mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
ar71xx: remove 2.6.32 support
SVN-Revision: 26211
This commit is contained in:
parent
334ea34d35
commit
5c0daa4580
target/linux/ar71xx
config-2.6.32
patches-2.6.32
001-ar71xx_core.patch002-ar71xx_pci.patch003-ar71xx_usb_host.patch004-ar71xx_spi_controller.patch005-ar71xx_mac_driver.patch006-ar71xx_wdt_driver.patch007-ar91xx_flash_driver.patch101-ksz8041_phy_driver.patch102-mtd_m25p80_add_myloader_parser.patch104-mtd_m25p80_add_redboot_parser.patch107-mtd-SST39VF6401B-support.patch108-mtd_fix_cfi_cmdset_0002_status_check.patch109-mtd-wrt160nl-trx-parser.patch110-usb-ehci-add-war-for-synopsys-hc-bug.patch111-mtd-cfi_cmdset_0002-force-word-write.patch120-dsa-trailer-tag-validation-fix.patch121-dsa-add-88e6063-driver.patch140-redboot_partition_scan.patch150-drivers-link-spi-before-mtd.patch151-spi-add-various-flags.patch152-rb4xx-spi-driver.patch153-spi-rb4xx-cpld-driver.patch200-rb4xx_nand_driver.patch201-ap83_spi_controller.patch202-spi_vsc7385_driver.patch203-pb44_spi_controller.patch205-wndr3700-usb-led-driver.patch206-nxp-74hc153-gpio-chip-driver.patch207-rb750-led-driver.patch208-rb750-nand-driver.patch300-mips_fw_myloader.patch901-get_c0_compare_irq_function.patch990-backport.patch
@ -1,247 +0,0 @@
|
||||
CONFIG_32BIT=y
|
||||
# CONFIG_64BIT is not set
|
||||
CONFIG_AG71XX=y
|
||||
CONFIG_AG71XX_AR8216_SUPPORT=y
|
||||
# CONFIG_AG71XX_DEBUG is not set
|
||||
# CONFIG_AG71XX_DEBUG_FS is not set
|
||||
# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
|
||||
# CONFIG_AR7 is not set
|
||||
CONFIG_AR71XX_DEV_AP91_PCI=y
|
||||
CONFIG_AR71XX_DEV_AP94_PCI=y
|
||||
CONFIG_AR71XX_DEV_AR913X_WMAC=y
|
||||
CONFIG_AR71XX_DEV_DSA=y
|
||||
CONFIG_AR71XX_DEV_GPIO_BUTTONS=y
|
||||
CONFIG_AR71XX_DEV_LEDS_GPIO=y
|
||||
CONFIG_AR71XX_DEV_M25P80=y
|
||||
CONFIG_AR71XX_DEV_PB42_PCI=y
|
||||
CONFIG_AR71XX_DEV_PB9X_PCI=y
|
||||
CONFIG_AR71XX_DEV_USB=y
|
||||
CONFIG_AR71XX_MACH_AP81=y
|
||||
CONFIG_AR71XX_MACH_AP83=y
|
||||
CONFIG_AR71XX_MACH_AP96=y
|
||||
CONFIG_AR71XX_MACH_AW_NR580=y
|
||||
CONFIG_AR71XX_MACH_DIR_600_A1=y
|
||||
CONFIG_AR71XX_MACH_DIR_615_C1=y
|
||||
CONFIG_AR71XX_MACH_DIR_825_B1=y
|
||||
CONFIG_AR71XX_MACH_EAP7660D=y
|
||||
CONFIG_AR71XX_MACH_JA76PF=y
|
||||
CONFIG_AR71XX_MACH_JWAP003=y
|
||||
CONFIG_AR71XX_MACH_MZK_W04NU=y
|
||||
CONFIG_AR71XX_MACH_MZK_W300NH=y
|
||||
CONFIG_AR71XX_MACH_NBG460N=y
|
||||
CONFIG_AR71XX_MACH_PB42=y
|
||||
CONFIG_AR71XX_MACH_PB44=y
|
||||
CONFIG_AR71XX_MACH_PB92=y
|
||||
CONFIG_AR71XX_MACH_RB4XX=y
|
||||
CONFIG_AR71XX_MACH_RB750=y
|
||||
CONFIG_AR71XX_MACH_TEW_632BRP=y
|
||||
CONFIG_AR71XX_MACH_TL_MR3X20=y
|
||||
CONFIG_AR71XX_MACH_TL_WA901ND=y
|
||||
CONFIG_AR71XX_MACH_TL_WA901ND_V2=y
|
||||
CONFIG_AR71XX_MACH_TL_WR1043ND=y
|
||||
CONFIG_AR71XX_MACH_TL_WR741ND=y
|
||||
CONFIG_AR71XX_MACH_TL_WR841N_V1=y
|
||||
CONFIG_AR71XX_MACH_TL_WR941ND=y
|
||||
CONFIG_AR71XX_MACH_UBNT=y
|
||||
CONFIG_AR71XX_MACH_WNDR3700=y
|
||||
CONFIG_AR71XX_MACH_WNR2000=y
|
||||
CONFIG_AR71XX_MACH_WP543=y
|
||||
CONFIG_AR71XX_MACH_WRT160NL=y
|
||||
CONFIG_AR71XX_MACH_WRT400N=y
|
||||
CONFIG_AR71XX_MACH_WZR_HP_G300NH=y
|
||||
CONFIG_AR71XX_MACH_ZCN_1523H=y
|
||||
CONFIG_AR71XX_NVRAM=y
|
||||
CONFIG_AR71XX_PCI_ATH9K_FIXUP=y
|
||||
CONFIG_AR71XX_WDT=y
|
||||
CONFIG_AR8216_PHY=y
|
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
CONFIG_ARCH_SUPPORTS_OPROFILE=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
CONFIG_ATHEROS_AR71XX=y
|
||||
# CONFIG_BCM47XX is not set
|
||||
# CONFIG_BCM63XX is not set
|
||||
CONFIG_BITREVERSE=y
|
||||
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
|
||||
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_CEVT_R4K=y
|
||||
CONFIG_CEVT_R4K_LIB=y
|
||||
CONFIG_CFG80211_DEFAULT_PS_VALUE=0
|
||||
CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200"
|
||||
CONFIG_CPU_BIG_ENDIAN=y
|
||||
# CONFIG_CPU_CAVIUM_OCTEON is not set
|
||||
CONFIG_CPU_HAS_PREFETCH=y
|
||||
CONFIG_CPU_HAS_SYNC=y
|
||||
# CONFIG_CPU_LITTLE_ENDIAN is not set
|
||||
# CONFIG_CPU_LOONGSON2E is not set
|
||||
CONFIG_CPU_MIPS32=y
|
||||
# CONFIG_CPU_MIPS32_R1 is not set
|
||||
CONFIG_CPU_MIPS32_R2=y
|
||||
# CONFIG_CPU_MIPS64_R1 is not set
|
||||
# CONFIG_CPU_MIPS64_R2 is not set
|
||||
CONFIG_CPU_MIPSR2=y
|
||||
# CONFIG_CPU_NEVADA is not set
|
||||
# CONFIG_CPU_R10000 is not set
|
||||
# CONFIG_CPU_R3000 is not set
|
||||
# CONFIG_CPU_R4300 is not set
|
||||
# CONFIG_CPU_R4X00 is not set
|
||||
# CONFIG_CPU_R5000 is not set
|
||||
# CONFIG_CPU_R5432 is not set
|
||||
# CONFIG_CPU_R5500 is not set
|
||||
# CONFIG_CPU_R6000 is not set
|
||||
# CONFIG_CPU_R8000 is not set
|
||||
# CONFIG_CPU_RM7000 is not set
|
||||
# CONFIG_CPU_RM9000 is not set
|
||||
# CONFIG_CPU_SB1 is not set
|
||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
||||
# CONFIG_CPU_TX39XX is not set
|
||||
# CONFIG_CPU_TX49XX is not set
|
||||
# CONFIG_CPU_VR41XX is not set
|
||||
CONFIG_CSRC_R4K=y
|
||||
CONFIG_CSRC_R4K_LIB=y
|
||||
CONFIG_DECOMPRESS_LZMA=y
|
||||
CONFIG_DEVPORT=y
|
||||
# CONFIG_DM9000 is not set
|
||||
CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
||||
CONFIG_DMA_NONCOHERENT=y
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
