - }; - ---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts -+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts -@@ -14,6 +14,7 @@ - - / { - model = "MediaTek krane sku0 board"; -+ chassis-type = "tablet"; - compatible = "google,krane-sku0", "google,krane", "mediatek,mt8183"; - }; - ---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts -+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts -@@ -14,6 +14,7 @@ - - / { - model = "MediaTek krane sku176 board"; -+ chassis-type = "tablet"; - compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183"; - }; - ---- a/arch/arm64/boot/dts/mediatek/mt8186-evb.dts -+++ b/arch/arm64/boot/dts/mediatek/mt8186-evb.dts -@@ -7,6 +7,7 @@ - - / { - model = "MediaTek MT8186 evaluation board"; -+ chassis-type = "embedded"; - compatible = "mediatek,mt8186-evb", "mediatek,mt8186"; - - aliases { diff --git a/target/linux/mediatek/patches-6.1/012-v6.5-arm64-dts-mt7986-add-PWM.patch b/target/linux/mediatek/patches-6.1/012-v6.5-arm64-dts-mt7986-add-PWM.patch deleted file mode 100644 index 915da7984e6..00000000000 --- a/target/linux/mediatek/patches-6.1/012-v6.5-arm64-dts-mt7986-add-PWM.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 3b92c547e3d4a35c6214b3e7fa1103d0749d83b1 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Fri, 21 Apr 2023 15:20:44 +0200 -Subject: [PATCH 12/19] arm64: dts: mt7986: add PWM - -This adds pwm node to mt7986. - -Signed-off-by: Daniel Golle -Signed-off-by: Frank Wunderlich -Link: https://lore.kernel.org/r/20230421132047.42166-5-linux@fw-web.de -Signed-off-by: Matthias Brugger ---- - arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 14 ++++++++++++++ - 1 file changed, 14 insertions(+) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -@@ -241,6 +241,20 @@ - status = "disabled"; - }; - -+ pwm: pwm@10048000 { -+ compatible = "mediatek,mt7986-pwm"; -+ reg = <0 0x10048000 0 0x1000>; -+ #clock-cells = <1>; -+ #pwm-cells = <2>; -+ interrupts = ; -+ clocks = <&topckgen CLK_TOP_PWM_SEL>, -+ <&infracfg CLK_INFRA_PWM_STA>, -+ <&infracfg CLK_INFRA_PWM1_CK>, -+ <&infracfg CLK_INFRA_PWM2_CK>; -+ clock-names = "top", "main", "pwm1", "pwm2"; -+ status = "disabled"; -+ }; -+ - uart0: serial@11002000 { - compatible = "mediatek,mt7986-uart", - "mediatek,mt6577-uart"; diff --git a/target/linux/mediatek/patches-6.1/013-v6.5-arm64-dts-mt7986-add-PWM-to-BPI-R3.patch b/target/linux/mediatek/patches-6.1/013-v6.5-arm64-dts-mt7986-add-PWM-to-BPI-R3.patch deleted file mode 100644 index ce908e3d31f..00000000000 --- a/target/linux/mediatek/patches-6.1/013-v6.5-arm64-dts-mt7986-add-PWM-to-BPI-R3.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 35e482bb599df010b4869017ff576dbb7a4d4c2e Mon Sep 17 00:00:00 2001 -From: Frank Wunderlich -Date: Fri, 21 Apr 2023 15:20:45 +0200 -Subject: [PATCH 13/19] arm64: dts: mt7986: add PWM to BPI-R3 - -Add pwm node and pinctrl to BananaPi R3 devicetree. - -Signed-off-by: Frank Wunderlich -Link: https://lore.kernel.org/r/20230421132047.42166-6-linux@fw-web.de -Signed-off-by: Matthias Brugger ---- - .../boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts -@@ -275,6 +275,13 @@ - }; - }; - -+ pwm_pins: pwm-pins { -+ mux { -+ function = "pwm"; -+ groups = "pwm0", "pwm1_0"; -+ }; -+ }; -+ - spi_flash_pins: spi-flash-pins { - mux { - function = "spi"; -@@ -345,6 +352,12 @@ - }; - }; - -+&pwm { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pwm_pins>; -+ status = "okay"; -+}; -+ - &spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi_flash_pins>; diff --git a/target/linux/mediatek/patches-6.1/014-v6.5-arm64-dts-mt7986-set-Wifi-Leds-low-active-for-BPI-R3.patch b/target/linux/mediatek/patches-6.1/014-v6.5-arm64-dts-mt7986-set-Wifi-Leds-low-active-for-BPI-R3.patch deleted file mode 100644 index c7b38484f4f..00000000000 --- a/target/linux/mediatek/patches-6.1/014-v6.5-arm64-dts-mt7986-set-Wifi-Leds-low-active-for-BPI-R3.patch +++ /dev/null @@ -1,27 +0,0 @@ -From ccdda5714446db8690505371442f7807f5d7c6fc Mon Sep 17 00:00:00 2001 -From: Frank Wunderlich -Date: Sun, 5 Feb 2023 18:48:33 +0100 -Subject: [PATCH 14/19] arm64: dts: mt7986: set Wifi Leds low-active for BPI-R3 - -Leds for Wifi are low-active, so add property to devicetree. - -Signed-off-by: Frank Wunderlich -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20230205174833.107050-1-linux@fw-web.de -Signed-off-by: Matthias Brugger ---- - arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts -@@ -460,5 +460,9 @@ - pinctrl-names = "default", "dbdc"; - pinctrl-0 = <&wf_2g_5g_pins>, <&wf_led_pins>; - pinctrl-1 = <&wf_dbdc_pins>, <&wf_led_pins>; -+ -+ led { -+ led-active-low; -+ }; - }; - diff --git a/target/linux/mediatek/patches-6.1/015-v6.5-arm64-dts-mt7986-use-size-of-reserved-partition-for-.patch b/target/linux/mediatek/patches-6.1/015-v6.5-arm64-dts-mt7986-use-size-of-reserved-partition-for-.patch deleted file mode 100644 index 0b84f1463ac..00000000000 --- a/target/linux/mediatek/patches-6.1/015-v6.5-arm64-dts-mt7986-use-size-of-reserved-partition-for-.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 1423b4b780adcf3994e63a5988a62d5d1d509bb1 Mon Sep 17 00:00:00 2001 -From: Frank Wunderlich -Date: Sun, 28 May 2023 13:33:42 +0200 -Subject: [PATCH 15/19] arm64: dts: mt7986: use size of reserved partition for - bl2 - -To store uncompressed bl2 more space is required than partition is -actually defined. - -There is currently no known usage of this reserved partition. -Openwrt uses same partition layout. - -We added same change to u-boot with commit d7bb1099 [1]. - -[1] https://source.denx.de/u-boot/u-boot/-/commit/d7bb109900c1ca754a0198b9afb50e3161ffc21e - -Cc: stable@vger.kernel.org -Fixes: 8e01fb15b815 ("arm64: dts: mt7986: add Bananapi R3") -Signed-off-by: Frank Wunderlich -Reviewed-by: AngeloGioacchino Del Regno -Reviewed-by: Daniel Golle -Link: https://lore.kernel.org/r/20230528113343.7649-1-linux@fw-web.de -Signed-off-by: Matthias Brugger ---- - .../boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso | 7 +------ - 1 file changed, 1 insertion(+), 6 deletions(-) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso -@@ -27,15 +27,10 @@ - - partition@0 { - label = "bl2"; -- reg = <0x0 0x20000>; -+ reg = <0x0 0x40000>; - read-only; - }; - -- partition@20000 { -- label = "reserved"; -- reg = <0x20000 0x20000>; -- }; -- - partition@40000 { - label = "u-boot-env"; - reg = <0x40000 0x40000>; diff --git a/target/linux/mediatek/patches-6.1/016-v6.5-arm64-dts-mt7986-add-thermal-and-efuse.patch b/target/linux/mediatek/patches-6.1/016-v6.5-arm64-dts-mt7986-add-thermal-and-efuse.patch deleted file mode 100644 index f1cb0eaf024..00000000000 --- a/target/linux/mediatek/patches-6.1/016-v6.5-arm64-dts-mt7986-add-thermal-and-efuse.patch +++ /dev/null @@ -1,80 +0,0 @@ -From 40a5a767d698ef7a71f8be851ea18b0a7a8b47bd Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Tue, 30 May 2023 22:12:33 +0200 -Subject: [PATCH 16/19] arm64: dts: mt7986: add thermal and efuse - -Add thermal related nodes to mt7986 devicetree. - -Signed-off-by: Daniel Golle -Signed-off-by: Frank Wunderlich -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20230530201235.22330-3-linux@fw-web.de -Signed-off-by: Matthias Brugger ---- - arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 36 ++++++++++++++++++++++- - 1 file changed, 35 insertions(+), 1 deletion(-) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -@@ -338,6 +338,15 @@ - status = "disabled"; - }; - -+ auxadc: adc@1100d000 { -+ compatible = "mediatek,mt7986-auxadc"; -+ reg = <0 0x1100d000 0 0x1000>; -+ clocks = <&infracfg CLK_INFRA_ADC_26M_CK>; -+ clock-names = "main"; -+ #io-channel-cells = <1>; -+ status = "disabled"; -+ }; -+ - ssusb: usb@11200000 { - compatible = "mediatek,mt7986-xhci", - "mediatek,mtk-xhci"; -@@ -376,6 +385,21 @@ - status = "disabled"; - }; - -+ thermal: thermal@1100c800 { -+ #thermal-sensor-cells = <1>; -+ compatible = "mediatek,mt7986-thermal"; -+ reg = <0 0x1100c800 0 0x800>; -+ interrupts = ; -+ clocks = <&infracfg CLK_INFRA_THERM_CK>, -+ <&infracfg CLK_INFRA_ADC_26M_CK>, -+ <&infracfg CLK_INFRA_ADC_FRC_CK>; -+ clock-names = "therm", "auxadc", "adc_32k"; -+ mediatek,auxadc = <&auxadc>; -+ mediatek,apmixedsys = <&apmixedsys>; -+ nvmem-cells = <&thermal_calibration>; -+ nvmem-cell-names = "calibration-data"; -+ }; -+ - pcie: pcie@11280000 { - compatible = "mediatek,mt7986-pcie", - "mediatek,mt8192-pcie"; -@@ -427,6 +451,17 @@ - }; - }; - -+ efuse: efuse@11d00000 { -+ compatible = "mediatek,mt7986-efuse", "mediatek,efuse"; -+ reg = <0 0x11d00000 0 0x1000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ thermal_calibration: calib@274 { -+ reg = <0x274 0xc>; -+ }; -+ }; -+ - usb_phy: t-phy@11e10000 { - compatible = "mediatek,mt7986-tphy", - "mediatek,generic-tphy-v2"; -@@ -568,5 +603,4 @@ - memory-region = <&wmcpu_emi>; - }; - }; -- - }; diff --git a/target/linux/mediatek/patches-6.1/017-v6.5-arm64-dts-mt7986-add-thermal-zones.patch b/target/linux/mediatek/patches-6.1/017-v6.5-arm64-dts-mt7986-add-thermal-zones.patch deleted file mode 100644 index ad21fb8c3cc..00000000000 --- a/target/linux/mediatek/patches-6.1/017-v6.5-arm64-dts-mt7986-add-thermal-zones.patch +++ /dev/null @@ -1,51 +0,0 @@ -From bb78d0cf5117517f1ed296ae71048945d9107675 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Tue, 30 May 2023 22:12:34 +0200 -Subject: [PATCH 17/19] arm64: dts: mt7986: add thermal-zones - -Add thermal-zones to mt7986 devicetree. - -Signed-off-by: Daniel Golle -Signed-off-by: Frank Wunderlich -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20230530201235.22330-4-linux@fw-web.de -Signed-off-by: Matthias Brugger ---- - arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 28 +++++++++++++++++++++++ - 1 file changed, 28 insertions(+) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -@@ -603,4 +603,32 @@ - memory-region = <&wmcpu_emi>; - }; - }; -+ -+ thermal-zones { -+ cpu_thermal: cpu-thermal { -+ polling-delay-passive = <1000>; -+ polling-delay = <1000>; -+ thermal-sensors = <&thermal 0>; -+ -+ trips { -+ cpu_trip_active_high: active-high { -+ temperature = <115000>; -+ hysteresis = <2000>; -+ type = "active"; -+ }; -+ -+ cpu_trip_active_low: active-low { -+ temperature = <85000>; -+ hysteresis = <2000>; -+ type = "active"; -+ }; -+ -+ cpu_trip_passive: passive { -+ temperature = <40000>; -+ hysteresis = <2000>; -+ type = "passive"; -+ }; -+ }; -+ }; -+ }; - }; diff --git a/target/linux/mediatek/patches-6.1/018-v6.5-arm64-dts-mt7986-add-pwm-fan-and-cooling-maps-to-BPI.patch b/target/linux/mediatek/patches-6.1/018-v6.5-arm64-dts-mt7986-add-pwm-fan-and-cooling-maps-to-BPI.patch deleted file mode 100644 index ca7d872a1bf..00000000000 --- a/target/linux/mediatek/patches-6.1/018-v6.5-arm64-dts-mt7986-add-pwm-fan-and-cooling-maps-to-BPI.patch +++ /dev/null @@ -1,64 +0,0 @@ -From 5d90603b09e5814ffc38c47e79ccf9bc564f9296 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Tue, 30 May 2023 22:12:35 +0200 -Subject: [PATCH 18/19] arm64: dts: mt7986: add pwm-fan and cooling-maps to - BPI-R3 dts - -Add pwm-fan and cooling-maps to BananaPi-R3 devicetree. - -Signed-off-by: Daniel Golle -Signed-off-by: Frank Wunderlich -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20230530201235.22330-5-linux@fw-web.de -Signed-off-by: Matthias Brugger ---- - .../dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 31 +++++++++++++++++++ - 1 file changed, 31 insertions(+) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts -@@ -38,6 +38,15 @@ - regulator-always-on; - }; - -+ fan: pwm-fan { -+ compatible = "pwm-fan"; -+ #cooling-cells = <2>; -+ /* cooling level (0, 1, 2) - pwm inverted */ -+ cooling-levels = <255 96 0>; -+ pwms = <&pwm 0 10000 0>; -+ status = "okay"; -+ }; -+ - gpio-keys { - compatible = "gpio-keys"; - -@@ -133,6 +142,28 @@ - }; - }; - -+&cpu_thermal { -+ cooling-maps { -+ cpu-active-high { -+ /* active: set fan to cooling level 2 */ -+ cooling-device = <&fan 2 2>; -+ trip = <&cpu_trip_active_high>; -+ }; -+ -+ cpu-active-low { -+ /* active: set fan to cooling level 1 */ -+ cooling-device = <&fan 1 1>; -+ trip = <&cpu_trip_active_low>; -+ }; -+ -+ cpu-passive { -+ /* passive: set fan to cooling level 0 */ -+ cooling-device = <&fan 0 0>; -+ trip = <&cpu_trip_passive>; -+ }; -+ }; -+}; -+ - &crypto { - status = "okay"; - }; diff --git a/target/linux/mediatek/patches-6.1/019-v6.5-arm64-dts-mt7986-increase-bl2-partition-on-NAND-of-B.patch b/target/linux/mediatek/patches-6.1/019-v6.5-arm64-dts-mt7986-increase-bl2-partition-on-NAND-of-B.patch deleted file mode 100644 index 9cc6cad0af5..00000000000 --- a/target/linux/mediatek/patches-6.1/019-v6.5-arm64-dts-mt7986-increase-bl2-partition-on-NAND-of-B.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 6dd3b939370094eb79529683be84500f3c757404 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Tue, 6 Jun 2023 16:43:20 +0100 -Subject: [PATCH 19/19] arm64: dts: mt7986: increase bl2 partition on NAND of - Bananapi R3 - -The bootrom burned into the MT7986 SoC will try multiple locations on -the SPI-NAND flash to load bl2 in case the bl2 image located at the the -previously attempted offset is corrupt. - -Use 0x100000 instead of 0x80000 as partition size for bl2 on SPI-NAND, -allowing for up to four redundant copies of bl2 (typically sized a -bit less than 0x40000). - -Fixes: 8e01fb15b8157 ("arm64: dts: mt7986: add Bananapi R3") -Signed-off-by: Daniel Golle -Link: https://lore.kernel.org/r/ZH9UGF99RgzrHZ88@makrotopia.org -Signed-off-by: Matthias Brugger ---- - .../boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso -@@ -29,13 +29,13 @@ - - partition@0 { - label = "bl2"; -- reg = <0x0 0x80000>; -+ reg = <0x0 0x100000>; - read-only; - }; - -- partition@80000 { -+ partition@100000 { - label = "reserved"; -- reg = <0x80000 0x300000>; -+ reg = <0x100000 0x280000>; - }; - - partition@380000 { diff --git a/target/linux/mediatek/patches-6.1/020-v6.7-arm64-dts-mt7986-define-3W-max-power-to-both-SFP-on-.patch b/target/linux/mediatek/patches-6.1/020-v6.7-arm64-dts-mt7986-define-3W-max-power-to-both-SFP-on-.patch deleted file mode 100644 index 8cba3b2059c..00000000000 --- a/target/linux/mediatek/patches-6.1/020-v6.7-arm64-dts-mt7986-define-3W-max-power-to-both-SFP-on-.patch +++ /dev/null @@ -1,34 +0,0 @@ -From f8ed4088ed9c61ae92193da6130d04c37e7b19f2 Mon Sep 17 00:00:00 2001 -From: Frank Wunderlich -Date: Sun, 20 Aug 2023 17:31:33 +0200 -Subject: [PATCH 20/22] arm64: dts: mt7986: define 3W max power to both SFP on - BPI-R3 - -All SFP power supplies are connected to the system VDD33 which is 3v3/8A. -Set 3A per SFP slot to allow SFPs work which need more power than the -default 1W. - -Fixes: 8e01fb15b815 ("arm64: dts: mt7986: add Bananapi R3") -Signed-off-by: Frank Wunderlich ---- - arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts -@@ -126,6 +126,7 @@ - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp1>; - los-gpios = <&pio 46 GPIO_ACTIVE_HIGH>; -+ maximum-power-milliwatt = <3000>; - mod-def0-gpios = <&pio 49 GPIO_ACTIVE_LOW>; - tx-disable-gpios = <&pio 20 GPIO_ACTIVE_HIGH>; - tx-fault-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; -@@ -137,6 +138,7 @@ - i2c-bus = <&i2c_sfp2>; - los-gpios = <&pio 31 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&pio 47 GPIO_ACTIVE_LOW>; -+ maximum-power-milliwatt = <3000>; - tx-disable-gpios = <&pio 15 GPIO_ACTIVE_HIGH>; - tx-fault-gpios = <&pio 48 GPIO_ACTIVE_HIGH>; - }; diff --git a/target/linux/mediatek/patches-6.1/021-v6.7-arm64-dts-mt7986-change-cooling-trips.patch b/target/linux/mediatek/patches-6.1/021-v6.7-arm64-dts-mt7986-change-cooling-trips.patch deleted file mode 100644 index 318ca43e138..00000000000 --- a/target/linux/mediatek/patches-6.1/021-v6.7-arm64-dts-mt7986-change-cooling-trips.patch +++ /dev/null @@ -1,59 +0,0 @@ -From aa3d6df9803c267725dc72286bb91602b7579882 Mon Sep 17 00:00:00 2001 -From: Frank Wunderlich -Date: Sun, 20 Aug 2023 17:31:34 +0200 -Subject: [PATCH 21/22] arm64: dts: mt7986: change cooling trips - -Add Critical and hot trips for emergency system shutdown and limiting -system load. - -Change passive trip to active to make sure fan is activated on the -lowest trip. - -Fixes: 1f5be05132f3 ("arm64: dts: mt7986: add thermal-zones") -Suggested-by: Daniel Golle -Signed-off-by: Frank Wunderlich ---- - arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 20 ++++++++++++++++---- - 1 file changed, 16 insertions(+), 4 deletions(-) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -@@ -611,22 +611,34 @@ - thermal-sensors = <&thermal 0>; - - trips { -+ cpu_trip_crit: crit { -+ temperature = <125000>; -+ hysteresis = <2000>; -+ type = "critical"; -+ }; -+ -+ cpu_trip_hot: hot { -+ temperature = <120000>; -+ hysteresis = <2000>; -+ type = "hot"; -+ }; -+ - cpu_trip_active_high: active-high { - temperature = <115000>; - hysteresis = <2000>; - type = "active"; - }; - -- cpu_trip_active_low: active-low { -+ cpu_trip_active_med: active-med { - temperature = <85000>; - hysteresis = <2000>; - type = "active"; - }; - -- cpu_trip_passive: passive { -- temperature = <40000>; -+ cpu_trip_active_low: active-low { -+ temperature = <60000>; - hysteresis = <2000>; -- type = "passive"; -+ type = "active"; - }; - }; - }; diff --git a/target/linux/mediatek/patches-6.1/022-v6.7-arm64-dts-mt7986-change-thermal-trips-on-BPI-R3.patch b/target/linux/mediatek/patches-6.1/022-v6.7-arm64-dts-mt7986-change-thermal-trips-on-BPI-R3.patch deleted file mode 100644 index 7166ab6a144..00000000000 --- a/target/linux/mediatek/patches-6.1/022-v6.7-arm64-dts-mt7986-change-thermal-trips-on-BPI-R3.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 6ddf23526955b8dbedfeaa57e691261fd73f9d4e Mon Sep 17 00:00:00 2001 -From: Frank Wunderlich -Date: Sun, 20 Aug 2023 17:31:35 +0200 -Subject: [PATCH 22/22] arm64: dts: mt7986: change thermal trips on BPI-R3 - -Apply new naming after mt7986 thermal trips were changed. - -Fixes: c26f779a2295 ("arm64: dts: mt7986: add pwm-fan and cooling-maps to BPI-R3 dts") -Suggested-by: Daniel Golle -Signed-off-by: Frank Wunderlich ---- - .../boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts -@@ -152,16 +152,16 @@ - trip = <&cpu_trip_active_high>; - }; - -- cpu-active-low { -+ cpu-active-med { - /* active: set fan to cooling level 1 */ - cooling-device = <&fan 1 1>; -- trip = <&cpu_trip_active_low>; -+ trip = <&cpu_trip_active_med>; - }; - -- cpu-passive { -- /* passive: set fan to cooling level 0 */ -+ cpu-active-low { -+ /* active: set fan to cooling level 0 */ - cooling-device = <&fan 0 0>; -- trip = <&cpu_trip_passive>; -+ trip = <&cpu_trip_active_low>; - }; - }; - }; diff --git a/target/linux/mediatek/patches-6.1/041-block-fit-partition-parser.patch b/target/linux/mediatek/patches-6.1/041-block-fit-partition-parser.patch deleted file mode 100644 index bb87c20a91e..00000000000 --- a/target/linux/mediatek/patches-6.1/041-block-fit-partition-parser.patch +++ /dev/null @@ -1,216 +0,0 @@ -From 69357074558daf6ff24c9f58714935e9e095a865 Mon Sep 17 00:00:00 2001 -From: OpenWrt community -Date: Wed, 13 Jul 2022 13:37:33 +0200 -Subject: [PATCH] kernel: add block fit partition parser - ---- - block/blk.h | 2 ++ - block/partitions/Kconfig | 7 +++++++ - block/partitions/Makefile | 1 + - block/partitions/check.h | 3 +++ - block/partitions/core.c | 17 +++++++++++++++++ - block/partitions/efi.c | 8 ++++++++ - block/partitions/efi.h | 3 +++ - block/partitions/msdos.c | 10 ++++++++++ - drivers/mtd/mtd_blkdevs.c | 2 ++ - drivers/mtd/ubi/block.c | 3 +++ - include/linux/msdos_partition.h | 1 + - 11 files changed, 57 insertions(+) - ---- a/block/blk.h -+++ b/block/blk.h -@@ -414,6 +414,8 @@ void blk_free_ext_minor(unsigned int min - #define ADDPART_FLAG_NONE 0 - #define ADDPART_FLAG_RAID 1 - #define ADDPART_FLAG_WHOLEDISK 2 -+#define ADDPART_FLAG_READONLY 4 -+#define ADDPART_FLAG_ROOTDEV 8 - int bdev_add_partition(struct gendisk *disk, int partno, sector_t start, - sector_t length); - int bdev_del_partition(struct gendisk *disk, int partno); ---- a/block/partitions/Kconfig -+++ b/block/partitions/Kconfig -@@ -103,6 +103,13 @@ config ATARI_PARTITION - Say Y here if you would like to use hard disks under Linux which - were partitioned under the Atari OS. - -+config FIT_PARTITION -+ bool "Flattened-Image-Tree (FIT) partition support" if PARTITION_ADVANCED -+ default n -+ help -+ Say Y here if your system needs to mount the filesystem part of -+ a Flattened-Image-Tree (FIT) image commonly used with Das U-Boot. -+ - config IBM_PARTITION - bool "IBM disk label and partition support" - depends on PARTITION_ADVANCED && S390 ---- a/block/partitions/Makefile -+++ b/block/partitions/Makefile -@@ -8,6 +8,7 @@ obj-$(CONFIG_ACORN_PARTITION) += acorn.o - obj-$(CONFIG_AMIGA_PARTITION) += amiga.o - obj-$(CONFIG_ATARI_PARTITION) += atari.o - obj-$(CONFIG_AIX_PARTITION) += aix.o -+obj-$(CONFIG_FIT_PARTITION) += fit.o - obj-$(CONFIG_CMDLINE_PARTITION) += cmdline.o - obj-$(CONFIG_MAC_PARTITION) += mac.o - obj-$(CONFIG_LDM_PARTITION) += ldm.o ---- a/block/partitions/check.h -+++ b/block/partitions/check.h -@@ -57,6 +57,7 @@ int amiga_partition(struct parsed_partit - int atari_partition(struct parsed_partitions *state); - int cmdline_partition(struct parsed_partitions *state); - int efi_partition(struct parsed_partitions *state); -+int fit_partition(struct parsed_partitions *state); - int ibm_partition(struct parsed_partitions *); - int karma_partition(struct parsed_partitions *state); - int ldm_partition(struct parsed_partitions *state); -@@ -67,3 +68,5 @@ int sgi_partition(struct parsed_partitio - int sun_partition(struct parsed_partitions *state); - int sysv68_partition(struct parsed_partitions *state); - int ultrix_partition(struct parsed_partitions *state); -+ -+int parse_fit_partitions(struct parsed_partitions *state, u64 start_sector, u64 nr_sectors, int *slot, int add_remain); ---- a/block/partitions/core.c -+++ b/block/partitions/core.c -@@ -11,6 +11,9 @@ - #include - #include - #include -+#ifdef CONFIG_FIT_PARTITION -+#include -+#endif - - #include "check.h" - -@@ -48,6 +51,9 @@ static int (*check_part[])(struct parsed - #ifdef CONFIG_EFI_PARTITION - efi_partition, /* this must come before msdos */ - #endif -+#ifdef CONFIG_FIT_PARTITION -+ fit_partition, -+#endif - #ifdef CONFIG_SGI_PARTITION - sgi_partition, - #endif -@@ -439,6 +445,11 @@ static struct block_device *add_partitio - goto out_del; - } - -+#ifdef CONFIG_FIT_PARTITION -+ if (flags & ADDPART_FLAG_READONLY) -+ bdev->bd_read_only = true; -+#endif -+ - /* everything is up and running, commence */ - err = xa_insert(&disk->part_tbl, partno, bdev, GFP_KERNEL); - if (err) -@@ -631,6 +642,11 @@ static bool blk_add_partition(struct gen - (state->parts[p].flags & ADDPART_FLAG_RAID)) - md_autodetect_dev(part->bd_dev); - -+#ifdef CONFIG_FIT_PARTITION -+ if ((state->parts[p].flags & ADDPART_FLAG_ROOTDEV) && ROOT_DEV == 0) -+ ROOT_DEV = part->bd_dev; -+#endif -+ - return true; - } - ---- a/block/partitions/efi.c -+++ b/block/partitions/efi.c -@@ -716,6 +716,9 @@ int efi_partition(struct parsed_partitio - gpt_entry *ptes = NULL; - u32 i; - unsigned ssz = queue_logical_block_size(state->disk->queue) / 512; -+#ifdef CONFIG_FIT_PARTITION -+ u32 extra_slot = 64; -+#endif - - if (!find_valid_gpt(state, &gpt, &ptes) || !gpt || !ptes) { - kfree(gpt); -@@ -749,6 +752,11 @@ int efi_partition(struct parsed_partitio - ARRAY_SIZE(ptes[i].partition_name)); - utf16_le_to_7bit(ptes[i].partition_name, label_max, info->volname); - state->parts[i + 1].has_info = true; -+#ifdef CONFIG_FIT_PARTITION -+ /* If this is a U-Boot FIT volume it may have subpartitions */ -+ if (!efi_guidcmp(ptes[i].partition_type_guid, PARTITION_LINUX_FIT_GUID)) -+ (void) parse_fit_partitions(state, start * ssz, size * ssz, &extra_slot, 1); -+#endif - } - kfree(ptes); - kfree(gpt); ---- a/block/partitions/efi.h -+++ b/block/partitions/efi.h -@@ -51,6 +51,9 @@ - #define PARTITION_LINUX_LVM_GUID \ - EFI_GUID( 0xe6d6d379, 0xf507, 0x44c2, \ - 0xa2, 0x3c, 0x23, 0x8f, 0x2a, 0x3d, 0xf9, 0x28) -+#define PARTITION_LINUX_FIT_GUID \ -+ EFI_GUID( 0xcae9be83, 0xb15f, 0x49cc, \ -+ 0x86, 0x3f, 0x08, 0x1b, 0x74, 0x4a, 0x2d, 0x93) - - typedef struct _gpt_header { - __le64 signature; ---- a/block/partitions/msdos.c -+++ b/block/partitions/msdos.c -@@ -564,6 +564,15 @@ static void parse_minix(struct parsed_pa - #endif /* CONFIG_MINIX_SUBPARTITION */ - } - -+static void parse_fit_mbr(struct parsed_partitions *state, -+ sector_t offset, sector_t size, int origin) -+{ -+#ifdef CONFIG_FIT_PARTITION -+ u32 extra_slot = 64; -+ (void) parse_fit_partitions(state, offset, size, &extra_slot, 1); -+#endif /* CONFIG_FIT_PARTITION */ -+} -+ - static struct { - unsigned char id; - void (*parse)(struct parsed_partitions *, sector_t, sector_t, int); -@@ -575,6 +584,7 @@ static struct { - {UNIXWARE_PARTITION, parse_unixware}, - {SOLARIS_X86_PARTITION, parse_solaris_x86}, - {NEW_SOLARIS_X86_PARTITION, parse_solaris_x86}, -+ {FIT_PARTITION, parse_fit_mbr}, - {0, NULL}, - }; - ---- a/drivers/mtd/mtd_blkdevs.c -+++ b/drivers/mtd/mtd_blkdevs.c -@@ -359,7 +359,9 @@ int add_mtd_blktrans_dev(struct mtd_blkt - } else { - snprintf(gd->disk_name, sizeof(gd->disk_name), - "%s%d", tr->name, new->devnum); -- gd->flags |= GENHD_FL_NO_PART; -+ -+ if (!IS_ENABLED(CONFIG_FIT_PARTITION) || mtd_type_is_nand(new->mtd)) -+ gd->flags |= GENHD_FL_NO_PART; - } - - set_capacity(gd, ((u64)new->size * tr->blksize) >> 9); ---- a/drivers/mtd/ubi/block.c -+++ b/drivers/mtd/ubi/block.c -@@ -432,7 +432,9 @@ int ubiblock_create(struct ubi_volume_in - ret = -ENODEV; - goto out_cleanup_disk; - } -- gd->flags |= GENHD_FL_NO_PART; -+ if (!IS_ENABLED(CONFIG_FIT_PARTITION)) -+ gd->flags |= GENHD_FL_NO_PART; -+ - gd->private_data = dev; - sprintf(gd->disk_name, "ubiblock%d_%d", dev->ubi_num, dev->vol_id); - set_capacity(gd, disk_capacity); ---- a/include/linux/msdos_partition.h -+++ b/include/linux/msdos_partition.h -@@ -31,6 +31,7 @@ enum msdos_sys_ind { - LINUX_LVM_PARTITION = 0x8e, - LINUX_RAID_PARTITION = 0xfd, /* autodetect RAID partition */ - -+ FIT_PARTITION = 0x2e, /* U-Boot uImage.FIT */ - SOLARIS_X86_PARTITION = 0x82, /* also Linux swap partitions */ - NEW_SOLARIS_X86_PARTITION = 0xbf, - diff --git a/target/linux/mediatek/patches-6.1/100-dts-update-mt7622-rfb1.patch b/target/linux/mediatek/patches-6.1/100-dts-update-mt7622-rfb1.patch deleted file mode 100644 index 1eeed82c1b4..00000000000 --- a/target/linux/mediatek/patches-6.1/100-dts-update-mt7622-rfb1.patch +++ /dev/null @@ -1,107 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts -@@ -1,7 +1,6 @@ - /* -- * Copyright (c) 2017 MediaTek Inc. -- * Author: Ming Huang -- * Sean Wang -+ * Copyright (c) 2018 MediaTek Inc. -+ * Author: Ryder Lee - * - * SPDX-License-Identifier: (GPL-2.0 OR MIT) - */ -@@ -24,7 +23,7 @@ - - chosen { - stdout-path = "serial0:115200n8"; -- bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512"; -+ bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512"; - }; - - cpus { -@@ -45,18 +44,18 @@ - key-factory { - label = "factory"; - linux,code = ; -- gpios = <&pio 0 0>; -+ gpios = <&pio 0 GPIO_ACTIVE_LOW>; - }; - - key-wps { - label = "wps"; - linux,code = ; -- gpios = <&pio 102 0>; -+ gpios = <&pio 102 GPIO_ACTIVE_LOW>; - }; - }; - - memory@40000000 { -- reg = <0 0x40000000 0 0x20000000>; -+ reg = <0 0x40000000 0 0x40000000>; - device_type = "memory"; - }; - -@@ -133,22 +132,22 @@ - - port@0 { - reg = <0>; -- label = "lan0"; -+ label = "lan1"; - }; - - port@1 { - reg = <1>; -- label = "lan1"; -+ label = "lan2"; - }; - - port@2 { - reg = <2>; -- label = "lan2"; -+ label = "lan3"; - }; - - port@3 { - reg = <3>; -- label = "lan3"; -+ label = "lan4"; - }; - - port@4 { -@@ -241,7 +240,22 @@ - status = "okay"; - }; - -+&pcie1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pcie1_pins>; -+ status = "okay"; -+}; -+ - &pio { -+ /* Attention: GPIO 90 is used to switch between PCIe@1,0 and -+ * SATA functions. i.e. output-high: PCIe, output-low: SATA -+ */ -+ asm_sel { -+ gpio-hog; -+ gpios = <90 GPIO_ACTIVE_HIGH>; -+ output-high; -+ }; -+ - /* eMMC is shared pin with parallel NAND */ - emmc_pins_default: emmc-pins-default { - mux { -@@ -518,11 +532,11 @@ - }; - - &sata { -- status = "okay"; -+ status = "disabled"; - }; - - &sata_phy { -- status = "okay"; -+ status = "disabled"; - }; - - &spi0 { diff --git a/target/linux/mediatek/patches-6.1/101-dts-update-mt7629-rfb.patch b/target/linux/mediatek/patches-6.1/101-dts-update-mt7629-rfb.patch deleted file mode 100644 index b1770371b00..00000000000 --- a/target/linux/mediatek/patches-6.1/101-dts-update-mt7629-rfb.patch +++ /dev/null @@ -1,60 +0,0 @@ ---- a/arch/arm/boot/dts/mt7629-rfb.dts -+++ b/arch/arm/boot/dts/mt7629-rfb.dts -@@ -18,6 +18,7 @@ - - chosen { - stdout-path = "serial0:115200n8"; -+ bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8"; - }; - - gpio-keys { -@@ -70,6 +71,10 @@ - compatible = "mediatek,eth-mac"; - reg = <0>; - phy-mode = "2500base-x"; -+ -+ nvmem-cells = <&macaddr_factory_2a>; -+ nvmem-cell-names = "mac-address"; -+ - fixed-link { - speed = <2500>; - full-duplex; -@@ -82,6 +87,9 @@ - reg = <1>; - phy-mode = "gmii"; - phy-handle = <&phy0>; -+ -+ nvmem-cells = <&macaddr_factory_24>; -+ nvmem-cell-names = "mac-address"; - }; - - mdio: mdio-bus { -@@ -133,8 +141,9 @@ - }; - - partition@b0000 { -- label = "kernel"; -+ label = "firmware"; - reg = <0xb0000 0xb50000>; -+ compatible = "denx,fit"; - }; - }; - }; -@@ -273,3 +282,17 @@ - pinctrl-0 = <&watchdog_pins>; - status = "okay"; - }; -+ -+&factory { -+ compatible = "nvmem-cells"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ macaddr_factory_24: macaddr@24 { -+ reg = <0x24 0x6>; -+ }; -+ -+ macaddr_factory_2a: macaddr@2a { -+ reg = <0x2a 0x6>; -+ }; -+}; diff --git a/target/linux/mediatek/patches-6.1/103-mt7623-enable-arch-timer.patch b/target/linux/mediatek/patches-6.1/103-mt7623-enable-arch-timer.patch deleted file mode 100644 index 04df7b927b1..00000000000 --- a/target/linux/mediatek/patches-6.1/103-mt7623-enable-arch-timer.patch +++ /dev/null @@ -1,20 +0,0 @@ -From d6a596012150960f0f3a214d31bbac4b607dbd1e Mon Sep 17 00:00:00 2001 -From: Chuanhong Guo -Date: Fri, 29 Apr 2022 10:40:56 +0800 -Subject: [PATCH] arm: mediatek: select arch timer for mt7623 - -Signed-off-by: Chuanhong Guo ---- - arch/arm/mach-mediatek/Kconfig | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/mach-mediatek/Kconfig -+++ b/arch/arm/mach-mediatek/Kconfig -@@ -26,6 +26,7 @@ config MACH_MT6592 - config MACH_MT7623 - bool "MediaTek MT7623 SoCs support" - default ARCH_MEDIATEK -+ select HAVE_ARM_ARCH_TIMER - - config MACH_MT7629 - bool "MediaTek MT7629 SoCs support" diff --git a/target/linux/mediatek/patches-6.1/104-mt7622-add-snor-irq.patch b/target/linux/mediatek/patches-6.1/104-mt7622-add-snor-irq.patch deleted file mode 100644 index 0d9c91f44dd..00000000000 --- a/target/linux/mediatek/patches-6.1/104-mt7622-add-snor-irq.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi -@@ -578,6 +578,7 @@ - compatible = "mediatek,mt7622-nor", - "mediatek,mt8173-nor"; - reg = <0 0x11014000 0 0xe0>; -+ interrupts = ; - clocks = <&pericfg CLK_PERI_FLASH_PD>, - <&topckgen CLK_TOP_FLASH_SEL>; - clock-names = "spi", "sf"; diff --git a/target/linux/mediatek/patches-6.1/105-dts-mt7622-enable-pstore.patch b/target/linux/mediatek/patches-6.1/105-dts-mt7622-enable-pstore.patch deleted file mode 100644 index 93da722e724..00000000000 --- a/target/linux/mediatek/patches-6.1/105-dts-mt7622-enable-pstore.patch +++ /dev/null @@ -1,16 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi -@@ -134,6 +134,13 @@ - #size-cells = <2>; - ranges; - -+ /* 64 KiB reserved for ramoops/pstore */ -+ ramoops@42ff0000 { -+ compatible = "ramoops"; -+ reg = <0 0x42ff0000 0 0x10000>; -+ record-size = <0x1000>; -+ }; -+ - /* 192 KiB reserved for ARM Trusted Firmware (BL31) */ - secmon_reserved: secmon@43000000 { - reg = <0 0x43000000 0 0x30000>; diff --git a/target/linux/mediatek/patches-6.1/106-dts-mt7622-disable_btif.patch b/target/linux/mediatek/patches-6.1/106-dts-mt7622-disable_btif.patch deleted file mode 100644 index ac8594b3963..00000000000 --- a/target/linux/mediatek/patches-6.1/106-dts-mt7622-disable_btif.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -@@ -109,10 +109,6 @@ - status = "disabled"; - }; - --&btif { -- status = "okay"; --}; -- - &cir { - pinctrl-names = "default"; - pinctrl-0 = <&irrx_pins>; ---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts -@@ -90,10 +90,6 @@ - status = "disabled"; - }; - --&btif { -- status = "okay"; --}; -- - &cir { - pinctrl-names = "default"; - pinctrl-0 = <&irrx_pins>; diff --git a/target/linux/mediatek/patches-6.1/110-dts-fix-bpi2-console.patch b/target/linux/mediatek/patches-6.1/110-dts-fix-bpi2-console.patch deleted file mode 100644 index 8dc53d2985f..00000000000 --- a/target/linux/mediatek/patches-6.1/110-dts-fix-bpi2-console.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts -+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts -@@ -19,6 +19,7 @@ - - chosen { - stdout-path = "serial2:115200n8"; -+ bootargs = "console=ttyS2,115200n8 console=tty1"; - }; - - connector { diff --git a/target/linux/mediatek/patches-6.1/111-dts-fix-bpi64-console.patch b/target/linux/mediatek/patches-6.1/111-dts-fix-bpi64-console.patch deleted file mode 100644 index f77f10cb955..00000000000 --- a/target/linux/mediatek/patches-6.1/111-dts-fix-bpi64-console.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -@@ -24,7 +24,7 @@ - - chosen { - stdout-path = "serial0:115200n8"; -- bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512"; -+ bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512"; - }; - - cpus { diff --git a/target/linux/mediatek/patches-6.1/112-dts-fix-bpi64-lan-names.patch b/target/linux/mediatek/patches-6.1/112-dts-fix-bpi64-lan-names.patch deleted file mode 100644 index 2cc0efdadec..00000000000 --- a/target/linux/mediatek/patches-6.1/112-dts-fix-bpi64-lan-names.patch +++ /dev/null @@ -1,37 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -@@ -20,6 +20,7 @@ - - aliases { - serial0 = &uart0; -+ ethernet0 = &gmac0; - }; - - chosen { -@@ -161,22 +162,22 @@ - - port@1 { - reg = <1>; -- label = "lan0"; -+ label = "lan1"; - }; - - port@2 { - reg = <2>; -- label = "lan1"; -+ label = "lan2"; - }; - - port@3 { - reg = <3>; -- label = "lan2"; -+ label = "lan3"; - }; - - port@4 { - reg = <4>; -- label = "lan3"; -+ label = "lan4"; - }; - - port@6 { diff --git a/target/linux/mediatek/patches-6.1/113-dts-fix-bpi64-leds-and-buttons.patch b/target/linux/mediatek/patches-6.1/113-dts-fix-bpi64-leds-and-buttons.patch deleted file mode 100644 index 1cca6f35341..00000000000 --- a/target/linux/mediatek/patches-6.1/113-dts-fix-bpi64-leds-and-buttons.patch +++ /dev/null @@ -1,49 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -@@ -21,6 +21,12 @@ - aliases { - serial0 = &uart0; - ethernet0 = &gmac0; -+ led-boot = &led_system_green; -+ led-failsafe = &led_system_blue; -+ led-running = &led_system_green; -+ led-upgrade = &led_system_blue; -+ mmc0 = &mmc0; -+ mmc1 = &mmc1; - }; - - chosen { -@@ -44,8 +50,8 @@ - compatible = "gpio-keys"; - - factory-key { -- label = "factory"; -- linux,code = ; -+ label = "reset"; -+ linux,code = ; - gpios = <&pio 0 GPIO_ACTIVE_HIGH>; - }; - -@@ -59,17 +65,17 @@ - leds { - compatible = "gpio-leds"; - -- led-0 { -+ led_system_green: led-0 { - label = "bpi-r64:pio:green"; - color = ; - gpios = <&pio 89 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - -- led-1 { -- label = "bpi-r64:pio:red"; -- color = ; -- gpios = <&pio 88 GPIO_ACTIVE_HIGH>; -+ led_system_blue: led-1 { -+ label = "bpi-r64:pio:blue"; -+ color = ; -+ gpios = <&pio 85 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; diff --git a/target/linux/mediatek/patches-6.1/114-dts-bpi64-disable-rtc.patch b/target/linux/mediatek/patches-6.1/114-dts-bpi64-disable-rtc.patch deleted file mode 100644 index 119de1c4576..00000000000 --- a/target/linux/mediatek/patches-6.1/114-dts-bpi64-disable-rtc.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -@@ -557,12 +557,16 @@ - status = "okay"; - }; - -+&rtc { -+ status = "disabled"; -+}; -+ - &sata { -- status = "disable"; -+ status = "disabled"; - }; - - &sata_phy { -- status = "disable"; -+ status = "disabled"; - }; - - &spi0 { diff --git a/target/linux/mediatek/patches-6.1/115-v6.5-arm64-dts-mt7622-declare-SPI-NAND-present-on-BPI-R64.patch b/target/linux/mediatek/patches-6.1/115-v6.5-arm64-dts-mt7622-declare-SPI-NAND-present-on-BPI-R64.patch deleted file mode 100644 index 6eac51f825b..00000000000 --- a/target/linux/mediatek/patches-6.1/115-v6.5-arm64-dts-mt7622-declare-SPI-NAND-present-on-BPI-R64.patch +++ /dev/null @@ -1,70 +0,0 @@ -From d278f43f25beedfd0cb784d1dd0a9e7e8c8f123f Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Wed, 19 Apr 2023 20:15:53 +0100 -Subject: [PATCH] arm64: dts: mt7622: declare SPI-NAND present on BPI-R64 - -The SPI-NOR node in the device tree of the BananaPi R64 has most likely -been copied from the reference board's device tree even though the R64 -comes with an SPI-NAND chip rather than SPI-NOR. - -Setup the Serial NAND Flash Interface (SNFI) controller, enable -hardware BCH error detection and correction engine and add the SPI-NAND -chip including basic partitions, - -Signed-off-by: Daniel Golle -Link: https://lore.kernel.org/r/ZEA96dmaXqTpk8u8@makrotopia.org -Signed-off-by: Matthias Brugger ---- - .../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 38 ++++++++++++++++--- - 1 file changed, 33 insertions(+), 5 deletions(-) - ---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -@@ -254,14 +254,42 @@ - status = "disabled"; - }; - --&nor_flash { -- pinctrl-names = "default"; -- pinctrl-0 = <&spi_nor_pins>; -- status = "disabled"; -+&bch { -+ status = "okay"; -+}; - -+&snfi { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&serial_nand_pins>; -+ status = "okay"; - flash@0 { -- compatible = "jedec,spi-nor"; -+ compatible = "spi-nand"; - reg = <0>; -+ spi-tx-bus-width = <4>; -+ spi-rx-bus-width = <4>; -+ nand-ecc-engine = <&snfi>; -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "bl2"; -+ reg = <0x0 0x80000>; -+ read-only; -+ }; -+ -+ partition@80000 { -+ label = "fip"; -+ reg = <0x80000 0x200000>; -+ read-only; -+ }; -+ -+ ubi: partition@280000 { -+ label = "ubi"; -+ reg = <0x280000 0x7d80000>; -+ }; -+ }; - }; - }; - diff --git a/target/linux/mediatek/patches-6.1/121-hack-spi-nand-1b-bbm.patch b/target/linux/mediatek/patches-6.1/121-hack-spi-nand-1b-bbm.patch deleted file mode 100644 index ff5521c44ea..00000000000 --- a/target/linux/mediatek/patches-6.1/121-hack-spi-nand-1b-bbm.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/mtd/nand/spi/core.c -+++ b/drivers/mtd/nand/spi/core.c -@@ -724,7 +724,7 @@ static int spinand_mtd_write(struct mtd_ - static bool spinand_isbad(struct nand_device *nand, const struct nand_pos *pos) - { - struct spinand_device *spinand = nand_to_spinand(nand); -- u8 marker[2] = { }; -+ u8 marker[1] = { }; - struct nand_page_io_req req = { - .pos = *pos, - .ooblen = sizeof(marker), -@@ -735,7 +735,7 @@ static bool spinand_isbad(struct nand_de - - spinand_select_target(spinand, pos->target); - spinand_read_page(spinand, &req); -- if (marker[0] != 0xff || marker[1] != 0xff) -+ if (marker[0] != 0xff) - return true; - - return false; diff --git a/target/linux/mediatek/patches-6.1/130-dts-mt7629-add-snand-support.patch b/target/linux/mediatek/patches-6.1/130-dts-mt7629-add-snand-support.patch deleted file mode 100644 index 82654e683c3..00000000000 --- a/target/linux/mediatek/patches-6.1/130-dts-mt7629-add-snand-support.patch +++ /dev/null @@ -1,94 +0,0 @@ -From c813fbe806257c574240770ef716fbee19f7dbfa Mon Sep 17 00:00:00 2001 -From: Xiangsheng Hou -Date: Thu, 6 Jun 2019 16:29:04 +0800 -Subject: [PATCH] spi: spi-mem: Mediatek: Add SPI Nand support for MT7629 - -Signed-off-by: Xiangsheng Hou ---- - arch/arm/boot/dts/mt7629-rfb.dts | 45 ++++++++++++++++++++++++++++++++ - arch/arm/boot/dts/mt7629.dtsi | 22 ++++++++++++++++ - 3 files changed, 79 insertions(+) - ---- a/arch/arm/boot/dts/mt7629.dtsi -+++ b/arch/arm/boot/dts/mt7629.dtsi -@@ -272,6 +272,27 @@ - status = "disabled"; - }; - -+ snfi: spi@1100d000 { -+ compatible = "mediatek,mt7629-snand"; -+ reg = <0x1100d000 0x1000>; -+ interrupts = ; -+ clocks = <&pericfg CLK_PERI_NFI_PD>, <&pericfg CLK_PERI_SNFI_PD>; -+ clock-names = "nfi_clk", "pad_clk"; -+ nand-ecc-engine = <&bch>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ -+ bch: ecc@1100e000 { -+ compatible = "mediatek,mt7622-ecc"; -+ reg = <0x1100e000 0x1000>; -+ interrupts = ; -+ clocks = <&pericfg CLK_PERI_NFIECC_PD>; -+ clock-names = "nfiecc_clk"; -+ status = "disabled"; -+ }; -+ - spi: spi@1100a000 { - compatible = "mediatek,mt7629-spi", - "mediatek,mt7622-spi"; ---- a/arch/arm/boot/dts/mt7629-rfb.dts -+++ b/arch/arm/boot/dts/mt7629-rfb.dts -@@ -255,6 +255,50 @@ - }; - }; - -+&bch { -+ status = "okay"; -+}; -+ -+&snfi { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&serial_nand_pins>; -+ status = "okay"; -+ flash@0 { -+ compatible = "spi-nand"; -+ reg = <0>; -+ spi-tx-bus-width = <4>; -+ spi-rx-bus-width = <4>; -+ nand-ecc-engine = <&snfi>; -+ -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "Bootloader"; -+ reg = <0x00000 0x0100000>; -+ read-only; -+ }; -+ -+ partition@100000 { -+ label = "Config"; -+ reg = <0x100000 0x0040000>; -+ }; -+ -+ partition@140000 { -+ label = "factory"; -+ reg = <0x140000 0x0080000>; -+ }; -+ -+ partition@1c0000 { -+ label = "firmware"; -+ reg = <0x1c0000 0x1000000>; -+ }; -+ }; -+ }; -+}; -+ - &spi { - pinctrl-names = "default"; - pinctrl-0 = <&spi_pins>; diff --git a/target/linux/mediatek/patches-6.1/131-dts-mt7622-add-snand-support.patch b/target/linux/mediatek/patches-6.1/131-dts-mt7622-add-snand-support.patch deleted file mode 100644 index 1a0e3237c8a..00000000000 --- a/target/linux/mediatek/patches-6.1/131-dts-mt7622-add-snand-support.patch +++ /dev/null @@ -1,68 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts -@@ -535,6 +535,65 @@ - status = "disabled"; - }; - -+&bch { -+ status = "okay"; -+}; -+ -+&snfi { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&serial_nand_pins>; -+ status = "okay"; -+ flash@0 { -+ compatible = "spi-nand"; -+ reg = <0>; -+ spi-tx-bus-width = <4>; -+ spi-rx-bus-width = <4>; -+ nand-ecc-engine = <&snfi>; -+ -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "Preloader"; -+ reg = <0x00000 0x0080000>; -+ read-only; -+ }; -+ -+ partition@80000 { -+ label = "ATF"; -+ reg = <0x80000 0x0040000>; -+ }; -+ -+ partition@c0000 { -+ label = "Bootloader"; -+ reg = <0xc0000 0x0080000>; -+ }; -+ -+ partition@140000 { -+ label = "Config"; -+ reg = <0x140000 0x0080000>; -+ }; -+ -+ partition@1c0000 { -+ label = "Factory"; -+ reg = <0x1c0000 0x0100000>; -+ }; -+ -+ partition@200000 { -+ label = "firmware"; -+ reg = <0x2c0000 0x2000000>; -+ }; -+ -+ partition@2200000 { -+ label = "User_data"; -+ reg = <0x22c0000 0x4000000>; -+ }; -+ }; -+ }; -+}; -+ - &spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spic0_pins>; diff --git a/target/linux/mediatek/patches-6.1/140-dts-fix-wmac-support-for-mt7622-rfb1.patch b/target/linux/mediatek/patches-6.1/140-dts-fix-wmac-support-for-mt7622-rfb1.patch deleted file mode 100644 index 208046ad16c..00000000000 --- a/target/linux/mediatek/patches-6.1/140-dts-fix-wmac-support-for-mt7622-rfb1.patch +++ /dev/null @@ -1,18 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts -@@ -576,7 +576,7 @@ - reg = <0x140000 0x0080000>; - }; - -- partition@1c0000 { -+ factory: partition@1c0000 { - label = "Factory"; - reg = <0x1c0000 0x0100000>; - }; -@@ -637,5 +637,6 @@ - &wmac { - pinctrl-names = "default"; - pinctrl-0 = <&wmac_pins>; -+ mediatek,mtd-eeprom = <&factory 0x0000>; - status = "okay"; - }; diff --git a/target/linux/mediatek/patches-6.1/150-dts-mt7623-eip97-inside-secure-support.patch b/target/linux/mediatek/patches-6.1/150-dts-mt7623-eip97-inside-secure-support.patch deleted file mode 100644 index 0860a22c37f..00000000000 --- a/target/linux/mediatek/patches-6.1/150-dts-mt7623-eip97-inside-secure-support.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/arch/arm/boot/dts/mt7623.dtsi -+++ b/arch/arm/boot/dts/mt7623.dtsi -@@ -984,17 +984,15 @@ - }; - - crypto: crypto@1b240000 { -- compatible = "mediatek,eip97-crypto"; -+ compatible = "inside-secure,safexcel-eip97"; - reg = <0 0x1b240000 0 0x20000>; - interrupts = , - , - , -- , -- ; -+ ; -+ interrupt-names = "ring0", "ring1", "ring2", "ring3"; - clocks = <ðsys CLK_ETHSYS_CRYPTO>; -- clock-names = "cryp"; -- power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; -- status = "disabled"; -+ status = "okay"; - }; - - bdpsys: syscon@1c000000 { diff --git a/target/linux/mediatek/patches-6.1/160-dts-mt7623-bpi-r2-earlycon.patch b/target/linux/mediatek/patches-6.1/160-dts-mt7623-bpi-r2-earlycon.patch deleted file mode 100644 index 091cffc3c07..00000000000 --- a/target/linux/mediatek/patches-6.1/160-dts-mt7623-bpi-r2-earlycon.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts -+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts -@@ -19,7 +19,7 @@ - - chosen { - stdout-path = "serial2:115200n8"; -- bootargs = "console=ttyS2,115200n8 console=tty1"; -+ bootargs = "earlycon=uart8250,mmio32,0x11004000 console=ttyS2,115200n8 console=tty1"; - }; - - connector { diff --git a/target/linux/mediatek/patches-6.1/161-dts-mt7623-bpi-r2-mmc-device-order.patch b/target/linux/mediatek/patches-6.1/161-dts-mt7623-bpi-r2-mmc-device-order.patch deleted file mode 100644 index d1bafc15260..00000000000 --- a/target/linux/mediatek/patches-6.1/161-dts-mt7623-bpi-r2-mmc-device-order.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts -+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts -@@ -15,6 +15,8 @@ - - aliases { - serial2 = &uart2; -+ mmc0 = &mmc0; -+ mmc1 = &mmc1; - }; - - chosen { diff --git a/target/linux/mediatek/patches-6.1/162-dts-mt7623-bpi-r2-led-aliases.patch b/target/linux/mediatek/patches-6.1/162-dts-mt7623-bpi-r2-led-aliases.patch deleted file mode 100644 index f6745add5b3..00000000000 --- a/target/linux/mediatek/patches-6.1/162-dts-mt7623-bpi-r2-led-aliases.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts -+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts -@@ -17,6 +17,10 @@ - serial2 = &uart2; - mmc0 = &mmc0; - mmc1 = &mmc1; -+ led-boot = &led_system_green; -+ led-failsafe = &led_system_blue; -+ led-running = &led_system_green; -+ led-upgrade = &led_system_blue; - }; - - chosen { -@@ -112,13 +116,13 @@ - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_a>; - -- blue { -+ led_system_blue: blue { - label = "bpi-r2:pio:blue"; - gpios = <&pio 240 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - -- green { -+ led_system_green: green { - label = "bpi-r2:pio:green"; - gpios = <&pio 241 GPIO_ACTIVE_LOW>; - default-state = "off"; diff --git a/target/linux/mediatek/patches-6.1/163-dts-mt7623-bpi-r2-ethernet-alias.patch b/target/linux/mediatek/patches-6.1/163-dts-mt7623-bpi-r2-ethernet-alias.patch deleted file mode 100644 index b1dd75a4140..00000000000 --- a/target/linux/mediatek/patches-6.1/163-dts-mt7623-bpi-r2-ethernet-alias.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts -+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts -@@ -15,6 +15,7 @@ - - aliases { - serial2 = &uart2; -+ ethernet0 = &gmac0; - mmc0 = &mmc0; - mmc1 = &mmc1; - led-boot = &led_system_green; diff --git a/target/linux/mediatek/patches-6.1/164-dts-mt7623-bpi-r2-rootdisk-for-fitblk.patch b/target/linux/mediatek/patches-6.1/164-dts-mt7623-bpi-r2-rootdisk-for-fitblk.patch deleted file mode 100644 index f617211c9aa..00000000000 --- a/target/linux/mediatek/patches-6.1/164-dts-mt7623-bpi-r2-rootdisk-for-fitblk.patch +++ /dev/null @@ -1,55 +0,0 @@ ---- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts -+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts -@@ -26,7 +26,9 @@ - - chosen { - stdout-path = "serial2:115200n8"; -- bootargs = "earlycon=uart8250,mmio32,0x11004000 console=ttyS2,115200n8 console=tty1"; -+ bootargs = "root=/dev/fit0 rootwait earlycon=uart8250,mmio32,0x11004000 console=ttyS2,115200n8 console=tty1"; -+ rootdisk-emmc = <&emmc_rootdisk>; -+ rootdisk-sd = <&sd_rootdisk>; - }; - - connector { -@@ -315,6 +317,20 @@ - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_1p8v>; - non-removable; -+ -+ card@0 { -+ compatible = "mmc-card"; -+ reg = <0>; -+ -+ block { -+ compatible = "block-device"; -+ partitions { -+ emmc_rootdisk: block-partition-fit { -+ partno = <3>; -+ }; -+ }; -+ }; -+ }; - }; - - &mmc1 { -@@ -328,6 +344,20 @@ - cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>; - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_3p3v>; -+ -+ card@0 { -+ compatible = "mmc-card"; -+ reg = <0>; -+ -+ block { -+ compatible = "block-device"; -+ partitions { -+ sd_rootdisk: block-partition-fit { -+ partno = <3>; -+ }; -+ }; -+ }; -+ }; - }; - - &mt6323_leds { diff --git a/target/linux/mediatek/patches-6.1/180-v6.5-arm64-dts-mt7622-handle-interrupts-from-MT7531-switc.patch b/target/linux/mediatek/patches-6.1/180-v6.5-arm64-dts-mt7622-handle-interrupts-from-MT7531-switc.patch deleted file mode 100644 index d396d38f203..00000000000 --- a/target/linux/mediatek/patches-6.1/180-v6.5-arm64-dts-mt7622-handle-interrupts-from-MT7531-switc.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 983f37ee08acb60435744f1b1e2afea2d2a09c48 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Wed, 19 Apr 2023 20:16:29 +0100 -Subject: [PATCH] arm64: dts: mt7622: handle interrupts from MT7531 switch on - BPI-R64 - -Since commit ba751e28d442 ("net: dsa: mt7530: add interrupt support") -the mt7530 driver can act as an interrupt controller. Wire up irq line -of the MT7531 switch on the BananaPi BPi-R64 board, so the status of -the PHYs of the five 1000Base-T ports doesn't need to be polled any -more. - -Signed-off-by: Daniel Golle -Link: https://lore.kernel.org/r/ZEA-DV_OsmFg5egL@makrotopia.org -Signed-off-by: Matthias Brugger ---- - arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -@@ -155,6 +155,10 @@ - switch@0 { - compatible = "mediatek,mt7531"; - reg = <0>; -+ interrupt-controller; -+ #interrupt-cells = <1>; -+ interrupt-parent = <&pio>; -+ interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; - reset-gpios = <&pio 54 0>; - - ports { diff --git a/target/linux/mediatek/patches-6.1/190-arm64-dts-mediatek-mt7622-fix-GICv2-range.patch b/target/linux/mediatek/patches-6.1/190-arm64-dts-mediatek-mt7622-fix-GICv2-range.patch deleted file mode 100644 index 1e04d23a0e9..00000000000 --- a/target/linux/mediatek/patches-6.1/190-arm64-dts-mediatek-mt7622-fix-GICv2-range.patch +++ /dev/null @@ -1,106 +0,0 @@ -From patchwork Tue Apr 26 19:51:36 2022 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -X-Patchwork-Submitter: Daniel Golle -X-Patchwork-Id: 12827872 -Return-Path: - -X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on - aws-us-west-2-korg-lkml-1.web.codeaurora.org -Received: from bombadil.infradead.org (bombadil.infradead.org - [198.137.202.133]) - (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) - (No client certificate requested) - by smtp.lore.kernel.org (Postfix) with ESMTPS id BACF3C433EF - for ; - Tue, 26 Apr 2022 19:53:05 +0000 (UTC) -DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; - d=lists.infradead.org; s=bombadil.20210309; h=Sender: - Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: - List-Archive:List-Unsubscribe:List-Id:MIME-Version:Message-ID:Subject:Cc:To: - From:Date:Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From: - Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:In-Reply-To:References: - List-Owner; bh=OWGSxvlKoyPWz6b629RNINucULo6oOdFssAIiJETWRg=; b=T0HEjee0FX3hlb - x5jl7xLK5sKM0pkE2oRgwzthbFlNg8ST1j/2GkgcgT0S2Bi0vRfFxHeu/RKzS9RmiVnKJnPGL8ctg - WoBLyO5i+NcmosGoy6MmoOjGTNhj/+3q3Z1jRLBSJ4ySSP22X77YeuJTmVzySPUllQhWvDhjMVCR9 - QBRmQdc6gCAg3IYGEbWwS2TG+UHveDCeZRWxMzrwI8UPadNCRFROwugmiQ3mdU41lHCTDpnlfuRJh - o1igLKfMBLz+D8rFYvDh7FfkcKkY6lNoswA2HKUun1MEzgoyQKmITPnG2maX/BvJJuj/B3ZJShh4k - AZHmXoQxq1mrsm2FxfnQ==; -Received: from localhost ([::1] helo=bombadil.infradead.org) - by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) - id 1njRE5-00G05D-9z; Tue, 26 Apr 2022 19:51:57 +0000 -Received: from fudo.makrotopia.org ([2a07:2ec0:3002::71]) - by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) - id 1njRE1-00G03h-9H; Tue, 26 Apr 2022 19:51:55 +0000 -Received: from local - by fudo.makrotopia.org with esmtpsa (TLS1.3:TLS_AES_256_GCM_SHA384:256) - (Exim 4.94.2) (envelope-from ) - id 1njRDu-0006aF-4F; Tue, 26 Apr 2022 21:51:46 +0200 -Date: Tue, 26 Apr 2022 20:51:36 +0100 -From: Daniel Golle -To: devicetree@vger.kernel.org, linux-mediatek@lists.infradead.org, - linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org -Cc: Rob Herring , - Krzysztof Kozlowski , - Matthias Brugger -Subject: [PATCH] arm64: dts: mediatek: mt7622: fix GICv2 range -Message-ID: -MIME-Version: 1.0 -Content-Disposition: inline -X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 -X-CRM114-CacheID: sfid-20220426_125153_359242_EA3D452C -X-CRM114-Status: GOOD ( 12.45 ) -X-BeenThere: linux-arm-kernel@lists.infradead.org -X-Mailman-Version: 2.1.34 -Precedence: list -List-Id: -List-Unsubscribe: - , - -List-Archive: -List-Post: -List-Help: -List-Subscribe: - , - -Sender: "linux-arm-kernel" -Errors-To: - linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org - -With the current range specified for the CPU interface there is an -error message at boot: - -GIC: GICv2 detected, but range too small and irqchip.gicv2_force_probe not set - -Setting irqchip.gicv2_force_probe=1 in bootargs results in: - -GIC: Aliased GICv2 at 0x0000000010320000, trying to find the canonical range over 128kB -GIC: Adjusting CPU interface base to 0x000000001032f000 -GIC: Using split EOI/Deactivate mode - -Using the adjusted CPU interface base and 8K size results in only the -final line remaining and fully working system as well as /proc/interrupts -showing additional IPI3,4,5,6: - -IPI3: 0 0 CPU stop (for crash dump) interrupts -IPI4: 0 0 Timer broadcast interrupts -IPI5: 0 0 IRQ work interrupts -IPI6: 0 0 CPU wake-up interrupts - -Signed-off-by: Daniel Golle ---- - arch/arm64/boot/dts/mediatek/mt7622.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi -@@ -346,7 +346,7 @@ - #interrupt-cells = <3>; - interrupt-parent = <&gic>; - reg = <0 0x10310000 0 0x1000>, -- <0 0x10320000 0 0x1000>, -+ <0 0x1032f000 0 0x2000>, - <0 0x10340000 0 0x2000>, - <0 0x10360000 0 0x2000>; - }; diff --git a/target/linux/mediatek/patches-6.1/193-dts-mt7623-thermal_zone_fix.patch b/target/linux/mediatek/patches-6.1/193-dts-mt7623-thermal_zone_fix.patch deleted file mode 100644 index 1cfb53d6208..00000000000 --- a/target/linux/mediatek/patches-6.1/193-dts-mt7623-thermal_zone_fix.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 824d56e753a588fcfd650db1822e34a02a48bb77 Mon Sep 17 00:00:00 2001 -From: Bruno Umuarama -Date: Thu, 13 Oct 2022 21:18:21 +0000 -Subject: [PATCH] mediatek: mt7623: fix thermal zone -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Raising the temperatures for passive and active trips. @VA1DER -proposed at issue 9396 to remove passive trip. This commit relates to -his suggestion. - -Without this patch. the CPU will be throttled all the way down to 98MHz -if the temperature rises even a degree above the trip point, and it was -further discovered that if the internal temperature of the device is -above the first trip point temperature when it boots then it will start -in a throttled state and even -$ echo disabled > /sys/class/thermal/thermal_zone0/mode -will have no effect. - -The patch increases the passive trip point and active cooling map. The -throttling temperature will then be at 77°C and 82°C, which is still a -low enough temperature for ARM devices to not be in the real danger -zone, and gives some operational headroom. - -Signed-off-by: Bruno Umuarama ---- - arch/arm/boot/dts/mt7623.dtsi | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/mt7623.dtsi -+++ b/arch/arm/boot/dts/mt7623.dtsi -@@ -160,13 +160,13 @@ - - trips { - cpu_passive: cpu-passive { -- temperature = <57000>; -+ temperature = <77000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu_active: cpu-active { -- temperature = <67000>; -+ temperature = <82000>; - hysteresis = <2000>; - type = "active"; - }; diff --git a/target/linux/mediatek/patches-6.1/194-dts-mt7968a-add-ramoops.patch b/target/linux/mediatek/patches-6.1/194-dts-mt7968a-add-ramoops.patch deleted file mode 100644 index 161c1e75168..00000000000 --- a/target/linux/mediatek/patches-6.1/194-dts-mt7968a-add-ramoops.patch +++ /dev/null @@ -1,17 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -@@ -68,6 +68,14 @@ - #address-cells = <2>; - #size-cells = <2>; - ranges; -+ -+ /* 64 KiB reserved for ramoops/pstore */ -+ ramoops@42ff0000 { -+ compatible = "ramoops"; -+ reg = <0 0x42ff0000 0 0x10000>; -+ record-size = <0x1000>; -+ }; -+ - /* 192 KiB reserved for ARM Trusted Firmware (BL31) */ - secmon_reserved: secmon@43000000 { - reg = <0 0x43000000 0 0x30000>; diff --git a/target/linux/mediatek/patches-6.1/195-dts-mt7986a-bpi-r3-leds-port-names-and-wifi-eeprom.patch b/target/linux/mediatek/patches-6.1/195-dts-mt7986a-bpi-r3-leds-port-names-and-wifi-eeprom.patch deleted file mode 100644 index 336920bafea..00000000000 --- a/target/linux/mediatek/patches-6.1/195-dts-mt7986a-bpi-r3-leds-port-names-and-wifi-eeprom.patch +++ /dev/null @@ -1,196 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts -@@ -23,6 +23,10 @@ - serial0 = &uart0; - ethernet0 = &gmac0; - ethernet1 = &gmac1; -+ led-boot = &green_led; -+ led-failsafe = &green_led; -+ led-running = &green_led; -+ led-upgrade = &blue_led; - }; - - chosen { -@@ -419,27 +423,27 @@ - - port@1 { - reg = <1>; -- label = "lan0"; -+ label = "lan1"; - }; - - port@2 { - reg = <2>; -- label = "lan1"; -+ label = "lan2"; - }; - - port@3 { - reg = <3>; -- label = "lan2"; -+ label = "lan3"; - }; - - port@4 { - reg = <4>; -- label = "lan3"; -+ label = "lan4"; - }; - - port5: port@5 { - reg = <5>; -- label = "lan4"; -+ label = "sfp2"; - phy-mode = "2500base-x"; - sfp = <&sfp2>; - managed = "in-band-status"; -@@ -490,9 +494,137 @@ - - &wifi { - status = "okay"; -- pinctrl-names = "default", "dbdc"; -+ pinctrl-names = "default"; - pinctrl-0 = <&wf_2g_5g_pins>, <&wf_led_pins>; -- pinctrl-1 = <&wf_dbdc_pins>, <&wf_led_pins>; -+ -+ mediatek,eeprom-data = <0x86790900 0x000c4326 0x60000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x01000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000800 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x24649090 0x00280000 0x05100000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00021e00 0x021e0002 0x1e00021e 0x00022800 0x02280002 0x28000228 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00008080 0x8080fdf7 -+ 0x0903150d 0x80808080 0x80808080 0x05050d0d 0x1313c6c6 0xc3c3c200 0x00c200c2 0x00008182 -+ 0x8585c2c2 0x82828282 0x858500c2 0xc2000081 0x82858587 0x87c2c200 0x81818285 0x858787c2 -+ 0xc2000081 0x82858587 0x87c2c200 0x00818285 0x858787c2 0xc2000081 0x82858587 0x87c4c4c2 -+ 0xc100c300 0xc3c3c100 0x818383c3 0xc3c3c100 0x81838300 0xc2c2c2c0 0x81828484 0x000000c3 -+ 0xc3c3c100 0x81838386 0x86c3c3c3 0xc1008183 0x838686c2 0xc2c2c081 0x82848486 0x86c3c3c3 -+ 0xc1008183 0x838686c3 0xc3c3c100 0x81838386 0x86c3c3c3 0xc1008183 0x83868622 0x28002228 -+ 0x00222800 0x22280000 0xdddddddd 0xdddddddd 0xddbbbbbb 0xccccccdd 0xdddddddd 0xdddddddd -+ 0xeeeeeecc 0xccccdddd 0xdddddddd 0x004a5662 0x0000004a 0x56620000 0x004a5662 0x0000004a -+ 0x56620000 0x88888888 0x33333326 0x26262626 0x26262600 0x33333326 0x26262626 0x26262600 -+ 0x33333326 0x26262626 0x26262600 0x33333326 0x26262626 0x26262600 0x00000000 0xf0f0cc00 -+ 0x00000000 0x0000aaaa 0xaabbbbbb 0xcccccccc 0xccccbbbb 0xbbbbbbbb 0xbbbbbbaa 0xaaaabbbb -+ 0xbbaaaaaa 0x999999aa 0xaaaabbbb 0xbbcccccc 0x00000000 0x0000aaaa 0xaa000000 0xbbbbbbbb -+ 0xbbbbaaaa 0xaa999999 0xaaaaaaaa 0xaaaaaaaa 0xaaaaaaaa 0xaaaaaaaa 0xaaaabbbb 0xbbbbbbbb -+ 0x00000000 0x00000000 0x00000000 0x99999999 0x9999aaaa 0xaaaaaaaa 0x999999aa 0xaaaaaaaa -+ 0xaaaaaaaa 0xaaaaaaaa 0xaaaabbbb 0xbbbbbbbb 0x00000000 0x0000eeee 0xeeffffff 0xcccccccc -+ 0xccccdddd 0xddbbbbbb 0xccccccbb 0xbbbbbbbb 0xbbbbbbbb 0xbbbbbbbb 0xbbbbcccc 0xccdddddd -+ 0x00516200 0x686e0051 0x6200686e 0x00516200 0x686e0051 0x6200686e 0x00516200 0x686e0051 -+ 0x6200686e 0x00516200 0x686e0051 0x6200686e 0x00516200 0x686e0051 0x6200686e 0x00516200 -+ 0x686e0051 0x6200686e 0x00516200 0x686e0051 0x6200686e 0x00516200 0x686e0051 0x6200686e -+ 0x00516200 0x686e0051 0x6200686e 0x00516200 0x686e0051 0x6200686e 0x00516200 0x686e0051 -+ 0x6200686e 0x00516200 0x686e0051 0x6200686e 0x00516200 0x686e0051 0x6200686e 0x00516200 -+ 0x686e0051 0x6200686e 0x00516200 0x686e0051 0x6200686e 0x00516200 0x686e0051 0x6200686e -+ 0x88888888 0x88888888 0x88888888 0x88888888 0x88888888 0x88888888 0x88888888 0x88888888 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000001 0x06000100 0x01050002 0x00ff0300 -+ 0xf900fe03 0x00000000 0x00000000 0x0000009b 0x6e370000 0x00000000 0x00fc0009 0x0a00fe00 -+ 0x060700fe 0x00070800 0x05000b0a 0x00000000 0x00000000 0x000000e2 0x96460000 0x00000000 -+ 0x000400f7 0xf8000300 0xfcfe0003 0x00fbfc00 0xee00e3f2 0x00000000 0x00000000 0x00000011 -+ 0xbb550000 0x00000000 0x000600f6 0xfc000300 0xfbfe0004 0x00fafe00 0xf600ecf2 0x00000000 -+ 0x00000000 0x0000001f 0xbf580000 0x00000000 0x000600f5 0xf6000400 0xf8f90004 0x00f7f800 -+ 0xf700f0f4 0x00000000 0x00000000 0x00000024 0xbe570000 0x00000000 0x000800f8 0xfe000600 -+ 0xf8fd0007 0x00f9fe00 0xf500f0f4 0x00000000 0x00000000 0x0000002d 0xd6610000 0x00000000 -+ 0x000400f7 0xfc000500 0xf7fc0005 0x00f7fc00 0xf900f5f8 0x00000000 0x00000000 0x00000026 -+ 0xd96e0000 0x00000000 0x000400f7 0xf9000600 0xf5f70005 0x00f5f800 0xf900f4f7 0x00000000 -+ 0x00000000 0x0000001b 0xce690000 0x00000000 0x000300f8 0xf8000600 0xf6f60004 0x00f6f700 -+ 0xf900f4f7 0x00000000 0x00000000 0x00000018 0xd8720000 0x00000000 0x00000000 0x02404002 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0xc1c2c1c2 0x41c341c3 0x3fc13fc1 0x40c13fc2 0x3fc240c1 0x41c040c0 0x3fc23fc2 0x40c13fc2 -+ 0x3fc140c0 0x41c040c0 0x3fc33fc3 0x40c23fc2 0x3fc240c1 0x41c040c0 0x3fc23fc2 0x40c23fc2 -+ 0x3fc140c1 0x41c040c0 0x00000000 0x00000000 0x41c741c7 0xc1c7c1c7 0x00000000 0x00000000 -+ 0x3fc03fc0 0x3fc03fc0 0x3fc03fc0 0x3fc03fc0 0x3fc03fc0 0x3fc03fc0 0x3fc03fc0 0x3fc03fc0 -+ 0x3fc03fc0 0x3fc03fc0 0x3fc03fc0 0x3fc03fc0 0x3fc03fc0 0x3fc03fc0 0x3fc03fc0 0x3fc03fc0 -+ 0x00a0ce00 0x00000000 0xb6840000 0x00000000 0x00000000 0x00000000 0x18181818 0x18181818 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x004b5763 0x0000004b 0x57630000 0x004b5763 0x0000004b 0x57630000 0x88888888 0x08474759 -+ 0x69780849 0x49596d7a 0x0849495a 0x6d790848 0x48596c78 0x08484858 0x6a780848 0x48586a78 -+ 0x08484858 0x6c78084a 0x4a5b6d79 0x08474759 0x697a0848 0x48596b79 0x08484859 0x6c7a0848 -+ 0x48586c79 0x08484857 0x68770848 0x48576877 0x08484857 0x6a77084a 0x4a5a6a77 0x08464659 -+ 0x69790848 0x48586b79 0x08484858 0x6c7a0848 0x48596c79 0x08484857 0x68770848 0x48576877 -+ 0x08494958 0x6d7a084b 0x4b5c6c77 0x0847475a 0x6a7b0849 0x495a6e7c 0x0849495a 0x6e7c0849 -+ 0x495b6e7c 0x08494959 0x6a7a0849 0x49596a7a 0x084a4a5a 0x6f7d084b 0x4b5c6e7b 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x85848484 -+ 0xc3c4c4c5 0xc4c3c33f 0xc3c3c2c2 0xc2c2c03f 0xc3c3c3c4 0xc4c4c33f 0xc2c2c2c2 0xc1c3c1c1 -+ 0xc0c08282 0x83848686 0x88880000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00001111 0x00000000 -+ 0x8080f703 0x10808080 0x80050d13 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x000000a4 0xce000000 0x0000b684 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 -+ 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000>; - - led { - led-active-low; ---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso -@@ -55,6 +55,7 @@ - partition@c00000 { - label = "fit"; - reg = <0xc00000 0x1400000>; -+ compatible = "denx,fit"; - }; - }; - }; diff --git a/target/linux/mediatek/patches-6.1/196-dts-mt7986a-bpi-r3-use-all-ubi-nand-layout.patch b/target/linux/mediatek/patches-6.1/196-dts-mt7986a-bpi-r3-use-all-ubi-nand-layout.patch deleted file mode 100644 index 38510c0fc79..00000000000 --- a/target/linux/mediatek/patches-6.1/196-dts-mt7986a-bpi-r3-use-all-ubi-nand-layout.patch +++ /dev/null @@ -1,131 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso -@@ -23,7 +23,27 @@ - no-sd; - no-sdio; - status = "okay"; -+ -+ card@0 { -+ compatible = "mmc-card"; -+ reg = <0>; -+ -+ block { -+ compatible = "block-device"; -+ partitions { -+ emmc_rootdisk: block-partition-production { -+ partname = "production"; -+ }; -+ }; -+ }; -+ }; - }; - }; --}; - -+ fragment@1 { -+ target-path = "/chosen"; -+ __overlay__ { -+ rootdisk-emmc = <&emmc_rootdisk>; -+ }; -+ }; -+}; ---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso -@@ -29,27 +29,30 @@ - - partition@0 { - label = "bl2"; -- reg = <0x0 0x100000>; -+ reg = <0x0 0x200000>; - read-only; - }; - -- partition@100000 { -- label = "reserved"; -- reg = <0x100000 0x280000>; -- }; -- -- partition@380000 { -- label = "fip"; -- reg = <0x380000 0x200000>; -- read-only; -- }; -- -- partition@580000 { -+ partition@200000 { - label = "ubi"; -- reg = <0x580000 0x7a80000>; -+ reg = <0x200000 0x7e00000>; -+ compatible = "linux,ubi"; -+ -+ volumes { -+ nand_rootdisk: ubi-volume-fit { -+ volname = "fit"; -+ }; -+ }; - }; - }; - }; - }; - }; -+ -+ fragment@1 { -+ target-path = "/chosen"; -+ __overlay__ { -+ rootdisk-spim-nand = <&nand_rootdisk>; -+ }; -+ }; - }; ---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso -@@ -52,7 +52,7 @@ - reg = <0x180000 0xa80000>; - }; - -- partition@c00000 { -+ nor_rootdisk: partition@c00000 { - label = "fit"; - reg = <0xc00000 0x1400000>; - compatible = "denx,fit"; -@@ -61,4 +61,11 @@ - }; - }; - }; -+ -+ fragment@1 { -+ target-path = "/chosen"; -+ __overlay__ { -+ rootdisk-nor = <&nor_rootdisk>; -+ }; -+ }; - }; ---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso -@@ -17,6 +17,27 @@ - max-frequency = <52000000>; - cap-sd-highspeed; - status = "okay"; -+ -+ card@0 { -+ compatible = "mmc-card"; -+ reg = <0>; -+ -+ block { -+ compatible = "block-device"; -+ partitions { -+ sd_rootdisk: block-partition-production { -+ partname = "production"; -+ }; -+ }; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target-path = "/chosen"; -+ __overlay__ { -+ rootdisk-sd = <&sd_rootdisk>; - }; - }; - }; diff --git a/target/linux/mediatek/patches-6.1/200-phy-phy-mtk-tphy-Add-hifsys-support.patch b/target/linux/mediatek/patches-6.1/200-phy-phy-mtk-tphy-Add-hifsys-support.patch deleted file mode 100644 index 6347533aa8f..00000000000 --- a/target/linux/mediatek/patches-6.1/200-phy-phy-mtk-tphy-Add-hifsys-support.patch +++ /dev/null @@ -1,66 +0,0 @@ -From 28f9a5e2a3f5441ab5594669ed82da11e32277a9 Mon Sep 17 00:00:00 2001 -From: Kristian Evensen -Date: Mon, 30 Apr 2018 14:38:01 +0200 -Subject: [PATCH] phy: phy-mtk-tphy: Add hifsys-support - ---- - drivers/phy/mediatek/phy-mtk-tphy.c | 20 ++++++++++++++++++++ - 1 file changed, 20 insertions(+) - ---- a/drivers/phy/mediatek/phy-mtk-tphy.c -+++ b/drivers/phy/mediatek/phy-mtk-tphy.c -@@ -17,6 +17,8 @@ - #include - #include - #include -+#include -+#include - - #include "phy-mtk-io.h" - -@@ -264,6 +266,9 @@ - - #define TPHY_CLKS_CNT 2 - -+#define HIF_SYSCFG1 0x14 -+#define HIF_SYSCFG1_PHY2_MASK (0x3 << 20) -+ - enum mtk_phy_version { - MTK_PHY_V1 = 1, - MTK_PHY_V2, -@@ -331,6 +336,7 @@ struct mtk_tphy { - void __iomem *sif_base; /* only shared sif */ - const struct mtk_phy_pdata *pdata; - struct mtk_phy_instance **phys; -+ struct regmap *hif; - int nphys; - int src_ref_clk; /* MHZ, reference clock for slew rate calibrate */ - int src_coef; /* coefficient for slew rate calibrate */ -@@ -596,6 +602,10 @@ static void pcie_phy_instance_init(struc - if (tphy->pdata->version != MTK_PHY_V1) - return; - -+ if (tphy->hif) -+ regmap_update_bits(tphy->hif, HIF_SYSCFG1, -+ HIF_SYSCFG1_PHY2_MASK, 0); -+ - mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG0, - P3A_RG_XTAL_EXT_PE1H | P3A_RG_XTAL_EXT_PE2H, - FIELD_PREP(P3A_RG_XTAL_EXT_PE1H, 0x2) | -@@ -1241,6 +1251,16 @@ static int mtk_tphy_probe(struct platfor - &tphy->src_coef); - } - -+ if (of_find_property(np, "mediatek,phy-switch", NULL)) { -+ tphy->hif = syscon_regmap_lookup_by_phandle(np, -+ "mediatek,phy-switch"); -+ if (IS_ERR(tphy->hif)) { -+ dev_err(&pdev->dev, -+ "missing \"mediatek,phy-switch\" phandle\n"); -+ return PTR_ERR(tphy->hif); -+ } -+ } -+ - port = 0; - for_each_child_of_node(np, child_np) { - struct mtk_phy_instance *instance; diff --git a/target/linux/mediatek/patches-6.1/210-v6.2-pinctrl-mt7986-allow-configuring-uart-rx-tx-and-rts-.patch b/target/linux/mediatek/patches-6.1/210-v6.2-pinctrl-mt7986-allow-configuring-uart-rx-tx-and-rts-.patch deleted file mode 100644 index 3e16a533e1b..00000000000 --- a/target/linux/mediatek/patches-6.1/210-v6.2-pinctrl-mt7986-allow-configuring-uart-rx-tx-and-rts-.patch +++ /dev/null @@ -1,88 +0,0 @@ -From f76e8bc416bebb0f7b9f57b1247eae945421c0b9 Mon Sep 17 00:00:00 2001 -From: Sam Shih -Date: Sat, 8 Oct 2022 18:48:06 +0200 -Subject: [PATCH 1/2] pinctrl: mt7986: allow configuring uart rx/tx and rts/cts - separately - -Some mt7986 boards use uart rts/cts pins as gpio, -This patch allows to change rts/cts to gpio mode, but keep -rx/tx as UART function. - -Signed-off-by: Frank Wunderlich -Signed-off-by: Sam Shih -Link: https://lore.kernel.org/r/20221008164807.113590-1-linux@fw-web.de -Signed-off-by: Linus Walleij ---- - drivers/pinctrl/mediatek/pinctrl-mt7986.c | 32 ++++++++++++++++++----- - 1 file changed, 25 insertions(+), 7 deletions(-) - ---- a/drivers/pinctrl/mediatek/pinctrl-mt7986.c -+++ b/drivers/pinctrl/mediatek/pinctrl-mt7986.c -@@ -675,11 +675,17 @@ static int mt7986_uart1_1_funcs[] = { 4, - static int mt7986_spi1_2_pins[] = { 29, 30, 31, 32, }; - static int mt7986_spi1_2_funcs[] = { 1, 1, 1, 1, }; - --static int mt7986_uart1_2_pins[] = { 29, 30, 31, 32, }; --static int mt7986_uart1_2_funcs[] = { 3, 3, 3, 3, }; -+static int mt7986_uart1_2_rx_tx_pins[] = { 29, 30, }; -+static int mt7986_uart1_2_rx_tx_funcs[] = { 3, 3, }; - --static int mt7986_uart2_0_pins[] = { 29, 30, 31, 32, }; --static int mt7986_uart2_0_funcs[] = { 4, 4, 4, 4, }; -+static int mt7986_uart1_2_cts_rts_pins[] = { 31, 32, }; -+static int mt7986_uart1_2_cts_rts_funcs[] = { 3, 3, }; -+ -+static int mt7986_uart2_0_rx_tx_pins[] = { 29, 30, }; -+static int mt7986_uart2_0_rx_tx_funcs[] = { 4, 4, }; -+ -+static int mt7986_uart2_0_cts_rts_pins[] = { 31, 32, }; -+static int mt7986_uart2_0_cts_rts_funcs[] = { 4, 4, }; - - static int mt7986_spi0_pins[] = { 33, 34, 35, 36, }; - static int mt7986_spi0_funcs[] = { 1, 1, 1, 1, }; -@@ -708,6 +714,12 @@ static int mt7986_pcie_reset_funcs[] = { - static int mt7986_uart1_pins[] = { 42, 43, 44, 45, }; - static int mt7986_uart1_funcs[] = { 1, 1, 1, 1, }; - -+static int mt7986_uart1_rx_tx_pins[] = { 42, 43, }; -+static int mt7986_uart1_rx_tx_funcs[] = { 1, 1, }; -+ -+static int mt7986_uart1_cts_rts_pins[] = { 44, 45, }; -+static int mt7986_uart1_cts_rts_funcs[] = { 1, 1, }; -+ - static int mt7986_uart2_pins[] = { 46, 47, 48, 49, }; - static int mt7986_uart2_funcs[] = { 1, 1, 1, 1, }; - -@@ -749,6 +761,8 @@ static const struct group_desc mt7986_gr - PINCTRL_PIN_GROUP("wifi_led", mt7986_wifi_led), - PINCTRL_PIN_GROUP("i2c", mt7986_i2c), - PINCTRL_PIN_GROUP("uart1_0", mt7986_uart1_0), -+ PINCTRL_PIN_GROUP("uart1_rx_tx", mt7986_uart1_rx_tx), -+ PINCTRL_PIN_GROUP("uart1_cts_rts", mt7986_uart1_cts_rts), - PINCTRL_PIN_GROUP("pcie_clk", mt7986_pcie_clk), - PINCTRL_PIN_GROUP("pcie_wake", mt7986_pcie_wake), - PINCTRL_PIN_GROUP("spi1_0", mt7986_spi1_0), -@@ -760,8 +774,10 @@ static const struct group_desc mt7986_gr - PINCTRL_PIN_GROUP("spi1_1", mt7986_spi1_1), - PINCTRL_PIN_GROUP("uart1_1", mt7986_uart1_1), - PINCTRL_PIN_GROUP("spi1_2", mt7986_spi1_2), -- PINCTRL_PIN_GROUP("uart1_2", mt7986_uart1_2), -- PINCTRL_PIN_GROUP("uart2_0", mt7986_uart2_0), -+ PINCTRL_PIN_GROUP("uart1_2_rx_tx", mt7986_uart1_2_rx_tx), -+ PINCTRL_PIN_GROUP("uart1_2_cts_rts", mt7986_uart1_2_cts_rts), -+ PINCTRL_PIN_GROUP("uart2_0_rx_tx", mt7986_uart2_0_rx_tx), -+ PINCTRL_PIN_GROUP("uart2_0_cts_rts", mt7986_uart2_0_cts_rts), - PINCTRL_PIN_GROUP("spi0", mt7986_spi0), - PINCTRL_PIN_GROUP("spi0_wp_hold", mt7986_spi0_wp_hold), - PINCTRL_PIN_GROUP("uart2_1", mt7986_uart2_1), -@@ -800,7 +816,9 @@ static const char *mt7986_pwm_groups[] = - static const char *mt7986_spi_groups[] = { - "spi0", "spi0_wp_hold", "spi1_0", "spi1_1", "spi1_2", "spi1_3", }; - static const char *mt7986_uart_groups[] = { -- "uart1_0", "uart1_1", "uart1_2", "uart1_3_rx_tx", "uart1_3_cts_rts", -+ "uart1_0", "uart1_1", "uart1_rx_tx", "uart1_cts_rts", -+ "uart1_2_rx_tx", "uart1_2_cts_rts", -+ "uart1_3_rx_tx", "uart1_3_cts_rts", "uart2_0_rx_tx", "uart2_0_cts_rts", - "uart2_0", "uart2_1", "uart0", "uart1", "uart2", - }; - static const char *mt7986_wdt_groups[] = { "watchdog", }; diff --git a/target/linux/mediatek/patches-6.1/211-v6.2-pinctrl-mediatek-add-pull_type-attribute-for-mediate.patch b/target/linux/mediatek/patches-6.1/211-v6.2-pinctrl-mediatek-add-pull_type-attribute-for-mediate.patch deleted file mode 100644 index 47ded1aeb5f..00000000000 --- a/target/linux/mediatek/patches-6.1/211-v6.2-pinctrl-mediatek-add-pull_type-attribute-for-mediate.patch +++ /dev/null @@ -1,100 +0,0 @@ -From 822d774abbcc66b811e28c68b59b40b964ba5b46 Mon Sep 17 00:00:00 2001 -From: Sam Shih -Date: Sun, 6 Nov 2022 09:01:13 +0100 -Subject: [PATCH 2/2] pinctrl: mediatek: add pull_type attribute for mediatek - MT7986 SoC - -Commit fb34a9ae383a ("pinctrl: mediatek: support rsel feature") -add SoC specify 'pull_type' attribute for bias configuration. - -This patch add pull_type attribute to pinctrl-mt7986.c, and make -bias_set_combo and bias_get_combo available to mediatek MT7986 SoC. - -Signed-off-by: Sam Shih -Signed-off-by: Frank Wunderlich -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20221106080114.7426-7-linux@fw-web.de -Signed-off-by: Linus Walleij ---- - drivers/pinctrl/mediatek/pinctrl-mt7986.c | 56 +++++++++++++++++++++++ - 1 file changed, 56 insertions(+) - ---- a/drivers/pinctrl/mediatek/pinctrl-mt7986.c -+++ b/drivers/pinctrl/mediatek/pinctrl-mt7986.c -@@ -407,6 +407,60 @@ static const struct mtk_pin_field_calc m - PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x60, 0x10, 2, 1), - }; - -+static const unsigned int mt7986_pull_type[] = { -+ MTK_PULL_PUPD_R1R0_TYPE,/*0*/ MTK_PULL_PUPD_R1R0_TYPE,/*1*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*2*/ MTK_PULL_PUPD_R1R0_TYPE,/*3*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*4*/ MTK_PULL_PUPD_R1R0_TYPE,/*5*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*6*/ MTK_PULL_PUPD_R1R0_TYPE,/*7*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*8*/ MTK_PULL_PUPD_R1R0_TYPE,/*9*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*10*/ MTK_PULL_PUPD_R1R0_TYPE,/*11*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*12*/ MTK_PULL_PUPD_R1R0_TYPE,/*13*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*14*/ MTK_PULL_PUPD_R1R0_TYPE,/*15*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*16*/ MTK_PULL_PUPD_R1R0_TYPE,/*17*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*18*/ MTK_PULL_PUPD_R1R0_TYPE,/*19*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*20*/ MTK_PULL_PUPD_R1R0_TYPE,/*21*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*22*/ MTK_PULL_PUPD_R1R0_TYPE,/*23*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*24*/ MTK_PULL_PUPD_R1R0_TYPE,/*25*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*26*/ MTK_PULL_PUPD_R1R0_TYPE,/*27*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*28*/ MTK_PULL_PUPD_R1R0_TYPE,/*29*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*30*/ MTK_PULL_PUPD_R1R0_TYPE,/*31*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*32*/ MTK_PULL_PUPD_R1R0_TYPE,/*33*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*34*/ MTK_PULL_PUPD_R1R0_TYPE,/*35*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*36*/ MTK_PULL_PUPD_R1R0_TYPE,/*37*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*38*/ MTK_PULL_PUPD_R1R0_TYPE,/*39*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*40*/ MTK_PULL_PUPD_R1R0_TYPE,/*41*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*42*/ MTK_PULL_PUPD_R1R0_TYPE,/*43*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*44*/ MTK_PULL_PUPD_R1R0_TYPE,/*45*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*46*/ MTK_PULL_PUPD_R1R0_TYPE,/*47*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*48*/ MTK_PULL_PUPD_R1R0_TYPE,/*49*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*50*/ MTK_PULL_PUPD_R1R0_TYPE,/*51*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*52*/ MTK_PULL_PUPD_R1R0_TYPE,/*53*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*54*/ MTK_PULL_PUPD_R1R0_TYPE,/*55*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*56*/ MTK_PULL_PUPD_R1R0_TYPE,/*57*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*58*/ MTK_PULL_PUPD_R1R0_TYPE,/*59*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*60*/ MTK_PULL_PUPD_R1R0_TYPE,/*61*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*62*/ MTK_PULL_PUPD_R1R0_TYPE,/*63*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*64*/ MTK_PULL_PUPD_R1R0_TYPE,/*65*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*66*/ MTK_PULL_PUPD_R1R0_TYPE,/*67*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*68*/ MTK_PULL_PU_PD_TYPE,/*69*/ -+ MTK_PULL_PU_PD_TYPE,/*70*/ MTK_PULL_PU_PD_TYPE,/*71*/ -+ MTK_PULL_PU_PD_TYPE,/*72*/ MTK_PULL_PU_PD_TYPE,/*73*/ -+ MTK_PULL_PU_PD_TYPE,/*74*/ MTK_PULL_PU_PD_TYPE,/*75*/ -+ MTK_PULL_PU_PD_TYPE,/*76*/ MTK_PULL_PU_PD_TYPE,/*77*/ -+ MTK_PULL_PU_PD_TYPE,/*78*/ MTK_PULL_PU_PD_TYPE,/*79*/ -+ MTK_PULL_PU_PD_TYPE,/*80*/ MTK_PULL_PU_PD_TYPE,/*81*/ -+ MTK_PULL_PU_PD_TYPE,/*82*/ MTK_PULL_PU_PD_TYPE,/*83*/ -+ MTK_PULL_PU_PD_TYPE,/*84*/ MTK_PULL_PU_PD_TYPE,/*85*/ -+ MTK_PULL_PU_PD_TYPE,/*86*/ MTK_PULL_PU_PD_TYPE,/*87*/ -+ MTK_PULL_PU_PD_TYPE,/*88*/ MTK_PULL_PU_PD_TYPE,/*89*/ -+ MTK_PULL_PU_PD_TYPE,/*90*/ MTK_PULL_PU_PD_TYPE,/*91*/ -+ MTK_PULL_PU_PD_TYPE,/*92*/ MTK_PULL_PU_PD_TYPE,/*93*/ -+ MTK_PULL_PU_PD_TYPE,/*94*/ MTK_PULL_PU_PD_TYPE,/*95*/ -+ MTK_PULL_PU_PD_TYPE,/*96*/ MTK_PULL_PU_PD_TYPE,/*97*/ -+ MTK_PULL_PU_PD_TYPE,/*98*/ MTK_PULL_PU_PD_TYPE,/*99*/ -+ MTK_PULL_PU_PD_TYPE,/*100*/ -+}; -+ - static const struct mtk_pin_reg_calc mt7986_reg_cals[] = { - [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt7986_pin_mode_range), - [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt7986_pin_dir_range), -@@ -868,6 +922,7 @@ static struct mtk_pin_soc mt7986a_data = - .ies_present = false, - .base_names = mt7986_pinctrl_register_base_names, - .nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names), -+ .pull_type = mt7986_pull_type, - .bias_set_combo = mtk_pinconf_bias_set_combo, - .bias_get_combo = mtk_pinconf_bias_get_combo, - .drive_set = mtk_pinconf_drive_set_rev1, -@@ -889,6 +944,7 @@ static struct mtk_pin_soc mt7986b_data = - .ies_present = false, - .base_names = mt7986_pinctrl_register_base_names, - .nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names), -+ .pull_type = mt7986_pull_type, - .bias_set_combo = mtk_pinconf_bias_set_combo, - .bias_get_combo = mtk_pinconf_bias_get_combo, - .drive_set = mtk_pinconf_drive_set_rev1, diff --git a/target/linux/mediatek/patches-6.1/215-v6.3-pinctrl-add-mt7981-pinctrl-driver.patch b/target/linux/mediatek/patches-6.1/215-v6.3-pinctrl-add-mt7981-pinctrl-driver.patch deleted file mode 100644 index 46dfa24b7b7..00000000000 --- a/target/linux/mediatek/patches-6.1/215-v6.3-pinctrl-add-mt7981-pinctrl-driver.patch +++ /dev/null @@ -1,1094 +0,0 @@ -From 6c83b2d94fcca735cf7d8aa7a55a4957eb404a9d Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Thu, 26 Jan 2023 00:34:56 +0000 -Subject: [PATCH] pinctrl: add mt7981 pinctrl driver - -Add pinctrl driver for the MediaTek MT7981 SoC, based on the driver -which can also be found the SDK. - -Signed-off-by: Daniel Golle -Reviewed-by: Rob Herring -Link: https://lore.kernel.org/r/ef5112946d16cacc67e65e439ba7b52a9950c1bb.1674693008.git.daniel@makrotopia.org -Signed-off-by: Linus Walleij ---- - drivers/pinctrl/mediatek/Kconfig | 5 + - drivers/pinctrl/mediatek/Makefile | 1 + - drivers/pinctrl/mediatek/pinctrl-mt7981.c | 1048 +++++++++++++++++++++ - 3 files changed, 1054 insertions(+) - create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt7981.c - ---- a/drivers/pinctrl/mediatek/Kconfig -+++ b/drivers/pinctrl/mediatek/Kconfig -@@ -127,6 +127,11 @@ config PINCTRL_MT7622 - default ARM64 && ARCH_MEDIATEK - select PINCTRL_MTK_MOORE - -+config PINCTRL_MT7981 -+ bool "Mediatek MT7981 pin control" -+ depends on OF -+ select PINCTRL_MTK_MOORE -+ - config PINCTRL_MT7986 - bool "Mediatek MT7986 pin control" - depends on OF ---- a/drivers/pinctrl/mediatek/Makefile -+++ b/drivers/pinctrl/mediatek/Makefile -@@ -18,6 +18,7 @@ obj-$(CONFIG_PINCTRL_MT6797) += pinctrl- - obj-$(CONFIG_PINCTRL_MT7622) += pinctrl-mt7622.o - obj-$(CONFIG_PINCTRL_MT7623) += pinctrl-mt7623.o - obj-$(CONFIG_PINCTRL_MT7629) += pinctrl-mt7629.o -+obj-$(CONFIG_PINCTRL_MT7981) += pinctrl-mt7981.o - obj-$(CONFIG_PINCTRL_MT7986) += pinctrl-mt7986.o - obj-$(CONFIG_PINCTRL_MT8167) += pinctrl-mt8167.o - obj-$(CONFIG_PINCTRL_MT8173) += pinctrl-mt8173.o ---- /dev/null -+++ b/drivers/pinctrl/mediatek/pinctrl-mt7981.c -@@ -0,0 +1,1048 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * The MT7981 driver based on Linux generic pinctrl binding. -+ * -+ * Copyright (C) 2020 MediaTek Inc. -+ * Author: Sam Shih -+ */ -+ -+#include "pinctrl-moore.h" -+ -+#define MT7981_PIN(_number, _name) \ -+ MTK_PIN(_number, _name, 0, _number, DRV_GRP4) -+ -+#define PIN_FIELD_BASE(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, _x_bits) \ -+ PIN_FIELD_CALC(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, \ -+ _x_bits, 32, 0) -+ -+#define PINS_FIELD_BASE(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, _x_bits) \ -+ PIN_FIELD_CALC(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, \ -+ _x_bits, 32, 1) -+ -+static const struct mtk_pin_field_calc mt7981_pin_mode_range[] = { -+ PIN_FIELD(0, 56, 0x300, 0x10, 0, 4), -+}; -+ -+static const struct mtk_pin_field_calc mt7981_pin_dir_range[] = { -+ PIN_FIELD(0, 56, 0x0, 0x10, 0, 1), -+}; -+ -+static const struct mtk_pin_field_calc mt7981_pin_di_range[] = { -+ PIN_FIELD(0, 56, 0x200, 0x10, 0, 1), -+}; -+ -+static const struct mtk_pin_field_calc mt7981_pin_do_range[] = { -+ PIN_FIELD(0, 56, 0x100, 0x10, 0, 1), -+}; -+ -+static const struct mtk_pin_field_calc mt7981_pin_ies_range[] = { -+ PIN_FIELD_BASE(0, 0, 1, 0x10, 0x10, 1, 1), -+ PIN_FIELD_BASE(1, 1, 1, 0x10, 0x10, 0, 1), -+ PIN_FIELD_BASE(2, 2, 5, 0x20, 0x10, 6, 1), -+ PIN_FIELD_BASE(3, 3, 4, 0x20, 0x10, 6, 1), -+ PIN_FIELD_BASE(4, 4, 4, 0x20, 0x10, 2, 1), -+ PIN_FIELD_BASE(5, 5, 4, 0x20, 0x10, 1, 1), -+ PIN_FIELD_BASE(6, 6, 4, 0x20, 0x10, 3, 1), -+ PIN_FIELD_BASE(7, 7, 4, 0x20, 0x10, 0, 1), -+ PIN_FIELD_BASE(8, 8, 4, 0x20, 0x10, 4, 1), -+ -+ PIN_FIELD_BASE(9, 9, 5, 0x20, 0x10, 9, 1), -+ PIN_FIELD_BASE(10, 10, 5, 0x20, 0x10, 8, 1), -+ PIN_FIELD_BASE(11, 11, 5, 0x40, 0x10, 10, 1), -+ PIN_FIELD_BASE(12, 12, 5, 0x20, 0x10, 7, 1), -+ PIN_FIELD_BASE(13, 13, 5, 0x20, 0x10, 11, 1), -+ -+ PIN_FIELD_BASE(14, 14, 4, 0x20, 0x10, 8, 1), -+ -+ PIN_FIELD_BASE(15, 15, 2, 0x20, 0x10, 0, 1), -+ PIN_FIELD_BASE(16, 16, 2, 0x20, 0x10, 1, 1), -+ PIN_FIELD_BASE(17, 17, 2, 0x20, 0x10, 5, 1), -+ PIN_FIELD_BASE(18, 18, 2, 0x20, 0x10, 4, 1), -+ PIN_FIELD_BASE(19, 19, 2, 0x20, 0x10, 2, 1), -+ PIN_FIELD_BASE(20, 20, 2, 0x20, 0x10, 3, 1), -+ PIN_FIELD_BASE(21, 21, 2, 0x20, 0x10, 6, 1), -+ PIN_FIELD_BASE(22, 22, 2, 0x20, 0x10, 7, 1), -+ PIN_FIELD_BASE(23, 23, 2, 0x20, 0x10, 10, 1), -+ PIN_FIELD_BASE(24, 24, 2, 0x20, 0x10, 9, 1), -+ PIN_FIELD_BASE(25, 25, 2, 0x20, 0x10, 8, 1), -+ -+ PIN_FIELD_BASE(26, 26, 5, 0x20, 0x10, 0, 1), -+ PIN_FIELD_BASE(27, 27, 5, 0x20, 0x10, 4, 1), -+ PIN_FIELD_BASE(28, 28, 5, 0x20, 0x10, 3, 1), -+ PIN_FIELD_BASE(29, 29, 5, 0x20, 0x10, 1, 1), -+ PIN_FIELD_BASE(30, 30, 5, 0x20, 0x10, 2, 1), -+ PIN_FIELD_BASE(31, 31, 5, 0x20, 0x10, 5, 1), -+ -+ PIN_FIELD_BASE(32, 32, 1, 0x10, 0x10, 2, 1), -+ PIN_FIELD_BASE(33, 33, 1, 0x10, 0x10, 3, 1), -+ -+ PIN_FIELD_BASE(34, 34, 4, 0x20, 0x10, 5, 1), -+ PIN_FIELD_BASE(35, 35, 4, 0x20, 0x10, 7, 1), -+ -+ PIN_FIELD_BASE(36, 36, 3, 0x10, 0x10, 2, 1), -+ PIN_FIELD_BASE(37, 37, 3, 0x10, 0x10, 3, 1), -+ PIN_FIELD_BASE(38, 38, 3, 0x10, 0x10, 0, 1), -+ PIN_FIELD_BASE(39, 39, 3, 0x10, 0x10, 1, 1), -+ -+ PIN_FIELD_BASE(40, 40, 7, 0x30, 0x10, 1, 1), -+ PIN_FIELD_BASE(41, 41, 7, 0x30, 0x10, 0, 1), -+ PIN_FIELD_BASE(42, 42, 7, 0x30, 0x10, 9, 1), -+ PIN_FIELD_BASE(43, 43, 7, 0x30, 0x10, 7, 1), -+ PIN_FIELD_BASE(44, 44, 7, 0x30, 0x10, 8, 1), -+ PIN_FIELD_BASE(45, 45, 7, 0x30, 0x10, 3, 1), -+ PIN_FIELD_BASE(46, 46, 7, 0x30, 0x10, 4, 1), -+ PIN_FIELD_BASE(47, 47, 7, 0x30, 0x10, 5, 1), -+ PIN_FIELD_BASE(48, 48, 7, 0x30, 0x10, 6, 1), -+ PIN_FIELD_BASE(49, 49, 7, 0x30, 0x10, 2, 1), -+ -+ PIN_FIELD_BASE(50, 50, 6, 0x10, 0x10, 0, 1), -+ PIN_FIELD_BASE(51, 51, 6, 0x10, 0x10, 2, 1), -+ PIN_FIELD_BASE(52, 52, 6, 0x10, 0x10, 3, 1), -+ PIN_FIELD_BASE(53, 53, 6, 0x10, 0x10, 4, 1), -+ PIN_FIELD_BASE(54, 54, 6, 0x10, 0x10, 5, 1), -+ PIN_FIELD_BASE(55, 55, 6, 0x10, 0x10, 6, 1), -+ PIN_FIELD_BASE(56, 56, 6, 0x10, 0x10, 1, 1), -+}; -+ -+static const struct mtk_pin_field_calc mt7981_pin_smt_range[] = { -+ PIN_FIELD_BASE(0, 0, 1, 0x60, 0x10, 1, 1), -+ PIN_FIELD_BASE(1, 1, 1, 0x60, 0x10, 0, 1), -+ PIN_FIELD_BASE(2, 2, 5, 0x90, 0x10, 6, 1), -+ PIN_FIELD_BASE(3, 3, 4, 0x80, 0x10, 6, 1), -+ PIN_FIELD_BASE(4, 4, 4, 0x80, 0x10, 2, 1), -+ PIN_FIELD_BASE(5, 5, 4, 0x80, 0x10, 1, 1), -+ PIN_FIELD_BASE(6, 6, 4, 0x80, 0x10, 3, 1), -+ PIN_FIELD_BASE(7, 7, 4, 0x80, 0x10, 0, 1), -+ PIN_FIELD_BASE(8, 8, 4, 0x80, 0x10, 4, 1), -+ -+ PIN_FIELD_BASE(9, 9, 5, 0x90, 0x10, 9, 1), -+ PIN_FIELD_BASE(10, 10, 5, 0x90, 0x10, 8, 1), -+ PIN_FIELD_BASE(11, 11, 5, 0x90, 0x10, 10, 1), -+ PIN_FIELD_BASE(12, 12, 5, 0x90, 0x10, 7, 1), -+ PIN_FIELD_BASE(13, 13, 5, 0x90, 0x10, 11, 1), -+ -+ PIN_FIELD_BASE(14, 14, 4, 0x80, 0x10, 8, 1), -+ -+ PIN_FIELD_BASE(15, 15, 2, 0x90, 0x10, 0, 1), -+ PIN_FIELD_BASE(16, 16, 2, 0x90, 0x10, 1, 1), -+ PIN_FIELD_BASE(17, 17, 2, 0x90, 0x10, 5, 1), -+ PIN_FIELD_BASE(18, 18, 2, 0x90, 0x10, 4, 1), -+ PIN_FIELD_BASE(19, 19, 2, 0x90, 0x10, 2, 1), -+ PIN_FIELD_BASE(20, 20, 2, 0x90, 0x10, 3, 1), -+ PIN_FIELD_BASE(21, 21, 2, 0x90, 0x10, 6, 1), -+ PIN_FIELD_BASE(22, 22, 2, 0x90, 0x10, 7, 1), -+ PIN_FIELD_BASE(23, 23, 2, 0x90, 0x10, 10, 1), -+ PIN_FIELD_BASE(24, 24, 2, 0x90, 0x10, 9, 1), -+ PIN_FIELD_BASE(25, 25, 2, 0x90, 0x10, 8, 1), -+ -+ PIN_FIELD_BASE(26, 26, 5, 0x90, 0x10, 0, 1), -+ PIN_FIELD_BASE(27, 27, 5, 0x90, 0x10, 4, 1), -+ PIN_FIELD_BASE(28, 28, 5, 0x90, 0x10, 3, 1), -+ PIN_FIELD_BASE(29, 29, 5, 0x90, 0x10, 1, 1), -+ PIN_FIELD_BASE(30, 30, 5, 0x90, 0x10, 2, 1), -+ PIN_FIELD_BASE(31, 31, 5, 0x90, 0x10, 5, 1), -+ -+ PIN_FIELD_BASE(32, 32, 1, 0x60, 0x10, 2, 1), -+ PIN_FIELD_BASE(33, 33, 1, 0x60, 0x10, 3, 1), -+ -+ PIN_FIELD_BASE(34, 34, 4, 0x80, 0x10, 5, 1), -+ PIN_FIELD_BASE(35, 35, 4, 0x80, 0x10, 7, 1), -+ -+ PIN_FIELD_BASE(36, 36, 3, 0x60, 0x10, 2, 1), -+ PIN_FIELD_BASE(37, 37, 3, 0x60, 0x10, 3, 1), -+ PIN_FIELD_BASE(38, 38, 3, 0x60, 0x10, 0, 1), -+ PIN_FIELD_BASE(39, 39, 3, 0x60, 0x10, 1, 1), -+ -+ PIN_FIELD_BASE(40, 40, 7, 0x70, 0x10, 1, 1), -+ PIN_FIELD_BASE(41, 41, 7, 0x70, 0x10, 0, 1), -+ PIN_FIELD_BASE(42, 42, 7, 0x70, 0x10, 9, 1), -+ PIN_FIELD_BASE(43, 43, 7, 0x70, 0x10, 7, 1), -+ PIN_FIELD_BASE(44, 44, 7, 0x30, 0x10, 8, 1), -+ PIN_FIELD_BASE(45, 45, 7, 0x70, 0x10, 3, 1), -+ PIN_FIELD_BASE(46, 46, 7, 0x70, 0x10, 4, 1), -+ PIN_FIELD_BASE(47, 47, 7, 0x70, 0x10, 5, 1), -+ PIN_FIELD_BASE(48, 48, 7, 0x70, 0x10, 6, 1), -+ PIN_FIELD_BASE(49, 49, 7, 0x70, 0x10, 2, 1), -+ -+ PIN_FIELD_BASE(50, 50, 6, 0x50, 0x10, 0, 1), -+ PIN_FIELD_BASE(51, 51, 6, 0x50, 0x10, 2, 1), -+ PIN_FIELD_BASE(52, 52, 6, 0x50, 0x10, 3, 1), -+ PIN_FIELD_BASE(53, 53, 6, 0x50, 0x10, 4, 1), -+ PIN_FIELD_BASE(54, 54, 6, 0x50, 0x10, 5, 1), -+ PIN_FIELD_BASE(55, 55, 6, 0x50, 0x10, 6, 1), -+ PIN_FIELD_BASE(56, 56, 6, 0x50, 0x10, 1, 1), -+}; -+ -+static const struct mtk_pin_field_calc mt7981_pin_pu_range[] = { -+ PIN_FIELD_BASE(40, 40, 7, 0x50, 0x10, 1, 1), -+ PIN_FIELD_BASE(41, 41, 7, 0x50, 0x10, 0, 1), -+ PIN_FIELD_BASE(42, 42, 7, 0x50, 0x10, 9, 1), -+ PIN_FIELD_BASE(43, 43, 7, 0x50, 0x10, 7, 1), -+ PIN_FIELD_BASE(44, 44, 7, 0x50, 0x10, 8, 1), -+ PIN_FIELD_BASE(45, 45, 7, 0x50, 0x10, 3, 1), -+ PIN_FIELD_BASE(46, 46, 7, 0x50, 0x10, 4, 1), -+ PIN_FIELD_BASE(47, 47, 7, 0x50, 0x10, 5, 1), -+ PIN_FIELD_BASE(48, 48, 7, 0x50, 0x10, 6, 1), -+ PIN_FIELD_BASE(49, 49, 7, 0x50, 0x10, 2, 1), -+ -+ PIN_FIELD_BASE(50, 50, 6, 0x30, 0x10, 0, 1), -+ PIN_FIELD_BASE(51, 51, 6, 0x30, 0x10, 2, 1), -+ PIN_FIELD_BASE(52, 52, 6, 0x30, 0x10, 3, 1), -+ PIN_FIELD_BASE(53, 53, 6, 0x30, 0x10, 4, 1), -+ PIN_FIELD_BASE(54, 54, 6, 0x30, 0x10, 5, 1), -+ PIN_FIELD_BASE(55, 55, 6, 0x30, 0x10, 6, 1), -+ PIN_FIELD_BASE(56, 56, 6, 0x30, 0x10, 1, 1), -+}; -+ -+static const struct mtk_pin_field_calc mt7981_pin_pd_range[] = { -+ PIN_FIELD_BASE(40, 40, 7, 0x40, 0x10, 1, 1), -+ PIN_FIELD_BASE(41, 41, 7, 0x40, 0x10, 0, 1), -+ PIN_FIELD_BASE(42, 42, 7, 0x40, 0x10, 9, 1), -+ PIN_FIELD_BASE(43, 43, 7, 0x40, 0x10, 7, 1), -+ PIN_FIELD_BASE(44, 44, 7, 0x40, 0x10, 8, 1), -+ PIN_FIELD_BASE(45, 45, 7, 0x40, 0x10, 3, 1), -+ PIN_FIELD_BASE(46, 46, 7, 0x40, 0x10, 4, 1), -+ PIN_FIELD_BASE(47, 47, 7, 0x40, 0x10, 5, 1), -+ PIN_FIELD_BASE(48, 48, 7, 0x40, 0x10, 6, 1), -+ PIN_FIELD_BASE(49, 49, 7, 0x40, 0x10, 2, 1), -+ -+ PIN_FIELD_BASE(50, 50, 6, 0x20, 0x10, 0, 1), -+ PIN_FIELD_BASE(51, 51, 6, 0x20, 0x10, 2, 1), -+ PIN_FIELD_BASE(52, 52, 6, 0x20, 0x10, 3, 1), -+ PIN_FIELD_BASE(53, 53, 6, 0x20, 0x10, 4, 1), -+ PIN_FIELD_BASE(54, 54, 6, 0x20, 0x10, 5, 1), -+ PIN_FIELD_BASE(55, 55, 6, 0x20, 0x10, 6, 1), -+ PIN_FIELD_BASE(56, 56, 6, 0x20, 0x10, 1, 1), -+}; -+ -+static const struct mtk_pin_field_calc mt7981_pin_drv_range[] = { -+ PIN_FIELD_BASE(0, 0, 1, 0x00, 0x10, 3, 3), -+ PIN_FIELD_BASE(1, 1, 1, 0x00, 0x10, 0, 3), -+ -+ PIN_FIELD_BASE(2, 2, 5, 0x00, 0x10, 18, 3), -+ -+ PIN_FIELD_BASE(3, 3, 4, 0x00, 0x10, 18, 1), -+ PIN_FIELD_BASE(4, 4, 4, 0x00, 0x10, 6, 1), -+ PIN_FIELD_BASE(5, 5, 4, 0x00, 0x10, 3, 3), -+ PIN_FIELD_BASE(6, 6, 4, 0x00, 0x10, 9, 3), -+ PIN_FIELD_BASE(7, 7, 4, 0x00, 0x10, 0, 3), -+ PIN_FIELD_BASE(8, 8, 4, 0x00, 0x10, 12, 3), -+ -+ PIN_FIELD_BASE(9, 9, 5, 0x00, 0x10, 27, 3), -+ PIN_FIELD_BASE(10, 10, 5, 0x00, 0x10, 24, 3), -+ PIN_FIELD_BASE(11, 11, 5, 0x00, 0x10, 0, 3), -+ PIN_FIELD_BASE(12, 12, 5, 0x00, 0x10, 21, 3), -+ PIN_FIELD_BASE(13, 13, 5, 0x00, 0x10, 3, 3), -+ -+ PIN_FIELD_BASE(14, 14, 4, 0x00, 0x10, 27, 3), -+ -+ PIN_FIELD_BASE(15, 15, 2, 0x00, 0x10, 0, 3), -+ PIN_FIELD_BASE(16, 16, 2, 0x00, 0x10, 3, 3), -+ PIN_FIELD_BASE(17, 17, 2, 0x00, 0x10, 15, 3), -+ PIN_FIELD_BASE(18, 18, 2, 0x00, 0x10, 12, 3), -+ PIN_FIELD_BASE(19, 19, 2, 0x00, 0x10, 6, 3), -+ PIN_FIELD_BASE(20, 20, 2, 0x00, 0x10, 9, 3), -+ PIN_FIELD_BASE(21, 21, 2, 0x00, 0x10, 18, 3), -+ PIN_FIELD_BASE(22, 22, 2, 0x00, 0x10, 21, 3), -+ PIN_FIELD_BASE(23, 23, 2, 0x00, 0x10, 0, 3), -+ PIN_FIELD_BASE(24, 24, 2, 0x00, 0x10, 27, 3), -+ PIN_FIELD_BASE(25, 25, 2, 0x00, 0x10, 24, 3), -+ -+ PIN_FIELD_BASE(26, 26, 5, 0x00, 0x10, 0, 3), -+ PIN_FIELD_BASE(27, 27, 5, 0x00, 0x10, 12, 3), -+ PIN_FIELD_BASE(28, 28, 5, 0x00, 0x10, 9, 3), -+ PIN_FIELD_BASE(29, 29, 5, 0x00, 0x10, 3, 3), -+ PIN_FIELD_BASE(30, 30, 5, 0x00, 0x10, 6, 3), -+ PIN_FIELD_BASE(31, 31, 5, 0x00, 0x10, 15, 3), -+ -+ PIN_FIELD_BASE(32, 32, 1, 0x00, 0x10, 9, 3), -+ PIN_FIELD_BASE(33, 33, 1, 0x00, 0x10, 12, 3), -+ -+ PIN_FIELD_BASE(34, 34, 4, 0x00, 0x10, 15, 3), -+ PIN_FIELD_BASE(35, 35, 4, 0x00, 0x10, 21, 3), -+ -+ PIN_FIELD_BASE(36, 36, 3, 0x00, 0x10, 6, 3), -+ PIN_FIELD_BASE(37, 37, 3, 0x00, 0x10, 9, 3), -+ PIN_FIELD_BASE(38, 38, 3, 0x00, 0x10, 0, 3), -+ PIN_FIELD_BASE(39, 39, 3, 0x00, 0x10, 3, 3), -+ -+ PIN_FIELD_BASE(40, 40, 7, 0x00, 0x10, 3, 3), -+ PIN_FIELD_BASE(41, 41, 7, 0x00, 0x10, 0, 3), -+ PIN_FIELD_BASE(42, 42, 7, 0x00, 0x10, 27, 3), -+ PIN_FIELD_BASE(43, 43, 7, 0x00, 0x10, 21, 3), -+ PIN_FIELD_BASE(44, 44, 7, 0x00, 0x10, 24, 3), -+ PIN_FIELD_BASE(45, 45, 7, 0x00, 0x10, 9, 3), -+ PIN_FIELD_BASE(46, 46, 7, 0x00, 0x10, 12, 3), -+ PIN_FIELD_BASE(47, 47, 7, 0x00, 0x10, 15, 3), -+ PIN_FIELD_BASE(48, 48, 7, 0x00, 0x10, 18, 3), -+ PIN_FIELD_BASE(49, 49, 7, 0x00, 0x10, 6, 3), -+ -+ PIN_FIELD_BASE(50, 50, 6, 0x00, 0x10, 0, 3), -+ PIN_FIELD_BASE(51, 51, 6, 0x00, 0x10, 6, 3), -+ PIN_FIELD_BASE(52, 52, 6, 0x00, 0x10, 9, 3), -+ PIN_FIELD_BASE(53, 53, 6, 0x00, 0x10, 12, 3), -+ PIN_FIELD_BASE(54, 54, 6, 0x00, 0x10, 15, 3), -+ PIN_FIELD_BASE(55, 55, 6, 0x00, 0x10, 18, 3), -+ PIN_FIELD_BASE(56, 56, 6, 0x00, 0x10, 3, 3), -+}; -+ -+static const struct mtk_pin_field_calc mt7981_pin_pupd_range[] = { -+ PIN_FIELD_BASE(0, 0, 1, 0x20, 0x10, 1, 1), -+ PIN_FIELD_BASE(1, 1, 1, 0x20, 0x10, 0, 1), -+ PIN_FIELD_BASE(2, 2, 5, 0x30, 0x10, 6, 1), -+ PIN_FIELD_BASE(3, 3, 4, 0x30, 0x10, 6, 1), -+ PIN_FIELD_BASE(4, 4, 4, 0x30, 0x10, 2, 1), -+ PIN_FIELD_BASE(5, 5, 4, 0x30, 0x10, 1, 1), -+ PIN_FIELD_BASE(6, 6, 4, 0x30, 0x10, 3, 1), -+ PIN_FIELD_BASE(7, 7, 4, 0x30, 0x10, 0, 1), -+ PIN_FIELD_BASE(8, 8, 4, 0x30, 0x10, 4, 1), -+ -+ PIN_FIELD_BASE(9, 9, 5, 0x30, 0x10, 9, 1), -+ PIN_FIELD_BASE(10, 10, 5, 0x30, 0x10, 8, 1), -+ PIN_FIELD_BASE(11, 11, 5, 0x30, 0x10, 10, 1), -+ PIN_FIELD_BASE(12, 12, 5, 0x30, 0x10, 7, 1), -+ PIN_FIELD_BASE(13, 13, 5, 0x30, 0x10, 11, 1), -+ -+ PIN_FIELD_BASE(14, 14, 4, 0x30, 0x10, 8, 1), -+ -+ PIN_FIELD_BASE(15, 15, 2, 0x30, 0x10, 0, 1), -+ PIN_FIELD_BASE(16, 16, 2, 0x30, 0x10, 1, 1), -+ PIN_FIELD_BASE(17, 17, 2, 0x30, 0x10, 5, 1), -+ PIN_FIELD_BASE(18, 18, 2, 0x30, 0x10, 4, 1), -+ PIN_FIELD_BASE(19, 19, 2, 0x30, 0x10, 2, 1), -+ PIN_FIELD_BASE(20, 20, 2, 0x90, 0x10, 3, 1), -+ PIN_FIELD_BASE(21, 21, 2, 0x30, 0x10, 6, 1), -+ PIN_FIELD_BASE(22, 22, 2, 0x30, 0x10, 7, 1), -+ PIN_FIELD_BASE(23, 23, 2, 0x30, 0x10, 10, 1), -+ PIN_FIELD_BASE(24, 24, 2, 0x30, 0x10, 9, 1), -+ PIN_FIELD_BASE(25, 25, 2, 0x30, 0x10, 8, 1), -+ -+ PIN_FIELD_BASE(26, 26, 5, 0x30, 0x10, 0, 1), -+ PIN_FIELD_BASE(27, 27, 5, 0x30, 0x10, 4, 1), -+ PIN_FIELD_BASE(28, 28, 5, 0x30, 0x10, 3, 1), -+ PIN_FIELD_BASE(29, 29, 5, 0x30, 0x10, 1, 1), -+ PIN_FIELD_BASE(30, 30, 5, 0x30, 0x10, 2, 1), -+ PIN_FIELD_BASE(31, 31, 5, 0x30, 0x10, 5, 1), -+ -+ PIN_FIELD_BASE(32, 32, 1, 0x20, 0x10, 2, 1), -+ PIN_FIELD_BASE(33, 33, 1, 0x20, 0x10, 3, 1), -+ -+ PIN_FIELD_BASE(34, 34, 4, 0x30, 0x10, 5, 1), -+ PIN_FIELD_BASE(35, 35, 4, 0x30, 0x10, 7, 1), -+ -+ PIN_FIELD_BASE(36, 36, 3, 0x20, 0x10, 2, 1), -+ PIN_FIELD_BASE(37, 37, 3, 0x20, 0x10, 3, 1), -+ PIN_FIELD_BASE(38, 38, 3, 0x20, 0x10, 0, 1), -+ PIN_FIELD_BASE(39, 39, 3, 0x20, 0x10, 1, 1), -+}; -+ -+static const struct mtk_pin_field_calc mt7981_pin_r0_range[] = { -+ PIN_FIELD_BASE(0, 0, 1, 0x30, 0x10, 1, 1), -+ PIN_FIELD_BASE(1, 1, 1, 0x30, 0x10, 0, 1), -+ PIN_FIELD_BASE(2, 2, 5, 0x40, 0x10, 6, 1), -+ PIN_FIELD_BASE(3, 3, 4, 0x40, 0x10, 6, 1), -+ PIN_FIELD_BASE(4, 4, 4, 0x40, 0x10, 2, 1), -+ PIN_FIELD_BASE(5, 5, 4, 0x40, 0x10, 1, 1), -+ PIN_FIELD_BASE(6, 6, 4, 0x40, 0x10, 3, 1), -+ PIN_FIELD_BASE(7, 7, 4, 0x40, 0x10, 0, 1), -+ PIN_FIELD_BASE(8, 8, 4, 0x40, 0x10, 4, 1), -+ -+ PIN_FIELD_BASE(9, 9, 5, 0x40, 0x10, 9, 1), -+ PIN_FIELD_BASE(10, 10, 5, 0x40, 0x10, 8, 1), -+ PIN_FIELD_BASE(11, 11, 5, 0x40, 0x10, 10, 1), -+ PIN_FIELD_BASE(12, 12, 5, 0x40, 0x10, 7, 1), -+ PIN_FIELD_BASE(13, 13, 5, 0x40, 0x10, 11, 1), -+ -+ PIN_FIELD_BASE(14, 14, 4, 0x40, 0x10, 8, 1), -+ -+ PIN_FIELD_BASE(15, 15, 2, 0x40, 0x10, 0, 1), -+ PIN_FIELD_BASE(16, 16, 2, 0x40, 0x10, 1, 1), -+ PIN_FIELD_BASE(17, 17, 2, 0x40, 0x10, 5, 1), -+ PIN_FIELD_BASE(18, 18, 2, 0x40, 0x10, 4, 1), -+ PIN_FIELD_BASE(19, 19, 2, 0x40, 0x10, 2, 1), -+ PIN_FIELD_BASE(20, 20, 2, 0x40, 0x10, 3, 1), -+ PIN_FIELD_BASE(21, 21, 2, 0x40, 0x10, 6, 1), -+ PIN_FIELD_BASE(22, 22, 2, 0x40, 0x10, 7, 1), -+ PIN_FIELD_BASE(23, 23, 2, 0x40, 0x10, 10, 1), -+ PIN_FIELD_BASE(24, 24, 2, 0x40, 0x10, 9, 1), -+ PIN_FIELD_BASE(25, 25, 2, 0x40, 0x10, 8, 1), -+ -+ PIN_FIELD_BASE(26, 26, 5, 0x40, 0x10, 0, 1), -+ PIN_FIELD_BASE(27, 27, 5, 0x40, 0x10, 4, 1), -+ PIN_FIELD_BASE(28, 28, 5, 0x40, 0x10, 3, 1), -+ PIN_FIELD_BASE(29, 29, 5, 0x40, 0x10, 1, 1), -+ PIN_FIELD_BASE(30, 30, 5, 0x40, 0x10, 2, 1), -+ PIN_FIELD_BASE(31, 31, 5, 0x40, 0x10, 5, 1), -+ -+ PIN_FIELD_BASE(32, 32, 1, 0x30, 0x10, 2, 1), -+ PIN_FIELD_BASE(33, 33, 1, 0x30, 0x10, 3, 1), -+ -+ PIN_FIELD_BASE(34, 34, 4, 0x40, 0x10, 5, 1), -+ PIN_FIELD_BASE(35, 35, 4, 0x40, 0x10, 7, 1), -+ -+ PIN_FIELD_BASE(36, 36, 3, 0x30, 0x10, 2, 1), -+ PIN_FIELD_BASE(37, 37, 3, 0x30, 0x10, 3, 1), -+ PIN_FIELD_BASE(38, 38, 3, 0x30, 0x10, 0, 1), -+ PIN_FIELD_BASE(39, 39, 3, 0x30, 0x10, 1, 1), -+}; -+ -+static const struct mtk_pin_field_calc mt7981_pin_r1_range[] = { -+ PIN_FIELD_BASE(0, 0, 1, 0x40, 0x10, 1, 1), -+ PIN_FIELD_BASE(1, 1, 1, 0x40, 0x10, 0, 1), -+ PIN_FIELD_BASE(2, 2, 5, 0x50, 0x10, 6, 1), -+ PIN_FIELD_BASE(3, 3, 4, 0x50, 0x10, 6, 1), -+ PIN_FIELD_BASE(4, 4, 4, 0x50, 0x10, 2, 1), -+ PIN_FIELD_BASE(5, 5, 4, 0x50, 0x10, 1, 1), -+ PIN_FIELD_BASE(6, 6, 4, 0x50, 0x10, 3, 1), -+ PIN_FIELD_BASE(7, 7, 4, 0x50, 0x10, 0, 1), -+ PIN_FIELD_BASE(8, 8, 4, 0x50, 0x10, 4, 1), -+ -+ PIN_FIELD_BASE(9, 9, 5, 0x50, 0x10, 9, 1), -+ PIN_FIELD_BASE(10, 10, 5, 0x50, 0x10, 8, 1), -+ PIN_FIELD_BASE(11, 11, 5, 0x50, 0x10, 10, 1), -+ PIN_FIELD_BASE(12, 12, 5, 0x50, 0x10, 7, 1), -+ PIN_FIELD_BASE(13, 13, 5, 0x50, 0x10, 11, 1), -+ -+ PIN_FIELD_BASE(14, 14, 4, 0x50, 0x10, 8, 1), -+ -+ PIN_FIELD_BASE(15, 15, 2, 0x50, 0x10, 0, 1), -+ PIN_FIELD_BASE(16, 16, 2, 0x50, 0x10, 1, 1), -+ PIN_FIELD_BASE(17, 17, 2, 0x50, 0x10, 5, 1), -+ PIN_FIELD_BASE(18, 18, 2, 0x50, 0x10, 4, 1), -+ PIN_FIELD_BASE(19, 19, 2, 0x50, 0x10, 2, 1), -+ PIN_FIELD_BASE(20, 20, 2, 0x50, 0x10, 3, 1), -+ PIN_FIELD_BASE(21, 21, 2, 0x50, 0x10, 6, 1), -+ PIN_FIELD_BASE(22, 22, 2, 0x50, 0x10, 7, 1), -+ PIN_FIELD_BASE(23, 23, 2, 0x50, 0x10, 10, 1), -+ PIN_FIELD_BASE(24, 24, 2, 0x50, 0x10, 9, 1), -+ PIN_FIELD_BASE(25, 25, 2, 0x50, 0x10, 8, 1), -+ -+ PIN_FIELD_BASE(26, 26, 5, 0x50, 0x10, 0, 1), -+ PIN_FIELD_BASE(27, 27, 5, 0x50, 0x10, 4, 1), -+ PIN_FIELD_BASE(28, 28, 5, 0x50, 0x10, 3, 1), -+ PIN_FIELD_BASE(29, 29, 5, 0x50, 0x10, 1, 1), -+ PIN_FIELD_BASE(30, 30, 5, 0x50, 0x10, 2, 1), -+ PIN_FIELD_BASE(31, 31, 5, 0x50, 0x10, 5, 1), -+ -+ PIN_FIELD_BASE(32, 32, 1, 0x40, 0x10, 2, 1), -+ PIN_FIELD_BASE(33, 33, 1, 0x40, 0x10, 3, 1), -+ -+ PIN_FIELD_BASE(34, 34, 4, 0x50, 0x10, 5, 1), -+ PIN_FIELD_BASE(35, 35, 4, 0x50, 0x10, 7, 1), -+ -+ PIN_FIELD_BASE(36, 36, 3, 0x40, 0x10, 2, 1), -+ PIN_FIELD_BASE(37, 37, 3, 0x40, 0x10, 3, 1), -+ PIN_FIELD_BASE(38, 38, 3, 0x40, 0x10, 0, 1), -+ PIN_FIELD_BASE(39, 39, 3, 0x40, 0x10, 1, 1), -+}; -+ -+static const unsigned int mt7981_pull_type[] = { -+ MTK_PULL_PUPD_R1R0_TYPE,/*0*/ MTK_PULL_PUPD_R1R0_TYPE,/*1*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*2*/ MTK_PULL_PUPD_R1R0_TYPE,/*3*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*4*/ MTK_PULL_PUPD_R1R0_TYPE,/*5*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*6*/ MTK_PULL_PUPD_R1R0_TYPE,/*7*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*8*/ MTK_PULL_PUPD_R1R0_TYPE,/*9*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*10*/ MTK_PULL_PUPD_R1R0_TYPE,/*11*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*12*/ MTK_PULL_PUPD_R1R0_TYPE,/*13*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*14*/ MTK_PULL_PUPD_R1R0_TYPE,/*15*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*16*/ MTK_PULL_PUPD_R1R0_TYPE,/*17*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*18*/ MTK_PULL_PUPD_R1R0_TYPE,/*19*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*20*/ MTK_PULL_PUPD_R1R0_TYPE,/*21*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*22*/ MTK_PULL_PUPD_R1R0_TYPE,/*23*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*24*/ MTK_PULL_PUPD_R1R0_TYPE,/*25*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*26*/ MTK_PULL_PUPD_R1R0_TYPE,/*27*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*28*/ MTK_PULL_PUPD_R1R0_TYPE,/*29*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*30*/ MTK_PULL_PUPD_R1R0_TYPE,/*31*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*32*/ MTK_PULL_PUPD_R1R0_TYPE,/*33*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*34*/ MTK_PULL_PUPD_R1R0_TYPE,/*35*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*36*/ MTK_PULL_PUPD_R1R0_TYPE,/*37*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*38*/ MTK_PULL_PUPD_R1R0_TYPE,/*39*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*40*/ MTK_PULL_PUPD_R1R0_TYPE,/*41*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*42*/ MTK_PULL_PUPD_R1R0_TYPE,/*43*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*44*/ MTK_PULL_PUPD_R1R0_TYPE,/*45*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*46*/ MTK_PULL_PUPD_R1R0_TYPE,/*47*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*48*/ MTK_PULL_PUPD_R1R0_TYPE,/*49*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*50*/ MTK_PULL_PUPD_R1R0_TYPE,/*51*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*52*/ MTK_PULL_PUPD_R1R0_TYPE,/*53*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*54*/ MTK_PULL_PUPD_R1R0_TYPE,/*55*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*56*/ MTK_PULL_PUPD_R1R0_TYPE,/*57*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*58*/ MTK_PULL_PUPD_R1R0_TYPE,/*59*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*60*/ MTK_PULL_PUPD_R1R0_TYPE,/*61*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*62*/ MTK_PULL_PUPD_R1R0_TYPE,/*63*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*64*/ MTK_PULL_PUPD_R1R0_TYPE,/*65*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*66*/ MTK_PULL_PUPD_R1R0_TYPE,/*67*/ -+ MTK_PULL_PUPD_R1R0_TYPE,/*68*/ MTK_PULL_PU_PD_TYPE,/*69*/ -+ MTK_PULL_PU_PD_TYPE,/*70*/ MTK_PULL_PU_PD_TYPE,/*71*/ -+ MTK_PULL_PU_PD_TYPE,/*72*/ MTK_PULL_PU_PD_TYPE,/*73*/ -+ MTK_PULL_PU_PD_TYPE,/*74*/ MTK_PULL_PU_PD_TYPE,/*75*/ -+ MTK_PULL_PU_PD_TYPE,/*76*/ MTK_PULL_PU_PD_TYPE,/*77*/ -+ MTK_PULL_PU_PD_TYPE,/*78*/ MTK_PULL_PU_PD_TYPE,/*79*/ -+ MTK_PULL_PU_PD_TYPE,/*80*/ MTK_PULL_PU_PD_TYPE,/*81*/ -+ MTK_PULL_PU_PD_TYPE,/*82*/ MTK_PULL_PU_PD_TYPE,/*83*/ -+ MTK_PULL_PU_PD_TYPE,/*84*/ MTK_PULL_PU_PD_TYPE,/*85*/ -+ MTK_PULL_PU_PD_TYPE,/*86*/ MTK_PULL_PU_PD_TYPE,/*87*/ -+ MTK_PULL_PU_PD_TYPE,/*88*/ MTK_PULL_PU_PD_TYPE,/*89*/ -+ MTK_PULL_PU_PD_TYPE,/*90*/ MTK_PULL_PU_PD_TYPE,/*91*/ -+ MTK_PULL_PU_PD_TYPE,/*92*/ MTK_PULL_PU_PD_TYPE,/*93*/ -+ MTK_PULL_PU_PD_TYPE,/*94*/ MTK_PULL_PU_PD_TYPE,/*95*/ -+ MTK_PULL_PU_PD_TYPE,/*96*/ MTK_PULL_PU_PD_TYPE,/*97*/ -+ MTK_PULL_PU_PD_TYPE,/*98*/ MTK_PULL_PU_PD_TYPE,/*99*/ -+ MTK_PULL_PU_PD_TYPE,/*100*/ -+}; -+ -+static const struct mtk_pin_reg_calc mt7981_reg_cals[] = { -+ [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt7981_pin_mode_range), -+ [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt7981_pin_dir_range), -+ [PINCTRL_PIN_REG_DI] = MTK_RANGE(mt7981_pin_di_range), -+ [PINCTRL_PIN_REG_DO] = MTK_RANGE(mt7981_pin_do_range), -+ [PINCTRL_PIN_REG_SMT] = MTK_RANGE(mt7981_pin_smt_range), -+ [PINCTRL_PIN_REG_IES] = MTK_RANGE(mt7981_pin_ies_range), -+ [PINCTRL_PIN_REG_PU] = MTK_RANGE(mt7981_pin_pu_range), -+ [PINCTRL_PIN_REG_PD] = MTK_RANGE(mt7981_pin_pd_range), -+ [PINCTRL_PIN_REG_DRV] = MTK_RANGE(mt7981_pin_drv_range), -+ [PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt7981_pin_pupd_range), -+ [PINCTRL_PIN_REG_R0] = MTK_RANGE(mt7981_pin_r0_range), -+ [PINCTRL_PIN_REG_R1] = MTK_RANGE(mt7981_pin_r1_range), -+}; -+ -+static const struct mtk_pin_desc mt7981_pins[] = { -+ MT7981_PIN(0, "GPIO_WPS"), -+ MT7981_PIN(1, "GPIO_RESET"), -+ MT7981_PIN(2, "SYS_WATCHDOG"), -+ MT7981_PIN(3, "PCIE_PERESET_N"), -+ MT7981_PIN(4, "JTAG_JTDO"), -+ MT7981_PIN(5, "JTAG_JTDI"), -+ MT7981_PIN(6, "JTAG_JTMS"), -+ MT7981_PIN(7, "JTAG_JTCLK"), -+ MT7981_PIN(8, "JTAG_JTRST_N"), -+ MT7981_PIN(9, "WO_JTAG_JTDO"), -+ MT7981_PIN(10, "WO_JTAG_JTDI"), -+ MT7981_PIN(11, "WO_JTAG_JTMS"), -+ MT7981_PIN(12, "WO_JTAG_JTCLK"), -+ MT7981_PIN(13, "WO_JTAG_JTRST_N"), -+ MT7981_PIN(14, "USB_VBUS"), -+ MT7981_PIN(15, "PWM0"), -+ MT7981_PIN(16, "SPI0_CLK"), -+ MT7981_PIN(17, "SPI0_MOSI"), -+ MT7981_PIN(18, "SPI0_MISO"), -+ MT7981_PIN(19, "SPI0_CS"), -+ MT7981_PIN(20, "SPI0_HOLD"), -+ MT7981_PIN(21, "SPI0_WP"), -+ MT7981_PIN(22, "SPI1_CLK"), -+ MT7981_PIN(23, "SPI1_MOSI"), -+ MT7981_PIN(24, "SPI1_MISO"), -+ MT7981_PIN(25, "SPI1_CS"), -+ MT7981_PIN(26, "SPI2_CLK"), -+ MT7981_PIN(27, "SPI2_MOSI"), -+ MT7981_PIN(28, "SPI2_MISO"), -+ MT7981_PIN(29, "SPI2_CS"), -+ MT7981_PIN(30, "SPI2_HOLD"), -+ MT7981_PIN(31, "SPI2_WP"), -+ MT7981_PIN(32, "UART0_RXD"), -+ MT7981_PIN(33, "UART0_TXD"), -+ MT7981_PIN(34, "PCIE_CLK_REQ"), -+ MT7981_PIN(35, "PCIE_WAKE_N"), -+ MT7981_PIN(36, "SMI_MDC"), -+ MT7981_PIN(37, "SMI_MDIO"), -+ MT7981_PIN(38, "GBE_INT"), -+ MT7981_PIN(39, "GBE_RESET"), -+ MT7981_PIN(40, "WF_DIG_RESETB"), -+ MT7981_PIN(41, "WF_CBA_RESETB"), -+ MT7981_PIN(42, "WF_XO_REQ"), -+ MT7981_PIN(43, "WF_TOP_CLK"), -+ MT7981_PIN(44, "WF_TOP_DATA"), -+ MT7981_PIN(45, "WF_HB1"), -+ MT7981_PIN(46, "WF_HB2"), -+ MT7981_PIN(47, "WF_HB3"), -+ MT7981_PIN(48, "WF_HB4"), -+ MT7981_PIN(49, "WF_HB0"), -+ MT7981_PIN(50, "WF_HB0_B"), -+ MT7981_PIN(51, "WF_HB5"), -+ MT7981_PIN(52, "WF_HB6"), -+ MT7981_PIN(53, "WF_HB7"), -+ MT7981_PIN(54, "WF_HB8"), -+ MT7981_PIN(55, "WF_HB9"), -+ MT7981_PIN(56, "WF_HB10"), -+}; -+ -+/* List all groups consisting of these pins dedicated to the enablement of -+ * certain hardware block and the corresponding mode for all of the pins. -+ * The hardware probably has multiple combinations of these pinouts. -+ */ -+ -+/* WA_AICE */ -+static int mt7981_wa_aice1_pins[] = { 0, 1, }; -+static int mt7981_wa_aice1_funcs[] = { 2, 2, }; -+ -+static int mt7981_wa_aice2_pins[] = { 0, 1, }; -+static int mt7981_wa_aice2_funcs[] = { 3, 3, }; -+ -+static int mt7981_wa_aice3_pins[] = { 28, 29, }; -+static int mt7981_wa_aice3_funcs[] = { 3, 3, }; -+ -+static int mt7981_wm_aice1_pins[] = { 9, 10, }; -+static int mt7981_wm_aice1_funcs[] = { 2, 2, }; -+ -+static int mt7981_wm_aice2_pins[] = { 30, 31, }; -+static int mt7981_wm_aice2_funcs[] = { 5, 5, }; -+ -+/* WM_UART */ -+static int mt7981_wm_uart_0_pins[] = { 0, 1, }; -+static int mt7981_wm_uart_0_funcs[] = { 5, 5, }; -+ -+static int mt7981_wm_uart_1_pins[] = { 20, 21, }; -+static int mt7981_wm_uart_1_funcs[] = { 4, 4, }; -+ -+static int mt7981_wm_uart_2_pins[] = { 30, 31, }; -+static int mt7981_wm_uart_2_funcs[] = { 3, 3, }; -+ -+/* DFD */ -+static int mt7981_dfd_pins[] = { 0, 1, 4, 5, }; -+static int mt7981_dfd_funcs[] = { 5, 5, 6, 6, }; -+ -+/* SYS_WATCHDOG */ -+static int mt7981_watchdog_pins[] = { 2, }; -+static int mt7981_watchdog_funcs[] = { 1, }; -+ -+static int mt7981_watchdog1_pins[] = { 13, }; -+static int mt7981_watchdog1_funcs[] = { 5, }; -+ -+/* PCIE_PERESET_N */ -+static int mt7981_pcie_pereset_pins[] = { 3, }; -+static int mt7981_pcie_pereset_funcs[] = { 1, }; -+ -+/* JTAG */ -+static int mt7981_jtag_pins[] = { 4, 5, 6, 7, 8, }; -+static int mt7981_jtag_funcs[] = { 1, 1, 1, 1, 1, }; -+ -+/* WM_JTAG */ -+static int mt7981_wm_jtag_0_pins[] = { 4, 5, 6, 7, 8, }; -+static int mt7981_wm_jtag_0_funcs[] = { 2, 2, 2, 2, 2, }; -+ -+static int mt7981_wm_jtag_1_pins[] = { 20, 21, 22, 23, 24, }; -+static int mt7981_wm_jtag_1_funcs[] = { 5, 5, 5, 5, 5, }; -+ -+/* WO0_JTAG */ -+static int mt7981_wo0_jtag_0_pins[] = { 9, 10, 11, 12, 13, }; -+static int mt7981_wo0_jtag_0_funcs[] = { 1, 1, 1, 1, 1, }; -+ -+static int mt7981_wo0_jtag_1_pins[] = { 25, 26, 27, 28, 29, }; -+static int mt7981_wo0_jtag_1_funcs[] = { 5, 5, 5, 5, 5, }; -+ -+/* UART2 */ -+static int mt7981_uart2_0_pins[] = { 4, 5, 6, 7, }; -+static int mt7981_uart2_0_funcs[] = { 3, 3, 3, 3, }; -+ -+/* GBE_LED0 */ -+static int mt7981_gbe_led0_pins[] = { 8, }; -+static int mt7981_gbe_led0_funcs[] = { 3, }; -+ -+/* PTA_EXT */ -+static int mt7981_pta_ext_0_pins[] = { 4, 5, 6, }; -+static int mt7981_pta_ext_0_funcs[] = { 4, 4, 4, }; -+ -+static int mt7981_pta_ext_1_pins[] = { 22, 23, 24, }; -+static int mt7981_pta_ext_1_funcs[] = { 4, 4, 4, }; -+ -+/* PWM2 */ -+static int mt7981_pwm2_pins[] = { 7, }; -+static int mt7981_pwm2_funcs[] = { 4, }; -+ -+/* NET_WO0_UART_TXD */ -+static int mt7981_net_wo0_uart_txd_0_pins[] = { 8, }; -+static int mt7981_net_wo0_uart_txd_0_funcs[] = { 4, }; -+ -+static int mt7981_net_wo0_uart_txd_1_pins[] = { 14, }; -+static int mt7981_net_wo0_uart_txd_1_funcs[] = { 3, }; -+ -+static int mt7981_net_wo0_uart_txd_2_pins[] = { 15, }; -+static int mt7981_net_wo0_uart_txd_2_funcs[] = { 4, }; -+ -+/* SPI1 */ -+static int mt7981_spi1_0_pins[] = { 4, 5, 6, 7, }; -+static int mt7981_spi1_0_funcs[] = { 5, 5, 5, 5, }; -+ -+/* I2C */ -+static int mt7981_i2c0_0_pins[] = { 6, 7, }; -+static int mt7981_i2c0_0_funcs[] = { 6, 6, }; -+ -+static int mt7981_i2c0_1_pins[] = { 30, 31, }; -+static int mt7981_i2c0_1_funcs[] = { 4, 4, }; -+ -+static int mt7981_i2c0_2_pins[] = { 36, 37, }; -+static int mt7981_i2c0_2_funcs[] = { 2, 2, }; -+ -+static int mt7981_u2_phy_i2c_pins[] = { 30, 31, }; -+static int mt7981_u2_phy_i2c_funcs[] = { 6, 6, }; -+ -+static int mt7981_u3_phy_i2c_pins[] = { 32, 33, }; -+static int mt7981_u3_phy_i2c_funcs[] = { 3, 3, }; -+ -+static int mt7981_sgmii1_phy_i2c_pins[] = { 32, 33, }; -+static int mt7981_sgmii1_phy_i2c_funcs[] = { 2, 2, }; -+ -+static int mt7981_sgmii0_phy_i2c_pins[] = { 32, 33, }; -+static int mt7981_sgmii0_phy_i2c_funcs[] = { 5, 5, }; -+ -+/* DFD_NTRST */ -+static int mt7981_dfd_ntrst_pins[] = { 8, }; -+static int mt7981_dfd_ntrst_funcs[] = { 6, }; -+ -+/* PWM0 */ -+static int mt7981_pwm0_0_pins[] = { 13, }; -+static int mt7981_pwm0_0_funcs[] = { 2, }; -+ -+static int mt7981_pwm0_1_pins[] = { 15, }; -+static int mt7981_pwm0_1_funcs[] = { 1, }; -+ -+/* PWM1 */ -+static int mt7981_pwm1_0_pins[] = { 14, }; -+static int mt7981_pwm1_0_funcs[] = { 2, }; -+ -+static int mt7981_pwm1_1_pins[] = { 15, }; -+static int mt7981_pwm1_1_funcs[] = { 3, }; -+ -+/* GBE_LED1 */ -+static int mt7981_gbe_led1_pins[] = { 13, }; -+static int mt7981_gbe_led1_funcs[] = { 3, }; -+ -+/* PCM */ -+static int mt7981_pcm_pins[] = { 9, 10, 11, 12, 13, 25 }; -+static int mt7981_pcm_funcs[] = { 4, 4, 4, 4, 4, 4, }; -+ -+/* UDI */ -+static int mt7981_udi_pins[] = { 9, 10, 11, 12, 13, }; -+static int mt7981_udi_funcs[] = { 6, 6, 6, 6, 6, }; -+ -+/* DRV_VBUS */ -+static int mt7981_drv_vbus_pins[] = { 14, }; -+static int mt7981_drv_vbus_funcs[] = { 1, }; -+ -+/* EMMC */ -+static int mt7981_emmc_45_pins[] = { 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, }; -+static int mt7981_emmc_45_funcs[] = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, }; -+ -+/* SNFI */ -+static int mt7981_snfi_pins[] = { 16, 17, 18, 19, 20, 21, }; -+static int mt7981_snfi_funcs[] = { 3, 3, 3, 3, 3, 3, }; -+ -+/* SPI0 */ -+static int mt7981_spi0_pins[] = { 16, 17, 18, 19, }; -+static int mt7981_spi0_funcs[] = { 1, 1, 1, 1, }; -+ -+/* SPI0 */ -+static int mt7981_spi0_wp_hold_pins[] = { 20, 21, }; -+static int mt7981_spi0_wp_hold_funcs[] = { 1, 1, }; -+ -+/* SPI1 */ -+static int mt7981_spi1_1_pins[] = { 22, 23, 24, 25, }; -+static int mt7981_spi1_1_funcs[] = { 1, 1, 1, 1, }; -+ -+/* SPI2 */ -+static int mt7981_spi2_pins[] = { 26, 27, 28, 29, }; -+static int mt7981_spi2_funcs[] = { 1, 1, 1, 1, }; -+ -+/* SPI2 */ -+static int mt7981_spi2_wp_hold_pins[] = { 30, 31, }; -+static int mt7981_spi2_wp_hold_funcs[] = { 1, 1, }; -+ -+/* UART1 */ -+static int mt7981_uart1_0_pins[] = { 16, 17, 18, 19, }; -+static int mt7981_uart1_0_funcs[] = { 4, 4, 4, 4, }; -+ -+static int mt7981_uart1_1_pins[] = { 26, 27, 28, 29, }; -+static int mt7981_uart1_1_funcs[] = { 2, 2, 2, 2, }; -+ -+/* UART2 */ -+static int mt7981_uart2_1_pins[] = { 22, 23, 24, 25, }; -+static int mt7981_uart2_1_funcs[] = { 3, 3, 3, 3, }; -+ -+/* UART0 */ -+static int mt7981_uart0_pins[] = { 32, 33, }; -+static int mt7981_uart0_funcs[] = { 1, 1, }; -+ -+/* PCIE_CLK_REQ */ -+static int mt7981_pcie_clk_pins[] = { 34, }; -+static int mt7981_pcie_clk_funcs[] = { 2, }; -+ -+/* PCIE_WAKE_N */ -+static int mt7981_pcie_wake_pins[] = { 35, }; -+static int mt7981_pcie_wake_funcs[] = { 2, }; -+ -+/* MDC_MDIO */ -+static int mt7981_smi_mdc_mdio_pins[] = { 36, 37, }; -+static int mt7981_smi_mdc_mdio_funcs[] = { 1, 1, }; -+ -+static int mt7981_gbe_ext_mdc_mdio_pins[] = { 36, 37, }; -+static int mt7981_gbe_ext_mdc_mdio_funcs[] = { 3, 3, }; -+ -+/* WF0_MODE1 */ -+static int mt7981_wf0_mode1_pins[] = { 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56 }; -+static int mt7981_wf0_mode1_funcs[] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 }; -+ -+/* WF0_MODE3 */ -+static int mt7981_wf0_mode3_pins[] = { 45, 46, 47, 48, 49, 51 }; -+static int mt7981_wf0_mode3_funcs[] = { 2, 2, 2, 2, 2, 2 }; -+ -+/* WF2G_LED */ -+static int mt7981_wf2g_led0_pins[] = { 30, }; -+static int mt7981_wf2g_led0_funcs[] = { 2, }; -+ -+static int mt7981_wf2g_led1_pins[] = { 34, }; -+static int mt7981_wf2g_led1_funcs[] = { 1, }; -+ -+/* WF5G_LED */ -+static int mt7981_wf5g_led0_pins[] = { 31, }; -+static int mt7981_wf5g_led0_funcs[] = { 2, }; -+ -+static int mt7981_wf5g_led1_pins[] = { 35, }; -+static int mt7981_wf5g_led1_funcs[] = { 1, }; -+ -+/* MT7531_INT */ -+static int mt7981_mt7531_int_pins[] = { 38, }; -+static int mt7981_mt7531_int_funcs[] = { 1, }; -+ -+/* ANT_SEL */ -+static int mt7981_ant_sel_pins[] = { 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 34, 35 }; -+static int mt7981_ant_sel_funcs[] = { 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6 }; -+ -+static const struct group_desc mt7981_groups[] = { -+ /* @GPIO(0,1): WA_AICE(2) */ -+ PINCTRL_PIN_GROUP("wa_aice1", mt7981_wa_aice1), -+ /* @GPIO(0,1): WA_AICE(3) */ -+ PINCTRL_PIN_GROUP("wa_aice2", mt7981_wa_aice2), -+ /* @GPIO(0,1): WM_UART(5) */ -+ PINCTRL_PIN_GROUP("wm_uart_0", mt7981_wm_uart_0), -+ /* @GPIO(0,1,4,5): DFD(6) */ -+ PINCTRL_PIN_GROUP("dfd", mt7981_dfd), -+ /* @GPIO(2): SYS_WATCHDOG(1) */ -+ PINCTRL_PIN_GROUP("watchdog", mt7981_watchdog), -+ /* @GPIO(3): PCIE_PERESET_N(1) */ -+ PINCTRL_PIN_GROUP("pcie_pereset", mt7981_pcie_pereset), -+ /* @GPIO(4,8) JTAG(1) */ -+ PINCTRL_PIN_GROUP("jtag", mt7981_jtag), -+ /* @GPIO(4,8) WM_JTAG(2) */ -+ PINCTRL_PIN_GROUP("wm_jtag_0", mt7981_wm_jtag_0), -+ /* @GPIO(9,13) WO0_JTAG(1) */ -+ PINCTRL_PIN_GROUP("wo0_jtag_0", mt7981_wo0_jtag_0), -+ /* @GPIO(4,7) WM_JTAG(3) */ -+ PINCTRL_PIN_GROUP("uart2_0", mt7981_uart2_0), -+ /* @GPIO(8) GBE_LED0(3) */ -+ PINCTRL_PIN_GROUP("gbe_led0", mt7981_gbe_led0), -+ /* @GPIO(4,6) PTA_EXT(4) */ -+ PINCTRL_PIN_GROUP("pta_ext_0", mt7981_pta_ext_0), -+ /* @GPIO(7) PWM2(4) */ -+ PINCTRL_PIN_GROUP("pwm2", mt7981_pwm2), -+ /* @GPIO(8) NET_WO0_UART_TXD(4) */ -+ PINCTRL_PIN_GROUP("net_wo0_uart_txd_0", mt7981_net_wo0_uart_txd_0), -+ /* @GPIO(4,7) SPI1(5) */ -+ PINCTRL_PIN_GROUP("spi1_0", mt7981_spi1_0), -+ /* @GPIO(6,7) I2C(5) */ -+ PINCTRL_PIN_GROUP("i2c0_0", mt7981_i2c0_0), -+ /* @GPIO(0,1,4,5): DFD_NTRST(6) */ -+ PINCTRL_PIN_GROUP("dfd_ntrst", mt7981_dfd_ntrst), -+ /* @GPIO(9,10): WM_AICE(2) */ -+ PINCTRL_PIN_GROUP("wm_aice1", mt7981_wm_aice1), -+ /* @GPIO(13): PWM0(2) */ -+ PINCTRL_PIN_GROUP("pwm0_0", mt7981_pwm0_0), -+ /* @GPIO(15): PWM0(1) */ -+ PINCTRL_PIN_GROUP("pwm0_1", mt7981_pwm0_1), -+ /* @GPIO(14): PWM1(2) */ -+ PINCTRL_PIN_GROUP("pwm1_0", mt7981_pwm1_0), -+ /* @GPIO(15): PWM1(3) */ -+ PINCTRL_PIN_GROUP("pwm1_1", mt7981_pwm1_1), -+ /* @GPIO(14) NET_WO0_UART_TXD(3) */ -+ PINCTRL_PIN_GROUP("net_wo0_uart_txd_1", mt7981_net_wo0_uart_txd_1), -+ /* @GPIO(15) NET_WO0_UART_TXD(4) */ -+ PINCTRL_PIN_GROUP("net_wo0_uart_txd_2", mt7981_net_wo0_uart_txd_2), -+ /* @GPIO(13) GBE_LED0(3) */ -+ PINCTRL_PIN_GROUP("gbe_led1", mt7981_gbe_led1), -+ /* @GPIO(9,13) PCM(4) */ -+ PINCTRL_PIN_GROUP("pcm", mt7981_pcm), -+ /* @GPIO(13): SYS_WATCHDOG1(5) */ -+ PINCTRL_PIN_GROUP("watchdog1", mt7981_watchdog1), -+ /* @GPIO(9,13) UDI(4) */ -+ PINCTRL_PIN_GROUP("udi", mt7981_udi), -+ /* @GPIO(14) DRV_VBUS(1) */ -+ PINCTRL_PIN_GROUP("drv_vbus", mt7981_drv_vbus), -+ /* @GPIO(15,25): EMMC(2) */ -+ PINCTRL_PIN_GROUP("emmc_45", mt7981_emmc_45), -+ /* @GPIO(16,21): SNFI(3) */ -+ PINCTRL_PIN_GROUP("snfi", mt7981_snfi), -+ /* @GPIO(16,19): SPI0(1) */ -+ PINCTRL_PIN_GROUP("spi0", mt7981_spi0), -+ /* @GPIO(20,21): SPI0(1) */ -+ PINCTRL_PIN_GROUP("spi0_wp_hold", mt7981_spi0_wp_hold), -+ /* @GPIO(22,25) SPI1(1) */ -+ PINCTRL_PIN_GROUP("spi1_1", mt7981_spi1_1), -+ /* @GPIO(26,29): SPI2(1) */ -+ PINCTRL_PIN_GROUP("spi2", mt7981_spi2), -+ /* @GPIO(30,31): SPI0(1) */ -+ PINCTRL_PIN_GROUP("spi2_wp_hold", mt7981_spi2_wp_hold), -+ /* @GPIO(16,19): UART1(4) */ -+ PINCTRL_PIN_GROUP("uart1_0", mt7981_uart1_0), -+ /* @GPIO(26,29): UART1(2) */ -+ PINCTRL_PIN_GROUP("uart1_1", mt7981_uart1_1), -+ /* @GPIO(22,25): UART1(3) */ -+ PINCTRL_PIN_GROUP("uart2_1", mt7981_uart2_1), -+ /* @GPIO(22,24) PTA_EXT(4) */ -+ PINCTRL_PIN_GROUP("pta_ext_1", mt7981_pta_ext_1), -+ /* @GPIO(20,21): WM_UART(4) */ -+ PINCTRL_PIN_GROUP("wm_aurt_1", mt7981_wm_uart_1), -+ /* @GPIO(30,31): WM_UART(3) */ -+ PINCTRL_PIN_GROUP("wm_aurt_2", mt7981_wm_uart_2), -+ /* @GPIO(20,24) WM_JTAG(5) */ -+ PINCTRL_PIN_GROUP("wm_jtag_1", mt7981_wm_jtag_1), -+ /* @GPIO(25,29) WO0_JTAG(5) */ -+ PINCTRL_PIN_GROUP("wo0_jtag_1", mt7981_wo0_jtag_1), -+ /* @GPIO(28,29): WA_AICE(3) */ -+ PINCTRL_PIN_GROUP("wa_aice3", mt7981_wa_aice3), -+ /* @GPIO(30,31): WM_AICE(5) */ -+ PINCTRL_PIN_GROUP("wm_aice2", mt7981_wm_aice2), -+ /* @GPIO(30,31): I2C(4) */ -+ PINCTRL_PIN_GROUP("i2c0_1", mt7981_i2c0_1), -+ /* @GPIO(30,31): I2C(6) */ -+ PINCTRL_PIN_GROUP("u2_phy_i2c", mt7981_u2_phy_i2c), -+ /* @GPIO(32,33): I2C(1) */ -+ PINCTRL_PIN_GROUP("uart0", mt7981_uart0), -+ /* @GPIO(32,33): I2C(2) */ -+ PINCTRL_PIN_GROUP("sgmii1_phy_i2c", mt7981_sgmii1_phy_i2c), -+ /* @GPIO(32,33): I2C(3) */ -+ PINCTRL_PIN_GROUP("u3_phy_i2c", mt7981_u3_phy_i2c), -+ /* @GPIO(32,33): I2C(5) */ -+ PINCTRL_PIN_GROUP("sgmii0_phy_i2c", mt7981_sgmii0_phy_i2c), -+ /* @GPIO(34): PCIE_CLK_REQ(2) */ -+ PINCTRL_PIN_GROUP("pcie_clk", mt7981_pcie_clk), -+ /* @GPIO(35): PCIE_WAKE_N(2) */ -+ PINCTRL_PIN_GROUP("pcie_wake", mt7981_pcie_wake), -+ /* @GPIO(36,37): I2C(2) */ -+ PINCTRL_PIN_GROUP("i2c0_2", mt7981_i2c0_2), -+ /* @GPIO(36,37): MDC_MDIO(1) */ -+ PINCTRL_PIN_GROUP("smi_mdc_mdio", mt7981_smi_mdc_mdio), -+ /* @GPIO(36,37): MDC_MDIO(3) */ -+ PINCTRL_PIN_GROUP("gbe_ext_mdc_mdio", mt7981_gbe_ext_mdc_mdio), -+ /* @GPIO(69,85): WF0_MODE1(1) */ -+ PINCTRL_PIN_GROUP("wf0_mode1", mt7981_wf0_mode1), -+ /* @GPIO(74,80): WF0_MODE3(3) */ -+ PINCTRL_PIN_GROUP("wf0_mode3", mt7981_wf0_mode3), -+ /* @GPIO(30): WF2G_LED(2) */ -+ PINCTRL_PIN_GROUP("wf2g_led0", mt7981_wf2g_led0), -+ /* @GPIO(34): WF2G_LED(1) */ -+ PINCTRL_PIN_GROUP("wf2g_led1", mt7981_wf2g_led1), -+ /* @GPIO(31): WF5G_LED(2) */ -+ PINCTRL_PIN_GROUP("wf5g_led0", mt7981_wf5g_led0), -+ /* @GPIO(35): WF5G_LED(1) */ -+ PINCTRL_PIN_GROUP("wf5g_led1", mt7981_wf5g_led1), -+ /* @GPIO(38): MT7531_INT(1) */ -+ PINCTRL_PIN_GROUP("mt7531_int", mt7981_mt7531_int), -+ /* @GPIO(14,15,26,17,18,19,20,21,22,23,24,25,34,35): ANT_SEL(1) */ -+ PINCTRL_PIN_GROUP("ant_sel", mt7981_ant_sel), -+}; -+ -+/* Joint those groups owning the same capability in user point of view which -+ * allows that people tend to use through the device tree. -+ */ -+static const char *mt7981_wa_aice_groups[] = { "wa_aice1", "wa_aice2", "wm_aice1_1", -+ "wa_aice3", "wm_aice1_2", }; -+static const char *mt7981_uart_groups[] = { "wm_uart_0", "uart2_0", -+ "net_wo0_uart_txd_0", "net_wo0_uart_txd_1", "net_wo0_uart_txd_2", -+ "uart1_0", "uart1_1", "uart2_1", "wm_aurt_1", "wm_aurt_2", "uart0", }; -+static const char *mt7981_dfd_groups[] = { "dfd", "dfd_ntrst", }; -+static const char *mt7981_wdt_groups[] = { "watchdog", "watchdog1", }; -+static const char *mt7981_pcie_groups[] = { "pcie_pereset", "pcie_clk", "pcie_wake", }; -+static const char *mt7981_jtag_groups[] = { "jtag", "wm_jtag_0", "wo0_jtag_0", -+ "wo0_jtag_1", "wm_jtag_1", }; -+static const char *mt7981_led_groups[] = { "gbe_led0", "gbe_led1", "wf2g_led0", -+ "wf2g_led1", "wf5g_led0", "wf5g_led1", }; -+static const char *mt7981_pta_groups[] = { "pta_ext_0", "pta_ext_1", }; -+static const char *mt7981_pwm_groups[] = { "pwm2", "pwm0_0", "pwm0_1", -+ "pwm1_0", "pwm1_1", }; -+static const char *mt7981_spi_groups[] = { "spi1_0", "spi0", "spi0_wp_hold", "spi1_1", "spi2", -+ "spi2_wp_hold", }; -+static const char *mt7981_i2c_groups[] = { "i2c0_0", "i2c0_1", "u2_phy_i2c", -+ "sgmii1_phy_i2c", "u3_phy_i2c", "sgmii0_phy_i2c", "i2c0_2", }; -+static const char *mt7981_pcm_groups[] = { "pcm", }; -+static const char *mt7981_udi_groups[] = { "udi", }; -+static const char *mt7981_usb_groups[] = { "drv_vbus", }; -+static const char *mt7981_flash_groups[] = { "emmc_45", "snfi", }; -+static const char *mt7981_ethernet_groups[] = { "smi_mdc_mdio", "gbe_ext_mdc_mdio", -+ "wf0_mode1", "wf0_mode3", "mt7531_int", }; -+static const char *mt7981_ant_groups[] = { "ant_sel", }; -+ -+static const struct function_desc mt7981_functions[] = { -+ {"wa_aice", mt7981_wa_aice_groups, ARRAY_SIZE(mt7981_wa_aice_groups)}, -+ {"dfd", mt7981_dfd_groups, ARRAY_SIZE(mt7981_dfd_groups)}, -+ {"jtag", mt7981_jtag_groups, ARRAY_SIZE(mt7981_jtag_groups)}, -+ {"pta", mt7981_pta_groups, ARRAY_SIZE(mt7981_pta_groups)}, -+ {"pcm", mt7981_pcm_groups, ARRAY_SIZE(mt7981_pcm_groups)}, -+ {"udi", mt7981_udi_groups, ARRAY_SIZE(mt7981_udi_groups)}, -+ {"usb", mt7981_usb_groups, ARRAY_SIZE(mt7981_usb_groups)}, -+ {"ant", mt7981_ant_groups, ARRAY_SIZE(mt7981_ant_groups)}, -+ {"eth", mt7981_ethernet_groups, ARRAY_SIZE(mt7981_ethernet_groups)}, -+ {"i2c", mt7981_i2c_groups, ARRAY_SIZE(mt7981_i2c_groups)}, -+ {"led", mt7981_led_groups, ARRAY_SIZE(mt7981_led_groups)}, -+ {"pwm", mt7981_pwm_groups, ARRAY_SIZE(mt7981_pwm_groups)}, -+ {"spi", mt7981_spi_groups, ARRAY_SIZE(mt7981_spi_groups)}, -+ {"uart", mt7981_uart_groups, ARRAY_SIZE(mt7981_uart_groups)}, -+ {"watchdog", mt7981_wdt_groups, ARRAY_SIZE(mt7981_wdt_groups)}, -+ {"flash", mt7981_flash_groups, ARRAY_SIZE(mt7981_flash_groups)}, -+ {"pcie", mt7981_pcie_groups, ARRAY_SIZE(mt7981_pcie_groups)}, -+}; -+ -+static const struct mtk_eint_hw mt7981_eint_hw = { -+ .port_mask = 7, -+ .ports = 7, -+ .ap_num = ARRAY_SIZE(mt7981_pins), -+ .db_cnt = 16, -+}; -+ -+static const char * const mt7981_pinctrl_register_base_names[] = { -+ "gpio", "iocfg_rt", "iocfg_rm", "iocfg_rb", -+ "iocfg_lb", "iocfg_bl", "iocfg_tm", "iocfg_tl", -+}; -+ -+static struct mtk_pin_soc mt7981_data = { -+ .reg_cal = mt7981_reg_cals, -+ .pins = mt7981_pins, -+ .npins = ARRAY_SIZE(mt7981_pins), -+ .grps = mt7981_groups, -+ .ngrps = ARRAY_SIZE(mt7981_groups), -+ .funcs = mt7981_functions, -+ .nfuncs = ARRAY_SIZE(mt7981_functions), -+ .eint_hw = &mt7981_eint_hw, -+ .gpio_m = 0, -+ .ies_present = false, -+ .base_names = mt7981_pinctrl_register_base_names, -+ .nbase_names = ARRAY_SIZE(mt7981_pinctrl_register_base_names), -+ .pull_type = mt7981_pull_type, -+ .bias_set_combo = mtk_pinconf_bias_set_combo, -+ .bias_get_combo = mtk_pinconf_bias_get_combo, -+ .drive_set = mtk_pinconf_drive_set_rev1, -+ .drive_get = mtk_pinconf_drive_get_rev1, -+ .adv_pull_get = mtk_pinconf_adv_pull_get, -+ .adv_pull_set = mtk_pinconf_adv_pull_set, -+}; -+ -+static const struct of_device_id mt7981_pinctrl_of_match[] = { -+ { .compatible = "mediatek,mt7981-pinctrl", }, -+ {} -+}; -+ -+static int mt7981_pinctrl_probe(struct platform_device *pdev) -+{ -+ return mtk_moore_pinctrl_probe(pdev, &mt7981_data); -+} -+ -+static struct platform_driver mt7981_pinctrl_driver = { -+ .driver = { -+ .name = "mt7981-pinctrl", -+ .of_match_table = mt7981_pinctrl_of_match, -+ }, -+ .probe = mt7981_pinctrl_probe, -+}; -+ -+static int __init mt7981_pinctrl_init(void) -+{ -+ return platform_driver_register(&mt7981_pinctrl_driver); -+} -+arch_initcall(mt7981_pinctrl_init); diff --git a/target/linux/mediatek/patches-6.1/216-v6.3-pinctrl-mediatek-add-missing-options-to-PINCTRL_MT79.patch b/target/linux/mediatek/patches-6.1/216-v6.3-pinctrl-mediatek-add-missing-options-to-PINCTRL_MT79.patch deleted file mode 100644 index 995e0dc7ed8..00000000000 --- a/target/linux/mediatek/patches-6.1/216-v6.3-pinctrl-mediatek-add-missing-options-to-PINCTRL_MT79.patch +++ /dev/null @@ -1,30 +0,0 @@ -From c0ad453e94e5c404efbcf668648d07eaa1a71ed7 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= -Date: Sat, 18 Feb 2023 09:51:06 +0300 -Subject: [PATCH] pinctrl: mediatek: add missing options to PINCTRL_MT7981 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -There are options missing from PINCTRL_MT7981 whilst being on every other -pin controller. Add them. - -Signed-off-by: Arınç ÃœNAL -Acked-by: Daniel Golle -Link: https://lore.kernel.org/r/20230218065108.8958-1-arinc.unal@arinc9.com -Signed-off-by: Linus Walleij ---- - drivers/pinctrl/mediatek/Kconfig | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/pinctrl/mediatek/Kconfig -+++ b/drivers/pinctrl/mediatek/Kconfig -@@ -130,6 +130,8 @@ config PINCTRL_MT7622 - config PINCTRL_MT7981 - bool "Mediatek MT7981 pin control" - depends on OF -+ depends on ARM64 || COMPILE_TEST -+ default ARM64 && ARCH_MEDIATEK - select PINCTRL_MTK_MOORE - - config PINCTRL_MT7986 diff --git a/target/linux/mediatek/patches-6.1/217-v6.5-pinctrl-mediatek-fix-pull_type-data-for-MT7981.patch b/target/linux/mediatek/patches-6.1/217-v6.5-pinctrl-mediatek-fix-pull_type-data-for-MT7981.patch deleted file mode 100644 index db2561695bf..00000000000 --- a/target/linux/mediatek/patches-6.1/217-v6.5-pinctrl-mediatek-fix-pull_type-data-for-MT7981.patch +++ /dev/null @@ -1,76 +0,0 @@ -From 8f6f16fe1553ce63edfb98a39ef9d4754a0c39bf Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Fri, 18 Aug 2023 04:02:35 +0100 -Subject: [PATCH] pinctrl: mediatek: fix pull_type data for MT7981 - -MediaTek has released pull_type data for MT7981 in their SDK. -Use it and set functions to configure pin bias. - -Fixes: 6c83b2d94fcc ("pinctrl: add mt7981 pinctrl driver") -Signed-off-by: Daniel Golle -Link: https://lore.kernel.org/r/7bcc8ead25dbfabc7f5a85d066224a926fbb4941.1692327317.git.daniel@makrotopia.org -Signed-off-by: Linus Walleij ---- - drivers/pinctrl/mediatek/pinctrl-mt7981.c | 44 +++++++---------------- - 1 file changed, 13 insertions(+), 31 deletions(-) - ---- a/drivers/pinctrl/mediatek/pinctrl-mt7981.c -+++ b/drivers/pinctrl/mediatek/pinctrl-mt7981.c -@@ -457,37 +457,15 @@ static const unsigned int mt7981_pull_ty - MTK_PULL_PUPD_R1R0_TYPE,/*34*/ MTK_PULL_PUPD_R1R0_TYPE,/*35*/ - MTK_PULL_PUPD_R1R0_TYPE,/*36*/ MTK_PULL_PUPD_R1R0_TYPE,/*37*/ - MTK_PULL_PUPD_R1R0_TYPE,/*38*/ MTK_PULL_PUPD_R1R0_TYPE,/*39*/ -- MTK_PULL_PUPD_R1R0_TYPE,/*40*/ MTK_PULL_PUPD_R1R0_TYPE,/*41*/ -- MTK_PULL_PUPD_R1R0_TYPE,/*42*/ MTK_PULL_PUPD_R1R0_TYPE,/*43*/ -- MTK_PULL_PUPD_R1R0_TYPE,/*44*/ MTK_PULL_PUPD_R1R0_TYPE,/*45*/ -- MTK_PULL_PUPD_R1R0_TYPE,/*46*/ MTK_PULL_PUPD_R1R0_TYPE,/*47*/ -- MTK_PULL_PUPD_R1R0_TYPE,/*48*/ MTK_PULL_PUPD_R1R0_TYPE,/*49*/ -- MTK_PULL_PUPD_R1R0_TYPE,/*50*/ MTK_PULL_PUPD_R1R0_TYPE,/*51*/ -- MTK_PULL_PUPD_R1R0_TYPE,/*52*/ MTK_PULL_PUPD_R1R0_TYPE,/*53*/ -- MTK_PULL_PUPD_R1R0_TYPE,/*54*/ MTK_PULL_PUPD_R1R0_TYPE,/*55*/ -- MTK_PULL_PUPD_R1R0_TYPE,/*56*/ MTK_PULL_PUPD_R1R0_TYPE,/*57*/ -- MTK_PULL_PUPD_R1R0_TYPE,/*58*/ MTK_PULL_PUPD_R1R0_TYPE,/*59*/ -- MTK_PULL_PUPD_R1R0_TYPE,/*60*/ MTK_PULL_PUPD_R1R0_TYPE,/*61*/ -- MTK_PULL_PUPD_R1R0_TYPE,/*62*/ MTK_PULL_PUPD_R1R0_TYPE,/*63*/ -- MTK_PULL_PUPD_R1R0_TYPE,/*64*/ MTK_PULL_PUPD_R1R0_TYPE,/*65*/ -- MTK_PULL_PUPD_R1R0_TYPE,/*66*/ MTK_PULL_PUPD_R1R0_TYPE,/*67*/ -- MTK_PULL_PUPD_R1R0_TYPE,/*68*/ MTK_PULL_PU_PD_TYPE,/*69*/ -- MTK_PULL_PU_PD_TYPE,/*70*/ MTK_PULL_PU_PD_TYPE,/*71*/ -- MTK_PULL_PU_PD_TYPE,/*72*/ MTK_PULL_PU_PD_TYPE,/*73*/ -- MTK_PULL_PU_PD_TYPE,/*74*/ MTK_PULL_PU_PD_TYPE,/*75*/ -- MTK_PULL_PU_PD_TYPE,/*76*/ MTK_PULL_PU_PD_TYPE,/*77*/ -- MTK_PULL_PU_PD_TYPE,/*78*/ MTK_PULL_PU_PD_TYPE,/*79*/ -- MTK_PULL_PU_PD_TYPE,/*80*/ MTK_PULL_PU_PD_TYPE,/*81*/ -- MTK_PULL_PU_PD_TYPE,/*82*/ MTK_PULL_PU_PD_TYPE,/*83*/ -- MTK_PULL_PU_PD_TYPE,/*84*/ MTK_PULL_PU_PD_TYPE,/*85*/ -- MTK_PULL_PU_PD_TYPE,/*86*/ MTK_PULL_PU_PD_TYPE,/*87*/ -- MTK_PULL_PU_PD_TYPE,/*88*/ MTK_PULL_PU_PD_TYPE,/*89*/ -- MTK_PULL_PU_PD_TYPE,/*90*/ MTK_PULL_PU_PD_TYPE,/*91*/ -- MTK_PULL_PU_PD_TYPE,/*92*/ MTK_PULL_PU_PD_TYPE,/*93*/ -- MTK_PULL_PU_PD_TYPE,/*94*/ MTK_PULL_PU_PD_TYPE,/*95*/ -- MTK_PULL_PU_PD_TYPE,/*96*/ MTK_PULL_PU_PD_TYPE,/*97*/ -- MTK_PULL_PU_PD_TYPE,/*98*/ MTK_PULL_PU_PD_TYPE,/*99*/ -- MTK_PULL_PU_PD_TYPE,/*100*/ -+ MTK_PULL_PU_PD_TYPE,/*40*/ MTK_PULL_PU_PD_TYPE,/*41*/ -+ MTK_PULL_PU_PD_TYPE,/*42*/ MTK_PULL_PU_PD_TYPE,/*43*/ -+ MTK_PULL_PU_PD_TYPE,/*44*/ MTK_PULL_PU_PD_TYPE,/*45*/ -+ MTK_PULL_PU_PD_TYPE,/*46*/ MTK_PULL_PU_PD_TYPE,/*47*/ -+ MTK_PULL_PU_PD_TYPE,/*48*/ MTK_PULL_PU_PD_TYPE,/*49*/ -+ MTK_PULL_PU_PD_TYPE,/*50*/ MTK_PULL_PU_PD_TYPE,/*51*/ -+ MTK_PULL_PU_PD_TYPE,/*52*/ MTK_PULL_PU_PD_TYPE,/*53*/ -+ MTK_PULL_PU_PD_TYPE,/*54*/ MTK_PULL_PU_PD_TYPE,/*55*/ -+ MTK_PULL_PU_PD_TYPE,/*56*/ - }; - - static const struct mtk_pin_reg_calc mt7981_reg_cals[] = { -@@ -1014,6 +992,10 @@ static struct mtk_pin_soc mt7981_data = - .ies_present = false, - .base_names = mt7981_pinctrl_register_base_names, - .nbase_names = ARRAY_SIZE(mt7981_pinctrl_register_base_names), -+ .bias_disable_set = mtk_pinconf_bias_disable_set, -+ .bias_disable_get = mtk_pinconf_bias_disable_get, -+ .bias_set = mtk_pinconf_bias_set, -+ .bias_get = mtk_pinconf_bias_get, - .pull_type = mt7981_pull_type, - .bias_set_combo = mtk_pinconf_bias_set_combo, - .bias_get_combo = mtk_pinconf_bias_get_combo, diff --git a/target/linux/mediatek/patches-6.1/218-pinctrl-mediatek-mt7981-add-additional-uart-groups.patch b/target/linux/mediatek/patches-6.1/218-pinctrl-mediatek-mt7981-add-additional-uart-groups.patch deleted file mode 100644 index d2f055836ba..00000000000 --- a/target/linux/mediatek/patches-6.1/218-pinctrl-mediatek-mt7981-add-additional-uart-groups.patch +++ /dev/null @@ -1,65 +0,0 @@ -From 11db447f257231e08065989100311df57b7f1f1c Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Sat, 26 Aug 2023 21:06:14 +0100 -Subject: [PATCH] pinctrl: mediatek: mt7981: add additional uart groups - -Add uart2_0_tx_rx (pin 4, 5) and uart1_2 (pins 9, 10) groups. - -Signed-off-by: Daniel Golle ---- - drivers/pinctrl/mediatek/pinctrl-mt7981.c | 16 +++++++++++++--- - 1 file changed, 13 insertions(+), 3 deletions(-) - ---- a/drivers/pinctrl/mediatek/pinctrl-mt7981.c -+++ b/drivers/pinctrl/mediatek/pinctrl-mt7981.c -@@ -611,6 +611,9 @@ static int mt7981_wo0_jtag_1_funcs[] = { - static int mt7981_uart2_0_pins[] = { 4, 5, 6, 7, }; - static int mt7981_uart2_0_funcs[] = { 3, 3, 3, 3, }; - -+static int mt7981_uart2_0_tx_rx_pins[] = { 4, 5, }; -+static int mt7981_uart2_0_tx_rx_funcs[] = { 3, 3, }; -+ - /* GBE_LED0 */ - static int mt7981_gbe_led0_pins[] = { 8, }; - static int mt7981_gbe_led0_funcs[] = { 3, }; -@@ -731,6 +734,9 @@ static int mt7981_uart1_0_funcs[] = { 4, - static int mt7981_uart1_1_pins[] = { 26, 27, 28, 29, }; - static int mt7981_uart1_1_funcs[] = { 2, 2, 2, 2, }; - -+static int mt7981_uart1_2_pins[] = { 9, 10, }; -+static int mt7981_uart1_2_funcs[] = { 2, 2, }; -+ - /* UART2 */ - static int mt7981_uart2_1_pins[] = { 22, 23, 24, 25, }; - static int mt7981_uart2_1_funcs[] = { 3, 3, 3, 3, }; -@@ -805,6 +811,8 @@ static const struct group_desc mt7981_gr - PINCTRL_PIN_GROUP("wo0_jtag_0", mt7981_wo0_jtag_0), - /* @GPIO(4,7) WM_JTAG(3) */ - PINCTRL_PIN_GROUP("uart2_0", mt7981_uart2_0), -+ /* @GPIO(4,5) WM_JTAG(4) */ -+ PINCTRL_PIN_GROUP("uart2_0_tx_rx", mt7981_uart2_0_tx_rx), - /* @GPIO(8) GBE_LED0(3) */ - PINCTRL_PIN_GROUP("gbe_led0", mt7981_gbe_led0), - /* @GPIO(4,6) PTA_EXT(4) */ -@@ -861,6 +869,8 @@ static const struct group_desc mt7981_gr - PINCTRL_PIN_GROUP("uart1_0", mt7981_uart1_0), - /* @GPIO(26,29): UART1(2) */ - PINCTRL_PIN_GROUP("uart1_1", mt7981_uart1_1), -+ /* @GPIO(9,10): UART1(2) */ -+ PINCTRL_PIN_GROUP("uart1_2", mt7981_uart1_2), - /* @GPIO(22,25): UART1(3) */ - PINCTRL_PIN_GROUP("uart2_1", mt7981_uart2_1), - /* @GPIO(22,24) PTA_EXT(4) */ -@@ -922,9 +932,9 @@ static const struct group_desc mt7981_gr - */ - static const char *mt7981_wa_aice_groups[] = { "wa_aice1", "wa_aice2", "wm_aice1_1", - "wa_aice3", "wm_aice1_2", }; --static const char *mt7981_uart_groups[] = { "wm_uart_0", "uart2_0", -- "net_wo0_uart_txd_0", "net_wo0_uart_txd_1", "net_wo0_uart_txd_2", -- "uart1_0", "uart1_1", "uart2_1", "wm_aurt_1", "wm_aurt_2", "uart0", }; -+static const char *mt7981_uart_groups[] = { "net_wo0_uart_txd_0", "net_wo0_uart_txd_1", -+ "net_wo0_uart_txd_2", "uart0", "uart1_0", "uart1_1", "uart1_2", "uart2_0", -+ "uart2_0_tx_rx", "uart2_1", "wm_uart_0", "wm_aurt_1", "wm_aurt_2", }; - static const char *mt7981_dfd_groups[] = { "dfd", "dfd_ntrst", }; - static const char *mt7981_wdt_groups[] = { "watchdog", "watchdog1", }; - static const char *mt7981_pcie_groups[] = { "pcie_pereset", "pcie_clk", "pcie_wake", }; diff --git a/target/linux/mediatek/patches-6.1/219-v6.6-pinctrl-mediatek-assign-functions-to-configure-pin-b.patch b/target/linux/mediatek/patches-6.1/219-v6.6-pinctrl-mediatek-assign-functions-to-configure-pin-b.patch deleted file mode 100644 index 7992a026774..00000000000 --- a/target/linux/mediatek/patches-6.1/219-v6.6-pinctrl-mediatek-assign-functions-to-configure-pin-b.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 0d8387fba9f151220e48dc3dcdc2335539708f13 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Fri, 18 Aug 2023 04:03:26 +0100 -Subject: [PATCH] pinctrl: mediatek: assign functions to configure pin bias on - MT7986 - -Assign bias_disable_get/set and bias_get/set functions to allow -configuring pin bias on MT7986. - -Fixes: 2c58d8dc9cd0 ("pinctrl: mediatek: add pull_type attribute for mediatek MT7986 SoC") -Signed-off-by: Daniel Golle -Link: https://lore.kernel.org/r/47f72372354312a839b9337e09476aadcc206e8b.1692327317.git.daniel@makrotopia.org -Signed-off-by: Linus Walleij ---- - drivers/pinctrl/mediatek/pinctrl-mt7986.c | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/drivers/pinctrl/mediatek/pinctrl-mt7986.c -+++ b/drivers/pinctrl/mediatek/pinctrl-mt7986.c -@@ -922,6 +922,10 @@ static struct mtk_pin_soc mt7986a_data = - .ies_present = false, - .base_names = mt7986_pinctrl_register_base_names, - .nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names), -+ .bias_disable_set = mtk_pinconf_bias_disable_set, -+ .bias_disable_get = mtk_pinconf_bias_disable_get, -+ .bias_set = mtk_pinconf_bias_set, -+ .bias_get = mtk_pinconf_bias_get, - .pull_type = mt7986_pull_type, - .bias_set_combo = mtk_pinconf_bias_set_combo, - .bias_get_combo = mtk_pinconf_bias_get_combo, -@@ -944,6 +948,10 @@ static struct mtk_pin_soc mt7986b_data = - .ies_present = false, - .base_names = mt7986_pinctrl_register_base_names, - .nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names), -+ .bias_disable_set = mtk_pinconf_bias_disable_set, -+ .bias_disable_get = mtk_pinconf_bias_disable_get, -+ .bias_set = mtk_pinconf_bias_set, -+ .bias_get = mtk_pinconf_bias_get, - .pull_type = mt7986_pull_type, - .bias_set_combo = mtk_pinconf_bias_set_combo, - .bias_get_combo = mtk_pinconf_bias_get_combo, diff --git a/target/linux/mediatek/patches-6.1/221-v6.3-clk-mediatek-cpumux-Propagate-struct-device-where-po.patch b/target/linux/mediatek/patches-6.1/221-v6.3-clk-mediatek-cpumux-Propagate-struct-device-where-po.patch deleted file mode 100644 index c7f37718afe..00000000000 --- a/target/linux/mediatek/patches-6.1/221-v6.3-clk-mediatek-cpumux-Propagate-struct-device-where-po.patch +++ /dev/null @@ -1,140 +0,0 @@ -From b888303c7d23d7bd0c8667cfc657669e5d153fea Mon Sep 17 00:00:00 2001 -From: AngeloGioacchino Del Regno -Date: Fri, 20 Jan 2023 10:20:34 +0100 -Subject: [PATCH 02/15] clk: mediatek: cpumux: Propagate struct device where - possible - -Take a pointer to a struct device in mtk_clk_register_cpumuxes() and -propagate the same to mtk_clk_register_cpumux() => clk_hw_register(). -Even though runtime pm is unlikely to be used with CPU muxes, this -helps with code consistency and possibly opens to commonization of -some mtk_clk_register_(x) functions. - -Signed-off-by: AngeloGioacchino Del Regno -Reviewed-by: Chen-Yu Tsai -Reviewed-by: Markus Schneider-Pargmann -Tested-by: Miles Chen -Link: https://lore.kernel.org/r/20230120092053.182923-5-angelogioacchino.delregno@collabora.com -Tested-by: Mingming Su -Signed-off-by: Stephen Boyd ---- - drivers/clk/mediatek/clk-cpumux.c | 8 ++++---- - drivers/clk/mediatek/clk-cpumux.h | 2 +- - drivers/clk/mediatek/clk-mt2701.c | 2 +- - drivers/clk/mediatek/clk-mt6795-infracfg.c | 3 ++- - drivers/clk/mediatek/clk-mt7622.c | 4 ++-- - drivers/clk/mediatek/clk-mt7629.c | 4 ++-- - drivers/clk/mediatek/clk-mt8173.c | 4 ++-- - 7 files changed, 14 insertions(+), 13 deletions(-) - ---- a/drivers/clk/mediatek/clk-cpumux.c -+++ b/drivers/clk/mediatek/clk-cpumux.c -@@ -58,7 +58,7 @@ static const struct clk_ops clk_cpumux_o - }; - - static struct clk_hw * --mtk_clk_register_cpumux(const struct mtk_composite *mux, -+mtk_clk_register_cpumux(struct device *dev, const struct mtk_composite *mux, - struct regmap *regmap) - { - struct mtk_clk_cpumux *cpumux; -@@ -81,7 +81,7 @@ mtk_clk_register_cpumux(const struct mtk - cpumux->regmap = regmap; - cpumux->hw.init = &init; - -- ret = clk_hw_register(NULL, &cpumux->hw); -+ ret = clk_hw_register(dev, &cpumux->hw); - if (ret) { - kfree(cpumux); - return ERR_PTR(ret); -@@ -102,7 +102,7 @@ static void mtk_clk_unregister_cpumux(st - kfree(cpumux); - } - --int mtk_clk_register_cpumuxes(struct device_node *node, -+int mtk_clk_register_cpumuxes(struct device *dev, struct device_node *node, - const struct mtk_composite *clks, int num, - struct clk_hw_onecell_data *clk_data) - { -@@ -125,7 +125,7 @@ int mtk_clk_register_cpumuxes(struct dev - continue; - } - -- hw = mtk_clk_register_cpumux(mux, regmap); -+ hw = mtk_clk_register_cpumux(dev, mux, regmap); - if (IS_ERR(hw)) { - pr_err("Failed to register clk %s: %pe\n", mux->name, - hw); ---- a/drivers/clk/mediatek/clk-cpumux.h -+++ b/drivers/clk/mediatek/clk-cpumux.h -@@ -11,7 +11,7 @@ struct clk_hw_onecell_data; - struct device_node; - struct mtk_composite; - --int mtk_clk_register_cpumuxes(struct device_node *node, -+int mtk_clk_register_cpumuxes(struct device *dev, struct device_node *node, - const struct mtk_composite *clks, int num, - struct clk_hw_onecell_data *clk_data); - ---- a/drivers/clk/mediatek/clk-mt2701.c -+++ b/drivers/clk/mediatek/clk-mt2701.c -@@ -762,7 +762,7 @@ static void __init mtk_infrasys_init_ear - mtk_clk_register_factors(infra_fixed_divs, ARRAY_SIZE(infra_fixed_divs), - infra_clk_data); - -- mtk_clk_register_cpumuxes(node, cpu_muxes, ARRAY_SIZE(cpu_muxes), -+ mtk_clk_register_cpumuxes(NULL, node, cpu_muxes, ARRAY_SIZE(cpu_muxes), - infra_clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, ---- a/drivers/clk/mediatek/clk-mt6795-infracfg.c -+++ b/drivers/clk/mediatek/clk-mt6795-infracfg.c -@@ -106,7 +106,8 @@ static int clk_mt6795_infracfg_probe(str - if (ret) - goto free_clk_data; - -- ret = mtk_clk_register_cpumuxes(node, cpu_muxes, ARRAY_SIZE(cpu_muxes), clk_data); -+ ret = mtk_clk_register_cpumuxes(&pdev->dev, node, cpu_muxes, -+ ARRAY_SIZE(cpu_muxes), clk_data); - if (ret) - goto unregister_gates; - ---- a/drivers/clk/mediatek/clk-mt7622.c -+++ b/drivers/clk/mediatek/clk-mt7622.c -@@ -639,8 +639,8 @@ static int mtk_infrasys_init(struct plat - mtk_clk_register_gates(&pdev->dev, node, infra_clks, - ARRAY_SIZE(infra_clks), clk_data); - -- mtk_clk_register_cpumuxes(node, infra_muxes, ARRAY_SIZE(infra_muxes), -- clk_data); -+ mtk_clk_register_cpumuxes(&pdev->dev, node, infra_muxes, -+ ARRAY_SIZE(infra_muxes), clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, - clk_data); ---- a/drivers/clk/mediatek/clk-mt7629.c -+++ b/drivers/clk/mediatek/clk-mt7629.c -@@ -589,8 +589,8 @@ static int mtk_infrasys_init(struct plat - mtk_clk_register_gates(&pdev->dev, node, infra_clks, - ARRAY_SIZE(infra_clks), clk_data); - -- mtk_clk_register_cpumuxes(node, infra_muxes, ARRAY_SIZE(infra_muxes), -- clk_data); -+ mtk_clk_register_cpumuxes(&pdev->dev, node, infra_muxes, -+ ARRAY_SIZE(infra_muxes), clk_data); - - return of_clk_add_hw_provider(node, of_clk_hw_onecell_get, - clk_data); ---- a/drivers/clk/mediatek/clk-mt8173.c -+++ b/drivers/clk/mediatek/clk-mt8173.c -@@ -893,8 +893,8 @@ static void __init mtk_infrasys_init(str - ARRAY_SIZE(infra_clks), clk_data); - mtk_clk_register_factors(infra_divs, ARRAY_SIZE(infra_divs), clk_data); - -- mtk_clk_register_cpumuxes(node, cpu_muxes, ARRAY_SIZE(cpu_muxes), -- clk_data); -+ mtk_clk_register_cpumuxes(NULL, node, cpu_muxes, -+ ARRAY_SIZE(cpu_muxes), clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - if (r) diff --git a/target/linux/mediatek/patches-6.1/224-v6.3-clk-mediatek-clk-mtk-Add-dummy-clock-ops.patch b/target/linux/mediatek/patches-6.1/224-v6.3-clk-mediatek-clk-mtk-Add-dummy-clock-ops.patch deleted file mode 100644 index c7de44fcf3f..00000000000 --- a/target/linux/mediatek/patches-6.1/224-v6.3-clk-mediatek-clk-mtk-Add-dummy-clock-ops.patch +++ /dev/null @@ -1,74 +0,0 @@ -From b8eb1081d267708ba976525a1fe2162901b34f3a Mon Sep 17 00:00:00 2001 -From: AngeloGioacchino Del Regno -Date: Fri, 20 Jan 2023 10:20:37 +0100 -Subject: [PATCH] clk: mediatek: clk-mtk: Add dummy clock ops - -In order to migrate some (few) old clock drivers to the common -mtk_clk_simple_probe() function, add dummy clock ops to be able -to insert a dummy clock with ID 0 at the beginning of the list. - -Signed-off-by: AngeloGioacchino Del Regno -Reviewed-by: Miles Chen -Reviewed-by: Chen-Yu Tsai -Tested-by: Miles Chen -Link: https://lore.kernel.org/r/20230120092053.182923-8-angelogioacchino.delregno@collabora.com -Tested-by: Mingming Su -Signed-off-by: Stephen Boyd ---- - drivers/clk/mediatek/clk-mtk.c | 16 ++++++++++++++++ - drivers/clk/mediatek/clk-mtk.h | 19 +++++++++++++++++++ - 2 files changed, 35 insertions(+) - ---- a/drivers/clk/mediatek/clk-mtk.c -+++ b/drivers/clk/mediatek/clk-mtk.c -@@ -21,6 +21,22 @@ - #include "clk-gate.h" - #include "clk-mux.h" - -+const struct mtk_gate_regs cg_regs_dummy = { 0, 0, 0 }; -+EXPORT_SYMBOL_GPL(cg_regs_dummy); -+ -+static int mtk_clk_dummy_enable(struct clk_hw *hw) -+{ -+ return 0; -+} -+ -+static void mtk_clk_dummy_disable(struct clk_hw *hw) { } -+ -+const struct clk_ops mtk_clk_dummy_ops = { -+ .enable = mtk_clk_dummy_enable, -+ .disable = mtk_clk_dummy_disable, -+}; -+EXPORT_SYMBOL_GPL(mtk_clk_dummy_ops); -+ - static void mtk_init_clk_data(struct clk_hw_onecell_data *clk_data, - unsigned int clk_num) - { ---- a/drivers/clk/mediatek/clk-mtk.h -+++ b/drivers/clk/mediatek/clk-mtk.h -@@ -22,6 +22,25 @@ - - struct platform_device; - -+/* -+ * We need the clock IDs to start from zero but to maintain devicetree -+ * backwards compatibility we can't change bindings to start from zero. -+ * Only a few platforms are affected, so we solve issues given by the -+ * commonized MTK clocks probe function(s) by adding a dummy clock at -+ * the beginning where needed. -+ */ -+#define CLK_DUMMY 0 -+ -+extern const struct clk_ops mtk_clk_dummy_ops; -+extern const struct mtk_gate_regs cg_regs_dummy; -+ -+#define GATE_DUMMY(_id, _name) { \ -+ .id = _id, \ -+ .name = _name, \ -+ .regs = &cg_regs_dummy, \ -+ .ops = &mtk_clk_dummy_ops, \ -+ } -+ - struct mtk_fixed_clk { - int id; - const char *name; diff --git a/target/linux/mediatek/patches-6.1/225-v6.3-clk-mediatek-Switch-to-mtk_clk_simple_probe-where-po.patch b/target/linux/mediatek/patches-6.1/225-v6.3-clk-mediatek-Switch-to-mtk_clk_simple_probe-where-po.patch deleted file mode 100644 index becfcd0ed81..00000000000 --- a/target/linux/mediatek/patches-6.1/225-v6.3-clk-mediatek-Switch-to-mtk_clk_simple_probe-where-po.patch +++ /dev/null @@ -1,790 +0,0 @@ -From c26e28015b74af73e0b299f6ad3ff22931e600b4 Mon Sep 17 00:00:00 2001 -From: AngeloGioacchino Del Regno -Date: Fri, 20 Jan 2023 10:20:41 +0100 -Subject: [PATCH 05/15] clk: mediatek: Switch to mtk_clk_simple_probe() where - possible - -mtk_clk_simple_probe() is a function that registers mtk gate clocks -and, if reset data is present, a reset controller and across all of -the MTK clock drivers, such a function is duplicated many times: -switch to the common mtk_clk_simple_probe() function for all of the -clock drivers that are registering as platform drivers. - -Signed-off-by: AngeloGioacchino Del Regno -Reviewed-by: Miles Chen -Tested-by: Miles Chen -Link: https://lore.kernel.org/r/20230120092053.182923-12-angelogioacchino.delregno@collabora.com -Tested-by: Mingming Su -Signed-off-by: Stephen Boyd - -[daniel@makrotopia.org: removed parts not relevant for OpenWrt] ---- - drivers/clk/mediatek/clk-mt2701-aud.c | 31 ++++++---- - drivers/clk/mediatek/clk-mt2701-eth.c | 36 ++++-------- - drivers/clk/mediatek/clk-mt2701-g3d.c | 56 ++++-------------- - drivers/clk/mediatek/clk-mt2701-hif.c | 38 ++++-------- - drivers/clk/mediatek/clk-mt2712.c | 83 ++++++++++---------------- - drivers/clk/mediatek/clk-mt7622-aud.c | 54 ++++++----------- - drivers/clk/mediatek/clk-mt7622-eth.c | 82 +++++--------------------- - drivers/clk/mediatek/clk-mt7622-hif.c | 85 +++++---------------------- - drivers/clk/mediatek/clk-mt7629-hif.c | 85 +++++---------------------- - 9 files changed, 144 insertions(+), 406 deletions(-) - ---- a/drivers/clk/mediatek/clk-mt2701-aud.c -+++ b/drivers/clk/mediatek/clk-mt2701-aud.c -@@ -52,6 +52,7 @@ static const struct mtk_gate_regs audio3 - }; - - static const struct mtk_gate audio_clks[] = { -+ GATE_DUMMY(CLK_DUMMY, "aud_dummy"), - /* AUDIO0 */ - GATE_AUDIO0(CLK_AUD_AFE, "audio_afe", "aud_intbus_sel", 2), - GATE_AUDIO0(CLK_AUD_HDMI, "audio_hdmi", "audpll_sel", 20), -@@ -114,29 +115,27 @@ static const struct mtk_gate audio_clks[ - GATE_AUDIO3(CLK_AUD_MEM_ASRC5, "audio_mem_asrc5", "asm_h_sel", 14), - }; - -+static const struct mtk_clk_desc audio_desc = { -+ .clks = audio_clks, -+ .num_clks = ARRAY_SIZE(audio_clks), -+}; -+ - static const struct of_device_id of_match_clk_mt2701_aud[] = { -- { .compatible = "mediatek,mt2701-audsys", }, -- {} -+ { .compatible = "mediatek,mt2701-audsys", .data = &audio_desc }, -+ { /* sentinel */ } - }; - - static int clk_mt2701_aud_probe(struct platform_device *pdev) - { -- struct clk_hw_onecell_data *clk_data; -- struct device_node *node = pdev->dev.of_node; - int r; - -- clk_data = mtk_alloc_clk_data(CLK_AUD_NR); -- -- mtk_clk_register_gates(&pdev->dev, node, audio_clks, -- ARRAY_SIZE(audio_clks), clk_data); -- -- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); -+ r = mtk_clk_simple_probe(pdev); - if (r) { - dev_err(&pdev->dev, - "could not register clock provider: %s: %d\n", - pdev->name, r); - -- goto err_clk_provider; -+ return r; - } - - r = devm_of_platform_populate(&pdev->dev); -@@ -146,13 +145,19 @@ static int clk_mt2701_aud_probe(struct p - return 0; - - err_plat_populate: -- of_clk_del_provider(node); --err_clk_provider: -+ mtk_clk_simple_remove(pdev); - return r; - } - -+static int clk_mt2701_aud_remove(struct platform_device *pdev) -+{ -+ of_platform_depopulate(&pdev->dev); -+ return mtk_clk_simple_remove(pdev); -+} -+ - static struct platform_driver clk_mt2701_aud_drv = { - .probe = clk_mt2701_aud_probe, -+ .remove = clk_mt2701_aud_remove, - .driver = { - .name = "clk-mt2701-aud", - .of_match_table = of_match_clk_mt2701_aud, ---- a/drivers/clk/mediatek/clk-mt2701-eth.c -+++ b/drivers/clk/mediatek/clk-mt2701-eth.c -@@ -20,6 +20,7 @@ static const struct mtk_gate_regs eth_cg - GATE_MTK(_id, _name, _parent, ð_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv) - - static const struct mtk_gate eth_clks[] = { -+ GATE_DUMMY(CLK_DUMMY, "eth_dummy"), - GATE_ETH(CLK_ETHSYS_HSDMA, "hsdma_clk", "ethif_sel", 5), - GATE_ETH(CLK_ETHSYS_ESW, "esw_clk", "ethpll_500m_ck", 6), - GATE_ETH(CLK_ETHSYS_GP2, "gp2_clk", "trgpll", 7), -@@ -38,35 +39,20 @@ static const struct mtk_clk_rst_desc clk - .rst_bank_nr = ARRAY_SIZE(rst_ofs), - }; - --static const struct of_device_id of_match_clk_mt2701_eth[] = { -- { .compatible = "mediatek,mt2701-ethsys", }, -- {} -+static const struct mtk_clk_desc eth_desc = { -+ .clks = eth_clks, -+ .num_clks = ARRAY_SIZE(eth_clks), -+ .rst_desc = &clk_rst_desc, - }; - --static int clk_mt2701_eth_probe(struct platform_device *pdev) --{ -- struct clk_hw_onecell_data *clk_data; -- int r; -- struct device_node *node = pdev->dev.of_node; -- -- clk_data = mtk_alloc_clk_data(CLK_ETHSYS_NR); -- -- mtk_clk_register_gates(&pdev->dev, node, eth_clks, -- ARRAY_SIZE(eth_clks), clk_data); -- -- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); -- if (r) -- dev_err(&pdev->dev, -- "could not register clock provider: %s: %d\n", -- pdev->name, r); -- -- mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc); -- -- return r; --} -+static const struct of_device_id of_match_clk_mt2701_eth[] = { -+ { .compatible = "mediatek,mt2701-ethsys", .data = ð_desc }, -+ { /* sentinel */ } -+}; - - static struct platform_driver clk_mt2701_eth_drv = { -- .probe = clk_mt2701_eth_probe, -+ .probe = mtk_clk_simple_probe, -+ .remove = mtk_clk_simple_remove, - .driver = { - .name = "clk-mt2701-eth", - .of_match_table = of_match_clk_mt2701_eth, ---- a/drivers/clk/mediatek/clk-mt2701-g3d.c -+++ b/drivers/clk/mediatek/clk-mt2701-g3d.c -@@ -26,6 +26,7 @@ static const struct mtk_gate_regs g3d_cg - }; - - static const struct mtk_gate g3d_clks[] = { -+ GATE_DUMMY(CLK_DUMMY, "g3d_dummy"), - GATE_G3D(CLK_G3DSYS_CORE, "g3d_core", "mfg_sel", 0), - }; - -@@ -37,57 +38,20 @@ static const struct mtk_clk_rst_desc clk - .rst_bank_nr = ARRAY_SIZE(rst_ofs), - }; - --static int clk_mt2701_g3dsys_init(struct platform_device *pdev) --{ -- struct clk_hw_onecell_data *clk_data; -- struct device_node *node = pdev->dev.of_node; -- int r; -- -- clk_data = mtk_alloc_clk_data(CLK_G3DSYS_NR); -- -- mtk_clk_register_gates(&pdev->dev, node, g3d_clks, ARRAY_SIZE(g3d_clks), -- clk_data); -- -- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); -- if (r) -- dev_err(&pdev->dev, -- "could not register clock provider: %s: %d\n", -- pdev->name, r); -- -- mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc); -- -- return r; --} -+static const struct mtk_clk_desc g3d_desc = { -+ .clks = g3d_clks, -+ .num_clks = ARRAY_SIZE(g3d_clks), -+ .rst_desc = &clk_rst_desc, -+}; - - static const struct of_device_id of_match_clk_mt2701_g3d[] = { -- { -- .compatible = "mediatek,mt2701-g3dsys", -- .data = clk_mt2701_g3dsys_init, -- }, { -- /* sentinel */ -- } -+ { .compatible = "mediatek,mt2701-g3dsys", .data = &g3d_desc }, -+ { /* sentinel */ } - }; - --static int clk_mt2701_g3d_probe(struct platform_device *pdev) --{ -- int (*clk_init)(struct platform_device *); -- int r; -- -- clk_init = of_device_get_match_data(&pdev->dev); -- if (!clk_init) -- return -EINVAL; -- -- r = clk_init(pdev); -- if (r) -- dev_err(&pdev->dev, -- "could not register clock provider: %s: %d\n", -- pdev->name, r); -- -- return r; --} -- - static struct platform_driver clk_mt2701_g3d_drv = { -- .probe = clk_mt2701_g3d_probe, -+ .probe = mtk_clk_simple_probe, -+ .remove = mtk_clk_simple_remove, - .driver = { - .name = "clk-mt2701-g3d", - .of_match_table = of_match_clk_mt2701_g3d, ---- a/drivers/clk/mediatek/clk-mt2701-hif.c -+++ b/drivers/clk/mediatek/clk-mt2701-hif.c -@@ -20,6 +20,7 @@ static const struct mtk_gate_regs hif_cg - GATE_MTK(_id, _name, _parent, &hif_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv) - - static const struct mtk_gate hif_clks[] = { -+ GATE_DUMMY(CLK_DUMMY, "hif_dummy"), - GATE_HIF(CLK_HIFSYS_USB0PHY, "usb0_phy_clk", "ethpll_500m_ck", 21), - GATE_HIF(CLK_HIFSYS_USB1PHY, "usb1_phy_clk", "ethpll_500m_ck", 22), - GATE_HIF(CLK_HIFSYS_PCIE0, "pcie0_clk", "ethpll_500m_ck", 24), -@@ -35,37 +36,20 @@ static const struct mtk_clk_rst_desc clk - .rst_bank_nr = ARRAY_SIZE(rst_ofs), - }; - --static const struct of_device_id of_match_clk_mt2701_hif[] = { -- { .compatible = "mediatek,mt2701-hifsys", }, -- {} -+static const struct mtk_clk_desc hif_desc = { -+ .clks = hif_clks, -+ .num_clks = ARRAY_SIZE(hif_clks), -+ .rst_desc = &clk_rst_desc, - }; - --static int clk_mt2701_hif_probe(struct platform_device *pdev) --{ -- struct clk_hw_onecell_data *clk_data; -- int r; -- struct device_node *node = pdev->dev.of_node; -- -- clk_data = mtk_alloc_clk_data(CLK_HIFSYS_NR); -- -- mtk_clk_register_gates(&pdev->dev, node, hif_clks, -- ARRAY_SIZE(hif_clks), clk_data); -- -- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); -- if (r) { -- dev_err(&pdev->dev, -- "could not register clock provider: %s: %d\n", -- pdev->name, r); -- return r; -- } -- -- mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc); -- -- return 0; --} -+static const struct of_device_id of_match_clk_mt2701_hif[] = { -+ { .compatible = "mediatek,mt2701-hifsys", .data = &hif_desc }, -+ { /* sentinel */ } -+}; - - static struct platform_driver clk_mt2701_hif_drv = { -- .probe = clk_mt2701_hif_probe, -+ .probe = mtk_clk_simple_probe, -+ .remove = mtk_clk_simple_remove, - .driver = { - .name = "clk-mt2701-hif", - .of_match_table = of_match_clk_mt2701_hif, ---- a/drivers/clk/mediatek/clk-mt2712.c -+++ b/drivers/clk/mediatek/clk-mt2712.c -@@ -1337,50 +1337,6 @@ static int clk_mt2712_top_probe(struct p - return r; - } - --static int clk_mt2712_infra_probe(struct platform_device *pdev) --{ -- struct clk_hw_onecell_data *clk_data; -- int r; -- struct device_node *node = pdev->dev.of_node; -- -- clk_data = mtk_alloc_clk_data(CLK_INFRA_NR_CLK); -- -- mtk_clk_register_gates(&pdev->dev, node, infra_clks, -- ARRAY_SIZE(infra_clks), clk_data); -- -- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); -- -- if (r != 0) -- pr_err("%s(): could not register clock provider: %d\n", -- __func__, r); -- -- mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc[0]); -- -- return r; --} -- --static int clk_mt2712_peri_probe(struct platform_device *pdev) --{ -- struct clk_hw_onecell_data *clk_data; -- int r; -- struct device_node *node = pdev->dev.of_node; -- -- clk_data = mtk_alloc_clk_data(CLK_PERI_NR_CLK); -- -- mtk_clk_register_gates(&pdev->dev, node, peri_clks, -- ARRAY_SIZE(peri_clks), clk_data); -- -- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); -- -- if (r != 0) -- pr_err("%s(): could not register clock provider: %d\n", -- __func__, r); -- -- mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc[1]); -- -- return r; --} -- - static int clk_mt2712_mcu_probe(struct platform_device *pdev) - { - struct clk_hw_onecell_data *clk_data; -@@ -1419,12 +1375,6 @@ static const struct of_device_id of_matc - .compatible = "mediatek,mt2712-topckgen", - .data = clk_mt2712_top_probe, - }, { -- .compatible = "mediatek,mt2712-infracfg", -- .data = clk_mt2712_infra_probe, -- }, { -- .compatible = "mediatek,mt2712-pericfg", -- .data = clk_mt2712_peri_probe, -- }, { - .compatible = "mediatek,mt2712-mcucfg", - .data = clk_mt2712_mcu_probe, - }, { -@@ -1450,6 +1400,33 @@ static int clk_mt2712_probe(struct platf - return r; - } - -+static const struct mtk_clk_desc infra_desc = { -+ .clks = infra_clks, -+ .num_clks = ARRAY_SIZE(infra_clks), -+ .rst_desc = &clk_rst_desc[0], -+}; -+ -+static const struct mtk_clk_desc peri_desc = { -+ .clks = peri_clks, -+ .num_clks = ARRAY_SIZE(peri_clks), -+ .rst_desc = &clk_rst_desc[1], -+}; -+ -+static const struct of_device_id of_match_clk_mt2712_simple[] = { -+ { .compatible = "mediatek,mt2712-infracfg", .data = &infra_desc }, -+ { .compatible = "mediatek,mt2712-pericfg", .data = &peri_desc, }, -+ { /* sentinel */ } -+}; -+ -+static struct platform_driver clk_mt2712_simple_drv = { -+ .probe = mtk_clk_simple_probe, -+ .remove = mtk_clk_simple_remove, -+ .driver = { -+ .name = "clk-mt2712-simple", -+ .of_match_table = of_match_clk_mt2712_simple, -+ }, -+}; -+ - static struct platform_driver clk_mt2712_drv = { - .probe = clk_mt2712_probe, - .driver = { -@@ -1460,7 +1437,11 @@ static struct platform_driver clk_mt2712 - - static int __init clk_mt2712_init(void) - { -- return platform_driver_register(&clk_mt2712_drv); -+ int ret = platform_driver_register(&clk_mt2712_drv); -+ -+ if (ret) -+ return ret; -+ return platform_driver_register(&clk_mt2712_simple_drv); - } - - arch_initcall(clk_mt2712_init); ---- a/drivers/clk/mediatek/clk-mt7622-aud.c -+++ b/drivers/clk/mediatek/clk-mt7622-aud.c -@@ -106,24 +106,22 @@ static const struct mtk_gate audio_clks[ - GATE_AUDIO3(CLK_AUDIO_MEM_ASRC5, "audio_mem_asrc5", "asm_h_sel", 14), - }; - --static int clk_mt7622_audiosys_init(struct platform_device *pdev) -+static const struct mtk_clk_desc audio_desc = { -+ .clks = audio_clks, -+ .num_clks = ARRAY_SIZE(audio_clks), -+}; -+ -+static int clk_mt7622_aud_probe(struct platform_device *pdev) - { -- struct clk_hw_onecell_data *clk_data; -- struct device_node *node = pdev->dev.of_node; - int r; - -- clk_data = mtk_alloc_clk_data(CLK_AUDIO_NR_CLK); -- -- mtk_clk_register_gates(&pdev->dev, node, audio_clks, -- ARRAY_SIZE(audio_clks), clk_data); -- -- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); -+ r = mtk_clk_simple_probe(pdev); - if (r) { - dev_err(&pdev->dev, - "could not register clock provider: %s: %d\n", - pdev->name, r); - -- goto err_clk_provider; -+ return r; - } - - r = devm_of_platform_populate(&pdev->dev); -@@ -133,40 +131,24 @@ static int clk_mt7622_audiosys_init(stru - return 0; - - err_plat_populate: -- of_clk_del_provider(node); --err_clk_provider: -+ mtk_clk_simple_remove(pdev); - return r; - } - --static const struct of_device_id of_match_clk_mt7622_aud[] = { -- { -- .compatible = "mediatek,mt7622-audsys", -- .data = clk_mt7622_audiosys_init, -- }, { -- /* sentinel */ -- } --}; -- --static int clk_mt7622_aud_probe(struct platform_device *pdev) -+static int clk_mt7622_aud_remove(struct platform_device *pdev) - { -- int (*clk_init)(struct platform_device *); -- int r; -- -- clk_init = of_device_get_match_data(&pdev->dev); -- if (!clk_init) -- return -EINVAL; -- -- r = clk_init(pdev); -- if (r) -- dev_err(&pdev->dev, -- "could not register clock provider: %s: %d\n", -- pdev->name, r); -- -- return r; -+ of_platform_depopulate(&pdev->dev); -+ return mtk_clk_simple_remove(pdev); - } - -+static const struct of_device_id of_match_clk_mt7622_aud[] = { -+ { .compatible = "mediatek,mt7622-audsys", .data = &audio_desc }, -+ { /* sentinel */ } -+}; -+ - static struct platform_driver clk_mt7622_aud_drv = { - .probe = clk_mt7622_aud_probe, -+ .remove = clk_mt7622_aud_remove, - .driver = { - .name = "clk-mt7622-aud", - .of_match_table = of_match_clk_mt7622_aud, ---- a/drivers/clk/mediatek/clk-mt7622-eth.c -+++ b/drivers/clk/mediatek/clk-mt7622-eth.c -@@ -61,80 +61,26 @@ static const struct mtk_clk_rst_desc clk - .rst_bank_nr = ARRAY_SIZE(rst_ofs), - }; - --static int clk_mt7622_ethsys_init(struct platform_device *pdev) --{ -- struct clk_hw_onecell_data *clk_data; -- struct device_node *node = pdev->dev.of_node; -- int r; -- -- clk_data = mtk_alloc_clk_data(CLK_ETH_NR_CLK); -- -- mtk_clk_register_gates(&pdev->dev, node, eth_clks, -- ARRAY_SIZE(eth_clks), clk_data); -- -- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); -- if (r) -- dev_err(&pdev->dev, -- "could not register clock provider: %s: %d\n", -- pdev->name, r); -- -- mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc); -- -- return r; --} -- --static int clk_mt7622_sgmiisys_init(struct platform_device *pdev) --{ -- struct clk_hw_onecell_data *clk_data; -- struct device_node *node = pdev->dev.of_node; -- int r; -- -- clk_data = mtk_alloc_clk_data(CLK_SGMII_NR_CLK); -- -- mtk_clk_register_gates(&pdev->dev, node, sgmii_clks, -- ARRAY_SIZE(sgmii_clks), clk_data); -- -- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); -- if (r) -- dev_err(&pdev->dev, -- "could not register clock provider: %s: %d\n", -- pdev->name, r); -+static const struct mtk_clk_desc eth_desc = { -+ .clks = eth_clks, -+ .num_clks = ARRAY_SIZE(eth_clks), -+ .rst_desc = &clk_rst_desc, -+}; - -- return r; --} -+static const struct mtk_clk_desc sgmii_desc = { -+ .clks = sgmii_clks, -+ .num_clks = ARRAY_SIZE(sgmii_clks), -+}; - - static const struct of_device_id of_match_clk_mt7622_eth[] = { -- { -- .compatible = "mediatek,mt7622-ethsys", -- .data = clk_mt7622_ethsys_init, -- }, { -- .compatible = "mediatek,mt7622-sgmiisys", -- .data = clk_mt7622_sgmiisys_init, -- }, { -- /* sentinel */ -- } -+ { .compatible = "mediatek,mt7622-ethsys", .data = ð_desc }, -+ { .compatible = "mediatek,mt7622-sgmiisys", .data = &sgmii_desc }, -+ { /* sentinel */ } - }; - --static int clk_mt7622_eth_probe(struct platform_device *pdev) --{ -- int (*clk_init)(struct platform_device *); -- int r; -- -- clk_init = of_device_get_match_data(&pdev->dev); -- if (!clk_init) -- return -EINVAL; -- -- r = clk_init(pdev); -- if (r) -- dev_err(&pdev->dev, -- "could not register clock provider: %s: %d\n", -- pdev->name, r); -- -- return r; --} -- - static struct platform_driver clk_mt7622_eth_drv = { -- .probe = clk_mt7622_eth_probe, -+ .probe = mtk_clk_simple_probe, -+ .remove = mtk_clk_simple_remove, - .driver = { - .name = "clk-mt7622-eth", - .of_match_table = of_match_clk_mt7622_eth, ---- a/drivers/clk/mediatek/clk-mt7622-hif.c -+++ b/drivers/clk/mediatek/clk-mt7622-hif.c -@@ -72,82 +72,27 @@ static const struct mtk_clk_rst_desc clk - .rst_bank_nr = ARRAY_SIZE(rst_ofs), - }; - --static int clk_mt7622_ssusbsys_init(struct platform_device *pdev) --{ -- struct clk_hw_onecell_data *clk_data; -- struct device_node *node = pdev->dev.of_node; -- int r; -- -- clk_data = mtk_alloc_clk_data(CLK_SSUSB_NR_CLK); -- -- mtk_clk_register_gates(&pdev->dev, node, ssusb_clks, -- ARRAY_SIZE(ssusb_clks), clk_data); -- -- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); -- if (r) -- dev_err(&pdev->dev, -- "could not register clock provider: %s: %d\n", -- pdev->name, r); -- -- mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc); -- -- return r; --} -- --static int clk_mt7622_pciesys_init(struct platform_device *pdev) --{ -- struct clk_hw_onecell_data *clk_data; -- struct device_node *node = pdev->dev.of_node; -- int r; -- -- clk_data = mtk_alloc_clk_data(CLK_PCIE_NR_CLK); -- -- mtk_clk_register_gates(&pdev->dev, node, pcie_clks, -- ARRAY_SIZE(pcie_clks), clk_data); -- -- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); -- if (r) -- dev_err(&pdev->dev, -- "could not register clock provider: %s: %d\n", -- pdev->name, r); -- -- mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc); -+static const struct mtk_clk_desc ssusb_desc = { -+ .clks = ssusb_clks, -+ .num_clks = ARRAY_SIZE(ssusb_clks), -+ .rst_desc = &clk_rst_desc, -+}; - -- return r; --} -+static const struct mtk_clk_desc pcie_desc = { -+ .clks = pcie_clks, -+ .num_clks = ARRAY_SIZE(pcie_clks), -+ .rst_desc = &clk_rst_desc, -+}; - - static const struct of_device_id of_match_clk_mt7622_hif[] = { -- { -- .compatible = "mediatek,mt7622-pciesys", -- .data = clk_mt7622_pciesys_init, -- }, { -- .compatible = "mediatek,mt7622-ssusbsys", -- .data = clk_mt7622_ssusbsys_init, -- }, { -- /* sentinel */ -- } -+ { .compatible = "mediatek,mt7622-pciesys", .data = &pcie_desc }, -+ { .compatible = "mediatek,mt7622-ssusbsys", .data = &ssusb_desc }, -+ { /* sentinel */ } - }; - --static int clk_mt7622_hif_probe(struct platform_device *pdev) --{ -- int (*clk_init)(struct platform_device *); -- int r; -- -- clk_init = of_device_get_match_data(&pdev->dev); -- if (!clk_init) -- return -EINVAL; -- -- r = clk_init(pdev); -- if (r) -- dev_err(&pdev->dev, -- "could not register clock provider: %s: %d\n", -- pdev->name, r); -- -- return r; --} -- - static struct platform_driver clk_mt7622_hif_drv = { -- .probe = clk_mt7622_hif_probe, -+ .probe = mtk_clk_simple_probe, -+ .remove = mtk_clk_simple_remove, - .driver = { - .name = "clk-mt7622-hif", - .of_match_table = of_match_clk_mt7622_hif, ---- a/drivers/clk/mediatek/clk-mt7629-hif.c -+++ b/drivers/clk/mediatek/clk-mt7629-hif.c -@@ -67,82 +67,27 @@ static const struct mtk_clk_rst_desc clk - .rst_bank_nr = ARRAY_SIZE(rst_ofs), - }; - --static int clk_mt7629_ssusbsys_init(struct platform_device *pdev) --{ -- struct clk_hw_onecell_data *clk_data; -- struct device_node *node = pdev->dev.of_node; -- int r; -- -- clk_data = mtk_alloc_clk_data(CLK_SSUSB_NR_CLK); -- -- mtk_clk_register_gates(&pdev->dev, node, ssusb_clks, -- ARRAY_SIZE(ssusb_clks), clk_data); -- -- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); -- if (r) -- dev_err(&pdev->dev, -- "could not register clock provider: %s: %d\n", -- pdev->name, r); -- -- mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc); -- -- return r; --} -- --static int clk_mt7629_pciesys_init(struct platform_device *pdev) --{ -- struct clk_hw_onecell_data *clk_data; -- struct device_node *node = pdev->dev.of_node; -- int r; -- -- clk_data = mtk_alloc_clk_data(CLK_PCIE_NR_CLK); -- -- mtk_clk_register_gates(&pdev->dev, node, pcie_clks, -- ARRAY_SIZE(pcie_clks), clk_data); -- -- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); -- if (r) -- dev_err(&pdev->dev, -- "could not register clock provider: %s: %d\n", -- pdev->name, r); -- -- mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc); -+static const struct mtk_clk_desc ssusb_desc = { -+ .clks = ssusb_clks, -+ .num_clks = ARRAY_SIZE(ssusb_clks), -+ .rst_desc = &clk_rst_desc, -+}; - -- return r; --} -+static const struct mtk_clk_desc pcie_desc = { -+ .clks = pcie_clks, -+ .num_clks = ARRAY_SIZE(pcie_clks), -+ .rst_desc = &clk_rst_desc, -+}; - - static const struct of_device_id of_match_clk_mt7629_hif[] = { -- { -- .compatible = "mediatek,mt7629-pciesys", -- .data = clk_mt7629_pciesys_init, -- }, { -- .compatible = "mediatek,mt7629-ssusbsys", -- .data = clk_mt7629_ssusbsys_init, -- }, { -- /* sentinel */ -- } -+ { .compatible = "mediatek,mt7629-pciesys", .data = &pcie_desc }, -+ { .compatible = "mediatek,mt7629-ssusbsys", .data = &ssusb_desc }, -+ { /* sentinel */ } - }; - --static int clk_mt7629_hif_probe(struct platform_device *pdev) --{ -- int (*clk_init)(struct platform_device *); -- int r; -- -- clk_init = of_device_get_match_data(&pdev->dev); -- if (!clk_init) -- return -EINVAL; -- -- r = clk_init(pdev); -- if (r) -- dev_err(&pdev->dev, -- "could not register clock provider: %s: %d\n", -- pdev->name, r); -- -- return r; --} -- - static struct platform_driver clk_mt7629_hif_drv = { -- .probe = clk_mt7629_hif_probe, -+ .probe = mtk_clk_simple_probe, -+ .remove = mtk_clk_simple_remove, - .driver = { - .name = "clk-mt7629-hif", - .of_match_table = of_match_clk_mt7629_hif, diff --git a/target/linux/mediatek/patches-6.1/227-v6.3-clk-mediatek-clk-mt7986-topckgen-Properly-keep-some-.patch b/target/linux/mediatek/patches-6.1/227-v6.3-clk-mediatek-clk-mt7986-topckgen-Properly-keep-some-.patch deleted file mode 100644 index bf9a172926e..00000000000 --- a/target/linux/mediatek/patches-6.1/227-v6.3-clk-mediatek-clk-mt7986-topckgen-Properly-keep-some-.patch +++ /dev/null @@ -1,97 +0,0 @@ -From 3511004225ce917a4aa6e6ac61481ac60f08f401 Mon Sep 17 00:00:00 2001 -From: AngeloGioacchino Del Regno -Date: Fri, 20 Jan 2023 10:20:52 +0100 -Subject: [PATCH 06/15] clk: mediatek: clk-mt7986-topckgen: Properly keep some - clocks enabled - -Instead of calling clk_prepare_enable() on a bunch of clocks at probe -time, set the CLK_IS_CRITICAL flag to the same as these are required -to be always on, and this is the right way of achieving that. - -Signed-off-by: AngeloGioacchino Del Regno -Reviewed-by: Chen-Yu Tsai -Reviewed-by: Miles Chen -Link: https://lore.kernel.org/r/20230120092053.182923-23-angelogioacchino.delregno@collabora.com -Tested-by: Mingming Su -Signed-off-by: Stephen Boyd ---- - drivers/clk/mediatek/clk-mt7986-topckgen.c | 46 +++++++++++----------- - 1 file changed, 24 insertions(+), 22 deletions(-) - ---- a/drivers/clk/mediatek/clk-mt7986-topckgen.c -+++ b/drivers/clk/mediatek/clk-mt7986-topckgen.c -@@ -202,16 +202,23 @@ static const struct mtk_mux top_muxes[] - MUX_GATE_CLR_SET_UPD(CLK_TOP_F_26M_ADC_SEL, "f_26m_adc_sel", - f_26m_adc_parents, 0x020, 0x024, 0x028, 16, 1, 23, - 0x1C0, 10), -- MUX_GATE_CLR_SET_UPD(CLK_TOP_DRAMC_SEL, "dramc_sel", f_26m_adc_parents, -- 0x020, 0x024, 0x028, 24, 1, 31, 0x1C0, 11), -+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_DRAMC_SEL, "dramc_sel", -+ f_26m_adc_parents, 0x020, 0x024, 0x028, -+ 24, 1, 31, 0x1C0, 11, -+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT), - /* CLK_CFG_3 */ -- MUX_GATE_CLR_SET_UPD(CLK_TOP_DRAMC_MD32_SEL, "dramc_md32_sel", -- dramc_md32_parents, 0x030, 0x034, 0x038, 0, 1, 7, -- 0x1C0, 12), -- MUX_GATE_CLR_SET_UPD(CLK_TOP_SYSAXI_SEL, "sysaxi_sel", sysaxi_parents, -- 0x030, 0x034, 0x038, 8, 2, 15, 0x1C0, 13), -- MUX_GATE_CLR_SET_UPD(CLK_TOP_SYSAPB_SEL, "sysapb_sel", sysapb_parents, -- 0x030, 0x034, 0x038, 16, 2, 23, 0x1C0, 14), -+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_DRAMC_MD32_SEL, "dramc_md32_sel", -+ dramc_md32_parents, 0x030, 0x034, 0x038, -+ 0, 1, 7, 0x1C0, 12, -+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT), -+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SYSAXI_SEL, "sysaxi_sel", -+ sysaxi_parents, 0x030, 0x034, 0x038, -+ 8, 2, 15, 0x1C0, 13, -+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT), -+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SYSAPB_SEL, "sysapb_sel", -+ sysapb_parents, 0x030, 0x034, 0x038, -+ 16, 2, 23, 0x1C0, 14, -+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT), - MUX_GATE_CLR_SET_UPD(CLK_TOP_ARM_DB_MAIN_SEL, "arm_db_main_sel", - arm_db_main_parents, 0x030, 0x034, 0x038, 24, 1, - 31, 0x1C0, 15), -@@ -234,9 +241,10 @@ static const struct mtk_mux top_muxes[] - MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_325M_SEL, "sgm_325m_sel", - sgm_325m_parents, 0x050, 0x054, 0x058, 8, 1, 15, - 0x1C0, 21), -- MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_REG_SEL, "sgm_reg_sel", -- sgm_reg_parents, 0x050, 0x054, 0x058, 16, 1, 23, -- 0x1C0, 22), -+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SGM_REG_SEL, "sgm_reg_sel", -+ sgm_reg_parents, 0x050, 0x054, 0x058, -+ 16, 1, 23, 0x1C0, 22, -+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT), - MUX_GATE_CLR_SET_UPD(CLK_TOP_A1SYS_SEL, "a1sys_sel", a1sys_parents, - 0x050, 0x054, 0x058, 24, 1, 31, 0x1C0, 23), - /* CLK_CFG_6 */ -@@ -252,9 +260,10 @@ static const struct mtk_mux top_muxes[] - f_26m_adc_parents, 0x060, 0x064, 0x068, 24, 1, 31, - 0x1C0, 27), - /* CLK_CFG_7 */ -- MUX_GATE_CLR_SET_UPD(CLK_TOP_F26M_SEL, "csw_f26m_sel", -- f_26m_adc_parents, 0x070, 0x074, 0x078, 0, 1, 7, -- 0x1C0, 28), -+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_F26M_SEL, "csw_f26m_sel", -+ f_26m_adc_parents, 0x070, 0x074, 0x078, -+ 0, 1, 7, 0x1C0, 28, -+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT), - MUX_GATE_CLR_SET_UPD(CLK_TOP_AUD_L_SEL, "aud_l_sel", aud_l_parents, - 0x070, 0x074, 0x078, 8, 2, 15, 0x1C0, 29), - MUX_GATE_CLR_SET_UPD(CLK_TOP_A_TUNER_SEL, "a_tuner_sel", -@@ -307,13 +316,6 @@ static int clk_mt7986_topckgen_probe(str - ARRAY_SIZE(top_muxes), node, - &mt7986_clk_lock, clk_data); - -- clk_prepare_enable(clk_data->hws[CLK_TOP_SYSAXI_SEL]->clk); -- clk_prepare_enable(clk_data->hws[CLK_TOP_SYSAPB_SEL]->clk); -- clk_prepare_enable(clk_data->hws[CLK_TOP_DRAMC_SEL]->clk); -- clk_prepare_enable(clk_data->hws[CLK_TOP_DRAMC_MD32_SEL]->clk); -- clk_prepare_enable(clk_data->hws[CLK_TOP_F26M_SEL]->clk); -- clk_prepare_enable(clk_data->hws[CLK_TOP_SGM_REG_SEL]->clk); -- - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - - if (r) { diff --git a/target/linux/mediatek/patches-6.1/228-v6.3-clk-mediatek-clk-mt7986-topckgen-Migrate-to-mtk_clk_.patch b/target/linux/mediatek/patches-6.1/228-v6.3-clk-mediatek-clk-mt7986-topckgen-Migrate-to-mtk_clk_.patch deleted file mode 100644 index d77b859f005..00000000000 --- a/target/linux/mediatek/patches-6.1/228-v6.3-clk-mediatek-clk-mt7986-topckgen-Migrate-to-mtk_clk_.patch +++ /dev/null @@ -1,88 +0,0 @@ -From 9ce3b4e4719d4eec38b2c8da939c073835573d1d Mon Sep 17 00:00:00 2001 -From: AngeloGioacchino Del Regno -Date: Fri, 20 Jan 2023 10:20:53 +0100 -Subject: [PATCH 07/15] clk: mediatek: clk-mt7986-topckgen: Migrate to - mtk_clk_simple_probe() - -There are no more non-common calls in clk_mt7986_topckgen_probe(): -migrate this driver to mtk_clk_simple_probe(). - -Signed-off-by: AngeloGioacchino Del Regno -Reviewed-by: Miles Chen -Reviewed-by: Chen-Yu Tsai -Link: https://lore.kernel.org/r/20230120092053.182923-24-angelogioacchino.delregno@collabora.com -Tested-by: Mingming Su -Signed-off-by: Stephen Boyd ---- - drivers/clk/mediatek/clk-mt7986-topckgen.c | 55 +++++----------------- - 1 file changed, 13 insertions(+), 42 deletions(-) - ---- a/drivers/clk/mediatek/clk-mt7986-topckgen.c -+++ b/drivers/clk/mediatek/clk-mt7986-topckgen.c -@@ -290,53 +290,24 @@ static const struct mtk_mux top_muxes[] - 0x1C4, 5), - }; - --static int clk_mt7986_topckgen_probe(struct platform_device *pdev) --{ -- struct clk_hw_onecell_data *clk_data; -- struct device_node *node = pdev->dev.of_node; -- int r; -- void __iomem *base; -- int nr = ARRAY_SIZE(top_fixed_clks) + ARRAY_SIZE(top_divs) + -- ARRAY_SIZE(top_muxes); -- -- base = of_iomap(node, 0); -- if (!base) { -- pr_err("%s(): ioremap failed\n", __func__); -- return -ENOMEM; -- } -- -- clk_data = mtk_alloc_clk_data(nr); -- if (!clk_data) -- return -ENOMEM; -- -- mtk_clk_register_fixed_clks(top_fixed_clks, ARRAY_SIZE(top_fixed_clks), -- clk_data); -- mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), clk_data); -- mtk_clk_register_muxes(&pdev->dev, top_muxes, -- ARRAY_SIZE(top_muxes), node, -- &mt7986_clk_lock, clk_data); -- -- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); -- -- if (r) { -- pr_err("%s(): could not register clock provider: %d\n", -- __func__, r); -- goto free_topckgen_data; -- } -- return r; -- --free_topckgen_data: -- mtk_free_clk_data(clk_data); -- return r; --} -+static const struct mtk_clk_desc topck_desc = { -+ .fixed_clks = top_fixed_clks, -+ .num_fixed_clks = ARRAY_SIZE(top_fixed_clks), -+ .factor_clks = top_divs, -+ .num_factor_clks = ARRAY_SIZE(top_divs), -+ .mux_clks = top_muxes, -+ .num_mux_clks = ARRAY_SIZE(top_muxes), -+ .clk_lock = &mt7986_clk_lock, -+}; - - static const struct of_device_id of_match_clk_mt7986_topckgen[] = { -- { .compatible = "mediatek,mt7986-topckgen", }, -- {} -+ { .compatible = "mediatek,mt7986-topckgen", .data = &topck_desc }, -+ { /* sentinel */ } - }; - - static struct platform_driver clk_mt7986_topckgen_drv = { -- .probe = clk_mt7986_topckgen_probe, -+ .probe = mtk_clk_simple_probe, -+ .remove = mtk_clk_simple_remove, - .driver = { - .name = "clk-mt7986-topckgen", - .of_match_table = of_match_clk_mt7986_topckgen, diff --git a/target/linux/mediatek/patches-6.1/229-v6.4-clk-mediatek-mt7986-apmixed-Use-PLL_AO-flag-to-set-c.patch b/target/linux/mediatek/patches-6.1/229-v6.4-clk-mediatek-mt7986-apmixed-Use-PLL_AO-flag-to-set-c.patch deleted file mode 100644 index a47dd4b0539..00000000000 --- a/target/linux/mediatek/patches-6.1/229-v6.4-clk-mediatek-mt7986-apmixed-Use-PLL_AO-flag-to-set-c.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 06abdc84080729dc2c54946e1712c5ee1589ca1c Mon Sep 17 00:00:00 2001 -From: AngeloGioacchino Del Regno -Date: Mon, 6 Mar 2023 15:05:21 +0100 -Subject: [PATCH 13/15] clk: mediatek: mt7986-apmixed: Use PLL_AO flag to set - critical clock - -Instead of calling clk_prepare_enable() at probe time, add the PLL_AO -flag to CLK_APMIXED_ARMPLL clock: this will set CLK_IS_CRITICAL. - -Signed-off-by: AngeloGioacchino Del Regno -Reviewed-by: Chen-Yu Tsai -Tested-by: Daniel Golle -Link: https://lore.kernel.org/r/20230306140543.1813621-33-angelogioacchino.delregno@collabora.com -Signed-off-by: Stephen Boyd ---- - drivers/clk/mediatek/clk-mt7986-apmixed.c | 4 +--- - 1 file changed, 1 insertion(+), 3 deletions(-) - ---- a/drivers/clk/mediatek/clk-mt7986-apmixed.c -+++ b/drivers/clk/mediatek/clk-mt7986-apmixed.c -@@ -42,7 +42,7 @@ - "clkxtal") - - static const struct mtk_pll_data plls[] = { -- PLL(CLK_APMIXED_ARMPLL, "armpll", 0x0200, 0x020C, 0x0, 0, 32, -+ PLL(CLK_APMIXED_ARMPLL, "armpll", 0x0200, 0x020C, 0x0, PLL_AO, 32, - 0x0200, 4, 0, 0x0204, 0), - PLL(CLK_APMIXED_NET2PLL, "net2pll", 0x0210, 0x021C, 0x0, 0, 32, - 0x0210, 4, 0, 0x0214, 0), -@@ -77,8 +77,6 @@ static int clk_mt7986_apmixed_probe(stru - - mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data); - -- clk_prepare_enable(clk_data->hws[CLK_APMIXED_ARMPLL]->clk); -- - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - if (r) { - pr_err("%s(): could not register clock provider: %d\n", diff --git a/target/linux/mediatek/patches-6.1/230-v6.4-dt-bindings-clock-mediatek-add-mt7981-clock-IDs.patch b/target/linux/mediatek/patches-6.1/230-v6.4-dt-bindings-clock-mediatek-add-mt7981-clock-IDs.patch deleted file mode 100644 index ae76940e1d8..00000000000 --- a/target/linux/mediatek/patches-6.1/230-v6.4-dt-bindings-clock-mediatek-add-mt7981-clock-IDs.patch +++ /dev/null @@ -1,237 +0,0 @@ -From a6473d0f9f07b1196f3a67099826f50a2a4e84e8 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Thu, 26 Jan 2023 03:34:05 +0000 -Subject: [PATCH] dt-bindings: clock: mediatek: add mt7981 clock IDs - -Add MT7981 clock dt-bindings, include topckgen, apmixedsys, -infracfg, and ethernet subsystem clocks. - -Acked-by: Krzysztof Kozlowski -Signed-off-by: Jianhui Zhao -Signed-off-by: Daniel Golle -Link: https://lore.kernel.org/r/e353d32b5a4481766519a037afe1ed44e31ece1a.1674703830.git.daniel@makrotopia.org -Reviewed-by: AngeloGioacchino Del Regno -Signed-off-by: Stephen Boyd ---- - .../dt-bindings/clock/mediatek,mt7981-clk.h | 215 ++++++++++++++++++ - 1 file changed, 215 insertions(+) - create mode 100644 include/dt-bindings/clock/mediatek,mt7981-clk.h - ---- /dev/null -+++ b/include/dt-bindings/clock/mediatek,mt7981-clk.h -@@ -0,0 +1,215 @@ -+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ -+/* -+ * Copyright (c) 2021 MediaTek Inc. -+ * Author: Wenzhen.Yu -+ * Author: Jianhui Zhao -+ * Author: Daniel Golle -+ */ -+ -+#ifndef _DT_BINDINGS_CLK_MT7981_H -+#define _DT_BINDINGS_CLK_MT7981_H -+ -+/* TOPCKGEN */ -+#define CLK_TOP_CB_CKSQ_40M 0 -+#define CLK_TOP_CB_M_416M 1 -+#define CLK_TOP_CB_M_D2 2 -+#define CLK_TOP_CB_M_D3 3 -+#define CLK_TOP_M_D3_D2 4 -+#define CLK_TOP_CB_M_D4 5 -+#define CLK_TOP_CB_M_D8 6 -+#define CLK_TOP_M_D8_D2 7 -+#define CLK_TOP_CB_MM_720M 8 -+#define CLK_TOP_CB_MM_D2 9 -+#define CLK_TOP_CB_MM_D3 10 -+#define CLK_TOP_CB_MM_D3_D5 11 -+#define CLK_TOP_CB_MM_D4 12 -+#define CLK_TOP_CB_MM_D6 13 -+#define CLK_TOP_MM_D6_D2 14 -+#define CLK_TOP_CB_MM_D8 15 -+#define CLK_TOP_CB_APLL2_196M 16 -+#define CLK_TOP_APLL2_D2 17 -+#define CLK_TOP_APLL2_D4 18 -+#define CLK_TOP_NET1_2500M 19 -+#define CLK_TOP_CB_NET1_D4 20 -+#define CLK_TOP_CB_NET1_D5 21 -+#define CLK_TOP_NET1_D5_D2 22 -+#define CLK_TOP_NET1_D5_D4 23 -+#define CLK_TOP_CB_NET1_D8 24 -+#define CLK_TOP_NET1_D8_D2 25 -+#define CLK_TOP_NET1_D8_D4 26 -+#define CLK_TOP_CB_NET2_800M 27 -+#define CLK_TOP_CB_NET2_D2 28 -+#define CLK_TOP_CB_NET2_D4 29 -+#define CLK_TOP_NET2_D4_D2 30 -+#define CLK_TOP_NET2_D4_D4 31 -+#define CLK_TOP_CB_NET2_D6 32 -+#define CLK_TOP_CB_WEDMCU_208M 33 -+#define CLK_TOP_CB_SGM_325M 34 -+#define CLK_TOP_CKSQ_40M_D2 35 -+#define CLK_TOP_CB_RTC_32K 36 -+#define CLK_TOP_CB_RTC_32P7K 37 -+#define CLK_TOP_USB_TX250M 38 -+#define CLK_TOP_FAUD 39 -+#define CLK_TOP_NFI1X 40 -+#define CLK_TOP_USB_EQ_RX250M 41 -+#define CLK_TOP_USB_CDR_CK 42 -+#define CLK_TOP_USB_LN0_CK 43 -+#define CLK_TOP_SPINFI_BCK 44 -+#define CLK_TOP_SPI 45 -+#define CLK_TOP_SPIM_MST 46 -+#define CLK_TOP_UART_BCK 47 -+#define CLK_TOP_PWM_BCK 48 -+#define CLK_TOP_I2C_BCK 49 -+#define CLK_TOP_PEXTP_TL 50 -+#define CLK_TOP_EMMC_208M 51 -+#define CLK_TOP_EMMC_400M 52 -+#define CLK_TOP_DRAMC_REF 53 -+#define CLK_TOP_DRAMC_MD32 54 -+#define CLK_TOP_SYSAXI 55 -+#define CLK_TOP_SYSAPB 56 -+#define CLK_TOP_ARM_DB_MAIN 57 -+#define CLK_TOP_AP2CNN_HOST 58 -+#define CLK_TOP_NETSYS 59 -+#define CLK_TOP_NETSYS_500M 60 -+#define CLK_TOP_NETSYS_WED_MCU 61 -+#define CLK_TOP_NETSYS_2X 62 -+#define CLK_TOP_SGM_325M 63 -+#define CLK_TOP_SGM_REG 64 -+#define CLK_TOP_F26M 65 -+#define CLK_TOP_EIP97B 66 -+#define CLK_TOP_USB3_PHY 67 -+#define CLK_TOP_AUD 68 -+#define CLK_TOP_A1SYS 69 -+#define CLK_TOP_AUD_L 70 -+#define CLK_TOP_A_TUNER 71 -+#define CLK_TOP_U2U3_REF 72 -+#define CLK_TOP_U2U3_SYS 73 -+#define CLK_TOP_U2U3_XHCI 74 -+#define CLK_TOP_USB_FRMCNT 75 -+#define CLK_TOP_NFI1X_SEL 76 -+#define CLK_TOP_SPINFI_SEL 77 -+#define CLK_TOP_SPI_SEL 78 -+#define CLK_TOP_SPIM_MST_SEL 79 -+#define CLK_TOP_UART_SEL 80 -+#define CLK_TOP_PWM_SEL 81 -+#define CLK_TOP_I2C_SEL 82 -+#define CLK_TOP_PEXTP_TL_SEL 83 -+#define CLK_TOP_EMMC_208M_SEL 84 -+#define CLK_TOP_EMMC_400M_SEL 85 -+#define CLK_TOP_F26M_SEL 86 -+#define CLK_TOP_DRAMC_SEL 87 -+#define CLK_TOP_DRAMC_MD32_SEL 88 -+#define CLK_TOP_SYSAXI_SEL 89 -+#define CLK_TOP_SYSAPB_SEL 90 -+#define CLK_TOP_ARM_DB_MAIN_SEL 91 -+#define CLK_TOP_AP2CNN_HOST_SEL 92 -+#define CLK_TOP_NETSYS_SEL 93 -+#define CLK_TOP_NETSYS_500M_SEL 94 -+#define CLK_TOP_NETSYS_MCU_SEL 95 -+#define CLK_TOP_NETSYS_2X_SEL 96 -+#define CLK_TOP_SGM_325M_SEL 97 -+#define CLK_TOP_SGM_REG_SEL 98 -+#define CLK_TOP_EIP97B_SEL 99 -+#define CLK_TOP_USB3_PHY_SEL 100 -+#define CLK_TOP_AUD_SEL 101 -+#define CLK_TOP_A1SYS_SEL 102 -+#define CLK_TOP_AUD_L_SEL 103 -+#define CLK_TOP_A_TUNER_SEL 104 -+#define CLK_TOP_U2U3_SEL 105 -+#define CLK_TOP_U2U3_SYS_SEL 106 -+#define CLK_TOP_U2U3_XHCI_SEL 107 -+#define CLK_TOP_USB_FRMCNT_SEL 108 -+#define CLK_TOP_AUD_I2S_M 109 -+ -+/* INFRACFG */ -+#define CLK_INFRA_66M_MCK 0 -+#define CLK_INFRA_UART0_SEL 1 -+#define CLK_INFRA_UART1_SEL 2 -+#define CLK_INFRA_UART2_SEL 3 -+#define CLK_INFRA_SPI0_SEL 4 -+#define CLK_INFRA_SPI1_SEL 5 -+#define CLK_INFRA_SPI2_SEL 6 -+#define CLK_INFRA_PWM1_SEL 7 -+#define CLK_INFRA_PWM2_SEL 8 -+#define CLK_INFRA_PWM3_SEL 9 -+#define CLK_INFRA_PWM_BSEL 10 -+#define CLK_INFRA_PCIE_SEL 11 -+#define CLK_INFRA_GPT_STA 12 -+#define CLK_INFRA_PWM_HCK 13 -+#define CLK_INFRA_PWM_STA 14 -+#define CLK_INFRA_PWM1_CK 15 -+#define CLK_INFRA_PWM2_CK 16 -+#define CLK_INFRA_PWM3_CK 17 -+#define CLK_INFRA_CQ_DMA_CK 18 -+#define CLK_INFRA_AUD_BUS_CK 19 -+#define CLK_INFRA_AUD_26M_CK 20 -+#define CLK_INFRA_AUD_L_CK 21 -+#define CLK_INFRA_AUD_AUD_CK 22 -+#define CLK_INFRA_AUD_EG2_CK 23 -+#define CLK_INFRA_DRAMC_26M_CK 24 -+#define CLK_INFRA_DBG_CK 25 -+#define CLK_INFRA_AP_DMA_CK 26 -+#define CLK_INFRA_SEJ_CK 27 -+#define CLK_INFRA_SEJ_13M_CK 28 -+#define CLK_INFRA_THERM_CK 29 -+#define CLK_INFRA_I2C0_CK 30 -+#define CLK_INFRA_UART0_CK 31 -+#define CLK_INFRA_UART1_CK 32 -+#define CLK_INFRA_UART2_CK 33 -+#define CLK_INFRA_SPI2_CK 34 -+#define CLK_INFRA_SPI2_HCK_CK 35 -+#define CLK_INFRA_NFI1_CK 36 -+#define CLK_INFRA_SPINFI1_CK 37 -+#define CLK_INFRA_NFI_HCK_CK 38 -+#define CLK_INFRA_SPI0_CK 39 -+#define CLK_INFRA_SPI1_CK 40 -+#define CLK_INFRA_SPI0_HCK_CK 41 -+#define CLK_INFRA_SPI1_HCK_CK 42 -+#define CLK_INFRA_FRTC_CK 43 -+#define CLK_INFRA_MSDC_CK 44 -+#define CLK_INFRA_MSDC_HCK_CK 45 -+#define CLK_INFRA_MSDC_133M_CK 46 -+#define CLK_INFRA_MSDC_66M_CK 47 -+#define CLK_INFRA_ADC_26M_CK 48 -+#define CLK_INFRA_ADC_FRC_CK 49 -+#define CLK_INFRA_FBIST2FPC_CK 50 -+#define CLK_INFRA_I2C_MCK_CK 51 -+#define CLK_INFRA_I2C_PCK_CK 52 -+#define CLK_INFRA_IUSB_133_CK 53 -+#define CLK_INFRA_IUSB_66M_CK 54 -+#define CLK_INFRA_IUSB_SYS_CK 55 -+#define CLK_INFRA_IUSB_CK 56 -+#define CLK_INFRA_IPCIE_CK 57 -+#define CLK_INFRA_IPCIE_PIPE_CK 58 -+#define CLK_INFRA_IPCIER_CK 59 -+#define CLK_INFRA_IPCIEB_CK 60 -+ -+/* APMIXEDSYS */ -+#define CLK_APMIXED_ARMPLL 0 -+#define CLK_APMIXED_NET2PLL 1 -+#define CLK_APMIXED_MMPLL 2 -+#define CLK_APMIXED_SGMPLL 3 -+#define CLK_APMIXED_WEDMCUPLL 4 -+#define CLK_APMIXED_NET1PLL 5 -+#define CLK_APMIXED_MPLL 6 -+#define CLK_APMIXED_APLL2 7 -+ -+/* SGMIISYS_0 */ -+#define CLK_SGM0_TX_EN 0 -+#define CLK_SGM0_RX_EN 1 -+#define CLK_SGM0_CK0_EN 2 -+#define CLK_SGM0_CDR_CK0_EN 3 -+ -+/* SGMIISYS_1 */ -+#define CLK_SGM1_TX_EN 0 -+#define CLK_SGM1_RX_EN 1 -+#define CLK_SGM1_CK1_EN 2 -+#define CLK_SGM1_CDR_CK1_EN 3 -+ -+/* ETHSYS */ -+#define CLK_ETH_FE_EN 0 -+#define CLK_ETH_GP2_EN 1 -+#define CLK_ETH_GP1_EN 2 -+#define CLK_ETH_WOCPU0_EN 3 -+ -+#endif /* _DT_BINDINGS_CLK_MT7981_H */ diff --git a/target/linux/mediatek/patches-6.1/231-v6.4-clk-mediatek-add-MT7981-clock-support.patch b/target/linux/mediatek/patches-6.1/231-v6.4-clk-mediatek-add-MT7981-clock-support.patch deleted file mode 100644 index f9dd94a78a5..00000000000 --- a/target/linux/mediatek/patches-6.1/231-v6.4-clk-mediatek-add-MT7981-clock-support.patch +++ /dev/null @@ -1,932 +0,0 @@ -From 8efeeb9c8b4ecf4fb4a74be9403aba951403bbaa Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Thu, 26 Jan 2023 03:34:24 +0000 -Subject: [PATCH] clk: mediatek: add MT7981 clock support - -Add MT7981 clock support, include topckgen, apmixedsys, infracfg and -ethernet subsystem clocks. - -The drivers are based on clk-mt7981.c which can be found in MediaTek's -SDK sources. To be fit for upstream inclusion the driver has been split -into clock domains and the infracfg part has been significantly -de-bloated by removing all the 1:1 factors (aliases). - -Signed-off-by: Jianhui Zhao -Signed-off-by: Daniel Golle -Link: https://lore.kernel.org/r/8136eb5b2049177bc2f6d3e0f2aefecc342d626f.1674703830.git.daniel@makrotopia.org -Reviewed-by: AngeloGioacchino Del Regno -[sboyd@kernel.org: Add module license] -Signed-off-by: Stephen Boyd ---- - drivers/clk/mediatek/Kconfig | 17 + - drivers/clk/mediatek/Makefile | 4 + - drivers/clk/mediatek/clk-mt7981-apmixed.c | 102 +++++ - drivers/clk/mediatek/clk-mt7981-eth.c | 118 ++++++ - drivers/clk/mediatek/clk-mt7981-infracfg.c | 207 ++++++++++ - drivers/clk/mediatek/clk-mt7981-topckgen.c | 422 +++++++++++++++++++++ - 6 files changed, 870 insertions(+) - create mode 100644 drivers/clk/mediatek/clk-mt7981-apmixed.c - create mode 100644 drivers/clk/mediatek/clk-mt7981-eth.c - create mode 100644 drivers/clk/mediatek/clk-mt7981-infracfg.c - create mode 100644 drivers/clk/mediatek/clk-mt7981-topckgen.c - ---- a/drivers/clk/mediatek/Kconfig -+++ b/drivers/clk/mediatek/Kconfig -@@ -381,6 +381,23 @@ config COMMON_CLK_MT7629_HIFSYS - This driver supports MediaTek MT7629 HIFSYS clocks providing - to PCI-E and USB. - -+config COMMON_CLK_MT7981 -+ bool "Clock driver for MediaTek MT7981" -+ depends on ARCH_MEDIATEK || COMPILE_TEST -+ select COMMON_CLK_MEDIATEK -+ default ARCH_MEDIATEK -+ help -+ This driver supports MediaTek MT7981 basic clocks and clocks -+ required for various peripherals found on this SoC. -+ -+config COMMON_CLK_MT7981_ETHSYS -+ tristate "Clock driver for MediaTek MT7981 ETHSYS" -+ depends on COMMON_CLK_MT7981 -+ default COMMON_CLK_MT7981 -+ help -+ This driver adds support for clocks for Ethernet and SGMII -+ required on MediaTek MT7981 SoC. -+ - config COMMON_CLK_MT7986 - bool "Clock driver for MediaTek MT7986" - depends on ARCH_MEDIATEK || COMPILE_TEST ---- a/drivers/clk/mediatek/Makefile -+++ b/drivers/clk/mediatek/Makefile -@@ -52,6 +52,10 @@ obj-$(CONFIG_COMMON_CLK_MT7622_AUDSYS) + - obj-$(CONFIG_COMMON_CLK_MT7629) += clk-mt7629.o - obj-$(CONFIG_COMMON_CLK_MT7629_ETHSYS) += clk-mt7629-eth.o - obj-$(CONFIG_COMMON_CLK_MT7629_HIFSYS) += clk-mt7629-hif.o -+obj-$(CONFIG_COMMON_CLK_MT7981) += clk-mt7981-apmixed.o -+obj-$(CONFIG_COMMON_CLK_MT7981) += clk-mt7981-topckgen.o -+obj-$(CONFIG_COMMON_CLK_MT7981) += clk-mt7981-infracfg.o -+obj-$(CONFIG_COMMON_CLK_MT7981_ETHSYS) += clk-mt7981-eth.o - obj-$(CONFIG_COMMON_CLK_MT7986) += clk-mt7986-apmixed.o - obj-$(CONFIG_COMMON_CLK_MT7986) += clk-mt7986-topckgen.o - obj-$(CONFIG_COMMON_CLK_MT7986) += clk-mt7986-infracfg.o ---- /dev/null -+++ b/drivers/clk/mediatek/clk-mt7981-apmixed.c -@@ -0,0 +1,102 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright (c) 2021 MediaTek Inc. -+ * Author: Sam Shih -+ * Author: Wenzhen Yu -+ * Author: Jianhui Zhao -+ * Author: Daniel Golle -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "clk-gate.h" -+#include "clk-mtk.h" -+#include "clk-mux.h" -+#include "clk-pll.h" -+ -+#include -+#include -+ -+#define MT7981_PLL_FMAX (2500UL * MHZ) -+#define CON0_MT7981_RST_BAR BIT(27) -+ -+#define PLL_xtal(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, \ -+ _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift, \ -+ _div_table, _parent_name) \ -+ { \ -+ .id = _id, .name = _name, .reg = _reg, .pwr_reg = _pwr_reg, \ -+ .en_mask = _en_mask, .flags = _flags, \ -+ .rst_bar_mask = CON0_MT7981_RST_BAR, .fmax = MT7981_PLL_FMAX, \ -+ .pcwbits = _pcwbits, .pd_reg = _pd_reg, .pd_shift = _pd_shift, \ -+ .tuner_reg = _tuner_reg, .pcw_reg = _pcw_reg, \ -+ .pcw_shift = _pcw_shift, .div_table = _div_table, \ -+ .parent_name = _parent_name, \ -+ } -+ -+#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, _pd_reg, \ -+ _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift) \ -+ PLL_xtal(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, \ -+ _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift, NULL, \ -+ "clkxtal") -+ -+static const struct mtk_pll_data plls[] = { -+ PLL(CLK_APMIXED_ARMPLL, "armpll", 0x0200, 0x020C, 0x00000001, PLL_AO, -+ 32, 0x0200, 4, 0, 0x0204, 0), -+ PLL(CLK_APMIXED_NET2PLL, "net2pll", 0x0210, 0x021C, 0x00000001, 0, 32, -+ 0x0210, 4, 0, 0x0214, 0), -+ PLL(CLK_APMIXED_MMPLL, "mmpll", 0x0220, 0x022C, 0x00000001, 0, 32, -+ 0x0220, 4, 0, 0x0224, 0), -+ PLL(CLK_APMIXED_SGMPLL, "sgmpll", 0x0230, 0x023C, 0x00000001, 0, 32, -+ 0x0230, 4, 0, 0x0234, 0), -+ PLL(CLK_APMIXED_WEDMCUPLL, "wedmcupll", 0x0240, 0x024C, 0x00000001, 0, 32, -+ 0x0240, 4, 0, 0x0244, 0), -+ PLL(CLK_APMIXED_NET1PLL, "net1pll", 0x0250, 0x025C, 0x00000001, 0, 32, -+ 0x0250, 4, 0, 0x0254, 0), -+ PLL(CLK_APMIXED_MPLL, "mpll", 0x0260, 0x0270, 0x00000001, 0, 32, -+ 0x0260, 4, 0, 0x0264, 0), -+ PLL(CLK_APMIXED_APLL2, "apll2", 0x0278, 0x0288, 0x00000001, 0, 32, -+ 0x0278, 4, 0, 0x027C, 0), -+}; -+ -+static const struct of_device_id of_match_clk_mt7981_apmixed[] = { -+ { .compatible = "mediatek,mt7981-apmixedsys", }, -+ { /* sentinel */ } -+}; -+ -+static int clk_mt7981_apmixed_probe(struct platform_device *pdev) -+{ -+ struct clk_hw_onecell_data *clk_data; -+ struct device_node *node = pdev->dev.of_node; -+ int r; -+ -+ clk_data = mtk_alloc_clk_data(ARRAY_SIZE(plls)); -+ if (!clk_data) -+ return -ENOMEM; -+ -+ mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data); -+ -+ r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); -+ if (r) { -+ pr_err("%s(): could not register clock provider: %d\n", -+ __func__, r); -+ goto free_apmixed_data; -+ } -+ return r; -+ -+free_apmixed_data: -+ mtk_free_clk_data(clk_data); -+ return r; -+} -+ -+static struct platform_driver clk_mt7981_apmixed_drv = { -+ .probe = clk_mt7981_apmixed_probe, -+ .driver = { -+ .name = "clk-mt7981-apmixed", -+ .of_match_table = of_match_clk_mt7981_apmixed, -+ }, -+}; -+builtin_platform_driver(clk_mt7981_apmixed_drv); ---- /dev/null -+++ b/drivers/clk/mediatek/clk-mt7981-eth.c -@@ -0,0 +1,118 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright (c) 2021 MediaTek Inc. -+ * Author: Sam Shih -+ * Author: Wenzhen Yu -+ * Author: Jianhui Zhao -+ * Author: Daniel Golle -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include "clk-mtk.h" -+#include "clk-gate.h" -+ -+#include -+ -+static const struct mtk_gate_regs sgmii0_cg_regs = { -+ .set_ofs = 0xE4, -+ .clr_ofs = 0xE4, -+ .sta_ofs = 0xE4, -+}; -+ -+#define GATE_SGMII0(_id, _name, _parent, _shift) { \ -+ .id = _id, \ -+ .name = _name, \ -+ .parent_name = _parent, \ -+ .regs = &sgmii0_cg_regs, \ -+ .shift = _shift, \ -+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \ -+ } -+ -+static const struct mtk_gate sgmii0_clks[] __initconst = { -+ GATE_SGMII0(CLK_SGM0_TX_EN, "sgm0_tx_en", "usb_tx250m", 2), -+ GATE_SGMII0(CLK_SGM0_RX_EN, "sgm0_rx_en", "usb_eq_rx250m", 3), -+ GATE_SGMII0(CLK_SGM0_CK0_EN, "sgm0_ck0_en", "usb_ln0", 4), -+ GATE_SGMII0(CLK_SGM0_CDR_CK0_EN, "sgm0_cdr_ck0_en", "usb_cdr", 5), -+}; -+ -+static const struct mtk_gate_regs sgmii1_cg_regs = { -+ .set_ofs = 0xE4, -+ .clr_ofs = 0xE4, -+ .sta_ofs = 0xE4, -+}; -+ -+#define GATE_SGMII1(_id, _name, _parent, _shift) { \ -+ .id = _id, \ -+ .name = _name, \ -+ .parent_name = _parent, \ -+ .regs = &sgmii1_cg_regs, \ -+ .shift = _shift, \ -+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \ -+ } -+ -+static const struct mtk_gate sgmii1_clks[] __initconst = { -+ GATE_SGMII1(CLK_SGM1_TX_EN, "sgm1_tx_en", "usb_tx250m", 2), -+ GATE_SGMII1(CLK_SGM1_RX_EN, "sgm1_rx_en", "usb_eq_rx250m", 3), -+ GATE_SGMII1(CLK_SGM1_CK1_EN, "sgm1_ck1_en", "usb_ln0", 4), -+ GATE_SGMII1(CLK_SGM1_CDR_CK1_EN, "sgm1_cdr_ck1_en", "usb_cdr", 5), -+}; -+ -+static const struct mtk_gate_regs eth_cg_regs = { -+ .set_ofs = 0x30, -+ .clr_ofs = 0x30, -+ .sta_ofs = 0x30, -+}; -+ -+#define GATE_ETH(_id, _name, _parent, _shift) { \ -+ .id = _id, \ -+ .name = _name, \ -+ .parent_name = _parent, \ -+ .regs = ð_cg_regs, \ -+ .shift = _shift, \ -+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \ -+ } -+ -+static const struct mtk_gate eth_clks[] __initconst = { -+ GATE_ETH(CLK_ETH_FE_EN, "eth_fe_en", "netsys_2x", 6), -+ GATE_ETH(CLK_ETH_GP2_EN, "eth_gp2_en", "sgm_325m", 7), -+ GATE_ETH(CLK_ETH_GP1_EN, "eth_gp1_en", "sgm_325m", 8), -+ GATE_ETH(CLK_ETH_WOCPU0_EN, "eth_wocpu0_en", "netsys_wed_mcu", 15), -+}; -+ -+static const struct mtk_clk_desc eth_desc = { -+ .clks = eth_clks, -+ .num_clks = ARRAY_SIZE(eth_clks), -+}; -+ -+static const struct mtk_clk_desc sgmii0_desc = { -+ .clks = sgmii0_clks, -+ .num_clks = ARRAY_SIZE(sgmii0_clks), -+}; -+ -+static const struct mtk_clk_desc sgmii1_desc = { -+ .clks = sgmii1_clks, -+ .num_clks = ARRAY_SIZE(sgmii1_clks), -+}; -+ -+static const struct of_device_id of_match_clk_mt7981_eth[] = { -+ { .compatible = "mediatek,mt7981-ethsys", .data = ð_desc }, -+ { .compatible = "mediatek,mt7981-sgmiisys_0", .data = &sgmii0_desc }, -+ { .compatible = "mediatek,mt7981-sgmiisys_1", .data = &sgmii1_desc }, -+ { /* sentinel */ } -+}; -+ -+static struct platform_driver clk_mt7981_eth_drv = { -+ .probe = mtk_clk_simple_probe, -+ .remove = mtk_clk_simple_remove, -+ .driver = { -+ .name = "clk-mt7981-eth", -+ .of_match_table = of_match_clk_mt7981_eth, -+ }, -+}; -+module_platform_driver(clk_mt7981_eth_drv); -+MODULE_LICENSE("GPL v2"); ---- /dev/null -+++ b/drivers/clk/mediatek/clk-mt7981-infracfg.c -@@ -0,0 +1,207 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright (c) 2021 MediaTek Inc. -+ * Author: Sam Shih -+ * Author: Wenzhen Yu -+ * Author: Jianhui Zhao -+ * Author: Daniel Golle -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include "clk-mtk.h" -+#include "clk-gate.h" -+#include "clk-mux.h" -+ -+#include -+#include -+ -+static DEFINE_SPINLOCK(mt7981_clk_lock); -+ -+static const struct mtk_fixed_factor infra_divs[] = { -+ FACTOR(CLK_INFRA_66M_MCK, "infra_66m_mck", "sysaxi_sel", 1, 2), -+}; -+ -+static const char *const infra_uart_parent[] __initconst = { "csw_f26m_sel", -+ "uart_sel" }; -+ -+static const char *const infra_spi0_parents[] __initconst = { "i2c_sel", -+ "spi_sel" }; -+ -+static const char *const infra_spi1_parents[] __initconst = { "i2c_sel", -+ "spim_mst_sel" }; -+ -+static const char *const infra_pwm1_parents[] __initconst = { "pwm_sel" }; -+ -+static const char *const infra_pwm_bsel_parents[] __initconst = { -+ "cb_rtc_32p7k", "csw_f26m_sel", "infra_66m_mck", "pwm_sel" -+}; -+ -+static const char *const infra_pcie_parents[] __initconst = { -+ "cb_rtc_32p7k", "csw_f26m_sel", "cb_cksq_40m", "pextp_tl_ck_sel" -+}; -+ -+static const struct mtk_mux infra_muxes[] = { -+ /* MODULE_CLK_SEL_0 */ -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_UART0_SEL, "infra_uart0_sel", -+ infra_uart_parent, 0x0018, 0x0010, 0x0014, 0, 1, -+ -1, -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_UART1_SEL, "infra_uart1_sel", -+ infra_uart_parent, 0x0018, 0x0010, 0x0014, 1, 1, -+ -1, -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_UART2_SEL, "infra_uart2_sel", -+ infra_uart_parent, 0x0018, 0x0010, 0x0014, 2, 1, -+ -1, -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_SPI0_SEL, "infra_spi0_sel", -+ infra_spi0_parents, 0x0018, 0x0010, 0x0014, 4, 1, -+ -1, -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_SPI1_SEL, "infra_spi1_sel", -+ infra_spi1_parents, 0x0018, 0x0010, 0x0014, 5, 1, -+ -1, -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_SPI2_SEL, "infra_spi2_sel", -+ infra_spi0_parents, 0x0018, 0x0010, 0x0014, 6, 1, -+ -1, -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM1_SEL, "infra_pwm1_sel", -+ infra_pwm1_parents, 0x0018, 0x0010, 0x0014, 9, 1, -+ -1, -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM2_SEL, "infra_pwm2_sel", -+ infra_pwm1_parents, 0x0018, 0x0010, 0x0014, 11, 1, -+ -1, -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM3_SEL, "infra_pwm3_sel", -+ infra_pwm1_parents, 0x0018, 0x0010, 0x0014, 15, 1, -+ -1, -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM_BSEL, "infra_pwm_bsel", -+ infra_pwm_bsel_parents, 0x0018, 0x0010, 0x0014, 13, -+ 2, -1, -1, -1), -+ /* MODULE_CLK_SEL_1 */ -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_PCIE_SEL, "infra_pcie_sel", -+ infra_pcie_parents, 0x0028, 0x0020, 0x0024, 0, 2, -+ -1, -1, -1), -+}; -+ -+static const struct mtk_gate_regs infra0_cg_regs = { -+ .set_ofs = 0x40, -+ .clr_ofs = 0x44, -+ .sta_ofs = 0x48, -+}; -+ -+static const struct mtk_gate_regs infra1_cg_regs = { -+ .set_ofs = 0x50, -+ .clr_ofs = 0x54, -+ .sta_ofs = 0x58, -+}; -+ -+static const struct mtk_gate_regs infra2_cg_regs = { -+ .set_ofs = 0x60, -+ .clr_ofs = 0x64, -+ .sta_ofs = 0x68, -+}; -+ -+#define GATE_INFRA0(_id, _name, _parent, _shift) \ -+ { \ -+ .id = _id, .name = _name, .parent_name = _parent, \ -+ .regs = &infra0_cg_regs, .shift = _shift, \ -+ .ops = &mtk_clk_gate_ops_setclr, \ -+ } -+ -+#define GATE_INFRA1(_id, _name, _parent, _shift) \ -+ { \ -+ .id = _id, .name = _name, .parent_name = _parent, \ -+ .regs = &infra1_cg_regs, .shift = _shift, \ -+ .ops = &mtk_clk_gate_ops_setclr, \ -+ } -+ -+#define GATE_INFRA2(_id, _name, _parent, _shift) \ -+ { \ -+ .id = _id, .name = _name, .parent_name = _parent, \ -+ .regs = &infra2_cg_regs, .shift = _shift, \ -+ .ops = &mtk_clk_gate_ops_setclr, \ -+ } -+ -+static const struct mtk_gate infra_clks[] = { -+ /* INFRA0 */ -+ GATE_INFRA0(CLK_INFRA_GPT_STA, "infra_gpt_sta", "infra_66m_mck", 0), -+ GATE_INFRA0(CLK_INFRA_PWM_HCK, "infra_pwm_hck", "infra_66m_mck", 1), -+ GATE_INFRA0(CLK_INFRA_PWM_STA, "infra_pwm_sta", "infra_pwm_bsel", 2), -+ GATE_INFRA0(CLK_INFRA_PWM1_CK, "infra_pwm1", "infra_pwm1_sel", 3), -+ GATE_INFRA0(CLK_INFRA_PWM2_CK, "infra_pwm2", "infra_pwm2_sel", 4), -+ GATE_INFRA0(CLK_INFRA_CQ_DMA_CK, "infra_cq_dma", "sysaxi", 6), -+ -+ GATE_INFRA0(CLK_INFRA_AUD_BUS_CK, "infra_aud_bus", "sysaxi", 8), -+ GATE_INFRA0(CLK_INFRA_AUD_26M_CK, "infra_aud_26m", "csw_f26m_sel", 9), -+ GATE_INFRA0(CLK_INFRA_AUD_L_CK, "infra_aud_l", "aud_l", 10), -+ GATE_INFRA0(CLK_INFRA_AUD_AUD_CK, "infra_aud_aud", "a1sys", 11), -+ GATE_INFRA0(CLK_INFRA_AUD_EG2_CK, "infra_aud_eg2", "a_tuner", 13), -+ GATE_INFRA0(CLK_INFRA_DRAMC_26M_CK, "infra_dramc_26m", "csw_f26m_sel", -+ 14), -+ GATE_INFRA0(CLK_INFRA_DBG_CK, "infra_dbg", "infra_66m_mck", 15), -+ GATE_INFRA0(CLK_INFRA_AP_DMA_CK, "infra_ap_dma", "infra_66m_mck", 16), -+ GATE_INFRA0(CLK_INFRA_SEJ_CK, "infra_sej", "infra_66m_mck", 24), -+ GATE_INFRA0(CLK_INFRA_SEJ_13M_CK, "infra_sej_13m", "csw_f26m_sel", 25), -+ GATE_INFRA0(CLK_INFRA_PWM3_CK, "infra_pwm3", "infra_pwm3_sel", 27), -+ /* INFRA1 */ -+ GATE_INFRA1(CLK_INFRA_THERM_CK, "infra_therm", "csw_f26m_sel", 0), -+ GATE_INFRA1(CLK_INFRA_I2C0_CK, "infra_i2c0", "i2c_bck", 1), -+ GATE_INFRA1(CLK_INFRA_UART0_CK, "infra_uart0", "infra_uart0_sel", 2), -+ GATE_INFRA1(CLK_INFRA_UART1_CK, "infra_uart1", "infra_uart1_sel", 3), -+ GATE_INFRA1(CLK_INFRA_UART2_CK, "infra_uart2", "infra_uart2_sel", 4), -+ GATE_INFRA1(CLK_INFRA_SPI2_CK, "infra_spi2", "infra_spi2_sel", 6), -+ GATE_INFRA1(CLK_INFRA_SPI2_HCK_CK, "infra_spi2_hck", "infra_66m_mck", 7), -+ GATE_INFRA1(CLK_INFRA_NFI1_CK, "infra_nfi1", "nfi1x", 8), -+ GATE_INFRA1(CLK_INFRA_SPINFI1_CK, "infra_spinfi1", "spinfi_bck", 9), -+ GATE_INFRA1(CLK_INFRA_NFI_HCK_CK, "infra_nfi_hck", "infra_66m_mck", 10), -+ GATE_INFRA1(CLK_INFRA_SPI0_CK, "infra_spi0", "infra_spi0_sel", 11), -+ GATE_INFRA1(CLK_INFRA_SPI1_CK, "infra_spi1", "infra_spi1_sel", 12), -+ GATE_INFRA1(CLK_INFRA_SPI0_HCK_CK, "infra_spi0_hck", "infra_66m_mck", -+ 13), -+ GATE_INFRA1(CLK_INFRA_SPI1_HCK_CK, "infra_spi1_hck", "infra_66m_mck", -+ 14), -+ GATE_INFRA1(CLK_INFRA_FRTC_CK, "infra_frtc", "cb_rtc_32k", 15), -+ GATE_INFRA1(CLK_INFRA_MSDC_CK, "infra_msdc", "emmc_400m", 16), -+ GATE_INFRA1(CLK_INFRA_MSDC_HCK_CK, "infra_msdc_hck", "emmc_208m", 17), -+ GATE_INFRA1(CLK_INFRA_MSDC_133M_CK, "infra_msdc_133m", "sysaxi", 18), -+ GATE_INFRA1(CLK_INFRA_MSDC_66M_CK, "infra_msdc_66m", "sysaxi", 19), -+ GATE_INFRA1(CLK_INFRA_ADC_26M_CK, "infra_adc_26m", "infra_adc_frc", 20), -+ GATE_INFRA1(CLK_INFRA_ADC_FRC_CK, "infra_adc_frc", "csw_f26m", 21), -+ GATE_INFRA1(CLK_INFRA_FBIST2FPC_CK, "infra_fbist2fpc", "nfi1x", 23), -+ GATE_INFRA1(CLK_INFRA_I2C_MCK_CK, "infra_i2c_mck", "sysaxi", 25), -+ GATE_INFRA1(CLK_INFRA_I2C_PCK_CK, "infra_i2c_pck", "infra_66m_mck", 26), -+ /* INFRA2 */ -+ GATE_INFRA2(CLK_INFRA_IUSB_133_CK, "infra_iusb_133", "sysaxi", 0), -+ GATE_INFRA2(CLK_INFRA_IUSB_66M_CK, "infra_iusb_66m", "sysaxi", 1), -+ GATE_INFRA2(CLK_INFRA_IUSB_SYS_CK, "infra_iusb_sys", "u2u3_sys", 2), -+ GATE_INFRA2(CLK_INFRA_IUSB_CK, "infra_iusb", "u2u3_ref", 3), -+ GATE_INFRA2(CLK_INFRA_IPCIE_CK, "infra_ipcie", "pextp_tl", 12), -+ GATE_INFRA2(CLK_INFRA_IPCIE_PIPE_CK, "infra_ipcie_pipe", "cb_cksq_40m", -+ 13), -+ GATE_INFRA2(CLK_INFRA_IPCIER_CK, "infra_ipcier", "csw_f26m", 14), -+ GATE_INFRA2(CLK_INFRA_IPCIEB_CK, "infra_ipcieb", "sysaxi", 15), -+}; -+ -+static const struct mtk_clk_desc infracfg_desc = { -+ .factor_clks = infra_divs, -+ .num_factor_clks = ARRAY_SIZE(infra_divs), -+ .mux_clks = infra_muxes, -+ .num_mux_clks = ARRAY_SIZE(infra_muxes), -+ .clks = infra_clks, -+ .num_clks = ARRAY_SIZE(infra_clks), -+ .clk_lock = &mt7981_clk_lock, -+}; -+ -+static const struct of_device_id of_match_clk_mt7981_infracfg[] = { -+ { .compatible = "mediatek,mt7981-infracfg", .data = &infracfg_desc }, -+ { /* sentinel */ } -+}; -+ -+static struct platform_driver clk_mt7981_infracfg_drv = { -+ .probe = mtk_clk_simple_probe, -+ .remove = mtk_clk_simple_remove, -+ .driver = { -+ .name = "clk-mt7981-infracfg", -+ .of_match_table = of_match_clk_mt7981_infracfg, -+ }, -+}; -+builtin_platform_driver(clk_mt7981_infracfg_drv); ---- /dev/null -+++ b/drivers/clk/mediatek/clk-mt7981-topckgen.c -@@ -0,0 +1,422 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright (c) 2021 MediaTek Inc. -+ * Author: Sam Shih -+ * Author: Wenzhen Yu -+ * Author: Jianhui Zhao -+ */ -+ -+ -+#include -+#include -+#include -+#include -+#include -+#include "clk-mtk.h" -+#include "clk-gate.h" -+#include "clk-mux.h" -+ -+#include -+#include -+ -+static DEFINE_SPINLOCK(mt7981_clk_lock); -+ -+static const struct mtk_fixed_factor top_divs[] = { -+ FACTOR(CLK_TOP_CB_CKSQ_40M, "cb_cksq_40m", "clkxtal", 1, 1), -+ FACTOR(CLK_TOP_CB_M_416M, "cb_m_416m", "mpll", 1, 1), -+ FACTOR(CLK_TOP_CB_M_D2, "cb_m_d2", "mpll", 1, 2), -+ FACTOR(CLK_TOP_CB_M_D3, "cb_m_d3", "mpll", 1, 3), -+ FACTOR(CLK_TOP_M_D3_D2, "m_d3_d2", "mpll", 1, 2), -+ FACTOR(CLK_TOP_CB_M_D4, "cb_m_d4", "mpll", 1, 4), -+ FACTOR(CLK_TOP_CB_M_D8, "cb_m_d8", "mpll", 1, 8), -+ FACTOR(CLK_TOP_M_D8_D2, "m_d8_d2", "mpll", 1, 16), -+ FACTOR(CLK_TOP_CB_MM_720M, "cb_mm_720m", "mmpll", 1, 1), -+ FACTOR(CLK_TOP_CB_MM_D2, "cb_mm_d2", "mmpll", 1, 2), -+ FACTOR(CLK_TOP_CB_MM_D3, "cb_mm_d3", "mmpll", 1, 3), -+ FACTOR(CLK_TOP_CB_MM_D3_D5, "cb_mm_d3_d5", "mmpll", 1, 15), -+ FACTOR(CLK_TOP_CB_MM_D4, "cb_mm_d4", "mmpll", 1, 4), -+ FACTOR(CLK_TOP_CB_MM_D6, "cb_mm_d6", "mmpll", 1, 6), -+ FACTOR(CLK_TOP_MM_D6_D2, "mm_d6_d2", "mmpll", 1, 12), -+ FACTOR(CLK_TOP_CB_MM_D8, "cb_mm_d8", "mmpll", 1, 8), -+ FACTOR(CLK_TOP_CB_APLL2_196M, "cb_apll2_196m", "apll2", 1, 1), -+ FACTOR(CLK_TOP_APLL2_D2, "apll2_d2", "apll2", 1, 2), -+ FACTOR(CLK_TOP_APLL2_D4, "apll2_d4", "apll2", 1, 4), -+ FACTOR(CLK_TOP_NET1_2500M, "net1_2500m", "net1pll", 1, 1), -+ FACTOR(CLK_TOP_CB_NET1_D4, "cb_net1_d4", "net1pll", 1, 4), -+ FACTOR(CLK_TOP_CB_NET1_D5, "cb_net1_d5", "net1pll", 1, 5), -+ FACTOR(CLK_TOP_NET1_D5_D2, "net1_d5_d2", "net1pll", 1, 10), -+ FACTOR(CLK_TOP_NET1_D5_D4, "net1_d5_d4", "net1pll", 1, 20), -+ FACTOR(CLK_TOP_CB_NET1_D8, "cb_net1_d8", "net1pll", 1, 8), -+ FACTOR(CLK_TOP_NET1_D8_D2, "net1_d8_d2", "net1pll", 1, 16), -+ FACTOR(CLK_TOP_NET1_D8_D4, "net1_d8_d4", "net1pll", 1, 32), -+ FACTOR(CLK_TOP_CB_NET2_800M, "cb_net2_800m", "net2pll", 1, 1), -+ FACTOR(CLK_TOP_CB_NET2_D2, "cb_net2_d2", "net2pll", 1, 2), -+ FACTOR(CLK_TOP_CB_NET2_D4, "cb_net2_d4", "net2pll", 1, 4), -+ FACTOR(CLK_TOP_NET2_D4_D2, "net2_d4_d2", "net2pll", 1, 8), -+ FACTOR(CLK_TOP_NET2_D4_D4, "net2_d4_d4", "net2pll", 1, 16), -+ FACTOR(CLK_TOP_CB_NET2_D6, "cb_net2_d6", "net2pll", 1, 6), -+ FACTOR(CLK_TOP_CB_WEDMCU_208M, "cb_wedmcu_208m", "wedmcupll", 1, 1), -+ FACTOR(CLK_TOP_CB_SGM_325M, "cb_sgm_325m", "sgmpll", 1, 1), -+ FACTOR(CLK_TOP_CKSQ_40M_D2, "cksq_40m_d2", "cb_cksq_40m", 1, 2), -+ FACTOR(CLK_TOP_CB_RTC_32K, "cb_rtc_32k", "cb_cksq_40m", 1, 1250), -+ FACTOR(CLK_TOP_CB_RTC_32P7K, "cb_rtc_32p7k", "cb_cksq_40m", 1, 1220), -+ FACTOR(CLK_TOP_USB_TX250M, "usb_tx250m", "cb_cksq_40m", 1, 1), -+ FACTOR(CLK_TOP_FAUD, "faud", "aud_sel", 1, 1), -+ FACTOR(CLK_TOP_NFI1X, "nfi1x", "nfi1x_sel", 1, 1), -+ FACTOR(CLK_TOP_USB_EQ_RX250M, "usb_eq_rx250m", "cb_cksq_40m", 1, 1), -+ FACTOR(CLK_TOP_USB_CDR_CK, "usb_cdr", "cb_cksq_40m", 1, 1), -+ FACTOR(CLK_TOP_USB_LN0_CK, "usb_ln0", "cb_cksq_40m", 1, 1), -+ FACTOR(CLK_TOP_SPINFI_BCK, "spinfi_bck", "spinfi_sel", 1, 1), -+ FACTOR(CLK_TOP_SPI, "spi", "spi_sel", 1, 1), -+ FACTOR(CLK_TOP_SPIM_MST, "spim_mst", "spim_mst_sel", 1, 1), -+ FACTOR(CLK_TOP_UART_BCK, "uart_bck", "uart_sel", 1, 1), -+ FACTOR(CLK_TOP_PWM_BCK, "pwm_bck", "pwm_sel", 1, 1), -+ FACTOR(CLK_TOP_I2C_BCK, "i2c_bck", "i2c_sel", 1, 1), -+ FACTOR(CLK_TOP_PEXTP_TL, "pextp_tl", "pextp_tl_ck_sel", 1, 1), -+ FACTOR(CLK_TOP_EMMC_208M, "emmc_208m", "emmc_208m_sel", 1, 1), -+ FACTOR(CLK_TOP_EMMC_400M, "emmc_400m", "emmc_400m_sel", 1, 1), -+ FACTOR(CLK_TOP_DRAMC_REF, "dramc_ref", "dramc_sel", 1, 1), -+ FACTOR(CLK_TOP_DRAMC_MD32, "dramc_md32", "dramc_md32_sel", 1, 1), -+ FACTOR(CLK_TOP_SYSAXI, "sysaxi", "sysaxi_sel", 1, 1), -+ FACTOR(CLK_TOP_SYSAPB, "sysapb", "sysapb_sel", 1, 1), -+ FACTOR(CLK_TOP_ARM_DB_MAIN, "arm_db_main", "arm_db_main_sel", 1, 1), -+ FACTOR(CLK_TOP_AP2CNN_HOST, "ap2cnn_host", "ap2cnn_host_sel", 1, 1), -+ FACTOR(CLK_TOP_NETSYS, "netsys", "netsys_sel", 1, 1), -+ FACTOR(CLK_TOP_NETSYS_500M, "netsys_500m", "netsys_500m_sel", 1, 1), -+ FACTOR(CLK_TOP_NETSYS_WED_MCU, "netsys_wed_mcu", "netsys_mcu_sel", 1, 1), -+ FACTOR(CLK_TOP_NETSYS_2X, "netsys_2x", "netsys_2x_sel", 1, 1), -+ FACTOR(CLK_TOP_SGM_325M, "sgm_325m", "sgm_325m_sel", 1, 1), -+ FACTOR(CLK_TOP_SGM_REG, "sgm_reg", "sgm_reg_sel", 1, 1), -+ FACTOR(CLK_TOP_F26M, "csw_f26m", "csw_f26m_sel", 1, 1), -+ FACTOR(CLK_TOP_EIP97B, "eip97b", "eip97b_sel", 1, 1), -+ FACTOR(CLK_TOP_USB3_PHY, "usb3_phy", "usb3_phy_sel", 1, 1), -+ FACTOR(CLK_TOP_AUD, "aud", "faud", 1, 1), -+ FACTOR(CLK_TOP_A1SYS, "a1sys", "a1sys_sel", 1, 1), -+ FACTOR(CLK_TOP_AUD_L, "aud_l", "aud_l_sel", 1, 1), -+ FACTOR(CLK_TOP_A_TUNER, "a_tuner", "a_tuner_sel", 1, 1), -+ FACTOR(CLK_TOP_U2U3_REF, "u2u3_ref", "u2u3_sel", 1, 1), -+ FACTOR(CLK_TOP_U2U3_SYS, "u2u3_sys", "u2u3_sys_sel", 1, 1), -+ FACTOR(CLK_TOP_U2U3_XHCI, "u2u3_xhci", "u2u3_xhci_sel", 1, 1), -+ FACTOR(CLK_TOP_USB_FRMCNT, "usb_frmcnt", "usb_frmcnt_sel", 1, 1), -+}; -+ -+static const char * const nfi1x_parents[] __initconst = { -+ "cb_cksq_40m", -+ "cb_mm_d4", -+ "net1_d8_d2", -+ "cb_net2_d6", -+ "cb_m_d4", -+ "cb_mm_d8", -+ "net1_d8_d4", -+ "cb_m_d8" -+}; -+ -+static const char * const spinfi_parents[] __initconst = { -+ "cksq_40m_d2", -+ "cb_cksq_40m", -+ "net1_d5_d4", -+ "cb_m_d4", -+ "cb_mm_d8", -+ "net1_d8_d4", -+ "mm_d6_d2", -+ "cb_m_d8" -+}; -+ -+static const char * const spi_parents[] __initconst = { -+ "cb_cksq_40m", -+ "cb_m_d2", -+ "cb_mm_d4", -+ "net1_d8_d2", -+ "cb_net2_d6", -+ "net1_d5_d4", -+ "cb_m_d4", -+ "net1_d8_d4" -+}; -+ -+static const char * const uart_parents[] __initconst = { -+ "cb_cksq_40m", -+ "cb_m_d8", -+ "m_d8_d2" -+}; -+ -+static const char * const pwm_parents[] __initconst = { -+ "cb_cksq_40m", -+ "net1_d8_d2", -+ "net1_d5_d4", -+ "cb_m_d4", -+ "m_d8_d2", -+ "cb_rtc_32k" -+}; -+ -+static const char * const i2c_parents[] __initconst = { -+ "cb_cksq_40m", -+ "net1_d5_d4", -+ "cb_m_d4", -+ "net1_d8_d4" -+}; -+ -+static const char * const pextp_tl_ck_parents[] __initconst = { -+ "cb_cksq_40m", -+ "net1_d5_d4", -+ "cb_m_d4", -+ "cb_rtc_32k" -+}; -+ -+static const char * const emmc_208m_parents[] __initconst = { -+ "cb_cksq_40m", -+ "cb_m_d2", -+ "cb_net2_d4", -+ "cb_apll2_196m", -+ "cb_mm_d4", -+ "net1_d8_d2", -+ "cb_mm_d6" -+}; -+ -+static const char * const emmc_400m_parents[] __initconst = { -+ "cb_cksq_40m", -+ "cb_net2_d2", -+ "cb_mm_d2", -+ "cb_net2_d2" -+}; -+ -+static const char * const csw_f26m_parents[] __initconst = { -+ "cksq_40m_d2", -+ "m_d8_d2" -+}; -+ -+static const char * const dramc_md32_parents[] __initconst = { -+ "cb_cksq_40m", -+ "cb_m_d2", -+ "cb_wedmcu_208m" -+}; -+ -+static const char * const sysaxi_parents[] __initconst = { -+ "cb_cksq_40m", -+ "net1_d8_d2" -+}; -+ -+static const char * const sysapb_parents[] __initconst = { -+ "cb_cksq_40m", -+ "m_d3_d2" -+}; -+ -+static const char * const arm_db_main_parents[] __initconst = { -+ "cb_cksq_40m", -+ "cb_net2_d6" -+}; -+ -+static const char * const ap2cnn_host_parents[] __initconst = { -+ "cb_cksq_40m", -+ "net1_d8_d4" -+}; -+ -+static const char * const netsys_parents[] __initconst = { -+ "cb_cksq_40m", -+ "cb_mm_d2" -+}; -+ -+static const char * const netsys_500m_parents[] __initconst = { -+ "cb_cksq_40m", -+ "cb_net1_d5" -+}; -+ -+static const char * const netsys_mcu_parents[] __initconst = { -+ "cb_cksq_40m", -+ "cb_mm_720m", -+ "cb_net1_d4", -+ "cb_net1_d5", -+ "cb_m_416m" -+}; -+ -+static const char * const netsys_2x_parents[] __initconst = { -+ "cb_cksq_40m", -+ "cb_net2_800m", -+ "cb_mm_720m" -+}; -+ -+static const char * const sgm_325m_parents[] __initconst = { -+ "cb_cksq_40m", -+ "cb_sgm_325m" -+}; -+ -+static const char * const sgm_reg_parents[] __initconst = { -+ "cb_cksq_40m", -+ "cb_net2_d4" -+}; -+ -+static const char * const eip97b_parents[] __initconst = { -+ "cb_cksq_40m", -+ "cb_net1_d5", -+ "cb_m_416m", -+ "cb_mm_d2", -+ "net1_d5_d2" -+}; -+ -+static const char * const aud_parents[] __initconst = { -+ "cb_cksq_40m", -+ "cb_apll2_196m" -+}; -+ -+static const char * const a1sys_parents[] __initconst = { -+ "cb_cksq_40m", -+ "apll2_d4" -+}; -+ -+static const char * const aud_l_parents[] __initconst = { -+ "cb_cksq_40m", -+ "cb_apll2_196m", -+ "m_d8_d2" -+}; -+ -+static const char * const a_tuner_parents[] __initconst = { -+ "cb_cksq_40m", -+ "apll2_d4", -+ "m_d8_d2" -+}; -+ -+static const char * const u2u3_parents[] __initconst = { -+ "cb_cksq_40m", -+ "m_d8_d2" -+}; -+ -+static const char * const u2u3_sys_parents[] __initconst = { -+ "cb_cksq_40m", -+ "net1_d5_d4" -+}; -+ -+static const char * const usb_frmcnt_parents[] __initconst = { -+ "cb_cksq_40m", -+ "cb_mm_d3_d5" -+}; -+ -+static const struct mtk_mux top_muxes[] = { -+ /* CLK_CFG_0 */ -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_NFI1X_SEL, "nfi1x_sel", nfi1x_parents, -+ 0x000, 0x004, 0x008, 0, 3, 7, 0x1C0, 0), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SPINFI_SEL, "spinfi_sel", spinfi_parents, -+ 0x000, 0x004, 0x008, 8, 3, 15, 0x1C0, 1), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SPI_SEL, "spi_sel", spi_parents, -+ 0x000, 0x004, 0x008, 16, 3, 23, 0x1C0, 2), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SPIM_MST_SEL, "spim_mst_sel", spi_parents, -+ 0x000, 0x004, 0x008, 24, 3, 31, 0x1C0, 3), -+ /* CLK_CFG_1 */ -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_UART_SEL, "uart_sel", uart_parents, -+ 0x010, 0x014, 0x018, 0, 2, 7, 0x1C0, 4), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_PWM_SEL, "pwm_sel", pwm_parents, -+ 0x010, 0x014, 0x018, 8, 3, 15, 0x1C0, 5), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_I2C_SEL, "i2c_sel", i2c_parents, -+ 0x010, 0x014, 0x018, 16, 2, 23, 0x1C0, 6), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_PEXTP_TL_SEL, "pextp_tl_ck_sel", -+ pextp_tl_ck_parents, 0x010, 0x014, 0x018, 24, 2, 31, -+ 0x1C0, 7), -+ /* CLK_CFG_2 */ -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_EMMC_208M_SEL, "emmc_208m_sel", -+ emmc_208m_parents, 0x020, 0x024, 0x028, 0, 3, 7, -+ 0x1C0, 8), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_EMMC_400M_SEL, "emmc_400m_sel", -+ emmc_400m_parents, 0x020, 0x024, 0x028, 8, 2, 15, -+ 0x1C0, 9), -+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_F26M_SEL, "csw_f26m_sel", -+ csw_f26m_parents, 0x020, 0x024, 0x028, 16, 1, 23, -+ 0x1C0, 10, -+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT), -+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_DRAMC_SEL, "dramc_sel", -+ csw_f26m_parents, 0x020, 0x024, 0x028, 24, 1, -+ 31, 0x1C0, 11, -+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT), -+ /* CLK_CFG_3 */ -+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_DRAMC_MD32_SEL, "dramc_md32_sel", -+ dramc_md32_parents, 0x030, 0x034, 0x038, 0, 2, -+ 7, 0x1C0, 12, -+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT), -+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SYSAXI_SEL, "sysaxi_sel", -+ sysaxi_parents, 0x030, 0x034, 0x038, 8, 1, 15, -+ 0x1C0, 13, -+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT), -+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SYSAPB_SEL, "sysapb_sel", -+ sysapb_parents, 0x030, 0x034, 0x038, 16, 1, -+ 23, 0x1C0, 14, -+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_ARM_DB_MAIN_SEL, "arm_db_main_sel", -+ arm_db_main_parents, 0x030, 0x034, 0x038, 24, 1, 31, -+ 0x1C0, 15), -+ /* CLK_CFG_4 */ -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_AP2CNN_HOST_SEL, "ap2cnn_host_sel", -+ ap2cnn_host_parents, 0x040, 0x044, 0x048, 0, 1, 7, -+ 0x1C0, 16), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_SEL, "netsys_sel", netsys_parents, -+ 0x040, 0x044, 0x048, 8, 1, 15, 0x1C0, 17), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_500M_SEL, "netsys_500m_sel", -+ netsys_500m_parents, 0x040, 0x044, 0x048, 16, 1, 23, -+ 0x1C0, 18), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_MCU_SEL, "netsys_mcu_sel", -+ netsys_mcu_parents, 0x040, 0x044, 0x048, 24, 3, 31, -+ 0x1C0, 19), -+ /* CLK_CFG_5 */ -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_2X_SEL, "netsys_2x_sel", -+ netsys_2x_parents, 0x050, 0x054, 0x058, 0, 2, 7, -+ 0x1C0, 20), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_325M_SEL, "sgm_325m_sel", -+ sgm_325m_parents, 0x050, 0x054, 0x058, 8, 1, 15, -+ 0x1C0, 21), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_REG_SEL, "sgm_reg_sel", sgm_reg_parents, -+ 0x050, 0x054, 0x058, 16, 1, 23, 0x1C0, 22), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_EIP97B_SEL, "eip97b_sel", eip97b_parents, -+ 0x050, 0x054, 0x058, 24, 3, 31, 0x1C0, 23), -+ /* CLK_CFG_6 */ -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_USB3_PHY_SEL, "usb3_phy_sel", -+ csw_f26m_parents, 0x060, 0x064, 0x068, 0, 1, -+ 7, 0x1C0, 24), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_AUD_SEL, "aud_sel", aud_parents, 0x060, -+ 0x064, 0x068, 8, 1, 15, 0x1C0, 25), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_A1SYS_SEL, "a1sys_sel", a1sys_parents, -+ 0x060, 0x064, 0x068, 16, 1, 23, 0x1C0, 26), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_AUD_L_SEL, "aud_l_sel", aud_l_parents, -+ 0x060, 0x064, 0x068, 24, 2, 31, 0x1C0, 27), -+ /* CLK_CFG_7 */ -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_A_TUNER_SEL, "a_tuner_sel", -+ a_tuner_parents, 0x070, 0x074, 0x078, 0, 2, 7, -+ 0x1C0, 28), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_U2U3_SEL, "u2u3_sel", u2u3_parents, 0x070, -+ 0x074, 0x078, 8, 1, 15, 0x1C0, 29), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_U2U3_SYS_SEL, "u2u3_sys_sel", -+ u2u3_sys_parents, 0x070, 0x074, 0x078, 16, 1, 23, -+ 0x1C0, 30), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_U2U3_XHCI_SEL, "u2u3_xhci_sel", -+ u2u3_sys_parents, 0x070, 0x074, 0x078, 24, 1, 31, -+ 0x1C4, 0), -+ /* CLK_CFG_8 */ -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_USB_FRMCNT_SEL, "usb_frmcnt_sel", -+ usb_frmcnt_parents, 0x080, 0x084, 0x088, 0, 1, 7, -+ 0x1C4, 1), -+}; -+ -+static struct mtk_composite top_aud_divs[] = { -+ DIV_GATE(CLK_TOP_AUD_I2S_M, "aud_i2s_m", "aud", -+ 0x0420, 0, 0x0420, 8, 8), -+}; -+ -+static const struct mtk_clk_desc topck_desc = { -+ .factor_clks = top_divs, -+ .num_factor_clks = ARRAY_SIZE(top_divs), -+ .mux_clks = top_muxes, -+ .num_mux_clks = ARRAY_SIZE(top_muxes), -+ .composite_clks = top_aud_divs, -+ .num_composite_clks = ARRAY_SIZE(top_aud_divs), -+ .clk_lock = &mt7981_clk_lock, -+}; -+ -+static const struct of_device_id of_match_clk_mt7981_topckgen[] = { -+ { .compatible = "mediatek,mt7981-topckgen", .data = &topck_desc }, -+ { /* sentinel */ } -+}; -+ -+static struct platform_driver clk_mt7981_topckgen_drv = { -+ .probe = mtk_clk_simple_probe, -+ .remove = mtk_clk_simple_remove, -+ .driver = { -+ .name = "clk-mt7981-topckgen", -+ .of_match_table = of_match_clk_mt7981_topckgen, -+ }, -+}; -+builtin_platform_driver(clk_mt7981_topckgen_drv); diff --git a/target/linux/mediatek/patches-6.1/232-clk-mediatek-mt7981-topckgen-flag-SGM_REG_SEL-as-cri.patch b/target/linux/mediatek/patches-6.1/232-clk-mediatek-mt7981-topckgen-flag-SGM_REG_SEL-as-cri.patch deleted file mode 100644 index 8820d57f01f..00000000000 --- a/target/linux/mediatek/patches-6.1/232-clk-mediatek-mt7981-topckgen-flag-SGM_REG_SEL-as-cri.patch +++ /dev/null @@ -1,30 +0,0 @@ -From fc157139e6b7f8dfb6430ac7191ba754027705e8 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Sun, 18 Feb 2024 01:59:59 +0000 -Subject: [PATCH] clk: mediatek: mt7981-topckgen: flag SGM_REG_SEL as critical - -Without the SGM_REG_SEL clock enabled the system freezes if trying to -access registers used by MT7981 clock drivers itself. -Mark SGM_REG_SEL as critical to make sure it is always enabled to -prevent freezes on boot depending on probe order. - -Fixes: 813c3b53b55ba ("clk: mediatek: add MT7981 clock support") -Signed-off-by: Daniel Golle ---- - drivers/clk/mediatek/clk-mt7981-topckgen.