mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 06:08:08 +00:00
ramips: add support for OpenFi 5Pro Travel Router
OpenFi 5Pro is a DualBand Travel Router, based on MT7621A. Specification: - Type : Travel Wi-Fi Router(built-in Type-C Power Cable) - Size : 63 x 93 x 24mm - Power : Internal Type-C Cable PD/DC 5V@2A - SoC : MediaTek MT7621A - RAM : DDR3 512 MB - Flash : SPI-NOR 64MB (W25Q512) - WLAN : 2.4/5GHz 2T2R (MediaTek MT7603e/MT7613) - Ethernet : 2x 10/100/1000Mbps - USB : 1 x USB 2.0 - SDHCI : 1 x TF Slot (Max 512GB) - LEDs : 3 x LEDs (GPIO#16 gpio#17 gpio#14) - Button : 1 x Reset (GPIO#18), 1 x WPS (GPIO#13) - UART : 1 x UART for Debug, 115200 8N1 (Pinout: GND TX RX 3.3V) - UART 2 : 1xUART2 (Pinout: GND TX2 RX2 3.3V ) How to upgrade image in uboot 1. press reset button when boot for 5sec. 2. access 192.168.21.1 in web ui. 3. select image and upload Signed-off-by: Sven Huang <1036456939@qq.com>
This commit is contained in:
Sven Huang
Hauke Mehrtens
parent
2da2705a44
commit
5560791bbd
188
target/linux/ramips/dts/mt7621_openfi_5pro.dts
Executable file
188
target/linux/ramips/dts/mt7621_openfi_5pro.dts
Executable file
@ -0,0 +1,188 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
compatible = "openfi,5pro", "mediatek,mt7621-soc";
|
||||
model = "OpenFi 5Pro";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_system_blue;
|
||||
led-failsafe = &led_system_blue;
|
||||
led-running = &led_system_blue;
|
||||
led-upgrade = &led_system_blue;
|
||||
label-mac-device = &gmac0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_system_blue: led-0 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_WAN_ONLINE;
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-2 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_WLAN;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>;
|
||||
broken-flash-reset;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "config";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_factory_0: eeprom@0 {
|
||||
reg = <0x0 0x400>;
|
||||
};
|
||||
|
||||
eeprom_factory_8000: eeprom@8000 {
|
||||
reg = <0x8000 0x4da8>;
|
||||
};
|
||||
|
||||
macaddr_factory_e000: macaddr@e000 {
|
||||
reg = <0xe000 0x6>;
|
||||
};
|
||||
|
||||
macaddr_factory_e006: macaddr@e006 {
|
||||
reg = <0xe006 0x6>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0x3fb0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
ieee80211-freq-limit = <2400000 2500000>;
|
||||
nvmem-cells = <&eeprom_factory_0>;
|
||||
nvmem-cell-names = "eeprom";
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
nvmem-cells = <&eeprom_factory_8000>;
|
||||
nvmem-cell-names = "eeprom";
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
nvmem-cells = <&macaddr_factory_e000>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
label = "wan";
|
||||
phy-handle = <ðphy0>;
|
||||
|
||||
nvmem-cells = <&macaddr_factory_e006>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
ðphy0 {
|
||||
/delete-property/ interrupts;
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@1 {
|
||||
status = "okay";
|
||||
label = "lan";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "jtag", "wdt";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
@ -2148,6 +2148,16 @@ define Device/netis_wf2881
|
||||
endef
|
||||
TARGET_DEVICES += netis_wf2881
|
||||
|
||||
define Device/openfi_5pro
|
||||
$(Device/dsa-migration)
|
||||
IMAGE_SIZE := 65216k
|
||||
DEVICE_VENDOR := OpenFi
|
||||
DEVICE_MODEL := 5Pro
|
||||
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap kmod-usb3 \
|
||||
kmod-sdhci-mt7620
|
||||
endef
|
||||
TARGET_DEVICES += openfi_5pro
|
||||
|
||||
define Device/oraybox_x3a
|
||||
$(Device/dsa-migration)
|
||||
$(Device/uimage-lzma-loader)
|
||||
|
||||
@ -66,6 +66,7 @@ ramips_setup_interfaces()
|
||||
;;
|
||||
asiarf,ap7621-001|\
|
||||
humax,e10|\
|
||||
openfi,5pro|\
|
||||
wavlink,ws-wn572hp3-4g|\
|
||||
winstars,ws-wn583a6)
|
||||
ucidef_set_interfaces_lan_wan "lan" "wan"
|
||||
|
||||
Loading…
Reference in New Issue
Block a user