# CONFIG_FSNOTIFY is not set
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
CONFIG_GENERIC_CMOS_UPDATE=y
|
||||
CONFIG_GENERIC_FIND_LAST_BIT=y
|
||||
CONFIG_GENERIC_FIND_NEXT_BIT=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_NXP_74HC153=y
|
||||
CONFIG_GPIO_PCF857X=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_HARDWARE_WATCHPOINTS=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HW_HAS_PCI=y
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_ALGOBIT=y
|
||||
CONFIG_I2C_BOARDINFO=y
|
||||
CONFIG_I2C_GPIO=y
|
||||
CONFIG_IMAGE_CMDLINE_HACK=y
|
||||
# CONFIG_INITRAMFS_COMPRESSION_LZO is not set
|
||||
CONFIG_INITRAMFS_ROOT_GID=0
|
||||
CONFIG_INITRAMFS_ROOT_UID=0
|
||||
CONFIG_INITRAMFS_SOURCE="../../root"
|
||||
CONFIG_IRQ_CPU=y
|
||||
# CONFIG_LEDS_GPIO is not set
|
||||
# CONFIG_LEDS_RB750 is not set
|
||||
# CONFIG_LEDS_WNDR3700_USB is not set
|
||||
# CONFIG_M25PXX_USE_FAST_READ is not set
|
||||
# CONFIG_MACH_ALCHEMY is not set
|
||||
# CONFIG_MACH_DECSTATION is not set
|
||||
# CONFIG_MACH_JAZZ is not set
|
||||
# CONFIG_MACH_LOONGSON is not set
|
||||
# CONFIG_MACH_TX39XX is not set
|
||||
# CONFIG_MACH_TX49XX is not set
|
||||
# CONFIG_MACH_VR41XX is not set
|
||||
CONFIG_MICREL_PHY=y
|
||||
# CONFIG_MIKROTIK_RB532 is not set
|
||||
CONFIG_MIPS=y
|
||||
# CONFIG_MIPS_COBALT is not set
|
||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
||||
CONFIG_MIPS_MACHINE=y
|
||||
# CONFIG_MIPS_MALTA is not set
|
||||
CONFIG_MIPS_MT_DISABLED=y
|
||||
# CONFIG_MIPS_MT_SMP is not set
|
||||
# CONFIG_MIPS_MT_SMTC is not set
|
||||
# CONFIG_MIPS_SIM is not set
|
||||
CONFIG_MTD_AR91XX_FLASH=y
|
||||
# CONFIG_MTD_CFI_INTELEXT is not set
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_JEDECPROBE=y
|
||||
CONFIG_MTD_M25P80=y
|
||||
CONFIG_MTD_MYLOADER_PARTS=y
|
||||
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
|
||||
CONFIG_MTD_REDBOOT_PARTS=y
|
||||
CONFIG_MTD_WRT160NL_PARTS=y
|
||||
CONFIG_MYLOADER=y
|
||||
CONFIG_NET_DSA=y
|
||||
CONFIG_NET_DSA_MV88E6060=y
|
||||
CONFIG_NET_DSA_MV88E6063=y
|
||||
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
|
||||
# CONFIG_NET_DSA_MV88E6131 is not set
|
||||
# CONFIG_NET_DSA_MV88E6XXX is not set
|
||||
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
|
||||
# CONFIG_NET_DSA_TAG_DSA is not set
|
||||
# CONFIG_NET_DSA_TAG_EDSA is not set
|
||||
CONFIG_NET_DSA_TAG_TRAILER=y
|
||||
# CONFIG_NO_IOPORT is not set
|
||||
# CONFIG_NXP_STB220 is not set
|
||||
# CONFIG_NXP_STB225 is not set
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_MARVELL_PHY=y
|
||||
# CONFIG_PMC_MSP is not set
|
||||
# CONFIG_PMC_YOSEMITE is not set
|
||||
# CONFIG_PNX8550_JBS is not set
|
||||
# CONFIG_PNX8550_STB810 is not set
|
||||
CONFIG_RTL8306_PHY=y
|
||||
CONFIG_RTL8366RB_PHY=y
|
||||
CONFIG_RTL8366S_PHY=y
|
||||
CONFIG_RTL8366_SMI=y
|
||||
CONFIG_SCHED_OMIT_FRAME_POINTER=y
|
||||
# CONFIG_SCSI_DMA is not set
|
||||
# CONFIG_SERIAL_8250_EXTENDED is not set
|
||||
CONFIG_SERIAL_8250_NR_UARTS=1
|
||||
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
|
||||
# CONFIG_SGI_IP22 is not set
|
||||
# CONFIG_SGI_IP27 is not set
|
||||
# CONFIG_SGI_IP28 is not set
|
||||
# CONFIG_SGI_IP32 is not set
|
||||
# CONFIG_SIBYTE_BIGSUR is not set
|
||||
# CONFIG_SIBYTE_CARMEL is not set
|
||||
# CONFIG_SIBYTE_CRHINE is not set
|
||||
# CONFIG_SIBYTE_CRHONE is not set
|
||||
# CONFIG_SIBYTE_LITTLESUR is not set
|
||||
# CONFIG_SIBYTE_RHONE is not set
|
||||
# CONFIG_SIBYTE_SENTOSA is not set
|
||||
# CONFIG_SIBYTE_SWARM is not set
|
||||
# CONFIG_SLAB is not set
|
||||
CONFIG_SLUB=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_AP83=y
|
||||
CONFIG_SPI_AR71XX=y
|
||||
CONFIG_SPI_BITBANG=y
|
||||
CONFIG_SPI_GPIO=y
|
||||
CONFIG_SPI_MASTER=y
|
||||
CONFIG_SPI_PB44=y
|
||||
# CONFIG_SPI_RB4XX is not set
|
||||
# CONFIG_SPI_RB4XX_CPLD is not set
|
||||
# CONFIG_SPI_SPIDEV is not set
|
||||
# CONFIG_SPI_VSC7385 is not set
|
||||
CONFIG_SWCONFIG=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
|
||||
CONFIG_SYS_HAS_EARLY_PRINTK=y
|
||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
|
||||
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
|
||||
# CONFIG_TC35815 is not set
|
||||
CONFIG_TRAD_SIGNALS=y
|
||||
# CONFIG_TREE_PREEMPT_RCU is not set
|
||||
CONFIG_TREE_RCU=y
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
@ -1,50 +0,0 @@
|
||||
--- a/arch/mips/Makefile
|
||||
+++ b/arch/mips/Makefile
|
||||
@@ -156,6 +156,13 @@ ifeq (,$(findstring march=octeon, $(cfla
|
||||
cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon
|
||||
endif
|
||||
|
||||
+#
|
||||
+# Atheros AR71xx
|
||||
+#
|
||||
+core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/
|
||||
+cflags-$(CONFIG_ATHEROS_AR71XX) += -I$(srctree)/arch/mips/include/asm/mach-ar71xx
|
||||
+load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000
|
||||
+
|
||||
cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,)
|
||||
cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,)
|
||||
cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,)
|
||||
--- a/arch/mips/Kconfig
|
||||
+++ b/arch/mips/Kconfig
|
||||
@@ -43,6 +43,23 @@ config AR7
|
||||
Support for the Texas Instruments AR7 System-on-a-Chip
|
||||
family: TNETD7100, 7200 and 7300.