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - ---- a/drivers/clk/mediatek/clk-mt7981-topckgen.c -+++ b/drivers/clk/mediatek/clk-mt7981-topckgen.c -@@ -359,8 +359,9 @@ static const struct mtk_mux top_muxes[] - MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_325M_SEL, "sgm_325m_sel", - sgm_325m_parents, 0x050, 0x054, 0x058, 8, 1, 15, - 0x1C0, 21), -- MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_REG_SEL, "sgm_reg_sel", sgm_reg_parents, -- 0x050, 0x054, 0x058, 16, 1, 23, 0x1C0, 22), -+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SGM_REG_SEL, "sgm_reg_sel", sgm_reg_parents, -+ 0x050, 0x054, 0x058, 16, 1, 23, 0x1C0, 22, -+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT), - MUX_GATE_CLR_SET_UPD(CLK_TOP_EIP97B_SEL, "eip97b_sel", eip97b_parents, - 0x050, 0x054, 0x058, 24, 3, 31, 0x1C0, 23), - /* CLK_CFG_6 */ diff --git a/target/linux/mediatek/patches-6.1/240-pinctrl-mediatek-add-support-for-MT7988-SoC.patch b/target/linux/mediatek/patches-6.1/240-pinctrl-mediatek-add-support-for-MT7988-SoC.patch deleted file mode 100644 index a365f0860bb..00000000000 --- a/target/linux/mediatek/patches-6.1/240-pinctrl-mediatek-add-support-for-MT7988-SoC.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/pinctrl/mediatek/Kconfig -+++ b/drivers/pinctrl/mediatek/Kconfig -@@ -141,6 +141,13 @@ config PINCTRL_MT7986 - default ARM64 && ARCH_MEDIATEK - select PINCTRL_MTK_MOORE - -+config PINCTRL_MT7988 -+ bool "Mediatek MT7988 pin control" -+ depends on OF -+ depends on ARM64 || COMPILE_TEST -+ default ARCH_MEDIATEK -+ select PINCTRL_MTK_MOORE -+ - config PINCTRL_MT8167 - bool "Mediatek MT8167 pin control" - depends on OF ---- a/drivers/pinctrl/mediatek/Makefile -+++ b/drivers/pinctrl/mediatek/Makefile -@@ -20,6 +20,7 @@ obj-$(CONFIG_PINCTRL_MT7623) += pinctrl- - obj-$(CONFIG_PINCTRL_MT7629) += pinctrl-mt7629.o - obj-$(CONFIG_PINCTRL_MT7981) += pinctrl-mt7981.o - obj-$(CONFIG_PINCTRL_MT7986) += pinctrl-mt7986.o -+obj-$(CONFIG_PINCTRL_MT7988) += pinctrl-mt7988.o - obj-$(CONFIG_PINCTRL_MT8167) += pinctrl-mt8167.o - obj-$(CONFIG_PINCTRL_MT8173) += pinctrl-mt8173.o - obj-$(CONFIG_PINCTRL_MT8183) += pinctrl-mt8183.o diff --git a/target/linux/mediatek/patches-6.1/241-v6.3-dt-bindings-clock-Add-compatibles-for-MT7981.patch b/target/linux/mediatek/patches-6.1/241-v6.3-dt-bindings-clock-Add-compatibles-for-MT7981.patch deleted file mode 100644 index ad4ecdf83ff..00000000000 --- a/target/linux/mediatek/patches-6.1/241-v6.3-dt-bindings-clock-Add-compatibles-for-MT7981.patch +++ /dev/null @@ -1,75 +0,0 @@ -From cc4d9e0c77494fcf6bccbc57e23db0007cf681b7 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Thu, 26 Jan 2023 03:33:46 +0000 -Subject: [PATCH] dt-bindings: clock: Add compatibles for MT7981 - -Add compatible string for MT7981 to existing bindings at - - mediatek,apmixedsys.yaml - - mediatek,topckgen.yaml - - mediatek,ethsys.txt - - mediatek,infracfg.yaml - - mediatek,sgmiisys.txt - -Signed-off-by: Jianhui Zhao -Signed-off-by: Daniel Golle -Link: https://lore.kernel.org/r/cc85ee470c781ff4013f6c21c92c0a21574b12b2.1674703830.git.daniel@makrotopia.org -Signed-off-by: Stephen Boyd ---- - .../devicetree/bindings/arm/mediatek/mediatek,ethsys.txt | 1 + - .../devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml | 1 + - .../devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt | 2 ++ - .../devicetree/bindings/clock/mediatek,apmixedsys.yaml | 1 + - Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml | 1 + - 5 files changed, 6 insertions(+) - ---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt -+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt -@@ -10,6 +10,7 @@ Required Properties: - - "mediatek,mt7622-ethsys", "syscon" - - "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon" - - "mediatek,mt7629-ethsys", "syscon" -+ - "mediatek,mt7981-ethsys", "syscon" - - "mediatek,mt7986-ethsys", "syscon" - - #clock-cells: Must be 1 - - #reset-cells: Must be 1 ---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml -+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml -@@ -28,6 +28,7 @@ properties: - - mediatek,mt6797-infracfg - - mediatek,mt7622-infracfg - - mediatek,mt7629-infracfg -+ - mediatek,mt7981-infracfg - - mediatek,mt7986-infracfg - - mediatek,mt8135-infracfg - - mediatek,mt8167-infracfg ---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt -+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt -@@ -8,6 +8,8 @@ Required Properties: - - compatible: Should be: - - "mediatek,mt7622-sgmiisys", "syscon" - - "mediatek,mt7629-sgmiisys", "syscon" -+ - "mediatek,mt7981-sgmiisys_0", "syscon" -+ - "mediatek,mt7981-sgmiisys_1", "syscon" - - "mediatek,mt7986-sgmiisys_0", "syscon" - - "mediatek,mt7986-sgmiisys_1", "syscon" - - #clock-cells: Must be 1 ---- a/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml -+++ b/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml -@@ -20,6 +20,7 @@ properties: - - enum: - - mediatek,mt6797-apmixedsys - - mediatek,mt7622-apmixedsys -+ - mediatek,mt7981-apmixedsys - - mediatek,mt7986-apmixedsys - - mediatek,mt8135-apmixedsys - - mediatek,mt8173-apmixedsys ---- a/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml -+++ b/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml -@@ -35,6 +35,7 @@ properties: - - mediatek,mt6779-topckgen - - mediatek,mt6795-topckgen - - mediatek,mt7629-topckgen -+ - mediatek,mt7981-topckgen - - mediatek,mt7986-topckgen - - mediatek,mt8167-topckgen - - mediatek,mt8183-topckgen diff --git a/target/linux/mediatek/patches-6.1/242-v6.4-dt-bindings-arm-mediatek-sgmiisys-Convert-to-DT-sche.patch b/target/linux/mediatek/patches-6.1/242-v6.4-dt-bindings-arm-mediatek-sgmiisys-Convert-to-DT-sche.patch deleted file mode 100644 index 48d3d4e90ce..00000000000 --- a/target/linux/mediatek/patches-6.1/242-v6.4-dt-bindings-arm-mediatek-sgmiisys-Convert-to-DT-sche.patch +++ /dev/null @@ -1,107 +0,0 @@ -From d4f08a703565abf47baa5a77d05365cf4598d55c Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Sun, 19 Mar 2023 12:56:52 +0000 -Subject: [PATCH 1/2] dt-bindings: arm: mediatek: sgmiisys: Convert to DT - schema - -Convert mediatek,sgmiiisys bindings to DT schema format. -Add maintainer Matthias Brugger, no maintainers were listed in the -original documentation. -As this node is also referenced by the Ethernet controller and used -as SGMII PCS add this fact to the description. -Move the file to Documentation/devicetree/bindings/net/pcs/ which seems -more appropriate given that the great majority of registers are related -to SGMII PCS functionality and only one register represents clock bits. - -Reviewed-by: Rob Herring -Signed-off-by: Daniel Golle -Signed-off-by: Jakub Kicinski ---- - .../arm/mediatek/mediatek,sgmiisys.txt | 27 ---------- - .../bindings/net/pcs/mediatek,sgmiisys.yaml | 49 +++++++++++++++++++ - 2 files changed, 49 insertions(+), 27 deletions(-) - delete mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt - create mode 100644 Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml - ---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt -+++ /dev/null -@@ -1,27 +0,0 @@ --MediaTek SGMIISYS controller --============================ -- --The MediaTek SGMIISYS controller provides various clocks to the system. -- --Required Properties: -- --- compatible: Should be: -- - "mediatek,mt7622-sgmiisys", "syscon" -- - "mediatek,mt7629-sgmiisys", "syscon" -- - "mediatek,mt7981-sgmiisys_0", "syscon" -- - "mediatek,mt7981-sgmiisys_1", "syscon" -- - "mediatek,mt7986-sgmiisys_0", "syscon" -- - "mediatek,mt7986-sgmiisys_1", "syscon" --- #clock-cells: Must be 1 -- --The SGMIISYS controller uses the common clk binding from --Documentation/devicetree/bindings/clock/clock-bindings.txt --The available clocks are defined in dt-bindings/clock/mt*-clk.h. -- --Example: -- --sgmiisys: sgmiisys@1b128000 { -- compatible = "mediatek,mt7622-sgmiisys", "syscon"; -- reg = <0 0x1b128000 0 0x1000>; -- #clock-cells = <1>; --}; ---- /dev/null -+++ b/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml -@@ -0,0 +1,49 @@ -+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/net/pcs/mediatek,sgmiisys.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: MediaTek SGMIISYS Controller -+ -+maintainers: -+ - Matthias Brugger -+ -+description: -+ The MediaTek SGMIISYS controller provides a SGMII PCS and some clocks -+ to the ethernet subsystem to which it is attached. -+ -+properties: -+ compatible: -+ items: -+ - enum: -+ - mediatek,mt7622-sgmiisys -+ - mediatek,mt7629-sgmiisys -+ - mediatek,mt7986-sgmiisys_0 -+ - mediatek,mt7986-sgmiisys_1 -+ - const: syscon -+ -+ reg: -+ maxItems: 1 -+ -+ '#clock-cells': -+ const: 1 -+ -+required: -+ - compatible -+ - reg -+ - '#clock-cells' -+ -+additionalProperties: false -+ -+examples: -+ - | -+ soc { -+ #address-cells = <2>; -+ #size-cells = <2>; -+ sgmiisys: syscon@1b128000 { -+ compatible = "mediatek,mt7622-sgmiisys", "syscon"; -+ reg = <0 0x1b128000 0 0x1000>; -+ #clock-cells = <1>; -+ }; -+ }; diff --git a/target/linux/mediatek/patches-6.1/243-v6.4-dt-bindings-net-pcs-mediatek-sgmiisys-add-MT7981-SoC.patch b/target/linux/mediatek/patches-6.1/243-v6.4-dt-bindings-net-pcs-mediatek-sgmiisys-add-MT7981-SoC.patch deleted file mode 100644 index 62a64b9dd03..00000000000 --- a/target/linux/mediatek/patches-6.1/243-v6.4-dt-bindings-net-pcs-mediatek-sgmiisys-add-MT7981-SoC.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 4f7eb19c4f44078100659f6ba073b0cc7191bc91 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Sun, 19 Mar 2023 12:57:04 +0000 -Subject: [PATCH 2/2] dt-bindings: net: pcs: mediatek,sgmiisys: add MT7981 SoC - -Add mediatek,pnswap boolean property needed on many boards using the -MediaTek MT7981 SoC. - -Reviewed-by: Rob Herring -Signed-off-by: Daniel Golle -Signed-off-by: Jakub Kicinski ---- - .../devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml -+++ b/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml -@@ -19,6 +19,8 @@ properties: - - enum: - - mediatek,mt7622-sgmiisys - - mediatek,mt7629-sgmiisys -+ - mediatek,mt7981-sgmiisys_0 -+ - mediatek,mt7981-sgmiisys_1 - - mediatek,mt7986-sgmiisys_0 - - mediatek,mt7986-sgmiisys_1 - - const: syscon -@@ -29,6 +31,10 @@ properties: - '#clock-cells': - const: 1 - -+ mediatek,pnswap: -+ description: Invert polarity of the SGMII data lanes -+ type: boolean -+ - required: - - compatible - - reg diff --git a/target/linux/mediatek/patches-6.1/244-v6.8-dt-bindings-arm-mediatek-move-ethsys-controller-conv.patch b/target/linux/mediatek/patches-6.1/244-v6.8-dt-bindings-arm-mediatek-move-ethsys-controller-conv.patch deleted file mode 100644 index 946db82235c..00000000000 --- a/target/linux/mediatek/patches-6.1/244-v6.8-dt-bindings-arm-mediatek-move-ethsys-controller-conv.patch +++ /dev/null @@ -1,113 +0,0 @@ -From 94b0f301f6ee92f79a2fe2c655dfdbdfe2aec536 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Sun, 19 Nov 2023 22:24:16 +0100 -Subject: [PATCH] dt-bindings: arm: mediatek: move ethsys controller & convert - to DT schema -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -DT schema helps validating DTS files. Binding was moved to clock/ as -this hardware is a clock provider. Example required a small fix for -"reg" value (1 address cell + 1 size cell). - -Signed-off-by: RafaÅ‚ MiÅ‚ecki -Reviewed-by: Rob Herring -Link: https://lore.kernel.org/r/20231119212416.2682-1-zajec5@gmail.com -Signed-off-by: Stephen Boyd ---- - .../bindings/arm/mediatek/mediatek,ethsys.txt | 29 ---------- - .../bindings/clock/mediatek,ethsys.yaml | 54 +++++++++++++++++++ - 2 files changed, 54 insertions(+), 29 deletions(-) - delete mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt - create mode 100644 Documentation/devicetree/bindings/clock/mediatek,ethsys.yaml - ---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt -+++ /dev/null -@@ -1,29 +0,0 @@ --Mediatek ethsys controller --============================ -- --The Mediatek ethsys controller provides various clocks to the system. -- --Required Properties: -- --- compatible: Should be: -- - "mediatek,mt2701-ethsys", "syscon" -- - "mediatek,mt7622-ethsys", "syscon" -- - "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon" -- - "mediatek,mt7629-ethsys", "syscon" -- - "mediatek,mt7981-ethsys", "syscon" -- - "mediatek,mt7986-ethsys", "syscon" --- #clock-cells: Must be 1 --- #reset-cells: Must be 1 -- --The ethsys controller uses the common clk binding from --Documentation/devicetree/bindings/clock/clock-bindings.txt --The available clocks are defined in dt-bindings/clock/mt*-clk.h. -- --Example: -- --ethsys: clock-controller@1b000000 { -- compatible = "mediatek,mt2701-ethsys", "syscon"; -- reg = <0 0x1b000000 0 0x1000>; -- #clock-cells = <1>; -- #reset-cells = <1>; --}; ---- /dev/null -+++ b/Documentation/devicetree/bindings/clock/mediatek,ethsys.yaml -@@ -0,0 +1,54 @@ -+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/clock/mediatek,ethsys.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: Mediatek ethsys controller -+ -+description: -+ The available clocks are defined in dt-bindings/clock/mt*-clk.h. -+ -+maintainers: -+ - James Liao -+ -+properties: -+ compatible: -+ oneOf: -+ - items: -+ - enum: -+ - mediatek,mt2701-ethsys -+ - mediatek,mt7622-ethsys -+ - mediatek,mt7629-ethsys -+ - mediatek,mt7981-ethsys -+ - mediatek,mt7986-ethsys -+ - const: syscon -+ - items: -+ - const: mediatek,mt7623-ethsys -+ - const: mediatek,mt2701-ethsys -+ - const: syscon -+ -+ reg: -+ maxItems: 1 -+ -+ "#clock-cells": -+ const: 1 -+ -+ "#reset-cells": -+ const: 1 -+ -+required: -+ - reg -+ - "#clock-cells" -+ - "#reset-cells" -+ -+additionalProperties: false -+ -+examples: -+ - | -+ clock-controller@1b000000 { -+ compatible = "mediatek,mt2701-ethsys", "syscon"; -+ reg = <0x1b000000 0x1000>; -+ #clock-cells = <1>; -+ #reset-cells = <1>; -+ }; diff --git a/target/linux/mediatek/patches-6.1/245-v6.8-dt-bindings-reset-mediatek-add-MT7988-ethwarp-reset-.patch b/target/linux/mediatek/patches-6.1/245-v6.8-dt-bindings-reset-mediatek-add-MT7988-ethwarp-reset-.patch deleted file mode 100644 index 47f05e93c62..00000000000 --- a/target/linux/mediatek/patches-6.1/245-v6.8-dt-bindings-reset-mediatek-add-MT7988-ethwarp-reset-.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 5cfa3beb7761cb84be77225902e018d9d3f9b973 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Sun, 17 Dec 2023 21:49:45 +0000 -Subject: [PATCH 1/4] dt-bindings: reset: mediatek: add MT7988 ethwarp reset - IDs - -Add reset ID for ethwarp subsystem allowing to reset the built-in -Ethernet switch of the MediaTek MT7988 SoC. - -Signed-off-by: Daniel Golle -Reviewed-by: AngeloGioacchino Del Regno -Acked-by: Krzysztof Kozlowski -Link: https://lore.kernel.org/r/0c14bbacf471683af67ffa7572bfa1d5c45a0b5d.1702849494.git.daniel@makrotopia.org -Signed-off-by: Stephen Boyd ---- - include/dt-bindings/reset/mediatek,mt7988-resets.h | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - create mode 100644 include/dt-bindings/reset/mediatek,mt7988-resets.h - ---- /dev/null -+++ b/include/dt-bindings/reset/mediatek,mt7988-resets.h -@@ -0,0 +1,13 @@ -+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ -+/* -+ * Copyright (c) 2023 Daniel Golle -+ * Author: Daniel Golle -+ */ -+ -+#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT7988 -+#define _DT_BINDINGS_RESET_CONTROLLER_MT7988 -+ -+/* ETHWARP resets */ -+#define MT7988_ETHWARP_RST_SWITCH 0 -+ -+#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT7988 */ diff --git a/target/linux/mediatek/patches-6.1/246-v6.8-dt-bindings-clock-mediatek-add-MT7988-clock-IDs.patch b/target/linux/mediatek/patches-6.1/246-v6.8-dt-bindings-clock-mediatek-add-MT7988-clock-IDs.patch deleted file mode 100644 index cf5cae63410..00000000000 --- a/target/linux/mediatek/patches-6.1/246-v6.8-dt-bindings-clock-mediatek-add-MT7988-clock-IDs.patch +++ /dev/null @@ -1,302 +0,0 @@ -From 8187e001de156e99ef95366ffd10d627ed090826 Mon Sep 17 00:00:00 2001 -From: Sam Shih -Date: Sun, 17 Dec 2023 21:49:33 +0000 -Subject: [PATCH] dt-bindings: clock: mediatek: add MT7988 clock IDs - -Add MT7988 clock dt-bindings for topckgen, apmixedsys, infracfg, -ethernet and xfipll subsystem clocks. - -Signed-off-by: Sam Shih -Signed-off-by: Daniel Golle -Acked-by: Krzysztof Kozlowski -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/27f99db432e9ccc804cc5b6501d7d17d72cae879.1702849494.git.daniel@makrotopia.org -Signed-off-by: Stephen Boyd ---- - .../dt-bindings/clock/mediatek,mt7988-clk.h | 280 ++++++++++++++++++ - 1 file changed, 280 insertions(+) - create mode 100644 include/dt-bindings/clock/mediatek,mt7988-clk.h - ---- /dev/null -+++ b/include/dt-bindings/clock/mediatek,mt7988-clk.h -@@ -0,0 +1,280 @@ -+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ -+/* -+ * Copyright (c) 2023 MediaTek Inc. -+ * Author: Sam Shih -+ * Author: Xiufeng Li -+ */ -+ -+#ifndef _DT_BINDINGS_CLK_MT7988_H -+#define _DT_BINDINGS_CLK_MT7988_H -+ -+/* APMIXEDSYS */ -+ -+#define CLK_APMIXED_NETSYSPLL 0 -+#define CLK_APMIXED_MPLL 1 -+#define CLK_APMIXED_MMPLL 2 -+#define CLK_APMIXED_APLL2 3 -+#define CLK_APMIXED_NET1PLL 4 -+#define CLK_APMIXED_NET2PLL 5 -+#define CLK_APMIXED_WEDMCUPLL 6 -+#define CLK_APMIXED_SGMPLL 7 -+#define CLK_APMIXED_ARM_B 8 -+#define CLK_APMIXED_CCIPLL2_B 9 -+#define CLK_APMIXED_USXGMIIPLL 10 -+#define CLK_APMIXED_MSDCPLL 11 -+ -+/* TOPCKGEN */ -+ -+#define CLK_TOP_XTAL 0 -+#define CLK_TOP_XTAL_D2 1 -+#define CLK_TOP_RTC_32K 2 -+#define CLK_TOP_RTC_32P7K 3 -+#define CLK_TOP_MPLL_D2 4 -+#define CLK_TOP_MPLL_D3_D2 5 -+#define CLK_TOP_MPLL_D4 6 -+#define CLK_TOP_MPLL_D8 7 -+#define CLK_TOP_MPLL_D8_D2 8 -+#define CLK_TOP_MMPLL_D2 9 -+#define CLK_TOP_MMPLL_D3_D5 10 -+#define CLK_TOP_MMPLL_D4 11 -+#define CLK_TOP_MMPLL_D6_D2 12 -+#define CLK_TOP_MMPLL_D8 13 -+#define CLK_TOP_APLL2_D4 14 -+#define CLK_TOP_NET1PLL_D4 15 -+#define CLK_TOP_NET1PLL_D5 16 -+#define CLK_TOP_NET1PLL_D5_D2 17 -+#define CLK_TOP_NET1PLL_D5_D4 18 -+#define CLK_TOP_NET1PLL_D8 19 -+#define CLK_TOP_NET1PLL_D8_D2 20 -+#define CLK_TOP_NET1PLL_D8_D4 21 -+#define CLK_TOP_NET1PLL_D8_D8 22 -+#define CLK_TOP_NET1PLL_D8_D16 23 -+#define CLK_TOP_NET2PLL_D2 24 -+#define CLK_TOP_NET2PLL_D4 25 -+#define CLK_TOP_NET2PLL_D4_D4 26 -+#define CLK_TOP_NET2PLL_D4_D8 27 -+#define CLK_TOP_NET2PLL_D6 28 -+#define CLK_TOP_NET2PLL_D8 29 -+#define CLK_TOP_NETSYS_SEL 30 -+#define CLK_TOP_NETSYS_500M_SEL 31 -+#define CLK_TOP_NETSYS_2X_SEL 32 -+#define CLK_TOP_NETSYS_GSW_SEL 33 -+#define CLK_TOP_ETH_GMII_SEL 34 -+#define CLK_TOP_NETSYS_MCU_SEL 35 -+#define CLK_TOP_NETSYS_PAO_2X_SEL 36 -+#define CLK_TOP_EIP197_SEL 37 -+#define CLK_TOP_AXI_INFRA_SEL 38 -+#define CLK_TOP_UART_SEL 39 -+#define CLK_TOP_EMMC_250M_SEL 40 -+#define CLK_TOP_EMMC_400M_SEL 41 -+#define CLK_TOP_SPI_SEL 42 -+#define CLK_TOP_SPIM_MST_SEL 43 -+#define CLK_TOP_NFI1X_SEL 44 -+#define CLK_TOP_SPINFI_SEL 45 -+#define CLK_TOP_PWM_SEL 46 -+#define CLK_TOP_I2C_SEL 47 -+#define CLK_TOP_PCIE_MBIST_250M_SEL 48 -+#define CLK_TOP_PEXTP_TL_SEL 49 -+#define CLK_TOP_PEXTP_TL_P1_SEL 50 -+#define CLK_TOP_PEXTP_TL_P2_SEL 51 -+#define CLK_TOP_PEXTP_TL_P3_SEL 52 -+#define CLK_TOP_USB_SYS_SEL 53 -+#define CLK_TOP_USB_SYS_P1_SEL 54 -+#define CLK_TOP_USB_XHCI_SEL 55 -+#define CLK_TOP_USB_XHCI_P1_SEL 56 -+#define CLK_TOP_USB_FRMCNT_SEL 57 -+#define CLK_TOP_USB_FRMCNT_P1_SEL 58 -+#define CLK_TOP_AUD_SEL 59 -+#define CLK_TOP_A1SYS_SEL 60 -+#define CLK_TOP_AUD_L_SEL 61 -+#define CLK_TOP_A_TUNER_SEL 62 -+#define CLK_TOP_SSPXTP_SEL 63 -+#define CLK_TOP_USB_PHY_SEL 64 -+#define CLK_TOP_USXGMII_SBUS_0_SEL 65 -+#define CLK_TOP_USXGMII_SBUS_1_SEL 66 -+#define CLK_TOP_SGM_0_SEL 67 -+#define CLK_TOP_SGM_SBUS_0_SEL 68 -+#define CLK_TOP_SGM_1_SEL 69 -+#define CLK_TOP_SGM_SBUS_1_SEL 70 -+#define CLK_TOP_XFI_PHY_0_XTAL_SEL 71 -+#define CLK_TOP_XFI_PHY_1_XTAL_SEL 72 -+#define CLK_TOP_SYSAXI_SEL 73 -+#define CLK_TOP_SYSAPB_SEL 74 -+#define CLK_TOP_ETH_REFCK_50M_SEL 75 -+#define CLK_TOP_ETH_SYS_200M_SEL 76 -+#define CLK_TOP_ETH_SYS_SEL 77 -+#define CLK_TOP_ETH_XGMII_SEL 78 -+#define CLK_TOP_BUS_TOPS_SEL 79 -+#define CLK_TOP_NPU_TOPS_SEL 80 -+#define CLK_TOP_DRAMC_SEL 81 -+#define CLK_TOP_DRAMC_MD32_SEL 82 -+#define CLK_TOP_INFRA_F26M_SEL 83 -+#define CLK_TOP_PEXTP_P0_SEL 84 -+#define CLK_TOP_PEXTP_P1_SEL 85 -+#define CLK_TOP_PEXTP_P2_SEL 86 -+#define CLK_TOP_PEXTP_P3_SEL 87 -+#define CLK_TOP_DA_XTP_GLB_P0_SEL 88 -+#define CLK_TOP_DA_XTP_GLB_P1_SEL 89 -+#define CLK_TOP_DA_XTP_GLB_P2_SEL 90 -+#define CLK_TOP_DA_XTP_GLB_P3_SEL 91 -+#define CLK_TOP_CKM_SEL 92 -+#define CLK_TOP_DA_SEL 93 -+#define CLK_TOP_PEXTP_SEL 94 -+#define CLK_TOP_TOPS_P2_26M_SEL 95 -+#define CLK_TOP_MCUSYS_BACKUP_625M_SEL 96 -+#define CLK_TOP_NETSYS_SYNC_250M_SEL 97 -+#define CLK_TOP_MACSEC_SEL 98 -+#define CLK_TOP_NETSYS_TOPS_400M_SEL 99 -+#define CLK_TOP_NETSYS_PPEFB_250M_SEL 100 -+#define CLK_TOP_NETSYS_WARP_SEL 101 -+#define CLK_TOP_ETH_MII_SEL 102 -+#define CLK_TOP_NPU_SEL 103 -+#define CLK_TOP_AUD_I2S_M 104 -+ -+/* MCUSYS */ -+ -+#define CLK_MCU_BUS_DIV_SEL 0 -+#define CLK_MCU_ARM_DIV_SEL 1 -+ -+/* INFRACFG_AO */ -+ -+#define CLK_INFRA_MUX_UART0_SEL 0 -+#define CLK_INFRA_MUX_UART1_SEL 1 -+#define CLK_INFRA_MUX_UART2_SEL 2 -+#define CLK_INFRA_MUX_SPI0_SEL 3 -+#define CLK_INFRA_MUX_SPI1_SEL 4 -+#define CLK_INFRA_MUX_SPI2_SEL 5 -+#define CLK_INFRA_PWM_SEL 6 -+#define CLK_INFRA_PWM_CK1_SEL 7 -+#define CLK_INFRA_PWM_CK2_SEL 8 -+#define CLK_INFRA_PWM_CK3_SEL 9 -+#define CLK_INFRA_PWM_CK4_SEL 10 -+#define CLK_INFRA_PWM_CK5_SEL 11 -+#define CLK_INFRA_PWM_CK6_SEL 12 -+#define CLK_INFRA_PWM_CK7_SEL 13 -+#define CLK_INFRA_PWM_CK8_SEL 14 -+#define CLK_INFRA_PCIE_GFMUX_TL_O_P0_SEL 15 -+#define CLK_INFRA_PCIE_GFMUX_TL_O_P1_SEL 16 -+#define CLK_INFRA_PCIE_GFMUX_TL_O_P2_SEL 17 -+#define CLK_INFRA_PCIE_GFMUX_TL_O_P3_SEL 18 -+ -+/* INFRACFG */ -+ -+#define CLK_INFRA_PCIE_PERI_26M_CK_P0 19 -+#define CLK_INFRA_PCIE_PERI_26M_CK_P1 20 -+#define CLK_INFRA_PCIE_PERI_26M_CK_P2 21 -+#define CLK_INFRA_PCIE_PERI_26M_CK_P3 22 -+#define CLK_INFRA_66M_GPT_BCK 23 -+#define CLK_INFRA_66M_PWM_HCK 24 -+#define CLK_INFRA_66M_PWM_BCK 25 -+#define CLK_INFRA_66M_PWM_CK1 26 -+#define CLK_INFRA_66M_PWM_CK2 27 -+#define CLK_INFRA_66M_PWM_CK3 28 -+#define CLK_INFRA_66M_PWM_CK4 29 -+#define CLK_INFRA_66M_PWM_CK5 30 -+#define CLK_INFRA_66M_PWM_CK6 31 -+#define CLK_INFRA_66M_PWM_CK7 32 -+#define CLK_INFRA_66M_PWM_CK8 33 -+#define CLK_INFRA_133M_CQDMA_BCK 34 -+#define CLK_INFRA_66M_AUD_SLV_BCK 35 -+#define CLK_INFRA_AUD_26M 36 -+#define CLK_INFRA_AUD_L 37 -+#define CLK_INFRA_AUD_AUD 38 -+#define CLK_INFRA_AUD_EG2 39 -+#define CLK_INFRA_DRAMC_F26M 40 -+#define CLK_INFRA_133M_DBG_ACKM 41 -+#define CLK_INFRA_66M_AP_DMA_BCK 42 -+#define CLK_INFRA_66M_SEJ_BCK 43 -+#define CLK_INFRA_PRE_CK_SEJ_F13M 44 -+#define CLK_INFRA_26M_THERM_SYSTEM 45 -+#define CLK_INFRA_I2C_BCK 46 -+#define CLK_INFRA_52M_UART0_CK 47 -+#define CLK_INFRA_52M_UART1_CK 48 -+#define CLK_INFRA_52M_UART2_CK 49 -+#define CLK_INFRA_NFI 50 -+#define CLK_INFRA_SPINFI 51 -+#define CLK_INFRA_66M_NFI_HCK 52 -+#define CLK_INFRA_104M_SPI0 53 -+#define CLK_INFRA_104M_SPI1 54 -+#define CLK_INFRA_104M_SPI2_BCK 55 -+#define CLK_INFRA_66M_SPI0_HCK 56 -+#define CLK_INFRA_66M_SPI1_HCK 57 -+#define CLK_INFRA_66M_SPI2_HCK 58 -+#define CLK_INFRA_66M_FLASHIF_AXI 59 -+#define CLK_INFRA_RTC 60 -+#define CLK_INFRA_26M_ADC_BCK 61 -+#define CLK_INFRA_RC_ADC 62 -+#define CLK_INFRA_MSDC400 63 -+#define CLK_INFRA_MSDC2_HCK 64 -+#define CLK_INFRA_133M_MSDC_0_HCK 65 -+#define CLK_INFRA_66M_MSDC_0_HCK 66 -+#define CLK_INFRA_133M_CPUM_BCK 67 -+#define CLK_INFRA_BIST2FPC 68 -+#define CLK_INFRA_I2C_X16W_MCK_CK_P1 69 -+#define CLK_INFRA_I2C_X16W_PCK_CK_P1 70 -+#define CLK_INFRA_133M_USB_HCK 71 -+#define CLK_INFRA_133M_USB_HCK_CK_P1 72 -+#define CLK_INFRA_66M_USB_HCK 73 -+#define CLK_INFRA_66M_USB_HCK_CK_P1 74 -+#define CLK_INFRA_USB_SYS 75 -+#define CLK_INFRA_USB_SYS_CK_P1 76 -+#define CLK_INFRA_USB_REF 77 -+#define CLK_INFRA_USB_CK_P1 78 -+#define CLK_INFRA_USB_FRMCNT 79 -+#define CLK_INFRA_USB_FRMCNT_CK_P1 80 -+#define CLK_INFRA_USB_PIPE 81 -+#define CLK_INFRA_USB_PIPE_CK_P1 82 -+#define CLK_INFRA_USB_UTMI 83 -+#define CLK_INFRA_USB_UTMI_CK_P1 84 -+#define CLK_INFRA_USB_XHCI 85 -+#define CLK_INFRA_USB_XHCI_CK_P1 86 -+#define CLK_INFRA_PCIE_GFMUX_TL_P0 87 -+#define CLK_INFRA_PCIE_GFMUX_TL_P1 88 -+#define CLK_INFRA_PCIE_GFMUX_TL_P2 89 -+#define CLK_INFRA_PCIE_GFMUX_TL_P3 90 -+#define CLK_INFRA_PCIE_PIPE_P0 91 -+#define CLK_INFRA_PCIE_PIPE_P1 92 -+#define CLK_INFRA_PCIE_PIPE_P2 93 -+#define CLK_INFRA_PCIE_PIPE_P3 94 -+#define CLK_INFRA_133M_PCIE_CK_P0 95 -+#define CLK_INFRA_133M_PCIE_CK_P1 96 -+#define CLK_INFRA_133M_PCIE_CK_P2 97 -+#define CLK_INFRA_133M_PCIE_CK_P3 98 -+ -+/* ETHDMA */ -+ -+#define CLK_ETHDMA_XGP1_EN 0 -+#define CLK_ETHDMA_XGP2_EN 1 -+#define CLK_ETHDMA_XGP3_EN 2 -+#define CLK_ETHDMA_FE_EN 3 -+#define CLK_ETHDMA_GP2_EN 4 -+#define CLK_ETHDMA_GP1_EN 5 -+#define CLK_ETHDMA_GP3_EN 6 -+#define CLK_ETHDMA_ESW_EN 7 -+#define CLK_ETHDMA_CRYPT0_EN 8 -+#define CLK_ETHDMA_NR_CLK 9 -+ -+/* SGMIISYS_0 */ -+ -+#define CLK_SGM0_TX_EN 0 -+#define CLK_SGM0_RX_EN 1 -+#define CLK_SGMII0_NR_CLK 2 -+ -+/* SGMIISYS_1 */ -+ -+#define CLK_SGM1_TX_EN 0 -+#define CLK_SGM1_RX_EN 1 -+#define CLK_SGMII1_NR_CLK 2 -+ -+/* ETHWARP */ -+ -+#define CLK_ETHWARP_WOCPU2_EN 0 -+#define CLK_ETHWARP_WOCPU1_EN 1 -+#define CLK_ETHWARP_WOCPU0_EN 2 -+#define CLK_ETHWARP_NR_CLK 3 -+ -+/* XFIPLL */ -+#define CLK_XFIPLL_PLL 0 -+#define CLK_XFIPLL_PLL_EN 1 -+ -+#endif /* _DT_BINDINGS_CLK_MT7988_H */ diff --git a/target/linux/mediatek/patches-6.1/247-v6.8-dt-bindings-clock-mediatek-add-clock-controllers-of-.patch b/target/linux/mediatek/patches-6.1/247-v6.8-dt-bindings-clock-mediatek-add-clock-controllers-of-.patch deleted file mode 100644 index 79088b461be..00000000000 --- a/target/linux/mediatek/patches-6.1/247-v6.8-dt-bindings-clock-mediatek-add-clock-controllers-of-.patch +++ /dev/null @@ -1,260 +0,0 @@ -From afd36e9d91b0a840983b829a9e95407d8151f7e7 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Sun, 17 Dec 2023 21:49:55 +0000 -Subject: [PATCH 2/4] dt-bindings: clock: mediatek: add clock controllers of - MT7988 - -Add various clock controllers found in the MT7988 SoC to existing -bindings (if applicable) and add files for the new ethwarp, mcusys -and xfi-pll clock controllers not previously present in any SoC. - -Signed-off-by: Daniel Golle -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/07e76a544ce4392bcb88e34d5480e99bb7994618.1702849494.git.daniel@makrotopia.org -Reviewed-by: Krzysztof Kozlowski -Signed-off-by: Stephen Boyd ---- - .../arm/mediatek/mediatek,infracfg.yaml | 1 + - .../bindings/clock/mediatek,apmixedsys.yaml | 1 + - .../bindings/clock/mediatek,ethsys.yaml | 1 + - .../clock/mediatek,mt7988-ethwarp.yaml | 52 +++++++++++++++ - .../clock/mediatek,mt7988-xfi-pll.yaml | 48 ++++++++++++++ - .../bindings/clock/mediatek,topckgen.yaml | 2 + - .../bindings/net/pcs/mediatek,sgmiisys.yaml | 65 ++++++++++++++++--- - 7 files changed, 161 insertions(+), 9 deletions(-) - create mode 100644 Documentation/devicetree/bindings/clock/mediatek,mt7988-ethwarp.yaml - create mode 100644 Documentation/devicetree/bindings/clock/mediatek,mt7988-xfi-pll.yaml - ---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml -+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml -@@ -30,6 +30,7 @@ properties: - - mediatek,mt7629-infracfg - - mediatek,mt7981-infracfg - - mediatek,mt7986-infracfg -+ - mediatek,mt7988-infracfg - - mediatek,mt8135-infracfg - - mediatek,mt8167-infracfg - - mediatek,mt8173-infracfg ---- a/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml -+++ b/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml -@@ -22,6 +22,7 @@ properties: - - mediatek,mt7622-apmixedsys - - mediatek,mt7981-apmixedsys - - mediatek,mt7986-apmixedsys -+ - mediatek,mt7988-apmixedsys - - mediatek,mt8135-apmixedsys - - mediatek,mt8173-apmixedsys - - mediatek,mt8516-apmixedsys ---- a/Documentation/devicetree/bindings/clock/mediatek,ethsys.yaml -+++ b/Documentation/devicetree/bindings/clock/mediatek,ethsys.yaml -@@ -22,6 +22,7 @@ properties: - - mediatek,mt7629-ethsys - - mediatek,mt7981-ethsys - - mediatek,mt7986-ethsys -+ - mediatek,mt7988-ethsys - - const: syscon - - items: - - const: mediatek,mt7623-ethsys ---- /dev/null -+++ b/Documentation/devicetree/bindings/clock/mediatek,mt7988-ethwarp.yaml -@@ -0,0 +1,52 @@ -+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/clock/mediatek,mt7988-ethwarp.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: MediaTek MT7988 ethwarp Controller -+ -+maintainers: -+ - Daniel Golle -+ -+description: -+ The Mediatek MT7988 ethwarp controller provides clocks and resets for the -+ Ethernet related subsystems found the MT7988 SoC. -+ The clock values can be found in . -+ -+properties: -+ compatible: -+ items: -+ - const: mediatek,mt7988-ethwarp -+ -+ reg: -+ maxItems: 1 -+ -+ '#clock-cells': -+ const: 1 -+ -+ '#reset-cells': -+ const: 1 -+ -+required: -+ - compatible -+ - reg -+ - '#clock-cells' -+ - '#reset-cells' -+ -+additionalProperties: false -+ -+examples: -+ - | -+ #include -+ soc { -+ #address-cells = <2>; -+ #size-cells = <2>; -+ -+ clock-controller@15031000 { -+ compatible = "mediatek,mt7988-ethwarp"; -+ reg = <0 0x15031000 0 0x1000>; -+ #clock-cells = <1>; -+ #reset-cells = <1>; -+ }; -+ }; ---- /dev/null -+++ b/Documentation/devicetree/bindings/clock/mediatek,mt7988-xfi-pll.yaml -@@ -0,0 +1,48 @@ -+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/clock/mediatek,mt7988-xfi-pll.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: MediaTek MT7988 XFI PLL Clock Controller -+ -+maintainers: -+ - Daniel Golle -+ -+description: -+ The MediaTek XFI PLL controller provides the 156.25MHz clock for the -+ Ethernet SerDes PHY from the 40MHz top_xtal clock. -+ -+properties: -+ compatible: -+ const: mediatek,mt7988-xfi-pll -+ -+ reg: -+ maxItems: 1 -+ -+ resets: -+ maxItems: 1 -+ -+ '#clock-cells': -+ const: 1 -+ -+required: -+ - compatible -+ - reg -+ - resets -+ - '#clock-cells' -+ -+additionalProperties: false -+ -+examples: -+ - | -+ soc { -+ #address-cells = <2>; -+ #size-cells = <2>; -+ clock-controller@11f40000 { -+ compatible = "mediatek,mt7988-xfi-pll"; -+ reg = <0 0x11f40000 0 0x1000>; -+ resets = <&watchdog 16>; -+ #clock-cells = <1>; -+ }; -+ }; ---- a/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml -+++ b/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml -@@ -37,6 +37,8 @@ properties: - - mediatek,mt7629-topckgen - - mediatek,mt7981-topckgen - - mediatek,mt7986-topckgen -+ - mediatek,mt7988-mcusys -+ - mediatek,mt7988-topckgen - - mediatek,mt8167-topckgen - - mediatek,mt8183-topckgen - - const: syscon ---- a/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml -+++ b/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml -@@ -15,15 +15,22 @@ description: - - properties: - compatible: -- items: -- - enum: -- - mediatek,mt7622-sgmiisys -- - mediatek,mt7629-sgmiisys -- - mediatek,mt7981-sgmiisys_0 -- - mediatek,mt7981-sgmiisys_1 -- - mediatek,mt7986-sgmiisys_0 -- - mediatek,mt7986-sgmiisys_1 -- - const: syscon -+ oneOf: -+ - items: -+ - enum: -+ - mediatek,mt7622-sgmiisys -+ - mediatek,mt7629-sgmiisys -+ - mediatek,mt7981-sgmiisys_0 -+ - mediatek,mt7981-sgmiisys_1 -+ - mediatek,mt7986-sgmiisys_0 -+ - mediatek,mt7986-sgmiisys_1 -+ - const: syscon -+ - items: -+ - enum: -+ - mediatek,mt7988-sgmiisys0 -+ - mediatek,mt7988-sgmiisys1 -+ - const: simple-mfd -+ - const: syscon - - reg: - maxItems: 1 -@@ -35,11 +42,51 @@ properties: - description: Invert polarity of the SGMII data lanes - type: boolean - -+ pcs: -+ type: object -+ description: MediaTek LynxI HSGMII PCS -+ properties: -+ compatible: -+ const: mediatek,mt7988-sgmii -+ -+ clocks: -+ maxItems: 3 -+ -+ clock-names: -+ items: -+ - const: sgmii_sel -+ - const: sgmii_tx -+ - const: sgmii_rx -+ -+ required: -+ - compatible -+ - clocks -+ - clock-names -+ -+ additionalProperties: false -+ - required: - - compatible - - reg - - '#clock-cells' - -+allOf: -+ - if: -+ properties: -+ compatible: -+ contains: -+ enum: -+ - mediatek,mt7988-sgmiisys0 -+ - mediatek,mt7988-sgmiisys1 -+ -+ then: -+ required: -+ - pcs -+ -+ else: -+ properties: -+ pcs: false -+ - additionalProperties: false - - examples: diff --git a/target/linux/mediatek/patches-6.1/248-v6.8-clk-mediatek-add-pcw_chg_bit-control-for-PLLs-of-MT7.patch b/target/linux/mediatek/patches-6.1/248-v6.8-clk-mediatek-add-pcw_chg_bit-control-for-PLLs-of-MT7.patch deleted file mode 100644 index ca37fc793a7..00000000000 --- a/target/linux/mediatek/patches-6.1/248-v6.8-clk-mediatek-add-pcw_chg_bit-control-for-PLLs-of-MT7.patch +++ /dev/null @@ -1,50 +0,0 @@ -From d9bf944beaaad1890ad3fcb755c61e1c7e4c5630 Mon Sep 17 00:00:00 2001 -From: Sam Shih -Date: Sun, 17 Dec 2023 21:50:07 +0000 -Subject: [PATCH 3/4] clk: mediatek: add pcw_chg_bit control for PLLs of MT7988 - -Introduce pcw_chg_bit member to struct mtk_pll_data and use it instead -of the previously hardcoded PCW_CHG_MASK macro if set. -This will needed for clocks on the MT7988 SoC. - -Signed-off-by: Sam Shih -Signed-off-by: Daniel Golle -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/3b9c65ddb08c8bedf790aacf29871af026b6f0b7.1702849494.git.daniel@makrotopia.org -Signed-off-by: Stephen Boyd ---- - drivers/clk/mediatek/clk-pll.c | 5 +++-- - drivers/clk/mediatek/clk-pll.h | 1 + - 2 files changed, 4 insertions(+), 2 deletions(-) - ---- a/drivers/clk/mediatek/clk-pll.c -+++ b/drivers/clk/mediatek/clk-pll.c -@@ -23,7 +23,7 @@ - #define CON0_BASE_EN BIT(0) - #define CON0_PWR_ON BIT(0) - #define CON0_ISO_EN BIT(1) --#define PCW_CHG_MASK BIT(31) -+#define PCW_CHG_BIT 31 - - #define AUDPLL_TUNER_EN BIT(31) - -@@ -141,7 +141,8 @@ static void mtk_pll_set_rate_regs(struct - pll->data->pcw_shift); - val |= pcw << pll->data->pcw_shift; - writel(val, pll->pcw_addr); -- chg = readl(pll->pcw_chg_addr) | PCW_CHG_MASK; -+ chg = readl(pll->pcw_chg_addr) | -+ BIT(pll->data->pcw_chg_bit ? : PCW_CHG_BIT); - writel(chg, pll->pcw_chg_addr); - if (pll->tuner_addr) - writel(val + 1, pll->tuner_addr); ---- a/drivers/clk/mediatek/clk-pll.h -+++ b/drivers/clk/mediatek/clk-pll.h -@@ -46,6 +46,7 @@ struct mtk_pll_data { - const char *parent_name; - u32 en_reg; - u8 pll_en_bit; /* Assume 0, indicates BIT(0) by default */ -+ u8 pcw_chg_bit; - }; - - int mtk_clk_register_plls(struct device_node *node, diff --git a/target/linux/mediatek/patches-6.1/249-v6.8-clk-mediatek-add-drivers-for-MT7988-SoC.patch b/target/linux/mediatek/patches-6.1/249-v6.8-clk-mediatek-add-drivers-for-MT7988-SoC.patch deleted file mode 100644 index 61664b934cb..00000000000 --- a/target/linux/mediatek/patches-6.1/249-v6.8-clk-mediatek-add-drivers-for-MT7988-SoC.patch +++ /dev/null @@ -1,1026 +0,0 @@ -From 4b4719437d85f0173d344f2c76fa1a5b7f7d184b Mon Sep 17 00:00:00 2001 -From: Sam Shih -Date: Sun, 17 Dec 2023 21:50:15 +0000 -Subject: [PATCH 4/4] clk: mediatek: add drivers for MT7988 SoC - -Add APMIXED, ETH, INFRACFG and TOPCKGEN clock drivers which are -typical MediaTek designs. - -Also add driver for XFIPLL clock generating the 156.25MHz clock for -the XFI SerDes. It needs an undocumented software workaround and has -an unknown internal design. - -Signed-off-by: Sam Shih -Signed-off-by: Daniel Golle -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/c7574d808e2da1a530182f0fd790c1337c336e1b.1702849494.git.daniel@makrotopia.org -[sboyd@kernel.org: Add module license to infracfg file] -Signed-off-by: Stephen Boyd ---- - drivers/clk/mediatek/Kconfig | 9 + - drivers/clk/mediatek/Makefile | 5 + - drivers/clk/mediatek/clk-mt7988-apmixed.c | 114 ++++++++ - drivers/clk/mediatek/clk-mt7988-eth.c | 150 ++++++++++ - drivers/clk/mediatek/clk-mt7988-infracfg.c | 275 +++++++++++++++++ - drivers/clk/mediatek/clk-mt7988-topckgen.c | 325 +++++++++++++++++++++ - drivers/clk/mediatek/clk-mt7988-xfipll.c | 82 ++++++ - 7 files changed, 960 insertions(+) - create mode 100644 drivers/clk/mediatek/clk-mt7988-apmixed.c - create mode 100644 drivers/clk/mediatek/clk-mt7988-eth.c - create mode 100644 drivers/clk/mediatek/clk-mt7988-infracfg.c - create mode 100644 drivers/clk/mediatek/clk-mt7988-topckgen.c - create mode 100644 drivers/clk/mediatek/clk-mt7988-xfipll.c - ---- a/drivers/clk/mediatek/Kconfig -+++ b/drivers/clk/mediatek/Kconfig -@@ -415,6 +415,15 @@ config COMMON_CLK_MT7986_ETHSYS - This driver adds support for clocks for Ethernet and SGMII - required on MediaTek MT7986 SoC. - -+config COMMON_CLK_MT7988 -+ tristate "Clock driver for MediaTek MT7988" -+ depends on ARCH_MEDIATEK || COMPILE_TEST -+ select COMMON_CLK_MEDIATEK -+ default ARCH_MEDIATEK -+ help -+ This driver supports MediaTek MT7988 basic clocks and clocks -+ required for various periperals found on this SoC. -+ - config COMMON_CLK_MT8135 - bool "Clock driver for MediaTek MT8135" - depends on (ARCH_MEDIATEK && ARM) || COMPILE_TEST ---- a/drivers/clk/mediatek/Makefile -+++ b/drivers/clk/mediatek/Makefile -@@ -60,6 +60,11 @@ obj-$(CONFIG_COMMON_CLK_MT7986) += clk-m - obj-$(CONFIG_COMMON_CLK_MT7986) += clk-mt7986-topckgen.o - obj-$(CONFIG_COMMON_CLK_MT7986) += clk-mt7986-infracfg.o - obj-$(CONFIG_COMMON_CLK_MT7986_ETHSYS) += clk-mt7986-eth.o -+obj-$(CONFIG_COMMON_CLK_MT7988) += clk-mt7988-apmixed.o -+obj-$(CONFIG_COMMON_CLK_MT7988) += clk-mt7988-topckgen.o -+obj-$(CONFIG_COMMON_CLK_MT7988) += clk-mt7988-infracfg.o -+obj-$(CONFIG_COMMON_CLK_MT7988) += clk-mt7988-eth.o -+obj-$(CONFIG_COMMON_CLK_MT7988) += clk-mt7988-xfipll.o - obj-$(CONFIG_COMMON_CLK_MT8135) += clk-mt8135.o - obj-$(CONFIG_COMMON_CLK_MT8167) += clk-mt8167.o - obj-$(CONFIG_COMMON_CLK_MT8167_AUDSYS) += clk-mt8167-aud.o ---- /dev/null -+++ b/drivers/clk/mediatek/clk-mt7988-apmixed.c -@@ -0,0 +1,114 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright (c) 2023 MediaTek Inc. -+ * Author: Sam Shih -+ * Author: Xiufeng Li -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include "clk-mtk.h" -+#include "clk-gate.h" -+#include "clk-mux.h" -+#include "clk-pll.h" -+#include -+ -+#define MT7988_PLL_FMAX (2500UL * MHZ) -+#define MT7988_PCW_CHG_BIT 2 -+ -+#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _rst_bar_mask, _pcwbits, _pd_reg, \ -+ _pd_shift, _tuner_reg, _tuner_en_reg, _tuner_en_bit, _pcw_reg, _pcw_shift, \ -+ _pcw_chg_reg) \ -+ { \ -+ .id = _id, \ -+ .name = _name, \ -+ .reg = _reg, \ -+ .pwr_reg = _pwr_reg, \ -+ .en_mask = _en_mask, \ -+ .flags = _flags, \ -+ .rst_bar_mask = BIT(_rst_bar_mask), \ -+ .fmax = MT7988_PLL_FMAX, \ -+ .pcwbits = _pcwbits, \ -+ .pd_reg = _pd_reg, \ -+ .pd_shift = _pd_shift, \ -+ .tuner_reg = _tuner_reg, \ -+ .tuner_en_reg = _tuner_en_reg, \ -+ .tuner_en_bit = _tuner_en_bit, \ -+ .pcw_reg = _pcw_reg, \ -+ .pcw_shift = _pcw_shift, \ -+ .pcw_chg_reg = _pcw_chg_reg, \ -+ .pcw_chg_bit = MT7988_PCW_CHG_BIT, \ -+ .parent_name = "clkxtal", \ -+ } -+ -+static const struct mtk_pll_data plls[] = { -+ PLL(CLK_APMIXED_NETSYSPLL, "netsyspll", 0x0104, 0x0110, 0x00000001, 0, 0, 32, 0x0104, 4, 0, -+ 0, 0, 0x0108, 0, 0x0104), -+ PLL(CLK_APMIXED_MPLL, "mpll", 0x0114, 0x0120, 0xff000001, HAVE_RST_BAR, 23, 32, 0x0114, 4, -+ 0, 0, 0, 0x0118, 0, 0x0114), -+ PLL(CLK_APMIXED_MMPLL, "mmpll", 0x0124, 0x0130, 0xff000001, HAVE_RST_BAR, 23, 32, 0x0124, 4, -+ 0, 0, 0, 0x0128, 0, 0x0124), -+ PLL(CLK_APMIXED_APLL2, "apll2", 0x0134, 0x0140, 0x00000001, 0, 0, 32, 0x0134, 4, 0x0704, -+ 0x0700, 1, 0x0138, 0, 0x0134), -+ PLL(CLK_APMIXED_NET1PLL, "net1pll", 0x0144, 0x0150, 0xff000001, HAVE_RST_BAR, 23, 32, -+ 0x0144, 4, 0, 0, 0, 0x0148, 0, 0x0144), -+ PLL(CLK_APMIXED_NET2PLL, "net2pll", 0x0154, 0x0160, 0xff000001, (HAVE_RST_BAR | PLL_AO), 23, -+ 32, 0x0154, 4, 0, 0, 0, 0x0158, 0, 0x0154), -+ PLL(CLK_APMIXED_WEDMCUPLL, "wedmcupll", 0x0164, 0x0170, 0x00000001, 0, 0, 32, 0x0164, 4, 0, -+ 0, 0, 0x0168, 0, 0x0164), -+ PLL(CLK_APMIXED_SGMPLL, "sgmpll", 0x0174, 0x0180, 0x00000001, 0, 0, 32, 0x0174, 4, 0, 0, 0, -+ 0x0178, 0, 0x0174), -+ PLL(CLK_APMIXED_ARM_B, "arm_b", 0x0204, 0x0210, 0xff000001, (HAVE_RST_BAR | PLL_AO), 23, 32, -+ 0x0204, 4, 0, 0, 0, 0x0208, 0, 0x0204), -+ PLL(CLK_APMIXED_CCIPLL2_B, "ccipll2_b", 0x0214, 0x0220, 0xff000001, HAVE_RST_BAR, 23, 32, -+ 0x0214, 4, 0, 0, 0, 0x0218, 0, 0x0214), -+ PLL(CLK_APMIXED_USXGMIIPLL, "usxgmiipll", 0x0304, 0x0310, 0xff000001, HAVE_RST_BAR, 23, 32, -+ 0x0304, 4, 0, 0, 0, 0x0308, 0, 0x0304), -+ PLL(CLK_APMIXED_MSDCPLL, "msdcpll", 0x0314, 0x0320, 0x00000001, 0, 0, 32, 0x0314, 4, 0, 0, -+ 0, 0x0318, 0, 0x0314), -+}; -+ -+static const struct of_device_id of_match_clk_mt7988_apmixed[] = { -+ { .compatible = "mediatek,mt7988-apmixedsys" }, -+ { /* sentinel */ } -+}; -+ -+static int clk_mt7988_apmixed_probe(struct platform_device *pdev) -+{ -+ struct clk_hw_onecell_data *clk_data; -+ struct device_node *node = pdev->dev.of_node; -+ int r; -+ -+ clk_data = mtk_alloc_clk_data(ARRAY_SIZE(plls)); -+ if (!clk_data) -+ return -ENOMEM; -+ -+ r = mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data); -+ if (r) -+ goto free_apmixed_data; -+ -+ r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); -+ if (r) -+ goto unregister_plls; -+ -+ return r; -+ -+unregister_plls: -+ mtk_clk_unregister_plls(plls, ARRAY_SIZE(plls), clk_data); -+free_apmixed_data: -+ mtk_free_clk_data(clk_data); -+ return r; -+} -+ -+static struct platform_driver clk_mt7988_apmixed_drv = { -+ .probe = clk_mt7988_apmixed_probe, -+ .driver = { -+ .name = "clk-mt7988-apmixed", -+ .of_match_table = of_match_clk_mt7988_apmixed, -+ }, -+}; -+builtin_platform_driver(clk_mt7988_apmixed_drv); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/clk/mediatek/clk-mt7988-eth.c -@@ -0,0 +1,150 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright (c) 2023 MediaTek Inc. -+ * Author: Sam Shih -+ * Author: Xiufeng Li -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include "clk-mtk.h" -+#include "clk-gate.h" -+#include "reset.h" -+#include -+#include -+ -+static const struct mtk_gate_regs ethdma_cg_regs = { -+ .set_ofs = 0x30, -+ .clr_ofs = 0x30, -+ .sta_ofs = 0x30, -+}; -+ -+#define GATE_ETHDMA(_id, _name, _parent, _shift) \ -+ { \ -+ .id = _id, \ -+ .name = _name, \ -+ .parent_name = _parent, \ -+ .regs = ðdma_cg_regs, \ -+ .shift = _shift, \ -+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \ -+ } -+ -+static const struct mtk_gate ethdma_clks[] = { -+ GATE_ETHDMA(CLK_ETHDMA_XGP1_EN, "ethdma_xgp1_en", "top_xtal", 0), -+ GATE_ETHDMA(CLK_ETHDMA_XGP2_EN, "ethdma_xgp2_en", "top_xtal", 1), -+ GATE_ETHDMA(CLK_ETHDMA_XGP3_EN, "ethdma_xgp3_en", "top_xtal", 2), -+ GATE_ETHDMA(CLK_ETHDMA_FE_EN, "ethdma_fe_en", "netsys_2x_sel", 6), -+ GATE_ETHDMA(CLK_ETHDMA_GP2_EN, "ethdma_gp2_en", "top_xtal", 7), -+ GATE_ETHDMA(CLK_ETHDMA_GP1_EN, "ethdma_gp1_en", "top_xtal", 8), -+ GATE_ETHDMA(CLK_ETHDMA_GP3_EN, "ethdma_gp3_en", "top_xtal", 10), -+ GATE_ETHDMA(CLK_ETHDMA_ESW_EN, "ethdma_esw_en", "netsys_gsw_sel", 16), -+ GATE_ETHDMA(CLK_ETHDMA_CRYPT0_EN, "ethdma_crypt0_en", "eip197_sel", 29), -+}; -+ -+static const struct mtk_clk_desc ethdma_desc = { -+ .clks = ethdma_clks, -+ .num_clks = ARRAY_SIZE(ethdma_clks), -+}; -+ -+static const struct mtk_gate_regs sgmii_cg_regs = { -+ .set_ofs = 0xe4, -+ .clr_ofs = 0xe4, -+ .sta_ofs = 0xe4, -+}; -+ -+#define GATE_SGMII(_id, _name, _parent, _shift) \ -+ { \ -+ .id = _id, \ -+ .name = _name, \ -+ .parent_name = _parent, \ -+ .regs = &sgmii_cg_regs, \ -+ .shift = _shift, \ -+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \ -+ } -+ -+static const struct mtk_gate sgmii0_clks[] = { -+ GATE_SGMII(CLK_SGM0_TX_EN, "sgm0_tx_en", "top_xtal", 2), -+ GATE_SGMII(CLK_SGM0_RX_EN, "sgm0_rx_en", "top_xtal", 3), -+}; -+ -+static const struct mtk_clk_desc sgmii0_desc = { -+ .clks = sgmii0_clks, -+ .num_clks = ARRAY_SIZE(sgmii0_clks), -+}; -+ -+static const struct mtk_gate sgmii1_clks[] = { -+ GATE_SGMII(CLK_SGM1_TX_EN, "sgm1_tx_en", "top_xtal", 2), -+ GATE_SGMII(CLK_SGM1_RX_EN, "sgm1_rx_en", "top_xtal", 3), -+}; -+ -+static const struct mtk_clk_desc sgmii1_desc = { -+ .clks = sgmii1_clks, -+ .num_clks = ARRAY_SIZE(sgmii1_clks), -+}; -+ -+static const struct mtk_gate_regs ethwarp_cg_regs = { -+ .set_ofs = 0x14, -+ .clr_ofs = 0x14, -+ .sta_ofs = 0x14, -+}; -+ -+#define GATE_ETHWARP(_id, _name, _parent, _shift) \ -+ { \ -+ .id = _id, \ -+ .name = _name, \ -+ .parent_name = _parent, \ -+ .regs = ðwarp_cg_regs, \ -+ .shift = _shift, \ -+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \ -+ } -+ -+static const struct mtk_gate ethwarp_clks[] = { -+ GATE_ETHWARP(CLK_ETHWARP_WOCPU2_EN, "ethwarp_wocpu2_en", "netsys_mcu_sel", 13), -+ GATE_ETHWARP(CLK_ETHWARP_WOCPU1_EN, "ethwarp_wocpu1_en", "netsys_mcu_sel", 14), -+ GATE_ETHWARP(CLK_ETHWARP_WOCPU0_EN, "ethwarp_wocpu0_en", "netsys_mcu_sel", 15), -+}; -+ -+static u16 ethwarp_rst_ofs[] = { 0x8 }; -+ -+static u16 ethwarp_idx_map[] = { -+ [MT7988_ETHWARP_RST_SWITCH] = 9, -+}; -+ -+static const struct mtk_clk_rst_desc ethwarp_rst_desc = { -+ .version = MTK_RST_SIMPLE, -+ .rst_bank_ofs = ethwarp_rst_ofs, -+ .rst_bank_nr = ARRAY_SIZE(ethwarp_rst_ofs), -+ .rst_idx_map = ethwarp_idx_map, -+ .rst_idx_map_nr = ARRAY_SIZE(ethwarp_idx_map), -+}; -+ -+static const struct mtk_clk_desc ethwarp_desc = { -+ .clks = ethwarp_clks, -+ .num_clks = ARRAY_SIZE(ethwarp_clks), -+ .rst_desc = ðwarp_rst_desc, -+}; -+ -+static const struct of_device_id of_match_clk_mt7988_eth[] = { -+ { .compatible = "mediatek,mt7988-ethsys", .data = ðdma_desc }, -+ { .compatible = "mediatek,mt7988-sgmiisys0", .data = &sgmii0_desc }, -+ { .compatible = "mediatek,mt7988-sgmiisys1", .data = &sgmii1_desc }, -+ { .compatible = "mediatek,mt7988-ethwarp", .data = ðwarp_desc }, -+ { /* sentinel */ } -+}; -+MODULE_DEVICE_TABLE(of, of_match_clk_mt7988_eth); -+ -+static struct platform_driver clk_mt7988_eth_drv = { -+ .driver = { -+ .name = "clk-mt7988-eth", -+ .of_match_table = of_match_clk_mt7988_eth, -+ }, -+ .probe = mtk_clk_simple_probe, -+ .remove = mtk_clk_simple_remove, -+}; -+module_platform_driver(clk_mt7988_eth_drv); -+ -+MODULE_DESCRIPTION("MediaTek MT7988 Ethernet clocks driver"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/clk/mediatek/clk-mt7988-infracfg.c -@@ -0,0 +1,275 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright (c) 2023 MediaTek Inc. -+ * Author: Sam Shih -+ * Author: Xiufeng Li -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include "clk-mtk.h" -+#include "clk-gate.h" -+#include "clk-mux.h" -+#include -+ -+static DEFINE_SPINLOCK(mt7988_clk_lock); -+ -+static const char *const infra_mux_uart0_parents[] __initconst = { "csw_infra_f26m_sel", -+ "uart_sel" }; -+ -+static const char *const infra_mux_uart1_parents[] __initconst = { "csw_infra_f26m_sel", -+ "uart_sel" }; -+ -+static const char *const infra_mux_uart2_parents[] __initconst = { "csw_infra_f26m_sel", -+ "uart_sel" }; -+ -+static const char *const infra_mux_spi0_parents[] __initconst = { "i2c_sel", "spi_sel" }; -+ -+static const char *const infra_mux_spi1_parents[] __initconst = { "i2c_sel", "spim_mst_sel" }; -+ -+static const char *const infra_pwm_bck_parents[] __initconst = { "top_rtc_32p7k", -+ "csw_infra_f26m_sel", "sysaxi_sel", -+ "pwm_sel" }; -+ -+static const char *const infra_pcie_gfmux_tl_ck_o_p0_parents[] __initconst = { -+ "top_rtc_32p7k", "csw_infra_f26m_sel", "csw_infra_f26m_sel", "pextp_tl_sel" -+}; -+ -+static const char *const infra_pcie_gfmux_tl_ck_o_p1_parents[] __initconst = { -+ "top_rtc_32p7k", "csw_infra_f26m_sel", "csw_infra_f26m_sel", "pextp_tl_p1_sel" -+}; -+ -+static const char *const infra_pcie_gfmux_tl_ck_o_p2_parents[] __initconst = { -+ "top_rtc_32p7k", "csw_infra_f26m_sel", "csw_infra_f26m_sel", "pextp_tl_p2_sel" -+}; -+ -+static const char *const infra_pcie_gfmux_tl_ck_o_p3_parents[] __initconst = { -+ "top_rtc_32p7k", "csw_infra_f26m_sel", "csw_infra_f26m_sel", "pextp_tl_p3_sel" -+}; -+ -+static const struct mtk_mux infra_muxes[] = { -+ /* MODULE_CLK_SEL_0 */ -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_MUX_UART0_SEL, "infra_mux_uart0_sel", -+ infra_mux_uart0_parents, 0x0018, 0x0010, 0x0014, 0, 1, -1, -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_MUX_UART1_SEL, "infra_mux_uart1_sel", -+ infra_mux_uart1_parents, 0x0018, 0x0010, 0x0014, 1, 1, -1, -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_MUX_UART2_SEL, "infra_mux_uart2_sel", -+ infra_mux_uart2_parents, 0x0018, 0x0010, 0x0014, 2, 1, -1, -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_MUX_SPI0_SEL, "infra_mux_spi0_sel", infra_mux_spi0_parents, -+ 0x0018, 0x0010, 0x0014, 4, 1, -1, -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_MUX_SPI1_SEL, "infra_mux_spi1_sel", infra_mux_spi1_parents, -+ 0x0018, 0x0010, 0x0014, 5, 1, -1, -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_MUX_SPI2_SEL, "infra_mux_spi2_sel", infra_mux_spi0_parents, -+ 0x0018, 0x0010, 0x0014, 6, 1, -1, -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM_SEL, "infra_pwm_sel", infra_pwm_bck_parents, 0x0018, -+ 0x0010, 0x0014, 14, 2, -1, -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM_CK1_SEL, "infra_pwm_ck1_sel", infra_pwm_bck_parents, -+ 0x0018, 0x0010, 0x0014, 16, 2, -1, -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM_CK2_SEL, "infra_pwm_ck2_sel", infra_pwm_bck_parents, -+ 0x0018, 0x0010, 0x0014, 18, 2, -1, -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM_CK3_SEL, "infra_pwm_ck3_sel", infra_pwm_bck_parents, -+ 0x0018, 0x0010, 0x0014, 20, 2, -1, -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM_CK4_SEL, "infra_pwm_ck4_sel", infra_pwm_bck_parents, -+ 0x0018, 0x0010, 0x0014, 22, 2, -1, -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM_CK5_SEL, "infra_pwm_ck5_sel", infra_pwm_bck_parents, -+ 0x0018, 0x0010, 0x0014, 24, 2, -1, -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM_CK6_SEL, "infra_pwm_ck6_sel", infra_pwm_bck_parents, -+ 0x0018, 0x0010, 0x0014, 26, 2, -1, -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM_CK7_SEL, "infra_pwm_ck7_sel", infra_pwm_bck_parents, -+ 0x0018, 0x0010, 0x0014, 28, 2, -1, -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM_CK8_SEL, "infra_pwm_ck8_sel", infra_pwm_bck_parents, -+ 0x0018, 0x0010, 0x0014, 30, 2, -1, -1, -1), -+ /* MODULE_CLK_SEL_1 */ -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_PCIE_GFMUX_TL_O_P0_SEL, "infra_pcie_gfmux_tl_o_p0_sel", -+ infra_pcie_gfmux_tl_ck_o_p0_parents, 0x0028, 0x0020, 0x0024, 0, 2, -1, -+ -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_PCIE_GFMUX_TL_O_P1_SEL, "infra_pcie_gfmux_tl_o_p1_sel", -+ infra_pcie_gfmux_tl_ck_o_p1_parents, 0x0028, 0x0020, 0x0024, 2, 2, -1, -+ -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_PCIE_GFMUX_TL_O_P2_SEL, "infra_pcie_gfmux_tl_o_p2_sel", -+ infra_pcie_gfmux_tl_ck_o_p2_parents, 0x0028, 0x0020, 0x0024, 4, 2, -1, -+ -1, -1), -+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_PCIE_GFMUX_TL_O_P3_SEL, "infra_pcie_gfmux_tl_o_p3_sel", -+ infra_pcie_gfmux_tl_ck_o_p3_parents, 0x0028, 0x0020, 0x0024, 6, 2, -1, -+ -1, -1), -+}; -+ -+static const struct mtk_gate_regs infra0_cg_regs = { -+ .set_ofs = 0x10, -+ .clr_ofs = 0x14, -+ .sta_ofs = 0x18, -+}; -+ -+static const struct mtk_gate_regs infra1_cg_regs = { -+ .set_ofs = 0x40, -+ .clr_ofs = 0x44, -+ .sta_ofs = 0x48, -+}; -+ -+static const struct mtk_gate_regs infra2_cg_regs = { -+ .set_ofs = 0x50, -+ .clr_ofs = 0x54, -+ .sta_ofs = 0x58, -+}; -+ -+static const struct mtk_gate_regs infra3_cg_regs = { -+ .set_ofs = 0x60, -+ .clr_ofs = 0x64, -+ .sta_ofs = 0x68, -+}; -+ -+#define GATE_INFRA0_FLAGS(_id, _name, _parent, _shift, _flags) \ -+ GATE_MTK_FLAGS(_id, _name, _parent, &infra0_cg_regs, _shift, &mtk_clk_gate_ops_setclr, \ -+ _flags) -+ -+#define GATE_INFRA1_FLAGS(_id, _name, _parent, _shift, _flags) \ -+ GATE_MTK_FLAGS(_id, _name, _parent, &infra1_cg_regs, _shift, &mtk_clk_gate_ops_setclr, \ -+ _flags) -+ -+#define GATE_INFRA2_FLAGS(_id, _name, _parent, _shift, _flags) \ -+ GATE_MTK_FLAGS(_id, _name, _parent, &infra2_cg_regs, _shift, &mtk_clk_gate_ops_setclr, \ -+ _flags) -+ -+#define GATE_INFRA3_FLAGS(_id, _name, _parent, _shift, _flags) \ -+ GATE_MTK_FLAGS(_id, _name, _parent, &infra3_cg_regs, _shift, &mtk_clk_gate_ops_setclr, \ -+ _flags) -+ -+#define GATE_INFRA0(_id, _name, _parent, _shift) GATE_INFRA0_FLAGS(_id, _name, _parent, _shift, 0) -+ -+#define GATE_INFRA1(_id, _name, _parent, _shift) GATE_INFRA1_FLAGS(_id, _name, _parent, _shift, 0) -+ -+#define GATE_INFRA2(_id, _name, _parent, _shift) GATE_INFRA2_FLAGS(_id, _name, _parent, _shift, 0) -+ -+#define GATE_INFRA3(_id, _name, _parent, _shift) GATE_INFRA3_FLAGS(_id, _name, _parent, _shift, 0) -+ -+static const struct mtk_gate infra_clks[] = { -+ /* INFRA0 */ -+ GATE_INFRA0(CLK_INFRA_PCIE_PERI_26M_CK_P0, "infra_pcie_peri_ck_26m_ck_p0", -+ "csw_infra_f26m_sel", 7), -+ GATE_INFRA0(CLK_INFRA_PCIE_PERI_26M_CK_P1, "infra_pcie_peri_ck_26m_ck_p1", -+ "csw_infra_f26m_sel", 8), -+ GATE_INFRA0(CLK_INFRA_PCIE_PERI_26M_CK_P2, "infra_pcie_peri_ck_26m_ck_p2", -+ "csw_infra_f26m_sel", 9), -+ GATE_INFRA0(CLK_INFRA_PCIE_PERI_26M_CK_P3, "infra_pcie_peri_ck_26m_ck_p3", -+ "csw_infra_f26m_sel", 10), -+ /* INFRA1 */ -+ GATE_INFRA1(CLK_INFRA_66M_GPT_BCK, "infra_hf_66m_gpt_bck", "sysaxi_sel", 0), -+ GATE_INFRA1(CLK_INFRA_66M_PWM_HCK, "infra_hf_66m_pwm_hck", "sysaxi_sel", 1), -+ GATE_INFRA1(CLK_INFRA_66M_PWM_BCK, "infra_hf_66m_pwm_bck", "infra_pwm_sel", 2), -+ GATE_INFRA1(CLK_INFRA_66M_PWM_CK1, "infra_hf_66m_pwm_ck1", "infra_pwm_ck1_sel", 3), -+ GATE_INFRA1(CLK_INFRA_66M_PWM_CK2, "infra_hf_66m_pwm_ck2", "infra_pwm_ck2_sel", 4), -+ GATE_INFRA1(CLK_INFRA_66M_PWM_CK3, "infra_hf_66m_pwm_ck3", "infra_pwm_ck3_sel", 5), -+ GATE_INFRA1(CLK_INFRA_66M_PWM_CK4, "infra_hf_66m_pwm_ck4", "infra_pwm_ck4_sel", 6), -+ GATE_INFRA1(CLK_INFRA_66M_PWM_CK5, "infra_hf_66m_pwm_ck5", "infra_pwm_ck5_sel", 7), -+ GATE_INFRA1(CLK_INFRA_66M_PWM_CK6, "infra_hf_66m_pwm_ck6", "infra_pwm_ck6_sel", 8), -+ GATE_INFRA1(CLK_INFRA_66M_PWM_CK7, "infra_hf_66m_pwm_ck7", "infra_pwm_ck7_sel", 9), -+ GATE_INFRA1(CLK_INFRA_66M_PWM_CK8, "infra_hf_66m_pwm_ck8", "infra_pwm_ck8_sel", 10), -+ GATE_INFRA1(CLK_INFRA_133M_CQDMA_BCK, "infra_hf_133m_cqdma_bck", "sysaxi_sel", 12), -+ GATE_INFRA1(CLK_INFRA_66M_AUD_SLV_BCK, "infra_66m_aud_slv_bck", "sysaxi_sel", 13), -+ GATE_INFRA1(CLK_INFRA_AUD_26M, "infra_f_faud_26m", "csw_infra_f26m_sel", 14), -+ GATE_INFRA1(CLK_INFRA_AUD_L, "infra_f_faud_l", "aud_l_sel", 15), -+ GATE_INFRA1(CLK_INFRA_AUD_AUD, "infra_f_aud_aud", "a1sys_sel", 16), -+ GATE_INFRA1(CLK_INFRA_AUD_EG2, "infra_f_faud_eg2", "a_tuner_sel", 18), -+ GATE_INFRA1_FLAGS(CLK_INFRA_DRAMC_F26M, "infra_dramc_f26m", "csw_infra_f26m_sel", 19, -+ CLK_IS_CRITICAL), -+ /* JTAG */ -+ GATE_INFRA1_FLAGS(CLK_INFRA_133M_DBG_ACKM, "infra_hf_133m_dbg_ackm", "sysaxi_sel", 20, -+ CLK_IS_CRITICAL), -+ GATE_INFRA1(CLK_INFRA_66M_AP_DMA_BCK, "infra_66m_ap_dma_bck", "sysaxi_sel", 21), -+ GATE_INFRA1(CLK_INFRA_66M_SEJ_BCK, "infra_hf_66m_sej_bck", "sysaxi_sel", 29), -+ GATE_INFRA1(CLK_INFRA_PRE_CK_SEJ_F13M, "infra_pre_ck_sej_f13m", "csw_infra_f26m_sel", 30), -+ /* INFRA2 */ -+ GATE_INFRA2(CLK_INFRA_26M_THERM_SYSTEM, "infra_hf_26m_therm_system", "csw_infra_f26m_sel", -+ 0), -+ GATE_INFRA2(CLK_INFRA_I2C_BCK, "infra_i2c_bck", "i2c_sel", 1), -+ GATE_INFRA2(CLK_INFRA_52M_UART0_CK, "infra_f_52m_uart0", "infra_mux_uart0_sel", 3), -+ GATE_INFRA2(CLK_INFRA_52M_UART1_CK, "infra_f_52m_uart1", "infra_mux_uart1_sel", 4), -+ GATE_INFRA2(CLK_INFRA_52M_UART2_CK, "infra_f_52m_uart2", "infra_mux_uart2_sel", 5), -+ GATE_INFRA2(CLK_INFRA_NFI, "infra_f_fnfi", "nfi1x_sel", 9), -+ GATE_INFRA2(CLK_INFRA_SPINFI, "infra_f_fspinfi", "spinfi_sel", 10), -+ GATE_INFRA2_FLAGS(CLK_INFRA_66M_NFI_HCK, "infra_hf_66m_nfi_hck", "sysaxi_sel", 11, -+ CLK_IS_CRITICAL), -+ GATE_INFRA2_FLAGS(CLK_INFRA_104M_SPI0, "infra_hf_104m_spi0", "infra_mux_spi0_sel", 12, -+ CLK_IS_CRITICAL), -+ GATE_INFRA2(CLK_INFRA_104M_SPI1, "infra_hf_104m_spi1", "infra_mux_spi1_sel", 13), -+ GATE_INFRA2(CLK_INFRA_104M_SPI2_BCK, "infra_hf_104m_spi2_bck", "infra_mux_spi2_sel", 14), -+ GATE_INFRA2_FLAGS(CLK_INFRA_66M_SPI0_HCK, "infra_hf_66m_spi0_hck", "sysaxi_sel", 15, -+ CLK_IS_CRITICAL), -+ GATE_INFRA2(CLK_INFRA_66M_SPI1_HCK, "infra_hf_66m_spi1_hck", "sysaxi_sel", 16), -+ GATE_INFRA2(CLK_INFRA_66M_SPI2_HCK, "infra_hf_66m_spi2_hck", "sysaxi_sel", 17), -+ GATE_INFRA2(CLK_INFRA_66M_FLASHIF_AXI, "infra_hf_66m_flashif_axi", "sysaxi_sel", 18), -+ GATE_INFRA2_FLAGS(CLK_INFRA_RTC, "infra_f_frtc", "top_rtc_32k", 19, CLK_IS_CRITICAL), -+ GATE_INFRA2(CLK_INFRA_26M_ADC_BCK, "infra_f_26m_adc_bck", "csw_infra_f26m_sel", 20), -+ GATE_INFRA2(CLK_INFRA_RC_ADC, "infra_f_frc_adc", "infra_f_26m_adc_bck", 21), -+ GATE_INFRA2(CLK_INFRA_MSDC400, "infra_f_fmsdc400", "emmc_400m_sel", 22), -+ GATE_INFRA2(CLK_INFRA_MSDC2_HCK, "infra_f_fmsdc2_hck", "emmc_250m_sel", 23), -+ GATE_INFRA2(CLK_INFRA_133M_MSDC_0_HCK, "infra_hf_133m_msdc_0_hck", "sysaxi_sel", 24), -+ GATE_INFRA2(CLK_INFRA_66M_MSDC_0_HCK, "infra_66m_msdc_0_hck", "sysaxi_sel", 25), -+ GATE_INFRA2(CLK_INFRA_133M_CPUM_BCK, "infra_hf_133m_cpum_bck", "sysaxi_sel", 26), -+ GATE_INFRA2(CLK_INFRA_BIST2FPC, "infra_hf_fbist2fpc", "nfi1x_sel", 27), -+ GATE_INFRA2(CLK_INFRA_I2C_X16W_MCK_CK_P1, "infra_hf_i2c_x16w_mck_ck_p1", "sysaxi_sel", 29), -+ GATE_INFRA2(CLK_INFRA_I2C_X16W_PCK_CK_P1, "infra_hf_i2c_x16w_pck_ck_p1", "sysaxi_sel", 31), -+ /* INFRA3 */ -+ GATE_INFRA3(CLK_INFRA_133M_USB_HCK, "infra_133m_usb_hck", "sysaxi_sel", 0), -+ GATE_INFRA3(CLK_INFRA_133M_USB_HCK_CK_P1, "infra_133m_usb_hck_ck_p1", "sysaxi_sel", 1), -+ GATE_INFRA3(CLK_INFRA_66M_USB_HCK, "infra_66m_usb_hck", "sysaxi_sel", 2), -+ GATE_INFRA3(CLK_INFRA_66M_USB_HCK_CK_P1, "infra_66m_usb_hck_ck_p1", "sysaxi_sel", 3), -+ GATE_INFRA3(CLK_INFRA_USB_SYS, "infra_usb_sys", "usb_sys_sel", 4), -+ GATE_INFRA3(CLK_INFRA_USB_SYS_CK_P1, "infra_usb_sys_ck_p1", "usb_sys_p1_sel", 5), -+ GATE_INFRA3(CLK_INFRA_USB_REF, "infra_usb_ref", "top_xtal", 6), -+ GATE_INFRA3(CLK_INFRA_USB_CK_P1, "infra_usb_ck_p1", "top_xtal", 7), -+ GATE_INFRA3_FLAGS(CLK_INFRA_USB_FRMCNT, "infra_usb_frmcnt", "usb_frmcnt_sel", 8, -+ CLK_IS_CRITICAL), -+ GATE_INFRA3_FLAGS(CLK_INFRA_USB_FRMCNT_CK_P1, "infra_usb_frmcnt_ck_p1", "usb_frmcnt_p1_sel", -+ 9, CLK_IS_CRITICAL), -+ GATE_INFRA3(CLK_INFRA_USB_PIPE, "infra_usb_pipe", "sspxtp_sel", 10), -+ GATE_INFRA3(CLK_INFRA_USB_PIPE_CK_P1, "infra_usb_pipe_ck_p1", "usb_phy_sel", 11), -+ GATE_INFRA3(CLK_INFRA_USB_UTMI, "infra_usb_utmi", "top_xtal", 12), -+ GATE_INFRA3(CLK_INFRA_USB_UTMI_CK_P1, "infra_usb_utmi_ck_p1", "top_xtal", 13), -+ GATE_INFRA3(CLK_INFRA_USB_XHCI, "infra_usb_xhci", "usb_xhci_sel", 14), -+ GATE_INFRA3(CLK_INFRA_USB_XHCI_CK_P1, "infra_usb_xhci_ck_p1", "usb_xhci_p1_sel", 15), -+ GATE_INFRA3(CLK_INFRA_PCIE_GFMUX_TL_P0, "infra_pcie_gfmux_tl_ck_p0", -+ "infra_pcie_gfmux_tl_o_p0_sel", 20), -+ GATE_INFRA3(CLK_INFRA_PCIE_GFMUX_TL_P1, "infra_pcie_gfmux_tl_ck_p1", -+ "infra_pcie_gfmux_tl_o_p1_sel", 21), -+ GATE_INFRA3(CLK_INFRA_PCIE_GFMUX_TL_P2, "infra_pcie_gfmux_tl_ck_p2", -+ "infra_pcie_gfmux_tl_o_p2_sel", 22), -+ GATE_INFRA3(CLK_INFRA_PCIE_GFMUX_TL_P3, "infra_pcie_gfmux_tl_ck_p3", -+ "infra_pcie_gfmux_tl_o_p3_sel", 23), -+ GATE_INFRA3(CLK_INFRA_PCIE_PIPE_P0, "infra_pcie_pipe_ck_p0", "top_xtal", 24), -+ GATE_INFRA3(CLK_INFRA_PCIE_PIPE_P1, "infra_pcie_pipe_ck_p1", "top_xtal", 25), -+ GATE_INFRA3(CLK_INFRA_PCIE_PIPE_P2, "infra_pcie_pipe_ck_p2", "top_xtal", 26), -+ GATE_INFRA3(CLK_INFRA_PCIE_PIPE_P3, "infra_pcie_pipe_ck_p3", "top_xtal", 27), -+ GATE_INFRA3(CLK_INFRA_133M_PCIE_CK_P0, "infra_133m_pcie_ck_p0", "sysaxi_sel", 28), -+ GATE_INFRA3(CLK_INFRA_133M_PCIE_CK_P1, "infra_133m_pcie_ck_p1", "sysaxi_sel", 29), -+ GATE_INFRA3(CLK_INFRA_133M_PCIE_CK_P2, "infra_133m_pcie_ck_p2", "sysaxi_sel", 30), -+ GATE_INFRA3(CLK_INFRA_133M_PCIE_CK_P3, "infra_133m_pcie_ck_p3", "sysaxi_sel", 31), -+}; -+ -+static const struct mtk_clk_desc infra_desc = { -+ .clks = infra_clks, -+ .num_clks = ARRAY_SIZE(infra_clks), -+ .mux_clks = infra_muxes, -+ .num_mux_clks = ARRAY_SIZE(infra_muxes), -+ .clk_lock = &mt7988_clk_lock, -+}; -+ -+static const struct of_device_id of_match_clk_mt7988_infracfg[] = { -+ { .compatible = "mediatek,mt7988-infracfg", .data = &infra_desc }, -+ { /* sentinel */ } -+}; -+MODULE_DEVICE_TABLE(of, of_match_clk_mt7988_infracfg); -+ -+static struct platform_driver clk_mt7988_infracfg_drv = { -+ .driver = { -+ .name = "clk-mt7988-infracfg", -+ .of_match_table = of_match_clk_mt7988_infracfg, -+ }, -+ .probe = mtk_clk_simple_probe, -+ .remove = mtk_clk_simple_remove, -+}; -+module_platform_driver(clk_mt7988_infracfg_drv); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/clk/mediatek/clk-mt7988-topckgen.c -@@ -0,0 +1,325 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright (c) 2023 MediaTek Inc. -+ * Author: Sam Shih -+ * Author: Xiufeng Li -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include "clk-mtk.h" -+#include "clk-gate.h" -+#include "clk-mux.h" -+#include -+ -+static DEFINE_SPINLOCK(mt7988_clk_lock); -+ -+static const struct mtk_fixed_clk top_fixed_clks[] = { -+ FIXED_CLK(CLK_TOP_XTAL, "top_xtal", "clkxtal", 40000000), -+}; -+ -+static const struct mtk_fixed_factor top_divs[] = { -+ FACTOR(CLK_TOP_XTAL_D2, "top_xtal_d2", "top_xtal", 1, 2), -+ FACTOR(CLK_TOP_RTC_32K, "top_rtc_32k", "top_xtal", 1, 1250), -+ FACTOR(CLK_TOP_RTC_32P7K, "top_rtc_32p7k", "top_xtal", 1, 1220), -+ FACTOR(CLK_TOP_MPLL_D2, "mpll_d2", "mpll", 1, 2), -+ FACTOR(CLK_TOP_MPLL_D3_D2, "mpll_d3_d2", "mpll", 1, 2), -+ FACTOR(CLK_TOP_MPLL_D4, "mpll_d4", "mpll", 1, 4), -+ FACTOR(CLK_TOP_MPLL_D8, "mpll_d8", "mpll", 1, 8), -+ FACTOR(CLK_TOP_MPLL_D8_D2, "mpll_d8_d2", "mpll", 1, 16), -+ FACTOR(CLK_TOP_MMPLL_D2, "mmpll_d2", "mmpll", 1, 2), -+ FACTOR(CLK_TOP_MMPLL_D3_D5, "mmpll_d3_d5", "mmpll", 1, 15), -+ FACTOR(CLK_TOP_MMPLL_D4, "mmpll_d4", "mmpll", 1, 4), -+ FACTOR(CLK_TOP_MMPLL_D6_D2, "mmpll_d6_d2", "mmpll", 1, 12), -+ FACTOR(CLK_TOP_MMPLL_D8, "mmpll_d8", "mmpll", 1, 8), -+ FACTOR(CLK_TOP_APLL2_D4, "apll2_d4", "apll2", 1, 4), -+ FACTOR(CLK_TOP_NET1PLL_D4, "net1pll_d4", "net1pll", 1, 4), -+ FACTOR(CLK_TOP_NET1PLL_D5, "net1pll_d5", "net1pll", 1, 5), -+ FACTOR(CLK_TOP_NET1PLL_D5_D2, "net1pll_d5_d2", "net1pll", 1, 10), -+ FACTOR(CLK_TOP_NET1PLL_D5_D4, "net1pll_d5_d4", "net1pll", 1, 20), -+ FACTOR(CLK_TOP_NET1PLL_D8, "net1pll_d8", "net1pll", 1, 8), -+ FACTOR(CLK_TOP_NET1PLL_D8_D2, "net1pll_d8_d2", "net1pll", 1, 16), -+ FACTOR(CLK_TOP_NET1PLL_D8_D4, "net1pll_d8_d4", "net1pll", 1, 32), -+ FACTOR(CLK_TOP_NET1PLL_D8_D8, "net1pll_d8_d8", "net1pll", 1, 64), -+ FACTOR(CLK_TOP_NET1PLL_D8_D16, "net1pll_d8_d16", "net1pll", 1, 128), -+ FACTOR(CLK_TOP_NET2PLL_D2, "net2pll_d2", "net2pll", 1, 2), -+ FACTOR(CLK_TOP_NET2PLL_D4, "net2pll_d4", "net2pll", 1, 4), -+ FACTOR(CLK_TOP_NET2PLL_D4_D4, "net2pll_d4_d4", "net2pll", 1, 16), -+ FACTOR(CLK_TOP_NET2PLL_D4_D8, "net2pll_d4_d8", "net2pll", 1, 32), -+ FACTOR(CLK_TOP_NET2PLL_D6, "net2pll_d6", "net2pll", 1, 6), -+ FACTOR(CLK_TOP_NET2PLL_D8, "net2pll_d8", "net2pll", 1, 8), -+}; -+ -+static const char *const netsys_parents[] = { "top_xtal", "net2pll_d2", "mmpll_d2" }; -+static const char *const netsys_500m_parents[] = { "top_xtal", "net1pll_d5", "net1pll_d5_d2" }; -+static const char *const netsys_2x_parents[] = { "top_xtal", "net2pll", "mmpll" }; -+static const char *const netsys_gsw_parents[] = { "top_xtal", "net1pll_d4", "net1pll_d5" }; -+static const char *const eth_gmii_parents[] = { "top_xtal", "net1pll_d5_d4" }; -+static const char *const netsys_mcu_parents[] = { "top_xtal", "net2pll", "mmpll", -+ "net1pll_d4", "net1pll_d5", "mpll" }; -+static const char *const eip197_parents[] = { "top_xtal", "netsyspll", "net2pll", -+ "mmpll", "net1pll_d4", "net1pll_d5" }; -+static const char *const axi_infra_parents[] = { "top_xtal", "net1pll_d8_d2" }; -+static const char *const uart_parents[] = { "top_xtal", "mpll_d8", "mpll_d8_d2" }; -+static const char *const emmc_250m_parents[] = { "top_xtal", "net1pll_d5_d2", "mmpll_d4" }; -+static const char *const emmc_400m_parents[] = { "top_xtal", "msdcpll", "mmpll_d2", -+ "mpll_d2", "mmpll_d4", "net1pll_d8_d2" }; -+static const char *const spi_parents[] = { "top_xtal", "mpll_d2", "mmpll_d4", -+ "net1pll_d8_d2", "net2pll_d6", "net1pll_d5_d4", -+ "mpll_d4", "net1pll_d8_d4" }; -+static const char *const nfi1x_parents[] = { "top_xtal", "mmpll_d4", "net1pll_d8_d2", "net2pll_d6", -+ "mpll_d4", "mmpll_d8", "net1pll_d8_d4", "mpll_d8" }; -+static const char *const spinfi_parents[] = { "top_xtal_d2", "top_xtal", "net1pll_d5_d4", -+ "mpll_d4", "mmpll_d8", "net1pll_d8_d4", -+ "mmpll_d6_d2", "mpll_d8" }; -+static const char *const pwm_parents[] = { "top_xtal", "net1pll_d8_d2", "net1pll_d5_d4", -+ "mpll_d4", "mpll_d8_d2", "top_rtc_32k" }; -+static const char *const i2c_parents[] = { "top_xtal", "net1pll_d5_d4", "mpll_d4", -+ "net1pll_d8_d4" }; -+static const char *const pcie_mbist_250m_parents[] = { "top_xtal", "net1pll_d5_d2" }; -+static const char *const pextp_tl_ck_parents[] = { "top_xtal", "net2pll_d6", "mmpll_d8", -+ "mpll_d8_d2", "top_rtc_32k" }; -+static const char *const usb_frmcnt_parents[] = { "top_xtal", "mmpll_d3_d5" }; -+static const char *const aud_parents[] = { "top_xtal", "apll2" }; -+static const char *const a1sys_parents[] = { "top_xtal", "apll2_d4" }; -+static const char *const aud_l_parents[] = { "top_xtal", "apll2", "mpll_d8_d2" }; -+static const char *const sspxtp_parents[] = { "top_xtal_d2", "mpll_d8_d2" }; -+static const char *const usxgmii_sbus_0_parents[] = { "top_xtal", "net1pll_d8_d4" }; -+static const char *const sgm_0_parents[] = { "top_xtal", "sgmpll" }; -+static const char *const sysapb_parents[] = { "top_xtal", "mpll_d3_d2" }; -+static const char *const eth_refck_50m_parents[] = { "top_xtal", "net2pll_d4_d4" }; -+static const char *const eth_sys_200m_parents[] = { "top_xtal", "net2pll_d4" }; -+static const char *const eth_xgmii_parents[] = { "top_xtal_d2", "net1pll_d8_d8", "net1pll_d8_d16" }; -+static const char *const bus_tops_parents[] = { "top_xtal", "net1pll_d5", "net2pll_d2" }; -+static const char *const npu_tops_parents[] = { "top_xtal", "net2pll" }; -+static const char *const dramc_md32_parents[] = { "top_xtal", "mpll_d2", "wedmcupll" }; -+static const char *const da_xtp_glb_p0_parents[] = { "top_xtal", "net2pll_d8" }; -+static const char *const mcusys_backup_625m_parents[] = { "top_xtal", "net1pll_d4" }; -+static const char *const macsec_parents[] = { "top_xtal", "sgmpll", "net1pll_d8" }; -+static const char *const netsys_tops_400m_parents[] = { "top_xtal", "net2pll_d2" }; -+static const char *const eth_mii_parents[] = { "top_xtal_d2", "net2pll_d4_d8" }; -+ -+static const struct mtk_mux top_muxes[] = { -+ /* CLK_CFG_0 */ -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_SEL, "netsys_sel", netsys_parents, 0x000, 0x004, 0x008, -+ 0, 2, 7, 0x1c0, 0), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_500M_SEL, "netsys_500m_sel", netsys_500m_parents, 0x000, -+ 0x004, 0x008, 8, 2, 15, 0x1C0, 1), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_2X_SEL, "netsys_2x_sel", netsys_2x_parents, 0x000, -+ 0x004, 0x008, 16, 2, 23, 0x1C0, 2), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_GSW_SEL, "netsys_gsw_sel", netsys_gsw_parents, 0x000, -+ 0x004, 0x008, 24, 2, 31, 0x1C0, 3), -+ /* CLK_CFG_1 */ -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_ETH_GMII_SEL, "eth_gmii_sel", eth_gmii_parents, 0x010, 0x014, -+ 0x018, 0, 1, 7, 0x1C0, 4), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_MCU_SEL, "netsys_mcu_sel", netsys_mcu_parents, 0x010, -+ 0x014, 0x018, 8, 3, 15, 0x1C0, 5), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_PAO_2X_SEL, "netsys_pao_2x_sel", netsys_mcu_parents, -+ 0x010, 0x014, 0x018, 16, 3, 23, 0x1C0, 6), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_EIP197_SEL, "eip197_sel", eip197_parents, 0x010, 0x014, 0x018, -+ 24, 3, 31, 0x1c0, 7), -+ /* CLK_CFG_2 */ -+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_AXI_INFRA_SEL, "axi_infra_sel", axi_infra_parents, 0x020, -+ 0x024, 0x028, 0, 1, 7, 0x1C0, 8, CLK_IS_CRITICAL), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_UART_SEL, "uart_sel", uart_parents, 0x020, 0x024, 0x028, 8, 2, -+ 15, 0x1c0, 9), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_EMMC_250M_SEL, "emmc_250m_sel", emmc_250m_parents, 0x020, -+ 0x024, 0x028, 16, 2, 23, 0x1C0, 10), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_EMMC_400M_SEL, "emmc_400m_sel", emmc_400m_parents, 0x020, -+ 0x024, 0x028, 24, 3, 31, 0x1C0, 11), -+ /* CLK_CFG_3 */ -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SPI_SEL, "spi_sel", spi_parents, 0x030, 0x034, 0x038, 0, 3, 7, -+ 0x1c0, 12), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SPIM_MST_SEL, "spim_mst_sel", spi_parents, 0x030, 0x034, 0x038, -+ 8, 3, 15, 0x1c0, 13), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_NFI1X_SEL, "nfi1x_sel", nfi1x_parents, 0x030, 0x034, 0x038, 16, -+ 3, 23, 0x1c0, 14), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SPINFI_SEL, "spinfi_sel", spinfi_parents, 0x030, 0x034, 0x038, -+ 24, 3, 31, 0x1c0, 15), -+ /* CLK_CFG_4 */ -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_PWM_SEL, "pwm_sel", pwm_parents, 0x040, 0x044, 0x048, 0, 3, 7, -+ 0x1c0, 16), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_I2C_SEL, "i2c_sel", i2c_parents, 0x040, 0x044, 0x048, 8, 2, 15, -+ 0x1c0, 17), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_PCIE_MBIST_250M_SEL, "pcie_mbist_250m_sel", -+ pcie_mbist_250m_parents, 0x040, 0x044, 0x048, 16, 1, 23, 0x1C0, 18), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_PEXTP_TL_SEL, "pextp_tl_sel", pextp_tl_ck_parents, 0x040, -+ 0x044, 0x048, 24, 3, 31, 0x1C0, 19), -+ /* CLK_CFG_5 */ -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_PEXTP_TL_P1_SEL, "pextp_tl_p1_sel", pextp_tl_ck_parents, 0x050, -+ 0x054, 0x058, 0, 3, 7, 0x1C0, 20), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_PEXTP_TL_P2_SEL, "pextp_tl_p2_sel", pextp_tl_ck_parents, 0x050, -+ 0x054, 0x058, 8, 3, 15, 0x1C0, 21), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_PEXTP_TL_P3_SEL, "pextp_tl_p3_sel", pextp_tl_ck_parents, 0x050, -+ 0x054, 0x058, 16, 3, 23, 0x1C0, 22), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_USB_SYS_SEL, "usb_sys_sel", eth_gmii_parents, 0x050, 0x054, -+ 0x058, 24, 1, 31, 0x1C0, 23), -+ /* CLK_CFG_6 */ -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_USB_SYS_P1_SEL, "usb_sys_p1_sel", eth_gmii_parents, 0x060, -+ 0x064, 0x068, 0, 1, 7, 0x1C0, 24), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_USB_XHCI_SEL, "usb_xhci_sel", eth_gmii_parents, 0x060, 0x064, -+ 0x068, 8, 1, 15, 0x1C0, 25), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_USB_XHCI_P1_SEL, "usb_xhci_p1_sel", eth_gmii_parents, 0x060, -+ 0x064, 0x068, 16, 1, 23, 0x1C0, 26), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_USB_FRMCNT_SEL, "usb_frmcnt_sel", usb_frmcnt_parents, 0x060, -+ 0x064, 0x068, 24, 1, 31, 0x1C0, 27), -+ /* CLK_CFG_7 */ -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_USB_FRMCNT_P1_SEL, "usb_frmcnt_p1_sel", usb_frmcnt_parents, -+ 0x070, 0x074, 0x078, 0, 1, 7, 0x1C0, 28), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_AUD_SEL, "aud_sel", aud_parents, 0x070, 0x074, 0x078, 8, 1, 15, -+ 0x1c0, 29), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_A1SYS_SEL, "a1sys_sel", a1sys_parents, 0x070, 0x074, 0x078, 16, -+ 1, 23, 0x1c0, 30), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_AUD_L_SEL, "aud_l_sel", aud_l_parents, 0x070, 0x074, 0x078, 24, -+ 2, 31, 0x1c4, 0), -+ /* CLK_CFG_8 */ -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_A_TUNER_SEL, "a_tuner_sel", a1sys_parents, 0x080, 0x084, 0x088, -+ 0, 1, 7, 0x1c4, 1), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SSPXTP_SEL, "sspxtp_sel", sspxtp_parents, 0x080, 0x084, 0x088, -+ 8, 1, 15, 0x1c4, 2), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_USB_PHY_SEL, "usb_phy_sel", sspxtp_parents, 0x080, 0x084, -+ 0x088, 16, 1, 23, 0x1c4, 3), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_USXGMII_SBUS_0_SEL, "usxgmii_sbus_0_sel", -+ usxgmii_sbus_0_parents, 0x080, 0x084, 0x088, 24, 1, 31, 0x1C4, 4), -+ /* CLK_CFG_9 */ -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_USXGMII_SBUS_1_SEL, "usxgmii_sbus_1_sel", -+ usxgmii_sbus_0_parents, 0x090, 0x094, 0x098, 0, 1, 7, 0x1C4, 5), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_0_SEL, "sgm_0_sel", sgm_0_parents, 0x090, 0x094, 0x098, 8, -+ 1, 15, 0x1c4, 6), -+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SGM_SBUS_0_SEL, "sgm_sbus_0_sel", usxgmii_sbus_0_parents, -+ 0x090, 0x094, 0x098, 16, 1, 23, 0x1C4, 7, CLK_IS_CRITICAL), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_1_SEL, "sgm_1_sel", sgm_0_parents, 0x090, 0x094, 0x098, 24, -+ 1, 31, 0x1c4, 8), -+ /* CLK_CFG_10 */ -+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SGM_SBUS_1_SEL, "sgm_sbus_1_sel", usxgmii_sbus_0_parents, -+ 0x0a0, 0x0a4, 0x0a8, 0, 1, 7, 0x1C4, 9, CLK_IS_CRITICAL), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_XFI_PHY_0_XTAL_SEL, "xfi_phy_0_xtal_sel", sspxtp_parents, -+ 0x0a0, 0x0a4, 0x0a8, 8, 1, 15, 0x1C4, 10), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_XFI_PHY_1_XTAL_SEL, "xfi_phy_1_xtal_sel", sspxtp_parents, -+ 0x0a0, 0x0a4, 0x0a8, 16, 1, 23, 0x1C4, 11), -+ /* CLK_CFG_11 */ -+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SYSAXI_SEL, "sysaxi_sel", axi_infra_parents, 0x0a0, -+ 0x0a4, 0x0a8, 24, 1, 31, 0x1C4, 12, CLK_IS_CRITICAL), -+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SYSAPB_SEL, "sysapb_sel", sysapb_parents, 0x0b0, 0x0b4, -+ 0x0b8, 0, 1, 7, 0x1c4, 13, CLK_IS_CRITICAL), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_ETH_REFCK_50M_SEL, "eth_refck_50m_sel", eth_refck_50m_parents, -+ 0x0b0, 0x0b4, 0x0b8, 8, 1, 15, 0x1C4, 14), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_ETH_SYS_200M_SEL, "eth_sys_200m_sel", eth_sys_200m_parents, -+ 0x0b0, 0x0b4, 0x0b8, 16, 1, 23, 0x1C4, 15), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_ETH_SYS_SEL, "eth_sys_sel", pcie_mbist_250m_parents, 0x0b0, -+ 0x0b4, 0x0b8, 24, 1, 31, 0x1C4, 16), -+ /* CLK_CFG_12 */ -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_ETH_XGMII_SEL, "eth_xgmii_sel", eth_xgmii_parents, 0x0c0, -+ 0x0c4, 0x0c8, 0, 2, 7, 0x1C4, 17), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_BUS_TOPS_SEL, "bus_tops_sel", bus_tops_parents, 0x0c0, 0x0c4, -+ 0x0c8, 8, 2, 15, 0x1C4, 18), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_NPU_TOPS_SEL, "npu_tops_sel", npu_tops_parents, 0x0c0, 0x0c4, -+ 0x0c8, 16, 1, 23, 0x1C4, 19), -+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_DRAMC_SEL, "dramc_sel", sspxtp_parents, 0x0c0, 0x0c4, -+ 0x0c8, 24, 1, 31, 0x1C4, 20, CLK_IS_CRITICAL), -+ /* CLK_CFG_13 */ -+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_DRAMC_MD32_SEL, "dramc_md32_sel", dramc_md32_parents, -+ 0x0d0, 0x0d4, 0x0d8, 0, 2, 7, 0x1C4, 21, CLK_IS_CRITICAL), -+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_INFRA_F26M_SEL, "csw_infra_f26m_sel", sspxtp_parents, -+ 0x0d0, 0x0d4, 0x0d8, 8, 1, 15, 0x1C4, 22, CLK_IS_CRITICAL), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_PEXTP_P0_SEL, "pextp_p0_sel", sspxtp_parents, 0x0d0, 0x0d4, -+ 0x0d8, 16, 1, 23, 0x1C4, 23), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_PEXTP_P1_SEL, "pextp_p1_sel", sspxtp_parents, 0x0d0, 0x0d4, -+ 0x0d8, 24, 1, 31, 0x1C4, 24), -+ /* CLK_CFG_14 */ -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_PEXTP_P2_SEL, "pextp_p2_sel", sspxtp_parents, 0x0e0, 0x0e4, -+ 0x0e8, 0, 1, 7, 0x1C4, 25), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_PEXTP_P3_SEL, "pextp_p3_sel", sspxtp_parents, 0x0e0, 0x0e4, -+ 0x0e8, 8, 1, 15, 0x1C4, 26), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_DA_XTP_GLB_P0_SEL, "da_xtp_glb_p0_sel", da_xtp_glb_p0_parents, -+ 0x0e0, 0x0e4, 0x0e8, 16, 1, 23, 0x1C4, 27), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_DA_XTP_GLB_P1_SEL, "da_xtp_glb_p1_sel", da_xtp_glb_p0_parents, -+ 0x0e0, 0x0e4, 0x0e8, 24, 1, 31, 0x1C4, 28), -+ /* CLK_CFG_15 */ -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_DA_XTP_GLB_P2_SEL, "da_xtp_glb_p2_sel", da_xtp_glb_p0_parents, -+ 0x0f0, 0x0f4, 0x0f8, 0, 1, 7, 0x1C4, 29), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_DA_XTP_GLB_P3_SEL, "da_xtp_glb_p3_sel", da_xtp_glb_p0_parents, -+ 0x0f0, 0x0f4, 0x0f8, 8, 1, 15, 0x1C4, 30), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_CKM_SEL, "ckm_sel", sspxtp_parents, 0x0F0, 0x0f4, 0x0f8, 16, 1, -+ 23, 0x1c8, 0), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_DA_SEL, "da_sel", sspxtp_parents, 0x0f0, 0x0f4, 0x0f8, 24, 1, -+ 31, 0x1C8, 1), -+ /* CLK_CFG_16 */ -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_PEXTP_SEL, "pextp_sel", sspxtp_parents, 0x0100, 0x104, 0x108, -+ 0, 1, 7, 0x1c8, 2), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_TOPS_P2_26M_SEL, "tops_p2_26m_sel", sspxtp_parents, 0x0100, -+ 0x104, 0x108, 8, 1, 15, 0x1C8, 3), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_MCUSYS_BACKUP_625M_SEL, "mcusys_backup_625m_sel", -+ mcusys_backup_625m_parents, 0x0100, 0x104, 0x108, 16, 1, 23, 0x1C8, 4), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_SYNC_250M_SEL, "netsys_sync_250m_sel", -+ pcie_mbist_250m_parents, 0x0100, 0x104, 0x108, 24, 1, 31, 0x1c8, 5), -+ /* CLK_CFG_17 */ -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_MACSEC_SEL, "macsec_sel", macsec_parents, 0x0110, 0x114, 0x118, -+ 0, 2, 7, 0x1c8, 6), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_TOPS_400M_SEL, "netsys_tops_400m_sel", -+ netsys_tops_400m_parents, 0x0110, 0x114, 0x118, 8, 1, 15, 0x1c8, 7), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_PPEFB_250M_SEL, "netsys_ppefb_250m_sel", -+ pcie_mbist_250m_parents, 0x0110, 0x114, 0x118, 16, 1, 23, 0x1c8, 8), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_WARP_SEL, "netsys_warp_sel", netsys_parents, 0x0110, -+ 0x114, 0x118, 24, 2, 31, 0x1C8, 9), -+ /* CLK_CFG_18 */ -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_ETH_MII_SEL, "eth_mii_sel", eth_mii_parents, 0x0120, 0x124, -+ 0x128, 0, 1, 7, 0x1c8, 10), -+ MUX_GATE_CLR_SET_UPD(CLK_TOP_NPU_SEL, "ck_npu_sel", netsys_2x_parents, 0x0120, 0x124, 0x128, -+ 8, 2, 15, 0x1c8, 11), -+}; -+ -+static const struct mtk_composite top_aud_divs[] = { -+ DIV_GATE(CLK_TOP_AUD_I2S_M, "aud_i2s_m", "aud_sel", 0x0420, 0, 0x0420, 8, 8), -+}; -+ -+static const struct mtk_clk_desc topck_desc = { -+ .fixed_clks = top_fixed_clks, -+ .num_fixed_clks = ARRAY_SIZE(top_fixed_clks), -+ .factor_clks = top_divs, -+ .num_factor_clks = ARRAY_SIZE(top_divs), -+ .mux_clks = top_muxes, -+ .num_mux_clks = ARRAY_SIZE(top_muxes), -+ .composite_clks = top_aud_divs, -+ .num_composite_clks = ARRAY_SIZE(top_aud_divs), -+ .clk_lock = &mt7988_clk_lock, -+}; -+ -+static const char *const mcu_bus_div_parents[] = { "top_xtal", "ccipll2_b", "net1pll_d4" }; -+ -+static const char *const mcu_arm_div_parents[] = { "top_xtal", "arm_b", "net1pll_d4" }; -+ -+static struct mtk_composite mcu_muxes[] = { -+ /* bus_pll_divider_cfg */ -+ MUX_GATE_FLAGS(CLK_MCU_BUS_DIV_SEL, "mcu_bus_div_sel", mcu_bus_div_parents, 0x7C0, 9, 2, -1, -+ CLK_IS_CRITICAL), -+ /* mp2_pll_divider_cfg */ -+ MUX_GATE_FLAGS(CLK_MCU_ARM_DIV_SEL, "mcu_arm_div_sel", mcu_arm_div_parents, 0x7A8, 9, 2, -1, -+ CLK_IS_CRITICAL), -+}; -+ -+static const struct mtk_clk_desc mcusys_desc = { -+ .composite_clks = mcu_muxes, -+ .num_composite_clks = ARRAY_SIZE(mcu_muxes), -+}; -+ -+static const struct of_device_id of_match_clk_mt7988_topckgen[] = { -+ { .compatible = "mediatek,mt7988-topckgen", .data = &topck_desc }, -+ { .compatible = "mediatek,mt7988-mcusys", .data = &mcusys_desc }, -+ { /* sentinel */ } -+}; -+MODULE_DEVICE_TABLE(of, of_match_clk_mt7988_topckgen); -+ -+static struct platform_driver clk_mt7988_topckgen_drv = { -+ .probe = mtk_clk_simple_probe, -+ .remove = mtk_clk_simple_remove, -+ .driver = { -+ .name = "clk-mt7988-topckgen", -+ .of_match_table = of_match_clk_mt7988_topckgen, -+ }, -+}; -+module_platform_driver(clk_mt7988_topckgen_drv); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/clk/mediatek/clk-mt7988-xfipll.c -@@ -0,0 +1,82 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright (c) 2023 Daniel Golle -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include "clk-mtk.h" -+#include "clk-gate.h" -+#include -+ -+/* Register to control USXGMII XFI PLL analog */ -+#define XFI_PLL_ANA_GLB8 0x108 -+#define RG_XFI_PLL_ANA_SWWA 0x02283248 -+ -+static const struct mtk_gate_regs xfipll_cg_regs = { -+ .set_ofs = 0x8, -+ .clr_ofs = 0x8, -+ .sta_ofs = 0x8, -+}; -+ -+#define GATE_XFIPLL(_id, _name, _parent, _shift) \ -+ { \ -+ .id = _id, \ -+ .name = _name, \ -+ .parent_name = _parent, \ -+ .regs = &xfipll_cg_regs, \ -+ .shift = _shift, \ -+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \ -+ } -+ -+static const struct mtk_fixed_factor xfipll_divs[] = { -+ FACTOR(CLK_XFIPLL_PLL, "xfipll_pll", "top_xtal", 125, 32), -+}; -+ -+static const struct mtk_gate xfipll_clks[] = { -+ GATE_XFIPLL(CLK_XFIPLL_PLL_EN, "xfipll_pll_en", "xfipll_pll", 31), -+}; -+ -+static const struct mtk_clk_desc xfipll_desc = { -+ .clks = xfipll_clks, -+ .num_clks = ARRAY_SIZE(xfipll_clks), -+ .factor_clks = xfipll_divs, -+ .num_factor_clks = ARRAY_SIZE(xfipll_divs), -+}; -+ -+static int clk_mt7988_xfipll_probe(struct platform_device *pdev) -+{ -+ struct device_node *node = pdev->dev.of_node; -+ void __iomem *base = of_iomap(node, 0); -+ -+ if (!base) -+ return -ENOMEM; -+ -+ /* Apply software workaround for USXGMII PLL TCL issue */ -+ writel(RG_XFI_PLL_ANA_SWWA, base + XFI_PLL_ANA_GLB8); -+ iounmap(base); -+ -+ return mtk_clk_simple_probe(pdev); -+}; -+ -+static const struct of_device_id of_match_clk_mt7988_xfipll[] = { -+ { .compatible = "mediatek,mt7988-xfi-pll", .data = &xfipll_desc }, -+ { /* sentinel */ } -+}; -+MODULE_DEVICE_TABLE(of, of_match_clk_mt7988_xfipll); -+ -+static struct platform_driver clk_mt7988_xfipll_drv = { -+ .driver = { -+ .name = "clk-mt7988-xfipll", -+ .of_match_table = of_match_clk_mt7988_xfipll, -+ }, -+ .probe = clk_mt7988_xfipll_probe, -+ .remove = mtk_clk_simple_remove, -+}; -+module_platform_driver(clk_mt7988_xfipll_drv); -+ -+MODULE_DESCRIPTION("MediaTek MT7988 XFI PLL clock driver"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/mediatek/patches-6.1/250-clk-mediatek-add-infracfg-reset-controller-for-mt798.patch b/target/linux/mediatek/patches-6.1/250-clk-mediatek-add-infracfg-reset-controller-for-mt798.patch deleted file mode 100644 index cecf095e92c..00000000000 --- a/target/linux/mediatek/patches-6.1/250-clk-mediatek-add-infracfg-reset-controller-for-mt798.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 26ced94177b150710d94cf365002a09cc48950e9 Mon Sep 17 00:00:00 2001 -From: Frank Wunderlich -Date: Wed, 17 Jan 2024 19:41:11 +0100 -Subject: [PATCH] clk: mediatek: add infracfg reset controller for mt7988 - -Infracfg can also operate as reset controller, add support for it. - -Signed-off-by: Frank Wunderlich ---- - drivers/clk/mediatek/clk-mt7988-infracfg.c | 23 ++++++++++++++++++++++ - 1 file changed, 23 insertions(+) - ---- a/drivers/clk/mediatek/clk-mt7988-infracfg.c -+++ b/drivers/clk/mediatek/clk-mt7988-infracfg.c -@@ -14,6 +14,10 @@ - #include "clk-gate.h" - #include "clk-mux.h" - #include -+#include -+ -+#define MT7988_INFRA_RST0_SET_OFFSET 0x70 -+#define MT7988_INFRA_RST1_SET_OFFSET 0x80 - - static DEFINE_SPINLOCK(mt7988_clk_lock); - -@@ -249,12 +253,31 @@ static const struct mtk_gate infra_clks[ - GATE_INFRA3(CLK_INFRA_133M_PCIE_CK_P3, "infra_133m_pcie_ck_p3", "sysaxi_sel", 31), - }; - -+static u16 infra_rst_ofs[] = { -+ MT7988_INFRA_RST0_SET_OFFSET, -+ MT7988_INFRA_RST1_SET_OFFSET, -+}; -+ -+static u16 infra_idx_map[] = { -+ [MT7988_INFRA_RST0_PEXTP_MAC_SWRST] = 0 * RST_NR_PER_BANK + 6, -+ [MT7988_INFRA_RST1_THERM_CTRL_SWRST] = 1 * RST_NR_PER_BANK + 9, -+}; -+ -+static struct mtk_clk_rst_desc infra_rst_desc = { -+ .version = MTK_RST_SET_CLR, -+ .rst_bank_ofs = infra_rst_ofs, -+ .rst_bank_nr = ARRAY_SIZE(infra_rst_ofs), -+ .rst_idx_map = infra_idx_map, -+ .rst_idx_map_nr = ARRAY_SIZE(infra_idx_map), -+}; -+ - static const struct mtk_clk_desc infra_desc = { - .clks = infra_clks, - .num_clks = ARRAY_SIZE(infra_clks), - .mux_clks = infra_muxes, - .num_mux_clks = ARRAY_SIZE(infra_muxes), - .clk_lock = &mt7988_clk_lock, -+ .rst_desc = &infra_rst_desc, - }; - - static const struct of_device_id of_match_clk_mt7988_infracfg[] = { diff --git a/target/linux/mediatek/patches-6.1/250-dt-bindings-reset-mediatek-add-MT7988-reset-IDs.patch b/target/linux/mediatek/patches-6.1/250-dt-bindings-reset-mediatek-add-MT7988-reset-IDs.patch deleted file mode 100644 index d353074e84a..00000000000 --- a/target/linux/mediatek/patches-6.1/250-dt-bindings-reset-mediatek-add-MT7988-reset-IDs.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 3c810da3206f2e52c92f9f15a87f05db4bbba734 Mon Sep 17 00:00:00 2001 -From: Frank Wunderlich -Date: Wed, 17 Jan 2024 19:41:10 +0100 -Subject: [PATCH] dt-bindings: reset: mediatek: add MT7988 reset IDs - -Add reset constants for using as index in driver and dts. - -Signed-off-by: Frank Wunderlich ---- - include/dt-bindings/reset/mediatek,mt7988-resets.h | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/include/dt-bindings/reset/mediatek,mt7988-resets.h -+++ b/include/dt-bindings/reset/mediatek,mt7988-resets.h -@@ -10,4 +10,10 @@ - /* ETHWARP resets */ - #define MT7988_ETHWARP_RST_SWITCH 0 - -+/* INFRA resets */ -+#define MT7988_INFRA_RST0_PEXTP_MAC_SWRST 0 -+#define MT7988_INFRA_RST1_THERM_CTRL_SWRST 1 -+ -+ - #endif /* _DT_BINDINGS_RESET_CONTROLLER_MT7988 */ -+ diff --git a/target/linux/mediatek/patches-6.1/251-v6.8-watchdog-mediatek-mt7988-add-wdt-support.patch b/target/linux/mediatek/patches-6.1/251-v6.8-watchdog-mediatek-mt7988-add-wdt-support.patch deleted file mode 100644 index cb49ce1d253..00000000000 --- a/target/linux/mediatek/patches-6.1/251-v6.8-watchdog-mediatek-mt7988-add-wdt-support.patch +++ /dev/null @@ -1,125 +0,0 @@ -From 137c9e08e5e542d58aa606b0bb4f0990117309a0 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Mon, 20 Nov 2023 18:22:31 +0000 -Subject: [PATCH] watchdog: mediatek: mt7988: add wdt support - -Add support for watchdog and reset generator unit of the MediaTek -MT7988 SoC. - -Signed-off-by: Daniel Golle -Reviewed-by: AngeloGioacchino Del Regno -Reviewed-by: Guenter Roeck -Link: https://lore.kernel.org/r/c0cf5f701801cce60470853fa15f1d9dced78c4f.1700504385.git.daniel@makrotopia.org -Signed-off-by: Guenter Roeck -Signed-off-by: Wim Van Sebroeck ---- - drivers/watchdog/mtk_wdt.c | 42 ++++++++++++++++++++++++++++++++++++++ - 1 file changed, 42 insertions(+) - ---- a/drivers/watchdog/mtk_wdt.c -+++ b/drivers/watchdog/mtk_wdt.c -@@ -56,9 +56,13 @@ - #define WDT_SWSYSRST 0x18U - #define WDT_SWSYS_RST_KEY 0x88000000 - -+#define WDT_SWSYSRST_EN 0xfc -+ - #define DRV_NAME "mtk-wdt" - #define DRV_VERSION "1.0" - -+#define MT7988_TOPRGU_SW_RST_NUM 24 -+ - static bool nowayout = WATCHDOG_NOWAYOUT; - static unsigned int timeout; - -@@ -68,10 +72,12 @@ struct mtk_wdt_dev { - spinlock_t lock; /* protects WDT_SWSYSRST reg */ - struct reset_controller_dev rcdev; - bool disable_wdt_extrst; -+ bool has_swsysrst_en; - }; - - struct mtk_wdt_data { - int toprgu_sw_rst_num; -+ bool has_swsysrst_en; - }; - - static const struct mtk_wdt_data mt2712_data = { -@@ -82,6 +88,11 @@ static const struct mtk_wdt_data mt7986_ - .toprgu_sw_rst_num = MT7986_TOPRGU_SW_RST_NUM, - }; - -+static const struct mtk_wdt_data mt7988_data = { -+ .toprgu_sw_rst_num = MT7988_TOPRGU_SW_RST_NUM, -+ .has_swsysrst_en = true, -+}; -+ - static const struct mtk_wdt_data mt8183_data = { - .toprgu_sw_rst_num = MT8183_TOPRGU_SW_RST_NUM, - }; -@@ -98,6 +109,28 @@ static const struct mtk_wdt_data mt8195_ - .toprgu_sw_rst_num = MT8195_TOPRGU_SW_RST_NUM, - }; - -+/** -+ * toprgu_reset_sw_en_unlocked() - enable/disable software control for reset bit -+ * @data: Pointer to instance of driver data. -+ * @id: Bit number identifying the reset to be enabled or disabled. -+ * @enable: If true, enable software control for that bit, disable otherwise. -+ * -+ * Context: The caller must hold lock of struct mtk_wdt_dev. -+ */ -+static void toprgu_reset_sw_en_unlocked(struct mtk_wdt_dev *data, -+ unsigned long id, bool enable) -+{ -+ u32 tmp; -+ -+ tmp = readl(data->wdt_base + WDT_SWSYSRST_EN); -+ if (enable) -+ tmp |= BIT(id); -+ else -+ tmp &= ~BIT(id); -+ -+ writel(tmp, data->wdt_base + WDT_SWSYSRST_EN); -+} -+ - static int toprgu_reset_update(struct reset_controller_dev *rcdev, - unsigned long id, bool assert) - { -@@ -108,6 +141,9 @@ static int toprgu_reset_update(struct re - - spin_lock_irqsave(&data->lock, flags); - -+ if (assert && data->has_swsysrst_en) -+ toprgu_reset_sw_en_unlocked(data, id, true); -+ - tmp = readl(data->wdt_base + WDT_SWSYSRST); - if (assert) - tmp |= BIT(id); -@@ -116,6 +152,9 @@ static int toprgu_reset_update(struct re - tmp |= WDT_SWSYS_RST_KEY; - writel(tmp, data->wdt_base + WDT_SWSYSRST); - -+ if (!assert && data->has_swsysrst_en) -+ toprgu_reset_sw_en_unlocked(data, id, false); -+ - spin_unlock_irqrestore(&data->lock, flags); - - return 0; -@@ -393,6 +432,8 @@ static int mtk_wdt_probe(struct platform - wdt_data->toprgu_sw_rst_num); - if (err) - return err; -+ -+ mtk_wdt->has_swsysrst_en = wdt_data->has_swsysrst_en; - } - - mtk_wdt->disable_wdt_extrst = -@@ -427,6 +468,7 @@ static const struct of_device_id mtk_wdt - { .compatible = "mediatek,mt2712-wdt", .data = &mt2712_data }, - { .compatible = "mediatek,mt6589-wdt" }, - { .compatible = "mediatek,mt7986-wdt", .data = &mt7986_data }, -+ { .compatible = "mediatek,mt7988-wdt", .data = &mt7988_data }, - { .compatible = "mediatek,mt8183-wdt", .data = &mt8183_data }, - { .compatible = "mediatek,mt8186-wdt", .data = &mt8186_data }, - { .compatible = "mediatek,mt8192-wdt", .data = &mt8192_data }, diff --git a/target/linux/mediatek/patches-6.1/252-clk-mediatek-mt7988-infracfg-fix-clocks-for-2nd-PCIe.patch b/target/linux/mediatek/patches-6.1/252-clk-mediatek-mt7988-infracfg-fix-clocks-for-2nd-PCIe.patch deleted file mode 100644 index c4760b9eff9..00000000000 --- a/target/linux/mediatek/patches-6.1/252-clk-mediatek-mt7988-infracfg-fix-clocks-for-2nd-PCIe.patch +++ /dev/null @@ -1,31 +0,0 @@ -From c202f510bbaa34ab5d65a69a61e0e72761374b17 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Mon, 11 Mar 2024 17:14:19 +0000 -Subject: [PATCH] clk: mediatek: mt7988-infracfg: fix clocks for 2nd PCIe port - -Due to what seems to be an undocumented oddity in MediaTek's MT7988 -SoC design the CLK_INFRA_PCIE_PERI_26M_CK_P2 clock requires -CLK_INFRA_PCIE_PERI_26M_CK_P3 to be enabled. - -This currently leads to PCIe port 2 not working in Linux. - -Reflect the apparent relationship in the clk driver to make sure PCIe -port 2 of the MT7988 SoC works. - -Suggested-by: Sam Shih -Signed-off-by: Daniel Golle ---- - drivers/clk/mediatek/clk-mt7988-infracfg.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/clk/mediatek/clk-mt7988-infracfg.c -+++ b/drivers/clk/mediatek/clk-mt7988-infracfg.c -@@ -156,7 +156,7 @@ static const struct mtk_gate infra_clks[ - GATE_INFRA0(CLK_INFRA_PCIE_PERI_26M_CK_P1, "infra_pcie_peri_ck_26m_ck_p1", - "csw_infra_f26m_sel", 8), - GATE_INFRA0(CLK_INFRA_PCIE_PERI_26M_CK_P2, "infra_pcie_peri_ck_26m_ck_p2", -- "csw_infra_f26m_sel", 9), -+ "infra_pcie_peri_ck_26m_ck_p3", 9), - GATE_INFRA0(CLK_INFRA_PCIE_PERI_26M_CK_P3, "infra_pcie_peri_ck_26m_ck_p3", - "csw_infra_f26m_sel", 10), - /* INFRA1 */ diff --git a/target/linux/mediatek/patches-6.1/253-pinctrl-mediatek-mt7981-add-additional-uart-group.patch b/target/linux/mediatek/patches-6.1/253-pinctrl-mediatek-mt7981-add-additional-uart-group.patch deleted file mode 100644 index 1e53777d655..00000000000 --- a/target/linux/mediatek/patches-6.1/253-pinctrl-mediatek-mt7981-add-additional-uart-group.patch +++ /dev/null @@ -1,63 +0,0 @@ -From patchwork Wed Jan 17 12:42:33 2024 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -X-Patchwork-Submitter: Jean Thomas -X-Patchwork-Id: 13521682 -Return-Path: - -From: Jean Thomas -To: sean.wang@kernel.org, - linus.walleij@linaro.org, - matthias.bgg@gmail.com, - angelogioacchino.delregno@collabora.com, - linux-mediatek@lists.infradead.org, - linux-gpio@vger.kernel.org, - linux-kernel@vger.kernel.org, - linux-arm-kernel@lists.infradead.org -Cc: Jean Thomas -Subject: [PATCH 1/2] pinctrl: mediatek: mt7981: add additional uart group -Date: Wed, 17 Jan 2024 13:42:33 +0100 -Message-Id: <20240117124234.3137050-1-jean.thomas@wifirst.fr> -MIME-Version: 1.0 -List-Id: - -Add uart1_3 (pins 26, 27) group to the pinctrl driver for the -MediaTek MT7981 SoC. - -Signed-off-by: Jean Thomas -Reviewed-by: Daniel Golle ---- - drivers/pinctrl/mediatek/pinctrl-mt7981.c | 7 ++++++- - 1 file changed, 6 insertions(+), 1 deletion(-) - ---- a/drivers/pinctrl/mediatek/pinctrl-mt7981.c -+++ b/drivers/pinctrl/mediatek/pinctrl-mt7981.c -@@ -737,6 +737,9 @@ static int mt7981_uart1_1_funcs[] = { 2, - static int mt7981_uart1_2_pins[] = { 9, 10, }; - static int mt7981_uart1_2_funcs[] = { 2, 2, }; - -+static int mt7981_uart1_3_pins[] = { 26, 27, }; -+static int mt7981_uart1_3_funcs[] = { 2, 2, }; -+ - /* UART2 */ - static int mt7981_uart2_1_pins[] = { 22, 23, 24, 25, }; - static int mt7981_uart2_1_funcs[] = { 3, 3, 3, 3, }; -@@ -871,6 +874,8 @@ static const struct group_desc mt7981_gr - PINCTRL_PIN_GROUP("uart1_1", mt7981_uart1_1), - /* @GPIO(9,10): UART1(2) */ - PINCTRL_PIN_GROUP("uart1_2", mt7981_uart1_2), -+ /* @GPIO(26,27): UART1(2) */ -+ PINCTRL_PIN_GROUP("uart1_3", mt7981_uart1_3), - /* @GPIO(22,25): UART1(3) */ - PINCTRL_PIN_GROUP("uart2_1", mt7981_uart2_1), - /* @GPIO(22,24) PTA_EXT(4) */ -@@ -933,7 +938,7 @@ static const struct group_desc mt7981_gr - static const char *mt7981_wa_aice_groups[] = { "wa_aice1", "wa_aice2", "wm_aice1_1", - "wa_aice3", "wm_aice1_2", }; - static const char *mt7981_uart_groups[] = { "net_wo0_uart_txd_0", "net_wo0_uart_txd_1", -- "net_wo0_uart_txd_2", "uart0", "uart1_0", "uart1_1", "uart1_2", "uart2_0", -+ "net_wo0_uart_txd_2", "uart0", "uart1_0", "uart1_1", "uart1_2", "uart1_3", "uart2_0", - "uart2_0_tx_rx", "uart2_1", "wm_uart_0", "wm_aurt_1", "wm_aurt_2", }; - static const char *mt7981_dfd_groups[] = { "dfd", "dfd_ntrst", }; - static const char *mt7981_wdt_groups[] = { "watchdog", "watchdog1", }; diff --git a/target/linux/mediatek/patches-6.1/254-pinctrl-mediatek-mt7981-add-additional-emmc-group.patch b/target/linux/mediatek/patches-6.1/254-pinctrl-mediatek-mt7981-add-additional-emmc-group.patch deleted file mode 100644 index df4d82c9d94..00000000000 --- a/target/linux/mediatek/patches-6.1/254-pinctrl-mediatek-mt7981-add-additional-emmc-group.patch +++ /dev/null @@ -1,82 +0,0 @@ -From patchwork Wed Jan 17 14:55:47 2024 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -X-Patchwork-Submitter: Jean Thomas -X-Patchwork-Id: 13521855 -Return-Path: - -From: Jean Thomas -To: sean.wang@kernel.org, - linus.walleij@linaro.org, - matthias.bgg@gmail.com, - angelogioacchino.delregno@collabora.com, - linux-mediatek@lists.infradead.org, - linux-gpio@vger.kernel.org, - linux-kernel@vger.kernel.org, - linux-arm-kernel@lists.infradead.org -Cc: Jean Thomas , - Daniel Golle -Subject: [PATCH v2 2/2] pinctrl: mediatek: mt7981: add additional emmc groups -Date: Wed, 17 Jan 2024 15:55:47 +0100 -Message-Id: <20240117145547.3354242-1-jean.thomas@wifirst.fr> -List-Id: - -Add new emmc groups in the pinctrl driver for the -MediaTek MT7981 SoC: -* emmc reset, with pin 15. -* emmc 4-bit bus-width, with pins 16 to 19, and 24 to 25. -* emmc 8-bit bus-width, with pins 16 to 25. - -The existing emmc_45 group is kept for legacy reasons, even -if this is the union of emmc_reset and emmc_8 groups. - -Signed-off-by: Jean Thomas -Reviewed-by: Daniel Golle ---- - drivers/pinctrl/mediatek/pinctrl-mt7981.c | 17 ++++++++++++++++- - 1 file changed, 16 insertions(+), 1 deletion(-) - --- -2.39.2 - ---- a/drivers/pinctrl/mediatek/pinctrl-mt7981.c -+++ b/drivers/pinctrl/mediatek/pinctrl-mt7981.c -@@ -700,6 +700,15 @@ static int mt7981_drv_vbus_pins[] = { 14 - static int mt7981_drv_vbus_funcs[] = { 1, }; - - /* EMMC */ -+static int mt7981_emmc_reset_pins[] = { 15, }; -+static int mt7981_emmc_reset_funcs[] = { 2, }; -+ -+static int mt7981_emmc_4_pins[] = { 16, 17, 18, 19, 24, 25, }; -+static int mt7981_emmc_4_funcs[] = { 2, 2, 2, 2, 2, 2, }; -+ -+static int mt7981_emmc_8_pins[] = { 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, }; -+static int mt7981_emmc_8_funcs[] = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, }; -+ - static int mt7981_emmc_45_pins[] = { 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, }; - static int mt7981_emmc_45_funcs[] = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, }; - -@@ -854,6 +863,12 @@ static const struct group_desc mt7981_gr - PINCTRL_PIN_GROUP("udi", mt7981_udi), - /* @GPIO(14) DRV_VBUS(1) */ - PINCTRL_PIN_GROUP("drv_vbus", mt7981_drv_vbus), -+ /* @GPIO(15): EMMC_RSTB(2) */ -+ PINCTRL_PIN_GROUP("emmc_reset", mt7981_emmc_reset), -+ /* @GPIO(16,17,18,19,24,25): EMMC_DATx, EMMC_CLK, EMMC_CMD */ -+ PINCTRL_PIN_GROUP("emmc_4", mt7981_emmc_4), -+ /* @GPIO(16,17,18,19,20,21,22,23,24,25): EMMC_DATx, EMMC_CLK, EMMC_CMD */ -+ PINCTRL_PIN_GROUP("emmc_8", mt7981_emmc_8), - /* @GPIO(15,25): EMMC(2) */ - PINCTRL_PIN_GROUP("emmc_45", mt7981_emmc_45), - /* @GPIO(16,21): SNFI(3) */ -@@ -957,7 +972,7 @@ static const char *mt7981_i2c_groups[] = - static const char *mt7981_pcm_groups[] = { "pcm", }; - static const char *mt7981_udi_groups[] = { "udi", }; - static const char *mt7981_usb_groups[] = { "drv_vbus", }; --static const char *mt7981_flash_groups[] = { "emmc_45", "snfi", }; -+static const char *mt7981_flash_groups[] = { "emmc_reset", "emmc_4", "emmc_8", "emmc_45", "snfi", }; - static const char *mt7981_ethernet_groups[] = { "smi_mdc_mdio", "gbe_ext_mdc_mdio", - "wf0_mode1", "wf0_mode3", "mt7531_int", }; - static const char *mt7981_ant_groups[] = { "ant_sel", }; diff --git a/target/linux/mediatek/patches-6.1/320-v6.2-mmc-mediatek-add-support-for-MT7986-SoC.patch b/target/linux/mediatek/patches-6.1/320-v6.2-mmc-mediatek-add-support-for-MT7986-SoC.patch deleted file mode 100644 index 5e3afd856f7..00000000000 --- a/target/linux/mediatek/patches-6.1/320-v6.2-mmc-mediatek-add-support-for-MT7986-SoC.