ar71xx: add WRTnode2Q support

Signed-off-by: KeLei Liang <xzmu@wrtnode.com>

target/linux/ar71xx/base-files/etc/board.d/02_network

@@ -400,7 +400,8 @@ routerstation|\
 tl-wr710n |\
 tl-wr720n-v3|\
 tl-wr810n |\
-wpe72)
+wpe72 |\
+wrtnode2q)
 	ucidef_set_interfaces_lan_wan "eth1" "eth0"
 	;;
 

target/linux/ar71xx/base-files/lib/ar71xx.sh

@@ -1052,6 +1052,9 @@ ar71xx_board_detect() {
 	*WRT400N)
 		name="wrt400n"
 		;;
+	*"WRTnode2Q board")
+		name="wrtnode2q"
+		;;
 	*"WZR-450HP2")
 		name="wzr-450hp2"
 		;;

target/linux/ar71xx/base-files/lib/upgrade/platform.sh

@@ -272,7 +272,8 @@ platform_check_image() {
 	unifiac-pro | \
 	unifi-outdoor | \
 	carambola2 | \
-	weio )
+	weio | \
+	wrtnode2q)
 		[ "$magic" != "2705" ] && {
 			echo "Invalid image type."
 			return 1

target/linux/ar71xx/config-4.4

@@ -190,6 +190,7 @@ CONFIG_ATH79_MACH_WPJ531=y
 CONFIG_ATH79_MACH_WPJ558=y
 CONFIG_ATH79_MACH_WRT160NL=y
 CONFIG_ATH79_MACH_WRT400N=y
+CONFIG_ATH79_MACH_WRTNODE2Q=y
 CONFIG_ATH79_MACH_WZR_450HP2=y
 CONFIG_ATH79_MACH_WZR_HP_AG300H=y
 CONFIG_ATH79_MACH_WZR_HP_G300NH=y

target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt

@@ -680,6 +680,16 @@ config ATH79_MACH_WRT400N
 	select ATH79_DEV_LEDS_GPIO
 	select ATH79_DEV_M25P80
 
+config ATH79_MACH_WRTNODE2Q
+	bool "WRTnode2Q board support"
+	select SOC_QCA953X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+
 config ATH79_MACH_R6100
 	bool "NETGEAR R6100 board support"
 	select SOC_AR934X

target/linux/ar71xx/files/arch/mips/ath79/Makefile

@@ -194,6 +194,7 @@ obj-$(CONFIG_ATH79_MACH_WPJ531)	+= mach-wpj531.o
 obj-$(CONFIG_ATH79_MACH_WPJ558)	+= mach-wpj558.o
 obj-$(CONFIG_ATH79_MACH_WRT160NL)	+= mach-wrt160nl.o
 obj-$(CONFIG_ATH79_MACH_WRT400N)	+= mach-wrt400n.o
+obj-$(CONFIG_ATH79_MACH_WRTNODE2Q)	+= mach-wrtnode2q.o
 obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH)	+= mach-wzr-hp-g300nh.o
 obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2)	+= mach-wzr-hp-g300nh2.o
 obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H)	+= mach-wzr-hp-ag300h.o

target/linux/ar71xx/files/arch/mips/ath79/mach-wrtnode2q.c

@@ -0,0 +1,126 @@
+/*
+ * WRTnode2Q board support
+ *
+ * Copyright (c) 2013 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2015 Kelei <xzmu@wrtnode.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define WRTNODE2Q_GPIO_LED_WLAN		12
+#define WRTNODE2Q_GPIO_LED_WPS		13
+#define WRTNODE2Q_GPIO_LED_STATUS		13
+
+#define WRTNODE2Q_GPIO_LED_WAN		4
+#define WRTNODE2Q_GPIO_LED_LAN1		16
+#define WRTNODE2Q_GPIO_LED_LAN2		15
+#define WRTNODE2Q_GPIO_LED_LAN3		14
+#define WRTNODE2Q_GPIO_LED_LAN4		11
+
+#define WRTNODE2Q_GPIO_BTN_WPS		17
+
+#define WRTNODE2Q_KEYS_POLL_INTERVAL	20	/* msecs */
+#define WRTNODE2Q_KEYS_DEBOUNCE_INTERVAL	(3 * WRTNODE2Q_KEYS_POLL_INTERVAL)
+
+#define WRTNODE2Q_MAC0_OFFSET		0
+#define WRTNODE2Q_WMAC_CALDATA_OFFSET	0x1000
+
+static struct gpio_led wrtnode2q_leds_gpio[] __initdata = {
+	{
+		.name		= "wrtnode2q:green:status",
+		.gpio		= WRTNODE2Q_GPIO_LED_STATUS,
+		.active_low	= 1,
+	},
+	{
+		.name		= "wrtnode2q:green:wlan",
+		.gpio		= WRTNODE2Q_GPIO_LED_WLAN,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_keys_button wrtnode2q_gpio_keys[] __initdata = {
+	{
+		.desc		= "WPS button",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.debounce_interval = WRTNODE2Q_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= WRTNODE2Q_GPIO_BTN_WPS,
+		.active_low	= 1,
+	},
+};
+
+static void __init wrtnode2q_gpio_led_setup(void)
+{
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(wrtnode2q_leds_gpio),
+			wrtnode2q_leds_gpio);
+	ath79_register_gpio_keys_polled(-1, WRTNODE2Q_KEYS_POLL_INTERVAL,
+			ARRAY_SIZE(wrtnode2q_gpio_keys),
+			wrtnode2q_gpio_keys);
+}
+
+static void __init wrtnode2q_setup(void)
+{
+	u8 *art = (u8 *) KSEG1ADDR(0x1f040000);
+
+	ath79_register_m25p80(NULL);
+
+	wrtnode2q_gpio_led_setup();
+
+	ath79_register_pci();
+	ath79_register_usb();
+
+	ath79_register_wmac(art + WRTNODE2Q_WMAC_CALDATA_OFFSET, NULL);
+
+	ath79_register_mdio(0, 0x0);
+	ath79_register_mdio(1, 0x0);
+
+	ath79_init_mac(ath79_eth0_data.mac_addr, art + WRTNODE2Q_MAC0_OFFSET, 0);
+	ath79_init_mac(ath79_eth1_data.mac_addr, art + WRTNODE2Q_MAC0_OFFSET, 1);
+
+	/* LAN ports */
+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+	ath79_eth1_data.speed = SPEED_1000;
+	ath79_eth1_data.duplex = DUPLEX_FULL;
+	ath79_switch_data.phy_poll_mask |= BIT(4);
+	ath79_switch_data.phy4_mii_en = 1;
+	ath79_register_eth(1);
+
+	/* WAN port */
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+	ath79_eth0_data.speed = SPEED_100;
+	ath79_eth0_data.duplex = DUPLEX_FULL;
+	ath79_eth0_data.phy_mask = BIT(4);
+	ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_WRTNODE2Q, "WRTNODE2Q", "WRTnode2Q board",
+	     wrtnode2q_setup);