|
||||
|
||||
+config ATHEROS_AR71XX
|
||||
+ bool "Atheros AR71xx based boards"
|
||||
+ select CEVT_R4K
|
||||
+ select CSRC_R4K
|
||||
+ select DMA_NONCOHERENT
|
||||
+ select HW_HAS_PCI
|
||||
+ select IRQ_CPU
|
||||
+ select ARCH_REQUIRE_GPIOLIB
|
||||
+ select SYS_HAS_CPU_MIPS32_R1
|
||||
+ select SYS_HAS_CPU_MIPS32_R2
|
||||
+ select SYS_SUPPORTS_32BIT_KERNEL
|
||||
+ select SYS_SUPPORTS_BIG_ENDIAN
|
||||
+ select SYS_HAS_EARLY_PRINTK
|
||||
+ select MIPS_MACHINE
|
||||
+ help
|
||||
+ Support for Atheros AR71xx based boards.
|
||||
+
|
||||
config BASLER_EXCITE
|
||||
bool "Basler eXcite smart camera"
|
||||
select CEVT_R4K
|
||||
@@ -674,6 +691,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
|
||||
endchoice
|
||||
|
||||
source "arch/mips/alchemy/Kconfig"
|
||||
+source "arch/mips/ar71xx/Kconfig"
|
||||
source "arch/mips/basler/excite/Kconfig"
|
||||
source "arch/mips/bcm63xx/Kconfig"
|
||||
source "arch/mips/jazz/Kconfig"
|
@ -1,10 +0,0 @@
|
||||
--- a/arch/mips/pci/Makefile
|
||||
+++ b/arch/mips/pci/Makefile
|
||||
@@ -18,6 +18,7 @@ obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o
|
||||
obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
|
||||
obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
|
||||
ops-bcm63xx.o
|
||||
+obj-$(CONFIG_ATHEROS_AR71XX) += pci-ar71xx.o pci-ar724x.o
|
||||
|
||||
#
|
||||
# These are still pretty much in the old state, watch, go blind.
|
@ -1,58 +0,0 @@
|
||||
--- a/drivers/usb/host/Kconfig
|
||||
+++ b/drivers/usb/host/Kconfig
|
||||
@@ -98,6 +98,13 @@ config USB_EHCI_BIG_ENDIAN_DESC
|
||||
depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX)
|
||||
default y
|
||||
|
||||
+config USB_EHCI_AR71XX
|
||||
+ bool "USB EHCI support for AR71xx"
|
||||
+ depends on USB_EHCI_HCD && ATHEROS_AR71XX
|
||||
+ default y
|
||||
+ help
|
||||
+ Support for Atheros AR71xx built-in EHCI controller
|
||||
+
|
||||
config USB_EHCI_FSL
|
||||
bool "Support for Freescale on-chip EHCI USB controller"
|
||||
depends on USB_EHCI_HCD && FSL_SOC
|
||||
@@ -189,6 +196,13 @@ config USB_OHCI_HCD
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called ohci-hcd.
|
||||
|
||||
+config USB_OHCI_AR71XX
|
||||
+ bool "USB OHCI support for Atheros AR71xx"
|
||||
+ depends on USB_OHCI_HCD && ATHEROS_AR71XX
|
||||
+ default y
|
||||
+ help
|
||||
+ Support for Atheros AR71xx built-in OHCI controller
|
||||
+
|
||||
config USB_OHCI_HCD_PPC_SOC
|
||||
bool "OHCI support for on-chip PPC USB controller"
|
||||
depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
|
||||
--- a/drivers/usb/host/ehci-hcd.c
|
||||
+++ b/drivers/usb/host/ehci-hcd.c
|
||||
@@ -1142,6 +1142,11 @@ MODULE_LICENSE ("GPL");
|
||||
#define PLATFORM_DRIVER ehci_atmel_driver
|
||||
#endif
|
||||
|
||||
+#ifdef CONFIG_USB_EHCI_AR71XX
|
||||
+#include "ehci-ar71xx.c"
|
||||
+#define PLATFORM_DRIVER ehci_ar71xx_driver
|
||||
+#endif
|
||||
+
|
||||
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
|
||||
!defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
|
||||
#error "missing bus glue for ehci-hcd"
|
||||
--- a/drivers/usb/host/ohci-hcd.c
|
||||
+++ b/drivers/usb/host/ohci-hcd.c
|
||||
@@ -1085,6 +1085,11 @@ MODULE_LICENSE ("GPL");
|
||||
#define TMIO_OHCI_DRIVER ohci_hcd_tmio_driver
|
||||
#endif
|
||||
|
||||
+#ifdef CONFIG_USB_OHCI_AR71XX
|
||||
+#include "ohci-ar71xx.c"
|
||||
+#define PLATFORM_DRIVER ohci_hcd_ar71xx_driver
|
||||
+#endif
|
||||
+
|
||||
#if !defined(PCI_DRIVER) && \
|
||||
!defined(PLATFORM_DRIVER) && \
|
||||
!defined(OF_PLATFORM_DRIVER) && \
|
@ -1,26 +0,0 @@
|
||||
--- a/drivers/spi/Kconfig
|
||||
+++ b/drivers/spi/Kconfig
|
||||
@@ -53,6 +53,13 @@ if SPI_MASTER
|
||||
|
||||
comment "SPI Master Controller Drivers"
|
||||
|
||||
+config SPI_AR71XX
|
||||
+ tristate "Atheros AR71xx SPI Controller"
|
||||
+ depends on SPI_MASTER && ATHEROS_AR71XX
|
||||
+ select SPI_BITBANG
|
||||
+ help
|
||||
+ This is the SPI contoller driver for Atheros AR71xx.
|
||||
+
|
||||
config SPI_ATMEL
|
||||
tristate "Atmel SPI Controller"
|
||||
depends on (ARCH_AT91 || AVR32)
|
||||
--- a/drivers/spi/Makefile
|
||||
+++ b/drivers/spi/Makefile
|
||||
@@ -11,6 +11,7 @@ endif
|
||||
obj-$(CONFIG_SPI_MASTER) += spi.o
|
||||
|
||||
# SPI master controller drivers (bus)
|
||||
+obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o
|
||||
obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
|
||||
obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
|
||||
obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
|
@ -1,21 +0,0 @@
|
||||
--- a/drivers/net/Kconfig
|
||||
+++ b/drivers/net/Kconfig
|
||||
@@ -2126,6 +2126,8 @@ config ACENIC_OMIT_TIGON_I
|
||||
|
||||
The safe and default value for this is N.
|
||||
|
||||
+source drivers/net/ag71xx/Kconfig
|
||||
+
|
||||
config DL2K
|
||||
tristate "DL2000/TC902x-based Gigabit Ethernet support"
|
||||
depends on PCI
|
||||
--- a/drivers/net/Makefile
|
||||
+++ b/drivers/net/Makefile
|
||||
@@ -106,6 +106,7 @@ obj-$(CONFIG_STMMAC_ETH) += stmmac/
|
||||
# end link order section
|
||||
#
|
||||
|
||||
+obj-$(CONFIG_AG71XX) += ag71xx/
|
||||
obj-$(CONFIG_SUNDANCE) += sundance.o
|
||||
obj-$(CONFIG_HAMACHI) += hamachi.o
|
||||
obj-$(CONFIG_NET) += Space.o loopback.o
|
@ -1,26 +0,0 @@
|
||||
--- a/drivers/watchdog/Kconfig
|
||||
+++ b/drivers/watchdog/Kconfig
|
||||
@@ -850,6 +850,13 @@ config TXX9_WDT
|
||||
help
|
||||
Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
|
||||
|
||||
+config AR71XX_WDT
|
||||
+ tristate "Atheros AR71xx Watchdog Timer"
|
||||
+ depends on ATHEROS_AR71XX
|
||||
+ help
|
||||
+ Hardware driver for the built-in watchdog timer on the Atheros
|
||||
+ AR71xx SoCs.