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 24e961b93d292d0dd6380213d22a071a99ea787d Mon Sep 17 00:00:00 2001 -From: Sam Shih -Date: Tue, 25 Oct 2022 15:29:53 +0200 -Subject: [PATCH 1/6] mmc: mediatek: add support for MT7986 SoC - -Adding mt7986 own characteristics and of_device_id to have support -of MT7986 SoC. - -Signed-off-by: Sam Shih -Signed-off-by: Frank Wunderlich -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20221025132953.81286-7-linux@fw-web.de -Signed-off-by: Ulf Hansson ---- - drivers/mmc/host/mtk-sd.c | 14 ++++++++++++++ - 1 file changed, 14 insertions(+) - ---- a/drivers/mmc/host/mtk-sd.c -+++ b/drivers/mmc/host/mtk-sd.c -@@ -552,6 +552,19 @@ static const struct mtk_mmc_compatible m - .support_64g = false, - }; - -+static const struct mtk_mmc_compatible mt7986_compat = { -+ .clk_div_bits = 12, -+ .recheck_sdio_irq = true, -+ .hs400_tune = false, -+ .pad_tune_reg = MSDC_PAD_TUNE0, -+ .async_fifo = true, -+ .data_tune = true, -+ .busy_check = true, -+ .stop_clk_fix = true, -+ .enhance_rx = true, -+ .support_64g = true, -+}; -+ - static const struct mtk_mmc_compatible mt8135_compat = { - .clk_div_bits = 8, - .recheck_sdio_irq = true, -@@ -609,6 +622,7 @@ static const struct of_device_id msdc_of - { .compatible = "mediatek,mt6795-mmc", .data = &mt6795_compat}, - { .compatible = "mediatek,mt7620-mmc", .data = &mt7620_compat}, - { .compatible = "mediatek,mt7622-mmc", .data = &mt7622_compat}, -+ { .compatible = "mediatek,mt7986-mmc", .data = &mt7986_compat}, - { .compatible = "mediatek,mt8135-mmc", .data = &mt8135_compat}, - { .compatible = "mediatek,mt8173-mmc", .data = &mt8173_compat}, - { .compatible = "mediatek,mt8183-mmc", .data = &mt8183_compat}, diff --git a/target/linux/mediatek/patches-6.1/321-v6.2-mmc-mtk-sd-add-Inline-Crypto-Engine-clock-control.patch b/target/linux/mediatek/patches-6.1/321-v6.2-mmc-mtk-sd-add-Inline-Crypto-Engine-clock-control.patch deleted file mode 100644 index db2802bd0f4..00000000000 --- a/target/linux/mediatek/patches-6.1/321-v6.2-mmc-mtk-sd-add-Inline-Crypto-Engine-clock-control.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 7b438d0377fbd520b475a68bdd9de1692393f22d Mon Sep 17 00:00:00 2001 -From: Mengqi Zhang -Date: Sun, 6 Nov 2022 11:39:24 +0800 -Subject: [PATCH 2/6] mmc: mtk-sd: add Inline Crypto Engine clock control - -Add crypto clock control and ungate it before CQHCI init. - -Signed-off-by: Mengqi Zhang -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20221106033924.9854-2-mengqi.zhang@mediatek.com -Signed-off-by: Ulf Hansson ---- - drivers/mmc/host/mtk-sd.c | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - ---- a/drivers/mmc/host/mtk-sd.c -+++ b/drivers/mmc/host/mtk-sd.c -@@ -452,6 +452,7 @@ struct msdc_host { - struct clk *bus_clk; /* bus clock which used to access register */ - struct clk *src_clk_cg; /* msdc source clock control gate */ - struct clk *sys_clk_cg; /* msdc subsys clock control gate */ -+ struct clk *crypto_clk; /* msdc crypto clock control gate */ - struct clk_bulk_data bulk_clks[MSDC_NR_CLOCKS]; - u32 mclk; /* mmc subsystem clock frequency */ - u32 src_clk_freq; /* source clock frequency */ -@@ -840,6 +841,7 @@ static void msdc_set_busy_timeout(struct - static void msdc_gate_clock(struct msdc_host *host) - { - clk_bulk_disable_unprepare(MSDC_NR_CLOCKS, host->bulk_clks); -+ clk_disable_unprepare(host->crypto_clk); - clk_disable_unprepare(host->src_clk_cg); - clk_disable_unprepare(host->src_clk); - clk_disable_unprepare(host->bus_clk); -@@ -855,6 +857,7 @@ static int msdc_ungate_clock(struct msdc - clk_prepare_enable(host->bus_clk); - clk_prepare_enable(host->src_clk); - clk_prepare_enable(host->src_clk_cg); -+ clk_prepare_enable(host->crypto_clk); - ret = clk_bulk_prepare_enable(MSDC_NR_CLOCKS, host->bulk_clks); - if (ret) { - dev_err(host->dev, "Cannot enable pclk/axi/ahb clock gates\n"); -@@ -2670,6 +2673,15 @@ static int msdc_drv_probe(struct platfor - goto host_free; - } - -+ /* only eMMC has crypto property */ -+ if (!(mmc->caps2 & MMC_CAP2_NO_MMC)) { -+ host->crypto_clk = devm_clk_get_optional(&pdev->dev, "crypto"); -+ if (IS_ERR(host->crypto_clk)) -+ host->crypto_clk = NULL; -+ else -+ mmc->caps2 |= MMC_CAP2_CRYPTO; -+ } -+ - host->irq = platform_get_irq(pdev, 0); - if (host->irq < 0) { - ret = host->irq; diff --git a/target/linux/mediatek/patches-6.1/322-v6.2-mmc-mtk-sd-fix-two-spelling-mistakes-in-comment.patch b/target/linux/mediatek/patches-6.1/322-v6.2-mmc-mtk-sd-fix-two-spelling-mistakes-in-comment.patch deleted file mode 100644 index 921d249f8cc..00000000000 --- a/target/linux/mediatek/patches-6.1/322-v6.2-mmc-mtk-sd-fix-two-spelling-mistakes-in-comment.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 4b323f02b6e8df1b04292635ef829e7f723bf50e Mon Sep 17 00:00:00 2001 -From: Yu Zhe -Date: Thu, 10 Nov 2022 15:28:19 +0800 -Subject: [PATCH 3/6] mmc: mtk-sd: fix two spelling mistakes in comment - -spelling mistake fix : "alreay" -> "already" - "checksume" -> "checksum" - -Signed-off-by: Yu Zhe -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20221110072819.11530-1-yuzhe@nfschina.com -Signed-off-by: Ulf Hansson ---- - drivers/mmc/host/mtk-sd.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/mmc/host/mtk-sd.c -+++ b/drivers/mmc/host/mtk-sd.c -@@ -750,7 +750,7 @@ static inline void msdc_dma_setup(struct - else - bd[j].bd_info &= ~BDMA_DESC_EOL; - -- /* checksume need to clear first */ -+ /* checksum need to clear first */ - bd[j].bd_info &= ~BDMA_DESC_CHECKSUM; - bd[j].bd_info |= msdc_dma_calcs((u8 *)(&bd[j]), 16) << 8; - } -@@ -1229,7 +1229,7 @@ static bool msdc_cmd_done(struct msdc_ho - !host->hs400_tuning)) - /* - * should not clear fifo/interrupt as the tune data -- * may have alreay come when cmd19/cmd21 gets response -+ * may have already come when cmd19/cmd21 gets response - * CRC error. - */ - msdc_reset_hw(host); diff --git a/target/linux/mediatek/patches-6.1/323-v6.2-mmc-Avoid-open-coding-by-using-mmc_op_tuning.patch b/target/linux/mediatek/patches-6.1/323-v6.2-mmc-Avoid-open-coding-by-using-mmc_op_tuning.patch deleted file mode 100644 index 8e2151e16bd..00000000000 --- a/target/linux/mediatek/patches-6.1/323-v6.2-mmc-Avoid-open-coding-by-using-mmc_op_tuning.patch +++ /dev/null @@ -1,39 +0,0 @@ -From b98e7e8daf0ebab9dcc36812378a71e1be0b5089 Mon Sep 17 00:00:00 2001 -From: ChanWoo Lee -Date: Thu, 24 Nov 2022 17:00:31 +0900 -Subject: [PATCH 4/6] mmc: Avoid open coding by using mmc_op_tuning() - -Replace code with the already defined function. No functional changes. - -Signed-off-by: ChanWoo Lee -Reviewed-by: Adrian Hunter -Link: https://lore.kernel.org/r/20221124080031.14690-1-cw9316.lee@samsung.com -Signed-off-by: Ulf Hansson ---- - drivers/mmc/host/mtk-sd.c | 8 ++------ - 1 file changed, 2 insertions(+), 6 deletions(-) - ---- a/drivers/mmc/host/mtk-sd.c -+++ b/drivers/mmc/host/mtk-sd.c -@@ -1224,9 +1224,7 @@ static bool msdc_cmd_done(struct msdc_ho - - if (!sbc_error && !(events & MSDC_INT_CMDRDY)) { - if (events & MSDC_INT_CMDTMO || -- (cmd->opcode != MMC_SEND_TUNING_BLOCK && -- cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200 && -- !host->hs400_tuning)) -+ (!mmc_op_tuning(cmd->opcode) && !host->hs400_tuning)) - /* - * should not clear fifo/interrupt as the tune data - * may have already come when cmd19/cmd21 gets response -@@ -1320,9 +1318,7 @@ static void msdc_cmd_next(struct msdc_ho - { - if ((cmd->error && - !(cmd->error == -EILSEQ && -- (cmd->opcode == MMC_SEND_TUNING_BLOCK || -- cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200 || -- host->hs400_tuning))) || -+ (mmc_op_tuning(cmd->opcode) || host->hs400_tuning))) || - (mrq->sbc && mrq->sbc->error)) - msdc_request_done(host, mrq); - else if (cmd == mrq->sbc) diff --git a/target/linux/mediatek/patches-6.1/330-snand-mtk-bmt-support.patch b/target/linux/mediatek/patches-6.1/330-snand-mtk-bmt-support.patch deleted file mode 100644 index 55a308e46cf..00000000000 --- a/target/linux/mediatek/patches-6.1/330-snand-mtk-bmt-support.patch +++ /dev/null @@ -1,34 +0,0 @@ ---- a/drivers/mtd/nand/spi/core.c -+++ b/drivers/mtd/nand/spi/core.c -@@ -19,6 +19,7 @@ - #include - #include - #include -+#include - - static int spinand_read_reg_op(struct spinand_device *spinand, u8 reg, u8 *val) - { -@@ -1344,6 +1345,7 @@ static int spinand_probe(struct spi_mem - if (ret) - return ret; - -+ mtk_bmt_attach(mtd); - ret = mtd_device_register(mtd, NULL, 0); - if (ret) - goto err_spinand_cleanup; -@@ -1351,6 +1353,7 @@ static int spinand_probe(struct spi_mem - return 0; - - err_spinand_cleanup: -+ mtk_bmt_detach(mtd); - spinand_cleanup(spinand); - - return ret; -@@ -1369,6 +1372,7 @@ static int spinand_remove(struct spi_mem - if (ret) - return ret; - -+ mtk_bmt_detach(mtd); - spinand_cleanup(spinand); - - return 0; diff --git a/target/linux/mediatek/patches-6.1/331-mt7622-rfb1-enable-bmt.patch b/target/linux/mediatek/patches-6.1/331-mt7622-rfb1-enable-bmt.patch deleted file mode 100644 index a6f98fdf83f..00000000000 --- a/target/linux/mediatek/patches-6.1/331-mt7622-rfb1-enable-bmt.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts -@@ -549,6 +549,7 @@ - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - nand-ecc-engine = <&snfi>; -+ mediatek,bmt-v2; - - partitions { - compatible = "fixed-partitions"; diff --git a/target/linux/mediatek/patches-6.1/340-mtd-spinand-Add-support-for-the-Fidelix-FM35X1GA.patch b/target/linux/mediatek/patches-6.1/340-mtd-spinand-Add-support-for-the-Fidelix-FM35X1GA.patch deleted file mode 100644 index ec66363dc9d..00000000000 --- a/target/linux/mediatek/patches-6.1/340-mtd-spinand-Add-support-for-the-Fidelix-FM35X1GA.patch +++ /dev/null @@ -1,122 +0,0 @@ -From 5f49a5c9b16330e0df8f639310e4715dcad71947 Mon Sep 17 00:00:00 2001 -From: Davide Fioravanti -Date: Fri, 8 Jan 2021 15:35:24 +0100 -Subject: [PATCH] mtd: spinand: Add support for the Fidelix FM35X1GA - -Datasheet: http://www.hobos.com.cn/upload/datasheet/DS35X1GAXXX_100_rev00.pdf - -Signed-off-by: Davide Fioravanti ---- - drivers/mtd/nand/spi/Makefile | 2 +- - drivers/mtd/nand/spi/core.c | 1 + - drivers/mtd/nand/spi/fidelix.c | 76 ++++++++++++++++++++++++++++++++++ - include/linux/mtd/spinand.h | 1 + - 4 files changed, 79 insertions(+), 1 deletion(-) - create mode 100644 drivers/mtd/nand/spi/fidelix.c - ---- a/drivers/mtd/nand/spi/Makefile -+++ b/drivers/mtd/nand/spi/Makefile -@@ -1,3 +1,3 @@ - # SPDX-License-Identifier: GPL-2.0 --spinand-objs := core.o ato.o esmt.o etron.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o -+spinand-objs := core.o ato.o esmt.o etron.o fidelix.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o - obj-$(CONFIG_MTD_SPI_NAND) += spinand.o ---- a/drivers/mtd/nand/spi/core.c -+++ b/drivers/mtd/nand/spi/core.c -@@ -940,6 +940,7 @@ static const struct nand_ops spinand_ops - static const struct spinand_manufacturer *spinand_manufacturers[] = { - &ato_spinand_manufacturer, - &esmt_c8_spinand_manufacturer, -+ &fidelix_spinand_manufacturer, - &etron_spinand_manufacturer, - &gigadevice_spinand_manufacturer, - ¯onix_spinand_manufacturer, ---- /dev/null -+++ b/drivers/mtd/nand/spi/fidelix.c -@@ -0,0 +1,76 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright (c) 2020 Davide Fioravanti -+ */ -+ -+#include -+#include -+#include -+ -+#define SPINAND_MFR_FIDELIX 0xE5 -+#define FIDELIX_ECCSR_MASK 0x0F -+ -+static SPINAND_OP_VARIANTS(read_cache_variants, -+ SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0), -+ SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0), -+ SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0)); -+ -+static SPINAND_OP_VARIANTS(write_cache_variants, -+ SPINAND_PROG_LOAD_X4(true, 0, NULL, 0), -+ SPINAND_PROG_LOAD(true, 0, NULL, 0)); -+ -+static SPINAND_OP_VARIANTS(update_cache_variants, -+ SPINAND_PROG_LOAD_X4(false, 0, NULL, 0), -+ SPINAND_PROG_LOAD(false, 0, NULL, 0)); -+ -+static int fm35x1ga_ooblayout_ecc(struct mtd_info *mtd, int section, -+ struct mtd_oob_region *region) -+{ -+ if (section > 3) -+ return -ERANGE; -+ -+ region->offset = (16 * section) + 8; -+ region->length = 8; -+ -+ return 0; -+} -+ -+static int fm35x1ga_ooblayout_free(struct mtd_info *mtd, int section, -+ struct mtd_oob_region *region) -+{ -+ if (section > 3) -+ return -ERANGE; -+ -+ region->offset = (16 * section) + 2; -+ region->length = 6; -+ -+ return 0; -+} -+ -+static const struct mtd_ooblayout_ops fm35x1ga_ooblayout = { -+ .ecc = fm35x1ga_ooblayout_ecc, -+ .free = fm35x1ga_ooblayout_free, -+}; -+ -+static const struct spinand_info fidelix_spinand_table[] = { -+ SPINAND_INFO("FM35X1GA", -+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x71), -+ NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1), -+ NAND_ECCREQ(4, 512), -+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants, -+ &write_cache_variants, -+ &update_cache_variants), -+ SPINAND_HAS_QE_BIT, -+ SPINAND_ECCINFO(&fm35x1ga_ooblayout, NULL)), -+}; -+ -+static const struct spinand_manufacturer_ops fidelix_spinand_manuf_ops = { -+}; -+ -+const struct spinand_manufacturer fidelix_spinand_manufacturer = { -+ .id = SPINAND_MFR_FIDELIX, -+ .name = "Fidelix", -+ .chips = fidelix_spinand_table, -+ .nchips = ARRAY_SIZE(fidelix_spinand_table), -+ .ops = &fidelix_spinand_manuf_ops, -+}; ---- a/include/linux/mtd/spinand.h -+++ b/include/linux/mtd/spinand.h -@@ -263,6 +263,7 @@ struct spinand_manufacturer { - extern const struct spinand_manufacturer ato_spinand_manufacturer; - extern const struct spinand_manufacturer esmt_c8_spinand_manufacturer; - extern const struct spinand_manufacturer etron_spinand_manufacturer; -+extern const struct spinand_manufacturer fidelix_spinand_manufacturer; - extern const struct spinand_manufacturer gigadevice_spinand_manufacturer; - extern const struct spinand_manufacturer macronix_spinand_manufacturer; - extern const struct spinand_manufacturer micron_spinand_manufacturer; diff --git a/target/linux/mediatek/patches-6.1/350-21-cpufreq-mediatek-Add-support-for-MT7988.patch b/target/linux/mediatek/patches-6.1/350-21-cpufreq-mediatek-Add-support-for-MT7988.patch deleted file mode 100644 index 96bc7cebd06..00000000000 --- a/target/linux/mediatek/patches-6.1/350-21-cpufreq-mediatek-Add-support-for-MT7988.patch +++ /dev/null @@ -1,61 +0,0 @@ -From patchwork Fri Apr 19 16:59:07 2024 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -X-Patchwork-Submitter: Daniel Golle -X-Patchwork-Id: 13636668 -Return-Path: - -Date: Fri, 19 Apr 2024 17:59:07 +0100 -From: Daniel Golle -To: "Rafael J. Wysocki" , - Viresh Kumar , - Matthias Brugger , - AngeloGioacchino Del Regno , - linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org, - linux-arm-kernel@lists.infradead.org, - linux-mediatek@lists.infradead.org -Subject: [PATCH] cpufreq: mediatek: Add support for MT7988A -Message-ID: - -Content-Disposition: inline -List-Id: - -From: Sam Shih - -This add cpufreq support for mediatek MT7988A SoC. - -The platform data of MT7988A is different from previous MediaTek SoCs, -so we add a new compatible and platform data for it. - -Signed-off-by: Sam Shih ---- - drivers/cpufreq/mediatek-cpufreq.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/drivers/cpufreq/mediatek-cpufreq.c -+++ b/drivers/cpufreq/mediatek-cpufreq.c -@@ -709,6 +709,15 @@ static const struct mtk_cpufreq_platform - .ccifreq_supported = false, - }; - -+static const struct mtk_cpufreq_platform_data mt7988_platform_data = { -+ .min_volt_shift = 100000, -+ .max_volt_shift = 200000, -+ .proc_max_volt = 900000, -+ .sram_min_volt = 0, -+ .sram_max_volt = 1150000, -+ .ccifreq_supported = true, -+}; -+ - static const struct mtk_cpufreq_platform_data mt8183_platform_data = { - .min_volt_shift = 100000, - .max_volt_shift = 200000, -@@ -742,6 +751,7 @@ static const struct of_device_id mtk_cpu - { .compatible = "mediatek,mt2712", .data = &mt2701_platform_data }, - { .compatible = "mediatek,mt7622", .data = &mt7622_platform_data }, - { .compatible = "mediatek,mt7623", .data = &mt7623_platform_data }, -+ { .compatible = "mediatek,mt7988a", .data = &mt7988_platform_data }, - { .compatible = "mediatek,mt8167", .data = &mt8516_platform_data }, - { .compatible = "mediatek,mt817x", .data = &mt2701_platform_data }, - { .compatible = "mediatek,mt8173", .data = &mt2701_platform_data }, diff --git a/target/linux/mediatek/patches-6.1/351-pinctrl-add-mt7988-pd-pulltype-support.patch b/target/linux/mediatek/patches-6.1/351-pinctrl-add-mt7988-pd-pulltype-support.patch deleted file mode 100644 index 1fcb1e64c7d..00000000000 --- a/target/linux/mediatek/patches-6.1/351-pinctrl-add-mt7988-pd-pulltype-support.patch +++ /dev/null @@ -1,99 +0,0 @@ ---- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c -+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c -@@ -601,6 +601,30 @@ out: - return err; - } - -+static int mtk_pinconf_bias_set_pd(struct mtk_pinctrl *hw, -+ const struct mtk_pin_desc *desc, -+ u32 pullup, u32 arg) -+{ -+ int err, pd; -+ -+ if (arg == MTK_DISABLE) -+ pd = 0; -+ else if ((arg == MTK_ENABLE) && pullup) -+ pd = 0; -+ else if ((arg == MTK_ENABLE) && !pullup) -+ pd = 1; -+ else { -+ err = -EINVAL; -+ goto out; -+ } -+ -+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PD, pd); -+ -+out: -+ return err; -+ -+} -+ - static int mtk_pinconf_bias_set_pullsel_pullen(struct mtk_pinctrl *hw, - const struct mtk_pin_desc *desc, - u32 pullup, u32 arg) -@@ -755,6 +779,12 @@ int mtk_pinconf_bias_set_combo(struct mt - return err; - } - -+ if (try_all_type & MTK_PULL_PD_TYPE) { -+ err = mtk_pinconf_bias_set_pd(hw, desc, pullup, arg); -+ if (!err) -+ return err; -+ } -+ - if (try_all_type & MTK_PULL_PU_PD_TYPE) { - err = mtk_pinconf_bias_set_pu_pd(hw, desc, pullup, arg); - if (!err) -@@ -875,6 +905,29 @@ out: - return err; - } - -+static int mtk_pinconf_bias_get_pd(struct mtk_pinctrl *hw, -+ const struct mtk_pin_desc *desc, -+ u32 *pullup, u32 *enable) -+{ -+ int err, pd; -+ -+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PD, &pd); -+ if (err) -+ goto out; -+ -+ if (pd == 0) { -+ *pullup = 0; -+ *enable = MTK_DISABLE; -+ } else if (pd == 1) { -+ *pullup = 0; -+ *enable = MTK_ENABLE; -+ } else -+ err = -EINVAL; -+ -+out: -+ return err; -+} -+ - static int mtk_pinconf_bias_get_pullsel_pullen(struct mtk_pinctrl *hw, - const struct mtk_pin_desc *desc, - u32 *pullup, u32 *enable) -@@ -943,6 +996,12 @@ int mtk_pinconf_bias_get_combo(struct mt - if (!err) - return err; - } -+ -+ if (try_all_type & MTK_PULL_PD_TYPE) { -+ err = mtk_pinconf_bias_get_pd(hw, desc, pullup, enable); -+ if (!err) -+ return err; -+ } - - if (try_all_type & MTK_PULL_PU_PD_TYPE) { - err = mtk_pinconf_bias_get_pu_pd(hw, desc, pullup, enable); ---- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h -+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h -@@ -24,6 +24,7 @@ - * turned on/off itself. But it can't be selected pull up/down - */ - #define MTK_PULL_RSEL_TYPE BIT(3) -+#define MTK_PULL_PD_TYPE BIT(4) - /* MTK_PULL_PU_PD_RSEL_TYPE is a type which is controlled by - * MTK_PULL_PU_PD_TYPE and MTK_PULL_RSEL_TYPE. - */ diff --git a/target/linux/mediatek/patches-6.1/400-crypto-add-eip97-inside-secure-support.patch b/target/linux/mediatek/patches-6.1/400-crypto-add-eip97-inside-secure-support.patch deleted file mode 100644 index 25ca9485e41..00000000000 --- a/target/linux/mediatek/patches-6.1/400-crypto-add-eip97-inside-secure-support.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/drivers/crypto/inside-secure/safexcel.c -+++ b/drivers/crypto/inside-secure/safexcel.c -@@ -600,6 +600,14 @@ static int safexcel_hw_init(struct safex - val |= EIP197_MST_CTRL_TX_MAX_CMD(5); - writel(val, EIP197_HIA_AIC(priv) + EIP197_HIA_MST_CTRL); - } -+ /* -+ * Set maximum number of TX commands to 2^4 = 16 for EIP97 HW2.1/HW2.3 -+ */ -+ else { -+ val = 0; -+ val |= EIP97_MST_CTRL_TX_MAX_CMD(4); -+ writel(val, EIP197_HIA_AIC(priv) + EIP197_HIA_MST_CTRL); -+ } - - /* Configure wr/rd cache values */ - writel(EIP197_MST_CTRL_RD_CACHE(RD_CACHE_4BITS) | ---- a/drivers/crypto/inside-secure/safexcel.h -+++ b/drivers/crypto/inside-secure/safexcel.h -@@ -315,6 +315,7 @@ - #define EIP197_MST_CTRL_RD_CACHE(n) (((n) & 0xf) << 0) - #define EIP197_MST_CTRL_WD_CACHE(n) (((n) & 0xf) << 4) - #define EIP197_MST_CTRL_TX_MAX_CMD(n) (((n) & 0xf) << 20) -+#define EIP97_MST_CTRL_TX_MAX_CMD(n) (((n) & 0xf) << 4) - #define EIP197_MST_CTRL_BYTE_SWAP BIT(24) - #define EIP197_MST_CTRL_NO_BYTE_SWAP BIT(25) - #define EIP197_MST_CTRL_BYTE_SWAP_BITS GENMASK(25, 24) diff --git a/target/linux/mediatek/patches-6.1/401-crypto-fix-eip97-cache-incoherent.patch b/target/linux/mediatek/patches-6.1/401-crypto-fix-eip97-cache-incoherent.patch deleted file mode 100644 index 186c66f6878..00000000000 --- a/target/linux/mediatek/patches-6.1/401-crypto-fix-eip97-cache-incoherent.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/crypto/inside-secure/safexcel.h -+++ b/drivers/crypto/inside-secure/safexcel.h -@@ -737,6 +737,9 @@ enum safexcel_eip_version { - /* Priority we use for advertising our algorithms */ - #define SAFEXCEL_CRA_PRIORITY 300 - -+/* System cache line size */ -+#define SYSTEM_CACHELINE_SIZE 64 -+ - /* SM3 digest result for zero length message */ - #define EIP197_SM3_ZEROM_HASH "\x1A\xB2\x1D\x83\x55\xCF\xA1\x7F" \ - "\x8E\x61\x19\x48\x31\xE8\x1A\x8F" \ ---- a/drivers/crypto/inside-secure/safexcel_hash.c -+++ b/drivers/crypto/inside-secure/safexcel_hash.c -@@ -55,9 +55,9 @@ struct safexcel_ahash_req { - u8 block_sz; /* block size, only set once */ - u8 digest_sz; /* output digest size, only set once */ - __le32 state[SHA3_512_BLOCK_SIZE / -- sizeof(__le32)] __aligned(sizeof(__le32)); -+ sizeof(__le32)] __aligned(SYSTEM_CACHELINE_SIZE); - -- u64 len; -+ u64 len __aligned(SYSTEM_CACHELINE_SIZE); - u64 processed; - - u8 cache[HASH_CACHE_SIZE] __aligned(sizeof(u32)); diff --git a/target/linux/mediatek/patches-6.1/405-v6.2-mt7986-trng-add-rng-support.patch b/target/linux/mediatek/patches-6.1/405-v6.2-mt7986-trng-add-rng-support.patch deleted file mode 100644 index 615a1a1d714..00000000000 --- a/target/linux/mediatek/patches-6.1/405-v6.2-mt7986-trng-add-rng-support.patch +++ /dev/null @@ -1,43 +0,0 @@ -From f1da27b7c4191f78ed81d3dabf64c769f896296c Mon Sep 17 00:00:00 2001 -From: "Mingming.Su" -Date: Sat, 8 Oct 2022 18:45:53 +0200 -Subject: [PATCH] hwrng: mtk - add mt7986 support - -1. Add trng compatible name for MT7986 -2. Fix mtk_rng_wait_ready() function - -Signed-off-by: Mingming.Su -Signed-off-by: Frank Wunderlich -Signed-off-by: Herbert Xu ---- - drivers/char/hw_random/mtk-rng.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - ---- a/drivers/char/hw_random/mtk-rng.c -+++ b/drivers/char/hw_random/mtk-rng.c -@@ -22,7 +22,7 @@ - #define RNG_AUTOSUSPEND_TIMEOUT 100 - - #define USEC_POLL 2 --#define TIMEOUT_POLL 20 -+#define TIMEOUT_POLL 60 - - #define RNG_CTRL 0x00 - #define RNG_EN BIT(0) -@@ -77,7 +77,7 @@ static bool mtk_rng_wait_ready(struct hw - readl_poll_timeout_atomic(priv->base + RNG_CTRL, ready, - ready & RNG_READY, USEC_POLL, - TIMEOUT_POLL); -- return !!ready; -+ return !!(ready & RNG_READY); - } - - static int mtk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait) -@@ -179,6 +179,7 @@ static const struct dev_pm_ops mtk_rng_p - #endif /* CONFIG_PM */ - - static const struct of_device_id mtk_rng_match[] = { -+ { .compatible = "mediatek,mt7986-rng" }, - { .compatible = "mediatek,mt7623-rng" }, - {}, - }; diff --git a/target/linux/mediatek/patches-6.1/410-bt-mtk-serial-fix.patch b/target/linux/mediatek/patches-6.1/410-bt-mtk-serial-fix.patch deleted file mode 100644 index fa232b5d4e5..00000000000 --- a/target/linux/mediatek/patches-6.1/410-bt-mtk-serial-fix.patch +++ /dev/null @@ -1,33 +0,0 @@ ---- a/drivers/tty/serial/8250/8250.h -+++ b/drivers/tty/serial/8250/8250.h -@@ -86,6 +86,7 @@ struct serial8250_config { - * STOP PARITY EPAR SPAR WLEN5 WLEN6 - */ - #define UART_CAP_NOTEMT BIT(18) /* UART without interrupt on TEMT available */ -+#define UART_CAP_NMOD BIT(19) /* UART doesn't do termios */ - - #define UART_BUG_QUOT BIT(0) /* UART has buggy quot LSB */ - #define UART_BUG_TXEN BIT(1) /* UART has buggy TX IIR status */ ---- a/drivers/tty/serial/8250/8250_port.c -+++ b/drivers/tty/serial/8250/8250_port.c -@@ -287,7 +287,7 @@ static const struct serial8250_config ua - .tx_loadsz = 16, - .fcr = UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, -- .flags = UART_CAP_FIFO, -+ .flags = UART_CAP_FIFO | UART_CAP_NMOD, - }, - [PORT_NPCM] = { - .name = "Nuvoton 16550", -@@ -2767,6 +2767,11 @@ serial8250_do_set_termios(struct uart_po - unsigned long flags; - unsigned int baud, quot, frac = 0; - -+ if (up->capabilities & UART_CAP_NMOD) { -+ termios->c_cflag = 0; -+ return; -+ } -+ - if (up->capabilities & UART_CAP_MINI) { - termios->c_cflag &= ~(CSTOPB | PARENB | PARODD | CMSPAR); - if ((termios->c_cflag & CSIZE) == CS5 || diff --git a/target/linux/mediatek/patches-6.1/431-drivers-spi-mt65xx-Move-chip_config-to-driver-s-priv.patch b/target/linux/mediatek/patches-6.1/431-drivers-spi-mt65xx-Move-chip_config-to-driver-s-priv.patch deleted file mode 100644 index 95fc7f46682..00000000000 --- a/target/linux/mediatek/patches-6.1/431-drivers-spi-mt65xx-Move-chip_config-to-driver-s-priv.patch +++ /dev/null @@ -1,130 +0,0 @@ -From bfd3acc428085742d754a6d328d1a93ebf9451df Mon Sep 17 00:00:00 2001 -From: "SkyLake.Huang" -Date: Thu, 23 Jun 2022 18:29:51 +0800 -Subject: [PATCH 1/6] drivers: spi-mt65xx: Move chip_config to driver's private - data - -Signed-off-by: SkyLake.Huang ---- - drivers/spi/spi-mt65xx.c | 29 +++++++++--------------- - include/linux/platform_data/spi-mt65xx.h | 17 -------------- - 2 files changed, 11 insertions(+), 35 deletions(-) - delete mode 100644 include/linux/platform_data/spi-mt65xx.h - ---- a/drivers/spi/spi-mt65xx.c -+++ b/drivers/spi/spi-mt65xx.c -@@ -14,7 +14,6 @@ - #include - #include - #include --#include - #include - #include - #include -@@ -171,6 +170,8 @@ struct mtk_spi { - struct device *dev; - dma_addr_t tx_dma; - dma_addr_t rx_dma; -+ u32 sample_sel; -+ u32 get_tick_dly; - }; - - static const struct mtk_spi_compatible mtk_common_compat; -@@ -216,15 +217,6 @@ static const struct mtk_spi_compatible m - .no_need_unprepare = true, - }; - --/* -- * A piece of default chip info unless the platform -- * supplies it. -- */ --static const struct mtk_chip_config mtk_default_chip_info = { -- .sample_sel = 0, -- .tick_delay = 0, --}; -- - static const struct of_device_id mtk_spi_of_match[] = { - { .compatible = "mediatek,spi-ipm", - .data = (void *)&mtk_ipm_compat, -@@ -352,7 +344,6 @@ static int mtk_spi_hw_init(struct spi_ma - { - u16 cpha, cpol; - u32 reg_val; -- struct mtk_chip_config *chip_config = spi->controller_data; - struct mtk_spi *mdata = spi_master_get_devdata(master); - - cpha = spi->mode & SPI_CPHA ? 1 : 0; -@@ -402,7 +393,7 @@ static int mtk_spi_hw_init(struct spi_ma - else - reg_val &= ~SPI_CMD_CS_POL; - -- if (chip_config->sample_sel) -+ if (mdata->sample_sel) - reg_val |= SPI_CMD_SAMPLE_SEL; - else - reg_val &= ~SPI_CMD_SAMPLE_SEL; -@@ -429,20 +420,20 @@ static int mtk_spi_hw_init(struct spi_ma - if (mdata->dev_comp->ipm_design) { - reg_val = readl(mdata->base + SPI_CMD_REG); - reg_val &= ~SPI_CMD_IPM_GET_TICKDLY_MASK; -- reg_val |= ((chip_config->tick_delay & 0x7) -+ reg_val |= ((mdata->get_tick_dly & 0x7) - << SPI_CMD_IPM_GET_TICKDLY_OFFSET); - writel(reg_val, mdata->base + SPI_CMD_REG); - } else { - reg_val = readl(mdata->base + SPI_CFG1_REG); - reg_val &= ~SPI_CFG1_GET_TICK_DLY_MASK; -- reg_val |= ((chip_config->tick_delay & 0x7) -+ reg_val |= ((mdata->get_tick_dly & 0x7) - << SPI_CFG1_GET_TICK_DLY_OFFSET); - writel(reg_val, mdata->base + SPI_CFG1_REG); - } - } else { - reg_val = readl(mdata->base + SPI_CFG1_REG); - reg_val &= ~SPI_CFG1_GET_TICK_DLY_MASK_V1; -- reg_val |= ((chip_config->tick_delay & 0x3) -+ reg_val |= ((mdata->get_tick_dly & 0x3) - << SPI_CFG1_GET_TICK_DLY_OFFSET_V1); - writel(reg_val, mdata->base + SPI_CFG1_REG); - } -@@ -732,9 +723,6 @@ static int mtk_spi_setup(struct spi_devi - { - struct mtk_spi *mdata = spi_master_get_devdata(spi->master); - -- if (!spi->controller_data) -- spi->controller_data = (void *)&mtk_default_chip_info; -- - if (mdata->dev_comp->need_pad_sel && spi->cs_gpiod) - /* CS de-asserted, gpiolib will handle inversion */ - gpiod_direction_output(spi->cs_gpiod, 0); -@@ -1140,6 +1128,10 @@ static int mtk_spi_probe(struct platform - mdata = spi_master_get_devdata(master); - mdata->dev_comp = device_get_match_data(dev); - -+ /* Set device configs to default first. Calibrate it later. */ -+ mdata->sample_sel = 0; -+ mdata->get_tick_dly = 2; -+ - if (mdata->dev_comp->enhance_timing) - master->mode_bits |= SPI_CS_HIGH; - ---- a/include/linux/platform_data/spi-mt65xx.h -+++ /dev/null -@@ -1,17 +0,0 @@ --/* SPDX-License-Identifier: GPL-2.0-only */ --/* -- * MTK SPI bus driver definitions -- * -- * Copyright (c) 2015 MediaTek Inc. -- * Author: Leilk Liu -- */ -- --#ifndef ____LINUX_PLATFORM_DATA_SPI_MTK_H --#define ____LINUX_PLATFORM_DATA_SPI_MTK_H -- --/* Board specific platform_data */ --struct mtk_chip_config { -- u32 sample_sel; -- u32 tick_delay; --}; --#endif diff --git a/target/linux/mediatek/patches-6.1/432-drivers-spi-Add-support-for-dynamic-calibration.patch b/target/linux/mediatek/patches-6.1/432-drivers-spi-Add-support-for-dynamic-calibration.patch deleted file mode 100644 index b2c9df4386a..00000000000 --- a/target/linux/mediatek/patches-6.1/432-drivers-spi-Add-support-for-dynamic-calibration.patch +++ /dev/null @@ -1,236 +0,0 @@ -From 2ade0172154e50c8a2bfd8634c6eff943cffea29 Mon Sep 17 00:00:00 2001 -From: "SkyLake.Huang" -Date: Thu, 23 Jun 2022 18:35:52 +0800 -Subject: [PATCH 2/6] drivers: spi: Add support for dynamic calibration - -Signed-off-by: SkyLake.Huang ---- - drivers/spi/spi.c | 137 ++++++++++++++++++++++++++++++++++++++++ - include/linux/spi/spi.h | 42 ++++++++++++ - 2 files changed, 179 insertions(+) - ---- a/drivers/spi/spi.c -+++ b/drivers/spi/spi.c -@@ -1385,6 +1385,70 @@ static int spi_transfer_wait(struct spi_ - return 0; - } - -+int spi_do_calibration(struct spi_controller *ctlr, struct spi_device *spi, -+ int (*cal_read)(void *priv, u32 *addr, int addrlen, u8 *buf, int readlen), void *drv_priv) -+{ -+ int datalen = ctlr->cal_rule->datalen; -+ int addrlen = ctlr->cal_rule->addrlen; -+ u8 *buf; -+ int ret; -+ int i; -+ struct list_head *cal_head, *listptr; -+ struct spi_cal_target *target; -+ -+ /* Calculate calibration result */ -+ int hit_val, total_hit, origin; -+ bool hit; -+ -+ /* Make sure we can start calibration */ -+ if(!ctlr->cal_target || !ctlr->cal_rule || !ctlr->append_caldata) -+ return 0; -+ -+ buf = kzalloc(datalen * sizeof(u8), GFP_KERNEL); -+ if(!buf) -+ return -ENOMEM; -+ -+ ret = ctlr->append_caldata(ctlr); -+ if (ret) -+ goto cal_end; -+ -+ cal_head = ctlr->cal_target; -+ list_for_each(listptr, cal_head) { -+ target = list_entry(listptr, struct spi_cal_target, list); -+ -+ hit = false; -+ hit_val = 0; -+ total_hit = 0; -+ origin = *target->cal_item; -+ -+ for(i=target->cal_min; i<=target->cal_max; i+=target->step) { -+ *target->cal_item = i; -+ ret = (*cal_read)(drv_priv, ctlr->cal_rule->addr, addrlen, buf, datalen); -+ if(ret) -+ break; -+ dev_dbg(&spi->dev, "controller cal item value: 0x%x\n", i); -+ if(memcmp(ctlr->cal_rule->match_data, buf, datalen * sizeof(u8)) == 0) { -+ hit = true; -+ hit_val += i; -+ total_hit++; -+ dev_dbg(&spi->dev, "golden data matches data read!\n"); -+ } -+ } -+ if(hit) { -+ *target->cal_item = DIV_ROUND_CLOSEST(hit_val, total_hit); -+ dev_info(&spi->dev, "calibration result: 0x%x", *target->cal_item); -+ } else { -+ *target->cal_item = origin; -+ dev_warn(&spi->dev, "calibration failed, fallback to default: 0x%x", origin); -+ } -+ } -+ -+cal_end: -+ kfree(buf); -+ return ret? ret: 0; -+} -+EXPORT_SYMBOL_GPL(spi_do_calibration); -+ - static void _spi_transfer_delay_ns(u32 ns) - { - if (!ns) -@@ -2223,6 +2287,75 @@ void spi_flush_queue(struct spi_controll - /*-------------------------------------------------------------------------*/ - - #if defined(CONFIG_OF) -+static inline void alloc_cal_data(struct list_head **cal_target, -+ struct spi_cal_rule **cal_rule, bool enable) -+{ -+ if(enable) { -+ *cal_target = kmalloc(sizeof(struct list_head), GFP_KERNEL); -+ INIT_LIST_HEAD(*cal_target); -+ *cal_rule = kmalloc(sizeof(struct spi_cal_rule), GFP_KERNEL); -+ } else { -+ kfree(*cal_target); -+ kfree(*cal_rule); -+ } -+} -+ -+static int of_spi_parse_cal_dt(struct spi_controller *ctlr, struct spi_device *spi, -+ struct device_node *nc) -+{ -+ u32 value; -+ int rc; -+ const char *cal_mode; -+ -+ rc = of_property_read_bool(nc, "spi-cal-enable"); -+ if (rc) -+ alloc_cal_data(&ctlr->cal_target, &ctlr->cal_rule, true); -+ else -+ return 0; -+ -+ rc = of_property_read_string(nc, "spi-cal-mode", &cal_mode); -+ if(!rc) { -+ if(strcmp("read-data", cal_mode) == 0){ -+ ctlr->cal_rule->mode = SPI_CAL_READ_DATA; -+ } else if(strcmp("read-pp", cal_mode) == 0) { -+ ctlr->cal_rule->mode = SPI_CAL_READ_PP; -+ return 0; -+ } else if(strcmp("read-sfdp", cal_mode) == 0){ -+ ctlr->cal_rule->mode = SPI_CAL_READ_SFDP; -+ return 0; -+ } -+ } else -+ goto err; -+ -+ ctlr->cal_rule->datalen = 0; -+ rc = of_property_read_u32(nc, "spi-cal-datalen", &value); -+ if(!rc && value > 0) { -+ ctlr->cal_rule->datalen = value; -+ -+ ctlr->cal_rule->match_data = kzalloc(value * sizeof(u8), GFP_KERNEL); -+ rc = of_property_read_u8_array(nc, "spi-cal-data", -+ ctlr->cal_rule->match_data, value); -+ if(rc) -+ kfree(ctlr->cal_rule->match_data); -+ } -+ -+ rc = of_property_read_u32(nc, "spi-cal-addrlen", &value); -+ if(!rc && value > 0) { -+ ctlr->cal_rule->addrlen = value; -+ -+ ctlr->cal_rule->addr = kzalloc(value * sizeof(u32), GFP_KERNEL); -+ rc = of_property_read_u32_array(nc, "spi-cal-addr", -+ ctlr->cal_rule->addr, value); -+ if(rc) -+ kfree(ctlr->cal_rule->addr); -+ } -+ return 0; -+ -+err: -+ alloc_cal_data(&ctlr->cal_target, &ctlr->cal_rule, false); -+ return 0; -+} -+ - static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, - struct device_node *nc) - { -@@ -2341,6 +2474,10 @@ of_register_spi_device(struct spi_contro - if (rc) - goto err_out; - -+ rc = of_spi_parse_cal_dt(ctlr, spi, nc); -+ if (rc) -+ goto err_out; -+ - /* Store a pointer to the node in the device structure */ - of_node_get(nc); - spi->dev.of_node = nc; ---- a/include/linux/spi/spi.h -+++ b/include/linux/spi/spi.h -@@ -318,6 +318,40 @@ struct spi_driver { - struct device_driver driver; - }; - -+enum { -+ SPI_CAL_READ_DATA = 0, -+ SPI_CAL_READ_PP = 1, /* only for SPI-NAND */ -+ SPI_CAL_READ_SFDP = 2, /* only for SPI-NOR */ -+}; -+ -+struct nand_addr { -+ unsigned int lun; -+ unsigned int plane; -+ unsigned int eraseblock; -+ unsigned int page; -+ unsigned int dataoffs; -+}; -+ -+/** -+ * Read calibration rule from device dts node. -+ * Once calibration result matches the rule, we regard is as success. -+ */ -+struct spi_cal_rule { -+ int datalen; -+ u8 *match_data; -+ int addrlen; -+ u32 *addr; -+ int mode; -+}; -+ -+struct spi_cal_target { -+ u32 *cal_item; -+ int cal_min; /* min of cal_item */ -+ int cal_max; /* max of cal_item */ -+ int step; /* Increase/decrease cal_item */ -+ struct list_head list; -+}; -+ - static inline struct spi_driver *to_spi_driver(struct device_driver *drv) - { - return drv ? container_of(drv, struct spi_driver, driver) : NULL; -@@ -703,6 +737,11 @@ struct spi_controller { - void *dummy_rx; - void *dummy_tx; - -+ /* For calibration */ -+ int (*append_caldata)(struct spi_controller *ctlr); -+ struct list_head *cal_target; -+ struct spi_cal_rule *cal_rule; -+ - int (*fw_translate_cs)(struct spi_controller *ctlr, unsigned cs); - - /* -@@ -1510,6 +1549,9 @@ spi_register_board_info(struct spi_board - { return 0; } - #endif - -+extern int spi_do_calibration(struct spi_controller *ctlr, -+ struct spi_device *spi, int (*cal_read)(void *, u32 *, int, u8 *, int), void *drv_priv); -+ - /* If you're hotplugging an adapter with devices (parport, usb, etc) - * use spi_new_device() to describe each device. You can also call - * spi_unregister_device() to start making that device vanish, but diff --git a/target/linux/mediatek/patches-6.1/433-drivers-spi-mem-Add-spi-calibration-hook.patch b/target/linux/mediatek/patches-6.1/433-drivers-spi-mem-Add-spi-calibration-hook.patch deleted file mode 100644 index e87d63db698..00000000000 --- a/target/linux/mediatek/patches-6.1/433-drivers-spi-mem-Add-spi-calibration-hook.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 06640a5da2973318c06e516da16a5b579622e7c5 Mon Sep 17 00:00:00 2001 -From: "SkyLake.Huang" -Date: Thu, 23 Jun 2022 18:37:55 +0800 -Subject: [PATCH 3/6] drivers: spi-mem: Add spi calibration hook - -Signed-off-by: SkyLake.Huang ---- - drivers/spi/spi-mem.c | 8 ++++++++ - include/linux/spi/spi-mem.h | 4 ++++ - 2 files changed, 12 insertions(+) - ---- a/drivers/spi/spi-mem.c -+++ b/drivers/spi/spi-mem.c -@@ -419,6 +419,14 @@ int spi_mem_exec_op(struct spi_mem *mem, - } - EXPORT_SYMBOL_GPL(spi_mem_exec_op); - -+int spi_mem_do_calibration(struct spi_mem *mem, -+ int (*cal_read)(void *priv, u32 *addr, int addrlen, u8 *buf, int readlen), -+ void *priv) -+{ -+ return spi_do_calibration(mem->spi->controller, mem->spi, cal_read, priv); -+} -+EXPORT_SYMBOL_GPL(spi_mem_do_calibration); -+ - /** - * spi_mem_get_name() - Return the SPI mem device name to be used by the - * upper layer if necessary ---- a/include/linux/spi/spi-mem.h -+++ b/include/linux/spi/spi-mem.h -@@ -366,6 +366,10 @@ bool spi_mem_supports_op(struct spi_mem - int spi_mem_exec_op(struct spi_mem *mem, - const struct spi_mem_op *op); - -+int spi_mem_do_calibration(struct spi_mem *mem, -+ int (*cal_read)(void *, u32 *, int, u8 *, int), -+ void *priv); -+ - const char *spi_mem_get_name(struct spi_mem *mem); - - struct spi_mem_dirmap_desc * diff --git a/target/linux/mediatek/patches-6.1/434-drivers-spi-mt65xx-Add-controller-s-calibration-para.patch b/target/linux/mediatek/patches-6.1/434-drivers-spi-mt65xx-Add-controller-s-calibration-para.patch deleted file mode 100644 index dbdb1947aa2..00000000000 --- a/target/linux/mediatek/patches-6.1/434-drivers-spi-mt65xx-Add-controller-s-calibration-para.patch +++ /dev/null @@ -1,43 +0,0 @@ -From d278c7a0bf730318a7ccf8d0a8b434c813e23fd0 Mon Sep 17 00:00:00 2001 -From: "SkyLake.Huang" -Date: Thu, 23 Jun 2022 18:39:03 +0800 -Subject: [PATCH 4/6] drivers: spi-mt65xx: Add controller's calibration - paramter - -Signed-off-by: SkyLake.Huang ---- - drivers/spi/spi-mt65xx.c | 16 ++++++++++++++++ - 1 file changed, 16 insertions(+) - ---- a/drivers/spi/spi-mt65xx.c -+++ b/drivers/spi/spi-mt65xx.c -@@ -834,6 +834,21 @@ static irqreturn_t mtk_spi_interrupt(int - return IRQ_HANDLED; - } - -+static int mtk_spi_append_caldata(struct spi_controller *ctlr) -+{ -+ struct spi_cal_target *cal_target = kmalloc(sizeof(*cal_target), GFP_KERNEL); -+ struct mtk_spi *mdata = spi_master_get_devdata(ctlr); -+ -+ cal_target->cal_item = &mdata->get_tick_dly; -+ cal_target->cal_min = 0; -+ cal_target->cal_max = 7; -+ cal_target->step = 1; -+ -+ list_add(&cal_target->list, ctlr->cal_target); -+ -+ return 0; -+} -+ - static int mtk_spi_mem_adjust_op_size(struct spi_mem *mem, - struct spi_mem_op *op) - { -@@ -1124,6 +1139,7 @@ static int mtk_spi_probe(struct platform - master->setup = mtk_spi_setup; - master->set_cs_timing = mtk_spi_set_hw_cs_timing; - master->use_gpio_descriptors = true; -+ master->append_caldata = mtk_spi_append_caldata; - - mdata = spi_master_get_devdata(master); - mdata->dev_comp = device_get_match_data(dev); diff --git a/target/linux/mediatek/patches-6.1/435-drivers-mtd-spinand-Add-calibration-support-for-spin.patch b/target/linux/mediatek/patches-6.1/435-drivers-mtd-spinand-Add-calibration-support-for-spin.patch deleted file mode 100644 index 3991d8925a4..00000000000 --- a/target/linux/mediatek/patches-6.1/435-drivers-mtd-spinand-Add-calibration-support-for-spin.patch +++ /dev/null @@ -1,81 +0,0 @@ -From 7670ec4a14891a1a182b98a9c403ffbf6b49e4b1 Mon Sep 17 00:00:00 2001 -From: "SkyLake.Huang" -Date: Thu, 23 Jun 2022 18:39:56 +0800 -Subject: [PATCH 5/6] drivers: mtd: spinand: Add calibration support for - spinand - -Signed-off-by: SkyLake.Huang ---- - drivers/mtd/nand/spi/core.c | 54 +++++++++++++++++++++++++++++++++++++ - 1 file changed, 54 insertions(+) - ---- a/drivers/mtd/nand/spi/core.c -+++ b/drivers/mtd/nand/spi/core.c -@@ -978,6 +978,56 @@ static int spinand_manufacturer_match(st - return -ENOTSUPP; - } - -+int spinand_cal_read(void *priv, u32 *addr, int addrlen, u8 *buf, int readlen) { -+ struct spinand_device *spinand = (struct spinand_device *)priv; -+ struct device *dev = &spinand->spimem->spi->dev; -+ struct spi_mem_op op = SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, buf, readlen); -+ struct nand_pos pos; -+ struct nand_page_io_req req; -+ u8 status; -+ int ret; -+ -+ if(addrlen != sizeof(struct nand_addr)/sizeof(unsigned int)) { -+ dev_err(dev, "Must provide correct addr(length) for spinand calibration\n"); -+ return -EINVAL; -+ } -+ -+ ret = spinand_reset_op(spinand); -+ if (ret) -+ return ret; -+ -+ /* We should store our golden data in first target because -+ * we can't switch target at this moment. -+ */ -+ pos = (struct nand_pos){ -+ .target = 0, -+ .lun = *addr, -+ .plane = *(addr+1), -+ .eraseblock = *(addr+2), -+ .page = *(addr+3), -+ }; -+ -+ req = (struct nand_page_io_req){ -+ .pos = pos, -+ .dataoffs = *(addr+4), -+ .datalen = readlen, -+ .databuf.in = buf, -+ .mode = MTD_OPS_AUTO_OOB, -+ }; -+ -+ ret = spinand_load_page_op(spinand, &req); -+ if (ret) -+ return ret; -+ -+ ret = spinand_wait(spinand, &status); -+ if (ret < 0) -+ return ret; -+ -+ ret = spi_mem_exec_op(spinand->spimem, &op); -+ -+ return 0; -+} -+ - static int spinand_id_detect(struct spinand_device *spinand) - { - u8 *id = spinand->id.data; -@@ -1228,6 +1278,10 @@ static int spinand_init(struct spinand_d - if (!spinand->scratchbuf) - return -ENOMEM; - -+ ret = spi_mem_do_calibration(spinand->spimem, spinand_cal_read, spinand); -+ if (ret) -+ dev_err(dev, "Failed to calibrate SPI-NAND (err = %d)\n", ret); -+ - ret = spinand_detect(spinand); - if (ret) - goto err_free_bufs; diff --git a/target/linux/mediatek/patches-6.1/436-drivers-mtd-spi-nor-Add-calibration-support-for-spi-.patch b/target/linux/mediatek/patches-6.1/436-drivers-mtd-spi-nor-Add-calibration-support-for-spi-.patch deleted file mode 100644 index ac8a55e1879..00000000000 --- a/target/linux/mediatek/patches-6.1/436-drivers-mtd-spi-nor-Add-calibration-support-for-spi-.patch +++ /dev/null @@ -1,57 +0,0 @@ -From f3fe3b15eca7908eaac57f9b8387a5dbc45ec5b2 Mon Sep 17 00:00:00 2001 -From: "SkyLake.Huang" -Date: Thu, 23 Jun 2022 18:40:59 +0800 -Subject: [PATCH 6/6] drivers: mtd: spi-nor: Add calibration support for - spi-nor - -Signed-off-by: SkyLake.Huang ---- - drivers/mtd/nand/spi/core.c | 5 ++++- - drivers/mtd/spi-nor/core.c | 15 +++++++++++++++ - 2 files changed, 19 insertions(+), 1 deletion(-) - ---- a/drivers/mtd/nand/spi/core.c -+++ b/drivers/mtd/nand/spi/core.c -@@ -1019,7 +1019,10 @@ int spinand_cal_read(void *priv, u32 *ad - if (ret) - return ret; - -- ret = spinand_wait(spinand, &status); -+ ret = spinand_wait(spinand, -+ SPINAND_READ_INITIAL_DELAY_US, -+ SPINAND_READ_POLL_DELAY_US, -+ &status); - if (ret < 0) - return ret; - ---- a/drivers/mtd/spi-nor/core.c -+++ b/drivers/mtd/spi-nor/core.c -@@ -2922,6 +2922,18 @@ static const struct flash_info *spi_nor_ - return NULL; - } - -+static int spi_nor_cal_read(void *priv, u32 *addr, int addrlen, u8 *buf, int readlen) -+{ -+ struct spi_nor *nor = (struct spi_nor *)priv; -+ -+ nor->reg_proto = SNOR_PROTO_1_1_1; -+ nor->read_proto = SNOR_PROTO_1_1_1; -+ nor->read_opcode = SPINOR_OP_READ; -+ nor->read_dummy = 0; -+ -+ return nor->controller_ops->read(nor, *addr, readlen, buf); -+} -+ - static const struct flash_info *spi_nor_get_flash_info(struct spi_nor *nor, - const char *name) - { -@@ -3025,6 +3037,9 @@ int spi_nor_scan(struct spi_nor *nor, co - if (!nor->bouncebuf) - return -ENOMEM; - -+ if(nor->spimem) -+ spi_mem_do_calibration(nor->spimem, spi_nor_cal_read, nor); -+ - info = spi_nor_get_flash_info(nor, name); - if (IS_ERR(info)) - return PTR_ERR(info); diff --git a/target/linux/mediatek/patches-6.1/500-gsw-rtl8367s-mt7622-support.patch b/target/linux/mediatek/patches-6.1/500-gsw-rtl8367s-mt7622-support.patch deleted file mode 100644 index 487990ab77c..00000000000 --- a/target/linux/mediatek/patches-6.1/500-gsw-rtl8367s-mt7622-support.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -384,6 +384,12 @@ config ROCKCHIP_PHY - help - Currently supports the integrated Ethernet PHY. - -+config RTL8367S_GSW -+ tristate "rtl8367 Gigabit Switch support for mt7622" -+ depends on NET_VENDOR_MEDIATEK -+ help -+ This driver supports rtl8367s in mt7622 -+ - config SMSC_PHY - tristate "SMSC PHYs" - help ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -95,6 +95,7 @@ obj-$(CONFIG_QSEMI_PHY) += qsemi.o - obj-$(CONFIG_REALTEK_PHY) += realtek.o - obj-$(CONFIG_RENESAS_PHY) += uPD60620.o - obj-$(CONFIG_ROCKCHIP_PHY) += rockchip.o -+obj-$(CONFIG_RTL8367S_GSW) += rtk/ - obj-$(CONFIG_SMSC_PHY) += smsc.o - obj-$(CONFIG_STE10XP) += ste10Xp.o - obj-$(CONFIG_TERANETICS_PHY) += teranetics.o diff --git a/target/linux/mediatek/patches-6.1/601-PCI-mediatek-Assert-PERST-for-100ms-for-power-and-cl.patch b/target/linux/mediatek/patches-6.1/601-PCI-mediatek-Assert-PERST-for-100ms-for-power-and-cl.patch deleted file mode 100644 index 983fde707f2..00000000000 --- a/target/linux/mediatek/patches-6.1/601-PCI-mediatek-Assert-PERST-for-100ms-for-power-and-cl.patch +++ /dev/null @@ -1,34 +0,0 @@ -From: qizhong cheng -Date: Mon, 27 Dec 2021 21:31:10 +0800 -Subject: [PATCH] PCI: mediatek: Assert PERST# for 100ms for power and clock to - stabilize -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Described in PCIe CEM specification sections 2.2 (PERST# Signal) and -2.2.1 (Initial Power-Up (G3 to S0)). The deassertion of PERST# should -be delayed 100ms (TPVPERL) for the power and clock to become stable. - -Link: https://lore.kernel.org/r/20211227133110.14500-1-qizhong.cheng@mediatek.com -Signed-off-by: qizhong cheng -Signed-off-by: Lorenzo Pieralisi -Acked-by: Pali Rohár ---- - ---- a/drivers/pci/controller/pcie-mediatek.c -+++ b/drivers/pci/controller/pcie-mediatek.c -@@ -708,6 +708,13 @@ static int mtk_pcie_startup_port_v2(stru - */ - msleep(100); - -+ /* -+ * Described in PCIe CEM specification sections 2.2 (PERST# Signal) and -+ * 2.2.1 (Initial Power-Up (G3 to S0)). The deassertion of PERST# should -+ * be delayed 100ms (TPVPERL) for the power and clock to become stable. -+ */ -+ msleep(100); -+ - /* De-assert PHY, PE, PIPE, MAC and configuration reset */ - val = readl(port->base + PCIE_RST_CTRL); - val |= PCIE_PHY_RSTB | PCIE_PERSTB | PCIE_PIPE_SRSTB | diff --git a/target/linux/mediatek/patches-6.1/602-arm64-dts-mediatek-add-mt7622-pcie-slot-node.patch b/target/linux/mediatek/patches-6.1/602-arm64-dts-mediatek-add-mt7622-pcie-slot-node.patch deleted file mode 100644 index bf479ab53b2..00000000000 --- a/target/linux/mediatek/patches-6.1/602-arm64-dts-mediatek-add-mt7622-pcie-slot-node.patch +++ /dev/null @@ -1,28 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi -@@ -849,6 +849,12 @@ - #address-cells = <0>; - #interrupt-cells = <1>; - }; -+ -+ slot0: pcie@0,0 { -+ reg = <0x0000 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ }; - }; - - pcie1: pcie@1a145000 { -@@ -887,6 +893,12 @@ - #address-cells = <0>; - #interrupt-cells = <1>; - }; -+ -+ slot1: pcie@1,0 { -+ reg = <0x0800 0 0 0 0>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ }; - }; - - sata: sata@1a200000 { diff --git a/target/linux/mediatek/patches-6.1/610-pcie-mediatek-fix-clearing-interrupt-status.patch b/target/linux/mediatek/patches-6.1/610-pcie-mediatek-fix-clearing-interrupt-status.patch deleted file mode 100644 index 2a49b2275c4..00000000000 --- a/target/linux/mediatek/patches-6.1/610-pcie-mediatek-fix-clearing-interrupt-status.patch +++ /dev/null @@ -1,23 +0,0 @@ -From: Felix Fietkau -Date: Fri, 4 Sep 2020 18:33:27 +0200 -Subject: [PATCH] pcie-mediatek: fix clearing interrupt status - -Clearing the status needs to happen after running the handler, otherwise -we will get an extra spurious interrupt after the cause has been cleared - -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/pci/controller/pcie-mediatek.c -+++ b/drivers/pci/controller/pcie-mediatek.c -@@ -607,9 +607,9 @@ static void mtk_pcie_intr_handler(struct - if (status & INTX_MASK) { - for_each_set_bit_from(bit, &status, PCI_NUM_INTX + INTX_SHIFT) { - /* Clear the INTx */ -- writel(1 << bit, port->base + PCIE_INT_STATUS); - generic_handle_domain_irq(port->irq_domain, - bit - INTX_SHIFT); -+ writel(1 << bit, port->base + PCIE_INT_STATUS); - } - } - diff --git a/target/linux/mediatek/patches-6.1/611-pcie-mediatek-gen3-PERST-for-100ms.patch b/target/linux/mediatek/patches-6.1/611-pcie-mediatek-gen3-PERST-for-100ms.patch deleted file mode 100644 index 32b4237d822..00000000000 --- a/target/linux/mediatek/patches-6.1/611-pcie-mediatek-gen3-PERST-for-100ms.patch +++ /dev/null @@ -1,17 +0,0 @@ ---- a/drivers/pci/controller/pcie-mediatek-gen3.c -+++ b/drivers/pci/controller/pcie-mediatek-gen3.c -@@ -375,7 +375,13 @@ static int mtk_pcie_startup_port(struct - msleep(100); - - /* De-assert reset signals */ -- val &= ~(PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB | PCIE_PE_RSTB); -+ val &= ~(PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB); -+ writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG); -+ -+ msleep(100); -+ -+ /* De-assert PERST# signals */ -+ val &= ~(PCIE_PE_RSTB); - writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG); - - /* Check if the link is up or not */ diff --git a/target/linux/mediatek/patches-6.1/615-phy-phy-mtk-xsphy-support-type-switch-by-pericfg.patch b/target/linux/mediatek/patches-6.1/615-phy-phy-mtk-xsphy-support-type-switch-by-pericfg.patch deleted file mode 100644 index a597f70caa5..00000000000 --- a/target/linux/mediatek/patches-6.1/615-phy-phy-mtk-xsphy-support-type-switch-by-pericfg.patch +++ /dev/null @@ -1,167 +0,0 @@ -From 50cefacc6c001eea1d9b1c78ba27304566f304f1 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Fri, 2 Jun 2023 13:06:26 +0800 -Subject: [PATCH] phy: mediatek: xsphy: support type switch by pericfg - -Patch from Sam Shih found in MediaTek SDK -released under GPL. - -Get syscon and use it to set the PHY type. -Extend support to PCIe and SGMII mode in addition to USB2 and USB3. - -Signed-off-by: Daniel Golle ---- - drivers/phy/mediatek/phy-mtk-xsphy.c | 81 +++++++++++++++++++++++++++- - 1 file changed, 80 insertions(+), 1 deletion(-) - ---- a/drivers/phy/mediatek/phy-mtk-xsphy.c -+++ b/drivers/phy/mediatek/phy-mtk-xsphy.c -@@ -11,10 +11,12 @@ - #include - #include - #include -+#include - #include - #include - #include - #include -+#include - - #include "phy-mtk-io.h" - -@@ -81,12 +83,22 @@ - #define XSP_SR_COEF_DIVISOR 1000 - #define XSP_FM_DET_CYCLE_CNT 1024 - -+/* PHY switch between pcie/usb3/sgmii */ -+#define USB_PHY_SWITCH_CTRL 0x0 -+#define RG_PHY_SW_TYPE GENMASK(3, 0) -+#define RG_PHY_SW_PCIE 0x0 -+#define RG_PHY_SW_USB3 0x1 -+#define RG_PHY_SW_SGMII 0x2 -+ - struct xsphy_instance { - struct phy *phy; - void __iomem *port_base; - struct clk *ref_clk; /* reference clock of anolog phy */ - u32 index; - u32 type; -+ struct regmap *type_sw; -+ u32 type_sw_reg; -+ u32 type_sw_index; - /* only for HQA test */ - int efuse_intr; - int efuse_tx_imp; -@@ -259,6 +271,10 @@ static void phy_parse_property(struct mt - inst->efuse_intr, inst->efuse_tx_imp, - inst->efuse_rx_imp); - break; -+ case PHY_TYPE_PCIE: -+ case PHY_TYPE_SGMII: -+ /* nothing to do */ -+ break; - default: - dev_err(xsphy->dev, "incompatible phy type\n"); - return; -@@ -305,6 +321,62 @@ static void u3_phy_props_set(struct mtk_ - RG_XTP_LN0_RX_IMPSEL, inst->efuse_rx_imp); - } - -+/* type switch for usb3/pcie/sgmii */ -+static int phy_type_syscon_get(struct xsphy_instance *instance, -+ struct device_node *dn) -+{ -+ struct of_phandle_args args; -+ int ret; -+ -+ /* type switch function is optional */ -+ if (!of_property_read_bool(dn, "mediatek,syscon-type")) -+ return 0; -+ -+ ret = of_parse_phandle_with_fixed_args(dn, "mediatek,syscon-type", -+ 2, 0, &args); -+ if (ret) -+ return ret; -+ -+ instance->type_sw_reg = args.args[0]; -+ instance->type_sw_index = args.args[1] & 0x3; /* <=3 */ -+ instance->type_sw = syscon_node_to_regmap(args.np); -+ of_node_put(args.np); -+ dev_info(&instance->phy->dev, "type_sw - reg %#x, index %d\n", -+ instance->type_sw_reg, instance->type_sw_index); -+ -+ return PTR_ERR_OR_ZERO(instance->type_sw); -+} -+ -+static int phy_type_set(struct xsphy_instance *instance) -+{ -+ int type; -+ u32 offset; -+ -+ if (!instance->type_sw) -+ return 0; -+ -+ switch (instance->type) { -+ case PHY_TYPE_USB3: -+ type = RG_PHY_SW_USB3; -+ break; -+ case PHY_TYPE_PCIE: -+ type = RG_PHY_SW_PCIE; -+ break; -+ case PHY_TYPE_SGMII: -+ type = RG_PHY_SW_SGMII; -+ break; -+ case PHY_TYPE_USB2: -+ default: -+ return 0; -+ } -+ -+ offset = instance->type_sw_index * BITS_PER_BYTE; -+ regmap_update_bits(instance->type_sw, instance->type_sw_reg, -+ RG_PHY_SW_TYPE << offset, type << offset); -+ -+ return 0; -+} -+ - static int mtk_phy_init(struct phy *phy) - { - struct xsphy_instance *inst = phy_get_drvdata(phy); -@@ -325,6 +397,10 @@ static int mtk_phy_init(struct phy *phy) - case PHY_TYPE_USB3: - u3_phy_props_set(xsphy, inst); - break; -+ case PHY_TYPE_PCIE: -+ case PHY_TYPE_SGMII: -+ /* nothing to do, only used to set type */ -+ break; - default: - dev_err(xsphy->dev, "incompatible phy type\n"); - clk_disable_unprepare(inst->ref_clk); -@@ -403,12 +479,15 @@ static struct phy *mtk_phy_xlate(struct - - inst->type = args->args[0]; - if (!(inst->type == PHY_TYPE_USB2 || -- inst->type == PHY_TYPE_USB3)) { -+ inst->type == PHY_TYPE_USB3 || -+ inst->type == PHY_TYPE_PCIE || -+ inst->type == PHY_TYPE_SGMII)) { - dev_err(dev, "unsupported phy type: %d\n", inst->type); - return ERR_PTR(-EINVAL); - } - - phy_parse_property(xsphy, inst); -+ phy_type_set(inst); - - return inst->phy; - } -@@ -515,6 +594,10 @@ static int mtk_xsphy_probe(struct platfo - retval = PTR_ERR(inst->ref_clk); - goto put_child; - } -+ -+ retval = phy_type_syscon_get(inst, child_np); -+ if (retval) -+ goto put_child; - } - - provider = devm_of_phy_provider_register(dev, mtk_phy_xlate); diff --git a/target/linux/mediatek/patches-6.1/710-pci-pcie-mediatek-add-support-for-coherent-DMA.patch b/target/linux/mediatek/patches-6.1/710-pci-pcie-mediatek-add-support-for-coherent-DMA.patch deleted file mode 100644 index 76ee2fc89ab..00000000000 --- a/target/linux/mediatek/patches-6.1/710-pci-pcie-mediatek-add-support-for-coherent-DMA.patch +++ /dev/null @@ -1,82 +0,0 @@ -From: Felix Fietkau -Date: Fri, 4 Sep 2020 18:42:42 +0200 -Subject: [PATCH] pci: pcie-mediatek: add support for coherent DMA - -It improves performance by eliminating the need for a cache flush for DMA on -attached devices - -Signed-off-by: Felix Fietkau ---- - ---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi -@@ -837,6 +837,9 @@ - bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>; - status = "disabled"; -+ dma-coherent; -+ mediatek,hifsys = <&hifsys>; -+ mediatek,cci-control = <&cci_control2>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; -@@ -881,6 +884,9 @@ - bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>; - status = "disabled"; -+ dma-coherent; -+ mediatek,hifsys = <&hifsys>; -+ mediatek,cci-control = <&cci_control2>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; ---- a/drivers/pci/controller/pcie-mediatek.c -+++ b/drivers/pci/controller/pcie-mediatek.c -@@ -20,6 +20,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -139,6 +140,11 @@ - #define PCIE_LINK_STATUS_V2 0x804 - #define PCIE_PORT_LINKUP_V2 BIT(10) - -+/* DMA channel mapping */ -+#define HIFSYS_DMA_AG_MAP 0x008 -+#define HIFSYS_DMA_AG_MAP_PCIE0 BIT(0) -+#define HIFSYS_DMA_AG_MAP_PCIE1 BIT(1) -+ - struct mtk_pcie_port; - - /** -@@ -1060,6 +1066,27 @@ static int mtk_pcie_setup(struct mtk_pci - struct mtk_pcie_port *port, *tmp; - int err, slot; - -+ if (of_dma_is_coherent(node)) { -+ struct regmap *con; -+ u32 mask; -+ -+ con = syscon_regmap_lookup_by_phandle(node, -+ "mediatek,cci-control"); -+ /* enable CPU/bus coherency */ -+ if (!IS_ERR(con)) -+ regmap_write(con, 0, 3); -+ -+ con = syscon_regmap_lookup_by_phandle(node, -+ "mediatek,hifsys"); -+ if (IS_ERR(con)) { -+ dev_err(dev, "missing hifsys node\n"); -+ return PTR_ERR(con); -+ } -+ -+ mask = HIFSYS_DMA_AG_MAP_PCIE0 | HIFSYS_DMA_AG_MAP_PCIE1; -+ regmap_update_bits(con, HIFSYS_DMA_AG_MAP, mask, mask); -+ } -+ - slot = of_get_pci_domain_nr(dev->of_node); - if (slot < 0) { - for_each_available_child_of_node(node, child) { diff --git a/target/linux/mediatek/patches-6.1/721-dts-mt7622-mediatek-fix-300mhz.patch b/target/linux/mediatek/patches-6.1/721-dts-mt7622-mediatek-fix-300mhz.patch deleted file mode 100644 index f9a5fdbd0d8..00000000000 --- a/target/linux/mediatek/patches-6.1/721-dts-mt7622-mediatek-fix-300mhz.patch +++ /dev/null @@ -1,27 +0,0 @@ -From: Jip de Beer -Date: Sun, 9 Jan 2022 13:14:04 +0100 -Subject: [PATCH] mediatek mt7622: fix 300mhz typo in dts - -The lowest frequency should be 300MHz, since that is the label -assigned to the OPP in the mt7622.dtsi device tree, while there is one -missing zero in the actual value. - -To be clear, the lowest frequency should be 300MHz instead of 30MHz. - -As mentioned @dangowrt on the OpenWrt forum there is no benefit in -leaving 30MHz as the lowest frequency. - -Signed-off-by: Jip de Beer -Signed-off-by: Fritz D. Ansel ---- ---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi -@@ -24,7 +24,7 @@ - compatible = "operating-points-v2"; - opp-shared; - opp-300000000 { -- opp-hz = /bits/ 64 <30000000>; -+ opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <950000>; - }; - diff --git a/target/linux/mediatek/patches-6.1/722-remove-300Hz-to-prevent-freeze.patch b/target/linux/mediatek/patches-6.1/722-remove-300Hz-to-prevent-freeze.patch deleted file mode 100644 index 52069496ca8..00000000000 --- a/target/linux/mediatek/patches-6.1/722-remove-300Hz-to-prevent-freeze.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi -@@ -23,11 +23,17 @@ - cpu_opp_table: opp-table { - compatible = "operating-points-v2"; - opp-shared; -- opp-300000000 { -- opp-hz = /bits/ 64 <300000000>; -- opp-microvolt = <950000>; -- }; -- -+ /* Due to the bug described at the link below, remove the 300 MHz clock to avoid a low -+ * voltage condition that can cause a hang when rebooting the RT3200/E8450. -+ * -+ * https://forum.openwrt.org/t/belkin-rt3200-linksys-e8450-wifi-ax-discussion/94302/1490 -+ * -+ * opp-300000000 { -+ * opp-hz = /bits/ 64 <300000000>; -+ * opp-microvolt = <950000>; -+ * }; -+ * -+ */ - opp-437500000 { - opp-hz = /bits/ 64 <437500000>; - opp-microvolt = <1000000>; diff --git a/target/linux/mediatek/patches-6.1/730-v6.5-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch b/target/linux/mediatek/patches-6.1/730-v6.5-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch deleted file mode 100644 index 4022b2a8424..00000000000 --- a/target/linux/mediatek/patches-6.1/730-v6.5-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch +++ /dev/null @@ -1,1204 +0,0 @@ -From 98c485eaf509bc0e2a85f9b58d17cd501f274c4e Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Sun, 11 Jun 2023 00:48:10 +0100 -Subject: [PATCH] net: phy: add driver for MediaTek SoC built-in GE PHYs - -Some of MediaTek's Filogic SoCs come with built-in gigabit Ethernet -PHYs which require calibration data from the SoC's efuse. -Despite the similar design the driver doesn't share any code with the -existing mediatek-ge.c. -Add support for such PHYs by introducing a new driver with basic -support for MediaTek SoCs MT7981 and MT7988 built-in 1GE PHYs. - -Signed-off-by: Daniel Golle -Reviewed-by: Andrew Lunn -Signed-off-by: David S. Miller ---- - MAINTAINERS | 9 + - drivers/net/phy/Kconfig | 12 + - drivers/net/phy/Makefile | 1 + - drivers/net/phy/mediatek-ge-soc.c | 1116 +++++++++++++++++++++++++++++ - drivers/net/phy/mediatek-ge.c | 3 +- - 5 files changed, 1140 insertions(+), 1 deletion(-) - create mode 100644 drivers/net/phy/mediatek-ge-soc.c - ---- a/MAINTAINERS -+++ b/MAINTAINERS -@@ -12945,6 +12945,15 @@ F: drivers/net/pcs/pcs-mtk-usxgmii.c - F: include/linux/pcs/pcs-mtk-lynxi.h - F: include/linux/pcs/pcs-mtk-usxgmii.h - -+MEDIATEK ETHERNET PHY DRIVERS -+M: Daniel Golle -+M: Qingfang Deng -+M: SkyLake Huang -+L: netdev@vger.kernel.org -+S: Maintained -+F: drivers/net/phy/mediatek-ge-soc.c -+F: drivers/net/phy/mediatek-ge.c -+ - MEDIATEK I2C CONTROLLER DRIVER - M: Qii Wang - L: linux-i2c@vger.kernel.org ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -314,6 +314,18 @@ config MEDIATEK_GE_PHY - help - Supports the MediaTek Gigabit Ethernet PHYs. - -+config MEDIATEK_GE_SOC_PHY -+ tristate "MediaTek SoC Ethernet PHYs" -+ depends on (ARM64 && ARCH_MEDIATEK) || COMPILE_TEST -+ select NVMEM_MTK_EFUSE -+ help -+ Supports MediaTek SoC built-in Gigabit Ethernet PHYs. -+ -+ Include support for built-in Ethernet PHYs which are present in -+ the MT7981 and MT7988 SoCs. These PHYs need calibration data -+ present in the SoCs efuse and will dynamically calibrate VCM -+ (common-mode voltage) during startup. -+ - config MICREL_PHY - tristate "Micrel PHYs" - depends on PTP_1588_CLOCK_OPTIONAL ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -80,6 +80,7 @@ obj-$(CONFIG_MARVELL_PHY) += marvell.o - obj-$(CONFIG_MARVELL_88X2222_PHY) += marvell-88x2222.o - obj-$(CONFIG_MAXLINEAR_GPHY) += mxl-gpy.o - obj-$(CONFIG_MEDIATEK_GE_PHY) += mediatek-ge.o -+obj-$(CONFIG_MEDIATEK_GE_SOC_PHY) += mediatek-ge-soc.o - obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o - obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o - obj-$(CONFIG_MICREL_PHY) += micrel.o ---- /dev/null -+++ b/drivers/net/phy/mediatek-ge-soc.c -@@ -0,0 +1,1116 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define MTK_GPHY_ID_MT7981 0x03a29461 -+#define MTK_GPHY_ID_MT7988 0x03a29481 -+ -+#define MTK_EXT_PAGE_ACCESS 0x1f -+#define MTK_PHY_PAGE_STANDARD 0x0000 -+#define MTK_PHY_PAGE_EXTENDED_3 0x0003 -+ -+#define MTK_PHY_LPI_REG_14 0x14 -+#define MTK_PHY_LPI_WAKE_TIMER_1000_MASK GENMASK(8, 0) -+ -+#define MTK_PHY_LPI_REG_1c 0x1c -+#define MTK_PHY_SMI_DET_ON_THRESH_MASK GENMASK(13, 8) -+ -+#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30 -+#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5 -+ -+#define ANALOG_INTERNAL_OPERATION_MAX_US 20 -+#define TXRESERVE_MIN 0 -+#define TXRESERVE_MAX 7 -+ -+#define MTK_PHY_ANARG_RG 0x10 -+#define MTK_PHY_TCLKOFFSET_MASK GENMASK(12, 8) -+ -+/* Registers on MDIO_MMD_VEND1 */ -+#define MTK_PHY_TXVLD_DA_RG 0x12 -+#define MTK_PHY_DA_TX_I2MPB_A_GBE_MASK GENMASK(15, 10) -+#define MTK_PHY_DA_TX_I2MPB_A_TBT_MASK GENMASK(5, 0) -+ -+#define MTK_PHY_TX_I2MPB_TEST_MODE_A2 0x16 -+#define MTK_PHY_DA_TX_I2MPB_A_HBT_MASK GENMASK(15, 10) -+#define MTK_PHY_DA_TX_I2MPB_A_TST_MASK GENMASK(5, 0) -+ -+#define MTK_PHY_TX_I2MPB_TEST_MODE_B1 0x17 -+#define MTK_PHY_DA_TX_I2MPB_B_GBE_MASK GENMASK(13, 8) -+#define MTK_PHY_DA_TX_I2MPB_B_TBT_MASK GENMASK(5, 0) -+ -+#define MTK_PHY_TX_I2MPB_TEST_MODE_B2 0x18 -+#define MTK_PHY_DA_TX_I2MPB_B_HBT_MASK GENMASK(13, 8) -+#define MTK_PHY_DA_TX_I2MPB_B_TST_MASK GENMASK(5, 0) -+ -+#define MTK_PHY_TX_I2MPB_TEST_MODE_C1 0x19 -+#define MTK_PHY_DA_TX_I2MPB_C_GBE_MASK GENMASK(13, 8) -+#define MTK_PHY_DA_TX_I2MPB_C_TBT_MASK GENMASK(5, 0) -+ -+#define MTK_PHY_TX_I2MPB_TEST_MODE_C2 0x20 -+#define MTK_PHY_DA_TX_I2MPB_C_HBT_MASK GENMASK(13, 8) -+#define MTK_PHY_DA_TX_I2MPB_C_TST_MASK GENMASK(5, 0) -+ -+#define MTK_PHY_TX_I2MPB_TEST_MODE_D1 0x21 -+#define MTK_PHY_DA_TX_I2MPB_D_GBE_MASK GENMASK(13, 8) -+#define MTK_PHY_DA_TX_I2MPB_D_TBT_MASK GENMASK(5, 0) -+ -+#define MTK_PHY_TX_I2MPB_TEST_MODE_D2 0x22 -+#define MTK_PHY_DA_TX_I2MPB_D_HBT_MASK GENMASK(13, 8) -+#define MTK_PHY_DA_TX_I2MPB_D_TST_MASK GENMASK(5, 0) -+ -+#define MTK_PHY_RXADC_CTRL_RG7 0xc6 -+#define MTK_PHY_DA_AD_BUF_BIAS_LP_MASK GENMASK(9, 8) -+ -+#define MTK_PHY_RXADC_CTRL_RG9 0xc8 -+#define MTK_PHY_DA_RX_PSBN_TBT_MASK GENMASK(14, 12) -+#define MTK_PHY_DA_RX_PSBN_HBT_MASK GENMASK(10, 8) -+#define MTK_PHY_DA_RX_PSBN_GBE_MASK GENMASK(6, 4) -+#define MTK_PHY_DA_RX_PSBN_LP_MASK GENMASK(2, 0) -+ -+#define MTK_PHY_LDO_OUTPUT_V 0xd7 -+ -+#define MTK_PHY_RG_ANA_CAL_RG0 0xdb -+#define MTK_PHY_RG_CAL_CKINV BIT(12) -+#define MTK_PHY_RG_ANA_CALEN BIT(8) -+#define MTK_PHY_RG_ZCALEN_A BIT(0) -+ -+#define MTK_PHY_RG_ANA_CAL_RG1 0xdc -+#define MTK_PHY_RG_ZCALEN_B BIT(12) -+#define MTK_PHY_RG_ZCALEN_C BIT(8) -+#define MTK_PHY_RG_ZCALEN_D BIT(4) -+#define MTK_PHY_RG_TXVOS_CALEN BIT(0) -+ -+#define MTK_PHY_RG_ANA_CAL_RG5 0xe0 -+#define MTK_PHY_RG_REXT_TRIM_MASK GENMASK(13, 8) -+ -+#define MTK_PHY_RG_TX_FILTER 0xfe -+ -+#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG120 0x120 -+#define MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK GENMASK(12, 8) -+#define MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK GENMASK(4, 0) -+ -+#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122 0x122 -+#define MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK GENMASK(7, 0) -+ -+#define MTK_PHY_RG_TESTMUX_ADC_CTRL 0x144 -+#define MTK_PHY_RG_TXEN_DIG_MASK GENMASK(5, 5) -+ -+#define MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B 0x172 -+#define MTK_PHY_CR_TX_AMP_OFFSET_A_MASK GENMASK(13, 8) -+#define MTK_PHY_CR_TX_AMP_OFFSET_B_MASK GENMASK(6, 0) -+ -+#define MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D 0x173 -+#define MTK_PHY_CR_TX_AMP_OFFSET_C_MASK GENMASK(13, 8) -+#define MTK_PHY_CR_TX_AMP_OFFSET_D_MASK GENMASK(6, 0) -+ -+#define MTK_PHY_RG_AD_CAL_COMP 0x17a -+#define MTK_PHY_AD_CAL_COMP_OUT_SHIFT (8) -+ -+#define MTK_PHY_RG_AD_CAL_CLK 0x17b -+#define MTK_PHY_DA_CAL_CLK BIT(0) -+ -+#define MTK_PHY_RG_AD_CALIN 0x17c -+#define MTK_PHY_DA_CALIN_FLAG BIT(0) -+ -+#define MTK_PHY_RG_DASN_DAC_IN0_A 0x17d -+#define MTK_PHY_DASN_DAC_IN0_A_MASK GENMASK(9, 0) -+ -+#define MTK_PHY_RG_DASN_DAC_IN0_B 0x17e -+#define MTK_PHY_DASN_DAC_IN0_B_MASK GENMASK(9, 0) -+ -+#define MTK_PHY_RG_DASN_DAC_IN0_C 0x17f -+#define MTK_PHY_DASN_DAC_IN0_C_MASK GENMASK(9, 0) -+ -+#define MTK_PHY_RG_DASN_DAC_IN0_D 0x180 -+#define MTK_PHY_DASN_DAC_IN0_D_MASK GENMASK(9, 0) -+ -+#define MTK_PHY_RG_DASN_DAC_IN1_A 0x181 -+#define MTK_PHY_DASN_DAC_IN1_A_MASK GENMASK(9, 0) -+ -+#define MTK_PHY_RG_DASN_DAC_IN1_B 0x182 -+#define MTK_PHY_DASN_DAC_IN1_B_MASK GENMASK(9, 0) -+ -+#define MTK_PHY_RG_DASN_DAC_IN1_C 0x183 -+#define MTK_PHY_DASN_DAC_IN1_C_MASK GENMASK(9, 0) -+ -+#define MTK_PHY_RG_DASN_DAC_IN1_D 0x184 -+#define MTK_PHY_DASN_DAC_IN1_D_MASK GENMASK(9, 0) -+ -+#define MTK_PHY_RG_DEV1E_REG19b 0x19b -+#define MTK_PHY_BYPASS_DSP_LPI_READY BIT(8) -+ -+#define MTK_PHY_RG_LP_IIR2_K1_L 0x22a -+#define MTK_PHY_RG_LP_IIR2_K1_U 0x22b -+#define MTK_PHY_RG_LP_IIR2_K2_L 0x22c -+#define MTK_PHY_RG_LP_IIR2_K2_U 0x22d -+#define MTK_PHY_RG_LP_IIR2_K3_L 0x22e -+#define MTK_PHY_RG_LP_IIR2_K3_U 0x22f -+#define MTK_PHY_RG_LP_IIR2_K4_L 0x230 -+#define MTK_PHY_RG_LP_IIR2_K4_U 0x231 -+#define MTK_PHY_RG_LP_IIR2_K5_L 0x232 -+#define MTK_PHY_RG_LP_IIR2_K5_U 0x233 -+ -+#define MTK_PHY_RG_DEV1E_REG234 0x234 -+#define MTK_PHY_TR_OPEN_LOOP_EN_MASK GENMASK(0, 0) -+#define MTK_PHY_LPF_X_AVERAGE_MASK GENMASK(7, 4) -+#define MTK_PHY_TR_LP_IIR_EEE_EN BIT(12) -+ -+#define MTK_PHY_RG_LPF_CNT_VAL 0x235 -+ -+#define MTK_PHY_RG_DEV1E_REG238 0x238 -+#define MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK GENMASK(8, 0) -+#define MTK_PHY_LPI_SLV_SEND_TX_EN BIT(12) -+ -+#define MTK_PHY_RG_DEV1E_REG239 0x239 -+#define MTK_PHY_LPI_SEND_LOC_TIMER_MASK GENMASK(8, 0) -+#define MTK_PHY_LPI_TXPCS_LOC_RCV BIT(12) -+ -+#define MTK_PHY_RG_DEV1E_REG27C 0x27c -+#define MTK_PHY_VGASTATE_FFE_THR_ST1_MASK GENMASK(12, 8) -+#define MTK_PHY_RG_DEV1E_REG27D 0x27d -+#define MTK_PHY_VGASTATE_FFE_THR_ST2_MASK GENMASK(4, 0) -+ -+#define MTK_PHY_RG_DEV1E_REG2C7 0x2c7 -+#define MTK_PHY_MAX_GAIN_MASK GENMASK(4, 0) -+#define MTK_PHY_MIN_GAIN_MASK GENMASK(12, 8) -+ -+#define MTK_PHY_RG_DEV1E_REG2D1 0x2d1 -+#define MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK GENMASK(7, 0) -+#define MTK_PHY_LPI_SKIP_SD_SLV_TR BIT(8) -+#define MTK_PHY_LPI_TR_READY BIT(9) -+#define MTK_PHY_LPI_VCO_EEE_STG0_EN BIT(10) -+ -+#define MTK_PHY_RG_DEV1E_REG323 0x323 -+#define MTK_PHY_EEE_WAKE_MAS_INT_DC BIT(0) -+#define MTK_PHY_EEE_WAKE_SLV_INT_DC BIT(4) -+ -+#define MTK_PHY_RG_DEV1E_REG324 0x324 -+#define MTK_PHY_SMI_DETCNT_MAX_MASK GENMASK(5, 0) -+#define MTK_PHY_SMI_DET_MAX_EN BIT(8) -+ -+#define MTK_PHY_RG_DEV1E_REG326 0x326 -+#define MTK_PHY_LPI_MODE_SD_ON BIT(0) -+#define MTK_PHY_RESET_RANDUPD_CNT BIT(1) -+#define MTK_PHY_TREC_UPDATE_ENAB_CLR BIT(2) -+#define MTK_PHY_LPI_QUIT_WAIT_DFE_SIG_DET_OFF BIT(4) -+#define MTK_PHY_TR_READY_SKIP_AFE_WAKEUP BIT(5) -+ -+#define MTK_PHY_LDO_PUMP_EN_PAIRAB 0x502 -+#define MTK_PHY_LDO_PUMP_EN_PAIRCD 0x503 -+ -+#define MTK_PHY_DA_TX_R50_PAIR_A 0x53d -+#define MTK_PHY_DA_TX_R50_PAIR_B 0x53e -+#define MTK_PHY_DA_TX_R50_PAIR_C 0x53f -+#define MTK_PHY_DA_TX_R50_PAIR_D 0x540 -+ -+#define MTK_PHY_RG_BG_RASEL 0x115 -+#define MTK_PHY_RG_BG_RASEL_MASK GENMASK(2, 0) -+ -+/* These macro privides efuse parsing for internal phy. */ -+#define EFS_DA_TX_I2MPB_A(x) (((x) >> 0) & GENMASK(5, 0)) -+#define EFS_DA_TX_I2MPB_B(x) (((x) >> 6) & GENMASK(5, 0)) -+#define EFS_DA_TX_I2MPB_C(x) (((x) >> 12) & GENMASK(5, 0)) -+#define EFS_DA_TX_I2MPB_D(x) (((x) >> 18) & GENMASK(5, 0)) -+#define EFS_DA_TX_AMP_OFFSET_A(x) (((x) >> 24) & GENMASK(5, 0)) -+ -+#define EFS_DA_TX_AMP_OFFSET_B(x) (((x) >> 0) & GENMASK(5, 0)) -+#define EFS_DA_TX_AMP_OFFSET_C(x) (((x) >> 6) & GENMASK(5, 0)) -+#define EFS_DA_TX_AMP_OFFSET_D(x) (((x) >> 12) & GENMASK(5, 0)) -+#define EFS_DA_TX_R50_A(x) (((x) >> 18) & GENMASK(5, 0)) -+#define EFS_DA_TX_R50_B(x) (((x) >> 24) & GENMASK(5, 0)) -+ -+#define EFS_DA_TX_R50_C(x) (((x) >> 0) & GENMASK(5, 0)) -+#define EFS_DA_TX_R50_D(x) (((x) >> 6) & GENMASK(5, 0)) -+ -+#define EFS_RG_BG_RASEL(x) (((x) >> 4) & GENMASK(2, 0)) -+#define EFS_RG_REXT_TRIM(x) (((x) >> 7) & GENMASK(5, 0)) -+ -+enum { -+ NO_PAIR, -+ PAIR_A, -+ PAIR_B, -+ PAIR_C, -+ PAIR_D, -+}; -+ -+enum { -+ GPHY_PORT0, -+ GPHY_PORT1, -+ GPHY_PORT2, -+ GPHY_PORT3, -+}; -+ -+enum calibration_mode { -+ EFUSE_K, -+ SW_K -+}; -+ -+enum CAL_ITEM { -+ REXT, -+ TX_OFFSET, -+ TX_AMP, -+ TX_R50, -+ TX_VCM -+}; -+ -+enum CAL_MODE { -+ EFUSE_M, -+ SW_M -+}; -+ -+static int mtk_socphy_read_page(struct phy_device *phydev) -+{ -+ return __phy_read(phydev, MTK_EXT_PAGE_ACCESS); -+} -+ -+static int mtk_socphy_write_page(struct phy_device *phydev, int page) -+{ -+ return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page); -+} -+ -+/* One calibration cycle consists of: -+ * 1.Set DA_CALIN_FLAG high to start calibration. Keep it high -+ * until AD_CAL_COMP is ready to output calibration result. -+ * 2.Wait until DA_CAL_CLK is available. -+ * 3.Fetch AD_CAL_COMP_OUT. -+ */ -+static int cal_cycle(struct phy_device *phydev, int devad, -+ u32 regnum, u16 mask, u16 cal_val) -+{ -+ int reg_val; -+ int ret; -+ -+ phy_modify_mmd(phydev, devad, regnum, -+ mask, cal_val); -+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN, -+ MTK_PHY_DA_CALIN_FLAG); -+ -+ ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1, -+ MTK_PHY_RG_AD_CAL_CLK, reg_val, -+ reg_val & MTK_PHY_DA_CAL_CLK, 500, -+ ANALOG_INTERNAL_OPERATION_MAX_US, false); -+ if (ret) { -+ phydev_err(phydev, "Calibration cycle timeout\n"); -+ return ret; -+ } -+ -+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN, -+ MTK_PHY_DA_CALIN_FLAG); -+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CAL_COMP) >> -+ MTK_PHY_AD_CAL_COMP_OUT_SHIFT; -+ phydev_dbg(phydev, "cal_val: 0x%x, ret: %d\n", cal_val, ret); -+ -+ return ret; -+} -+ -+static int rext_fill_result(struct phy_device *phydev, u16 *buf) -+{ -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG5, -+ MTK_PHY_RG_REXT_TRIM_MASK, buf[0] << 8); -+ phy_modify_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_RG_BG_RASEL, -+ MTK_PHY_RG_BG_RASEL_MASK, buf[1]); -+ -+ return 0; -+} -+ -+static int rext_cal_efuse(struct phy_device *phydev, u32 *buf) -+{ -+ u16 rext_cal_val[2]; -+ -+ rext_cal_val[0] = EFS_RG_REXT_TRIM(buf[3]); -+ rext_cal_val[1] = EFS_RG_BG_RASEL(buf[3]); -+ rext_fill_result(phydev, rext_cal_val); -+ -+ return 0; -+} -+ -+static int tx_offset_fill_result(struct phy_device *phydev, u16 *buf) -+{ -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B, -+ MTK_PHY_CR_TX_AMP_OFFSET_A_MASK, buf[0] << 8); -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B, -+ MTK_PHY_CR_TX_AMP_OFFSET_B_MASK, buf[1]); -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D, -+ MTK_PHY_CR_TX_AMP_OFFSET_C_MASK, buf[2] << 8); -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D, -+ MTK_PHY_CR_TX_AMP_OFFSET_D_MASK, buf[3]); -+ -+ return 0; -+} -+ -+static int tx_offset_cal_efuse(struct phy_device *phydev, u32 *buf) -+{ -+ u16 tx_offset_cal_val[4]; -+ -+ tx_offset_cal_val[0] = EFS_DA_TX_AMP_OFFSET_A(buf[0]); -+ tx_offset_cal_val[1] = EFS_DA_TX_AMP_OFFSET_B(buf[1]); -+ tx_offset_cal_val[2] = EFS_DA_TX_AMP_OFFSET_C(buf[1]); -+ tx_offset_cal_val[3] = EFS_DA_TX_AMP_OFFSET_D(buf[1]); -+ -+ tx_offset_fill_result(phydev, tx_offset_cal_val); -+ -+ return 0; -+} -+ -+static int tx_amp_fill_result(struct phy_device *phydev, u16 *buf) -+{ -+ int i; -+ int bias[16] = {}; -+ const int vals_9461[16] = { 7, 1, 4, 7, -+ 7, 1, 4, 7, -+ 7, 1, 4, 7, -+ 7, 1, 4, 7 }; -+ const int vals_9481[16] = { 10, 6, 6, 10, -+ 10, 6, 6, 10, -+ 10, 6, 6, 10, -+ 10, 6, 6, 10 }; -+ switch (phydev->drv->phy_id) { -+ case MTK_GPHY_ID_MT7981: -+ /* We add some calibration to efuse values -+ * due to board level influence. -+ * GBE: +7, TBT: +1, HBT: +4, TST: +7 -+ */ -+ memcpy(bias, (const void *)vals_9461, sizeof(bias)); -+ break; -+ case MTK_GPHY_ID_MT7988: -+ memcpy(bias, (const void *)vals_9481, sizeof(bias)); -+ break; -+ } -+ -+ /* Prevent overflow */ -+ for (i = 0; i < 12; i++) { -+ if (buf[i >> 2] + bias[i] > 63) { -+ buf[i >> 2] = 63; -+ bias[i] = 0; -+ } -+ } -+ -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG, -+ MTK_PHY_DA_TX_I2MPB_A_GBE_MASK, (buf[0] + bias[0]) << 10); -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG, -+ MTK_PHY_DA_TX_I2MPB_A_TBT_MASK, buf[0] + bias[1]); -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2, -+ MTK_PHY_DA_TX_I2MPB_A_HBT_MASK, (buf[0] + bias[2]) << 10); -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2, -+ MTK_PHY_DA_TX_I2MPB_A_TST_MASK, buf[0] + bias[3]); -+ -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1, -+ MTK_PHY_DA_TX_I2MPB_B_GBE_MASK, (buf[1] + bias[4]) << 8); -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1, -+ MTK_PHY_DA_TX_I2MPB_B_TBT_MASK, buf[1] + bias[5]); -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2, -+ MTK_PHY_DA_TX_I2MPB_B_HBT_MASK, (buf[1] + bias[6]) << 8); -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2, -+ MTK_PHY_DA_TX_I2MPB_B_TST_MASK, buf[1] + bias[7]); -+ -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1, -+ MTK_PHY_DA_TX_I2MPB_C_GBE_MASK, (buf[2] + bias[8]) << 8); -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1, -+ MTK_PHY_DA_TX_I2MPB_C_TBT_MASK, buf[2] + bias[9]); -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2, -+ MTK_PHY_DA_TX_I2MPB_C_HBT_MASK, (buf[2] + bias[10]) << 8); -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2, -+ MTK_PHY_DA_TX_I2MPB_C_TST_MASK, buf[2] + bias[11]); -+ -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1, -+ MTK_PHY_DA_TX_I2MPB_D_GBE_MASK, (buf[3] + bias[12]) << 8); -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1, -+ MTK_PHY_DA_TX_I2MPB_D_TBT_MASK, buf[3] + bias[13]); -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2, -+ MTK_PHY_DA_TX_I2MPB_D_HBT_MASK, (buf[3] + bias[14]) << 8); -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2, -+ MTK_PHY_DA_TX_I2MPB_D_TST_MASK, buf[3] + bias[15]); -+ -+ return 0; -+} -+ -+static int tx_amp_cal_efuse(struct phy_device *phydev, u32 *buf) -+{ -+ u16 tx_amp_cal_val[4]; -+ -+ tx_amp_cal_val[0] = EFS_DA_TX_I2MPB_A(buf[0]); -+ tx_amp_cal_val[1] = EFS_DA_TX_I2MPB_B(buf[0]); -+ tx_amp_cal_val[2] = EFS_DA_TX_I2MPB_C(buf[0]); -+ tx_amp_cal_val[3] = EFS_DA_TX_I2MPB_D(buf[0]); -+ tx_amp_fill_result(phydev, tx_amp_cal_val); -+ -+ return 0; -+} -+ -+static int tx_r50_fill_result(struct phy_device *phydev, u16 tx_r50_cal_val, -+ u8 txg_calen_x) -+{ -+ int bias = 0; -+ u16 reg, val; -+ -+ if (phydev->drv->phy_id == MTK_GPHY_ID_MT7988) -+ bias = -2; -+ -+ val = clamp_val(bias + tx_r50_cal_val, 0, 63); -+ -+ switch (txg_calen_x) { -+ case PAIR_A: -+ reg = MTK_PHY_DA_TX_R50_PAIR_A; -+ break; -+ case PAIR_B: -+ reg = MTK_PHY_DA_TX_R50_PAIR_B; -+ break; -+ case PAIR_C: -+ reg = MTK_PHY_DA_TX_R50_PAIR_C; -+ break; -+ case PAIR_D: -+ reg = MTK_PHY_DA_TX_R50_PAIR_D; -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, reg, val | val << 8); -+ -+ return 0; -+} -+ -+static int tx_r50_cal_efuse(struct phy_device *phydev, u32 *buf, -+ u8 txg_calen_x) -+{ -+ u16 tx_r50_cal_val; -+ -+ switch (txg_calen_x) { -+ case PAIR_A: -+ tx_r50_cal_val = EFS_DA_TX_R50_A(buf[1]); -+ break; -+ case PAIR_B: -+ tx_r50_cal_val = EFS_DA_TX_R50_B(buf[1]); -+ break; -+ case PAIR_C: -+ tx_r50_cal_val = EFS_DA_TX_R50_C(buf[2]); -+ break; -+ case PAIR_D: -+ tx_r50_cal_val = EFS_DA_TX_R50_D(buf[2]); -+ break; -+ default: -+ return -EINVAL; -+ } -+ tx_r50_fill_result(phydev, tx_r50_cal_val, txg_calen_x); -+ -+ return 0; -+} -+ -+static int tx_vcm_cal_sw(struct phy_device *phydev, u8 rg_txreserve_x) -+{ -+ u8 lower_idx, upper_idx, txreserve_val; -+ u8 lower_ret, upper_ret; -+ int ret; -+ -+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0, -+ MTK_PHY_RG_ANA_CALEN); -+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0, -+ MTK_PHY_RG_CAL_CKINV); -+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1, -+ MTK_PHY_RG_TXVOS_CALEN); -+ -+ switch (rg_txreserve_x) { -+ case PAIR_A: -+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, -+ MTK_PHY_RG_DASN_DAC_IN0_A, -+ MTK_PHY_DASN_DAC_IN0_A_MASK); -+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, -+ MTK_PHY_RG_DASN_DAC_IN1_A, -+ MTK_PHY_DASN_DAC_IN1_A_MASK); -+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, -+ MTK_PHY_RG_ANA_CAL_RG0, -+ MTK_PHY_RG_ZCALEN_A); -+ break; -+ case PAIR_B: -+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, -+ MTK_PHY_RG_DASN_DAC_IN0_B, -+ MTK_PHY_DASN_DAC_IN0_B_MASK); -+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, -+ MTK_PHY_RG_DASN_DAC_IN1_B, -+ MTK_PHY_DASN_DAC_IN1_B_MASK); -+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, -+ MTK_PHY_RG_ANA_CAL_RG1, -+ MTK_PHY_RG_ZCALEN_B); -+ break; -+ case PAIR_C: -+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, -+ MTK_PHY_RG_DASN_DAC_IN0_C, -+ MTK_PHY_DASN_DAC_IN0_C_MASK); -+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, -+ MTK_PHY_RG_DASN_DAC_IN1_C, -+ MTK_PHY_DASN_DAC_IN1_C_MASK); -+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, -+ MTK_PHY_RG_ANA_CAL_RG1, -+ MTK_PHY_RG_ZCALEN_C); -+ break; -+ case PAIR_D: -+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, -+ MTK_PHY_RG_DASN_DAC_IN0_D, -+ MTK_PHY_DASN_DAC_IN0_D_MASK); -+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, -+ MTK_PHY_RG_DASN_DAC_IN1_D, -+ MTK_PHY_DASN_DAC_IN1_D_MASK); -+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, -+ MTK_PHY_RG_ANA_CAL_RG1, -+ MTK_PHY_RG_ZCALEN_D); -+ break; -+ default: -+ ret = -EINVAL; -+ goto restore; -+ } -+ -+ lower_idx = TXRESERVE_MIN; -+ upper_idx = TXRESERVE_MAX; -+ -+ phydev_dbg(phydev, "Start TX-VCM SW cal.\n"); -+ while ((upper_idx - lower_idx) > 1) { -+ txreserve_val = DIV_ROUND_CLOSEST(lower_idx + upper_idx, 2); -+ ret = cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9, -+ MTK_PHY_DA_RX_PSBN_TBT_MASK | -+ MTK_PHY_DA_RX_PSBN_HBT_MASK | -+ MTK_PHY_DA_RX_PSBN_GBE_MASK | -+ MTK_PHY_DA_RX_PSBN_LP_MASK, -+ txreserve_val << 12 | txreserve_val << 8 | -+ txreserve_val << 4 | txreserve_val); -+ if (ret == 1) { -+ upper_idx = txreserve_val; -+ upper_ret = ret; -+ } else if (ret == 0) { -+ lower_idx = txreserve_val; -+ lower_ret = ret; -+ } else { -+ goto restore; -+ } -+ } -+ -+ if (lower_idx == TXRESERVE_MIN) { -+ lower_ret = cal_cycle(phydev, MDIO_MMD_VEND1, -+ MTK_PHY_RXADC_CTRL_RG9, -+ MTK_PHY_DA_RX_PSBN_TBT_MASK | -+ MTK_PHY_DA_RX_PSBN_HBT_MASK | -+ MTK_PHY_DA_RX_PSBN_GBE_MASK | -+ MTK_PHY_DA_RX_PSBN_LP_MASK, -+ lower_idx << 12 | lower_idx << 8 | -+ lower_idx << 4 | lower_idx); -+ ret = lower_ret; -+ } else if (upper_idx == TXRESERVE_MAX) { -+ upper_ret = cal_cycle(phydev, MDIO_MMD_VEND1, -+ MTK_PHY_RXADC_CTRL_RG9, -+ MTK_PHY_DA_RX_PSBN_TBT_MASK | -+ MTK_PHY_DA_RX_PSBN_HBT_MASK | -+ MTK_PHY_DA_RX_PSBN_GBE_MASK | -+ MTK_PHY_DA_RX_PSBN_LP_MASK, -+ upper_idx << 12 | upper_idx << 8 | -+ upper_idx << 4 | upper_idx); -+ ret = upper_ret; -+ } -+ if (ret < 0) -+ goto restore; -+ -+ /* We calibrate TX-VCM in different logic. Check upper index and then -+ * lower index. If this calibration is valid, apply lower index's result. -+ */ -+ ret = upper_ret - lower_ret; -+ if (ret == 1) { -+ ret = 0; -+ /* Make sure we use upper_idx in our calibration system */ -+ cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9, -+ MTK_PHY_DA_RX_PSBN_TBT_MASK | -+ MTK_PHY_DA_RX_PSBN_HBT_MASK | -+ MTK_PHY_DA_RX_PSBN_GBE_MASK | -+ MTK_PHY_DA_RX_PSBN_LP_MASK, -+ upper_idx << 12 | upper_idx << 8 | -+ upper_idx << 4 | upper_idx); -+ phydev_dbg(phydev, "TX-VCM SW cal result: 0x%x\n", upper_idx); -+ } else if (lower_idx == TXRESERVE_MIN && upper_ret == 1 && -+ lower_ret == 1) { -+ ret = 0; -+ cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9, -+ MTK_PHY_DA_RX_PSBN_TBT_MASK | -+ MTK_PHY_DA_RX_PSBN_HBT_MASK | -+ MTK_PHY_DA_RX_PSBN_GBE_MASK | -+ MTK_PHY_DA_RX_PSBN_LP_MASK, -+ lower_idx << 12 | lower_idx << 8 | -+ lower_idx << 4 | lower_idx); -+ phydev_warn(phydev, "TX-VCM SW cal result at low margin 0x%x\n", -+ lower_idx); -+ } else if (upper_idx == TXRESERVE_MAX && upper_ret == 0 && -+ lower_ret == 0) { -+ ret = 0; -+ phydev_warn(phydev, "TX-VCM SW cal result at high margin 0x%x\n", -+ upper_idx); -+ } else { -+ ret = -EINVAL; -+ } -+ -+restore: -+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0, -+ MTK_PHY_RG_ANA_CALEN); -+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1, -+ MTK_PHY_RG_TXVOS_CALEN); -+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0, -+ MTK_PHY_RG_ZCALEN_A); -+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1, -+ MTK_PHY_RG_ZCALEN_B | MTK_PHY_RG_ZCALEN_C | -+ MTK_PHY_RG_ZCALEN_D); -+ -+ return ret; -+} -+ -+static void mt798x_phy_common_finetune(struct phy_device *phydev) -+{ -+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); -+ /* EnabRandUpdTrig = 1 */ -+ __phy_write(phydev, 0x11, 0x2f00); -+ __phy_write(phydev, 0x12, 0xe); -+ __phy_write(phydev, 0x10, 0x8fb0); -+ -+ /* NormMseLoThresh = 85 */ -+ __phy_write(phydev, 0x11, 0x55a0); -+ __phy_write(phydev, 0x12, 0x0); -+ __phy_write(phydev, 0x10, 0x83aa); -+ -+ /* TrFreeze = 0 */ -+ __phy_write(phydev, 0x11, 0x0); -+ __phy_write(phydev, 0x12, 0x0); -+ __phy_write(phydev, 0x10, 0x9686); -+ -+ /* SSTrKp1000Slv = 5 */ -+ __phy_write(phydev, 0x11, 0xbaef); -+ __phy_write(phydev, 0x12, 0x2e); -+ __phy_write(phydev, 0x10, 0x968c); -+ -+ /* MrvlTrFix100Kp = 3, MrvlTrFix100Kf = 2, -+ * MrvlTrFix1000Kp = 3, MrvlTrFix1000Kf = 2 -+ */ -+ __phy_write(phydev, 0x11, 0xd10a); -+ __phy_write(phydev, 0x12, 0x34); -+ __phy_write(phydev, 0x10, 0x8f82); -+ -+ /* VcoSlicerThreshBitsHigh */ -+ __phy_write(phydev, 0x11, 0x5555); -+ __phy_write(phydev, 0x12, 0x55); -+ __phy_write(phydev, 0x10, 0x8ec0); -+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); -+ -+ /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 9*/ -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234, -+ MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK, -+ BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0x9)); -+ -+ /* rg_tr_lpf_cnt_val = 512 */ -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LPF_CNT_VAL, 0x200); -+ -+ /* IIR2 related */ -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_L, 0x82); -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_U, 0x0); -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_L, 0x103); -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_U, 0x0); -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_L, 0x82); -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_U, 0x0); -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_L, 0xd177); -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_U, 0x3); -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_L, 0x2c82); -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_U, 0xe); -+ -+ /* FFE peaking */ -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27C, -+ MTK_PHY_VGASTATE_FFE_THR_ST1_MASK, 0x1b << 8); -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27D, -+ MTK_PHY_VGASTATE_FFE_THR_ST2_MASK, 0x1e); -+ -+ /* Disable LDO pump */ -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRAB, 0x0); -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRCD, 0x0); -+ /* Adjust LDO output voltage */ -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_OUTPUT_V, 0x2222); -+} -+ -+static void mt7981_phy_finetune(struct phy_device *phydev) -+{ -+ u16 val[8] = { 0x01ce, 0x01c1, -+ 0x020f, 0x0202, -+ 0x03d0, 0x03c0, -+ 0x0013, 0x0005 }; -+ int i, k; -+ -+ /* 100M eye finetune: -+ * Keep middle level of TX MLT3 shapper as default. -+ * Only change TX MLT3 overshoot level here. -+ */ -+ for (k = 0, i = 1; i < 12; i++) { -+ if (i % 3 == 0) -+ continue; -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[k++]); -+ } -+ -+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); -+ /* SlvDSPreadyTime = 24, MasDSPreadyTime = 24 */ -+ __phy_write(phydev, 0x11, 0xc71); -+ __phy_write(phydev, 0x12, 0xc); -+ __phy_write(phydev, 0x10, 0x8fae); -+ -+ /* ResetSyncOffset = 6 */ -+ __phy_write(phydev, 0x11, 0x600); -+ __phy_write(phydev, 0x12, 0x0); -+ __phy_write(phydev, 0x10, 0x8fc0); -+ -+ /* VgaDecRate = 1 */ -+ __phy_write(phydev, 0x11, 0x4c2a); -+ __phy_write(phydev, 0x12, 0x3e); -+ __phy_write(phydev, 0x10, 0x8fa4); -+ -+ /* FfeUpdGainForce = 4 */ -+ __phy_write(phydev, 0x11, 0x240); -+ __phy_write(phydev, 0x12, 0x0); -+ __phy_write(phydev, 0x10, 0x9680); -+ -+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); -+} -+ -+static void mt7988_phy_finetune(struct phy_device *phydev) -+{ -+ u16 val[12] = { 0x0187, 0x01cd, 0x01c8, 0x0182, -+ 0x020d, 0x0206, 0x0384, 0x03d0, -+ 0x03c6, 0x030a, 0x0011, 0x0005 }; -+ int i; -+ -+ /* Set default MLT3 shaper first */ -+ for (i = 0; i < 12; i++) -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[i]); -+ -+ /* TCT finetune */ -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_TX_FILTER, 0x5); -+ -+ /* Disable TX power saving */ -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG7, -+ MTK_PHY_DA_AD_BUF_BIAS_LP_MASK, 0x3 << 8); -+ -+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); -+ -+ /* SlvDSPreadyTime = 24, MasDSPreadyTime = 12 */ -+ __phy_write(phydev, 0x11, 0x671); -+ __phy_write(phydev, 0x12, 0xc); -+ __phy_write(phydev, 0x10, 0x8fae); -+ -+ /* ResetSyncOffset = 5 */ -+ __phy_write(phydev, 0x11, 0x500); -+ __phy_write(phydev, 0x12, 0x0); -+ __phy_write(phydev, 0x10, 0x8fc0); -+ -+ /* VgaDecRate is 1 at default on mt7988 */ -+ -+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); -+ -+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_2A30); -+ /* TxClkOffset = 2 */ -+ __phy_modify(phydev, MTK_PHY_ANARG_RG, MTK_PHY_TCLKOFFSET_MASK, -+ FIELD_PREP(MTK_PHY_TCLKOFFSET_MASK, 0x2)); -+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); -+} -+ -+static void mt798x_phy_eee(struct phy_device *phydev) -+{ -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, -+ MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG120, -+ MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK | -+ MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK, -+ FIELD_PREP(MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK, 0x0) | -+ FIELD_PREP(MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK, 0x14)); -+ -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, -+ MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122, -+ MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK, -+ FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK, -+ 0xff)); -+ -+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, -+ MTK_PHY_RG_TESTMUX_ADC_CTRL, -+ MTK_PHY_RG_TXEN_DIG_MASK); -+ -+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, -+ MTK_PHY_RG_DEV1E_REG19b, MTK_PHY_BYPASS_DSP_LPI_READY); -+ -+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, -+ MTK_PHY_RG_DEV1E_REG234, MTK_PHY_TR_LP_IIR_EEE_EN); -+ -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG238, -+ MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK | -+ MTK_PHY_LPI_SLV_SEND_TX_EN, -+ FIELD_PREP(MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK, 0x120)); -+ -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG239, -+ MTK_PHY_LPI_SEND_LOC_TIMER_MASK | -+ MTK_PHY_LPI_TXPCS_LOC_RCV, -+ FIELD_PREP(MTK_PHY_LPI_SEND_LOC_TIMER_MASK, 0x117)); -+ -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2C7, -+ MTK_PHY_MAX_GAIN_MASK | MTK_PHY_MIN_GAIN_MASK, -+ FIELD_PREP(MTK_PHY_MAX_GAIN_MASK, 0x8) | -+ FIELD_PREP(MTK_PHY_MIN_GAIN_MASK, 0x13)); -+ -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2D1, -+ MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK, -+ FIELD_PREP(MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK, -+ 0x33) | -+ MTK_PHY_LPI_SKIP_SD_SLV_TR | MTK_PHY_LPI_TR_READY | -+ MTK_PHY_LPI_VCO_EEE_STG0_EN); -+ -+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG323, -+ MTK_PHY_EEE_WAKE_MAS_INT_DC | -+ MTK_PHY_EEE_WAKE_SLV_INT_DC); -+ -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG324, -+ MTK_PHY_SMI_DETCNT_MAX_MASK, -+ FIELD_PREP(MTK_PHY_SMI_DETCNT_MAX_MASK, 0x3f) | -+ MTK_PHY_SMI_DET_MAX_EN); -+ -+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG326, -+ MTK_PHY_LPI_MODE_SD_ON | MTK_PHY_RESET_RANDUPD_CNT | -+ MTK_PHY_TREC_UPDATE_ENAB_CLR | -+ MTK_PHY_LPI_QUIT_WAIT_DFE_SIG_DET_OFF | -+ MTK_PHY_TR_READY_SKIP_AFE_WAKEUP); -+ -+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); -+ /* Regsigdet_sel_1000 = 0 */ -+ __phy_write(phydev, 0x11, 0xb); -+ __phy_write(phydev, 0x12, 0x0); -+ __phy_write(phydev, 0x10, 0x9690); -+ -+ /* REG_EEE_st2TrKf1000 = 3 */ -+ __phy_write(phydev, 0x11, 0x114f); -+ __phy_write(phydev, 0x12, 0x2); -+ __phy_write(phydev, 0x10, 0x969a); -+ -+ /* RegEEE_slv_wake_tr_timer_tar = 6, RegEEE_slv_remtx_timer_tar = 20 */ -+ __phy_write(phydev, 0x11, 0x3028); -+ __phy_write(phydev, 0x12, 0x0); -+ __phy_write(phydev, 0x10, 0x969e); -+ -+ /* RegEEE_slv_wake_int_timer_tar = 8 */ -+ __phy_write(phydev, 0x11, 0x5010); -+ __phy_write(phydev, 0x12, 0x0); -+ __phy_write(phydev, 0x10, 0x96a0); -+ -+ /* RegEEE_trfreeze_timer2 = 586 */ -+ __phy_write(phydev, 0x11, 0x24a); -+ __phy_write(phydev, 0x12, 0x0); -+ __phy_write(phydev, 0x10, 0x96a8); -+ -+ /* RegEEE100Stg1_tar = 16 */ -+ __phy_write(phydev, 0x11, 0x3210); -+ __phy_write(phydev, 0x12, 0x0); -+ __phy_write(phydev, 0x10, 0x96b8); -+ -+ /* REGEEE_wake_slv_tr_wait_dfesigdet_en = 1 */ -+ __phy_write(phydev, 0x11, 0x1463); -+ __phy_write(phydev, 0x12, 0x0); -+ __phy_write(phydev, 0x10, 0x96ca); -+ -+ /* DfeTailEnableVgaThresh1000 = 27 */ -+ __phy_write(phydev, 0x11, 0x36); -+ __phy_write(phydev, 0x12, 0x0); -+ __phy_write(phydev, 0x10, 0x8f80); -+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); -+ -+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_3); -+ __phy_modify(phydev, MTK_PHY_LPI_REG_14, MTK_PHY_LPI_WAKE_TIMER_1000_MASK, -+ FIELD_PREP(MTK_PHY_LPI_WAKE_TIMER_1000_MASK, 0x19c)); -+ -+ __phy_modify(phydev, MTK_PHY_LPI_REG_1c, MTK_PHY_SMI_DET_ON_THRESH_MASK, -+ FIELD_PREP(MTK_PHY_SMI_DET_ON_THRESH_MASK, 0xc)); -+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); -+ -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, -+ MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122, -+ MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK, -+ FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK, 0xff)); -+} -+ -+static int cal_sw(struct phy_device *phydev, enum CAL_ITEM cal_item, -+ u8 start_pair, u8 end_pair) -+{ -+ u8 pair_n; -+ int ret; -+ -+ for (pair_n = start_pair; pair_n <= end_pair; pair_n++) { -+ /* TX_OFFSET & TX_AMP have no SW calibration. */ -+ switch (cal_item) { -+ case TX_VCM: -+ ret = tx_vcm_cal_sw(phydev, pair_n); -+ break; -+ default: -+ return -EINVAL; -+ } -+ if (ret) -+ return ret; -+ } -+ return 0; -+} -+ -+static int cal_efuse(struct phy_device *phydev, enum CAL_ITEM cal_item, -+ u8 start_pair, u8 end_pair, u32 *buf) -+{ -+ u8 pair_n; -+ int ret; -+ -+ for (pair_n = start_pair; pair_n <= end_pair; pair_n++) { -+ /* TX_VCM has no efuse calibration. */ -+ switch (cal_item) { -+ case REXT: -+ ret = rext_cal_efuse(phydev, buf); -+ break; -+ case TX_OFFSET: -+ ret = tx_offset_cal_efuse(phydev, buf); -+ break; -+ case TX_AMP: -+ ret = tx_amp_cal_efuse(phydev, buf); -+ break; -+ case TX_R50: -+ ret = tx_r50_cal_efuse(phydev, buf, pair_n); -+ break; -+ default: -+ return -EINVAL; -+ } -+ if (ret) -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static int start_cal(struct phy_device *phydev, enum CAL_ITEM cal_item, -+ enum CAL_MODE cal_mode, u8 start_pair, -+ u8 end_pair, u32 *buf) -+{ -+ int ret; -+ -+ switch (cal_mode) { -+ case EFUSE_M: -+ ret = cal_efuse(phydev, cal_item, start_pair, -+ end_pair, buf); -+ break; -+ case SW_M: -+ ret = cal_sw(phydev, cal_item, start_pair, end_pair); -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ if (ret) { -+ phydev_err(phydev, "cal %d failed\n", cal_item); -+ return -EIO; -+ } -+ -+ return 0; -+} -+ -+static int mt798x_phy_calibration(struct phy_device *phydev) -+{ -+ int ret = 0; -+ u32 *buf; -+ size_t len; -+ struct nvmem_cell *cell; -+ -+ cell = nvmem_cell_get(&phydev->mdio.dev, "phy-cal-data"); -+ if (IS_ERR(cell)) { -+ if (PTR_ERR(cell) == -EPROBE_DEFER) -+ return PTR_ERR(cell); -+ return 0; -+ } -+ -+ buf = (u32 *)nvmem_cell_read(cell, &len); -+ if (IS_ERR(buf)) -+ return PTR_ERR(buf); -+ nvmem_cell_put(cell); -+ -+ if (!buf[0] || !buf[1] || !buf[2] || !buf[3] || len < 4 * sizeof(u32)) { -+ phydev_err(phydev, "invalid efuse data\n"); -+ ret = -EINVAL; -+ goto out; -+ } -+ -+ ret = start_cal(phydev, REXT, EFUSE_M, NO_PAIR, NO_PAIR, buf); -+ if (ret) -+ goto out; -+ ret = start_cal(phydev, TX_OFFSET, EFUSE_M, NO_PAIR, NO_PAIR, buf); -+ if (ret) -+ goto out; -+ ret = start_cal(phydev, TX_AMP, EFUSE_M, NO_PAIR, NO_PAIR, buf); -+ if (ret) -+ goto out; -+ ret = start_cal(phydev, TX_R50, EFUSE_M, PAIR_A, PAIR_D, buf); -+ if (ret) -+ goto out; -+ ret = start_cal(phydev, TX_VCM, SW_M, PAIR_A, PAIR_A, buf); -+ if (ret) -+ goto out; -+ -+out: -+ kfree(buf); -+ return ret; -+} -+ -+static int mt798x_phy_config_init(struct phy_device *phydev) -+{ -+ switch (phydev->drv->phy_id) { -+ case MTK_GPHY_ID_MT7981: -+ mt7981_phy_finetune(phydev); -+ break; -+ case MTK_GPHY_ID_MT7988: -+ mt7988_phy_finetune(phydev); -+ break; -+ } -+ -+ mt798x_phy_common_finetune(phydev); -+ mt798x_phy_eee(phydev); -+ -+ return mt798x_phy_calibration(phydev); -+} -+ -+static struct phy_driver mtk_socphy_driver[] = { -+ { -+ PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981), -+ .name = "MediaTek MT7981 PHY", -+ .config_init = mt798x_phy_config_init, -+ .config_intr = genphy_no_config_intr, -+ .handle_interrupt = genphy_handle_interrupt_no_ack, -+ .probe = mt798x_phy_calibration, -+ .suspend = genphy_suspend, -+ .resume = genphy_resume, -+ .read_page = mtk_socphy_read_page, -+ .write_page = mtk_socphy_write_page, -+ }, -+ { -+ PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988), -+ .name = "MediaTek MT7988 PHY", -+ .config_init = mt798x_phy_config_init, -+ .config_intr = genphy_no_config_intr, -+ .handle_interrupt = genphy_handle_interrupt_no_ack, -+ .probe = mt798x_phy_calibration, -+ .suspend = genphy_suspend, -+ .resume = genphy_resume, -+ .read_page = mtk_socphy_read_page, -+ .write_page = mtk_socphy_write_page, -+ }, -+}; -+ -+module_phy_driver(mtk_socphy_driver); -+ -+static struct mdio_device_id __maybe_unused mtk_socphy_tbl[] = { -+ { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981) }, -+ { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988) }, -+ { } -+}; -+ -+MODULE_DESCRIPTION("MediaTek SoC Gigabit Ethernet PHY driver"); -+MODULE_AUTHOR("Daniel Golle "); -+MODULE_AUTHOR("SkyLake Huang "); -+MODULE_LICENSE("GPL"); -+ -+MODULE_DEVICE_TABLE(mdio, mtk_socphy_tbl); ---- a/drivers/net/phy/mediatek-ge.c -+++ b/drivers/net/phy/mediatek-ge.c -@@ -136,7 +136,8 @@ static struct phy_driver mtk_gephy_drive - module_phy_driver(mtk_gephy_driver); - - static struct mdio_device_id __maybe_unused mtk_gephy_tbl[] = { -- { PHY_ID_MATCH_VENDOR(0x03a29400) }, -+ { PHY_ID_MATCH_EXACT(0x03a29441) }, -+ { PHY_ID_MATCH_EXACT(0x03a29412) }, - { } - }; - diff --git a/target/linux/mediatek/patches-6.1/731-v6.5-net-phy-mediatek-ge-soc-support-PHY-LEDs.patch b/target/linux/mediatek/patches-6.1/731-v6.5-net-phy-mediatek-ge-soc-support-PHY-LEDs.patch deleted file mode 100644 index 286ce96a7de..00000000000 --- a/target/linux/mediatek/patches-6.1/731-v6.5-net-phy-mediatek-ge-soc-support-PHY-LEDs.patch +++ /dev/null @@ -1,524 +0,0 @@ -From c66937b0f8dbb4c6c043663c702b1053fb47fab2 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Mon, 14 Aug 2023 02:58:14 +0100 -Subject: [PATCH] net: phy: mediatek-ge-soc: support PHY LEDs - -Implement netdev trigger and primitive bliking offloading as well as -simple set_brigthness function for both PHY LEDs of the in-SoC PHYs -found in MT7981 and MT7988. - -For MT7988, read boottrap register and apply LED polarities accordingly -to get uniform behavior from all LEDs on MT7988. -This requires syscon phandle 'mediatek,pio' present in parenting MDIO bus -which should point to the syscon holding the boottrap register. - -Signed-off-by: Daniel Golle -Reviewed-by: Andrew Lunn -Link: https://lore.kernel.org/r/dc324d48c00cd7350f3a506eaa785324cae97372.1691977904.git.daniel@makrotopia.org -Signed-off-by: Jakub Kicinski ---- - drivers/net/phy/mediatek-ge-soc.c | 435 +++++++++++++++++++++++++++++- - 1 file changed, 426 insertions(+), 9 deletions(-) - ---- a/drivers/net/phy/mediatek-ge-soc.c -+++ b/drivers/net/phy/mediatek-ge-soc.c -@@ -1,11 +1,14 @@ - // SPDX-License-Identifier: GPL-2.0+ - #include -+#include -+#include - #include - #include - #include - #include - #include - #include -+#include - - #define MTK_GPHY_ID_MT7981 0x03a29461 - #define MTK_GPHY_ID_MT7988 0x03a29481 -@@ -208,9 +211,42 @@ - #define MTK_PHY_DA_TX_R50_PAIR_C 0x53f - #define MTK_PHY_DA_TX_R50_PAIR_D 0x540 - -+/* Registers on MDIO_MMD_VEND2 */ -+#define MTK_PHY_LED0_ON_CTRL 0x24 -+#define MTK_PHY_LED1_ON_CTRL 0x26 -+#define MTK_PHY_LED_ON_MASK GENMASK(6, 0) -+#define MTK_PHY_LED_ON_LINK1000 BIT(0) -+#define MTK_PHY_LED_ON_LINK100 BIT(1) -+#define MTK_PHY_LED_ON_LINK10 BIT(2) -+#define MTK_PHY_LED_ON_LINKDOWN BIT(3) -+#define MTK_PHY_LED_ON_FDX BIT(4) /* Full duplex */ -+#define MTK_PHY_LED_ON_HDX BIT(5) /* Half duplex */ -+#define MTK_PHY_LED_ON_FORCE_ON BIT(6) -+#define MTK_PHY_LED_ON_POLARITY BIT(14) -+#define MTK_PHY_LED_ON_ENABLE BIT(15) -+ -+#define MTK_PHY_LED0_BLINK_CTRL 0x25 -+#define MTK_PHY_LED1_BLINK_CTRL 0x27 -+#define MTK_PHY_LED_BLINK_1000TX BIT(0) -+#define MTK_PHY_LED_BLINK_1000RX BIT(1) -+#define MTK_PHY_LED_BLINK_100TX BIT(2) -+#define MTK_PHY_LED_BLINK_100RX BIT(3) -+#define MTK_PHY_LED_BLINK_10TX BIT(4) -+#define MTK_PHY_LED_BLINK_10RX BIT(5) -+#define MTK_PHY_LED_BLINK_COLLISION BIT(6) -+#define MTK_PHY_LED_BLINK_RX_CRC_ERR BIT(7) -+#define MTK_PHY_LED_BLINK_RX_IDLE_ERR BIT(8) -+#define MTK_PHY_LED_BLINK_FORCE_BLINK BIT(9) -+ -+#define MTK_PHY_LED1_DEFAULT_POLARITIES BIT(1) -+ - #define MTK_PHY_RG_BG_RASEL 0x115 - #define MTK_PHY_RG_BG_RASEL_MASK GENMASK(2, 0) - -+/* 'boottrap' register reflecting the configuration of the 4 PHY LEDs */ -+#define RG_GPIO_MISC_TPBANK0 0x6f0 -+#define RG_GPIO_MISC_TPBANK0_BOOTMODE GENMASK(11, 8) -+ - /* These macro privides efuse parsing for internal phy. */ - #define EFS_DA_TX_I2MPB_A(x) (((x) >> 0) & GENMASK(5, 0)) - #define EFS_DA_TX_I2MPB_B(x) (((x) >> 6) & GENMASK(5, 0)) -@@ -238,13 +274,6 @@ enum { - PAIR_D, - }; - --enum { -- GPHY_PORT0, -- GPHY_PORT1, -- GPHY_PORT2, -- GPHY_PORT3, --}; -- - enum calibration_mode { - EFUSE_K, - SW_K -@@ -263,6 +292,19 @@ enum CAL_MODE { - SW_M - }; - -+#define MTK_PHY_LED_STATE_FORCE_ON 0 -+#define MTK_PHY_LED_STATE_FORCE_BLINK 1 -+#define MTK_PHY_LED_STATE_NETDEV 2 -+ -+struct mtk_socphy_priv { -+ unsigned long led_state; -+}; -+ -+struct mtk_socphy_shared { -+ u32 boottrap; -+ struct mtk_socphy_priv priv[4]; -+}; -+ - static int mtk_socphy_read_page(struct phy_device *phydev) - { - return __phy_read(phydev, MTK_EXT_PAGE_ACCESS); -@@ -1073,6 +1115,371 @@ static int mt798x_phy_config_init(struct - return mt798x_phy_calibration(phydev); - } - -+static int mt798x_phy_hw_led_on_set(struct phy_device *phydev, u8 index, -+ bool on) -+{ -+ unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0); -+ struct mtk_socphy_priv *priv = phydev->priv; -+ bool changed; -+ -+ if (on) -+ changed = !test_and_set_bit(bit_on, &priv->led_state); -+ else -+ changed = !!test_and_clear_bit(bit_on, &priv->led_state); -+ -+ changed |= !!test_and_clear_bit(MTK_PHY_LED_STATE_NETDEV + -+ (index ? 