mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 02:29:01 +00:00
ath79: Add support for TP-Link CPE210 v3
Specifications:
* SoC: Qualcomm Atheros QCA9533 (650MHz)
* RAM: 64MB
* Storage: 8 MB SPI NOR
* Wireless: 2.4GHz N based built into SoC 2x2
* Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN
Installation:
Flash factory image through stock firmware WEB UI or TFTP
To get to TFTP recovery just hold reset button while powering
on for around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
Thanks to robimarko for the work inside the ar71xx tree.
Thanks to adrianschmutzler for deep discussion and fixes.
Signed-off-by: Mario Schroen <m.schroen@web.de>
[Split into DTS/DTSI, read-only config partition in DTSI]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[renamed dtsi filename, light subject touches]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
This commit is contained in:
Mario Schroen
Petr Štetiar
parent
99f6f2c0b8
commit
5ec205d7ac
@ -123,6 +123,14 @@ tplink,archer-c6-v2)
|
||||
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x3C"
|
||||
ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x02"
|
||||
;;
|
||||
tplink,cpe210-v3)
|
||||
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
|
||||
ucidef_set_rssimon "wlan0" "200000" "1"
|
||||
ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100"
|
||||
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "30" "100"
|
||||
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "60" "100"
|
||||
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "80" "100"
|
||||
;;
|
||||
tplink,re450-v2)
|
||||
ucidef_set_led_netdev "lan_data" "LAN Data" "tp-link:green:lan_data" "eth0" "tx rx"
|
||||
ucidef_set_led_netdev "lan_link" "LAN Link" "tp-link:green:lan_link" "eth0" "link"
|
||||
|
||||
@ -19,6 +19,7 @@ ath79_setup_interfaces()
|
||||
pcs,cap324|\
|
||||
pisen,wmm003n|\
|
||||
pqi,air-pen|\
|
||||
tplink,cpe210-v3|\
|
||||
tplink,re350k-v1|\
|
||||
tplink,re450-v2|\
|
||||
tplink,tl-mr10u|\
|
||||
|
||||
9
target/linux/ath79/dts/qca9533_tplink_cpe210-v3.dts
Normal file
9
target/linux/ath79/dts/qca9533_tplink_cpe210-v3.dts
Normal file
@ -0,0 +1,9 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "qca9533_tplink_cpe210.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "tplink,cpe210-v3", "qca,qca9533";
|
||||
model = "TP-LINK CPE210 v3";
|
||||
};
|
||||
125
target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi
Normal file
125
target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi
Normal file
@ -0,0 +1,125 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "qca953x.dtsi"
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8";
|
||||
};
|
||||
|
||||
aliases {
|
||||
led-boot = &system;
|
||||
led-failsafe = &system;
|
||||
led-running = &system;
|
||||
led-upgrade = &system;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
lan {
|
||||
label = "tp-link:green:lan";
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
link1 {
|
||||
label = "tp-link:green:link1";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
link2 {
|
||||
label = "tp-link:green:link2";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
link3 {
|
||||
label = "tp-link:green:link3";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
system: link4 {
|
||||
label = "tp-link:green:link4";
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&uart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
uboot: partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x000000 0x020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
label = "partition-table";
|
||||
reg = <0x020000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
info: partition@30000 {
|
||||
label = "product-info";
|
||||
reg = <0x030000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "firmware";
|
||||
reg = <0x040000 0x780000>;
|
||||
compatible = "tplink,firmware";
|
||||
};
|
||||
|
||||
config: partition@7c0000 {
|
||||
label = "config";
|
||||
reg = <0x7c0000 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
ART: partition@7f0000 {
|
||||
label = "ART";
|
||||
reg = <0x7f0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
phy-handle = <&swphy4>;
|
||||
mtd-mac-address = <&info 0x8>;
|
||||
};
|
||||
|
||||
ð1 {
|
||||
compatible = "syscon", "simple-mfd";
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
mtd-cal-data = <&ART 0x1000>;
|
||||
mtd-mac-address = <&info 0x8>;
|
||||
};
|
||||
@ -109,6 +109,19 @@ define Device/tplink_archer-c7-v5
|
||||
endef
|
||||
TARGET_DEVICES += tplink_archer-c7-v5
|
||||
|
||||
define Device/tplink_cpe210-v3
|
||||
$(Device/tplink-safeloader)
|
||||
ATH_SOC := qca9533
|
||||
IMAGE_SIZE := 7680k
|
||||
DEVICE_TITLE := TP-Link CPE210 v3
|
||||
DEVICE_PACKAGES := rssileds
|
||||
TPLINK_BOARD_ID := CPE210V3
|
||||
LOADER_TYPE := elf
|
||||
KERNEL := kernel-bin | append-dtb | lzma | tplink-v1-header -O
|
||||
SUPPORTED_DEVICES += cpe210-v3
|
||||
endef
|
||||
TARGET_DEVICES += tplink_cpe210-v3
|
||||
|
||||
define Device/tplink_re350k-v1
|
||||
$(Device/tplink)
|
||||
ATH_SOC := qca9558
|
||||
|
||||
@ -196,6 +196,41 @@ static struct device_info boards[] = {
|
||||
.last_sysupgrade_partition = "support-list",
|
||||
},
|
||||
|
||||
/** Firmware layout for the CPE210 V3 */
|
||||
{
|
||||
.id = "CPE210V3",
|
||||
.vendor = "CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n",
|
||||
.support_list =
|
||||
"SupportList:\r\n"
|
||||
"CPE210(TP-LINK|EU|N300-2|45550000):3.0\r\n"
|
||||
"CPE210(TP-LINK|UN|N300-2|00000000):3.0\r\n"
|
||||
"CPE210(TP-LINK|UN|N300-2):3.0\r\n"
|
||||
"CPE210(TP-LINK|EU|N300-2):3.0\r\n",
|
||||
.support_trail = '\xff',
|
||||
.soft_ver = NULL,
|
||||
|
||||
.partitions = {
|
||||
{"fs-uboot", 0x00000, 0x20000},
|
||||
{"partition-table", 0x20000, 0x01000},
|
||||
{"default-mac", 0x30000, 0x00020},
|
||||
{"product-info", 0x31100, 0x00100},
|
||||
{"device-info", 0x31400, 0x00400},
|
||||
{"signature", 0x32000, 0x00400},
|
||||
{"device-id", 0x33000, 0x00100},
|
||||
{"firmware", 0x40000, 0x770000},
|
||||
{"soft-version", 0x7b0000, 0x00100},
|
||||
{"support-list", 0x7b1000, 0x01000},
|
||||
{"user-config", 0x7c0000, 0x10000},
|
||||
{"default-config", 0x7d0000, 0x10000},
|
||||
{"log", 0x7e0000, 0x10000},
|
||||
{"radio", 0x7f0000, 0x10000},
|
||||
{NULL, 0, 0}
|
||||
},
|
||||
|
||||
.first_sysupgrade_partition = "os-image",
|
||||
.last_sysupgrade_partition = "support-list",
|
||||
},
|
||||
|
||||
/** Firmware layout for the CPE510/520 */
|
||||
{
|
||||
.id = "CPE510",
|
||||
|
||||
Loading…
Reference in New Issue
Block a user