|
||||
+
|
||||
# PARISC Architecture
|
||||
|
||||
# POWERPC Architecture
|
||||
--- a/drivers/watchdog/Makefile
|
||||
+++ b/drivers/watchdog/Makefile
|
||||
@@ -113,6 +113,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
|
||||
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
|
||||
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
|
||||
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
|
||||
+obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o
|
||||
|
||||
# PARISC Architecture
|
||||
|
@ -1,26 +0,0 @@
|
||||
--- a/drivers/mtd/maps/Kconfig
|
||||
+++ b/drivers/mtd/maps/Kconfig
|
||||
@@ -259,6 +259,13 @@ config MTD_ALCHEMY
|
||||
help
|
||||
Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
|
||||
|
||||
+config MTD_AR91XX_FLASH
|
||||
+ tristate "Atheros AR91xx parallel flash support"
|
||||
+ depends on ATHEROS_AR71XX
|
||||
+ select MTD_COMPLEX_MAPPINGS
|
||||
+ help
|
||||
+ Parallel flash driver for the Atheros AR91xx based boards.
|
||||
+
|
||||
config MTD_DILNETPC
|
||||
tristate "CFI Flash device mapped on DIL/Net PC"
|
||||
depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
|
||||
--- a/drivers/mtd/maps/Makefile
|
||||
+++ b/drivers/mtd/maps/Makefile
|
||||
@@ -41,6 +41,7 @@ obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.
|
||||
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
|
||||
obj-$(CONFIG_MTD_PCI) += pci.o
|
||||
obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
|
||||
+obj-$(CONFIG_MTD_AR91XX_FLASH) += ar91xx_flash.o
|
||||
obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
|
||||
obj-$(CONFIG_MTD_EDB7312) += edb7312.o
|
||||
obj-$(CONFIG_MTD_IMPA7) += impa7.o
|
@ -1,24 +0,0 @@
|
||||
--- a/drivers/net/phy/Kconfig
|
||||
+++ b/drivers/net/phy/Kconfig
|
||||
@@ -114,6 +114,11 @@ config RTL8306_PHY
|
||||
tristate "Driver for Realtek RTL8306S switches"
|
||||
select SWCONFIG
|
||||
|
||||
+config MICREL_PHY
|
||||
+ tristate "Drivers for Micrel/Kendin PHYs"
|
||||
+ ---help---
|
||||
+ Currently has a driver for the KSZ8041
|
||||
+
|
||||
config FIXED_PHY
|
||||
bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
|
||||
depends on PHYLIB=y
|
||||
--- a/drivers/net/phy/Makefile
|
||||
+++ b/drivers/net/phy/Makefile
|
||||
@@ -24,6 +24,7 @@ obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi
|
||||
obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o
|
||||
obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o
|
||||
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
|
||||
+obj-$(CONFIG_MICREL_PHY) += micrel.o
|
||||
obj-$(CONFIG_FIXED_PHY) += fixed.o
|
||||
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
|
||||
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
|
@ -1,19 +0,0 @@
|
||||
--- a/drivers/mtd/devices/m25p80.c
|
||||
+++ b/drivers/mtd/devices/m25p80.c
|
||||
@@ -873,6 +873,16 @@ static int __devinit m25p_probe(struct s
|
||||
part_probes, &parts, 0);
|
||||
}
|
||||
|
||||
+#ifdef CONFIG_MTD_MYLOADER_PARTS
|
||||
+ if (nr_parts <= 0) {
|
||||
+ static const char *part_probes[]
|
||||
+ = { "MyLoader", NULL, };
|
||||
+
|
||||
+ nr_parts = parse_mtd_partitions(&flash->mtd,
|
||||
+ part_probes, &parts, 0);
|
||||
+ }
|
||||
+#endif
|
||||
+
|
||||
if (nr_parts <= 0 && data && data->parts) {
|
||||
parts = data->parts;
|
||||
nr_parts = data->nr_parts;
|
@ -1,18 +0,0 @@
|
||||
--- a/drivers/mtd/devices/m25p80.c
|
||||
+++ b/drivers/mtd/devices/m25p80.c
|
||||
@@ -883,6 +883,15 @@ static int __devinit m25p_probe(struct s
|
||||
}
|
||||
#endif
|
||||
|
||||
+#ifdef CONFIG_MTD_REDBOOT_PARTS
|
||||
+ if (nr_parts <= 0) {
|
||||
+ static const char *part_probes[]
|
||||
+ = { "RedBoot", NULL, };
|
||||
+
|
||||
+ nr_parts = parse_mtd_partitions(&flash->mtd,
|
||||
+ part_probes, &parts, 0);
|
||||
+ }
|
||||
+#endif
|
||||
if (nr_parts <= 0 && data && data->parts) {
|
||||
parts = data->parts;
|
||||
nr_parts = data->nr_parts;
|
@ -1,29 +0,0 @@
|
||||
--- a/drivers/mtd/chips/jedec_probe.c
|
||||
+++ b/drivers/mtd/chips/jedec_probe.c
|
||||
@@ -166,6 +166,7 @@
|
||||
#define SST39LF160 0x2782
|
||||
#define SST39VF1601 0x234b
|
||||
#define SST39VF3201 0x235b
|
||||
+#define SST39VF6401B 0x236d
|
||||
#define SST39LF512 0x00D4
|
||||
#define SST39LF010 0x00D5
|
||||
#define SST39LF020 0x00D6
|
||||
@@ -1556,6 +1557,18 @@ static const struct amd_flash_info jedec
|
||||
ERASEINFO(0x10000,64),
|
||||
}
|
||||
}, {
|
||||
+ .mfr_id = MANUFACTURER_SST,
|
||||
+ .dev_id = SST39VF6401B,
|
||||
+ .name = "SST 39VF6401B",
|
||||
+ .devtypes = CFI_DEVICETYPE_X16,
|
||||
+ .uaddr = MTD_UADDR_0xAAAA_0x5555,
|
||||
+ .dev_size = SIZE_8MiB,
|
||||
+ .cmd_set = P_ID_AMD_STD,
|
||||
+ .nr_regions = 1,
|
||||
+ .regions = {
|
||||
+ ERASEINFO(0x10000,128)
|
||||
+ }
|
||||
+ }, {
|
||||
.mfr_id = MANUFACTURER_ST,
|
||||
.dev_id = M29F800AB,
|
||||
.name = "ST M29F800AB",
|
@ -1,69 +0,0 @@
|
||||
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
@@ -1169,8 +1169,8 @@ static int __xipram do_write_oneword(str
|
||||
break;
|
||||
}
|
||||
|
||||
- if (chip_ready(map, adr))
|
||||
- break;
|
||||
+ if (chip_good(map, adr, datum))
|
||||
+ goto enable_xip;
|
||||
|
||||
/* Latency issues. Drop the lock, wait a while and retry */
|
||||
UDELAY(map, chip, adr, 1);
|
||||
@@ -1186,6 +1186,8 @@ static int __xipram do_write_oneword(str
|
||||
|
||||
ret = -EIO;
|
||||
}
|
||||
+
|
||||
+ enable_xip:
|
||||
xip_enable(map, chip, adr);
|
||||
op_done:
|
||||
chip->state = FL_READY;
|
||||
@@ -1532,7 +1534,6 @@ static int cfi_amdstd_write_buffers(stru
|
||||
return 0;
|
||||
}
|
||||
|
||||
-
|
||||
/*
|
||||
* Handle devices with one erase region, that only implement
|
||||
* the chip erase command.