16 : 0), &priv->led_state); -+ if (changed) -+ return phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ? -+ MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL, -+ MTK_PHY_LED_ON_MASK, -+ on ? MTK_PHY_LED_ON_FORCE_ON : 0); -+ else -+ return 0; -+} -+ -+static int mt798x_phy_hw_led_blink_set(struct phy_device *phydev, u8 index, -+ bool blinking) -+{ -+ unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK + (index ? 16 : 0); -+ struct mtk_socphy_priv *priv = phydev->priv; -+ bool changed; -+ -+ if (blinking) -+ changed = !test_and_set_bit(bit_blink, &priv->led_state); -+ else -+ changed = !!test_and_clear_bit(bit_blink, &priv->led_state); -+ -+ changed |= !!test_bit(MTK_PHY_LED_STATE_NETDEV + -+ (index ? 16 : 0), &priv->led_state); -+ if (changed) -+ return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ? -+ MTK_PHY_LED1_BLINK_CTRL : MTK_PHY_LED0_BLINK_CTRL, -+ blinking ? MTK_PHY_LED_BLINK_FORCE_BLINK : 0); -+ else -+ return 0; -+} -+ -+static int mt798x_phy_led_blink_set(struct phy_device *phydev, u8 index, -+ unsigned long *delay_on, -+ unsigned long *delay_off) -+{ -+ bool blinking = false; -+ int err = 0; -+ -+ if (index > 1) -+ return -EINVAL; -+ -+ if (delay_on && delay_off && (*delay_on > 0) && (*delay_off > 0)) { -+ blinking = true; -+ *delay_on = 50; -+ *delay_off = 50; -+ } -+ -+ err = mt798x_phy_hw_led_blink_set(phydev, index, blinking); -+ if (err) -+ return err; -+ -+ return mt798x_phy_hw_led_on_set(phydev, index, false); -+} -+ -+static int mt798x_phy_led_brightness_set(struct phy_device *phydev, -+ u8 index, enum led_brightness value) -+{ -+ int err; -+ -+ err = mt798x_phy_hw_led_blink_set(phydev, index, false); -+ if (err) -+ return err; -+ -+ return mt798x_phy_hw_led_on_set(phydev, index, (value != LED_OFF)); -+} -+ -+static const unsigned long supported_triggers = (BIT(TRIGGER_NETDEV_FULL_DUPLEX) | -+ BIT(TRIGGER_NETDEV_HALF_DUPLEX) | -+ BIT(TRIGGER_NETDEV_LINK) | -+ BIT(TRIGGER_NETDEV_LINK_10) | -+ BIT(TRIGGER_NETDEV_LINK_100) | -+ BIT(TRIGGER_NETDEV_LINK_1000) | -+ BIT(TRIGGER_NETDEV_RX) | -+ BIT(TRIGGER_NETDEV_TX)); -+ -+static int mt798x_phy_led_hw_is_supported(struct phy_device *phydev, u8 index, -+ unsigned long rules) -+{ -+ if (index > 1) -+ return -EINVAL; -+ -+ /* All combinations of the supported triggers are allowed */ -+ if (rules & ~supported_triggers) -+ return -EOPNOTSUPP; -+ -+ return 0; -+}; -+ -+static int mt798x_phy_led_hw_control_get(struct phy_device *phydev, u8 index, -+ unsigned long *rules) -+{ -+ unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK + (index ? 16 : 0); -+ unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0); -+ unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0); -+ struct mtk_socphy_priv *priv = phydev->priv; -+ int on, blink; -+ -+ if (index > 1) -+ return -EINVAL; -+ -+ on = phy_read_mmd(phydev, MDIO_MMD_VEND2, -+ index ? MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL); -+ -+ if (on < 0) -+ return -EIO; -+ -+ blink = phy_read_mmd(phydev, MDIO_MMD_VEND2, -+ index ? MTK_PHY_LED1_BLINK_CTRL : -+ MTK_PHY_LED0_BLINK_CTRL); -+ if (blink < 0) -+ return -EIO; -+ -+ if ((on & (MTK_PHY_LED_ON_LINK1000 | MTK_PHY_LED_ON_LINK100 | -+ MTK_PHY_LED_ON_LINK10)) || -+ (blink & (MTK_PHY_LED_BLINK_1000RX | MTK_PHY_LED_BLINK_100RX | -+ MTK_PHY_LED_BLINK_10RX | MTK_PHY_LED_BLINK_1000TX | -+ MTK_PHY_LED_BLINK_100TX | MTK_PHY_LED_BLINK_10TX))) -+ set_bit(bit_netdev, &priv->led_state); -+ else -+ clear_bit(bit_netdev, &priv->led_state); -+ -+ if (on & MTK_PHY_LED_ON_FORCE_ON) -+ set_bit(bit_on, &priv->led_state); -+ else -+ clear_bit(bit_on, &priv->led_state); -+ -+ if (blink & MTK_PHY_LED_BLINK_FORCE_BLINK) -+ set_bit(bit_blink, &priv->led_state); -+ else -+ clear_bit(bit_blink, &priv->led_state); -+ -+ if (!rules) -+ return 0; -+ -+ if (on & (MTK_PHY_LED_ON_LINK1000 | MTK_PHY_LED_ON_LINK100 | MTK_PHY_LED_ON_LINK10)) -+ *rules |= BIT(TRIGGER_NETDEV_LINK); -+ -+ if (on & MTK_PHY_LED_ON_LINK10) -+ *rules |= BIT(TRIGGER_NETDEV_LINK_10); -+ -+ if (on & MTK_PHY_LED_ON_LINK100) -+ *rules |= BIT(TRIGGER_NETDEV_LINK_100); -+ -+ if (on & MTK_PHY_LED_ON_LINK1000) -+ *rules |= BIT(TRIGGER_NETDEV_LINK_1000); -+ -+ if (on & MTK_PHY_LED_ON_FDX) -+ *rules |= BIT(TRIGGER_NETDEV_FULL_DUPLEX); -+ -+ if (on & MTK_PHY_LED_ON_HDX) -+ *rules |= BIT(TRIGGER_NETDEV_HALF_DUPLEX); -+ -+ if (blink & (MTK_PHY_LED_BLINK_1000RX | MTK_PHY_LED_BLINK_100RX | MTK_PHY_LED_BLINK_10RX)) -+ *rules |= BIT(TRIGGER_NETDEV_RX); -+ -+ if (blink & (MTK_PHY_LED_BLINK_1000TX | MTK_PHY_LED_BLINK_100TX | MTK_PHY_LED_BLINK_10TX)) -+ *rules |= BIT(TRIGGER_NETDEV_TX); -+ -+ return 0; -+}; -+ -+static int mt798x_phy_led_hw_control_set(struct phy_device *phydev, u8 index, -+ unsigned long rules) -+{ -+ unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0); -+ struct mtk_socphy_priv *priv = phydev->priv; -+ u16 on = 0, blink = 0; -+ int ret; -+ -+ if (index > 1) -+ return -EINVAL; -+ -+ if (rules & BIT(TRIGGER_NETDEV_FULL_DUPLEX)) -+ on |= MTK_PHY_LED_ON_FDX; -+ -+ if (rules & BIT(TRIGGER_NETDEV_HALF_DUPLEX)) -+ on |= MTK_PHY_LED_ON_HDX; -+ -+ if (rules & (BIT(TRIGGER_NETDEV_LINK_10) | BIT(TRIGGER_NETDEV_LINK))) -+ on |= MTK_PHY_LED_ON_LINK10; -+ -+ if (rules & (BIT(TRIGGER_NETDEV_LINK_100) | BIT(TRIGGER_NETDEV_LINK))) -+ on |= MTK_PHY_LED_ON_LINK100; -+ -+ if (rules & (BIT(TRIGGER_NETDEV_LINK_1000) | BIT(TRIGGER_NETDEV_LINK))) -+ on |= MTK_PHY_LED_ON_LINK1000; -+ -+ if (rules & BIT(TRIGGER_NETDEV_RX)) { -+ blink |= MTK_PHY_LED_BLINK_10RX | -+ MTK_PHY_LED_BLINK_100RX | -+ MTK_PHY_LED_BLINK_1000RX; -+ } -+ -+ if (rules & BIT(TRIGGER_NETDEV_TX)) { -+ blink |= MTK_PHY_LED_BLINK_10TX | -+ MTK_PHY_LED_BLINK_100TX | -+ MTK_PHY_LED_BLINK_1000TX; -+ } -+ -+ if (blink || on) -+ set_bit(bit_netdev, &priv->led_state); -+ else -+ clear_bit(bit_netdev, &priv->led_state); -+ -+ ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ? -+ MTK_PHY_LED1_ON_CTRL : -+ MTK_PHY_LED0_ON_CTRL, -+ MTK_PHY_LED_ON_FDX | -+ MTK_PHY_LED_ON_HDX | -+ MTK_PHY_LED_ON_LINK10 | -+ MTK_PHY_LED_ON_LINK100 | -+ MTK_PHY_LED_ON_LINK1000, -+ on); -+ -+ if (ret) -+ return ret; -+ -+ return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ? -+ MTK_PHY_LED1_BLINK_CTRL : -+ MTK_PHY_LED0_BLINK_CTRL, blink); -+}; -+ -+static bool mt7988_phy_led_get_polarity(struct phy_device *phydev, int led_num) -+{ -+ struct mtk_socphy_shared *priv = phydev->shared->priv; -+ u32 polarities; -+ -+ if (led_num == 0) -+ polarities = ~(priv->boottrap); -+ else -+ polarities = MTK_PHY_LED1_DEFAULT_POLARITIES; -+ -+ if (polarities & BIT(phydev->mdio.addr)) -+ return true; -+ -+ return false; -+} -+ -+static int mt7988_phy_fix_leds_polarities(struct phy_device *phydev) -+{ -+ struct pinctrl *pinctrl; -+ int index; -+ -+ /* Setup LED polarity according to bootstrap use of LED pins */ -+ for (index = 0; index < 2; ++index) -+ phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ? -+ MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL, -+ MTK_PHY_LED_ON_POLARITY, -+ mt7988_phy_led_get_polarity(phydev, index) ? -+ MTK_PHY_LED_ON_POLARITY : 0); -+ -+ /* Only now setup pinctrl to avoid bogus blinking */ -+ pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "gbe-led"); -+ if (IS_ERR(pinctrl)) -+ dev_err(&phydev->mdio.bus->dev, "Failed to setup PHY LED pinctrl\n"); -+ -+ return 0; -+} -+ -+static int mt7988_phy_probe_shared(struct phy_device *phydev) -+{ -+ struct device_node *np = dev_of_node(&phydev->mdio.bus->dev); -+ struct mtk_socphy_shared *shared = phydev->shared->priv; -+ struct regmap *regmap; -+ u32 reg; -+ int ret; -+ -+ /* The LED0 of the 4 PHYs in MT7988 are wired to SoC pins LED_A, LED_B, -+ * LED_C and LED_D respectively. At the same time those pins are used to -+ * bootstrap configuration of the reference clock source (LED_A), -+ * DRAM DDRx16b x2/x1 (LED_B) and boot device (LED_C, LED_D). -+ * In practise this is done using a LED and a resistor pulling the pin -+ * either to GND or to VIO. -+ * The detected value at boot time is accessible at run-time using the -+ * TPBANK0 register located in the gpio base of the pinctrl, in order -+ * to read it here it needs to be referenced by a phandle called -+ * 'mediatek,pio' in the MDIO bus hosting the PHY. -+ * The 4 bits in TPBANK0 are kept as package shared data and are used to -+ * set LED polarity for each of the LED0. -+ */ -+ regmap = syscon_regmap_lookup_by_phandle(np, "mediatek,pio"); -+ if (IS_ERR(regmap)) -+ return PTR_ERR(regmap); -+ -+ ret = regmap_read(regmap, RG_GPIO_MISC_TPBANK0, ®); -+ if (ret) -+ return ret; -+ -+ shared->boottrap = FIELD_GET(RG_GPIO_MISC_TPBANK0_BOOTMODE, reg); -+ -+ return 0; -+} -+ -+static void mt798x_phy_leds_state_init(struct phy_device *phydev) -+{ -+ int i; -+ -+ for (i = 0; i < 2; ++i) -+ mt798x_phy_led_hw_control_get(phydev, i, NULL); -+} -+ -+static int mt7988_phy_probe(struct phy_device *phydev) -+{ -+ struct mtk_socphy_shared *shared; -+ struct mtk_socphy_priv *priv; -+ int err; -+ -+ if (phydev->mdio.addr > 3) -+ return -EINVAL; -+ -+ err = devm_phy_package_join(&phydev->mdio.dev, phydev, 0, -+ sizeof(struct mtk_socphy_shared)); -+ if (err) -+ return err; -+ -+ if (phy_package_probe_once(phydev)) { -+ err = mt7988_phy_probe_shared(phydev); -+ if (err) -+ return err; -+ } -+ -+ shared = phydev->shared->priv; -+ priv = &shared->priv[phydev->mdio.addr]; -+ -+ phydev->priv = priv; -+ -+ mt798x_phy_leds_state_init(phydev); -+ -+ err = mt7988_phy_fix_leds_polarities(phydev); -+ if (err) -+ return err; -+ -+ return mt798x_phy_calibration(phydev); -+} -+ -+static int mt7981_phy_probe(struct phy_device *phydev) -+{ -+ struct mtk_socphy_priv *priv; -+ -+ priv = devm_kzalloc(&phydev->mdio.dev, sizeof(struct mtk_socphy_priv), -+ GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ phydev->priv = priv; -+ -+ mt798x_phy_leds_state_init(phydev); -+ -+ return mt798x_phy_calibration(phydev); -+} -+ - static struct phy_driver mtk_socphy_driver[] = { - { - PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981), -@@ -1080,11 +1487,16 @@ static struct phy_driver mtk_socphy_driv - .config_init = mt798x_phy_config_init, - .config_intr = genphy_no_config_intr, - .handle_interrupt = genphy_handle_interrupt_no_ack, -- .probe = mt798x_phy_calibration, -+ .probe = mt7981_phy_probe, - .suspend = genphy_suspend, - .resume = genphy_resume, - .read_page = mtk_socphy_read_page, - .write_page = mtk_socphy_write_page, -+ .led_blink_set = mt798x_phy_led_blink_set, -+ .led_brightness_set = mt798x_phy_led_brightness_set, -+ .led_hw_is_supported = mt798x_phy_led_hw_is_supported, -+ .led_hw_control_set = mt798x_phy_led_hw_control_set, -+ .led_hw_control_get = mt798x_phy_led_hw_control_get, - }, - { - PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988), -@@ -1092,11 +1504,16 @@ static struct phy_driver mtk_socphy_driv - .config_init = mt798x_phy_config_init, - .config_intr = genphy_no_config_intr, - .handle_interrupt = genphy_handle_interrupt_no_ack, -- .probe = mt798x_phy_calibration, -+ .probe = mt7988_phy_probe, - .suspend = genphy_suspend, - .resume = genphy_resume, - .read_page = mtk_socphy_read_page, - .write_page = mtk_socphy_write_page, -+ .led_blink_set = mt798x_phy_led_blink_set, -+ .led_brightness_set = mt798x_phy_led_brightness_set, -+ .led_hw_is_supported = mt798x_phy_led_hw_is_supported, -+ .led_hw_control_set = mt798x_phy_led_hw_control_set, -+ .led_hw_control_get = mt798x_phy_led_hw_control_get, - }, - }; - diff --git a/target/linux/mediatek/patches-6.1/732-net-phy-mxl-gpy-don-t-use-SGMII-AN-if-using-phylink.patch b/target/linux/mediatek/patches-6.1/732-net-phy-mxl-gpy-don-t-use-SGMII-AN-if-using-phylink.patch deleted file mode 100644 index 76d8b0ef008..00000000000 --- a/target/linux/mediatek/patches-6.1/732-net-phy-mxl-gpy-don-t-use-SGMII-AN-if-using-phylink.patch +++ /dev/null @@ -1,63 +0,0 @@ -From a969b663c866129ed9eb217785a6574fbe826f1d Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Thu, 6 Apr 2023 23:36:50 +0100 -Subject: [PATCH] net: phy: mxl-gpy: don't use SGMII AN if using phylink - -MAC drivers using phylink expect SGMII in-band-status to be switched off -when attached to a PHY. Make sure this is the case also for mxl-gpy which -keeps SGMII in-band-status in case of SGMII interface mode is used. - -Signed-off-by: Daniel Golle ---- - drivers/net/phy/mxl-gpy.c | 19 ++++++++++++++++--- - 1 file changed, 16 insertions(+), 3 deletions(-) - ---- a/drivers/net/phy/mxl-gpy.c -+++ b/drivers/net/phy/mxl-gpy.c -@@ -371,8 +371,11 @@ static bool gpy_2500basex_chk(struct phy - - phydev->speed = SPEED_2500; - phydev->interface = PHY_INTERFACE_MODE_2500BASEX; -- phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL, -- VSPEC1_SGMII_CTRL_ANEN, 0); -+ -+ if (!phydev->phylink) -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL, -+ VSPEC1_SGMII_CTRL_ANEN, 0); -+ - return true; - } - -@@ -396,6 +399,14 @@ static int gpy_config_aneg(struct phy_de - u32 adv; - int ret; - -+ /* Disable SGMII auto-negotiation if using phylink */ -+ if (phydev->phylink) { -+ ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL, -+ VSPEC1_SGMII_CTRL_ANEN, 0); -+ if (ret < 0) -+ return ret; -+ } -+ - if (phydev->autoneg == AUTONEG_DISABLE) { - /* Configure half duplex with genphy_setup_forced, - * because genphy_c45_pma_setup_forced does not support. -@@ -486,6 +497,8 @@ static void gpy_update_interface(struct - switch (phydev->speed) { - case SPEED_2500: - phydev->interface = PHY_INTERFACE_MODE_2500BASEX; -+ if (phydev->phylink) -+ break; - ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL, - VSPEC1_SGMII_CTRL_ANEN, 0); - if (ret < 0) -@@ -497,7 +510,7 @@ static void gpy_update_interface(struct - case SPEED_100: - case SPEED_10: - phydev->interface = PHY_INTERFACE_MODE_SGMII; -- if (gpy_sgmii_aneg_en(phydev)) -+ if (phydev->phylink || gpy_sgmii_aneg_en(phydev)) - break; - /* Enable and restart SGMII ANEG for 10/100/1000Mbps link speed - * if ANEG is disabled (in 2500-BaseX mode). diff --git a/target/linux/mediatek/patches-6.1/733-net-phy-add-driver-for-MediaTek-2.5G-PHY.patch b/target/linux/mediatek/patches-6.1/733-net-phy-add-driver-for-MediaTek-2.5G-PHY.patch deleted file mode 100644 index b4c07a4b1f0..00000000000 --- a/target/linux/mediatek/patches-6.1/733-net-phy-add-driver-for-MediaTek-2.5G-PHY.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 128dc09b0af36772062142ce9e85b19c84ac789a Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Tue, 28 Feb 2023 17:53:37 +0000 -Subject: [PATCH] net: phy: add driver for MediaTek 2.5G PHY - -Signed-off-by: Daniel Golle ---- - drivers/net/phy/Kconfig | 7 ++ - drivers/net/phy/Makefile | 1 + - drivers/net/phy/mediatek-2p5ge.c | 220 +++++++++++++++++++++++++++++++ - 3 files changed, 226 insertions(+) - create mode 100644 drivers/net/phy/mediatek-2p5ge.c - ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -326,6 +326,13 @@ config MEDIATEK_GE_SOC_PHY - present in the SoCs efuse and will dynamically calibrate VCM - (common-mode voltage) during startup. - -+config MEDIATEK_2P5G_PHY -+ tristate "MediaTek 2.5G Ethernet PHY" -+ depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST -+ default NET_MEDIATEK_SOC -+ help -+ Supports the MediaTek 2.5G Ethernet PHY. -+ - config MICREL_PHY - tristate "Micrel PHYs" - depends on PTP_1588_CLOCK_OPTIONAL ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -79,6 +79,7 @@ obj-$(CONFIG_MARVELL_10G_PHY) += marvell - obj-$(CONFIG_MARVELL_PHY) += marvell.o - obj-$(CONFIG_MARVELL_88X2222_PHY) += marvell-88x2222.o - obj-$(CONFIG_MAXLINEAR_GPHY) += mxl-gpy.o -+obj-$(CONFIG_MEDIATEK_2P5G_PHY) += mediatek-2p5ge.o - obj-$(CONFIG_MEDIATEK_GE_PHY) += mediatek-ge.o - obj-$(CONFIG_MEDIATEK_GE_SOC_PHY) += mediatek-ge-soc.o - obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o diff --git a/target/linux/mediatek/patches-6.1/734-v6.8-net-phy-mediatek-ge-soc-sync-driver-with-MediaTek-SD.patch b/target/linux/mediatek/patches-6.1/734-v6.8-net-phy-mediatek-ge-soc-sync-driver-with-MediaTek-SD.patch deleted file mode 100644 index 5daa62b6b79..00000000000 --- a/target/linux/mediatek/patches-6.1/734-v6.8-net-phy-mediatek-ge-soc-sync-driver-with-MediaTek-SD.patch +++ /dev/null @@ -1,270 +0,0 @@ -From f2195279c234c0f618946424b8236026126bc595 Mon Sep 17 00:00:00 2001 -Message-ID: -From: Daniel Golle -Date: Wed, 24 Jan 2024 02:27:04 +0000 -Subject: [PATCH net] net: phy: mediatek-ge-soc: sync driver with MediaTek SDK -To: Daniel Golle , - Qingfang Deng , - SkyLake Huang , - Andrew Lunn , - Heiner Kallweit , - Russell King , - David S. Miller , - Eric Dumazet , - Jakub Kicinski , - Paolo Abeni , - Matthias Brugger , - AngeloGioacchino Del Regno , - netdev@vger.kernel.org, - linux-kernel@vger.kernel.org, - linux-arm-kernel@lists.infradead.org, - linux-mediatek@lists.infradead.org - -Sync initialization and calibration routines with MediaTek's reference -driver. Improves compliance and resolves link stability issues with -CH340 IoT devices connected to MT798x built-in PHYs. - -Fixes: 98c485eaf509 ("net: phy: add driver for MediaTek SoC built-in GE PHYs") -Signed-off-by: Daniel Golle ---- - drivers/net/phy/mediatek-ge-soc.c | 147 ++++++++++++++++-------------- - 1 file changed, 81 insertions(+), 66 deletions(-) - ---- a/drivers/net/phy/mediatek-ge-soc.c -+++ b/drivers/net/phy/mediatek-ge-soc.c -@@ -491,7 +491,7 @@ static int tx_r50_fill_result(struct phy - u16 reg, val; - - if (phydev->drv->phy_id == MTK_GPHY_ID_MT7988) -- bias = -2; -+ bias = -1; - - val = clamp_val(bias + tx_r50_cal_val, 0, 63); - -@@ -707,6 +707,11 @@ restore: - static void mt798x_phy_common_finetune(struct phy_device *phydev) - { - phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); -+ /* SlvDSPreadyTime = 24, MasDSPreadyTime = 24 */ -+ __phy_write(phydev, 0x11, 0xc71); -+ __phy_write(phydev, 0x12, 0xc); -+ __phy_write(phydev, 0x10, 0x8fae); -+ - /* EnabRandUpdTrig = 1 */ - __phy_write(phydev, 0x11, 0x2f00); - __phy_write(phydev, 0x12, 0xe); -@@ -717,15 +722,56 @@ static void mt798x_phy_common_finetune(s - __phy_write(phydev, 0x12, 0x0); - __phy_write(phydev, 0x10, 0x83aa); - -- /* TrFreeze = 0 */ -+ /* FfeUpdGainForce = 1(Enable), FfeUpdGainForceVal = 4 */ -+ __phy_write(phydev, 0x11, 0x240); -+ __phy_write(phydev, 0x12, 0x0); -+ __phy_write(phydev, 0x10, 0x9680); -+ -+ /* TrFreeze = 0 (mt7988 default) */ - __phy_write(phydev, 0x11, 0x0); - __phy_write(phydev, 0x12, 0x0); - __phy_write(phydev, 0x10, 0x9686); - -+ /* SSTrKp100 = 5 */ -+ /* SSTrKf100 = 6 */ -+ /* SSTrKp1000Mas = 5 */ -+ /* SSTrKf1000Mas = 6 */ - /* SSTrKp1000Slv = 5 */ -+ /* SSTrKf1000Slv = 6 */ - __phy_write(phydev, 0x11, 0xbaef); - __phy_write(phydev, 0x12, 0x2e); - __phy_write(phydev, 0x10, 0x968c); -+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); -+} -+ -+static void mt7981_phy_finetune(struct phy_device *phydev) -+{ -+ u16 val[8] = { 0x01ce, 0x01c1, -+ 0x020f, 0x0202, -+ 0x03d0, 0x03c0, -+ 0x0013, 0x0005 }; -+ int i, k; -+ -+ /* 100M eye finetune: -+ * Keep middle level of TX MLT3 shapper as default. -+ * Only change TX MLT3 overshoot level here. -+ */ -+ for (k = 0, i = 1; i < 12; i++) { -+ if (i % 3 == 0) -+ continue; -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[k++]); -+ } -+ -+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); -+ /* ResetSyncOffset = 6 */ -+ __phy_write(phydev, 0x11, 0x600); -+ __phy_write(phydev, 0x12, 0x0); -+ __phy_write(phydev, 0x10, 0x8fc0); -+ -+ /* VgaDecRate = 1 */ -+ __phy_write(phydev, 0x11, 0x4c2a); -+ __phy_write(phydev, 0x12, 0x3e); -+ __phy_write(phydev, 0x10, 0x8fa4); - - /* MrvlTrFix100Kp = 3, MrvlTrFix100Kf = 2, - * MrvlTrFix1000Kp = 3, MrvlTrFix1000Kf = 2 -@@ -740,7 +786,7 @@ static void mt798x_phy_common_finetune(s - __phy_write(phydev, 0x10, 0x8ec0); - phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); - -- /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 9*/ -+ /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 9 */ - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234, - MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK, - BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0x9)); -@@ -773,48 +819,6 @@ static void mt798x_phy_common_finetune(s - phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_OUTPUT_V, 0x2222); - } - --static void mt7981_phy_finetune(struct phy_device *phydev) --{ -- u16 val[8] = { 0x01ce, 0x01c1, -- 0x020f, 0x0202, -- 0x03d0, 0x03c0, -- 0x0013, 0x0005 }; -- int i, k; -- -- /* 100M eye finetune: -- * Keep middle level of TX MLT3 shapper as default. -- * Only change TX MLT3 overshoot level here. -- */ -- for (k = 0, i = 1; i < 12; i++) { -- if (i % 3 == 0) -- continue; -- phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[k++]); -- } -- -- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); -- /* SlvDSPreadyTime = 24, MasDSPreadyTime = 24 */ -- __phy_write(phydev, 0x11, 0xc71); -- __phy_write(phydev, 0x12, 0xc); -- __phy_write(phydev, 0x10, 0x8fae); -- -- /* ResetSyncOffset = 6 */ -- __phy_write(phydev, 0x11, 0x600); -- __phy_write(phydev, 0x12, 0x0); -- __phy_write(phydev, 0x10, 0x8fc0); -- -- /* VgaDecRate = 1 */ -- __phy_write(phydev, 0x11, 0x4c2a); -- __phy_write(phydev, 0x12, 0x3e); -- __phy_write(phydev, 0x10, 0x8fa4); -- -- /* FfeUpdGainForce = 4 */ -- __phy_write(phydev, 0x11, 0x240); -- __phy_write(phydev, 0x12, 0x0); -- __phy_write(phydev, 0x10, 0x9680); -- -- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); --} -- - static void mt7988_phy_finetune(struct phy_device *phydev) - { - u16 val[12] = { 0x0187, 0x01cd, 0x01c8, 0x0182, -@@ -829,17 +833,7 @@ static void mt7988_phy_finetune(struct p - /* TCT finetune */ - phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_TX_FILTER, 0x5); - -- /* Disable TX power saving */ -- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG7, -- MTK_PHY_DA_AD_BUF_BIAS_LP_MASK, 0x3 << 8); -- - phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); -- -- /* SlvDSPreadyTime = 24, MasDSPreadyTime = 12 */ -- __phy_write(phydev, 0x11, 0x671); -- __phy_write(phydev, 0x12, 0xc); -- __phy_write(phydev, 0x10, 0x8fae); -- - /* ResetSyncOffset = 5 */ - __phy_write(phydev, 0x11, 0x500); - __phy_write(phydev, 0x12, 0x0); -@@ -847,13 +841,27 @@ static void mt7988_phy_finetune(struct p - - /* VgaDecRate is 1 at default on mt7988 */ - -- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); -+ /* MrvlTrFix100Kp = 6, MrvlTrFix100Kf = 7, -+ * MrvlTrFix1000Kp = 6, MrvlTrFix1000Kf = 7 -+ */ -+ __phy_write(phydev, 0x11, 0xb90a); -+ __phy_write(phydev, 0x12, 0x6f); -+ __phy_write(phydev, 0x10, 0x8f82); -+ -+ /* RemAckCntLimitCtrl = 1 */ -+ __phy_write(phydev, 0x11, 0xfbba); -+ __phy_write(phydev, 0x12, 0xc3); -+ __phy_write(phydev, 0x10, 0x87f8); - -- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_2A30); -- /* TxClkOffset = 2 */ -- __phy_modify(phydev, MTK_PHY_ANARG_RG, MTK_PHY_TCLKOFFSET_MASK, -- FIELD_PREP(MTK_PHY_TCLKOFFSET_MASK, 0x2)); - phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); -+ -+ /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 10 */ -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234, -+ MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK, -+ BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0xa)); -+ -+ /* rg_tr_lpf_cnt_val = 1023 */ -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LPF_CNT_VAL, 0x3ff); - } - - static void mt798x_phy_eee(struct phy_device *phydev) -@@ -886,11 +894,11 @@ static void mt798x_phy_eee(struct phy_de - MTK_PHY_LPI_SLV_SEND_TX_EN, - FIELD_PREP(MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK, 0x120)); - -- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG239, -- MTK_PHY_LPI_SEND_LOC_TIMER_MASK | -- MTK_PHY_LPI_TXPCS_LOC_RCV, -- FIELD_PREP(MTK_PHY_LPI_SEND_LOC_TIMER_MASK, 0x117)); -+ /* Keep MTK_PHY_LPI_SEND_LOC_TIMER as 375 */ -+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG239, -+ MTK_PHY_LPI_TXPCS_LOC_RCV); - -+ /* This also fixes some IoT issues, such as CH340 */ - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2C7, - MTK_PHY_MAX_GAIN_MASK | MTK_PHY_MIN_GAIN_MASK, - FIELD_PREP(MTK_PHY_MAX_GAIN_MASK, 0x8) | -@@ -924,7 +932,7 @@ static void mt798x_phy_eee(struct phy_de - __phy_write(phydev, 0x12, 0x0); - __phy_write(phydev, 0x10, 0x9690); - -- /* REG_EEE_st2TrKf1000 = 3 */ -+ /* REG_EEE_st2TrKf1000 = 2 */ - __phy_write(phydev, 0x11, 0x114f); - __phy_write(phydev, 0x12, 0x2); - __phy_write(phydev, 0x10, 0x969a); -@@ -949,7 +957,7 @@ static void mt798x_phy_eee(struct phy_de - __phy_write(phydev, 0x12, 0x0); - __phy_write(phydev, 0x10, 0x96b8); - -- /* REGEEE_wake_slv_tr_wait_dfesigdet_en = 1 */ -+ /* REGEEE_wake_slv_tr_wait_dfesigdet_en = 0 */ - __phy_write(phydev, 0x11, 0x1463); - __phy_write(phydev, 0x12, 0x0); - __phy_write(phydev, 0x10, 0x96ca); -@@ -1461,6 +1469,13 @@ static int mt7988_phy_probe(struct phy_d - if (err) - return err; - -+ /* Disable TX power saving at probing to: -+ * 1. Meet common mode compliance test criteria -+ * 2. Make sure that TX-VCM calibration works fine -+ */ -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG7, -+ MTK_PHY_DA_AD_BUF_BIAS_LP_MASK, 0x3 << 8); -+ - return mt798x_phy_calibration(phydev); - } - diff --git a/target/linux/mediatek/patches-6.1/735-net-phy-add-Airoha-EN8801SC-PHY.patch b/target/linux/mediatek/patches-6.1/735-net-phy-add-Airoha-EN8801SC-PHY.patch deleted file mode 100644 index 51f2a197e9e..00000000000 --- a/target/linux/mediatek/patches-6.1/735-net-phy-add-Airoha-EN8801SC-PHY.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 5314e73cb941b47e6866b49b3b78c25e32d62df8 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Sat, 23 Mar 2024 20:21:14 +0100 -Subject: [PATCH] net: phy: add Airoha EN8801SC PHY - -Airoha EN8801SC Gigabit PHY is used on Edgecore EAP111, so include a -modified version of MTK SDK driver. - -Signed-off-by: Robert Marko ---- - drivers/net/phy/Kconfig | 5 +++++ - drivers/net/phy/Makefile | 1 + - 2 files changed, 6 insertions(+) - ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -143,6 +143,11 @@ endif # RTL8366_SMI - - comment "MII PHY device drivers" - -+config AIROHA_EN8801SC_PHY -+ tristate "Airoha EN8801SC Gigabit PHY" -+ help -+ Currently supports the Airoha EN8801SC PHY. -+ - config AIR_EN8811H_PHY - tristate "Airoha EN8811H 2.5 Gigabit PHY" - help ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -47,6 +47,7 @@ obj-y += $(sfp-obj-y) $(sfp-obj-m) - - obj-$(CONFIG_ADIN_PHY) += adin.o - obj-$(CONFIG_ADIN1100_PHY) += adin1100.o -+obj-$(CONFIG_AIROHA_EN8801SC_PHY) += en8801sc.o - obj-$(CONFIG_AIR_EN8811H_PHY) += air_en8811h.o - obj-$(CONFIG_AMD_PHY) += amd.o - obj-$(CONFIG_AQUANTIA_PHY) += aquantia/ diff --git a/target/linux/mediatek/patches-6.1/804-v6.2-pwm-add-mt7986-support.patch b/target/linux/mediatek/patches-6.1/804-v6.2-pwm-add-mt7986-support.patch deleted file mode 100644 index 0c73d520b46..00000000000 --- a/target/linux/mediatek/patches-6.1/804-v6.2-pwm-add-mt7986-support.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/pwm/pwm-mediatek.c -+++ b/drivers/pwm/pwm-mediatek.c -@@ -329,6 +329,12 @@ static const struct pwm_mediatek_of_data - .has_ck_26m_sel = true, - }; - -+static const struct pwm_mediatek_of_data mt7986_pwm_data = { -+ .num_pwms = 2, -+ .pwm45_fixup = false, -+ .has_ck_26m_sel = true, -+}; -+ - static const struct pwm_mediatek_of_data mt8516_pwm_data = { - .num_pwms = 5, - .pwm45_fixup = false, -@@ -342,6 +348,7 @@ static const struct of_device_id pwm_med - { .compatible = "mediatek,mt7623-pwm", .data = &mt7623_pwm_data }, - { .compatible = "mediatek,mt7628-pwm", .data = &mt7628_pwm_data }, - { .compatible = "mediatek,mt7629-pwm", .data = &mt7629_pwm_data }, -+ { .compatible = "mediatek,mt7986-pwm", .data = &mt7986_pwm_data }, - { .compatible = "mediatek,mt8183-pwm", .data = &mt8183_pwm_data }, - { .compatible = "mediatek,mt8365-pwm", .data = &mt8365_pwm_data }, - { .compatible = "mediatek,mt8516-pwm", .data = &mt8516_pwm_data }, diff --git a/target/linux/mediatek/patches-6.1/805-v6.5-pwm-mediatek-Add-support-for-MT7981.patch b/target/linux/mediatek/patches-6.1/805-v6.5-pwm-mediatek-Add-support-for-MT7981.patch deleted file mode 100644 index 72feecadb1f..00000000000 --- a/target/linux/mediatek/patches-6.1/805-v6.5-pwm-mediatek-Add-support-for-MT7981.patch +++ /dev/null @@ -1,147 +0,0 @@ -From 967da67a745fb73fd0fc7aa61fd197b76fceb273 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Fri, 21 Apr 2023 00:23:21 +0100 -Subject: [PATCH] pwm: mediatek: Add support for MT7981 - -The PWM unit on MT7981 uses different register offsets than previous -MediaTek PWM units. Add support for these new offsets and add support -for PWM on MT7981 which has 3 PWM channels, one of them is typically -used for a temperature controlled fan. -While at it, also reorder pwm_mediatek_of_data entries to restore -alphabetic order. - -Signed-off-by: Daniel Golle -Reviewed-by: AngeloGioacchino Del Regno -Reviewed-by: Matthias Brugger -Signed-off-by: Thierry Reding ---- - drivers/pwm/pwm-mediatek.c | 39 ++++++++++++++++++++++++++++++-------- - 1 file changed, 31 insertions(+), 8 deletions(-) - ---- a/drivers/pwm/pwm-mediatek.c -+++ b/drivers/pwm/pwm-mediatek.c -@@ -38,6 +38,7 @@ struct pwm_mediatek_of_data { - unsigned int num_pwms; - bool pwm45_fixup; - bool has_ck_26m_sel; -+ const unsigned int *reg_offset; - }; - - /** -@@ -59,10 +60,14 @@ struct pwm_mediatek_chip { - const struct pwm_mediatek_of_data *soc; - }; - --static const unsigned int pwm_mediatek_reg_offset[] = { -+static const unsigned int mtk_pwm_reg_offset_v1[] = { - 0x0010, 0x0050, 0x0090, 0x00d0, 0x0110, 0x0150, 0x0190, 0x0220 - }; - -+static const unsigned int mtk_pwm_reg_offset_v2[] = { -+ 0x0080, 0x00c0, 0x0100, 0x0140, 0x0180, 0x01c0, 0x0200, 0x0240 -+}; -+ - static inline struct pwm_mediatek_chip * - to_pwm_mediatek_chip(struct pwm_chip *chip) - { -@@ -111,7 +116,7 @@ static inline void pwm_mediatek_writel(s - unsigned int num, unsigned int offset, - u32 value) - { -- writel(value, chip->regs + pwm_mediatek_reg_offset[num] + offset); -+ writel(value, chip->regs + chip->soc->reg_offset[num] + offset); - } - - static int pwm_mediatek_config(struct pwm_chip *chip, struct pwm_device *pwm, -@@ -285,60 +290,77 @@ static const struct pwm_mediatek_of_data - .num_pwms = 8, - .pwm45_fixup = false, - .has_ck_26m_sel = false, -+ .reg_offset = mtk_pwm_reg_offset_v1, - }; - - static const struct pwm_mediatek_of_data mt6795_pwm_data = { - .num_pwms = 7, - .pwm45_fixup = false, - .has_ck_26m_sel = false, -+ .reg_offset = mtk_pwm_reg_offset_v1, - }; - - static const struct pwm_mediatek_of_data mt7622_pwm_data = { - .num_pwms = 6, - .pwm45_fixup = false, - .has_ck_26m_sel = true, -+ .reg_offset = mtk_pwm_reg_offset_v1, - }; - - static const struct pwm_mediatek_of_data mt7623_pwm_data = { - .num_pwms = 5, - .pwm45_fixup = true, - .has_ck_26m_sel = false, -+ .reg_offset = mtk_pwm_reg_offset_v1, - }; - - static const struct pwm_mediatek_of_data mt7628_pwm_data = { - .num_pwms = 4, - .pwm45_fixup = true, - .has_ck_26m_sel = false, -+ .reg_offset = mtk_pwm_reg_offset_v1, - }; - - static const struct pwm_mediatek_of_data mt7629_pwm_data = { - .num_pwms = 1, - .pwm45_fixup = false, - .has_ck_26m_sel = false, -+ .reg_offset = mtk_pwm_reg_offset_v1, - }; - --static const struct pwm_mediatek_of_data mt8183_pwm_data = { -- .num_pwms = 4, -+static const struct pwm_mediatek_of_data mt7981_pwm_data = { -+ .num_pwms = 3, - .pwm45_fixup = false, - .has_ck_26m_sel = true, -+ .reg_offset = mtk_pwm_reg_offset_v2, - }; - --static const struct pwm_mediatek_of_data mt8365_pwm_data = { -- .num_pwms = 3, -+static const struct pwm_mediatek_of_data mt7986_pwm_data = { -+ .num_pwms = 2, - .pwm45_fixup = false, - .has_ck_26m_sel = true, -+ .reg_offset = mtk_pwm_reg_offset_v1, - }; - --static const struct pwm_mediatek_of_data mt7986_pwm_data = { -- .num_pwms = 2, -+static const struct pwm_mediatek_of_data mt8183_pwm_data = { -+ .num_pwms = 4, -+ .pwm45_fixup = false, -+ .has_ck_26m_sel = true, -+ .reg_offset = mtk_pwm_reg_offset_v1, -+}; -+ -+static const struct pwm_mediatek_of_data mt8365_pwm_data = { -+ .num_pwms = 3, - .pwm45_fixup = false, - .has_ck_26m_sel = true, -+ .reg_offset = mtk_pwm_reg_offset_v1, - }; - - static const struct pwm_mediatek_of_data mt8516_pwm_data = { - .num_pwms = 5, - .pwm45_fixup = false, - .has_ck_26m_sel = true, -+ .reg_offset = mtk_pwm_reg_offset_v1, - }; - - static const struct of_device_id pwm_mediatek_of_match[] = { -@@ -348,6 +370,7 @@ static const struct of_device_id pwm_med - { .compatible = "mediatek,mt7623-pwm", .data = &mt7623_pwm_data }, - { .compatible = "mediatek,mt7628-pwm", .data = &mt7628_pwm_data }, - { .compatible = "mediatek,mt7629-pwm", .data = &mt7629_pwm_data }, -+ { .compatible = "mediatek,mt7981-pwm", .data = &mt7981_pwm_data }, - { .compatible = "mediatek,mt7986-pwm", .data = &mt7986_pwm_data }, - { .compatible = "mediatek,mt8183-pwm", .data = &mt8183_pwm_data }, - { .compatible = "mediatek,mt8365-pwm", .data = &mt8365_pwm_data }, diff --git a/target/linux/mediatek/patches-6.1/806-v6.9-pwm-mediatek-add-support-for-MT7988.patch b/target/linux/mediatek/patches-6.1/806-v6.9-pwm-mediatek-add-support-for-MT7988.patch deleted file mode 100644 index 00543a1bb19..00000000000 --- a/target/linux/mediatek/patches-6.1/806-v6.9-pwm-mediatek-add-support-for-MT7988.patch +++ /dev/null @@ -1,44 +0,0 @@ -From eb58bf4afd708eb3c64c7b9b2c5fbfacdcdee3e5 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Wed, 14 Feb 2024 15:04:54 +0100 -Subject: [PATCH] pwm: mediatek: add support for MT7988 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -MT7988 uses new registers layout just like MT7981 but it supports 8 PWM -interfaces. - -Signed-off-by: RafaÅ‚ MiÅ‚ecki -Reviewed-by: Daniel Golle -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20240214140454.6438-2-zajec5@gmail.com -Signed-off-by: Uwe Kleine-König ---- - drivers/pwm/pwm-mediatek.c | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/drivers/pwm/pwm-mediatek.c -+++ b/drivers/pwm/pwm-mediatek.c -@@ -342,6 +342,13 @@ static const struct pwm_mediatek_of_data - .reg_offset = mtk_pwm_reg_offset_v1, - }; - -+static const struct pwm_mediatek_of_data mt7988_pwm_data = { -+ .num_pwms = 8, -+ .pwm45_fixup = false, -+ .has_ck_26m_sel = false, -+ .reg_offset = mtk_pwm_reg_offset_v2, -+}; -+ - static const struct pwm_mediatek_of_data mt8183_pwm_data = { - .num_pwms = 4, - .pwm45_fixup = false, -@@ -372,6 +379,7 @@ static const struct of_device_id pwm_med - { .compatible = "mediatek,mt7629-pwm", .data = &mt7629_pwm_data }, - { .compatible = "mediatek,mt7981-pwm", .data = &mt7981_pwm_data }, - { .compatible = "mediatek,mt7986-pwm", .data = &mt7986_pwm_data }, -+ { .compatible = "mediatek,mt7988-pwm", .data = &mt7988_pwm_data }, - { .compatible = "mediatek,mt8183-pwm", .data = &mt8183_pwm_data }, - { .compatible = "mediatek,mt8365-pwm", .data = &mt8365_pwm_data }, - { .compatible = "mediatek,mt8516-pwm", .data = &mt8516_pwm_data }, diff --git a/target/linux/mediatek/patches-6.1/826-v6.2-pinctrl-mediatek-extend-pinctrl-moore-to-support-new.patch b/target/linux/mediatek/patches-6.1/826-v6.2-pinctrl-mediatek-extend-pinctrl-moore-to-support-new.patch deleted file mode 100644 index f130fdbc566..00000000000 --- a/target/linux/mediatek/patches-6.1/826-v6.2-pinctrl-mediatek-extend-pinctrl-moore-to-support-new.patch +++ /dev/null @@ -1,129 +0,0 @@ -From fae82621ac33e2a4a96220c56e90d1ec6237d394 Mon Sep 17 00:00:00 2001 -From: Sam Shih -Date: Sun, 6 Nov 2022 09:01:12 +0100 -Subject: [PATCH] pinctrl: mediatek: extend pinctrl-moore to support new bias - functions - -Commit fb34a9ae383a ("pinctrl: mediatek: support rsel feature") -introduced SoC specify 'pull_type' attribute to mtk_pinconf_bias_set_combo -and mtk_pinconf_bias_get_combo, and make the functions able to support -almost all Mediatek SoCs that use pinctrl-mtk-common-v2.c. - -This patch enables pinctrl_moore to support these functions. - -Signed-off-by: Sam Shih -Signed-off-by: Frank Wunderlich -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20221106080114.7426-6-linux@fw-web.de -Signed-off-by: Linus Walleij ---- - drivers/pinctrl/mediatek/pinctrl-moore.c | 49 ++++++++++++++++++++---- - 1 file changed, 42 insertions(+), 7 deletions(-) - ---- a/drivers/pinctrl/mediatek/pinctrl-moore.c -+++ b/drivers/pinctrl/mediatek/pinctrl-moore.c -@@ -8,6 +8,7 @@ - * - */ - -+#include - #include - #include "pinctrl-moore.h" - -@@ -105,7 +106,7 @@ static int mtk_pinconf_get(struct pinctr - { - struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev); - u32 param = pinconf_to_config_param(*config); -- int val, val2, err, reg, ret = 1; -+ int val, val2, err, pullup, reg, ret = 1; - const struct mtk_pin_desc *desc; - - desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin]; -@@ -114,7 +115,13 @@ static int mtk_pinconf_get(struct pinctr - - switch (param) { - case PIN_CONFIG_BIAS_DISABLE: -- if (hw->soc->bias_disable_get) { -+ if (hw->soc->bias_get_combo) { -+ err = hw->soc->bias_get_combo(hw, desc, &pullup, &ret); -+ if (err) -+ return err; -+ if (ret != MTK_PUPD_SET_R1R0_00 && ret != MTK_DISABLE) -+ return -EINVAL; -+ } else if (hw->soc->bias_disable_get) { - err = hw->soc->bias_disable_get(hw, desc, &ret); - if (err) - return err; -@@ -123,7 +130,15 @@ static int mtk_pinconf_get(struct pinctr - } - break; - case PIN_CONFIG_BIAS_PULL_UP: -- if (hw->soc->bias_get) { -+ if (hw->soc->bias_get_combo) { -+ err = hw->soc->bias_get_combo(hw, desc, &pullup, &ret); -+ if (err) -+ return err; -+ if (ret == MTK_PUPD_SET_R1R0_00 || ret == MTK_DISABLE) -+ return -EINVAL; -+ if (!pullup) -+ return -EINVAL; -+ } else if (hw->soc->bias_get) { - err = hw->soc->bias_get(hw, desc, 1, &ret); - if (err) - return err; -@@ -132,7 +147,15 @@ static int mtk_pinconf_get(struct pinctr - } - break; - case PIN_CONFIG_BIAS_PULL_DOWN: -- if (hw->soc->bias_get) { -+ if (hw->soc->bias_get_combo) { -+ err = hw->soc->bias_get_combo(hw, desc, &pullup, &ret); -+ if (err) -+ return err; -+ if (ret == MTK_PUPD_SET_R1R0_00 || ret == MTK_DISABLE) -+ return -EINVAL; -+ if (pullup) -+ return -EINVAL; -+ } else if (hw->soc->bias_get) { - err = hw->soc->bias_get(hw, desc, 0, &ret); - if (err) - return err; -@@ -235,7 +258,11 @@ static int mtk_pinconf_set(struct pinctr - - switch (param) { - case PIN_CONFIG_BIAS_DISABLE: -- if (hw->soc->bias_disable_set) { -+ if (hw->soc->bias_set_combo) { -+ err = hw->soc->bias_set_combo(hw, desc, 0, MTK_DISABLE); -+ if (err) -+ return err; -+ } else if (hw->soc->bias_disable_set) { - err = hw->soc->bias_disable_set(hw, desc); - if (err) - return err; -@@ -244,7 +271,11 @@ static int mtk_pinconf_set(struct pinctr - } - break; - case PIN_CONFIG_BIAS_PULL_UP: -- if (hw->soc->bias_set) { -+ if (hw->soc->bias_set_combo) { -+ err = hw->soc->bias_set_combo(hw, desc, 1, arg); -+ if (err) -+ return err; -+ } else if (hw->soc->bias_set) { - err = hw->soc->bias_set(hw, desc, 1); - if (err) - return err; -@@ -253,7 +284,11 @@ static int mtk_pinconf_set(struct pinctr - } - break; - case PIN_CONFIG_BIAS_PULL_DOWN: -- if (hw->soc->bias_set) { -+ if (hw->soc->bias_set_combo) { -+ err = hw->soc->bias_set_combo(hw, desc, 0, arg); -+ if (err) -+ return err; -+ } else if (hw->soc->bias_set) { - err = hw->soc->bias_set(hw, desc, 0); - if (err) - return err; diff --git a/target/linux/mediatek/patches-6.1/830-v6.3-01-thermal-drivers-mtk_thermal-Fix-kernel-doc-function-.patch b/target/linux/mediatek/patches-6.1/830-v6.3-01-thermal-drivers-mtk_thermal-Fix-kernel-doc-function-.patch deleted file mode 100644 index 694b73a2b1c..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.3-01-thermal-drivers-mtk_thermal-Fix-kernel-doc-function-.patch +++ /dev/null @@ -1,37 +0,0 @@ -From f167da186acf90847e1a6d3716e253825a6218ec Mon Sep 17 00:00:00 2001 -From: Randy Dunlap -Date: Thu, 12 Jan 2023 22:44:49 -0800 -Subject: [PATCH 01/42] thermal/drivers/mtk_thermal: Fix kernel-doc function - name - -Use the correct function name in a kernel-doc comment to prevent -a warning: - -drivers/thermal/mtk_thermal.c:562: warning: expecting prototype for raw_to_mcelsius(). Prototype was for raw_to_mcelsius_v1() instead - -Signed-off-by: Randy Dunlap -Cc: "Rafael J. Wysocki" -Cc: Daniel Lezcano -Cc: Amit Kucheria -Cc: Zhang Rui -Cc: Matthias Brugger -Cc: linux-pm@vger.kernel.org -Cc: linux-arm-kernel@lists.infradead.org -Cc: linux-mediatek@lists.infradead.org -Link: https://lore.kernel.org/r/20230113064449.15061-1-rdunlap@infradead.org -Signed-off-by: Daniel Lezcano ---- - drivers/thermal/mtk_thermal.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/thermal/mtk_thermal.c -+++ b/drivers/thermal/mtk_thermal.c -@@ -550,7 +550,7 @@ static const struct mtk_thermal_data mt8 - }; - - /** -- * raw_to_mcelsius - convert a raw ADC value to mcelsius -+ * raw_to_mcelsius_v1 - convert a raw ADC value to mcelsius - * @mt: The thermal controller - * @sensno: sensor number - * @raw: raw ADC value diff --git a/target/linux/mediatek/patches-6.1/830-v6.3-02-thermal-drivers-mtk_thermal-Use-devm_platform_get_an.patch b/target/linux/mediatek/patches-6.1/830-v6.3-02-thermal-drivers-mtk_thermal-Use-devm_platform_get_an.patch deleted file mode 100644 index aaed9d7e90c..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.3-02-thermal-drivers-mtk_thermal-Use-devm_platform_get_an.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 255509232417ee71fd606cb957d44cf6544f0c43 Mon Sep 17 00:00:00 2001 -From: ye xingchen -Date: Wed, 18 Jan 2023 16:37:47 +0800 -Subject: [PATCH 02/42] thermal/drivers/mtk_thermal: Use - devm_platform_get_and_ioremap_resource() - -Convert platform_get_resource(), devm_ioremap_resource() to a single -call to devm_platform_get_and_ioremap_resource(), as this is exactly -what this function does. - -Signed-off-by: ye xingchen -Link: https://lore.kernel.org/r/202301181637472073620@zte.com.cn -Signed-off-by: Daniel Lezcano ---- - drivers/thermal/mtk_thermal.c | 4 +--- - 1 file changed, 1 insertion(+), 3 deletions(-) - ---- a/drivers/thermal/mtk_thermal.c -+++ b/drivers/thermal/mtk_thermal.c -@@ -990,7 +990,6 @@ static int mtk_thermal_probe(struct plat - int ret, i, ctrl_id; - struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node; - struct mtk_thermal *mt; -- struct resource *res; - u64 auxadc_phys_base, apmixed_phys_base; - struct thermal_zone_device *tzdev; - void __iomem *apmixed_base, *auxadc_base; -@@ -1009,8 +1008,7 @@ static int mtk_thermal_probe(struct plat - if (IS_ERR(mt->clk_auxadc)) - return PTR_ERR(mt->clk_auxadc); - -- res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- mt->thermal_base = devm_ioremap_resource(&pdev->dev, res); -+ mt->thermal_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); - if (IS_ERR(mt->thermal_base)) - return PTR_ERR(mt->thermal_base); - diff --git a/target/linux/mediatek/patches-6.1/830-v6.3-03-thermal-drivers-mtk-Use-function-pointer-for-raw_to_.patch b/target/linux/mediatek/patches-6.1/830-v6.3-03-thermal-drivers-mtk-Use-function-pointer-for-raw_to_.patch deleted file mode 100644 index 215b0fd7dec..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.3-03-thermal-drivers-mtk-Use-function-pointer-for-raw_to_.patch +++ /dev/null @@ -1,60 +0,0 @@ -From ca86dbd309ba03bef38ae91f037e2030bb671ab7 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Wed, 18 Jan 2023 15:40:39 +0000 -Subject: [PATCH 03/42] thermal/drivers/mtk: Use function pointer for - raw_to_mcelsius - -Instead of having if-else logic selecting either raw_to_mcelsius_v1 or -raw_to_mcelsius_v2 in mtk_thermal_bank_temperature introduce a function -pointer raw_to_mcelsius to struct mtk_thermal which is initialized in the -probe function. - -Reviewed-by: AngeloGioacchino Del Regno -Signed-off-by: Daniel Golle -Reviewed-by: Matthias Brugger -Link: https://lore.kernel.org/r/69c17529e8418da3eec703dde31e1b01e5b0f7e8.1674055882.git.daniel@makrotopia.org -Signed-off-by: Daniel Lezcano ---- - drivers/thermal/mtk_thermal.c | 17 ++++++++++------- - 1 file changed, 10 insertions(+), 7 deletions(-) - ---- a/drivers/thermal/mtk_thermal.c -+++ b/drivers/thermal/mtk_thermal.c -@@ -292,6 +292,8 @@ struct mtk_thermal { - - const struct mtk_thermal_data *conf; - struct mtk_thermal_bank banks[MAX_NUM_ZONES]; -+ -+ int (*raw_to_mcelsius)(struct mtk_thermal *mt, int sensno, s32 raw); - }; - - /* MT8183 thermal sensor data */ -@@ -656,13 +658,9 @@ static int mtk_thermal_bank_temperature( - for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) { - raw = readl(mt->thermal_base + conf->msr[i]); - -- if (mt->conf->version == MTK_THERMAL_V1) { -- temp = raw_to_mcelsius_v1( -- mt, conf->bank_data[bank->id].sensors[i], raw); -- } else { -- temp = raw_to_mcelsius_v2( -- mt, conf->bank_data[bank->id].sensors[i], raw); -- } -+ temp = mt->raw_to_mcelsius( -+ mt, conf->bank_data[bank->id].sensors[i], raw); -+ - - /* - * The first read of a sensor often contains very high bogus -@@ -1073,6 +1071,11 @@ static int mtk_thermal_probe(struct plat - mtk_thermal_release_periodic_ts(mt, auxadc_base); - } - -+ if (mt->conf->version == MTK_THERMAL_V1) -+ mt->raw_to_mcelsius = raw_to_mcelsius_v1; -+ else -+ mt->raw_to_mcelsius = raw_to_mcelsius_v2; -+ - for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++) - for (i = 0; i < mt->conf->num_banks; i++) - mtk_thermal_init_bank(mt, i, apmixed_phys_base, diff --git a/target/linux/mediatek/patches-6.1/830-v6.3-04-thermal-drivers-mtk-Add-support-for-MT7986-and-MT798.patch b/target/linux/mediatek/patches-6.1/830-v6.3-04-thermal-drivers-mtk-Add-support-for-MT7986-and-MT798.patch deleted file mode 100644 index ef2006775a3..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.3-04-thermal-drivers-mtk-Add-support-for-MT7986-and-MT798.patch +++ /dev/null @@ -1,236 +0,0 @@ -From aec1d89dccc7cba04fdb3e52dfda328f3302ba17 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Wed, 18 Jan 2023 15:40:58 +0000 -Subject: [PATCH 04/42] thermal/drivers/mtk: Add support for MT7986 and MT7981 - -Add support for V3 generation thermal found in MT7986 and MT7981 SoCs. -Brings code to assign values from efuse as well as new function to -convert raw temperature to millidegree celsius, as found in MediaTek's -SDK sources (but cleaned up and de-duplicated) - -[1]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/baf36c7eef477aae1f8f2653b6c29e2caf48475b - -Signed-off-by: Daniel Golle -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/2d341fc45266217249586eb4bd3be3ac4ca83a12.1674055882.git.daniel@makrotopia.org -Signed-off-by: Daniel Lezcano ---- - drivers/thermal/mtk_thermal.c | 128 ++++++++++++++++++++++++++++++++-- - 1 file changed, 124 insertions(+), 4 deletions(-) - ---- a/drivers/thermal/mtk_thermal.c -+++ b/drivers/thermal/mtk_thermal.c -@@ -150,6 +150,20 @@ - #define CALIB_BUF1_VALID_V2(x) (((x) >> 4) & 0x1) - #define CALIB_BUF1_O_SLOPE_SIGN_V2(x) (((x) >> 3) & 0x1) - -+/* -+ * Layout of the fuses providing the calibration data -+ * These macros can be used for MT7981 and MT7986. -+ */ -+#define CALIB_BUF0_ADC_GE_V3(x) (((x) >> 0) & 0x3ff) -+#define CALIB_BUF0_DEGC_CALI_V3(x) (((x) >> 20) & 0x3f) -+#define CALIB_BUF0_O_SLOPE_V3(x) (((x) >> 26) & 0x3f) -+#define CALIB_BUF1_VTS_TS1_V3(x) (((x) >> 0) & 0x1ff) -+#define CALIB_BUF1_VTS_TS2_V3(x) (((x) >> 21) & 0x1ff) -+#define CALIB_BUF1_VTS_TSABB_V3(x) (((x) >> 9) & 0x1ff) -+#define CALIB_BUF1_VALID_V3(x) (((x) >> 18) & 0x1) -+#define CALIB_BUF1_O_SLOPE_SIGN_V3(x) (((x) >> 19) & 0x1) -+#define CALIB_BUF1_ID_V3(x) (((x) >> 20) & 0x1) -+ - enum { - VTS1, - VTS2, -@@ -163,6 +177,7 @@ enum { - enum mtk_thermal_version { - MTK_THERMAL_V1 = 1, - MTK_THERMAL_V2, -+ MTK_THERMAL_V3, - }; - - /* MT2701 thermal sensors */ -@@ -245,6 +260,27 @@ enum mtk_thermal_version { - /* The calibration coefficient of sensor */ - #define MT8183_CALIBRATION 153 - -+/* AUXADC channel 11 is used for the temperature sensors */ -+#define MT7986_TEMP_AUXADC_CHANNEL 11 -+ -+/* The total number of temperature sensors in the MT7986 */ -+#define MT7986_NUM_SENSORS 1 -+ -+/* The number of banks in the MT7986 */ -+#define MT7986_NUM_ZONES 1 -+ -+/* The number of sensing points per bank */ -+#define MT7986_NUM_SENSORS_PER_ZONE 1 -+ -+/* MT7986 thermal sensors */ -+#define MT7986_TS1 0 -+ -+/* The number of controller in the MT7986 */ -+#define MT7986_NUM_CONTROLLER 1 -+ -+/* The calibration coefficient of sensor */ -+#define MT7986_CALIBRATION 165 -+ - struct mtk_thermal; - - struct thermal_bank_cfg { -@@ -388,6 +424,14 @@ static const int mt7622_mux_values[MT762 - static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 }; - static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, }; - -+/* MT7986 thermal sensor data */ -+static const int mt7986_bank_data[MT7986_NUM_SENSORS] = { MT7986_TS1, }; -+static const int mt7986_msr[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, }; -+static const int mt7986_adcpnp[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, }; -+static const int mt7986_mux_values[MT7986_NUM_SENSORS] = { 0, }; -+static const int mt7986_vts_index[MT7986_NUM_SENSORS] = { VTS1 }; -+static const int mt7986_tc_offset[MT7986_NUM_CONTROLLER] = { 0x0, }; -+ - /* - * The MT8173 thermal controller has four banks. Each bank can read up to - * four temperature sensors simultaneously. The MT8173 has a total of 5 -@@ -551,6 +595,30 @@ static const struct mtk_thermal_data mt8 - .version = MTK_THERMAL_V1, - }; - -+/* -+ * MT7986 uses AUXADC Channel 11 for raw data access. -+ */ -+static const struct mtk_thermal_data mt7986_thermal_data = { -+ .auxadc_channel = MT7986_TEMP_AUXADC_CHANNEL, -+ .num_banks = MT7986_NUM_ZONES, -+ .num_sensors = MT7986_NUM_SENSORS, -+ .vts_index = mt7986_vts_index, -+ .cali_val = MT7986_CALIBRATION, -+ .num_controller = MT7986_NUM_CONTROLLER, -+ .controller_offset = mt7986_tc_offset, -+ .need_switch_bank = true, -+ .bank_data = { -+ { -+ .num_sensors = 1, -+ .sensors = mt7986_bank_data, -+ }, -+ }, -+ .msr = mt7986_msr, -+ .adcpnp = mt7986_adcpnp, -+ .sensor_mux_values = mt7986_mux_values, -+ .version = MTK_THERMAL_V3, -+}; -+ - /** - * raw_to_mcelsius_v1 - convert a raw ADC value to mcelsius - * @mt: The thermal controller -@@ -605,6 +673,22 @@ static int raw_to_mcelsius_v2(struct mtk - return (format_2 - tmp) * 100; - } - -+static int raw_to_mcelsius_v3(struct mtk_thermal *mt, int sensno, s32 raw) -+{ -+ s32 tmp; -+ -+ if (raw == 0) -+ return 0; -+ -+ raw &= 0xfff; -+ tmp = 100000 * 15 / 16 * 10000; -+ tmp /= 4096 - 512 + mt->adc_ge; -+ tmp /= 1490; -+ tmp *= raw - mt->vts[sensno] - 2900; -+ -+ return mt->degc_cali * 500 - tmp; -+} -+ - /** - * mtk_thermal_get_bank - get bank - * @bank: The bank -@@ -885,6 +969,25 @@ static int mtk_thermal_extract_efuse_v2( - return 0; - } - -+static int mtk_thermal_extract_efuse_v3(struct mtk_thermal *mt, u32 *buf) -+{ -+ if (!CALIB_BUF1_VALID_V3(buf[1])) -+ return -EINVAL; -+ -+ mt->adc_ge = CALIB_BUF0_ADC_GE_V3(buf[0]); -+ mt->degc_cali = CALIB_BUF0_DEGC_CALI_V3(buf[0]); -+ mt->o_slope = CALIB_BUF0_O_SLOPE_V3(buf[0]); -+ mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V3(buf[1]); -+ mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V3(buf[1]); -+ mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V3(buf[1]); -+ mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V3(buf[1]); -+ -+ if (CALIB_BUF1_ID_V3(buf[1]) == 0) -+ mt->o_slope = 0; -+ -+ return 0; -+} -+ - static int mtk_thermal_get_calibration_data(struct device *dev, - struct mtk_thermal *mt) - { -@@ -895,6 +998,7 @@ static int mtk_thermal_get_calibration_d - - /* Start with default values */ - mt->adc_ge = 512; -+ mt->adc_oe = 512; - for (i = 0; i < mt->conf->num_sensors; i++) - mt->vts[i] = 260; - mt->degc_cali = 40; -@@ -920,10 +1024,20 @@ static int mtk_thermal_get_calibration_d - goto out; - } - -- if (mt->conf->version == MTK_THERMAL_V1) -+ switch (mt->conf->version) { -+ case MTK_THERMAL_V1: - ret = mtk_thermal_extract_efuse_v1(mt, buf); -- else -+ break; -+ case MTK_THERMAL_V2: - ret = mtk_thermal_extract_efuse_v2(mt, buf); -+ break; -+ case MTK_THERMAL_V3: -+ ret = mtk_thermal_extract_efuse_v3(mt, buf); -+ break; -+ default: -+ ret = -EINVAL; -+ break; -+ } - - if (ret) { - dev_info(dev, "Device not calibrated, using default calibration values\n"); -@@ -954,6 +1068,10 @@ static const struct of_device_id mtk_the - .data = (void *)&mt7622_thermal_data, - }, - { -+ .compatible = "mediatek,mt7986-thermal", -+ .data = (void *)&mt7986_thermal_data, -+ }, -+ { - .compatible = "mediatek,mt8183-thermal", - .data = (void *)&mt8183_thermal_data, - }, { -@@ -1066,15 +1184,17 @@ static int mtk_thermal_probe(struct plat - goto err_disable_clk_auxadc; - } - -- if (mt->conf->version == MTK_THERMAL_V2) { -+ if (mt->conf->version != MTK_THERMAL_V1) { - mtk_thermal_turn_on_buffer(apmixed_base); - mtk_thermal_release_periodic_ts(mt, auxadc_base); - } - - if (mt->conf->version == MTK_THERMAL_V1) - mt->raw_to_mcelsius = raw_to_mcelsius_v1; -- else -+ else if (mt->conf->version == MTK_THERMAL_V2) - mt->raw_to_mcelsius = raw_to_mcelsius_v2; -+ else -+ mt->raw_to_mcelsius = raw_to_mcelsius_v3; - - for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++) - for (i = 0; i < mt->conf->num_banks; i++) diff --git a/target/linux/mediatek/patches-6.1/830-v6.3-05-thermal-drivers-mediatek-Relocate-driver-to-mediatek.patch b/target/linux/mediatek/patches-6.1/830-v6.3-05-thermal-drivers-mediatek-Relocate-driver-to-mediatek.patch deleted file mode 100644 index e102a338cdc..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.3-05-thermal-drivers-mediatek-Relocate-driver-to-mediatek.patch +++ /dev/null @@ -1,2602 +0,0 @@ -From 5e3aac197a74914ccec2732a89c29d960730d28f Mon Sep 17 00:00:00 2001 -From: Balsam CHIHI -Date: Thu, 9 Feb 2023 11:56:23 +0100 -Subject: [PATCH 05/42] thermal/drivers/mediatek: Relocate driver to mediatek - folder - -Add MediaTek proprietary folder to upstream more thermal zone and cooler -drivers, relocate the original thermal controller driver to it, and rename it -as "auxadc_thermal.c" to show its purpose more clearly. - -Signed-off-by: Balsam CHIHI -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20230209105628.50294-2-bchihi@baylibre.com -Signed-off-by: Daniel Lezcano -Signed-off-by: Rafael J. Wysocki ---- - drivers/thermal/Kconfig | 14 ++++--------- - drivers/thermal/Makefile | 2 +- - drivers/thermal/mediatek/Kconfig | 21 +++++++++++++++++++ - drivers/thermal/mediatek/Makefile | 1 + - .../auxadc_thermal.c} | 2 +- - 5 files changed, 28 insertions(+), 12 deletions(-) - create mode 100644 drivers/thermal/mediatek/Kconfig - create mode 100644 drivers/thermal/mediatek/Makefile - rename drivers/thermal/{mtk_thermal.c => mediatek/auxadc_thermal.c} (99%) - ---- a/drivers/thermal/Kconfig -+++ b/drivers/thermal/Kconfig -@@ -412,16 +412,10 @@ config DA9062_THERMAL - zone. - Compatible with the DA9062 and DA9061 PMICs. - --config MTK_THERMAL -- tristate "Temperature sensor driver for mediatek SoCs" -- depends on ARCH_MEDIATEK || COMPILE_TEST -- depends on HAS_IOMEM -- depends on NVMEM || NVMEM=n -- depends on RESET_CONTROLLER -- default y -- help -- Enable this option if you want to have support for thermal management -- controller present in Mediatek SoCs -+menu "Mediatek thermal drivers" -+depends on ARCH_MEDIATEK || COMPILE_TEST -+source "drivers/thermal/mediatek/Kconfig" -+endmenu - - config AMLOGIC_THERMAL - tristate "Amlogic Thermal Support" ---- a/drivers/thermal/Makefile -+++ b/drivers/thermal/Makefile -@@ -55,7 +55,7 @@ obj-y += st/ - obj-y += qcom/ - obj-y += tegra/ - obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o --obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o -+obj-y += mediatek/ - obj-$(CONFIG_GENERIC_ADC_THERMAL) += thermal-generic-adc.o - obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o - obj-$(CONFIG_AMLOGIC_THERMAL) += amlogic_thermal.o ---- /dev/null -+++ b/drivers/thermal/mediatek/Kconfig -@@ -0,0 +1,21 @@ -+config MTK_THERMAL -+ tristate "MediaTek thermal drivers" -+ depends on THERMAL_OF -+ help -+ This is the option for MediaTek thermal software solutions. -+ Please enable corresponding options to get temperature -+ information from thermal sensors or turn on throttle -+ mechaisms for thermal mitigation. -+ -+if MTK_THERMAL -+ -+config MTK_SOC_THERMAL -+ tristate "AUXADC temperature sensor driver for MediaTek SoCs" -+ depends on HAS_IOMEM -+ help -+ Enable this option if you want to get SoC temperature -+ information for MediaTek platforms. -+ This driver configures thermal controllers to collect -+ temperature via AUXADC interface. -+ -+endif ---- /dev/null -+++ b/drivers/thermal/mediatek/Makefile -@@ -0,0 +1 @@ -+obj-$(CONFIG_MTK_SOC_THERMAL) += auxadc_thermal.o ---- a/drivers/thermal/mtk_thermal.c -+++ /dev/null -@@ -1,1254 +0,0 @@ --// SPDX-License-Identifier: GPL-2.0-only --/* -- * Copyright (c) 2015 MediaTek Inc. -- * Author: Hanyi Wu -- * Sascha Hauer -- * Dawei Chien -- * Louis Yu -- */ -- --#include --#include --#include --#include --#include --#include --#include --#include --#include --#include --#include --#include --#include --#include --#include -- --#include "thermal_hwmon.h" -- --/* AUXADC Registers */ --#define AUXADC_CON1_SET_V 0x008 --#define AUXADC_CON1_CLR_V 0x00c --#define AUXADC_CON2_V 0x010 --#define AUXADC_DATA(channel) (0x14 + (channel) * 4) -- --#define APMIXED_SYS_TS_CON1 0x604 -- --/* Thermal Controller Registers */ --#define TEMP_MONCTL0 0x000 --#define TEMP_MONCTL1 0x004 --#define TEMP_MONCTL2 0x008 --#define TEMP_MONIDET0 0x014 --#define TEMP_MONIDET1 0x018 --#define TEMP_MSRCTL0 0x038 --#define TEMP_MSRCTL1 0x03c --#define TEMP_AHBPOLL 0x040 --#define TEMP_AHBTO 0x044 --#define TEMP_ADCPNP0 0x048 --#define TEMP_ADCPNP1 0x04c --#define TEMP_ADCPNP2 0x050 --#define TEMP_ADCPNP3 0x0b4 -- --#define TEMP_ADCMUX 0x054 --#define TEMP_ADCEN 0x060 --#define TEMP_PNPMUXADDR 0x064 --#define TEMP_ADCMUXADDR 0x068 --#define TEMP_ADCENADDR 0x074 --#define TEMP_ADCVALIDADDR 0x078 --#define TEMP_ADCVOLTADDR 0x07c --#define TEMP_RDCTRL 0x080 --#define TEMP_ADCVALIDMASK 0x084 --#define TEMP_ADCVOLTAGESHIFT 0x088 --#define TEMP_ADCWRITECTRL 0x08c --#define TEMP_MSR0 0x090 --#define TEMP_MSR1 0x094 --#define TEMP_MSR2 0x098 --#define TEMP_MSR3 0x0B8 -- --#define TEMP_SPARE0 0x0f0 -- --#define TEMP_ADCPNP0_1 0x148 --#define TEMP_ADCPNP1_1 0x14c --#define TEMP_ADCPNP2_1 0x150 --#define TEMP_MSR0_1 0x190 --#define TEMP_MSR1_1 0x194 --#define TEMP_MSR2_1 0x198 --#define TEMP_ADCPNP3_1 0x1b4 --#define TEMP_MSR3_1 0x1B8 -- --#define PTPCORESEL 0x400 -- --#define TEMP_MONCTL1_PERIOD_UNIT(x) ((x) & 0x3ff) -- --#define TEMP_MONCTL2_FILTER_INTERVAL(x) (((x) & 0x3ff) << 16) --#define TEMP_MONCTL2_SENSOR_INTERVAL(x) ((x) & 0x3ff) -- --#define TEMP_AHBPOLL_ADC_POLL_INTERVAL(x) (x) -- --#define TEMP_ADCWRITECTRL_ADC_PNP_WRITE BIT(0) --#define TEMP_ADCWRITECTRL_ADC_MUX_WRITE BIT(1) -- --#define TEMP_ADCVALIDMASK_VALID_HIGH BIT(5) --#define TEMP_ADCVALIDMASK_VALID_POS(bit) (bit) -- --/* MT8173 thermal sensors */ --#define MT8173_TS1 0 --#define MT8173_TS2 1 --#define MT8173_TS3 2 --#define MT8173_TS4 3 --#define MT8173_TSABB 4 -- --/* AUXADC channel 11 is used for the temperature sensors */ --#define MT8173_TEMP_AUXADC_CHANNEL 11 -- --/* The total number of temperature sensors in the MT8173 */ --#define MT8173_NUM_SENSORS 5 -- --/* The number of banks in the MT8173 */ --#define MT8173_NUM_ZONES 4 -- --/* The number of sensing points per bank */ --#define MT8173_NUM_SENSORS_PER_ZONE 4 -- --/* The number of controller in the MT8173 */ --#define MT8173_NUM_CONTROLLER 1 -- --/* The calibration coefficient of sensor */ --#define MT8173_CALIBRATION 165 -- --/* -- * Layout of the fuses providing the calibration data -- * These macros could be used for MT8183, MT8173, MT2701, and MT2712. -- * MT8183 has 6 sensors and needs 6 VTS calibration data. -- * MT8173 has 5 sensors and needs 5 VTS calibration data. -- * MT2701 has 3 sensors and needs 3 VTS calibration data. -- * MT2712 has 4 sensors and needs 4 VTS calibration data. -- */ --#define CALIB_BUF0_VALID_V1 BIT(0) --#define CALIB_BUF1_ADC_GE_V1(x) (((x) >> 22) & 0x3ff) --#define CALIB_BUF0_VTS_TS1_V1(x) (((x) >> 17) & 0x1ff) --#define CALIB_BUF0_VTS_TS2_V1(x) (((x) >> 8) & 0x1ff) --#define CALIB_BUF1_VTS_TS3_V1(x) (((x) >> 0) & 0x1ff) --#define CALIB_BUF2_VTS_TS4_V1(x) (((x) >> 23) & 0x1ff) --#define CALIB_BUF2_VTS_TS5_V1(x) (((x) >> 5) & 0x1ff) --#define CALIB_BUF2_VTS_TSABB_V1(x) (((x) >> 14) & 0x1ff) --#define CALIB_BUF0_DEGC_CALI_V1(x) (((x) >> 1) & 0x3f) --#define CALIB_BUF0_O_SLOPE_V1(x) (((x) >> 26) & 0x3f) --#define CALIB_BUF0_O_SLOPE_SIGN_V1(x) (((x) >> 7) & 0x1) --#define CALIB_BUF1_ID_V1(x) (((x) >> 9) & 0x1) -- --/* -- * Layout of the fuses providing the calibration data -- * These macros could be used for MT7622. -- */ --#define CALIB_BUF0_ADC_OE_V2(x) (((x) >> 22) & 0x3ff) --#define CALIB_BUF0_ADC_GE_V2(x) (((x) >> 12) & 0x3ff) --#define CALIB_BUF0_DEGC_CALI_V2(x) (((x) >> 6) & 0x3f) --#define CALIB_BUF0_O_SLOPE_V2(x) (((x) >> 0) & 0x3f) --#define CALIB_BUF1_VTS_TS1_V2(x) (((x) >> 23) & 0x1ff) --#define CALIB_BUF1_VTS_TS2_V2(x) (((x) >> 14) & 0x1ff) --#define CALIB_BUF1_VTS_TSABB_V2(x) (((x) >> 5) & 0x1ff) --#define CALIB_BUF1_VALID_V2(x) (((x) >> 4) & 0x1) --#define CALIB_BUF1_O_SLOPE_SIGN_V2(x) (((x) >> 3) & 0x1) -- --/* -- * Layout of the fuses providing the calibration data -- * These macros can be used for MT7981 and MT7986. -- */ --#define CALIB_BUF0_ADC_GE_V3(x) (((x) >> 0) & 0x3ff) --#define CALIB_BUF0_DEGC_CALI_V3(x) (((x) >> 20) & 0x3f) --#define CALIB_BUF0_O_SLOPE_V3(x) (((x) >> 26) & 0x3f) --#define CALIB_BUF1_VTS_TS1_V3(x) (((x) >> 0) & 0x1ff) --#define CALIB_BUF1_VTS_TS2_V3(x) (((x) >> 21) & 0x1ff) --#define CALIB_BUF1_VTS_TSABB_V3(x) (((x) >> 9) & 0x1ff) --#define CALIB_BUF1_VALID_V3(x) (((x) >> 18) & 0x1) --#define CALIB_BUF1_O_SLOPE_SIGN_V3(x) (((x) >> 19) & 0x1) --#define CALIB_BUF1_ID_V3(x) (((x) >> 20) & 0x1) -- --enum { -- VTS1, -- VTS2, -- VTS3, -- VTS4, -- VTS5, -- VTSABB, -- MAX_NUM_VTS, --}; -- --enum mtk_thermal_version { -- MTK_THERMAL_V1 = 1, -- MTK_THERMAL_V2, -- MTK_THERMAL_V3, --}; -- --/* MT2701 thermal sensors */ --#define MT2701_TS1 0 --#define MT2701_TS2 1 --#define MT2701_TSABB 2 -- --/* AUXADC channel 11 is used for the temperature sensors */ --#define MT2701_TEMP_AUXADC_CHANNEL 11 -- --/* The total number of temperature sensors in the MT2701 */ --#define MT2701_NUM_SENSORS 3 -- --/* The number of sensing points per bank */ --#define MT2701_NUM_SENSORS_PER_ZONE 3 -- --/* The number of controller in the MT2701 */ --#define MT2701_NUM_CONTROLLER 1 -- --/* The calibration coefficient of sensor */ --#define MT2701_CALIBRATION 165 -- --/* MT2712 thermal sensors */ --#define MT2712_TS1 0 --#define MT2712_TS2 1 --#define MT2712_TS3 2 --#define MT2712_TS4 3 -- --/* AUXADC channel 11 is used for the temperature sensors */ --#define MT2712_TEMP_AUXADC_CHANNEL 11 -- --/* The total number of temperature sensors in the MT2712 */ --#define MT2712_NUM_SENSORS 4 -- --/* The number of sensing points per bank */ --#define MT2712_NUM_SENSORS_PER_ZONE 4 -- --/* The number of controller in the MT2712 */ --#define MT2712_NUM_CONTROLLER 1 -- --/* The calibration coefficient of sensor */ --#define MT2712_CALIBRATION 165 -- --#define MT7622_TEMP_AUXADC_CHANNEL 11 --#define MT7622_NUM_SENSORS 1 --#define MT7622_NUM_ZONES 1 --#define MT7622_NUM_SENSORS_PER_ZONE 1 --#define MT7622_TS1 0 --#define MT7622_NUM_CONTROLLER 1 -- --/* The maximum number of banks */ --#define MAX_NUM_ZONES 8 -- --/* The calibration coefficient of sensor */ --#define MT7622_CALIBRATION 165 -- --/* MT8183 thermal sensors */ --#define MT8183_TS1 0 --#define MT8183_TS2 1 --#define MT8183_TS3 2 --#define MT8183_TS4 3 --#define MT8183_TS5 4 --#define MT8183_TSABB 5 -- --/* AUXADC channel is used for the temperature sensors */ --#define MT8183_TEMP_AUXADC_CHANNEL 11 -- --/* The total number of temperature sensors in the MT8183 */ --#define MT8183_NUM_SENSORS 6 -- --/* The number of banks in the MT8183 */ --#define MT8183_NUM_ZONES 1 -- --/* The number of sensing points per bank */ --#define MT8183_NUM_SENSORS_PER_ZONE 6 -- --/* The number of controller in the MT8183 */ --#define MT8183_NUM_CONTROLLER 2 -- --/* The calibration coefficient of sensor */ --#define MT8183_CALIBRATION 153 -- --/* AUXADC channel 11 is used for the temperature sensors */ --#define MT7986_TEMP_AUXADC_CHANNEL 11 -- --/* The total number of temperature sensors in the MT7986 */ --#define MT7986_NUM_SENSORS 1 -- --/* The number of banks in the MT7986 */ --#define MT7986_NUM_ZONES 1 -- --/* The number of sensing points per bank */ --#define MT7986_NUM_SENSORS_PER_ZONE 1 -- --/* MT7986 thermal sensors */ --#define MT7986_TS1 0 -- --/* The number of controller in the MT7986 */ --#define MT7986_NUM_CONTROLLER 1 -- --/* The calibration coefficient of sensor */ --#define MT7986_CALIBRATION 165 -- --struct mtk_thermal; -- --struct thermal_bank_cfg { -- unsigned int num_sensors; -- const int *sensors; --}; -- --struct mtk_thermal_bank { -- struct mtk_thermal *mt; -- int id; --}; -- --struct mtk_thermal_data { -- s32 num_banks; -- s32 num_sensors; -- s32 auxadc_channel; -- const int *vts_index; -- const int *sensor_mux_values; -- const int *msr; -- const int *adcpnp; -- const int cali_val; -- const int num_controller; -- const int *controller_offset; -- bool need_switch_bank; -- struct thermal_bank_cfg bank_data[MAX_NUM_ZONES]; -- enum mtk_thermal_version version; --}; -- --struct mtk_thermal { -- struct device *dev; -- void __iomem *thermal_base; -- -- struct clk *clk_peri_therm; -- struct clk *clk_auxadc; -- /* lock: for getting and putting banks */ -- struct mutex lock; -- -- /* Calibration values */ -- s32 adc_ge; -- s32 adc_oe; -- s32 degc_cali; -- s32 o_slope; -- s32 o_slope_sign; -- s32 vts[MAX_NUM_VTS]; -- -- const struct mtk_thermal_data *conf; -- struct mtk_thermal_bank banks[MAX_NUM_ZONES]; -- -- int (*raw_to_mcelsius)(struct mtk_thermal *mt, int sensno, s32 raw); --}; -- --/* MT8183 thermal sensor data */ --static const int mt8183_bank_data[MT8183_NUM_SENSORS] = { -- MT8183_TS1, MT8183_TS2, MT8183_TS3, MT8183_TS4, MT8183_TS5, MT8183_TSABB --}; -- --static const int mt8183_msr[MT8183_NUM_SENSORS_PER_ZONE] = { -- TEMP_MSR0_1, TEMP_MSR1_1, TEMP_MSR2_1, TEMP_MSR1, TEMP_MSR0, TEMP_MSR3_1 --}; -- --static const int mt8183_adcpnp[MT8183_NUM_SENSORS_PER_ZONE] = { -- TEMP_ADCPNP0_1, TEMP_ADCPNP1_1, TEMP_ADCPNP2_1, -- TEMP_ADCPNP1, TEMP_ADCPNP0, TEMP_ADCPNP3_1 --}; -- --static const int mt8183_mux_values[MT8183_NUM_SENSORS] = { 0, 1, 2, 3, 4, 0 }; --static const int mt8183_tc_offset[MT8183_NUM_CONTROLLER] = {0x0, 0x100}; -- --static const int mt8183_vts_index[MT8183_NUM_SENSORS] = { -- VTS1, VTS2, VTS3, VTS4, VTS5, VTSABB --}; -- --/* MT8173 thermal sensor data */ --static const int mt8173_bank_data[MT8173_NUM_ZONES][3] = { -- { MT8173_TS2, MT8173_TS3 }, -- { MT8173_TS2, MT8173_TS4 }, -- { MT8173_TS1, MT8173_TS2, MT8173_TSABB }, -- { MT8173_TS2 }, --}; -- --static const int mt8173_msr[MT8173_NUM_SENSORS_PER_ZONE] = { -- TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3 --}; -- --static const int mt8173_adcpnp[MT8173_NUM_SENSORS_PER_ZONE] = { -- TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3 --}; -- --static const int mt8173_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 }; --static const int mt8173_tc_offset[MT8173_NUM_CONTROLLER] = { 0x0, }; -- --static const int mt8173_vts_index[MT8173_NUM_SENSORS] = { -- VTS1, VTS2, VTS3, VTS4, VTSABB --}; -- --/* MT2701 thermal sensor data */ --static const int mt2701_bank_data[MT2701_NUM_SENSORS] = { -- MT2701_TS1, MT2701_TS2, MT2701_TSABB --}; -- --static const int mt2701_msr[MT2701_NUM_SENSORS_PER_ZONE] = { -- TEMP_MSR0, TEMP_MSR1, TEMP_MSR2 --}; -- --static const int mt2701_adcpnp[MT2701_NUM_SENSORS_PER_ZONE] = { -- TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2 --}; -- --static const int mt2701_mux_values[MT2701_NUM_SENSORS] = { 0, 1, 16 }; --static const int mt2701_tc_offset[MT2701_NUM_CONTROLLER] = { 0x0, }; -- --static const int mt2701_vts_index[MT2701_NUM_SENSORS] = { -- VTS1, VTS2, VTS3 --}; -- --/* MT2712 thermal sensor data */ --static const int mt2712_bank_data[MT2712_NUM_SENSORS] = { -- MT2712_TS1, MT2712_TS2, MT2712_TS3, MT2712_TS4 --}; -- --static const int mt2712_msr[MT2712_NUM_SENSORS_PER_ZONE] = { -- TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3 --}; -- --static const int mt2712_adcpnp[MT2712_NUM_SENSORS_PER_ZONE] = { -- TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3 --}; -- --static const int mt2712_mux_values[MT2712_NUM_SENSORS] = { 0, 1, 2, 3 }; --static const int mt2712_tc_offset[MT2712_NUM_CONTROLLER] = { 0x0, }; -- --static const int mt2712_vts_index[MT2712_NUM_SENSORS] = { -- VTS1, VTS2, VTS3, VTS4 --}; -- --/* MT7622 thermal sensor data */ --static const int mt7622_bank_data[MT7622_NUM_SENSORS] = { MT7622_TS1, }; --static const int mt7622_msr[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, }; --static const int mt7622_adcpnp[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, }; --static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, }; --static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 }; --static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, }; -- --/* MT7986 thermal sensor data */ --static const int mt7986_bank_data[MT7986_NUM_SENSORS] = { MT7986_TS1, }; --static const int mt7986_msr[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, }; --static const int mt7986_adcpnp[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, }; --static const int mt7986_mux_values[MT7986_NUM_SENSORS] = { 0, }; --static const int mt7986_vts_index[MT7986_NUM_SENSORS] = { VTS1 }; --static const int mt7986_tc_offset[MT7986_NUM_CONTROLLER] = { 0x0, }; -- --/* -- * The MT8173 thermal controller has four banks. Each bank can read up to -- * four temperature sensors simultaneously. The MT8173 has a total of 5 -- * temperature sensors. We use each bank to measure a certain area of the -- * SoC. Since TS2 is located centrally in the SoC it is influenced by multiple -- * areas, hence is used in different banks. -- * -- * The thermal core only gets the maximum temperature of all banks, so -- * the bank concept wouldn't be necessary here. However, the SVS (Smart -- * Voltage Scaling) unit makes its decisions based on the same bank -- * data, and this indeed needs the temperatures of the individual banks -- * for making better decisions. -- */ --static const struct mtk_thermal_data mt8173_thermal_data = { -- .auxadc_channel = MT8173_TEMP_AUXADC_CHANNEL, -- .num_banks = MT8173_NUM_ZONES, -- .num_sensors = MT8173_NUM_SENSORS, -- .vts_index = mt8173_vts_index, -- .cali_val = MT8173_CALIBRATION, -- .num_controller = MT8173_NUM_CONTROLLER, -- .controller_offset = mt8173_tc_offset, -- .need_switch_bank = true, -- .bank_data = { -- { -- .num_sensors = 2, -- .sensors = mt8173_bank_data[0], -- }, { -- .num_sensors = 2, -- .sensors = mt8173_bank_data[1], -- }, { -- .num_sensors = 3, -- .sensors = mt8173_bank_data[2], -- }, { -- .num_sensors = 1, -- .sensors = mt8173_bank_data[3], -- }, -- }, -- .msr = mt8173_msr, -- .adcpnp = mt8173_adcpnp, -- .sensor_mux_values = mt8173_mux_values, -- .version = MTK_THERMAL_V1, --}; -- --/* -- * The MT2701 thermal controller has one bank, which can read up to -- * three temperature sensors simultaneously. The MT2701 has a total of 3 -- * temperature sensors. -- * -- * The thermal core only gets the maximum temperature of this one bank, -- * so the bank concept wouldn't be necessary here. However, the SVS (Smart -- * Voltage Scaling) unit makes its decisions based on the same bank -- * data. -- */ --static const struct mtk_thermal_data mt2701_thermal_data = { -- .auxadc_channel = MT2701_TEMP_AUXADC_CHANNEL, -- .num_banks = 1, -- .num_sensors = MT2701_NUM_SENSORS, -- .vts_index = mt2701_vts_index, -- .cali_val = MT2701_CALIBRATION, -- .num_controller = MT2701_NUM_CONTROLLER, -- .controller_offset = mt2701_tc_offset, -- .need_switch_bank = true, -- .bank_data = { -- { -- .num_sensors = 3, -- .sensors = mt2701_bank_data, -- }, -- }, -- .msr = mt2701_msr, -- .adcpnp = mt2701_adcpnp, -- .sensor_mux_values = mt2701_mux_values, -- .version = MTK_THERMAL_V1, --}; -- --/* -- * The MT2712 thermal controller has one bank, which can read up to -- * four temperature sensors simultaneously. The MT2712 has a total of 4 -- * temperature sensors. -- * -- * The thermal core only gets the maximum temperature of this one bank, -- * so the bank concept wouldn't be necessary here. However, the SVS (Smart -- * Voltage Scaling) unit makes its decisions based on the same bank -- * data. -- */ --static const struct mtk_thermal_data mt2712_thermal_data = { -- .auxadc_channel = MT2712_TEMP_AUXADC_CHANNEL, -- .num_banks = 1, -- .num_sensors = MT2712_NUM_SENSORS, -- .vts_index = mt2712_vts_index, -- .cali_val = MT2712_CALIBRATION, -- .num_controller = MT2712_NUM_CONTROLLER, -- .controller_offset = mt2712_tc_offset, -- .need_switch_bank = true, -- .bank_data = { -- { -- .num_sensors = 4, -- .sensors = mt2712_bank_data, -- }, -- }, -- .msr = mt2712_msr, -- .adcpnp = mt2712_adcpnp, -- .sensor_mux_values = mt2712_mux_values, -- .version = MTK_THERMAL_V1, --}; -- --/* -- * MT7622 have only one sensing point which uses AUXADC Channel 11 for raw data -- * access. -- */ --static const struct mtk_thermal_data mt7622_thermal_data = { -- .auxadc_channel = MT7622_TEMP_AUXADC_CHANNEL, -- .num_banks = MT7622_NUM_ZONES, -- .num_sensors = MT7622_NUM_SENSORS, -- .vts_index = mt7622_vts_index, -- .cali_val = MT7622_CALIBRATION, -- .num_controller = MT7622_NUM_CONTROLLER, -- .controller_offset = mt7622_tc_offset, -- .need_switch_bank = true, -- .bank_data = { -- { -- .num_sensors = 1, -- .sensors = mt7622_bank_data, -- }, -- }, -- .msr = mt7622_msr, -- .adcpnp = mt7622_adcpnp, -- .sensor_mux_values = mt7622_mux_values, -- .version = MTK_THERMAL_V2, --}; -- --/* -- * The MT8183 thermal controller has one bank for the current SW framework. -- * The MT8183 has a total of 6 temperature sensors. -- * There are two thermal controller to control the six sensor. -- * The first one bind 2 sensor, and the other bind 4 sensors. -- * The thermal core only gets the maximum temperature of all sensor, so -- * the bank concept wouldn't be necessary here. However, the SVS (Smart -- * Voltage Scaling) unit makes its decisions based on the same bank -- * data, and this indeed needs the temperatures of the individual banks -- * for making better decisions. -- */ --static const struct mtk_thermal_data mt8183_thermal_data = { -- .auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL, -- .num_banks = MT8183_NUM_ZONES, -- .num_sensors = MT8183_NUM_SENSORS, -- .vts_index = mt8183_vts_index, -- .cali_val = MT8183_CALIBRATION, -- .num_controller = MT8183_NUM_CONTROLLER, -- .controller_offset = mt8183_tc_offset, -- .need_switch_bank = false, -- .bank_data = { -- { -- .num_sensors = 6, -- .sensors = mt8183_bank_data, -- }, -- }, -- -- .msr = mt8183_msr, -- .adcpnp = mt8183_adcpnp, -- .sensor_mux_values = mt8183_mux_values, -- .version = MTK_THERMAL_V1, --}; -- --/* -- * MT7986 uses AUXADC Channel 11 for raw data access. -- */ --static const struct mtk_thermal_data mt7986_thermal_data = { -- .auxadc_channel = MT7986_TEMP_AUXADC_CHANNEL, -- .num_banks = MT7986_NUM_ZONES, -- .num_sensors = MT7986_NUM_SENSORS, -- .vts_index = mt7986_vts_index, -- .cali_val = MT7986_CALIBRATION, -- .num_controller = MT7986_NUM_CONTROLLER, -- .controller_offset = mt7986_tc_offset, -- .need_switch_bank = true, -- .bank_data = { -- { -- .num_sensors = 1, -- .sensors = mt7986_bank_data, -- }, -- }, -- .msr = mt7986_msr, -- .adcpnp = mt7986_adcpnp, -- .sensor_mux_values = mt7986_mux_values, -- .version = MTK_THERMAL_V3, --}; -- --/** -- * raw_to_mcelsius_v1 - convert a raw ADC value to mcelsius -- * @mt: The thermal controller -- * @sensno: sensor number -- * @raw: raw ADC value -- * -- * This converts the raw ADC value to mcelsius using the SoC specific -- * calibration constants -- */ --static int raw_to_mcelsius_v1(struct mtk_thermal *mt, int sensno, s32 raw) --{ -- s32 tmp; -- -- raw &= 0xfff; -- -- tmp = 203450520 << 3; -- tmp /= mt->conf->cali_val + mt->o_slope; -- tmp /= 10000 + mt->adc_ge; -- tmp *= raw - mt->vts[sensno] - 3350; -- tmp >>= 3; -- -- return mt->degc_cali * 500 - tmp; --} -- --static int raw_to_mcelsius_v2(struct mtk_thermal *mt, int sensno, s32 raw) --{ -- s32 format_1; -- s32 format_2; -- s32 g_oe; -- s32 g_gain; -- s32 g_x_roomt; -- s32 tmp; -- -- if (raw == 0) -- return 0; -- -- raw &= 0xfff; -- g_gain = 10000 + (((mt->adc_ge - 512) * 10000) >> 12); -- g_oe = mt->adc_oe - 512; -- format_1 = mt->vts[VTS2] + 3105 - g_oe; -- format_2 = (mt->degc_cali * 10) >> 1; -- g_x_roomt = (((format_1 * 10000) >> 12) * 10000) / g_gain; -- -- tmp = (((((raw - g_oe) * 10000) >> 12) * 10000) / g_gain) - g_x_roomt; -- tmp = tmp * 10 * 100 / 11; -- -- if (mt->o_slope_sign == 0) -- tmp = tmp / (165 - mt->o_slope); -- else -- tmp = tmp / (165 + mt->o_slope); -- -- return (format_2 - tmp) * 100; --} -- --static int raw_to_mcelsius_v3(struct mtk_thermal *mt, int sensno, s32 raw) --{ -- s32 tmp; -- -- if (raw == 0) -- return 0; -- -- raw &= 0xfff; -- tmp = 100000 * 15 / 16 * 10000; -- tmp /= 4096 - 512 + mt->adc_ge; -- tmp /= 1490; -- tmp *= raw - mt->vts[sensno] - 2900; -- -- return mt->degc_cali * 500 - tmp; --} -- --/** -- * mtk_thermal_get_bank - get bank -- * @bank: The bank -- * -- * The bank registers are banked, we have to select a bank in the -- * PTPCORESEL register to access it. -- */ --static void mtk_thermal_get_bank(struct mtk_thermal_bank *bank) --{ -- struct mtk_thermal *mt = bank->mt; -- u32 val; -- -- if (mt->conf->need_switch_bank) { -- mutex_lock(&mt->lock); -- -- val = readl(mt->thermal_base + PTPCORESEL); -- val &= ~0xf; -- val |= bank->id; -- writel(val, mt->thermal_base + PTPCORESEL); -- } --} -- --/** -- * mtk_thermal_put_bank - release bank -- * @bank: The bank -- * -- * release a bank previously taken with mtk_thermal_get_bank, -- */ --static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank) --{ -- struct mtk_thermal *mt = bank->mt; -- -- if (mt->conf->need_switch_bank) -- mutex_unlock(&mt->lock); --} -- --/** -- * mtk_thermal_bank_temperature - get the temperature of a bank -- * @bank: The bank -- * -- * The temperature of a bank is considered the maximum temperature of -- * the sensors associated to the bank. -- */ --static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank) --{ -- struct mtk_thermal *mt = bank->mt; -- const struct mtk_thermal_data *conf = mt->conf; -- int i, temp = INT_MIN, max = INT_MIN; -- u32 raw; -- -- for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) { -- raw = readl(mt->thermal_base + conf->msr[i]); -- -- temp = mt->raw_to_mcelsius( -- mt, conf->bank_data[bank->id].sensors[i], raw); -- -- -- /* -- * The first read of a sensor often contains very high bogus -- * temperature value. Filter these out so that the system does -- * not immediately shut down. -- */ -- if (temp > 200000) -- temp = 0; -- -- if (temp > max) -- max = temp; -- } -- -- return max; --} -- --static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature) --{ -- struct mtk_thermal *mt = tz->devdata; -- int i; -- int tempmax = INT_MIN; -- -- for (i = 0; i < mt->conf->num_banks; i++) { -- struct mtk_thermal_bank *bank = &mt->banks[i]; -- -- mtk_thermal_get_bank(bank); -- -- tempmax = max(tempmax, mtk_thermal_bank_temperature(bank)); -- -- mtk_thermal_put_bank(bank); -- } -- -- *temperature = tempmax; -- -- return 0; --} -- --static const struct thermal_zone_device_ops mtk_thermal_ops = { -- .get_temp = mtk_read_temp, --}; -- --static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num, -- u32 apmixed_phys_base, u32 auxadc_phys_base, -- int ctrl_id) --{ -- struct mtk_thermal_bank *bank = &mt->banks[num]; -- const struct mtk_thermal_data *conf = mt->conf; -- int i; -- -- int offset = mt->conf->controller_offset[ctrl_id]; -- void __iomem *controller_base = mt->thermal_base + offset; -- -- bank->id = num; -- bank->mt = mt; -- -- mtk_thermal_get_bank(bank); -- -- /* bus clock 66M counting unit is 12 * 15.15ns * 256 = 46.540us */ -- writel(TEMP_MONCTL1_PERIOD_UNIT(12), controller_base + TEMP_MONCTL1); -- -- /* -- * filt interval is 1 * 46.540us = 46.54us, -- * sen interval is 429 * 46.540us = 19.96ms -- */ -- writel(TEMP_MONCTL2_FILTER_INTERVAL(1) | -- TEMP_MONCTL2_SENSOR_INTERVAL(429), -- controller_base + TEMP_MONCTL2); -- -- /* poll is set to 10u */ -- writel(TEMP_AHBPOLL_ADC_POLL_INTERVAL(768), -- controller_base + TEMP_AHBPOLL); -- -- /* temperature sampling control, 1 sample */ -- writel(0x0, controller_base + TEMP_MSRCTL0); -- -- /* exceed this polling time, IRQ would be inserted */ -- writel(0xffffffff, controller_base + TEMP_AHBTO); -- -- /* number of interrupts per event, 1 is enough */ -- writel(0x0, controller_base + TEMP_MONIDET0); -- writel(0x0, controller_base + TEMP_MONIDET1); -- -- /* -- * The MT8173 thermal controller does not have its own ADC. Instead it -- * uses AHB bus accesses to control the AUXADC. To do this the thermal -- * controller has to be programmed with the physical addresses of the -- * AUXADC registers and with the various bit positions in the AUXADC. -- * Also the thermal controller controls a mux in the APMIXEDSYS register -- * space. -- */ -- -- /* -- * this value will be stored to TEMP_PNPMUXADDR (TEMP_SPARE0) -- * automatically by hw -- */ -- writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCMUX); -- -- /* AHB address for auxadc mux selection */ -- writel(auxadc_phys_base + AUXADC_CON1_CLR_V, -- controller_base + TEMP_ADCMUXADDR); -- -- if (mt->conf->version == MTK_THERMAL_V1) { -- /* AHB address for pnp sensor mux selection */ -- writel(apmixed_phys_base + APMIXED_SYS_TS_CON1, -- controller_base + TEMP_PNPMUXADDR); -- } -- -- /* AHB value for auxadc enable */ -- writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCEN); -- -- /* AHB address for auxadc enable (channel 0 immediate mode selected) */ -- writel(auxadc_phys_base + AUXADC_CON1_SET_V, -- controller_base + TEMP_ADCENADDR); -- -- /* AHB address for auxadc valid bit */ -- writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel), -- controller_base + TEMP_ADCVALIDADDR); -- -- /* AHB address for auxadc voltage output */ -- writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel), -- controller_base + TEMP_ADCVOLTADDR); -- -- /* read valid & voltage are at the same register */ -- writel(0x0, controller_base + TEMP_RDCTRL); -- -- /* indicate where the valid bit is */ -- writel(TEMP_ADCVALIDMASK_VALID_HIGH | TEMP_ADCVALIDMASK_VALID_POS(12), -- controller_base + TEMP_ADCVALIDMASK); -- -- /* no shift */ -- writel(0x0, controller_base + TEMP_ADCVOLTAGESHIFT); -- -- /* enable auxadc mux write transaction */ -- writel(TEMP_ADCWRITECTRL_ADC_MUX_WRITE, -- controller_base + TEMP_ADCWRITECTRL); -- -- for (i = 0; i < conf->bank_data[num].num_sensors; i++) -- writel(conf->sensor_mux_values[conf->bank_data[num].sensors[i]], -- mt->thermal_base + conf->adcpnp[i]); -- -- writel((1 << conf->bank_data[num].num_sensors) - 1, -- controller_base + TEMP_MONCTL0); -- -- writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE | -- TEMP_ADCWRITECTRL_ADC_MUX_WRITE, -- controller_base + TEMP_ADCWRITECTRL); -- -- mtk_thermal_put_bank(bank); --} -- --static u64 of_get_phys_base(struct device_node *np) --{ -- u64 size64; -- const __be32 *regaddr_p; -- -- regaddr_p = of_get_address(np, 0, &size64, NULL); -- if (!regaddr_p) -- return OF_BAD_ADDR; -- -- return of_translate_address(np, regaddr_p); --} -- --static int mtk_thermal_extract_efuse_v1(struct mtk_thermal *mt, u32 *buf) --{ -- int i; -- -- if (!(buf[0] & CALIB_BUF0_VALID_V1)) -- return -EINVAL; -- -- mt->adc_ge = CALIB_BUF1_ADC_GE_V1(buf[1]); -- -- for (i = 0; i < mt->conf->num_sensors; i++) { -- switch (mt->conf->vts_index[i]) { -- case VTS1: -- mt->vts[VTS1] = CALIB_BUF0_VTS_TS1_V1(buf[0]); -- break; -- case VTS2: -- mt->vts[VTS2] = CALIB_BUF0_VTS_TS2_V1(buf[0]); -- break; -- case VTS3: -- mt->vts[VTS3] = CALIB_BUF1_VTS_TS3_V1(buf[1]); -- break; -- case VTS4: -- mt->vts[VTS4] = CALIB_BUF2_VTS_TS4_V1(buf[2]); -- break; -- case VTS5: -- mt->vts[VTS5] = CALIB_BUF2_VTS_TS5_V1(buf[2]); -- break; -- case VTSABB: -- mt->vts[VTSABB] = -- CALIB_BUF2_VTS_TSABB_V1(buf[2]); -- break; -- default: -- break; -- } -- } -- -- mt->degc_cali = CALIB_BUF0_DEGC_CALI_V1(buf[0]); -- if (CALIB_BUF1_ID_V1(buf[1]) & -- CALIB_BUF0_O_SLOPE_SIGN_V1(buf[0])) -- mt->o_slope = -CALIB_BUF0_O_SLOPE_V1(buf[0]); -- else -- mt->o_slope = CALIB_BUF0_O_SLOPE_V1(buf[0]); -- -- return 0; --} -- --static int mtk_thermal_extract_efuse_v2(struct mtk_thermal *mt, u32 *buf) --{ -- if (!CALIB_BUF1_VALID_V2(buf[1])) -- return -EINVAL; -- -- mt->adc_oe = CALIB_BUF0_ADC_OE_V2(buf[0]); -- mt->adc_ge = CALIB_BUF0_ADC_GE_V2(buf[0]); -- mt->degc_cali = CALIB_BUF0_DEGC_CALI_V2(buf[0]); -- mt->o_slope = CALIB_BUF0_O_SLOPE_V2(buf[0]); -- mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V2(buf[1]); -- mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V2(buf[1]); -- mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V2(buf[1]); -- mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V2(buf[1]); -- -- return 0; --} -- --static int mtk_thermal_extract_efuse_v3(struct mtk_thermal *mt, u32 *buf) --{ -- if (!CALIB_BUF1_VALID_V3(buf[1])) -- return -EINVAL; -- -- mt->adc_ge = CALIB_BUF0_ADC_GE_V3(buf[0]); -- mt->degc_cali = CALIB_BUF0_DEGC_CALI_V3(buf[0]); -- mt->o_slope = CALIB_BUF0_O_SLOPE_V3(buf[0]); -- mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V3(buf[1]); -- mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V3(buf[1]); -- mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V3(buf[1]); -- mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V3(buf[1]); -- -- if (CALIB_BUF1_ID_V3(buf[1]) == 0) -- mt->o_slope = 0; -- -- return 0; --} -- --static int mtk_thermal_get_calibration_data(struct device *dev, -- struct mtk_thermal *mt) --{ -- struct nvmem_cell *cell; -- u32 *buf; -- size_t len; -- int i, ret = 0; -- -- /* Start with default values */ -- mt->adc_ge = 512; -- mt->adc_oe = 512; -- for (i = 0; i < mt->conf->num_sensors; i++) -- mt->vts[i] = 260; -- mt->degc_cali = 40; -- mt->o_slope = 0; -- -- cell = nvmem_cell_get(dev, "calibration-data"); -- if (IS_ERR(cell)) { -- if (PTR_ERR(cell) == -EPROBE_DEFER) -- return PTR_ERR(cell); -- return 0; -- } -- -- buf = (u32 *)nvmem_cell_read(cell, &len); -- -- nvmem_cell_put(cell); -- -- if (IS_ERR(buf)) -- return PTR_ERR(buf); -- -- if (len < 3 * sizeof(u32)) { -- dev_warn(dev, "invalid calibration data\n"); -- ret = -EINVAL; -- goto out; -- } -- -- switch (mt->conf->version) { -- case MTK_THERMAL_V1: -- ret = mtk_thermal_extract_efuse_v1(mt, buf); -- break; -- case MTK_THERMAL_V2: -- ret = mtk_thermal_extract_efuse_v2(mt, buf); -- break; -- case MTK_THERMAL_V3: -- ret = mtk_thermal_extract_efuse_v3(mt, buf); -- break; -- default: -- ret = -EINVAL; -- break; -- } -- -- if (ret) { -- dev_info(dev, "Device not calibrated, using default calibration values\n"); -- ret = 0; -- } -- --out: -- kfree(buf); -- -- return ret; --} -- --static const struct of_device_id mtk_thermal_of_match[] = { -- { -- .compatible = "mediatek,mt8173-thermal", -- .data = (void *)&mt8173_thermal_data, -- }, -- { -- .compatible = "mediatek,mt2701-thermal", -- .data = (void *)&mt2701_thermal_data, -- }, -- { -- .compatible = "mediatek,mt2712-thermal", -- .data = (void *)&mt2712_thermal_data, -- }, -- { -- .compatible = "mediatek,mt7622-thermal", -- .data = (void *)&mt7622_thermal_data, -- }, -- { -- .compatible = "mediatek,mt7986-thermal", -- .data = (void *)&mt7986_thermal_data, -- }, -- { -- .compatible = "mediatek,mt8183-thermal", -- .data = (void *)&mt8183_thermal_data, -- }, { -- }, --}; --MODULE_DEVICE_TABLE(of, mtk_thermal_of_match); -- --static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base) --{ -- int tmp; -- -- tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1); -- tmp &= ~(0x37); -- tmp |= 0x1; -- writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1); -- udelay(200); --} -- --static void mtk_thermal_release_periodic_ts(struct mtk_thermal *mt, -- void __iomem *auxadc_base) --{ -- int tmp; -- -- writel(0x800, auxadc_base + AUXADC_CON1_SET_V); -- writel(0x1, mt->thermal_base + TEMP_MONCTL0); -- tmp = readl(mt->thermal_base + TEMP_MSRCTL1); -- writel((tmp & (~0x10e)), mt->thermal_base + TEMP_MSRCTL1); --} -- --static int mtk_thermal_probe(struct platform_device *pdev) --{ -- int ret, i, ctrl_id; -- struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node; -- struct mtk_thermal *mt; -- u64 auxadc_phys_base, apmixed_phys_base; -- struct thermal_zone_device *tzdev; -- void __iomem *apmixed_base, *auxadc_base; -- -- mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL); -- if (!mt) -- return -ENOMEM; -- -- mt->conf = of_device_get_match_data(&pdev->dev); -- -- mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm"); -- if (IS_ERR(mt->clk_peri_therm)) -- return PTR_ERR(mt->clk_peri_therm); -- -- mt->clk_auxadc = devm_clk_get(&pdev->dev, "auxadc"); -- if (IS_ERR(mt->clk_auxadc)) -- return PTR_ERR(mt->clk_auxadc); -- -- mt->thermal_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); -- if (IS_ERR(mt->thermal_base)) -- return PTR_ERR(mt->thermal_base); -- -- ret = mtk_thermal_get_calibration_data(&pdev->dev, mt); -- if (ret) -- return ret; -- -- mutex_init(&mt->lock); -- -- mt->dev = &pdev->dev; -- -- auxadc = of_parse_phandle(np, "mediatek,auxadc", 0); -- if (!auxadc) { -- dev_err(&pdev->dev, "missing auxadc node\n"); -- return -ENODEV; -- } -- -- auxadc_base = of_iomap(auxadc, 0); -- auxadc_phys_base = of_get_phys_base(auxadc); -- -- of_node_put(auxadc); -- -- if (auxadc_phys_base == OF_BAD_ADDR) { -- dev_err(&pdev->dev, "Can't get auxadc phys address\n"); -- return -EINVAL; -- } -- -- apmixedsys = of_parse_phandle(np, "mediatek,apmixedsys", 0); -- if (!apmixedsys) { -- dev_err(&pdev->dev, "missing apmixedsys node\n"); -- return -ENODEV; -- } -- -- apmixed_base = of_iomap(apmixedsys, 0); -- apmixed_phys_base = of_get_phys_base(apmixedsys); -- -- of_node_put(apmixedsys); -- -- if (apmixed_phys_base == OF_BAD_ADDR) { -- dev_err(&pdev->dev, "Can't get auxadc phys address\n"); -- return -EINVAL; -- } -- -- ret = device_reset_optional(&pdev->dev); -- if (ret) -- return ret; -- -- ret = clk_prepare_enable(mt->clk_auxadc); -- if (ret) { -- dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret); -- return ret; -- } -- -- ret = clk_prepare_enable(mt->clk_peri_therm); -- if (ret) { -- dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret); -- goto err_disable_clk_auxadc; -- } -- -- if (mt->conf->version != MTK_THERMAL_V1) { -- mtk_thermal_turn_on_buffer(apmixed_base); -- mtk_thermal_release_periodic_ts(mt, auxadc_base); -- } -- -- if (mt->conf->version == MTK_THERMAL_V1) -- mt->raw_to_mcelsius = raw_to_mcelsius_v1; -- else if (mt->conf->version == MTK_THERMAL_V2) -- mt->raw_to_mcelsius = raw_to_mcelsius_v2; -- else -- mt->raw_to_mcelsius = raw_to_mcelsius_v3; -- -- for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++) -- for (i = 0; i < mt->conf->num_banks; i++) -- mtk_thermal_init_bank(mt, i, apmixed_phys_base, -- auxadc_phys_base, ctrl_id); -- -- platform_set_drvdata(pdev, mt); -- -- tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt, -- &mtk_thermal_ops); -- if (IS_ERR(tzdev)) { -- ret = PTR_ERR(tzdev); -- goto err_disable_clk_peri_therm; -- } -- -- ret = devm_thermal_add_hwmon_sysfs(tzdev); -- if (ret) -- dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs"); -- -- return 0; -- --err_disable_clk_peri_therm: -- clk_disable_unprepare(mt->clk_peri_therm); --err_disable_clk_auxadc: -- clk_disable_unprepare(mt->clk_auxadc); -- -- return ret; --} -- --static int mtk_thermal_remove(struct platform_device *pdev) --{ -- struct mtk_thermal *mt = platform_get_drvdata(pdev); -- -- clk_disable_unprepare(mt->clk_peri_therm); -- clk_disable_unprepare(mt->clk_auxadc); -- -- return 0; --} -- --static struct platform_driver mtk_thermal_driver = { -- .probe = mtk_thermal_probe, -- .remove = mtk_thermal_remove, -- .driver = { -- .name = "mtk-thermal", -- .of_match_table = mtk_thermal_of_match, -- }, --}; -- --module_platform_driver(mtk_thermal_driver); -- --MODULE_AUTHOR("Michael Kao "); --MODULE_AUTHOR("Louis Yu "); --MODULE_AUTHOR("Dawei Chien "); --MODULE_AUTHOR("Sascha Hauer "); --MODULE_AUTHOR("Hanyi Wu "); --MODULE_DESCRIPTION("Mediatek thermal driver"); --MODULE_LICENSE("GPL v2"); ---- /dev/null -+++ b/drivers/thermal/mediatek/auxadc_thermal.c -@@ -0,0 +1,1254 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+/* -+ * Copyright (c) 2015 MediaTek Inc. -+ * Author: Hanyi Wu -+ * Sascha Hauer -+ * Dawei Chien -+ * Louis Yu -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "../thermal_hwmon.h" -+ -+/* AUXADC Registers */ -+#define AUXADC_CON1_SET_V 0x008 -+#define AUXADC_CON1_CLR_V 0x00c -+#define AUXADC_CON2_V 0x010 -+#define AUXADC_DATA(channel) (0x14 + (channel) * 4) -+ -+#define APMIXED_SYS_TS_CON1 0x604 -+ -+/* Thermal Controller Registers */ -+#define TEMP_MONCTL0 0x000 -+#define TEMP_MONCTL1 0x004 -+#define TEMP_MONCTL2 0x008 -+#define TEMP_MONIDET0 0x014 -+#define TEMP_MONIDET1 0x018 -+#define TEMP_MSRCTL0 0x038 -+#define TEMP_MSRCTL1 0x03c -+#define TEMP_AHBPOLL 0x040 -+#define TEMP_AHBTO 0x044 -+#define TEMP_ADCPNP0 0x048 -+#define TEMP_ADCPNP1 0x04c -+#define TEMP_ADCPNP2 0x050 -+#define TEMP_ADCPNP3 0x0b4 -+ -+#define TEMP_ADCMUX 0x054 -+#define TEMP_ADCEN 0x060 -+#define TEMP_PNPMUXADDR 0x064 -+#define TEMP_ADCMUXADDR 0x068 -+#define TEMP_ADCENADDR 0x074 -+#define TEMP_ADCVALIDADDR 0x078 -+#define TEMP_ADCVOLTADDR 0x07c -+#define TEMP_RDCTRL 0x080 -+#define TEMP_ADCVALIDMASK 0x084 -+#define TEMP_ADCVOLTAGESHIFT 0x088 -+#define TEMP_ADCWRITECTRL 0x08c -+#define TEMP_MSR0 0x090 -+#define TEMP_MSR1 0x094 -+#define TEMP_MSR2 0x098 -+#define TEMP_MSR3 0x0B8 -+ -+#define TEMP_SPARE0 0x0f0 -+ -+#define TEMP_ADCPNP0_1 0x148 -+#define TEMP_ADCPNP1_1 0x14c -+#define TEMP_ADCPNP2_1 0x150 -+#define TEMP_MSR0_1 0x190 -+#define TEMP_MSR1_1 0x194 -+#define TEMP_MSR2_1 0x198 -+#define TEMP_ADCPNP3_1 0x1b4 -+#define TEMP_MSR3_1 0x1B8 -+ -+#define PTPCORESEL 0x400 -+ -+#define TEMP_MONCTL1_PERIOD_UNIT(x) ((x) & 0x3ff) -+ -+#define TEMP_MONCTL2_FILTER_INTERVAL(x) (((x) & 0x3ff) << 16) -+#define TEMP_MONCTL2_SENSOR_INTERVAL(x) ((x) & 0x3ff) -+ -+#define TEMP_AHBPOLL_ADC_POLL_INTERVAL(x) (x) -+ -+#define TEMP_ADCWRITECTRL_ADC_PNP_WRITE BIT(0) -+#define TEMP_ADCWRITECTRL_ADC_MUX_WRITE BIT(1) -+ -+#define TEMP_ADCVALIDMASK_VALID_HIGH BIT(5) -+#define TEMP_ADCVALIDMASK_VALID_POS(bit) (bit) -+ -+/* MT8173 thermal sensors */ -+#define MT8173_TS1 0 -+#define MT8173_TS2 1 -+#define MT8173_TS3 2 -+#define MT8173_TS4 3 -+#define MT8173_TSABB 4 -+ -+/* AUXADC channel 11 is used for the temperature sensors */ -+#define MT8173_TEMP_AUXADC_CHANNEL 11 -+ -+/* The total number of temperature sensors in the MT8173 */ -+#define MT8173_NUM_SENSORS 5 -+ -+/* The number of banks in the MT8173 */ -+#define MT8173_NUM_ZONES 4 -+ -+/* The number of sensing points per bank */ -+#define MT8173_NUM_SENSORS_PER_ZONE 4 -+ -+/* The number of controller in the MT8173 */ -+#define MT8173_NUM_CONTROLLER 1 -+ -+/* The calibration coefficient of sensor */ -+#define MT8173_CALIBRATION 165 -+ -+/* -+ * Layout of the fuses providing the calibration data -+ * These macros could be used for MT8183, MT8173, MT2701, and MT2712. -+ * MT8183 has 6 sensors and needs 6 VTS calibration data. -+ * MT8173 has 5 sensors and needs 5 VTS calibration data. -+ * MT2701 has 3 sensors and needs 3 VTS calibration data. -+ * MT2712 has 4 sensors and needs 4 VTS calibration data. -+ */ -+#define CALIB_BUF0_VALID_V1 BIT(0) -+#define CALIB_BUF1_ADC_GE_V1(x) (((x) >> 22) & 0x3ff) -+#define CALIB_BUF0_VTS_TS1_V1(x) (((x) >> 17) & 0x1ff) -+#define CALIB_BUF0_VTS_TS2_V1(x) (((x) >> 8) & 0x1ff) -+#define CALIB_BUF1_VTS_TS3_V1(x) (((x) >> 0) & 0x1ff) -+#define CALIB_BUF2_VTS_TS4_V1(x) (((x) >> 23) & 0x1ff) -+#define CALIB_BUF2_VTS_TS5_V1(x) (((x) >> 5) & 0x1ff) -+#define CALIB_BUF2_VTS_TSABB_V1(x) (((x) >> 14) & 0x1ff) -+#define CALIB_BUF0_DEGC_CALI_V1(x) (((x) >> 1) & 0x3f) -+#define CALIB_BUF0_O_SLOPE_V1(x) (((x) >> 26) & 0x3f) -+#define CALIB_BUF0_O_SLOPE_SIGN_V1(x) (((x) >> 7) & 0x1) -+#define CALIB_BUF1_ID_V1(x) (((x) >> 9) & 0x1) -+ -+/* -+ * Layout of the fuses providing the calibration data -+ * These macros could be used for MT7622. -+ */ -+#define CALIB_BUF0_ADC_OE_V2(x) (((x) >> 22) & 0x3ff) -+#define CALIB_BUF0_ADC_GE_V2(x) (((x) >> 12) & 0x3ff) -+#define CALIB_BUF0_DEGC_CALI_V2(x) (((x) >> 6) & 0x3f) -+#define CALIB_BUF0_O_SLOPE_V2(x) (((x) >> 0) & 0x3f) -+#define CALIB_BUF1_VTS_TS1_V2(x) (((x) >> 23) & 0x1ff) -+#define CALIB_BUF1_VTS_TS2_V2(x) (((x) >> 14) & 0x1ff) -+#define CALIB_BUF1_VTS_TSABB_V2(x) (((x) >> 5) & 0x1ff) -+#define CALIB_BUF1_VALID_V2(x) (((x) >> 4) & 0x1) -+#define CALIB_BUF1_O_SLOPE_SIGN_V2(x) (((x) >> 3) & 0x1) -+ -+/* -+ * Layout of the fuses providing the calibration data -+ * These macros can be used for MT7981 and MT7986. -+ */ -+#define CALIB_BUF0_ADC_GE_V3(x) (((x) >> 0) & 0x3ff) -+#define CALIB_BUF0_DEGC_CALI_V3(x) (((x) >> 20) & 0x3f) -+#define CALIB_BUF0_O_SLOPE_V3(x) (((x) >> 26) & 0x3f) -+#define CALIB_BUF1_VTS_TS1_V3(x) (((x) >> 0) & 0x1ff) -+#define CALIB_BUF1_VTS_TS2_V3(x) (((x) >> 21) & 0x1ff) -+#define CALIB_BUF1_VTS_TSABB_V3(x) (((x) >> 9) & 0x1ff) -+#define CALIB_BUF1_VALID_V3(x) (((x) >> 18) & 0x1) -+#define CALIB_BUF1_O_SLOPE_SIGN_V3(x) (((x) >> 19) & 0x1) -+#define CALIB_BUF1_ID_V3(x) (((x) >> 20) & 0x1) -+ -+enum { -+ VTS1, -+ VTS2, -+ VTS3, -+ VTS4, -+ VTS5, -+ VTSABB, -+ MAX_NUM_VTS, -+}; -+ -+enum mtk_thermal_version { -+ MTK_THERMAL_V1 = 1, -+ MTK_THERMAL_V2, -+ MTK_THERMAL_V3, -+}; -+ -+/* MT2701 thermal sensors */ -+#define MT2701_TS1 0 -+#define MT2701_TS2 1 -+#define MT2701_TSABB 2 -+ -+/* AUXADC channel 11 is used for the temperature sensors */ -+#define MT2701_TEMP_AUXADC_CHANNEL 11 -+ -+/* The total number of temperature sensors in the MT2701 */ -+#define MT2701_NUM_SENSORS 3 -+ -+/* The number of sensing points per bank */ -+#define MT2701_NUM_SENSORS_PER_ZONE 3 -+ -+/* The number of controller in the MT2701 */ -+#define MT2701_NUM_CONTROLLER 1 -+ -+/* The calibration coefficient of sensor */ -+#define MT2701_CALIBRATION 165 -+ -+/* MT2712 thermal sensors */ -+#define MT2712_TS1 0 -+#define MT2712_TS2 1 -+#define MT2712_TS3 2 -+#define MT2712_TS4 3 -+ -+/* AUXADC channel 11 is used for the temperature sensors */ -+#define MT2712_TEMP_AUXADC_CHANNEL 11 -+ -+/* The total number of temperature sensors in the MT2712 */ -+#define MT2712_NUM_SENSORS 4 -+ -+/* The number of sensing points per bank */ -+#define MT2712_NUM_SENSORS_PER_ZONE 4 -+ -+/* The number of controller in the MT2712 */ -+#define MT2712_NUM_CONTROLLER 1 -+ -+/* The calibration coefficient of sensor */ -+#define MT2712_CALIBRATION 165 -+ -+#define MT7622_TEMP_AUXADC_CHANNEL 11 -+#define MT7622_NUM_SENSORS 1 -+#define MT7622_NUM_ZONES 1 -+#define MT7622_NUM_SENSORS_PER_ZONE 1 -+#define MT7622_TS1 0 -+#define MT7622_NUM_CONTROLLER 1 -+ -+/* The maximum number of banks */ -+#define MAX_NUM_ZONES 8 -+ -+/* The calibration coefficient of sensor */ -+#define MT7622_CALIBRATION 165 -+ -+/* MT8183 thermal sensors */ -+#define MT8183_TS1 0 -+#define MT8183_TS2 1 -+#define MT8183_TS3 2 -+#define MT8183_TS4 3 -+#define MT8183_TS5 4 -+#define MT8183_TSABB 5 -+ -+/* AUXADC channel is used for the temperature sensors */ -+#define MT8183_TEMP_AUXADC_CHANNEL 11 -+ -+/* The total number of temperature sensors in the MT8183 */ -+#define MT8183_NUM_SENSORS 6 -+ -+/* The number of banks in the MT8183 */ -+#define MT8183_NUM_ZONES 1 -+ -+/* The number of sensing points per bank */ -+#define MT8183_NUM_SENSORS_PER_ZONE 6 -+ -+/* The number of controller in the MT8183 */ -+#define MT8183_NUM_CONTROLLER 2 -+ -+/* The calibration coefficient of sensor */ -+#define MT8183_CALIBRATION 153 -+ -+/* AUXADC channel 11 is used for the temperature sensors */ -+#define MT7986_TEMP_AUXADC_CHANNEL 11 -+ -+/* The total number of temperature sensors in the MT7986 */ -+#define MT7986_NUM_SENSORS 1 -+ -+/* The number of banks in the MT7986 */ -+#define MT7986_NUM_ZONES 1 -+ -+/* The number of sensing points per bank */ -+#define MT7986_NUM_SENSORS_PER_ZONE 1 -+ -+/* MT7986 thermal sensors */ -+#define MT7986_TS1 0 -+ -+/* The number of controller in the MT7986 */ -+#define MT7986_NUM_CONTROLLER 1 -+ -+/* The calibration coefficient of sensor */ -+#define MT7986_CALIBRATION 165 -+ -+struct mtk_thermal; -+ -+struct thermal_bank_cfg { -+ unsigned int num_sensors; -+ const int *sensors; -+}; -+ -+struct mtk_thermal_bank { -+ struct mtk_thermal *mt; -+ int id; -+}; -+ -+struct mtk_thermal_data { -+ s32 num_banks; -+ s32 num_sensors; -+ s32 auxadc_channel; -+ const int *vts_index; -+ const int *sensor_mux_values; -+ const int *msr; -+ const int *adcpnp; -+ const int cali_val; -+ const int num_controller; -+ const int *controller_offset; -+ bool need_switch_bank; -+ struct thermal_bank_cfg bank_data[MAX_NUM_ZONES]; -+ enum mtk_thermal_version version; -+}; -+ -+struct mtk_thermal { -+ struct device *dev; -+ void __iomem *thermal_base; -+ -+ struct clk *clk_peri_therm; -+ struct clk *clk_auxadc; -+ /* lock: for getting and putting banks */ -+ struct mutex lock; -+ -+ /* Calibration values */ -+ s32 adc_ge; -+ s32 adc_oe; -+ s32 degc_cali; -+ s32 o_slope; -+ s32 o_slope_sign; -+ s32 vts[MAX_NUM_VTS]; -+ -+ const struct mtk_thermal_data *conf; -+ struct mtk_thermal_bank banks[MAX_NUM_ZONES]; -+ -+ int (*raw_to_mcelsius)(struct mtk_thermal *mt, int sensno, s32 raw); -+}; -+ -+/* MT8183 thermal sensor data */ -+static const int mt8183_bank_data[MT8183_NUM_SENSORS] = { -+ MT8183_TS1, MT8183_TS2, MT8183_TS3, MT8183_TS4, MT8183_TS5, MT8183_TSABB -+}; -+ -+static const int mt8183_msr[MT8183_NUM_SENSORS_PER_ZONE] = { -+ TEMP_MSR0_1, TEMP_MSR1_1, TEMP_MSR2_1, TEMP_MSR1, TEMP_MSR0, TEMP_MSR3_1 -+}; -+ -+static const int mt8183_adcpnp[MT8183_NUM_SENSORS_PER_ZONE] = { -+ TEMP_ADCPNP0_1, TEMP_ADCPNP1_1, TEMP_ADCPNP2_1, -+ TEMP_ADCPNP1, TEMP_ADCPNP0, TEMP_ADCPNP3_1 -+}; -+ -+static const int mt8183_mux_values[MT8183_NUM_SENSORS] = { 0, 1, 2, 3, 4, 0 }; -+static const int mt8183_tc_offset[MT8183_NUM_CONTROLLER] = {0x0, 0x100}; -+ -+static const int mt8183_vts_index[MT8183_NUM_SENSORS] = { -+ VTS1, VTS2, VTS3, VTS4, VTS5, VTSABB -+}; -+ -+/* MT8173 thermal sensor data */ -+static const int mt8173_bank_data[MT8173_NUM_ZONES][3] = { -+ { MT8173_TS2, MT8173_TS3 }, -+ { MT8173_TS2, MT8173_TS4 }, -+ { MT8173_TS1, MT8173_TS2, MT8173_TSABB }, -+ { MT8173_TS2 }, -+}; -+ -+static const int mt8173_msr[MT8173_NUM_SENSORS_PER_ZONE] = { -+ TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3 -+}; -+ -+static const int mt8173_adcpnp[MT8173_NUM_SENSORS_PER_ZONE] = { -+ TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3 -+}; -+ -+static const int mt8173_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 }; -+static const int mt8173_tc_offset[MT8173_NUM_CONTROLLER] = { 0x0, }; -+ -+static const int mt8173_vts_index[MT8173_NUM_SENSORS] = { -+ VTS1, VTS2, VTS3, VTS4, VTSABB -+}; -+ -+/* MT2701 thermal sensor data */ -+static const int mt2701_bank_data[MT2701_NUM_SENSORS] = { -+ MT2701_TS1, MT2701_TS2, MT2701_TSABB -+}; -+ -+static const int mt2701_msr[MT2701_NUM_SENSORS_PER_ZONE] = { -+ TEMP_MSR0, TEMP_MSR1, TEMP_MSR2 -+}; -+ -+static const int mt2701_adcpnp[MT2701_NUM_SENSORS_PER_ZONE] = { -+ TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2 -+}; -+ -+static const int mt2701_mux_values[MT2701_NUM_SENSORS] = { 0, 1, 16 }; -+static const int mt2701_tc_offset[MT2701_NUM_CONTROLLER] = { 0x0, }; -+ -+static const int mt2701_vts_index[MT2701_NUM_SENSORS] = { -+ VTS1, VTS2, VTS3 -+}; -+ -+/* MT2712 thermal sensor data */ -+static const int mt2712_bank_data[MT2712_NUM_SENSORS] = { -+ MT2712_TS1, MT2712_TS2, MT2712_TS3, MT2712_TS4 -+}; -+ -+static const int mt2712_msr[MT2712_NUM_SENSORS_PER_ZONE] = { -+ TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3 -+}; -+ -+static const int mt2712_adcpnp[MT2712_NUM_SENSORS_PER_ZONE] = { -+ TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3 -+}; -+ -+static const int mt2712_mux_values[MT2712_NUM_SENSORS] = { 0, 1, 2, 3 }; -+static const int mt2712_tc_offset[MT2712_NUM_CONTROLLER] = { 0x0, }; -+ -+static const int mt2712_vts_index[MT2712_NUM_SENSORS] = { -+ VTS1, VTS2, VTS3, VTS4 -+}; -+ -+/* MT7622 thermal sensor data */ -+static const int mt7622_bank_data[MT7622_NUM_SENSORS] = { MT7622_TS1, }; -+static const int mt7622_msr[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, }; -+static const int mt7622_adcpnp[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, }; -+static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, }; -+static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 }; -+static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, }; -+ -+/* MT7986 thermal sensor data */ -+static const int mt7986_bank_data[MT7986_NUM_SENSORS] = { MT7986_TS1, }; -+static const int mt7986_msr[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, }; -+static const int mt7986_adcpnp[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, }; -+static const int mt7986_mux_values[MT7986_NUM_SENSORS] = { 0, }; -+static const int mt7986_vts_index[MT7986_NUM_SENSORS] = { VTS1 }; -+static const int mt7986_tc_offset[MT7986_NUM_CONTROLLER] = { 0x0, }; -+ -+/* -+ * The MT8173 thermal controller has four banks. Each bank can read up to -+ * four temperature sensors simultaneously. The MT8173 has a total of 5 -+ * temperature sensors. We use each bank to measure a certain area of the -+ * SoC. Since TS2 is located centrally in the SoC it is influenced by multiple -+ * areas, hence is used in different banks. -+ * -+ * The thermal core only gets the maximum temperature of all banks, so -+ * the bank concept wouldn't be necessary here. However, the SVS (Smart -+ * Voltage Scaling) unit makes its decisions based on the same bank -+ * data, and this indeed needs the temperatures of the individual banks -+ * for making better decisions. -+ */ -+static const struct mtk_thermal_data mt8173_thermal_data = { -+ .auxadc_channel = MT8173_TEMP_AUXADC_CHANNEL, -+ .num_banks = MT8173_NUM_ZONES, -+ .num_sensors = MT8173_NUM_SENSORS, -+ .vts_index = mt8173_vts_index, -+ .cali_val = MT8173_CALIBRATION, -+ .num_controller = MT8173_NUM_CONTROLLER, -+ .controller_offset = mt8173_tc_offset, -+ .need_switch_bank = true, -+ .bank_data = { -+ { -+ .num_sensors = 2, -+ .sensors = mt8173_bank_data[0], -+ }, { -+ .num_sensors = 2, -+ .sensors = mt8173_bank_data[1], -+ }, { -+ .num_sensors = 3, -+ .sensors = mt8173_bank_data[2], -+ }, { -+ .num_sensors = 1, -+ .sensors = mt8173_bank_data[3], -+ }, -+ }, -+ .msr = mt8173_msr, -+ .adcpnp = mt8173_adcpnp, -+ .sensor_mux_values = mt8173_mux_values, -+ .version = MTK_THERMAL_V1, -+}; -+ -+/* -+ * The MT2701 thermal controller has one bank, which can read up to -+ * three temperature sensors simultaneously. The MT2701 has a total of 3 -+ * temperature sensors. -+ * -+ * The thermal core only gets the maximum temperature of this one bank, -+ * so the bank concept wouldn't be necessary here. However, the SVS (Smart -+ * Voltage Scaling) unit makes its decisions based on the same bank -+ * data. -+ */ -+static const struct mtk_thermal_data mt2701_thermal_data = { -+ .auxadc_channel = MT2701_TEMP_AUXADC_CHANNEL, -+ .num_banks = 1, -+ .num_sensors = MT2701_NUM_SENSORS, -+ .vts_index = mt2701_vts_index, -+ .cali_val = MT2701_CALIBRATION, -+ .num_controller = MT2701_NUM_CONTROLLER, -+ .controller_offset = mt2701_tc_offset, -+ .need_switch_bank = true, -+ .bank_data = { -+ { -+ .num_sensors = 3, -+ .sensors = mt2701_bank_data, -+ }, -+ }, -+ .msr = mt2701_msr, -+ .adcpnp = mt2701_adcpnp, -+ .sensor_mux_values = mt2701_mux_values, -+ .version = MTK_THERMAL_V1, -+}; -+ -+/* -+ * The MT2712 thermal controller has one bank, which can read up to -+ * four temperature sensors simultaneously. The MT2712 has a total of 4 -+ * temperature sensors. -+ * -+ * The thermal core only gets the maximum temperature of this one bank, -+ * so the bank concept wouldn't be necessary here. However, the SVS (Smart -+ * Voltage Scaling) unit makes its decisions based on the same bank -+ * data. -+ */ -+static const struct mtk_thermal_data mt2712_thermal_data = { -+ .auxadc_channel = MT2712_TEMP_AUXADC_CHANNEL, -+ .num_banks = 1, -+ .num_sensors = MT2712_NUM_SENSORS, -+ .vts_index = mt2712_vts_index, -+ .cali_val = MT2712_CALIBRATION, -+ .num_controller = MT2712_NUM_CONTROLLER, -+ .controller_offset = mt2712_tc_offset, -+ .need_switch_bank = true, -+ .bank_data = { -+ { -+ .num_sensors = 4, -+ .sensors = mt2712_bank_data, -+ }, -+ }, -+ .msr = mt2712_msr, -+ .adcpnp = mt2712_adcpnp, -+ .sensor_mux_values = mt2712_mux_values, -+ .version = MTK_THERMAL_V1, -+}; -+ -+/* -+ * MT7622 have only one sensing point which uses AUXADC Channel 11 for raw data -+ * access. -+ */ -+static const struct mtk_thermal_data mt7622_thermal_data = { -+ .auxadc_channel = MT7622_TEMP_AUXADC_CHANNEL, -+ .num_banks = MT7622_NUM_ZONES, -+ .num_sensors = MT7622_NUM_SENSORS, -+ .vts_index = mt7622_vts_index, -+ .cali_val = MT7622_CALIBRATION, -+ .num_controller = MT7622_NUM_CONTROLLER, -+ .controller_offset = mt7622_tc_offset, -+ .need_switch_bank = true, -+ .bank_data = { -+ { -+ .num_sensors = 1, -+ .sensors = mt7622_bank_data, -+ }, -+ }, -+ .msr = mt7622_msr, -+ .adcpnp = mt7622_adcpnp, -+ .sensor_mux_values = mt7622_mux_values, -+ .version = MTK_THERMAL_V2, -+}; -+ -+/* -+ * The MT8183 thermal controller has one bank for the current SW framework. -+ * The MT8183 has a total of 6 temperature sensors. -+ * There are two thermal controller to control the six sensor. -+ * The first one bind 2 sensor, and the other bind 4 sensors. -+ * The thermal core only gets the maximum temperature of all sensor, so -+ * the bank concept wouldn't be necessary here. However, the SVS (Smart -+ * Voltage Scaling) unit makes its decisions based on the same bank -+ * data, and this indeed needs the temperatures of the individual banks -+ * for making better decisions. -+ */ -+static const struct mtk_thermal_data mt8183_thermal_data = { -+ .auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL, -+ .num_banks = MT8183_NUM_ZONES, -+ .num_sensors = MT8183_NUM_SENSORS, -+ .vts_index = mt8183_vts_index, -+ .cali_val = MT8183_CALIBRATION, -+ .num_controller = MT8183_NUM_CONTROLLER, -+ .controller_offset = mt8183_tc_offset, -+ .need_switch_bank = false, -+ .bank_data = { -+ { -+ .num_sensors = 6, -+ .sensors = mt8183_bank_data, -+ }, -+ }, -+ -+ .msr = mt8183_msr, -+ .adcpnp = mt8183_adcpnp, -+ .sensor_mux_values = mt8183_mux_values, -+ .version = MTK_THERMAL_V1, -+}; -+ -+/* -+ * MT7986 uses AUXADC Channel 11 for raw data access. -+ */ -+static const struct mtk_thermal_data mt7986_thermal_data = { -+ .auxadc_channel = MT7986_TEMP_AUXADC_CHANNEL, -+ .num_banks = MT7986_NUM_ZONES, -+ .num_sensors = MT7986_NUM_SENSORS, -+ .vts_index = mt7986_vts_index, -+ .cali_val = MT7986_CALIBRATION, -+ .num_controller = MT7986_NUM_CONTROLLER, -+ .controller_offset = mt7986_tc_offset, -+ .need_switch_bank = true, -+ .bank_data = { -+ { -+ .num_sensors = 1, -+ .sensors = mt7986_bank_data, -+ }, -+ }, -+ .msr = mt7986_msr, -+ .adcpnp = mt7986_adcpnp, -+ .sensor_mux_values = mt7986_mux_values, -+ .version = MTK_THERMAL_V3, -+}; -+ -+/** -+ * raw_to_mcelsius_v1 - convert a raw ADC value to mcelsius -+ * @mt: The thermal controller -+ * @sensno: sensor number -+ * @raw: raw ADC value -+ * -+ * This converts the raw ADC value to mcelsius using the SoC specific -+ * calibration constants -+ */ -+static int raw_to_mcelsius_v1(struct mtk_thermal *mt, int sensno, s32 raw) -+{ -+ s32 tmp; -+ -+ raw &= 0xfff; -+ -+ tmp = 203450520 << 3; -+ tmp /= mt->conf->cali_val + mt->o_slope; -+ tmp /= 10000 + mt->adc_ge; -+ tmp *= raw - mt->vts[sensno] - 3350; -+ tmp >>= 3; -+ -+ return mt->degc_cali * 500 - tmp; -+} -+ -+static int raw_to_mcelsius_v2(struct mtk_thermal *mt, int sensno, s32 raw) -+{ -+ s32 format_1; -+ s32 format_2; -+ s32 g_oe; -+ s32 g_gain; -+ s32 g_x_roomt; -+ s32 tmp; -+ -+ if (raw == 0) -+ return 0; -+ -+ raw &= 0xfff; -+ g_gain = 10000 + (((mt->adc_ge - 512) * 10000) >> 12); -+ g_oe = mt->adc_oe - 512; -+ format_1 = mt->vts[VTS2] + 3105 - g_oe; -+ format_2 = (mt->degc_cali * 10) >> 1; -+ g_x_roomt = (((format_1 * 10000) >> 12) * 10000) / g_gain; -+ -+ tmp = (((((raw - g_oe) * 10000) >> 12) * 10000) / g_gain) - g_x_roomt; -+ tmp = tmp * 10 * 100 / 11; -+ -+ if (mt->o_slope_sign == 0) -+ tmp = tmp / (165 - mt->o_slope); -+ else -+ tmp = tmp / (165 + mt->o_slope); -+ -+ return (format_2 - tmp) * 100; -+} -+ -+static int raw_to_mcelsius_v3(struct mtk_thermal *mt, int sensno, s32 raw) -+{ -+ s32 tmp; -+ -+ if (raw == 0) -+ return 0; -+ -+ raw &= 0xfff; -+ tmp = 100000 * 15 / 16 * 10000; -+ tmp /= 4096 - 512 + mt->adc_ge; -+ tmp /= 1490; -+ tmp *= raw - mt->vts[sensno] - 2900; -+ -+ return mt->degc_cali * 500 - tmp; -+} -+ -+/** -+ * mtk_thermal_get_bank - get bank -+ * @bank: The bank -+ * -+ * The bank registers are banked, we have to select a bank in the -+ * PTPCORESEL register to access it. -+ */ -+static void mtk_thermal_get_bank(struct mtk_thermal_bank *bank) -+{ -+ struct mtk_thermal *mt = bank->mt; -+ u32 val; -+ -+ if (mt->conf->need_switch_bank) { -+ mutex_lock(&mt->lock); -+ -+ val = readl(mt->thermal_base + PTPCORESEL); -+ val &= ~0xf; -+ val |= bank->id; -+ writel(val, mt->thermal_base + PTPCORESEL); -+ } -+} -+ -+/** -+ * mtk_thermal_put_bank - release bank -+ * @bank: The bank -+ * -+ * release a bank previously taken with mtk_thermal_get_bank, -+ */ -+static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank) -+{ -+ struct mtk_thermal *mt = bank->mt; -+ -+ if (mt->conf->need_switch_bank) -+ mutex_unlock(&mt->lock); -+} -+ -+/** -+ * mtk_thermal_bank_temperature - get the temperature of a bank -+ * @bank: The bank -+ * -+ * The temperature of a bank is considered the maximum temperature of -+ * the sensors associated to the bank. -+ */ -+static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank) -+{ -+ struct mtk_thermal *mt = bank->mt; -+ const struct mtk_thermal_data *conf = mt->conf; -+ int i, temp = INT_MIN, max = INT_MIN; -+ u32 raw; -+ -+ for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) { -+ raw = readl(mt->thermal_base + conf->msr[i]); -+ -+ temp = mt->raw_to_mcelsius( -+ mt, conf->bank_data[bank->id].sensors[i], raw); -+ -+ -+ /* -+ * The first read of a sensor often contains very high bogus -+ * temperature value. Filter these out so that the system does -+ * not immediately shut down. -+ */ -+ if (temp > 200000) -+ temp = 0; -+ -+ if (temp > max) -+ max = temp; -+ } -+ -+ return max; -+} -+ -+static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature) -+{ -+ struct mtk_thermal *mt = tz->devdata; -+ int i; -+ int tempmax = INT_MIN; -+ -+ for (i = 0; i < mt->conf->num_banks; i++) { -+ struct mtk_thermal_bank *bank = &mt->banks[i]; -+ -+ mtk_thermal_get_bank(bank); -+ -+ tempmax = max(tempmax, mtk_thermal_bank_temperature(bank)); -+ -+ mtk_thermal_put_bank(bank); -+ } -+ -+ *temperature = tempmax; -+ -+ return 0; -+} -+ -+static const struct thermal_zone_device_ops mtk_thermal_ops = { -+ .get_temp = mtk_read_temp, -+}; -+ -+static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num, -+ u32 apmixed_phys_base, u32 auxadc_phys_base, -+ int ctrl_id) -+{ -+ struct mtk_thermal_bank *bank = &mt->banks[num]; -+ const struct mtk_thermal_data *conf = mt->conf; -+ int i; -+ -+ int offset = mt->conf->controller_offset[ctrl_id]; -+ void __iomem *controller_base = mt->thermal_base + offset; -+ -+ bank->id = num; -+ bank->mt = mt; -+ -+ mtk_thermal_get_bank(bank); -+ -+ /* bus clock 66M counting unit is 12 * 15.15ns * 256 = 46.540us */ -+ writel(TEMP_MONCTL1_PERIOD_UNIT(12), controller_base + TEMP_MONCTL1); -+ -+ /* -+ * filt interval is 1 * 46.540us = 46.54us, -+ * sen interval is 429 * 46.540us = 19.96ms -+ */ -+ writel(TEMP_MONCTL2_FILTER_INTERVAL(1) | -+ TEMP_MONCTL2_SENSOR_INTERVAL(429), -+ controller_base + TEMP_MONCTL2); -+ -+ /* poll is set to 10u */ -+ writel(TEMP_AHBPOLL_ADC_POLL_INTERVAL(768), -+ controller_base + TEMP_AHBPOLL); -+ -+ /* temperature sampling control, 1 sample */ -+ writel(0x0, controller_base + TEMP_MSRCTL0); -+ -+ /* exceed this polling time, IRQ would be inserted */ -+ writel(0xffffffff, controller_base + TEMP_AHBTO); -+ -+ /* number of interrupts per event, 1 is enough */ -+ writel(0x0, controller_base + TEMP_MONIDET0); -+ writel(0x0, controller_base + TEMP_MONIDET1); -+ -+ /* -+ * The MT8173 thermal controller does not have its own ADC. Instead it -+ * uses AHB bus accesses to control the AUXADC. To do this the thermal -+ * controller has to be programmed with the physical addresses of the -+ * AUXADC registers and with the various bit positions in the AUXADC. -+ * Also the thermal controller controls a mux in the APMIXEDSYS register -+ * space. -+ */ -+ -+ /* -+ * this value will be stored to TEMP_PNPMUXADDR (TEMP_SPARE0) -+ * automatically by hw -+ */ -+ writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCMUX); -+ -+ /* AHB address for auxadc mux selection */ -+ writel(auxadc_phys_base + AUXADC_CON1_CLR_V, -+ controller_base + TEMP_ADCMUXADDR); -+ -+ if (mt->conf->version == MTK_THERMAL_V1) { -+ /* AHB address for pnp sensor mux selection */ -+ writel(apmixed_phys_base + APMIXED_SYS_TS_CON1, -+ controller_base + TEMP_PNPMUXADDR); -+ } -+ -+ /* AHB value for auxadc enable */ -+ writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCEN); -+ -+ /* AHB address for auxadc enable (channel 0 immediate mode selected) */ -+ writel(auxadc_phys_base + AUXADC_CON1_SET_V, -+ controller_base + TEMP_ADCENADDR); -+ -+ /* AHB address for auxadc valid bit */ -+ writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel), -+ controller_base + TEMP_ADCVALIDADDR); -+ -+ /* AHB address for auxadc voltage output */ -+ writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel), -+ controller_base + TEMP_ADCVOLTADDR); -+ -+ /* read valid & voltage are at the same register */ -+ writel(0x0, controller_base + TEMP_RDCTRL); -+ -+ /* indicate where the valid bit is */ -+ writel(TEMP_ADCVALIDMASK_VALID_HIGH | TEMP_ADCVALIDMASK_VALID_POS(12), -+ controller_base + TEMP_ADCVALIDMASK); -+ -+ /* no shift */ -+ writel(0x0, controller_base + TEMP_ADCVOLTAGESHIFT); -+ -+ /* enable auxadc mux write transaction */ -+ writel(TEMP_ADCWRITECTRL_ADC_MUX_WRITE, -+ controller_base + TEMP_ADCWRITECTRL); -+ -+ for (i = 0; i < conf->bank_data[num].num_sensors; i++) -+ writel(conf->sensor_mux_values[conf->bank_data[num].sensors[i]], -+ mt->thermal_base + conf->adcpnp[i]); -+ -+ writel((1 << conf->bank_data[num].num_sensors) - 1, -+ controller_base + TEMP_MONCTL0); -+ -+ writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE | -+ TEMP_ADCWRITECTRL_ADC_MUX_WRITE, -+ controller_base + TEMP_ADCWRITECTRL); -+ -+ mtk_thermal_put_bank(bank); -+} -+ -+static u64 of_get_phys_base(struct device_node *np) -+{ -+ u64 size64; -+ const __be32 *regaddr_p; -+ -+ regaddr_p = of_get_address(np, 0, &size64, NULL); -+ if (!regaddr_p) -+ return OF_BAD_ADDR; -+ -+ return of_translate_address(np, regaddr_p); -+} -+ -+static int mtk_thermal_extract_efuse_v1(struct mtk_thermal *mt, u32 *buf) -+{ -+ int i; -+ -+ if (!