mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 23:42:43 +00:00
mediatek: update openembed som7981 support
The board has been redesigned due to previous hardware bugs (with other reasons maybe). Changes in new board: - Added a gpio beeper - Added a Atmel i2c eeprom - Added a Atmel i2c ECC accelerator - Added a Philips RTC module - Added two RS485 - Removed WPS button - Replaced USB3 port with M.2 B-key for LTE modules - Swapped GbE LEDs gpio Also assigned wifi mac with nvmem binding, added iface setup for failsafe, increased phy assert time for rtl8221b, and updated LED labels. Keeping compatibility for old version is not necessary here as only few samples were sent to those interested in it. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> Link: https://github.com/openwrt/openwrt/pull/17253 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Tianling Shen
Hauke Mehrtens
parent
9d434a8abf
commit
5a7fb834c7
@ -2,7 +2,8 @@ set_preinit_iface() {
|
||||
case $(board_name) in
|
||||
cudy,m3000-v1|\
|
||||
cudy,tr3000-v1|\
|
||||
glinet,gl-mt3000)
|
||||
glinet,gl-mt3000|\
|
||||
openembed,som7981)
|
||||
ip link set eth1 up
|
||||
ifname=eth1
|
||||
;;
|
||||
|
||||
@ -12,9 +12,10 @@
|
||||
compatible = "openembed,som7981", "mediatek,mt7981";
|
||||
|
||||
aliases {
|
||||
led-boot = &wlan2g_led;
|
||||
led-failsafe = &wlan2g_led;
|
||||
led-upgrade = &wlan2g_led;
|
||||
led-boot = &act_led;
|
||||
led-failsafe = &act_led;
|
||||
led-running = &act_led;
|
||||
led-upgrade = &act_led;
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
@ -26,6 +27,11 @@
|
||||
reg = <0 0x40000000 0 0x40000000>;
|
||||
};
|
||||
|
||||
beeper {
|
||||
compatible = "gpio-beeper";
|
||||
gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
@ -34,12 +40,6 @@
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
button-wps {
|
||||
label = "wps";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
@ -47,28 +47,27 @@
|
||||
|
||||
led-0 {
|
||||
function = LED_FUNCTION_LAN;
|
||||
color = <LED_COLOR_ID_AMBER>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&pio 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
function = LED_FUNCTION_LAN;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
color = <LED_COLOR_ID_AMBER>;
|
||||
gpios = <&pio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan2g_led: led-2 {
|
||||
function = LED_FUNCTION_WLAN_2GHZ;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
led-2 {
|
||||
function = LED_FUNCTION_PANIC;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&pio 34 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
panic-indicator;
|
||||
};
|
||||
|
||||
led-3 {
|
||||
function = LED_FUNCTION_WLAN_5GHZ;
|
||||
act_led: led-3 {
|
||||
function = LED_FUNCTION_ACTIVITY;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&pio 35 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -97,14 +96,38 @@
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <400000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
status = "okay";
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c64";
|
||||
reg = <0x50>;
|
||||
page-size = <32>;
|
||||
};
|
||||
|
||||
rtc@51 {
|
||||
compatible = "nxp,pcf8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
crypto@60 {
|
||||
compatible = "atmel,atecc508a";
|
||||
reg = <0x60>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio_bus {
|
||||
phy0: ethernet-phy@5 {
|
||||
reg = <5>;
|
||||
compatible = "ethernet-phy-ieee802.3-c45";
|
||||
phy-mode = "2500base-x";
|
||||
reset-gpios = <&pio 14 GPIO_ACTIVE_LOW>;
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <50000>;
|
||||
reset-assert-us = <15000>;
|
||||
reset-deassert-us = <68000>;
|
||||
realtek,aldps-enable;
|
||||
};
|
||||
};
|
||||
@ -184,6 +207,13 @@
|
||||
};
|
||||
|
||||
&pio {
|
||||
i2c0_pins: i2c0-pins {
|
||||
mux {
|
||||
function = "i2c";
|
||||
groups = "i2c0_1";
|
||||
};
|
||||
};
|
||||
|
||||
spi0_flash_pins: spi0-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
@ -202,12 +232,45 @@
|
||||
mediatek,pull-down-adv = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
uart1_pins: uart1-pins {
|
||||
mux {
|
||||
function = "uart";
|
||||
groups = "uart1_3";
|
||||
};
|
||||
};
|
||||
|
||||
uart2_pins: uart2-pins {
|
||||
mux {
|
||||
function = "uart";
|
||||
groups = "uart2_0_tx_rx";
|
||||
};
|
||||
};
|
||||
|
||||
wwan_rst_h: wwan-rst-h {
|
||||
pins = "GPIO_WPS";
|
||||
drive-strength = <8>;
|
||||
mediatek,pull-down-adv = <0>;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
@ -220,8 +283,16 @@
|
||||
nvmem-cells = <&eeprom_factory_0>;
|
||||
nvmem-cell-names = "eeprom";
|
||||
status = "okay";
|
||||
|
||||
band@1 {
|
||||
reg = <1>;
|
||||
nvmem-cells = <&macaddr_factory_a 0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
|
||||
&xhci {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wwan_rst_h>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -71,8 +71,8 @@ nradio,c8-668gl)
|
||||
ucidef_set_led_netdev "5g" "5G" "blue:indicator-0" "eth1" "link"
|
||||
;;
|
||||
openembed,som7981)
|
||||
ucidef_set_led_netdev "lanact" "LANACT" "green:lan" "eth1" "rx tx"
|
||||
ucidef_set_led_netdev "lanlink" "LANLINK" "amber:lan" "eth1" "link"
|
||||
ucidef_set_led_netdev "lanact" "LANACT" "amber:lan" "eth1" "rx tx"
|
||||
ucidef_set_led_netdev "lanlink" "LANLINK" "green:lan" "eth1" "link"
|
||||
;;
|
||||
openwrt,one)
|
||||
ucidef_set_led_netdev "wanact" "WANACT" "mdio-bus:0f:green:wan" "eth0" "rx tx"
|
||||
|
||||
@ -141,9 +141,6 @@ case "$board" in
|
||||
[ "$PHYNBR" = "0" ] && echo "$hw_mac_addr" > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $hw_mac_addr > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
openembed,som7981)
|
||||
[ "$PHYNBR" = "1" ] && cat /sys/class/net/eth0/address > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
qihoo,360t7)
|
||||
addr=$(mtd_get_mac_ascii factory lanMac)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
|
||||
|
||||
@ -1215,7 +1215,10 @@ define Device/openembed_som7981
|
||||
DEVICE_MODEL := SOM7981
|
||||
DEVICE_DTS := mt7981b-openembed-som7981
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3
|
||||
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware \
|
||||
kmod-crypto-hw-atmel kmod-eeprom-at24 kmod-gpio-beeper kmod-rtc-pcf8563 \
|
||||
kmod-usb-net-cdc-mbim kmod-usb-net-qmi-wwan kmod-usb-serial-option \
|
||||
kmod-usb3 uqmi
|
||||
UBINIZE_OPTS := -E 5
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
|
||||
Loading…
Reference in New Issue
Block a user