|
||||
@@ -1596,8 +1597,8 @@ static int __xipram do_erase_chip(struct
|
||||
chip->erase_suspended = 0;
|
||||
}
|
||||
|
||||
- if (chip_ready(map, adr))
|
||||
- break;
|
||||
+ if (chip_good(map, adr, map_word_ff(map)))
|
||||
+ goto op_done;
|
||||
|
||||
if (time_after(jiffies, timeo)) {
|
||||
printk(KERN_WARNING "MTD %s(): software timeout\n",
|
||||
@@ -1617,6 +1618,7 @@ static int __xipram do_erase_chip(struct
|
||||
ret = -EIO;
|
||||
}
|
||||
|
||||
+ op_done:
|
||||
chip->state = FL_READY;
|
||||
xip_enable(map, chip, adr);
|
||||
put_chip(map, chip, adr);
|
||||
@@ -1684,9 +1686,9 @@ static int __xipram do_erase_oneblock(st
|
||||
chip->erase_suspended = 0;
|
||||
}
|
||||
|
||||
- if (chip_ready(map, adr)) {
|
||||
+ if (chip_good(map, adr, map_word_ff(map))) {
|
||||
xip_enable(map, chip, adr);
|
||||
- break;
|
||||
+ goto op_done;
|
||||
}
|
||||
|
||||
if (time_after(jiffies, timeo)) {
|
||||
@@ -1708,6 +1710,7 @@ static int __xipram do_erase_oneblock(st
|
||||
ret = -EIO;
|
||||
}
|
||||
|
||||
+ op_done:
|
||||
chip->state = FL_READY;
|
||||
put_chip(map, chip, adr);
|
||||
spin_unlock(chip->mutex);
|
@ -1,44 +0,0 @@
|
||||
--- a/drivers/mtd/devices/m25p80.c
|
||||
+++ b/drivers/mtd/devices/m25p80.c
|
||||
@@ -892,6 +892,16 @@ static int __devinit m25p_probe(struct s
|
||||
part_probes, &parts, 0);
|
||||
}
|
||||
#endif
|
||||
+
|
||||
+#ifdef CONFIG_MTD_WRT160NL_PARTS
|
||||
+ if (nr_parts <= 0) {
|
||||
+ static const char *part_probes[]
|
||||
+ = { "wrt160nl", NULL, };
|
||||
+
|
||||
+ nr_parts = parse_mtd_partitions(&flash->mtd,
|
||||
+ part_probes, &parts, 0);
|
||||
+ }
|
||||
+#endif
|
||||
if (nr_parts <= 0 && data && data->parts) {
|
||||
parts = data->parts;
|
||||
nr_parts = data->nr_parts;
|
||||
--- a/drivers/mtd/Kconfig
|
||||
+++ b/drivers/mtd/Kconfig
|
||||
@@ -181,6 +181,12 @@ config MTD_AR7_PARTS
|
||||
---help---
|
||||
TI AR7 partitioning support
|
||||
|
||||
+config MTD_WRT160NL_PARTS
|
||||
+ tristate "Linksys WRT160NL partitioning support"
|
||||
+ depends on MTD_PARTITIONS && AR71XX_MACH_WRT160NL
|
||||
+ ---help---
|
||||
+ Linksys WRT160NL partitioning support
|
||||
+
|
||||
config MTD_MYLOADER_PARTS
|
||||
tristate "MyLoader partition parsing"
|
||||
depends on MTD_PARTITIONS && (ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX)
|
||||
--- a/drivers/mtd/Makefile
|
||||
+++ b/drivers/mtd/Makefile
|
||||
@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
|
||||
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
|
||||
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
|
||||
obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
|
||||
+obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
|
||||
obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
|
||||
obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
|
||||
|
@ -1,22 +0,0 @@
|
||||
--- a/drivers/usb/host/ehci-q.c
|
||||
+++ b/drivers/usb/host/ehci-q.c
|
||||
@@ -1172,6 +1172,9 @@ static void end_unlink_async (struct ehc
|
||||
ehci->reclaim = NULL;
|
||||
start_unlink_async (ehci, next);
|
||||
}
|
||||
+
|
||||
+ if (ehci->has_synopsys_hc_bug)
|
||||
+ writel((u32)ehci->async->qh_dma, &ehci->regs->async_next);
|
||||
}
|
||||
|
||||
/* makes sure the async qh will become idle */
|
||||
--- a/drivers/usb/host/ehci.h
|
||||
+++ b/drivers/usb/host/ehci.h
|
||||
@@ -131,6 +131,7 @@ struct ehci_hcd { /* one per controlle
|
||||
unsigned need_io_watchdog:1;
|
||||
unsigned broken_periodic:1;
|
||||
unsigned amd_l1_fix:1;
|
||||
+ unsigned has_synopsys_hc_bug:1; /* Synopsys HC */
|
||||
|
||||
/* required for usb32 quirk */
|
||||
#define OHCI_CTRL_HCFS (3 << 6)
|
@ -1,61 +0,0 @@
|
||||
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
|
||||
@@ -39,7 +39,7 @@
|
||||
#include <linux/mtd/xip.h>
|
||||
|
||||
#define AMD_BOOTLOC_BUG
|
||||
-#define FORCE_WORD_WRITE 0
|
||||
+#define FORCE_WORD_WRITE 1
|
||||
|
||||
#define MAX_WORD_RETRIES 3
|
||||
|
||||
@@ -54,7 +54,9 @@
|
||||
|
||||
static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
|
||||
static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
|
||||
+#if !FORCE_WORD_WRITE
|
||||
static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
|
||||
+#endif
|
||||
static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
|
||||
static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
|
||||
static void cfi_amdstd_sync (struct mtd_info *);
|
||||
@@ -189,6 +191,7 @@ static void fixup_amd_bootblock(struct m
|
||||
}
|
||||
#endif
|
||||
|
||||
+#if !FORCE_WORD_WRITE
|
||||
static void fixup_use_write_buffers(struct mtd_info *mtd, void *param)
|
||||
{
|
||||
struct map_info *map = mtd->priv;
|
||||
@@ -198,6 +201,7 @@ static void fixup_use_write_buffers(stru
|
||||
mtd->write = cfi_amdstd_write_buffers;
|
||||
}
|
||||
}
|
||||
+#endif /* !FORCE_WORD_WRITE */
|
||||
|
||||
/* Atmel chips don't use the same PRI format as AMD chips */
|
||||
static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
|
||||
@@ -1343,6 +1347,7 @@ static int cfi_amdstd_write_words(struct
|
||||
/*
|
||||
* FIXME: interleaved mode not tested, and probably not supported!
|
||||
*/
|
||||
+#if !FORCE_WORD_WRITE
|
||||
static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
|
||||
unsigned long adr, const u_char *buf,
|
||||
int len)
|
||||
@@ -1454,7 +1459,6 @@ static int __xipram do_write_buffer(stru
|
||||
return ret;
|
||||
}
|
||||
|
||||
-
|
||||
static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
|
||||
size_t *retlen, const u_char *buf)
|
||||
{
|
||||
@@ -1533,6 +1537,7 @@ static int cfi_amdstd_write_buffers(stru
|
||||
|
||||
return 0;
|
||||
}
|
||||
+#endif /* !FORCE_WORD_WRITE */
|
||||
|
||||
/*
|
||||
* Handle devices with one erase region, that only implement
|
@ -1,11 +0,0 @@
|
||||
--- a/net/dsa/tag_trailer.c
|
||||
+++ b/net/dsa/tag_trailer.c
|
||||
@@ -86,7 +86,7 @@ static int trailer_rcv(struct sk_buff *s
|
||||
|
||||
trailer = skb_tail_pointer(skb) - 4;
|
||||
if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 ||
|
||||
- (trailer[3] & 0xef) != 0x00 || trailer[3] != 0x00)
|
||||
+ (trailer[2] & 0xef) != 0x00 || (trailer[3] & 0xfe) != 0x00)
|
||||
goto out_drop;
|
||||
|
||||
source_port = trailer[1] & 7;
|
@ -1,26 +0,0 @@
|
||||
--- a/net/dsa/Kconfig
|
||||
+++ b/net/dsa/Kconfig
|
||||
@@ -36,6 +36,13 @@ config NET_DSA_MV88E6060
|
||||
This enables support for the Marvell 88E6060 ethernet switch
|
||||
chip.