(buf[0] & CALIB_BUF0_VALID_V1)) -+ return -EINVAL; -+ -+ mt->adc_ge = CALIB_BUF1_ADC_GE_V1(buf[1]); -+ -+ for (i = 0; i < mt->conf->num_sensors; i++) { -+ switch (mt->conf->vts_index[i]) { -+ case VTS1: -+ mt->vts[VTS1] = CALIB_BUF0_VTS_TS1_V1(buf[0]); -+ break; -+ case VTS2: -+ mt->vts[VTS2] = CALIB_BUF0_VTS_TS2_V1(buf[0]); -+ break; -+ case VTS3: -+ mt->vts[VTS3] = CALIB_BUF1_VTS_TS3_V1(buf[1]); -+ break; -+ case VTS4: -+ mt->vts[VTS4] = CALIB_BUF2_VTS_TS4_V1(buf[2]); -+ break; -+ case VTS5: -+ mt->vts[VTS5] = CALIB_BUF2_VTS_TS5_V1(buf[2]); -+ break; -+ case VTSABB: -+ mt->vts[VTSABB] = -+ CALIB_BUF2_VTS_TSABB_V1(buf[2]); -+ break; -+ default: -+ break; -+ } -+ } -+ -+ mt->degc_cali = CALIB_BUF0_DEGC_CALI_V1(buf[0]); -+ if (CALIB_BUF1_ID_V1(buf[1]) & -+ CALIB_BUF0_O_SLOPE_SIGN_V1(buf[0])) -+ mt->o_slope = -CALIB_BUF0_O_SLOPE_V1(buf[0]); -+ else -+ mt->o_slope = CALIB_BUF0_O_SLOPE_V1(buf[0]); -+ -+ return 0; -+} -+ -+static int mtk_thermal_extract_efuse_v2(struct mtk_thermal *mt, u32 *buf) -+{ -+ if (!CALIB_BUF1_VALID_V2(buf[1])) -+ return -EINVAL; -+ -+ mt->adc_oe = CALIB_BUF0_ADC_OE_V2(buf[0]); -+ mt->adc_ge = CALIB_BUF0_ADC_GE_V2(buf[0]); -+ mt->degc_cali = CALIB_BUF0_DEGC_CALI_V2(buf[0]); -+ mt->o_slope = CALIB_BUF0_O_SLOPE_V2(buf[0]); -+ mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V2(buf[1]); -+ mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V2(buf[1]); -+ mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V2(buf[1]); -+ mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V2(buf[1]); -+ -+ return 0; -+} -+ -+static int mtk_thermal_extract_efuse_v3(struct mtk_thermal *mt, u32 *buf) -+{ -+ if (!CALIB_BUF1_VALID_V3(buf[1])) -+ return -EINVAL; -+ -+ mt->adc_ge = CALIB_BUF0_ADC_GE_V3(buf[0]); -+ mt->degc_cali = CALIB_BUF0_DEGC_CALI_V3(buf[0]); -+ mt->o_slope = CALIB_BUF0_O_SLOPE_V3(buf[0]); -+ mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V3(buf[1]); -+ mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V3(buf[1]); -+ mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V3(buf[1]); -+ mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V3(buf[1]); -+ -+ if (CALIB_BUF1_ID_V3(buf[1]) == 0) -+ mt->o_slope = 0; -+ -+ return 0; -+} -+ -+static int mtk_thermal_get_calibration_data(struct device *dev, -+ struct mtk_thermal *mt) -+{ -+ struct nvmem_cell *cell; -+ u32 *buf; -+ size_t len; -+ int i, ret = 0; -+ -+ /* Start with default values */ -+ mt->adc_ge = 512; -+ mt->adc_oe = 512; -+ for (i = 0; i < mt->conf->num_sensors; i++) -+ mt->vts[i] = 260; -+ mt->degc_cali = 40; -+ mt->o_slope = 0; -+ -+ cell = nvmem_cell_get(dev, "calibration-data"); -+ if (IS_ERR(cell)) { -+ if (PTR_ERR(cell) == -EPROBE_DEFER) -+ return PTR_ERR(cell); -+ return 0; -+ } -+ -+ buf = (u32 *)nvmem_cell_read(cell, &len); -+ -+ nvmem_cell_put(cell); -+ -+ if (IS_ERR(buf)) -+ return PTR_ERR(buf); -+ -+ if (len < 3 * sizeof(u32)) { -+ dev_warn(dev, "invalid calibration data\n"); -+ ret = -EINVAL; -+ goto out; -+ } -+ -+ switch (mt->conf->version) { -+ case MTK_THERMAL_V1: -+ ret = mtk_thermal_extract_efuse_v1(mt, buf); -+ break; -+ case MTK_THERMAL_V2: -+ ret = mtk_thermal_extract_efuse_v2(mt, buf); -+ break; -+ case MTK_THERMAL_V3: -+ ret = mtk_thermal_extract_efuse_v3(mt, buf); -+ break; -+ default: -+ ret = -EINVAL; -+ break; -+ } -+ -+ if (ret) { -+ dev_info(dev, "Device not calibrated, using default calibration values\n"); -+ ret = 0; -+ } -+ -+out: -+ kfree(buf); -+ -+ return ret; -+} -+ -+static const struct of_device_id mtk_thermal_of_match[] = { -+ { -+ .compatible = "mediatek,mt8173-thermal", -+ .data = (void *)&mt8173_thermal_data, -+ }, -+ { -+ .compatible = "mediatek,mt2701-thermal", -+ .data = (void *)&mt2701_thermal_data, -+ }, -+ { -+ .compatible = "mediatek,mt2712-thermal", -+ .data = (void *)&mt2712_thermal_data, -+ }, -+ { -+ .compatible = "mediatek,mt7622-thermal", -+ .data = (void *)&mt7622_thermal_data, -+ }, -+ { -+ .compatible = "mediatek,mt7986-thermal", -+ .data = (void *)&mt7986_thermal_data, -+ }, -+ { -+ .compatible = "mediatek,mt8183-thermal", -+ .data = (void *)&mt8183_thermal_data, -+ }, { -+ }, -+}; -+MODULE_DEVICE_TABLE(of, mtk_thermal_of_match); -+ -+static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base) -+{ -+ int tmp; -+ -+ tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1); -+ tmp &= ~(0x37); -+ tmp |= 0x1; -+ writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1); -+ udelay(200); -+} -+ -+static void mtk_thermal_release_periodic_ts(struct mtk_thermal *mt, -+ void __iomem *auxadc_base) -+{ -+ int tmp; -+ -+ writel(0x800, auxadc_base + AUXADC_CON1_SET_V); -+ writel(0x1, mt->thermal_base + TEMP_MONCTL0); -+ tmp = readl(mt->thermal_base + TEMP_MSRCTL1); -+ writel((tmp & (~0x10e)), mt->thermal_base + TEMP_MSRCTL1); -+} -+ -+static int mtk_thermal_probe(struct platform_device *pdev) -+{ -+ int ret, i, ctrl_id; -+ struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node; -+ struct mtk_thermal *mt; -+ u64 auxadc_phys_base, apmixed_phys_base; -+ struct thermal_zone_device *tzdev; -+ void __iomem *apmixed_base, *auxadc_base; -+ -+ mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL); -+ if (!mt) -+ return -ENOMEM; -+ -+ mt->conf = of_device_get_match_data(&pdev->dev); -+ -+ mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm"); -+ if (IS_ERR(mt->clk_peri_therm)) -+ return PTR_ERR(mt->clk_peri_therm); -+ -+ mt->clk_auxadc = devm_clk_get(&pdev->dev, "auxadc"); -+ if (IS_ERR(mt->clk_auxadc)) -+ return PTR_ERR(mt->clk_auxadc); -+ -+ mt->thermal_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); -+ if (IS_ERR(mt->thermal_base)) -+ return PTR_ERR(mt->thermal_base); -+ -+ ret = mtk_thermal_get_calibration_data(&pdev->dev, mt); -+ if (ret) -+ return ret; -+ -+ mutex_init(&mt->lock); -+ -+ mt->dev = &pdev->dev; -+ -+ auxadc = of_parse_phandle(np, "mediatek,auxadc", 0); -+ if (!auxadc) { -+ dev_err(&pdev->dev, "missing auxadc node\n"); -+ return -ENODEV; -+ } -+ -+ auxadc_base = of_iomap(auxadc, 0); -+ auxadc_phys_base = of_get_phys_base(auxadc); -+ -+ of_node_put(auxadc); -+ -+ if (auxadc_phys_base == OF_BAD_ADDR) { -+ dev_err(&pdev->dev, "Can't get auxadc phys address\n"); -+ return -EINVAL; -+ } -+ -+ apmixedsys = of_parse_phandle(np, "mediatek,apmixedsys", 0); -+ if (!apmixedsys) { -+ dev_err(&pdev->dev, "missing apmixedsys node\n"); -+ return -ENODEV; -+ } -+ -+ apmixed_base = of_iomap(apmixedsys, 0); -+ apmixed_phys_base = of_get_phys_base(apmixedsys); -+ -+ of_node_put(apmixedsys); -+ -+ if (apmixed_phys_base == OF_BAD_ADDR) { -+ dev_err(&pdev->dev, "Can't get auxadc phys address\n"); -+ return -EINVAL; -+ } -+ -+ ret = device_reset_optional(&pdev->dev); -+ if (ret) -+ return ret; -+ -+ ret = clk_prepare_enable(mt->clk_auxadc); -+ if (ret) { -+ dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret); -+ return ret; -+ } -+ -+ ret = clk_prepare_enable(mt->clk_peri_therm); -+ if (ret) { -+ dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret); -+ goto err_disable_clk_auxadc; -+ } -+ -+ if (mt->conf->version != MTK_THERMAL_V1) { -+ mtk_thermal_turn_on_buffer(apmixed_base); -+ mtk_thermal_release_periodic_ts(mt, auxadc_base); -+ } -+ -+ if (mt->conf->version == MTK_THERMAL_V1) -+ mt->raw_to_mcelsius = raw_to_mcelsius_v1; -+ else if (mt->conf->version == MTK_THERMAL_V2) -+ mt->raw_to_mcelsius = raw_to_mcelsius_v2; -+ else -+ mt->raw_to_mcelsius = raw_to_mcelsius_v3; -+ -+ for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++) -+ for (i = 0; i < mt->conf->num_banks; i++) -+ mtk_thermal_init_bank(mt, i, apmixed_phys_base, -+ auxadc_phys_base, ctrl_id); -+ -+ platform_set_drvdata(pdev, mt); -+ -+ tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt, -+ &mtk_thermal_ops); -+ if (IS_ERR(tzdev)) { -+ ret = PTR_ERR(tzdev); -+ goto err_disable_clk_peri_therm; -+ } -+ -+ ret = devm_thermal_add_hwmon_sysfs(tzdev); -+ if (ret) -+ dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs"); -+ -+ return 0; -+ -+err_disable_clk_peri_therm: -+ clk_disable_unprepare(mt->clk_peri_therm); -+err_disable_clk_auxadc: -+ clk_disable_unprepare(mt->clk_auxadc); -+ -+ return ret; -+} -+ -+static int mtk_thermal_remove(struct platform_device *pdev) -+{ -+ struct mtk_thermal *mt = platform_get_drvdata(pdev); -+ -+ clk_disable_unprepare(mt->clk_peri_therm); -+ clk_disable_unprepare(mt->clk_auxadc); -+ -+ return 0; -+} -+ -+static struct platform_driver mtk_thermal_driver = { -+ .probe = mtk_thermal_probe, -+ .remove = mtk_thermal_remove, -+ .driver = { -+ .name = "mtk-thermal", -+ .of_match_table = mtk_thermal_of_match, -+ }, -+}; -+ -+module_platform_driver(mtk_thermal_driver); -+ -+MODULE_AUTHOR("Michael Kao "); -+MODULE_AUTHOR("Louis Yu "); -+MODULE_AUTHOR("Dawei Chien "); -+MODULE_AUTHOR("Sascha Hauer "); -+MODULE_AUTHOR("Hanyi Wu "); -+MODULE_DESCRIPTION("Mediatek thermal driver"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/mediatek/patches-6.1/830-v6.3-06-thermal-drivers-mediatek-Add-the-Low-Voltage-Thermal.patch b/target/linux/mediatek/patches-6.1/830-v6.3-06-thermal-drivers-mediatek-Add-the-Low-Voltage-Thermal.patch deleted file mode 100644 index 2ae3734e409..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.3-06-thermal-drivers-mediatek-Add-the-Low-Voltage-Thermal.patch +++ /dev/null @@ -1,1298 +0,0 @@ -From 325fadf27b21f7d79843c3cc282b7f3e6620ad3d Mon Sep 17 00:00:00 2001 -From: Balsam CHIHI -Date: Thu, 9 Feb 2023 11:56:26 +0100 -Subject: [PATCH 06/42] thermal/drivers/mediatek: Add the Low Voltage Thermal - Sensor driver - -The Low Voltage Thermal Sensor (LVTS) is a multiple sensors, multi -controllers contained in a thermal domain. - -A thermal domains can be the MCU or the AP. - -Each thermal domains contain up to seven controllers, each thermal -controller handle up to four thermal sensors. - -The LVTS has two Finite State Machines (FSM), one to handle the -functionin temperatures range like hot or cold temperature and another -one to handle monitoring trip point. The FSM notifies via interrupts -when a trip point is crossed. - -The interrupt is managed at the thermal controller level, so when an -interrupt occurs, the driver has to find out which sensor triggered -such an interrupt. - -The sampling of the thermal can be filtered or immediate. For the -former, the LVTS measures several points and applies a low pass -filter. - -Signed-off-by: Balsam CHIHI -Reviewed-by: AngeloGioacchino Del Regno - -On MT8195 Tomato Chromebook: - -Tested-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20230209105628.50294-5-bchihi@baylibre.com -Signed-off-by: Daniel Lezcano -Signed-off-by: Rafael J. Wysocki ---- - drivers/thermal/mediatek/Kconfig | 16 + - drivers/thermal/mediatek/Makefile | 1 + - drivers/thermal/mediatek/lvts_thermal.c | 1224 +++++++++++++++++++++++ - 3 files changed, 1241 insertions(+) - create mode 100644 drivers/thermal/mediatek/lvts_thermal.c - ---- a/drivers/thermal/mediatek/Kconfig -+++ b/drivers/thermal/mediatek/Kconfig -@@ -18,4 +18,20 @@ config MTK_SOC_THERMAL - This driver configures thermal controllers to collect - temperature via AUXADC interface. - -+config MTK_LVTS_THERMAL -+ tristate "LVTS Thermal Driver for MediaTek SoCs" -+ depends on HAS_IOMEM -+ help -+ Enable this option if you want to get SoC temperature -+ information for supported MediaTek platforms. -+ This driver configures LVTS (Low Voltage Thermal Sensor) -+ thermal controllers to collect temperatures via ASIF -+ (Analog Serial Interface). -+ -+config MTK_LVTS_THERMAL_DEBUGFS -+ bool "LVTS thermal debugfs" -+ depends on MTK_LVTS_THERMAL && DEBUG_FS -+ help -+ Enable this option to debug the internals of the device driver. -+ - endif ---- a/drivers/thermal/mediatek/Makefile -+++ b/drivers/thermal/mediatek/Makefile -@@ -1 +1,2 @@ - obj-$(CONFIG_MTK_SOC_THERMAL) += auxadc_thermal.o -+obj-$(CONFIG_MTK_LVTS_THERMAL) += lvts_thermal.o ---- /dev/null -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -0,0 +1,1224 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+/* -+ * Copyright (c) 2023 MediaTek Inc. -+ * Author: Balsam CHIHI -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define LVTS_MONCTL0(__base) (__base + 0x0000) -+#define LVTS_MONCTL1(__base) (__base + 0x0004) -+#define LVTS_MONCTL2(__base) (__base + 0x0008) -+#define LVTS_MONINT(__base) (__base + 0x000C) -+#define LVTS_MONINTSTS(__base) (__base + 0x0010) -+#define LVTS_MONIDET0(__base) (__base + 0x0014) -+#define LVTS_MONIDET1(__base) (__base + 0x0018) -+#define LVTS_MONIDET2(__base) (__base + 0x001C) -+#define LVTS_MONIDET3(__base) (__base + 0x0020) -+#define LVTS_H2NTHRE(__base) (__base + 0x0024) -+#define LVTS_HTHRE(__base) (__base + 0x0028) -+#define LVTS_OFFSETH(__base) (__base + 0x0030) -+#define LVTS_OFFSETL(__base) (__base + 0x0034) -+#define LVTS_MSRCTL0(__base) (__base + 0x0038) -+#define LVTS_MSRCTL1(__base) (__base + 0x003C) -+#define LVTS_TSSEL(__base) (__base + 0x0040) -+#define LVTS_CALSCALE(__base) (__base + 0x0048) -+#define LVTS_ID(__base) (__base + 0x004C) -+#define LVTS_CONFIG(__base) (__base + 0x0050) -+#define LVTS_EDATA00(__base) (__base + 0x0054) -+#define LVTS_EDATA01(__base) (__base + 0x0058) -+#define LVTS_EDATA02(__base) (__base + 0x005C) -+#define LVTS_EDATA03(__base) (__base + 0x0060) -+#define LVTS_MSR0(__base) (__base + 0x0090) -+#define LVTS_MSR1(__base) (__base + 0x0094) -+#define LVTS_MSR2(__base) (__base + 0x0098) -+#define LVTS_MSR3(__base) (__base + 0x009C) -+#define LVTS_IMMD0(__base) (__base + 0x00A0) -+#define LVTS_IMMD1(__base) (__base + 0x00A4) -+#define LVTS_IMMD2(__base) (__base + 0x00A8) -+#define LVTS_IMMD3(__base) (__base + 0x00AC) -+#define LVTS_PROTCTL(__base) (__base + 0x00C0) -+#define LVTS_PROTTA(__base) (__base + 0x00C4) -+#define LVTS_PROTTB(__base) (__base + 0x00C8) -+#define LVTS_PROTTC(__base) (__base + 0x00CC) -+#define LVTS_CLKEN(__base) (__base + 0x00E4) -+ -+#define LVTS_PERIOD_UNIT ((118 * 1000) / (256 * 38)) -+#define LVTS_GROUP_INTERVAL 1 -+#define LVTS_FILTER_INTERVAL 1 -+#define LVTS_SENSOR_INTERVAL 1 -+#define LVTS_HW_FILTER 0x2 -+#define LVTS_TSSEL_CONF 0x13121110 -+#define LVTS_CALSCALE_CONF 0x300 -+#define LVTS_MONINT_CONF 0x9FBF7BDE -+ -+#define LVTS_INT_SENSOR0 0x0009001F -+#define LVTS_INT_SENSOR1 0X000881F0 -+#define LVTS_INT_SENSOR2 0x00247C00 -+#define LVTS_INT_SENSOR3 0x1FC00000 -+ -+#define LVTS_SENSOR_MAX 4 -+#define LVTS_GOLDEN_TEMP_MAX 62 -+#define LVTS_GOLDEN_TEMP_DEFAULT 50 -+#define LVTS_COEFF_A -250460 -+#define LVTS_COEFF_B 250460 -+ -+#define LVTS_MSR_IMMEDIATE_MODE 0 -+#define LVTS_MSR_FILTERED_MODE 1 -+ -+#define LVTS_HW_SHUTDOWN_MT8195 105000 -+ -+static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT; -+static int coeff_b = LVTS_COEFF_B; -+ -+struct lvts_sensor_data { -+ int dt_id; -+}; -+ -+struct lvts_ctrl_data { -+ struct lvts_sensor_data lvts_sensor[LVTS_SENSOR_MAX]; -+ int cal_offset[LVTS_SENSOR_MAX]; -+ int hw_tshut_temp; -+ int num_lvts_sensor; -+ int offset; -+ int mode; -+}; -+ -+struct lvts_data { -+ const struct lvts_ctrl_data *lvts_ctrl; -+ int num_lvts_ctrl; -+}; -+ -+struct lvts_sensor { -+ struct thermal_zone_device *tz; -+ void __iomem *msr; -+ void __iomem *base; -+ int id; -+ int dt_id; -+}; -+ -+struct lvts_ctrl { -+ struct lvts_sensor sensors[LVTS_SENSOR_MAX]; -+ u32 calibration[LVTS_SENSOR_MAX]; -+ u32 hw_tshut_raw_temp; -+ int num_lvts_sensor; -+ int mode; -+ void __iomem *base; -+}; -+ -+struct lvts_domain { -+ struct lvts_ctrl *lvts_ctrl; -+ struct reset_control *reset; -+ struct clk *clk; -+ int num_lvts_ctrl; -+ void __iomem *base; -+ size_t calib_len; -+ u8 *calib; -+#ifdef CONFIG_DEBUG_FS -+ struct dentry *dom_dentry; -+#endif -+}; -+ -+#ifdef CONFIG_MTK_LVTS_THERMAL_DEBUGFS -+ -+#define LVTS_DEBUG_FS_REGS(__reg) \ -+{ \ -+ .name = __stringify(__reg), \ -+ .offset = __reg(0), \ -+} -+ -+static const struct debugfs_reg32 lvts_regs[] = { -+ LVTS_DEBUG_FS_REGS(LVTS_MONCTL0), -+ LVTS_DEBUG_FS_REGS(LVTS_MONCTL1), -+ LVTS_DEBUG_FS_REGS(LVTS_MONCTL2), -+ LVTS_DEBUG_FS_REGS(LVTS_MONINT), -+ LVTS_DEBUG_FS_REGS(LVTS_MONINTSTS), -+ LVTS_DEBUG_FS_REGS(LVTS_MONIDET0), -+ LVTS_DEBUG_FS_REGS(LVTS_MONIDET1), -+ LVTS_DEBUG_FS_REGS(LVTS_MONIDET2), -+ LVTS_DEBUG_FS_REGS(LVTS_MONIDET3), -+ LVTS_DEBUG_FS_REGS(LVTS_H2NTHRE), -+ LVTS_DEBUG_FS_REGS(LVTS_HTHRE), -+ LVTS_DEBUG_FS_REGS(LVTS_OFFSETH), -+ LVTS_DEBUG_FS_REGS(LVTS_OFFSETL), -+ LVTS_DEBUG_FS_REGS(LVTS_MSRCTL0), -+ LVTS_DEBUG_FS_REGS(LVTS_MSRCTL1), -+ LVTS_DEBUG_FS_REGS(LVTS_TSSEL), -+ LVTS_DEBUG_FS_REGS(LVTS_CALSCALE), -+ LVTS_DEBUG_FS_REGS(LVTS_ID), -+ LVTS_DEBUG_FS_REGS(LVTS_CONFIG), -+ LVTS_DEBUG_FS_REGS(LVTS_EDATA00), -+ LVTS_DEBUG_FS_REGS(LVTS_EDATA01), -+ LVTS_DEBUG_FS_REGS(LVTS_EDATA02), -+ LVTS_DEBUG_FS_REGS(LVTS_EDATA03), -+ LVTS_DEBUG_FS_REGS(LVTS_MSR0), -+ LVTS_DEBUG_FS_REGS(LVTS_MSR1), -+ LVTS_DEBUG_FS_REGS(LVTS_MSR2), -+ LVTS_DEBUG_FS_REGS(LVTS_MSR3), -+ LVTS_DEBUG_FS_REGS(LVTS_IMMD0), -+ LVTS_DEBUG_FS_REGS(LVTS_IMMD1), -+ LVTS_DEBUG_FS_REGS(LVTS_IMMD2), -+ LVTS_DEBUG_FS_REGS(LVTS_IMMD3), -+ LVTS_DEBUG_FS_REGS(LVTS_PROTCTL), -+ LVTS_DEBUG_FS_REGS(LVTS_PROTTA), -+ LVTS_DEBUG_FS_REGS(LVTS_PROTTB), -+ LVTS_DEBUG_FS_REGS(LVTS_PROTTC), -+ LVTS_DEBUG_FS_REGS(LVTS_CLKEN), -+}; -+ -+static int lvts_debugfs_init(struct device *dev, struct lvts_domain *lvts_td) -+{ -+ struct debugfs_regset32 *regset; -+ struct lvts_ctrl *lvts_ctrl; -+ struct dentry *dentry; -+ char name[64]; -+ int i; -+ -+ lvts_td->dom_dentry = debugfs_create_dir(dev_name(dev), NULL); -+ if (!lvts_td->dom_dentry) -+ return 0; -+ -+ for (i = 0; i < lvts_td->num_lvts_ctrl; i++) { -+ -+ lvts_ctrl = &lvts_td->lvts_ctrl[i]; -+ -+ sprintf(name, "controller%d", i); -+ dentry = debugfs_create_dir(name, lvts_td->dom_dentry); -+ if (!dentry) -+ continue; -+ -+ regset = devm_kzalloc(dev, sizeof(*regset), GFP_KERNEL); -+ if (!regset) -+ continue; -+ -+ regset->base = lvts_ctrl->base; -+ regset->regs = lvts_regs; -+ regset->nregs = ARRAY_SIZE(lvts_regs); -+ -+ debugfs_create_regset32("registers", 0400, dentry, regset); -+ } -+ -+ return 0; -+} -+ -+static void lvts_debugfs_exit(struct lvts_domain *lvts_td) -+{ -+ debugfs_remove_recursive(lvts_td->dom_dentry); -+} -+ -+#else -+ -+static inline int lvts_debugfs_init(struct device *dev, -+ struct lvts_domain *lvts_td) -+{ -+ return 0; -+} -+ -+static void lvts_debugfs_exit(struct lvts_domain *lvts_td) { } -+ -+#endif -+ -+static int lvts_raw_to_temp(u32 raw_temp) -+{ -+ int temperature; -+ -+ temperature = ((s64)(raw_temp & 0xFFFF) * LVTS_COEFF_A) >> 14; -+ temperature += coeff_b; -+ -+ return temperature; -+} -+ -+static u32 lvts_temp_to_raw(int temperature) -+{ -+ u32 raw_temp = ((s64)(coeff_b - temperature)) << 14; -+ -+ raw_temp = div_s64(raw_temp, -LVTS_COEFF_A); -+ -+ return raw_temp; -+} -+ -+static int lvts_get_temp(struct thermal_zone_device *tz, int *temp) -+{ -+ struct lvts_sensor *lvts_sensor = tz->devdata; -+ void __iomem *msr = lvts_sensor->msr; -+ u32 value; -+ -+ /* -+ * Measurement registers: -+ * -+ * LVTS_MSR[0-3] / LVTS_IMMD[0-3] -+ * -+ * Bits: -+ * -+ * 32-17: Unused -+ * 16 : Valid temperature -+ * 15-0 : Raw temperature -+ */ -+ value = readl(msr); -+ -+ /* -+ * As the thermal zone temperature will read before the -+ * hardware sensor is fully initialized, we have to check the -+ * validity of the temperature returned when reading the -+ * measurement register. The thermal controller will set the -+ * valid bit temperature only when it is totally initialized. -+ * -+ * Otherwise, we may end up with garbage values out of the -+ * functionning temperature and directly jump to a system -+ * shutdown. -+ */ -+ if (!(value & BIT(16))) -+ return -EAGAIN; -+ -+ *temp = lvts_raw_to_temp(value & 0xFFFF); -+ -+ return 0; -+} -+ -+static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high) -+{ -+ struct lvts_sensor *lvts_sensor = tz->devdata; -+ void __iomem *base = lvts_sensor->base; -+ u32 raw_low = lvts_temp_to_raw(low); -+ u32 raw_high = lvts_temp_to_raw(high); -+ -+ /* -+ * Hot to normal temperature threshold -+ * -+ * LVTS_H2NTHRE -+ * -+ * Bits: -+ * -+ * 14-0 : Raw temperature for threshold -+ */ -+ if (low != -INT_MAX) { -+ dev_dbg(&tz->device, "Setting low limit temperature interrupt: %d\n", low); -+ writel(raw_low, LVTS_H2NTHRE(base)); -+ } -+ -+ /* -+ * Hot temperature threshold -+ * -+ * LVTS_HTHRE -+ * -+ * Bits: -+ * -+ * 14-0 : Raw temperature for threshold -+ */ -+ dev_dbg(&tz->device, "Setting high limit temperature interrupt: %d\n", high); -+ writel(raw_high, LVTS_HTHRE(base)); -+ -+ return 0; -+} -+ -+static irqreturn_t lvts_ctrl_irq_handler(struct lvts_ctrl *lvts_ctrl) -+{ -+ irqreturn_t iret = IRQ_NONE; -+ u32 value; -+ u32 masks[] = { -+ LVTS_INT_SENSOR0, -+ LVTS_INT_SENSOR1, -+ LVTS_INT_SENSOR2, -+ LVTS_INT_SENSOR3 -+ }; -+ int i; -+ -+ /* -+ * Interrupt monitoring status -+ * -+ * LVTS_MONINTST -+ * -+ * Bits: -+ * -+ * 31 : Interrupt for stage 3 -+ * 30 : Interrupt for stage 2 -+ * 29 : Interrupt for state 1 -+ * 28 : Interrupt using filter on sensor 3 -+ * -+ * 27 : Interrupt using immediate on sensor 3 -+ * 26 : Interrupt normal to hot on sensor 3 -+ * 25 : Interrupt high offset on sensor 3 -+ * 24 : Interrupt low offset on sensor 3 -+ * -+ * 23 : Interrupt hot threshold on sensor 3 -+ * 22 : Interrupt cold threshold on sensor 3 -+ * 21 : Interrupt using filter on sensor 2 -+ * 20 : Interrupt using filter on sensor 1 -+ * -+ * 19 : Interrupt using filter on sensor 0 -+ * 18 : Interrupt using immediate on sensor 2 -+ * 17 : Interrupt using immediate on sensor 1 -+ * 16 : Interrupt using immediate on sensor 0 -+ * -+ * 15 : Interrupt device access timeout interrupt -+ * 14 : Interrupt normal to hot on sensor 2 -+ * 13 : Interrupt high offset interrupt on sensor 2 -+ * 12 : Interrupt low offset interrupt on sensor 2 -+ * -+ * 11 : Interrupt hot threshold on sensor 2 -+ * 10 : Interrupt cold threshold on sensor 2 -+ * 9 : Interrupt normal to hot on sensor 1 -+ * 8 : Interrupt high offset interrupt on sensor 1 -+ * -+ * 7 : Interrupt low offset interrupt on sensor 1 -+ * 6 : Interrupt hot threshold on sensor 1 -+ * 5 : Interrupt cold threshold on sensor 1 -+ * 4 : Interrupt normal to hot on sensor 0 -+ * -+ * 3 : Interrupt high offset interrupt on sensor 0 -+ * 2 : Interrupt low offset interrupt on sensor 0 -+ * 1 : Interrupt hot threshold on sensor 0 -+ * 0 : Interrupt cold threshold on sensor 0 -+ * -+ * We are interested in the sensor(s) responsible of the -+ * interrupt event. We update the thermal framework with the -+ * thermal zone associated with the sensor. The framework will -+ * take care of the rest whatever the kind of interrupt, we -+ * are only interested in which sensor raised the interrupt. -+ * -+ * sensor 3 interrupt: 0001 1111 1100 0000 0000 0000 0000 0000 -+ * => 0x1FC00000 -+ * sensor 2 interrupt: 0000 0000 0010 0100 0111 1100 0000 0000 -+ * => 0x00247C00 -+ * sensor 1 interrupt: 0000 0000 0001 0001 0000 0011 1110 0000 -+ * => 0X000881F0 -+ * sensor 0 interrupt: 0000 0000 0000 1001 0000 0000 0001 1111 -+ * => 0x0009001F -+ */ -+ value = readl(LVTS_MONINTSTS(lvts_ctrl->base)); -+ -+ /* -+ * Let's figure out which sensors raised the interrupt -+ * -+ * NOTE: the masks array must be ordered with the index -+ * corresponding to the sensor id eg. index=0, mask for -+ * sensor0. -+ */ -+ for (i = 0; i < ARRAY_SIZE(masks); i++) { -+ -+ if (!(value & masks[i])) -+ continue; -+ -+ thermal_zone_device_update(lvts_ctrl->sensors[i].tz, -+ THERMAL_TRIP_VIOLATED); -+ iret = IRQ_HANDLED; -+ } -+ -+ /* -+ * Write back to clear the interrupt status (W1C) -+ */ -+ writel(value, LVTS_MONINTSTS(lvts_ctrl->base)); -+ -+ return iret; -+} -+ -+/* -+ * Temperature interrupt handler. Even if the driver supports more -+ * interrupt modes, we use the interrupt when the temperature crosses -+ * the hot threshold the way up and the way down (modulo the -+ * hysteresis). -+ * -+ * Each thermal domain has a couple of interrupts, one for hardware -+ * reset and another one for all the thermal events happening on the -+ * different sensors. -+ * -+ * The interrupt is configured for thermal events when crossing the -+ * hot temperature limit. At each interrupt, we check in every -+ * controller if there is an interrupt pending. -+ */ -+static irqreturn_t lvts_irq_handler(int irq, void *data) -+{ -+ struct lvts_domain *lvts_td = data; -+ irqreturn_t aux, iret = IRQ_NONE; -+ int i; -+ -+ for (i = 0; i < lvts_td->num_lvts_ctrl; i++) { -+ -+ aux = lvts_ctrl_irq_handler(lvts_td->lvts_ctrl); -+ if (aux != IRQ_HANDLED) -+ continue; -+ -+ iret = IRQ_HANDLED; -+ } -+ -+ return iret; -+} -+ -+static struct thermal_zone_device_ops lvts_ops = { -+ .get_temp = lvts_get_temp, -+ .set_trips = lvts_set_trips, -+}; -+ -+static int lvts_sensor_init(struct device *dev, struct lvts_ctrl *lvts_ctrl, -+ const struct lvts_ctrl_data *lvts_ctrl_data) -+{ -+ struct lvts_sensor *lvts_sensor = lvts_ctrl->sensors; -+ void __iomem *msr_regs[] = { -+ LVTS_MSR0(lvts_ctrl->base), -+ LVTS_MSR1(lvts_ctrl->base), -+ LVTS_MSR2(lvts_ctrl->base), -+ LVTS_MSR3(lvts_ctrl->base) -+ }; -+ -+ void __iomem *imm_regs[] = { -+ LVTS_IMMD0(lvts_ctrl->base), -+ LVTS_IMMD1(lvts_ctrl->base), -+ LVTS_IMMD2(lvts_ctrl->base), -+ LVTS_IMMD3(lvts_ctrl->base) -+ }; -+ -+ int i; -+ -+ for (i = 0; i < lvts_ctrl_data->num_lvts_sensor; i++) { -+ -+ int dt_id = lvts_ctrl_data->lvts_sensor[i].dt_id; -+ -+ /* -+ * At this point, we don't know which id matches which -+ * sensor. Let's set arbitrally the id from the index. -+ */ -+ lvts_sensor[i].id = i; -+ -+ /* -+ * The thermal zone registration will set the trip -+ * point interrupt in the thermal controller -+ * register. But this one will be reset in the -+ * initialization after. So we need to post pone the -+ * thermal zone creation after the controller is -+ * setup. For this reason, we store the device tree -+ * node id from the data in the sensor structure -+ */ -+ lvts_sensor[i].dt_id = dt_id; -+ -+ /* -+ * We assign the base address of the thermal -+ * controller as a back pointer. So it will be -+ * accessible from the different thermal framework ops -+ * as we pass the lvts_sensor pointer as thermal zone -+ * private data. -+ */ -+ lvts_sensor[i].base = lvts_ctrl->base; -+ -+ /* -+ * Each sensor has its own register address to read from. -+ */ -+ lvts_sensor[i].msr = lvts_ctrl_data->mode == LVTS_MSR_IMMEDIATE_MODE ? -+ imm_regs[i] : msr_regs[i]; -+ }; -+ -+ lvts_ctrl->num_lvts_sensor = lvts_ctrl_data->num_lvts_sensor; -+ -+ return 0; -+} -+ -+/* -+ * The efuse blob values follows the sensor enumeration per thermal -+ * controller. The decoding of the stream is as follow: -+ * -+ * <--?-> <----big0 ???---> <-sensor0-> <-0-> -+ * ------------------------------------------ -+ * index in the stream: : | 0x0 | 0x1 | 0x2 | 0x3 | 0x4 | 0x5 | 0x6 | -+ * ------------------------------------------ -+ * -+ * <--sensor1--><-0-> <----big1 ???---> <-sen -+ * ------------------------------------------ -+ * | 0x7 | 0x8 | 0x9 | 0xA | 0xB | OxC | OxD | -+ * ------------------------------------------ -+ * -+ * sor0-> <-0-> <-sensor1-> <-0-> .......... -+ * ------------------------------------------ -+ * | 0x7 | 0x8 | 0x9 | 0xA | 0xB | OxC | OxD | -+ * ------------------------------------------ -+ * -+ * And so on ... -+ * -+ * The data description gives the offset of the calibration data in -+ * this bytes stream for each sensor. -+ * -+ * Each thermal controller can handle up to 4 sensors max, we don't -+ * care if there are less as the array of calibration is sized to 4 -+ * anyway. The unused sensor slot will be zeroed. -+ */ -+static int lvts_calibration_init(struct device *dev, struct lvts_ctrl *lvts_ctrl, -+ const struct lvts_ctrl_data *lvts_ctrl_data, -+ u8 *efuse_calibration) -+{ -+ int i; -+ -+ for (i = 0; i < lvts_ctrl_data->num_lvts_sensor; i++) -+ memcpy(&lvts_ctrl->calibration[i], -+ efuse_calibration + lvts_ctrl_data->cal_offset[i], 2); -+ -+ return 0; -+} -+ -+/* -+ * The efuse bytes stream can be split into different chunk of -+ * nvmems. This function reads and concatenate those into a single -+ * buffer so it can be read sequentially when initializing the -+ * calibration data. -+ */ -+static int lvts_calibration_read(struct device *dev, struct lvts_domain *lvts_td, -+ const struct lvts_data *lvts_data) -+{ -+ struct device_node *np = dev_of_node(dev); -+ struct nvmem_cell *cell; -+ struct property *prop; -+ const char *cell_name; -+ -+ of_property_for_each_string(np, "nvmem-cell-names", prop, cell_name) { -+ size_t len; -+ u8 *efuse; -+ -+ cell = of_nvmem_cell_get(np, cell_name); -+ if (IS_ERR(cell)) { -+ dev_err(dev, "Failed to get cell '%s'\n", cell_name); -+ return PTR_ERR(cell); -+ } -+ -+ efuse = nvmem_cell_read(cell, &len); -+ -+ nvmem_cell_put(cell); -+ -+ if (IS_ERR(efuse)) { -+ dev_err(dev, "Failed to read cell '%s'\n", cell_name); -+ return PTR_ERR(efuse); -+ } -+ -+ lvts_td->calib = devm_krealloc(dev, lvts_td->calib, -+ lvts_td->calib_len + len, GFP_KERNEL); -+ if (!lvts_td->calib) -+ return -ENOMEM; -+ -+ memcpy(lvts_td->calib + lvts_td->calib_len, efuse, len); -+ -+ lvts_td->calib_len += len; -+ -+ kfree(efuse); -+ } -+ -+ return 0; -+} -+ -+static int lvts_golden_temp_init(struct device *dev, u32 *value) -+{ -+ u32 gt; -+ -+ gt = (*value) >> 24; -+ -+ if (gt && gt < LVTS_GOLDEN_TEMP_MAX) -+ golden_temp = gt; -+ -+ coeff_b = golden_temp * 500 + LVTS_COEFF_B; -+ -+ return 0; -+} -+ -+static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td, -+ const struct lvts_data *lvts_data) -+{ -+ size_t size = sizeof(*lvts_td->lvts_ctrl) * lvts_data->num_lvts_ctrl; -+ struct lvts_ctrl *lvts_ctrl; -+ int i, ret; -+ -+ /* -+ * Create the calibration bytes stream from efuse data -+ */ -+ ret = lvts_calibration_read(dev, lvts_td, lvts_data); -+ if (ret) -+ return ret; -+ -+ /* -+ * The golden temp information is contained in the first chunk -+ * of efuse data. -+ */ -+ ret = lvts_golden_temp_init(dev, (u32 *)lvts_td->calib); -+ if (ret) -+ return ret; -+ -+ lvts_ctrl = devm_kzalloc(dev, size, GFP_KERNEL); -+ if (!lvts_ctrl) -+ return -ENOMEM; -+ -+ for (i = 0; i < lvts_data->num_lvts_ctrl; i++) { -+ -+ lvts_ctrl[i].base = lvts_td->base + lvts_data->lvts_ctrl[i].offset; -+ -+ ret = lvts_sensor_init(dev, &lvts_ctrl[i], -+ &lvts_data->lvts_ctrl[i]); -+ if (ret) -+ return ret; -+ -+ ret = lvts_calibration_init(dev, &lvts_ctrl[i], -+ &lvts_data->lvts_ctrl[i], -+ lvts_td->calib); -+ if (ret) -+ return ret; -+ -+ /* -+ * The mode the ctrl will use to read the temperature -+ * (filtered or immediate) -+ */ -+ lvts_ctrl[i].mode = lvts_data->lvts_ctrl[i].mode; -+ -+ /* -+ * The temperature to raw temperature must be done -+ * after initializing the calibration. -+ */ -+ lvts_ctrl[i].hw_tshut_raw_temp = -+ lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp); -+ } -+ -+ /* -+ * We no longer need the efuse bytes stream, let's free it -+ */ -+ devm_kfree(dev, lvts_td->calib); -+ -+ lvts_td->lvts_ctrl = lvts_ctrl; -+ lvts_td->num_lvts_ctrl = lvts_data->num_lvts_ctrl; -+ -+ return 0; -+} -+ -+/* -+ * At this point the configuration register is the only place in the -+ * driver where we write multiple values. Per hardware constraint, -+ * each write in the configuration register must be separated by a -+ * delay of 2 us. -+ */ -+static void lvts_write_config(struct lvts_ctrl *lvts_ctrl, u32 *cmds, int nr_cmds) -+{ -+ int i; -+ -+ /* -+ * Configuration register -+ */ -+ for (i = 0; i < nr_cmds; i++) { -+ writel(cmds[i], LVTS_CONFIG(lvts_ctrl->base)); -+ usleep_range(2, 4); -+ } -+} -+ -+static int lvts_irq_init(struct lvts_ctrl *lvts_ctrl) -+{ -+ /* -+ * LVTS_PROTCTL : Thermal Protection Sensor Selection -+ * -+ * Bits: -+ * -+ * 19-18 : Sensor to base the protection on -+ * 17-16 : Strategy: -+ * 00 : Average of 4 sensors -+ * 01 : Max of 4 sensors -+ * 10 : Selected sensor with bits 19-18 -+ * 11 : Reserved -+ */ -+ writel(BIT(16), LVTS_PROTCTL(lvts_ctrl->base)); -+ -+ /* -+ * LVTS_PROTTA : Stage 1 temperature threshold -+ * LVTS_PROTTB : Stage 2 temperature threshold -+ * LVTS_PROTTC : Stage 3 temperature threshold -+ * -+ * Bits: -+ * -+ * 14-0: Raw temperature threshold -+ * -+ * writel(0x0, LVTS_PROTTA(lvts_ctrl->base)); -+ * writel(0x0, LVTS_PROTTB(lvts_ctrl->base)); -+ */ -+ writel(lvts_ctrl->hw_tshut_raw_temp, LVTS_PROTTC(lvts_ctrl->base)); -+ -+ /* -+ * LVTS_MONINT : Interrupt configuration register -+ * -+ * The LVTS_MONINT register layout is the same as the LVTS_MONINTSTS -+ * register, except we set the bits to enable the interrupt. -+ */ -+ writel(LVTS_MONINT_CONF, LVTS_MONINT(lvts_ctrl->base)); -+ -+ return 0; -+} -+ -+static int lvts_domain_reset(struct device *dev, struct reset_control *reset) -+{ -+ int ret; -+ -+ ret = reset_control_assert(reset); -+ if (ret) -+ return ret; -+ -+ return reset_control_deassert(reset); -+} -+ -+/* -+ * Enable or disable the clocks of a specified thermal controller -+ */ -+static int lvts_ctrl_set_enable(struct lvts_ctrl *lvts_ctrl, int enable) -+{ -+ /* -+ * LVTS_CLKEN : Internal LVTS clock -+ * -+ * Bits: -+ * -+ * 0 : enable / disable clock -+ */ -+ writel(enable, LVTS_CLKEN(lvts_ctrl->base)); -+ -+ return 0; -+} -+ -+static int lvts_ctrl_connect(struct device *dev, struct lvts_ctrl *lvts_ctrl) -+{ -+ u32 id, cmds[] = { 0xC103FFFF, 0xC502FF55 }; -+ -+ lvts_write_config(lvts_ctrl, cmds, ARRAY_SIZE(cmds)); -+ -+ /* -+ * LVTS_ID : Get ID and status of the thermal controller -+ * -+ * Bits: -+ * -+ * 0-5 : thermal controller id -+ * 7 : thermal controller connection is valid -+ */ -+ id = readl(LVTS_ID(lvts_ctrl->base)); -+ if (!(id & BIT(7))) -+ return -EIO; -+ -+ return 0; -+} -+ -+static int lvts_ctrl_initialize(struct device *dev, struct lvts_ctrl *lvts_ctrl) -+{ -+ /* -+ * Write device mask: 0xC1030000 -+ */ -+ u32 cmds[] = { -+ 0xC1030E01, 0xC1030CFC, 0xC1030A8C, 0xC103098D, 0xC10308F1, -+ 0xC10307A6, 0xC10306B8, 0xC1030500, 0xC1030420, 0xC1030300, -+ 0xC1030030, 0xC10300F6, 0xC1030050, 0xC1030060, 0xC10300AC, -+ 0xC10300FC, 0xC103009D, 0xC10300F1, 0xC10300E1 -+ }; -+ -+ lvts_write_config(lvts_ctrl, cmds, ARRAY_SIZE(cmds)); -+ -+ return 0; -+} -+ -+static int lvts_ctrl_calibrate(struct device *dev, struct lvts_ctrl *lvts_ctrl) -+{ -+ int i; -+ void __iomem *lvts_edata[] = { -+ LVTS_EDATA00(lvts_ctrl->base), -+ LVTS_EDATA01(lvts_ctrl->base), -+ LVTS_EDATA02(lvts_ctrl->base), -+ LVTS_EDATA03(lvts_ctrl->base) -+ }; -+ -+ /* -+ * LVTS_EDATA0X : Efuse calibration reference value for sensor X -+ * -+ * Bits: -+ * -+ * 20-0 : Efuse value for normalization data -+ */ -+ for (i = 0; i < LVTS_SENSOR_MAX; i++) -+ writel(lvts_ctrl->calibration[i], lvts_edata[i]); -+ -+ return 0; -+} -+ -+static int lvts_ctrl_configure(struct device *dev, struct lvts_ctrl *lvts_ctrl) -+{ -+ u32 value; -+ -+ /* -+ * LVTS_TSSEL : Sensing point index numbering -+ * -+ * Bits: -+ * -+ * 31-24: ADC Sense 3 -+ * 23-16: ADC Sense 2 -+ * 15-8 : ADC Sense 1 -+ * 7-0 : ADC Sense 0 -+ */ -+ value = LVTS_TSSEL_CONF; -+ writel(value, LVTS_TSSEL(lvts_ctrl->base)); -+ -+ /* -+ * LVTS_CALSCALE : ADC voltage round -+ */ -+ value = 0x300; -+ value = LVTS_CALSCALE_CONF; -+ -+ /* -+ * LVTS_MSRCTL0 : Sensor filtering strategy -+ * -+ * Filters: -+ * -+ * 000 : One sample -+ * 001 : Avg 2 samples -+ * 010 : 4 samples, drop min and max, avg 2 samples -+ * 011 : 6 samples, drop min and max, avg 4 samples -+ * 100 : 10 samples, drop min and max, avg 8 samples -+ * 101 : 18 samples, drop min and max, avg 16 samples -+ * -+ * Bits: -+ * -+ * 0-2 : Sensor0 filter -+ * 3-5 : Sensor1 filter -+ * 6-8 : Sensor2 filter -+ * 9-11 : Sensor3 filter -+ */ -+ value = LVTS_HW_FILTER << 9 | LVTS_HW_FILTER << 6 | -+ LVTS_HW_FILTER << 3 | LVTS_HW_FILTER; -+ writel(value, LVTS_MSRCTL0(lvts_ctrl->base)); -+ -+ /* -+ * LVTS_MSRCTL1 : Measurement control -+ * -+ * Bits: -+ * -+ * 9: Ignore MSRCTL0 config and do immediate measurement on sensor3 -+ * 6: Ignore MSRCTL0 config and do immediate measurement on sensor2 -+ * 5: Ignore MSRCTL0 config and do immediate measurement on sensor1 -+ * 4: Ignore MSRCTL0 config and do immediate measurement on sensor0 -+ * -+ * That configuration will ignore the filtering and the delays -+ * introduced below in MONCTL1 and MONCTL2 -+ */ -+ if (lvts_ctrl->mode == LVTS_MSR_IMMEDIATE_MODE) { -+ value = BIT(9) | BIT(6) | BIT(5) | BIT(4); -+ writel(value, LVTS_MSRCTL1(lvts_ctrl->base)); -+ } -+ -+ /* -+ * LVTS_MONCTL1 : Period unit and group interval configuration -+ * -+ * The clock source of LVTS thermal controller is 26MHz. -+ * -+ * The period unit is a time base for all the interval delays -+ * specified in the registers. By default we use 12. The time -+ * conversion is done by multiplying by 256 and 1/26.10^6 -+ * -+ * An interval delay multiplied by the period unit gives the -+ * duration in seconds. -+ * -+ * - Filter interval delay is a delay between two samples of -+ * the same sensor. -+ * -+ * - Sensor interval delay is a delay between two samples of -+ * different sensors. -+ * -+ * - Group interval delay is a delay between different rounds. -+ * -+ * For example: -+ * If Period unit = C, filter delay = 1, sensor delay = 2, group delay = 1, -+ * and two sensors, TS1 and TS2, are in a LVTS thermal controller -+ * and then -+ * Period unit time = C * 1/26M * 256 = 12 * 38.46ns * 256 = 118.149us -+ * Filter interval delay = 1 * Period unit = 118.149us -+ * Sensor interval delay = 2 * Period unit = 236.298us -+ * Group interval delay = 1 * Period unit = 118.149us -+ * -+ * TS1 TS1 ... TS1 TS2 TS2 ... TS2 TS1... -+ * <--> Filter interval delay -+ * <--> Sensor interval delay -+ * <--> Group interval delay -+ * Bits: -+ * 29 - 20 : Group interval -+ * 16 - 13 : Send a single interrupt when crossing the hot threshold (1) -+ * or an interrupt everytime the hot threshold is crossed (0) -+ * 9 - 0 : Period unit -+ * -+ */ -+ value = LVTS_GROUP_INTERVAL << 20 | LVTS_PERIOD_UNIT; -+ writel(value, LVTS_MONCTL1(lvts_ctrl->base)); -+ -+ /* -+ * LVTS_MONCTL2 : Filtering and sensor interval -+ * -+ * Bits: -+ * -+ * 25-16 : Interval unit in PERIOD_UNIT between sample on -+ * the same sensor, filter interval -+ * 9-0 : Interval unit in PERIOD_UNIT between each sensor -+ * -+ */ -+ value = LVTS_FILTER_INTERVAL << 16 | LVTS_SENSOR_INTERVAL; -+ writel(value, LVTS_MONCTL2(lvts_ctrl->base)); -+ -+ return lvts_irq_init(lvts_ctrl); -+} -+ -+static int lvts_ctrl_start(struct device *dev, struct lvts_ctrl *lvts_ctrl) -+{ -+ struct lvts_sensor *lvts_sensors = lvts_ctrl->sensors; -+ struct thermal_zone_device *tz; -+ u32 sensor_map = 0; -+ int i; -+ -+ for (i = 0; i < lvts_ctrl->num_lvts_sensor; i++) { -+ -+ int dt_id = lvts_sensors[i].dt_id; -+ -+ tz = devm_thermal_of_zone_register(dev, dt_id, &lvts_sensors[i], -+ &lvts_ops); -+ if (IS_ERR(tz)) { -+ /* -+ * This thermal zone is not described in the -+ * device tree. It is not an error from the -+ * thermal OF code POV, we just continue. -+ */ -+ if (PTR_ERR(tz) == -ENODEV) -+ continue; -+ -+ return PTR_ERR(tz); -+ } -+ -+ /* -+ * The thermal zone pointer will be needed in the -+ * interrupt handler, we store it in the sensor -+ * structure. The thermal domain structure will be -+ * passed to the interrupt handler private data as the -+ * interrupt is shared for all the controller -+ * belonging to the thermal domain. -+ */ -+ lvts_sensors[i].tz = tz; -+ -+ /* -+ * This sensor was correctly associated with a thermal -+ * zone, let's set the corresponding bit in the sensor -+ * map, so we can enable the temperature monitoring in -+ * the hardware thermal controller. -+ */ -+ sensor_map |= BIT(i); -+ } -+ -+ /* -+ * Bits: -+ * 9: Single point access flow -+ * 0-3: Enable sensing point 0-3 -+ * -+ * The initialization of the thermal zones give us -+ * which sensor point to enable. If any thermal zone -+ * was not described in the device tree, it won't be -+ * enabled here in the sensor map. -+ */ -+ writel(sensor_map | BIT(9), LVTS_MONCTL0(lvts_ctrl->base)); -+ -+ return 0; -+} -+ -+static int lvts_domain_init(struct device *dev, struct lvts_domain *lvts_td, -+ const struct lvts_data *lvts_data) -+{ -+ struct lvts_ctrl *lvts_ctrl; -+ int i, ret; -+ -+ ret = lvts_ctrl_init(dev, lvts_td, lvts_data); -+ if (ret) -+ return ret; -+ -+ ret = lvts_domain_reset(dev, lvts_td->reset); -+ if (ret) { -+ dev_dbg(dev, "Failed to reset domain"); -+ return ret; -+ } -+ -+ for (i = 0; i < lvts_td->num_lvts_ctrl; i++) { -+ -+ lvts_ctrl = &lvts_td->lvts_ctrl[i]; -+ -+ /* -+ * Initialization steps: -+ * -+ * - Enable the clock -+ * - Connect to the LVTS -+ * - Initialize the LVTS -+ * - Prepare the calibration data -+ * - Select monitored sensors -+ * [ Configure sampling ] -+ * [ Configure the interrupt ] -+ * - Start measurement -+ */ -+ ret = lvts_ctrl_set_enable(lvts_ctrl, true); -+ if (ret) { -+ dev_dbg(dev, "Failed to enable LVTS clock"); -+ return ret; -+ } -+ -+ ret = lvts_ctrl_connect(dev, lvts_ctrl); -+ if (ret) { -+ dev_dbg(dev, "Failed to connect to LVTS controller"); -+ return ret; -+ } -+ -+ ret = lvts_ctrl_initialize(dev, lvts_ctrl); -+ if (ret) { -+ dev_dbg(dev, "Failed to initialize controller"); -+ return ret; -+ } -+ -+ ret = lvts_ctrl_calibrate(dev, lvts_ctrl); -+ if (ret) { -+ dev_dbg(dev, "Failed to calibrate controller"); -+ return ret; -+ } -+ -+ ret = lvts_ctrl_configure(dev, lvts_ctrl); -+ if (ret) { -+ dev_dbg(dev, "Failed to configure controller"); -+ return ret; -+ } -+ -+ ret = lvts_ctrl_start(dev, lvts_ctrl); -+ if (ret) { -+ dev_dbg(dev, "Failed to start controller"); -+ return ret; -+ } -+ } -+ -+ return lvts_debugfs_init(dev, lvts_td); -+} -+ -+static int lvts_probe(struct platform_device *pdev) -+{ -+ const struct lvts_data *lvts_data; -+ struct lvts_domain *lvts_td; -+ struct device *dev = &pdev->dev; -+ struct resource *res; -+ int irq, ret; -+ -+ lvts_td = devm_kzalloc(dev, sizeof(*lvts_td), GFP_KERNEL); -+ if (!lvts_td) -+ return -ENOMEM; -+ -+ lvts_data = of_device_get_match_data(dev); -+ -+ lvts_td->clk = devm_clk_get_enabled(dev, NULL); -+ if (IS_ERR(lvts_td->clk)) -+ return dev_err_probe(dev, PTR_ERR(lvts_td->clk), "Failed to retrieve clock\n"); -+ -+ res = platform_get_mem_or_io(pdev, 0); -+ if (!res) -+ return dev_err_probe(dev, (-ENXIO), "No IO resource\n"); -+ -+ lvts_td->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); -+ if (IS_ERR(lvts_td->base)) -+ return dev_err_probe(dev, PTR_ERR(lvts_td->base), "Failed to map io resource\n"); -+ -+ lvts_td->reset = devm_reset_control_get_by_index(dev, 0); -+ if (IS_ERR(lvts_td->reset)) -+ return dev_err_probe(dev, PTR_ERR(lvts_td->reset), "Failed to get reset control\n"); -+ -+ irq = platform_get_irq(pdev, 0); -+ if (irq < 0) -+ return dev_err_probe(dev, irq, "No irq resource\n"); -+ -+ ret = lvts_domain_init(dev, lvts_td, lvts_data); -+ if (ret) -+ return dev_err_probe(dev, ret, "Failed to initialize the lvts domain\n"); -+ -+ /* -+ * At this point the LVTS is initialized and enabled. We can -+ * safely enable the interrupt. -+ */ -+ ret = devm_request_threaded_irq(dev, irq, NULL, lvts_irq_handler, -+ IRQF_ONESHOT, dev_name(dev), lvts_td); -+ if (ret) -+ return dev_err_probe(dev, ret, "Failed to request interrupt\n"); -+ -+ platform_set_drvdata(pdev, lvts_td); -+ -+ return 0; -+} -+ -+static int lvts_remove(struct platform_device *pdev) -+{ -+ struct lvts_domain *lvts_td; -+ int i; -+ -+ lvts_td = platform_get_drvdata(pdev); -+ -+ for (i = 0; i < lvts_td->num_lvts_ctrl; i++) -+ lvts_ctrl_set_enable(&lvts_td->lvts_ctrl[i], false); -+ -+ lvts_debugfs_exit(lvts_td); -+ -+ return 0; -+} -+ -+static const struct lvts_ctrl_data mt8195_lvts_data_ctrl[] = { -+ { -+ .cal_offset = { 0x04, 0x07 }, -+ .lvts_sensor = { -+ { .dt_id = MT8195_MCU_BIG_CPU0 }, -+ { .dt_id = MT8195_MCU_BIG_CPU1 } -+ }, -+ .num_lvts_sensor = 2, -+ .offset = 0x0, -+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195, -+ }, -+ { -+ .cal_offset = { 0x0d, 0x10 }, -+ .lvts_sensor = { -+ { .dt_id = MT8195_MCU_BIG_CPU2 }, -+ { .dt_id = MT8195_MCU_BIG_CPU3 } -+ }, -+ .num_lvts_sensor = 2, -+ .offset = 0x100, -+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195, -+ }, -+ { -+ .cal_offset = { 0x16, 0x19, 0x1c, 0x1f }, -+ .lvts_sensor = { -+ { .dt_id = MT8195_MCU_LITTLE_CPU0 }, -+ { .dt_id = MT8195_MCU_LITTLE_CPU1 }, -+ { .dt_id = MT8195_MCU_LITTLE_CPU2 }, -+ { .dt_id = MT8195_MCU_LITTLE_CPU3 } -+ }, -+ .num_lvts_sensor = 4, -+ .offset = 0x200, -+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195, -+ } -+}; -+ -+static const struct lvts_data mt8195_lvts_mcu_data = { -+ .lvts_ctrl = mt8195_lvts_data_ctrl, -+ .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_data_ctrl), -+}; -+ -+static const struct of_device_id lvts_of_match[] = { -+ { .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, lvts_of_match); -+ -+static struct platform_driver lvts_driver = { -+ .probe = lvts_probe, -+ .remove = lvts_remove, -+ .driver = { -+ .name = "mtk-lvts-thermal", -+ .of_match_table = lvts_of_match, -+ }, -+}; -+module_platform_driver(lvts_driver); -+ -+MODULE_AUTHOR("Balsam CHIHI "); -+MODULE_DESCRIPTION("MediaTek LVTS Thermal Driver"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-07-dt-bindings-thermal-mediatek-Add-LVTS-thermal-contro.patch b/target/linux/mediatek/patches-6.1/830-v6.4-07-dt-bindings-thermal-mediatek-Add-LVTS-thermal-contro.patch deleted file mode 100644 index b6a5f640901..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-07-dt-bindings-thermal-mediatek-Add-LVTS-thermal-contro.patch +++ /dev/null @@ -1,186 +0,0 @@ -From 498e2f7a6e69dcbca24715de2b4b97569fdfeff4 Mon Sep 17 00:00:00 2001 -From: Balsam CHIHI -Date: Thu, 9 Feb 2023 11:56:24 +0100 -Subject: [PATCH] dt-bindings: thermal: mediatek: Add LVTS thermal controllers - -Add LVTS thermal controllers dt-binding definition for mt8192 and mt8195. - -Signed-off-by: Balsam CHIHI -Reviewed-by: Rob Herring -Link: https://lore.kernel.org/r/20230209105628.50294-3-bchihi@baylibre.com -Signed-off-by: Daniel Lezcano -Signed-off-by: Rafael J. Wysocki ---- - .../thermal/mediatek,lvts-thermal.yaml | 142 ++++++++++++++++++ - .../thermal/mediatek,lvts-thermal.h | 19 +++ - 2 files changed, 161 insertions(+) - create mode 100644 Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml - create mode 100644 include/dt-bindings/thermal/mediatek,lvts-thermal.h - ---- /dev/null -+++ b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml -@@ -0,0 +1,142 @@ -+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/thermal/mediatek,lvts-thermal.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: MediaTek SoC Low Voltage Thermal Sensor (LVTS) -+ -+maintainers: -+ - Balsam CHIHI -+ -+description: | -+ LVTS is a thermal management architecture composed of three subsystems, -+ a Sensing device - Thermal Sensing Micro Circuit Unit (TSMCU), -+ a Converter - Low Voltage Thermal Sensor converter (LVTS), and -+ a Digital controller (LVTS_CTRL). -+ -+properties: -+ compatible: -+ enum: -+ - mediatek,mt8192-lvts-ap -+ - mediatek,mt8192-lvts-mcu -+ - mediatek,mt8195-lvts-ap -+ - mediatek,mt8195-lvts-mcu -+ -+ reg: -+ maxItems: 1 -+ -+ interrupts: -+ maxItems: 1 -+ -+ clocks: -+ maxItems: 1 -+ -+ resets: -+ maxItems: 1 -+ description: LVTS reset for clearing temporary data on AP/MCU. -+ -+ nvmem-cells: -+ minItems: 1 -+ items: -+ - description: Calibration eFuse data 1 for LVTS -+ - description: Calibration eFuse data 2 for LVTS -+ -+ nvmem-cell-names: -+ minItems: 1 -+ items: -+ - const: lvts-calib-data-1 -+ - const: lvts-calib-data-2 -+ -+ "#thermal-sensor-cells": -+ const: 1 -+ -+allOf: -+ - $ref: thermal-sensor.yaml# -+ -+ - if: -+ properties: -+ compatible: -+ contains: -+ enum: -+ - mediatek,mt8192-lvts-ap -+ - mediatek,mt8192-lvts-mcu -+ then: -+ properties: -+ nvmem-cells: -+ maxItems: 1 -+ -+ nvmem-cell-names: -+ maxItems: 1 -+ -+ - if: -+ properties: -+ compatible: -+ contains: -+ enum: -+ - mediatek,mt8195-lvts-ap -+ - mediatek,mt8195-lvts-mcu -+ then: -+ properties: -+ nvmem-cells: -+ minItems: 2 -+ -+ nvmem-cell-names: -+ minItems: 2 -+ -+required: -+ - compatible -+ - reg -+ - interrupts -+ - clocks -+ - resets -+ - nvmem-cells -+ - nvmem-cell-names -+ - "#thermal-sensor-cells" -+ -+additionalProperties: false -+ -+examples: -+ - | -+ #include -+ #include -+ #include -+ #include -+ -+ soc { -+ #address-cells = <2>; -+ #size-cells = <2>; -+ -+ lvts_mcu: thermal-sensor@11278000 { -+ compatible = "mediatek,mt8195-lvts-mcu"; -+ reg = <0 0x11278000 0 0x1000>; -+ interrupts = ; -+ clocks = <&infracfg_ao CLK_INFRA_AO_THERM>; -+ resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>; -+ nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>; -+ nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2"; -+ #thermal-sensor-cells = <1>; -+ }; -+ }; -+ -+ thermal_zones: thermal-zones { -+ cpu0-thermal { -+ polling-delay = <1000>; -+ polling-delay-passive = <250>; -+ thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU0>; -+ -+ trips { -+ cpu0_alert: trip-alert { -+ temperature = <85000>; -+ hysteresis = <2000>; -+ type = "passive"; -+ }; -+ -+ cpu0_crit: trip-crit { -+ temperature = <100000>; -+ hysteresis = <2000>; -+ type = "critical"; -+ }; -+ }; -+ }; -+ }; ---- /dev/null -+++ b/include/dt-bindings/thermal/mediatek,lvts-thermal.h -@@ -0,0 +1,19 @@ -+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ -+/* -+ * Copyright (c) 2023 MediaTek Inc. -+ * Author: Balsam CHIHI -+ */ -+ -+#ifndef __MEDIATEK_LVTS_DT_H -+#define __MEDIATEK_LVTS_DT_H -+ -+#define MT8195_MCU_BIG_CPU0 0 -+#define MT8195_MCU_BIG_CPU1 1 -+#define MT8195_MCU_BIG_CPU2 2 -+#define MT8195_MCU_BIG_CPU3 3 -+#define MT8195_MCU_LITTLE_CPU0 4 -+#define MT8195_MCU_LITTLE_CPU1 5 -+#define MT8195_MCU_LITTLE_CPU2 6 -+#define MT8195_MCU_LITTLE_CPU3 7 -+ -+#endif /* __MEDIATEK_LVTS_DT_H */ diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-08-dt-bindings-thermal-mediatek-Add-AP-domain-to-LVTS-t.patch b/target/linux/mediatek/patches-6.1/830-v6.4-08-dt-bindings-thermal-mediatek-Add-AP-domain-to-LVTS-t.patch deleted file mode 100644 index efb0d8b64fb..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-08-dt-bindings-thermal-mediatek-Add-AP-domain-to-LVTS-t.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 05aaa7fdb0736262e224369b9b9f1410320fc71b Mon Sep 17 00:00:00 2001 -From: Balsam CHIHI -Date: Tue, 7 Mar 2023 16:45:21 +0100 -Subject: [PATCH] dt-bindings: thermal: mediatek: Add AP domain to LVTS thermal - controllers for mt8195 - -Add AP Domain to LVTS thermal controllers dt-binding definition for mt8195. - -Signed-off-by: Balsam CHIHI -Acked-by: Rob Herring -Reviewed-by: AngeloGioacchino Del Regno -Tested-by: Chen-Yu Tsai -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230307154524.118541-2-bchihi@baylibre.com ---- - include/dt-bindings/thermal/mediatek,lvts-thermal.h | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/include/dt-bindings/thermal/mediatek,lvts-thermal.h -+++ b/include/dt-bindings/thermal/mediatek,lvts-thermal.h -@@ -16,4 +16,14 @@ - #define MT8195_MCU_LITTLE_CPU2 6 - #define MT8195_MCU_LITTLE_CPU3 7 - -+#define MT8195_AP_VPU0 8 -+#define MT8195_AP_VPU1 9 -+#define MT8195_AP_GPU0 10 -+#define MT8195_AP_GPU1 11 -+#define MT8195_AP_VDEC 12 -+#define MT8195_AP_IMG 13 -+#define MT8195_AP_INFRA 14 -+#define MT8195_AP_CAM0 15 -+#define MT8195_AP_CAM1 16 -+ - #endif /* __MEDIATEK_LVTS_DT_H */ diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-09-thermal-core-Add-a-thermal-zone-devdata-accessor.patch b/target/linux/mediatek/patches-6.1/830-v6.4-09-thermal-core-Add-a-thermal-zone-devdata-accessor.patch deleted file mode 100644 index c68969321e5..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-09-thermal-core-Add-a-thermal-zone-devdata-accessor.patch +++ /dev/null @@ -1,65 +0,0 @@ -From a6ff3c0021468721b96e84892a8cae24bde8d65f Mon Sep 17 00:00:00 2001 -From: Daniel Lezcano -Date: Wed, 1 Mar 2023 21:14:29 +0100 -Subject: [PATCH] thermal/core: Add a thermal zone 'devdata' accessor - -The thermal zone device structure is exposed to the different drivers -and obviously they access the internals while that should be -restricted to the core thermal code. - -In order to self-encapsulate the thermal core code, we need to prevent -the drivers accessing directly the thermal zone structure and provide -accessor functions to deal with. - -Provide an accessor to the 'devdata' structure and make use of it in -the different drivers. - -No functional changes intended. - -Signed-off-by: Daniel Lezcano -Acked-by: Rafael J. Wysocki -Acked-by: Mark Brown -Signed-off-by: Rafael J. Wysocki ---- - drivers/thermal/thermal_core.c | 6 ++++++ - include/linux/thermal.h | 7 +++++++ - 2 files changed, 13 insertions(+) - ---- a/drivers/thermal/thermal_core.c -+++ b/drivers/thermal/thermal_core.c -@@ -1346,6 +1346,12 @@ struct thermal_zone_device *thermal_zone - } - EXPORT_SYMBOL_GPL(thermal_zone_device_register); - -+void *thermal_zone_device_priv(struct thermal_zone_device *tzd) -+{ -+ return tzd->devdata; -+} -+EXPORT_SYMBOL_GPL(thermal_zone_device_priv); -+ - /** - * thermal_zone_device_unregister - removes the registered thermal zone device - * @tz: the thermal zone device to remove ---- a/include/linux/thermal.h -+++ b/include/linux/thermal.h -@@ -346,6 +346,8 @@ thermal_zone_device_register_with_trips( - void *, struct thermal_zone_device_ops *, - struct thermal_zone_params *, int, int); - -+void *thermal_zone_device_priv(struct thermal_zone_device *tzd); -+ - int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, - struct thermal_cooling_device *, - unsigned long, unsigned long, -@@ -417,6 +419,11 @@ static inline int thermal_zone_get_offse - struct thermal_zone_device *tz) - { return -ENODEV; } - -+static inline void *thermal_zone_device_priv(struct thermal_zone_device *tz) -+{ -+ return NULL; -+} -+ - static inline int thermal_zone_device_enable(struct thermal_zone_device *tz) - { return -ENODEV; } - diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-10-thermal-core-Add-thermal_zone_device-structure-type-.patch b/target/linux/mediatek/patches-6.1/830-v6.4-10-thermal-core-Add-thermal_zone_device-structure-type-.patch deleted file mode 100644 index 66d3c9e3028..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-10-thermal-core-Add-thermal_zone_device-structure-type-.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 072e35c98806100182c0a7263cf4cba09ce43463 Mon Sep 17 00:00:00 2001 -From: Daniel Lezcano -Date: Wed, 1 Mar 2023 21:14:38 +0100 -Subject: [PATCH] thermal/core: Add thermal_zone_device structure 'type' - accessor - -The thermal zone device structure is exposed via the exported -thermal.h header. This structure should stay private the thermal core -code. In order to encapsulate the structure, let's add an accessor to -get the 'type' of the thermal zone. - -Signed-off-by: Daniel Lezcano -Signed-off-by: Rafael J. Wysocki ---- - drivers/thermal/thermal_core.c | 6 ++++++ - include/linux/thermal.h | 6 ++++++ - 2 files changed, 12 insertions(+) - ---- a/drivers/thermal/thermal_core.c -+++ b/drivers/thermal/thermal_core.c -@@ -1352,6 +1352,12 @@ void *thermal_zone_device_priv(struct th - } - EXPORT_SYMBOL_GPL(thermal_zone_device_priv); - -+const char *thermal_zone_device_type(struct thermal_zone_device *tzd) -+{ -+ return tzd->type; -+} -+EXPORT_SYMBOL_GPL(thermal_zone_device_type); -+ - /** - * thermal_zone_device_unregister - removes the registered thermal zone device - * @tz: the thermal zone device to remove ---- a/include/linux/thermal.h -+++ b/include/linux/thermal.h -@@ -347,6 +347,7 @@ thermal_zone_device_register_with_trips( - struct thermal_zone_params *, int, int); - - void *thermal_zone_device_priv(struct thermal_zone_device *tzd); -+const char *thermal_zone_device_type(struct thermal_zone_device *tzd); - - int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, - struct thermal_cooling_device *, -@@ -423,6 +424,11 @@ static inline void *thermal_zone_device_ - { - return NULL; - } -+ -+static inline const char *thermal_zone_device_type(struct thermal_zone_device *tzd) -+{ -+ return NULL; -+} - - static inline int thermal_zone_device_enable(struct thermal_zone_device *tz) - { return -ENODEV; } diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-11-thermal-core-Use-the-thermal-zone-devdata-accessor-i.patch b/target/linux/mediatek/patches-6.1/830-v6.4-11-thermal-core-Use-the-thermal-zone-devdata-accessor-i.patch deleted file mode 100644 index 57bc910d3e3..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-11-thermal-core-Use-the-thermal-zone-devdata-accessor-i.patch +++ /dev/null @@ -1,74 +0,0 @@ -From 7d78bab533eb9aa0e5240e25a204e8f416723ed6 Mon Sep 17 00:00:00 2001 -From: Daniel Lezcano -Date: Wed, 1 Mar 2023 21:14:30 +0100 -Subject: [PATCH 07/42] thermal/core: Use the thermal zone 'devdata' accessor - in thermal located drivers -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The thermal zone device structure is exposed to the different drivers -and obviously they access the internals while that should be -restricted to the core thermal code. - -In order to self-encapsulate the thermal core code, we need to prevent -the drivers accessing directly the thermal zone structure and provide -accessor functions to deal with. - -Use the devdata accessor introduced in the previous patch. - -No functional changes intended. - -[skipped drivers not relevant for mediatek target] - -Signed-off-by: Daniel Lezcano -Reviewed-by: Niklas Söderlund #R-Car -Acked-by: Mark Brown -Reviewed-by: AngeloGioacchino Del Regno #MediaTek auxadc and lvts -Reviewed-by: Balsam CHIHI #Mediatek lvts -Reviewed-by: Adam Ward #da9062 -Reviewed-by: Baolin Wang #spread -Acked-by: Jernej Skrabec #sun8i_thermal -Acked-by: Rafael J. Wysocki -Acked-by: Florian Fainelli #Broadcom -Reviewed-by: Dhruva Gole # K3 bandgap -Acked-by: Linus Walleij -Acked-by: Heiko Stuebner #rockchip -Reviewed-by: Kunihiko Hayashi #uniphier -Signed-off-by: Rafael J. Wysocki ---- - drivers/thermal/mediatek/auxadc_thermal.c | 2 +- - drivers/thermal/mediatek/lvts_thermal.c | 4 ++-- - 43 files changed, 71 insertions(+), 73 deletions(-) - ---- a/drivers/thermal/mediatek/auxadc_thermal.c -+++ b/drivers/thermal/mediatek/auxadc_thermal.c -@@ -763,7 +763,7 @@ static int mtk_thermal_bank_temperature( - - static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature) - { -- struct mtk_thermal *mt = tz->devdata; -+ struct mtk_thermal *mt = thermal_zone_device_priv(tz); - int i; - int tempmax = INT_MIN; - ---- a/drivers/thermal/mediatek/lvts_thermal.c -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -252,7 +252,7 @@ static u32 lvts_temp_to_raw(int temperat - - static int lvts_get_temp(struct thermal_zone_device *tz, int *temp) - { -- struct lvts_sensor *lvts_sensor = tz->devdata; -+ struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz); - void __iomem *msr = lvts_sensor->msr; - u32 value; - -@@ -290,7 +290,7 @@ static int lvts_get_temp(struct thermal_ - - static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high) - { -- struct lvts_sensor *lvts_sensor = tz->devdata; -+ struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz); - void __iomem *base = lvts_sensor->base; - u32 raw_low = lvts_temp_to_raw(low); - u32 raw_high = lvts_temp_to_raw(high); diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-12-thermal-hwmon-Use-the-right-device-for-devm_thermal_.patch b/target/linux/mediatek/patches-6.1/830-v6.4-12-thermal-hwmon-Use-the-right-device-for-devm_thermal_.patch deleted file mode 100644 index 647b3b0eca1..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-12-thermal-hwmon-Use-the-right-device-for-devm_thermal_.patch +++ /dev/null @@ -1,201 +0,0 @@ -From cc9c60e9cfeeac45d63361fa8c085c43c4bdfe3a Mon Sep 17 00:00:00 2001 -From: Daniel Lezcano -Date: Wed, 1 Mar 2023 21:14:36 +0100 -Subject: [PATCH 08/42] thermal/hwmon: Use the right device for - devm_thermal_add_hwmon_sysfs() - -The devres variant of thermal_add_hwmon_sysfs() only takes the thermal -zone structure pointer as parameter. - -Actually, it uses the tz->device to add it in the devres list. - -It is preferable to use the device registering the thermal zone -instead of the thermal zone device itself. That prevents the driver -accessing the thermal zone structure internals and it is from my POV -more correct regarding how devm_ is used. - -[skipped imx thermal which did not apply cleanly and irrelevant on -mediatek target] - -Signed-off-by: Daniel Lezcano -Acked-by: Martin Blumenstingl #amlogic_thermal -Acked-by: Jernej Skrabec #sun8i_thermal -Reviewed-by: AngeloGioacchino Del Regno #MediaTek auxadc -Signed-off-by: Rafael J. Wysocki ---- - drivers/thermal/amlogic_thermal.c | 2 +- - drivers/thermal/imx_sc_thermal.c | 2 +- - drivers/thermal/k3_bandgap.c | 2 +- - drivers/thermal/mediatek/auxadc_thermal.c | 2 +- - drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 2 +- - drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 2 +- - drivers/thermal/qcom/tsens.c | 2 +- - drivers/thermal/qoriq_thermal.c | 2 +- - drivers/thermal/sun8i_thermal.c | 2 +- - drivers/thermal/tegra/tegra30-tsensor.c | 2 +- - drivers/thermal/thermal_hwmon.c | 4 ++-- - drivers/thermal/thermal_hwmon.h | 4 ++-- - drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 2 +- - 13 files changed, 15 insertions(+), 15 deletions(-) - ---- a/drivers/thermal/amlogic_thermal.c -+++ b/drivers/thermal/amlogic_thermal.c -@@ -286,7 +286,7 @@ static int amlogic_thermal_probe(struct - return ret; - } - -- if (devm_thermal_add_hwmon_sysfs(pdata->tzd)) -+ if (devm_thermal_add_hwmon_sysfs(&pdev->dev, pdata->tzd)) - dev_warn(&pdev->dev, "Failed to add hwmon sysfs attributes\n"); - - ret = amlogic_thermal_initialize(pdata); ---- a/drivers/thermal/imx_sc_thermal.c -+++ b/drivers/thermal/imx_sc_thermal.c -@@ -120,7 +120,7 @@ static int imx_sc_thermal_probe(struct p - return ret; - } - -- if (devm_thermal_add_hwmon_sysfs(sensor->tzd)) -+ if (devm_thermal_add_hwmon_sysfs(&pdev->dev, sensor->tzd)) - dev_warn(&pdev->dev, "failed to add hwmon sysfs attributes\n"); - } - ---- a/drivers/thermal/k3_bandgap.c -+++ b/drivers/thermal/k3_bandgap.c -@@ -222,7 +222,7 @@ static int k3_bandgap_probe(struct platf - goto err_alloc; - } - -- if (devm_thermal_add_hwmon_sysfs(data[id].tzd)) -+ if (devm_thermal_add_hwmon_sysfs(dev, data[id].tzd)) - dev_warn(dev, "Failed to add hwmon sysfs attributes\n"); - } - ---- a/drivers/thermal/mediatek/auxadc_thermal.c -+++ b/drivers/thermal/mediatek/auxadc_thermal.c -@@ -1210,7 +1210,7 @@ static int mtk_thermal_probe(struct plat - goto err_disable_clk_peri_therm; - } - -- ret = devm_thermal_add_hwmon_sysfs(tzdev); -+ ret = devm_thermal_add_hwmon_sysfs(&pdev->dev, tzdev); - if (ret) - dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs"); - ---- a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c -+++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c -@@ -688,7 +688,7 @@ static int adc_tm5_register_tzd(struct a - return PTR_ERR(tzd); - } - adc_tm->channels[i].tzd = tzd; -- if (devm_thermal_add_hwmon_sysfs(tzd)) -+ if (devm_thermal_add_hwmon_sysfs(adc_tm->dev, tzd)) - dev_warn(adc_tm->dev, - "Failed to add hwmon sysfs attributes\n"); - } ---- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c -+++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c -@@ -460,7 +460,7 @@ static int qpnp_tm_probe(struct platform - return ret; - } - -- if (devm_thermal_add_hwmon_sysfs(chip->tz_dev)) -+ if (devm_thermal_add_hwmon_sysfs(&pdev->dev, chip->tz_dev)) - dev_warn(&pdev->dev, - "Failed to add hwmon sysfs attributes\n"); - ---- a/drivers/thermal/qcom/tsens.c -+++ b/drivers/thermal/qcom/tsens.c -@@ -1056,7 +1056,7 @@ static int tsens_register(struct tsens_p - if (priv->ops->enable) - priv->ops->enable(priv, i); - -- if (devm_thermal_add_hwmon_sysfs(tzd)) -+ if (devm_thermal_add_hwmon_sysfs(priv->dev, tzd)) - dev_warn(priv->dev, - "Failed to add hwmon sysfs attributes\n"); - } ---- a/drivers/thermal/qoriq_thermal.c -+++ b/drivers/thermal/qoriq_thermal.c -@@ -158,7 +158,7 @@ static int qoriq_tmu_register_tmu_zone(s - return ret; - } - -- if (devm_thermal_add_hwmon_sysfs(tzd)) -+ if (devm_thermal_add_hwmon_sysfs(dev, tzd)) - dev_warn(dev, - "Failed to add hwmon sysfs attributes\n"); - ---- a/drivers/thermal/sun8i_thermal.c -+++ b/drivers/thermal/sun8i_thermal.c -@@ -468,7 +468,7 @@ static int sun8i_ths_register(struct ths - if (IS_ERR(tmdev->sensor[i].tzd)) - return PTR_ERR(tmdev->sensor[i].tzd); - -- if (devm_thermal_add_hwmon_sysfs(tmdev->sensor[i].tzd)) -+ if (devm_thermal_add_hwmon_sysfs(tmdev->dev, tmdev->sensor[i].tzd)) - dev_warn(tmdev->dev, - "Failed to add hwmon sysfs attributes\n"); - } ---- a/drivers/thermal/tegra/tegra30-tsensor.c -+++ b/drivers/thermal/tegra/tegra30-tsensor.c -@@ -530,7 +530,7 @@ static int tegra_tsensor_register_channe - return 0; - } - -- if (devm_thermal_add_hwmon_sysfs(tsc->tzd)) -+ if (devm_thermal_add_hwmon_sysfs(ts->dev, tsc->tzd)) - dev_warn(ts->dev, "failed to add hwmon sysfs attributes\n"); - - return 0; ---- a/drivers/thermal/thermal_hwmon.c -+++ b/drivers/thermal/thermal_hwmon.c -@@ -255,7 +255,7 @@ static void devm_thermal_hwmon_release(s - thermal_remove_hwmon_sysfs(*(struct thermal_zone_device **)res); - } - --int devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) -+int devm_thermal_add_hwmon_sysfs(struct device *dev, struct thermal_zone_device *tz) - { - struct thermal_zone_device **ptr; - int ret; -@@ -272,7 +272,7 @@ int devm_thermal_add_hwmon_sysfs(struct - } - - *ptr = tz; -- devres_add(&tz->device, ptr); -+ devres_add(dev, ptr); - - return ret; - } ---- a/drivers/thermal/thermal_hwmon.h -+++ b/drivers/thermal/thermal_hwmon.h -@@ -17,7 +17,7 @@ - - #ifdef CONFIG_THERMAL_HWMON - int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz); --int devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz); -+int devm_thermal_add_hwmon_sysfs(struct device *dev, struct thermal_zone_device *tz); - void thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz); - #else - static inline int -@@ -27,7 +27,7 @@ thermal_add_hwmon_sysfs(struct thermal_z - } - - static inline int --devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) -+devm_thermal_add_hwmon_sysfs(struct device *dev, struct thermal_zone_device *tz) - { - return 0; - } ---- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c -+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c -@@ -182,7 +182,7 @@ int ti_thermal_expose_sensor(struct ti_b - ti_bandgap_set_sensor_data(bgp, id, data); - ti_bandgap_write_update_interval(bgp, data->sensor_id, interval); - -- if (devm_thermal_add_hwmon_sysfs(data->ti_thermal)) -+ if (devm_thermal_add_hwmon_sysfs(bgp->dev, data->ti_thermal)) - dev_warn(bgp->dev, "failed to add hwmon sysfs attributes\n"); - - return 0; diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-13-thermal-Don-t-use-device-internal-thermal-zone-struc.patch b/target/linux/mediatek/patches-6.1/830-v6.4-13-thermal-Don-t-use-device-internal-thermal-zone-struc.patch deleted file mode 100644 index 9dedc2cb685..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-13-thermal-Don-t-use-device-internal-thermal-zone-struc.patch +++ /dev/null @@ -1,79 +0,0 @@ -From 5a72b8e4bac753e4dc74dc0a1335d120f63df97a Mon Sep 17 00:00:00 2001 -From: Daniel Lezcano -Date: Wed, 1 Mar 2023 21:14:37 +0100 -Subject: [PATCH 09/42] thermal: Don't use 'device' internal thermal zone - structure field - -Some drivers are directly using the thermal zone's 'device' structure -field. - -Use the driver device pointer instead of the thermal zone device when -it is available. - -Remove the traces when they are duplicate with the traces in the core -code. - -[again skipped imx_thermal.c] - -Cc: Jean Delvare -Cc: Guenter Roeck -Signed-off-by: Daniel Lezcano -Reviewed-by: Balsam CHIHI #Mediatek LVTS -Reviewed-by: AngeloGioacchino Del Regno #MediaTek LVTS -Signed-off-by: Rafael J. Wysocki ---- - drivers/thermal/mediatek/lvts_thermal.c | 4 ++-- - drivers/thermal/thermal_hwmon.c | 4 ++-- - drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 2 +- - 3 files changed, 5 insertions(+), 5 deletions(-) - ---- a/drivers/thermal/mediatek/lvts_thermal.c -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -305,7 +305,7 @@ static int lvts_set_trips(struct thermal - * 14-0 : Raw temperature for threshold - */ - if (low != -INT_MAX) { -- dev_dbg(&tz->device, "Setting low limit temperature interrupt: %d\n", low); -+ pr_debug("%s: Setting low limit temperature interrupt: %d\n", tz->type, low); - writel(raw_low, LVTS_H2NTHRE(base)); - } - -@@ -318,7 +318,7 @@ static int lvts_set_trips(struct thermal - * - * 14-0 : Raw temperature for threshold - */ -- dev_dbg(&tz->device, "Setting high limit temperature interrupt: %d\n", high); -+ pr_debug("%s: Setting high limit temperature interrupt: %d\n", tz->type, high); - writel(raw_high, LVTS_HTHRE(base)); - - return 0; ---- a/drivers/thermal/thermal_hwmon.c -+++ b/drivers/thermal/thermal_hwmon.c -@@ -220,14 +220,14 @@ void thermal_remove_hwmon_sysfs(struct t - hwmon = thermal_hwmon_lookup_by_type(tz); - if (unlikely(!hwmon)) { - /* Should never happen... */ -- dev_dbg(&tz->device, "hwmon device lookup failed!\n"); -+ dev_dbg(hwmon->device, "hwmon device lookup failed!\n"); - return; - } - - temp = thermal_hwmon_lookup_temp(hwmon, tz); - if (unlikely(!temp)) { - /* Should never happen... */ -- dev_dbg(&tz->device, "temperature input lookup failed!\n"); -+ dev_dbg(hwmon->device, "temperature input lookup failed!\n"); - return; - } - ---- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c -+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c -@@ -43,7 +43,7 @@ static void ti_thermal_work(struct work_ - - thermal_zone_device_update(data->ti_thermal, THERMAL_EVENT_UNSPECIFIED); - -- dev_dbg(&data->ti_thermal->device, "updated thermal zone %s\n", -+ dev_dbg(data->bgp->dev, "updated thermal zone %s\n", - data->ti_thermal->type); - } - diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-14-thermal-Use-thermal_zone_device_type-accessor.patch b/target/linux/mediatek/patches-6.1/830-v6.4-14-thermal-Use-thermal_zone_device_type-accessor.patch deleted file mode 100644 index 8cec9aba977..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-14-thermal-Use-thermal_zone_device_type-accessor.patch +++ /dev/null @@ -1,62 +0,0 @@ -From 66b3a292d3fc749e8ec7ac5278a17e8a5757ecbc Mon Sep 17 00:00:00 2001 -From: Daniel Lezcano -Date: Wed, 1 Mar 2023 21:14:41 +0100 -Subject: [PATCH 10/42] thermal: Use thermal_zone_device_type() accessor - -Replace the accesses to 'tz->type' by its accessor version in order to -self-encapsulate the thermal_zone_device structure. - -Signed-off-by: Daniel Lezcano -Reviewed-by: Ido Schimmel #mlxsw -Reviewed-by: AngeloGioacchino Del Regno #MediaTek LVTS -Signed-off-by: Rafael J. Wysocki ---- - drivers/net/ethernet/mellanox/mlxsw/core_thermal.c | 2 +- - drivers/thermal/mediatek/lvts_thermal.c | 6 ++++-- - drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 2 +- - 3 files changed, 6 insertions(+), 4 deletions(-) - ---- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c -+++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c -@@ -168,7 +168,7 @@ mlxsw_thermal_module_trips_update(struct - - if (crit_temp > emerg_temp) { - dev_warn(dev, "%s : Critical threshold %d is above emergency threshold %d\n", -- tz->tzdev->type, crit_temp, emerg_temp); -+ thermal_zone_device_type(tz->tzdev), crit_temp, emerg_temp); - return 0; - } - ---- a/drivers/thermal/mediatek/lvts_thermal.c -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -305,7 +305,8 @@ static int lvts_set_trips(struct thermal - * 14-0 : Raw temperature for threshold - */ - if (low != -INT_MAX) { -- pr_debug("%s: Setting low limit temperature interrupt: %d\n", tz->type, low); -+ pr_debug("%s: Setting low limit temperature interrupt: %d\n", -+ thermal_zone_device_type(tz), low); - writel(raw_low, LVTS_H2NTHRE(base)); - } - -@@ -318,7 +319,8 @@ static int lvts_set_trips(struct thermal - * - * 14-0 : Raw temperature for threshold - */ -- pr_debug("%s: Setting high limit temperature interrupt: %d\n", tz->type, high); -+ pr_debug("%s: Setting high limit temperature interrupt: %d\n", -+ thermal_zone_device_type(tz), high); - writel(raw_high, LVTS_HTHRE(base)); - - return 0; ---- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c -+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c -@@ -44,7 +44,7 @@ static void ti_thermal_work(struct work_ - thermal_zone_device_update(data->ti_thermal, THERMAL_EVENT_UNSPECIFIED); - - dev_dbg(data->bgp->dev, "updated thermal zone %s\n", -- data->ti_thermal->type); -+ thermal_zone_device_type(data->ti_thermal)); - } - - /** diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-15-thermal-drivers-mediatek-Control-buffer-enablement-t.patch b/target/linux/mediatek/patches-6.1/830-v6.4-15-thermal-drivers-mediatek-Control-buffer-enablement-t.patch deleted file mode 100644 index 68f41fdd168..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-15-thermal-drivers-mediatek-Control-buffer-enablement-t.patch +++ /dev/null @@ -1,81 +0,0 @@ -From f6658c1c4ae98477d6be00495226c0617354fe76 Mon Sep 17 00:00:00 2001 -From: Markus Schneider-Pargmann -Date: Fri, 27 Jan 2023 16:44:43 +0100 -Subject: [PATCH 11/42] thermal/drivers/mediatek: Control buffer enablement - tweaks - -Add logic in order to be able to turn on the control buffer on MT8365. -This change now allows to have control buffer support for MTK_THERMAL_V1, -and it allows to define the register offset, and mask used to enable it. - -Signed-off-by: Markus Schneider-Pargmann -Signed-off-by: Fabien Parent -Signed-off-by: Amjad Ouled-Ameur -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20221018-up-i350-thermal-bringup-v9-2-55a1ae14af74@baylibre.com -Signed-off-by: Daniel Lezcano ---- - drivers/thermal/mediatek/auxadc_thermal.c | 28 +++++++++++++++-------- - 1 file changed, 19 insertions(+), 9 deletions(-) - ---- a/drivers/thermal/mediatek/auxadc_thermal.c -+++ b/drivers/thermal/mediatek/auxadc_thermal.c -@@ -307,6 +307,9 @@ struct mtk_thermal_data { - bool need_switch_bank; - struct thermal_bank_cfg bank_data[MAX_NUM_ZONES]; - enum mtk_thermal_version version; -+ u32 apmixed_buffer_ctl_reg; -+ u32 apmixed_buffer_ctl_mask; -+ u32 apmixed_buffer_ctl_set; - }; - - struct mtk_thermal { -@@ -560,6 +563,9 @@ static const struct mtk_thermal_data mt7 - .adcpnp = mt7622_adcpnp, - .sensor_mux_values = mt7622_mux_values, - .version = MTK_THERMAL_V2, -+ .apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON1, -+ .apmixed_buffer_ctl_mask = GENMASK(31, 6) | BIT(3), -+ .apmixed_buffer_ctl_set = BIT(0), - }; - - /* -@@ -1079,14 +1085,18 @@ static const struct of_device_id mtk_the - }; - MODULE_DEVICE_TABLE(of, mtk_thermal_of_match); - --static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base) -+static void mtk_thermal_turn_on_buffer(struct mtk_thermal *mt, -+ void __iomem *apmixed_base) - { -- int tmp; -+ u32 tmp; -+ -+ if (!mt->conf->apmixed_buffer_ctl_reg) -+ return; - -- tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1); -- tmp &= ~(0x37); -- tmp |= 0x1; -- writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1); -+ tmp = readl(apmixed_base + mt->conf->apmixed_buffer_ctl_reg); -+ tmp &= mt->conf->apmixed_buffer_ctl_mask; -+ tmp |= mt->conf->apmixed_buffer_ctl_set; -+ writel(tmp, apmixed_base + mt->conf->apmixed_buffer_ctl_reg); - udelay(200); - } - -@@ -1184,10 +1194,10 @@ static int mtk_thermal_probe(struct plat - goto err_disable_clk_auxadc; - } - -- if (mt->conf->version != MTK_THERMAL_V1) { -- mtk_thermal_turn_on_buffer(apmixed_base); -+ mtk_thermal_turn_on_buffer(mt, apmixed_base); -+ -+ if (mt->conf->version != MTK_THERMAL_V2) - mtk_thermal_release_periodic_ts(mt, auxadc_base); -- } - - if (mt->conf->version == MTK_THERMAL_V1) - mt->raw_to_mcelsius = raw_to_mcelsius_v1; diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-16-thermal-drivers-mediatek-Add-support-for-MT8365-SoC.patch b/target/linux/mediatek/patches-6.1/830-v6.4-16-thermal-drivers-mediatek-Add-support-for-MT8365-SoC.patch deleted file mode 100644 index 285c6f6a7b3..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-16-thermal-drivers-mediatek-Add-support-for-MT8365-SoC.patch +++ /dev/null @@ -1,123 +0,0 @@ -From c4eff784465f88218dc5eb51320320464db83d3f Mon Sep 17 00:00:00 2001 -From: Fabien Parent -Date: Fri, 27 Jan 2023 16:44:44 +0100 -Subject: [PATCH 12/42] thermal/drivers/mediatek: Add support for MT8365 SoC - -MT8365 is similar to the other SoCs supported by the driver. It has only -one bank and 3 actual sensors that can be multiplexed. There is another -one sensor that does not have usable data. - -Signed-off-by: Fabien Parent -Signed-off-by: Amjad Ouled-Ameur -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20221018-up-i350-thermal-bringup-v9-3-55a1ae14af74@baylibre.com -Signed-off-by: Daniel Lezcano ---- - drivers/thermal/mediatek/auxadc_thermal.c | 68 +++++++++++++++++++++++ - 1 file changed, 68 insertions(+) - ---- a/drivers/thermal/mediatek/auxadc_thermal.c -+++ b/drivers/thermal/mediatek/auxadc_thermal.c -@@ -31,6 +31,7 @@ - #define AUXADC_CON2_V 0x010 - #define AUXADC_DATA(channel) (0x14 + (channel) * 4) - -+#define APMIXED_SYS_TS_CON0 0x600 - #define APMIXED_SYS_TS_CON1 0x604 - - /* Thermal Controller Registers */ -@@ -281,6 +282,17 @@ enum mtk_thermal_version { - /* The calibration coefficient of sensor */ - #define MT7986_CALIBRATION 165 - -+/* MT8365 */ -+#define MT8365_TEMP_AUXADC_CHANNEL 11 -+#define MT8365_CALIBRATION 164 -+#define MT8365_NUM_CONTROLLER 1 -+#define MT8365_NUM_BANKS 1 -+#define MT8365_NUM_SENSORS 3 -+#define MT8365_NUM_SENSORS_PER_ZONE 3 -+#define MT8365_TS1 0 -+#define MT8365_TS2 1 -+#define MT8365_TS3 2 -+ - struct mtk_thermal; - - struct thermal_bank_cfg { -@@ -435,6 +447,24 @@ static const int mt7986_mux_values[MT798 - static const int mt7986_vts_index[MT7986_NUM_SENSORS] = { VTS1 }; - static const int mt7986_tc_offset[MT7986_NUM_CONTROLLER] = { 0x0, }; - -+/* MT8365 thermal sensor data */ -+static const int mt8365_bank_data[MT8365_NUM_SENSORS] = { -+ MT8365_TS1, MT8365_TS2, MT8365_TS3 -+}; -+ -+static const int mt8365_msr[MT8365_NUM_SENSORS_PER_ZONE] = { -+ TEMP_MSR0, TEMP_MSR1, TEMP_MSR2 -+}; -+ -+static const int mt8365_adcpnp[MT8365_NUM_SENSORS_PER_ZONE] = { -+ TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2 -+}; -+ -+static const int mt8365_mux_values[MT8365_NUM_SENSORS] = { 0, 1, 2 }; -+static const int mt8365_tc_offset[MT8365_NUM_CONTROLLER] = { 0 }; -+ -+static const int mt8365_vts_index[MT8365_NUM_SENSORS] = { VTS1, VTS2, VTS3 }; -+ - /* - * The MT8173 thermal controller has four banks. Each bank can read up to - * four temperature sensors simultaneously. The MT8173 has a total of 5 -@@ -510,6 +540,40 @@ static const struct mtk_thermal_data mt2 - }; - - /* -+ * The MT8365 thermal controller has one bank, which can read up to -+ * four temperature sensors simultaneously. The MT8365 has a total of 3 -+ * temperature sensors. -+ * -+ * The thermal core only gets the maximum temperature of this one bank, -+ * so the bank concept wouldn't be necessary here. However, the SVS (Smart -+ * Voltage Scaling) unit makes its decisions based on the same bank -+ * data. -+ */ -+static const struct mtk_thermal_data mt8365_thermal_data = { -+ .auxadc_channel = MT8365_TEMP_AUXADC_CHANNEL, -+ .num_banks = MT8365_NUM_BANKS, -+ .num_sensors = MT8365_NUM_SENSORS, -+ .vts_index = mt8365_vts_index, -+ .cali_val = MT8365_CALIBRATION, -+ .num_controller = MT8365_NUM_CONTROLLER, -+ .controller_offset = mt8365_tc_offset, -+ .need_switch_bank = false, -+ .bank_data = { -+ { -+ .num_sensors = MT8365_NUM_SENSORS, -+ .sensors = mt8365_bank_data -+ }, -+ }, -+ .msr = mt8365_msr, -+ .adcpnp = mt8365_adcpnp, -+ .sensor_mux_values = mt8365_mux_values, -+ .version = MTK_THERMAL_V1, -+ .apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON0, -+ .apmixed_buffer_ctl_mask = (u32) ~GENMASK(29, 28), -+ .apmixed_buffer_ctl_set = 0, -+}; -+ -+/* - * The MT2712 thermal controller has one bank, which can read up to - * four temperature sensors simultaneously. The MT2712 has a total of 4 - * temperature sensors. -@@ -1080,6 +1144,10 @@ static const struct of_device_id mtk_the - { - .compatible = "mediatek,mt8183-thermal", - .data = (void *)&mt8183_thermal_data, -+ }, -+ { -+ .compatible = "mediatek,mt8365-thermal", -+ .data = (void *)&mt8365_thermal_data, - }, { - }, - }; diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-17-thermal-drivers-mediatek-Add-delay-after-thermal-ban.patch b/target/linux/mediatek/patches-6.1/830-v6.4-17-thermal-drivers-mediatek-Add-delay-after-thermal-ban.patch deleted file mode 100644 index 5c99aa80c1e..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-17-thermal-drivers-mediatek-Add-delay-after-thermal-ban.patch +++ /dev/null @@ -1,50 +0,0 @@ -From 4eead70db74922bc61e9d0b4591524369a335751 Mon Sep 17 00:00:00 2001 -From: Amjad Ouled-Ameur -Date: Fri, 27 Jan 2023 16:44:46 +0100 -Subject: [PATCH 13/42] thermal/drivers/mediatek: Add delay after thermal banks - initialization - -Thermal sensor reads performed immediately after thermal bank -initialization returns bogus values. This is currently tackled by returning -0 if the temperature is bogus (exceeding 200000). - -Instead, add a delay between the bank init and the thermal zone device -register to properly fix this. - -Signed-off-by: Michael Kao -Signed-off-by: Hsin-Yi Wang -Signed-off-by: Amjad Ouled-Ameur -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20221018-up-i350-thermal-bringup-v9-5-55a1ae14af74@baylibre.com -Signed-off-by: Daniel Lezcano ---- - drivers/thermal/mediatek/auxadc_thermal.c | 11 +++-------- - 1 file changed, 3 insertions(+), 8 deletions(-) - ---- a/drivers/thermal/mediatek/auxadc_thermal.c -+++ b/drivers/thermal/mediatek/auxadc_thermal.c -@@ -816,14 +816,6 @@ static int mtk_thermal_bank_temperature( - mt, conf->bank_data[bank->id].sensors[i], raw); - - -- /* -- * The first read of a sensor often contains very high bogus -- * temperature value. Filter these out so that the system does -- * not immediately shut down. -- */ -- if (temp > 200000) -- temp = 0; -- - if (temp > max) - max = temp; - } -@@ -1281,6 +1273,9 @@ static int mtk_thermal_probe(struct plat - - platform_set_drvdata(pdev, mt); - -+ /* Delay for thermal banks to be ready */ -+ msleep(30); -+ - tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt, - &mtk_thermal_ops); - if (IS_ERR(tzdev)) { diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-18-thermal-drivers-mediatek-lvts_thermal-Fix-sensor-1-i.patch b/target/linux/mediatek/patches-6.1/830-v6.4-18-thermal-drivers-mediatek-lvts_thermal-Fix-sensor-1-i.patch deleted file mode 100644 index 734f5c1e770..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-18-thermal-drivers-mediatek-lvts_thermal-Fix-sensor-1-i.patch +++ /dev/null @@ -1,46 +0,0 @@ -From ad9dc9e92367803a4f9576aea0dab110d03fc510 Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Tue, 28 Mar 2023 11:10:17 +0800 -Subject: [PATCH 14/42] thermal/drivers/mediatek/lvts_thermal: Fix sensor 1 - interrupt status bitmask - -The binary representation for sensor 1 interrupt status was incorrectly -assembled, when compared to the full table given in the same comment -section. The conversion into hex was also incorrect, leading to -incorrect interrupt status bitmask for sensor 1. This would cause the -driver to incorrectly identify changes for sensor 1, when in fact it -was sensor 0, or a sensor access time out. - -Fix the binary and hex representations in the comments, and the actual -bitmask macro. - -Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver") -Signed-off-by: Chen-Yu Tsai -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230328031017.1360976-1-wenst@chromium.org ---- - drivers/thermal/mediatek/lvts_thermal.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/drivers/thermal/mediatek/lvts_thermal.c -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -66,7 +66,7 @@ - #define LVTS_MONINT_CONF 0x9FBF7BDE - - #define LVTS_INT_SENSOR0 0x0009001F --#define LVTS_INT_SENSOR1 0X000881F0 -+#define LVTS_INT_SENSOR1 0x001203E0 - #define LVTS_INT_SENSOR2 0x00247C00 - #define LVTS_INT_SENSOR3 0x1FC00000 - -@@ -395,8 +395,8 @@ static irqreturn_t lvts_ctrl_irq_handler - * => 0x1FC00000 - * sensor 2 interrupt: 0000 0000 0010 0100 0111 1100 0000 0000 - * => 0x00247C00 -- * sensor 1 interrupt: 0000 0000 0001 0001 0000 0011 1110 0000 -- * => 0X000881F0 -+ * sensor 1 interrupt: 0000 0000 0001 0010 0000 0011 1110 0000 -+ * => 0X001203E0 - * sensor 0 interrupt: 0000 0000 0000 1001 0000 0000 0001 1111 - * => 0x0009001F - */ diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-19-thermal-drivers-mediatek-lvts_thermal-Add-AP-domain-.patch b/target/linux/mediatek/patches-6.1/830-v6.4-19-thermal-drivers-mediatek-lvts_thermal-Add-AP-domain-.patch deleted file mode 100644 index d09c2055a3e..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-19-thermal-drivers-mediatek-lvts_thermal-Add-AP-domain-.patch +++ /dev/null @@ -1,149 +0,0 @@ -From 9aad43ad3285fc21158fb416830a6156a9a31fa5 Mon Sep 17 00:00:00 2001 -From: Balsam CHIHI -Date: Tue, 7 Mar 2023 16:45:22 +0100 -Subject: [PATCH 15/42] thermal/drivers/mediatek/lvts_thermal: Add AP domain - for mt8195 - -Add MT8195 AP Domain support to LVTS Driver. - -Take the opportunity to update the comments to show calibration data -information related to the new domain. - -[dlezcano]: Massaged a bit the changelog - -Signed-off-by: Balsam CHIHI -Tested-by: Chen-Yu Tsai -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230307154524.118541-3-bchihi@baylibre.com ---- - drivers/thermal/mediatek/lvts_thermal.c | 94 +++++++++++++++++++------ - 1 file changed, 74 insertions(+), 20 deletions(-) - ---- a/drivers/thermal/mediatek/lvts_thermal.c -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -530,29 +530,33 @@ static int lvts_sensor_init(struct devic - * The efuse blob values follows the sensor enumeration per thermal - * controller. The decoding of the stream is as follow: - * -- * <--?-> <----big0 ???---> <-sensor0-> <-0-> -- * ------------------------------------------ -- * index in the stream: : | 0x0 | 0x1 | 0x2 | 0x3 | 0x4 | 0x5 | 0x6 | -- * ------------------------------------------ -+ * stream index map for MCU Domain : - * -- * <--sensor1--><-0-> <----big1 ???---> <-sen -- * ------------------------------------------ -- * | 0x7 | 0x8 | 0x9 | 0xA | 0xB | OxC | OxD | -- * ------------------------------------------ -+ * <-----mcu-tc#0-----> <-----sensor#0-----> <-----sensor#1-----> -+ * 0x01 | 0x02 | 0x03 | 0x04 | 0x05 | 0x06 | 0x07 | 0x08 | 0x09 - * -- * sor0-> <-0-> <-sensor1-> <-0-> .......... -- * ------------------------------------------ -- * | 0x7 | 0x8 | 0x9 | 0xA | 0xB | OxC | OxD | -- * ------------------------------------------ -+ * <-----mcu-tc#1-----> <-----sensor#2-----> <-----sensor#3-----> -+ * 0x0A | 0x0B | 0x0C | 0x0D | 0x0E | 0x0F | 0x10 | 0x11 | 0x12 - * -- * And so on ... -+ * <-----mcu-tc#2-----> <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6-----> <-----sensor#7-----> -+ * 0x13 | 0x14 | 0x15 | 0x16 | 0x17 | 0x18 | 0x19 | 0x1A | 0x1B | 0x1C | 0x1D | 0x1E | 0x1F | 0x20 | 0x21 -+ * -+ * stream index map for AP Domain : -+ * -+ * <-----ap--tc#0-----> <-----sensor#0-----> <-----sensor#1-----> -+ * 0x22 | 0x23 | 0x24 | 0x25 | 0x26 | 0x27 | 0x28 | 0x29 | 0x2A -+ * -+ * <-----ap--tc#1-----> <-----sensor#2-----> <-----sensor#3-----> -+ * 0x2B | 0x2C | 0x2D | 0x2E | 0x2F | 0x30 | 0x31 | 0x32 | 0x33 -+ * -+ * <-----ap--tc#2-----> <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6-----> -+ * 0x34 | 0x35 | 0x36 | 0x37 | 0x38 | 0x39 | 0x3A | 0x3B | 0x3C | 0x3D | 0x3E | 0x3F -+ * -+ * <-----ap--tc#3-----> <-----sensor#7-----> <-----sensor#8-----> -+ * 0x40 | 0x41 | 0x42 | 0x43 | 0x44 | 0x45 | 0x46 | 0x47 | 0x48 - * - * The data description gives the offset of the calibration data in - * this bytes stream for each sensor. -- * -- * Each thermal controller can handle up to 4 sensors max, we don't -- * care if there are less as the array of calibration is sized to 4 -- * anyway. The unused sensor slot will be zeroed. - */ - static int lvts_calibration_init(struct device *dev, struct lvts_ctrl *lvts_ctrl, - const struct lvts_ctrl_data *lvts_ctrl_data, -@@ -1165,7 +1169,7 @@ static int lvts_remove(struct platform_d - return 0; - } - --static const struct lvts_ctrl_data mt8195_lvts_data_ctrl[] = { -+static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = { - { - .cal_offset = { 0x04, 0x07 }, - .lvts_sensor = { -@@ -1200,13 +1204,63 @@ static const struct lvts_ctrl_data mt819 - } - }; - -+static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = { -+ { -+ .cal_offset = { 0x25, 0x28 }, -+ .lvts_sensor = { -+ { .dt_id = MT8195_AP_VPU0 }, -+ { .dt_id = MT8195_AP_VPU1 } -+ }, -+ .num_lvts_sensor = 2, -+ .offset = 0x0, -+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195, -+ }, -+ { -+ .cal_offset = { 0x2e, 0x31 }, -+ .lvts_sensor = { -+ { .dt_id = MT8195_AP_GPU0 }, -+ { .dt_id = MT8195_AP_GPU1 } -+ }, -+ .num_lvts_sensor = 2, -+ .offset = 0x100, -+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195, -+ }, -+ { -+ .cal_offset = { 0x37, 0x3a, 0x3d }, -+ .lvts_sensor = { -+ { .dt_id = MT8195_AP_VDEC }, -+ { .dt_id = MT8195_AP_IMG }, -+ { .dt_id = MT8195_AP_INFRA }, -+ }, -+ .num_lvts_sensor = 3, -+ .offset = 0x200, -+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195, -+ }, -+ { -+ .cal_offset = { 0x43, 0x46 }, -+ .lvts_sensor = { -+ { .dt_id = MT8195_AP_CAM0 }, -+ { .dt_id = MT8195_AP_CAM1 } -+ }, -+ .num_lvts_sensor = 2, -+ .offset = 0x300, -+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195, -+ } -+}; -+ - static const struct lvts_data mt8195_lvts_mcu_data = { -- .lvts_ctrl = mt8195_lvts_data_ctrl, -- .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_data_ctrl), -+ .lvts_ctrl = mt8195_lvts_mcu_data_ctrl, -+ .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl), -+}; -+ -+static const struct lvts_data mt8195_lvts_ap_data = { -+ .lvts_ctrl = mt8195_lvts_ap_data_ctrl, -+ .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_ap_data_ctrl), - }; - - static const struct of_device_id lvts_of_match[] = { - { .