mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 14:37:57 +00:00
mediatek: add support for Buffalo WSR-3200AX4S
Buffalo WSR-3200AX4S is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on
MT7622B.
Specification:
- SoC : MediaTek MT7622B
- RAM : DDR3 512 MiB
- Flash : SPI-NAND 128 MiB (Winbond W25N01GVZEIG)
- WLAN : 2.4/5 GHz 4T4R
- 2.4 GHz : MediaTek MT7622B (SoC)
- 5 GHz : MediaTek MT7915
- Ethernet : 5x 10/100/1000 Mbps
- Switch : MediaTek MT7531
- LEDs/Keys : 6x/5x (2x: buttons, 3x: slide-switches)
- UART : through-hole on PCB (J4)
- assignment: 3.3V, GND, TX, RX from tri-angle marking
- settings : 115200n8
- Power : 12 VDC, 1.5 A
Flash instruction using factory.bin image:
1. Boot WSR-3200AX4S with "Router" mode
2. Access to "http://192.168.11.1/" and open firmware update page
("ファームウェア更新")
3. Select the OpenWrt factory.bin image and click update ("更新実行")
button
4. Wait ~120 seconds to complete flashing
Note:
- This device has 2x OS images on flash. The first one will always be
used for booting and the secondary is for backup.
- This support generates multiple factory*.bin image:
- factory.bin : for flashing from OEM WebUI
- factory-uboot.bin: for flashing from U-Boot or clean installation
via sysupgrade (don't use for normal sysupgrade)
Known issues:
- Wi-Fi MAC addresses won't be applied to each adapter.
MAC Addresses:
LAN : C4:3C:EA:xx:xx:60 (board_data, mac (text))
WAN : C4:3C:EA:xx:xx:60 (board_data, mac (text))
2.4 GHz: C4:3C:EA:xx:xx:61
5 GHz : C4:3C:EA:xx:xx:68
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
(cherry picked from commit 7383eb266b)
This commit is contained in:
INAGAKI Hiroshi
Daniel Golle
parent
65f9f3131e
commit
5b4df9a27e
175
target/linux/mediatek/dts/mt7622-buffalo-wsr-3200ax4s.dts
Normal file
175
target/linux/mediatek/dts/mt7622-buffalo-wsr-3200ax4s.dts
Normal file
@ -0,0 +1,175 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7622-buffalo-wsr.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Buffalo WSR-3200AX4S";
|
||||
compatible = "buffalo,wsr-3200ax4s", "mediatek,mt7622";
|
||||
|
||||
memory {
|
||||
reg = <0 0x40000000 0 0x1f000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pio {
|
||||
/* Serial NAND is shared pin with SPI-NOR */
|
||||
serial_nand_pins: serial-nand-pins {
|
||||
mux {
|
||||
function = "flash";
|
||||
groups = "snfi";
|
||||
};
|
||||
|
||||
conf-cmd-dat {
|
||||
pins = "SPI_WP", "SPI_HOLD", "SPI_MOSI",
|
||||
"SPI_MISO", "SPI_CS";
|
||||
input-enable;
|
||||
drive-strength = <16>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
conf-clk {
|
||||
pins = "SPI_CLK";
|
||||
drive-strength = <16>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
switch@1f {
|
||||
compatible = "mediatek,mt7531";
|
||||
reg = <0x1f>;
|
||||
reset-gpios = <&pio 54 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
label = "wan";
|
||||
};
|
||||
|
||||
port@6 {
|
||||
reg = <6>;
|
||||
label = "cpu";
|
||||
ethernet = <&gmac0>;
|
||||
phy-connection-type = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&snfi {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&serial_nand_pins>;
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "spi-nand";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <104000000>;
|
||||
nand-ecc-engine = <&snfi>;
|
||||
mediatek,bmt-v2;
|
||||
mediatek,bmt-table-size = <0x1000>;
|
||||
/*
|
||||
* - Preloader - (kernel (6MiB, in firmware))
|
||||
* - Kernel2 - WTB
|
||||
*/
|
||||
mediatek,bmt-remap-range = <0x0 0x8c0000>,
|
||||
<0x1ac0000 0x5200000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "Preloader";
|
||||
reg = <0x0 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
label = "ATF";
|
||||
reg = <0x80000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@c0000 {
|
||||
label = "u-boot";
|
||||
reg = <0xc0000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@140000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x140000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@1c0000 {
|
||||
label = "factory";
|
||||
reg = <0x1c0000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@2c0000 {
|
||||
compatible = "brcm,trx";
|
||||
brcm,trx-magic = <0x33504844>;
|
||||
label = "firmware";
|
||||