|
||||
|
||||
+config NET_DSA_MV88E6063
|
||||
+ bool "Marvell 88E6063 ethernet switch chip support"
|
||||
+ select NET_DSA_TAG_TRAILER
|
||||
+ ---help---
|
||||
+ This enables support for the Marvell 88E6063 ethernet switch
|
||||
+ chip
|
||||
+
|
||||
config NET_DSA_MV88E6XXX_NEED_PPU
|
||||
bool
|
||||
default n
|
||||
--- a/net/dsa/Makefile
|
||||
+++ b/net/dsa/Makefile
|
||||
@@ -6,6 +6,7 @@ obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag
|
||||
# switch drivers
|
||||
obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
|
||||
obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
|
||||
+obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
|
||||
obj-$(CONFIG_NET_DSA_MV88E6123_61_65) += mv88e6123_61_65.o
|
||||
obj-$(CONFIG_NET_DSA_MV88E6131) += mv88e6131.o
|
||||
|
@ -1,54 +0,0 @@
|
||||
--- a/drivers/mtd/redboot.c
|
||||
+++ b/drivers/mtd/redboot.c
|
||||
@@ -60,31 +60,32 @@ static int parse_redboot_partitions(stru
|
||||
static char nullstring[] = "unallocated";
|
||||
#endif
|
||||
|
||||
+ buf = vmalloc(master->erasesize);
|
||||
+ if (!buf)
|
||||
+ return -ENOMEM;
|
||||
+
|
||||
+ restart:
|
||||
if ( directory < 0 ) {
|
||||
offset = master->size + directory * master->erasesize;
|
||||
- while (master->block_isbad &&
|
||||
+ while (master->block_isbad &&
|
||||
master->block_isbad(master, offset)) {
|
||||
if (!offset) {
|
||||
nogood:
|
||||
printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
|
||||
+ vfree(buf);
|
||||
return -EIO;
|
||||
}
|
||||
offset -= master->erasesize;
|
||||
}
|
||||
} else {
|
||||
offset = directory * master->erasesize;
|
||||
- while (master->block_isbad &&
|
||||
+ while (master->block_isbad &&
|
||||
master->block_isbad(master, offset)) {
|
||||
offset += master->erasesize;
|
||||
if (offset == master->size)
|
||||
goto nogood;
|
||||
}
|
||||
}
|
||||
- buf = vmalloc(master->erasesize);
|
||||
-
|
||||
- if (!buf)
|
||||
- return -ENOMEM;
|
||||
-
|
||||
printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
|
||||
master->name, offset);
|
||||
|
||||
@@ -156,6 +157,11 @@ static int parse_redboot_partitions(stru
|
||||
}
|
||||
if (i == numslots) {
|
||||
/* Didn't find it */
|
||||
+ if (offset + master->erasesize < master->size) {
|
||||
+ /* not at the end of the flash yet, maybe next block :) */
|
||||
+ directory++;
|
||||
+ goto restart;
|
||||
+ }
|
||||
printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
|
||||
master->name);
|
||||
ret = 0;
|
@ -1,12 +0,0 @@
|
||||
--- a/drivers/Makefile
|
||||
+++ b/drivers/Makefile
|
||||
@@ -44,8 +44,8 @@ obj-y += macintosh/
|
||||
obj-$(CONFIG_IDE) += ide/
|
||||
obj-$(CONFIG_SCSI) += scsi/
|
||||
obj-$(CONFIG_ATA) += ata/
|
||||
-obj-$(CONFIG_MTD) += mtd/
|
||||
obj-$(CONFIG_SPI) += spi/
|
||||
+obj-$(CONFIG_MTD) += mtd/
|
||||
obj-y += net/
|
||||
obj-$(CONFIG_ATM) += atm/
|
||||
obj-$(CONFIG_FUSION) += message/
|
@ -1,19 +0,0 @@
|
||||
--- a/include/linux/spi/spi.h
|
||||
+++ b/include/linux/spi/spi.h
|
||||
@@ -434,6 +434,8 @@ struct spi_transfer {
|
||||
dma_addr_t rx_dma;
|
||||
|
||||
unsigned cs_change:1;
|
||||
+ unsigned verify:1;
|
||||
+ unsigned fast_write:1;
|
||||
u8 bits_per_word;
|
||||
u16 delay_usecs;
|
||||
u32 speed_hz;
|
||||
@@ -475,6 +477,7 @@ struct spi_message {
|
||||
struct spi_device *spi;
|
||||
|
||||
unsigned is_dma_mapped:1;
|
||||
+ unsigned fast_read:1;
|
||||
|
||||
/* REVISIT: we might want a flag affecting the behavior of the
|
||||
* last transfer ... allowing things like "read 16 bit length L"
|
@ -1,25 +0,0 @@
|
||||
--- a/drivers/spi/Kconfig
|
||||
+++ b/drivers/spi/Kconfig
|
||||
@@ -214,6 +214,12 @@ config SPI_PXA2XX
|
||||
The driver can be configured to use any SSP port and additional
|
||||
documentation can be found a Documentation/spi/pxa2xx.
|
||||
|
||||
+config SPI_RB4XX
|
||||
+ tristate "Mikrotik RB4XX SPI master"
|
||||
+ depends on SPI_MASTER && AR71XX_MACH_RB4XX
|
||||
+ help
|
||||
+ SPI controller driver for the Mikrotik RB4xx series boards.
|
||||
+
|
||||
config SPI_S3C24XX
|
||||
tristate "Samsung S3C24XX series SPI"
|
||||
depends on ARCH_S3C2410 && EXPERIMENTAL
|
||||
--- a/drivers/spi/Makefile
|
||||
+++ b/drivers/spi/Makefile
|
||||
@@ -33,6 +33,7 @@ obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s
|
||||
obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
|
||||
obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
|
||||
obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
|
||||
+obj-$(CONFIG_SPI_RB4XX) += rb4xx_spi.o
|
||||
obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o
|
||||
obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o
|
||||
# ... add above this line ...
|
@ -1,26 +0,0 @@
|
||||
--- a/drivers/spi/Kconfig
|
||||
+++ b/drivers/spi/Kconfig
|
||||
@@ -294,6 +294,13 @@ config SPI_TLE62X0
|
||||
sysfs interface, with each line presented as a kind of GPIO
|
||||
exposing both switch control and diagnostic feedback.
|
||||
|
||||
+config SPI_RB4XX_CPLD
|
||||
+ tristate "MikroTik RB4XX CPLD driver"
|
||||
+ depends on AR71XX_MACH_RB4XX
|
||||
+ help
|
||||
+ SPI driver for the Xilinx CPLD chip present on the
|
||||
+ MikroTik RB4xx boards.
|
||||
+
|
||||
#
|
||||
# Add new SPI protocol masters in alphabetical order above this line
|
||||
#
|
||||
--- a/drivers/spi/Makefile
|
||||
+++ b/drivers/spi/Makefile
|
||||
@@ -39,6 +39,7 @@ obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.
|
||||
# ... add above this line ...
|
||||
|
||||
# SPI protocol drivers (device/link on bus)
|
||||
+obj-$(CONFIG_SPI_RB4XX_CPLD) += spi_rb4xx_cpld.o
|
||||
obj-$(CONFIG_SPI_SPIDEV) += spidev.o
|
||||
obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o
|
||||
# ... add above this line ...
|
@ -1,21 +0,0 @@
|
||||
--- a/drivers/mtd/nand/Kconfig
|
||||
+++ b/drivers/mtd/nand/Kconfig
|
||||
@@ -482,4 +482,8 @@ config MTD_NAND_W90P910
|
||||
This enables the driver for the NAND Flash on evaluation board based
|
||||
on w90p910.