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data }, -+ { .compatible = "mediatek,mt8195-lvts-ap", .data = &mt8195_lvts_ap_data }, - {}, - }; - MODULE_DEVICE_TABLE(of, lvts_of_match); diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-20-Revert-thermal-drivers-mediatek-Add-delay-after-ther.patch b/target/linux/mediatek/patches-6.1/830-v6.4-20-Revert-thermal-drivers-mediatek-Add-delay-after-ther.patch deleted file mode 100644 index a48ea3742bb..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-20-Revert-thermal-drivers-mediatek-Add-delay-after-ther.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 7105a86760bd9e4d107075cefc75016b693a5542 Mon Sep 17 00:00:00 2001 -From: AngeloGioacchino Del Regno -Date: Wed, 19 Apr 2023 08:11:45 +0200 -Subject: [PATCH 16/42] Revert "thermal/drivers/mediatek: Add delay after - thermal banks initialization" - -Some more testing revealed that this commit introduces a regression on some -MT8173 Chromebooks and at least on one MT6795 Sony Xperia M5 smartphone due -to the delay being apparently variable and machine specific. - -Another solution would be to delay for a bit more (~70ms) but this is not -feasible for two reasons: first of all, we're adding an even bigger delay -in a probe function; second, some machines need less, some may need even -more, making the msleep at probe solution highly suboptimal. - -This reverts commit 10debf8c2da8011c8009dd4b3f6d0ab85891c81b. - -Fixes: 10debf8c2da8 ("thermal/drivers/mediatek: Add delay after thermal banks initialization") -Reported-by: "kernelci.org bot" -Signed-off-by: AngeloGioacchino Del Regno -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230419061146.22246-2-angelogioacchino.delregno@collabora.com ---- - drivers/thermal/mediatek/auxadc_thermal.c | 11 ++++++++--- - 1 file changed, 8 insertions(+), 3 deletions(-) - ---- a/drivers/thermal/mediatek/auxadc_thermal.c -+++ b/drivers/thermal/mediatek/auxadc_thermal.c -@@ -816,6 +816,14 @@ static int mtk_thermal_bank_temperature( - mt, conf->bank_data[bank->id].sensors[i], raw); - - -+ /* -+ * The first read of a sensor often contains very high bogus -+ * temperature value. Filter these out so that the system does -+ * not immediately shut down. -+ */ -+ if (temp > 200000) -+ temp = 0; -+ - if (temp > max) - max = temp; - } -@@ -1273,9 +1281,6 @@ static int mtk_thermal_probe(struct plat - - platform_set_drvdata(pdev, mt); - -- /* Delay for thermal banks to be ready */ -- msleep(30); -- - tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt, - &mtk_thermal_ops); - if (IS_ERR(tzdev)) { diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-21-thermal-drivers-mediatek-Add-temperature-constraints.patch b/target/linux/mediatek/patches-6.1/830-v6.4-21-thermal-drivers-mediatek-Add-temperature-constraints.patch deleted file mode 100644 index aae87af5d1c..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-21-thermal-drivers-mediatek-Add-temperature-constraints.patch +++ /dev/null @@ -1,78 +0,0 @@ -From 681b652c9dfc4037d4a55b2733e091a4e1a5de18 Mon Sep 17 00:00:00 2001 -From: AngeloGioacchino Del Regno -Date: Wed, 19 Apr 2023 08:11:46 +0200 -Subject: [PATCH 17/42] thermal/drivers/mediatek: Add temperature constraints - to validate read -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The AUXADC thermal v1 allows reading temperature range between -20°C to -150°C and any value out of this range is invalid. - -Add new definitions for MT8173_TEMP_{MIN_MAX} and a new small helper -mtk_thermal_temp_is_valid() to check if new readings are in range: if -not, we tell to the API that the reading is invalid by returning -THERMAL_TEMP_INVALID. - -It was chosen to introduce the helper function because, even though this -temperature range is realistically ok for all, it comes from a downstream -kernel driver for version 1, but here we also support v2 and v3 which may -may have wider constraints. - -Signed-off-by: AngeloGioacchino Del Regno -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230419061146.22246-3-angelogioacchino.delregno@collabora.com ---- - drivers/thermal/mediatek/auxadc_thermal.c | 24 +++++++++++++++++------ - 1 file changed, 18 insertions(+), 6 deletions(-) - ---- a/drivers/thermal/mediatek/auxadc_thermal.c -+++ b/drivers/thermal/mediatek/auxadc_thermal.c -@@ -116,6 +116,10 @@ - /* The calibration coefficient of sensor */ - #define MT8173_CALIBRATION 165 - -+/* Valid temperatures range */ -+#define MT8173_TEMP_MIN -20000 -+#define MT8173_TEMP_MAX 150000 -+ - /* - * Layout of the fuses providing the calibration data - * These macros could be used for MT8183, MT8173, MT2701, and MT2712. -@@ -689,6 +693,11 @@ static const struct mtk_thermal_data mt7 - .version = MTK_THERMAL_V3, - }; - -+static bool mtk_thermal_temp_is_valid(int temp) -+{ -+ return (temp >= MT8173_TEMP_MIN) && (temp <= MT8173_TEMP_MAX); -+} -+ - /** - * raw_to_mcelsius_v1 - convert a raw ADC value to mcelsius - * @mt: The thermal controller -@@ -815,14 +824,17 @@ static int mtk_thermal_bank_temperature( - temp = mt->raw_to_mcelsius( - mt, conf->bank_data[bank->id].sensors[i], raw); - -- - /* -- * The first read of a sensor often contains very high bogus -- * temperature value. Filter these out so that the system does -- * not immediately shut down. -+ * Depending on the filt/sen intervals and ADC polling time, -+ * we may need up to 60 milliseconds after initialization: this -+ * will result in the first reading containing an out of range -+ * temperature value. -+ * Validate the reading to both address the aforementioned issue -+ * and to eventually avoid bogus readings during runtime in the -+ * event that the AUXADC gets unstable due to high EMI, etc. - */ -- if (temp > 200000) -- temp = 0; -+ if (!mtk_thermal_temp_is_valid(temp)) -+ temp = THERMAL_TEMP_INVALID; - - if (temp > max) - max = temp; diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-22-thermal-drivers-mediatek-Use-devm_of_iomap-to-avoid-.patch b/target/linux/mediatek/patches-6.1/830-v6.4-22-thermal-drivers-mediatek-Use-devm_of_iomap-to-avoid-.patch deleted file mode 100644 index 782684aacc6..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-22-thermal-drivers-mediatek-Use-devm_of_iomap-to-avoid-.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 458fa1d508de3f17e49d974a0158d9aeff273a58 Mon Sep 17 00:00:00 2001 -From: Kang Chen -Date: Wed, 19 Apr 2023 10:07:48 +0800 -Subject: [PATCH 18/42] thermal/drivers/mediatek: Use devm_of_iomap to avoid - resource leak in mtk_thermal_probe - -Smatch reports: -1. mtk_thermal_probe() warn: 'apmixed_base' from of_iomap() not released. -2. mtk_thermal_probe() warn: 'auxadc_base' from of_iomap() not released. - -The original code forgets to release iomap resource when handling errors, -fix it by switch to devm_of_iomap. - -Fixes: 89945047b166 ("thermal: mediatek: Add tsensor support for V2 thermal system") -Signed-off-by: Kang Chen -Reviewed-by: Dongliang Mu -Reviewed-by: AngeloGioacchino Del Regno -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230419020749.621257-1-void0red@hust.edu.cn ---- - drivers/thermal/mediatek/auxadc_thermal.c | 14 ++++++++++++-- - 1 file changed, 12 insertions(+), 2 deletions(-) - ---- a/drivers/thermal/mediatek/auxadc_thermal.c -+++ b/drivers/thermal/mediatek/auxadc_thermal.c -@@ -1232,7 +1232,12 @@ static int mtk_thermal_probe(struct plat - return -ENODEV; - } - -- auxadc_base = of_iomap(auxadc, 0); -+ auxadc_base = devm_of_iomap(&pdev->dev, auxadc, 0, NULL); -+ if (IS_ERR(auxadc_base)) { -+ of_node_put(auxadc); -+ return PTR_ERR(auxadc_base); -+ } -+ - auxadc_phys_base = of_get_phys_base(auxadc); - - of_node_put(auxadc); -@@ -1248,7 +1253,12 @@ static int mtk_thermal_probe(struct plat - return -ENODEV; - } - -- apmixed_base = of_iomap(apmixedsys, 0); -+ apmixed_base = devm_of_iomap(&pdev->dev, apmixedsys, 0, NULL); -+ if (IS_ERR(apmixed_base)) { -+ of_node_put(apmixedsys); -+ return PTR_ERR(apmixed_base); -+ } -+ - apmixed_phys_base = of_get_phys_base(apmixedsys); - - of_node_put(apmixedsys); diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-23-thermal-drivers-mediatek-Change-clk_prepare_enable-t.patch b/target/linux/mediatek/patches-6.1/830-v6.4-23-thermal-drivers-mediatek-Change-clk_prepare_enable-t.patch deleted file mode 100644 index d7896dbd60a..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-23-thermal-drivers-mediatek-Change-clk_prepare_enable-t.patch +++ /dev/null @@ -1,100 +0,0 @@ -From 227d1856924ec00a4f5bdf5afcf77bc7f3f04e86 Mon Sep 17 00:00:00 2001 -From: Kang Chen -Date: Wed, 19 Apr 2023 10:07:49 +0800 -Subject: [PATCH 19/42] thermal/drivers/mediatek: Change clk_prepare_enable to - devm_clk_get_enabled in mtk_thermal_probe - -Use devm_clk_get_enabled to do automatic resource management. -Meanwhile, remove error handling labels in the probe function and -the whole remove function. - -Signed-off-by: Kang Chen -Reviewed-by: Dongliang Mu -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230419020749.621257-2-void0red@hust.edu.cn ---- - drivers/thermal/mediatek/auxadc_thermal.c | 44 +++++------------------ - 1 file changed, 9 insertions(+), 35 deletions(-) - ---- a/drivers/thermal/mediatek/auxadc_thermal.c -+++ b/drivers/thermal/mediatek/auxadc_thermal.c -@@ -1206,14 +1206,6 @@ static int mtk_thermal_probe(struct plat - - mt->conf = of_device_get_match_data(&pdev->dev); - -- mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm"); -- if (IS_ERR(mt->clk_peri_therm)) -- return PTR_ERR(mt->clk_peri_therm); -- -- mt->clk_auxadc = devm_clk_get(&pdev->dev, "auxadc"); -- if (IS_ERR(mt->clk_auxadc)) -- return PTR_ERR(mt->clk_auxadc); -- - mt->thermal_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); - if (IS_ERR(mt->thermal_base)) - return PTR_ERR(mt->thermal_base); -@@ -1272,16 +1264,18 @@ static int mtk_thermal_probe(struct plat - if (ret) - return ret; - -- ret = clk_prepare_enable(mt->clk_auxadc); -- if (ret) { -+ mt->clk_auxadc = devm_clk_get_enabled(&pdev->dev, "auxadc"); -+ if (IS_ERR(mt->clk_auxadc)) { -+ ret = PTR_ERR(mt->clk_auxadc); - dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret); - return ret; - } - -- ret = clk_prepare_enable(mt->clk_peri_therm); -- if (ret) { -+ mt->clk_peri_therm = devm_clk_get_enabled(&pdev->dev, "therm"); -+ if (IS_ERR(mt->clk_peri_therm)) { -+ ret = PTR_ERR(mt->clk_peri_therm); - dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret); -- goto err_disable_clk_auxadc; -+ return ret; - } - - mtk_thermal_turn_on_buffer(mt, apmixed_base); -@@ -1305,38 +1299,18 @@ static int mtk_thermal_probe(struct plat - - tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt, - &mtk_thermal_ops); -- if (IS_ERR(tzdev)) { -- ret = PTR_ERR(tzdev); -- goto err_disable_clk_peri_therm; -- } -+ if (IS_ERR(tzdev)) -+ return PTR_ERR(tzdev); - - ret = devm_thermal_add_hwmon_sysfs(&pdev->dev, tzdev); - if (ret) - dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs"); - - return 0; -- --err_disable_clk_peri_therm: -- clk_disable_unprepare(mt->clk_peri_therm); --err_disable_clk_auxadc: -- clk_disable_unprepare(mt->clk_auxadc); -- -- return ret; --} -- --static int mtk_thermal_remove(struct platform_device *pdev) --{ -- struct mtk_thermal *mt = platform_get_drvdata(pdev); -- -- clk_disable_unprepare(mt->clk_peri_therm); -- clk_disable_unprepare(mt->clk_auxadc); -- -- return 0; - } - - static struct platform_driver mtk_thermal_driver = { - .probe = mtk_thermal_probe, -- .remove = mtk_thermal_remove, - .driver = { - .name = "mtk-thermal", - .of_match_table = mtk_thermal_of_match, diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-24-thermal-drivers-mediatek-Use-of_address_to_resource.patch b/target/linux/mediatek/patches-6.1/830-v6.4-24-thermal-drivers-mediatek-Use-of_address_to_resource.patch deleted file mode 100644 index fd18a5365c0..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-24-thermal-drivers-mediatek-Use-of_address_to_resource.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 655fe2533ac05323a07c19ba079bf2064e7741af Mon Sep 17 00:00:00 2001 -From: Rob Herring -Date: Sun, 19 Mar 2023 11:32:31 -0500 -Subject: [PATCH 20/42] thermal/drivers/mediatek: Use of_address_to_resource() - -Replace of_get_address() and of_translate_address() calls with single -call to of_address_to_resource(). - -Signed-off-by: Rob Herring -Reviewed-by: AngeloGioacchino Del Regno -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230319163231.226738-1-robh@kernel.org ---- - drivers/thermal/mediatek/auxadc_thermal.c | 8 +++----- - 1 file changed, 3 insertions(+), 5 deletions(-) - ---- a/drivers/thermal/mediatek/auxadc_thermal.c -+++ b/drivers/thermal/mediatek/auxadc_thermal.c -@@ -979,14 +979,12 @@ static void mtk_thermal_init_bank(struct - - static u64 of_get_phys_base(struct device_node *np) - { -- u64 size64; -- const __be32 *regaddr_p; -+ struct resource res; - -- regaddr_p = of_get_address(np, 0, &size64, NULL); -- if (!regaddr_p) -+ if (of_address_to_resource(np, 0, &res)) - return OF_BAD_ADDR; - -- return of_translate_address(np, regaddr_p); -+ return res.start; - } - - static int mtk_thermal_extract_efuse_v1(struct mtk_thermal *mt, u32 *buf) diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-25-Revert-thermal-drivers-mediatek-Use-devm_of_iomap-to.patch b/target/linux/mediatek/patches-6.1/830-v6.4-25-Revert-thermal-drivers-mediatek-Use-devm_of_iomap-to.patch deleted file mode 100644 index c3ff17d5173..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-25-Revert-thermal-drivers-mediatek-Use-devm_of_iomap-to.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 2c380d07215e6fce3ac66cc5af059bc2c2a69f7a Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Ricardo=20Ca=C3=B1uelo?= -Date: Thu, 25 May 2023 14:18:11 +0200 -Subject: [PATCH 21/42] Revert "thermal/drivers/mediatek: Use devm_of_iomap to - avoid resource leak in mtk_thermal_probe" -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This reverts commit f05c7b7d9ea9477fcc388476c6f4ade8c66d2d26. - -That change was causing a regression in the generic-adc-thermal-probed -bootrr test as reported in the kernelci-results list [1]. -A proper rework will take longer, so revert it for now. - -[1] https://groups.io/g/kernelci-results/message/42660 - -Fixes: f05c7b7d9ea9 ("thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe") -Signed-off-by: Ricardo Cañuelo -Suggested-by: AngeloGioacchino Del Regno -Reviewed-by: AngeloGioacchino Del Regno -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230525121811.3360268-1-ricardo.canuelo@collabora.com ---- - drivers/thermal/mediatek/auxadc_thermal.c | 14 ++------------ - 1 file changed, 2 insertions(+), 12 deletions(-) - ---- a/drivers/thermal/mediatek/auxadc_thermal.c -+++ b/drivers/thermal/mediatek/auxadc_thermal.c -@@ -1222,12 +1222,7 @@ static int mtk_thermal_probe(struct plat - return -ENODEV; - } - -- auxadc_base = devm_of_iomap(&pdev->dev, auxadc, 0, NULL); -- if (IS_ERR(auxadc_base)) { -- of_node_put(auxadc); -- return PTR_ERR(auxadc_base); -- } -- -+ auxadc_base = of_iomap(auxadc, 0); - auxadc_phys_base = of_get_phys_base(auxadc); - - of_node_put(auxadc); -@@ -1243,12 +1238,7 @@ static int mtk_thermal_probe(struct plat - return -ENODEV; - } - -- apmixed_base = devm_of_iomap(&pdev->dev, apmixedsys, 0, NULL); -- if (IS_ERR(apmixed_base)) { -- of_node_put(apmixedsys); -- return PTR_ERR(apmixed_base); -- } -- -+ apmixed_base = of_iomap(apmixedsys, 0); - apmixed_phys_base = of_get_phys_base(apmixedsys); - - of_node_put(apmixedsys); diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-26-thermal-drivers-mediatek-lvts_thermal-Register-therm.patch b/target/linux/mediatek/patches-6.1/830-v6.4-26-thermal-drivers-mediatek-lvts_thermal-Register-therm.patch deleted file mode 100644 index c4456529c1c..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-26-thermal-drivers-mediatek-lvts_thermal-Register-therm.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 496f4b08981d8a788ad5a2073fa1c65a2af1862b Mon Sep 17 00:00:00 2001 -From: Chen-Yu Tsai -Date: Tue, 13 Jun 2023 17:13:16 +0800 -Subject: [PATCH 22/42] thermal/drivers/mediatek/lvts_thermal: Register thermal - zones as hwmon sensors - -Register thermal zones as hwmon sensors to let userspace read -temperatures using standard hwmon interface. - -Signed-off-by: Chen-Yu Tsai -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230613091317.1691247-1-wenst@chromium.org ---- - drivers/thermal/mediatek/lvts_thermal.c | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/drivers/thermal/mediatek/lvts_thermal.c -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -19,6 +19,8 @@ - #include - #include - -+#include "../thermal_hwmon.h" -+ - #define LVTS_MONCTL0(__base) (__base + 0x0000) - #define LVTS_MONCTL1(__base) (__base + 0x0004) - #define LVTS_MONCTL2(__base) (__base + 0x0008) -@@ -996,6 +998,9 @@ static int lvts_ctrl_start(struct device - return PTR_ERR(tz); - } - -+ if (devm_thermal_add_hwmon_sysfs(dev, tz)) -+ dev_warn(dev, "zone %d: Failed to add hwmon sysfs attributes\n", dt_id); -+ - /* - * The thermal zone pointer will be needed in the - * interrupt handler, we store it in the sensor diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-27-thermal-drivers-mediatek-lvts_thermal-Remove-redunda.patch b/target/linux/mediatek/patches-6.1/830-v6.4-27-thermal-drivers-mediatek-lvts_thermal-Remove-redunda.patch deleted file mode 100644 index 22e7a954ede..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-27-thermal-drivers-mediatek-lvts_thermal-Remove-redunda.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 885b9768ce2a66ed5d250822aed53d5114c895da Mon Sep 17 00:00:00 2001 -From: Yangtao Li -Date: Tue, 20 Jun 2023 17:07:31 +0800 -Subject: [PATCH 23/42] thermal/drivers/mediatek/lvts_thermal: Remove redundant - msg in lvts_ctrl_start() - -The upper-layer devm_thermal_add_hwmon_sysfs() function can directly -print error information. - -Signed-off-by: Yangtao Li -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230620090732.50025-10-frank.li@vivo.com ---- - drivers/thermal/mediatek/lvts_thermal.c | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - ---- a/drivers/thermal/mediatek/lvts_thermal.c -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -998,8 +998,7 @@ static int lvts_ctrl_start(struct device - return PTR_ERR(tz); - } - -- if (devm_thermal_add_hwmon_sysfs(dev, tz)) -- dev_warn(dev, "zone %d: Failed to add hwmon sysfs attributes\n", dt_id); -+ devm_thermal_add_hwmon_sysfs(dev, tz); - - /* - * The thermal zone pointer will be needed in the diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-29-thermal-drivers-mediatek-lvts_thermal-Handle-IRQ-on-.patch b/target/linux/mediatek/patches-6.1/830-v6.4-29-thermal-drivers-mediatek-lvts_thermal-Handle-IRQ-on-.patch deleted file mode 100644 index bc67727423d..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-29-thermal-drivers-mediatek-lvts_thermal-Handle-IRQ-on-.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 27b389d9f62c2174f95fe4002b11e77d4cb3ce80 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?= - -Date: Thu, 6 Jul 2023 11:37:32 -0400 -Subject: [PATCH 25/42] thermal/drivers/mediatek/lvts_thermal: Handle IRQ on - all controllers -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -There is a single IRQ handler for each LVTS thermal domain, and it is -supposed to check each of its underlying controllers for the origin of -the interrupt and clear its status. However due to a typo, only the -first controller was ever being handled, which resulted in the interrupt -never being cleared when it happened on the other controllers. Add the -missing index so interrupts are handled for all controllers. - -Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver") -Reviewed-by: Matthias Brugger -Reviewed-by: AngeloGioacchino Del Regno -Tested-by: Chen-Yu Tsai -Signed-off-by: Nícolas F. R. A. Prado -Reviewed-by: Alexandre Mergnat -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230706153823.201943-2-nfraprado@collabora.com ---- - drivers/thermal/mediatek/lvts_thermal.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/thermal/mediatek/lvts_thermal.c -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -451,7 +451,7 @@ static irqreturn_t lvts_irq_handler(int - - for (i = 0; i < lvts_td->num_lvts_ctrl; i++) { - -- aux = lvts_ctrl_irq_handler(lvts_td->lvts_ctrl); -+ aux = lvts_ctrl_irq_handler(&lvts_td->lvts_ctrl[i]); - if (aux != IRQ_HANDLED) - continue; - diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-30-thermal-drivers-mediatek-lvts_thermal-Honor-sensors-.patch b/target/linux/mediatek/patches-6.1/830-v6.4-30-thermal-drivers-mediatek-lvts_thermal-Honor-sensors-.patch deleted file mode 100644 index 51d119c05b8..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-30-thermal-drivers-mediatek-lvts_thermal-Honor-sensors-.patch +++ /dev/null @@ -1,120 +0,0 @@ -From 6d827142643ee10c13ff9a1d90f38fb399aa9fff Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?= - -Date: Thu, 6 Jul 2023 11:37:33 -0400 -Subject: [PATCH 26/42] thermal/drivers/mediatek/lvts_thermal: Honor sensors in - immediate mode -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Each controller can be configured to operate on immediate or filtered -mode. On filtered mode, the sensors are enabled by setting the -corresponding bits in MONCTL0, while on immediate mode, by setting -MSRCTL1. - -Previously, the code would set MSRCTL1 for all four sensors when -configured to immediate mode, but given that the controller might not -have all four sensors connected, this would cause interrupts to trigger -for non-existent sensors. Fix this by handling the MSRCTL1 register -analogously to the MONCTL0: only enable the sensors that were declared. - -Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver") -Reviewed-by: AngeloGioacchino Del Regno -Tested-by: Chen-Yu Tsai -Signed-off-by: Nícolas F. R. A. Prado -Reviewed-by: Alexandre Mergnat -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230706153823.201943-3-nfraprado@collabora.com ---- - drivers/thermal/mediatek/lvts_thermal.c | 57 ++++++++++++++----------- - 1 file changed, 33 insertions(+), 24 deletions(-) - ---- a/drivers/thermal/mediatek/lvts_thermal.c -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -897,24 +897,6 @@ static int lvts_ctrl_configure(struct de - writel(value, LVTS_MSRCTL0(lvts_ctrl->base)); - - /* -- * LVTS_MSRCTL1 : Measurement control -- * -- * Bits: -- * -- * 9: Ignore MSRCTL0 config and do immediate measurement on sensor3 -- * 6: Ignore MSRCTL0 config and do immediate measurement on sensor2 -- * 5: Ignore MSRCTL0 config and do immediate measurement on sensor1 -- * 4: Ignore MSRCTL0 config and do immediate measurement on sensor0 -- * -- * That configuration will ignore the filtering and the delays -- * introduced below in MONCTL1 and MONCTL2 -- */ -- if (lvts_ctrl->mode == LVTS_MSR_IMMEDIATE_MODE) { -- value = BIT(9) | BIT(6) | BIT(5) | BIT(4); -- writel(value, LVTS_MSRCTL1(lvts_ctrl->base)); -- } -- -- /* - * LVTS_MONCTL1 : Period unit and group interval configuration - * - * The clock source of LVTS thermal controller is 26MHz. -@@ -979,6 +961,15 @@ static int lvts_ctrl_start(struct device - struct thermal_zone_device *tz; - u32 sensor_map = 0; - int i; -+ /* -+ * Bitmaps to enable each sensor on immediate and filtered modes, as -+ * described in MSRCTL1 and MONCTL0 registers below, respectively. -+ */ -+ u32 sensor_imm_bitmap[] = { BIT(4), BIT(5), BIT(6), BIT(9) }; -+ u32 sensor_filt_bitmap[] = { BIT(0), BIT(1), BIT(2), BIT(3) }; -+ -+ u32 *sensor_bitmap = lvts_ctrl->mode == LVTS_MSR_IMMEDIATE_MODE ? -+ sensor_imm_bitmap : sensor_filt_bitmap; - - for (i = 0; i < lvts_ctrl->num_lvts_sensor; i++) { - -@@ -1016,20 +1007,38 @@ static int lvts_ctrl_start(struct device - * map, so we can enable the temperature monitoring in - * the hardware thermal controller. - */ -- sensor_map |= BIT(i); -+ sensor_map |= sensor_bitmap[i]; - } - - /* -- * Bits: -- * 9: Single point access flow -- * 0-3: Enable sensing point 0-3 -- * - * The initialization of the thermal zones give us - * which sensor point to enable. If any thermal zone - * was not described in the device tree, it won't be - * enabled here in the sensor map. - */ -- writel(sensor_map | BIT(9), LVTS_MONCTL0(lvts_ctrl->base)); -+ if (lvts_ctrl->mode == LVTS_MSR_IMMEDIATE_MODE) { -+ /* -+ * LVTS_MSRCTL1 : Measurement control -+ * -+ * Bits: -+ * -+ * 9: Ignore MSRCTL0 config and do immediate measurement on sensor3 -+ * 6: Ignore MSRCTL0 config and do immediate measurement on sensor2 -+ * 5: Ignore MSRCTL0 config and do immediate measurement on sensor1 -+ * 4: Ignore MSRCTL0 config and do immediate measurement on sensor0 -+ * -+ * That configuration will ignore the filtering and the delays -+ * introduced in MONCTL1 and MONCTL2 -+ */ -+ writel(sensor_map, LVTS_MSRCTL1(lvts_ctrl->base)); -+ } else { -+ /* -+ * Bits: -+ * 9: Single point access flow -+ * 0-3: Enable sensing point 0-3 -+ */ -+ writel(sensor_map | BIT(9), LVTS_MONCTL0(lvts_ctrl->base)); -+ } - - return 0; - } diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-31-thermal-drivers-mediatek-lvts_thermal-Use-offset-thr.patch b/target/linux/mediatek/patches-6.1/830-v6.4-31-thermal-drivers-mediatek-lvts_thermal-Use-offset-thr.patch deleted file mode 100644 index bfbadee3503..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-31-thermal-drivers-mediatek-lvts_thermal-Use-offset-thr.patch +++ /dev/null @@ -1,77 +0,0 @@ -From 93bb11dd19bdcc1fc97c7ceababd0db9fde128ad Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?= - -Date: Thu, 6 Jul 2023 11:37:34 -0400 -Subject: [PATCH 27/42] thermal/drivers/mediatek/lvts_thermal: Use offset - threshold for IRQ -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -There are two kinds of temperature monitoring interrupts available: -* High Offset, Low Offset -* Hot, Hot to normal, Cold - -The code currently uses the hot/h2n/cold interrupts, however in a way -that doesn't work: the cold threshold is left uninitialized, which -prevents the other thresholds from ever triggering, and the h2n -interrupt is used as the lower threshold, which prevents the hot -interrupt from triggering again after the thresholds are updated by the -thermal framework, since a hot interrupt can only trigger again after -the hot to normal interrupt has been triggered. - -But better yet than addressing those issues, is to use the high/low -offset interrupts instead. This way only two thresholds need to be -managed, which have a simpler state machine, making them a better match -to the thermal framework's high and low thresholds. - -Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver") -Signed-off-by: Nícolas F. R. A. Prado -Reviewed-by: Alexandre Mergnat -Reviewed-by: AngeloGioacchino Del Regno -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230706153823.201943-4-nfraprado@collabora.com ---- - drivers/thermal/mediatek/lvts_thermal.c | 12 ++++++------ - 1 file changed, 6 insertions(+), 6 deletions(-) - ---- a/drivers/thermal/mediatek/lvts_thermal.c -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -298,9 +298,9 @@ static int lvts_set_trips(struct thermal - u32 raw_high = lvts_temp_to_raw(high); - - /* -- * Hot to normal temperature threshold -+ * Low offset temperature threshold - * -- * LVTS_H2NTHRE -+ * LVTS_OFFSETL - * - * Bits: - * -@@ -309,13 +309,13 @@ static int lvts_set_trips(struct thermal - if (low != -INT_MAX) { - pr_debug("%s: Setting low limit temperature interrupt: %d\n", - thermal_zone_device_type(tz), low); -- writel(raw_low, LVTS_H2NTHRE(base)); -+ writel(raw_low, LVTS_OFFSETL(base)); - } - - /* -- * Hot temperature threshold -+ * High offset temperature threshold - * -- * LVTS_HTHRE -+ * LVTS_OFFSETH - * - * Bits: - * -@@ -323,7 +323,7 @@ static int lvts_set_trips(struct thermal - */ - pr_debug("%s: Setting high limit temperature interrupt: %d\n", - thermal_zone_device_type(tz), high); -- writel(raw_high, LVTS_HTHRE(base)); -+ writel(raw_high, LVTS_OFFSETH(base)); - - return 0; - } diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-32-thermal-drivers-mediatek-lvts_thermal-Disable-undesi.patch b/target/linux/mediatek/patches-6.1/830-v6.4-32-thermal-drivers-mediatek-lvts_thermal-Disable-undesi.patch deleted file mode 100644 index 1c35d0ad199..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-32-thermal-drivers-mediatek-lvts_thermal-Disable-undesi.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 8f8cab9d3e90acf1db278ef44ad05f10aefb973f Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?= - -Date: Thu, 6 Jul 2023 11:37:35 -0400 -Subject: [PATCH 28/42] thermal/drivers/mediatek/lvts_thermal: Disable - undesired interrupts -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Out of the many interrupts supported by the hardware, the only ones of -interest to the driver currently are: -* The temperature went over the high offset threshold, for any of the - sensors -* The temperature went below the low offset threshold, for any of the - sensors -* The temperature went over the stage3 threshold - -These are the only thresholds configured by the driver through the -OFFSETH, OFFSETL, and PROTTC registers, respectively. - -The current interrupt mask in LVTS_MONINT_CONF, enables many more -interrupts, including data ready on sensors for both filtered and -immediate mode. These are not only not handled by the driver, but they -are also triggered too often, causing unneeded overhead. Disable these -unnecessary interrupts. - -The meaning of each bit can be seen in the comment describing -LVTS_MONINTST in the IRQ handler. - -Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver") -Signed-off-by: Nícolas F. R. A. Prado -Reviewed-by: AngeloGioacchino Del Regno -Reviewed-by: Alexandre Mergnat -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230706153823.201943-5-nfraprado@collabora.com ---- - drivers/thermal/mediatek/lvts_thermal.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/thermal/mediatek/lvts_thermal.c -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -65,7 +65,7 @@ - #define LVTS_HW_FILTER 0x2 - #define LVTS_TSSEL_CONF 0x13121110 - #define LVTS_CALSCALE_CONF 0x300 --#define LVTS_MONINT_CONF 0x9FBF7BDE -+#define LVTS_MONINT_CONF 0x8300318C - - #define LVTS_INT_SENSOR0 0x0009001F - #define LVTS_INT_SENSOR1 0x001203E0 diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-33-thermal-drivers-mediatek-lvts_thermal-Don-t-leave-th.patch b/target/linux/mediatek/patches-6.1/830-v6.4-33-thermal-drivers-mediatek-lvts_thermal-Don-t-leave-th.patch deleted file mode 100644 index 60942fdb895..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-33-thermal-drivers-mediatek-lvts_thermal-Don-t-leave-th.patch +++ /dev/null @@ -1,70 +0,0 @@ -From bd1ccf9408e6155564530af5e09b53ae497fe332 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?= - -Date: Thu, 6 Jul 2023 11:37:36 -0400 -Subject: [PATCH 29/42] thermal/drivers/mediatek/lvts_thermal: Don't leave - threshold zeroed -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The thermal framework might leave the low threshold unset if there -aren't any lower trip points. This leaves the register zeroed, which -translates to a very high temperature for the low threshold. The -interrupt for this threshold is then immediately triggered, and the -state machine gets stuck, preventing any other temperature monitoring -interrupts to ever trigger. - -(The same happens by not setting the Cold or Hot to Normal thresholds -when using those) - -Set the unused threshold to a valid low value. This value was chosen so -that for any valid golden temperature read from the efuse, when the -value is converted to raw and back again to milliCelsius, the result -doesn't underflow. - -Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver") -Signed-off-by: Nícolas F. R. A. Prado -Reviewed-by: Alexandre Mergnat -Reviewed-by: AngeloGioacchino Del Regno -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230706153823.201943-6-nfraprado@collabora.com ---- - drivers/thermal/mediatek/lvts_thermal.c | 12 ++++++------ - 1 file changed, 6 insertions(+), 6 deletions(-) - ---- a/drivers/thermal/mediatek/lvts_thermal.c -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -83,6 +83,8 @@ - - #define LVTS_HW_SHUTDOWN_MT8195 105000 - -+#define LVTS_MINIMUM_THRESHOLD 20000 -+ - static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT; - static int coeff_b = LVTS_COEFF_B; - -@@ -294,7 +296,7 @@ static int lvts_set_trips(struct thermal - { - struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz); - void __iomem *base = lvts_sensor->base; -- u32 raw_low = lvts_temp_to_raw(low); -+ u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD); - u32 raw_high = lvts_temp_to_raw(high); - - /* -@@ -306,11 +308,9 @@ static int lvts_set_trips(struct thermal - * - * 14-0 : Raw temperature for threshold - */ -- if (low != -INT_MAX) { -- pr_debug("%s: Setting low limit temperature interrupt: %d\n", -- thermal_zone_device_type(tz), low); -- writel(raw_low, LVTS_OFFSETL(base)); -- } -+ pr_debug("%s: Setting low limit temperature interrupt: %d\n", -+ thermal_zone_device_type(tz), low); -+ writel(raw_low, LVTS_OFFSETL(base)); - - /* - * High offset temperature threshold diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-34-thermal-drivers-mediatek-lvts_thermal-Manage-thresho.patch b/target/linux/mediatek/patches-6.1/830-v6.4-34-thermal-drivers-mediatek-lvts_thermal-Manage-thresho.patch deleted file mode 100644 index e99aa0cdfd9..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-34-thermal-drivers-mediatek-lvts_thermal-Manage-thresho.patch +++ /dev/null @@ -1,156 +0,0 @@ -From d4dd09968cab3249e6148e1c3fccb51824edb411 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?= - -Date: Thu, 6 Jul 2023 11:37:37 -0400 -Subject: [PATCH 30/42] thermal/drivers/mediatek/lvts_thermal: Manage threshold - between sensors -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Each LVTS thermal controller can have up to four sensors, each capable -of triggering its own interrupt when its measured temperature crosses -the configured threshold. The threshold for each sensor is handled -separately by the thermal framework, since each one is registered with -its own thermal zone and trips. However, the temperature thresholds are -configured on the controller, and therefore are shared between all -sensors on that controller. - -When the temperature measured by the sensors is different enough to -cause the thermal framework to configure different thresholds for each -one, interrupts start triggering on sensors outside the last threshold -configured. - -To address the issue, track the thresholds required by each sensor and -only actually set the highest one in the hardware, and disable -interrupts for all sensors outside the current configured range. - -Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver") -Signed-off-by: Nícolas F. R. A. Prado -Reviewed-by: Alexandre Mergnat -Reviewed-by: AngeloGioacchino Del Regno -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230706153823.201943-7-nfraprado@collabora.com ---- - drivers/thermal/mediatek/lvts_thermal.c | 69 +++++++++++++++++++++++++ - 1 file changed, 69 insertions(+) - ---- a/drivers/thermal/mediatek/lvts_thermal.c -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -67,6 +67,11 @@ - #define LVTS_CALSCALE_CONF 0x300 - #define LVTS_MONINT_CONF 0x8300318C - -+#define LVTS_MONINT_OFFSET_SENSOR0 0xC -+#define LVTS_MONINT_OFFSET_SENSOR1 0x180 -+#define LVTS_MONINT_OFFSET_SENSOR2 0x3000 -+#define LVTS_MONINT_OFFSET_SENSOR3 0x3000000 -+ - #define LVTS_INT_SENSOR0 0x0009001F - #define LVTS_INT_SENSOR1 0x001203E0 - #define LVTS_INT_SENSOR2 0x00247C00 -@@ -112,6 +117,8 @@ struct lvts_sensor { - void __iomem *base; - int id; - int dt_id; -+ int low_thresh; -+ int high_thresh; - }; - - struct lvts_ctrl { -@@ -121,6 +128,8 @@ struct lvts_ctrl { - int num_lvts_sensor; - int mode; - void __iomem *base; -+ int low_thresh; -+ int high_thresh; - }; - - struct lvts_domain { -@@ -292,12 +301,66 @@ static int lvts_get_temp(struct thermal_ - return 0; - } - -+static void lvts_update_irq_mask(struct lvts_ctrl *lvts_ctrl) -+{ -+ u32 masks[] = { -+ LVTS_MONINT_OFFSET_SENSOR0, -+ LVTS_MONINT_OFFSET_SENSOR1, -+ LVTS_MONINT_OFFSET_SENSOR2, -+ LVTS_MONINT_OFFSET_SENSOR3, -+ }; -+ u32 value = 0; -+ int i; -+ -+ value = readl(LVTS_MONINT(lvts_ctrl->base)); -+ -+ for (i = 0; i < ARRAY_SIZE(masks); i++) { -+ if (lvts_ctrl->sensors[i].high_thresh == lvts_ctrl->high_thresh -+ && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh) -+ value |= masks[i]; -+ else -+ value &= ~masks[i]; -+ } -+ -+ writel(value, LVTS_MONINT(lvts_ctrl->base)); -+} -+ -+static bool lvts_should_update_thresh(struct lvts_ctrl *lvts_ctrl, int high) -+{ -+ int i; -+ -+ if (high > lvts_ctrl->high_thresh) -+ return true; -+ -+ for (i = 0; i < lvts_ctrl->num_lvts_sensor; i++) -+ if (lvts_ctrl->sensors[i].high_thresh == lvts_ctrl->high_thresh -+ && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh) -+ return false; -+ -+ return true; -+} -+ - static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high) - { - struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz); -+ struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl, sensors[lvts_sensor->id]); - void __iomem *base = lvts_sensor->base; - u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD); - u32 raw_high = lvts_temp_to_raw(high); -+ bool should_update_thresh; -+ -+ lvts_sensor->low_thresh = low; -+ lvts_sensor->high_thresh = high; -+ -+ should_update_thresh = lvts_should_update_thresh(lvts_ctrl, high); -+ if (should_update_thresh) { -+ lvts_ctrl->high_thresh = high; -+ lvts_ctrl->low_thresh = low; -+ } -+ lvts_update_irq_mask(lvts_ctrl); -+ -+ if (!should_update_thresh) -+ return 0; - - /* - * Low offset temperature threshold -@@ -521,6 +584,9 @@ static int lvts_sensor_init(struct devic - */ - lvts_sensor[i].msr = lvts_ctrl_data->mode == LVTS_MSR_IMMEDIATE_MODE ? - imm_regs[i] : msr_regs[i]; -+ -+ lvts_sensor[i].low_thresh = INT_MIN; -+ lvts_sensor[i].high_thresh = INT_MIN; - }; - - lvts_ctrl->num_lvts_sensor = lvts_ctrl_data->num_lvts_sensor; -@@ -688,6 +754,9 @@ static int lvts_ctrl_init(struct device - */ - lvts_ctrl[i].hw_tshut_raw_temp = - lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp); -+ -+ lvts_ctrl[i].low_thresh = INT_MIN; -+ lvts_ctrl[i].high_thresh = INT_MIN; - } - - /* diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-35-thermal-drivers-mediatek-lvts-Fix-parameter-check-in.patch b/target/linux/mediatek/patches-6.1/830-v6.4-35-thermal-drivers-mediatek-lvts-Fix-parameter-check-in.patch deleted file mode 100644 index 9ce3eeb74b5..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-35-thermal-drivers-mediatek-lvts-Fix-parameter-check-in.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 5af4904adc8b840987000724977c13c706d3b7d8 Mon Sep 17 00:00:00 2001 -From: Minjie Du -Date: Thu, 13 Jul 2023 12:24:12 +0800 -Subject: [PATCH 31/42] thermal/drivers/mediatek/lvts: Fix parameter check in - lvts_debugfs_init() - -The documentation says "If an error occurs, ERR_PTR(-ERROR) will be -returned" but the current code checks against a NULL pointer returned. - -Fix this by checking if IS_ERR(). - -Signed-off-by: Minjie Du -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230713042413.2519-1-duminjie@vivo.com ---- - drivers/thermal/mediatek/lvts_thermal.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/thermal/mediatek/lvts_thermal.c -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -201,7 +201,7 @@ static int lvts_debugfs_init(struct devi - int i; - - lvts_td->dom_dentry = debugfs_create_dir(dev_name(dev), NULL); -- if (!lvts_td->dom_dentry) -+ if (IS_ERR(lvts_td->dom_dentry)) - return 0; - - for (i = 0; i < lvts_td->num_lvts_ctrl; i++) { diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-36-thermal-drivers-mediatek-Clean-up-redundant-dev_err_.patch b/target/linux/mediatek/patches-6.1/830-v6.4-36-thermal-drivers-mediatek-Clean-up-redundant-dev_err_.patch deleted file mode 100644 index 48410549175..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-36-thermal-drivers-mediatek-Clean-up-redundant-dev_err_.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 6186be80317d1dbda34d35c06c084a083938f2d3 Mon Sep 17 00:00:00 2001 -From: Chen Jiahao -Date: Wed, 2 Aug 2023 17:45:27 +0800 -Subject: [PATCH 32/42] thermal/drivers/mediatek: Clean up redundant - dev_err_probe() - -Referring to platform_get_irq()'s definition, the return value has -already been checked if ret < 0, and printed via dev_err_probe(). -Calling dev_err_probe() one more time outside platform_get_irq() -is obviously redundant. - -Removing dev_err_probe() outside platform_get_irq() to clean up -above problem. - -Signed-off-by: Chen Jiahao -Reviewed-by: AngeloGioacchino Del Regno -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230802094527.988842-1-chenjiahao16@huawei.com ---- - drivers/thermal/mediatek/lvts_thermal.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/thermal/mediatek/lvts_thermal.c -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -1216,7 +1216,7 @@ static int lvts_probe(struct platform_de - - irq = platform_get_irq(pdev, 0); - if (irq < 0) -- return dev_err_probe(dev, irq, "No irq resource\n"); -+ return irq; - - ret = lvts_domain_init(dev, lvts_td, lvts_data); - if (ret) diff --git a/target/linux/mediatek/patches-6.1/830-v6.4-37-thermal-drivers-mediatek-lvts_thermal-Make-readings-.patch b/target/linux/mediatek/patches-6.1/830-v6.4-37-thermal-drivers-mediatek-lvts_thermal-Make-readings-.patch deleted file mode 100644 index c88bf984fa7..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.4-37-thermal-drivers-mediatek-lvts_thermal-Make-readings-.patch +++ /dev/null @@ -1,95 +0,0 @@ -From c2ab54ab0425388e65901a7af2fbf69ead968708 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?= - -Date: Thu, 13 Jul 2023 11:42:37 -0400 -Subject: [PATCH 33/42] thermal/drivers/mediatek/lvts_thermal: Make readings - valid in filtered mode -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Currently, when a controller is configured to use filtered mode, thermal -readings are valid only about 30% of the time. - -Upon testing, it was noticed that lowering any of the interval settings -resulted in an improved rate of valid data. The same was observed when -decreasing the number of samples for each sensor (which also results in -quicker measurements). - -Retrying the read with a timeout longer than the time it takes to -resample (about 344us with these settings and 4 sensors) also improves -the rate. - -Lower all timing settings to the minimum, configure the filtering to -single sample, and poll the measurement register for at least one period -to improve the data validity on filtered mode. With these changes in -place, out of 100000 reads, a single one failed, ie 99.999% of the data -was valid. - -Reviewed-by: Chen-Yu Tsai -Tested-by: Chen-Yu Tsai -Signed-off-by: Nícolas F. R. A. Prado -Reviewed-by: Alexandre Mergnat -Reviewed-by: AngeloGioacchino Del Regno -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230713154743.611870-1-nfraprado@collabora.com ---- - drivers/thermal/mediatek/lvts_thermal.c | 19 ++++++++++++------- - 1 file changed, 12 insertions(+), 7 deletions(-) - ---- a/drivers/thermal/mediatek/lvts_thermal.c -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -58,11 +58,11 @@ - #define LVTS_PROTTC(__base) (__base + 0x00CC) - #define LVTS_CLKEN(__base) (__base + 0x00E4) - --#define LVTS_PERIOD_UNIT ((118 * 1000) / (256 * 38)) --#define LVTS_GROUP_INTERVAL 1 --#define LVTS_FILTER_INTERVAL 1 --#define LVTS_SENSOR_INTERVAL 1 --#define LVTS_HW_FILTER 0x2 -+#define LVTS_PERIOD_UNIT 0 -+#define LVTS_GROUP_INTERVAL 0 -+#define LVTS_FILTER_INTERVAL 0 -+#define LVTS_SENSOR_INTERVAL 0 -+#define LVTS_HW_FILTER 0x0 - #define LVTS_TSSEL_CONF 0x13121110 - #define LVTS_CALSCALE_CONF 0x300 - #define LVTS_MONINT_CONF 0x8300318C -@@ -86,6 +86,9 @@ - #define LVTS_MSR_IMMEDIATE_MODE 0 - #define LVTS_MSR_FILTERED_MODE 1 - -+#define LVTS_MSR_READ_TIMEOUT_US 400 -+#define LVTS_MSR_READ_WAIT_US (LVTS_MSR_READ_TIMEOUT_US / 2) -+ - #define LVTS_HW_SHUTDOWN_MT8195 105000 - - #define LVTS_MINIMUM_THRESHOLD 20000 -@@ -268,6 +271,7 @@ static int lvts_get_temp(struct thermal_ - struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz); - void __iomem *msr = lvts_sensor->msr; - u32 value; -+ int rc; - - /* - * Measurement registers: -@@ -280,7 +284,8 @@ static int lvts_get_temp(struct thermal_ - * 16 : Valid temperature - * 15-0 : Raw temperature - */ -- value = readl(msr); -+ rc = readl_poll_timeout(msr, value, value & BIT(16), -+ LVTS_MSR_READ_WAIT_US, LVTS_MSR_READ_TIMEOUT_US); - - /* - * As the thermal zone temperature will read before the -@@ -293,7 +298,7 @@ static int lvts_get_temp(struct thermal_ - * functionning temperature and directly jump to a system - * shutdown. - */ -- if (!(value & BIT(16))) -+ if (rc) - return -EAGAIN; - - *temp = lvts_raw_to_temp(value & 0xFFFF); diff --git a/target/linux/mediatek/patches-6.1/830-v6.6-38-thermal-drivers-mediatek-auxadc_thermal-Removed-call.patch b/target/linux/mediatek/patches-6.1/830-v6.6-38-thermal-drivers-mediatek-auxadc_thermal-Removed-call.patch deleted file mode 100644 index 994461cdb16..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.6-38-thermal-drivers-mediatek-auxadc_thermal-Removed-call.patch +++ /dev/null @@ -1,30 +0,0 @@ -From c864ff9de3b225b43bb8e08dedb223632323e059 Mon Sep 17 00:00:00 2001 -From: Andrei Coardos -Date: Fri, 11 Aug 2023 22:28:47 +0300 -Subject: [PATCH 34/42] thermal/drivers/mediatek/auxadc_thermal: Removed call - to platform_set_drvdata() - -This function call was found to be unnecessary as there is no equivalent -platform_get_drvdata() call to access the private data of the driver. Also, -the private data is defined in this driver, so there is no risk of it being -accessed outside of this driver file. - -Signed-off-by: Andrei Coardos -Reviewed-by: Alexandru Ardelean -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230811192847.3838-1-aboutphysycs@gmail.com ---- - drivers/thermal/mediatek/auxadc_thermal.c | 2 -- - 1 file changed, 2 deletions(-) - ---- a/drivers/thermal/mediatek/auxadc_thermal.c -+++ b/drivers/thermal/mediatek/auxadc_thermal.c -@@ -1283,8 +1283,6 @@ static int mtk_thermal_probe(struct plat - mtk_thermal_init_bank(mt, i, apmixed_phys_base, - auxadc_phys_base, ctrl_id); - -- platform_set_drvdata(pdev, mt); -- - tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt, - &mtk_thermal_ops); - if (IS_ERR(tzdev)) diff --git a/target/linux/mediatek/patches-6.1/830-v6.7-39-thermal-lvts-Convert-to-platform-remove-callback-ret.patch b/target/linux/mediatek/patches-6.1/830-v6.7-39-thermal-lvts-Convert-to-platform-remove-callback-ret.patch deleted file mode 100644 index b3bfa37458c..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.7-39-thermal-lvts-Convert-to-platform-remove-callback-ret.patch +++ /dev/null @@ -1,58 +0,0 @@ -From 6cf96078969ec00b873db99bae4e47001290685e Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= -Date: Wed, 27 Sep 2023 21:37:23 +0200 -Subject: [PATCH 35/42] thermal: lvts: Convert to platform remove callback - returning void -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The .remove() callback for a platform driver returns an int which makes -many driver authors wrongly assume it's possible to do error handling by -returning an error code. However the value returned is ignored (apart -from emitting a warning) and this typically results in resource leaks. - -To improve here there is a quest to make the remove callback return -void. In the first step of this quest all drivers are converted to -.remove_new(), which already returns void. Eventually after all drivers -are converted, .remove_new() will be renamed to .remove(). - -Trivially convert this driver from always returning zero in the remove -callback to the void returning variant. - -Signed-off-by: Uwe Kleine-König -Acked-by: Daniel Lezcano -Signed-off-by: Rafael J. Wysocki ---- - drivers/thermal/mediatek/lvts_thermal.c | 6 ++---- - 1 file changed, 2 insertions(+), 4 deletions(-) - ---- a/drivers/thermal/mediatek/lvts_thermal.c -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -1241,7 +1241,7 @@ static int lvts_probe(struct platform_de - return 0; - } - --static int lvts_remove(struct platform_device *pdev) -+static void lvts_remove(struct platform_device *pdev) - { - struct lvts_domain *lvts_td; - int i; -@@ -1252,8 +1252,6 @@ static int lvts_remove(struct platform_d - lvts_ctrl_set_enable(&lvts_td->lvts_ctrl[i], false); - - lvts_debugfs_exit(lvts_td); -- -- return 0; - } - - static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = { -@@ -1354,7 +1352,7 @@ MODULE_DEVICE_TABLE(of, lvts_of_match); - - static struct platform_driver lvts_driver = { - .probe = lvts_probe, -- .remove = lvts_remove, -+ .remove_new = lvts_remove, - .driver = { - .name = "mtk-lvts-thermal", - .of_match_table = lvts_of_match, diff --git a/target/linux/mediatek/patches-6.1/830-v6.7-40-thermal-drivers-mediatek-lvts_thermal-Make-coeff-con.patch b/target/linux/mediatek/patches-6.1/830-v6.7-40-thermal-drivers-mediatek-lvts_thermal-Make-coeff-con.patch deleted file mode 100644 index 16a32f564bf..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.7-40-thermal-drivers-mediatek-lvts_thermal-Make-coeff-con.patch +++ /dev/null @@ -1,198 +0,0 @@ -From 26cc18a3d6d9eac21c4f4b4bb96147b2c6617c86 Mon Sep 17 00:00:00 2001 -From: Frank Wunderlich -Date: Fri, 22 Sep 2023 07:50:19 +0200 -Subject: [PATCH 36/42] thermal/drivers/mediatek/lvts_thermal: Make coeff - configurable - -The upcoming mt7988 has different temperature coefficients so we -cannot use constants in the functions lvts_golden_temp_init, -lvts_golden_temp_init and lvts_raw_to_temp anymore. - -Add a field in the lvts_ctrl pointing to the lvts_data which now -contains the soc-specific temperature coefficents. - -To make the code better readable, rename static int coeff_b to -golden_temp_offset, COEFF_A to temp_factor and COEFF_B to temp_offset. - -Signed-off-by: Frank Wunderlich -Reviewed-by: AngeloGioacchino Del Regno -Tested-by: Daniel Golle -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230922055020.6436-4-linux@fw-web.de ---- - drivers/thermal/mediatek/lvts_thermal.c | 51 ++++++++++++++++--------- - 1 file changed, 34 insertions(+), 17 deletions(-) - ---- a/drivers/thermal/mediatek/lvts_thermal.c -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -80,8 +80,8 @@ - #define LVTS_SENSOR_MAX 4 - #define LVTS_GOLDEN_TEMP_MAX 62 - #define LVTS_GOLDEN_TEMP_DEFAULT 50 --#define LVTS_COEFF_A -250460 --#define LVTS_COEFF_B 250460 -+#define LVTS_COEFF_A_MT8195 -250460 -+#define LVTS_COEFF_B_MT8195 250460 - - #define LVTS_MSR_IMMEDIATE_MODE 0 - #define LVTS_MSR_FILTERED_MODE 1 -@@ -94,7 +94,7 @@ - #define LVTS_MINIMUM_THRESHOLD 20000 - - static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT; --static int coeff_b = LVTS_COEFF_B; -+static int golden_temp_offset; - - struct lvts_sensor_data { - int dt_id; -@@ -112,6 +112,8 @@ struct lvts_ctrl_data { - struct lvts_data { - const struct lvts_ctrl_data *lvts_ctrl; - int num_lvts_ctrl; -+ int temp_factor; -+ int temp_offset; - }; - - struct lvts_sensor { -@@ -126,6 +128,7 @@ struct lvts_sensor { - - struct lvts_ctrl { - struct lvts_sensor sensors[LVTS_SENSOR_MAX]; -+ const struct lvts_data *lvts_data; - u32 calibration[LVTS_SENSOR_MAX]; - u32 hw_tshut_raw_temp; - int num_lvts_sensor; -@@ -247,21 +250,21 @@ static void lvts_debugfs_exit(struct lvt - - #endif - --static int lvts_raw_to_temp(u32 raw_temp) -+static int lvts_raw_to_temp(u32 raw_temp, int temp_factor) - { - int temperature; - -- temperature = ((s64)(raw_temp & 0xFFFF) * LVTS_COEFF_A) >> 14; -- temperature += coeff_b; -+ temperature = ((s64)(raw_temp & 0xFFFF) * temp_factor) >> 14; -+ temperature += golden_temp_offset; - - return temperature; - } - --static u32 lvts_temp_to_raw(int temperature) -+static u32 lvts_temp_to_raw(int temperature, int temp_factor) - { -- u32 raw_temp = ((s64)(coeff_b - temperature)) << 14; -+ u32 raw_temp = ((s64)(golden_temp_offset - temperature)) << 14; - -- raw_temp = div_s64(raw_temp, -LVTS_COEFF_A); -+ raw_temp = div_s64(raw_temp, -temp_factor); - - return raw_temp; - } -@@ -269,6 +272,9 @@ static u32 lvts_temp_to_raw(int temperat - static int lvts_get_temp(struct thermal_zone_device *tz, int *temp) - { - struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz); -+ struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl, -+ sensors[lvts_sensor->id]); -+ const struct lvts_data *lvts_data = lvts_ctrl->lvts_data; - void __iomem *msr = lvts_sensor->msr; - u32 value; - int rc; -@@ -301,7 +307,7 @@ static int lvts_get_temp(struct thermal_ - if (rc) - return -EAGAIN; - -- *temp = lvts_raw_to_temp(value & 0xFFFF); -+ *temp = lvts_raw_to_temp(value & 0xFFFF, lvts_data->temp_factor); - - return 0; - } -@@ -348,10 +354,13 @@ static bool lvts_should_update_thresh(st - static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high) - { - struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz); -- struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl, sensors[lvts_sensor->id]); -+ struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl, -+ sensors[lvts_sensor->id]); -+ const struct lvts_data *lvts_data = lvts_ctrl->lvts_data; - void __iomem *base = lvts_sensor->base; -- u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD); -- u32 raw_high = lvts_temp_to_raw(high); -+ u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD, -+ lvts_data->temp_factor); -+ u32 raw_high = lvts_temp_to_raw(high, lvts_data->temp_factor); - bool should_update_thresh; - - lvts_sensor->low_thresh = low; -@@ -692,7 +701,7 @@ static int lvts_calibration_read(struct - return 0; - } - --static int lvts_golden_temp_init(struct device *dev, u32 *value) -+static int lvts_golden_temp_init(struct device *dev, u32 *value, int temp_offset) - { - u32 gt; - -@@ -701,7 +710,7 @@ static int lvts_golden_temp_init(struct - if (gt && gt < LVTS_GOLDEN_TEMP_MAX) - golden_temp = gt; - -- coeff_b = golden_temp * 500 + LVTS_COEFF_B; -+ golden_temp_offset = golden_temp * 500 + temp_offset; - - return 0; - } -@@ -724,7 +733,7 @@ static int lvts_ctrl_init(struct device - * The golden temp information is contained in the first chunk - * of efuse data. - */ -- ret = lvts_golden_temp_init(dev, (u32 *)lvts_td->calib); -+ ret = lvts_golden_temp_init(dev, (u32 *)lvts_td->calib, lvts_data->temp_offset); - if (ret) - return ret; - -@@ -735,6 +744,7 @@ static int lvts_ctrl_init(struct device - for (i = 0; i < lvts_data->num_lvts_ctrl; i++) { - - lvts_ctrl[i].base = lvts_td->base + lvts_data->lvts_ctrl[i].offset; -+ lvts_ctrl[i].lvts_data = lvts_data; - - ret = lvts_sensor_init(dev, &lvts_ctrl[i], - &lvts_data->lvts_ctrl[i]); -@@ -758,7 +768,8 @@ static int lvts_ctrl_init(struct device - * after initializing the calibration. - */ - lvts_ctrl[i].hw_tshut_raw_temp = -- lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp); -+ lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp, -+ lvts_data->temp_factor); - - lvts_ctrl[i].low_thresh = INT_MIN; - lvts_ctrl[i].high_thresh = INT_MIN; -@@ -1223,6 +1234,8 @@ static int lvts_probe(struct platform_de - if (irq < 0) - return irq; - -+ golden_temp_offset = lvts_data->temp_offset; -+ - ret = lvts_domain_init(dev, lvts_td, lvts_data); - if (ret) - return dev_err_probe(dev, ret, "Failed to initialize the lvts domain\n"); -@@ -1336,11 +1349,15 @@ static const struct lvts_ctrl_data mt819 - static const struct lvts_data mt8195_lvts_mcu_data = { - .lvts_ctrl = mt8195_lvts_mcu_data_ctrl, - .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl), -+ .temp_factor = LVTS_COEFF_A_MT8195, -+ .temp_offset = LVTS_COEFF_B_MT8195, - }; - - static const struct lvts_data mt8195_lvts_ap_data = { - .lvts_ctrl = mt8195_lvts_ap_data_ctrl, - .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_ap_data_ctrl), -+ .temp_factor = LVTS_COEFF_A_MT8195, -+ .temp_offset = LVTS_COEFF_B_MT8195, - }; - - static const struct of_device_id lvts_of_match[] = { diff --git a/target/linux/mediatek/patches-6.1/830-v6.7-41-dt-bindings-thermal-mediatek-Add-LVTS-thermal-sensor.patch b/target/linux/mediatek/patches-6.1/830-v6.7-41-dt-bindings-thermal-mediatek-Add-LVTS-thermal-sensor.patch deleted file mode 100644 index 1c2146f43f9..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.7-41-dt-bindings-thermal-mediatek-Add-LVTS-thermal-sensor.patch +++ /dev/null @@ -1,35 +0,0 @@ -From be2cc09bd5b46f13629d4fcdeac7ad1b18bb1a0b Mon Sep 17 00:00:00 2001 -From: Frank Wunderlich -Date: Fri, 22 Sep 2023 07:50:18 +0200 -Subject: [PATCH] dt-bindings: thermal: mediatek: Add LVTS thermal sensors for - mt7988 - -Add sensor constants for MT7988. - -Signed-off-by: Frank Wunderlich -Reviewed-by: AngeloGioacchino Del Regno -Acked-by: Conor Dooley -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230922055020.6436-3-linux@fw-web.de ---- - include/dt-bindings/thermal/mediatek,lvts-thermal.h | 9 +++++++++ - 1 file changed, 9 insertions(+) - ---- a/include/dt-bindings/thermal/mediatek,lvts-thermal.h -+++ b/include/dt-bindings/thermal/mediatek,lvts-thermal.h -@@ -7,6 +7,15 @@ - #ifndef __MEDIATEK_LVTS_DT_H - #define __MEDIATEK_LVTS_DT_H - -+#define MT7988_CPU_0 0 -+#define MT7988_CPU_1 1 -+#define MT7988_ETH2P5G_0 2 -+#define MT7988_ETH2P5G_1 3 -+#define MT7988_TOPS_0 4 -+#define MT7988_TOPS_1 5 -+#define MT7988_ETHWARP_0 6 -+#define MT7988_ETHWARP_1 7 -+ - #define MT8195_MCU_BIG_CPU0 0 - #define MT8195_MCU_BIG_CPU1 1 - #define MT8195_MCU_BIG_CPU2 2 diff --git a/target/linux/mediatek/patches-6.1/830-v6.7-42-thermal-drivers-mediatek-lvts_thermal-Add-mt7988-sup.patch b/target/linux/mediatek/patches-6.1/830-v6.7-42-thermal-drivers-mediatek-lvts_thermal-Add-mt7988-sup.patch deleted file mode 100644 index 97c803a820b..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.7-42-thermal-drivers-mediatek-lvts_thermal-Add-mt7988-sup.patch +++ /dev/null @@ -1,91 +0,0 @@ -From 9924e9b91b43aaa1610a1d59c4caa43785948cf6 Mon Sep 17 00:00:00 2001 -From: Frank Wunderlich -Date: Fri, 22 Sep 2023 07:50:20 +0200 -Subject: [PATCH 37/42] thermal/drivers/mediatek/lvts_thermal: Add mt7988 - support - -Add Support for Mediatek Filogic 880/MT7988 LVTS. - -Signed-off-by: Frank Wunderlich -Tested-by: Daniel Golle -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230922055020.6436-5-linux@fw-web.de ---- - drivers/thermal/mediatek/lvts_thermal.c | 38 +++++++++++++++++++++++++ - 1 file changed, 38 insertions(+) - ---- a/drivers/thermal/mediatek/lvts_thermal.c -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -82,6 +82,8 @@ - #define LVTS_GOLDEN_TEMP_DEFAULT 50 - #define LVTS_COEFF_A_MT8195 -250460 - #define LVTS_COEFF_B_MT8195 250460 -+#define LVTS_COEFF_A_MT7988 -204650 -+#define LVTS_COEFF_B_MT7988 204650 - - #define LVTS_MSR_IMMEDIATE_MODE 0 - #define LVTS_MSR_FILTERED_MODE 1 -@@ -89,6 +91,7 @@ - #define LVTS_MSR_READ_TIMEOUT_US 400 - #define LVTS_MSR_READ_WAIT_US (LVTS_MSR_READ_TIMEOUT_US / 2) - -+#define LVTS_HW_SHUTDOWN_MT7988 105000 - #define LVTS_HW_SHUTDOWN_MT8195 105000 - - #define LVTS_MINIMUM_THRESHOLD 20000 -@@ -1267,6 +1270,33 @@ static void lvts_remove(struct platform_ - lvts_debugfs_exit(lvts_td); - } - -+static const struct lvts_ctrl_data mt7988_lvts_ap_data_ctrl[] = { -+ { -+ .cal_offset = { 0x00, 0x04, 0x08, 0x0c }, -+ .lvts_sensor = { -+ { .dt_id = MT7988_CPU_0 }, -+ { .dt_id = MT7988_CPU_1 }, -+ { .dt_id = MT7988_ETH2P5G_0 }, -+ { .dt_id = MT7988_ETH2P5G_1 } -+ }, -+ .num_lvts_sensor = 4, -+ .offset = 0x0, -+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT7988, -+ }, -+ { -+ .cal_offset = { 0x14, 0x18, 0x1c, 0x20 }, -+ .lvts_sensor = { -+ { .dt_id = MT7988_TOPS_0}, -+ { .dt_id = MT7988_TOPS_1}, -+ { .dt_id = MT7988_ETHWARP_0}, -+ { .dt_id = MT7988_ETHWARP_1} -+ }, -+ .num_lvts_sensor = 4, -+ .offset = 0x100, -+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT7988, -+ } -+}; -+ - static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = { - { - .cal_offset = { 0x04, 0x07 }, -@@ -1346,6 +1376,13 @@ static const struct lvts_ctrl_data mt819 - } - }; - -+static const struct lvts_data mt7988_lvts_ap_data = { -+ .lvts_ctrl = mt7988_lvts_ap_data_ctrl, -+ .num_lvts_ctrl = ARRAY_SIZE(mt7988_lvts_ap_data_ctrl), -+ .temp_factor = LVTS_COEFF_A_MT7988, -+ .temp_offset = LVTS_COEFF_B_MT7988, -+}; -+ - static const struct lvts_data mt8195_lvts_mcu_data = { - .lvts_ctrl = mt8195_lvts_mcu_data_ctrl, - .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl), -@@ -1361,6 +1398,7 @@ static const struct lvts_data mt8195_lvt - }; - - static const struct of_device_id lvts_of_match[] = { -+ { .compatible = "mediatek,mt7988-lvts-ap", .data = &mt7988_lvts_ap_data }, - { .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data }, - { .compatible = "mediatek,mt8195-lvts-ap", .data = &mt8195_lvts_ap_data }, - {}, diff --git a/target/linux/mediatek/patches-6.1/830-v6.7-43-thermal-drivers-mediatek-lvts_thermal-Fix-error-chec.patch b/target/linux/mediatek/patches-6.1/830-v6.7-43-thermal-drivers-mediatek-lvts_thermal-Fix-error-chec.patch deleted file mode 100644 index 5b212a2a372..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.7-43-thermal-drivers-mediatek-lvts_thermal-Fix-error-chec.patch +++ /dev/null @@ -1,30 +0,0 @@ -From fb1bbb5b63e4e3c788a978724749ced57d208054 Mon Sep 17 00:00:00 2001 -From: Minjie Du -Date: Thu, 21 Sep 2023 17:10:50 +0800 -Subject: [PATCH 38/42] thermal/drivers/mediatek/lvts_thermal: Fix error check - in lvts_debugfs_init() - -debugfs_create_dir() function returns an error value embedded in -the pointer (PTR_ERR). Evaluate the return value using IS_ERR -rather than checking for NULL. - -Signed-off-by: Minjie Du -Reviewed-by: Alexandre Mergnat -Reviewed-by: Chen-Yu Tsai -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230921091057.3812-1-duminjie@vivo.com ---- - drivers/thermal/mediatek/lvts_thermal.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/thermal/mediatek/lvts_thermal.c -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -219,7 +219,7 @@ static int lvts_debugfs_init(struct devi - - sprintf(name, "controller%d", i); - dentry = debugfs_create_dir(name, lvts_td->dom_dentry); -- if (!dentry) -+ if (IS_ERR(dentry)) - continue; - - regset = devm_kzalloc(dev, sizeof(*regset), GFP_KERNEL); diff --git a/target/linux/mediatek/patches-6.1/830-v6.7-44-thermal-drivers-mediatek-Fix-probe-for-THERMAL_V2.patch b/target/linux/mediatek/patches-6.1/830-v6.7-44-thermal-drivers-mediatek-Fix-probe-for-THERMAL_V2.patch deleted file mode 100644 index 88f383c4aec..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.7-44-thermal-drivers-mediatek-Fix-probe-for-THERMAL_V2.patch +++ /dev/null @@ -1,33 +0,0 @@ -From e6f43063f2fe9f08b34797bc6d223f7d63b01910 Mon Sep 17 00:00:00 2001 -From: Markus Schneider-Pargmann -Date: Mon, 18 Sep 2023 12:07:06 +0200 -Subject: [PATCH 39/42] thermal/drivers/mediatek: Fix probe for THERMAL_V2 - -Fix the probe function to call mtk_thermal_release_periodic_ts for -everything != MTK_THERMAL_V1. This was accidentally changed from V1 -to V2 in the original patch. - -Reported-by: Frank Wunderlich -Closes: https://lore.kernel.org/lkml/B0B3775B-B8D1-4284-814F-4F41EC22F532@public-files.de/ -Reported-by: Daniel Lezcano -Closes: https://lore.kernel.org/lkml/07a569b9-e691-64ea-dd65-3b49842af33d@linaro.org/ -Fixes: 33140e668b10 ("thermal/drivers/mediatek: Control buffer enablement tweaks") -Signed-off-by: Markus Schneider-Pargmann -Reviewed-by: AngeloGioacchino Del Regno -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230918100706.1229239-1-msp@baylibre.com ---- - drivers/thermal/mediatek/auxadc_thermal.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/thermal/mediatek/auxadc_thermal.c -+++ b/drivers/thermal/mediatek/auxadc_thermal.c -@@ -1268,7 +1268,7 @@ static int mtk_thermal_probe(struct plat - - mtk_thermal_turn_on_buffer(mt, apmixed_base); - -- if (mt->conf->version != MTK_THERMAL_V2) -+ if (mt->conf->version != MTK_THERMAL_V1) - mtk_thermal_release_periodic_ts(mt, auxadc_base); - - if (mt->conf->version == MTK_THERMAL_V1) diff --git a/target/linux/mediatek/patches-6.1/830-v6.7-45-thermal-drivers-mediatek-lvts_thermal-Add-suspend-an.patch b/target/linux/mediatek/patches-6.1/830-v6.7-45-thermal-drivers-mediatek-lvts_thermal-Add-suspend-an.patch deleted file mode 100644 index 7b4b124b561..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.7-45-thermal-drivers-mediatek-lvts_thermal-Add-suspend-an.patch +++ /dev/null @@ -1,83 +0,0 @@ -From a1d874ef3376295ee8ed89b3b5315f4c840ff00b Mon Sep 17 00:00:00 2001 -From: Balsam CHIHI -Date: Tue, 17 Oct 2023 21:05:42 +0200 -Subject: [PATCH 40/42] thermal/drivers/mediatek/lvts_thermal: Add suspend and - resume -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add suspend and resume support to LVTS driver. - -Signed-off-by: Balsam CHIHI -[bero@baylibre.com: suspend/resume in noirq phase] -Co-developed-by: Bernhard Rosenkränzer -Signed-off-by: Bernhard Rosenkränzer -Reviewed-by: Matthias Brugger -Reviewed-by: Alexandre Mergnat -Reviewed-by: AngeloGioacchino Del Regno -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20231017190545.157282-3-bero@baylibre.com ---- - drivers/thermal/mediatek/lvts_thermal.c | 37 +++++++++++++++++++++++++ - 1 file changed, 37 insertions(+) - ---- a/drivers/thermal/mediatek/lvts_thermal.c -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -1297,6 +1297,38 @@ static const struct lvts_ctrl_data mt798 - } - }; - -+static int lvts_suspend(struct device *dev) -+{ -+ struct lvts_domain *lvts_td; -+ int i; -+ -+ lvts_td = dev_get_drvdata(dev); -+ -+ for (i = 0; i < lvts_td->num_lvts_ctrl; i++) -+ lvts_ctrl_set_enable(&lvts_td->lvts_ctrl[i], false); -+ -+ clk_disable_unprepare(lvts_td->clk); -+ -+ return 0; -+} -+ -+static int lvts_resume(struct device *dev) -+{ -+ struct lvts_domain *lvts_td; -+ int i, ret; -+ -+ lvts_td = dev_get_drvdata(dev); -+ -+ ret = clk_prepare_enable(lvts_td->clk); -+ if (ret) -+ return ret; -+ -+ for (i = 0; i < lvts_td->num_lvts_ctrl; i++) -+ lvts_ctrl_set_enable(&lvts_td->lvts_ctrl[i], true); -+ -+ return 0; -+} -+ - static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = { - { - .cal_offset = { 0x04, 0x07 }, -@@ -1405,12 +1437,17 @@ static const struct of_device_id lvts_of - }; - MODULE_DEVICE_TABLE(of, lvts_of_match); - -+static const struct dev_pm_ops lvts_pm_ops = { -+ NOIRQ_SYSTEM_SLEEP_PM_OPS(lvts_suspend, lvts_resume) -+}; -+ - static struct platform_driver lvts_driver = { - .probe = lvts_probe, - .remove_new = lvts_remove, - .driver = { - .name = "mtk-lvts-thermal", - .of_match_table = lvts_of_match, -+ .pm = &lvts_pm_ops, - }, - }; - module_platform_driver(lvts_driver); diff --git a/target/linux/mediatek/patches-6.1/830-v6.7-46-dt-bindings-thermal-mediatek-Add-LVTS-thermal-contro.patch b/target/linux/mediatek/patches-6.1/830-v6.7-46-dt-bindings-thermal-mediatek-Add-LVTS-thermal-contro.patch deleted file mode 100644 index c278168610f..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.7-46-dt-bindings-thermal-mediatek-Add-LVTS-thermal-contro.patch +++ /dev/null @@ -1,49 +0,0 @@ -From 0bb4937b58ab712f158588376dbac97f8e9df68e Mon Sep 17 00:00:00 2001 -From: Balsam CHIHI -Date: Tue, 17 Oct 2023 21:05:41 +0200 -Subject: [PATCH] dt-bindings: thermal: mediatek: Add LVTS thermal controller - definition for mt8192 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add LVTS thermal controller definition for MT8192. - -Signed-off-by: Balsam CHIHI -Reviewed-by: AngeloGioacchino Del Regno -Acked-by: Krzysztof Kozlowski -Signed-off-by: Bernhard Rosenkränzer -Reviewed-by: Matthias Brugger -Reviewed-by: Alexandre Mergnat -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20231017190545.157282-2-bero@baylibre.com ---- - .../thermal/mediatek,lvts-thermal.h | 19 +++++++++++++++++++ - 1 file changed, 19 insertions(+) - ---- a/include/dt-bindings/thermal/mediatek,lvts-thermal.h -+++ b/include/dt-bindings/thermal/mediatek,lvts-thermal.h -@@ -35,4 +35,23 @@ - #define MT8195_AP_CAM0 15 - #define MT8195_AP_CAM1 16 - -+#define MT8192_MCU_BIG_CPU0 0 -+#define MT8192_MCU_BIG_CPU1 1 -+#define MT8192_MCU_BIG_CPU2 2 -+#define MT8192_MCU_BIG_CPU3 3 -+#define MT8192_MCU_LITTLE_CPU0 4 -+#define MT8192_MCU_LITTLE_CPU1 5 -+#define MT8192_MCU_LITTLE_CPU2 6 -+#define MT8192_MCU_LITTLE_CPU3 7 -+ -+#define MT8192_AP_VPU0 8 -+#define MT8192_AP_VPU1 9 -+#define MT8192_AP_GPU0 10 -+#define MT8192_AP_GPU1 11 -+#define MT8192_AP_INFRA 12 -+#define MT8192_AP_CAM 13 -+#define MT8192_AP_MD0 14 -+#define MT8192_AP_MD1 15 -+#define MT8192_AP_MD2 16 -+ - #endif /* __MEDIATEK_LVTS_DT_H */ diff --git a/target/linux/mediatek/patches-6.1/830-v6.7-47-thermal-drivers-mediatek-lvts_thermal-Add-mt8192-sup.patch b/target/linux/mediatek/patches-6.1/830-v6.7-47-thermal-drivers-mediatek-lvts_thermal-Add-mt8192-sup.patch deleted file mode 100644 index 6d68a6cd579..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.7-47-thermal-drivers-mediatek-lvts_thermal-Add-mt8192-sup.patch +++ /dev/null @@ -1,151 +0,0 @@ -From 7d8b3864b38d881cf105328ff8569f47446811ad Mon Sep 17 00:00:00 2001 -From: Balsam CHIHI -Date: Tue, 17 Oct 2023 21:05:43 +0200 -Subject: [PATCH 41/42] thermal/drivers/mediatek/lvts_thermal: Add mt8192 - support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add LVTS Driver support for MT8192. - -Co-developed-by: Nícolas F. R. A. Prado -Signed-off-by: Nícolas F. R. A. Prado -Signed-off-by: Balsam CHIHI -Reviewed-by: Nícolas F. R. A. Prado -[bero@baylibre.com: cosmetic changes, rebase] -Signed-off-by: Bernhard Rosenkränzer -Reviewed-by: Matthias Brugger -Reviewed-by: Alexandre Mergnat -Reviewed-by: AngeloGioacchino Del Regno -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20231017190545.157282-4-bero@baylibre.com ---- - drivers/thermal/mediatek/lvts_thermal.c | 95 +++++++++++++++++++++++++ - 1 file changed, 95 insertions(+) - ---- a/drivers/thermal/mediatek/lvts_thermal.c -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -92,6 +92,7 @@ - #define LVTS_MSR_READ_WAIT_US (LVTS_MSR_READ_TIMEOUT_US / 2) - - #define LVTS_HW_SHUTDOWN_MT7988 105000 -+#define LVTS_HW_SHUTDOWN_MT8192 105000 - #define LVTS_HW_SHUTDOWN_MT8195 105000 - - #define LVTS_MINIMUM_THRESHOLD 20000 -@@ -1329,6 +1330,88 @@ static int lvts_resume(struct device *de - return 0; - } - -+static const struct lvts_ctrl_data mt8192_lvts_mcu_data_ctrl[] = { -+ { -+ .cal_offset = { 0x04, 0x08 }, -+ .lvts_sensor = { -+ { .dt_id = MT8192_MCU_BIG_CPU0 }, -+ { .dt_id = MT8192_MCU_BIG_CPU1 } -+ }, -+ .num_lvts_sensor = 2, -+ .offset = 0x0, -+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192, -+ .mode = LVTS_MSR_FILTERED_MODE, -+ }, -+ { -+ .cal_offset = { 0x0c, 0x10 }, -+ .lvts_sensor = { -+ { .dt_id = MT8192_MCU_BIG_CPU2 }, -+ { .dt_id = MT8192_MCU_BIG_CPU3 } -+ }, -+ .num_lvts_sensor = 2, -+ .offset = 0x100, -+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192, -+ .mode = LVTS_MSR_FILTERED_MODE, -+ }, -+ { -+ .cal_offset = { 0x14, 0x18, 0x1c, 0x20 }, -+ .lvts_sensor = { -+ { .dt_id = MT8192_MCU_LITTLE_CPU0 }, -+ { .dt_id = MT8192_MCU_LITTLE_CPU1 }, -+ { .dt_id = MT8192_MCU_LITTLE_CPU2 }, -+ { .dt_id = MT8192_MCU_LITTLE_CPU3 } -+ }, -+ .num_lvts_sensor = 4, -+ .offset = 0x200, -+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192, -+ .mode = LVTS_MSR_FILTERED_MODE, -+ } -+}; -+ -+static const struct lvts_ctrl_data mt8192_lvts_ap_data_ctrl[] = { -+ { -+ .cal_offset = { 0x24, 0x28 }, -+ .lvts_sensor = { -+ { .dt_id = MT8192_AP_VPU0 }, -+ { .dt_id = MT8192_AP_VPU1 } -+ }, -+ .num_lvts_sensor = 2, -+ .offset = 0x0, -+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192, -+ }, -+ { -+ .cal_offset = { 0x2c, 0x30 }, -+ .lvts_sensor = { -+ { .dt_id = MT8192_AP_GPU0 }, -+ { .dt_id = MT8192_AP_GPU1 } -+ }, -+ .num_lvts_sensor = 2, -+ .offset = 0x100, -+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192, -+ }, -+ { -+ .cal_offset = { 0x34, 0x38 }, -+ .lvts_sensor = { -+ { .dt_id = MT8192_AP_INFRA }, -+ { .dt_id = MT8192_AP_CAM }, -+ }, -+ .num_lvts_sensor = 2, -+ .offset = 0x200, -+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192, -+ }, -+ { -+ .cal_offset = { 0x3c, 0x40, 0x44 }, -+ .lvts_sensor = { -+ { .dt_id = MT8192_AP_MD0 }, -+ { .dt_id = MT8192_AP_MD1 }, -+ { .dt_id = MT8192_AP_MD2 } -+ }, -+ .num_lvts_sensor = 3, -+ .offset = 0x300, -+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192, -+ } -+}; -+ - static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = { - { - .cal_offset = { 0x04, 0x07 }, -@@ -1415,6 +1498,16 @@ static const struct lvts_data mt7988_lvt - .temp_offset = LVTS_COEFF_B_MT7988, - }; - -+static const struct lvts_data mt8192_lvts_mcu_data = { -+ .lvts_ctrl = mt8192_lvts_mcu_data_ctrl, -+ .num_lvts_ctrl = ARRAY_SIZE(mt8192_lvts_mcu_data_ctrl), -+}; -+ -+static const struct lvts_data mt8192_lvts_ap_data = { -+ .lvts_ctrl = mt8192_lvts_ap_data_ctrl, -+ .num_lvts_ctrl = ARRAY_SIZE(mt8192_lvts_ap_data_ctrl), -+}; -+ - static const struct lvts_data mt8195_lvts_mcu_data = { - .lvts_ctrl = mt8195_lvts_mcu_data_ctrl, - .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl), -@@ -1431,6 +1524,8 @@ static const struct lvts_data mt8195_lvt - - static const struct of_device_id lvts_of_match[] = { - { .compatible = "mediatek,mt7988-lvts-ap", .data = &mt7988_lvts_ap_data }, -+ { .compatible = "mediatek,mt8192-lvts-mcu", .data = &mt8192_lvts_mcu_data }, -+ { .compatible = "mediatek,mt8192-lvts-ap", .data = &mt8192_lvts_ap_data }, - { .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data }, - { .compatible = "mediatek,mt8195-lvts-ap", .data = &mt8195_lvts_ap_data }, - {}, diff --git a/target/linux/mediatek/patches-6.1/830-v6.7-48-thermal-drivers-mediatek-lvts_thermal-Update-calibra.patch b/target/linux/mediatek/patches-6.1/830-v6.7-48-thermal-drivers-mediatek-lvts_thermal-Update-calibra.patch deleted file mode 100644 index c20c0b5f2e3..00000000000 --- a/target/linux/mediatek/patches-6.1/830-v6.7-48-thermal-drivers-mediatek-lvts_thermal-Update-calibra.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 5d126a3c87cf7964b28bacf3826eea4266265bce Mon Sep 17 00:00:00 2001 -From: Balsam CHIHI -Date: Tue, 17 Oct 2023 21:05:45 +0200 -Subject: [PATCH 42/42] thermal/drivers/mediatek/lvts_thermal: Update - calibration data documentation -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Update LVTS calibration data documentation for mt8192 and mt8195. - -Signed-off-by: Balsam CHIHI -Reviewed-by: Nícolas F. R. A. Prado -[bero@baylibre.com: Fix issues pointed out by Nícolas F. R. A. Prado ] -Signed-off-by: Bernhard Rosenkränzer -Reviewed-by: AngeloGioacchino Del Regno -Reviewed-by: Alexandre Mergnat -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20231017190545.157282-6-bero@baylibre.com ---- - drivers/thermal/mediatek/lvts_thermal.c | 31 +++++++++++++++++++++++-- - 1 file changed, 29 insertions(+), 2 deletions(-) - ---- a/drivers/thermal/mediatek/lvts_thermal.c -+++ b/drivers/thermal/mediatek/lvts_thermal.c -@@ -616,7 +616,34 @@ static int lvts_sensor_init(struct devic - * The efuse blob values follows the sensor enumeration per thermal - * controller. The decoding of the stream is as follow: - * -- * stream index map for MCU Domain : -+ * MT8192 : -+ * Stream index map for MCU Domain mt8192 : -+ * -+ * <-----mcu-tc#0-----> <-----sensor#0-----> <-----sensor#1-----> -+ * 0x01 | 0x02 | 0x03 | 0x04 | 0x05 | 0x06 | 0x07 | 0x08 | 0x09 | 0x0A | 0x0B -+ * -+ * <-----sensor#2-----> <-----sensor#3-----> -+ * 0x0C | 0x0D | 0x0E | 0x0F | 0x10 | 0x11 | 0x12 | 0x13 -+ * -+ * <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6-----> <-----sensor#7-----> -+ * 0x14 | 0x15 | 0x16 | 0x17 | 0x18 | 0x19 | 0x1A | 0x1B | 0x1C | 0x1D | 0x1E | 0x1F | 0x20 | 0x21 | 0x22 | 0x23 -+ * -+ * Stream index map for AP Domain mt8192 : -+ * -+ * <-----sensor#0-----> <-----sensor#1-----> -+ * 0x24 | 0x25 | 0x26 | 0x27 | 0x28 | 0x29 | 0x2A | 0x2B -+ * -+ * <-----sensor#2-----> <-----sensor#3-----> -+ * 0x2C | 0x2D | 0x2E | 0x2F | 0x30 | 0x31 | 0x32 | 0x33 -+ * -+ * <-----sensor#4-----> <-----sensor#5-----> -+ * 0x34 | 0x35 | 0x36 | 0x37 | 0x38 | 0x39 | 0x3A | 0x3B -+ * -+ * <-----sensor#6-----> <-----sensor#7-----> <-----sensor#8-----> -+ * 0x3C | 0x3D | 0x3E | 0x3F | 0x40 | 0x41 | 0x42 | 0x43 | 0x44 | 0x45 | 0x46 | 0x47 -+ * -+ * MT8195 : -+ * Stream index map for MCU Domain mt8195 : - * - * <-----mcu-tc#0-----> <-----sensor#0-----> <-----sensor#1-----> - * 0x01 | 0x02 | 0x03 | 0x04 | 0x05 | 0x06 | 0x07 | 0x08 | 0x09 -@@ -627,7 +654,7 @@ static int lvts_sensor_init(struct devic - * <-----mcu-tc#2-----> <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6-----> <-----sensor#7-----> - * 0x13 | 0x14 | 0x15 | 0x16 | 0x17 | 0x18 | 0x19 | 0x1A | 0x1B | 0x1C | 0x1D | 0x1E | 0x1F | 0x20 | 0x21 - * -- * stream index map for AP Domain : -+ * Stream index map for AP Domain mt8195 : - * - * <-----ap--tc#0-----> <-----sensor#0-----> <-----sensor#1-----> - * 0x22 | 0x23 | 0x24 | 0x25 | 0x26 | 0x27 | 0x28 | 0x29 | 0x2A diff --git a/target/linux/mediatek/patches-6.1/831-thermal-drivers-mediatek-Fix-control-buffer-enablement-on-MT7896.patch b/target/linux/mediatek/patches-6.1/831-thermal-drivers-mediatek-Fix-control-buffer-enablement-on-MT7896.patch deleted file mode 100644 index fc173646e05..00000000000 --- a/target/linux/mediatek/patches-6.1/831-thermal-drivers-mediatek-Fix-control-buffer-enablement-on-MT7896.patch +++ /dev/null @@ -1,59 +0,0 @@ -From patchwork Thu Sep 7 11:20:18 2023 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -X-Patchwork-Submitter: Frank Wunderlich -X-Patchwork-Id: 13376356 -From: Frank Wunderlich -To: linux-mediatek@lists.infradead.org -Subject: [PATCH] thermal/drivers/mediatek: Fix control buffer enablement on - MT7896 -Date: Thu, 7 Sep 2023 13:20:18 +0200 -Message-Id: <20230907112018.52811-1-linux@fw-web.de> -X-Mailer: git-send-email 2.34.1 -MIME-Version: 1.0 -X-Mail-ID: e7eeb8e1-00de-41f6-a5df-ce2e9164136e -X-BeenThere: linux-mediatek@lists.infradead.org -X-Mailman-Version: 2.1.34 -Precedence: list -List-Id: -Cc: Daniel Lezcano , - "Rafael J. Wysocki" , linux-pm@vger.kernel.org, - Amit Kucheria , Daniel Golle , - stable@vger.kernel.org, linux-kernel@vger.kernel.org, - Matthias Brugger , Zhang Rui , - linux-arm-kernel@lists.infradead.org, - AngeloGioacchino Del Regno -Sender: "Linux-mediatek" - -From: Frank Wunderlich - -Reading thermal sensor on mt7986 devices returns invalid temperature: - -bpi-r3 ~ # cat /sys/class/thermal/thermal_zone0/temp - -274000 - -Fix this by adding missing members in mtk_thermal_data struct which were -used in mtk_thermal_turn_on_buffer after commit 33140e668b10. - -Cc: stable@vger.kernel.org -Fixes: 33140e668b10 ("thermal/drivers/mediatek: Control buffer enablement tweaks") -Signed-off-by: Frank Wunderlich -Reviewed-by: AngeloGioacchino Del Regno -Reviewed-by: Markus Schneider-Pargmann ---- - drivers/thermal/mediatek/auxadc_thermal.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/drivers/thermal/mediatek/auxadc_thermal.c -+++ b/drivers/thermal/mediatek/auxadc_thermal.c -@@ -691,6 +691,9 @@ static const struct mtk_thermal_data mt7 - .adcpnp = mt7986_adcpnp, - .sensor_mux_values = mt7986_mux_values, - .version = MTK_THERMAL_V3, -+ .apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON1, -+ .apmixed_buffer_ctl_mask = GENMASK(31, 6) | BIT(3), -+ .apmixed_buffer_ctl_set = BIT(0), - }; - - static bool mtk_thermal_temp_is_valid(int temp) diff --git a/target/linux/mediatek/patches-6.1/851-v6.2-i2c-mediatek-add-mt7986-support.patch b/target/linux/mediatek/patches-6.1/851-v6.2-i2c-mediatek-add-mt7986-support.patch deleted file mode 100644 index 4c398c59f93..00000000000 --- a/target/linux/mediatek/patches-6.1/851-v6.2-i2c-mediatek-add-mt7986-support.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 11f9a0f4e51887ad7b4a2898a368fcd0c2984e89 Mon Sep 17 00:00:00 2001 -From: Frank Wunderlich -Date: Sun, 9 Oct 2022 12:16:31 +0200 -Subject: [PATCH 12/16] i2c: mediatek: add mt7986 support - -Add i2c support for MT7986 SoC. - -Signed-off-by: Frank Wunderlich -Reviewed-by: AngeloGioacchino Del Regno -Signed-off-by: Wolfram Sang ---- - drivers/i2c/busses/i2c-mt65xx.c | 14 ++++++++++++++ - 1 file changed, 14 insertions(+) - ---- a/drivers/i2c/busses/i2c-mt65xx.c -+++ b/drivers/i2c/busses/i2c-mt65xx.c -@@ -431,6 +431,19 @@ static const struct mtk_i2c_compatible m - .max_dma_support = 33, - }; - -+static const struct mtk_i2c_compatible mt7986_compat = { -+ .quirks = &mt7622_i2c_quirks, -+ .regs = mt_i2c_regs_v1, -+ .pmic_i2c = 0, -+ .dcm = 1, -+ .auto_restart = 1, -+ .aux_len_reg = 1, -+ .timing_adjust = 0, -+ .dma_sync = 1, -+ .ltiming_adjust = 0, -+ .max_dma_support = 32, -+}; -+ - static const struct mtk_i2c_compatible mt8173_compat = { - .regs = mt_i2c_regs_v1, - .pmic_i2c = 0, -@@ -503,6 +516,7 @@ static const struct of_device_id mtk_i2c - { .compatible = "mediatek,mt6577-i2c", .data = &mt6577_compat }, - { .compatible = "mediatek,mt6589-i2c", .data = &mt6589_compat }, - { .compatible = "mediatek,mt7622-i2c", .data = &mt7622_compat }, -+ { .compatible = "mediatek,mt7986-i2c", .data = &mt7986_compat }, - { .compatible = "mediatek,mt8168-i2c", .data = &mt8168_compat }, - { .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat }, - { .compatible = "mediatek,mt8183-i2c", .data = &mt8183_compat }, diff --git a/target/linux/mediatek/patches-6.1/852-v6.3-i2c-mt65xx-Use-devm_platform_get_and_ioremap_resourc.patch b/target/linux/mediatek/patches-6.1/852-v6.3-i2c-mt65xx-Use-devm_platform_get_and_ioremap_resourc.patch deleted file mode 100644 index 18c66cdac52..00000000000 --- a/target/linux/mediatek/patches-6.1/852-v6.3-i2c-mt65xx-Use-devm_platform_get_and_ioremap_resourc.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 98204ccafd45a8a6109ff2d60e2c179b95d92578 Mon Sep 17 00:00:00 2001 -From: ye xingchen -Date: Thu, 19 Jan 2023 17:19:58 +0800 -Subject: [PATCH 13/16] i2c: mt65xx: Use - devm_platform_get_and_ioremap_resource() - -Convert platform_get_resource(), devm_ioremap_resource() to a single -call to devm_platform_get_and_ioremap_resource(), as this is exactly -what this function does. - -Signed-off-by: ye xingchen -Reviewed-by: AngeloGioacchino Del Regno -Signed-off-by: Wolfram Sang ---- - drivers/i2c/busses/i2c-mt65xx.c | 7 ++----- - 1 file changed, 2 insertions(+), 5 deletions(-) - ---- a/drivers/i2c/busses/i2c-mt65xx.c -+++ b/drivers/i2c/busses/i2c-mt65xx.c -@@ -1366,20 +1366,17 @@ static int mtk_i2c_probe(struct platform - { - int ret = 0; - struct mtk_i2c *i2c; -- struct resource *res; - int i, irq, speed_clk; - - i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); - if (!i2c) - return -ENOMEM; - -- res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- i2c->base = devm_ioremap_resource(&pdev->dev, res); -+ i2c->base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); - if (IS_ERR(i2c->base)) - return PTR_ERR(i2c->base); - -- res = platform_get_resource(pdev, IORESOURCE_MEM, 1); -- i2c->pdmabase = devm_ioremap_resource(&pdev->dev, res); -+ i2c->pdmabase = devm_platform_get_and_ioremap_resource(pdev, 1, NULL); - if (IS_ERR(i2c->pdmabase)) - return PTR_ERR(i2c->pdmabase); - diff --git a/target/linux/mediatek/patches-6.1/853-v6.3-i2c-mt65xx-drop-of_match_ptr-for-ID-table.patch b/target/linux/mediatek/patches-6.1/853-v6.3-i2c-mt65xx-drop-of_match_ptr-for-ID-table.patch deleted file mode 100644 index d000d535226..00000000000 --- a/target/linux/mediatek/patches-6.1/853-v6.3-i2c-mt65xx-drop-of_match_ptr-for-ID-table.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 8106fa2e0ae6082833fe1df97829c46c0183eaea Mon Sep 17 00:00:00 2001 -From: Krzysztof Kozlowski -Date: Sat, 11 Mar 2023 12:16:54 +0100 -Subject: [PATCH 14/16] i2c: mt65xx: drop of_match_ptr for ID table -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The driver can match only via the DT table so the table should be always -used and the of_match_ptr does not have any sense (this also allows ACPI -matching via PRP0001, even though it might not be relevant here). - - drivers/i2c/busses/i2c-mt65xx.c:514:34: error: ‘mtk_i2c_of_match’ defined but not used [-Werror=unused-const-variable=] - -Signed-off-by: Krzysztof Kozlowski -Reviewed-by: Guenter Roeck -Reviewed-by: AngeloGioacchino Del Regno -Signed-off-by: Wolfram Sang ---- - drivers/i2c/busses/i2c-mt65xx.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/i2c/busses/i2c-mt65xx.c -+++ b/drivers/i2c/busses/i2c-mt65xx.c -@@ -1546,7 +1546,7 @@ static struct platform_driver mtk_i2c_dr - .driver = { - .name = I2C_DRV_NAME, - .pm = &mtk_i2c_pm, -- .of_match_table = of_match_ptr(mtk_i2c_of_match), -+ .of_match_table = mtk_i2c_of_match, - }, - }; - diff --git a/target/linux/mediatek/patches-6.1/854-v6.4-i2c-mediatek-add-support-for-MT7981-SoC.patch b/target/linux/mediatek/patches-6.1/854-v6.4-i2c-mediatek-add-support-for-MT7981-SoC.patch deleted file mode 100644 index e0973741e29..00000000000 --- a/target/linux/mediatek/patches-6.1/854-v6.4-i2c-mediatek-add-support-for-MT7981-SoC.patch +++ /dev/null @@ -1,47 +0,0 @@ -From f69f3d662ba3bf999c36d9ac1e684540c4487bc3 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Mon, 10 Apr 2023 17:19:38 +0100 -Subject: [PATCH 15/16] i2c: mediatek: add support for MT7981 SoC - -Add support for the I2C units found in the MediaTek MT7981 and MT7988 -SoCs. Just like other recent MediaTek I2C units that also uses v3 -register offsets (which differ from v2 only by OFFSET_SLAVE_ADDR being -0x94 instead of 0x4). - -Signed-off-by: Daniel Golle -Reviewed-by: AngeloGioacchino Del Regno -Reviewed-by: Alexandre Mergnat -Signed-off-by: Wolfram Sang ---- - drivers/i2c/busses/i2c-mt65xx.c | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - ---- a/drivers/i2c/busses/i2c-mt65xx.c -+++ b/drivers/i2c/busses/i2c-mt65xx.c -@@ -431,6 +431,18 @@ static const struct mtk_i2c_compatible m - .max_dma_support = 33, - }; - -+static const struct mtk_i2c_compatible mt7981_compat = { -+ .regs = mt_i2c_regs_v3, -+ .pmic_i2c = 0, -+ .dcm = 0, -+ .auto_restart = 1, -+ .aux_len_reg = 1, -+ .timing_adjust = 1, -+ .dma_sync = 1, -+ .ltiming_adjust = 1, -+ .max_dma_support = 33 -+}; -+ - static const struct mtk_i2c_compatible mt7986_compat = { - .quirks = &mt7622_i2c_quirks, - .regs = mt_i2c_regs_v1, -@@ -516,6 +528,7 @@ static const struct of_device_id mtk_i2c - { .compatible = "mediatek,mt6577-i2c", .data = &mt6577_compat }, - { .compatible = "mediatek,mt6589-i2c", .data = &mt6589_compat }, - { .compatible = "mediatek,mt7622-i2c", .data = &mt7622_compat }, -+ { .compatible = "mediatek,mt7981-i2c", .data = &mt7981_compat }, - { .compatible = "mediatek,mt7986-i2c", .data = &mt7986_compat }, - { .compatible = "mediatek,mt8168-i2c", .data = &mt8168_compat }, - { .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat }, diff --git a/target/linux/mediatek/patches-6.1/855-i2c-mt65xx-allow-optional-pmic-clock.patch b/target/linux/mediatek/patches-6.1/855-i2c-mt65xx-allow-optional-pmic-clock.patch deleted file mode 100644 index 69cc155d8d2..00000000000 --- a/target/linux/mediatek/patches-6.1/855-i2c-mt65xx-allow-optional-pmic-clock.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 3bf827929a44c17bfb1bf1000b143c02ce26a929 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Sat, 26 Aug 2023 21:56:51 +0100 -Subject: [PATCH] i2c: mt65xx: allow optional pmic clock - -Using the I2C host controller on the MT7981 SoC requires 4 clocks to -be enabled. One of them, the pmic clk, is only enabled in case -'mediatek,have-pmic' is also set which has other consequences which -are not desired in this case. - -Allow defining a pmic clk even in case the 'mediatek,have-pmic' propterty -is not present and the bus is not used to connect to a pmic, but may -still require to enable the pmic clock. - -Signed-off-by: Daniel Golle ---- - drivers/i2c/busses/i2c-mt65xx.c | 12 ++++++++---- - 1 file changed, 8 insertions(+), 4 deletions(-) - ---- a/drivers/i2c/busses/i2c-mt65xx.c -+++ b/drivers/i2c/busses/i2c-mt65xx.c -@@ -1444,15 +1444,19 @@ static int mtk_i2c_probe(struct platform - if (IS_ERR(i2c->clocks[I2C_MT65XX_CLK_ARB].clk)) - return PTR_ERR(i2c->clocks[I2C_MT65XX_CLK_ARB].clk); - -+ i2c->clocks[I2C_MT65XX_CLK_PMIC].clk = devm_clk_get_optional(&pdev->dev, "pmic"); -+ if (IS_ERR(i2c->clocks[I2C_MT65XX_CLK_PMIC].clk)) { -+ dev_err(&pdev->dev, "cannot get pmic clock\n"); -+ return PTR_ERR(i2c->clocks[I2C_MT65XX_CLK_PMIC].clk); -+ } -+ - if (i2c->have_pmic) { -- i2c->clocks[I2C_MT65XX_CLK_PMIC].clk = devm_clk_get(&pdev->dev, "pmic"); -- if (IS_ERR(i2c->clocks[I2C_MT65XX_CLK_PMIC].clk)) { -+ if (!i2c->clocks[I2C_MT65XX_CLK_PMIC].clk) { - dev_err(&pdev->dev, "cannot get pmic clock\n"); -- return PTR_ERR(i2c->clocks[I2C_MT65XX_CLK_PMIC].clk); -+ return -ENODEV; - } - speed_clk = I2C_MT65XX_CLK_PMIC; - } else { -- i2c->clocks[I2C_MT65XX_CLK_PMIC].clk = NULL; - speed_clk = I2C_MT65XX_CLK_MAIN; - } - diff --git a/target/linux/mediatek/patches-6.1/860-v6.6-01-ASoC-mediatek-mt7986-add-common-header.patch b/target/linux/mediatek/patches-6.1/860-v6.6-01-ASoC-mediatek-mt7986-add-common-header.patch deleted file mode 100644 index 9607eec8210..00000000000 --- a/target/linux/mediatek/patches-6.1/860-v6.6-01-ASoC-mediatek-mt7986-add-common-header.patch +++ /dev/null @@ -1,269 +0,0 @@ -From d35469096915f2551ed1d26da1ab12ff500fc963 Mon Sep 17 00:00:00 2001 -From: Maso Huang -Date: Thu, 17 Aug 2023 18:13:33 +0800 -Subject: [PATCH 1/9] ASoC: mediatek: mt7986: add common header - -Add header files for register definition and structure. - -Signed-off-by: Maso Huang -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20230817101338.18782-2-maso.huang@mediatek.com -Signed-off-by: Mark Brown ---- - sound/soc/mediatek/mt7986/mt7986-afe-common.h | 49 +++++ - sound/soc/mediatek/mt7986/mt7986-reg.h | 196 ++++++++++++++++++ - 2 files changed, 245 insertions(+) - create mode 100644 sound/soc/mediatek/mt7986/mt7986-afe-common.h - create mode 100644 sound/soc/mediatek/mt7986/mt7986-reg.h - ---- /dev/null -+++ b/sound/soc/mediatek/mt7986/mt7986-afe-common.h -@@ -0,0 +1,49 @@ -+/* SPDX-License-Identifier: GPL-2.0 */ -+/* -+ * mt7986-afe-common.h -- MediaTek 7986 audio driver definitions -+ * -+ * Copyright (c) 2023 MediaTek Inc. -+ * Authors: Vic Wu -+ * Maso Huang -+ */ -+ -+#ifndef _MT_7986_AFE_COMMON_H_ -+#define _MT_7986_AFE_COMMON_H_ -+ -+#include -+#include -+#include -+#include -+#include "../common/mtk-base-afe.h" -+ -+enum { -+ MT7986_MEMIF_DL1, -+ MT7986_MEMIF_VUL12, -+ MT7986_MEMIF_NUM, -+ MT7986_DAI_ETDM = MT7986_MEMIF_NUM, -+ MT7986_DAI_NUM, -+}; -+ -+enum { -+ MT7986_IRQ_0, -+ MT7986_IRQ_1, -+ MT7986_IRQ_2, -+ MT7986_IRQ_NUM, -+}; -+ -+struct mt7986_afe_private { -+ struct clk_bulk_data *clks; -+ int num_clks; -+ -+ int pm_runtime_bypass_reg_ctl; -+ -+ /* dai */ -+ void *dai_priv[MT7986_DAI_NUM]; -+}; -+ -+unsigned int mt7986_afe_rate_transform(struct device *dev, -+ unsigned int rate); -+ -+/* dai register */ -+int mt7986_dai_etdm_register(struct mtk_base_afe *afe); -+#endif ---- /dev/null -+++ b/sound/soc/mediatek/mt7986/mt7986-reg.h -@@ -0,0 +1,196 @@ -+/* SPDX-License-Identifier: GPL-2.0 */ -+/* -+ * mt7986-reg.h -- MediaTek 7986 audio driver reg definition -+ * -+ * Copyright (c) 2023 MediaTek Inc. -+ * Authors: Vic Wu -+ * Maso Huang -+ */ -+ -+#ifndef _MT7986_REG_H_ -+#define _MT7986_REG_H_ -+ -+#define AUDIO_TOP_CON2 0x0008 -+#define AUDIO_TOP_CON4 0x0010 -+#define AUDIO_ENGEN_CON0 0x0014 -+#define AFE_IRQ_MCU_EN 0x0100 -+#define AFE_IRQ_MCU_STATUS 0x0120 -+#define AFE_IRQ_MCU_CLR 0x0128 -+#define AFE_IRQ0_MCU_CFG0 0x0140 -+#define AFE_IRQ0_MCU_CFG1 0x0144 -+#define AFE_IRQ1_MCU_CFG0 0x0148 -+#define AFE_IRQ1_MCU_CFG1 0x014c -+#define AFE_IRQ2_MCU_CFG0 0x0150 -+#define AFE_IRQ2_MCU_CFG1 0x0154 -+#define ETDM_IN5_CON0 0x13f0 -+#define ETDM_IN5_CON1 0x13f4 -+#define ETDM_IN5_CON2 0x13f8 -+#define ETDM_IN5_CON3 0x13fc -+#define ETDM_IN5_CON4 0x1400 -+#define ETDM_OUT5_CON0 0x1570 -+#define ETDM_OUT5_CON4 0x1580 -+#define ETDM_OUT5_CON5 0x1584 -+#define ETDM_4_7_COWORK_CON0 0x15e0 -+#define ETDM_4_7_COWORK_CON1 0x15e4 -+#define AFE_CONN018_1 0x1b44 -+#define AFE_CONN018_4 0x1b50 -+#define AFE_CONN019_1 0x1b64 -+#define AFE_CONN019_4 0x1b70 -+#define AFE_CONN124_1 0x2884 -+#define AFE_CONN124_4 0x2890 -+#define AFE_CONN125_1 0x28a4 -+#define AFE_CONN125_4 0x28b0 -+#define AFE_CONN_RS_0 0x3920 -+#define AFE_CONN_RS_3 0x392c -+#define AFE_CONN_16BIT_0 0x3960 -+#define AFE_CONN_16BIT_3 0x396c -+#define AFE_CONN_24BIT_0 0x3980 -+#define AFE_CONN_24BIT_3 0x398c -+#define AFE_MEMIF_CON0 0x3d98 -+#define AFE_MEMIF_RD_MON 0x3da0 -+#define AFE_MEMIF_WR_MON 0x3da4 -+#define AFE_DL0_BASE_MSB 0x3e40 -+#define AFE_DL0_BASE 0x3e44 -+#define AFE_DL0_CUR_MSB 0x3e48 -+#define AFE_DL0_CUR 0x3e4c -+#define AFE_DL0_END_MSB 0x3e50 -+#define AFE_DL0_END 0x3e54 -+#define AFE_DL0_RCH_MON 0x3e58 -+#define AFE_DL0_LCH_MON 0x3e5c -+#define AFE_DL0_CON0 0x3e60 -+#define AFE_VUL0_BASE_MSB 0x4220 -+#define AFE_VUL0_BASE 0x4224 -+#define AFE_VUL0_CUR_MSB 0x4228 -+#define AFE_VUL0_CUR 0x422c -+#define AFE_VUL0_END_MSB 0x4230 -+#define AFE_VUL0_END 0x4234 -+#define AFE_VUL0_CON0 0x4238 -+ -+#define AFE_MAX_REGISTER AFE_VUL0_CON0 -+#define AFE_IRQ_STATUS_BITS 0x7 -+#define AFE_IRQ_CNT_SHIFT 0 -+#define AFE_IRQ_CNT_MASK 0xffffff -+ -+/* AUDIO_TOP_CON2 */ -+#define CLK_OUT5_PDN BIT(14) -+#define CLK_OUT5_PDN_MASK BIT(14) -+#define CLK_IN5_PDN BIT(7) -+#define CLK_IN5_PDN_MASK BIT(7) -+ -+/* AUDIO_TOP_CON4 */ -+#define PDN_APLL_TUNER2 BIT(12) -+#define PDN_APLL_TUNER2_MASK BIT(12) -+ -+/* AUDIO_ENGEN_CON0 */ -+#define AUD_APLL2_EN BIT(3) -+#define AUD_APLL2_EN_MASK BIT(3) -+#define AUD_26M_EN BIT(0) -+#define AUD_26M_EN_MASK BIT(0) -+ -+/* AFE_DL0_CON0 */ -+#define DL0_ON_SFT 28 -+#define DL0_ON_MASK 0x1 -+#define DL0_ON_MASK_SFT BIT(28) -+#define DL0_MINLEN_SFT 20 -+#define DL0_MINLEN_MASK 0xf -+#define DL0_MINLEN_MASK_SFT (0xf << 20) -+#define DL0_MODE_SFT 8 -+#define DL0_MODE_MASK 0x1f -+#define DL0_MODE_MASK_SFT (0x1f << 8) -+#define DL0_PBUF_SIZE_SFT 5 -+#define DL0_PBUF_SIZE_MASK 0x3 -+#define DL0_PBUF_SIZE_MASK_SFT (0x3 << 5) -+#define DL0_MONO_SFT 4 -+#define DL0_MONO_MASK 0x1 -+#define DL0_MONO_MASK_SFT BIT(4) -+#define DL0_HALIGN_SFT 2 -+#define DL0_HALIGN_MASK 0x1 -+#define DL0_HALIGN_MASK_SFT BIT(2) -+#define DL0_HD_MODE_SFT 0 -+#define DL0_HD_MODE_MASK 0x3 -+#define DL0_HD_MODE_MASK_SFT (0x3 << 0) -+ -+/* AFE_VUL0_CON0 */ -+#define VUL0_ON_SFT 28 -+#define VUL0_ON_MASK 0x1 -+#define VUL0_ON_MASK_SFT BIT(28) -+#define VUL0_MODE_SFT 8 -+#define VUL0_MODE_MASK 0x1f -+#define VUL0_MODE_MASK_SFT (0x1f << 8) -+#define VUL0_MONO_SFT 4 -+#define VUL0_MONO_MASK 0x1 -+#define VUL0_MONO_MASK_SFT BIT(4) -+#define VUL0_HALIGN_SFT 2 -+#define VUL0_HALIGN_MASK 0x1 -+#define VUL0_HALIGN_MASK_SFT BIT(2) -+#define VUL0_HD_MODE_SFT 0 -+#define VUL0_HD_MODE_MASK 0x3 -+#define VUL0_HD_MODE_MASK_SFT (0x3 << 0) -+ -+/* AFE_IRQ_MCU_CON */ -+#define IRQ_MCU_MODE_SFT 4 -+#define IRQ_MCU_MODE_MASK 0x1f -+#define IRQ_MCU_MODE_MASK_SFT (0x1f << 4) -+#define IRQ_MCU_ON_SFT 0 -+#define IRQ_MCU_ON_MASK 0x1 -+#define IRQ_MCU_ON_MASK_SFT BIT(0) -+#define IRQ0_MCU_CLR_SFT 0 -+#define IRQ0_MCU_CLR_MASK 0x1 -+#define IRQ0_MCU_CLR_MASK_SFT BIT(0) -+#define IRQ1_MCU_CLR_SFT 1 -+#define IRQ1_MCU_CLR_MASK 0x1 -+#define IRQ1_MCU_CLR_MASK_SFT BIT(1) -+#define IRQ2_MCU_CLR_SFT 2 -+#define IRQ2_MCU_CLR_MASK 0x1 -+#define IRQ2_MCU_CLR_MASK_SFT BIT(2) -+ -+/* ETDM_IN5_CON2 */ -+#define IN_CLK_SRC(x) ((x) << 10) -+#define IN_CLK_SRC_SFT 10 -+#define IN_CLK_SRC_MASK GENMASK(12, 10) -+ -+/* ETDM_IN5_CON3 */ -+#define IN_SEL_FS(x) ((x) << 26) -+#define IN_SEL_FS_SFT 26 -+#define IN_SEL_FS_MASK GENMASK(30, 26) -+ -+/* ETDM_IN5_CON4 */ -+#define IN_RELATCH(x) ((x) << 20) -+#define IN_RELATCH_SFT 20 -+#define IN_RELATCH_MASK GENMASK(24, 20) -+#define IN_CLK_INV BIT(18) -+#define IN_CLK_INV_MASK BIT(18) -+ -+/* ETDM_IN5_CON0 & ETDM_OUT5_CON0 */ -+#define RELATCH_SRC_MASK GENMASK(30, 28) -+#define ETDM_CH_NUM_MASK GENMASK(27, 23) -+#define ETDM_WRD_LEN_MASK GENMASK(20, 16) -+#define ETDM_BIT_LEN_MASK GENMASK(15, 11) -+#define ETDM_FMT_MASK GENMASK(8, 6) -+#define ETDM_SYNC BIT(1) -+#define ETDM_SYNC_MASK BIT(1) -+#define ETDM_EN BIT(0) -+#define ETDM_EN_MASK BIT(0) -+ -+/* ETDM_OUT5_CON4 */ -+#define OUT_RELATCH(x) ((x) << 24) -+#define OUT_RELATCH_SFT 24 -+#define OUT_RELATCH_MASK GENMASK(28, 24) -+#define OUT_CLK_SRC(x) ((x) << 6) -+#define OUT_CLK_SRC_SFT 6 -+#define OUT_CLK_SRC_MASK GENMASK(8, 6) -+#define OUT_SEL_FS(x) (x) -+#define OUT_SEL_FS_SFT 0 -+#define OUT_SEL_FS_MASK GENMASK(4, 0) -+ -+/* ETDM_OUT5_CON5 */ -+#define ETDM_CLK_DIV BIT(12) -+#define ETDM_CLK_DIV_MASK BIT(12) -+#define OUT_CLK_INV BIT(9) -+#define OUT_CLK_INV_MASK BIT(9) -+ -+/* ETDM_4_7_COWORK_CON0 */ -+#define OUT_SEL(x) ((x) << 12) -+#define OUT_SEL_SFT 12 -+#define OUT_SEL_MASK GENMASK(15, 12) -+#endif diff --git a/target/linux/mediatek/patches-6.1/860-v6.6-02-ASoC-mediatek-mt7986-support-etdm-in-platform-driver.patch b/target/linux/mediatek/patches-6.1/860-v6.6-02-ASoC-mediatek-mt7986-support-etdm-in-platform-driver.patch deleted file mode 100644 index f22add580fe..00000000000 --- a/target/linux/mediatek/patches-6.1/860-v6.6-02-ASoC-mediatek-mt7986-support-etdm-in-platform-driver.patch +++ /dev/null @@ -1,430 +0,0 @@ -From 948a288897015fb3ee63b3f720b396b590c17fd7 Mon Sep 17 00:00:00 2001 -From: Maso Huang -Date: Thu, 17 Aug 2023 18:13:34 +0800 -Subject: [PATCH 2/9] ASoC: mediatek: mt7986: support etdm in platform driver - -Add mt7986 etdm dai driver support. - -Signed-off-by: Maso Huang -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20230817101338.18782-3-maso.huang@mediatek.com -Signed-off-by: Mark Brown ---- - sound/soc/mediatek/mt7986/mt7986-dai-etdm.c | 411 ++++++++++++++++++++ - 1 file changed, 411 insertions(+) - create mode 100644 sound/soc/mediatek/mt7986/mt7986-dai-etdm.c - ---- /dev/null -+++ b/sound/soc/mediatek/mt7986/mt7986-dai-etdm.c -@@ -0,0 +1,411 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * MediaTek ALSA SoC Audio DAI eTDM Control -+ * -+ * Copyright (c) 2023 MediaTek Inc. -+ * Authors: Vic Wu -+ * Maso Huang -+ */ -+ -+#include -+#include -+#include -+#include -+#include "mt7986-afe-common.h" -+#include "mt7986-reg.h" -+ -+#define HOPPING_CLK 0 -+#define APLL_CLK 1 -+#define MTK_DAI_ETDM_FORMAT_I2S 0 -+#define MTK_DAI_ETDM_FORMAT_DSPA 4 -+#define MTK_DAI_ETDM_FORMAT_DSPB 5 -+ -+enum { -+ MTK_ETDM_RATE_8K = 0, -+ MTK_ETDM_RATE_12K = 1, -+ MTK_ETDM_RATE_16K = 2, -+ MTK_ETDM_RATE_24K = 3, -+ MTK_ETDM_RATE_32K = 4, -+ MTK_ETDM_RATE_48K = 5, -+ MTK_ETDM_RATE_96K = 7, -+ MTK_ETDM_RATE_192K = 9, -+ MTK_ETDM_RATE_11K = 16, -+ MTK_ETDM_RATE_22K = 17, -+ MTK_ETDM_RATE_44K = 18, -+ MTK_ETDM_RATE_88K = 19, -+ MTK_ETDM_RATE_176K = 20, -+}; -+ -+struct mtk_dai_etdm_priv { -+ bool bck_inv; -+ bool lrck_inv; -+ bool slave_mode; -+ unsigned int format; -+}; -+ -+static unsigned int mt7986_etdm_rate_transform(struct device *dev, unsigned int rate) -+{ -+ switch (rate) { -+ case 8000: -+ return MTK_ETDM_RATE_8K; -+ case 11025: -+ return MTK_ETDM_RATE_11K; -+ case 12000: -+ return MTK_ETDM_RATE_12K; -+ case 16000: -+ return MTK_ETDM_RATE_16K; -+ case 22050: -+ return MTK_ETDM_RATE_22K; -+ case 24000: -+ return MTK_ETDM_RATE_24K; -+ case 32000: -+ return MTK_ETDM_RATE_32K; -+ case 44100: -+ return MTK_ETDM_RATE_44K; -+ case 48000: -+ return MTK_ETDM_RATE_48K; -+ case 88200: -+ return MTK_ETDM_RATE_88K; -+ case 96000: -+ return MTK_ETDM_RATE_96K; -+ case 176400: -+ return MTK_ETDM_RATE_176K; -+ case 192000: -+ return MTK_ETDM_RATE_192K; -+ default: -+ dev_warn(dev, "%s(), rate %u invalid, using %d!!!\n", -+ __func__, rate, MTK_ETDM_RATE_48K); -+ return MTK_ETDM_RATE_48K; -+ } -+} -+ -+static int get_etdm_wlen(unsigned int bitwidth) -+{ -+ return bitwidth <= 16 ? 