target/linux/ar71xx/files/arch/mips/ath79/machtypes.h

@@ -255,6 +255,7 @@ enum ath79_mach_type {
 	ATH79_MACH_WPJ558,		/* Compex WPJ558 */
 	ATH79_MACH_WRT160NL,		/* Linksys WRT160NL */
 	ATH79_MACH_WRT400N,		/* Linksys WRT400N */
+	ATH79_MACH_WRTNODE2Q,		/* WRTnode2Q */
 	ATH79_MACH_WZR_HP_AG300H,	/* Buffalo WZR-HP-AG300H */
 	ATH79_MACH_WZR_HP_G300NH,	/* Buffalo WZR-HP-G300NH */
 	ATH79_MACH_WZR_HP_G300NH2,	/* Buffalo WZR-HP-G300NH2 */

target/linux/ar71xx/generic/profiles/wrtnode.mk

@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2009 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/WRTNODE2Q
+	NAME:=WRTnode2Q board
+	PACKAGES:=kmod-usb-core kmod-usb2 kmod-usb-storage
+endef
+
+define Profile/WRTNODE2Q/Description
+	Package set optimized for the WRTnode2Q board.
+endef
+
+$(eval $(call Profile,WRTNODE2Q))

target/linux/ar71xx/image/legacy.mk

@@ -314,6 +314,7 @@ zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(
 qihoo_c301_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata)
 yun_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6464k(rootfs),1280k(kernel),64k(nvram),64k(art),7744k@0x50000(firmware)
 yun_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14656k(rootfs),1280k(kernel),64k(nvram),64k(art),15936k@0x50000(firmware)
+wrtnode2q_mtdlayout=mtdparts=spi0.0:192k(u-boot),64k(u-boot-env),64k(art),1472k(kernel),14592k(rootfs),16064k@0x50000(firmware),16384k@0x0(fullflash)
 
 define Image/BuildKernel
 	cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
@@ -1026,6 +1027,7 @@ $(eval $(call SingleProfile,AthLzma,64k,WPJ344_16M,wpj344-16M,WPJ344,ttyS0,11520
 $(eval $(call SingleProfile,AthLzma,64k,DR344,dr344,DR344,ttyS0,115200,$$(dr344_mtdlayout),RKuImage))
 $(eval $(call SingleProfile,AthLzma,64k,WPJ531_16M,wpj531-16M,WPJ531,ttyS0,115200,$$(wpj531_mtdlayout_16M),KRuImage,65536))
 $(eval $(call SingleProfile,AthLzma,64k,WPJ558_16M,wpj558-16M,WPJ558,ttyS0,115200,$$(wpj558_mtdlayout_16M),KRuImage,65536))
+$(eval $(call SingleProfile,AthLzma,64k,WRTNODE2Q,wrtnode2q,WRTNODE2Q,ttyS0,115200,$$(wrtnode2q_mtdlayout),KRuImage))
 $(eval $(call SingleProfile,AthLzma,64k,YUN_8M,yun-8M,Yun,ttyATH0,250000,$$(yun_mtdlayout_8M),RKuImage))
 $(eval $(call SingleProfile,AthLzma,64k,YUN_16M,yun-16M,Yun,ttyATH0,250000,$$(yun_mtdlayout_16M),RKuImage))