|
||||
|
||||
+config MTD_NAND_RB4XX
|
||||
+ tristate "NAND flash driver for RouterBoard 4xx series"
|
||||
+ depends on MTD_NAND && AR71XX_MACH_RB4XX
|
||||
+
|
||||
endif # MTD_NAND
|
||||
--- a/drivers/mtd/nand/Makefile
|
||||
+++ b/drivers/mtd/nand/Makefile
|
||||
@@ -31,6 +31,7 @@ obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) +=
|
||||
obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
|
||||
obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
|
||||
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
|
||||
+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
|
||||
obj-$(CONFIG_MTD_ALAUDA) += alauda.o
|
||||
obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
|
||||
obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
|
@ -1,27 +0,0 @@
|
||||
--- a/drivers/spi/Makefile
|
||||
+++ b/drivers/spi/Makefile
|
||||
@@ -11,6 +11,7 @@ endif
|
||||
obj-$(CONFIG_SPI_MASTER) += spi.o
|
||||
|
||||
# SPI master controller drivers (bus)
|
||||
+obj-$(CONFIG_SPI_AP83) += ap83_spi.o
|
||||
obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o
|
||||
obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
|
||||
obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
|
||||
--- a/drivers/spi/Kconfig
|
||||
+++ b/drivers/spi/Kconfig
|
||||
@@ -53,6 +53,14 @@ if SPI_MASTER
|
||||
|
||||
comment "SPI Master Controller Drivers"
|
||||
|
||||
+config SPI_AP83
|
||||
+ tristate "Atheros AP83 specific SPI Controller"
|
||||
+ depends on SPI_MASTER && AR71XX_MACH_AP83
|
||||
+ select SPI_BITBANG
|
||||
+ help
|
||||
+ This is a specific SPI controller driver for the Atheros AP83
|
||||
+ reference board.
|
||||
+
|
||||
config SPI_AR71XX
|
||||
tristate "Atheros AR71xx SPI Controller"
|
||||
depends on SPI_MASTER && ATHEROS_AR71XX
|
@ -1,24 +0,0 @@
|
||||
--- a/drivers/spi/Kconfig
|
||||
+++ b/drivers/spi/Kconfig
|
||||
@@ -309,6 +309,11 @@ config SPI_RB4XX_CPLD
|
||||
SPI driver for the Xilinx CPLD chip present on the
|
||||
MikroTik RB4xx boards.
|
||||
|
||||
+config SPI_VSC7385
|
||||
+ tristate "Vitesse VSC7385 ethernet switch driver"
|
||||
+ help
|
||||
+ SPI driver for the Vitesse VSC7385 ethernet switch.
|
||||
+
|
||||
#
|
||||
# Add new SPI protocol masters in alphabetical order above this line
|
||||
#
|
||||
--- a/drivers/spi/Makefile
|
||||
+++ b/drivers/spi/Makefile
|
||||
@@ -42,6 +42,7 @@ obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.
|
||||
# SPI protocol drivers (device/link on bus)
|
||||
obj-$(CONFIG_SPI_RB4XX_CPLD) += spi_rb4xx_cpld.o
|
||||
obj-$(CONFIG_SPI_SPIDEV) += spidev.o
|
||||
+obj-$(CONFIG_SPI_VSC7385) += spi_vsc7385.o
|
||||
obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o
|
||||
# ... add above this line ...
|
||||
|
@ -1,27 +0,0 @@
|
||||
--- a/drivers/spi/Kconfig
|
||||
+++ b/drivers/spi/Kconfig
|
||||
@@ -68,6 +68,14 @@ config SPI_AR71XX
|
||||
help
|
||||
This is the SPI contoller driver for Atheros AR71xx.
|
||||
|
||||
+config SPI_PB44
|
||||
+ tristate "Atheros PB44 board specific SPI controller"
|
||||
+ depends on SPI_MASTER && AR71XX_MACH_PB44
|
||||
+ select SPI_BITBANG
|
||||
+ help
|
||||
+ This is a specific SPI controller driver for the Atheros PB44
|
||||
+ reference board.
|
||||
+
|
||||
config SPI_ATMEL
|
||||
tristate "Atmel SPI Controller"
|
||||
depends on (ARCH_AT91 || AVR32)
|
||||
--- a/drivers/spi/Makefile
|
||||
+++ b/drivers/spi/Makefile
|
||||
@@ -22,6 +22,7 @@ obj-$(CONFIG_SPI_GPIO) += spi_gpio.o
|
||||
obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o
|
||||
obj-$(CONFIG_SPI_IMX) += spi_imx.o
|
||||
obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o
|
||||
+obj-$(CONFIG_SPI_PB44) += pb44_spi.o
|
||||
obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
|
||||
obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o
|
||||
obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o
|
@ -1,26 +0,0 @@
|
||||
--- a/drivers/leds/Kconfig
|
||||
+++ b/drivers/leds/Kconfig
|
||||
@@ -236,6 +236,13 @@ config LEDS_BD2802
|
||||
This option enables support for BD2802GU RGB LED driver chips
|
||||
accessed via the I2C bus.
|
||||
|
||||
+config LEDS_WNDR3700_USB
|
||||
+ tristate "NETGEAR WNDR3700 USB LED driver"
|
||||
+ depends on LEDS_CLASS && AR71XX_MACH_WNDR3700
|
||||
+ help
|
||||
+ This option enables support for the USB LED found on the
|
||||
+ NETGEAR WNDR3700 board.
|
||||
+
|
||||
comment "LED Triggers"
|
||||
|
||||
config LEDS_TRIGGERS
|
||||
--- a/drivers/leds/Makefile
|
||||
+++ b/drivers/leds/Makefile
|
||||
@@ -29,6 +29,7 @@ obj-$(CONFIG_LEDS_DA903X) += leds-da903
|
||||
obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
|
||||
obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
|
||||
obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
|
||||
+obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o
|
||||
|
||||
# LED SPI Drivers
|
||||
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
|
@ -1,25 +0,0 @@
|
||||
--- a/drivers/gpio/Kconfig
|
||||
+++ b/drivers/gpio/Kconfig
|
||||
@@ -230,4 +230,12 @@ config GPIO_UCB1400
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called ucb1400_gpio.
|
||||
|
||||
+comment "Other GPIO expanders"
|
||||
+
|
||||
+config GPIO_NXP_74HC153
|
||||
+ tristate "NXP 74HC153 Dual 4-input multiplexer"
|
||||
+ help
|
||||
+ Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
|
||||
+ provides a GPIO interface supporting inputs.
|
||||
+
|
||||
endif
|
||||
--- a/drivers/gpio/Makefile
|
||||
+++ b/drivers/gpio/Makefile
|
||||
@@ -10,6 +10,7 @@ obj-$(CONFIG_GPIO_MAX7301) += max7301.o
|
||||
obj-$(CONFIG_GPIO_MAX732X) += max732x.o
|
||||
obj-$(CONFIG_GPIO_MC33880) += mc33880.o
|
||||
obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o
|
||||
+obj-$(CONFIG_GPIO_NXP_74HC153) += nxp_74hc153.o
|
||||
obj-$(CONFIG_GPIO_PCA953X) += pca953x.o
|
||||
obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o
|
||||
obj-$(CONFIG_GPIO_PL061) += pl061.o
|
@ -1,23 +0,0 @@
|
||||
--- a/drivers/leds/Kconfig
|
||||
+++ b/drivers/leds/Kconfig
|
||||
@@ -243,6 +243,10 @@ config LEDS_WNDR3700_USB
|
||||
This option enables support for the USB LED found on the
|
||||
NETGEAR WNDR3700 board.