reg = <0x2c0000 0x1800000>;
|
||||
};
|
||||
|
||||
partition@1ac0000 {
|
||||
label = "Kernel2";
|
||||
reg = <0x1ac0000 0x1800000>;
|
||||
};
|
||||
|
||||
partition@32c0000 {
|
||||
label = "glbcfg";
|
||||
reg = <0x32c0000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@34c0000 {
|
||||
label = "board_data";
|
||||
reg = <0x34c0000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@36c0000 {
|
||||
label = "WTB";
|
||||
reg = <0x36c0000 0x3600000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -128,6 +128,37 @@ define Device/buffalo_wsr-2533dhp2
|
||||
endef
|
||||
TARGET_DEVICES += buffalo_wsr-2533dhp2
|
||||
|
||||
define Device/buffalo_wsr-3200ax4s
|
||||
DEVICE_VENDOR := Buffalo
|
||||
DEVICE_MODEL := WSR-3200AX4S
|
||||
DEVICE_DTS := mt7622-buffalo-wsr-3200ax4s
|
||||
IMAGE_SIZE := 24576k
|
||||
BUFFALO_TRX_MAGIC := 0x33504844
|
||||
DEVICE_PACKAGES := kmod-mt7915-firmware
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
KERNEL_SIZE := 6144k
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
UBINIZE_OPTS := -E 5
|
||||
BUFFALO_TAG_PLATFORM := MTK
|
||||
BUFFALO_TAG_VERSION := 9.99
|
||||
BUFFALO_TAG_MINOR := 9.99
|
||||
IMAGES += factory.bin factory-uboot.bin
|
||||
KERNEL_INITRAMFS = kernel-bin | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | \
|
||||
buffalo-trx
|
||||
IMAGE/factory.bin = append-ubi | \
|
||||
buffalo-trx $$$$(BUFFALO_TRX_MAGIC) $$$$@ $(KDIR)/ubi_mark | \
|
||||
buffalo-enc $$(DEVICE_MODEL) $$(BUFFALO_TAG_VERSION) -l | \
|
||||
buffalo-tag-dhp $$(DEVICE_MODEL) JP JP | buffalo-enc-tag -l | buffalo-dhp-image
|
||||
IMAGE/factory-uboot.bin := append-ubi | \
|
||||
buffalo-trx $$$$(BUFFALO_TRX_MAGIC) $$$$@ $(KDIR)/ubi_mark
|
||||
IMAGE/sysupgrade.bin := \
|
||||
buffalo-trx $$$$(BUFFALO_TRX_MAGIC) $(KDIR)/tmp/$$(DEVICE_NAME).null | \
|
||||
sysupgrade-tar kernel=$$$$@ | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += buffalo_wsr-3200ax4s
|
||||
|
||||
define Device/elecom_wrc-2533gent
|
||||
DEVICE_VENDOR := Elecom
|
||||
DEVICE_MODEL := WRC-2533GENT
|
||||
|
||||
@ -9,6 +9,7 @@ mediatek_setup_interfaces()
|
||||
|
||||
case $board in
|
||||
bananapi,bpi-r64|\
|
||||
buffalo,wsr-3200ax4s|\
|
||||
elecom,wrc-x3200gst3|\
|
||||
linksys,e8450|\
|
||||
linksys,e8450-ubi|\
|
||||
@ -55,6 +56,11 @@ mediatek_setup_macs()
|
||||
local label_mac=""
|
||||
|
||||
case $board in
|
||||
buffalo,wsr-3200ax4s)
|
||||
lan_mac=$(mtd_get_mac_ascii board_data "mac")
|
||||
wan_mac=$lan_mac
|
||||
label_mac=$lan_mac
|
||||
;;
|
||||
reyee,ax3200-e5|\
|
||||
ruijie,rg-ew3200gx-pro)
|
||||
lan_mac=$(macaddr_add $(get_mac_label) 1)
|
||||
|
||||
@ -13,6 +13,11 @@ case "$board" in
|
||||
bananapi,bpi-r64)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $(cat /sys/class/net/eth0/address) 2 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
buffalo,wsr-3200ax4s)
|
||||
basemac=$(mtd_get_mac_ascii board_data "mac")
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $basemac 1 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $basemac 8 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
reyee,ax3200-e5|\
|
||||
ruijie,rg-ew3200gx-pro)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $(get_mac_label) 3 > /sys${DEVPATH}/macaddress
|
||||
|
||||
@ -7,4 +7,8 @@ buffalo,wsr-2533dhp2)
|
||||
mtd -M 0x44485032 ${kernel_size:+-c 0x$kernel_size} fixtrx firmware && exit 0
|
||||
exit 1
|
||||
;;
|
||||
buffalo,wsr-3200ax4s)
|
||||
mtd -M 0x44485033 ${kernel_size:+-c 0x$kernel_size} fixtrx firmware && exit 0
|
||||
exit 1
|
||||
;;
|
||||
esac
|
||||
|
||||
@ -21,7 +21,8 @@ platform_do_upgrade() {
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
buffalo,wsr-2533dhp2)
|
||||
buffalo,wsr-2533dhp2|\
|
||||
buffalo,wsr-3200ax4s)
|
||||
local magic="$(get_magic_long "$1")"
|
||||
|
||||
# use "mtd write" if the magic is "DHP2 (0x44485032)"
|
||||
@ -67,7 +68,8 @@ platform_check_image() {
|
||||
[ "$#" -gt 1 ] && return 1
|
||||
|
||||
case "$board" in
|
||||
buffalo,wsr-2533dhp2)
|
||||
buffalo,wsr-2533dhp2|\
|
||||
buffalo,wsr-3200ax4s)
|
||||
buffalo_check_image "$board" "$magic" "$1" || return 1
|
||||
;;
|
||||
elecom,wrc-x3200gst3|\
|
||||
|
||||
Loading…
Reference in New Issue
Block a user