16 : 32; -+} -+ -+/* dai component */ -+/* interconnection */ -+ -+static const struct snd_kcontrol_new o124_mix[] = { -+ SOC_DAPM_SINGLE_AUTODISABLE("I032_Switch", AFE_CONN124_1, 0, 1, 0), -+}; -+ -+static const struct snd_kcontrol_new o125_mix[] = { -+ SOC_DAPM_SINGLE_AUTODISABLE("I033_Switch", AFE_CONN125_1, 1, 1, 0), -+}; -+ -+static const struct snd_soc_dapm_widget mtk_dai_etdm_widgets[] = { -+ -+ /* DL */ -+ SND_SOC_DAPM_MIXER("I150", SND_SOC_NOPM, 0, 0, NULL, 0), -+ SND_SOC_DAPM_MIXER("I151", SND_SOC_NOPM, 0, 0, NULL, 0), -+ /* UL */ -+ SND_SOC_DAPM_MIXER("O124", SND_SOC_NOPM, 0, 0, o124_mix, ARRAY_SIZE(o124_mix)), -+ SND_SOC_DAPM_MIXER("O125", SND_SOC_NOPM, 0, 0, o125_mix, ARRAY_SIZE(o125_mix)), -+}; -+ -+static const struct snd_soc_dapm_route mtk_dai_etdm_routes[] = { -+ {"I150", NULL, "ETDM Capture"}, -+ {"I151", NULL, "ETDM Capture"}, -+ {"ETDM Playback", NULL, "O124"}, -+ {"ETDM Playback", NULL, "O125"}, -+ {"O124", "I032_Switch", "I032"}, -+ {"O125", "I033_Switch", "I033"}, -+}; -+ -+/* dai ops */ -+static int mtk_dai_etdm_startup(struct snd_pcm_substream *substream, -+ struct snd_soc_dai *dai) -+{ -+ struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai); -+ struct mt7986_afe_private *afe_priv = afe->platform_priv; -+ int ret; -+ -+ ret = clk_bulk_prepare_enable(afe_priv->num_clks, afe_priv->clks); -+ if (ret) -+ return dev_err_probe(afe->dev, ret, "Failed to enable clocks\n"); -+ -+ regmap_update_bits(afe->regmap, AUDIO_TOP_CON2, CLK_OUT5_PDN_MASK, 0); -+ regmap_update_bits(afe->regmap, AUDIO_TOP_CON2, CLK_IN5_PDN_MASK, 0); -+ -+ return 0; -+} -+ -+static void mtk_dai_etdm_shutdown(struct snd_pcm_substream *substream, -+ struct snd_soc_dai *dai) -+{ -+ struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai); -+ struct mt7986_afe_private *afe_priv = afe->platform_priv; -+ -+ regmap_update_bits(afe->regmap, AUDIO_TOP_CON2, CLK_OUT5_PDN_MASK, -+ CLK_OUT5_PDN); -+ regmap_update_bits(afe->regmap, AUDIO_TOP_CON2, CLK_IN5_PDN_MASK, -+ CLK_IN5_PDN); -+ -+ clk_bulk_disable_unprepare(afe_priv->num_clks, afe_priv->clks); -+} -+ -+static unsigned int get_etdm_ch_fixup(unsigned int channels) -+{ -+ if (channels > 16) -+ return 24; -+ else if (channels > 8) -+ return 16; -+ else if (channels > 4) -+ return 8; -+ else if (channels > 2) -+ return 4; -+ else -+ return 2; -+} -+ -+static int mtk_dai_etdm_config(struct mtk_base_afe *afe, -+ struct snd_pcm_hw_params *params, -+ struct snd_soc_dai *dai, -+ int stream) -+{ -+ struct mt7986_afe_private *afe_priv = afe->platform_priv; -+ struct mtk_dai_etdm_priv *etdm_data = afe_priv->dai_priv[dai->id]; -+ unsigned int rate = params_rate(params); -+ unsigned int etdm_rate = mt7986_etdm_rate_transform(afe->dev, rate); -+ unsigned int afe_rate = mt7986_afe_rate_transform(afe->dev, rate); -+ unsigned int channels = params_channels(params); -+ unsigned int bit_width = params_width(params); -+ unsigned int wlen = get_etdm_wlen(bit_width); -+ unsigned int val = 0; -+ unsigned int mask = 0; -+ -+ dev_dbg(afe->dev, "%s(), stream %d, rate %u, bitwidth %u\n", -+ __func__, stream, rate, bit_width); -+ -+ /* CON0 */ -+ mask |= ETDM_BIT_LEN_MASK; -+ val |= FIELD_PREP(ETDM_BIT_LEN_MASK, bit_width - 1); -+ mask |= ETDM_WRD_LEN_MASK; -+ val |= FIELD_PREP(ETDM_WRD_LEN_MASK, wlen - 1); -+ mask |= ETDM_FMT_MASK; -+ val |= FIELD_PREP(ETDM_FMT_MASK, etdm_data->format); -+ mask |= ETDM_CH_NUM_MASK; -+ val |= FIELD_PREP(ETDM_CH_NUM_MASK, get_etdm_ch_fixup(channels) - 1); -+ mask |= RELATCH_SRC_MASK; -+ val |= FIELD_PREP(RELATCH_SRC_MASK, APLL_CLK); -+ -+ switch (stream) { -+ case SNDRV_PCM_STREAM_PLAYBACK: -+ /* set ETDM_OUT5_CON0 */ -+ regmap_update_bits(afe->regmap, ETDM_OUT5_CON0, mask, val); -+ -+ /* set ETDM_OUT5_CON4 */ -+ regmap_update_bits(afe->regmap, ETDM_OUT5_CON4, -+ OUT_RELATCH_MASK, OUT_RELATCH(afe_rate)); -+ regmap_update_bits(afe->regmap, ETDM_OUT5_CON4, -+ OUT_CLK_SRC_MASK, OUT_CLK_SRC(APLL_CLK)); -+ regmap_update_bits(afe->regmap, ETDM_OUT5_CON4, -+ OUT_SEL_FS_MASK, OUT_SEL_FS(etdm_rate)); -+ -+ /* set ETDM_OUT5_CON5 */ -+ regmap_update_bits(afe->regmap, ETDM_OUT5_CON5, -+ ETDM_CLK_DIV_MASK, ETDM_CLK_DIV); -+ break; -+ case SNDRV_PCM_STREAM_CAPTURE: -+ /* set ETDM_IN5_CON0 */ -+ regmap_update_bits(afe->regmap, ETDM_IN5_CON0, mask, val); -+ regmap_update_bits(afe->regmap, ETDM_IN5_CON0, -+ ETDM_SYNC_MASK, ETDM_SYNC); -+ -+ /* set ETDM_IN5_CON2 */ -+ regmap_update_bits(afe->regmap, ETDM_IN5_CON2, -+ IN_CLK_SRC_MASK, IN_CLK_SRC(APLL_CLK)); -+ -+ /* set ETDM_IN5_CON3 */ -+ regmap_update_bits(afe->regmap, ETDM_IN5_CON3, -+ IN_SEL_FS_MASK, IN_SEL_FS(etdm_rate)); -+ -+ /* set ETDM_IN5_CON4 */ -+ regmap_update_bits(afe->regmap, ETDM_IN5_CON4, -+ IN_RELATCH_MASK, IN_RELATCH(afe_rate)); -+ break; -+ default: -+ break; -+ } -+ -+ return 0; -+} -+ -+static int mtk_dai_etdm_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params, -+ struct snd_soc_dai *dai) -+{ -+ struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai); -+ -+ mtk_dai_etdm_config(afe, params, dai, SNDRV_PCM_STREAM_PLAYBACK); -+ mtk_dai_etdm_config(afe, params, dai, SNDRV_PCM_STREAM_CAPTURE); -+ -+ return 0; -+} -+ -+static int mtk_dai_etdm_trigger(struct snd_pcm_substream *substream, int cmd, -+ struct snd_soc_dai *dai) -+{ -+ struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai); -+ -+ dev_dbg(afe->dev, "%s(), cmd %d, dai id %d\n", __func__, cmd, dai->id); -+ switch (cmd) { -+ case SNDRV_PCM_TRIGGER_START: -+ case SNDRV_PCM_TRIGGER_RESUME: -+ regmap_update_bits(afe->regmap, ETDM_IN5_CON0, ETDM_EN_MASK, -+ ETDM_EN); -+ regmap_update_bits(afe->regmap, ETDM_OUT5_CON0, ETDM_EN_MASK, -+ ETDM_EN); -+ break; -+ case SNDRV_PCM_TRIGGER_STOP: -+ case SNDRV_PCM_TRIGGER_SUSPEND: -+ regmap_update_bits(afe->regmap, ETDM_IN5_CON0, ETDM_EN_MASK, -+ 0); -+ regmap_update_bits(afe->regmap, ETDM_OUT5_CON0, ETDM_EN_MASK, -+ 0); -+ break; -+ default: -+ break; -+ } -+ -+ return 0; -+} -+ -+static int mtk_dai_etdm_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) -+{ -+ struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai); -+ struct mt7986_afe_private *afe_priv = afe->platform_priv; -+ struct mtk_dai_etdm_priv *etdm_data; -+ void *priv_data; -+ -+ switch (dai->id) { -+ case MT7986_DAI_ETDM: -+ break; -+ default: -+ dev_warn(afe->dev, "%s(), id %d not support\n", -+ __func__, dai->id); -+ return -EINVAL; -+ } -+ -+ priv_data = devm_kzalloc(afe->dev, sizeof(struct mtk_dai_etdm_priv), -+ GFP_KERNEL); -+ if (!priv_data) -+ return -ENOMEM; -+ -+ afe_priv->dai_priv[dai->id] = priv_data; -+ etdm_data = afe_priv->dai_priv[dai->id]; -+ -+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { -+ case SND_SOC_DAIFMT_I2S: -+ etdm_data->format = MTK_DAI_ETDM_FORMAT_I2S; -+ break; -+ case SND_SOC_DAIFMT_DSP_A: -+ etdm_data->format = MTK_DAI_ETDM_FORMAT_DSPA; -+ break; -+ case SND_SOC_DAIFMT_DSP_B: -+ etdm_data->format = MTK_DAI_ETDM_FORMAT_DSPB; -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) { -+ case SND_SOC_DAIFMT_NB_NF: -+ etdm_data->bck_inv = false; -+ etdm_data->lrck_inv = false; -+ break; -+ case SND_SOC_DAIFMT_NB_IF: -+ etdm_data->bck_inv = false; -+ etdm_data->lrck_inv = true; -+ break; -+ case SND_SOC_DAIFMT_IB_NF: -+ etdm_data->bck_inv = true; -+ etdm_data->lrck_inv = false; -+ break; -+ case SND_SOC_DAIFMT_IB_IF: -+ etdm_data->bck_inv = true; -+ etdm_data->lrck_inv = true; -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { -+ case SND_SOC_DAIFMT_CBM_CFM: -+ etdm_data->slave_mode = true; -+ break; -+ case SND_SOC_DAIFMT_CBS_CFS: -+ etdm_data->slave_mode = false; -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+static const struct snd_soc_dai_ops mtk_dai_etdm_ops = { -+ .startup = mtk_dai_etdm_startup, -+ .shutdown = mtk_dai_etdm_shutdown, -+ .hw_params = mtk_dai_etdm_hw_params, -+ .trigger = mtk_dai_etdm_trigger, -+ .set_fmt = mtk_dai_etdm_set_fmt, -+}; -+ -+/* dai driver */ -+#define MTK_ETDM_RATES (SNDRV_PCM_RATE_8000_48000 |\ -+ SNDRV_PCM_RATE_88200 |\ -+ SNDRV_PCM_RATE_96000 |\ -+ SNDRV_PCM_RATE_176400 |\ -+ SNDRV_PCM_RATE_192000) -+ -+#define MTK_ETDM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ -+ SNDRV_PCM_FMTBIT_S24_LE |\ -+ SNDRV_PCM_FMTBIT_S32_LE) -+ -+static struct snd_soc_dai_driver mtk_dai_etdm_driver[] = { -+ { -+ .name = "ETDM", -+ .id = MT7986_DAI_ETDM, -+ .capture = { -+ .stream_name = "ETDM Capture", -+ .channels_min = 1, -+ .channels_max = 2, -+ .rates = MTK_ETDM_RATES, -+ .formats = MTK_ETDM_FORMATS, -+ }, -+ .playback = { -+ .stream_name = "ETDM Playback", -+ .channels_min = 1, -+ .channels_max = 2, -+ .rates = MTK_ETDM_RATES, -+ .formats = MTK_ETDM_FORMATS, -+ }, -+ .ops = &mtk_dai_etdm_ops, -+ .symmetric_rate = 1, -+ .symmetric_sample_bits = 1, -+ }, -+}; -+ -+int mt7986_dai_etdm_register(struct mtk_base_afe *afe) -+{ -+ struct mtk_base_afe_dai *dai; -+ -+ dai = devm_kzalloc(afe->dev, sizeof(*dai), GFP_KERNEL); -+ if (!dai) -+ return -ENOMEM; -+ -+ list_add(&dai->list, &afe->sub_dais); -+ -+ dai->dai_drivers = mtk_dai_etdm_driver; -+ dai->num_dai_drivers = ARRAY_SIZE(mtk_dai_etdm_driver); -+ -+ dai->dapm_widgets = mtk_dai_etdm_widgets; -+ dai->num_dapm_widgets = ARRAY_SIZE(mtk_dai_etdm_widgets); -+ dai->dapm_routes = mtk_dai_etdm_routes; -+ dai->num_dapm_routes = ARRAY_SIZE(mtk_dai_etdm_routes); -+ -+ return 0; -+} diff --git a/target/linux/mediatek/patches-6.1/860-v6.6-03-ASoC-mediatek-mt7986-add-platform-driver.patch b/target/linux/mediatek/patches-6.1/860-v6.6-03-ASoC-mediatek-mt7986-add-platform-driver.patch deleted file mode 100644 index b899b963d20..00000000000 --- a/target/linux/mediatek/patches-6.1/860-v6.6-03-ASoC-mediatek-mt7986-add-platform-driver.patch +++ /dev/null @@ -1,685 +0,0 @@ -From fc7776dee86bc07d22820a904760a95f49a2f12e Mon Sep 17 00:00:00 2001 -From: Maso Huang -Date: Thu, 17 Aug 2023 18:13:35 +0800 -Subject: [PATCH 3/9] ASoC: mediatek: mt7986: add platform driver - -Add mt7986 platform driver. - -Signed-off-by: Maso Huang -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20230817101338.18782-4-maso.huang@mediatek.com -Signed-off-by: Mark Brown ---- - sound/soc/mediatek/Kconfig | 10 + - sound/soc/mediatek/Makefile | 1 + - sound/soc/mediatek/mt7986/Makefile | 8 + - sound/soc/mediatek/mt7986/mt7986-afe-pcm.c | 622 +++++++++++++++++++++ - 4 files changed, 641 insertions(+) - create mode 100644 sound/soc/mediatek/mt7986/Makefile - create mode 100644 sound/soc/mediatek/mt7986/mt7986-afe-pcm.c - ---- a/sound/soc/mediatek/Kconfig -+++ b/sound/soc/mediatek/Kconfig -@@ -54,6 +54,16 @@ config SND_SOC_MT6797_MT6351 - Select Y if you have such device. - If unsure select "N". - -+config SND_SOC_MT7986 -+ tristate "ASoC support for Mediatek MT7986 chip" -+ depends on ARCH_MEDIATEK -+ select SND_SOC_MEDIATEK -+ help -+ This adds ASoC platform driver support for MediaTek MT7986 chip -+ that can be used with other codecs. -+ Select Y if you have such device. -+ If unsure select "N". -+ - config SND_SOC_MT8173 - tristate "ASoC support for Mediatek MT8173 chip" - depends on ARCH_MEDIATEK ---- a/sound/soc/mediatek/Makefile -+++ b/sound/soc/mediatek/Makefile -@@ -2,6 +2,7 @@ - obj-$(CONFIG_SND_SOC_MEDIATEK) += common/ - obj-$(CONFIG_SND_SOC_MT2701) += mt2701/ - obj-$(CONFIG_SND_SOC_MT6797) += mt6797/ -+obj-$(CONFIG_SND_SOC_MT7986) += mt7986/ - obj-$(CONFIG_SND_SOC_MT8173) += mt8173/ - obj-$(CONFIG_SND_SOC_MT8183) += mt8183/ - obj-$(CONFIG_SND_SOC_MT8186) += mt8186/ ---- /dev/null -+++ b/sound/soc/mediatek/mt7986/Makefile -@@ -0,0 +1,8 @@ -+# SPDX-License-Identifier: GPL-2.0 -+ -+# platform driver -+snd-soc-mt7986-afe-objs := \ -+ mt7986-afe-pcm.o \ -+ mt7986-dai-etdm.o -+ -+obj-$(CONFIG_SND_SOC_MT7986) += snd-soc-mt7986-afe.o ---- /dev/null -+++ b/sound/soc/mediatek/mt7986/mt7986-afe-pcm.c -@@ -0,0 +1,622 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * MediaTek ALSA SoC AFE platform driver for MT7986 -+ * -+ * Copyright (c) 2023 MediaTek Inc. -+ * Authors: Vic Wu -+ * Maso Huang -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "mt7986-afe-common.h" -+#include "mt7986-reg.h" -+#include "../common/mtk-afe-platform-driver.h" -+#include "../common/mtk-afe-fe-dai.h" -+ -+enum { -+ MTK_AFE_RATE_8K = 0, -+ MTK_AFE_RATE_11K = 1, -+ MTK_AFE_RATE_12K = 2, -+ MTK_AFE_RATE_16K = 4, -+ MTK_AFE_RATE_22K = 5, -+ MTK_AFE_RATE_24K = 6, -+ MTK_AFE_RATE_32K = 8, -+ MTK_AFE_RATE_44K = 9, -+ MTK_AFE_RATE_48K = 10, -+ MTK_AFE_RATE_88K = 13, -+ MTK_AFE_RATE_96K = 14, -+ MTK_AFE_RATE_176K = 17, -+ MTK_AFE_RATE_192K = 18, -+}; -+ -+enum { -+ CLK_INFRA_AUD_BUS_CK = 0, -+ CLK_INFRA_AUD_26M_CK, -+ CLK_INFRA_AUD_L_CK, -+ CLK_INFRA_AUD_AUD_CK, -+ CLK_INFRA_AUD_EG2_CK, -+ CLK_NUM -+}; -+ -+static const char *aud_clks[CLK_NUM] = { -+ [CLK_INFRA_AUD_BUS_CK] = "aud_bus_ck", -+ [CLK_INFRA_AUD_26M_CK] = "aud_26m_ck", -+ [CLK_INFRA_AUD_L_CK] = "aud_l_ck", -+ [CLK_INFRA_AUD_AUD_CK] = "aud_aud_ck", -+ [CLK_INFRA_AUD_EG2_CK] = "aud_eg2_ck", -+}; -+ -+unsigned int mt7986_afe_rate_transform(struct device *dev, unsigned int rate) -+{ -+ switch (rate) { -+ case 8000: -+ return MTK_AFE_RATE_8K; -+ case 11025: -+ return MTK_AFE_RATE_11K; -+ case 12000: -+ return MTK_AFE_RATE_12K; -+ case 16000: -+ return MTK_AFE_RATE_16K; -+ case 22050: -+ return MTK_AFE_RATE_22K; -+ case 24000: -+ return MTK_AFE_RATE_24K; -+ case 32000: -+ return MTK_AFE_RATE_32K; -+ case 44100: -+ return MTK_AFE_RATE_44K; -+ case 48000: -+ return MTK_AFE_RATE_48K; -+ case 88200: -+ return MTK_AFE_RATE_88K; -+ case 96000: -+ return MTK_AFE_RATE_96K; -+ case 176400: -+ return MTK_AFE_RATE_176K; -+ case 192000: -+ return MTK_AFE_RATE_192K; -+ default: -+ dev_warn(dev, "%s(), rate %u invalid, using %d!!!\n", -+ __func__, rate, MTK_AFE_RATE_48K); -+ return MTK_AFE_RATE_48K; -+ } -+} -+ -+static const struct snd_pcm_hardware mt7986_afe_hardware = { -+ .info = SNDRV_PCM_INFO_MMAP | -+ SNDRV_PCM_INFO_INTERLEAVED | -+ SNDRV_PCM_INFO_MMAP_VALID, -+ .formats = SNDRV_PCM_FMTBIT_S16_LE | -+ SNDRV_PCM_FMTBIT_S24_LE | -+ SNDRV_PCM_FMTBIT_S32_LE, -+ .period_bytes_min = 256, -+ .period_bytes_max = 4 * 48 * 1024, -+ .periods_min = 2, -+ .periods_max = 256, -+ .buffer_bytes_max = 8 * 48 * 1024, -+ .fifo_size = 0, -+}; -+ -+static int mt7986_memif_fs(struct snd_pcm_substream *substream, -+ unsigned int rate) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, AFE_PCM_NAME); -+ struct mtk_base_afe *afe = snd_soc_component_get_drvdata(component); -+ -+ return mt7986_afe_rate_transform(afe->dev, rate); -+} -+ -+static int mt7986_irq_fs(struct snd_pcm_substream *substream, -+ unsigned int rate) -+{ -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, AFE_PCM_NAME); -+ struct mtk_base_afe *afe = snd_soc_component_get_drvdata(component); -+ -+ return mt7986_afe_rate_transform(afe->dev, rate); -+} -+ -+#define MTK_PCM_RATES (SNDRV_PCM_RATE_8000_48000 |\ -+ SNDRV_PCM_RATE_88200 |\ -+ SNDRV_PCM_RATE_96000 |\ -+ SNDRV_PCM_RATE_176400 |\ -+ SNDRV_PCM_RATE_192000) -+ -+#define MTK_PCM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ -+ SNDRV_PCM_FMTBIT_S24_LE |\ -+ SNDRV_PCM_FMTBIT_S32_LE) -+ -+static struct snd_soc_dai_driver mt7986_memif_dai_driver[] = { -+ /* FE DAIs: memory intefaces to CPU */ -+ { -+ .name = "DL1", -+ .id = MT7986_MEMIF_DL1, -+ .playback = { -+ .stream_name = "DL1", -+ .channels_min = 1, -+ .channels_max = 2, -+ .rates = MTK_PCM_RATES, -+ .formats = MTK_PCM_FORMATS, -+ }, -+ .ops = &mtk_afe_fe_ops, -+ }, -+ { -+ .name = "UL1", -+ .id = MT7986_MEMIF_VUL12, -+ .capture = { -+ .stream_name = "UL1", -+ .channels_min = 1, -+ .channels_max = 2, -+ .rates = MTK_PCM_RATES, -+ .formats = MTK_PCM_FORMATS, -+ }, -+ .ops = &mtk_afe_fe_ops, -+ }, -+}; -+ -+static const struct snd_kcontrol_new o018_mix[] = { -+ SOC_DAPM_SINGLE_AUTODISABLE("I150_Switch", AFE_CONN018_4, 22, 1, 0), -+}; -+ -+static const struct snd_kcontrol_new o019_mix[] = { -+ SOC_DAPM_SINGLE_AUTODISABLE("I151_Switch", AFE_CONN019_4, 23, 1, 0), -+}; -+ -+static const struct snd_soc_dapm_widget mt7986_memif_widgets[] = { -+ /* DL */ -+ SND_SOC_DAPM_MIXER("I032", SND_SOC_NOPM, 0, 0, NULL, 0), -+ SND_SOC_DAPM_MIXER("I033", SND_SOC_NOPM, 0, 0, NULL, 0), -+ -+ /* UL */ -+ SND_SOC_DAPM_MIXER("O018", SND_SOC_NOPM, 0, 0, -+ o018_mix, ARRAY_SIZE(o018_mix)), -+ SND_SOC_DAPM_MIXER("O019", SND_SOC_NOPM, 0, 0, -+ o019_mix, ARRAY_SIZE(o019_mix)), -+}; -+ -+static const struct snd_soc_dapm_route mt7986_memif_routes[] = { -+ {"I032", NULL, "DL1"}, -+ {"I033", NULL, "DL1"}, -+ {"UL1", NULL, "O018"}, -+ {"UL1", NULL, "O019"}, -+ {"O018", "I150_Switch", "I150"}, -+ {"O019", "I151_Switch", "I151"}, -+}; -+ -+static const struct snd_soc_component_driver mt7986_afe_pcm_dai_component = { -+ .name = "mt7986-afe-pcm-dai", -+}; -+ -+static const struct mtk_base_memif_data memif_data[MT7986_MEMIF_NUM] = { -+ [MT7986_MEMIF_DL1] = { -+ .name = "DL1", -+ .id = MT7986_MEMIF_DL1, -+ .reg_ofs_base = AFE_DL0_BASE, -+ .reg_ofs_cur = AFE_DL0_CUR, -+ .reg_ofs_end = AFE_DL0_END, -+ .reg_ofs_base_msb = AFE_DL0_BASE_MSB, -+ .reg_ofs_cur_msb = AFE_DL0_CUR_MSB, -+ .reg_ofs_end_msb = AFE_DL0_END_MSB, -+ .fs_reg = AFE_DL0_CON0, -+ .fs_shift = DL0_MODE_SFT, -+ .fs_maskbit = DL0_MODE_MASK, -+ .mono_reg = AFE_DL0_CON0, -+ .mono_shift = DL0_MONO_SFT, -+ .enable_reg = AFE_DL0_CON0, -+ .enable_shift = DL0_ON_SFT, -+ .hd_reg = AFE_DL0_CON0, -+ .hd_shift = DL0_HD_MODE_SFT, -+ .hd_align_reg = AFE_DL0_CON0, -+ .hd_align_mshift = DL0_HALIGN_SFT, -+ .pbuf_reg = AFE_DL0_CON0, -+ .pbuf_shift = DL0_PBUF_SIZE_SFT, -+ .minlen_reg = AFE_DL0_CON0, -+ .minlen_shift = DL0_MINLEN_SFT, -+ }, -+ [MT7986_MEMIF_VUL12] = { -+ .name = "VUL12", -+ .id = MT7986_MEMIF_VUL12, -+ .reg_ofs_base = AFE_VUL0_BASE, -+ .reg_ofs_cur = AFE_VUL0_CUR, -+ .reg_ofs_end = AFE_VUL0_END, -+ .reg_ofs_base_msb = AFE_VUL0_BASE_MSB, -+ .reg_ofs_cur_msb = AFE_VUL0_CUR_MSB, -+ .reg_ofs_end_msb = AFE_VUL0_END_MSB, -+ .fs_reg = AFE_VUL0_CON0, -+ .fs_shift = VUL0_MODE_SFT, -+ .fs_maskbit = VUL0_MODE_MASK, -+ .mono_reg = AFE_VUL0_CON0, -+ .mono_shift = VUL0_MONO_SFT, -+ .enable_reg = AFE_VUL0_CON0, -+ .enable_shift = VUL0_ON_SFT, -+ .hd_reg = AFE_VUL0_CON0, -+ .hd_shift = VUL0_HD_MODE_SFT, -+ .hd_align_reg = AFE_VUL0_CON0, -+ .hd_align_mshift = VUL0_HALIGN_SFT, -+ }, -+}; -+ -+static const struct mtk_base_irq_data irq_data[MT7986_IRQ_NUM] = { -+ [MT7986_IRQ_0] = { -+ .id = MT7986_IRQ_0, -+ .irq_cnt_reg = AFE_IRQ0_MCU_CFG1, -+ .irq_cnt_shift = AFE_IRQ_CNT_SHIFT, -+ .irq_cnt_maskbit = AFE_IRQ_CNT_MASK, -+ .irq_fs_reg = AFE_IRQ0_MCU_CFG0, -+ .irq_fs_shift = IRQ_MCU_MODE_SFT, -+ .irq_fs_maskbit = IRQ_MCU_MODE_MASK, -+ .irq_en_reg = AFE_IRQ0_MCU_CFG0, -+ .irq_en_shift = IRQ_MCU_ON_SFT, -+ .irq_clr_reg = AFE_IRQ_MCU_CLR, -+ .irq_clr_shift = IRQ0_MCU_CLR_SFT, -+ }, -+ [MT7986_IRQ_1] = { -+ .id = MT7986_IRQ_1, -+ .irq_cnt_reg = AFE_IRQ1_MCU_CFG1, -+ .irq_cnt_shift = AFE_IRQ_CNT_SHIFT, -+ .irq_cnt_maskbit = AFE_IRQ_CNT_MASK, -+ .irq_fs_reg = AFE_IRQ1_MCU_CFG0, -+ .irq_fs_shift = IRQ_MCU_MODE_SFT, -+ .irq_fs_maskbit = IRQ_MCU_MODE_MASK, -+ .irq_en_reg = AFE_IRQ1_MCU_CFG0, -+ .irq_en_shift = IRQ_MCU_ON_SFT, -+ .irq_clr_reg = AFE_IRQ_MCU_CLR, -+ .irq_clr_shift = IRQ1_MCU_CLR_SFT, -+ }, -+ [MT7986_IRQ_2] = { -+ .id = MT7986_IRQ_2, -+ .irq_cnt_reg = AFE_IRQ2_MCU_CFG1, -+ .irq_cnt_shift = AFE_IRQ_CNT_SHIFT, -+ .irq_cnt_maskbit = AFE_IRQ_CNT_MASK, -+ .irq_fs_reg = AFE_IRQ2_MCU_CFG0, -+ .irq_fs_shift = IRQ_MCU_MODE_SFT, -+ .irq_fs_maskbit = IRQ_MCU_MODE_MASK, -+ .irq_en_reg = AFE_IRQ2_MCU_CFG0, -+ .irq_en_shift = IRQ_MCU_ON_SFT, -+ .irq_clr_reg = AFE_IRQ_MCU_CLR, -+ .irq_clr_shift = IRQ2_MCU_CLR_SFT, -+ }, -+}; -+ -+static bool mt7986_is_volatile_reg(struct device *dev, unsigned int reg) -+{ -+ /* -+ * Those auto-gen regs are read-only, so put it as volatile because -+ * volatile registers cannot be cached, which means that they cannot -+ * be set when power is off -+ */ -+ -+ switch (reg) { -+ case AFE_DL0_CUR_MSB: -+ case AFE_DL0_CUR: -+ case AFE_DL0_RCH_MON: -+ case AFE_DL0_LCH_MON: -+ case AFE_VUL0_CUR_MSB: -+ case AFE_VUL0_CUR: -+ case AFE_IRQ_MCU_STATUS: -+ case AFE_MEMIF_RD_MON: -+ case AFE_MEMIF_WR_MON: -+ return true; -+ default: -+ return false; -+ }; -+} -+ -+static const struct regmap_config mt7986_afe_regmap_config = { -+ .reg_bits = 32, -+ .reg_stride = 4, -+ .val_bits = 32, -+ .volatile_reg = mt7986_is_volatile_reg, -+ .max_register = AFE_MAX_REGISTER, -+ .num_reg_defaults_raw = ((AFE_MAX_REGISTER / 4) + 1), -+}; -+ -+static int mt7986_init_clock(struct mtk_base_afe *afe) -+{ -+ struct mt7986_afe_private *afe_priv = afe->platform_priv; -+ int ret, i; -+ -+ afe_priv->clks = devm_kcalloc(afe->dev, CLK_NUM, -+ sizeof(*afe_priv->clks), GFP_KERNEL); -+ if (!afe_priv->clks) -+ return -ENOMEM; -+ afe_priv->num_clks = CLK_NUM; -+ -+ for (i = 0; i < afe_priv->num_clks; i++) -+ afe_priv->clks[i].id = aud_clks[i]; -+ -+ ret = devm_clk_bulk_get(afe->dev, afe_priv->num_clks, afe_priv->clks); -+ if (ret) -+ return dev_err_probe(afe->dev, ret, "Failed to get clocks\n"); -+ -+ return 0; -+} -+ -+static irqreturn_t mt7986_afe_irq_handler(int irq_id, void *dev) -+{ -+ struct mtk_base_afe *afe = dev; -+ struct mtk_base_afe_irq *irq; -+ u32 mcu_en, status, status_mcu; -+ int i, ret; -+ irqreturn_t irq_ret = IRQ_HANDLED; -+ -+ /* get irq that is sent to MCU */ -+ regmap_read(afe->regmap, AFE_IRQ_MCU_EN, &mcu_en); -+ -+ ret = regmap_read(afe->regmap, AFE_IRQ_MCU_STATUS, &status); -+ /* only care IRQ which is sent to MCU */ -+ status_mcu = status & mcu_en & AFE_IRQ_STATUS_BITS; -+ -+ if (ret || status_mcu == 0) { -+ dev_err(afe->dev, "%s(), irq status err, ret %d, status 0x%x, mcu_en 0x%x\n", -+ __func__, ret, status, mcu_en); -+ -+ irq_ret = IRQ_NONE; -+ goto err_irq; -+ } -+ -+ for (i = 0; i < MT7986_MEMIF_NUM; i++) { -+ struct mtk_base_afe_memif *memif = &afe->memif[i]; -+ -+ if (!memif->substream) -+ continue; -+ -+ if (memif->irq_usage < 0) -+ continue; -+ -+ irq = &afe->irqs[memif->irq_usage]; -+ -+ if (status_mcu & (1 << irq->irq_data->irq_en_shift)) -+ snd_pcm_period_elapsed(memif->substream); -+ } -+ -+err_irq: -+ /* clear irq */ -+ regmap_write(afe->regmap, AFE_IRQ_MCU_CLR, status_mcu); -+ -+ return irq_ret; -+} -+ -+static int mt7986_afe_runtime_suspend(struct device *dev) -+{ -+ struct mtk_base_afe *afe = dev_get_drvdata(dev); -+ struct mt7986_afe_private *afe_priv = afe->platform_priv; -+ -+ if (!afe->regmap || afe_priv->pm_runtime_bypass_reg_ctl) -+ goto skip_regmap; -+ -+ /* disable clk*/ -+ regmap_update_bits(afe->regmap, AUDIO_TOP_CON4, 0x3fff, 0x3fff); -+ regmap_update_bits(afe->regmap, AUDIO_ENGEN_CON0, AUD_APLL2_EN_MASK, 0); -+ regmap_update_bits(afe->regmap, AUDIO_ENGEN_CON0, AUD_26M_EN_MASK, 0); -+ -+ /* make sure all irq status are cleared, twice intended */ -+ regmap_update_bits(afe->regmap, AFE_IRQ_MCU_CLR, 0xffff, 0xffff); -+ -+skip_regmap: -+ clk_bulk_disable_unprepare(afe_priv->num_clks, afe_priv->clks); -+ -+ return 0; -+} -+ -+static int mt7986_afe_runtime_resume(struct device *dev) -+{ -+ struct mtk_base_afe *afe = dev_get_drvdata(dev); -+ struct mt7986_afe_private *afe_priv = afe->platform_priv; -+ int ret; -+ -+ ret = clk_bulk_prepare_enable(afe_priv->num_clks, afe_priv->clks); -+ if (ret) -+ return dev_err_probe(afe->dev, ret, "Failed to enable clocks\n"); -+ -+ if (!afe->regmap || afe_priv->pm_runtime_bypass_reg_ctl) -+ return 0; -+ -+ /* enable clk*/ -+ regmap_update_bits(afe->regmap, AUDIO_TOP_CON4, 0x3fff, 0); -+ regmap_update_bits(afe->regmap, AUDIO_ENGEN_CON0, AUD_APLL2_EN_MASK, -+ AUD_APLL2_EN); -+ regmap_update_bits(afe->regmap, AUDIO_ENGEN_CON0, AUD_26M_EN_MASK, -+ AUD_26M_EN); -+ -+ return 0; -+} -+ -+static int mt7986_afe_component_probe(struct snd_soc_component *component) -+{ -+ return mtk_afe_add_sub_dai_control(component); -+} -+ -+static const struct snd_soc_component_driver mt7986_afe_component = { -+ .name = AFE_PCM_NAME, -+ .probe = mt7986_afe_component_probe, -+ .pointer = mtk_afe_pcm_pointer, -+ .pcm_construct = mtk_afe_pcm_new, -+}; -+ -+static int mt7986_dai_memif_register(struct mtk_base_afe *afe) -+{ -+ struct mtk_base_afe_dai *dai; -+ -+ dai = devm_kzalloc(afe->dev, sizeof(*dai), GFP_KERNEL); -+ if (!dai) -+ return -ENOMEM; -+ -+ list_add(&dai->list, &afe->sub_dais); -+ -+ dai->dai_drivers = mt7986_memif_dai_driver; -+ dai->num_dai_drivers = ARRAY_SIZE(mt7986_memif_dai_driver); -+ -+ dai->dapm_widgets = mt7986_memif_widgets; -+ dai->num_dapm_widgets = ARRAY_SIZE(mt7986_memif_widgets); -+ dai->dapm_routes = mt7986_memif_routes; -+ dai->num_dapm_routes = ARRAY_SIZE(mt7986_memif_routes); -+ -+ return 0; -+} -+ -+typedef int (*dai_register_cb)(struct mtk_base_afe *); -+static const dai_register_cb dai_register_cbs[] = { -+ mt7986_dai_etdm_register, -+ mt7986_dai_memif_register, -+}; -+ -+static int mt7986_afe_pcm_dev_probe(struct platform_device *pdev) -+{ -+ struct mtk_base_afe *afe; -+ struct mt7986_afe_private *afe_priv; -+ struct device *dev; -+ int i, irq_id, ret; -+ -+ afe = devm_kzalloc(&pdev->dev, sizeof(*afe), GFP_KERNEL); -+ if (!afe) -+ return -ENOMEM; -+ platform_set_drvdata(pdev, afe); -+ -+ afe->platform_priv = devm_kzalloc(&pdev->dev, sizeof(*afe_priv), -+ GFP_KERNEL); -+ if (!afe->platform_priv) -+ return -ENOMEM; -+ -+ afe_priv = afe->platform_priv; -+ afe->dev = &pdev->dev; -+ dev = afe->dev; -+ -+ afe->base_addr = devm_platform_ioremap_resource(pdev, 0); -+ if (IS_ERR(afe->base_addr)) -+ return PTR_ERR(afe->base_addr); -+ -+ /* initial audio related clock */ -+ ret = mt7986_init_clock(afe); -+ if (ret) -+ return dev_err_probe(dev, ret, "Cannot initialize clocks\n"); -+ -+ ret = devm_pm_runtime_enable(dev); -+ if (ret) -+ return ret; -+ -+ /* enable clock for regcache get default value from hw */ -+ afe_priv->pm_runtime_bypass_reg_ctl = true; -+ pm_runtime_get_sync(&pdev->dev); -+ -+ afe->regmap = devm_regmap_init_mmio(&pdev->dev, afe->base_addr, -+ &mt7986_afe_regmap_config); -+ -+ pm_runtime_put_sync(&pdev->dev); -+ if (IS_ERR(afe->regmap)) -+ return PTR_ERR(afe->regmap); -+ -+ afe_priv->pm_runtime_bypass_reg_ctl = false; -+ -+ /* init memif */ -+ afe->memif_size = MT7986_MEMIF_NUM; -+ afe->memif = devm_kcalloc(dev, afe->memif_size, sizeof(*afe->memif), -+ GFP_KERNEL); -+ if (!afe->memif) -+ return -ENOMEM; -+ -+ for (i = 0; i < afe->memif_size; i++) { -+ afe->memif[i].data = &memif_data[i]; -+ afe->memif[i].irq_usage = -1; -+ } -+ -+ mutex_init(&afe->irq_alloc_lock); -+ -+ /* irq initialize */ -+ afe->irqs_size = MT7986_IRQ_NUM; -+ afe->irqs = devm_kcalloc(dev, afe->irqs_size, sizeof(*afe->irqs), -+ GFP_KERNEL); -+ if (!afe->irqs) -+ return -ENOMEM; -+ -+ for (i = 0; i < afe->irqs_size; i++) -+ afe->irqs[i].irq_data = &irq_data[i]; -+ -+ /* request irq */ -+ irq_id = platform_get_irq(pdev, 0); -+ if (irq_id < 0) { -+ ret = irq_id; -+ return dev_err_probe(dev, ret, "No irq found\n"); -+ } -+ ret = devm_request_irq(dev, irq_id, mt7986_afe_irq_handler, -+ IRQF_TRIGGER_NONE, "asys-isr", (void *)afe); -+ if (ret) -+ return dev_err_probe(dev, ret, "Failed to request irq for asys-isr\n"); -+ -+ /* init sub_dais */ -+ INIT_LIST_HEAD(&afe->sub_dais); -+ -+ for (i = 0; i < ARRAY_SIZE(dai_register_cbs); i++) { -+ ret = dai_register_cbs[i](afe); -+ if (ret) -+ return dev_err_probe(dev, ret, "DAI register failed, i: %d\n", i); -+ } -+ -+ /* init dai_driver and component_driver */ -+ ret = mtk_afe_combine_sub_dai(afe); -+ if (ret) -+ return dev_err_probe(dev, ret, "mtk_afe_combine_sub_dai fail\n"); -+ -+ afe->mtk_afe_hardware = &mt7986_afe_hardware; -+ afe->memif_fs = mt7986_memif_fs; -+ afe->irq_fs = mt7986_irq_fs; -+ -+ afe->runtime_resume = mt7986_afe_runtime_resume; -+ afe->runtime_suspend = mt7986_afe_runtime_suspend; -+ -+ /* register component */ -+ ret = devm_snd_soc_register_component(&pdev->dev, -+ &mt7986_afe_component, -+ NULL, 0); -+ if (ret) -+ return dev_err_probe(dev, ret, "Cannot register AFE component\n"); -+ -+ ret = devm_snd_soc_register_component(afe->dev, -+ &mt7986_afe_pcm_dai_component, -+ afe->dai_drivers, -+ afe->num_dai_drivers); -+ if (ret) -+ return dev_err_probe(dev, ret, "Cannot register PCM DAI component\n"); -+ -+ return 0; -+} -+ -+static void mt7986_afe_pcm_dev_remove(struct platform_device *pdev) -+{ -+ pm_runtime_disable(&pdev->dev); -+ if (!pm_runtime_status_suspended(&pdev->dev)) -+ mt7986_afe_runtime_suspend(&pdev->dev); -+} -+ -+static const struct of_device_id mt7986_afe_pcm_dt_match[] = { -+ { .compatible = "mediatek,mt7986-afe" }, -+ { /* sentinel */ } -+}; -+MODULE_DEVICE_TABLE(of, mt7986_afe_pcm_dt_match); -+ -+static const struct dev_pm_ops mt7986_afe_pm_ops = { -+ SET_RUNTIME_PM_OPS(mt7986_afe_runtime_suspend, -+ mt7986_afe_runtime_resume, NULL) -+}; -+ -+static struct platform_driver mt7986_afe_pcm_driver = { -+ .driver = { -+ .name = "mt7986-audio", -+ .of_match_table = mt7986_afe_pcm_dt_match, -+ .pm = &mt7986_afe_pm_ops, -+ }, -+ .probe = mt7986_afe_pcm_dev_probe, -+ .remove_new = mt7986_afe_pcm_dev_remove, -+}; -+module_platform_driver(mt7986_afe_pcm_driver); -+ -+MODULE_DESCRIPTION("MediaTek SoC AFE platform driver for ALSA MT7986"); -+MODULE_AUTHOR("Vic Wu "); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/mediatek/patches-6.1/860-v6.6-04-ASoC-mediatek-mt7986-add-machine-driver-with-wm8960.patch b/target/linux/mediatek/patches-6.1/860-v6.6-04-ASoC-mediatek-mt7986-add-machine-driver-with-wm8960.patch deleted file mode 100644 index dd354c04e3d..00000000000 --- a/target/linux/mediatek/patches-6.1/860-v6.6-04-ASoC-mediatek-mt7986-add-machine-driver-with-wm8960.patch +++ /dev/null @@ -1,243 +0,0 @@ -From ddf6abc1c78072f8ccad59166be95f0ca5af8ca4 Mon Sep 17 00:00:00 2001 -From: Maso Huang -Date: Thu, 17 Aug 2023 18:13:36 +0800 -Subject: [PATCH 4/9] ASoC: mediatek: mt7986: add machine driver with wm8960 - -Add support for mt7986 board with wm8960. - -Signed-off-by: Maso Huang -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20230817101338.18782-5-maso.huang@mediatek.com -Signed-off-by: Mark Brown ---- - sound/soc/mediatek/Kconfig | 10 ++ - sound/soc/mediatek/mt7986/Makefile | 1 + - sound/soc/mediatek/mt7986/mt7986-wm8960.c | 196 ++++++++++++++++++++++ - 3 files changed, 207 insertions(+) - create mode 100644 sound/soc/mediatek/mt7986/mt7986-wm8960.c - ---- a/sound/soc/mediatek/Kconfig -+++ b/sound/soc/mediatek/Kconfig -@@ -64,6 +64,16 @@ config SND_SOC_MT7986 - Select Y if you have such device. - If unsure select "N". - -+config SND_SOC_MT7986_WM8960 -+ tristate "ASoc Audio driver for MT7986 with WM8960 codec" -+ depends on SND_SOC_MT7986 && I2C -+ select SND_SOC_WM8960 -+ help -+ This adds support for ASoC machine driver for MediaTek MT7986 -+ boards with the WM8960 codecs. -+ Select Y if you have such device. -+ If unsure select "N". -+ - config SND_SOC_MT8173 - tristate "ASoC support for Mediatek MT8173 chip" - depends on ARCH_MEDIATEK ---- a/sound/soc/mediatek/mt7986/Makefile -+++ b/sound/soc/mediatek/mt7986/Makefile -@@ -6,3 +6,4 @@ snd-soc-mt7986-afe-objs := \ - mt7986-dai-etdm.o - - obj-$(CONFIG_SND_SOC_MT7986) += snd-soc-mt7986-afe.o -+obj-$(CONFIG_SND_SOC_MT7986_WM8960) += mt7986-wm8960.o ---- /dev/null -+++ b/sound/soc/mediatek/mt7986/mt7986-wm8960.c -@@ -0,0 +1,196 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * mt7986-wm8960.c -- MT7986-WM8960 ALSA SoC machine driver -+ * -+ * Copyright (c) 2023 MediaTek Inc. -+ * Authors: Vic Wu -+ * Maso Huang -+ */ -+ -+#include -+#include -+ -+#include "mt7986-afe-common.h" -+ -+struct mt7986_wm8960_priv { -+ struct device_node *platform_node; -+ struct device_node *codec_node; -+}; -+ -+static const struct snd_soc_dapm_widget mt7986_wm8960_widgets[] = { -+ SND_SOC_DAPM_HP("Headphone", NULL), -+ SND_SOC_DAPM_MIC("AMIC", NULL), -+}; -+ -+static const struct snd_kcontrol_new mt7986_wm8960_controls[] = { -+ SOC_DAPM_PIN_SWITCH("Headphone"), -+ SOC_DAPM_PIN_SWITCH("AMIC"), -+}; -+ -+SND_SOC_DAILINK_DEFS(playback, -+ DAILINK_COMP_ARRAY(COMP_CPU("DL1")), -+ DAILINK_COMP_ARRAY(COMP_DUMMY()), -+ DAILINK_COMP_ARRAY(COMP_EMPTY())); -+ -+SND_SOC_DAILINK_DEFS(capture, -+ DAILINK_COMP_ARRAY(COMP_CPU("UL1")), -+ DAILINK_COMP_ARRAY(COMP_DUMMY()), -+ DAILINK_COMP_ARRAY(COMP_EMPTY())); -+ -+SND_SOC_DAILINK_DEFS(codec, -+ DAILINK_COMP_ARRAY(COMP_CPU("ETDM")), -+ DAILINK_COMP_ARRAY(COMP_CODEC(NULL, "wm8960-hifi")), -+ DAILINK_COMP_ARRAY(COMP_EMPTY())); -+ -+static struct snd_soc_dai_link mt7986_wm8960_dai_links[] = { -+ /* FE */ -+ { -+ .name = "wm8960-playback", -+ .stream_name = "wm8960-playback", -+ .trigger = {SND_SOC_DPCM_TRIGGER_POST, -+ SND_SOC_DPCM_TRIGGER_POST}, -+ .dynamic = 1, -+ .dpcm_playback = 1, -+ SND_SOC_DAILINK_REG(playback), -+ }, -+ { -+ .name = "wm8960-capture", -+ .stream_name = "wm8960-capture", -+ .trigger = {SND_SOC_DPCM_TRIGGER_POST, -+ SND_SOC_DPCM_TRIGGER_POST}, -+ .dynamic = 1, -+ .dpcm_capture = 1, -+ SND_SOC_DAILINK_REG(capture), -+ }, -+ /* BE */ -+ { -+ .name = "wm8960-codec", -+ .no_pcm = 1, -+ .dai_fmt = SND_SOC_DAIFMT_I2S | -+ SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBS_CFS | -+ SND_SOC_DAIFMT_GATED, -+ .dpcm_playback = 1, -+ .dpcm_capture = 1, -+ SND_SOC_DAILINK_REG(codec), -+ }, -+}; -+ -+static struct snd_soc_card mt7986_wm8960_card = { -+ .name = "mt7986-wm8960", -+ .owner = THIS_MODULE, -+ .dai_link = mt7986_wm8960_dai_links, -+ .num_links = ARRAY_SIZE(mt7986_wm8960_dai_links), -+ .controls = mt7986_wm8960_controls, -+ .num_controls = ARRAY_SIZE(mt7986_wm8960_controls), -+ .dapm_widgets = mt7986_wm8960_widgets, -+ .num_dapm_widgets = ARRAY_SIZE(mt7986_wm8960_widgets), -+}; -+ -+static int mt7986_wm8960_machine_probe(struct platform_device *pdev) -+{ -+ struct snd_soc_card *card = &mt7986_wm8960_card; -+ struct snd_soc_dai_link *dai_link; -+ struct device_node *platform, *codec; -+ struct mt7986_wm8960_priv *priv; -+ int ret, i; -+ -+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ platform = of_get_child_by_name(pdev->dev.of_node, "platform"); -+ -+ if (platform) { -+ priv->platform_node = of_parse_phandle(platform, "sound-dai", 0); -+ of_node_put(platform); -+ -+ if (!priv->platform_node) { -+ dev_err(&pdev->dev, "Failed to parse platform/sound-dai property\n"); -+ return -EINVAL; -+ } -+ } else { -+ dev_err(&pdev->dev, "Property 'platform' missing or invalid\n"); -+ return -EINVAL; -+ } -+ -+ for_each_card_prelinks(card, i, dai_link) { -+ if (dai_link->platforms->name) -+ continue; -+ dai_link->platforms->of_node = priv->platform_node; -+ } -+ -+ card->dev = &pdev->dev; -+ -+ codec = of_get_child_by_name(pdev->dev.of_node, "codec"); -+ -+ if (codec) { -+ priv->codec_node = of_parse_phandle(codec, "sound-dai", 0); -+ of_node_put(codec); -+ -+ if (!priv->codec_node) { -+ of_node_put(priv->platform_node); -+ dev_err(&pdev->dev, "Failed to parse codec/sound-dai property\n"); -+ return -EINVAL; -+ } -+ } else { -+ of_node_put(priv->platform_node); -+ dev_err(&pdev->dev, "Property 'codec' missing or invalid\n"); -+ return -EINVAL; -+ } -+ -+ for_each_card_prelinks(card, i, dai_link) { -+ if (dai_link->codecs->name) -+ continue; -+ dai_link->codecs->of_node = priv->codec_node; -+ } -+ -+ ret = snd_soc_of_parse_audio_routing(card, "audio-routing"); -+ if (ret) { -+ dev_err(&pdev->dev, "Failed to parse audio-routing: %d\n", ret); -+ goto err_of_node_put; -+ } -+ -+ ret = devm_snd_soc_register_card(&pdev->dev, card); -+ if (ret) { -+ dev_err(&pdev->dev, "%s snd_soc_register_card fail: %d\n", __func__, ret); -+ goto err_of_node_put; -+ } -+ -+err_of_node_put: -+ of_node_put(priv->codec_node); -+ of_node_put(priv->platform_node); -+ return ret; -+} -+ -+static void mt7986_wm8960_machine_remove(struct platform_device *pdev) -+{ -+ struct snd_soc_card *card = platform_get_drvdata(pdev); -+ struct mt7986_wm8960_priv *priv = snd_soc_card_get_drvdata(card); -+ -+ of_node_put(priv->codec_node); -+ of_node_put(priv->platform_node); -+} -+ -+static const struct of_device_id mt7986_wm8960_machine_dt_match[] = { -+ {.compatible = "mediatek,mt7986-wm8960-sound"}, -+ { /* sentinel */ } -+}; -+MODULE_DEVICE_TABLE(of, mt7986_wm8960_machine_dt_match); -+ -+static struct platform_driver mt7986_wm8960_machine = { -+ .driver = { -+ .name = "mt7986-wm8960", -+ .of_match_table = mt7986_wm8960_machine_dt_match, -+ }, -+ .probe = mt7986_wm8960_machine_probe, -+ .remove_new = mt7986_wm8960_machine_remove, -+}; -+ -+module_platform_driver(mt7986_wm8960_machine); -+ -+/* Module information */ -+MODULE_DESCRIPTION("MT7986 WM8960 ALSA SoC machine driver"); -+MODULE_AUTHOR("Vic Wu "); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS("mt7986 wm8960 soc card"); diff --git a/target/linux/mediatek/patches-6.1/860-v6.6-05-ASoC-dt-bindings-mediatek-mt7986-wm8960-add-mt7986-w.patch b/target/linux/mediatek/patches-6.1/860-v6.6-05-ASoC-dt-bindings-mediatek-mt7986-wm8960-add-mt7986-w.patch deleted file mode 100644 index 8cf0b5464a9..00000000000 --- a/target/linux/mediatek/patches-6.1/860-v6.6-05-ASoC-dt-bindings-mediatek-mt7986-wm8960-add-mt7986-w.patch +++ /dev/null @@ -1,87 +0,0 @@ -From 72469f950b629e57e60fbcbefed45e083619b986 Mon Sep 17 00:00:00 2001 -From: Maso Huang -Date: Thu, 17 Aug 2023 18:13:37 +0800 -Subject: [PATCH 5/9] ASoC: dt-bindings: mediatek,mt7986-wm8960: add - mt7986-wm8960 document - -Add document for mt7986 board with wm8960. - -Signed-off-by: Maso Huang -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20230817101338.18782-6-maso.huang@mediatek.com -Signed-off-by: Mark Brown ---- - .../sound/mediatek,mt7986-wm8960.yaml | 67 +++++++++++++++++++ - 1 file changed, 67 insertions(+) - create mode 100644 Documentation/devicetree/bindings/sound/mediatek,mt7986-wm8960.yaml - ---- /dev/null -+++ b/Documentation/devicetree/bindings/sound/mediatek,mt7986-wm8960.yaml -@@ -0,0 +1,67 @@ -+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/sound/mediatek,mt7986-wm8960.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: MediaTek MT7986 sound card with WM8960 codec -+ -+maintainers: -+ - Maso Huang -+ -+allOf: -+ - $ref: sound-card-common.yaml# -+ -+properties: -+ compatible: -+ const: mediatek,mt7986-wm8960-sound -+ -+ platform: -+ type: object -+ additionalProperties: false -+ properties: -+ sound-dai: -+ description: The phandle of MT7986 platform. -+ maxItems: 1 -+ required: -+ - sound-dai -+ -+ codec: -+ type: object -+ additionalProperties: false -+ properties: -+ sound-dai: -+ description: The phandle of wm8960 codec. -+ maxItems: 1 -+ required: -+ - sound-dai -+ -+unevaluatedProperties: false -+ -+required: -+ - compatible -+ - audio-routing -+ - platform -+ - codec -+ -+examples: -+ - | -+ sound { -+ compatible = "mediatek,mt7986-wm8960-sound"; -+ model = "mt7986-wm8960"; -+ audio-routing = -+ "Headphone", "HP_L", -+ "Headphone", "HP_R", -+ "LINPUT1", "AMIC", -+ "RINPUT1", "AMIC"; -+ -+ platform { -+ sound-dai = <&afe>; -+ }; -+ -+ codec { -+ sound-dai = <&wm8960>; -+ }; -+ }; -+ -+... diff --git a/target/linux/mediatek/patches-6.1/860-v6.6-06-ASoC-dt-bindings-mediatek-mt7986-afe-add-audio-afe-d.patch b/target/linux/mediatek/patches-6.1/860-v6.6-06-ASoC-dt-bindings-mediatek-mt7986-afe-add-audio-afe-d.patch deleted file mode 100644 index 236d6a217c5..00000000000 --- a/target/linux/mediatek/patches-6.1/860-v6.6-06-ASoC-dt-bindings-mediatek-mt7986-afe-add-audio-afe-d.patch +++ /dev/null @@ -1,180 +0,0 @@ -From d16202eb38585adbc16e32d11188dbc2127015de Mon Sep 17 00:00:00 2001 -From: Maso Huang -Date: Thu, 17 Aug 2023 18:13:38 +0800 -Subject: [PATCH 6/9] ASoC: dt-bindings: mediatek,mt7986-afe: add audio afe - document - -Add mt7986 audio afe document. - -Signed-off-by: Maso Huang -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20230817101338.18782-7-maso.huang@mediatek.com -Signed-off-by: Mark Brown ---- - .../bindings/sound/mediatek,mt7986-afe.yaml | 160 ++++++++++++++++++ - 1 file changed, 160 insertions(+) - create mode 100644 Documentation/devicetree/bindings/sound/mediatek,mt7986-afe.yaml - ---- /dev/null -+++ b/Documentation/devicetree/bindings/sound/mediatek,mt7986-afe.yaml -@@ -0,0 +1,160 @@ -+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/sound/mediatek,mt7986-afe.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: MediaTek AFE PCM controller for MT7986 -+ -+maintainers: -+ - Maso Huang -+ -+properties: -+ compatible: -+ oneOf: -+ - const: mediatek,mt7986-afe -+ - items: -+ - enum: -+ - mediatek,mt7981-afe -+ - mediatek,mt7988-afe -+ - const: mediatek,mt7986-afe -+ -+ reg: -+ maxItems: 1 -+ -+ interrupts: -+ maxItems: 1 -+ -+ clocks: -+ minItems: 5 -+ items: -+ - description: audio bus clock -+ - description: audio 26M clock -+ - description: audio intbus clock -+ - description: audio hopping clock -+ - description: audio pll clock -+ - description: mux for pcm_mck -+ - description: audio i2s/pcm mck -+ -+ clock-names: -+ minItems: 5 -+ items: -+ - const: bus_ck -+ - const: 26m_ck -+ - const: l_ck -+ - const: aud_ck -+ - const: eg2_ck -+ - const: sel -+ - const: i2s_m -+ -+required: -+ - compatible -+ - reg -+ - interrupts -+ - clocks -+ - clock-names -+ -+allOf: -+ - if: -+ properties: -+ compatible: -+ contains: -+ const: mediatek,mt7986-afe -+ then: -+ properties: -+ clocks: -+ items: -+ - description: audio bus clock -+ - description: audio 26M clock -+ - description: audio intbus clock -+ - description: audio hopping clock -+ - description: audio pll clock -+ clock-names: -+ items: -+ - const: bus_ck -+ - const: 26m_ck -+ - const: l_ck -+ - const: aud_ck -+ - const: eg2_ck -+ -+ - if: -+ properties: -+ compatible: -+ contains: -+ const: mediatek,mt7981-afe -+ then: -+ properties: -+ clocks: -+ items: -+ - description: audio bus clock -+ - description: audio 26M clock -+ - description: audio intbus clock -+ - description: audio hopping clock -+ - description: audio pll clock -+ - description: mux for pcm_mck -+ clock-names: -+ items: -+ - const: bus_ck -+ - const: 26m_ck -+ - const: l_ck -+ - const: aud_ck -+ - const: eg2_ck -+ - const: sel -+ -+ - if: -+ properties: -+ compatible: -+ contains: -+ const: mediatek,mt7988-afe -+ then: -+ properties: -+ clocks: -+ items: -+ - description: audio bus clock -+ - description: audio 26M clock -+ - description: audio intbus clock -+ - description: audio hopping clock -+ - description: audio pll clock -+ - description: mux for pcm_mck -+ - description: audio i2s/pcm mck -+ clock-names: -+ items: -+ - const: bus_ck -+ - const: 26m_ck -+ - const: l_ck -+ - const: aud_ck -+ - const: eg2_ck -+ - const: sel -+ - const: i2s_m -+ -+additionalProperties: false -+ -+examples: -+ - | -+ #include -+ #include -+ #include -+ -+ afe@11210000 { -+ compatible = "mediatek,mt7986-afe"; -+ reg = <0x11210000 0x9000>; -+ interrupts = ; -+ clocks = <&infracfg_ao CLK_INFRA_AUD_BUS_CK>, -+ <&infracfg_ao CLK_INFRA_AUD_26M_CK>, -+ <&infracfg_ao CLK_INFRA_AUD_L_CK>, -+ <&infracfg_ao CLK_INFRA_AUD_AUD_CK>, -+ <&infracfg_ao CLK_INFRA_AUD_EG2_CK>; -+ clock-names = "bus_ck", -+ "26m_ck", -+ "l_ck", -+ "aud_ck", -+ "eg2_ck"; -+ assigned-clocks = <&topckgen CLK_TOP_A1SYS_SEL>, -+ <&topckgen CLK_TOP_AUD_L_SEL>, -+ <&topckgen CLK_TOP_A_TUNER_SEL>; -+ assigned-clock-parents = <&topckgen CLK_TOP_APLL2_D4>, -+ <&apmixedsys CLK_APMIXED_APLL2>, -+ <&topckgen CLK_TOP_APLL2_D4>; -+ }; -+ -+... diff --git a/target/linux/mediatek/patches-6.1/860-v6.7-07-ASoC-mediatek-mt7986-drop-the-remove-callback-of-mt7.patch b/target/linux/mediatek/patches-6.1/860-v6.7-07-ASoC-mediatek-mt7986-drop-the-remove-callback-of-mt7.patch deleted file mode 100644 index 413db8233f0..00000000000 --- a/target/linux/mediatek/patches-6.1/860-v6.7-07-ASoC-mediatek-mt7986-drop-the-remove-callback-of-mt7.patch +++ /dev/null @@ -1,42 +0,0 @@ -From f3f0934e5c7b9c16e0cb2435be3555382e6293ad Mon Sep 17 00:00:00 2001 -From: Maso Huang -Date: Tue, 24 Oct 2023 11:50:17 +0800 -Subject: [PATCH 7/9] ASoC: mediatek: mt7986: drop the remove callback of - mt7986_wm8960 - -Drop the remove callback of mt7986_wm8960. - -Signed-off-by: Maso Huang -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20231024035019.11732-2-maso.huang@mediatek.com -Signed-off-by: Mark Brown ---- - sound/soc/mediatek/mt7986/mt7986-wm8960.c | 10 ---------- - 1 file changed, 10 deletions(-) - ---- a/sound/soc/mediatek/mt7986/mt7986-wm8960.c -+++ b/sound/soc/mediatek/mt7986/mt7986-wm8960.c -@@ -163,15 +163,6 @@ err_of_node_put: - return ret; - } - --static void mt7986_wm8960_machine_remove(struct platform_device *pdev) --{ -- struct snd_soc_card *card = platform_get_drvdata(pdev); -- struct mt7986_wm8960_priv *priv = snd_soc_card_get_drvdata(card); -- -- of_node_put(priv->codec_node); -- of_node_put(priv->platform_node); --} -- - static const struct of_device_id mt7986_wm8960_machine_dt_match[] = { - {.compatible = "mediatek,mt7986-wm8960-sound"}, - { /* sentinel */ } -@@ -184,7 +175,6 @@ static struct platform_driver mt7986_wm8 - .of_match_table = mt7986_wm8960_machine_dt_match, - }, - .probe = mt7986_wm8960_machine_probe, -- .remove_new = mt7986_wm8960_machine_remove, - }; - - module_platform_driver(mt7986_wm8960_machine); diff --git a/target/linux/mediatek/patches-6.1/860-v6.7-08-ASoC-mediatek-mt7986-remove-the-mt7986_wm8960_priv-s.patch b/target/linux/mediatek/patches-6.1/860-v6.7-08-ASoC-mediatek-mt7986-remove-the-mt7986_wm8960_priv-s.patch deleted file mode 100644 index 5c596fc49c9..00000000000 --- a/target/linux/mediatek/patches-6.1/860-v6.7-08-ASoC-mediatek-mt7986-remove-the-mt7986_wm8960_priv-s.patch +++ /dev/null @@ -1,105 +0,0 @@ -From 98b8fb2cb4fcab1903d0baf611bf0c3f822a08dc Mon Sep 17 00:00:00 2001 -From: Maso Huang -Date: Tue, 24 Oct 2023 11:50:18 +0800 -Subject: [PATCH 8/9] ASoC: mediatek: mt7986: remove the mt7986_wm8960_priv - structure - -Remove the mt7986_wm8960_priv structure. - -Signed-off-by: Maso Huang -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20231024035019.11732-3-maso.huang@mediatek.com -Signed-off-by: Mark Brown ---- - sound/soc/mediatek/mt7986/mt7986-wm8960.c | 33 +++++++++-------------- - 1 file changed, 12 insertions(+), 21 deletions(-) - ---- a/sound/soc/mediatek/mt7986/mt7986-wm8960.c -+++ b/sound/soc/mediatek/mt7986/mt7986-wm8960.c -@@ -12,11 +12,6 @@ - - #include "mt7986-afe-common.h" - --struct mt7986_wm8960_priv { -- struct device_node *platform_node; -- struct device_node *codec_node; --}; -- - static const struct snd_soc_dapm_widget mt7986_wm8960_widgets[] = { - SND_SOC_DAPM_HP("Headphone", NULL), - SND_SOC_DAPM_MIC("AMIC", NULL), -@@ -92,20 +87,18 @@ static int mt7986_wm8960_machine_probe(s - struct snd_soc_card *card = &mt7986_wm8960_card; - struct snd_soc_dai_link *dai_link; - struct device_node *platform, *codec; -- struct mt7986_wm8960_priv *priv; -+ struct device_node *platform_dai_node, *codec_dai_node; - int ret, i; - -- priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); -- if (!priv) -- return -ENOMEM; -+ card->dev = &pdev->dev; - - platform = of_get_child_by_name(pdev->dev.of_node, "platform"); - - if (platform) { -- priv->platform_node = of_parse_phandle(platform, "sound-dai", 0); -+ platform_dai_node = of_parse_phandle(platform, "sound-dai", 0); - of_node_put(platform); - -- if (!priv->platform_node) { -+ if (!platform_dai_node) { - dev_err(&pdev->dev, "Failed to parse platform/sound-dai property\n"); - return -EINVAL; - } -@@ -117,24 +110,22 @@ static int mt7986_wm8960_machine_probe(s - for_each_card_prelinks(card, i, dai_link) { - if (dai_link->platforms->name) - continue; -- dai_link->platforms->of_node = priv->platform_node; -+ dai_link->platforms->of_node = platform_dai_node; - } - -- card->dev = &pdev->dev; -- - codec = of_get_child_by_name(pdev->dev.of_node, "codec"); - - if (codec) { -- priv->codec_node = of_parse_phandle(codec, "sound-dai", 0); -+ codec_dai_node = of_parse_phandle(codec, "sound-dai", 0); - of_node_put(codec); - -- if (!priv->codec_node) { -- of_node_put(priv->platform_node); -+ if (!codec_dai_node) { -+ of_node_put(platform_dai_node); - dev_err(&pdev->dev, "Failed to parse codec/sound-dai property\n"); - return -EINVAL; - } - } else { -- of_node_put(priv->platform_node); -+ of_node_put(platform_dai_node); - dev_err(&pdev->dev, "Property 'codec' missing or invalid\n"); - return -EINVAL; - } -@@ -142,7 +133,7 @@ static int mt7986_wm8960_machine_probe(s - for_each_card_prelinks(card, i, dai_link) { - if (dai_link->codecs->name) - continue; -- dai_link->codecs->of_node = priv->codec_node; -+ dai_link->codecs->of_node = codec_dai_node; - } - - ret = snd_soc_of_parse_audio_routing(card, "audio-routing"); -@@ -158,8 +149,8 @@ static int mt7986_wm8960_machine_probe(s - } - - err_of_node_put: -- of_node_put(priv->codec_node); -- of_node_put(priv->platform_node); -+ of_node_put(platform_dai_node); -+ of_node_put(codec_dai_node); - return ret; - } - diff --git a/target/linux/mediatek/patches-6.1/860-v6.7-09-ASoC-mediatek-mt7986-add-sample-rate-checker.patch b/target/linux/mediatek/patches-6.1/860-v6.7-09-ASoC-mediatek-mt7986-add-sample-rate-checker.patch deleted file mode 100644 index d4128deabcc..00000000000 --- a/target/linux/mediatek/patches-6.1/860-v6.7-09-ASoC-mediatek-mt7986-add-sample-rate-checker.patch +++ /dev/null @@ -1,49 +0,0 @@ -From 4e229f4264f4be7a6a554487714c0913ef59cf7f Mon Sep 17 00:00:00 2001 -From: Maso Huang -Date: Tue, 24 Oct 2023 11:50:19 +0800 -Subject: [PATCH 9/9] ASoC: mediatek: mt7986: add sample rate checker - -mt7986 only supports 8/12/16/24/32/48/96/192 kHz - -Signed-off-by: Maso Huang -Reviewed-by: AngeloGioacchino Del Regno -Link: https://lore.kernel.org/r/20231024035019.11732-4-maso.huang@mediatek.com -Signed-off-by: Mark Brown ---- - sound/soc/mediatek/mt7986/mt7986-dai-etdm.c | 23 +++++++++++++++++---- - 1 file changed, 19 insertions(+), 4 deletions(-) - ---- a/sound/soc/mediatek/mt7986/mt7986-dai-etdm.c -+++ b/sound/soc/mediatek/mt7986/mt7986-dai-etdm.c -@@ -237,12 +237,27 @@ static int mtk_dai_etdm_hw_params(struct - struct snd_pcm_hw_params *params, - struct snd_soc_dai *dai) - { -+ unsigned int rate = params_rate(params); - struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai); - -- mtk_dai_etdm_config(afe, params, dai, SNDRV_PCM_STREAM_PLAYBACK); -- mtk_dai_etdm_config(afe, params, dai, SNDRV_PCM_STREAM_CAPTURE); -- -- return 0; -+ switch (rate) { -+ case 8000: -+ case 12000: -+ case 16000: -+ case 24000: -+ case 32000: -+ case 48000: -+ case 96000: -+ case 192000: -+ mtk_dai_etdm_config(afe, params, dai, SNDRV_PCM_STREAM_PLAYBACK); -+ mtk_dai_etdm_config(afe, params, dai, SNDRV_PCM_STREAM_CAPTURE); -+ return 0; -+ default: -+ dev_err(afe->dev, -+ "Sample rate %d invalid. Supported rates: 8/12/16/24/32/48/96/192 kHz\n", -+ rate); -+ return -EINVAL; -+ } - } - - static int mtk_dai_etdm_trigger(struct snd_pcm_substream *substream, int cmd, diff --git a/target/linux/mediatek/patches-6.1/861-pending-10-ASoC-mediatek-mt7986-silence-error-in-case-of-EPROBE.patch b/target/linux/mediatek/patches-6.1/861-pending-10-ASoC-mediatek-mt7986-silence-error-in-case-of-EPROBE.patch deleted file mode 100644 index a40c249257c..00000000000 --- a/target/linux/mediatek/patches-6.1/861-pending-10-ASoC-mediatek-mt7986-silence-error-in-case-of-EPROBE.patch +++ /dev/null @@ -1,26 +0,0 @@ -From e4cde335d1771863a60b6931e51357b8470e85c4 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Sun, 10 Dec 2023 22:41:39 +0000 -Subject: [PATCH] ASoC: mediatek: mt7986: silence error in case of - -EPROBE_DEFER - -If probe is defered no error should be printed. Mute it. - -Signed-off-by: Daniel Golle ---- - sound/soc/mediatek/mt7986/mt7986-wm8960.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - ---- a/sound/soc/mediatek/mt7986/mt7986-wm8960.c -+++ b/sound/soc/mediatek/mt7986/mt7986-wm8960.c -@@ -144,7 +144,9 @@ static int mt7986_wm8960_machine_probe(s - - ret = devm_snd_soc_register_card(&pdev->dev, card); - if (ret) { -- dev_err(&pdev->dev, "%s snd_soc_register_card fail: %d\n", __func__, ret); -+ if (ret != -EPROBE_DEFER) -+ dev_err(&pdev->dev, "%s snd_soc_register_card fail: %d\n", __func__, ret); -+ - goto err_of_node_put; - } - diff --git a/target/linux/mediatek/patches-6.1/862-arm64-dts-mt7986-add-afe.patch b/target/linux/mediatek/patches-6.1/862-arm64-dts-mt7986-add-afe.patch deleted file mode 100644 index e40dca2a7de..00000000000 --- a/target/linux/mediatek/patches-6.1/862-arm64-dts-mt7986-add-afe.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 1c09b694a1e9378931085e77d834a4d9786a5356 Mon Sep 17 00:00:00 2001 -From: Maso Huang -Date: Thu, 7 Sep 2023 10:54:37 +0800 -Subject: [PATCH] arm64: dts: mt7986: add afe - ---- - arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 23 +++++++++++ - 1 files changed, 23 insertions(+) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -@@ -249,6 +249,28 @@ - status = "disabled"; - }; - -+ afe: audio-controller@11210000 { -+ compatible = "mediatek,mt7986-afe"; -+ reg = <0 0x11210000 0 0x9000>; -+ interrupts = ; -+ clocks = <&infracfg CLK_INFRA_AUD_BUS_CK>, -+ <&infracfg CLK_INFRA_AUD_26M_CK>, -+ <&infracfg CLK_INFRA_AUD_L_CK>, -+ <&infracfg CLK_INFRA_AUD_AUD_CK>, -+ <&infracfg CLK_INFRA_AUD_EG2_CK>; -+ clock-names = "aud_bus_ck", -+ "aud_26m_ck", -+ "aud_l_ck", -+ "aud_aud_ck", -+ "aud_eg2_ck"; -+ assigned-clocks = <&topckgen CLK_TOP_A1SYS_SEL>, -+ <&topckgen CLK_TOP_AUD_L_SEL>, -+ <&topckgen CLK_TOP_A_TUNER_SEL>; -+ assigned-clock-parents = <&topckgen CLK_TOP_APLL2_D4>, -+ <&apmixedsys CLK_APMIXED_APLL2>, -+ <&topckgen CLK_TOP_APLL2_D4>; -+ }; -+ - pwm: pwm@10048000 { - compatible = "mediatek,mt7986-pwm"; - reg = <0 0x10048000 0 0x1000>; diff --git a/target/linux/mediatek/patches-6.1/863-arm64-dts-mt7986-add-sound-wm8960.patch b/target/linux/mediatek/patches-6.1/863-arm64-dts-mt7986-add-sound-wm8960.patch deleted file mode 100644 index 15e30dec56c..00000000000 --- a/target/linux/mediatek/patches-6.1/863-arm64-dts-mt7986-add-sound-wm8960.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 1c09b694a1e9378931085e77d834a4d9786a5356 Mon Sep 17 00:00:00 2001 -From: Maso Huang -Date: Thu, 7 Sep 2023 10:54:37 +0800 -Subject: [PATCH] arm64: dts: mt7986: add sound wm8960 - ---- - .../dts/mediatek/mt7986a-rfb-spim-nand.dts | 39 +++++++++++++++++++ - 1 files changed, 39 insertions(+) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb-spim-nand.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb-spim-nand.dts -@@ -4,6 +4,35 @@ - - / { - compatible = "mediatek,mt7986a-rfb-snand"; -+ -+ sound_wm8960 { -+ compatible = "mediatek,mt7986-wm8960-sound"; -+ audio-routing = "Headphone", "HP_L", -+ "Headphone", "HP_R", -+ "LINPUT1", "AMIC", -+ "RINPUT1", "AMIC"; -+ -+ status = "okay"; -+ -+ platform { -+ sound-dai = <&afe>; -+ }; -+ -+ codec { -+ sound-dai = <&wm8960>; -+ }; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c_pins>; -+ status = "okay"; -+ -+ wm8960: wm8960@1a { -+ compatible = "wlf,wm8960"; -+ reg = <0x1a>; -+ }; - }; - - &spi0 { -@@ -50,3 +79,13 @@ - &wifi { - mediatek,mtd-eeprom = <&factory 0>; - }; -+ -+&pio { -+ i2c_pins: i2c-pins-3-4 { -+ mux { -+ function = "i2c"; -+ groups = "i2c"; -+ }; -+ }; -+}; -+ diff --git a/target/linux/mediatek/patches-6.1/864-arm64-dts-mt7986-add-sound-overlay-for-bpi-r3.patch b/target/linux/mediatek/patches-6.1/864-arm64-dts-mt7986-add-sound-overlay-for-bpi-r3.patch deleted file mode 100644 index bddcd4bb0c0..00000000000 --- a/target/linux/mediatek/patches-6.1/864-arm64-dts-mt7986-add-sound-overlay-for-bpi-r3.patch +++ /dev/null @@ -1,75 +0,0 @@ ---- /dev/null -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-respeaker-2mics.dtso -@@ -0,0 +1,62 @@ -+// SPDX-License-Identifier: (GPL-2.0 OR MIT) -+/* -+ * Copyright (C) 2023 MediaTek Inc. -+ * Author: Maso Huang -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "bananapi,bpi-r3", "mediatek,mt7986a"; -+ -+ fragment@0 { -+ target-path = "/"; -+ __overlay__ { -+ sound_wm8960 { -+ compatible = "mediatek,mt7986-wm8960-sound"; -+ audio-routing = "Headphone", "HP_L", -+ "Headphone", "HP_R", -+ "LINPUT1", "AMIC", -+ "RINPUT1", "AMIC"; -+ -+ status = "okay"; -+ -+ platform { -+ sound-dai = <&afe>; -+ }; -+ -+ codec { -+ sound-dai = <&wm8960>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2c0>; -+ __overlay__ { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c_pins>; -+ clock-frequency = <400000>; -+ status = "okay"; -+ -+ wm8960: wm8960@1a { -+ compatible = "wlf,wm8960"; -+ reg = <0x1a>; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&pio>; -+ __overlay__ { -+ i2c_pins: i2c-pins-3-4 { -+ mux { -+ function = "i2c"; -+ groups = "i2c"; -+ }; -+ }; -+ }; -+ }; -+}; ---- a/arch/arm64/boot/dts/mediatek/Makefile -+++ b/arch/arm64/boot/dts/mediatek/Makefile -@@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-b - dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo - dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo - dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo -+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-respeaker-2mics.dtbo - dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb - dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb - dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb diff --git a/target/linux/mediatek/patches-6.1/900-dts-mt7622-bpi-r64-aliases-for-dtoverlay.patch b/target/linux/mediatek/patches-6.1/900-dts-mt7622-bpi-r64-aliases-for-dtoverlay.patch deleted file mode 100644 index 87a937be054..00000000000 --- a/target/linux/mediatek/patches-6.1/900-dts-mt7622-bpi-r64-aliases-for-dtoverlay.patch +++ /dev/null @@ -1,65 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -@@ -313,7 +313,7 @@ - /* Attention: GPIO 90 is used to switch between PCIe@1,0 and - * SATA functions. i.e. output-high: PCIe, output-low: SATA - */ -- asm_sel { -+ asmsel: asm_sel { - gpio-hog; - gpios = <90 GPIO_ACTIVE_HIGH>; - output-high; ---- /dev/null -+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64-sata.dtso -@@ -0,0 +1,31 @@ -+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */ -+ -+#include -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "bananapi,bpi-r64", "mediatek,mt7622"; -+ -+ fragment@0 { -+ target = <&asmsel>; -+ __overlay__ { -+ gpios = <90 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&sata>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&sata_phy>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64-pcie1.dtso -@@ -0,0 +1,17 @@ -+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */ -+ -+#include -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "bananapi,bpi-r64", "mediatek,mt7622"; -+ -+ fragment@0 { -+ target = <&asmsel>; -+ __overlay__ { -+ gpios = <90 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+}; diff --git a/target/linux/mediatek/patches-6.1/901-arm-add-cmdline-override.patch b/target/linux/mediatek/patches-6.1/901-arm-add-cmdline-override.patch deleted file mode 100644 index bfca4b63894..00000000000 --- a/target/linux/mediatek/patches-6.1/901-arm-add-cmdline-override.patch +++ /dev/null @@ -1,54 +0,0 @@ ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -1589,6 +1589,14 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN - - endchoice - -+config CMDLINE_OVERRIDE -+ bool "Use alternative cmdline from device tree" -+ help -+ Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can -+ be used, this is not a good option for kernels that are shared across -+ devices. This setting enables using "chosen/cmdline-override" as the -+ cmdline if it exists in the device tree. -+ - config CMDLINE - string "Default kernel command string" - default "" ---- a/drivers/of/fdt.c -+++ b/drivers/of/fdt.c -@@ -1187,6 +1187,17 @@ int __init early_init_dt_scan_chosen(cha - if (p != NULL && l > 0) - strlcat(cmdline, p, min_t(int, strlen(cmdline) + (int)l, COMMAND_LINE_SIZE)); - -+ /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different -+ * device tree option of chosen/bootargs-override. This is -+ * helpful on boards where u-boot sets bootargs, and is unable -+ * to be modified. -+ */ -+#ifdef CONFIG_CMDLINE_OVERRIDE -+ p = of_get_flat_dt_prop(node, "bootargs-override", &l); -+ if (p != NULL && l > 0) -+ strlcpy(cmdline, p, min((int)l, COMMAND_LINE_SIZE)); -+#endif -+ - handle_cmdline: - /* - * CONFIG_CMDLINE is meant to be a default in case nothing else ---- a/arch/arm64/Kconfig -+++ b/arch/arm64/Kconfig -@@ -2240,6 +2240,14 @@ config CMDLINE_FORCE - - endchoice - -+config CMDLINE_OVERRIDE -+ bool "Use alternative cmdline from device tree" -+ help -+ Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can -+ be used, this is not a good option for kernels that are shared across -+ devices. This setting enables using "chosen/cmdline-override" as the -+ cmdline if it exists in the device tree. -+ - config EFI_STUB - bool - diff --git a/target/linux/mediatek/patches-6.1/910-dts-mt7622-bpi-r64-wifi-eeprom.patch b/target/linux/mediatek/patches-6.1/910-dts-mt7622-bpi-r64-wifi-eeprom.patch deleted file mode 100644 index d1f6a96720b..00000000000 --- a/target/linux/mediatek/patches-6.1/910-dts-mt7622-bpi-r64-wifi-eeprom.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -@@ -640,5 +640,28 @@ - }; - - &wmac { -+ mediatek,eeprom-data = <0x22760500 0x0 0x0 0x0 -+ 0x0 0x0 0x0 0x0 -+ 0x0 0x0 0x0 0x0 -+ 0x0 0x44000020 0x0 0x10002000 -+ 0x4400 0x4000000 0x0 0x0 -+ 0x200000b3 0x40b6c3c3 0x26000000 0x41c42600 -+ 0x41c4 0x26000000 0xc0c52600 0x0 -+ 0x0 0x0 0x0 0x0 -+ 0x0 0x0 0x0 0x0 -+ 0x0 0x0 0x0 0x0 -+ 0x0 0x0 0x0 0x0 -+ 0x0 0x0 0x0 0xc6c6 -+ 0xc3c3c2c1 0xc300c3 0x818181 0x83c1c182 -+ 0x83838382 0x0 0x0 0x0 -+ 0x0 0x0 0x0 0x0 -+ 0x84002e00 0x90000087 0x8a000000 0x0 -+ 0x0 0x0 0x0 0x0 -+ 0x0 0x0 0x0 0x0 -+ 0xb000009 0x0 0x0 0x0 -+ 0x0 0x0 0x0 0x0 -+ 0x0 0x0 0x0 0x0 -+ 0x0 0x0 0x0 0x7707>; -+ - status = "okay"; - }; diff --git a/target/linux/mediatek/patches-6.1/911-dts-mt7622-bpi-r64-add-rootdisk.patch b/target/linux/mediatek/patches-6.1/911-dts-mt7622-bpi-r64-add-rootdisk.patch deleted file mode 100644 index 014342aad5b..00000000000 --- a/target/linux/mediatek/patches-6.1/911-dts-mt7622-bpi-r64-add-rootdisk.patch +++ /dev/null @@ -1,103 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -@@ -32,6 +32,9 @@ - chosen { - stdout-path = "serial0:115200n8"; - bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512"; -+ rootdisk-emmc = <&emmc_rootfs>; -+ rootdisk-sd = <&sd_rootfs>; -+ rootdisk-snfi = <&ubi_rootfs>; - }; - - cpus { -@@ -234,6 +237,26 @@ - assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; - non-removable; -+ -+ card@0 { -+ compatible = "mmc-card"; -+ reg = <0>; -+ -+ block { -+ compatible = "block-device"; -+ partitions { -+ block-partition-env { -+ partname = "ubootenv"; -+ nvmem-layout { -+ compatible = "u-boot,env-layout"; -+ }; -+ }; -+ emmc_rootfs: block-partition-production { -+ partname = "production"; -+ }; -+ }; -+ }; -+ }; - }; - - &mmc1 { -@@ -250,6 +273,26 @@ - vqmmc-supply = <®_3p3v>; - assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; -+ -+ card@0 { -+ compatible = "mmc-card"; -+ reg = <0>; -+ -+ block { -+ compatible = "block-device"; -+ partitions { -+ block-partition-env { -+ partname = "ubootenv"; -+ nvmem-layout { -+ compatible = "u-boot,env-layout"; -+ }; -+ }; -+ sd_rootfs: block-partition-production { -+ partname = "production"; -+ }; -+ }; -+ }; -+ }; - }; - - &nandc { -@@ -284,14 +327,29 @@ - }; - - partition@80000 { -- label = "fip"; -- reg = <0x80000 0x200000>; -- read-only; -- }; -- -- ubi: partition@280000 { - label = "ubi"; -- reg = <0x280000 0x7d80000>; -+ reg = <0x80000 0x7f80000>; -+ compatible = "linux,ubi"; -+ -+ volumes { -+ ubi-volume-ubootenv { -+ volname = "ubootenv"; -+ nvmem-layout { -+ compatible = "u-boot,env-redundant-bool-layout"; -+ }; -+ }; -+ -+ ubi-volume-ubootenv2 { -+ volname = "ubootenv2"; -+ nvmem-layout { -+ compatible = "u-boot,env-redundant-bool-layout"; -+ }; -+ }; -+ -+ ubi_rootfs: ubi-volume-fit { -+ volname = "fit"; -+ }; -+ }; - }; - }; - }; diff --git a/target/linux/mediatek/patches-6.1/930-spi-mt65xx-enable-sel-clk.patch b/target/linux/mediatek/patches-6.1/930-spi-mt65xx-enable-sel-clk.patch deleted file mode 100644 index 3d05bf7679b..00000000000 --- a/target/linux/mediatek/patches-6.1/930-spi-mt65xx-enable-sel-clk.patch +++ /dev/null @@ -1,18 +0,0 @@ ---- a/drivers/spi/spi-mt65xx.c -+++ b/drivers/spi/spi-mt65xx.c -@@ -1227,8 +1227,15 @@ static int mtk_spi_probe(struct platform - if (ret < 0) - return dev_err_probe(dev, ret, "failed to enable hclk\n"); - -+ ret = clk_prepare_enable(mdata->sel_clk); -+ if (ret < 0) { -+ clk_disable_unprepare(mdata->spi_hclk); -+ return dev_err_probe(dev, ret, "failed to enable sel_clk\n"); -+ } -+ - ret = clk_prepare_enable(mdata->spi_clk); - if (ret < 0) { -+ clk_disable_unprepare(mdata->sel_clk); - clk_disable_unprepare(mdata->spi_hclk); - return dev_err_probe(dev, ret, "failed to enable spi_clk\n"); - } diff --git a/target/linux/mediatek/patches-6.1/940-net-ethernet-mtk_wed-rename-mtk_wed_get_memory_regio.patch b/target/linux/mediatek/patches-6.1/940-net-ethernet-mtk_wed-rename-mtk_wed_get_memory_regio.patch deleted file mode 100644 index 30be53518ac..00000000000 --- a/target/linux/mediatek/patches-6.1/940-net-ethernet-mtk_wed-rename-mtk_wed_get_memory_regio.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 3cf212c4ce6cd72c09bc47f35f539ba0afd4d106 Mon Sep 17 00:00:00 2001 -Message-Id: <3cf212c4ce6cd72c09bc47f35f539ba0afd4d106.1678716918.git.lorenzo@kernel.org> -From: Lorenzo Bianconi -Date: Sun, 12 Mar 2023 16:40:31 +0100 -Subject: [PATCH net-next 1/2] net: ethernet: mtk_wed: rename - mtk_wed_get_memory_region in mtk_wed_get_reserved_memory_region - -This is a preliminary patch to move wed ilm/dlm and cpuboot properties in -dedicated dts nodes. - -Signed-off-by: Lorenzo Bianconi ---- - drivers/net/ethernet/mediatek/mtk_wed_mcu.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - ---- a/drivers/net/ethernet/mediatek/mtk_wed_mcu.c -+++ b/drivers/net/ethernet/mediatek/mtk_wed_mcu.c -@@ -234,8 +234,8 @@ int mtk_wed_mcu_msg_update(struct mtk_we - } - - static int --mtk_wed_get_memory_region(struct mtk_wed_hw *hw, int index, -- struct mtk_wed_wo_memory_region *region) -+mtk_wed_get_reserved_memory_region(struct mtk_wed_hw *hw, int index, -+ struct mtk_wed_wo_memory_region *region) - { - struct reserved_mem *rmem; - struct device_node *np; -@@ -321,7 +321,7 @@ mtk_wed_mcu_load_firmware(struct mtk_wed - if (index < 0) - continue; - -- ret = mtk_wed_get_memory_region(wo->hw, index, &mem_region[i]); -+ ret = mtk_wed_get_reserved_memory_region(wo->hw, index, &mem_region[i]); - if (ret) - return ret; - } diff --git a/target/linux/mediatek/patches-6.1/941-arm64-dts-mt7986-move-cpuboot-in-a-dedicated-node.patch b/target/linux/mediatek/patches-6.1/941-arm64-dts-mt7986-move-cpuboot-in-a-dedicated-node.patch deleted file mode 100644 index da61f1c0502..00000000000 --- a/target/linux/mediatek/patches-6.1/941-arm64-dts-mt7986-move-cpuboot-in-a-dedicated-node.patch +++ /dev/null @@ -1,66 +0,0 @@ -From 247e566e3459481f1fa98733534bfed767e18b42 Mon Sep 17 00:00:00 2001 -Message-Id: <247e566e3459481f1fa98733534bfed767e18b42.1678620342.git.lorenzo@kernel.org> -From: Lorenzo Bianconi -Date: Sat, 11 Mar 2023 16:32:41 +0100 -Subject: [PATCH net-next] arm64: dts: mt7986: move cpuboot in a dedicated node - -Signed-off-by: Lorenzo Bianconi ---- - arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 21 +++++++++++---------- - 1 file changed, 11 insertions(+), 10 deletions(-) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -@@ -121,12 +121,6 @@ - reg = <0 0x151f8000 0 0x2000>; - no-map; - }; -- -- wo_boot: wo-boot@15194000 { -- reg = <0 0x15194000 0 0x1000>; -- no-map; -- }; -- - }; - - timer { -@@ -541,10 +535,11 @@ - interrupt-parent = <&gic>; - interrupts = ; - memory-region = <&wo_emi0>, <&wo_ilm0>, <&wo_dlm0>, -- <&wo_data>, <&wo_boot>; -+ <&wo_data>; - memory-region-names = "wo-emi", "wo-ilm", "wo-dlm", -- "wo-data", "wo-boot"; -+ "wo-data"; - mediatek,wo-ccif = <&wo_ccif0>; -+ mediatek,wo-cpuboot = <&wo_cpuboot>; - }; - - wed1: wed@15011000 { -@@ -554,10 +549,11 @@ - interrupt-parent = <&gic>; - interrupts = ; - memory-region = <&wo_emi1>, <&wo_ilm1>, <&wo_dlm1>, -- <&wo_data>, <&wo_boot>; -+ <&wo_data>; - memory-region-names = "wo-emi", "wo-ilm", "wo-dlm", -- "wo-data", "wo-boot"; -+ "wo-data"; - mediatek,wo-ccif = <&wo_ccif1>; -+ mediatek,wo-cpuboot = <&wo_cpuboot>; - }; - - wo_ccif0: syscon@151a5000 { -@@ -574,6 +570,11 @@ - interrupts = ; - }; - -+ wo_cpuboot: syscon@15194000 { -+ compatible = "mediatek,mt7986-wo-cpuboot", "syscon"; -+ reg = <0 0x15194000 0 0x1000>; -+ }; -+ - eth: ethernet@15100000 { - compatible = "mediatek,mt7986-eth"; - reg = <0 0x15100000 0 0x80000>; diff --git a/target/linux/mediatek/patches-6.1/942-net-ethernet-mtk_wed-move-cpuboot-in-a-dedicated-dts.patch b/target/linux/mediatek/patches-6.1/942-net-ethernet-mtk_wed-move-cpuboot-in-a-dedicated-dts.patch deleted file mode 100644 index b4bea2087b3..00000000000 --- a/target/linux/mediatek/patches-6.1/942-net-ethernet-mtk_wed-move-cpuboot-in-a-dedicated-dts.patch +++ /dev/null @@ -1,81 +0,0 @@ -From f292d1bf83ec160bef2532b58aa08f5b71041923 Mon Sep 17 00:00:00 2001 -Message-Id: -In-Reply-To: <3cf212c4ce6cd72c09bc47f35f539ba0afd4d106.1678716918.git.lorenzo@kernel.org> -References: <3cf212c4ce6cd72c09bc47f35f539ba0afd4d106.1678716918.git.lorenzo@kernel.org> -From: Lorenzo Bianconi -Date: Sat, 11 Mar 2023 18:13:04 +0100 -Subject: [PATCH net-next 2/2] net: ethernet: mtk_wed: move cpuboot in a - dedicated dts node - -Since the cpuboot memory region is not part of the RAM SoC, move cpuboot -in a deidicated syscon node. -This patch helps to keep backward-compatibility with older version of -uboot codebase where we have a limit of 8 reserved-memory dts child -nodes. -Keep backward-compatibility with older dts version where cpuboot was -defined as reserved-memory child node. - -Signed-off-by: Lorenzo Bianconi ---- - drivers/net/ethernet/mediatek/mtk_wed_mcu.c | 34 +++++++++++++++++---- - drivers/net/ethernet/mediatek/mtk_wed_wo.h | 3 +- - 2 files changed, 30 insertions(+), 7 deletions(-) - ---- a/drivers/net/ethernet/mediatek/mtk_wed_mcu.c -+++ b/drivers/net/ethernet/mediatek/mtk_wed_mcu.c -@@ -34,12 +34,23 @@ static struct mtk_wed_wo_memory_region m - - static u32 wo_r32(struct mtk_wed_wo *wo, u32 reg) - { -- return readl(mem_region[MTK_WED_WO_REGION_BOOT].addr + reg); -+ u32 val; -+ -+ if (!wo->boot_regmap) -+ return readl(mem_region[MTK_WED_WO_REGION_BOOT].addr + reg); -+ -+ if (regmap_read(wo->boot_regmap, reg, &val)) -+ val = ~0; -+ -+ return val; - } - - static void wo_w32(struct mtk_wed_wo *wo, u32 reg, u32 val) - { -- writel(val, mem_region[MTK_WED_WO_REGION_BOOT].addr + reg); -+ if (wo->boot_regmap) -+ regmap_write(wo->boot_regmap, reg, val); -+ else -+ writel(val, mem_region[MTK_WED_WO_REGION_BOOT].addr + reg); - } - - static struct sk_buff * -@@ -313,6 +324,9 @@ mtk_wed_mcu_load_firmware(struct mtk_wed - u32 val, boot_cr; - int ret, i; - -+ wo->boot_regmap = syscon_regmap_lookup_by_phandle(wo->hw->node, -+ "mediatek,wo-cpuboot"); -+ - /* load firmware region metadata */ - for (i = 0; i < ARRAY_SIZE(mem_region); i++) { - int index = of_property_match_string(wo->hw->node, -@@ -321,6 +335,9 @@ mtk_wed_mcu_load_firmware(struct mtk_wed - if (index < 0) - continue; - -+ if (index == MTK_WED_WO_REGION_BOOT && !IS_ERR(wo->boot_regmap)) -+ continue; -+ - ret = mtk_wed_get_reserved_memory_region(wo->hw, index, &mem_region[i]); - if (ret) - return ret; ---- a/drivers/net/ethernet/mediatek/mtk_wed_wo.h -+++ b/drivers/net/ethernet/mediatek/mtk_wed_wo.h -@@ -231,6 +231,7 @@ struct mtk_wed_wo_queue { - struct mtk_wed_wo { - struct mtk_wed_hw *hw; - -+ struct regmap *boot_regmap; - struct mtk_wed_wo_queue q_tx; - struct mtk_wed_wo_queue q_rx; - diff --git a/target/linux/mediatek/patches-6.1/943-net-ethernet-mtk_wed-move-ilm-a-dedicated-dts-node.patch b/target/linux/mediatek/patches-6.1/943-net-ethernet-mtk_wed-move-ilm-a-dedicated-dts-node.patch deleted file mode 100644 index b4ba5b0d2df..00000000000 --- a/target/linux/mediatek/patches-6.1/943-net-ethernet-mtk_wed-move-ilm-a-dedicated-dts-node.patch +++ /dev/null @@ -1,86 +0,0 @@ -From f3565e6c2276411275e707a5442d3f69cc111273 Mon Sep 17 00:00:00 2001 -Message-Id: -From: Lorenzo Bianconi -Date: Sun, 12 Mar 2023 18:51:47 +0100 -Subject: [PATCH net-next 1/3] net: ethernet: mtk_wed: move ilm a dedicated dts - node - -Since the ilm memory region is not part of the RAM SoC, move ilm in a -deidicated syscon node. -This patch helps to keep backward-compatibility with older version of -uboot codebase where we have a limit of 8 reserved-memory dts child -nodes. -Keep backward-compatibility with older dts version where ilm was defined -as reserved-memory child node. - -Signed-off-by: Lorenzo Bianconi ---- - drivers/net/ethernet/mediatek/mtk_wed_mcu.c | 55 ++++++++++++++++++--- - 1 file changed, 49 insertions(+), 6 deletions(-) - ---- a/drivers/net/ethernet/mediatek/mtk_wed_mcu.c -+++ b/drivers/net/ethernet/mediatek/mtk_wed_mcu.c -@@ -316,6 +316,39 @@ next: - } - - static int -+mtk_wed_mcu_load_ilm(struct mtk_wed_wo *wo) -+{ -+ struct mtk_wed_wo_memory_region *ilm_region; -+ struct resource res; -+ struct device_node *np; -+ int ret; -+ -+ np = of_parse_phandle(wo->hw->node, "mediatek,wo-ilm", 0); -+ if (!np) -+ return 0; -+ -+ ret = of_address_to_resource(np, 0, &res); -+ of_node_put(np); -+ -+ if (ret < 0) -+ return ret; -+ -+ ilm_region = &mem_region[MTK_WED_WO_REGION_ILM]; -+ ilm_region->phy_addr = res.start; -+ ilm_region->size = resource_size(&res); -+ ilm_region->addr = devm_ioremap(wo->hw->dev, res.start, -+ resource_size(&res)); -+ -+ if (!IS_ERR(ilm_region->addr)) -+ return 0; -+ -+ ret = PTR_ERR(ilm_region->addr); -+ ilm_region->addr = NULL; -+ -+ return ret; -+} -+ -+static int - mtk_wed_mcu_load_firmware(struct mtk_wed_wo *wo) - { - const struct mtk_wed_fw_trailer *trailer; -@@ -324,14 +357,20 @@ mtk_wed_mcu_load_firmware(struct mtk_wed - u32 val, boot_cr; - int ret, i; - -+ mtk_wed_mcu_load_ilm(wo); - wo->boot_regmap = syscon_regmap_lookup_by_phandle(wo->hw->node, - "mediatek,wo-cpuboot"); - - /* load firmware region metadata */ - for (i = 0; i < ARRAY_SIZE(mem_region); i++) { -- int index = of_property_match_string(wo->hw->node, -- "memory-region-names", -- mem_region[i].name); -+ int index; -+ -+ if (mem_region[i].addr) -+ continue; -+ -+ index = of_property_match_string(wo->hw->node, -+ "memory-region-names", -+ mem_region[i].name); - if (index < 0) - continue; - diff --git a/target/linux/mediatek/patches-6.1/944-net-ethernet-mtk_wed-move-dlm-a-dedicated-dts-node.patch b/target/linux/mediatek/patches-6.1/944-net-ethernet-mtk_wed-move-dlm-a-dedicated-dts-node.patch deleted file mode 100644 index c92fcd43cee..00000000000 --- a/target/linux/mediatek/patches-6.1/944-net-ethernet-mtk_wed-move-dlm-a-dedicated-dts-node.patch +++ /dev/null @@ -1,57 +0,0 @@ -From b74ba226be2c45091b93bd49192bdd6d2178729e Mon Sep 17 00:00:00 2001 -Message-Id: -In-Reply-To: -References: -From: Lorenzo Bianconi -Date: Mon, 13 Mar 2023 15:45:16 +0100 -Subject: [PATCH net-next 3/3] net: ethernet: mtk_wed: move dlm a dedicated dts - node - -Since the dlm memory region is not part of the RAM SoC, move dlm in a -deidicated syscon node. -This patch helps to keep backward-compatibility with older version of -uboot codebase where we have a limit of 8 reserved-memory dts child -nodes. -Keep backward-compatibility with older dts version where dlm was defined -as reserved-memory child node. - -Signed-off-by: Lorenzo Bianconi ---- - drivers/net/ethernet/mediatek/mtk_wed.c | 19 +++++++++++++++++++ - 1 file changed, 19 insertions(+) - ---- a/drivers/net/ethernet/mediatek/mtk_wed.c -+++ b/drivers/net/ethernet/mediatek/mtk_wed.c -@@ -1320,6 +1320,24 @@ mtk_wed_rro_alloc(struct mtk_wed_device - struct device_node *np; - int index; - -+ np = of_parse_phandle(dev->hw->node, "mediatek,wo-dlm", 0); -+ if (np) { -+ struct resource res; -+ int ret; -+ -+ ret = of_address_to_resource(np, 0, &res); -+ of_node_put(np); -+ -+ if (ret < 0) -+ return ret; -+ -+ dev->rro.miod_phys = res.start; -+ goto out; -+ } -+ -+ /* For backward compatibility, we need to check if DLM -+ * node is defined through reserved memory property. -+ */ - index = of_property_match_string(dev->hw->node, "memory-region-names", - "wo-dlm"); - if (index < 0) -@@ -1336,6 +1354,7 @@ mtk_wed_rro_alloc(struct mtk_wed_device - return -ENODEV; - - dev->rro.miod_phys = rmem->base; -+out: - dev->rro.fdbk_phys = MTK_WED_MIOD_COUNT + dev->rro.miod_phys; - - return mtk_wed_rro_ring_alloc(dev, &dev->rro.ring, diff --git a/target/linux/mediatek/patches-6.1/945-arm64-dts-mt7986-move-ilm-in-a-dedicated-node.patch b/target/linux/mediatek/patches-6.1/945-arm64-dts-mt7986-move-ilm-in-a-dedicated-node.patch deleted file mode 100644 index 2f1becd1b89..00000000000 --- a/target/linux/mediatek/patches-6.1/945-arm64-dts-mt7986-move-ilm-in-a-dedicated-node.patch +++ /dev/null @@ -1,83 +0,0 @@ -From 01561065af5bf1d2a4244896d897e3a1eafbcd46 Mon Sep 17 00:00:00 2001 -Message-Id: <01561065af5bf1d2a4244896d897e3a1eafbcd46.1678717704.git.lorenzo@kernel.org> -From: Lorenzo Bianconi -Date: Mon, 13 Mar 2023 15:10:56 +0100 -Subject: [PATCH net-next] arm64: dts: mt7986: move ilm in a dedicated node - -Since the ilm memory region is not part of the RAM SoC, move ilm in a -deidicated syscon node. -This patch helps to keep backward-compatibility with older version of -uboot codebase where we have a limit of 8 reserved-memory dts child -nodes. - -Signed-off-by: Lorenzo Bianconi ---- - arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 34 +++++++++++------------ - 1 file changed, 16 insertions(+), 18 deletions(-) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -@@ -97,16 +97,6 @@ - no-map; - }; - -- wo_ilm0: wo-ilm@151e0000 { -- reg = <0 0x151e0000 0 0x8000>; -- no-map; -- }; -- -- wo_ilm1: wo-ilm@151f0000 { -- reg = <0 0x151f0000 0 0x8000>; -- no-map; -- }; -- - wo_data: wo-data@4fd80000 { - reg = <0 0x4fd80000 0 0x240000>; - no-map; -@@ -534,11 +524,10 @@ - reg = <0 0x15010000 0 0x1000>; - interrupt-parent = <&gic>; - interrupts = ; -- memory-region = <&wo_emi0>, <&wo_ilm0>, <&wo_dlm0>, -- <&wo_data>; -- memory-region-names = "wo-emi", "wo-ilm", "wo-dlm", -- "wo-data"; -+ memory-region = <&wo_emi0>, <&wo_dlm0>, <&wo_data>; -+ memory-region-names = "wo-emi", "wo-dlm", "wo-data"; - mediatek,wo-ccif = <&wo_ccif0>; -+ mediatek,wo-ilm = <&wo_ilm0>; - mediatek,wo-cpuboot = <&wo_cpuboot>; - }; - -@@ -548,11 +537,10 @@ - reg = <0 0x15011000 0 0x1000>; - interrupt-parent = <&gic>; - interrupts = ; -- memory-region = <&wo_emi1>, <&wo_ilm1>, <&wo_dlm1>, -- <&wo_data>; -- memory-region-names = "wo-emi", "wo-ilm", "wo-dlm", -- "wo-data"; -+ memory-region = <&wo_emi1>, <&wo_dlm1>, <&wo_data>; -+ memory-region-names = "wo-emi", "wo-dlm", "wo-data"; - mediatek,wo-ccif = <&wo_ccif1>; -+ mediatek,wo-ilm = <&wo_ilm1>; - mediatek,wo-cpuboot = <&wo_cpuboot>; - }; - -@@ -570,6 +558,16 @@ - interrupts = ; - }; - -+ wo_ilm0: syscon@151e0000 { -+ compatible = "mediatek,mt7986-wo-ilm", "syscon"; -+ reg = <0 0x151e0000 0 0x8000>; -+ }; -+ -+ wo_ilm1: syscon@151f0000 { -+ compatible = "mediatek,mt7986-wo-ilm", "syscon"; -+ reg = <0 0x151f0000 0 0x8000>; -+ }; -+ - wo_cpuboot: syscon@15194000 { - compatible = "mediatek,mt7986-wo-cpuboot", "syscon"; - reg = <0 0x15194000 0 0x1000>; diff --git a/target/linux/mediatek/patches-6.1/946-arm64-dts-mt7986-move-dlm-in-a-dedicated-node.patch b/target/linux/mediatek/patches-6.1/946-arm64-dts-mt7986-move-dlm-in-a-dedicated-node.patch deleted file mode 100644 index 5b52a4934e2..00000000000 --- a/target/linux/mediatek/patches-6.1/946-arm64-dts-mt7986-move-dlm-in-a-dedicated-node.patch +++ /dev/null @@ -1,81 +0,0 @@ -From 9f76be683a8ec498563c294bc1cc279468058302 Mon Sep 17 00:00:00 2001 -Message-Id: <9f76be683a8ec498563c294bc1cc279468058302.1678719283.git.lorenzo@kernel.org> -From: Lorenzo Bianconi -Date: Mon, 13 Mar 2023 15:53:30 +0100 -Subject: [PATCH net-next] arm64: dts: mt7986: move dlm in a dedicated node - -Since the dlm memory region is not part of the RAM SoC, move dlm in a -deidicated syscon node. -This patch helps to keep backward-compatibility with older version of -uboot codebase where we have a limit of 8 reserved-memory dts child -nodes. - -Signed-off-by: Lorenzo Bianconi ---- - arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 30 ++++++++++++----------- - 1 file changed, 16 insertions(+), 14 deletions(-) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -@@ -101,16 +101,6 @@ - reg = <0 0x4fd80000 0 0x240000>; - no-map; - }; -- -- wo_dlm0: wo-dlm@151e8000 { -- reg = <0 0x151e8000 0 0x2000>; -- no-map; -- }; -- -- wo_dlm1: wo-dlm@151f8000 { -- reg = <0 0x151f8000 0 0x2000>; -- no-map; -- }; - }; - - timer { -@@ -524,10 +514,11 @@ - reg = <0 0x15010000 0 0x1000>; - interrupt-parent = <&gic>; - interrupts = ; -- memory-region = <&wo_emi0>, <&wo_dlm0>, <&wo_data>; -- memory-region-names = "wo-emi", "wo-dlm", "wo-data"; -+ memory-region = <&wo_emi0>, <&wo_data>; -+ memory-region-names = "wo-emi", "wo-data"; - mediatek,wo-ccif = <&wo_ccif0>; - mediatek,wo-ilm = <&wo_ilm0>; -+ mediatek,wo-dlm = <&wo_dlm0>; - mediatek,wo-cpuboot = <&wo_cpuboot>; - }; - -@@ -537,10 +528,11 @@ - reg = <0 0x15011000 0 0x1000>; - interrupt-parent = <&gic>; - interrupts = ; -- memory-region = <&wo_emi1>, <&wo_dlm1>, <&wo_data>; -- memory-region-names = "wo-emi", "wo-dlm", "wo-data"; -+ memory-region = <&wo_emi1>, <&wo_data>; -+ memory-region-names = "wo-emi", "wo-data"; - mediatek,wo-ccif = <&wo_ccif1>; - mediatek,wo-ilm = <&wo_ilm1>; -+ mediatek,wo-dlm = <&wo_dlm1>; - mediatek,wo-cpuboot = <&wo_cpuboot>; - }; - -@@ -568,6 +560,16 @@ - reg = <0 0x151f0000 0 0x8000>; - }; - -+ wo_dlm0: syscon@151e8000 { -+ compatible = "mediatek,mt7986-wo-dlm", "syscon"; -+ reg = <0 0x151e8000 0 0x2000>; -+ }; -+ -+ wo_dlm1: syscon@151f8000 { -+ compatible = "mediatek,mt7986-wo-dlm", "syscon"; -+ reg = <0 0x151f8000 0 0x2000>; -+ }; -+ - wo_cpuboot: syscon@15194000 { - compatible = "mediatek,mt7986-wo-cpuboot", "syscon"; - reg = <0 0x15194000 0 0x1000>; diff --git a/target/linux/mediatek/patches-6.1/950-smartrg-i2c-led-driver.patch b/target/linux/mediatek/patches-6.1/950-smartrg-i2c-led-driver.patch deleted file mode 100644 index 8b86c504297..00000000000 --- a/target/linux/mediatek/patches-6.1/950-smartrg-i2c-led-driver.patch +++ /dev/null @@ -1,34 +0,0 @@ ---- - drivers/leds/Kconfig | 10 ++++++++++ - drivers/leds/Makefile | 1 + - 2 files changed, 11 insertions(+) - ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -874,6 +874,16 @@ source "drivers/leds/flash/Kconfig" - comment "RGB LED drivers" - source "drivers/leds/rgb/Kconfig" - -+config LEDS_SMARTRG_LED -+ tristate "LED support for Adtran SmartRG" -+ depends on LEDS_CLASS && I2C && OF -+ help -+ This option enables support for the Adtran SmartRG platform -+ system LED driver. -+ -+ To compile this driver as a module, choose M here: the module -+ will be called leds-smartrg-system. -+ - comment "LED Triggers" - source "drivers/leds/trigger/Kconfig" - ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -76,6 +76,7 @@ obj-$(CONFIG_LEDS_PWM) += leds-pwm.o - obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o - obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o - obj-$(CONFIG_LEDS_SC27XX_BLTC) += leds-sc27xx-bltc.o -+obj-$(CONFIG_LEDS_SMARTRG_LED) += leds-smartrg-system.o - obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o - obj-$(CONFIG_LEDS_SYSCON) += leds-syscon.o - obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o diff --git a/target/linux/mediatek/patches-6.1/961-net-ethernet-mediatek-split-tx-and-rx-fields-in-mtk_.patch b/target/linux/mediatek/patches-6.1/961-net-ethernet-mediatek-split-tx-and-rx-fields-in-mtk_.patch deleted file mode 100644 index 71cb3006ab8..00000000000 --- a/target/linux/mediatek/patches-6.1/961-net-ethernet-mediatek-split-tx-and-rx-fields-in-mtk_.patch +++ /dev/null @@ -1,599 +0,0 @@ -From: Lorenzo Bianconi -Date: Thu, 2 Nov 2023 16:47:07 +0100 -Subject: [PATCH net-next 1/2] net: ethernet: mediatek: split tx and rx fields - in mtk_soc_data struct - -Split tx and rx fields in mtk_soc_data struct. This is a preliminary -patch to roll back to QDMA for MT7986 SoC in order to fix a hw hang -if the device receives a corrupted packet. - -Signed-off-by: Lorenzo Bianconi ---- - drivers/net/ethernet/mediatek/mtk_eth_soc.c | 210 ++++++++++++-------- - drivers/net/ethernet/mediatek/mtk_eth_soc.h | 29 +-- - 2 files changed, 139 insertions(+), 100 deletions(-) - ---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c -+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c -@@ -1264,7 +1264,7 @@ static int mtk_init_fq_dma(struct mtk_et - eth->scratch_ring = eth->sram_base; - else - eth->scratch_ring = dma_alloc_coherent(eth->dma_dev, -- cnt * soc->txrx.txd_size, -+ cnt * soc->tx.desc_size, - ð->phy_scratch_ring, - GFP_KERNEL); - if (unlikely(!eth->scratch_ring)) -@@ -1280,16 +1280,16 @@ static int mtk_init_fq_dma(struct mtk_et - if (unlikely(dma_mapping_error(eth->dma_dev, dma_addr))) - return -ENOMEM; - -- phy_ring_tail = eth->phy_scratch_ring + soc->txrx.txd_size * (cnt - 1); -+ phy_ring_tail = eth->phy_scratch_ring + soc->tx.desc_size * (cnt - 1); - - for (i = 0; i < cnt; i++) { - struct mtk_tx_dma_v2 *txd; - -- txd = eth->scratch_ring + i * soc->txrx.txd_size; -+ txd = eth->scratch_ring + i * soc->tx.desc_size; - txd->txd1 = dma_addr + i * MTK_QDMA_PAGE_SIZE; - if (i < cnt - 1) - txd->txd2 = eth->phy_scratch_ring + -- (i + 1) * soc->txrx.txd_size; -+ (i + 1) * soc->tx.desc_size; - - txd->txd3 = TX_DMA_PLEN0(MTK_QDMA_PAGE_SIZE); - txd->txd4 = 0; -@@ -1538,7 +1538,7 @@ static int mtk_tx_map(struct sk_buff *sk - if (itxd == ring->last_free) - return -ENOMEM; - -- itx_buf = mtk_desc_to_tx_buf(ring, itxd, soc->txrx.txd_size); -+ itx_buf = mtk_desc_to_tx_buf(ring, itxd, soc->tx.desc_size); - memset(itx_buf, 0, sizeof(*itx_buf)); - - txd_info.addr = dma_map_single(eth->dma_dev, skb->data, txd_info.size, -@@ -1579,7 +1579,7 @@ static int mtk_tx_map(struct sk_buff *sk - - memset(&txd_info, 0, sizeof(struct mtk_tx_dma_desc_info)); - txd_info.size = min_t(unsigned int, frag_size, -- soc->txrx.dma_max_len); -+ soc->tx.dma_max_len); - txd_info.qid = queue; - txd_info.last = i == skb_shinfo(skb)->nr_frags - 1 && - !(frag_size - txd_info.size); -@@ -1592,7 +1592,7 @@ static int mtk_tx_map(struct sk_buff *sk - mtk_tx_set_dma_desc(dev, txd, &txd_info); - - tx_buf = mtk_desc_to_tx_buf(ring, txd, -- soc->txrx.txd_size); -+ soc->tx.desc_size); - if (new_desc) - memset(tx_buf, 0, sizeof(*tx_buf)); - tx_buf->data = (void *)MTK_DMA_DUMMY_DESC; -@@ -1635,7 +1635,7 @@ static int mtk_tx_map(struct sk_buff *sk - } else { - int next_idx; - -- next_idx = NEXT_DESP_IDX(txd_to_idx(ring, txd, soc->txrx.txd_size), -+ next_idx = NEXT_DESP_IDX(txd_to_idx(ring, txd, soc->tx.desc_size), - ring->dma_size); - mtk_w32(eth, next_idx, MT7628_TX_CTX_IDX0); - } -@@ -1644,7 +1644,7 @@ static int mtk_tx_map(struct sk_buff *sk - - err_dma: - do { -- tx_buf = mtk_desc_to_tx_buf(ring, itxd, soc->txrx.txd_size); -+ tx_buf = mtk_desc_to_tx_buf(ring, itxd, soc->tx.desc_size); - - /* unmap dma */ - mtk_tx_unmap(eth, tx_buf, NULL, false); -@@ -1669,7 +1669,7 @@ static int mtk_cal_txd_req(struct mtk_et - for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { - frag = &skb_shinfo(skb)->frags[i]; - nfrags += DIV_ROUND_UP(skb_frag_size(frag), -- eth->soc->txrx.dma_max_len); -+ eth->soc->tx.dma_max_len); - } - } else { - nfrags += skb_shinfo(skb)->nr_frags; -@@ -1810,7 +1810,7 @@ static struct mtk_rx_ring *mtk_get_rx_ri - - ring = ð->rx_ring[i]; - idx = NEXT_DESP_IDX(ring->calc_idx, ring->dma_size); -- rxd = ring->dma + idx * eth->soc->txrx.rxd_size; -+ rxd = ring->dma + idx * eth->soc->rx.desc_size; - if (rxd->rxd2 & RX_DMA_DONE) { - ring->calc_idx_update = true; - return ring; -@@ -1978,7 +1978,7 @@ static int mtk_xdp_submit_frame(struct m - } - htxd = txd; - -- tx_buf = mtk_desc_to_tx_buf(ring, txd, soc->txrx.txd_size); -+ tx_buf = mtk_desc_to_tx_buf(ring, txd, soc->tx.desc_size); - memset(tx_buf, 0, sizeof(*tx_buf)); - htx_buf = tx_buf; - -@@ -1997,7 +1997,7 @@ static int mtk_xdp_submit_frame(struct m - goto unmap; - - tx_buf = mtk_desc_to_tx_buf(ring, txd, -- soc->txrx.txd_size); -+ soc->tx.desc_size); - memset(tx_buf, 0, sizeof(*tx_buf)); - n_desc++; - } -@@ -2035,7 +2035,7 @@ static int mtk_xdp_submit_frame(struct m - } else { - int idx; - -- idx = txd_to_idx(ring, txd, soc->txrx.txd_size); -+ idx = txd_to_idx(ring, txd, soc->tx.desc_size); - mtk_w32(eth, NEXT_DESP_IDX(idx, ring->dma_size), - MT7628_TX_CTX_IDX0); - } -@@ -2046,7 +2046,7 @@ static int mtk_xdp_submit_frame(struct m - - unmap: - while (htxd != txd) { -- tx_buf = mtk_desc_to_tx_buf(ring, htxd, soc->txrx.txd_size); -+ tx_buf = mtk_desc_to_tx_buf(ring, htxd, soc->tx.desc_size); - mtk_tx_unmap(eth, tx_buf, NULL, false); - - htxd->txd3 = TX_DMA_LS0 | TX_DMA_OWNER_CPU; -@@ -2177,7 +2177,7 @@ static int mtk_poll_rx(struct napi_struc - goto rx_done; - - idx = NEXT_DESP_IDX(ring->calc_idx, ring->dma_size); -- rxd = ring->dma + idx * eth->soc->txrx.rxd_size; -+ rxd = ring->dma + idx * eth->soc->rx.desc_size; - data = ring->data[idx]; - - if (!mtk_rx_get_desc(eth, &trxd, rxd)) -@@ -2312,7 +2312,7 @@ static int mtk_poll_rx(struct napi_struc - rxdcsum = &trxd.rxd4; - } - -- if (*rxdcsum & eth->soc->txrx.rx_dma_l4_valid) -+ if (*rxdcsum & eth->soc->rx.dma_l4_valid) - skb->ip_summed = CHECKSUM_UNNECESSARY; - else - skb_checksum_none_assert(skb); -@@ -2436,7 +2436,7 @@ static int mtk_poll_tx_qdma(struct mtk_e - break; - - tx_buf = mtk_desc_to_tx_buf(ring, desc, -- eth->soc->txrx.txd_size); -+ eth->soc->tx.desc_size); - if (!tx_buf->data) - break; - -@@ -2487,7 +2487,7 @@ static int mtk_poll_tx_pdma(struct mtk_e - } - mtk_tx_unmap(eth, tx_buf, &bq, true); - -- desc = ring->dma + cpu * eth->soc->txrx.txd_size; -+ desc = ring->dma + cpu * eth->soc->tx.desc_size; - ring->last_free = desc; - atomic_inc(&ring->free_count); - -@@ -2577,7 +2577,7 @@ static int mtk_napi_rx(struct napi_struc - do { - int rx_done; - -- mtk_w32(eth, eth->soc->txrx.rx_irq_done_mask, -+ mtk_w32(eth, eth->soc->rx.irq_done_mask, - reg_map->pdma.irq_status); - rx_done = mtk_poll_rx(napi, budget - rx_done_total, eth); - rx_done_total += rx_done; -@@ -2593,10 +2593,10 @@ static int mtk_napi_rx(struct napi_struc - return budget; - - } while (mtk_r32(eth, reg_map->pdma.irq_status) & -- eth->soc->txrx.rx_irq_done_mask); -+ eth->soc->rx.irq_done_mask); - - if (napi_complete_done(napi, rx_done_total)) -- mtk_rx_irq_enable(eth, eth->soc->txrx.rx_irq_done_mask); -+ mtk_rx_irq_enable(eth, eth->soc->rx.irq_done_mask); - - return rx_done_total; - } -@@ -2605,7 +2605,7 @@ static int mtk_tx_alloc(struct mtk_eth * - { - const struct mtk_soc_data *soc = eth->soc; - struct mtk_tx_ring *ring = ð->tx_ring; -- int i, sz = soc->txrx.txd_size; -+ int i, sz = soc->tx.desc_size; - struct mtk_tx_dma_v2 *txd; - int ring_size; - u32 ofs, val; -@@ -2728,14 +2728,14 @@ static void mtk_tx_clean(struct mtk_eth - } - if (!MTK_HAS_CAPS(soc->caps, MTK_SRAM) && ring->dma) { - dma_free_coherent(eth->dma_dev, -- ring->dma_size * soc->txrx.txd_size, -+ ring->dma_size * soc->tx.desc_size, - ring->dma, ring->phys); - ring->dma = NULL; - } - - if (ring->dma_pdma) { - dma_free_coherent(eth->dma_dev, -- ring->dma_size * soc->txrx.txd_size, -+ ring->dma_size * soc->tx.desc_size, - ring->dma_pdma, ring->phys_pdma); - ring->dma_pdma = NULL; - } -@@ -2790,15 +2790,15 @@ static int mtk_rx_alloc(struct mtk_eth * - if (!MTK_HAS_CAPS(eth->soc->caps, MTK_SRAM) || - rx_flag != MTK_RX_FLAGS_NORMAL) { - ring->dma = dma_alloc_coherent(eth->dma_dev, -- rx_dma_size * eth->soc->txrx.rxd_size, -- &ring->phys, GFP_KERNEL); -+ rx_dma_size * eth->soc->rx.desc_size, -+ &ring->phys, GFP_KERNEL); - } else { - struct mtk_tx_ring *tx_ring = ð->tx_ring; - - ring->dma = tx_ring->dma + tx_ring_size * -- eth->soc->txrx.txd_size * (ring_no + 1); -+ eth->soc->tx.desc_size * (ring_no + 1); - ring->phys = tx_ring->phys + tx_ring_size * -- eth->soc->txrx.txd_size * (ring_no + 1); -+ eth->soc->tx.desc_size * (ring_no + 1); - } - - if (!ring->dma) -@@ -2809,7 +2809,7 @@ static int mtk_rx_alloc(struct mtk_eth * - dma_addr_t dma_addr; - void *data; - -- rxd = ring->dma + i * eth->soc->txrx.rxd_size; -+ rxd = ring->dma + i * eth->soc->rx.desc_size; - if (ring->page_pool) { - data = mtk_page_pool_get_buff(ring->page_pool, - &dma_addr, GFP_KERNEL); -@@ -2900,7 +2900,7 @@ static void mtk_rx_clean(struct mtk_eth - if (!ring->data[i]) - continue; - -- rxd = ring->dma + i * eth->soc->txrx.rxd_size; -+ rxd = ring->dma + i * eth->soc->rx.desc_size; - if (!rxd->rxd1) - continue; - -@@ -2917,7 +2917,7 @@ static void mtk_rx_clean(struct mtk_eth - - if (!in_sram && ring->dma) { - dma_free_coherent(eth->dma_dev, -- ring->dma_size * eth->soc->txrx.rxd_size, -+ ring->dma_size * eth->soc->rx.desc_size, - ring->dma, ring->phys); - ring->dma = NULL; - } -@@ -3280,7 +3280,7 @@ static void mtk_dma_free(struct mtk_eth - netdev_reset_queue(eth->netdev[i]); - if (!MTK_HAS_CAPS(soc->caps, MTK_SRAM) && eth->scratch_ring) { - dma_free_coherent(eth->dma_dev, -- MTK_QDMA_RING_SIZE * soc->txrx.txd_size, -+ MTK_QDMA_RING_SIZE * soc->tx.desc_size, - eth->scratch_ring, eth->phy_scratch_ring); - eth->scratch_ring = NULL; - eth->phy_scratch_ring = 0; -@@ -3330,7 +3330,7 @@ static irqreturn_t mtk_handle_irq_rx(int - - eth->rx_events++; - if (likely(napi_schedule_prep(ð->rx_napi))) { -- mtk_rx_irq_disable(eth, eth->soc->txrx.rx_irq_done_mask); -+ mtk_rx_irq_disable(eth, eth->soc->rx.irq_done_mask); - __napi_schedule(ð->rx_napi); - } - -@@ -3356,9 +3356,9 @@ static irqreturn_t mtk_handle_irq(int ir - const struct mtk_reg_map *reg_map = eth->soc->reg_map; - - if (mtk_r32(eth, reg_map->pdma.irq_mask) & -- eth->soc->txrx.rx_irq_done_mask) { -+ eth->soc->rx.irq_done_mask) { - if (mtk_r32(eth, reg_map->pdma.irq_status) & -- eth->soc->txrx.rx_irq_done_mask) -+ eth->soc->rx.irq_done_mask) - mtk_handle_irq_rx(irq, _eth); - } - if (mtk_r32(eth, reg_map->tx_irq_mask) & MTK_TX_DONE_INT) { -@@ -3376,10 +3376,10 @@ static void mtk_poll_controller(struct n - struct mtk_eth *eth = mac->hw; - - mtk_tx_irq_disable(eth, MTK_TX_DONE_INT); -- mtk_rx_irq_disable(eth, eth->soc->txrx.rx_irq_done_mask); -+ mtk_rx_irq_disable(eth, eth->soc->rx.irq_done_mask); - mtk_handle_irq_rx(eth->irq[2], dev); - mtk_tx_irq_enable(eth, MTK_TX_DONE_INT); -- mtk_rx_irq_enable(eth, eth->soc->txrx.rx_irq_done_mask); -+ mtk_rx_irq_enable(eth, eth->soc->rx.irq_done_mask); - } - #endif - -@@ -3545,7 +3545,7 @@ static int mtk_open(struct net_device *d - napi_enable(ð->tx_napi); - napi_enable(ð->rx_napi); - mtk_tx_irq_enable(eth, MTK_TX_DONE_INT); -- mtk_rx_irq_enable(eth, soc->txrx.rx_irq_done_mask); -+ mtk_rx_irq_enable(eth, soc->rx.irq_done_mask); - refcount_set(ð->dma_refcnt, 1); - } - else -@@ -3628,7 +3628,7 @@ static int mtk_stop(struct net_device *d - mtk_gdm_config(eth, MTK_GDMA_DROP_ALL); - - mtk_tx_irq_disable(eth, MTK_TX_DONE_INT); -- mtk_rx_irq_disable(eth, eth->soc->txrx.rx_irq_done_mask); -+ mtk_rx_irq_disable(eth, eth->soc->rx.irq_done_mask); - napi_disable(ð->tx_napi); - napi_disable(ð->rx_napi); - -@@ -4107,9 +4107,9 @@ static int mtk_hw_init(struct mtk_eth *e - - /* FE int grouping */ - mtk_w32(eth, MTK_TX_DONE_INT, reg_map->pdma.int_grp); -- mtk_w32(eth, eth->soc->txrx.rx_irq_done_mask, reg_map->pdma.int_grp + 4); -+ mtk_w32(eth, eth->soc->rx.irq_done_mask, reg_map->pdma.int_grp + 4); - mtk_w32(eth, MTK_TX_DONE_INT, reg_map->qdma.int_grp); -- mtk_w32(eth, eth->soc->txrx.rx_irq_done_mask, reg_map->qdma.int_grp + 4); -+ mtk_w32(eth, eth->soc->rx.irq_done_mask, reg_map->qdma.int_grp + 4); - mtk_w32(eth, 0x21021000, MTK_FE_INT_GRP); - - if (mtk_is_netsys_v3_or_greater(eth)) { -@@ -5270,11 +5270,15 @@ static const struct mtk_soc_data mt2701_ - .required_clks = MT7623_CLKS_BITMAP, - .required_pctl = true, - .version = 1, -- .txrx = { -- .txd_size = sizeof(struct mtk_tx_dma), -- .rxd_size = sizeof(struct mtk_rx_dma), -- .rx_irq_done_mask = MTK_RX_DONE_INT, -- .rx_dma_l4_valid = RX_DMA_L4_VALID, -+ .tx = { -+ .desc_size = sizeof(struct mtk_tx_dma), -+ .dma_max_len = MTK_TX_DMA_BUF_LEN, -+ .dma_len_offset = 16, -+ }, -+ .rx = { -+ .desc_size = sizeof(struct mtk_rx_dma), -+ .irq_done_mask = MTK_RX_DONE_INT, -+ .dma_l4_valid = RX_DMA_L4_VALID, - .dma_max_len = MTK_TX_DMA_BUF_LEN, - .dma_len_offset = 16, - }, -@@ -5290,11 +5294,15 @@ static const struct mtk_soc_data mt7621_ - .offload_version = 1, - .hash_offset = 2, - .foe_entry_size = MTK_FOE_ENTRY_V1_SIZE, -- .txrx = { -- .txd_size = sizeof(struct mtk_tx_dma), -- .rxd_size = sizeof(struct mtk_rx_dma), -- .rx_irq_done_mask = MTK_RX_DONE_INT, -- .rx_dma_l4_valid = RX_DMA_L4_VALID, -+ .tx = { -+ .desc_size = sizeof(struct mtk_tx_dma), -+ .dma_max_len = MTK_TX_DMA_BUF_LEN, -+ .dma_len_offset = 16, -+ }, -+ .rx = { -+ .desc_size = sizeof(struct mtk_rx_dma), -+ .irq_done_mask = MTK_RX_DONE_INT, -+ .dma_l4_valid = RX_DMA_L4_VALID, - .dma_max_len = MTK_TX_DMA_BUF_LEN, - .dma_len_offset = 16, - }, -@@ -5312,11 +5320,15 @@ static const struct mtk_soc_data mt7622_ - .hash_offset = 2, - .has_accounting = true, - .foe_entry_size = MTK_FOE_ENTRY_V1_SIZE, -- .txrx = { -- .txd_size = sizeof(struct mtk_tx_dma), -- .rxd_size = sizeof(struct mtk_rx_dma), -- .rx_irq_done_mask = MTK_RX_DONE_INT, -- .rx_dma_l4_valid = RX_DMA_L4_VALID, -+ .tx = { -+ .desc_size = sizeof(struct mtk_tx_dma), -+ .dma_max_len = MTK_TX_DMA_BUF_LEN, -+ .dma_len_offset = 16, -+ }, -+ .rx = { -+ .desc_size = sizeof(struct mtk_rx_dma), -+ .irq_done_mask = MTK_RX_DONE_INT, -+ .dma_l4_valid = RX_DMA_L4_VALID, - .dma_max_len = MTK_TX_DMA_BUF_LEN, - .dma_len_offset = 16, - }, -@@ -5333,11 +5345,15 @@ static const struct mtk_soc_data mt7623_ - .hash_offset = 2, - .foe_entry_size = MTK_FOE_ENTRY_V1_SIZE, - .disable_pll_modes = true, -- .txrx = { -- .txd_size = sizeof(struct mtk_tx_dma), -- .rxd_size = sizeof(struct mtk_rx_dma), -- .rx_irq_done_mask = MTK_RX_DONE_INT, -- .rx_dma_l4_valid = RX_DMA_L4_VALID, -+ .tx = { -+ .desc_size = sizeof(struct mtk_tx_dma), -+ .dma_max_len = MTK_TX_DMA_BUF_LEN, -+ .dma_len_offset = 16, -+ }, -+ .rx = { -+ .desc_size = sizeof(struct mtk_rx_dma), -+ .irq_done_mask = MTK_RX_DONE_INT, -+ .dma_l4_valid = RX_DMA_L4_VALID, - .dma_max_len = MTK_TX_DMA_BUF_LEN, - .dma_len_offset = 16, - }, -@@ -5352,11 +5368,15 @@ static const struct mtk_soc_data mt7629_ - .required_pctl = false, - .has_accounting = true, - .version = 1, -- .txrx = { -- .txd_size = sizeof(struct mtk_tx_dma), -- .rxd_size = sizeof(struct mtk_rx_dma), -- .rx_irq_done_mask = MTK_RX_DONE_INT, -- .rx_dma_l4_valid = RX_DMA_L4_VALID, -+ .tx = { -+ .desc_size = sizeof(struct mtk_tx_dma), -+ .dma_max_len = MTK_TX_DMA_BUF_LEN, -+ .dma_len_offset = 16, -+ }, -+ .rx = { -+ .desc_size = sizeof(struct mtk_rx_dma), -+ .irq_done_mask = MTK_RX_DONE_INT, -+ .dma_l4_valid = RX_DMA_L4_VALID, - .dma_max_len = MTK_TX_DMA_BUF_LEN, - .dma_len_offset = 16, - }, -@@ -5374,11 +5394,15 @@ static const struct mtk_soc_data mt7981_ - .hash_offset = 4, - .has_accounting = true, - .foe_entry_size = MTK_FOE_ENTRY_V2_SIZE, -- .txrx = { -- .txd_size = sizeof(struct mtk_tx_dma_v2), -- .rxd_size = sizeof(struct mtk_rx_dma_v2), -- .rx_irq_done_mask = MTK_RX_DONE_INT_V2, -- .rx_dma_l4_valid = RX_DMA_L4_VALID_V2, -+ .tx = { -+ .desc_size = sizeof(struct mtk_tx_dma_v2), -+ .dma_max_len = MTK_TX_DMA_BUF_LEN_V2, -+ .dma_len_offset = 8, -+ }, -+ .rx = { -+ .desc_size = sizeof(struct mtk_rx_dma_v2), -+ .irq_done_mask = MTK_RX_DONE_INT_V2, -+ .dma_l4_valid = RX_DMA_L4_VALID_V2, - .dma_max_len = MTK_TX_DMA_BUF_LEN_V2, - .dma_len_offset = 8, - }, -@@ -5396,11 +5420,15 @@ static const struct mtk_soc_data mt7986_ - .hash_offset = 4, - .has_accounting = true, - .foe_entry_size = MTK_FOE_ENTRY_V2_SIZE, -- .txrx = { -- .txd_size = sizeof(struct mtk_tx_dma_v2), -- .rxd_size = sizeof(struct mtk_rx_dma_v2), -- .rx_irq_done_mask = MTK_RX_DONE_INT_V2, -- .rx_dma_l4_valid = RX_DMA_L4_VALID_V2, -+ .tx = { -+ .desc_size = sizeof(struct mtk_tx_dma_v2), -+ .dma_max_len = MTK_TX_DMA_BUF_LEN_V2, -+ .dma_len_offset = 8, -+ }, -+ .rx = { -+ .desc_size = sizeof(struct mtk_rx_dma_v2), -+ .irq_done_mask = MTK_RX_DONE_INT_V2, -+ .dma_l4_valid = RX_DMA_L4_VALID_V2, - .dma_max_len = MTK_TX_DMA_BUF_LEN_V2, - .dma_len_offset = 8, - }, -@@ -5418,11 +5446,15 @@ static const struct mtk_soc_data mt7988_ - .hash_offset = 4, - .has_accounting = true, - .foe_entry_size = MTK_FOE_ENTRY_V3_SIZE, -- .txrx = { -- .txd_size = sizeof(struct mtk_tx_dma_v2), -- .rxd_size = sizeof(struct mtk_rx_dma_v2), -- .rx_irq_done_mask = MTK_RX_DONE_INT_V2, -- .rx_dma_l4_valid = RX_DMA_L4_VALID_V2, -+ .tx = { -+ .desc_size = sizeof(struct mtk_tx_dma_v2), -+ .dma_max_len = MTK_TX_DMA_BUF_LEN_V2, -+ .dma_len_offset = 8, -+ }, -+ .rx = { -+ .desc_size = sizeof(struct mtk_rx_dma_v2), -+ .irq_done_mask = MTK_RX_DONE_INT_V2, -+ .dma_l4_valid = RX_DMA_L4_VALID_V2, - .dma_max_len = MTK_TX_DMA_BUF_LEN_V2, - .dma_len_offset = 8, - }, -@@ -5435,11 +5467,15 @@ static const struct mtk_soc_data rt5350_ - .required_clks = MT7628_CLKS_BITMAP, - .required_pctl = false, - .version = 1, -- .txrx = { -- .txd_size = sizeof(struct mtk_tx_dma), -- .rxd_size = sizeof(struct mtk_rx_dma), -- .rx_irq_done_mask = MTK_RX_DONE_INT, -- .rx_dma_l4_valid = RX_DMA_L4_VALID_PDMA, -+ .tx = { -+ .desc_size = sizeof(struct mtk_tx_dma), -+ .dma_max_len = MTK_TX_DMA_BUF_LEN, -+ .dma_len_offset = 16, -+ }, -+ .rx = { -+ .desc_size = sizeof(struct mtk_rx_dma), -+ .irq_done_mask = MTK_RX_DONE_INT, -+ .dma_l4_valid = RX_DMA_L4_VALID_PDMA, - .dma_max_len = MTK_TX_DMA_BUF_LEN, - .dma_len_offset = 16, - }, ---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h -+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h -@@ -327,8 +327,8 @@ - /* QDMA descriptor txd3 */ - #define TX_DMA_OWNER_CPU BIT(31) - #define TX_DMA_LS0 BIT(30) --#define TX_DMA_PLEN0(x) (((x) & eth->soc->txrx.dma_max_len) << eth->soc->txrx.dma_len_offset) --#define TX_DMA_PLEN1(x) ((x) & eth->soc->txrx.dma_max_len) -+#define TX_DMA_PLEN0(x) (((x) & eth->soc->tx.dma_max_len) << eth->soc->tx.dma_len_offset) -+#define TX_DMA_PLEN1(x) ((x) & eth->soc->tx.dma_max_len) - #define TX_DMA_SWC BIT(14) - #define TX_DMA_PQID GENMASK(3, 0) - #define TX_DMA_ADDR64_MASK GENMASK(3, 0) -@@ -348,8 +348,8 @@ - /* QDMA descriptor rxd2 */ - #define RX_DMA_DONE BIT(31) - #define RX_DMA_LSO BIT(30) --#define RX_DMA_PREP_PLEN0(x) (((x) & eth->soc->txrx.dma_max_len) << eth->soc->txrx.dma_len_offset) --#define RX_DMA_GET_PLEN0(x) (((x) >> eth->soc->txrx.dma_len_offset) & eth->soc->txrx.dma_max_len) -+#define RX_DMA_PREP_PLEN0(x) (((x) & eth->soc->rx.dma_max_len) << eth->soc->rx.dma_len_offset) -+#define RX_DMA_GET_PLEN0(x) (((x) >> eth->soc->rx.dma_len_offset) & eth->soc->rx.dma_max_len) - #define RX_DMA_VTAG BIT(15) - #define RX_DMA_ADDR64_MASK GENMASK(3, 0) - #if IS_ENABLED(CONFIG_64BIT) -@@ -1209,10 +1209,9 @@ struct mtk_reg_map { - * @foe_entry_size Foe table entry size. - * @has_accounting Bool indicating support for accounting of - * offloaded flows. -- * @txd_size Tx DMA descriptor size. -- * @rxd_size Rx DMA descriptor size. -- * @rx_irq_done_mask Rx irq done register mask. -- * @rx_dma_l4_valid Rx DMA valid register mask. -+ * @desc_size Tx/Rx DMA descriptor size. -+ * @irq_done_mask Rx irq done register mask. -+ * @dma_l4_valid Rx DMA valid register mask. - * @dma_max_len Max DMA tx/rx buffer length. - * @dma_len_offset Tx/Rx DMA length field offset. - */ -@@ -1230,13 +1229,17 @@ struct mtk_soc_data { - bool has_accounting; - bool disable_pll_modes; - struct { -- u32 txd_size; -- u32 rxd_size; -- u32 rx_irq_done_mask; -- u32 rx_dma_l4_valid; -+ u32 desc_size; - u32 dma_max_len; - u32 dma_len_offset; -- } txrx; -+ } tx; -+ struct { -+ u32 desc_size; -+ u32 irq_done_mask; -+ u32 dma_l4_valid; -+ u32 dma_max_len; -+ u32 dma_len_offset; -+ } rx; - }; - - #define MTK_DMA_MONITOR_TIMEOUT msecs_to_jiffies(1000) diff --git a/target/linux/mediatek/patches-6.1/962-net-ethernet-mediatek-use-QDMA-instead-of-ADMAv2-on-.patch b/target/linux/mediatek/patches-6.1/962-net-ethernet-mediatek-use-QDMA-instead-of-ADMAv2-on-.patch deleted file mode 100644 index 8b7d5c0a1c9..00000000000 --- a/target/linux/mediatek/patches-6.1/962-net-ethernet-mediatek-use-QDMA-instead-of-ADMAv2-on-.patch +++ /dev/null @@ -1,123 +0,0 @@ -From: Daniel Golle -Date: Tue, 10 Oct 2023 21:06:43 +0200 -Subject: [PATCH net-next 2/2] net: ethernet: mediatek: use QDMA instead of - ADMAv2 on MT7981 and MT7986 - -ADMA is plagued by RX hangs which can't easily detected and happen upon -receival of a corrupted package. -Use QDMA just like on netsys v1 which is also still present and usable, and -doesn't suffer from that problem. - -Co-developed-by: Lorenzo Bianconi -Signed-off-by: Lorenzo Bianconi -Signed-off-by: Daniel Golle ---- - drivers/net/ethernet/mediatek/mtk_eth_soc.c | 46 ++++++++++----------- - 1 file changed, 23 insertions(+), 23 deletions(-) - ---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c -+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c -@@ -110,16 +110,16 @@ static const struct mtk_reg_map mt7986_r - .tx_irq_mask = 0x461c, - .tx_irq_status = 0x4618, - .pdma = { -- .rx_ptr = 0x6100, -- .rx_cnt_cfg = 0x6104, -- .pcrx_ptr = 0x6108, -- .glo_cfg = 0x6204, -- .rst_idx = 0x6208, -- .delay_irq = 0x620c, -- .irq_status = 0x6220, -- .irq_mask = 0x6228, -- .adma_rx_dbg0 = 0x6238, -- .int_grp = 0x6250, -+ .rx_ptr = 0x4100, -+ .rx_cnt_cfg = 0x4104, -+ .pcrx_ptr = 0x4108, -+ .glo_cfg = 0x4204, -+ .rst_idx = 0x4208, -+ .delay_irq = 0x420c, -+ .irq_status = 0x4220, -+ .irq_mask = 0x4228, -+ .adma_rx_dbg0 = 0x4238, -+ .int_grp = 0x4250, - }, - .qdma = { - .qtx_cfg = 0x4400, -@@ -1232,7 +1232,7 @@ static bool mtk_rx_get_desc(struct mtk_e - rxd->rxd1 = READ_ONCE(dma_rxd->rxd1); - rxd->rxd3 = READ_ONCE(dma_rxd->rxd3); - rxd->rxd4 = READ_ONCE(dma_rxd->rxd4); -- if (mtk_is_netsys_v2_or_greater(eth)) { -+ if (mtk_is_netsys_v3_or_greater(eth)) { - rxd->rxd5 = READ_ONCE(dma_rxd->rxd5); - rxd->rxd6 = READ_ONCE(dma_rxd->rxd6); - } -@@ -2184,7 +2184,7 @@ static int mtk_poll_rx(struct napi_struc - break; - - /* find out which mac the packet come from. values start at 1 */ -- if (mtk_is_netsys_v2_or_greater(eth)) { -+ if (mtk_is_netsys_v3_or_greater(eth)) { - u32 val = RX_DMA_GET_SPORT_V2(trxd.rxd5); - - switch (val) { -@@ -2296,7 +2296,7 @@ static int mtk_poll_rx(struct napi_struc - skb->dev = netdev; - bytes += skb->len; - -- if (mtk_is_netsys_v2_or_greater(eth)) { -+ if (mtk_is_netsys_v3_or_greater(eth)) { - reason = FIELD_GET(MTK_RXD5_PPE_CPU_REASON, trxd.rxd5); - hash = trxd.rxd5 & MTK_RXD5_FOE_ENTRY; - if (hash != MTK_RXD5_FOE_ENTRY) -@@ -2846,7 +2846,7 @@ static int mtk_rx_alloc(struct mtk_eth * - - rxd->rxd3 = 0; - rxd->rxd4 = 0; -- if (mtk_is_netsys_v2_or_greater(eth)) { -+ if (mtk_is_netsys_v3_or_greater(eth)) { - rxd->rxd5 = 0; - rxd->rxd6 = 0; - rxd->rxd7 = 0; -@@ -4053,7 +4053,7 @@ static int mtk_hw_init(struct mtk_eth *e - else - mtk_hw_reset(eth); - -- if (mtk_is_netsys_v2_or_greater(eth)) { -+ if (mtk_is_netsys_v3_or_greater(eth)) { - /* Set FE to PDMAv2 if necessary */ - val = mtk_r32(eth, MTK_FE_GLO_MISC); - mtk_w32(eth, val | BIT(4), MTK_FE_GLO_MISC); -@@ -5400,11 +5400,11 @@ static const struct mtk_soc_data mt7981_ - .dma_len_offset = 8, - }, - .rx = { -- .desc_size = sizeof(struct mtk_rx_dma_v2), -- .irq_done_mask = MTK_RX_DONE_INT_V2, -+ .desc_size = sizeof(struct mtk_rx_dma), -+ .irq_done_mask = MTK_RX_DONE_INT, - .dma_l4_valid = RX_DMA_L4_VALID_V2, -- .dma_max_len = MTK_TX_DMA_BUF_LEN_V2, -- .dma_len_offset = 8, -+ .dma_max_len = MTK_TX_DMA_BUF_LEN, -+ .dma_len_offset = 16, - }, - }; - -@@ -5426,11 +5426,11 @@ static const struct mtk_soc_data mt7986_ - .dma_len_offset = 8, - }, - .rx = { -- .desc_size = sizeof(struct mtk_rx_dma_v2), -- .irq_done_mask = MTK_RX_DONE_INT_V2, -+ .desc_size = sizeof(struct mtk_rx_dma), -+ .irq_done_mask = MTK_RX_DONE_INT, - .dma_l4_valid = RX_DMA_L4_VALID_V2, -- .dma_max_len = MTK_TX_DMA_BUF_LEN_V2, -- .dma_len_offset = 8, -+ .dma_max_len = MTK_TX_DMA_BUF_LEN, -+ .dma_len_offset = 16, - }, - }; - diff --git a/target/linux/mediatek/patches-6.1/963-net-ethernet-mtk_eth_soc-fix-WED-wifi-reset.patch b/target/linux/mediatek/patches-6.1/963-net-ethernet-mtk_eth_soc-fix-WED-wifi-reset.patch deleted file mode 100644 index 11b52d07ab3..00000000000 --- a/target/linux/mediatek/patches-6.1/963-net-ethernet-mtk_eth_soc-fix-WED-wifi-reset.patch +++ /dev/null @@ -1,49 +0,0 @@ -From: Felix Fietkau -Date: Thu, 18 Jan 2024 12:51:32 +0100 -Subject: [PATCH] net: ethernet: mtk_eth_soc: fix WED + wifi reset - -The WLAN + WED reset sequence relies on being able to receive interrupts from -the card, in order to synchronize individual steps with the firmware. -When WED is stopped, leave interrupts running and rely on the driver turning -off unwanted ones. -WED DMA also needs to be disabled before resetting. - -Fixes: f78cd9c783e0 ("net: ethernet: mtk_wed: update mtk_wed_stop") -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/net/ethernet/mediatek/mtk_wed.c -+++ b/drivers/net/ethernet/mediatek/mtk_wed.c -@@ -1071,13 +1071,13 @@ mtk_wed_dma_disable(struct mtk_wed_devic - static void - mtk_wed_stop(struct mtk_wed_device *dev) - { -+ mtk_wed_dma_disable(dev); - mtk_wed_set_ext_int(dev, false); - - wed_w32(dev, MTK_WED_WPDMA_INT_TRIGGER, 0); - wed_w32(dev, MTK_WED_WDMA_INT_TRIGGER, 0); - wdma_w32(dev, MTK_WDMA_INT_MASK, 0); - wdma_w32(dev, MTK_WDMA_INT_GRP2, 0); -- wed_w32(dev, MTK_WED_WPDMA_INT_MASK, 0); - - if (!mtk_wed_get_rx_capa(dev)) - return; -@@ -1090,7 +1090,6 @@ static void - mtk_wed_deinit(struct mtk_wed_device *dev) - { - mtk_wed_stop(dev); -- mtk_wed_dma_disable(dev); - - wed_clr(dev, MTK_WED_CTRL, - MTK_WED_CTRL_WDMA_INT_AGENT_EN | -@@ -2621,9 +2620,6 @@ mtk_wed_irq_get(struct mtk_wed_device *d - static void - mtk_wed_irq_set_mask(struct mtk_wed_device *dev, u32 mask) - { -- if (!dev->running) -- return; -- - mtk_wed_set_ext_int(dev, !!mask); - wed_w32(dev, MTK_WED_INT_MASK, mask); - }