|
||||
|
||||
+config LEDS_RB750
|
||||
+ tristate "LED driver for the Mikrotik RouterBOARD 750"
|
||||
+ depends on LEDS_CLASS && AR71XX_MACH_RB750
|
||||
+
|
||||
comment "LED Triggers"
|
||||
|
||||
config LEDS_TRIGGERS
|
||||
--- a/drivers/leds/Makefile
|
||||
+++ b/drivers/leds/Makefile
|
||||
@@ -30,6 +30,7 @@ obj-$(CONFIG_LEDS_WM831X_STATUS) += leds
|
||||
obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
|
||||
obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
|
||||
obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o
|
||||
+obj-${CONFIG_LEDS_RB750} += leds-rb750.o
|
||||
|
||||
# LED SPI Drivers
|
||||
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
|
@ -1,21 +0,0 @@
|
||||
--- a/drivers/mtd/nand/Kconfig
|
||||
+++ b/drivers/mtd/nand/Kconfig
|
||||
@@ -486,4 +486,8 @@ config MTD_NAND_RB4XX
|
||||
tristate "NAND flash driver for RouterBoard 4xx series"
|
||||
depends on MTD_NAND && AR71XX_MACH_RB4XX
|
||||
|
||||
+config MTD_NAND_RB750
|
||||
+ tristate "NAND flash driver for the RouterBoard 750"
|
||||
+ depends on MTD_NAND && AR71XX_MACH_RB750
|
||||
+
|
||||
endif # MTD_NAND
|
||||
--- a/drivers/mtd/nand/Makefile
|
||||
+++ b/drivers/mtd/nand/Makefile
|
||||
@@ -32,6 +32,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx
|
||||
obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
|
||||
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
|
||||
obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
|
||||
+obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o
|
||||
obj-$(CONFIG_MTD_ALAUDA) += alauda.o
|
||||
obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
|
||||
obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
|
@ -1,22 +0,0 @@
|
||||
--- a/arch/mips/Makefile
|
||||
+++ b/arch/mips/Makefile
|
||||
@@ -178,6 +178,7 @@ endif
|
||||
#
|
||||
libs-$(CONFIG_ARC) += arch/mips/fw/arc/
|
||||
libs-$(CONFIG_CFE) += arch/mips/fw/cfe/
|
||||
+libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/
|
||||
libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/
|
||||
libs-y += arch/mips/fw/lib/
|
||||
|
||||
--- a/arch/mips/Kconfig
|
||||
+++ b/arch/mips/Kconfig
|
||||
@@ -880,6 +880,9 @@ config MIPS_NILE4
|
||||
config MIPS_DISABLE_OBSOLETE_IDE
|
||||
bool
|
||||
|
||||
+config MYLOADER
|
||||
+ bool
|
||||
+
|
||||
config SYNC_R4K
|
||||
bool
|
||||
|
@ -1,29 +0,0 @@
|
||||
--- a/arch/mips/kernel/traps.c
|
||||
+++ b/arch/mips/kernel/traps.c
|
||||
@@ -48,6 +48,7 @@
|
||||
#include <asm/types.h>
|
||||
#include <asm/stacktrace.h>
|
||||
#include <asm/irq.h>
|
||||
+#include <asm/time.h>
|
||||
|
||||
extern void check_wait(void);
|
||||
extern asmlinkage void r4k_wait(void);
|
||||
@@ -1537,6 +1538,8 @@ void __cpuinit per_cpu_trap_init(void)
|
||||
*/
|
||||
if (cpu_has_mips_r2) {
|
||||
cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
|
||||
+ if (get_c0_compare_irq)
|
||||
+ cp0_compare_irq = get_c0_compare_irq();
|
||||
cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
|
||||
if (cp0_perfcount_irq == cp0_compare_irq)
|
||||
cp0_perfcount_irq = -1;
|
||||
--- a/arch/mips/include/asm/time.h
|
||||
+++ b/arch/mips/include/asm/time.h
|
||||
@@ -52,6 +52,7 @@ extern int (*perf_irq)(void);
|
||||
*/
|
||||
#ifdef CONFIG_CEVT_R4K_LIB
|
||||
extern unsigned int __weak get_c0_compare_int(void);
|
||||
+extern unsigned int __weak get_c0_compare_irq(void);
|
||||
extern int r4k_clockevent_init(void);
|
||||
#endif
|
||||
|
@ -1,80 +0,0 @@
|
||||
--- a/drivers/net/ag71xx/ag71xx_main.c
|
||||
+++ b/drivers/net/ag71xx/ag71xx_main.c
|
||||
@@ -686,6 +686,7 @@ err_drop:
|
||||
|
||||
static int ag71xx_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
|
||||
{
|
||||
+ struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data;
|
||||
struct ag71xx *ag = netdev_priv(dev);
|
||||
int ret;
|
||||
|
||||
@@ -717,7 +718,7 @@ static int ag71xx_do_ioctl(struct net_de
|
||||
if (ag->phy_dev == NULL)
|
||||
break;
|
||||
|
||||
- return phy_mii_ioctl(ag->phy_dev, ifr, cmd);
|
||||
+ return phy_mii_ioctl(ag->phy_dev, data, cmd);
|
||||
|
||||
default:
|
||||
break;
|
||||
--- a/drivers/spi/ap83_spi.c
|
||||
+++ b/drivers/spi/ap83_spi.c
|
||||
@@ -127,34 +127,33 @@ static void ap83_spi_chipselect(struct s
|
||||
|
||||
#define EXPAND_BITBANG_TXRX
|
||||
#include <linux/spi/spi_bitbang.h>
|
||||
-#include "spi_bitbang_txrx.h"
|
||||
|
||||
static u32 ap83_spi_txrx_mode0(struct spi_device *spi,
|
||||
unsigned nsecs, u32 word, u8 bits)
|
||||
{
|
||||
dev_dbg(&spi->dev, "TXRX0 word=%08x, bits=%u\n", word, bits);
|
||||
- return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
|
||||
+ return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
|
||||
}
|
||||
|
||||
static u32 ap83_spi_txrx_mode1(struct spi_device *spi,
|
||||
unsigned nsecs, u32 word, u8 bits)
|
||||
{
|
||||
dev_dbg(&spi->dev, "TXRX1 word=%08x, bits=%u\n", word, bits);
|
||||
- return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits);
|
||||
+ return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
|
||||
}
|
||||
|
||||
static u32 ap83_spi_txrx_mode2(struct spi_device *spi,
|
||||
unsigned nsecs, u32 word, u8 bits)
|
||||
{
|
||||
dev_dbg(&spi->dev, "TXRX2 word=%08x, bits=%u\n", word, bits);
|
||||
- return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits);
|
||||
+ return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
|
||||
}
|
||||
|
||||
static u32 ap83_spi_txrx_mode3(struct spi_device *spi,
|
||||
unsigned nsecs, u32 word, u8 bits)
|
||||
{
|
||||
dev_dbg(&spi->dev, "TXRX3 word=%08x, bits=%u\n", word, bits);
|
||||
- return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits);
|
||||
+ return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
|
||||
}
|
||||
|
||||
static int ap83_spi_probe(struct platform_device *pdev)
|
||||
--- a/drivers/watchdog/ar71xx_wdt.c
|
||||
+++ b/drivers/watchdog/ar71xx_wdt.c
|
||||
@@ -146,7 +146,7 @@ static struct watchdog_info ar71xx_wdt_i
|
||||
.identity = "AR71XX watchdog",
|
||||
};
|
||||
|
||||
-static long ar71xx_wdt_ioctl(struct file *file,
|
||||
+static int ar71xx_wdt_ioctl(struct inode *inode, struct file *file,
|
||||
unsigned int cmd, unsigned long arg)
|
||||
{
|
||||
int t;
|
||||
@@ -197,7 +197,7 @@ static long ar71xx_wdt_ioctl(struct file
|
||||
static const struct file_operations ar71xx_wdt_fops = {
|
||||
.owner = THIS_MODULE,
|
||||
.write = ar71xx_wdt_write,
|
||||
- .unlocked_ioctl = ar71xx_wdt_ioctl,
|
||||
+ .ioctl = ar71xx_wdt_ioctl,
|
||||
.open = ar71xx_wdt_open,
|
||||
.release = ar71xx_wdt_release,
|
||||
};
|
Loading…
Reference in New Issue
Block a user