From 53c2f174ad79397b53db0e52d43f44a0702a93da Mon Sep 17 00:00:00 2001 From: Zoltan HERPAI Date: Wed, 7 Jun 2023 12:13:11 +0200 Subject: [PATCH] uboot-sunxi: bump to 2023.04 Compile-tested: all boards Runtime-tested: - Cortex-A8: pcDuino - Cortex-A7: Bananapro, Bananapi M3 - Cortex-A53:Pine64+ Notes: - binman tries to add firmware for the SCP (system control processor), which we don't build, and is optional for the boot process on 64-bit. Disable this via setting the SCP envvar to /dev/null. For further info, see [1] . [1] https://github.com/u-boot/u-boot/blob/master/board/sunxi/README.sunxi64 Signed-off-by: Zoltan HERPAI --- package/boot/uboot-sunxi/Makefile | 6 +- .../003-add-theobroma-a31-pangolin.patch | 375 ------------------ .../patches/062-A20-improve-gmac-upload.patch | 2 +- .../063-fix-lime2-revK-add-micrel-PHY.patch | 44 -- ...1-sun6i-sync-PLL1-multdiv-with-Boot1.patch | 2 +- .../093-sun6i-fix-PLL-LDO-voltselect.patch | 6 +- .../100-sun6i-alternate-on-UART2.patch | 16 - .../101-sun6i-support-console-on-UART2.patch | 30 -- ...2-sunxi-make_CONS_INDEX-configurable.patch | 23 -- ...-environment-for-dtc-binary-location.patch | 2 +- .../patches/210-sunxi-deactivate-binman.patch | 37 -- .../230-disable-axp209-on-a13-olinuxino.diff | 19 - .../250-sun8i-h3-add-support-for-zeropi.patch | 148 ------- ...2-sunxi-h3-add-support-for-nanopi-r1.patch | 159 -------- ...nxi-h5-add-support-for-nanopi-r1s-h5.patch | 261 ------------ ...-arm-sunxi-increase-SYS_MALLOC_F_LEN.patch | 29 -- .../patches/300-force-pylibfdt-build.patch | 30 ++ 17 files changed, 39 insertions(+), 1150 deletions(-) delete mode 100644 package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch delete mode 100644 package/boot/uboot-sunxi/patches/063-fix-lime2-revK-add-micrel-PHY.patch delete mode 100644 package/boot/uboot-sunxi/patches/100-sun6i-alternate-on-UART2.patch delete mode 100644 package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch delete mode 100644 package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch delete mode 100644 package/boot/uboot-sunxi/patches/210-sunxi-deactivate-binman.patch delete mode 100644 package/boot/uboot-sunxi/patches/230-disable-axp209-on-a13-olinuxino.diff delete mode 100644 package/boot/uboot-sunxi/patches/250-sun8i-h3-add-support-for-zeropi.patch delete mode 100644 package/boot/uboot-sunxi/patches/253-sunxi-h5-add-support-for-nanopi-r1s-h5.patch delete mode 100644 package/boot/uboot-sunxi/patches/270-arm-sunxi-increase-SYS_MALLOC_F_LEN.patch create mode 100644 package/boot/uboot-sunxi/patches/300-force-pylibfdt-build.patch diff --git a/package/boot/uboot-sunxi/Makefile b/package/boot/uboot-sunxi/Makefile index 7cadf6ff32b..be4c8411a96 100644 --- a/package/boot/uboot-sunxi/Makefile +++ b/package/boot/uboot-sunxi/Makefile @@ -9,9 +9,9 @@ include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/kernel.mk -PKG_VERSION:=2020.07 +PKG_VERSION:=2023.04 -PKG_HASH:=c1f5bf9ee6bb6e648edbf19ce2ca9452f614b08a9f886f1a566aa42e8cf05f6a +PKG_HASH:=e31cac91545ff41b71cec5d8c22afd695645cd6e2a442ccdacacd60534069341 PKG_MAINTAINER:=Zoltan HERPAI @@ -392,7 +392,7 @@ UBOOT_TARGETS := \ UBOOT_CONFIGURE_VARS += USE_PRIVATE_LIBGCC=yes UBOOT_MAKE_FLAGS += \ - BL31=$(STAGING_DIR_IMAGE)/bl31_sunxi-$(ATF).bin + BL31=$(STAGING_DIR_IMAGE)/bl31_sunxi-$(ATF).bin SCP=/dev/null define Build/InstallDev $(INSTALL_DIR) $(STAGING_DIR_IMAGE) diff --git a/package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch b/package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch deleted file mode 100644 index fab06e6a8e7..00000000000 --- a/package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch +++ /dev/null @@ -1,375 +0,0 @@ ---- a/arch/arm/dts/Makefile -+++ b/arch/arm/dts/Makefile -@@ -475,6 +475,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ - sun6i-a31-m9.dtb \ - sun6i-a31-mele-a1000g-quad.dtb \ - sun6i-a31-mixtile-loftq.dtb \ -+ sun6i-a31-pangolin.dtb \ - sun6i-a31s-colorfly-e708-q1.dtb \ - sun6i-a31s-cs908.dtb \ - sun6i-a31s-inet-q972.dtb \ ---- a/arch/arm/dts/sun6i-a31.dtsi -+++ b/arch/arm/dts/sun6i-a31.dtsi -@@ -641,6 +641,11 @@ - function = "lcd0"; - }; - -+ i2c3_pins_a: i2c3@0 { -+ allwinner,pins = "PB5", "PB6"; -+ allwinner,function = "i2c3"; -+ }; -+ - mmc0_pins_a: mmc0@0 { - pins = "PF0", "PF1", "PF2", - "PF3", "PF4", "PF5"; ---- /dev/null -+++ b/arch/arm/dts/sun6i-a31-pangolin.dts -@@ -0,0 +1,292 @@ -+/* -+ * Copyright 2015, Theobroma Systems Design und Consulting GmbH -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This file is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+#include "sun6i-a31.dtsi" -+#include "sunxi-common-regulators.dtsi" -+ -+#include -+#include -+ -+/ { -+ model = "Theobroma Systems A31 Pangolin"; -+ compatible = "tsd,a31-pangolin", "allwinner,sun6i-a31"; -+ -+ aliases { -+ serial0 = &uart0; -+ serial2 = &uart2; -+ spi0 = &spi0; -+ spi1 = &spi1; -+ spi2 = &spi2; -+ spi3 = &spi3; -+ }; -+ -+ chosen { -+ stdout-path = "serial2:115200n8"; -+ }; -+}; -+ -+&ehci0 { -+ status = "okay"; -+}; -+ -+&ohci0 { -+ status = "okay"; -+}; -+ -+&ehci1 { -+ status = "okay"; -+}; -+ -+&ohci1 { -+ status = "okay"; -+}; -+ -+&ohci2 { -+ status = "okay"; -+}; -+ -+&gmac { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gmac_pins_rgmii_a>; -+ phy = <&phy1>; -+ phy-mode = "rgmii"; -+ snps,reset-gpio = <&pio 0 7 GPIO_ACTIVE_LOW>; -+ snps,reset-active-low; -+ snps,reset-delays-us = <0 10000 30000>; -+ status = "okay"; -+ -+ phy1: ethernet-phy@4 { -+ reg = <4>; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins_a>; -+ status = "okay"; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins_a>; -+ status = "okay"; -+}; -+ -+&i2c2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c2_pins_a>; -+ status = "okay"; -+}; -+ -+&i2c3 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c3_pins_a>; -+ status = "okay"; -+ -+ rtc_twi: rtc@6f { -+ compatible = "isil,isl1208"; -+ reg = <0x6f>; -+ }; -+ fan: fan@18 { -+ compatible = "ti,amc6821"; -+ reg = <0x18>; -+ cooling-min-state = <0>; -+ cooling-max-state = <9>; -+ #cooling-cells = <2>; -+ }; -+}; -+ -+&spi0 { -+ status = "okay"; -+ -+ flash: flash@0 { -+ compatible = "spansion,m25p40"; -+ spi-max-frequency = <16000000>; -+ spi-cpol; -+ spi-cpha; -+ }; -+}; -+ -+&spi1 { -+ status = "okay"; -+}; -+ -+&ir { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ir_pins_a>; -+ status = "okay"; -+}; -+ -+&mmc0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_pangolin>; -+ vmmc-supply = <®_vcc3v0>; -+ bus-width = <4>; -+ cd-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */ -+ status = "okay"; -+}; -+ -+&mmc0_pins_a { -+ /* external pull-ups missing for some pins */ -+ allwinner,pull = ; -+}; -+ -+&mmc2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc2_pins_a>; -+ vmmc-supply = <®_vcc3v0>; -+ bus-width = <8>; -+ non-removable; -+ status = "okay"; -+}; -+ -+&pio { -+ mmc0_cd_pin_pangolin: mmc0_cd_pin@0 { -+ allwinner,pins = "PC19"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ leds_pins_pangolin: led_pins@0 { -+ allwinner,pins = "PH7", "PC16"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ mmc2_pins_a: mmc2@0 { -+ allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11", -+ "PC12","PC13","PC14","PC15"; -+ allwinner,function = "mmc2"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+}; -+ -+&p2wi { -+ status = "okay"; -+ -+ axp221: pmic@68 { -+ compatible = "x-powers,axp221"; -+ reg = <0x68>; -+ interrupt-parent = <&nmi_intc>; -+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>; -+ interrupt-controller; -+ #interrupt-cells = <1>; -+ dcdc1-supply = <&vcc_3v0>; -+ dcdc5-supply = <&vcc_dram>; -+ -+ regulators { -+ x-powers,dcdc-freq = <3000>; -+ -+ vcc_3v0: dcdc1 { -+ regulator-always-on; -+ regulator-min-microvolt = <3000000>; -+ regulator-max-microvolt = <3000000>; -+ regulator-name = "vcc-3v0"; -+ }; -+ -+ vdd_cpu: dcdc2 { -+ regulator-always-on; -+ regulator-min-microvolt = <700000>; -+ regulator-max-microvolt = <1320000>; -+ regulator-name = "vdd-cpu"; -+ }; -+ -+ vdd_gpu: dcdc3 { -+ regulator-always-on; -+ regulator-min-microvolt = <700000>; -+ regulator-max-microvolt = <1320000>; -+ regulator-name = "vdd-gpu"; -+ }; -+ -+ vdd_sys_dll: dcdc4 { -+ regulator-always-on; -+ regulator-min-microvolt = <1100000>; -+ regulator-max-microvolt = <1100000>; -+ regulator-name = "vdd-sys-dll"; -+ }; -+ -+ vcc_dram: dcdc5 { -+ regulator-always-on; -+ regulator-min-microvolt = <1500000>; -+ regulator-max-microvolt = <1500000>; -+ regulator-name = "vcc-dram"; -+ }; -+ -+ vcc_wifi: aldo1 { -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-name = "vcc_wifi"; -+ }; -+ -+ avcc: aldo3 { -+ regulator-always-on; -+ regulator-min-microvolt = <3000000>; -+ regulator-max-microvolt = <3000000>; -+ regulator-name = "avcc"; -+ }; -+ }; -+ }; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins_a>; -+ status = "okay"; -+}; -+ -+&usb1_vbus_pin_a { -+ allwinner,pins = "PD23"; -+}; -+ -+®_usb1_vbus { -+ gpio = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD 23 */ -+ status = "okay"; -+}; -+ -+&usbphy { -+ status = "okay"; -+ usb1_vbus-supply = <®_usb1_vbus>; -+}; ---- /dev/null -+++ b/configs/pangolin_defconfig -@@ -0,0 +1,36 @@ -+CONFIG_SUNXI_PANGOLIN=y -+CONFIG_SPL=y -+CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII" -+CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-pangolin" -+CONFIG_VIDEO_VGA_VIA_LCD=y -+CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25" -+CONFIG_ARM=y -+CONFIG_ARCH_SUNXI=y -+CONFIG_MACH_SUN6I=y -+CONFIG_DRAM_CHANNELS=1 -+CONFIG_DRAM_CLK=360 -+CONFIG_DRAM_ZQ=70 -+CONFIG_AXP_DCDC1_VOLT=3300 -+CONFIG_AXP_ALDO1_VOLT=0 -+CONFIG_AXP_ALDO2_VOLT=1800 -+CONFIG_AXP_ALDO3_VOLT=3000 -+CONFIG_AXP_DLDO4_VOLT=3300 -+CONFIG_AXP_ELDO1_VOLT=1200 -+CONFIG_AXP_ELDO2_VOLT=2500 -+CONFIG_AXP_ELDO3_VOLT=3300 -+CONFIG_MMC_SUNXI_SLOT_EXTRA=2 -+CONFIG_CONS_INDEX=3 -+# Vbus gpio for usb1 -+CONFIG_USB1_VBUS_PIN="" -+# No Vbus gpio for usb2 -+CONFIG_USB2_VBUS_PIN="" -+CONFIG_USB=y -+CONFIG_DM_USB=y -+CONFIG_USB_EHCI=y -+CONFIG_USB_KEYBOARD=y -+CONFIG_DM_ETH=y -+CONFIG_CMD_IMLS=n -+CONFIG_ETH_DESIGNWARE=y -+CONFIG_DM_SPI=y -+CONFIG_DM_SPI_FLASH=y -+CONFIG_SUNXI_SPI=y ---- a/arch/arm/mach-sunxi/Kconfig -+++ b/arch/arm/mach-sunxi/Kconfig -@@ -896,6 +896,14 @@ config VIDEO_LCD_PANEL_I2C_SCL - Set the SCL pin for the LCD i2c interface. This takes a string in the - format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. - -+choice -+ prompt "Sunxi Board Variant" -+ optional -+ -+config SUNXI_PANGOLIN -+ bool "Theobroma A31 uQ7 Board" -+ -+endchoice - - # Note only one of these may be selected at a time! But hidden choices are - # not supported by Kconfig diff --git a/package/boot/uboot-sunxi/patches/062-A20-improve-gmac-upload.patch b/package/boot/uboot-sunxi/patches/062-A20-improve-gmac-upload.patch index 27b476472cf..13a703f307d 100644 --- a/package/boot/uboot-sunxi/patches/062-A20-improve-gmac-upload.patch +++ b/package/boot/uboot-sunxi/patches/062-A20-improve-gmac-upload.patch @@ -2,7 +2,7 @@ --- a/configs/A20-OLinuXino-Lime2_defconfig +++ b/configs/A20-OLinuXino-Lime2_defconfig -@@ -23,6 +23,7 @@ CONFIG_ETH_DESIGNWARE=y +@@ -26,6 +26,7 @@ CONFIG_ETH_DESIGNWARE=y CONFIG_RGMII=y CONFIG_MII=y CONFIG_SUN7I_GMAC=y diff --git a/package/boot/uboot-sunxi/patches/063-fix-lime2-revK-add-micrel-PHY.patch b/package/boot/uboot-sunxi/patches/063-fix-lime2-revK-add-micrel-PHY.patch deleted file mode 100644 index e1ed58ee0d2..00000000000 --- a/package/boot/uboot-sunxi/patches/063-fix-lime2-revK-add-micrel-PHY.patch +++ /dev/null @@ -1,44 +0,0 @@ ---- a/configs/A20-OLinuXino-Lime2-eMMC_defconfig -+++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig -@@ -8,6 +8,8 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2 - CONFIG_USB0_VBUS_PIN="PC17" - CONFIG_USB0_VBUS_DET="PH5" - CONFIG_I2C1_ENABLE=y -+CONFIG_PHY_MICREL=y -+CONFIG_PHY_MICREL_KSZ90X1=y - CONFIG_SATAPWR="PC3" - CONFIG_SPL_SPI_SUNXI=y - CONFIG_AHCI=y ---- a/configs/A20-OLinuXino-Lime2_defconfig -+++ b/configs/A20-OLinuXino-Lime2_defconfig -@@ -7,6 +7,8 @@ CONFIG_MMC0_CD_PIN="PH1" - CONFIG_USB0_VBUS_PIN="PC17" - CONFIG_USB0_VBUS_DET="PH5" - CONFIG_I2C1_ENABLE=y -+CONFIG_PHY_MICREL=y -+CONFIG_PHY_MICREL_KSZ90X1=y - CONFIG_SATAPWR="PC3" - CONFIG_AHCI=y - # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set ---- a/drivers/net/phy/micrel_ksz90x1.c -+++ b/drivers/net/phy/micrel_ksz90x1.c -@@ -14,6 +14,8 @@ - #include - #include - #include -+#include -+#include - - /* - * KSZ9021 - KSZ9031 common -@@ -344,6 +346,10 @@ static int ksz9031_phy_extwrite(struct p - static int ksz9031_config(struct phy_device *phydev) - { - int ret; -+ struct sunxi_ccm_reg *const ccm = -+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; -+ -+ setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_DELAY(4)); - - ret = ksz9031_of_config(phydev); - if (ret) diff --git a/package/boot/uboot-sunxi/patches/091-sun6i-sync-PLL1-multdiv-with-Boot1.patch b/package/boot/uboot-sunxi/patches/091-sun6i-sync-PLL1-multdiv-with-Boot1.patch index c637ccb792a..8605436b1ae 100644 --- a/package/boot/uboot-sunxi/patches/091-sun6i-sync-PLL1-multdiv-with-Boot1.patch +++ b/package/boot/uboot-sunxi/patches/091-sun6i-sync-PLL1-multdiv-with-Boot1.patch @@ -14,7 +14,7 @@ More specifically, the following settings are now used: --- a/arch/arm/mach-sunxi/clock_sun6i.c +++ b/arch/arm/mach-sunxi/clock_sun6i.c -@@ -114,11 +114,12 @@ void clock_set_pll1(unsigned int clk) +@@ -131,11 +131,12 @@ void clock_set_pll1(unsigned int clk) struct sunxi_ccm_reg * const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; const int p = 0; diff --git a/package/boot/uboot-sunxi/patches/093-sun6i-fix-PLL-LDO-voltselect.patch b/package/boot/uboot-sunxi/patches/093-sun6i-fix-PLL-LDO-voltselect.patch index c20db1352ed..b5fa2a14157 100644 --- a/package/boot/uboot-sunxi/patches/093-sun6i-fix-PLL-LDO-voltselect.patch +++ b/package/boot/uboot-sunxi/patches/093-sun6i-fix-PLL-LDO-voltselect.patch @@ -18,7 +18,7 @@ required setting for the PLL LDO is 1.37v as per the A31 manual. --- a/arch/arm/mach-sunxi/clock_sun6i.c +++ b/arch/arm/mach-sunxi/clock_sun6i.c -@@ -27,13 +27,26 @@ void clock_init_safe(void) +@@ -28,13 +28,26 @@ void clock_init_safe(void) struct sunxi_prcm_reg * const prcm = (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE; @@ -47,8 +47,8 @@ required setting for the PLL LDO is 1.37v as per the A31 manual. #endif #if defined(CONFIG_MACH_SUN8I_R40) || defined(CONFIG_MACH_SUN50I) ---- a/arch/arm/include/asm/arch-sunxi/prcm.h -+++ b/arch/arm/include/asm/arch-sunxi/prcm.h +--- a/arch/arm/include/asm/arch-sunxi/prcm_sun6i.h ++++ b/arch/arm/include/asm/arch-sunxi/prcm_sun6i.h @@ -110,13 +110,13 @@ #define PRCM_PLL_CTRL_LDO_OUT_MASK \ __PRCM_PLL_CTRL_LDO_OUT(0x7) diff --git a/package/boot/uboot-sunxi/patches/100-sun6i-alternate-on-UART2.patch b/package/boot/uboot-sunxi/patches/100-sun6i-alternate-on-UART2.patch deleted file mode 100644 index a7afa513041..00000000000 --- a/package/boot/uboot-sunxi/patches/100-sun6i-alternate-on-UART2.patch +++ /dev/null @@ -1,16 +0,0 @@ -From d7311b6e7cdd1fc0e92665188e650934718cb2b1 Mon Sep 17 00:00:00 2001 -From: Philipp Tomsich -Date: Tue, 16 Jun 2015 10:52:01 +0200 -Subject: sun6i: define alternate-function for UART2 on GPG - - ---- a/arch/arm/include/asm/arch-sunxi/gpio.h -+++ b/arch/arm/include/asm/arch-sunxi/gpio.h -@@ -190,6 +190,7 @@ enum sunxi_gpio_number { - #define SUN6I_GPG_SDC1 2 - #define SUN8I_GPG_SDC1 2 - #define SUN6I_GPG_TWI3 2 -+#define SUN6I_GPG_UART2 2 - #define SUN5I_GPG_UART1 4 - - #define SUN6I_GPH_PWM 2 diff --git a/package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch b/package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch deleted file mode 100644 index 4cbf0ea1d8a..00000000000 --- a/package/boot/uboot-sunxi/patches/101-sun6i-support-console-on-UART2.patch +++ /dev/null @@ -1,30 +0,0 @@ -From c058dfb69136d62f88ae8b121104bdb7ce2df03f Mon Sep 17 00:00:00 2001 -From: Philipp Tomsich -Date: Tue, 16 Jun 2015 10:53:11 +0200 -Subject: ARM: sun6i: Support console on UART2 (GPG6/GPG7) - - ---- a/arch/arm/mach-sunxi/board.c -+++ b/arch/arm/mach-sunxi/board.c -@@ -132,6 +132,10 @@ static int gpio_init(void) - sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG_UART1); - sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG_UART1); - sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP); -+#elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN6I) -+ sunxi_gpio_set_cfgpin(SUNXI_GPG(6), SUN6I_GPG_UART2); -+ sunxi_gpio_set_cfgpin(SUNXI_GPG(7), SUN6I_GPG_UART2); -+ sunxi_gpio_set_pull(SUNXI_GPG(7), SUNXI_GPIO_PULL_UP); - #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I) - sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_GPB_UART2); - sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_GPB_UART2); ---- a/include/configs/sunxi-common.h -+++ b/include/configs/sunxi-common.h -@@ -244,6 +244,8 @@ extern int soft_i2c_gpio_scl; - #endif - #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I) - #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200" -+#elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN6I) -+#define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200" - #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I) - #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200" - #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I) diff --git a/package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch b/package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch deleted file mode 100644 index b85e2af9fce..00000000000 --- a/package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 78d5fab8e345b1273ec8c22d06f1a1d27670b518 Mon Sep 17 00:00:00 2001 -From: Philipp Tomsich -Date: Tue, 16 Jun 2015 10:59:38 +0200 -Subject: ARM: sunxi: Make CONS_INDEX configurable - - ---- a/arch/arm/mach-sunxi/Kconfig -+++ b/arch/arm/mach-sunxi/Kconfig -@@ -559,6 +559,14 @@ config SYS_BOARD - config SYS_SOC - default "sunxi" - -+config CONS_INDEX -+ int "UART used for console" -+ range 1 5 -+ default 1 -+ ---help--- -+ Defines the UART port used for serial output. It starts at 1 so UART0 is 1, -+ UART1 is 2 and so on. -+ - config UART0_PORT_F - bool "UART0 on MicroSD breakout board" - default n diff --git a/package/boot/uboot-sunxi/patches/200-mkimage-check-environment-for-dtc-binary-location.patch b/package/boot/uboot-sunxi/patches/200-mkimage-check-environment-for-dtc-binary-location.patch index 8aeae91ef46..fcc30ce35cd 100644 --- a/package/boot/uboot-sunxi/patches/200-mkimage-check-environment-for-dtc-binary-location.patch +++ b/package/boot/uboot-sunxi/patches/200-mkimage-check-environment-for-dtc-binary-location.patch @@ -17,7 +17,7 @@ Cc: Simon Glass --- a/tools/fit_image.c +++ b/tools/fit_image.c -@@ -751,9 +751,14 @@ static int fit_handle_file(struct image_ +@@ -754,9 +754,14 @@ static int fit_handle_file(struct image_ } *cmd = '\0'; } else if (params->datafile) { diff --git a/package/boot/uboot-sunxi/patches/210-sunxi-deactivate-binman.patch b/package/boot/uboot-sunxi/patches/210-sunxi-deactivate-binman.patch deleted file mode 100644 index 48ddf6d318d..00000000000 --- a/package/boot/uboot-sunxi/patches/210-sunxi-deactivate-binman.patch +++ /dev/null @@ -1,37 +0,0 @@ -From def280c4792262a368c8861312dc6b376181021f Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Mon, 1 Jan 2018 23:10:56 +0100 -Subject: sunxi: deactivate binman - -Use the old way to generate the images instead of binman. -binman needs python with swig to avoid this host tool dependency use the -old way of generating images. ---- - Makefile | 7 ++++--- - 1 file changed, 4 insertions(+), 3 deletions(-) - ---- a/Makefile -+++ b/Makefile -@@ -1607,8 +1607,10 @@ endif - - ifneq ($(CONFIG_ARCH_SUNXI),) - ifeq ($(CONFIG_ARM64),) --u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE -- $(call if_changed,binman) -+OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \ -+ --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff -+u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE -+ $(call if_changed,pad_cat) - else - u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE - $(call if_changed,cat) ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -995,7 +995,6 @@ config ARCH_SOCFPGA - - config ARCH_SUNXI - bool "Support sunxi (Allwinner) SoCs" -- select BINMAN - select CMD_GPIO - select CMD_MMC if MMC - select CMD_USB if DISTRO_DEFAULTS diff --git a/package/boot/uboot-sunxi/patches/230-disable-axp209-on-a13-olinuxino.diff b/package/boot/uboot-sunxi/patches/230-disable-axp209-on-a13-olinuxino.diff deleted file mode 100644 index bc8bd144d6a..00000000000 --- a/package/boot/uboot-sunxi/patches/230-disable-axp209-on-a13-olinuxino.diff +++ /dev/null @@ -1,19 +0,0 @@ ---- a/configs/A13-OLinuXino_defconfig -+++ b/configs/A13-OLinuXino_defconfig -@@ -7,7 +7,6 @@ CONFIG_DRAM_EMR1=0 - CONFIG_MMC0_CD_PIN="PG0" - CONFIG_USB0_VBUS_DET="PG1" - CONFIG_USB1_VBUS_PIN="PG11" --CONFIG_AXP_GPIO=y - # CONFIG_VIDEO_HDMI is not set - CONFIG_VIDEO_VGA_VIA_LCD=y - CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y -@@ -20,7 +19,7 @@ CONFIG_CMD_USB_MASS_STORAGE=y - CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino" - CONFIG_DFU_RAM=y - CONFIG_FASTBOOT_CMD_OEM_FORMAT=y --CONFIG_AXP_ALDO3_VOLT=3300 -+CONFIG_SUNXI_NO_PMIC=y - CONFIG_CONS_INDEX=2 - CONFIG_USB_EHCI_HCD=y - CONFIG_USB_OHCI_HCD=y diff --git a/package/boot/uboot-sunxi/patches/250-sun8i-h3-add-support-for-zeropi.patch b/package/boot/uboot-sunxi/patches/250-sun8i-h3-add-support-for-zeropi.patch deleted file mode 100644 index 838d90a7b00..00000000000 --- a/package/boot/uboot-sunxi/patches/250-sun8i-h3-add-support-for-zeropi.patch +++ /dev/null @@ -1,148 +0,0 @@ -From 2527b24f39d8f27ba2fd922ca27a1f14119cfa1b Mon Sep 17 00:00:00 2001 -From: Yu-Tung Chang -Date: Sat, 19 Jun 2021 16:16:45 +0800 -Subject: [PATCH] sunxi: h3: Add initial ZeroPi support - -ZeroPi is a new board of high performance with low cost -designed by FriendlyElec., using the Allwinner H3 SOC. - -ZeroPi features -- Allwinner H3, Quad-core Cortex-A7@1.2GHz -- 256MB/512MB DDR3 RAM -- microsd slot -- 10/100/1000Mbps Ethernet -- Debug Serial Port -- DC 5V/2A power-supply - -Signed-off-by: Yu-Tung Chang -Reviewed-by: Andre Przywara -Signed-off-by: Andre Przywara ---- ---- a/arch/arm/dts/Makefile -+++ b/arch/arm/dts/Makefile -@@ -560,7 +560,8 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \ - sun8i-h3-orangepi-plus.dtb \ - sun8i-h3-orangepi-plus2e.dtb \ - sun8i-h3-orangepi-zero-plus2.dtb \ -- sun8i-h3-rervision-dvk.dtb -+ sun8i-h3-rervision-dvk.dtb \ -+ sun8i-h3-zeropi.dtb - dtb-$(CONFIG_MACH_SUN8I_R40) += \ - sun8i-r40-bananapi-m2-ultra.dtb \ - sun8i-v40-bananapi-m2-berry.dtb ---- /dev/null -+++ b/arch/arm/dts/sun8i-h3-zeropi.dts -@@ -0,0 +1,85 @@ -+/* -+ * Copyright (C) 2020 Yu-Tung Chang -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This file is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+#include "sun8i-h3-nanopi.dtsi" -+ -+/ { -+ model = "FriendlyARM ZeroPi"; -+ compatible = "friendlyarm,zeropi", "allwinner,sun8i-h3"; -+ -+ aliases { -+ ethernet0 = &emac; -+ }; -+ -+ reg_gmac_3v3: gmac-3v3 { -+ compatible = "regulator-fixed"; -+ regulator-name = "gmac-3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ startup-delay-us = <100000>; -+ enable-active-high; -+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ -+ }; -+}; -+ -+&external_mdio { -+ ext_rgmii_phy: ethernet-phy@7 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <7>; -+ }; -+}; -+ -+&emac { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&emac_rgmii_pins>; -+ phy-supply = <®_gmac_3v3>; -+ phy-handle = <&ext_rgmii_phy>; -+ phy-mode = "rgmii-id"; -+ -+ allwinner,leds-active-low; -+ status = "okay"; -+}; -+ -+&usb_otg { -+ status = "okay"; -+ dr_mode = "host"; -+}; ---- a/board/sunxi/MAINTAINERS -+++ b/board/sunxi/MAINTAINERS -@@ -508,3 +508,9 @@ YONES TOPTECH BS1078 V2 BOARD - M: Peter Korsgaard - S: Maintained - F: configs/Yones_Toptech_BS1078_V2_defconfig -+ -+ZEROPI BOARD -+M: Yu-Tung Chang -+S: Maintained -+F: configs/zeropi_defconfig -+F: arch/arm/dts/sun8i-h3-zeropi.dts ---- /dev/null -+++ b/configs/zeropi_defconfig -@@ -0,0 +1,13 @@ -+CONFIG_ARM=y -+CONFIG_ARCH_SUNXI=y -+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-zeropi" -+CONFIG_SPL=y -+CONFIG_MACH_SUN8I_H3=y -+CONFIG_DRAM_CLK=408 -+CONFIG_MACPWR="PD6" -+# CONFIG_VIDEO_DE2 is not set -+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -+CONFIG_CONSOLE_MUX=y -+CONFIG_SUN8I_EMAC=y -+CONFIG_USB_EHCI_HCD=y -+CONFIG_USB_OHCI_HCD=y diff --git a/package/boot/uboot-sunxi/patches/252-sunxi-h3-add-support-for-nanopi-r1.patch b/package/boot/uboot-sunxi/patches/252-sunxi-h3-add-support-for-nanopi-r1.patch index 5b3a68c602b..51b4d7d045b 100644 --- a/package/boot/uboot-sunxi/patches/252-sunxi-h3-add-support-for-nanopi-r1.patch +++ b/package/boot/uboot-sunxi/patches/252-sunxi-h3-add-support-for-nanopi-r1.patch @@ -12,165 +12,6 @@ Signed-off-by: Jayantajit Gogoi create mode 100644 arch/arm/dts/sun8i-h3-nanopi-r1.dts create mode 100644 configs/nanopi_r1_defconfig ---- a/arch/arm/dts/Makefile -+++ b/arch/arm/dts/Makefile -@@ -551,6 +551,7 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \ - sun8i-h3-nanopi-m1-plus.dtb \ - sun8i-h3-nanopi-neo.dtb \ - sun8i-h3-nanopi-neo-air.dtb \ -+ sun8i-h3-nanopi-r1.dtb \ - sun8i-h3-orangepi-2.dtb \ - sun8i-h3-orangepi-lite.dtb \ - sun8i-h3-orangepi-one.dtb \ ---- /dev/null -+++ b/arch/arm/dts/sun8i-h3-nanopi-r1.dts -@@ -0,0 +1,146 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -+/* -+ * Copyright (C) 2019 Igor Pecovnik -+ * Copyright (C) 2020 Jayantajit Gogoi -+ */ -+ -+/* NanoPi R1 is based on the NanoPi-H3 design from FriendlyARM */ -+#include "sun8i-h3-nanopi.dtsi" -+ -+/ { -+ model = "FriendlyARM NanoPi R1"; -+ compatible = "friendlyarm,nanopi-r1", "allwinner,sun8i-h3"; -+ -+ reg_gmac_3v3: gmac-3v3 { -+ compatible = "regulator-fixed"; -+ regulator-name = "gmac-3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ startup-delay-us = <100000>; -+ enable-active-high; -+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ vdd_cpux: gpio-regulator { -+ compatible = "regulator-gpio"; -+ pinctrl-names = "default"; -+ regulator-name = "vdd-cpux"; -+ regulator-type = "voltage"; -+ regulator-boot-on; -+ regulator-always-on; -+ regulator-min-microvolt = <1100000>; -+ regulator-max-microvolt = <1300000>; -+ regulator-ramp-delay = <50>; -+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; -+ gpios-states = <0x1>; -+ states = <1100000 0x0 -+ 1300000 0x1>; -+ }; -+ -+ wifi_pwrseq: wifi_pwrseq { -+ compatible = "mmc-pwrseq-simple"; -+ pinctrl-names = "default"; -+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; -+ }; -+ -+ leds { -+ /delete-node/ pwr; -+ status { -+ label = "nanopi:red:status"; -+ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "heartbeat"; -+ }; -+ -+ wan { -+ label = "nanopi:green:wan"; -+ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ lan { -+ label = "nanopi:green:lan"; -+ gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+ -+ r_gpio_keys { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sw_r_npi>; -+ -+ /delete-node/ k1; -+ reset { -+ label = "reset"; -+ linux,code = ; -+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+}; -+ -+&cpu0 { -+ cpu-supply = <&vdd_cpux>; -+}; -+ -+&ehci1 { -+ status = "okay"; -+}; -+ -+&ehci2 { -+ status = "okay"; -+}; -+ -+&emac { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&emac_rgmii_pins>; -+ phy-supply = <®_gmac_3v3>; -+ phy-handle = <&ext_rgmii_phy>; -+ phy-mode = "rgmii"; -+ status = "okay"; -+}; -+ -+&external_mdio { -+ ext_rgmii_phy: ethernet-phy@1 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <7>; -+ }; -+}; -+ -+&mmc1 { -+ vmmc-supply = <®_vcc3v3>; -+ vqmmc-supply = <®_vcc3v3>; -+ mmc-pwrseq = <&wifi_pwrseq>; -+ bus-width = <4>; -+ non-removable; -+ status = "okay"; -+ -+ sdio_wifi: sdio_wifi@1 { -+ reg = <1>; -+ compatible = "brcm,bcm4329-fmac"; -+ interrupt-parent = <&pio>; -+ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; -+ interrupt-names = "host-wake"; -+ }; -+}; -+ -+&mmc2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc2_8bit_pins>; -+ vmmc-supply = <®_vcc3v3>; -+ vqmmc-supply = <®_vcc3v3>; -+ bus-width = <8>; -+ non-removable; -+ status = "okay"; -+}; -+ -+&ohci1 { -+ status = "okay"; -+}; -+ -+&ohci2 { -+ status = "okay"; -+}; -+ -+&r_pio { -+ sw_r_npi: key_pins { -+ pins = "PL3"; -+ function = "gpio_in"; -+ }; -+}; --- /dev/null +++ b/configs/nanopi_r1_defconfig @@ -0,0 +1,21 @@ diff --git a/package/boot/uboot-sunxi/patches/253-sunxi-h5-add-support-for-nanopi-r1s-h5.patch b/package/boot/uboot-sunxi/patches/253-sunxi-h5-add-support-for-nanopi-r1s-h5.patch deleted file mode 100644 index 2c8d5a94593..00000000000 --- a/package/boot/uboot-sunxi/patches/253-sunxi-h5-add-support-for-nanopi-r1s-h5.patch +++ /dev/null @@ -1,261 +0,0 @@ -From e7510d24cab4741f72489b9d67c2d42b18fe5374 Mon Sep 17 00:00:00 2001 -From: Chukun Pan -Date: Sun, 10 Oct 2021 21:36:57 +0800 -Subject: [PATCH] sunxi: Add support for FriendlyARM NanoPi R1S H5 - -This adds support for the NanoPi R1S H5 board. - -Allwinner H5 SoC -512MB DDR3 RAM -10/100/1000M Ethernet x 2 -RTL8189ETV WiFi 802.11b/g/n -USB 2.0 host port (A) -MicroSD Slot -Reset button -Serial Debug Port -WAN - LAN - SYS LED - -Signed-off-by: Chukun Pan ---- - arch/arm/dts/Makefile | 1 + - arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts | 195 +++++++++++++++++++++++ - board/sunxi/MAINTAINERS | 5 + - configs/nanopi_r1s_h5_defconfig | 14 ++ - 4 files changed, 215 insertions(+) - create mode 100644 arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts - create mode 100644 configs/nanopi_r1s_h5_defconfig - ---- a/arch/arm/dts/Makefile -+++ b/arch/arm/dts/Makefile -@@ -575,6 +575,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \ - sun50i-h5-libretech-all-h5-cc.dtb \ - sun50i-h5-nanopi-neo2.dtb \ - sun50i-h5-nanopi-neo-plus2.dtb \ -+ sun50i-h5-nanopi-r1s-h5.dtb \ - sun50i-h5-orangepi-zero-plus.dtb \ - sun50i-h5-orangepi-pc2.dtb \ - sun50i-h5-orangepi-prime.dtb \ ---- /dev/null -+++ b/arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts -@@ -0,0 +1,190 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -+/* -+ * Copyright (C) 2021 Chukun Pan -+ * -+ * Based on sun50i-h5-nanopi-neo-plus2.dts, which is: -+ * Copyright (C) 2017 Antony Antony -+ * Copyright (C) 2016 ARM Ltd. -+ */ -+ -+/dts-v1/; -+#include "sun50i-h5.dtsi" -+ -+#include -+#include -+ -+/ { -+ model = "FriendlyARM NanoPi R1S H5"; -+ compatible = "friendlyarm,nanopi-r1s-h5", "allwinner,sun50i-h5"; -+ -+ aliases { -+ ethernet0 = &emac; -+ ethernet1 = &rtl8189etv; -+ serial0 = &uart0; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ sys { -+ label = "nanopi:red:sys"; -+ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "heartbeat"; -+ }; -+ -+ lan { -+ label = "nanopi:green:lan"; -+ gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wan { -+ label = "nanopi:green:wan"; -+ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+ -+ r-gpio-keys { -+ compatible = "gpio-keys"; -+ -+ reset { -+ label = "reset"; -+ linux,code = ; -+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ reg_gmac_3v3: gmac-3v3 { -+ compatible = "regulator-fixed"; -+ regulator-name = "gmac-3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ startup-delay-us = <100000>; -+ enable-active-high; -+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ reg_vcc3v3: vcc3v3 { -+ compatible = "regulator-fixed"; -+ regulator-name = "vcc3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ }; -+ -+ reg_usb0_vbus: usb0-vbus { -+ compatible = "regulator-fixed"; -+ regulator-name = "usb0-vbus"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ enable-active-high; -+ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ -+ status = "okay"; -+ }; -+ -+ vdd_cpux: gpio-regulator { -+ compatible = "regulator-gpio"; -+ regulator-name = "vdd-cpux"; -+ regulator-type = "voltage"; -+ regulator-boot-on; -+ regulator-always-on; -+ regulator-min-microvolt = <1100000>; -+ regulator-max-microvolt = <1300000>; -+ regulator-ramp-delay = <50>; /* 4ms */ -+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; -+ gpios-states = <0x1>; -+ states = <1100000 0x0>, <1300000 0x1>; -+ }; -+ -+ wifi_pwrseq: wifi_pwrseq { -+ compatible = "mmc-pwrseq-simple"; -+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ -+ post-power-on-delay-ms = <200>; -+ }; -+}; -+ -+&cpu0 { -+ cpu-supply = <&vdd_cpux>; -+}; -+ -+&ehci1 { -+ status = "okay"; -+}; -+ -+&ehci2 { -+ status = "okay"; -+}; -+ -+&emac { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&emac_rgmii_pins>; -+ phy-supply = <®_gmac_3v3>; -+ phy-handle = <&ext_rgmii_phy>; -+ phy-mode = "rgmii-id"; -+ status = "okay"; -+}; -+ -+&external_mdio { -+ ext_rgmii_phy: ethernet-phy@7 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <7>; -+ }; -+}; -+ -+&i2c0 { -+ status = "okay"; -+ -+ eeprom@51 { -+ compatible = "microchip,24c02"; -+ reg = <0x51>; -+ pagesize = <16>; -+ }; -+}; -+ -+&mmc0 { -+ vmmc-supply = <®_vcc3v3>; -+ bus-width = <4>; -+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ -+ status = "okay"; -+}; -+ -+&mmc1 { -+ vmmc-supply = <®_vcc3v3>; -+ vqmmc-supply = <®_vcc3v3>; -+ mmc-pwrseq = <&wifi_pwrseq>; -+ bus-width = <4>; -+ non-removable; -+ status = "okay"; -+ -+ rtl8189etv: sdio_wifi@1 { -+ reg = <1>; -+ }; -+}; -+ -+&ohci1 { -+ status = "okay"; -+}; -+ -+&ohci2 { -+ status = "okay"; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pa_pins>; -+ status = "okay"; -+}; -+ -+&usb_otg { -+ dr_mode = "peripheral"; -+ status = "okay"; -+}; -+ -+&usbphy { -+ /* USB Type-A port's VBUS is always on */ -+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ -+ usb0_vbus-supply = <®_usb0_vbus>; -+ status = "okay"; -+}; ---- a/board/sunxi/MAINTAINERS -+++ b/board/sunxi/MAINTAINERS -@@ -358,6 +358,11 @@ M: Jelle van der Waa - S: Maintained - F: configs/nanopi_neo_air_defconfig - -+NANOPI-R1S-H5 BOARD -+M: Chukun Pan -+S: Maintained -+F: configs/nanopi_r1s_h5_defconfig -+ - NANOPI-A64 BOARD - M: Jagan Teki - S: Maintained ---- /dev/null -+++ b/configs/nanopi_r1s_h5_defconfig -@@ -0,0 +1,14 @@ -+CONFIG_ARM=y -+CONFIG_ARCH_SUNXI=y -+CONFIG_SPL=y -+CONFIG_MACH_SUN50I_H5=y -+CONFIG_DRAM_CLK=672 -+CONFIG_DRAM_ZQ=3881977 -+# CONFIG_DRAM_ODT_EN is not set -+CONFIG_MACPWR="PD6" -+CONFIG_MMC_SUNXI_SLOT_EXTRA=2 -+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-nanopi-r1s-h5" -+CONFIG_SUN8I_EMAC=y -+CONFIG_USB_EHCI_HCD=y -+CONFIG_USB_OHCI_HCD=y diff --git a/package/boot/uboot-sunxi/patches/270-arm-sunxi-increase-SYS_MALLOC_F_LEN.patch b/package/boot/uboot-sunxi/patches/270-arm-sunxi-increase-SYS_MALLOC_F_LEN.patch deleted file mode 100644 index 6ce2be908db..00000000000 --- a/package/boot/uboot-sunxi/patches/270-arm-sunxi-increase-SYS_MALLOC_F_LEN.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 20abdd7feefbb4fccef5c653e045911670237e8b Mon Sep 17 00:00:00 2001 -From: Stijn Tintel -Date: Thu, 22 Dec 2022 00:35:07 +0200 -Subject: [PATCH] arm: sunxi: increase SYS_MALLOC_F_LEN - -Version 2020.10 throws the following output after loading bl31: -alloc space exhausted - -This has been fixed in v2022.07, but the change is too intrusive to -backport. Instead, just modify the default for ARCH_SUNXI for now. - -See e05689242238 ("Kconfig: Change SYS_MALLOC_F_LEN default to 0x2000"). - -Signed-off-by: Stijn Tintel ---- - Kconfig | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/Kconfig -+++ b/Kconfig -@@ -146,7 +146,7 @@ config SYS_MALLOC_F_LEN - default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \ - ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5 || \ - ARCH_LS1012A || ARCH_LS1021A || ARCH_LS1043A || \ -- ARCH_LS1046A || ARCH_QEMU) -+ ARCH_LS1046A || ARCH_QEMU || ARCH_SUNXI) - default 0x400 - help - Before relocation, memory is very limited on many platforms. Still, diff --git a/package/boot/uboot-sunxi/patches/300-force-pylibfdt-build.patch b/package/boot/uboot-sunxi/patches/300-force-pylibfdt-build.patch new file mode 100644 index 00000000000..d34ed6f2ae5 --- /dev/null +++ b/package/boot/uboot-sunxi/patches/300-force-pylibfdt-build.patch @@ -0,0 +1,30 @@ +--- a/Makefile ++++ b/Makefile +@@ -2000,26 +2000,7 @@ endif + # Check dtc and pylibfdt, if DTC is provided, else build them + PHONY += scripts_dtc + scripts_dtc: scripts_basic +- $(Q)if test "$(DTC)" = "$(DTC_INTREE)"; then \ +- $(MAKE) $(build)=scripts/dtc; \ +- else \ +- if ! $(DTC) -v >/dev/null; then \ +- echo '*** Failed to check dtc version: $(DTC)'; \ +- false; \ +- else \ +- if test "$(call dtc-version)" -lt $(DTC_MIN_VERSION); then \ +- echo '*** Your dtc is too old, please upgrade to dtc $(DTC_MIN_VERSION) or newer'; \ +- false; \ +- else \ +- if [ -n "$(CONFIG_PYLIBFDT)" ]; then \ +- if ! echo "import libfdt" | $(PYTHON3) 2>/dev/null; then \ +- echo '*** pylibfdt does not seem to be available with $(PYTHON3)'; \ +- false; \ +- fi; \ +- fi; \ +- fi; \ +- fi; \ +- fi ++ $(MAKE) $(build)=scripts/dtc + + # --------------------------------------------------------------------------- + quiet_cmd_cpp_lds = LDS $@